{"product_id":"citronic-cab-10-passive-pa-speaker-cabinet-220w","title":"Citronic CAB-10 Passive PA Speaker Cabinet 220W","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic CAB-10 is a full-range passive speaker cabinet built for compact, portable sound reinforcement. It houses a custom-designed low frequency woofer paired with a titanium compression driver, giving you a powerful yet balanced sound across the full range. The moulded polypropylene enclosure keeps the weight down while holding up to the knocks of regular gigging and hire work.\u003c\/p\u003e\n\u003cp\u003eGetting the CAB-10 into position is straightforward thanks to integral top and side carry handles, and a 35mm pole mount socket lets you fit it on a speaker stand or sub pole. Connection from your amplifier is made through a Speakon lead (a locking twist connector), with two SPK sockets on the rear panel so you can link a second cabinet without extra cabling. The dispersion is rated at 90 degrees horizontal by 60 degrees vertical, which spreads sound evenly across a typical room or small stage.\u003c\/p\u003e\n\u003cp\u003eBeing a passive cabinet, the CAB-10 needs a separate power amplifier rather than having one built in. It handles 220W RMS and presents an 8 Ohm load with the low and high frequency sections combined, so it pairs sensibly with most PA amplifiers. This makes it a practical choice for mobile DJs, bands, presentations and venues that want capable sound without heavy, bulky boxes. Whether you run a single cabinet or a stereo pair, the CAB-10 keeps setup quick and the sound clear.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e10.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e530mm x 310mm x 300mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrossover frequency\u003c\/td\u003e\n\u003ctd\u003e3.2kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSPL max.\u003c\/td\u003e\n\u003ctd\u003e116dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity @ 1W\/1m\u003c\/td\u003e\n\u003ctd\u003e93dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e58Hz - 19kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHF driver\u003c\/td\u003e\n\u003ctd\u003e35mmØ (1.00\") Ti CD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice coil\u003c\/td\u003e\n\u003ctd\u003e50mmØ (2.00\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLF driver\u003c\/td\u003e\n\u003ctd\u003e250mmØ (10\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower handling : rms\u003c\/td\u003e\n\u003ctd\u003e220W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing material\u003c\/td\u003e\n\u003ctd\u003eInjection moulded polypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e8 Ohm (LF+HF combined)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDispersion\u003c\/td\u003e\n\u003ctd\u003e90° x 60°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x SPK socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs the CAB-10 active or passive?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is a passive cabinet, so it needs a separate power amplifier to drive it. There is no built-in amp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat amplifier do I need for the CAB-10?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou need an amplifier that can drive an 8 Ohm load and supply around 220W RMS per channel for a comfortable match.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I connect the CAB-10 to my amplifier?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnection is via a Speakon lead into one of the two SPK sockets on the rear panel. The second socket lets you link another cabinet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mount the CAB-10 on a speaker stand?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It has a 35mm pole mount socket, so it fits standard speaker stands and sub poles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the sound coverage angles?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dispersion is 90 degrees horizontal by 60 degrees vertical, giving even coverage across most rooms and small stages.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271902814475,"sku":"178.011UK","price":169.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/178011UK_0.jpg?v=1785004717","url":"https:\/\/niori.co.uk\/products\/citronic-cab-10-passive-pa-speaker-cabinet-220w","provider":"Niori","version":"1.0","type":"link"}