{"title":"White Sockets \u0026 Switches","description":"\u003cp\u003eOur white sockets \u0026amp; switches run from white plug sockets and light switches to dimmers, fused spurs and USB sockets. Plates come in metal or in plastics such as thermoset resin, ABS and polycarbonate, with screwless, flat plate, rounded edge and square edge styles, so a whole room can match. Before you order, check the product page for the back box depth you will need.\u003c\/p\u003e","products":[{"product_id":"13a-rough-use-plug-top-quick-fix-cord-grip-white","title":"13A Rough Use Plug Top Quick Fix Cord Grip - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SN2135W is a 13A rough use plug top moulded from white polypropylene with a nylon quick-fix cord grip and a replaceable 13A fuse fitted as standard. The quick-fix cord grip clamps the cable without requiring screws, allowing the plug to be wired and assembled faster than traditional screw-down clamps.\u003c\/p\u003e\n\u003cp\u003eDesigned for workshop, garage and site environments where plugs are subject to frequent plugging\/unplugging, knocks and drops, the thickened polypropylene body resists impact cracking better than standard domestic plugs. The white finish hides dust and general workshop grime less visibly than translucent or clear housings. The plug is rated at 13A on 230V mains, handling loads up to 2,990W.\u003c\/p\u003e\n\u003cp\u003eThe plug carries BSI Kitemark certification and complies with BS 1363-2, the British Standard for 13A plugs. The IP20 rating indicates protection against solid objects larger than 12.5mm but no water ingress protection, so the plug is suitable for dry indoor environments only. The nylon cord grip accepts cable diameters typical of UK flex (6-10mm outer diameter) and holds the cable securely once the top half of the plug body is clipped into place.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e47 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e49 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e42 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3638436_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 'rough use' mean in this context?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRough use plugs have thicker polypropylene bodies than standard domestic plugs, making them more resistant to impact cracking when dropped or knocked in workshop and garage environments. They are designed for higher-frequency plugging and unplugging than typical household plugs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the quick-fix cord grip work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe nylon cord grip clamps the cable without requiring a screw-down clamp. The cable is threaded through the grip, the conductors are connected to the terminals, and the top half of the plug body clips into place, compressing the grip around the cable sheath to hold it securely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the fuse replaceable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The plug is fitted with a standard BS 1362 13A fuse that can be replaced if it blows. Replacement fuses are widely available at electrical retailers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this plug be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating provides no protection against water ingress, so the plug is suitable for dry indoor environments only. For outdoor use, a plug with a minimum IP rating of IPX4 is required.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293551649035,"sku":"SN2135W","price":1.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/532666_bd957f21-8f2b-4fd9-aac4-6d71596b2ac9.jpg?v=1714660171"},{"product_id":"120-pir-sensor-module-50x50mm-white","title":"120° PIR Sensor Module 50x50mm - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge 50x50mm PIR sensor module detects motion within a 120° field up to approximately 5 metres away, switching connected lighting on for a pre-set three-minute duration before automatically turning off when the space is unoccupied. The module is sized to fit euro modular frames that accept 50x50mm inserts, allowing it to be combined with switches, sockets and other modules in a single faceplate.\u003c\/p\u003e\n\u003cp\u003eDesigned for hallways, communal corridors, storage rooms and other spaces where automatic lighting reduces the need for manual switching, the sensor operates on 230V mains and supports loads up to 100W LED or 200W incandescent. A built-in lux sensor prevents the lights from activating when natural daylight is sufficient, improving energy efficiency in rooms with windows or skylights. The 47mm minimum back box depth requirement fits standard UK cavity wall construction.\u003c\/p\u003e\n\u003cp\u003eThe white polycarbonate construction carries an IP20 rating for dry indoor use and a Class II double-insulated design, meaning no earth connection is required. The module wires into the lighting circuit using live and neutral terminals inside the back box, with the modular faceplate (sold separately) clipping over the installed module to complete the wall finish. White is the most common choice for residential and commercial installations where a neutral colour is preferred.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3880437_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does the light stay on after detecting motion?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe sensor switches the light on for a pre-set three-minute duration after detecting movement. If motion continues, the timer resets. Once the space is unoccupied for three minutes, the light switches off automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the lux sensor prevent the light from coming on during daylight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The built-in lux sensor monitors ambient light levels and prevents the PIR from activating the lights when natural daylight is sufficient. This is useful in hallways with windows where daytime operation would waste energy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat faceplate is needed to complete the installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module requires a euro modular faceplate that accepts 50x50mm inserts. Knightsbridge produces compatible faceplates in various finishes including white, chrome, brass and black. The faceplate is sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It is rated IP20, so it is for dry rooms only.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293552271627,"sku":"NETPIRWH","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/738048_8bbcf220-bf00-483a-b4d2-7da464050acc.jpg?v=1714660187"},{"product_id":"50x50mm-modular-reading-light-white-with-touch-dimmer","title":"50x50mm Modular Reading Light - White with Touch Dimmer","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 50x50mm modular reading light is a task light designed to fit euro modular faceplate systems, providing a directed 2W LED reading light alongside switches and sockets in bedrooms, hotel rooms and study spaces. The unit comprises a white aluminium and polycarbonate 50x50mm faceplate module, a 372mm flexible gooseneck arm, and a lamp head with integrated touch dimmer control.\u003c\/p\u003e\n\u003cp\u003eDesigned for bedside reading positions, desk edges and hotel headboard installations, the reading light mounts flush into a 35mm minimum back box depth and sits in the same grid as standard euro modular switches and sockets. The 372mm arm length allows the lamp head to be positioned over a pillow, a desk surface, or angled towards a reading chair without needing a separate floor or table lamp. The touch control on the head unit cycles between off, full brightness, and dimmed output without needing to reach for a wall switch.\u003c\/p\u003e\n\u003cp\u003eThe integrated 2W LED outputs 55 lumens at 3000K warm white, providing focused task light rather than ambient room lighting. The 120-degree beam angle spreads light across a typical A4 page or tablet screen without creating a tight spotlight effect. The white finish on the faceplate module matches standard white euro modular switch ranges from Knightsbridge, allowing the reading light to sit in a multi-gang faceplate alongside sockets, USB chargers and dimmer modules. The aluminium and polycarbonate construction gives the arm enough rigidity to hold position once adjusted, while the Class II double-insulated design requires no earth connection during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e372 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e30000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eWarm White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e55 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e70 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e37.5 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3880566_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat euro modular systems is this compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 50x50mm module fits Knightsbridge's euro modular faceplate range and other standard euro modular grid systems that accept 50x50mm inserts. It can be combined with switches, sockets, USB chargers and dimmer modules in multi-gang faceplates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the touch dimmer work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe touch control on the lamp head cycles through three states: off, full brightness (55 lumens), and dimmed output. Touch the control once to turn on at full brightness, touch again to dim, touch a third time to turn off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 35mm back box depth is needed to accommodate the 33mm recessed depth of the module. Deeper back boxes provide more cable management space but are not required for the light itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the arm hold its position once adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 372mm gooseneck arm is made from aluminium with enough rigidity to hold position once bent, allowing the lamp head to be angled towards a reading position and stay in place during use.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293552468235,"sku":"NETRLWH","price":38.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1211482_6c331431-1a1e-446c-bada-ec6919179ea5.jpg?v=1714660194"},{"product_id":"small-multimedia-combination-plate-white-curved-edge-2-gang-socket-4-module","title":"Small Multimedia Combination Plate - White Curved Edge 2 Gang Socket + 4 Module","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Small Multimedia Combination Plate combines a 2-gang 13A DP switched socket with space for four 25x50mm Euro module inserts, all behind a single white curved-edge faceplate. The 175x148mm plate allows mains power and low-voltage signal connections to be grouped in one location rather than scattered across multiple separate faceplates.\u003c\/p\u003e\n\u003cp\u003eDesigned for AV installations, home offices, and kitchen media walls where both power and data\/signal connections are needed in close proximity, the plate fits a standard 130x157x48mm cut-out box. The four module apertures accept any 25x50mm Euro module insert from the Knightsbridge range, including HDMI, satellite TV, CAT6 networking, telephone, USB charging, or coaxial connectors. This means the configuration can be tailored to the specific cabling run behind the wall during installation.\u003c\/p\u003e\n\u003cp\u003eThe 2-gang socket section provides two independently switched 13A outlets with double-pole switching, isolating both live and neutral when switched off. The white thermoset resin construction carries anti-microbial properties tested to ISO 22196:2011 and is rated IP20 for general dry indoor use. The curved-edge profile sits 7mm proud of the wall once fitted, with visible fixings at each corner. Knightsbridge backs the plate with a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e175 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e148 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e130\/157\/48 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eThermoset resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Microbial Properties\u003c\/td\u003e\n\u003ctd\u003e3rd Party Tested to ISO 22196:2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3891565_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1147606.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat module inserts are compatible?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe plate accepts any 25x50mm Euro module insert from the Knightsbridge modular range. Common choices include HDMI, CAT6 RJ45 networking, satellite F-type coaxial, USB charging modules, 3.5mm audio jacks, and telephone RJ11 sockets. Module inserts are sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box size is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 130x157x48mm cut-out box is required. The plate projection adds 7mm from the wall surface once fitted. Ensure sufficient cable entry space behind the box for both mains and low-voltage cabling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this screwless or screw-fixed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a screw-fixed plate with visible fixings at each corner. Knightsbridge offers screwless versions in other ranges if a concealed-fixing finish is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the module layout be changed after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Euro module inserts clip into the apertures and can be swapped out without re-wiring the mains section, provided the necessary cabling is already terminated behind the plate.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293553156363,"sku":"CU194MM","price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1544100_f034693d-8ea3-40a5-ab48-81a3888c9f9d.jpg?v=1714660223"},{"product_id":"knightsbridge-2-gang-surface-box-white","title":"Knightsbridge 2 Gang Surface Box - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 2-gang surface box is a white polycarbonate mounting box designed to pair with Knightsbridge screwless and flat plate switches and sockets. At 32mm deep, the box provides enough cavity space for cable termination and back-of-plate clearance when a screwless or flat plate faceplate is fitted onto the front.\u003c\/p\u003e\n\u003cp\u003eSurface boxes are used where chasing into the wall for a flush-mounted back box is impractical or prohibited — on solid walls, tiled surfaces, listed buildings, or temporary installations where surface wiring is run in conduit or trunking. The box mounts directly to the wall surface using the three fixing holes (one at the top, two at the base), and the faceplate then fixes to the front of the box using the same lugs and fixing points as a standard back box.\u003c\/p\u003e\n\u003cp\u003eThe white polycarbonate construction gives the box an IP20 rating for dry indoor use and a 25-year warranty. The outer dimensions of 152.5mm wide by 92.5mm high by 34mm projection from the wall match the standard 2-gang footprint, so any Knightsbridge 2-gang screwless or flat plate faceplate will align correctly with the fixing points and aperture.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e152.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e34 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3897842_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat Knightsbridge faceplates are compatible?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis box accepts any Knightsbridge 2-gang screwless or flat plate faceplate. The fixing points and aperture dimensions match the standard 2-gang back box footprint, so switches, sockets and dimmers in those ranges fit directly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the box is suitable for dry indoor locations only. For outdoor or bathroom installations an IP-rated surface box and corresponding IP-rated faceplate are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include an earth terminal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The box does not have an integrated earth terminal. Earthing must be handled at the faceplate level or via a separate earth point in the cable run, depending on the specific installation and the requirements of the faceplate being fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the internal depth for cable clearance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 32mm internal depth provides clearance for cable termination behind most 2-gang faceplates. When using screwless plates with a separate sub-frame, ensure the combined depth of the sub-frame and back-of-plate does not exceed the available cavity space.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293553385739,"sku":"2GSBW","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/469352_c233ffdc-a1eb-4e93-a7ba-3656f9bfbbc7.jpg?v=1714660235"},{"product_id":"grid-switch-cover-marked-fridge-matt-white","title":"Grid Switch Cover Marked 'FRIDGE' - Matt White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge grid switch cover is a replacement rocker marked 'FRIDGE' in grey text on a matt white ABS face. The rocker measures 33mm high by 16mm wide and clips onto standard Knightsbridge grid switch modules to replace the blank or existing printed rocker, allowing kitchen outlets to be clearly labelled without replacing the entire switch mechanism.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchen installations where multiple appliances share a bank of grid switches, the printed designation helps identify which rocker controls the fridge, reducing the chance of accidentally switching off a cold appliance. The rocker is compatible with Knightsbridge's modular grid switch system, which allows multiple switches and sockets to be combined in a single faceplate. The matt white finish matches standard white grid plates and neutral kitchen décor.\u003c\/p\u003e\n\u003cp\u003eThe rocker is constructed from ABS plastic reinforced with a steel spring clip that holds it onto the switch module. The IP20 rating confirms it is suitable for dry indoor locations. The 6.8mm projection sits flush with typical grid faceplates, maintaining a low profile on the wall. Knightsbridge produces this style of printed rocker with other appliance designations including 'WASHING MACHINE', 'DISHWASHER', 'COOKER', and 'WATER HEATER' to label the full run of kitchen outlets.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3905875_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit my existing Knightsbridge grid switch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis rocker cover fits all standard Knightsbridge grid switch modules. It clips directly onto the switch mechanism, replacing the existing rocker without needing to remove the module from the grid plate or rewire.