{"product_id":"24v-dc-150w-led-driver-power-supply-205mm-ip20","title":"24V DC 150W LED Driver Power Supply 205mm IP20","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis constant-voltage LED driver, decoded from the POWELED P 24V 150W code, takes a 220-240V AC mains input and outputs a steady 24V DC at up to 150W. It is the power supply that sits between your mains and any low-voltage 24V LED load, converting the supply so the strip or module receives the regulated voltage it needs to run safely. A 24V strip or module cannot connect straight to the mains, so a matching driver like this one is required.\u003c\/p\u003e\n\u003cp\u003eRated at 150W, it suits a single longer run or several shorter 24V sections wired within that limit. The enclosure measures 205 × 71 × 35 mm in white plastic and carries an IP20 rating, so it is intended for dry indoor positions inside a cabinet, void or housing rather than damp or exposed locations. We also stock the 24V LED strips and LED modules this driver is built to power, along with connectors to wire them in.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003e24V DC 150W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\u003ctd\u003e220-240 AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e205 × 71 × 35 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does this driver power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt powers 24V DC LED loads such as flexible strips and LED modules. Confirm your strip or module is rated at 24V, as a 12V load must not be connected to this driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much load can it run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is rated to 150W of output at 24V DC. Add up the wattage of every strip or module section you intend to connect and keep the total within that 150W figure, ideally leaving some headroom.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. With an IP20 rating it is for dry indoor use only and should be kept clear of moisture, damp and direct water. Fit it inside a cabinet, ceiling void or protective housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it wired in?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 220-240V AC mains supply connects to the input terminals and the 24V DC output feeds your LED strip or module. Wiring should be carried out by a competent person in line with current regulations.\u003c\/p\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-28964-spec.pdf?v=1782144725\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-28964-datasheet.pdf?v=1782144725\" target=\"_blank\"\u003eRange Datasheet\u003c\/a\u003e\u003c\/p\u003e\n","brand":"Kanlux","offers":[{"title":"Default Title","offer_id":53200099508491,"sku":"28964","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/28964.jpg?v=1782144988","url":"https:\/\/niori.co.uk\/products\/24v-dc-150w-led-driver-power-supply-205mm-ip20","provider":"Niori","version":"1.0","type":"link"}