{"product_id":"adastra-lr2-induction-loop-receiver-with-belt-clip","title":"Adastra LR2 Induction Loop Receiver with Belt Clip","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Adastra LR2 is a compact, battery powered receiver for use with induction loop systems, also known as hearing loop systems. It clips onto a belt and picks up the audio signal broadcast by a loop, feeding it to a pair of headphones. We supply it with in-ear headphones so it is ready to use straight away, and its small size means it sits neatly out of the way while you move around a space.\u003c\/p\u003e\n\u003cp\u003eThe receiver has a 3.5mm headphone jack socket, so you can connect the supplied earphones or your own set. A volume control lets you set a comfortable listening level, and a lo-cut switch helps clean up the sound by reducing low frequency hum or interference. The headphone output is rated for 32 Ohms nominal impedance, which suits most standard in-ear and on-ear headphones. Power comes from a single 9V PP3 battery, which is not included, so keep a spare to hand.\u003c\/p\u003e\n\u003cp\u003eOne common use is testing and setting up induction loop installations, letting an engineer walk the room and check signal strength and coverage. The LR2 also works well as a quiet audio tour guide alongside an existing loop, which suits art galleries, museums and similar venues where you want visitors to hear a commentary without loudspeakers filling the room. The unit measures 60 x 117 x 32mm and weighs 80g without a battery, so it is easy to carry or hand out for the length of a visit.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e9Vdc (PP3 battery - not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControls\u003c\/td\u003e\n\u003ctd\u003eVolume, lo-cut switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003e3.5mm headphone jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeadphone impedance\u003c\/td\u003e\n\u003ctd\u003e32 Ohm nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e60mm x 117mm x 32mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.08KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/952855UK_437fe0b9-a4d6-4e47-9572-719986941027.pdf?v=1785056422\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs a battery included with the LR2?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The receiver runs on a single 9V PP3 battery, which you will need to supply separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre headphones supplied?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The LR2 comes with in-ear headphones, and you can also connect your own set through the 3.5mm jack socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the lo-cut switch for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt reduces low frequency sound, which can help cut hum or interference and make speech clearer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it to test a loop installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It is a handy tool for checking signal strength and coverage while setting up an induction loop system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat headphones will work with it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe output is rated at 32 Ohms nominal, so most standard in-ear and on-ear headphones are suitable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the receiver carried?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a belt clip and weighs just 80g without a battery, so it can be worn or handed out easily.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272123146507,"sku":"952.855UK","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/952855UK_0.jpg?v=1785056439","url":"https:\/\/niori.co.uk\/products\/adastra-lr2-induction-loop-receiver-with-belt-clip","provider":"Niori","version":"1.0","type":"link"}