{"product_id":"cct-adjustable-microwave-sensor-emergency-led-bulkhead-white","title":"CCT Adjustable Microwave Sensor Emergency LED Bulkhead - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is a round surface mounted bulkhead with a built in microwave sensor and an emergency function, finished in plain white with a gently domed white diffuser set into a deep circular body. The light source is an integrated LED, so there is no separate lamp to buy now or replace later. Three selectable colour temperature settings let one fitting cover warm, neutral and cooler light, which is useful when you are buying for several spaces at once and do not yet know which tone each one wants. It also carries a corridor function, the mode that holds a low standby output between detections rather than switching off completely.\u003c\/p\u003e\n\u003cp\u003eBulkheads like this one earn their keep in circulation spaces: communal hallways, stairwells and landings, garages, utility rooms, plant rooms and the back corridors of small commercial premises. The shallow round form sits close to the surface, so it stays out of the way where headroom is tight or where a hanging fitting would be knocked. Along a run of corridor with the sensor doing the switching, the light comes up as someone arrives and settles back once they have gone, which suits a route used in short bursts rather than lit all evening.\u003c\/p\u003e\n\u003cp\u003eA microwave sensor reads changes in a reflected radio signal rather than body heat, so it responds to movement across a wider spread than a passive infrared head and can sense through thin materials such as plasterboard and glazing. That is worth knowing before you site one near a stairwell opening or a thin partition. The manufacturer does not state the wattage, the lumen output, the Kelvin values, the detection range, the hold time or the duration of the emergency function, and no IP rating is given for it. Each order is for one fitting, with a minimum order of one.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRound surface mounted bulkhead with microwave sensor, corridor function and emergency function\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight source\u003c\/td\u003e\n\u003ctd\u003eIntegrated LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrightness\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour temperature\u003c\/td\u003e\n\u003ctd\u003eThree selectable settings; Kelvin values not stated by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam angle\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003e1 fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum order\u003c\/td\u003e\n\u003ctd\u003e1, sold in multiples of 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to buy a bulb for this?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The LED is integrated into the fitting, so there is no cap to match and no lamp to source separately when you install it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the corridor function actually do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInstead of switching fully off when the sensor times out, corridor function holds the fitting at a low standby output, so the route is never left dark between one person and the next. The manufacturer does not state the standby level or the hold time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is a microwave sensor different from a PIR?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA PIR looks for moving body heat. A microwave head reads changes in a reflected radio signal, so it covers a wider spread and can detect through thin materials such as plasterboard, glazing and light doors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many colour temperature settings does it have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThree, selected on the fitting, so one product covers warm through to cooler light across different spaces. The manufacturer does not print the Kelvin figures for the three settings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens during a mains failure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting carries an emergency function, so it goes on giving light when the mains supply drops. The manufacturer does not state the emergency duration or the battery type, so confirm those with your electrician before specifying it for a designated escape route.\u003c\/p\u003e","brand":"LumiLife","offers":[{"title":"Default Title","offer_id":53389133578507,"sku":"S33466","price":44.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/S33466_00.jpg?v=1790330290","url":"https:\/\/niori.co.uk\/products\/cct-adjustable-microwave-sensor-emergency-led-bulkhead-white","provider":"Niori","version":"1.0","type":"link"}