{"product_id":"12v-dc-200w-led-driver-power-supply-ip20-205mm","title":"12V DC 200W LED Driver Power Supply IP20 - 205mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is a 12V DC LED driver and power supply with a rated output of 200W, taking a 220-240V AC mains input and stepping it down to a constant 12 volts for low-voltage LED loads. The POWELED P unit is housed in a white plastic enclosure measuring 205 by 71 by 35 mm, with an IP20 rating that keeps it to dry indoor installation away from damp or splashes. It is the power source for a run, not a lit product in itself.\u003c\/p\u003e\n\u003cp\u003eUse it to drive 12V LED strip, tape and modules, sizing the load so the total wattage of the connected LEDs stays comfortably within the 200W output. Mount it indoors in a ventilated spot such as a cabinet void, ceiling recess or service cupboard, keeping it accessible for wiring. We also stock the 12V LED strips and modules this driver powers, along with connectors and profiles to complete the install.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003e12V DC 200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\u003ctd\u003e220-240 AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e205 × 71 × 35 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can this driver power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt supplies 12V DC at up to 200W, so it runs 12V LED strip, tape and modules. Keep the combined wattage of the connected LEDs within the 200W output for reliable operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means it is for dry indoor use only and offers no protection against water or dust. Fit it indoors in a ventilated, accessible position, or choose an IP65 or higher driver for damp or outdoor sites.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mains supply does it need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt takes a standard 220-240V AC mains input and converts it to a constant 12V DC output. It should be wired by a competent electrician.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a 12V or 24V driver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a 12V DC unit, so it must be matched to 12V LED strips and modules only. A 24V load needs a 24V driver instead, as the voltages are not interchangeable.\u003c\/p\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-28965-spec.pdf?v=1782144725\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-28965-datasheet.pdf?v=1782144726\" target=\"_blank\"\u003eRange Datasheet\u003c\/a\u003e\u003c\/p\u003e\n","brand":"Kanlux","offers":[{"title":"Default Title","offer_id":53200099541259,"sku":"28965","price":69.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/28965.jpg?v=1782144988","url":"https:\/\/niori.co.uk\/products\/12v-dc-200w-led-driver-power-supply-ip20-205mm","provider":"Niori","version":"1.0","type":"link"}