{"title":"XLR Cables","description":"\u003cp\u003eOur XLR cables cover the leads a stage, a studio or a PA system uses every day. Most are Citronic leads: balanced XLR microphone leads in black and in colours, XLR to jack leads for mixers and audio interfaces, and twin XLR leads to RCA or jack for connecting other equipment to a mixing desk. Lengths run from short patch leads under a metre to long stage runs of ten metres and more.\u003c\/p\u003e","products":[{"product_id":"qtx-dmx-lighting-lead-3-pin-xlr-plug-to-3-pin-xlr-socket-1-5m","title":"QTX DMX Lighting Lead 3-Pin XLR Plug to 3-Pin XLR Socket - 1.5m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX DMX Lighting Lead is a 1.5m cable with a 3-pin XLR plug on one end and a 3-pin XLR socket on the other, designed to carry DMX512 control signals between lighting controllers and fixtures. The 4mm diameter cable uses shielded construction to reduce electromagnetic interference and crosstalk, maintaining signal integrity across short cable runs.\u003c\/p\u003e\n\u003cp\u003eThis length works in rack-mounted control setups where a DMX controller sits directly above or below a dimmer pack or fixture controller, and in stage setups where fixtures are positioned within 1-2m of the signal source or previous fixture in a daisy chain. The 1.5m length minimises cable clutter in tight spaces like small studios, mobile DJ rigs, and compact stage setups where longer cables would create excess slack and tripping hazards.\u003c\/p\u003e\n\u003cp\u003eThe 3-pin XLR connectors are the standard for DMX lighting control, compatible with the majority of moving heads, LED parcans, DMX dimmers and lighting consoles on the market. The plug and socket housings are moulded plastic with metal shells that provide strain relief at the cable entry point. The cable jacket is flexible enough to route through cable trays and around corners without kinking.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003e4.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is this cable used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis cable carries DMX512 control signals from a lighting controller or console to DMX-compatible fixtures like moving heads, LED parcans and dimmer packs. It can also link fixtures in a daisy chain by connecting the DMX Out socket on one fixture to the DMX In socket on the next.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for audio?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the 3-pin XLR connectors physically match audio microphone cables, this cable is optimised for DMX data transmission rather than balanced audio. For best results, use dedicated microphone cable for audio and dedicated DMX cable for lighting control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many fixtures can be connected in a chain?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDMX512 protocol supports up to 32 fixtures per DMX universe in a daisy chain, though in practice the limit depends on the quality of the cable run and the input impedance of the fixtures. This 1.5m cable would typically be one section in a longer chain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable jacket provides basic moisture resistance for indoor and covered outdoor environments. For exposed outdoor use in rain or damp conditions, consider housing the connectors under protective covers or using IP-rated DMX connectors.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313330479371,"sku":"177.901UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/177901UK_0.jpg?v=1784895832"},{"product_id":"qtx-dmx-lighting-lead-3-pin-xlr-plug-to-3-pin-xlr-socket-3m","title":"QTX DMX Lighting Lead 3-Pin XLR Plug to 3-Pin XLR Socket - 3m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX DMX Lighting Lead is a 3m shielded cable with a 3-pin XLR male plug at one end and a 3-pin XLR female socket at the other, designed to carry DMX512 control signals between lighting controllers and fixtures. The 4mm outer diameter cable uses internal shielding to reduce electromagnetic interference, maintaining signal integrity across the run.\u003c\/p\u003e\n\u003cp\u003eDesigned for stage lighting, studio setups and event installations where fixtures need to be daisy-chained or patched into a DMX controller, the 3m length suits close-proximity runs between adjacent fixtures, from a dimmer pack to a fixture, or from a controller to the first fixture in a chain. The flexible outer jacket allows the cable to be routed around rigging and truss without kinking, and the XLR connectors lock securely to prevent accidental disconnection during use.\u003c\/p\u003e\n\u003cp\u003eThe cable conforms to the DMX512-A standard, which specifies 3-pin XLR as the connector type for basic lighting control systems. The shielding on the inner conductors reduces the risk of signal degradation from nearby mains cables or RF interference, which can otherwise cause flickering or erratic behaviour in DMX-controlled fixtures. The 3m length keeps cable clutter manageable in smaller rigs while providing enough reach for typical fixture spacing on a bar or stand.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003e4.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between DMX cable and standard XLR audio cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDMX cable uses a specific impedance (110Ω) and twisted-pair construction to carry the DMX512 digital signal accurately. Standard audio XLR cable has different impedance and may cause signal errors or dropouts when used for DMX over longer runs. For short 3m runs the difference is less critical, but DMX-rated cable is always the correct choice for lighting control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I daisy-chain multiple fixtures using this cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 3-pin XLR socket on one end connects to the DMX output of a controller or the DMX output of the previous fixture in the chain, and the 3-pin XLR plug on the other end connects to the DMX input of the next fixture. The DMX512 standard supports up to 32 fixtures on a single chain, though practical limits depend on the quality of the fixtures and cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this cable suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable itself is flexible and shielded, but it is not rated for permanent outdoor installation or exposure to water. For outdoor events where the cable may be exposed to rain or ground moisture, it should be protected or replaced with an IP-rated outdoor DMX cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length runs are possible before needing a DMX booster?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe DMX512-A standard recommends a maximum run of 300m before signal degradation becomes a concern. In practice, runs beyond 150m often benefit from a DMX splitter or booster to maintain signal quality, especially if the chain includes more than 16 fixtures. For a 3m cable, signal loss is not a concern.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313330675979,"sku":"177.904UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/177904UK_0.jpg?v=1784895845"},{"product_id":"qtx-dmx-lighting-lead-3-pin-xlr-plug-to-3-pin-xlr-socket-6m","title":"QTX DMX Lighting Lead 3-Pin XLR Plug to 3-Pin XLR Socket - 6m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX DMX lighting lead is a 6m shielded cable with a 3-pin XLR male plug at one end and a 3-pin XLR female socket at the other, built for transmitting DMX512 control signals between lighting controllers and fixtures. The 4mm outer diameter cable houses shielded conductors that reduce interference from nearby mains cables and radio frequency noise, maintaining signal integrity across typical stage and studio runs.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation in DMX lighting chains where multiple fixtures are linked in series, the cable connects the DMX output of a controller or the DMX pass-through of one fixture to the DMX input of the next. The 6m length suits short-to-medium runs between fixtures positioned across a stage, truss or studio rig without requiring excessive cable coiling. The shielded construction makes the cable suitable for environments with high electrical noise, such as live music venues with amplifiers and power distribution nearby.\u003c\/p\u003e\n\u003cp\u003eBoth XLR connectors use metal shells with strain relief boots that protect the solder joints from repeated plugging and unplugging. The cable jacket is flexible enough to route around obstacles and through cable trays without kinking, while retaining enough body to avoid tangling when coiled for transport. The cable meets the impedance and capacitance requirements of the DMX512 protocol, ensuring compatibility with standard DMX lighting equipment from manufacturers including ADJ, Chauvet, Martin and Showtec.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003e4.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used for audio?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. While the connectors are 3-pin XLR, DMX cables use a different impedance specification (120Ω) than microphone cables (typically 75Ω or lower). Using a DMX cable for audio may work over short runs but can degrade signal quality. Use dedicated audio XLR cables for microphones and line-level connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many fixtures can be daisy-chained on a single DMX line?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe DMX512 specification supports up to 32 devices on a single DMX universe. In practice, 20-25 fixtures is a more reliable working limit, especially when using multiple cable runs totaling over 50m. Beyond this, signal degradation or timing errors may occur without a DMX splitter or booster.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable need termination?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe last fixture in a DMX chain should ideally have a 120Ω terminator plugged into its DMX output socket to prevent signal reflections. Many modern fixtures have built-in termination or auto-termination, but if you notice flickering or erratic behaviour on the last fixture in the chain, try adding a terminator plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum recommended cable run length for DMX?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe DMX512 standard specifies a maximum run length of 300m without a repeater or booster. In real-world installations with multiple connectors and fixtures, keeping individual cable runs under 100m total per universe provides a safety margin against signal loss.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313330708747,"sku":"177.907UK","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/177907UK_0.jpg?v=1784895857"},{"product_id":"qtx-dmx-lighting-lead-3-pin-xlr-plug-to-3-pin-xlr-socket-10m","title":"QTX DMX Lighting Lead 3-Pin XLR Plug to 3-Pin XLR Socket - 10m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX DMX lighting lead is a 10m shielded cable with a 3-pin XLR male plug at one end and a 3-pin XLR female socket at the other, designed to carry DMX512 control signals between lighting controllers and fixtures. The 4.0mm diameter cable uses a copper shield around the signal conductors to reduce electromagnetic interference from mains cables, radio frequencies and other sources that can corrupt DMX data in live event environments.\u003c\/p\u003e\n\u003cp\u003eUsed to link DMX-compatible lighting fixtures in a daisy-chain configuration, the lead connects the DMX output of a lighting controller to the first fixture, then from fixture to fixture along the rig until all are addressed. The 10m length suits medium-sized stage setups, mobile DJ rigs and installed church or theatre lighting where fixtures are spaced 3-8m apart. The cable is flexible enough to route through truss, around stage edges and behind equipment without kinking.\u003c\/p\u003e\n\u003cp\u003eThe 3-pin XLR connectors use a locking collar that rotates to secure the connection and prevent accidental disconnection when the cable is moved or tugged during rigging. The metal bodies on both plug and socket provide strain relief where the cable enters the connector, reducing wear at the point where cables most commonly fail. The shielded construction keeps the DMX signal clean over the full 10m run, maintaining reliable communication between controller and fixtures without requiring signal boosters or repeaters.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003e4.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is DMX512 and what does this cable carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDMX512 is a digital control protocol used in stage and event lighting to send instructions from a controller to multiple fixtures simultaneously. This cable carries the DMX512 data signal, which tells each fixture what colour, intensity, strobe pattern or movement to execute. It does not carry power. Fixtures need separate mains or low-voltage power cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I connect multiple cables to extend the run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. You can connect multiple DMX leads end-to-end by plugging the male XLR of one cable into the female XLR socket of another. However, DMX512 has a maximum recommended cable run of 300-400m before signal degradation becomes an issue. For runs longer than 300m, use a DMX signal booster or splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with 5-pin XLR fixtures?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a 3-pin XLR cable. Some professional lighting fixtures use 5-pin XLR connectors for DMX, which require a 5-pin cable or a 3-pin to 5-pin adapter. Check your fixtures before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable need to be terminated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDMX512 specification recommends terminating the last fixture in a chain with a 120-ohm resistor to prevent signal reflections that can cause flickering or erratic behaviour. Some fixtures have a built-in termination switch; if not, you can use a separate XLR terminator plug on the last fixture in the line.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313330839819,"sku":"177.910UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/177910UK_0.jpg?v=1784895870"},{"product_id":"qtx-dmx-lighting-lead-3-pin-xlr-plug-to-3-pin-xlr-socket-20m","title":"QTX DMX Lighting Lead 3-Pin XLR Plug to 3-Pin XLR Socket - 20m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX DMX lighting lead is a 20m cable with a 3-pin XLR male plug at one end and a 3-pin XLR female socket at the other, designed to carry DMX512 control signals between lighting fixtures, controllers and dimmer packs. The 4mm diameter cable uses shielded construction to reduce electrical interference from mains cables, radio transmitters and other stage equipment that can disrupt DMX data transmission.\u003c\/p\u003e\n\u003cp\u003eDesigned for stage rigs, event production and installation environments where lighting fixtures need to be chained over distances beyond the reach of a single short cable, the 20m length allows fixtures to be positioned across large performance spaces, warehouse venues and outdoor stages without requiring multiple cable joins. The 3-pin XLR connectors use metal shells with spring-loaded locking tabs that resist accidental disconnection during setup, teardown and live performance.\u003c\/p\u003e\n\u003cp\u003eThe cable jacket is rated for repeated coiling and uncoiling without fracturing the internal shielding or conductors, making it suitable for touring rigs where the same cable may be set up and packed down multiple times per week. The 4mm outer diameter gives the cable enough mass to resist tangling when laid across a stage floor but remains flexible enough to route around obstacles without requiring excessive slack. The XLR connectors are numbered 1-3 internally to match the DMX512 pin assignment standard used across most modern lighting fixtures.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003e4.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is this cable used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis cable carries DMX512 control signals between lighting controllers, dimmers and fixtures in stage, event and installation lighting systems. It allows you to control fixture parameters such as colour, dimming, movement and effects from a central lighting desk or software controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple cables be chained together?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 3-pin XLR plug to socket design allows multiple cables to be connected in series to extend the DMX signal chain. DMX512 protocol supports up to 32 fixtures per universe over a maximum recommended cable run of 300-400m before signal degradation becomes an issue, though using a DMX splitter or repeater is recommended for larger installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this cable compatible with audio XLR equipment?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePhysically the connectors will fit, but DMX cable and audio XLR cable use different impedance ratings. DMX cable is typically 110-120 ohm, while audio microphone cable is 50-75 ohm. Using audio cable for long DMX runs or vice versa can cause signal issues. For short runs under 10m the difference is often negligible, but for a 20m cable it is best to use the correct specification for the application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the cable stored between uses?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCoil the cable in loose loops approximately 300-400mm in diameter and secure with a velcro tie or cable wrap. Avoid tight coiling or kinking the cable, as this can damage the internal shielding over time. Store in a dry location away from sharp objects and heavy equipment that might crush the cable jacket.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313330872587,"sku":"177.913UK","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/177913UK_0.jpg?v=1784895883"},{"product_id":"qtx-dmx-lighting-lead-3-pin-xlr-plug-to-3-pin-xlr-socket-0-75m","title":"QTX DMX Lighting Lead 3-Pin XLR Plug to 3-Pin XLR Socket - 0.75m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX DMX lighting lead is a 0.75m shielded cable with a 3-pin XLR male plug on one end and a 3-pin XLR female socket on the other, used to connect DMX lighting fixtures in a daisy chain or to link a controller to the first fixture in a lighting rig. The 4mm diameter cable uses a flexible outer jacket over internal shielding to reduce electromagnetic interference from nearby mains cables, radio-frequency sources and other stage equipment.