{"product_id":"24v-dc-200w-led-driver-power-supply-ip20-205mm","title":"24V DC 200W LED Driver Power Supply IP20 - 205mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is a constant-voltage LED driver decoded from the article code POWELED P 24V 200W, giving a steady 24V DC output rated to 200W. It takes a 220-240V AC mains input and converts it to the low-voltage DC that 24V LED loads need, so it sits between the wall supply and the fitting rather than producing any light itself. The enclosed plastic housing measures 205 x 71 x 35 mm in white, with an IP20 rating for dry indoor installation in a cupboard, ceiling void or back box clear of damp.\u003c\/p\u003e\n\u003cp\u003eWith 200W on tap it suits longer 24V runs and grouped loads. Size the run so the total wattage of the connected LEDs stays comfortably below the 200W rating, leaving some headroom. Match the driver voltage to the load exactly, since a 24V driver is for 24V strip or modules only and must not be wired to a 12V load. We also stock the 24V LED strips and modules this driver is built to power.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003e24V DC 200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\u003ctd\u003e220-240 AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e205 × 71 × 35 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does this driver power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt powers 24V DC LED loads such as flexible strip and LED modules, up to a combined 200W. The strip or module voltage must match the 24V output exactly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat input voltage does it need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt runs from a standard 220-240V AC mains supply and converts that to a regulated 24V DC output. It should be wired in by a competent person on the mains side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This unit is rated IP20, so it is for dry indoor use only and must be kept clear of damp, splashes and outdoor exposure. For wet or exposed locations choose a higher IP-rated driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I size it to my LED run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAdd up the total wattage of all the LEDs you are connecting and keep it below the 200W rating, ideally with around 10 to 20 percent headroom. This avoids overloading and helps the driver run cool.\u003c\/p\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-28966-spec.pdf?v=1782144725\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-28966-datasheet.pdf?v=1782144726\" target=\"_blank\"\u003eRange Datasheet\u003c\/a\u003e\u003c\/p\u003e\n","brand":"Kanlux","offers":[{"title":"Default Title","offer_id":53200099574027,"sku":"28966","price":69.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/28966.jpg?v=1782144988","url":"https:\/\/niori.co.uk\/products\/24v-dc-200w-led-driver-power-supply-ip20-205mm","provider":"Niori","version":"1.0","type":"link"}