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I change the rocker without turning off the power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe rocker cover can be removed and replaced while the switch is live, as it is a purely cosmetic cover that clips onto the front of the module. However, always follow safe working practice when handling electrical accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other appliance labels are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces rockers marked with 'WASHING MACHINE', 'DISHWASHER', 'COOKER', 'WATER HEATER', 'FREEZER', and others in the same matt white finish. Search 'Knightsbridge grid switch cover' at Niori to see the full range.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293556433163,"sku":"GDFRIDGEMW","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/460082_5c0999b1-53b7-487a-987e-78117caa6232.jpg?v=1714660329"},{"product_id":"grid-switch-cover-marked-fridge-white","title":"Grid Switch Cover Marked 'FRIDGE' - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge grid switch cover is a white ABS rocker pre-printed with 'FRIDGE' in black text. The cover clips onto a standard Knightsbridge grid rocker module, replacing the blank rocker that came with the original switch. Once fitted, the designation identifies which outlet controls the fridge circuit at a glance.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchens where multiple appliances share a grid plate or grid system, the marked cover allows kitchen staff, occupants or maintenance engineers to identify the correct switch without trial and error. The cover sits 6.8mm proud of the grid module once clipped on, with the text recessed into the white ABS surface to resist wear. The IP20 rating suits dry indoor locations including domestic and commercial kitchens not subject to direct water spray.\u003c\/p\u003e\n\u003cp\u003eThe white finish matches Knightsbridge's standard white grid modules and white grid plates, maintaining a consistent appearance across a multi-outlet installation. The rocker measures 33mm tall by 16mm wide, fitting all standard Knightsbridge grid rocker switches. Knightsbridge produces covers marked with other appliance designations (Dishwasher, Washing Machine, Cooker, Water Heater) — search the site for the full range.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3905877_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich grid modules does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cover fits all standard Knightsbridge grid rocker switches. It clips onto the existing rocker mechanism, replacing the blank cover that came with the module.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the cover be removed and reused?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover clips on and off the rocker module without tools, allowing it to be swapped for a different designation or replaced if damaged. The clip mechanism is rated for multiple removal and refitting cycles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other designations are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces pre-printed covers for common appliance circuits including Dishwasher, Washing Machine, Cooker, Water Heater, Immersion Heater, and other standard kitchen and utility room circuits. Search Niori's grid accessories section for the full range.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293556629771,"sku":"GDFRIDGEU","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/460086_cad5edca-fbd2-409a-948b-2cdce1b1c68f.jpg?v=1714660334"},{"product_id":"grid-switch-cover-marked-freezer-matt-white","title":"Grid Switch Cover Marked 'FREEZER' - Matt White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge grid switch cover is a pre-printed matt white rocker marked 'FREEZER' in grey sans-serif lettering, designed to replace the standard blank rocker on a grid switch module. The cover clips onto Knightsbridge 20A DP grid switches, allowing kitchen circuits to be labelled at the switch point for easy appliance identification.\u003c\/p\u003e\n\u003cp\u003eUsed in kitchens where multiple appliances are controlled from a dedicated switch bank, the labelled rocker removes guesswork when isolating specific circuits for maintenance or when moving house. The cover fits Knightsbridge's grid switch system, which allows multiple switch modules to be grouped within a single faceplate — common in UK kitchens where washing machines, dishwashers, electric ovens and freezers each require their own switched isolator.\u003c\/p\u003e\n\u003cp\u003eThe rocker measures 33mm high by 16mm wide with a 6.8mm projection from the module faceplate. It's constructed from ABS plastic with a steel internal spring, finished in matt white to match standard white grid faceplates. The cover is removed by gently prising it from the switch module with a flat-blade screwdriver, then the new labelled cover clicks into place without tools.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3905883_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Knightsbridge switches does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis rocker cover fits Knightsbridge 20A DP grid switch modules. It does not fit standard single-gang or 2-gang switches — only the modular grid system where multiple switch modules are mounted in a multi-gang grid faceplate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the cover changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGently prise the existing rocker from the switch module using a flat-blade screwdriver inserted at the side edge. The new pre-printed rocker clips into place without tools. The switch does not need to be removed from the wall or isolated to change the rocker.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other labels are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this style of pre-printed rocker cover with labels including 'WASHING MACHINE', 'DISHWASHER', 'COOKER', 'FRIDGE', 'BOILER' and others. Search Niori for 'grid switch cover' to see the full range in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293557219595,"sku":"GDFREEZERMW","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/460110_5dcdced1-b314-4ef3-bb41-b921643f6f86.jpg?v=1714660344"},{"product_id":"grid-switch-rocker-cover-marked-freezer-white","title":"Grid Switch Rocker Cover Marked 'Freezer' - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge grid switch rocker cover is a white ABS replacement cap marked 'FREEZER' in grey sans-serif text. The cover clips onto the rocker mechanism of a standard Knightsbridge grid switch, replacing a blank rocker with one that labels the circuit it controls. The cover measures 33mm high by 16mm wide with a 6.8mm projection from the switch faceplate.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchens, utility rooms and commercial spaces where multiple appliances are controlled from a single grid plate, the marked cover allows users to identify which switch operates which appliance without guessing or trial. The rocker is removed from the existing switch by hand and the new marked cover clicks into place without tools or re-wiring. The switch itself remains in position and continues to function exactly as before.\u003c\/p\u003e\n\u003cp\u003eThe white ABS construction matches standard white grid faceplates and provides an IP20 rating suitable for dry indoor locations. The grey text is moulded into the surface rather than printed, so it will not wear off with repeated switching. Knightsbridge offers this rocker cover style with a range of appliance labels including washing machine, dishwasher, oven, hob and boiler, allowing a full grid plate to be clearly marked for each circuit.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3905893_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit all grid switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis rocker cover is designed for Knightsbridge grid switches. It clips onto the rocker mechanism of standard Knightsbridge grid modules and may not fit grid systems from other manufacturers. If you are unsure which grid system is installed, contact us with a photo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the text wear off?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe grey 'FREEZER' text is moulded into the ABS surface during manufacture rather than printed on top, so it will not rub off or fade with use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs any wiring required to fit this?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The existing rocker cap is removed by hand and the new marked cover clicks into place. The switch mechanism and wiring remain untouched, and the switch continues to operate as before.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other labels are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this rocker cover style with labels for common kitchen and utility appliances including washing machine, dishwasher, oven, hob, boiler and immersion heater. Use the search function at Niori to find other variants in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293557448971,"sku":"GDFREEZERU","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/460118_b5b72c2a-318d-4f3a-8519-b709363b7caf.jpg?v=1714660349"},{"product_id":"knightsbridge-grid-switch-cover-marked-waste-disposal-matt-white","title":"Knightsbridge Grid Switch Cover Marked 'Waste Disposal' - Matt White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge grid switch cover is a pre-printed matt white rocker marked 'WASTE DISPOSAL' in grey text, designed to label switched grid outlets controlling waste disposal units in kitchens. The cover measures 33mm high by 16mm wide and clips onto Knightsbridge grid switch modules, replacing the blank or existing rocker already fitted to the switch.\u003c\/p\u003e\n\u003cp\u003eIntended for domestic and commercial kitchens where multiple appliances share a grid switch bank, the marked cover identifies which switch controls the waste disposal unit without needing additional signage or tape labels. The rocker is removed and replaced by hand — no tools or re-wiring required. The matt white finish matches standard Knightsbridge grid plates and provides a clean, low-sheen surface that resists fingerprints under kitchen lighting.\u003c\/p\u003e\n\u003cp\u003eThe cover body is moulded from ABS plastic with a steel internal spring mechanism that provides the tactile click when the switch is operated. The IP20 rating suits dry indoor locations. Knightsbridge backs the cover with a 25-year warranty, reflecting the durability expected from a component that sees daily use in a working kitchen.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3905903_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit all Knightsbridge grid switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover is a standard grid rocker size (33mm x 16mm) and fits any Knightsbridge grid switch module. It replaces the existing rocker by clipping on and off the switch mechanism without tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the cover be removed and reused?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The rocker clips onto the switch module and can be removed by hand if the switch needs to be relabelled or the cover replaced. The steel spring mechanism inside is rated for thousands of operations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other labels are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces pre-printed grid covers for common kitchen appliances including 'Washing Machine', 'Dishwasher', 'Cooker Hood', and blank covers for custom labelling. Use the search function to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293557842187,"sku":"GDWASTEMW","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/460144_9ec562b5-ec9c-48e1-b868-f81a47478107.jpg?v=1714660360"},{"product_id":"grid-switch-cover-marked-waste-disposal-white","title":"Grid Switch Cover Marked 'Waste Disposal' - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge grid switch cover is a white ABS rocker pre-printed with 'WASTE DISPOSAL' in black text, designed to clip onto Knightsbridge modular grid switches as a replacement or upgrade for blank rocker covers. The rocker measures 33mm high by 16mm wide and projects 6.8mm from the grid faceplate when fitted.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchens where multiple appliances share a single grid switch plate, the pre-printed designation helps distinguish the waste disposal unit switch from adjacent outlets for washing machines, dishwashers or other hardwired appliances. The rocker is removable without tools — it clips off the switch mechanism and a new rocker clips on, allowing designations to be changed if appliance layout changes during a kitchen refit.\u003c\/p\u003e\n\u003cp\u003eThe white ABS construction matches standard white grid faceplates and carries an IP20 rating for indoor dry-location use. Knightsbridge grid covers are compatible across the Knightsbridge modular grid range, which includes single-module switches, double-pole switches and blanking modules that fit into grid plates from 1 to 6 modules wide.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3905906_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this rocker compatible with all grid switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis rocker is designed for Knightsbridge modular grid switches. It clips onto the switch mechanism used across the Knightsbridge grid range. It may not fit grid systems from other manufacturers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the rocker be removed and replaced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The rocker clips off the switch mechanism without tools and a different rocker clips back on. This allows you to change the designation if your appliance layout changes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other designations are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces pre-printed rockers for common kitchen appliances including Washing Machine, Dishwasher, Cooker, Hob, Extractor and others. Use the search function to find other designations in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293558104331,"sku":"GDWASTEU","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/460154_4bb248d5-a1a2-4dde-b0a3-c9d3f5385fea.jpg?v=1714660365"},{"product_id":"knightsbridge-grid-switch-cover-marked-wine-cooler-matt-white","title":"Knightsbridge Grid Switch Cover Marked 'Wine Cooler' - Matt White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge grid switch cover is a replacement rocker marked 'Wine Cooler' in grey print on a matt white ABS surface. The rocker clips onto standard Knightsbridge grid switches in place of the blank cover, allowing switches controlling dedicated appliances to be labelled at installation rather than relying on handwritten labels or stickers that peel over time.\u003c\/p\u003e\n\u003cp\u003eDesigned for use in kitchens where wine coolers or wine fridges are hard-wired to a dedicated switch, the pre-printed cover identifies the switch function without guesswork. The rocker fits any Knightsbridge grid switch module that accepts standard 16mm wide covers, and removing the existing blank cover requires no tools—simply lever the old rocker off and clip the new one into place.\u003c\/p\u003e\n\u003cp\u003eThe matt white finish matches Knightsbridge's standard grid plate finishes and other matt white accessories, maintaining a consistent look across a multi-gang grid installation. The ABS construction provides IP20 rated protection and carries Knightsbridge's 25-year warranty against manufacturing defects. The 33mm height and 16mm width dimensions are standard across Knightsbridge's grid rocker range, ensuring compatibility with all grid switch modules in the same family.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3905915_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich grid switches does this rocker fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cover fits any Knightsbridge grid switch module that accepts standard 16mm wide rocker covers. This includes single-pole, double-pole, intermediate and retractive grid switches in the Knightsbridge grid range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the old rocker removed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLever the existing rocker cover off the switch module using a small flat-blade screwdriver or fingernail at the base of the rocker. The new rocker clips into place without tools—simply align the clips on the back of the rocker with the module frame and press until it clicks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the rocker be removed and refitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The rocker can be removed and re-clipped multiple times without damaging the switch module or the rocker itself, which is useful if you need to change appliance designations or repaint around the switch plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other appliance labels are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces grid switch covers pre-printed with a range of common appliance designations including 'Washing Machine', 'Dishwasher', 'Tumble Dryer', 'Fridge', 'Freezer', 'Cooker', 'Boiler', 'Immersion', and others. Use the search function at Niori to find other variants in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293558595851,"sku":"GDWINEMW","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/460180_e884ae2e-9b6c-4ed2-98de-7ab285b3d84a.jpg?v=1714660375"},{"product_id":"grid-switch-cover-marked-coffee-machine-white","title":"Grid Switch Cover Marked 'Coffee Machine' - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge grid switch cover is a white ABS replacement rocker cap pre-printed with the text 'COFFEE MACHINE' in dark grey sans-serif lettering. The cover clips onto standard Knightsbridge grid rocker switches, replacing the blank rocker supplied with the switch module to add clear appliance identification at the wall plate.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchens, break rooms and hospitality installations where multiple appliances are controlled from a grid plate, the printed label removes ambiguity about which switch operates which appliance. The cover fits all standard Knightsbridge grid rockers (sold separately) and can be swapped without removing the grid plate or back box. The white finish matches standard white grid frames and plates.\u003c\/p\u003e\n\u003cp\u003eThe ABS construction gives the rocker the same UV stability and impact resistance as the underlying switch module, so the printed text does not fade or wear under normal use. The 33mm height and 16mm width are standard dimensions for grid rockers, and the 6.8mm projection sits flush with typical grid frames once clipped into place. The IP20 rating confirms protection against solid objects larger than 12.5mm but not against moisture, making this suitable for dry indoor locations only.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3905923_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this include the switch itself?