\u003c\/p\u003e\n\u003cp\u003eThis short lead length suits tight configurations where fixtures are mounted close together on a truss, or where a controller sits near the first fixture in the chain. Lighting technicians use 0.75m leads to reduce cable clutter on stage floors and truss runs, keeping the DMX signal path tidy without leaving excess cable coiled behind fixtures. The shielding helps maintain signal integrity when the cable runs alongside mains power feeds or audio snakes, which is common in stage and event setups.\u003c\/p\u003e\n\u003cp\u003eThe 3-pin XLR connectors use a standard pinout compatible with most DMX512 fixtures and controllers. The flexible jacket allows the cable to be routed around stands, through cable trays and along truss without kinking, and the shielding provides interference resistance when multiple cables run in parallel. The cable is designed for repeated handling during load-in and strike, and the outer jacket resists scuffing on rough floors and truss edges.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003e4.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this cable suitable for DMX512 protocol?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The QTX lead uses a 3-pin XLR configuration with internal shielding, which is standard for DMX512 lighting control. It carries data signals from a lighting controller to fixtures or between fixtures in a daisy chain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between DMX cable and audio XLR cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDMX cables use a higher impedance rating (typically 120 ohm) and better shielding than standard audio XLR cables to maintain digital signal integrity over longer runs. While audio XLR cables may work for short DMX chains, dedicated DMX cable reduces the risk of data errors and fixture drop-outs in professional lighting rigs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable is designed for stage and event use, which includes temporary outdoor setups. However, the connectors are not IP-rated, so they should not be left exposed to prolonged rain or submersion. For outdoor use, keep connectors dry and off the ground.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum chain length for DMX?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDMX512 protocol allows up to 32 devices on a single chain, with a maximum total cable run of approximately 300-400m before signal degradation becomes an issue. For longer runs or more devices, a DMX splitter or repeater is needed to regenerate the signal.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313330905355,"sku":"177.914UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/177914UK_0.jpg?v=1784895896"},{"product_id":"citronic-xlrf-usb2-xlr-to-usb-converter-lead","title":"Citronic XLRF-USB2 XLR to USB Converter Lead","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic XLRF-USB2 is an analogue to digital conversion lead with an XLR female (XLRF) connector at one end and a USB type A connector at the other. It lets you connect a line input, instrument or dynamic microphone straight into a PC or Mac, so you can record without a separate audio interface. It's a plug-and-play setup that draws power over the USB bus, meaning there's nothing extra to plug in.\u003c\/p\u003e\n\u003cp\u003eAudio is handled with up to 48kHz analogue to digital (A\/D) conversion, running a 16bit sampling format at either 48kHz or 44.1kHz. The signal-to-noise ratio is 83dB with a dynamic range of 80dB, and frequency response runs from 20Hz to 19kHz at 48kHz. Input impedance sits at 1M Ohm, input level covers 0 to 2.8Vpp and there's +20dB of gain on tap. THD+N is quoted at -76dB (-3dBr). The lead measures 3.0m and weighs 174g, giving you room to position your mic or instrument away from the computer.\u003c\/p\u003e\n\u003cp\u003eThis lead suits digital recording of vocal lines, instruments and podcasts where you want a direct, no-fuss route into your recording software. It works with Windows 2000, XP, 7 and 8, along with Mac OS X 10.1 and above. Because there are no drivers to install and no mains supply to find, it's a handy option for anyone getting started with home recording or capturing quick takes on the move.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eXLRF - USB type A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003e3.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput impedance\u003c\/td\u003e\n\u003ctd\u003e1M Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSampling format\u003c\/td\u003e\n\u003ctd\u003e16bit @ 48\/44.1kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput level\u003c\/td\u003e\n\u003ctd\u003e0-2.8Vpp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD +N\u003c\/td\u003e\n\u003ctd\u003e-76dB (-3dBr)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\/N ratio\u003c\/td\u003e\n\u003ctd\u003e83dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDynamic range\u003c\/td\u003e\n\u003ctd\u003e80dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e20Hz-19kHz (@48kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGain\u003c\/td\u003e\n\u003ctd\u003e+20dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.17KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does the lead have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has an XLR female (XLRF) connector at one end and a USB type A connector at the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a separate power supply?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The lead is USB bus powered, so it draws power from your computer's USB port with nothing else to plug in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich operating systems is it compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt works with Windows 2000, XP, 7 and 8, and with Mac OS X 10.1 and above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it with a dynamic microphone?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. You can connect a line input, instrument or dynamic microphone directly to a PC or Mac for recording.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat sampling quality does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt offers up to 48kHz A\/D conversion, using a 16bit sampling format at 48kHz or 44.1kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead measures 3.0m, giving you room to position your mic or instrument away from the computer.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271840653579,"sku":"173.616UK","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/173616UK_0.jpg?v=1784997318"},{"product_id":"citronic-2xf-2xm075-twin-xlr-audio-lead-0-75m","title":"Citronic 2XF-2XM075 Twin XLR Audio Lead 0.75m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead carries two balanced signals in a single twinned cable, with two female XLR connectors at one end and two male XLR connectors at the other. It measures 0.75m, which makes it handy for short runs between mixers, stage boxes and outboard gear where you want to keep two channels tidy and together.\u003c\/p\u003e\n\u003cp\u003eThe cable uses pure copper conductors, each made from 12 strands at 0.1mm diameter, with cotton reinforcement to help it stand up to repeated coiling and gigging. The twin cable runs at 5mm diameter (5 x 10mm) under a soft-grip, anti-tangle rubberised jacket. Shielding keeps interference down, so you get clean, quiet signal across both channels. The die-cast XLR connectors are machine soldered for consistent, reliable joints.\u003c\/p\u003e\n\u003cp\u003eWiring follows the standard balanced pin-out: pin 1 ground, pin 2 hot and pin 3 cold. That means the lead works with balanced inputs and outputs on most professional and semi-professional audio equipment. If you regularly patch stereo pairs or two mono sources at once, this twin lead saves you carrying two separate cables and keeps your setup neater on stage or in the rack.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e0.75m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x female XLR, 2 x male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin-out\u003c\/td\u003e\n\u003ctd\u003eBalanced: 1-Ground, 2-Hot, 3-Cold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is this cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is 0.75m long, suited to short runs between nearby equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo female XLR connectors on one end and two male XLR connectors on the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the lead balanced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It follows a balanced pin-out: pin 1 ground, pin 2 hot, pin 3 cold.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the conductors made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePure copper, with each run using 12 strands at 0.1mm diameter and cotton reinforcement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this for a stereo pair?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The twin cable carries two channels at once, ideal for stereo or two mono sources.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272069669131,"sku":"190.028UK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190028UK_0.jpg?v=1785031343"},{"product_id":"citronic-2xf-2xm150-twin-xlr-audio-lead-1-5m","title":"Citronic 2XF-2XM150 Twin XLR Audio Lead 1.5m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead gives you two balanced XLR connections in a single cable, running from 2 x female XLR to 2 x male XLR over a length of 1.5 metres. It is built for pro use, with die-cast XLR connectors at each end and machine-soldered connections that hold up to regular plugging and unplugging. We think of it as a reliable workhorse for stage, studio and installation setups where you need to link two channels at once.\u003c\/p\u003e\n\u003cp\u003eThe cable itself is a twinned high-grade design, measuring 5mm in diameter across each core (5 x 10mm overall). Inside you get pure copper conductors, each made from 12 strands at 0.1mm, with cotton reinforcement for extra strength. The outer jacket is a soft-grip, rubberised, anti-tangle finish, so the lead sits flat and stays out of your way during setup and pack-down. Shielding across the run helps keep interference out and keeps your signal clean.\u003c\/p\u003e\n\u003cp\u003eThe pin-out follows the standard balanced wiring: pin 1 to ground, pin 2 hot and pin 3 cold. That makes it a straight fit for mixers, powered speakers, active DI boxes and other balanced gear. Running two links in one lead cuts down on cable clutter and speeds up patching when you are working with stereo sources or paired inputs. If you want dependable connections without fuss, this is a solid choice for both fixed installs and mobile rigs.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x female XLR, 2 x male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin-out\u003c\/td\u003e\n\u003ctd\u003eBalanced: 1-Ground, 2-Hot, 3-Cold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has 2 x female XLR at one end and 2 x male XLR at the other, all fitted with die-cast connectors and machine-soldered connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 1.5 metres long, which suits close patching between mixers, speakers and other balanced gear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a balanced cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It uses balanced wiring with pin 1 to ground, pin 2 hot and pin 3 cold, so it works with standard balanced audio equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses pure copper conductors, each with 12 strands at 0.1mm, plus cotton reinforcement and a soft-grip rubberised outer jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a twin XLR lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA twin lead carries two channels in one cable, which reduces clutter and speeds up patching for stereo sources or paired inputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs XLR the same as a microphone cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eXLR is the connector type used on many microphone and balanced signal cables. This lead is wired for balanced audio use.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272069701899,"sku":"190.029UK","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190029UK_0.jpg?v=1785031373"},{"product_id":"citronic-2xf-2xm300-dual-xlr-balanced-audio-cable-3m","title":"Citronic 2XF-2XM300 Dual XLR Balanced Audio Cable 3m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eOur Citronic 2XF-2XM300 is a twin XLR audio lead measuring 3 metres, terminated with two female XLR and two male XLR connectors at either end. It gives you two balanced signal runs in a single cable, which keeps things tidy when you're linking a mixer to active speakers or connecting stereo sources across a stage or studio. The connectors are die-cast and machine-soldered, so the joints hold up well to repeated plugging and coiling.\u003c\/p\u003e\n\u003cp\u003eThe cable itself uses twinned high-grade construction with a diameter of 5mm per core (5 x 10mm overall). Inside, each conductor is made from 12 strands of 0.1mm pure copper, with cotton reinforcement to help the lead cope with the bending and pulling it gets in regular use. A soft-grip, rubberised jacket keeps the two runs from tangling and makes the cable comfortable to handle when you're setting up in a hurry.\u003c\/p\u003e\n\u003cp\u003eWiring follows the standard balanced pin-out: pin 1 to ground, pin 2 hot and pin 3 cold. That means it works with any balanced audio gear expecting the usual XLR configuration, and the shielding helps reject hum and interference over the length of the run. Whether you call it a lead or a cable, this is a dependable link for PA rigs, recording setups and live sound where two channels need to travel together. The 3 metre length suits most short to medium runs between nearby equipment.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x female XLR, 2 x male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin-out\u003c\/td\u003e\n\u003ctd\u003eBalanced: 1-Ground, 2-Hot, 3-Cold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is this XLR lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable is 3 metres long, which suits short to medium runs between a mixer and speakers or between stereo sources.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many channels does it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt carries two balanced channels, with two female XLR connectors at one end and two male XLR connectors at the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a balanced cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It's wired to the standard balanced pin-out: pin 1 ground, pin 2 hot and pin 3 cold, which helps reject hum and interference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the conductors made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach conductor uses 12 strands of 0.1mm pure copper, with cotton reinforcement to help the lead handle regular bending and coiling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses die-cast XLR connectors with machine-soldered connections, two female and two male in total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I use this cable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's a good fit for PA systems, live sound and recording setups where two balanced channels need to run together, such as a mixer to active speakers.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272069734667,"sku":"190.030UK","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190030UK_0.jpg?v=1785031402"},{"product_id":"citronic-2xf-2xm600-twin-xlr-audio-lead-6-0m","title":"Citronic 2XF-2XM600 Twin XLR Audio Lead 6.0m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead gives you two balanced signal paths in one cable, with two female XLR connectors at one end and two male XLR connectors at the other. It runs 6.0 metres, which suits stereo runs between mixers, amplifiers and active speakers where you want to keep your cabling tidy rather than trailing two separate leads. The die-cast XLR connectors are pro quality and machine-soldered, so the joints stay solid through repeated setups and pack-downs.\u003c\/p\u003e\n\u003cp\u003eThe build uses twinned high-grade cable with pure copper conductors, each made up of 12 strands at 0.1mm diameter. Cotton reinforcement runs through the core to help the lead cope with bending and handling, and the outer jacket is a soft-grip, rubberised finish that resists tangling. The twin cable measures 5mm in diameter per core, presented as a flat 5 x 10mm profile that lies neatly on stage floors and desks. Shielding across both signal lines helps keep interference out, which matters over longer stereo runs.\u003c\/p\u003e\n\u003cp\u003eWiring follows the standard balanced pin-out: pin 1 ground, pin 2 hot and pin 3 cold. That means the lead works as a straightforward balanced interconnect for most professional and semi-pro audio gear, carrying clean signal with good rejection of noise. Note that XLR here refers to the three-pin connector common across microphones and line-level audio; the female end accepts the male output on your source device. With two channels in one length, this is a practical choice for permanent installs and mobile rigs alike.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e6.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x female XLR, 2 x male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin-out\u003c\/td\u003e\n\u003ctd\u003eBalanced: 1-Ground, 2-Hot, 3-Cold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is this cable used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt carries two balanced audio signals at once, so you can link stereo outputs and inputs between mixers, amplifiers and active speakers using a single 6.0m lead rather than two separate cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a balanced cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Both signal paths use the standard balanced pin-out of pin 1 ground, pin 2 hot and pin 3 cold, which helps reject noise over longer runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the connectors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo female XLR connectors at one end and two male XLR connectors at the other. All four are die-cast with machine-soldered connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwinned high-grade cable with pure copper conductors, each 12 strands at 0.1mm diameter, plus cotton reinforcement and a soft-grip rubberised outer jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt runs 6.0 metres, giving you enough reach for stereo connections in most stage, studio and install setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it reduce tangling on stage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe rubberised jacket is anti-tangle and the flat 5 x 10mm twin profile lies neatly on floors and desks, so it stays manageable during setup and pack-down.