{"product_id":"10ax-1-way-pull-cord-switch-white","title":"10AX 1 Way Pull Cord Switch - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SN8290 is a 10AX 1-way pull cord switch in white thermoset resin, supplied with a 1.7m braided pull cord. The switch mounts to a standard ceiling back box and operates single-circuit lighting via a pull-to-toggle mechanism, each pull alternating between on and off.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, utility rooms, loft spaces and garages where a wall-mounted switch is impractical or would breach wiring regulations, the pull cord allows switching from below the ceiling rose without touching the electrical fitting itself. The IP20 rating makes it suitable for dry indoor locations and Zone 3 bathroom areas (600mm+ from bath\/shower enclosures). The 76mm diameter ceiling rose sits flush once fitted and the 43mm projection keeps the assembly compact.\u003c\/p\u003e\n\u003cp\u003eThe thermoset resin construction resists heat and mechanical impact better than standard thermoplastics, giving the switch durability in high-use settings. The 10AX rating handles loads up to 2,300W on 230V mains, covering most domestic lighting circuits including multi-bulb fittings and LED arrays. The switch is certified to EN 60669-1 and carries a 25-year warranty from Knightsbridge.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e43 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eThermoset resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2001926_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1150422.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP20 rating suits Zone 3 bathroom areas, which are 600mm or more from the edge of a bath or shower enclosure. It cannot be installed in Zone 0, 1 or 2 (inside or immediately adjacent to baths and showers) without a higher IP-rated enclosure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe switch mounts to a standard UK ceiling back box with 60.3mm fixing centres. The 76mm diameter rose covers most standard ceiling roses once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat load does 10AX support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e10AX at 230V mains supports loads up to 2,300W, which covers most domestic lighting circuits including multi-bulb chandeliers, LED strip arrays and halogen downlight clusters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the cord length be adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cord is supplied at 1.7m and can be shortened on installation by knotting or cutting to the desired drop. Replacement cords are available separately if the original becomes worn.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293969604875,"sku":"SN8290","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/158968_dbe8fee1-a831-45e9-b8bf-1b3ef4bc6286.jpg?v=1714666984","url":"https:\/\/niori.co.uk\/products\/10ax-1-way-pull-cord-switch-white","provider":"Niori","version":"1.0","type":"link"}