{"product_id":"3-gang-2-way-10-200w-intelligent-dimmer-brushed-brass","title":"3 Gang 2-Way 10-200W Intelligent Dimmer - Brushed Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 3-gang 2-way intelligent dimmer handles three separate lighting circuits from a single brushed brass faceplate, with each gang rated at 10-200W for incandescent or halogen loads and 5-150W for dimmable LED. The dimmer switches between trailing-edge and leading-edge modes from the front control knob, allowing compatibility with a wide range of lamp types without needing to remove the faceplate or rewire.\u003c\/p\u003e\n\u003cp\u003eDesigned for multi-zone lighting control in living rooms, dining rooms and bedrooms, the 2-way configuration allows the same lights to be controlled from two locations (e.g. either end of a hallway or at two entrances to a room). Each gang operates independently with a push on\/off action and rotary dimming via a matching brushed brass knob. The dimmer ships preset in trailing-edge mode, which suits most modern dimmable LED bulbs, and can be switched to leading-edge mode for older lamp technologies or specific fittings that require it.\u003c\/p\u003e\n\u003cp\u003eThe flat plate design sits just 2.5mm proud of the wall surface once fitted to a 25mm minimum back box, giving a low-profile finish that suits contemporary interiors. The premium-grade steel construction provides weight and rigidity, and the brushed brass finish softens reflections compared to polished brass while maintaining the warm metallic tone. Built-in overload and overheat protection automatically cuts power if the dimmer exceeds safe operating limits, and an inrush current limiter prevents surge damage when lamps are first switched on.\u003c\/p\u003e\n\u003cp\u003eThe front-panel trim control allows minimum and maximum brightness levels to be adjusted after installation, making it straightforward to fine-tune dimming range if fittings or bulbs are changed. The dimmer is rated IP20 and requires earthing, so it must be fitted by a qualified electrician in accordance with BS 7671 wiring regulations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6080098_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between trailing-edge and leading-edge mode?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTrailing-edge mode is designed for dimmable LED and low-voltage electronic transformers, and is the preset mode on this dimmer. Leading-edge mode suits older incandescent, halogen and magnetic transformer loads. Most modern LED bulbs work best in trailing-edge mode, but the dimmer can be switched between modes from the front control knob if compatibility issues arise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mix different bulb types on the same gang?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Each gang must control lamps of the same type, brand and wattage. Mixing different bulb brands, wattages or technologies (e.g. LED and halogen together) on a single gang causes erratic dimming, flicker and can damage the dimmer or the lamps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 2-way dimmer can be wired to control the same lights from two different switch locations, such as either end of a hallway or two entrances to a room. It requires appropriate 2-way wiring between the two switch positions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I adjust the minimum and maximum brightness?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe control knob on each gang can be used to trim the dimming range. Turn the knob fully anti-clockwise to set the minimum brightness level, or fully clockwise to set the maximum. Full instructions are in the specification sheet linked above.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293718831371,"sku":"FP2193BB","price":50.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1533622_d348ecca-bf2c-4749-9036-93af1298e425.jpg?v=1714663164","url":"https:\/\/niori.co.uk\/products\/3-gang-2-way-10-200w-intelligent-dimmer-brushed-brass","provider":"Niori","version":"1.0","type":"link"}