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272069767435,"sku":"190.031UK","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190031UK_0.jpg?v=1785031433"},{"product_id":"citronic-26j-2xm075-dual-jack-to-xlr-audio-lead-0-75m","title":"Citronic 26J-2XM075 Dual Jack to XLR Audio Lead 0.75m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead pairs two 6.3mm mono jack plugs with two male XLR connectors over a 0.75m run. It's built for the kind of signal routing you find in live and studio setups, connecting mixers, DI boxes and outboard gear where you need to split or combine two channels between jack and XLR ends. The 6.3mm jack is often called a quarter-inch jack, and both terms refer to the same connector here.\u003c\/p\u003e\n\u003cp\u003eThe cable itself is a twinned high-grade design, with each conductor made from 12 strands of 0.1mm pure copper. There's cotton reinforcement running through the build and a shielded construction to keep interference at bay, so your signal stays clean across the length of the lead. The overall cable measures 5mm in diameter per core, giving you a solid feel without being stiff or awkward to coil.\u003c\/p\u003e\n\u003cp\u003eThe connectors are die-cast rather than moulded plastic, and the soldered joints are machine-made for consistency. The jacket is a soft-grip rubberised finish that resists tangling, which helps when you're packing down after a session or reaching into a crowded rack. At 0.75m this is a short lead, well suited to patching between units sitting close together rather than long cable runs across a stage.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e0.75m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x 6.3mm mono jack plug, 2 x male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has two 6.3mm mono jack plugs on one end and two male XLR connectors on the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead measures 0.75m, making it a short patch lead for close connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach conductor uses 12 strands of 0.1mm pure copper, with cotton reinforcement and a shielded build.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the 6.3mm jack the same as a quarter-inch jack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. 6.3mm jack and quarter-inch jack are two names for the same connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the connectors durable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe XLR and jack connectors are die-cast with machine-soldered connections for reliable performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is this lead used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt suits patching two channels between jack and XLR gear, such as mixers, DI boxes and outboard units.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272069800203,"sku":"190.033UK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190033UK_0.jpg?v=1785031461"},{"product_id":"citronic-26j-2xm150-dual-jack-to-xlr-male-audio-lead-1-5m","title":"Citronic 26J-2XM150 Dual Jack to XLR Male Audio Lead 1.5m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead pairs two 6.3mm mono jack plugs with two male XLR connectors, giving you a tidy way to link mixers, stage boxes and other gear over a 1.5m run. The 6.3mm jack is the standard quarter-inch connector you'll find on most instruments and audio equipment, while the XLR (sometimes called a Cannon connector) handles balanced signal duties at the other end. It's a practical choice for both studio and live setups where you need to bridge two different connector types.\u003c\/p\u003e\n\u003cp\u003eThe cable is built for regular use. It carries pure copper conductors with cotton reinforcement inside a twinned high-grade construction, and the die-cast XLR connectors are made to hold up to repeated plugging and unplugging. Connections are machine-soldered for consistency, and the shielded design helps keep unwanted noise out of your signal path. The result is a lead that gives you clear, reliable sound whether you're recording or performing.\u003c\/p\u003e\n\u003cp\u003eThe outer jacket is a soft-grip, rubberised sleeve designed to resist tangles and coil neatly when you pack down. Each cable measures 5mm in diameter as a twin run (5 x 10mm overall), so it's substantial without being stiff or awkward to route. The conductors are made from 2 x 12 strand 0.1mm pure copper, which supports the durability and sound quality Citronic aims for across this range. At 1.5m it suits shorter connections between nearby units.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x 6.3mm mono jack plug, 2 x male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has two 6.3mm mono jack plugs on one end and two male XLR connectors on the other, making it a dual-channel lead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 1.5m long, which suits connections between units placed close together in a studio or on stage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it's a shielded audio lead designed to help keep noise and interference out of your signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the conductors made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe conductors are 2 x 12 strand 0.1mm pure copper with cotton reinforcement for durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the 6.3mm jack the same as a quarter-inch jack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, 6.3mm and quarter-inch refer to the same connector, so it fits standard audio and instrument sockets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this for both studio and live work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the pro quality die-cast connectors and shielded cable make it suitable for both recording and live use.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272069832971,"sku":"190.034UK","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190034UK_0.jpg?v=1785031489"},{"product_id":"citronic-26j-2xm300-twin-jack-to-xlr-male-audio-lead-3m","title":"Citronic 26J-2XM300 Twin Jack to XLR Male Audio Lead 3m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead connects two 6.3mm mono jack plugs to two male XLR connectors over a 3 metre run. It's built for the kind of routing work you meet on stage and in the studio, taking a pair of jack outputs from a mixer or instrument through to XLR inputs on powered speakers, amplifiers or a further mixer. The 6.3mm jack is often called a quarter-inch jack, and both terms refer to the same plug here.\u003c\/p\u003e\n\u003cp\u003eThe cable itself is a twin type, 5mm in diameter with each core measuring 5 x 10mm. Inside, the conductors are 2 x 12 strand, 0.1mm pure copper, which keeps signal loss down over the length of the run. The XLR connectors are die-cast for strength, and every connection is machine-soldered for consistency. Cotton reinforcement runs through the cable, and the outer jacket is a soft-grip rubberised finish that resists tangling and holds up to repeated coiling and packing.\u003c\/p\u003e\n\u003cp\u003eShielding helps keep interference out, which matters when you're running balanced XLR alongside other signal and mains cabling. The result is a reliable lead you can leave in a rig or throw in a gig bag without worrying about it. At 3 metres it suits most short to mid-length runs between a mixer and nearby equipment. If you need a different length or connector layout, we stock other leads across the Citronic range.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x 6.3mm mono jack plug, 2 x male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does this lead connect?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt connects two 6.3mm mono jack plugs to two male XLR connectors, making it useful for linking a mixer or instrument outputs to XLR inputs on speakers or amplifiers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 3 metres long, which suits most short to mid-length runs between nearby equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It's a shielded lead, which helps keep interference out when running alongside other signal and mains cabling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the conductors made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach core uses 2 x 12 strand, 0.1mm pure copper conductors to keep signal loss low over the run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a 6.3mm jack the same as a quarter-inch jack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. A 6.3mm jack and a quarter-inch jack are the same plug, just named differently in metric and imperial terms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the connectors soldered by hand?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connections are machine-soldered for consistency, and the XLR connectors are die-cast for strength.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272069898507,"sku":"190.035UK","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190035UK_0.jpg?v=1785031519"},{"product_id":"citronic-26j-2xm600-twin-jack-to-xlr-male-audio-lead-6m","title":"Citronic 26J-2XM600 Twin Jack to XLR Male Audio Lead 6m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead carries two channels from 6.3mm mono jack plugs to two male XLR connectors over a 6 metre run. It is built for reliable signal handling in live and studio setups, whether you are linking a mixer to powered speakers or connecting other balanced and unbalanced gear. The twin cable design keeps both channels together in a single, tidy run.\u003c\/p\u003e\n\u003cp\u003eThe cable uses pure copper conductors, with each side made up of 12 strands at 0.1mm diameter, and cotton reinforcement for added strength. The outer jacket is a soft-grip, rubberised finish that resists tangling and stays flexible in use. Shielding helps keep interference out of your signal path, and the machine-soldered connections give consistent joints at both ends. The twin cable measures 5mm in diameter per core, sitting in a 5 x 10mm profile.\u003c\/p\u003e\n\u003cp\u003eBoth ends are fitted with die-cast connectors: 6.3mm mono jack plugs (also called 1\/4-inch jacks) on one side and male XLR on the other. The metal housings hold up to repeated plugging and unplugging on the road or in the rack. At 6 metres, this lead gives you room to route cables around a stage or workspace without pulling gear out of place. It is a straightforward, hard-wearing choice for everyday audio connections.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e6.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x 6.3mm mono jack plug, 2 x male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has two 6.3mm mono jack plugs on one end and two male XLR connectors on the other, giving you a twin-channel run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 6 metres long, which suits most stage and studio routing needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the 6.3mm jack the same as a 1\/4-inch jack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 6.3mm jack is the same connector often called a 1\/4-inch jack, so it fits standard mono jack sockets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the conductors made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach side uses pure copper conductors made up of 12 strands at 0.1mm diameter, with cotton reinforcement for strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it is a shielded lead, which helps keep interference out of your audio signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the outer jacket like?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a soft-grip, rubberised jacket that resists tangling and stays flexible during use.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272069931275,"sku":"190.036UK","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190036UK_0.jpg?v=1785031546"},{"product_id":"citronic-26j-2xf075-twin-xlr-to-jack-audio-lead-0-75m","title":"Citronic 26J-2XF075 Twin XLR to Jack Audio Lead 0.75m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead pairs two female XLR connectors with two 6.3mm mono jack plugs, giving you a straightforward way to link balanced and unbalanced gear over a short 0.75m run. The cable is shielded to keep interference down, and the die-cast XLR connectors are built to hold up to regular use around a studio or on stage.\u003c\/p\u003e\n\u003cp\u003eThe lead uses twinned high-grade cable with pure copper conductors and cotton reinforcement for strength. Each core carries 12 strands at 0.1mm diameter, and the twin cable measures 5mm across (5 x 10mm overall). Connections are machine-soldered, which helps keep the joints consistent and reliable across both ends of the lead.\u003c\/p\u003e\n\u003cp\u003eThe outer jacket is a soft-grip, rubberised material that resists tangling and sits comfortably in the hand when you are coiling or routing cables. On a 6.3mm mono jack you get a clear, dependable signal path, making this a practical choice for connecting mixers, DI boxes and other equipment where a compact length is all you need.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e0.75m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x female XLR, 2 x 6.3mm mono jack plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has two female XLR connectors on one end and two 6.3mm mono jack plugs on the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 0.75m long, suited to short connections between nearby equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwinned high-grade cable with pure copper conductors, cotton reinforcement and a rubberised outer jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it is shielded to help reduce interference and keep the signal clean.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a 6.3mm mono jack the same as a 1\/4-inch jack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the 6.3mm mono jack is the same connector referred to as a 1\/4-inch jack in the US.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272069964043,"sku":"190.038UK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190038UK_0.jpg?v=1785031571"},{"product_id":"citronic-26j-2xf150-twin-xlr-to-jack-audio-lead-1-5m","title":"Citronic 26J-2XF150 Twin XLR to Jack Audio Lead 1.5m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead carries two channels between XLR female connectors and 6.3mm (1\/4 inch) mono jack plugs. It measures 1.5 metres, which suits short runs between mixers, powered speakers, and other studio or stage gear where you need to keep the signal path tidy. The twinned design keeps both channels together in a single cable, so it is easy to route and store.\u003c\/p\u003e\n\u003cp\u003eThe cable is built with pure copper conductors, using 2 x 12 strand at 0.1mm diameter per core, along with cotton reinforcement for added strength. Each core sits within a twin 5mm diameter jacket (5 x 10mm overall), and the shielding helps keep interference out of your audio. The outer jacket is soft-grip and rubberised, which cuts down on tangling and makes the lead comfortable to handle during setup and pack-down.\u003c\/p\u003e\n\u003cp\u003eThe connectors are die-cast XLR female fittings paired with 6.3mm mono jack plugs, and the connections are machine-soldered for consistent, reliable joints. This build is aimed at regular use, whether you are wiring up a fixed install or moving kit between venues. If you need a dependable lead for balanced-to-jack conversion at a fixed length, this one covers the basics well and holds up to repeated handling.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x female XLR, 2 x 6.3mm mono jack plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is this Citronic lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is 1.5 metres long, which works well for short connections between nearby equipment such as a mixer and powered speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has two female XLR connectors at one end and two 6.3mm mono jack plugs (also called 1\/4 inch jacks) at the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the jack plugs mono or stereo?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThey are 6.3mm mono jack plugs, so each carries a single channel. With two of them, the lead handles two channels in total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe conductors are pure copper, using 2 x 12 strand at 0.1mm diameter, with cotton reinforcement and a rubberised, soft-grip outer jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the lead is shielded to help keep interference out of the signal, which matters when running audio near power or lighting cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow are the connectors attached?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connections are machine-soldered to die-cast XLR female connectors and 6.3mm mono jack plugs for reliable joints.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272069996811,"sku":"190.039UK","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190039UK_0.jpg?v=1785031602"},{"product_id":"citronic-26j-2xf300-twin-xlr-to-jack-audio-lead-3m","title":"Citronic 26J-2XF300 Twin XLR to Jack Audio Lead 3m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead pairs two female XLR connectors with two 6.3mm mono jack plugs, giving you a twinned run for stereo or dual-mono connections over a 3.0m length. It suits mixers, amplifiers, active speakers and any setup where you need to link balanced XLR outputs to jack inputs, or the reverse. The 6.3mm mono jack is also known as a quarter-inch plug, so the same lead works across a lot of common studio and live gear.\u003c\/p\u003e\n\u003cp\u003eThe build is aimed at regular use. Each XLR connector is die-cast for strength, and the connections are machine-soldered for consistency. The cable itself is twin 5mm diameter, made with pure copper conductors and cotton reinforcement to help it hold up under repeated coiling and travel. Shielding keeps interference down, so you get clean sound whether the lead is running near power cables or across a busy stage.\u003c\/p\u003e\n\u003cp\u003eThe outer jacket is a soft-grip, rubberised finish designed to resist tangling, which makes packing down and setting up quicker. With 12-strand 0.1mm copper conductors in each core, the lead is flexible without feeling flimsy. It is a straightforward, reliable choice for permanent installs and mobile rigs alike, and the 3.0m length gives enough reach for most desk-to-rack or speaker connections without excess cable to manage.