{"product_id":"12v-dc-100w-led-driver-power-supply-ip67-166mm","title":"12V DC 100W LED Driver Power Supply IP67 166mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis enclosed LED driver takes a 220-240V AC mains input and steps it down to a stable 12V DC output, rated at 100W. The sealed plastic housing measures 166 x 43 x 33 mm and carries an IP67 rating, so it copes with dust, damp and sheltered outdoor positions where an indoor driver would not be suitable. It supplies power to low-voltage LED loads and does not itself produce any light.\u003c\/p\u003e\n\u003cp\u003eAny 12V DC LED strip, module or profile run drawing up to 100W can be wired to its output, leaving plenty of headroom for longer runs or grouped fittings. Match the load voltage to 12V and keep the total wattage within the 100W limit. We also stock the 12V LED strips, COB tape and LED modules this unit is built to power, along with connectors to wire them in.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003e12V DC 100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\u003ctd\u003e220-240 AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e166 × 43 × 33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does this driver power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt powers 12V DC LED loads such as flexible strips, COB tape, LED modules and profile runs. Keep the load at 12V and within the 100W rated output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP67 rating means it is protected against dust and temporary immersion, so it suits damp, exposed and sheltered outdoor locations as well as indoor use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum load I can connect?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver delivers up to 100W at 12V DC. Add up the wattage of every fitting on the run and keep the total below 100W, allowing a little spare capacity for reliability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it wired in?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 220-240V AC mains supply connects to the input side and the 12V DC LED load to the output side. Wiring should be carried out by a competent person in line with local electrical regulations.\u003c\/p\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-39516-spec.pdf?v=1782144723\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-39516-datasheet.pdf?v=1782144724\" target=\"_blank\"\u003eRange Datasheet\u003c\/a\u003e\u003c\/p\u003e\n","brand":"Kanlux","offers":[{"title":"Default Title","offer_id":53200098590987,"sku":"39516","price":38.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/39516.jpg?v=1782144985","url":"https:\/\/niori.co.uk\/products\/12v-dc-100w-led-driver-power-supply-ip67-166mm","provider":"Niori","version":"1.0","type":"link"}