{"product_id":"24v-rgb-led-strip-light-5m-ip20-internal-use","title":"24V RGB LED Strip Light - 5m (IP20 Internal Use)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge 24V RGB LED strip light delivers colour-changing lighting across a 5m reel, with 36 x 5050 SMD LEDs per metre providing 9W per metre output. The 10mm-wide flexible strip comes with 3M self-adhesive backing tape, allowing it to be fitted along cabinet undersides, cove lighting runs, shelving edges and alcove recesses. RGB capability cycles through red, green, blue and mixed colours via a separate controller and remote (sold separately).\u003c\/p\u003e\n\u003cp\u003eDesigned for internal feature lighting, the IP20 rating limits the strip to dry indoor environments away from moisture. The 24V DC operation requires a constant voltage driver (sold separately) matched to the total wattage of the run — a 5m reel draws 45W. The strip can be cut to length every 166mm at marked intervals, allowing precise fitting to the available space. The maximum continuous run is 10m before electrical resistance begins to affect colour consistency and brightness at the far end.\u003c\/p\u003e\n\u003cp\u003eThe 5050 SMD LEDs sit on a flexible PCB substrate that bends around corners with a minimum radius of approximately 50mm, making it suitable for curved cabinet edges and arched alcoves. The 1.8mm profile sits flat against surfaces once the self-adhesive tape is applied. Knightsbridge produces a full range of compatible drivers, RGB controllers, connectors and aluminium profiles (all sold separately) to build a complete installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e5000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e1.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eDriver dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eRGB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5921823_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat driver and controller are needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis 5m reel draws 45W total (9W per metre), so a 24V constant voltage driver rated at 50W or higher is required. An RGB controller and remote are also needed to change colours and control dimming — neither are included with the strip. Knightsbridge sells compatible drivers and controllers separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms or kitchens?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating limits this strip to dry indoor environments. It cannot be used in bathroom zones where moisture is present, or directly above kitchen hobs or sinks. For wet or damp locations, choose an IP67-rated LED strip instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the strip be cut to a shorter length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip can be cut every 166mm at marked intervals along its length. Cutting at other points will damage the circuit. Each cut section requires a new connection point to the driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum continuous run length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe maximum run is 10m before voltage drop affects colour consistency and brightness at the far end. If more than 10m is needed, run a second parallel circuit from the driver rather than extending a single strip beyond 10m.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293707886859,"sku":"LFC24RGB5M","price":49.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/pixelcut-export_6973c373-5469-4364-96fa-fbe1c4b75174.jpg?v=1715605548","url":"https:\/\/niori.co.uk\/products\/24v-rgb-led-strip-light-5m-ip20-internal-use","provider":"Niori","version":"1.0","type":"link"}