{"product_id":"60w-24v-constant-voltage-led-driver-ip67-weatherproof","title":"60W 24V Constant Voltage LED Driver - IP67 Weatherproof","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 24DCIP60P is a 60W constant voltage LED driver that converts 230V 50Hz mains to 24V DC output, designed to power 24V LED strip modules, tape lighting and other low-voltage LED installations. The driver delivers stable voltage output regardless of load fluctuation, maintaining consistent brightness across the connected LED run.\u003c\/p\u003e\n\u003cp\u003eHoused in a white polycarbonate enclosure rated to IP67, the driver is fully sealed against dust ingress and protected against temporary immersion, making it suitable for outdoor installations including garden lighting, decking underlighting, fascia lighting, and bathroom zones where moisture exposure is likely. The 155mm x 45mm x 32mm compact format allows the driver to be mounted in ceiling voids, behind fascia panels, or in external junction boxes without requiring excessive space.\u003c\/p\u003e\n\u003cp\u003ePre-wired with 0.3m mains input and low-voltage output cables, the driver simplifies installation by removing the need to wire into screw terminals. Built-in thermal shutdown and overload protection prevent damage from short circuits or excessive load, automatically resetting once the fault condition is cleared. The Class II construction provides double insulation without requiring an earth connection to the metal enclosure, improving safety in environments where earth bonding is difficult.\u003c\/p\u003e\n\u003cp\u003eThe driver is rated for continuous operation at full 60W load and carries a 3-year manufacturer warranty. It pairs with Knightsbridge's range of 24V LED strip products and is compatible with third-party 24V LED modules that fall within the 60W maximum output rating.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e155mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e32mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e45mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e0.3m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-24DCIP60P.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat voltage does this driver output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver outputs 24V DC at a maximum of 60W. It is designed for use with 24V LED strip lighting, tape modules and other 24V LED installations that fall within the 60W power budget.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP67 rating means the driver is fully dust-tight and protected against temporary immersion in water up to 1m depth for 30 minutes. It can be installed in outdoor locations, bathrooms and other wet environments, provided it is mounted in a position where water cannot pool around it continuously.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the driver wired?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver comes pre-wired with 0.3m input cable for connection to 230V mains and 0.3m output cable for connection to the LED load. The mains input must be connected via a fused spur or plug, and the low-voltage output connects directly to the LED strip or module terminals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require dimming capability?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a non-dimmable constant voltage driver. For dimmable installations, a separate mains dimmer or a dimmable driver model is required. Check the Knightsbridge range at Niori for dimmable alternatives if needed.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391703154955,"sku":"24DCIP60P","price":25.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/2054922_4fe9f5bb-d593-40a7-9e30-add58ee7369c.jpg?v=1747063588","url":"https:\/\/niori.co.uk\/products\/60w-24v-constant-voltage-led-driver-ip67-weatherproof","provider":"Niori","version":"1.0","type":"link"}