{"product_id":"12v-24v-led-strip-to-strip-connector-single-colour-8mm","title":"12V\/24V LED Strip to Strip Connector - Single Colour 8mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge strip-to-strip connector joins two lengths of 8mm single-colour LED flex without soldering. The polycarbonate housing measures 24mm x 12mm x 7mm and uses a clip mechanism on each end to lock onto the copper pads of the flex strip, establishing electrical contact for both 12V and 24V low-voltage systems.\u003c\/p\u003e\n\u003cp\u003eDesigned for indoor accent lighting installations where LED flex runs need to turn corners, span gaps, or extend beyond a single 5m reel, the connector maintains power continuity across the join. The IP20 rating limits use to dry interior locations such as under-cabinet lighting in kitchens, shelf lighting in retail display units, cove lighting in living rooms, and architectural accent strips in hallways or staircases.\u003c\/p\u003e\n\u003cp\u003eThe black polycarbonate finish sits flush against the back of the LED strip once clipped, keeping the connector low-profile when the installation is viewed from the front. Class III construction means the connector operates safely at extra-low voltage with no risk of mains electric contact. The clip design allows the connector to be removed and repositioned during testing or reconfiguration without damaging the flex strip, provided the copper contact pads remain clean.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e24 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626299_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with RGB or colour-changing LED strip?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This connector is designed only for single-colour LED flex with two copper contact pads. RGB and RGBW strips require 4-pin or 5-pin connectors to carry the separate colour channels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs soldering required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connector uses a clip mechanism that presses internal contact pins onto the copper pads of the LED strip. Ensure the copper pads are clean and free from oxidation before clipping the connector into place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the connector is not protected against moisture ingress and must only be used in dry indoor locations. Outdoor or bathroom installations require IP65 or IP67 rated connectors and matching flex.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width of LED strip does it fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is sized for 8mm-wide single-colour LED flex. It will not fit 10mm-wide strips or narrow 5mm variants. Check the strip width specification before ordering.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293624066315,"sku":"LFCON2SS","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/807710_81ad3a3e-185f-4d21-bf4f-1f5f3138e5fa.jpg?v=1714661314","url":"https:\/\/niori.co.uk\/products\/12v-24v-led-strip-to-strip-connector-single-colour-8mm","provider":"Niori","version":"1.0","type":"link"}