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a replacement rocker cover only. You need a separate Knightsbridge grid rocker switch module, which is sold separately. The cover clips onto the rocker mechanism once the switch module is installed in the grid frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this with non-Knightsbridge grid systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cover is designed for Knightsbridge grid rockers and may not fit other manufacturers' grid systems. Check compatibility before ordering if your existing grid plate is not Knightsbridge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I swap the rocker cover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePull the existing rocker cover off the switch mechanism (it clips on) and press the new pre-printed cover into place. No tools are needed and the grid plate does not need to be removed from the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other labels are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces grid rocker covers pre-printed with labels including 'Washing Machine', 'Dishwasher', 'Cooker', 'Immersion', 'Water Heater' and others. Search for Knightsbridge grid covers at Niori to see the full range in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293558726923,"sku":"GDCOFFU","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/460208_5cf6efc4-2bfa-4531-af19-d3aa764f9d97.jpg?v=1714660379"},{"product_id":"knightsbridge-grid-switch-cover-marked-coffee-machine-matt-white","title":"Knightsbridge Grid Switch Cover Marked Coffee Machine - Matt White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge grid switch cover rocker is a replacement cover pre-printed with 'COFFEE MACHINE' in grey sans-serif text on a matt white ABS face. The rocker clips onto standard Knightsbridge grid switches, replacing the blank rocker supplied with the switch mechanism to label dedicated appliance circuits in kitchens, staff rooms and hospitality settings.\u003c\/p\u003e\n\u003cp\u003eDesigned for labelling fixed appliance outlets in commercial kitchens, office breakout spaces and domestic utility rooms, the marked rocker removes ambiguity over which switch controls which appliance when multiple switches sit side-by-side in a grid installation. The matt white finish matches Knightsbridge's white grid switch range and integrates cleanly into white-on-white kitchen installations without contrasting edges or visible seams once clipped in place.\u003c\/p\u003e\n\u003cp\u003eThe rocker measures 33mm high by 16mm wide with a 6.8mm projection from the grid faceplate, matching the dimensions of standard Knightsbridge grid switch rockers. The ABS body with steel spring mechanism gives the rocker a positive click action and the IP20 rating suits indoor installations away from moisture. The 25-year warranty covers mechanical failure of the rocker mechanism under normal domestic or light commercial use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3905933_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Knightsbridge switches does this rocker fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis rocker fits all standard Knightsbridge grid switches in the white finish range. It replaces the blank rocker supplied with the switch mechanism by clipping onto the same mounting points on the grid module.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the rocker be removed and re-fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The rocker clips on and off the grid switch mechanism, allowing it to be removed for cleaning or replaced with a different designation rocker without rewiring the switch itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other designations are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces grid switch rockers pre-printed with common appliance designations including Washing Machine, Dishwasher, Fridge Freezer, Cooker, Boiler, Immersion Heater and others. Use the search function at Niori to find other marked rockers in stock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the text permanent or does it wear off?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe text is screen-printed onto the ABS surface during manufacture rather than being a surface sticker. Under normal use the print is durable, though repeated cleaning with abrasive materials or strong solvents may fade the grey text over time.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293558989067,"sku":"GDCOFFMW","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/460216_e7d6aecd-a607-447b-bccb-a62a7dc18b8c.jpg?v=1714660387"},{"product_id":"grid-switch-cover-marked-wine-cooler-white","title":"Grid Switch Cover Marked 'Wine Cooler' - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge grid switch cover is a white ABS rocker marked 'WINE COOLER' in black print, designed to replace the plain rocker on a standard grid switch. The cover clips onto 20A DP grid switches used for appliance circuits, allowing the outlet to be clearly labelled at the point of use rather than relying on back-of-board labelling or memory.\u003c\/p\u003e\n\u003cp\u003eUsed in kitchens, utility rooms and hospitality fit-outs where multiple appliances share a bank of switches, pre-printed covers reduce confusion and make it easier for occupants to isolate specific appliances for maintenance or emergency shutdown. The cover is compatible with Knightsbridge Grid and Grid Pro ranges, and fits standard 20A double-pole grid switches from other manufacturers using the same rocker profile.\u003c\/p\u003e\n\u003cp\u003eThe white ABS construction matches standard white grid plates and the IP20 rating suits dry indoor environments. The rocker measures 33mm high by 16mm wide with a 6.8mm projection from the switch mounting frame. The print is black ink on white, providing high contrast for readability in typical ambient kitchen lighting.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3905953_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat switches is this compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cover fits standard 20A DP grid switches from the Knightsbridge Grid and Grid Pro ranges, and most other manufacturers' grid switches using the same rocker profile. It will not fit traditional plate switches or screwless switches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the rocker replaced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe existing plain rocker clips off the front of the grid switch module and the new pre-printed rocker clips on in its place. No tools or re-wiring are needed, but the circuit should be isolated before removing or replacing the rocker.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the print wear off?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe black print is applied to the ABS surface and can fade or wear over time with repeated finger contact, especially in high-traffic hospitality environments. Wipe gently with a dry cloth rather than abrasive cleaning products to extend the life of the print.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293559283979,"sku":"GDWINEU","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/460224_95b5ff65-4d75-4c41-bbc5-cfe230fe0b39.jpg?v=1714660394"},{"product_id":"grid-switch-cover-marked-warming-drawer-matt-white","title":"Grid Switch Cover Marked 'Warming Drawer' - Matt White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge grid switch cover is a replaceable rocker printed with 'Warming Drawer' in grey text on a matt white background. The cover clips onto compatible Knightsbridge grid switch modules, allowing kitchens and utility rooms to label individual appliance circuits without replacing the entire switch plate.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with Knightsbridge's modular grid switch system, the cover fits any standard 20A double-pole grid switch module used to control hardwired appliances such as warming drawers, dishwashers, ovens and washing machines. The rocker can be removed and replaced without disconnecting power or removing the faceplate from the wall, making it straightforward to relabel circuits when appliances are replaced or relocated.\u003c\/p\u003e\n\u003cp\u003eThe matt white finish matches white and off-white grid plates and provides a neutral backdrop for the printed text. Constructed from ABS plastic with a steel rocker mechanism, the cover carries an IP20 rating for dry indoor use and a 25-year warranty. Dimensions are 33mm height, 16mm width and 6.8mm projection when fitted to the grid module.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3906191_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Knightsbridge grid switches does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cover fits all standard Knightsbridge 20A double-pole grid switch modules. It does not fit standard plate switches or non-grid format switches from other manufacturers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the rocker be changed without disconnecting power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The rocker cover clips onto the underlying switch module and can be removed and replaced while the circuit remains live, though it is safer to isolate the circuit at the consumer unit before making any changes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other appliance labels are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces grid switch covers pre-printed with Dishwasher, Washing Machine, Tumble Dryer, Oven, Hob, Extractor, Fridge Freezer and other common appliance designations. Use the site search to find other variants in stock at Niori.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It is rated IP20, so it is for dry rooms only.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293559677195,"sku":"GDWARMMW","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/460238_3e81f579-c827-44b7-b584-743c37113404.jpg?v=1714660404"},{"product_id":"grid-switch-cover-marked-warming-drawer-white","title":"Grid Switch Cover Marked 'Warming Drawer' - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge grid switch cover is a white ABS rocker printed with the marking 'WARMING DRAWER', designed to replace the blank rocker on a standard grid switch or socket module. The cover measures 33mm high by 16mm wide with a 6.8mm projection from the grid plate, matching the dimensions of standard Knightsbridge grid rocker switches.\u003c\/p\u003e\n\u003cp\u003eUsed in kitchens where multiple appliances are controlled from a bank of grid switches, the printed marking identifies which switch controls the warming drawer without needing to test or label each outlet manually. The cover clips onto the existing rocker mechanism, replacing the unmarked rocker supplied with the grid switch. No rewiring or additional installation is required beyond removing the existing rocker and clipping the replacement into place.\u003c\/p\u003e\n\u003cp\u003eThe white ABS construction matches Knightsbridge's white grid switch and socket ranges, maintaining a consistent finish across a multi-gang grid plate. The IP20 rating suits standard dry indoor installations. Knightsbridge backs this component with a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3906193_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat grid switches does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis cover fits Knightsbridge's standard grid rocker switches with 33mm x 16mm rocker dimensions. It is compatible with most Knightsbridge grid switch modules, including single-pole, double-pole and intermediate switches in the grid range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the cover fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe existing blank rocker on the grid switch can be removed by hand or with a small flat-blade screwdriver to release the clips. The replacement printed rocker then clips into the same mounting points. No tools or rewiring are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the marking be customised?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis cover is supplied pre-printed with 'WARMING DRAWER' and cannot be customised. Knightsbridge produces a range of other pre-printed covers for common appliances (dishwasher, washing machine, cooker, etc.) which can be found by searching the Niori catalogue.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293559775499,"sku":"GDWARMU","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/460242_2f16a6a9-4388-43f2-a335-447fb58cdf1e.jpg?v=1714660409"},{"product_id":"13a-1-gang-sp-switched-socket-dual-usb-a-usb-c-matt-white-screwless-white-insert","title":"13A 1 Gang SP Switched Socket Dual USB-A \u0026 USB-C - Matt White Screwless (White Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang SP switched socket combines a single 13A outlet with one USB-A and one USB-C charging port behind a matt white screwless faceplate with a white insert. The USB-C port delivers up to 18W on its own and up to 20W total output (5V DC, 4.0A shared) when both ports are charging simultaneously, supporting fast-charge protocols including PD (Power Delivery) and QC (Quick Charge).\u003c\/p\u003e\n\u003cp\u003eDesigned for residential kitchens, bedrooms, offices and hospitality installations where both mains power and USB charging are needed at a single wall point, the socket fits a 35mm minimum back box depth and uses a screwless cover plate that clips onto a separate metal sub-frame. This means there are no visible screws or fixings on the wall once installed. The matt white finish and white insert create a monochrome surface that blends with painted walls and light-toned interiors.\u003c\/p\u003e\n\u003cp\u003eThe socket is built to Over Voltage Category III (OVC III) standards for domestic and commercial use, with built-in protection against overload, overheating and excessive current. Adaptive charging automatically selects the correct voltage for the connected device, and the charger draws just 0.1W in standby mode to meet ErP energy efficiency requirements. The FASTCHARGE technology can take compatible devices from 0-50% charge in approximately 30 minutes, then reverts to standard charging parameters above 70% to preserve long-term battery health. A 10mm spacer is included to simplify fitting in various back box configurations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFastcharge\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3918489_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1295704.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 35mm minimum back box depth is needed for safe installation. A 10mm spacer is included to accommodate different back box configurations. The screwless cover plate adds approximately 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between SP and DP switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSP (single pole) switching isolates the live line only when the socket is switched off. DP (dual pole) switching isolates both live and neutral. For most domestic applications SP switching is sufficient, but DP is preferred for high-draw appliances or commercial installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe USB-C port provides up to 18W on its own. When both USB-A and USB-C ports are charging simultaneously, the total output is 20W at 5V DC (4.0A shared). The socket supports PD and QC fast-charge protocols and uses adaptive charging to select the correct voltage for each device.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293560561931,"sku":"SFR9919MW","price":41.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/470918_312ba599-c28e-4e2c-b299-395c7a173ca5.jpg?v=1714660420"},{"product_id":"120-pir-sensor-module-with-override-50x50mm-white","title":"120° PIR Sensor Module with Override 50x50mm - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge NETPIRSWH is a 50x50mm PIR sensor module with manual override, designed to fit euro modular frames accepting 50mm square inserts. The passive infrared sensor detects movement across a 120° field up to five metres away, switching connected lighting on when motion is detected and ambient light levels are low.\u003c\/p\u003e\n\u003cp\u003eDesigned for hallways, stairwells, WCs, utility rooms and commercial corridors where automated lighting reduces energy waste, the module uses a three-minute time delay that switches the light off after the last detected movement. The override button on the front faceplate switches between AUTO (sensor-controlled) and ON (permanent light) modes, allowing manual control when continuous illumination is needed without triggering the sensor repeatedly.\u003c\/p\u003e\n\u003cp\u003eThe white polycarbonate construction gives a clean finish against white or light-toned walls and matches standard white modular switch ranges. The module is rated for loads up to 100W LED or 200W incandescent, making it compatible with most residential and light commercial lighting circuits. Installation requires a 47mm minimum back box depth and standard live and neutral wiring. The sensor lens sits slightly recessed behind the faceplate to reduce accidental contact.\u003c\/p\u003e\n\u003cp\u003eThis module requires a separate modular faceplate (sold separately) to complete the installation. Knightsbridge modular faceplates are available in a range of finishes including polished chrome, brushed chrome, polished brass, matt black and white to match other switches and sockets in the same room.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3918584_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is needed for safe installation. The module itself has a recessed depth of 40mm, with the remaining space accommodating wiring and connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this include a faceplate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is the sensor module only. You need to purchase a compatible euro modular faceplate separately to complete the installation. Knightsbridge produces modular faceplates in multiple finishes to match your other switches and sockets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the override function work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe small button on the front switches between AUTO mode (sensor-controlled, light comes on with movement) and ON mode (light stays on continuously). Press once to override AUTO; press again to return to sensor control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the detection range and timer setting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe sensor covers a 120° field up to five metres away. After the last detected movement, the light remains on for three minutes before switching off automatically. The timer duration is pre-set and not adjustable on this model.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293560725771,"sku":"NETPIRSWH","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/738060_9c3c572c-4fa4-4f04-bc00-e5ee4ec2415a.jpg?v=1714660425"},{"product_id":"4-gang-13a-dp-switched-socket-multimedia-combination-plate-matt-white-screwless-8-module-apertures","title":"4 Gang 13A DP Switched Socket Multimedia Combination Plate - Matt White Screwless (8 Module Apertures)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge multimedia combination plate provides four 13A double-pole switched sockets alongside two apertures sized for eight Euro module inserts (25 x 50mm), combining mains power and signal distribution in a single 297.5 x 179.5mm screwless faceplate. The matt white finish covers a premium-grade steel sub-frame, with a matching white insert behind the apertures.