{"product_id":"24v-dc-150w-led-driver-power-supply-ip67-193mm","title":"24V DC 150W LED Driver Power Supply IP67 193mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis enclosed LED driver takes a 220-240V AC mains input and delivers a regulated 24V DC output at up to 150W, giving any 24V LED load a stable supply. The decoded TRETO build is rated IP67, so it copes with damp, dust and sheltered outdoor positions where a standard indoor driver would not survive, and the sealed white plastic housing measures 193 × 52 × 37 mm.\u003c\/p\u003e\n\u003cp\u003eMatch the driver to the total wattage of your run, keeping the connected load comfortably below the 150W ceiling, and confirm your strip or module is a 24V type rather than 12V before wiring. It powers 24V LED strips, COB tape and compatible LED modules, feeding them through a profile or directly along a run. We also stock the 24V LED strips, COB tape and LED modules this driver is built to power, along with the profiles to house them.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003e24V DC 150W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\u003ctd\u003e220-240 AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e193 × 52 × 37 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can this driver power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt supplies any 24V DC LED load, such as 24V LED strips, COB tape and compatible LED modules, up to a total of 150W. Always check that the connected wattage stays within the 150W rating and that your strip is a 24V type.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for outdoor or damp use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP67 rating means it is sealed against dust and the effects of temporary immersion, so it suits damp utility areas, gardens and sheltered outdoor runs. For fully exposed positions, mount it in a protected enclosure where practical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat input voltage does it need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt runs from a standard 220-240V AC mains supply and converts that to a regulated 24V DC output. It should be wired in by a competent electrician in line with the wiring regulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with a 12V LED strip?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a 24V DC driver and must be paired with 24V LED loads only. Using it with a 12V strip would over-drive the strip, so check the strip voltage before connecting.\u003c\/p\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-39519-spec.pdf?v=1782144724\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-39519-datasheet.pdf?v=1782144724\" target=\"_blank\"\u003eRange Datasheet\u003c\/a\u003e\u003c\/p\u003e\n","brand":"Kanlux","offers":[{"title":"Default Title","offer_id":53200098722059,"sku":"39519","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/39519.jpg?v=1782144986","url":"https:\/\/niori.co.uk\/products\/24v-dc-150w-led-driver-power-supply-ip67-193mm","provider":"Niori","version":"1.0","type":"link"}