{"product_id":"aperta-single-door-proximity-keypad-kit-ip65-silver-with-mushroom-exit-button-magnetic-lock","title":"Aperta Single Door Proximity Keypad Kit - IP65 Silver with Mushroom Exit Button \u0026 Magnetic Lock","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Aperta EZT3KXT is a complete single-door access control system built around an IP65-rated proximity keypad with integrated card reader, supplied with a 300kg holding force magnetic lock, boxed power supply, IP55 mushroom exit button, and IP67 green emergency call point. The system arrives ready to install on outdoor doors requiring keypad and proximity tag entry with emergency exit control.\u003c\/p\u003e\n\u003cp\u003eDesigned for external installations on residential gates, commercial entrance doors, service doors and secure access points where weather protection is required, the IP65 keypad withstands rain, dust and UK outdoor conditions. The included 300kg magnetic lock provides holding force sufficient for standard single doors up to 100kg, while the Z and L brackets allow fitting to both inward and outward-opening doors. The mushroom exit button mounts inside the secure zone and allows authorised exit without requiring a code or tag.\u003c\/p\u003e\n\u003cp\u003eThe keypad accepts user-programmed PIN codes and reads the ten included proximity tags at distances up to 50mm, allowing entry by presenting the tag to the reader panel without physical contact. The IP68 power supply unit sits indoors and provides regulated 12V DC output to the lock and control circuit. The green emergency call point integrates fire exit and emergency override functionality, breaking the magnetic lock circuit when pressed to allow immediate exit during emergencies.\u003c\/p\u003e\n\u003cp\u003eAll components in the kit are manufactured by ESP under the Aperta brand and carry matching silver finishes on the external hardware. The system requires mains power to the indoor power supply and low-voltage wiring between the PSU, keypad, lock and exit controls. Installation involves mounting the keypad at the external door frame, fitting the magnetic lock to the door and frame using the supplied brackets, and wiring the circuit according to the included manual.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Net Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e4.373\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Gross Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e4.626\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Length (mm)\u003c\/td\u003e\n\u003ctd\u003e317\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Width (mm)\u003c\/td\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Height (mm)\u003c\/td\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_EZT3KXT_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_EZTAG3.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included in the kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit contains an EZTAG3 IP65 proximity keypad with card reader, ten proximity tags, a 300kg magnetic lock with Z and L mounting brackets, a boxed power supply unit rated IP68, an IP55 mushroom exit button, and an IP67 green emergency call point. All wiring and fixings are included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat door weight can the magnetic lock hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe included A1ML300XT magnetic lock provides 300kg holding force, which is sufficient for standard single doors up to approximately 100kg in weight. The lock works on both inward and outward-opening doors when fitted with the appropriate bracket from the supplied Z and L options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the keypad be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The EZTAG3 keypad carries an IP65 rating, meaning it is protected against rain, dust and outdoor UK weather conditions. The power supply unit is rated IP68 and should be mounted indoors or in a protected outdoor enclosure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow are proximity tags read?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe keypad has an integrated RFID reader that detects the ten supplied proximity tags at distances up to 50mm. Users present the tag to the reader panel without needing to make physical contact, and the system unlocks the door when a valid tag is detected.\u003c\/p\u003e","brand":"ESP","offers":[{"title":"Default Title","offer_id":45294226112779,"sku":"EZT3KXT","price":367.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/EZT3KXT_0c8cba62-020d-4533-b602-b556efc2ae83.jpg?v=1714669727","url":"https:\/\/niori.co.uk\/products\/aperta-single-door-proximity-keypad-kit-ip65-silver-with-mushroom-exit-button-magnetic-lock","provider":"Niori","version":"1.0","type":"link"}