\u003c\/p\u003e\n\u003cp\u003eDesigned for home offices, AV walls, kitchens requiring both power and data\/AV connectivity, and new-build or renovation projects where cable runs for mains and low-voltage signals converge at a single point. The plate accepts Knightsbridge Euro modules including HDMI, satellite, networking (Cat6), USB charging, speaker terminals, phone line, and coaxial connections, allowing each installation to be configured to the specific signal needs of the room. All four socket outlets carry double-pole switching, isolating both live and neutral when switched off.\u003c\/p\u003e\n\u003cp\u003eThe screwless cover plate clips onto the steel sub-frame, which is fixed to a 35mm minimum back box (deeper boxes recommended where multiple cables terminate behind the plate). The matt white finish provides a low-glare neutral surface that sits comfortably in white or light-toned interiors without the reflective contrast of polished finishes. The 4.5mm projection from the wall once fitted keeps the plate profile minimal. Each of the four sockets is rated at 13A, handling up to 3,120W per outlet on 230V mains.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e179.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e297.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e21.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4140549_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292792.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe minimum back box depth is 35mm, but a deeper box (47mm or dual-box) is recommended where multiple mains cables and low-voltage signal cables terminate behind the plate. The recessed depth of the plate itself is 21.2mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat Euro module inserts fit the apertures?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe plate accepts standard 25 x 50mm Euro modules. Knightsbridge produces modules for HDMI, satellite F-type, Cat6 networking, USB charging, 3.5mm audio, speaker terminals, coaxial, and phone line. Up to eight single-width modules or four double-width modules can be fitted across the two apertures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the modules included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The plate is supplied with blanking inserts covering the module apertures. Euro modules are sold separately, allowing each installation to be configured to the specific signal requirements of the room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The matt white cover plate clips onto the steel sub-frame and can be removed for painting or decorating around the socket, then re-clipped without re-wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293594411275,"sku":"SFR298MW","price":48.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/776048_5f0a2368-d8e0-4d24-9fad-c6ead17659f0.jpg?v=1714660933"},{"product_id":"13a-switched-fused-spur-with-neon-flex-outlet-matt-white-screwless","title":"13A Switched Fused Spur With Neon \u0026 Flex Outlet - Matt White Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A switched fused spur with neon indicator and flex outlet is a dedicated hardwired control unit for fixed appliances such as kitchen extractors, wall-mounted heaters, and washing machines. The rocker switch isolates the circuit, the red neon indicator shows when power is live, and the flex outlet at the base allows the appliance cable to exit cleanly without needing a separate knockout or grommet.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation above worktops, behind appliances, or in utility rooms where a fused spur is required by Part P building regulations, the unit fits a standard 25mm minimum back box depth. The screwless cover plate clips onto a metal sub-frame fixed to the back box, giving a clean finish without visible screws or fixings on the wall once installed. The internal fuse holder accepts standard 13A or lower-rated cartridge fuses depending on the appliance load.\u003c\/p\u003e\n\u003cp\u003eThe matt white finish is a low-sheen powder-coated steel that resists fingermarks and blends with white or off-white walls in kitchens and utility spaces. The screwless plate uses a built-in gasket between the cover and sub-frame to prevent dirt ingress at the edge. At 87.5mm square and 4.3mm projection from the wall, the plate sits flush with modern low-profile switches and sockets in the same range. Knightsbridge backs this unit with a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4408185_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1291682.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a fused spur used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA fused spur provides a dedicated switched and fused connection for a fixed appliance such as a kitchen extractor, bathroom heater, or washing machine. The switch allows the appliance to be isolated without turning off the entire circuit at the consumer unit, and the internal fuse protects the appliance from overload. Part P building regulations often require fused spurs for hardwired appliances in kitchens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the neon indicator do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe red neon indicator above the rocker switch glows when the circuit is live, showing that power is available to the appliance even if the switch is in the off position. This allows you to confirm that the circuit is energised without needing a multimeter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the spur and re-clipped without re-wiring. The built-in gasket between cover and sub-frame prevents paint or dirt from entering the gap.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293607485707,"sku":"SF6300FMW","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/720704_7e708dd2-4069-413d-9176-43472dff9788.jpg?v=1714661114"},{"product_id":"grid-switch-cover-marked-fan-boost-matt-white","title":"Grid Switch Cover Marked 'FAN BOOST' - Matt White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge grid switch cover is a replaceable rocker marked 'FAN BOOST' in grey text on a matt white finish. The cover clips onto compatible Knightsbridge grid switches, allowing ventilation controls to be clearly labelled at the point of use. The rocker measures 33mm high by 16mm wide with a 6.8mm projection from the switch plate once fitted.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathroom extractor fans with boost function, the cover identifies the switch controlling the higher-speed fan mode, reducing confusion in multi-switch installations where separate switches control standard extract, boost mode, and lighting. The clip-on design means the cover can be removed and replaced without rewiring or removing the switch mechanism from the wall.\u003c\/p\u003e\n\u003cp\u003eThe matt white ABS construction with an internal steel clip gives a durable, non-reflective finish that sits flush with the switch plate. The IP20 rating suits dry indoor locations. The cover is compatible with Knightsbridge's grid switch range, which uses interchangeable modules and rockers on a common frame system.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4413344_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Knightsbridge switches is this compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis rocker fits Knightsbridge's modular grid switch range, where individual switch modules clip into a common grid frame and accept interchangeable rocker covers. It will not fit standard plate switches or other manufacturers' grid systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the rocker be removed and replaced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The rocker clips onto the switch module and can be pulled off and replaced without removing the switch from the wall or touching any wiring. This allows covers to be changed if room use changes or if a cover becomes damaged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 'FAN BOOST' refer to?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFan boost is a higher-speed setting on bathroom extractor fans, typically used during or after showers to clear moisture quickly. In dual-speed installations, one switch controls normal continuous extraction and a second controls the boost mode. This cover labels the boost switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other markings are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces grid switch covers with a wide range of pre-printed labels including appliance names, room functions, and blank covers. Use the search function or contact us to find specific markings in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293608403211,"sku":"GDBOOSTMW","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/737620_409f5f6f-3a5d-4cff-98b0-057714045839.jpg?v=1714661128"},{"product_id":"grid-switch-cover-marked-fan-boost-white","title":"Grid Switch Cover Marked 'Fan Boost' - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge grid switch cover is a pre-printed white ABS rocker marked 'FAN BOOST', designed to replace the existing cover on a standard Knightsbridge grid switch module. The cover clips onto the rocker mechanism without needing to rewire the switch, allowing installers to add labelling after initial installation or to change labels when a room's use changes.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms and wet rooms where extractor fans run on boost modes, the marked cover helps occupants distinguish the boost control from other switches in a multi-gang grid plate. The cover fits Knightsbridge's modular grid system, which allows multiple switch, socket and data modules to be combined in a single faceplate. The white finish matches standard white grid plates and modules across the Knightsbridge range.\u003c\/p\u003e\n\u003cp\u003eThe cover measures 33mm high by 16mm wide with a 6.8mm projection from the grid plate when fitted, giving a low-profile finish that sits flush with adjacent modules. The ABS and steel construction is rated to IP20, making it suitable for dry internal locations. Knightsbridge backs the component with a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eSmoked Bronze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4413373_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit standard Knightsbridge grid switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover clips onto any standard Knightsbridge grid rocker module. Remove the existing unmarked rocker cover and clip this marked cover into place without needing to disconnect wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cover is rated to IP20, which suits dry internal locations. If the grid plate is positioned outside bathroom zones (typically outside Zone 2, more than 600mm from a water source), it can be used. Check BS 7671 zoning requirements for your specific bathroom layout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other markings are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces grid switch covers with various pre-printed labels including appliance names, lighting zones and ventilation functions. Search the Niori catalogue for 'grid switch cover' to see other markings in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293608665355,"sku":"GDBOOSTU","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/737626_fe7fbba1-6828-432f-b6f7-993c239ffb36.jpg?v=1714661136"},{"product_id":"curved-grid-rocker-cover-laser-printed-fan-boost-white","title":"Curved Grid Rocker Cover - Laser Printed 'Fan Boost' - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge rocker cover is laser-printed with 'Fan Boost' and designed exclusively for the Curved Edge grid switching system. Moulded from white thermoset resin with antimicrobial properties tested to ISO 22196:2011, the rocker cover clips onto Knightsbridge grid modules to replace the standard blank rocker or to re-designate an existing switch function.\u003c\/p\u003e\n\u003cp\u003eSuited to commercial and domestic installations where fan control is required — bathrooms, shower rooms, utility rooms and kitchens with extractor fans. The rocker removes and replaces without removing the grid module from the back box or disconnecting wiring, making it practical to relabel functions during fit-out or refurbishment. The laser-printed text remains readable under repeated contact and does not fade or wear off like adhesive labels.\u003c\/p\u003e\n\u003cp\u003eThe rocker measures 30.6mm high by 15.9mm wide with a 10mm projection from the grid faceplate once fitted. The white finish coordinates with the Curved Edge switches and sockets range and the IP20 rating makes it suitable for general indoor dry areas. The thermoset resin construction withstands typical electrical accessory operating temperatures and the antimicrobial properties reduce surface bacterial growth between cleaning.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e30.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e15.9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eThermoset resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Microbial Properties\u003c\/td\u003e\n\u003ctd\u003e3rd Party Tested to ISO 22196:2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4418790_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1147470.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with standard UK grid systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This rocker is designed exclusively for the Knightsbridge Curved Edge grid switching system. It will not fit standard flat-profile grid modules from other manufacturers or Knightsbridge's own flat grid range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the rocker be changed without removing the grid module?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The rocker clips onto the grid module and can be removed and replaced without disconnecting wiring or removing the module from the back box. This allows function labels to be changed during installation or refurbishment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the antimicrobial property mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe thermoset resin has been tested to ISO 22196:2011, which measures reduction in surface bacterial growth. This is useful in environments where switches are touched frequently, such as kitchens, bathrooms and commercial facilities, reducing bacterial colonisation between cleaning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other designations are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces a range of laser-printed rocker covers for the Curved Edge grid system, including lighting, heating, fan and appliance labels. Use the search function or filter by 'Rocker Covers' to view other designations in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293608730891,"sku":"CUBOOST","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/738132_2aaffbc9-fd1b-4044-a93c-031f559428f4.jpg?v=1714661139"},{"product_id":"curved-grid-rocker-cover-coffee-machine-white","title":"Curved Grid Rocker Cover - Coffee Machine (White)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge rocker cover is laser-printed with 'Coffee Machine' designation and fits the Curved Edge grid system. The cover is made from white thermoset resin with anti-microbial properties tested to ISO 22196:2011, measuring 30.6mm high by 15.9mm wide with a 10mm projection from the grid plate.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial kitchens, staff break rooms, and hospitality installations where multiple appliances need clear labelling at the grid plate, the rocker cover snaps onto any Knightsbridge curved grid switch module without tools. The laser-printed text is permanent and will not rub off with repeated use, unlike adhesive labels or marker pen annotations.\u003c\/p\u003e\n\u003cp\u003eThe white finish coordinates with Knightsbridge's Curved Edge grid range, matching the colour of standard white grid plates. The anti-microbial properties reduce bacterial growth on high-touch surfaces in food service and healthcare environments. The IP20 rating confirms suitability for dry indoor locations. Each rocker cover is sold individually, allowing specific designations to be added or changed as appliances are relocated or replaced.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e30.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e15.9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eThermoset resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Microbial Properties\u003c\/td\u003e\n\u003ctd\u003e3rd Party Tested to ISO 22196:2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4418830_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1147472.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with flat grid plates?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This rocker cover is designed exclusively for Knightsbridge's Curved Edge grid system. It will not fit flat grid plates or standard rocker switches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the rocker cover be removed and replaced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The rocker snaps onto the grid module and can be removed by hand without tools. This allows designations to be changed when appliances are relocated or replaced.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the anti-microbial properties?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe thermoset resin includes anti-microbial additives tested to ISO 22196:2011, which reduce bacterial growth on the surface. This is particularly useful in food service and healthcare environments where switches are touched frequently.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other designations are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces a range of laser-printed rocker covers for the Curved Edge grid system, including designations for common appliances and room functions. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293608796427,"sku":"CUCOFF","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/738138_48237188-486e-4464-96aa-2419b47bf871.jpg?v=1714661142"},{"product_id":"curved-grid-rocker-cover-laser-printed-wine-cooler-white","title":"Curved Grid Rocker Cover - Laser Printed 'Wine Cooler' White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Curved Grid rocker cover is a white thermoset resin replacement cover laser-printed with 'Wine Cooler' text, designed to clip onto Curved Edge grid switch modules. The cover measures 30.6mm high by 15.9mm wide and projects 10mm from the wall when fitted, matching the curved profile of the Knightsbridge grid range.\u003c\/p\u003e\n\u003cp\u003eDesigned for hospitality, restaurant, commercial kitchen and residential wine storage installations, the rocker cover allows clear labelling of dedicated wine cooler appliance circuits within a multi-gang grid plate. The laser-printed text is permanent and will not rub off with repeated use. The cover clips directly onto the rocker mechanism of any Curved Edge grid switch module, replacing the blank cover supplied with the switch.