{"product_id":"agni-downlight-68mm-cut-out-80mm-dia-satin-nickel","title":"Agni GU10 Downlight 68mm Cut-Out 80mm Dia - Satin Nickel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\u003cp\u003eSatin nickel with a soft, low-shine sheen, this is a small recessed fitting with a fixed bezel, so the light goes straight down and stays where it is put. It takes a single GU10 lamp of up to 50W, which means you choose the brightness, colour temperature and beam spread yourself. The cut-out is 68mm, the common size for domestic ceilings, and the trim ring is narrow, so very little of the fitting reads from below.\u003c\/p\u003e\u003cp\u003eWe reach for fixed downlights like this one when a room needs even, quiet general light: kitchens, hallways, landings, a living room ceiling set out in a grid. Because the beam does not tilt, plan them as an overall wash rather than for aiming at pictures or the front edge of a worktop, where an adjustable head serves better. It is a fire rated fitting, and it belongs in dry rooms, so kitchens and circulation spaces rather than a shower area; there is a sealed version in the same finish within the range for that job. We would put a dimmable LED reflector lamp in here and run it from a trailing edge dimmer, since the fitting dims only as far as the lamp allows.\u003c\/p\u003e\u003cp\u003eThe bezel carries a satin nickel finish that reads grey rather than yellow, and it sits happily beside brushed steel appliances and nickel switch plates. Wipe the trim with a barely damp cloth once the lamp has gone cold, and keep metal polishes and cream cleaners well away from the finish. It carries a three year warranty. The same downlight is offered in white and polished chrome at this cut-out, and adjustable versions are made in the same finishes if you would rather angle the light. Lamps are not included.\u003c\/p\u003e\u003ch5\u003eSpecification\u003c\/h5\u003e\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\n\n\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eSatin Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCeiling Mountable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.25KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e90mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut Out\u003c\/td\u003e\n\u003ctd\u003e68mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials Used\u003c\/td\u003e\n\u003ctd\u003eMetal, Intumescent Coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Class\u003c\/td\u003e\n\u003ctd\u003eA++ to A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Energy Class\u003c\/td\u003e\n\u003ctd\u003eA++\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Energy Class\u003c\/td\u003e\n\u003ctd\u003eA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp\u003c\/td\u003e\n\u003ctd\u003e1 x GU10 50W max (lamps not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Cap\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Lamp\u003c\/td\u003e\n\u003ctd\u003eLED (50mm Reflector)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Distribution\u003c\/td\u003e\n\u003ctd\u003eDown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Class\u003c\/td\u003e\n\u003ctd\u003eClass 1 - Earth Connection Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Power Consumption\u003c\/td\u003e\n\u003ctd\u003eDependent On Lamps Used (±5%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e220-240V~50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes - Dimmable Lamps Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3yrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUKCA\/CE\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003ePieces Included\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eRequires Installation By Qualified Electrician\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Care\u003c\/td\u003e\n\u003ctd\u003e(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole does it need?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is made for a 68mm cut-out. The outer diameter is 80mm, so the trim covers the opening with a slim margin around it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich lamp should I buy?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA GU10 LED reflector lamp, 50mm diameter, rated at no more than 50W. Choose the beam angle to suit the room: narrower for a defined pool of light, wider for general cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be dimmed?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes, provided the lamp you fit is a dimmable one and it is paired with a suitable dimmer. The fitting itself puts no limit on this beyond the lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the head tilt?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo, this version is fixed and throws the light straight down. If you want to angle the beam, the adjustable Agni downlight takes a 75mm cut-out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it suitable for a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is rated for dry indoor rooms only. For bathrooms and shower zones, choose the sealed Agni downlight, also available in satin nickel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty does it have?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries a three year warranty from the manufacturer.\u003c\/p\u003e","brand":"Deco","offers":[{"title":"Default Title","offer_id":53318795002123,"sku":"D0438","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/D0438_0.jpg?v=1787564390","url":"https:\/\/niori.co.uk\/products\/agni-downlight-68mm-cut-out-80mm-dia-satin-nickel","provider":"Niori","version":"1.0","type":"link"}