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x female XLR, 2 x 6.3mm mono jack plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has two female XLR connectors on one end and two 6.3mm mono jack plugs on the other. The 6.3mm jack is also called a quarter-inch plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 3.0m long, which suits most desk-to-rack and speaker connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it is a shielded audio lead, which helps reject interference and keep your signal clean.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the conductors made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach core uses 2 x 12-strand, 0.1mm diameter pure copper conductors, with cotton reinforcement for durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this to connect a mixer to active speakers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The twinned design lets you link balanced XLR outputs to jack inputs, or the reverse, across mixers, amplifiers and active speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the connectors soldered?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the connections are machine-soldered for consistency, and the XLR connectors are die-cast for strength.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070029579,"sku":"190.040UK","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190040UK_0.jpg?v=1785031630"},{"product_id":"citronic-26j-2xf600-dual-xlr-to-jack-audio-lead-6m","title":"Citronic 26J-2XF600 Dual XLR to Jack Audio Lead 6m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead carries two channels over a 6-metre run, with two female XLR connectors on one end and two 6.3mm mono jack plugs on the other. It suits stereo or dual-mono connections between mixers, amplifiers and stage equipment, giving you a tidy twin cable rather than two loose leads. The rubberised jacket is soft to grip and resists tangling when you coil and store it between jobs.\u003c\/p\u003e\n\u003cp\u003eThe cable itself uses twinned high-grade construction, measuring 5mm across each core (5 x 10mm overall). Inside you get pure copper conductors, each made from 12 strands of 0.1mm wire, with cotton reinforcement for added strength. Shielding helps keep interference out of the signal, so the lead holds up well in busy setups with plenty of other equipment running nearby.\u003c\/p\u003e\n\u003cp\u003eConnections are handled by die-cast XLR female connectors and 6.3mm mono jack plugs. Each joint is machine-soldered for a consistent bond that stands up to regular use and repeated plugging. It is a practical choice for live sound, studio work and permanent installs where you want reliable connections and clear audio without fuss. The 6-metre length gives you room to route the cable neatly across a stage or rack.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e6.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x female XLR, 2 x 6.3mm mono jack plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has two female XLR connectors on one end and two 6.3mm mono jack plugs on the other, making it a dual-channel lead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 6 metres long, giving you room to route it across a stage or between rack-mounted gear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It is a shielded audio lead, which helps keep interference out of the signal in busy setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the conductors made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach conductor uses pure copper, made up of 12 strands of 0.1mm wire, with cotton reinforcement for added strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this for stereo connections?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. With two channels it works for stereo or dual-mono links between mixers, amplifiers and other equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the connectors soldered?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connections are machine-soldered, which gives a consistent bond that copes with regular plugging and unplugging.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070062347,"sku":"190.041UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190041UK_0.jpg?v=1785031657"},{"product_id":"citronic-m6j-xm150-6-3mm-mono-jack-to-xlr-male-lead-1-5m","title":"Citronic M6J-XM150 6.3mm Mono Jack to XLR Male Lead 1.5m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead connects a 6.3mm mono jack plug to a male XLR connector over a 1.5m run. The 6.3mm plug is often called a quarter-inch jack, and both ends use die-cast bodies for a solid, long-lasting fit. It's a straightforward cable for linking mixers, DI boxes, instruments and other gear where you need to move between jack and XLR connections.\u003c\/p\u003e\n\u003cp\u003eThe cable measures 6mm in diameter and carries a 15-strand 0.1mm pure copper conductor, which keeps the signal clean and the resistance low. Cotton reinforcement runs through the build to add strength, while the rubberised jacket has a soft-grip, anti-tangle finish that stays flexible in use and packs away neatly. The shielding helps cut down interference, so you get steady sound in busy setups.\u003c\/p\u003e\n\u003cp\u003eConnections are machine-soldered for consistency, which means fewer weak points and reliable performance gig after gig. At 1.5m the lead suits short runs on stage, in the studio or around a rack, where a longer cable would just get in the way. It's a practical, hard-wearing choice for anyone who needs a dependable jack-to-XLR link without any fuss.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003e15 strand 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e6.3mm mono jack plug, male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne end has a 6.3mm mono jack plug (also called a quarter-inch jack) and the other has a male XLR connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 1.5m long, which suits short runs between gear on stage, in a studio or around a rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses a 15-strand 0.1mm pure copper conductor with cotton reinforcement and a rubberised, anti-tangle jacket. The cable is 6mm in diameter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the lead shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it has shielding to help reduce interference and keep the signal clean during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the connections soldered?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the connections are machine-soldered for consistent, reliable performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I use this lead for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's handy for connecting mixers, DI boxes, instruments and other equipment where you need to bridge a 6.3mm jack and a male XLR.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070095115,"sku":"190.043UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190043UK_0.jpg?v=1785031684"},{"product_id":"citronic-m6j-xm300-6-3mm-mono-jack-to-xlr-male-lead-3m","title":"Citronic M6J-XM300 6.3mm Mono Jack to XLR Male Lead 3m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead connects a 6.3mm mono jack plug to a male XLR connector over a 3 metre run. It is built for regular use, with a die-cast jack plug and shielded cable that helps keep interference out of the signal. The 6.3mm jack is often called a quarter-inch jack, so if you have seen either term they refer to the same connector.\u003c\/p\u003e\n\u003cp\u003eThe cable measures 6mm in diameter and uses pure copper conductors made from 15 strands of 0.1mm wire, which keeps the signal clean and the lead flexible. Cotton reinforcement runs through the cable to add strength, while the soft-grip rubberised jacket resists tangling and holds up to repeated coiling and packing away. The connections are machine-soldered for consistent joints that stay reliable in day to day work.\u003c\/p\u003e\n\u003cp\u003eA mono jack to XLR lead like this is handy for linking instruments, mixers and PA gear where you need to move between the two connector types. The male XLR end plugs into a female XLR input, and the 3 metre length gives you room to route the cable neatly without excess slack. It suits both fixed setups and mobile use where kit gets moved and rigged often.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003e15 strand 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e6.3mm mono jack plug, male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a 6.3mm mono jack plug on one end and a male XLR connector on the other. The male XLR plugs into a female XLR socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 3 metres long, which gives you enough reach for most instrument and PA connections without too much slack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The lead is shielded to help reduce interference and keep the audio signal clean during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses pure copper conductors with 15 strands of 0.1mm wire, cotton reinforcement for strength, and a rubberised anti-tangle jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a 6.3mm jack the same as a quarter-inch jack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I use this lead for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt suits connecting instruments, mixers and PA equipment where you need to bridge a 6.3mm jack and a male XLR connection.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070127883,"sku":"190.044UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190044UK_0.jpg?v=1785031710"},{"product_id":"citronic-m6j-xm600-6-3mm-jack-to-xlr-male-audio-lead-6m","title":"Citronic M6J-XM600 6.3mm Jack to XLR Male Audio Lead 6m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead connects a 6.3mm mono jack plug to a male XLR connector, giving you a reliable link between mixers, amplifiers and other pro audio gear. It runs to a full 6 metres, so you have plenty of length for stage, studio or fixed installations. The 6.3mm plug is sometimes called a quarter-inch jack, and it uses a die-cast body for a solid, long-lasting connection.\u003c\/p\u003e\n\u003cp\u003eThe cable itself is built for regular use. Inside you get 15-strand 0.1mm pure copper conductors for clean signal transfer, wrapped in cotton reinforcement to help the lead hold up under repeated coiling and movement. The 6mm outer jacket is a soft-grip, rubberised finish that resists tangles and sits comfortably in the hand when you are patching gear or packing down after a set.\u003c\/p\u003e\n\u003cp\u003eConnections are machine-soldered for consistency, and the shielded design helps keep interference and noise out of your signal path. With a jack at one end and a male XLR at the other, this lead suits balanced and unbalanced setups where you need to bridge these two connector types. It is a practical choice for musicians, sound engineers and venues that want a dependable cable without any fuss.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e6.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003e15 strand 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e6.3mm mono jack plug, male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a 6.3mm mono jack plug (also called a quarter-inch jack) at one end and a male XLR connector at the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead measures 6 metres, which gives you good reach for stage, studio or installed setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the conductors made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable uses 15-strand 0.1mm pure copper conductors, with cotton reinforcement for added durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it has a shielded design that helps reduce interference and keep your signal clean.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the outer jacket like?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a 6mm soft-grip, rubberised jacket that resists tangles and is comfortable to handle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the connections soldered?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the connections are machine-soldered for consistent, reliable performance.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070160651,"sku":"190.045UK","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190045UK_0.jpg?v=1785031735"},{"product_id":"citronic-m6j-xm1200-6-3mm-mono-jack-to-xlr-male-lead-12m","title":"Citronic M6J-XM1200 6.3mm Mono Jack to XLR Male Lead 12m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead connects a 6.3mm mono jack plug to a male XLR connector over a 12 metre run, giving you a reliable link between mixers, stage boxes, amplifiers and other pro audio gear. The 6.3mm jack is often called a quarter-inch jack, and it uses a die-cast body for a solid, hard-wearing connection at both ends.\u003c\/p\u003e\n\u003cp\u003eThe cable itself measures 6mm in diameter and carries pure copper conductors, using 15 strands of 0.1mm wire for clean signal flow. Cotton reinforcement runs through the cable to add strength, while the shielding helps keep interference out of your signal path. Connections are machine-soldered, which keeps them consistent along the full length.\u003c\/p\u003e\n\u003cp\u003eThe outer jacket is a soft-grip, rubberised finish that resists tangling, so the lead coils away neatly and lies flat when you run it across a stage or studio floor. At 12 metres it suits longer cable runs where you need to reach across a room without joining shorter leads together. It works well for live setups, rehearsal spaces and permanent installs where you want a dependable, well-built connection you can rely on night after night.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e12.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003e15 strand 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e6.3mm mono jack plug, male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a 6.3mm mono jack plug on one end and a male XLR connector on the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 12 metres long, suited to longer runs across a stage or room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses pure copper conductors with 15 strands of 0.1mm wire, plus cotton reinforcement for added strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a 6.3mm jack the same as a quarter-inch jack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, 6.3mm and quarter-inch refer to the same jack size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the jacket resist tangling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the soft-grip rubberised jacket is designed to be anti-tangle and coils away neatly.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070193419,"sku":"190.047UK","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190047UK_0.jpg?v=1785031759"},{"product_id":"citronic-s6j-xm150-balanced-6-3mm-trs-jack-to-xlr-lead","title":"Citronic S6J-XM150 Balanced 6.3mm TRS Jack to XLR Lead","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic S6J-XM150 is a 1.5m balanced audio lead with a 6.3mm stereo TRS jack plug on one end and a male XLR connector on the other. It carries a balanced signal for cleaner runs over longer distances, wiring pin 1 to sleeve, pin 2 to tip and pin 3 to ring. This makes it a straightforward choice for connecting mixers, audio interfaces and active speakers where you need a jack-to-XLR link.\u003c\/p\u003e\n\u003cp\u003eBoth connectors are die-cast for durability, and the cable itself uses two runs of 20-strand, 0.1mm pure copper conductors for good conductivity and low loss. The 6mm diameter cable is shielded to help keep interference out of the signal, with cotton reinforcement adding strength inside the jacket. The connections are machine-soldered for consistency across the build.\u003c\/p\u003e\n\u003cp\u003eThe outer jacket is a soft-grip, rubberised material that resists tangling and coils away neatly between uses. At 1.5m the lead suits shorter stage and studio runs, patching between nearby gear without leaving too much slack. This is the familiar 6.3mm plug you will find on most pro audio equipment.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 20strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e6.3mm TRS jack plug, male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin-out\u003c\/td\u003e\n\u003ctd\u003eBalanced: 1-Sleeve, 2-Tip, 3-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this lead balanced or unbalanced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is balanced. The TRS jack carries the signal across tip, ring and sleeve, wired to the XLR as 1-sleeve, 2-tip, 3-ring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 1.5m long, which suits shorter runs between nearby gear on stage or in the studio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I connect with it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt links a 6.3mm TRS jack output to a male XLR input, so it works between mixers, audio interfaces and active speakers, among other equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs 6.3mm the same as a quarter-inch jack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the conductors made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach conductor is 20-strand, 0.1mm pure copper, giving good conductivity and low signal loss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the connectors durable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth the TRS jack and XLR connectors are die-cast, and the connections are machine-soldered for consistency.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070226187,"sku":"190.048UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190048UK_0.jpg?v=1785031785"},{"product_id":"citronic-s6j-xm300-balanced-trs-jack-to-xlr-male-lead-3m","title":"Citronic S6J-XM300 Balanced TRS Jack to XLR Male Lead 3m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead connects a 6.3mm stereo TRS jack plug to a male XLR connector, giving you a balanced signal path over a 3.0m run. It's built for reliable use in studios, on stage and around the home, with die-cast pro-quality connectors on each end. The balanced wiring keeps interference down over longer cable runs, which helps maintain a clean signal.\u003c\/p\u003e\n\u003cp\u003eThe cable itself measures 6mm in diameter and uses two pure copper conductors, each made from 20 strands of 0.1mm wire. Cotton reinforcement adds strength inside, while the shielded construction guards against noise pickup. Connections are machine-soldered, and the pin-out follows the balanced standard: pin 1 to sleeve, pin 2 to tip and pin 3 to ring.