{"product_id":"4-channel-led-amplifier-white","title":"4 Channel LED Amplifier - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\u003cp\u003eThis 4 Channel LED Amplifier is a small white control module for LED strip lighting. An LED amplifier takes the signal from a controller and passes it on with fresh power, so a longer run of strip, or a second run, can follow the same commands as the first. With four channels, it carries up to four separate colour channels of a strip together. It measures 11.9cm long, 4.7cm wide and 2.3cm high, and weighs just 0.08KG. It is rated IP20, which settles where it goes: indoors and dry, kept well away from damp. It has no lamp socket and gives no light of its own; it works alongside your strip and controller as part of the system.\u003c\/p\u003e\u003cp\u003eIt suits anyone running LED strip a long way, such as under kitchen cabinets, along a hallway cove or around living room shelving, where a single controller struggles to keep the far end as bright and true in colour as the near end. Adding one partway along the run keeps the whole length even, and every section changes together when you choose a new colour or scene. Because it is so compact, it tucks easily inside a cupboard, behind a pelmet or in a dry ceiling void, so it stays out of sight once the lighting is finished.\u003c\/p\u003e\u003cp\u003eThe white case has green screw connector blocks at both ends, with the four channels clearly marked, and a slotted fixing tab at each end so it sits flat and firm. Being white, it blends into a pale cupboard interior or ceiling. Care is simple: keep it dry and dust it now and then with a soft, dry cloth. Our practical note: check that its ratings match your LED strip and controller before you order, so all three work together from the first switch-on.\u003c\/p\u003e\u003ch5\u003eSpecification\u003c\/h5\u003e\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Source\u003c\/td\u003e\n\u003ctd\u003ewithout lamp socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e11.9cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e4.7cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e2.3cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.08KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Class\u003c\/td\u003e\n\u003ctd\u003eClass III\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\u003cp\u003e\u003cstrong\u003eWhat does a 4 channel LED amplifier do?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt takes the signal from your LED controller and passes it on with fresh power, so a longer or second run of strip follows the same colours and scenes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the amplifier go in a bathroom or outdoors?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo. It is rated IP20, so it belongs indoors in a dry place, such as a cupboard, behind a pelmet or in a dry ceiling void.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is the amplifier?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is 11.9cm long, 4.7cm wide and 2.3cm high, and weighs 0.08KG, so it hides easily inside a cupboard or behind a pelmet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it give any light itself?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo. It has no lamp socket and gives no light of its own; it works between your controller and your LED strip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat colour is the case?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe case is white, with green screw connector blocks at each end, so it blends quietly into a pale cupboard interior or ceiling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat care does the amplifier need?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVery little: keep it dry and dust it now and then with a soft, dry cloth to keep the case clean.\u003c\/p\u003e","brand":"MiBoxer","offers":[{"title":"Default Title","offer_id":53469236789515,"sku":"69056","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/4-channel-led-amplifier-white.jpg?v=1792584318","url":"https:\/\/niori.co.uk\/products\/4-channel-led-amplifier-white","provider":"Niori","version":"1.0","type":"link"}