{"product_id":"2-gang-2-way-intelligent-dimmer-10-200w-led-matt-black-rounded-edge","title":"2 Gang 2 Way Intelligent Dimmer 10-200W LED - Matt Black Rounded Edge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge CL2192MBB is a 2-gang 2-way intelligent dimmer switch rated at 10-200W per gang (5-150W LED), housed in a matt black rounded-edge metal faceplate with matching matt black rotary control caps. The dimmer can switch between trailing-edge and leading-edge modes from the front plate using the control knob, making it compatible with a wide range of dimmable LED, halogen and incandescent lamps without needing to replace the module when lamp types change.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and light commercial installation where two separate lighting circuits need dimming control from a single faceplate, the 2-gang configuration allows independent dimming of two different light fittings or zones. The 2-way wiring supports switching from two locations, so the dimmer can be paired with a second switch elsewhere in the room to control the same lights. The rotary action provides push on\/off function and continuous rotation for dimming, with soft-start and soft-stop built in to extend lamp life.\u003c\/p\u003e\n\u003cp\u003eThe dimmer ships pre-set to trailing-edge mode, which suits most modern dimmable LED lamps and electronic transformers. Leading-edge mode supports older resistive and inductive loads including halogen lamps on magnetic transformers. Mode switching, minimum brightness trimming and factory reset are all accessible from the front plate without removing the faceplate or isolating supply. The dimmer includes overload and overheat protection plus an inrush current limiter to handle the higher initial current draw when switching on capacitive LED drivers.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish provides a low-sheen surface that sits comfortably in contemporary, industrial and dark-toned interiors. The rounded edge profile softens the transition between wall and faceplate compared to sharp-edged alternatives. The premium-grade steel construction gives the faceplate rigidity and resistance to surface wear from repeated use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901274_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The dimmer module sits behind the faceplate and requires clearance for the terminals and control electronics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this with LED bulbs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided the LED bulbs are marked as dimmable. The dimmer supports 5-150W LED loads per gang in trailing-edge mode, which suits most modern dimmable LED lamps. Do not mix different LED brands or wattages within the same fitting, as this can cause flickering or incomplete dimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I switch between trailing-edge and leading-edge modes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMode switching is done from the front plate using the rotary control knob. Press and hold the knob while rotating to access the mode selection menu. The full procedure is detailed in the specification sheet linked above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way wiring mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2-way wiring allows the same lighting circuit to be controlled from two separate switch locations. The dimmer is installed at one location and paired with a standard 2-way switch at the second location, enabling on\/off control from both points with dimming only available at the dimmer location.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293696614667,"sku":"CL2192MBB","price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1553988_87150fa6-e3a6-4c32-a3ba-dfb63a6b8452.jpg?v=1714662794","url":"https:\/\/niori.co.uk\/products\/2-gang-2-way-intelligent-dimmer-10-200w-led-matt-black-rounded-edge","provider":"Niori","version":"1.0","type":"link"}