\u003c\/p\u003e\n\u003cp\u003eThe outer jacket is a soft-grip, rubberised finish that resists tangling and stays flexible when you coil it away. This 6.3mm jack carries both left and right contacts as a TRS (tip-ring-sleeve) plug. Whether you're linking a mixer to a powered speaker or a balanced output to a stage box, this lead is a practical, hard-wearing choice at a sensible length.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 20strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e6.3mm TRS jack plug, male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin-out\u003c\/td\u003e\n\u003ctd\u003eBalanced: 1-Sleeve, 2-Tip, 3-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a 6.3mm stereo TRS jack plug on one end and a male XLR connector on the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a balanced cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It's wired for balanced signals with pin 1 to sleeve, pin 2 to tip and pin 3 to ring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable length is 3.0m, useful for stage and studio runs where a bit of reach helps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo pure copper conductors of 20 strands at 0.1mm each, with cotton reinforcement and a shielded, rubberised outer jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable diameter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable measures 6mm in diameter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the connections soldered?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the connections are machine-soldered for consistent, reliable contact.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070258955,"sku":"190.049UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190049UK_0.jpg?v=1785031810"},{"product_id":"citronic-s6j-xm600-balanced-trs-jack-to-xlr-male-cable-6m","title":"Citronic S6J-XM600 Balanced TRS Jack to XLR Male Cable 6m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic S6J-XM600 is a shielded audio lead built to carry a balanced signal between a 6.3mm stereo TRS jack plug (also called a 1\/4-inch jack) and a male XLR connector. It runs to 6 metres, which suits stage and studio setups where you need to route audio across a reasonable distance without stretching or strain. The connectors are die-cast for a solid feel and dependable long-term use.\u003c\/p\u003e\n\u003cp\u003eInside, the cable uses pure copper conductors, with two runs of 20-strand 0.1mm wire, plus cotton reinforcement to help the lead hold up to repeated coiling and handling. The outer jacket is a soft-grip, rubberised, anti-tangle design measuring 6mm in diameter, so it stays flexible and easy to pack away. Connections are machine-soldered for consistency across the join, and the shielding helps keep interference out of your signal.\u003c\/p\u003e\n\u003cp\u003eThe pin-out follows a standard balanced wiring scheme: sleeve to pin 1, tip to pin 2, and ring to pin 3. That makes it a straightforward choice for connecting balanced sources such as a mixer output or DI box to an XLR input. If you work with live sound, recording, or fixed installs, this lead gives you a reliable connection with clean audio and hardware that stands up to regular use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e6.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 20strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e6.3mm TRS jack plug, male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin-out\u003c\/td\u003e\n\u003ctd\u003eBalanced: 1-Sleeve, 2-Tip, 3-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a balanced cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It uses a stereo TRS jack and a three-pin XLR, wired for a balanced signal with sleeve to pin 1, tip to pin 2, and ring to pin 3.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size jack does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses a 6.3mm stereo TRS jack plug, also known as a 1\/4-inch jack, at one end, with a male XLR connector at the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis version is 6 metres long, giving you enough reach for most stage and studio routing without excess slack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has pure copper conductors, two runs of 20-strand 0.1mm wire, cotton reinforcement, and a soft-grip rubberised jacket that resists tangling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I connect it to?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt suits balanced connections such as a mixer or DI box output with a TRS jack going into an XLR input on a device or amplifier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the connectors soldered by hand?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connections are machine-soldered, which gives a consistent join across the die-cast connectors.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070291723,"sku":"190.050UK","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190050UK_0.jpg?v=1785031838"},{"product_id":"citronic-s6j-xm1200-6-3mm-trs-jack-to-xlr-male-cable-12m","title":"Citronic S6J-XM1200 6.3mm TRS Jack to XLR Male Cable 12m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic S6J-XM1200 is a 12 metre balanced audio lead with a 6.3mm stereo TRS jack plug at one end and a male XLR connector at the other. It suits balanced connections between mixers, active speakers, DI boxes and other pro audio gear, where the extra length gives you room to route cable around a stage or studio without pulling anything tight.\u003c\/p\u003e\n\u003cp\u003eBoth connectors are die-cast for durability, with machine-soldered connections for consistent contact. Inside, the cable uses two conductors of 20-strand 0.1mm pure copper, plus cotton reinforcement and full shielding to keep interference out over the run. The pin-out follows the standard balanced layout: pin 1 to sleeve, pin 2 to tip and pin 3 to ring, so it works straight away with balanced equipment.\u003c\/p\u003e\n\u003cp\u003eThe outer jacket is a soft-grip, rubberised material that resists tangling and coils back easily for storage. At 6mm in diameter the cable stays flexible enough to handle without feeling flimsy, and it holds up to repeated setup and pack-down. If you need a reliable balanced lead for regular use on gigs or in a fixed install, this is a straightforward choice.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e12.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 20strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e6.3mm TRS jack plug, male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin-out\u003c\/td\u003e\n\u003ctd\u003eBalanced: 1-Sleeve, 2-Tip, 3-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this cable balanced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 6.3mm connector is a TRS (tip-ring-sleeve) jack, and with the male XLR it carries a balanced signal. The pin-out is 1-sleeve, 2-tip, 3-ring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length is the lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is 12 metres long, which gives plenty of reach for stage or studio routing without running the cable taut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the connectors made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth the 6.3mm TRS jack and the XLR are die-cast, with machine-soldered connections for reliable contact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is inside the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo conductors of 20-strand 0.1mm pure copper, with cotton reinforcement and shielding to reduce interference over the length of the run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I connect it to?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse it for balanced links between mixers, active speakers, DI boxes and other pro audio equipment fitted with TRS jack and XLR inputs or outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow thick is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe outer diameter is 6mm, with a soft-grip rubberised jacket that resists tangling and coils away neatly.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070324491,"sku":"190.051UK","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190051UK_0.jpg?v=1785031866"},{"product_id":"citronic-2r-2xm075-twin-rca-to-xlr-male-audio-lead-0-75m","title":"Citronic 2R-2XM075 Twin RCA to XLR Male Audio Lead 0.75m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead connects two RCA phono plugs to two male XLR connectors over a 0.75m length. It's built for pro use, with die-cast XLR connectors and shielded twin cable that keeps interference down and signal clean. RCA plugs are also known as phono plugs, and you'll find them on plenty of mixers, players and audio gear.\u003c\/p\u003e\n\u003cp\u003eThe cable itself uses pure copper conductors, 12 strands at 0.1mm each, with cotton reinforcement for added strength. The twin 5mm diameter jacket is soft-grip and rubberised, which helps stop tangles and makes the lead easy to route behind a rack or desk. Connections are machine-soldered for consistency and reliability across the run.\u003c\/p\u003e\n\u003cp\u003eWe think this is a solid choice for linking unbalanced RCA outputs to XLR inputs on mixing desks, amplifiers and recording gear. At 0.75m it suits short patch runs where you want a tidy, dependable link without excess slack. The die-cast connector housings give it a bit more durability than moulded plastic alternatives, so it holds up to regular plugging and unplugging.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e0.75m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x RCA phono plug, 2 x male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length is this lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable is 0.75m long, which suits short patch runs between nearby equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has two RCA phono plugs at one end and two male XLR connectors at the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre RCA and phono plugs the same thing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. RCA plugs are also called phono plugs, and this lead uses two of them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses pure copper conductors, 12 strands at 0.1mm each, with cotton reinforcement and a rubberised jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it's a shielded twin cable, which helps reduce interference on the signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is this lead used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt links unbalanced RCA outputs to XLR inputs on mixers, amplifiers and recording equipment.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070521099,"sku":"190.057UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190057UK_0.jpg?v=1785032033"},{"product_id":"citronic-2r-2xm150-shielded-2-rca-to-2-xlr-male-audio-lead","title":"Citronic 2R-2XM150 Shielded 2 RCA to 2 XLR Male Audio Lead","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead connects two RCA plugs (phono plugs) to two male XLR connectors, giving you a tidy way to link line-level gear to balanced inputs. It measures 1.5m, which suits mixers, amps and active speakers sat close together in a rack or on a desk. The shielded build keeps interference down, so your signal stays clean across the run.\u003c\/p\u003e\n\u003cp\u003eWe've built it with twinned high-grade cable using pure copper conductors and cotton reinforcement for strength. The outer jacket is a soft-grip, rubberised design that resists tangling and holds up to repeated coiling. Connectors are die-cast for a solid feel, and the solder joints are machine-made for consistency, so you get reliable contact every time you plug in.\u003c\/p\u003e\n\u003cp\u003eEach conductor uses 12 strands of 0.1mm pure copper, and the twin cable runs at 5mm diameter (5 x 10mm across the pair). The RCA to XLR layout makes this a practical choice for studio, stage and installed setups where you need to bridge unbalanced RCA sources with balanced XLR inputs. Note that this is a passive lead and does not convert between balanced and unbalanced signals; it simply routes the connections. RCA is sometimes called phono in the UK, and both terms refer to the same plug here.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x RCA phono plug, 2 x male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does this lead connect?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt links two RCA (phono) plugs to two male XLR connectors, so you can run line-level sources into balanced XLR inputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 1.5m long, which suits gear placed close together in a rack or on a desk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it convert unbalanced to balanced signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, it's a passive lead that routes the connections. It does not actively convert between balanced and unbalanced signals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the connectors made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThey're die-cast connectors with machine-soldered connections for a solid, reliable contact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable is used inside?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwinned high-grade cable with 12-strand, 0.1mm pure copper conductors and cotton reinforcement, wrapped in a soft-grip rubberised jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the lead shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it's shielded to help keep interference down and your signal clean across the run.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070553867,"sku":"190.058UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190058UK_0.jpg?v=1785032060"},{"product_id":"citronic-2r-2xm300-twin-rca-to-xlr-male-audio-lead-3m","title":"Citronic 2R-2XM300 Twin RCA to XLR Male Audio Lead 3m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eWe built the Citronic 2R-2XM300 for anyone joining RCA phono outputs to balanced XLR inputs, whether you are wiring a mixer into a PA system or linking studio gear. It gives you two RCA plugs (also called phono connectors) at one end and two male XLR connectors at the other, over a 3.0m run that suits most fixed and mobile setups.\u003c\/p\u003e\n\u003cp\u003eThe cable is twinned high-grade wire with pure copper conductors, 12 strands at 0.1mm each per core, which keeps signal loss low and sound clean. Cotton reinforcement adds strength inside, while the soft-grip, anti-tangle, rubberised jacket makes the lead easy to coil and store. Each core measures 5mm in diameter, sitting side by side in a 5 x 10mm profile.\u003c\/p\u003e\n\u003cp\u003eConnections are machine-soldered to the die-cast XLR male plugs and RCA plugs, so joints stay solid through repeated use. The shielded design helps reject interference, giving reliable performance in busy stage and studio environments. It is a straightforward, hard-wearing lead you can fit and forget, backed by Citronic's Classic Audio range of connection cables.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x RCA phono plug, 2 x male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does this lead connect?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt links two RCA phono plugs to two male XLR connectors, ideal for sending a stereo RCA output to balanced XLR inputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 3.0m long, which suits most desktop, rack and mobile setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the connectors well made?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The XLR ends use die-cast housings and all connections are machine-soldered for a durable, reliable joint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is. The shielded construction helps reject interference for cleaner sound in busy audio environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat conductors are used inside?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach core has 12 strands of 0.1mm pure copper, keeping signal loss low and audio quality high.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the jacket easy to handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The soft-grip, rubberised jacket is anti-tangle, so the lead coils neatly and stores without knotting.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070586635,"sku":"190.059UK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190059UK_0.jpg?v=1785032091"},{"product_id":"citronic-2r-2xm600-twin-rca-to-xlr-male-audio-lead-6m","title":"Citronic 2R-2XM600 Twin RCA to XLR Male Audio Lead 6m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead connects two RCA phono plugs to two male XLR connectors, giving you a tidy way to link source gear to balanced inputs over a 6 metre run. It's built for regular use, with die-cast XLR connectors and machine-soldered connections that hold up well when leads get plugged and unplugged often.\u003c\/p\u003e\n\u003cp\u003eThe cable itself is twinned high-grade wire with pure copper conductors and cotton reinforcement inside. That reinforcement helps the lead cope with flexing and pulling, while the shielding keeps interference down so the signal stays clean. Each core measures 5mm in diameter and carries 12 strands of 0.1mm pure copper, which is a solid spec for this type of run.\u003c\/p\u003e\n\u003cp\u003eThe outer jacket is a soft-grip rubberised finish that resists tangling, so coiling and storing the lead is straightforward. RCA plugs are also known as phono plugs, and the male XLR ends are the standard three-pin type used across audio equipment. If you're running a mixer, interface or amplifier into or out of RCA-fitted gear, this lead does the job without fuss and should give you years of reliable service.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e6.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x RCA phono plug, 2 x male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is this audio lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures 6.0 metres, giving you plenty of reach between equipment without excess cable to manage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne end has two RCA phono plugs and the other has two male XLR connectors. The RCA plugs are also called phono plugs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The lead is shielded to help reduce interference and keep the audio signal clean over the run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the conductors made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach core uses 12 strands of 0.1mm pure copper, with cotton reinforcement inside for added durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the connectors soldered?