{"product_id":"100w-24v-constant-voltage-dimmable-led-driver","title":"100W 24V Constant Voltage Dimmable LED Driver","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 24DC100D is a 100W constant voltage LED driver that converts 230V mains to 24V DC output for LED strip lighting, tape lights and other 24V LED installations. The driver delivers a fixed voltage rather than regulating current, making it suitable for runs of LED tape where the tape itself contains current-limiting resistors.\u003c\/p\u003e\n\u003cp\u003eDesigned for internal installations in homes, offices, retail and hospitality environments, the driver supports dimming when paired with most trailing-edge (reverse-phase) dimmer switches. The IP20 rating means it must be installed in dry locations such as above ceilings, inside joinery or within electrical enclosures where it will not be exposed to moisture. The 210mm x 67mm x 34mm housing fits into ceiling voids and cabinet plinths commonly found in UK residential and commercial builds.\u003c\/p\u003e\n\u003cp\u003eThe driver includes open-circuit, short-circuit, overload and over-temperature protections that shut down output if a fault is detected, preventing damage to both the driver and the connected LED load. The Class II (double-insulated) construction means no earth connection is required, simplifying installation in older properties or retrofit scenarios where earthing may be inconsistent. The white ABS housing with blue end caps provides clear visual identification during installation and maintenance.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e210 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e34 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e67 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eTrailing-edge only*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2463231_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_837468.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between constant voltage and constant current drivers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConstant voltage drivers like the 24DC100D provide a fixed 24V output and are designed for LED products that regulate their own current internally, such as most LED tape and strip lighting. Constant current drivers regulate the current flowing through the LEDs and are used for LED fixtures that require current control, such as downlights and spotlight modules.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be dimmed with any dimmer switch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver is compatible with most trailing-edge (reverse-phase) dimmer switches. Leading-edge dimmers are not recommended and may cause flickering, buzzing or failure to dim smoothly. Check the dimmer manufacturer's compatibility list or test the combination before final installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can the driver be installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating means the driver must be installed in dry, dust-free locations such as ceiling voids, behind false walls, inside joinery or within electrical enclosures. It cannot be installed in bathrooms, kitchens near sinks, outdoors or any location where it may be exposed to moisture or condensation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length of LED tape can the driver power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe maximum tape length depends on the wattage per metre of the LED tape being used. For example, if the tape draws 10W per metre, the driver can power up to 10 metres (100W total). Always check the tape specification and ensure the total load does not exceed 100W.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293733380363,"sku":"24DC100D","price":57.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/157962_37fcdfda-22e0-4029-a2dd-36eac010fe28.jpg?v=1714663459","url":"https:\/\/niori.co.uk\/products\/100w-24v-constant-voltage-dimmable-led-driver","provider":"Niori","version":"1.0","type":"link"}