\u003c\/p\u003e\n\u003cp\u003eThe white thermoset resin construction carries anti-microbial properties tested to ISO 22196:2011, making it suitable for food service and commercial kitchen environments where hygiene standards are maintained. The IP20 rating confirms it is designed for dry indoor locations. The cover is compatible only with Knightsbridge Curved Edge grid modules and will not fit onto standard flat grid plates or conventional modular switches.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e30.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e15.9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eThermoset resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Microbial Properties\u003c\/td\u003e\n\u003ctd\u003e3rd Party Tested to ISO 22196:2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4418832_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1147540.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with standard grid switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This rocker cover fits only Knightsbridge Curved Edge grid modules. It will not fit onto flat grid plates or conventional modular switches from other ranges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the cover be changed after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The rocker cover clips onto the switch mechanism and can be removed and replaced with a different designation without rewiring the switch. This allows circuit labelling to be changed if appliance assignments are altered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other designations are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces a range of laser-printed rocker covers for the Curved Edge grid system, including common appliance labels for kitchen, hospitality and commercial installations. Use the search function to find other designations in stock at Niori.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the text durable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe text is laser-printed directly into the thermoset resin and will not rub off with repeated use. The anti-microbial properties are tested to ISO 22196:2011, confirming the material is suitable for environments requiring regular cleaning.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293608829195,"sku":"CUWINE","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/738152_22a36325-f5bf-48ef-9884-e02aef496c64.jpg?v=1714661144"},{"product_id":"warming-drawer-rocker-cover-white-laser-printed-for-curved-grid-system","title":"Warming Drawer Rocker Cover - White Laser Printed for Curved Grid System","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge rocker cover is laser printed with 'WARMING DRAWER' on a white thermoset resin body measuring 30.6mm high by 15.9mm wide. It clips onto Curved Edge grid switch modules in place of a blank or differently-labelled rocker, allowing modular grid plates to be reconfigured for different appliance designations without rewiring.\u003c\/p\u003e\n\u003cp\u003eDesigned for domestic kitchens, hospitality kitchens and commercial premises using Knightsbridge Curved Edge grid systems, the rocker cover lets installers label grid positions for specific appliances during fit-out and swap them later if the room layout changes. The laser-printed text is permanent and won't fade or rub off under repeated switching.\u003c\/p\u003e\n\u003cp\u003eThe thermoset resin construction is impact-resistant and carries anti-microbial properties tested to ISO 22196:2011, making it suitable for environments where hygiene matters. The IP20 rating is appropriate for dry indoor locations. The rocker cover is compatible only with Knightsbridge Curved Edge grid modules, not with flat grid systems or standard rocker switches from other ranges.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e30.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e15.9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eThermoset resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Microbial Properties\u003c\/td\u003e\n\u003ctd\u003e3rd Party Tested to ISO 22196:2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4418833_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1147536.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with standard grid switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This rocker cover works only with Knightsbridge Curved Edge grid modules. It will not fit flat grid systems or standard rocker switches from other Knightsbridge ranges or other manufacturers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the printed label be changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 'WARMING DRAWER' text is laser-printed and permanent. To change the designation, remove this rocker cover and replace it with a different laser-printed rocker from the Knightsbridge Curved Edge range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP20 mean for this product?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP20 means the rocker cover is protected against solid objects larger than 12.5mm but has no water ingress protection. It is suitable for dry indoor locations only, not bathrooms or outdoor installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the anti-microbial properties?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe thermoset resin is treated with an anti-microbial agent and tested to ISO 22196:2011. This reduces bacterial growth on the surface, making it suitable for commercial kitchens, healthcare environments and hospitality settings where hygiene standards are monitored.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293608894731,"sku":"CUWARM","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/738146_be754bb2-8ce5-4c5e-a85a-68bb7e56cf7d.jpg?v=1714661146"},{"product_id":"waste-disposal-rocker-cover-white-curved-edge-grid","title":"Waste Disposal Rocker Cover - White Curved Edge Grid","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge rocker cover is laser-printed with 'WASTE DISPOSAL' and designed to fit the Curved Edge modular grid switch system. Made from white thermoset resin, the rocker measures 30.6mm high by 15.9mm wide and replaces the standard blank rocker on any Knightsbridge curved grid module to label the waste disposal control clearly.\u003c\/p\u003e\n\u003cp\u003eIntended for kitchens where a waste disposal unit is wired to a grid switch, the rocker clips onto the module without tools and can be swapped out if the switch designation changes. The curved profile matches the Knightsbridge Curved Edge Switches and Sockets range, providing a consistent appearance across installations. The white finish coordinates with white grid faceplates and frontplates.\u003c\/p\u003e\n\u003cp\u003eThe thermoset resin construction carries antimicrobial properties tested to ISO 22196:2011, making it suitable for hygienic environments including domestic kitchens, care homes and hospitality kitchens. The IP20 rating confirms the rocker is designed for dry indoor use only. Knightsbridge backs this rocker with a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e30.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e15.9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eThermoset resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Microbial Properties\u003c\/td\u003e\n\u003ctd\u003e3rd Party Tested to ISO 22196:2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4418835_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1147542.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich grid system does this rocker fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis rocker is designed exclusively for the Knightsbridge Curved Edge grid system. It will not fit flat-profile grids or standard rocker switches from other manufacturers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the rocker be changed after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The rocker clips onto the grid module and can be removed and replaced with a different designation without re-wiring or removing the grid plate from the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the antimicrobial testing mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe thermoset resin has been third-party tested to ISO 22196:2011, confirming it inhibits bacterial growth on the surface. This makes it suitable for kitchens, care environments and commercial settings where hygiene is a priority.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other rocker designations are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces laser-printed rockers for common kitchen and utility applications including Cooker, Hob, Immersion Heater, Boiler, and others. Search 'Knightsbridge rocker cover' at Niori to see the full range in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293609091339,"sku":"CUWASTE","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/738150_8b57ee9d-a738-408b-8165-bc03f56627db.jpg?v=1714661148"},{"product_id":"curved-grid-rocker-cover-laser-printed-fridge-white","title":"Curved Grid Rocker Cover - Laser Printed 'Fridge' - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge curved grid rocker cover is a replacement rocker module for Curved Edge grid switch systems, laser-printed with 'FRIDGE' designation. Made from white thermoset resin, the rocker measures 30.6mm high by 15.9mm wide and snaps onto a standard Curved Edge grid module to replace a blank or differently labelled rocker.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchen installations where appliances are controlled via grid switches, the rocker allows quick identification of the fridge circuit among multiple switches in a single grid plate. The laser-printed text is permanent and will not fade or rub off with repeated use. The rocker can be removed and replaced without tools by pulling it forward from the grid module, allowing labels to be changed if appliances are relocated or circuits reassigned.\u003c\/p\u003e\n\u003cp\u003eThe white thermoset resin construction includes anti-microbial properties tested to ISO 22196:2011, making the rocker suitable for commercial kitchens, care homes and food preparation areas where surface hygiene matters. The IP20 rating confirms protection against solid objects larger than 12.5mm, and the rocker carries a 25-year warranty. It is compatible only with Knightsbridge Curved Edge grid systems — it will not fit other grid ranges or standard rocker switches.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e30.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e15.9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eThermoset resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Microbial Properties\u003c\/td\u003e\n\u003ctd\u003e3rd Party Tested to ISO 22196:2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4418836_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1147484.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with standard grid systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This rocker is designed exclusively for Knightsbridge Curved Edge grid modules. It will not fit standard flat-edge grid systems or other manufacturers' grids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the rocker be removed and reused?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The rocker pulls forward off the grid module without tools and can be re-fitted to a different module or replaced with another designation if needed. This allows circuits to be relabelled without replacing the entire grid plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the anti-microbial rating mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe thermoset resin has been tested to ISO 22196:2011, which measures the ability of a surface to inhibit bacterial growth. This makes the rocker suitable for environments where hygiene is a concern, such as commercial kitchens and care facilities.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other designations are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces a range of laser-printed rockers for the Curved Edge grid system, including common appliance labels (cooker, oven, extractor), room labels, and blank rockers. Use the search function or filter by 'Rocker Covers' to see the full range in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293609189643,"sku":"CUFRIDGE","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/738144_f67edca9-cc54-44e1-9760-2c9efbf8218c.jpg?v=1714661150"},{"product_id":"curved-grid-rocker-cover-laser-printed-freezer-white","title":"Curved Grid Rocker Cover - Laser Printed FREEZER - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge curved grid rocker cover is a replacement module for the Curved Edge Grid Switch system, laser-printed with the word FREEZER in capital letters. The rocker is moulded from white thermoset resin with anti-microbial properties tested to ISO 22196:2011, making it suitable for kitchens, care facilities and food preparation areas where hygiene is critical.\u003c\/p\u003e\n\u003cp\u003eDesigned to fit Knightsbridge's modular curved grid plates, the rocker clips into place on a grid module already installed behind a faceplate, allowing the designation to be changed without rewiring or removing the grid plate from the wall. The 15.9mm width corresponds to a single-module position on a standard grid plate, and the 10mm projection from the plate surface gives a tactile switch action.\u003c\/p\u003e\n\u003cp\u003eThe laser-printed designation is permanent and will not fade or rub off under repeated use. The white finish coordinates with Knightsbridge's Curved Edge white grid plates and accessories, creating a consistent appearance across a multi-module installation. The IP20 rating limits use to dry indoor locations — the rocker is not suitable for bathrooms or outdoor installations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e30.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e15.9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eThermoset resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Microbial Properties\u003c\/td\u003e\n\u003ctd\u003e3rd Party Tested to ISO 22196:2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4418838_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1147480.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with all Knightsbridge grid systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This rocker is designed specifically for the Curved Edge Grid system. It will not fit the Square Edge Grid system or standard rocker switches. Confirm your existing grid plate style before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the rocker be replaced without removing the grid plate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The rocker clips onto the grid module behind the faceplate and can be removed and replaced without disconnecting wiring or removing the plate from the wall. This allows designations to be updated as room use changes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other designations are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces curved grid rocker covers in a range of laser-printed designations including LIGHTS, HEATING, COOKER, IMMERSION, BELL, and blank rockers. Use the search function to find other variants in stock at Niori.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the anti-microbial coating permanent?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe anti-microbial properties are built into the thermoset resin material itself, not applied as a surface coating. The properties remain active throughout the life of the product and are certified to ISO 22196:2011 by third-party testing.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293609287947,"sku":"CUFREEZER","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/738140_24778ea2-4fff-4aba-9009-ba0bbf157bc4.jpg?v=1714661153"},{"product_id":"13a-2-gang-dp-switched-socket-with-4-module-apertures-matt-white-screwless","title":"13A 2 Gang DP Switched Socket With 4 Module Apertures - Matt White Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SFR194MW is a multimedia combination plate combining one 13A 2-gang double-pole switched socket with four 25x50mm Euro module apertures behind a matt white screwless faceplate. The module apertures accept any standard Euro module insert, allowing AV, data, telecoms and USB charging to be configured alongside mains power in a single wall position.\u003c\/p\u003e\n\u003cp\u003eDesigned for new builds, major renovations and AV installations where multiple signal types need to be terminated alongside mains power, the combination plate simplifies cabling runs and reduces the number of separate wall plates needed. The 2-gang socket provides 13A rated outlets with double-pole switching, and the four module apertures accommodate any combination of HDMI, satellite, Ethernet, telephone, USB-A, USB-C, or blanking modules depending on room requirements.\u003c\/p\u003e\n\u003cp\u003eThe 180mm x 147.5mm faceplate is constructed from premium-grade steel with a matt white powder-coat finish and a white insert behind the apertures. The screwless cover plate clips onto a separate metal sub-frame, hiding all fixings once installed. The plate requires a 47mm back box depth and projects 4.5mm from the wall surface, suitable for standard residential and commercial installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e21.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4419930_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292650.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm back box depth is needed to accommodate the combination plate and module inserts. The screwless cover plate adds 4.5mm projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat module inserts fit the apertures?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe four apertures accept any standard 25x50mm Euro module insert. Knightsbridge produces a range including HDMI, satellite F-type, RJ45 Ethernet, RJ11 telephone, USB-A, USB-C, coaxial, and blanking plates. Modules are sold separately and can be mixed to suit room requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the plate and re-clipped without re-wiring the socket or modules.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the socket outlets be used independently of the module apertures?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 13A socket is fully functional regardless of whether module inserts are fitted to the apertures. Unused apertures can be fitted with blanking modules or left empty depending on installation preference.