{"product_id":"12v-10w-led-driver-power-supply-ip20","title":"12V 10W LED Driver Power Supply IP20","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eDecoded from the article code CIRCO N LED 12VDC 10W, this is a constant-voltage LED driver supplying a regulated 12V DC output at up to 10W. It runs from a standard 220-240V AC mains input and converts it to the low-voltage DC that 12V LED loads require. The compact round housing measures Ø54.5 × 23 mm in a white plastic finish, keeping it easy to tuck behind a fitting or into a recess.\u003c\/p\u003e\n\u003cp\u003eUse it to power 12V LED strips, tape, modules or small fittings whose combined load stays within the 10W rating. The IP20 rating means it is for dry indoor positions only, so site it away from damp or splash areas. Always match the driver voltage to the load: this unit is 12V DC and should not be wired to a 24V strip. We also stock 12V LED strips and LED modules this driver can power, along with profiles and connectors to complete the run.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003e10W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\u003ctd\u003e220-240 AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eØ54.5 × 23 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can this driver power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt powers 12V DC LED loads such as strips, tape and modules, up to a total of 10W. Add the wattage of every section you intend to connect and keep it within that figure for reliable operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the output voltage and wattage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe output is a regulated 12V DC at up to 10W. It takes a 220-240V AC mains input and converts it to the low voltage your LED load needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This driver is rated IP20, so it is suitable for dry indoor locations only. For damp, splash or outdoor positions choose a sealed IP65 or higher rated driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I wire it in?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnect the 220-240V AC mains to the input terminals and the 12V LED load to the output, observing polarity. If you are unsure, have the connection made by a qualified electrician.\u003c\/p\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-24242-spec.pdf?v=1782144726\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-24242-datasheet.pdf?v=1782144726\" target=\"_blank\"\u003eRange Datasheet\u003c\/a\u003e\u003c\/p\u003e\n","brand":"Kanlux","offers":[{"title":"Default Title","offer_id":53200099606795,"sku":"24242","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/24242.jpg?v=1782144989","url":"https:\/\/niori.co.uk\/products\/12v-10w-led-driver-power-supply-ip20","provider":"Niori","version":"1.0","type":"link"}