{"product_id":"aluminium-led-profile-1m-plaster-in-recessed-matt-silver","title":"Aluminium LED Profile 1m Plaster-In Recessed - Matt Silver","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 1m recessed LED profile is a plaster-in aluminium channel designed to sit flush within plasterboard walls and ceilings, creating a continuous linear light detail without visible fittings. The profile measures 1000mm long by 55mm wide, with a 12mm recessed depth that accepts LED strip up to 12mm wide. An opal diffuser clips into the channel opening to diffuse the LED output into a seamless line of light.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial interiors where architectural lighting details are required without surface-mounted fittings, the profile sits within the plasterboard substrate so that only the 3mm-projection diffuser shows on the finished wall or ceiling surface. This makes it suitable for feature walls, coving details, stairwell lighting, kitchen plinths and bathroom mirror surrounds where the light source itself should remain hidden. The channel is cut into the plasterboard during first fix, the LED strip is installed within the channel, and the diffuser clips in before final plastering.\u003c\/p\u003e\n\u003cp\u003eThe aluminium construction provides rigidity for straight installation runs and acts as a heat sink for the LED strip, helping to maintain LED performance and lifespan. The matt silver finish on the aluminium reflects light within the channel before it passes through the opal diffuser, improving output efficiency. Each 1m length includes one opal diffuser and two end caps. Additional mounting clips and end caps are available separately (SKU 1MPLACAP) for runs longer than 1m or for corner transitions.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e55 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4610327_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED strip does the profile accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe channel accepts LED strip up to 12mm wide. Most standard flexible LED strip tape measures 8-10mm, so this profile accommodates the majority of residential and commercial LED strip products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the installation process?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe aluminium channel is cut into the plasterboard during first fix, creating a recessed slot 18mm deep. The LED strip is then fixed inside the channel using adhesive backing or mounting clips. The opal diffuser clips into the channel opening, and final plastering is applied to bring the wall or ceiling surface flush with the diffuser edge, leaving only a 3mm diffuser projection visible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple profiles be joined for longer runs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each profile is 1m long and can be butted end-to-end for continuous runs. Additional mounting clips and end caps (SKU 1MPLACAP) are sold separately for multi-metre installations and for corner or transition details.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe profile carries an IP20 rating, which means it is not water-resistant and should only be used in dry indoor locations. For bathroom zones requiring IP44 or IP65 protection, use a different profile designed for wet areas.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293621182731,"sku":"1MPLA","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/799166_3c1d462f-d80e-468e-8dc0-613700337a9c.jpg?v=1714661280","url":"https:\/\/niori.co.uk\/products\/aluminium-led-profile-1m-plaster-in-recessed-matt-silver","provider":"Niori","version":"1.0","type":"link"}