{"product_id":"12v-dc-150w-led-driver-power-supply-ip67-193mm","title":"12V DC 150W LED Driver Power Supply IP67 193mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is a constant-voltage LED driver, decoded from the TRETO IP67 article code as a 12V DC unit rated to 150W. It takes a 220-240V AC mains input and steps it down to a regulated 12V DC output, providing the low-voltage supply that 12V LED loads require. The enclosed white plastic housing measures 193 x 52 x 37 mm and carries an IP67 rating, so it can be used in damp, dusty and exposed locations as well as indoors.\u003c\/p\u003e\n\u003cp\u003eIt powers any 12V DC load up to its 150W capacity, including LED strip runs, COB tape and 12V modules. Always match the driver voltage to the strip (a 12V strip needs this 12V unit, not a 24V one) and keep the total load within the 150W rating. We also stock the 12V LED strips and modules this driver runs, along with the connectors and profiles to complete an installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003e12V DC 150W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\u003ctd\u003e220-240 AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e193 × 52 × 37 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does this driver power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt supplies 12V DC to LED strips, COB tape and 12V LED modules. The output is rated to 150W, so keep the combined load of everything connected within that figure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors or in damp areas?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP67 rating means it is protected against dust and temporary immersion, so it suits outdoor, garden and wet or dusty indoor locations as well as standard dry installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with a 24V LED strip?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a 12V DC unit and must be paired with 12V LED loads only. A 24V strip needs a matching 24V driver, as running it from this would not provide the correct voltage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it wired in?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver connects to a 220-240V AC mains supply on the input side and delivers regulated 12V DC on the output side to your LED load. Wiring should be carried out by a competent electrician.\u003c\/p\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-39518-spec.pdf?v=1782144723\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-39518-datasheet.pdf?v=1782144724\" target=\"_blank\"\u003eRange Datasheet\u003c\/a\u003e\u003c\/p\u003e\n","brand":"Kanlux","offers":[{"title":"Default Title","offer_id":53200098656523,"sku":"39518","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/39518.jpg?v=1782144985","url":"https:\/\/niori.co.uk\/products\/12v-dc-150w-led-driver-power-supply-ip67-193mm","provider":"Niori","version":"1.0","type":"link"}