{"product_id":"40m-cat5-ethernet-cable-for-ip-cameras-pre-terminated-rj45","title":"40m CAT5 Ethernet Cable for IP Cameras - Pre-Terminated RJ45","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis 40m CAT5 ethernet cable is designed for IP camera installations, with pre-terminated RJ45 connectors at both ends and a polyethylene jacket rated for external use. The cable carries both power and data over four twisted pairs, supporting PoE (Power over Ethernet) configurations where the camera draws power from the network switch or injector at the other end of the run.\u003c\/p\u003e\n\u003cp\u003eIntended for CCTV installations in commercial, residential and industrial sites, the 40m length bridges cameras mounted on building exteriors, at gate entrances, or across car parks back to a recorder or network switch inside. The polyethylene jacket provides UV resistance and weatherproofing for above-ground outdoor runs, though the cable is not rated for direct burial without conduit. The pre-terminated RJ45 connectors eliminate the need for on-site crimping, reducing installation time and the risk of poor termination causing dropouts.\u003c\/p\u003e\n\u003cp\u003eThe four twisted pairs follow standard CAT5 wiring, supporting 10\/100 Mbps ethernet data rates typical of IP cameras up to 5MP resolution. The cable weighs 1.35kg for the 40m length, making it manageable for single-person installation when fed through cable trays, along walls or through conduit. The black polyethylene sheath minimises visual impact on building exteriors and resists degradation from prolonged exposure to UK weather conditions.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Net Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e1.35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Gross Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e1.39\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Gross Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e22.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Length (mm)\u003c\/td\u003e\n\u003ctd\u003e210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Width (mm)\u003c\/td\u003e\n\u003ctd\u003e210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Height (mm)\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Length (mm)\u003c\/td\u003e\n\u003ctd\u003e480\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Width (mm)\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Height (mm)\u003c\/td\u003e\n\u003ctd\u003e360\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_CABIP40_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable carry power and data simultaneously?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The four twisted pairs support PoE (Power over Ethernet), allowing the cable to carry both network data and power to IP cameras that accept PoE input. This eliminates the need for a separate power cable at the camera end, provided the camera and network switch or injector both support PoE standards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for outdoor installations?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe polyethylene jacket provides UV resistance and weatherproofing for above-ground outdoor cable runs along walls, through cable trays or in conduit. The cable is not rated for direct burial in soil without protective conduit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat data rate does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCAT5 cabling supports 10\/100 Mbps ethernet, which is sufficient for IP cameras up to 5MP resolution at standard frame rates. Higher-resolution cameras or multi-camera aggregated runs may require CAT5e or CAT6 cabling for reliable throughput.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the RJ45 connectors already fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Both ends are pre-terminated with RJ45 connectors, eliminating the need for on-site crimping tools or termination. This reduces installation time and the risk of wiring faults from poor termination.\u003c\/p\u003e","brand":"ESP","offers":[{"title":"Default Title","offer_id":45294116471051,"sku":"CABIP40","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/CABIP40_b55fa93b-3e99-43d8-bfa1-9ab175f589b1.jpg?v=1714668280","url":"https:\/\/niori.co.uk\/products\/40m-cat5-ethernet-cable-for-ip-cameras-pre-terminated-rj45","provider":"Niori","version":"1.0","type":"link"}