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293611319563,"sku":"SFR194MW","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/776010_9643bc3c-088d-4d4c-971d-06447355a795.jpg?v=1714661161"},{"product_id":"13a-2-gang-dp-socket-2-gang-modular-combi-plate-matt-white-screwless","title":"13A 2 Gang DP Socket + 2 Gang Modular Combi Plate - Matt White Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge combination plate pairs a 13A 2-gang DP switched socket with two modular insert apertures behind a matt white screwless faceplate. The two 25x50mm euro module slots accept standard Knightsbridge modular inserts for satellite TV, USB charging, HDMI, RJ45 data networking or other AV\/data connections, allowing the plate to be configured to the exact requirements of the installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for living rooms, bedrooms and home offices where mains power and media\/data connections are needed at a single wall location, the combination plate consolidates what would otherwise require two separate faceplates into one 235mm-wide unit. The dual-pole switching on the socket isolates both live and neutral lines when off, providing additional safety over single-pole switching. The 35mm minimum back box depth requirement suits standard 2-gang dry-lining boxes and surface-mount back boxes.\u003c\/p\u003e\n\u003cp\u003eThe matt white finish provides a clean, low-sheen surface that works across contemporary and traditional interiors without the reflective glare of gloss white. The screwless cover plate clips onto a separate steel sub-frame fixed to the back box, concealing all fixings once installed. The twin earth terminals on the socket side provide safe earthing for both outlets, and the premium-grade steel construction carries a 25-year warranty from Knightsbridge.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e235 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e21.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4420202_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292564.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat modular inserts fit the 2-gang aperture?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe plate accepts any standard 25x50mm euro module inserts. Knightsbridge produces modular inserts for satellite TV, USB-A, USB-C, HDMI, RJ45 data networking, 3.5mm audio, and blank plates. The two slots allow any combination of two inserts to be fitted during installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the modular inserts included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The combination plate is supplied as a socket and faceplate with two empty modular apertures. Modular inserts are sold separately and can be selected based on the specific AV\/data requirements of the room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 35mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.5mm projection from the wall once fitted, with the main body recessing 21.2mm into the back box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The matt white cover plate clips onto a separate steel sub-frame that is fixed to the back box. The cover can be removed for painting around the socket and re-clipped without disturbing the wiring or the installed modular inserts.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293611811083,"sku":"SFR192LMW","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/776014_01a2f127-47f3-4b34-856a-cd91a915f980.jpg?v=1714661177"},{"product_id":"13a-2-gang-dp-socket-2-gang-modular-combination-plate-matt-white-screwless-white-insert","title":"13A 2 Gang DP Socket + 2 Gang Modular Combination Plate - Matt White Screwless (White Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SFR192RMW combines a 13A 2-gang DP switched socket with a 2-gang modular aperture on a single matt white screwless faceplate. The socket occupies the right-hand side of the plate, while the left-hand side accepts two standard Euro module inserts for AV, data or telecom connections.\u003c\/p\u003e\n\u003cp\u003eDesigned for AV installations in living rooms, bedrooms and offices where power and signal connections need to sit side-by-side, the combination plate eliminates the need for separate socket and data faceplates. The modular slots accept standard Euro inserts for satellite F-connectors, TV\/DAB aerial coax, RJ45 Ethernet, HDMI, or telephone sockets (modules sold separately). The 35mm minimum back box depth accommodates the socket terminals and the rear of the modular frame in a standard twin-gang mounting box.\u003c\/p\u003e\n\u003cp\u003eThe matt white finish provides a low-sheen surface that minimises fingerprints and glare compared to gloss white plates, and pairs with white or off-white wall colours in contemporary and minimalist interiors. The screwless cover plate clips onto a separate metal sub-frame fixed to the back box, leaving no visible fixings on the wall once installed. The white insert behind the faceplate gives a monochrome appearance across the socket outlets and modular apertures.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e235 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e21.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4420233_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292614.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat modular inserts does this accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2-gang modular section accepts two standard Euro module inserts (50mm × 25mm aperture each). Common inserts include satellite F-connector, TV\/DAB aerial coax, RJ45 Ethernet, HDMI, USB charging modules, and RJ11 telephone sockets. Modules are sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 35mm minimum back box depth is needed to accommodate both the socket terminals and the modular frame rear. A standard twin-gang 35mm metal back box is suitable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the plate and re-clipped without re-wiring the socket or modules.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this without modular inserts?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe modular apertures are open slots — if no inserts are fitted, the apertures remain visible. Blank inserts are available separately if you want to fill unused slots for a cleaner appearance.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293612761355,"sku":"SFR192RMW","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/776022_4449f758-48e0-4193-9be2-3eae8831d0bf.jpg?v=1714661193"},{"product_id":"13a-dp-key-lockable-socket-2-gang-matt-white-screwless-white-insert","title":"13A DP Key Lockable Socket 2 Gang - Matt White Screwless (White Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A DP key lockable socket provides controlled access to mains power behind a matt white screwless faceplate with a white insert. The key-lock mechanism isolates both outlets simultaneously, preventing unauthorised use when locked. Supplied with two keys and a double-pole switch configuration that disconnects both live and neutral lines when operated.\u003c\/p\u003e\n\u003cp\u003eDesigned for hotels, student accommodation, offices, care homes and shared facilities where power access needs to be controlled by staff rather than available to all users. The socket fits a standard 47mm minimum back box depth and uses a screwless cover plate that clips onto a metal sub-frame, leaving no visible fixings on the wall once installed. Both outlets remain rated at 13A when unlocked, handling standard UK appliance loads up to 3,120W per outlet.\u003c\/p\u003e\n\u003cp\u003eThe matt white finish on premium-grade steel gives a low-sheen surface that resists fingerprints and pairs cleanly with white walls and modern interiors. The white insert behind the faceplate hides the back of the cover plate and provides a defined edge to each outlet aperture. At 4.3mm projection from the wall, the socket sits nearly flush with the surface, reducing the risk of damage from trolleys and equipment in corridors and communal areas.\u003c\/p\u003e\n\u003cp\u003eThe key-lock cylinder sits above the outlets and operates a single locking bar that engages both sockets simultaneously. When locked, the shutters remain closed and cannot be opened by inserting a plug. The IP20 rating confirms the socket is suitable for dry indoor locations but not bathrooms, kitchens or outdoor use. Knightsbridge backs the socket with a 25-year warranty covering material and manufacturing defects.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e38.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4529482_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1298842.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the key-lock mechanism work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe key-lock cylinder sits above the two outlets. When locked, a single locking bar engages both sockets simultaneously, keeping the shutters closed so that plugs cannot be inserted. When unlocked, both outlets function as standard 13A sockets. Two keys are supplied with the socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the screwless plate be removed for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere is this socket typically used?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHotels, student accommodation, care homes, offices and shared facilities where power access needs to be controlled by staff. Common locations include corridors, communal areas, meeting rooms and any space where unauthorised appliance use needs to be prevented.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293615448331,"sku":"SFR9LOCKMW","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/908418_691288a1-348d-40c3-a91b-f88a0e8e16a0.jpg?v=1714661228"},{"product_id":"knightsbridge-grid-switch-rocker-cover-matt-white","title":"Knightsbridge Grid Switch Rocker Cover - Matt White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge grid switch rocker cover is a replacement cover piece for modular grid switches, measuring 33mm high by 16mm wide with a 6.8mm projection from the face plate. Made from ABS plastic with a steel internal clip, the cover snaps onto existing grid switch modules, allowing the rocker colour to be changed without rewiring or replacing the entire switch mechanism.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installations where grid switch aesthetics need updating to match redecorated interiors, the rocker cover removes by hand without tools and the replacement cover clips into place over the same switch module. This works across Knightsbridge's grid switch range, making it possible to switch between finishes (matt white, polished chrome, brushed brass, etc.) without touching the electrical connections behind the faceplate.\u003c\/p\u003e\n\u003cp\u003eThe matt white finish provides a clean, neutral appearance that suits contemporary, minimalist and Scandinavian-influenced interiors. The ABS construction is resistant to everyday handling and the internal steel clip gives a secure fit onto the switch module without rattling or loosening over time. Knightsbridge backs this component with a 25-year warranty, reflecting the durability of the materials used.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4674047_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit all Knightsbridge grid switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The rocker cover is compatible with all Knightsbridge modular grid switch modules. It clips onto the existing switch mechanism regardless of the faceplate finish or frame style.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I change the rocker colour without rewiring?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The rocker cover removes from the switch module by hand and the replacement clips on without needing to access the wiring behind the faceplate or remove the grid frame from the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces grid switch rocker covers in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function at Niori to find other finishes in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293632815371,"sku":"GDBLANKMW","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/915720_f0d8db6d-48d6-45c7-aeb5-7506c5a106e4.jpg?v=1714661496"},{"product_id":"32a-1-gang-key-card-switch-matt-white-screwless","title":"32A 1 Gang Key Card Switch - Matt White Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 32A key card switch controls power and lighting in hotel rooms, serviced apartments and student accommodation via insertion of a room card. The switch activates the room's electrical circuits when a card is inserted and cuts power to non-essential circuits 30 seconds after the card is withdrawn, reducing energy consumption when the room is unoccupied.\u003c\/p\u003e\n\u003cp\u003eThe screwless matt white faceplate measures 87.5mm square and clips onto a separate metal sub-frame that fixes to a 47mm minimum back box. The 4.3mm projection from the wall gives a low-profile appearance that suits modern commercial interiors. A backlit pink arrow above the card slot provides visual guidance for card insertion in dark rooms, and the neon indicator confirms when the switch is active.\u003c\/p\u003e\n\u003cp\u003eThe 32A rating handles the combined load of multiple circuits typically found in a hotel room, including lighting, sockets, air conditioning control and bathroom heating. The switch is certified to EN 60669-1 and carries an IP20 rating for indoor use. The matt white finish provides a neutral appearance that integrates with white or light-coloured wall treatments without the reflections of a polished or gloss finish.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e31.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4679088_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_873166.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is needed. The switch has a recessed depth of 31.5mm and the screwless cover plate adds 4.3mm projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the power delay work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen the room card is withdrawn, the switch waits 30 seconds before cutting power to circuits wired through it. This delay allows guests time to exit the room without lights going out immediately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat circuits does it control?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe switch is typically wired to control room lighting, socket circuits, air conditioning control and bathroom heating. It does not usually control safety circuits such as smoke alarms or emergency lighting, which remain powered independently.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the screwless plate be removed for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the switch and re-clipped without re-wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293637337355,"sku":"SFCARDMW","price":30.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/915762_373bff3a-3979-4025-be42-015edfcba07f.jpg?v=1714661580"},{"product_id":"230v-shaver-socket-with-dual-usb-a-usb-c-matt-white-screwless","title":"230V Shaver Socket With Dual USB-A \u0026 USB-C - Matt White Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge shaver socket combines a 230V 20VA shaver outlet with one USB-A and one USB-C charging port behind a matt white screwless faceplate. The shaver outlet operates at 230V only and is certified to EN 61558 for safe bathroom use. The USB ports share a 5V DC 2.4A output for charging toothbrushes, shavers, mobile phones and tablets without needing separate plug adapters.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathroom installation in zone 2, the socket carries an IP41 rating against water ingress from splashes and condensation. The screwless cover plate clips onto a separate metal sub-frame, leaving no visible fixings on the wall once installed. A built-in gasket seals the perimeter of the faceplate against moisture. The 230V shaver outlet is compatible with UK and European shavers and electric toothbrushes rated for single-voltage mains operation.\u003c\/p\u003e\n\u003cp\u003eThe matt white finish pairs cleanly with white ceramic tiles, white sanitary ware and neutral bathroom schemes. The faceplate is constructed from premium-grade steel and measures 147.5mm high by 87.5mm wide, with a projection of just 4.3mm from the wall. A minimum mounting box depth of 47mm is required for installation, and the socket must be earthed via the Class I earth terminal.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4679947_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292354.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom shower area?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP41 rating makes this socket suitable for bathroom zone 2, which is outside the immediate shower enclosure and bath area. It cannot be installed in zone 0 (inside a bath or shower tray) or zone 1 (directly above a bath or shower tray to a height of 2.25m). Consult BS 7671 wiring regulations or a qualified electrician if unsure which zone applies to your installation position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket provides 5V DC at 2.4A shared between the USB-A and USB-C ports. If both ports are in use simultaneously, the 2.4A total is divided between them. This is sufficient for overnight charging of phones, electric toothbrushes and shavers, but slower than dedicated fast-charge wall adapters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with dual-voltage shavers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a single-voltage 230V shaver socket. It will not work with dual-voltage shavers designed to operate at both 115V and 230V. Check your shaver's rating plate before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum mounting box depth of 47mm is needed to accommodate the socket's recessed depth of 45mm plus clearance for wiring. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293641040139,"sku":"SF8909MW","price":47.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/950840_8c9e1ab5-e242-428a-96ca-f8a9fb824ebd.jpg?v=1714661629"},{"product_id":"20ax-dp-switch-neon-module-white","title":"20AX DP Switch Neon Module - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 20AX DP switch module is a single-gang grid insert that provides double pole switching with a red neon indicator behind a white thermoset resin rocker. Rated at 20AX on 230V mains, the module handles loads up to 4,600W, making it suitable for immersion heaters, water heaters and other high-draw fixed appliances. The neon glows when the circuit is live, providing visual confirmation of status from across the room.\u003c\/p\u003e\n\u003cp\u003eDesigned for curved grid systems only, the module measures 55mm high by 25mm wide and sits within a 35mm minimum depth back box. The front-mounting design allows the module to be clipped into a curved grid plate alongside other compatible modules, creating custom multi-gang configurations to suit specific room layouts. The double pole switching isolates both live and neutral lines when off, providing additional safety for circuits where full isolation is required.\u003c\/p\u003e\n\u003cp\u003eThe white finish coordinates with Knightsbridge's Curved Edge range and is treated with antimicrobial additives tested to ISO 22196:2011, reducing bacterial growth on the surface. The thermoset resin construction provides impact resistance and dimensional stability across temperature changes. The recessed depth of 20mm means the module sits flush within the grid plate once installed, with only the rocker and neon aperture visible from the wall.