{"product_id":"24v-dc-40w-led-driver-power-supply-ip67-121mm","title":"24V DC 40W LED Driver Power Supply IP67 121mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is a constant-voltage LED driver that takes a 220 to 240V AC mains input and steps it down to a stable 24V DC output rated at 40W. The article code TRETO IP67 24V 40W confirms the enclosed, weatherproof build: an IP67 housing in white plastic, measuring 121 × 37 × 26 mm. It is designed to power 24V LED loads such as strip, tape and modules; the strip must match the 24V output, and the 40W rating sets the maximum total length or number of fittings it can carry on one run.\u003c\/p\u003e\n\u003cp\u003eThe IP67 rating means it suits damp and sheltered outdoor positions as well as dry indoor sites, so it works for garden, cove and under-cabinet installations alike. The compact 121mm body tucks into a profile end, a recess or a project box close to the load. We also stock the 24V LED strips and LED modules this driver is built to power, along with the profiles and connectors to complete the run.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003e24V DC 40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\u003ctd\u003e220-240 AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e121 × 37 × 26 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does this driver power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt powers 24V DC LED loads such as strip, tape and modules, up to a total of 40W on one run. The connected fittings must be rated for 24V to match the output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP67 rating makes it dust-tight and protected against temporary immersion, so it suits damp and sheltered outdoor locations as well as dry indoor sites.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the input voltage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt runs from a standard 220 to 240V AC mains supply and converts this to a regulated 24V DC output for the LED load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I wire it in?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnect the 220 to 240V AC mains to the input side and run the 24V DC output to the strip or module. Keep the total connected load within the 40W rating and observe correct polarity on the DC side.\u003c\/p\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-39513-spec.pdf?v=1782144724\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-39513-datasheet.pdf?v=1782144723\" target=\"_blank\"\u003eRange Datasheet\u003c\/a\u003e\u003c\/p\u003e\n","brand":"Kanlux","offers":[{"title":"Default Title","offer_id":53200098492683,"sku":"39513","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/39513.jpg?v=1782144984","url":"https:\/\/niori.co.uk\/products\/24v-dc-40w-led-driver-power-supply-ip67-121mm","provider":"Niori","version":"1.0","type":"link"}