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The die-cast XLR and RCA connectors use machine-soldered connections for consistent, reliable joints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I use this lead for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt suits linking RCA-fitted sources such as players or mixers to balanced XLR inputs on amplifiers, interfaces and similar gear.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070619403,"sku":"190.060UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190060UK_0.jpg?v=1785032120"},{"product_id":"citronic-2r-2xf075-xlr-female-to-rca-audio-lead-0-75m","title":"Citronic 2R-2XF075 XLR Female to RCA Audio Lead 0.75m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead connects two female XLR connectors to two RCA plugs (known as phono plugs in the UK) over a 0.75m length. It suits a range of studio and stage setups where you need to link balanced XLR sources to RCA inputs, such as mixers, amplifiers and recording gear. The die-cast XLR connectors and machine-soldered connections give you a solid, repeatable join that holds up to regular use.\u003c\/p\u003e\n\u003cp\u003eInside, the twinned cable uses 12-strand, 0.1mm pure copper conductors with cotton reinforcement for added strength. The shielding helps keep interference out, so you get clean sound with minimal noise. The overall cable is a twin 5mm diameter (5 x 10mm), keeping it flexible enough to route neatly around your kit.\u003c\/p\u003e\n\u003cp\u003eThe outer jacket is a soft-grip, rubberised finish that resists tangling and stays easy to coil after a session. At 0.75m it works well for short runs between adjacent units or within a rack, where a longer cable would only add clutter. If you need a dependable XLR female to RCA lead for a fixed install or a portable rig, this one covers the basics without fuss and gives you consistent performance over time.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e0.75m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x female XLR, 2 x RCA phono plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has two female XLR connectors at one end and two RCA phono plugs at the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 0.75m long, which suits short runs between nearby equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the conductors made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable uses 12-strand, 0.1mm pure copper conductors with cotton reinforcement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it is shielded to help reduce interference and keep the audio signal clean.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is an RCA plug called in the UK?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRCA plugs are also known as phono plugs in the UK. Both terms refer to the same connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable diameter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is a twin cable measuring 5mm diameter, giving overall dimensions of 5 x 10mm.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070652171,"sku":"190.061UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190061UK_0.jpg?v=1785032145"},{"product_id":"citronic-2r-2xf150-shielded-2-xlr-to-2-rca-audio-lead","title":"Citronic 2R-2XF150 Shielded 2 XLR to 2 RCA Audio Lead","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead connects two female XLR sockets to two RCA phono plugs over a 1.5m run. It uses twinned high-grade cable with pure copper conductors and cotton reinforcement, so it holds up well to regular use in fixed installs and mobile setups alike. The die-cast connectors are machine-soldered for consistent, reliable joints.\u003c\/p\u003e\n\u003cp\u003eThe cable carries twin 5mm diameter cores, each built from 12 strands of 0.1mm pure copper. Screening runs the full length to keep interference out of the signal, which matters when you are running audio near mains cabling or lighting rigs. The soft-grip, rubberised jacket is designed to resist tangling and stays flexible when you coil it away between jobs.\u003c\/p\u003e\n\u003cp\u003eOn the connector side you get two female XLR ends and two RCA phono plugs, sometimes called RCA jacks in the US. This makes the lead a practical choice for linking balanced outputs to unbalanced RCA inputs on mixers, amps and playback gear. The 1.5m length suits rack work and short desk-to-source runs without leaving excess cable to manage. If you need reliable stereo connectivity from XLR to phono, this is a straightforward option that does the job.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x female XLR, 2 x RCA phono plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo female XLR connectors on one end and two RCA phono plugs on the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 1.5m long, suited to short desk and rack runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it is screened along its full length to help reject interference from nearby mains or lighting cabling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the conductors made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach core uses 12 strands of 0.1mm diameter pure copper, with cotton reinforcement in the cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this to connect balanced outputs to RCA inputs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it links female XLR outputs to unbalanced RCA phono inputs on mixers, amps and playback gear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the connections soldered?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the die-cast connectors use machine-soldered joints for consistent contact.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070684939,"sku":"190.062UK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190062UK_0.jpg?v=1785032172"},{"product_id":"citronic-2r-2xf300-twin-xlr-to-rca-audio-cable-3m","title":"Citronic 2R-2XF300 Twin XLR to RCA Audio Cable 3m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead connects 2 x female XLR sockets to 2 x RCA plugs (known as phono plugs in the UK), giving you a tidy stereo link between balanced and unbalanced gear. It measures 3 metres, so there's enough reach for a mixer, amplifier or interface without leaving cable pooled on the floor. The shielded build keeps interference down, which helps when the lead runs alongside power cables or through a busy rack.\u003c\/p\u003e\n\u003cp\u003eThe cable itself is a twin design at 5mm diameter, made with 12-strand 0.1mm pure copper conductors for steady signal flow. Each core carries cotton reinforcement, so the lead holds up to repeated coiling and general handling. The outer jacket is a soft-grip rubberised finish that resists tangling, making setup and pack-down quicker. Connections are machine-soldered onto die-cast XLR female connectors and RCA plugs, giving reliable joints that stand up to regular use in a studio or on stage.\u003c\/p\u003e\n\u003cp\u003eUse this lead where you need to feed a balanced XLR output into RCA phono inputs, such as linking a mixer to a hi-fi amplifier, a recorder or powered speakers. It suits both fixed installs and mobile rigs where kit gets moved often. With its pure copper cores and solid connectors, it offers dependable sound and a build that lasts. If you run stereo pairs regularly, keeping a spare 3-metre lead on hand saves time when you're setting up in a hurry.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x female XLR, 2 x RCA phono plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is this cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 3 metres long, which gives room to route between gear without excess slack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has 2 x female XLR connectors on one end and 2 x RCA plugs (also called phono plugs) on the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it's a shielded twin cable, which helps reduce interference when running near power leads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the conductors made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach core uses 12-strand 0.1mm pure copper conductors with cotton reinforcement for durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I use this lead for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's suited to connecting balanced XLR outputs to RCA phono inputs, such as a mixer to an amplifier, recorder or powered speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it strong enough for regular gigging?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it uses die-cast connectors, machine-soldered joints and a soft-grip anti-tangle jacket built for frequent handling.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070717707,"sku":"190.063UK","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190063UK_0.jpg?v=1785032201"},{"product_id":"citronic-2r-2xf600-2-xlr-female-to-2-rca-audio-lead-6m","title":"Citronic 2R-2XF600 2 XLR Female to 2 RCA Audio Lead 6m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead connects two female XLR connectors to two RCA plugs (also called phono plugs), giving you a 6 metre run for linking mixers, amplifiers and other gear. The die-cast XLR connectors and moulded RCA plugs are built for regular use, and the machine-soldered connections keep the signal path solid over time. It's a practical choice for studio setups, live sound and installed audio where you need a reliable stereo link.\u003c\/p\u003e\n\u003cp\u003eThe cable itself uses twinned high-grade construction with a twin 5mm diameter jacket measuring 5 x 10mm. Inside, pure copper conductors carry the signal, each made up of 12 strands at 0.1mm diameter, with cotton reinforcement adding strength. The shielding helps keep interference out, so you get clean sound across the full length. The soft-grip, rubberised jacket resists tangling and stays flexible, which makes coiling and storing the lead between jobs straightforward.\u003c\/p\u003e\n\u003cp\u003eAt 6 metres, this lead suits situations where the source and destination sit a fair distance apart, such as connecting a rack to a stage position or spanning a room. The female XLR ends mean you can plug into balanced male outputs, while the RCA plugs feed into standard consumer or semi-pro inputs. If you work with mixed equipment that pairs professional and domestic connectors, this cable bridges the two without needing an adapter. It's a straightforward, dependable option for everyday audio work.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e6.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003eTwin 5mmØ (5 x 10mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e12 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x female XLR, 2 x RCA phono plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is this audio lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 6 metres long, giving you plenty of reach between your source and destination equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has two female XLR connectors on one end and two RCA plugs (also called phono plugs) on the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses twinned high-grade cable with pure copper conductors, each made of 12 strands at 0.1mm diameter, plus cotton reinforcement and shielding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the lead is shielded to help keep interference out and maintain clean sound over the full length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I use this lead for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt suits linking mixers, amplifiers and other audio gear where you need to connect balanced XLR outputs to RCA inputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the jacket resist tangling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the soft-grip rubberised jacket is designed to be anti-tangle and stays flexible for easy coiling and storage.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070750475,"sku":"190.064UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190064UK_0.jpg?v=1785032231"},{"product_id":"citronic-s3j-xm050-3-5mm-trs-jack-to-xlr-male-lead-0-5m","title":"Citronic S3J-XM050 3.5mm TRS Jack to XLR Male Lead 0.5m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic S3J-XM050 is a short balanced audio lead that connects a 3.5mm TRS jack plug to a male XLR connector. At 0.5m it suits tight setups where you need to link a source with a 3.5mm output, such as a laptop, phone or mixer, to gear that takes a male XLR input. The balanced TRS wiring helps keep noise and interference down over the run, which is useful in busy audio environments.\u003c\/p\u003e\n\u003cp\u003eWe have built the lead to hold up to regular use. The male XLR is a pro quality die-cast connector, and the 3.5mm jack is a balanced TRS type. Inside, the 6mm cable carries pure copper conductors with cotton reinforcement, and the connections are machine soldered for consistency. The rubberised jacket is soft to grip and resists tangling, so the lead coils away neatly between jobs.\u003c\/p\u003e\n\u003cp\u003eThe pin-out follows a standard balanced arrangement: 1 to sleeve, 2 to tip and 3 to ring. Each conductor is 20 strands of 0.1mm pure copper, giving a good balance of flexibility and signal quality. This short version keeps things tidy for desktop, stage or studio work where a compact connection is all you need.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 20 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e3.5mm TRS jack plug, male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e0.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin-out\u003c\/td\u003e\n\u003ctd\u003eBalanced: 1-Sleeve, 2-Tip, 3-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this lead balanced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It uses a 3.5mm TRS jack and follows a balanced pin-out of 1-sleeve, 2-tip, 3-ring, which helps reduce noise over the run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is 0.5m, so it suits short connections between nearby equipment rather than longer cable runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne end is a 3.5mm TRS jack plug (also called a mini jack) and the other is a male XLR connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses pure copper conductors, two lots of 20 strands at 0.1mm each, with cotton reinforcement and a rubberised, anti-tangle jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable diameter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable measures 6mm in diameter, giving it a sturdy feel while staying flexible enough to coil.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070783243,"sku":"190.065UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190065UK_0.jpg?v=1785032255"},{"product_id":"citronic-s3j-xf051-xlr-female-to-3-5mm-trs-jack-lead-0-5m","title":"Citronic S3J-XF051 XLR Female to 3.5mm TRS Jack Lead 0.5m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic audio lead connects a female XLR to a 3.5mm balanced TRS jack plug, giving you a short 0.5m link between balanced sources and equipment. It's built for regular use, with a die-cast XLR connector and machine-soldered joints that hold up well over time. The balanced wiring keeps interference low, so signal stays clean across the run.\u003c\/p\u003e\n\u003cp\u003eThe cable measures 6mm in diameter and uses two 20-strand conductors of 0.1mm pure copper, paired with cotton reinforcement for strength. Around the outside sits a soft-grip, rubberised jacket that resists tangling and feels comfortable to handle. Shielding runs the full length to guard against noise pickup, which matters when you're working near power cables or other gear.\u003c\/p\u003e\n\u003cp\u003eWiring follows a balanced pin-out: sleeve to pin 1, tip to pin 2 and ring to pin 3. The 3.5mm jack plug works with laptops, mixers and portable recorders that carry a balanced 3.5mm output or input. At 0.5m this is a handy length for tight setups, patching between nearby units or keeping a desk tidy without excess cable. It's a straightforward, reliable lead for studio, stage or home use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 20 strand, 0.1mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e3.5mm TRS jack plug, female XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e0.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin-out\u003c\/td\u003e\n\u003ctd\u003eBalanced: 1-Sleeve, 2-Tip, 3-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne end has a female XLR connector and the other a 3.5mm balanced TRS jack plug. The 3.5mm jack is sometimes called a mini-jack or 1\/8-inch jack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a balanced cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It's wired for balanced signal with a pin-out of sleeve to pin 1, tip to pin 2 and ring to pin 3, which helps keep interference low.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable is 0.5m long, so it suits short runs, tidy desk setups and patching between nearby equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses two 20-strand conductors of 0.1mm pure copper with cotton reinforcement, wrapped in a soft-grip rubberised jacket that resists tangling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the lead is shielded along its length to reduce noise pickup from nearby power cables and other gear.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272070816011,"sku":"190.066UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190066UK_0.jpg?v=1785032285"},{"product_id":"qtx-essential-xlr-microphone-lead-1-5m-balanced-cable","title":"QTX Essential XLR Microphone Lead 1.5m Balanced Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis QTX Essential microphone lead carries balanced audio signals between a female XLR and a male XLR connector. It measures 1.5m, which suits short runs between a microphone and a mixer, stage box or audio interface. The fully shielded design helps keep out interference, so your signal stays clean across the length of the cable.\u003c\/p\u003e\n\u003cp\u003eThe outer jacket is a soft-grip, rubberised material that resists tangles, making the lead easy to coil and store between uses. Inside, the connections are machine-soldered for consistency, and the die-cast XLR connectors lock into place so the cable stays put once plugged in. The two conductors are 20-strand at 0.1mm², with a cable diameter of 6.0mm.\u003c\/p\u003e\n\u003cp\u003eXLR leads like this are a standard part of any live or studio setup, and having a few spares to hand is always sensible. This one works with dynamic and condenser microphones, as well as any balanced line-level gear that uses XLR connectors. If you need a reliable, everyday lead without paying over the odds, the Essential range covers the basics well.