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e55 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eThermoset resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Microbial Properties\u003c\/td\u003e\n\u003ctd\u003e3rd Party Tested to ISO 22196:2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4796962_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1147520.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the 20AX rating used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 20AX rating indicates the module can handle loads up to 4,600W on 230V mains, making it suitable for high-draw fixed appliances such as immersion heaters, water heaters and electric showers. Standard 10AX switches are rated to 2,300W and are not suitable for these loads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this module be used in standard faceplates?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This module is designed exclusively for Knightsbridge curved grid systems and will not fit standard screw-fixed or screwless faceplates. You need a compatible curved grid plate to house the module.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the neon indicator show?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe neon glows red when the circuit is live, providing visual confirmation that power is flowing to the connected load. This is particularly useful for immersion heaters and other appliances where you want to confirm operational status without checking the appliance itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 35mm back box depth is needed to accommodate the module and wiring connections. The module itself has a 20mm recessed depth once installed in the grid plate.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293647593739,"sku":"CUGM6N","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/983256_b3f5b967-0f91-431f-9201-3dbe8f0f1b61.jpg?v=1714661796"},{"product_id":"13a-2-gang-sp-switched-socket-with-rf-remote-control-white-curved-edge","title":"13A 2 Gang SP Switched Socket with RF Remote Control - White Curved Edge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge CU9R is a 13A 2-gang single-pole switched socket with built-in RF remote control functionality, allowing each socket to be switched on or off manually via the rocker switches or remotely using the included key fob remote. The remote operates on a 433MHz RF signal with a range of up to 30 metres through walls, making it suitable for controlling lamps, fans, or seasonal decorations without needing to reach the wall socket.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential living rooms, bedrooms, home offices and care environments where remote power switching adds convenience or accessibility, the socket fits a standard 25mm minimum back box depth and uses single-pole switching (live line only). Each socket is rated to 13A, supporting appliances up to 2990W combined load. The white curved-edge faceplate is moulded from thermoset resin with inherent anti-microbial properties, and the neon indicator confirms when power is flowing to the outlets.\u003c\/p\u003e\n\u003cp\u003eThe key fob remote requires two CR2016 lithium batteries (included) and can control both sockets independently — pressing button A switches socket A, button B switches socket B. The remote can be paired with multiple CU9R sockets in different rooms, or one socket can respond to multiple remotes, giving flexibility in multi-room or shared-access setups. The curved-edge plate projects 7mm from the wall once fitted, giving a softer profile than traditional square-edge faceplates.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\" style=\"width: 100%; height: 235.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 55.9009%; height: 19.6px;\"\u003eHeight\u003c\/td\u003e\n\u003ctd style=\"width: 41.6172%; height: 19.6px;\"\u003e86 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 55.9009%; height: 19.6px;\"\u003eWidth\u003c\/td\u003e\n\u003ctd style=\"width: 41.6172%; height: 19.6px;\"\u003e146.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 55.9009%; height: 19.6px;\"\u003eProjection\u003c\/td\u003e\n\u003ctd style=\"width: 41.6172%; height: 19.6px;\"\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 55.9009%; height: 19.6px;\"\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd style=\"width: 41.6172%; height: 19.6px;\"\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 55.9009%; height: 19.6px;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"width: 41.6172%; height: 19.6px;\"\u003eThermoset resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 55.9009%; height: 19.6px;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"width: 41.6172%; height: 19.6px;\"\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 55.9009%; height: 19.6px;\"\u003eIP Rating\u003c\/td\u003e\n\u003ctd style=\"width: 41.6172%; height: 19.6px;\"\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 55.9009%; height: 19.6px;\"\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 41.6172%; height: 19.6px;\"\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 55.9009%; height: 19.6px;\"\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd style=\"width: 41.6172%; height: 19.6px;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 55.9009%; height: 19.6px;\"\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd style=\"width: 41.6172%; height: 19.6px;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 55.9009%; height: 19.6px;\"\u003eAnti-Microbial Properties\u003c\/td\u003e\n\u003ctd style=\"width: 41.6172%; height: 19.6px;\"\u003eInherent properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 55.9009%; height: 19.6px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"width: 41.6172%; height: 19.6px;\"\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4806221_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_960134.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the range of the remote control?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe RF remote operates on 433MHz with a range of up to 30 metres through typical interior walls. Actual range depends on wall construction — metal studs or thick masonry may reduce the effective distance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan one remote control multiple sockets?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The remote can be paired with multiple CU9R sockets in different rooms, allowing one key fob to control several sockets. Each socket can also respond to multiple remotes if needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat batteries does the remote use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe key fob remote requires two CR2016 3V lithium coin batteries, which are included. Replace them when the remote becomes unresponsive or the range shortens noticeably.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The socket carries an IP20 rating, meaning it is designed for dry indoor locations only. For outdoor or bathroom installations, an IP-rated socket is required.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293647626507,"sku":"CU9R","price":38.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/959174_9bfdcbf1-12d3-402d-beca-4ddac46d8e70.jpg?v=1714661799"},{"product_id":"dual-usb-fast-charge-module-18w-qc-45w-usb-pd-50mm-x-50mm-white","title":"Dual USB Fast Charge Module (18W QC + 45W USB-PD) 50mm x 50mm - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge NETUSBPDWH is a 50mm x 50mm dual USB charging module with one 18W Quick Charge USB-A port and one 45W Power Delivery USB-C port, designed to fit euro-module faceplates. The module outputs up to 12V DC 1.5A on the USB-A port and up to 20V DC 2.25A on the USB-C port, allowing simultaneous fast-charging of two devices from a single 230V mains supply.\u003c\/p\u003e\n\u003cp\u003eDesigned for modular electrical installations in homes, offices and hospitality environments, the module fits 50mm x 50mm apertures in compatible euro-module faceplates and requires a minimum 47mm mounting box depth behind the wall. The white polycarbonate faceplate sits flush with the faceplate once installed, providing a clean finish that matches other white grid modules in the same range. The module is certified to BS EN 62368 and carries an IP20 rating for standard indoor dry locations.\u003c\/p\u003e\n\u003cp\u003eThe USB-C Power Delivery protocol negotiates voltage between 5V and 20V depending on the connected device, making the module compatible with fast-charging laptops, tablets and smartphones that support USB-PD. The USB-A port supports Qualcomm Quick Charge 3.0, delivering adaptive voltage to compatible devices. Both ports can operate simultaneously, with the module's internal circuitry managing power distribution to prevent overload.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e36.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4820114_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat faceplates is this module compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module fits any euro-module faceplate with a 50mm x 50mm aperture. Knightsbridge produces compatible grid faceplates in various finishes including white, chrome, brass and black. The module clips into the faceplate from behind and is secured with the faceplate's fixing screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan both USB ports be used at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The module supports simultaneous charging on both the USB-A and USB-C ports, with internal circuitry managing power distribution between the two outputs. Total output will not exceed the module's maximum rating when both ports are in use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat devices support USB Power Delivery charging?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUSB-PD is supported by most modern laptops (MacBook, Dell XPS, HP Spectre), tablets (iPad Pro, Surface Pro) and smartphones (iPhone 8 onwards, Samsung Galaxy S9 onwards, Google Pixel). The module negotiates the voltage and current the connected device requests, up to the 45W maximum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 47mm mounting box depth is required. The module projects 36.5mm from the rear of the faceplate, so shallow back boxes or surface-mounted installations may not provide sufficient clearance.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293649035531,"sku":"NETUSBPDWH","price":30.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1300810_40e2d686-d419-4036-81cd-87e06d469e16.jpg?v=1714661806"},{"product_id":"10ax-2-way-pull-cord-switch-part-m-compliant-white","title":"10AX 2-Way Pull Cord Switch - Part M Compliant White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 2-way pull cord switch is designed for UK Building Regulations Part M compliance, with a 2m grey cord fitted with a black triangular bangle that contrasts visually against most ceiling colours. The triangular shape differentiates it from emergency assistance pull cords, which use circular bangles, reducing confusion in bathrooms, care facilities and accessible residential installations.\u003c\/p\u003e\n\u003cp\u003eThe switch fits ceiling roses in bathrooms, shower rooms, en-suites and accessible WCs where wall-mounted switches cannot meet Part M accessibility requirements. The 2-way switching allows the light circuit to be controlled from both the pull cord and a second switch elsewhere in the room. The white thermoset resin base carries an anti-microbial additive tested to reduce bacterial growth on the switch surface, making it suitable for clinical, care and high-hygiene environments.\u003c\/p\u003e\n\u003cp\u003eThe 10AX rating handles resistive loads up to 2,300W and inductive loads (motors, transformers) up to 1,000W on 230V mains. The IP20 rating confirms protection against solid objects larger than 12.5mm, making it suitable for general indoor dry locations but not zones 1 or 2 in bathrooms. The 76mm diameter base mounts to a standard ceiling rose with two wood screws. Knightsbridge backs the switch with a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e43 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eThermoset resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4830323_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1324112.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does Part M compliance mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePart M of the UK Building Regulations sets accessibility standards for new and refurbished buildings. This pull cord switch meets Part M by using a contrasting triangular bangle on a 2m cord, making it reachable and identifiable by users with limited mobility or visual impairment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be installed in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, but only outside zones 1 and 2. The IP20 rating confirms it is suitable for general indoor locations but not direct spray zones. In most bathrooms the pull cord is fitted to the ceiling in the centre of the room, well away from the shower or bath enclosure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is 2-way switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2-way switching allows the same light circuit to be controlled from two different switch positions. In a bathroom this typically means the pull cord and a wall-mounted switch outside the door, so the light can be turned on before entering and off from either location.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the anti-microbial additive?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe white thermoset base incorporates an anti-microbial agent tested to reduce bacterial growth on the switch surface. This does not replace cleaning but provides an additional hygiene layer in environments where touch-surface contamination is a concern, such as care homes, clinics and hospitals.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293651001611,"sku":"PM8300","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1279744_e1a2b684-b7c9-4e20-a990-cb5bbea5ccb1.jpg?v=1714661857"},{"product_id":"50a-dp-pull-cord-switch-with-neon-indicator-white-part-m-compliant","title":"50A DP Pull Cord Switch with Neon Indicator - White (Part M Compliant)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 50A DP pull cord switch provides double-pole switching for high-load circuits such as showers and cookers, with both a neon indicator and a mechanical ON\/OFF rocker visible on the faceplate. The switch complies with Building Regulations Part M for accessible installations, fitted with a grey triangular bangle at the end of a 2m grey cord set between 900-1100mm above floor level.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, wet rooms and other spaces where a conventional wall switch cannot be installed due to zone regulations or where accessible switching is required, the 50A rating handles circuits up to 11,500W on 230V supply. The double-pole design isolates both live and neutral lines when switched off, providing additional safety for water-heating appliances. The neon indicator glows when the circuit is live, and the mechanical rocker moves position to show ON or OFF status even when the neon fails.\u003c\/p\u003e\n\u003cp\u003eThe white thermoset resin body carries IP20 rating for dry or splash-protected locations, with anti-microbial properties tested to third-party standards on the base unit. The 85mm square faceplate projects 44mm from the ceiling or wall once surface-mounted. The grey triangular bangle at the end of the cord provides visual contrast against most ceiling backgrounds and is distinguishable from emergency assistance cords, meeting Part M contrast requirements. Knightsbridge backs this switch with a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eThermoset resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4830356_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1324118.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Part M compliance and why does it matter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilding Regulations Part M sets accessibility standards for new builds and refurbishments in England and Wales. This switch meets Part M by having a visually contrasting bangle at the correct height range (900-1100mm) and being distinguishable from emergency pull cords. It's required in accessible bathrooms and wet rooms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat load does 50A support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 230V supply, 50A supports circuits up to 11,500W. This makes the switch suitable for electric showers rated 9-11kW, cooker circuits, and other high-draw appliances where pull-cord switching is needed due to zone regulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does it have both a neon and a mechanical indicator?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe neon glows when the circuit is live, providing a visual indication even from across the room. The mechanical rocker moves position to show ON or OFF status, so you can still see the switch state if the neon bulb fails or in bright daylight when the neon is hard to see.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the cord length be adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cord is supplied at 2m length. It can be shortened on installation by tying a knot above the bangle to raise it, but the bangle must remain within the 900-1100mm height range from the finished floor level to meet Part M requirements.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293651034379,"sku":"PM8310N","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1279750_8dcc648e-68fc-4ac4-9082-5e0ee9fd68a3.jpg?v=1714661859"},{"product_id":"1-gang-brush-cable-entry-faceplate-white","title":"1 Gang Brush Cable Entry Faceplate - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 1-gang brush cable entry faceplate provides a 86x86mm aperture filled with nylon bristles, designed to route AV cables, HDMI leads and power cables through walls whilst maintaining a finished appearance. The brush mechanism allows cables to pass through the bristles in any direction, then closes around them to conceal the wall aperture and prevent dust ingress.\u003c\/p\u003e\n\u003cp\u003eCommonly used in wall-mounted TV installations where cables need to run from a media unit or floor-level socket up to the TV position, the faceplate fits a standard single-gang 25mm back box and presents a flush white surround once fitted. The bristles are dense enough to support multiple cable runs simultaneously — typical installations route two HDMI cables, one aerial cable and one power cable through a single faceplate without visible gaps.