{"product_id":"12v-24v-ip65-led-flex-wire-to-strip-connector-single-colour-10mm","title":"12V\/24V IP65 LED Flex Wire to Strip Connector - Single Colour 10mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge wire-to-strip connector joins a power cable to 10mm single-colour LED flex using a clip-in polycarbonate housing rated at IP65. The connector accepts 12V or 24V low-voltage input and requires no soldering or specialist tools — the LED strip slots into one end, the wire into the other, and spring-loaded contacts make the electrical connection when the cover clips shut.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, kitchens, under-cabinet installations and covered outdoor areas where moisture ingress is a concern, the IP65 rating protects the electrical contacts from water jets and dust. The 26mm length and 15mm width give a compact footprint that fits into shallow installation gaps behind pelmets, inside aluminium extrusions, and under wall-mounted cabinets. The short cable tail allows neat routing around corners without exposing bare strip ends.\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate body resists minor impacts and UV degradation better than standard PVC housings. For installations subject to frequent splashing or submersion, applying a bead of silicone sealant (sold separately) around the cable entry and strip entry points strengthens the IP65 seal. The connector is compatible with Knightsbridge LFC24IPxx series single-colour LED flex and other 10mm-wide single-colour strips using the same contact spacing.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e26 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626303_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_832604.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this connector require soldering?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connector uses spring-loaded contacts inside a clip-shut polycarbonate housing. Slot the LED strip into one end and the power cable into the other, then close the cover to complete the connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED strip does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is designed for 10mm-wide single-colour LED flex. It is compatible with Knightsbridge LFC24IPxx series strips and other 10mm single-colour strips with the same contact spacing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating protects against water jets and dust, making it suitable for covered outdoor areas such as under eaves, canopies or pergolas. It is not rated for full submersion. For installations subject to frequent splashing, apply silicone sealant around the cable and strip entry points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used with 12V and 24V systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The connector accepts both 12V and 24V low-voltage input. Ensure the LED flex being connected is rated for the same voltage as the power supply.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293625409803,"sku":"LFCONIP2WS","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/807718_d8821cc5-6594-44b5-a8de-139f36e582f8.jpg?v=1714661328","url":"https:\/\/niori.co.uk\/products\/12v-24v-ip65-led-flex-wire-to-strip-connector-single-colour-10mm","provider":"Niori","version":"1.0","type":"link"}