{"product_id":"12w-ip54-cct-adjustable-surface-mounted-downlight-white","title":"12W IP54 CCT Adjustable Surface Mounted Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis surface mounted downlight fixes flat to the ceiling rather than dropping into a cut hole, so there is no plasterboard to saw and no void to find above it. That makes it useful on concrete ceilings, garage soffits and anywhere the joists sit in the wrong place for a recessed fitting. The LED sits behind a curved opal diffuser in a round white body and draws 12W to give 1090 lumens. Colour temperature is adjustable, so one fitting can be set warm or cool without ordering a different version.\u003c\/p\u003e\n\u003cp\u003eThe IP54 rating means protection against dust and against splashing water from any direction, and that is what earns it bathroom zones 2 and 3: the area beyond the bath or shower, and the rest of the room. It suits a utility room, a porch or a garage just as well, where an open lampholder would soon fill with dust. The 120 degree beam is wide, so light spreads across the ceiling and washes down evenly instead of pooling in a bright circle underneath. One unit at 1090 lumens will cover a small bathroom or a hallway; a kitchen or a long landing wants several at regular centres.\u003c\/p\u003e\n\u003cp\u003eIt is dimmable, so pair it with a trailing edge LED dimmer and check that dimmer's minimum load, since many need more than one fitting on the circuit before they run smoothly at the bottom of the range. Set the warmer colour temperature for bedrooms and bathrooms and the cooler one where you want contrast, such as a kitchen worktop or a workshop bench. The manufacturer does not state the diameter or the rated life, so measure the ceiling space you have before ordering if clearance is tight. Sold singly, with a minimum order of one. It sits alongside our wider range of recessed round panel downlights in 12W, 18W and 24W, a quick connect GU10 downlight and an emergency downlight.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eSurface mounted downlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight source\u003c\/td\u003e\n\u003ctd\u003eIntegrated LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e12W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrightness\u003c\/td\u003e\n\u003ctd\u003e1090lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour temperature\u003c\/td\u003e\n\u003ctd\u003eCCT adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam angle\u003c\/td\u003e\n\u003ctd\u003e120 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP54, suitable for bathroom zones 2 and 3 only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003e1 fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum order\u003c\/td\u003e\n\u003ctd\u003e1, sold in multiples of 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan I put this in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, within limits. The IP54 rating covers dust and splashing water, which makes it suitable for zones 2 and 3 only: the ceiling and wall area beyond the bath or shower, and the rest of the room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to cut a hole in the ceiling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a surface mounted fitting, so it screws to the face of the ceiling and the cable feeds in behind it. That suits concrete, tiled or awkwardly joisted ceilings where a recessed downlight will not go.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich colour temperatures can I choose?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is CCT adjustable, so the light can be switched between warmer and cooler settings. The manufacturer does not publish the Kelvin figures for each setting, so check the selector on the fitting itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat sort of dimmer does it need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA trailing edge LED dimmer is the usual choice. Check the dimmer's minimum load as well as its maximum, because a single 12W fitting on its own can sit below the threshold of some older dimmers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it take a separate bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo lamp cap is stated and none is needed. The LED is built into the fitting behind the opal diffuser, so there is nothing to buy separately and nothing to change later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich old bulb does 12W replace?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does not state an incandescent equivalent, so compare on lumens instead. At 1090 lumens this sits comfortably above a traditional 60W bulb and close to a 75W one.\u003c\/p\u003e","brand":"LumiLife","offers":[{"title":"Default Title","offer_id":53386237575435,"sku":"S16273","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/S16273_00.jpg?v=1790255597","url":"https:\/\/niori.co.uk\/products\/12w-ip54-cct-adjustable-surface-mounted-downlight-white","provider":"Niori","version":"1.0","type":"link"}