{"product_id":"12v-dc-100w-led-driver-power-supply-ip20-180mm","title":"12V DC 100W LED Driver Power Supply IP20 180mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is a constant-voltage LED driver that takes a 220 to 240V AC mains input and outputs a steady 12V DC, rated up to 100W. It is the power supply a 12V LED load needs to run, since a low-voltage strip or module cannot connect to the mains directly. The white plastic housing measures 180 x 66 x 32 mm and carries an IP20 rating, so it is for dry indoor installation only and should be kept away from damp or exposed locations.\u003c\/p\u003e\n\u003cp\u003eUse it to drive 12V DC LED strips, COB tape, LED modules and profile-mounted runs, keeping the total connected wattage within the 100W output so the supply runs comfortably. Match the driver voltage to the load: this unit is 12V and should not be paired with 24V strip. We also stock the 12V LED strips, COB tape and LED modules this driver is built to power, along with the profiles and connectors to complete the run.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003e12V DC 100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\u003ctd\u003e220-240 AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e180 × 66 × 32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can this driver power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt powers 12V DC LED loads such as flexible strips, COB tape and LED modules. Keep the combined wattage of everything connected within its 100W output for reliable running.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is an IP20 unit intended for dry indoor installation only. For damp, sheltered or outdoor positions you would need a higher-rated enclosed driver, typically IP65 or above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with a 24V strip?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This driver outputs 12V DC, so it must be paired with 12V LED loads only. A 24V strip needs a matching 24V driver instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I wire it in?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 220 to 240V AC mains connects to the input side and the 12V DC output runs to the LED load. Wiring should be carried out by a competent electrician in line with local regulations.\u003c\/p\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-28961-spec.pdf?v=1782144725\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-28961-datasheet.pdf?v=1782144725\" target=\"_blank\"\u003eRange Datasheet\u003c\/a\u003e\u003c\/p\u003e\n","brand":"Kanlux","offers":[{"title":"Default Title","offer_id":53200099442955,"sku":"28961","price":43.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/28961.jpg?v=1782144987","url":"https:\/\/niori.co.uk\/products\/12v-dc-100w-led-driver-power-supply-ip20-180mm","provider":"Niori","version":"1.0","type":"link"}