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 20 strand, 0.1mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eFemale XLR, Male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length is this microphone lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures 1.5m, which suits short connections between a microphone and a mixer, stage box or audio interface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it carry a balanced signal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The lead is fully shielded and capable of carrying balanced signals, which helps reduce interference over the run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a female XLR connector at one end and a male XLR connector at the other, both die-cast with locking mechanisms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with condenser microphones?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. As a balanced XLR lead it works with both dynamic and condenser microphones, as well as balanced line-level equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable easy to store?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe jacket is soft-grip and anti-tangle, so the lead coils neatly and stays manageable between uses.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272071110923,"sku":"190.080UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190080UK_0.jpg?v=1785032532"},{"product_id":"qtx-essential-microphone-lead-xlr-female-to-male-3-0m","title":"QTX Essential Microphone Lead XLR Female to Male 3.0m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis QTX Essential microphone lead carries balanced audio signals between XLR female and XLR male connections. It measures 3.0m, which suits most stage and studio setups where you need a bit of slack without excess cable underfoot. The fully shielded design helps keep interference out, so your signal stays clean over the run.\u003c\/p\u003e\n\u003cp\u003eThe cable itself has a soft-grip, rubberised jacket that resists tangling, which makes it quicker to coil and store between uses. Inside you get two 20-strand conductors at 0.1mm cross-section, wrapped in shielding within a 6.0mm diameter jacket. The connections are machine-soldered for consistency, and the die-cast XLR connectors lock into place so the lead won't pull free during a set. XLR is the standard three-pin connector used for microphones and balanced line-level gear.\u003c\/p\u003e\n\u003cp\u003eWe supply this lead as a straightforward, reliable option for connecting dynamic and condenser microphones to mixers, interfaces and stage boxes. The male and female ends let you daisy-chain leads together for longer runs, or plug straight into your mixing desk. At 3.0m it works well for close-in vocal mics, drum overheads and instrument pickups alike. If you need to kit out a rehearsal room or small venue, it's an easy lead to keep spares of. The balanced wiring means you can run longer distances without picking up hum, and the locking connectors give you peace of mind that nothing will come loose mid-performance. It's a practical choice for regular gigging and everyday recording work where you want dependable audio without fuss.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e6.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 20 strand, 0.1mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eFemale XLR, Male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length is this microphone lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures 3.0m, which suits most stage and studio positions while leaving a little slack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a female XLR at one end and a male XLR at the other, both locking die-cast types.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I join two leads together for a longer run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The male and female ends let you daisy-chain leads to reach longer distances.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable balanced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It carries balanced signals using two 20-strand conductors within a fully shielded jacket, which helps reject hum and interference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it resist tangling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe soft-grip rubberised jacket is designed to be anti-tangle, so it coils and stores easily.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable diameter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe jacket measures 6.0mm in diameter.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272071143691,"sku":"190.081UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190081UK_0.jpg?v=1785032560"},{"product_id":"qtx-essential-balanced-xlr-microphone-lead-6-0m","title":"QTX Essential Balanced XLR Microphone Lead 6.0m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is our QTX Essential microphone lead, built to carry balanced audio signals between XLR female and XLR male connections. It suits standard studio and stage setups where you need a reliable link between a microphone and a mixer, preamp or interface. The lead is fully shielded, which helps keep unwanted noise and interference out of the signal path.\u003c\/p\u003e\n\u003cp\u003eThe jacket is a soft-grip, rubberised material that resists tangling, so the cable coils neatly and stays easy to handle during setup and pack-down. The connections are machine-soldered for consistency, and both ends use professional die-cast XLR connectors with a locking mechanism to hold them firmly in place. The male end plugs into your mixer or interface, while the female end connects to your microphone.\u003c\/p\u003e\n\u003cp\u003eInside, the cable measures 6.0mm in diameter and uses two conductors, each made from 20 strands at 0.1mm². This construction gives the lead enough flex for regular use without feeling flimsy. At 6.0m long, it covers a useful distance for most live and recording work. If you are new to the terms, an XLR lead is sometimes called a mic cable or a balanced audio cable, and all three refer to the same thing here.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e6.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 20 strand, 0.1mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eFemale XLR, Male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a female XLR connector at one end and a male XLR connector at the other, both die-cast with a locking mechanism.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 6.0m long, which suits most stage and studio setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it carry balanced signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It is fully shielded and capable of carrying balanced audio signals, which helps reduce noise over longer runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a soft-grip, anti-tangle rubberised jacket, with two conductors of 20-strand 0.1mm² wire inside.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this with a microphone and mixer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The male end connects to a mixer, preamp or interface, and the female end connects to your microphone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable diameter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable measures 6.0mm in diameter.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272071176459,"sku":"190.082UK","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190082UK_0.jpg?v=1785032587"},{"product_id":"qtx-essential-xlr-microphone-lead-12-0m-cable","title":"QTX Essential XLR Microphone Lead 12.0m Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis QTX Essential microphone lead carries balanced audio signals over a 12.0m run, connecting XLR female to XLR male. It is fully shielded, which helps keep interference out and gives you clean audio when you are running mics into a mixer or stage box. The balanced design is the standard choice for microphones and longer cable runs where noise can be a problem.\u003c\/p\u003e\n\u003cp\u003eThe cable itself has a soft-grip, rubberised jacket that resists tangling, so it coils neatly and lays flat during setup and pack-down. The connections are machine-soldered for consistency, and the XLR plugs are professional die-cast fittings with a locking mechanism. That locking latch keeps the plug seated in the socket so it will not pull free mid-performance.\u003c\/p\u003e\n\u003cp\u003eInside, the 6.0mm diameter cable carries two conductors, each made from 20 strands at 0.1mm cross-section, which suits regular use on stage and in the studio. At 12.0m this is a useful length for reaching from the front of a room back to the desk, or for spacing out mics across a stage. It works with any equipment using standard three-pin XLR inputs and outputs, including microphones, mixers, active speakers and audio interfaces.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e12.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e6.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 20 strand, 0.1mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eFemale XLR, Male XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length is this microphone lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the 12.0m version, giving you plenty of reach between a microphone and a mixer or stage box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it carry a balanced signal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The lead is fully shielded and wired for balanced audio, which helps reject noise and interference over longer runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a female XLR at one end and a male XLR at the other, both professional die-cast connectors with a locking latch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a soft-grip, anti-tangle rubberised jacket over a 6.0mm cable with two conductors of 20 strands at 0.1mm each.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I use this lead with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAny gear with standard three-pin XLR connections, such as microphones, mixers, active speakers and audio interfaces.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272071209227,"sku":"190.083UK","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190083UK_0.jpg?v=1785032612"},{"product_id":"qtx-essential-microphone-lead-xlr-female-to-6-3mm-jack","title":"QTX Essential Microphone Lead XLR Female to 6.3mm Jack","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eOur QTX Essential microphone lead connects a female XLR connector to a 6.3mm mono jack plug, giving you a straightforward way to run audio and microphone signals in an unbalanced setup. It measures 1.5m, which is handy for shorter runs between a microphone, mixer or amplifier where you don't need a long stretch of cable. The lead is fully shielded, so it does a solid job of keeping interference out of your signal.\u003c\/p\u003e\n\u003cp\u003eThe cable itself has a 6.0mm diameter with a soft-grip, rubberised jacket that resists tangling when you coil it up or move it around. Inside you'll find two conductors, each made up of 20 strands at 0.1mm diameter, which keeps the lead flexible while carrying your signal. The connections are machine-soldered for consistency, and the female XLR fitting uses a die-cast body that stands up to regular handling and repeated plugging in and out.\u003c\/p\u003e\n\u003cp\u003eThis is a practical, no-fuss lead for anyone plugging a microphone or audio source into gear that takes a 6.3mm jack. Because it's an unbalanced lead, it suits shorter cable runs where noise is less of a concern. If you're setting up a small PA rig, a rehearsal space or a home recording corner, it's a dependable option that keeps your connections tidy and your signal clean.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e6.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003e2 x 20 strand, 0.1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eFemale XLR, 6.3mm mono jack plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is this lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis version is 1.5m long, which suits shorter runs between a microphone, mixer or amplifier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a balanced or unbalanced lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's an unbalanced lead, so it works best over shorter distances where interference is less of an issue.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a female XLR connector at one end and a 6.3mm mono jack plug at the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the 6.3mm jack the same as a 1\/4 inch jack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable resist tangling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the rubberised, soft-grip jacket is designed to resist tangling when you coil and store it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable diameter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable has a 6.0mm diameter, with two conductors of 20 strands each at 0.1mm.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272071241995,"sku":"190.085UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190085UK_0.jpg?v=1785032638"},{"product_id":"qtx-essential-microphone-lead-xlr-to-6-3mm-jack-cable","title":"QTX Essential Microphone Lead XLR to 6.3mm Jack Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis QTX Essential microphone lead connects a female XLR to a 6.3mm mono jack plug, giving you a straightforward way to link microphones and audio gear that use unbalanced signals. It measures 3.0m, which suits most stage and studio setups where you need a bit of reach without excess cable to trip over or coil away.\u003c\/p\u003e\n\u003cp\u003eThe cable is fully shielded to help keep interference out of your signal, and it runs through a soft-grip, anti-tangle rubberised jacket. That jacket makes the lead easy to handle, quick to lay out and simple to pack down after a session. Inside, the conductor is made up of 2 x 20 strands at 0.1mm each, with an overall cable diameter of 6.0mm, so it stays flexible while holding up to regular use.\u003c\/p\u003e\n\u003cp\u003eConnections are machine-soldered for consistency, and the ends use a professional die-cast female XLR connector and a 6.3mm mono jack plug. It is a practical choice for connecting dynamic microphones to mixers, amplifiers or recording interfaces that take a jack input, and works equally well for general audio patching where an unbalanced lead is the right fit. If you run a mix of gear at home, in a rehearsal space or on a small stage, this lead covers the basics without fuss.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e6.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003e2 x 20 strand, 0.1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eFemale XLR, 6.3mm mono jack plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a female XLR connector on one end and a 6.3mm mono jack plug on the other, so you can link a microphone to a jack input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a balanced or unbalanced cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is an unbalanced lead, using a 6.3mm mono jack. For balanced connections you would need an XLR to XLR or XLR to TRS jack lead instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis version is 3.0m long, which suits most stage and studio distances.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded against interference?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it is fully shielded to help reduce noise and interference in your signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I use this lead for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt works for connecting dynamic microphones to mixers, amplifiers or interfaces with a 6.3mm jack input, and for general unbalanced audio patching.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the jacket easy to handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe jacket is a soft-grip, anti-tangle rubberised design, so the lead stays flexible and is quick to lay out and pack away.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272071274763,"sku":"190.086UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190086UK_0.jpg?v=1785032668"},{"product_id":"qtx-essential-microphone-lead-xlr-to-6-3mm-jack","title":"QTX Essential Microphone Lead XLR to 6.3mm Jack","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is our QTX Essential microphone lead, built to carry unbalanced audio signals between a female XLR connector and a 6.3mm mono jack plug. It runs to 6.0m, giving you room to work across a stage, studio or rehearsal space without being tied too close to your gear. The lead is fully shielded, which helps keep unwanted noise and interference out of the signal path.\u003c\/p\u003e\n\u003cp\u003eThe cable has a soft-grip, rubberised jacket that resists tangles, so it coils away neatly and stays manageable when you are setting up or packing down. The connectors are professional die-cast XLR female and 6.3mm mono jack, and the connections are machine-soldered for consistency. The cable itself measures 6.0mm in diameter and uses two conductors of 20-strand, 0.1mm construction.\u003c\/p\u003e\n\u003cp\u003eIt suits anyone connecting a microphone to a mixer, amp or interface where an unbalanced run is needed, and it works equally well for general audio patching. Because it is an unbalanced lead, we would keep the runs sensible on longer cable routes to avoid picking up hum, but at 6.0m it strikes a practical balance for most live and home setups. If you want a straightforward, well-made lead that does the job without fuss, this one fits the bill.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e6.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e6.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003e2 x 20 strand, 0.1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eFemale XLR, 6.3mm mono jack plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a female XLR connector on one end and a 6.3mm mono jack plug on the other, both die-cast for durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis version is 6.0m long, giving you plenty of reach for stage or studio use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a balanced or unbalanced lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is an unbalanced lead. It uses a mono jack, so it is designed to carry unbalanced signals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the 6.3mm jack the same as a 1\/4-inch plug?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 6.3mm mono jack is commonly referred to as a 1\/4-inch plug, particularly in the US.