{"product_id":"45a-1-gang-dp-cooker-switch-with-neon-led-polished-chrome","title":"45A 1 Gang DP Cooker Switch With Neon LED - Polished Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge 45A 1-gang double-pole switch provides isolation for cookers and high-load cooking appliances, with a red neon LED indicator that shows when the circuit is live. The polished chrome faceplate is cut from 304 stainless steel and finished to a mirror shine, with rounded edges that sit flush against the wall.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchens, utility rooms and commercial catering spaces, the switch handles loads up to 45A (10,350W) at 230V 50Hz, making it suitable for electric cookers, ranges, and multiple smaller cooking appliances wired to the same circuit where the combined load stays within the 45A rating. The double-pole switching isolates both live and neutral lines when turned off, providing safer isolation during appliance maintenance or cleaning.\u003c\/p\u003e\n\u003cp\u003eThe built-in gasket around the rear of the faceplate creates a seal against uneven plaster or painted surfaces, preventing gaps forming between the plate and wall over time. The 304 stainless steel construction resists corrosion in high-humidity kitchen environments better than brass or zinc-alloy alternatives. The neon LED sits behind a red aperture at the top of the switch rocker, visible in daylight and low-light conditions to confirm at a glance whether the cooker circuit is energised.\u003c\/p\u003e\n\u003cp\u003eThe switch requires a minimum 47mm back box depth for installation. The IP20 rating makes it suitable for dry indoor locations but not for direct splash zones or outdoor use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e85.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e85.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e29.82mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e12.7°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e304 Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-CL81MNPC.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat appliances can this switch control?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 45A rating suits electric cookers, ranges, and combined cooking appliances where the total load does not exceed 45A (10,350W) at 230V. It is commonly used as the primary isolation switch for a dedicated cooker circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the neon LED indicate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe red neon LED lights when the circuit is live and the switch is in the 'on' position. It does not indicate whether an appliance is drawing current, only whether the circuit is energised.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 47mm back box depth is needed for safe installation. The faceplate projects approximately 12.7mm from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the switch screwless?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The polished chrome faceplate uses visible fixing screws at top and bottom. Knightsbridge does offer screwless variants in other ranges if a screwless finish is required.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":52475341832459,"sku":"CL81MNPC","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1106652_f21f6e7d-c079-4349-a18e-6cb8200a7b60.jpg?v=1760643087","url":"https:\/\/niori.co.uk\/products\/45a-1-gang-dp-cooker-switch-with-neon-led-polished-chrome","provider":"Niori","version":"1.0","type":"link"}