{"product_id":"adastra-rs360-100v-line-class-d-slave-amplifier","title":"Adastra RS360 100V Line Class-D Slave Amplifier","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Adastra RS360 is a 100V line slave amplifier built for medium to large installations. It takes standard line level audio from a mixer or from an RM series mixer amplifier, so you can add power to a system without changing your source equipment. As a Class-D design, it stays efficient and lightweight while delivering its rated output, and it fits a standard 19\" rack for tidy, permanent installs.\u003c\/p\u003e\n\u003cp\u003eConnections are flexible. Line level inputs arrive on RCA sockets (phono to some) or on removable screw terminals, also called Euroblock, so you can plug in quickly or hard-wire for a fixed system. A separate 100V input on a screw terminal lets the RS360 extend an existing 100V installation by connecting straight to the speaker feed, including long-distance runs over standard double-insulated cable. Slave outputs can be cascaded onto further RS slaves, so you build larger systems one unit at a time. A 24V mute contact connects to a security or alarm panel to silence the output during an alert.\u003c\/p\u003e\n\u003cp\u003eSpeaker outputs run at 100V line or low impedance, stable down to 2 Ohms, which means you can connect multiple low impedance speakers if you prefer that approach. Master volume gives you level control on the front, and total harmonic distortion stays below 1.0%. Frequency response is 90Hz to 20kHz on 100V and 17Hz to 90kHz at 2 Ohms. The amplifier runs from a 175-264Vac 50Hz IEC supply. It is a straightforward way to power a new install from a mixer output or to expand an existing 100V setup.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuse rating\u003c\/td\u003e\n\u003ctd\u003eT5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power : rms\u003c\/td\u003e\n\u003ctd\u003e360W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e433mm x 355mm x 89mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e9.90KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e175-264Vac 50Hz (IEC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput signal\u003c\/td\u003e\n\u003ctd\u003eSlave line in (RCA\/screw terminal), 100V in (screw terminal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput : signal\u003c\/td\u003e\n\u003ctd\u003eSlave line out (RCA\/screw terminal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs : speaker\u003c\/td\u003e\n\u003ctd\u003e100V or 2 Ohm min. (screw terminals)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControls\u003c\/td\u003e\n\u003ctd\u003eMaster volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMute\u003c\/td\u003e\n\u003ctd\u003e24V alarm contacts (screw terminal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;1.0%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e90Hz-20kHz (100V), 17Hz-90kHz (2Ω)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/953203UK.pdf?v=1785059191\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power output does the RS360 provide?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe RS360 is the 360W model in the RS slave amplifier range. It sits in a 2U 19\" rack housing alongside the 480W version, with 120W and 240W models available in 1U.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it with existing 100V speakers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 100V input on a screw terminal lets you connect directly to an existing 100V speaker feed, including long-distance runs using standard double-insulated cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat inputs are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLine level audio comes in on RCA sockets or removable screw terminals (Euroblock). A separate screw terminal handles the 100V signal input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support low impedance speakers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpeaker outputs are switchable between 100V line and low impedance. Low impedance is stable down to 2 Ohms, so you can connect multiple speakers if preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does alarm muting work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 24V terminal connects to a security or alert panel. When triggered, it mutes the amplifier output so alarm announcements come through clearly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I combine several units?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Slave outputs cascade onto further RS slaves, letting you build larger systems by adding units as your requirements grow.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272133927179,"sku":"953.203UK","price":419.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/953203UK_0.jpg?v=1785059210","url":"https:\/\/niori.co.uk\/products\/adastra-rs360-100v-line-class-d-slave-amplifier","provider":"Niori","version":"1.0","type":"link"}