{"product_id":"50w-24v-constant-voltage-dimmable-led-driver-knightsbridge","title":"50W 24V Constant Voltage Dimmable LED Driver - Knightsbridge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 24DC50D is a 50W constant voltage LED driver that converts 230V mains to 24V DC output, designed for powering LED strip lighting, under-cabinet LED installations and low-voltage LED downlight systems. The driver delivers a stable 24V output up to a maximum load of 50W and is dimmable when paired with most trailing-edge dimmers.\u003c\/p\u003e\n\u003cp\u003eRated IP20 for internal use only, the driver suits installation in ceiling voids, under-cabinet cavities, behind lighting panels and other dry indoor locations where the unit will not be exposed to moisture. The compact 184mm × 61mm × 32mm ABS enclosure includes integral protections against open circuit, short circuit, overload and over-temperature conditions, shutting down automatically if any fault is detected and resuming output once the fault clears.\u003c\/p\u003e\n\u003cp\u003eThe Class II double-insulated construction provides SELV (Safety Extra Low Voltage) output, eliminating the need for an earth connection on the low-voltage side and simplifying installation in certain retrofit situations. The white ABS casing includes blue end caps with cable entry points and screw terminals for input and output connections. Dimmer compatibility should be verified before installation as performance varies between dimmer models and total connected load.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e184 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e61 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eTrailing-edge only*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2463222_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_837470.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this driver dimmable with all dimmer types?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The 24DC50D is compatible with trailing-edge dimmers only. Leading-edge dimmers will not work reliably with this driver. Check dimmer compatibility with your specific dimmer model before installation, as performance can vary depending on total connected LED load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum LED strip length this driver can power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThat depends on the power consumption per metre of your LED strip. For example, a 10W\/m strip can run up to 5 metres on this 50W driver. A 20W\/m strip would be limited to 2.5 metres. Check the strip specification and do not exceed the 50W total output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be installed in a bathroom or outdoor location?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the driver is suitable for dry internal locations only. It must be installed in a ceiling void, under-cabinet space or similar dry area where it will not be exposed to moisture, condensation or direct water contact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does constant voltage mean compared to constant current?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConstant voltage drivers maintain a fixed output voltage (24V in this case) regardless of the connected load, making them suitable for LED strip and parallel LED circuits. Constant current drivers maintain a fixed current instead and are typically used for individual LED downlights or series-connected LEDs.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293733675275,"sku":"24DC50D","price":29.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/157960_6f4f1380-199a-4d84-b12d-99bf291138f2.jpg?v=1714663469","url":"https:\/\/niori.co.uk\/products\/50w-24v-constant-voltage-dimmable-led-driver-knightsbridge","provider":"Niori","version":"1.0","type":"link"}