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable resist tangling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The soft-grip, rubberised jacket is designed to be anti-tangle, so it coils and stores neatly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I use this lead for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is ideal for connecting a microphone to a mixer, amp or audio interface, and for general unbalanced audio patching.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272071307531,"sku":"190.087UK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190087UK_0.jpg?v=1785032695"},{"product_id":"qtx-essential-microphone-lead-xlr-to-6-3mm-jack-12m","title":"QTX Essential Microphone Lead XLR to 6.3mm Jack 12m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eOur QTX Essential microphone lead connects a female XLR to a 6.3mm mono jack plug, giving you a straightforward link between a microphone and a range of mixers, amps and audio gear. At 12 metres, it covers plenty of ground on stage or in a rehearsal space, so you can position your kit where it suits you rather than where the socket happens to be. The lead handles unbalanced signals and is a sensible choice for general microphone and audio duties.\u003c\/p\u003e\n\u003cp\u003eThe cable is fully shielded to help keep interference at bay, with a 6.0mm diameter jacket wrapped in a soft-grip, rubberised finish. That coating is designed to resist tangling, so the lead stays easy to coil down and pack away after a gig. Inside, the conductor is made up of 2 x 20 strands at 0.1mm each, and the connections are machine-soldered for consistency across every unit. The 6.3mm jack (also called a 1\/4 inch jack) plug is a familiar fit for most instrument and audio inputs.\u003c\/p\u003e\n\u003cp\u003eAt each end you get a professional die-cast female XLR connector and the 6.3mm mono jack plug, both built to take the knocks of regular use. This kind of lead is a workhorse rather than a one-off, so it pairs well with the rest of your setup and earns its place in a gig bag. If you need a reliable microphone lead for live work, practice or home recording, this one does the job without any fuss.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e12.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003e2 x 20 strand, 0.1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eFemale XLR, 6.3mm mono jack plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a female XLR connector at one end and a 6.3mm mono jack plug at the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a balanced or unbalanced lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt carries unbalanced signals, using the female XLR to 6.3mm mono jack combination.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis version is 12.0 metres long, which suits stage and studio use where you need some reach.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a 6.3mm jack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's the standard 1\/4 inch jack plug used on many mixers, amps and audio inputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it is fully shielded to help reduce interference during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow thick is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable has a 6.0mm diameter with a soft-grip, anti-tangle rubberised jacket.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272071340299,"sku":"190.088UK","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190088UK_0.jpg?v=1785032723"},{"product_id":"citronic-xf-xm050bk-balanced-xlr-microphone-lead-0-5m-black","title":"Citronic XF-XM050BK Balanced XLR Microphone Lead 0.5m - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis 0.5m Citronic microphone lead connects a female XLR to a male XLR, ready to carry balanced audio signals with good clarity and reliable performance. The short length suits close patching between mixers, stage boxes, patch bays and other rack gear where a longer cable would only get in the way. It is fully shielded to help keep interference out of your signal path.\u003c\/p\u003e\n\u003cp\u003eThe lead is built with pure copper conductors and cotton reinforcement, so it stands up well to regular handling on stage and in the studio. The rubberised jacket has a soft-grip, anti-tangle finish that makes coiling and storing straightforward. Connections are machine-soldered for consistency, and the professional die-cast XLR connectors lock into place to stop the cable pulling free during a performance.\u003c\/p\u003e\n\u003cp\u003eThe cable measures 6mm in diameter and uses 20 x 0.08mm conductors. Wiring follows the standard balanced pin-out, with pin 1 as ground, pin 2 hot and pin 3 cold, so it works with any balanced XLR equipment you already own. If you need a tidy, dependable short link for your setup, this is a sensible choice.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e0.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e20 x 0.08mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eMale XLR, Female XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin-out\u003c\/td\u003e\n\u003ctd\u003eBalanced: 1-Ground, 2-Hot, 3-Cold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is this microphone lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is 0.5m long, which suits short runs between mixers, patch bays and nearby rack equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a male XLR at one end and a female XLR at the other, both die-cast with a locking mechanism.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable balanced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It carries balanced signals using the standard pin-out: pin 1 ground, pin 2 hot and pin 3 cold.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses pure copper conductors with cotton reinforcement and a rubberised, anti-tangle jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the connectors stay in place?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The XLR connectors lock into your equipment to stop the cable pulling free while you work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable diameter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable measures 6mm in diameter and uses 20 x 0.08mm conductors.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272071373067,"sku":"190.089UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190089UK_0.jpg?v=1785032749"},{"product_id":"citronic-xf-xm150bk-balanced-xlr-microphone-lead-1-5m-black","title":"Citronic XF-XM150BK Balanced XLR Microphone Lead 1.5m - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic XF-XM150BK is a 1.5m balanced microphone lead with a female XLR to male XLR connection. It's built to carry balanced signals with clean sound and steady reliability, making it a solid choice for stage, studio and general audio use. The fully shielded design helps keep interference out, so your signal stays clear even in busy setups.\u003c\/p\u003e\n\u003cp\u003eInside, the lead uses pure copper conductors with cotton reinforcement for strength, wrapped in a soft-grip, rubberised jacket that resists tangling and coils away neatly. The connections are machine-soldered for consistency, and the male and female XLR connectors are professional die-cast units with a locking mechanism to hold them firmly in place. The cable measures 6mm in diameter, with 20 x 0.08mm conductors running through it.\u003c\/p\u003e\n\u003cp\u003eThe pin-out follows the standard balanced wiring: pin 1 to ground, pin 2 hot and pin 3 cold. That means it works with any balanced XLR gear, from microphones through to mixers and active speakers. At 1.5m it's a handy length for short runs and patching between nearby equipment, and the black jacket keeps it low-key on stage or in the rack. It's a straightforward, well-made lead you can rely on job after job.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e20 x 0.08mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eMale XLR, Female XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin-out\u003c\/td\u003e\n\u003ctd\u003eBalanced: 1-Ground, 2-Hot, 3-Cold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is this microphone lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures 1.5m from connector to connector, which suits short runs and patching between nearby equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a female XLR at one end and a male XLR at the other, both professional locking die-cast connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a balanced cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It carries balanced signals with the standard pin-out: pin 1 ground, pin 2 hot and pin 3 cold.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses pure copper conductors with cotton reinforcement, inside a soft-grip, anti-tangle rubberised jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with my mixer and microphones?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. With standard balanced XLR wiring, it connects microphones, mixers, active speakers and other balanced gear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable diameter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable is 6mm in diameter, with 20 x 0.08mm conductors running through it.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272071405835,"sku":"190.090UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190090UK_0.jpg?v=1785032776"},{"product_id":"citronic-xf-xm150rd-balanced-xlr-microphone-lead-1-5m-red","title":"Citronic XF-XM150RD Balanced XLR Microphone Lead 1.5m - Red","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic XF-XM150RD is a 1.5m microphone lead with a female XLR at one end and a male XLR at the other. It carries balanced signals, which helps keep noise and interference low over the run, so it suits live vocals, studio work and general stage use. The red jacket makes it easy to pick out when you have several leads bundled together.\u003c\/p\u003e\n\u003cp\u003eBuild quality comes from pure copper conductors and cotton reinforcement, giving the cable good conductivity and strength through repeated coiling. The 6mm diameter jacket is rubberised, soft-grip and anti-tangle, so it lies flat and packs away without knotting. Connections are machine-soldered for consistency, and the die-cast XLR connectors lock into place to stop the lead pulling free during a set.\u003c\/p\u003e\n\u003cp\u003eThe cable uses 20 x 0.08mm conductors and is fully shielded to reject hum and radio interference. The pin-out follows the standard balanced layout: pin 1 ground, pin 2 hot and pin 3 cold, so it works straight away with standard microphones, mixers and stage boxes. At 1.5m it is a handy short length for close runs, patching between units or connecting a microphone that sits near the desk. If you need longer or shorter runs, the same lead is offered in other lengths across the range.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e20 x 0.08mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eMale XLR, Female XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin-out\u003c\/td\u003e\n\u003ctd\u003eBalanced: 1-Ground, 2-Hot, 3-Cold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length is this microphone lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is 1.5m long, which suits short runs, patching between units or a microphone placed close to the mixer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it carry a balanced signal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It is wired for balanced use with pin 1 ground, pin 2 hot and pin 3 cold, which helps reject noise over the cable run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA female XLR at one end and a male XLR at the other, both die-cast with a locking mechanism to stop the lead pulling free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable shielded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it is fully shielded to reduce hum and radio interference, with pure copper conductors and cotton reinforcement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with my microphone and mixer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses the standard balanced XLR pin-out, so it works with standard microphones, mixers and stage boxes.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272071438603,"sku":"190.091UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190091UK_0.jpg?v=1785032804"},{"product_id":"citronic-xf-xm150bl-balanced-xlr-microphone-lead-1-5m-blue","title":"Citronic XF-XM150BL Balanced XLR Microphone Lead 1.5m - Blue","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic XF-XM150BL is a 1.5m microphone lead with a female XLR at one end and a male XLR at the other, ready to run balanced signals between your microphone, mixer or stage box. The fully shielded design keeps interference out, so you get clean, reliable audio whether you're recording, rehearsing or playing live. This is the blue version, which makes it easy to colour-code your cable runs on a busy stage or in the studio.\u003c\/p\u003e\n\u003cp\u003eInside, the cable uses pure copper conductors with cotton reinforcement for strength, wrapped in a soft-grip, rubberised jacket that resists tangling and coils away neatly. The connections are machine-soldered for consistency, and the XLR plugs (also called cannon connectors in some circles) are die-cast with a locking latch, so they stay put and won't drop out mid-performance. It's a hard-wearing lead built to take the knocks of regular use.\u003c\/p\u003e\n\u003cp\u003eWith a 6mm cable diameter and 20 x 0.08mm conductor strands, the XF-XM150BL follows the standard balanced pin-out: pin 1 ground, pin 2 hot, pin 3 cold. That makes it a straightforward fit for dynamic and condenser microphones as well as any balanced line-level gear. At 1.5m it suits short runs from mic to stand-mounted mixer, patch bays or nearby inputs, and it pairs neatly with longer leads from the same range.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e20 x 0.08mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eMale XLR, Female XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin-out\u003c\/td\u003e\n\u003ctd\u003eBalanced: 1-Ground, 2-Hot, 3-Cold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this cable balanced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It carries balanced signals using a three-pin XLR wiring: pin 1 ground, pin 2 hot and pin 3 cold. This helps reject noise over longer runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length is the lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's 1.5m long, which suits short runs between a microphone and a nearby mixer, stand or input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne male XLR and one female XLR, both die-cast with a locking latch to keep the connection secure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with my microphone?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it fits standard XLR inputs and outputs, so it works with most dynamic and condenser microphones and any balanced XLR gear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePure copper conductors with cotton reinforcement, wrapped in a soft-grip, rubberised, anti-tangle jacket and full shielding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I chain it with other leads?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The male and female ends let you connect it to other XLR leads to extend a run when you need more reach.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272071471371,"sku":"190.092UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190092UK_0.jpg?v=1785032834"},{"product_id":"citronic-xf-xm150yw-balanced-xlr-microphone-lead-1-5m-yellow","title":"Citronic XF-XM150YW Balanced XLR Microphone Lead 1.5m Yellow","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic microphone lead carries balanced audio signals between XLR female and XLR male connections. It measures 1.5m in length and comes in yellow, which makes it easy to spot and colour-code within a busy stage or studio setup. The lead is fully shielded, so it keeps interference out and helps maintain a clean signal across the run.\u003c\/p\u003e\n\u003cp\u003eInside the cable you get pure copper conductors with cotton reinforcement, wrapped in a soft-grip rubberised jacket that resists tangling. The connectors are professional die-cast XLR types with a locking mechanism on the female end, so once a plug is seated it stays put. Connections are machine-soldered, which gives consistent, repeatable joints across the range. The cable diameter is 6mm, with 20 conductor strands each measuring 0.08mm.\u003c\/p\u003e\n\u003cp\u003eThe pin-out follows the standard balanced wiring: pin 1 ground, pin 2 hot, and pin 3 cold. This makes the lead suitable for dynamic and condenser microphones, mixing desks, and other balanced audio gear. At 1.5m it works well for short patch runs and tight setups where a longer cable would just get in the way.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCitronic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e20 x 0.08mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eMale XLR, Female XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin-out\u003c\/td\u003e\n\u003ctd\u003eBalanced: 1-Ground, 2-Hot, 3-Cold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length is this microphone lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is 1.5m long, which suits short patch runs and compact setups where a longer cable would be surplus.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable balanced or unbalanced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is balanced, wired 1-ground, 2-hot, 3-cold across three-pin XLR connectors, so it rejects noise over longer runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a die-cast XLR male at one end and a locking XLR female at the other, both suited to professional audio use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePure copper conductors with cotton reinforcement, plus a soft-grip rubberised jacket that resists tangling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with condenser microphones?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The balanced XLR wiring supports both dynamic and condenser microphones, as well as mixing desks and other balanced gear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose the yellow version?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe yellow jacket makes the lead easy to identify and colour-code when you are running several cables at once.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272071504139,"sku":"190.093UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190093UK_0.jpg?v=1785032863"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/collections\/190265UK_0.jpg?v=1791550590","url":"https:\/\/niori.co.uk\/collections\/xlr-cables.oembed?page=2","provider":"Niori","version":"1.0","type":"link"}