{"product_id":"24v-dc-100w-led-driver-power-supply-180mm-ip20","title":"24V DC 100W LED Driver Power Supply 180mm IP20","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eDecoded from the POWELED P code, this is a constant-voltage LED driver giving a regulated 24V DC output rated up to 100W. It takes a 220 to 240V AC mains input and steps it down to the low-voltage DC that 24V LED loads run on, so it sits between the mains supply and the strip, module or profile run it powers. The enclosure measures 180 x 66 x 32mm in a white plastic housing.\u003c\/p\u003e\n\u003cp\u003eRated IP20, it is for dry indoor installation only, such as inside a cabinet, ceiling void or enclosure away from damp. Match the driver to the strip voltage and keep the connected load within the 100W rating, leaving some headroom for a stable run. We also stock the 24V LED strips and modules this driver powers, plus the profiles and end-caps to finish the run.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003e24V DC 100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\u003ctd\u003e220-240 AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e180 × 66 × 32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can this driver power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt powers 24V DC LED loads such as flexible strips, LED modules and profile-mounted tape. Keep the total connected load within its 100W rating and make sure the LED voltage matches its 24V output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this driver suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It is rated IP20, so it is for dry indoor use only. Install it inside a cabinet, ceiling void or enclosure, clear of moisture and direct contact with water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat input voltage does it need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt connects to a standard 220 to 240V AC mains supply and converts that to a regulated 24V DC output for the LED load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it wired in?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is wired between the mains supply and the LED load, with the 220 to 240V AC input on one side and the 24V DC output to the strip or module on the other. Electrical connection should be carried out by a competent person.\u003c\/p\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-28962-spec.pdf?v=1782144725\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-28962-datasheet.pdf?v=1782144725\" target=\"_blank\"\u003eRange Datasheet\u003c\/a\u003e\u003c\/p\u003e\n","brand":"Kanlux","offers":[{"title":"Default Title","offer_id":53200099410187,"sku":"28962","price":43.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/28962.jpg?v=1782144987","url":"https:\/\/niori.co.uk\/products\/24v-dc-100w-led-driver-power-supply-180mm-ip20","provider":"Niori","version":"1.0","type":"link"}