\u003c\/p\u003e\n\u003cp\u003eThe white ABS construction provides a neutral finish that blends with most wall colours and matches standard white electrical accessories. The 9mm projection from the wall once fitted keeps the faceplate low-profile, and the IP20 rating suits dry indoor environments including living rooms, bedrooms and office spaces. The assembled unit includes the faceplate, brush insert and fixing screws for direct mounting to a back box.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\" style=\"width: 100%; height: 137.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.5024%; height: 19.6px;\"\u003eHeight\u003c\/td\u003e\n\u003ctd style=\"width: 35.0159%; height: 19.6px;\"\u003e86 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.5024%; height: 19.6px;\"\u003eWidth\u003c\/td\u003e\n\u003ctd style=\"width: 35.0159%; height: 19.6px;\"\u003e86 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.5024%; height: 19.6px;\"\u003eProjection\u003c\/td\u003e\n\u003ctd style=\"width: 35.0159%; height: 19.6px;\"\u003e9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.5024%; height: 19.6px;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"width: 35.0159%; height: 19.6px;\"\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.5024%; height: 19.6px;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"width: 35.0159%; height: 19.6px;\"\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.5024%; height: 19.6px;\"\u003eIP Rating\u003c\/td\u003e\n\u003ctd style=\"width: 35.0159%; height: 19.6px;\"\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.5024%; height: 19.6px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"width: 35.0159%; height: 19.6px;\"\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4931515_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe faceplate fits a standard single-gang 25mm minimum depth back box, the same as a standard light switch or socket. The back box should be positioned in the wall cavity at the point where cables will enter or exit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many cables can pass through the brush opening?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 86x86mm aperture filled with bristles typically accommodates 4-6 cables depending on their diameter. A common wall-mounted TV installation routes two HDMI cables, one aerial cable and one mains cable through a single faceplate without difficulty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the brush seal around the cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe nylon bristles close around cables to conceal the wall aperture and reduce dust ingress, but the seal is not airtight. The IP20 rating indicates the faceplate is suitable for dry indoor locations only, not for outdoor use or damp environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan cables be added or removed after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The brush mechanism allows cables to be pushed through or pulled back at any time without removing the faceplate from the wall, making it straightforward to add additional cables or replace existing ones as AV setups change.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293652803851,"sku":"NETBRUSH2","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/983456_6c66b958-a956-4780-ab29-8a7f722d57b2.jpg?v=1714661893"},{"product_id":"2-gang-brush-faceplate-white-assembled","title":"2 Gang Brush Faceplate White - Assembled","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 2-gang brush faceplate is a cable-pass-through wall plate that allows HDMI, power, aerial and other cables to route from behind a wall-mounted TV or monitor down to equipment below whilst keeping the aperture concealed. The black brush strips form two separate channels across the 147 x 86mm faceplate, each allowing multiple cables to pass through whilst the bristles close around them to hide the cut-out in the plasterboard.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial AV installations where cables need to run between stud walls or cavity walls, the faceplate is most commonly used in 'floating TV' setups where the screen is mounted on a bracket with no visible cables running down the wall face. The plate fits a standard UK 2-gang back box (25mm minimum depth) and is fixed with two visible screws at the top and bottom of the faceplate.\u003c\/p\u003e\n\u003cp\u003eThe white ABS construction matches standard UK electrical accessories and pairs with white-painted walls or light-toned interiors. The IP20 rating limits use to dry indoor locations away from moisture. The 9mm projection from the wall once fitted is minimal enough to sit flush with most skirting board depths when installed at floor level for equipment connections.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e86 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4931593_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA standard UK 2-gang back box with a minimum 25mm depth is needed. The faceplate fixes to the box with two screws visible on the front of the plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many cables can pass through?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brush strips accommodate multiple cables depending on their diameter. A typical floating TV setup might route 2-3 HDMI cables, a mains cable and an aerial cable through a single brush channel, with the bristles closing around them to conceal the aperture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating limits use to dry indoor locations. Brush faceplates are not suitable for bathrooms, kitchens near sinks, or any location where moisture is present.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the brush strips removable for threading cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brush strips are fixed into the faceplate. Cables are threaded through the bristles by pushing them through from one side — the bristles part to allow the cable to pass and then close back around it.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293652869387,"sku":"NETBRUSH4","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/983462_3d0969eb-0b28-48f8-8ec9-911bb3752f38.jpg?v=1714661896"},{"product_id":"1-way-10-150w-trailing-edge-pull-cord-dimmer-switch-matt-white","title":"1-Way 10-150W Trailing Edge Pull Cord Dimmer Switch - Matt White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge pull cord dimmer switch uses trailing-edge dimming technology to control loads from 10-150W for incandescent bulbs or 5-100W for LED lamps. The 75mm diameter matt white ceiling rose houses the dimmer electronics, with a 1.5m white braided pull cord and a conical white pull tip for operation. The switch is wired as a 1-way circuit, meaning it controls a single light fitting from one location.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, utility rooms and attic spaces where cord-operated controls are preferred or required under building regulations, the dimmer uses a pull-on\/pull-off action for switching and a pull-and-hold operation for dimming up or down. A built-in potentiometer on the dimmer module allows the dimming curve to be adjusted during installation to eliminate flicker with specific lamp types, improving compatibility across LED and incandescent light sources.\u003c\/p\u003e\n\u003cp\u003eThe 36mm-deep ceiling rose is constructed from premium-grade steel with an ABS fascia in a matt white finish. The IP20 rating limits installation to dry indoor locations only. The switch is certified to EN 60669-2 and carries Class II double-insulated wiring, so no earth connection is required. The 1.5m cord length suits ceiling heights between 2.4-2.7m, allowing the pull tip to hang at a comfortable reach height of approximately 1.8-2m from the floor.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e36 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e1.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4959628_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1363692.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between trailing-edge and leading-edge dimming?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTrailing-edge dimmers switch off the AC waveform at the end of each cycle rather than the start, making them better suited to LED and electronic transformer loads. Leading-edge dimmers work well with incandescent and magnetic transformer loads but can cause flickering or buzzing with LEDs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with my LED bulbs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dimmer supports LED loads between 5-100W total. Compatibility depends on the specific LED lamp — check with the lamp manufacturer that their product is rated as dimmable and compatible with trailing-edge dimmers. The built-in potentiometer can be adjusted to fine-tune performance and reduce flicker with different lamp types.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be installed in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, but only in zones where IP20-rated equipment is permitted under BS 7671 wiring regulations. The switch is suitable outside bathroom zones 0, 1 and 2, typically meaning installation on a ceiling at least 2.25m from a bath or shower tray. Consult a qualified electrician for confirmation on your specific installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 1-way mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1-way means the dimmer controls a single light fitting from one location only. If you need to control the same light from two different positions (e.g. top and bottom of stairs), you would need a 2-way dimmer circuit instead.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293653131531,"sku":"8301MW","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1068312_a2ef9422-a19f-4622-ab24-12822469d39a.jpg?v=1714661905"},{"product_id":"20ax-1-gang-2-way-sp-grid-toggle-switch-matt-white","title":"20AX 1 Gang 2-Way SP Grid Toggle Switch - Matt White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 20AX 1-gang 2-way SP grid toggle switch is a modular component designed to clip into compatible grid mounting frames (sold separately). The switch module itself measures 24.8mm wide by 56.3mm tall, fitting a single-gang aperture within a larger grid plate. The toggle rocker is finished in matt white ABS with a premium-grade steel construction behind.\u003c\/p\u003e\n\u003cp\u003eRated at 20AX on 230V 50Hz mains, the switch handles lighting circuits and motor loads up to 4,600W. The 2-way single-pole configuration allows the same circuit to be controlled from two separate switch locations, typical for landing lights, hallway circuits and staircases. The module clips onto a grid frame which then fixes to a 35mm minimum back box depth, giving a total projection of approximately 20.5mm from the wall once installed.\u003c\/p\u003e\n\u003cp\u003eThe matt white finish provides a neutral tone that pairs with white walls and light-coloured interiors without introducing a colour accent. The grid system allows multiple switch and socket modules to be combined into a single faceplate, creating bespoke control panels tailored to specific room requirements. Knightsbridge backs the module with a 25-year warranty, reflecting the steel and ABS construction quality.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e56.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e24.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e15.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e20.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4960718_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounting frame is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis module clips into Knightsbridge grid mounting frames, sold separately. Grid frames are available in 1-gang, 2-gang, 3-gang and larger configurations depending on how many modules you need to combine in a single faceplate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way SP switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSingle-pole (SP) means the switch breaks only the live conductor, not the neutral. 2-way means the switch can be paired with another 2-way switch to control the same circuit from two locations, typical for staircase or hallway lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat load can it handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 20AX rating allows the switch to handle resistive loads up to 4,600W on 230V mains. This covers typical domestic lighting circuits and some motor loads, but always check the total load on the circuit does not exceed this rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It is rated IP20, so it is for dry rooms only. The IP20 rating means the module is not rated for moisture exposure.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293653590283,"sku":"GDM01TOGMW","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/983270_56d560f8-c741-4f7f-adcf-9ae3c7756887.jpg?v=1714661921"},{"product_id":"20ax-intermediate-grid-toggle-switch-module-matt-white","title":"20AX Intermediate Grid Toggle Switch Module - Matt White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 20AX intermediate grid toggle switch module is a single-gang modular component designed to clip into Knightsbridge grid mounting frames (sold separately). The intermediate switching function allows lighting to be controlled from three or more points in a circuit, sitting between two two-way switches to extend multi-way control across longer hallways, staircases or rooms with multiple entry points.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial grid installations, the module measures 56.3mm high by 24.8mm wide and fits into single, double, triple or quad-gang grid frames depending on the number of functions needed in one faceplate. The 20AX rating handles resistive loads up to 4,600W at 230V, making it suitable for standard lighting circuits including LED, halogen and incandescent fittings. The module requires a minimum 35mm back box depth for safe installation.\u003c\/p\u003e\n\u003cp\u003eThe matt white toggle sits on a steel and ABS body designed for grid system compatibility. The toggle action is centre-sprung to maintain tactile feedback across thousands of operations, and the module clips firmly into the rear of the grid frame without requiring separate fixings or screws once the frame is wall-mounted. The matt white finish pairs with Knightsbridge's matt white grid frames and other modules in the same range to build coordinated multi-function faceplates.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e56.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e24.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e15.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e20.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4960761_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between intermediate and two-way switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo-way switches control lighting from two points (e.g. top and bottom of stairs). Intermediate switches sit between two two-way switches to add a third, fourth or fifth control point. You need at least two two-way switches and one or more intermediate switches to create a multi-way circuit with three or more control locations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat grid frame does this module fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module clips into any Knightsbridge grid mounting frame (sold separately). Grid frames are available in single, double, triple and quad-gang configurations in various finishes including matt white, polished chrome, brushed chrome and matt black. The frame is fixed to the back box first, then modules clip into the rear of the frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the load rating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e20AX at 230V resistive, handling up to 4,600W. This covers standard domestic and commercial lighting circuits including LED, halogen and incandescent fittings. The rating does not apply to motor loads or highly inductive circuits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple modules be fitted in one faceplate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The modular grid system allows multiple switches, sockets, dimmers and USB modules to be combined in a single two-gang, three-gang or four-gang grid frame. Each module occupies one grid position, so a triple-gang frame can hold three separate functions behind one faceplate.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293654475019,"sku":"GDM05TOGMW","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/983378_8701b46b-3d8c-4b5e-9af8-1e523522fb13.jpg?v=1714661940"},{"product_id":"45a-dp-switch-with-neon-1-gang-matt-white-screwless","title":"45A DP Switch With Neon 1 Gang - Matt White Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge 45A double-pole switch with neon indicator provides mains isolation for cookers, ovens and hobs in a single-gang matt white screwless faceplate. The switch interrupts both live and neutral lines, allowing appliances to be safely isolated for cleaning, maintenance or emergency shutdown without touching the consumer unit.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchens where a single cooker control point is needed, the switch is typically mounted within 2 metres of the appliance it controls, usually at worktop height beside the cooker or hob. The red neon indicator glows when the switch is in the ON position, providing a visual check that power is flowing to the appliance. When switched OFF, the neon goes dark and the appliance is fully isolated from the mains.\u003c\/p\u003e\n\u003cp\u003eThe screwless matt white cover plate clips onto a separate metal sub-frame fixed to a 47mm minimum depth back box, leaving no visible fixings on the wall once installed. The premium-grade steel construction and 25-year warranty reflect Knightsbridge's positioning as a contractor-grade brand. The 45A rating handles loads up to 10,350W at 230V, sufficient for most domestic cooking appliances including dual-fuel range cookers.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4971474_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292022.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the neon indicator show?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe red neon glows when the switch is in the ON position, confirming power is flowing to the connected appliance. When the switch is OFF, the neon goes dark and the appliance is fully isolated from the mains.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this control multiple appliances?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 45A rating allows control of multiple cooking appliances provided the combined load does not exceed 10,350W at 230V. Most installations use one switch per appliance for clearer control, but a single 45A switch can theoretically control an oven and a hob wired in parallel if the total demand stays within rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The matt white cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the switch and re-clipped without re-wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293665124619,"sku":"SF81MNMW","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1106726_172c75d2-9a3d-4e7b-a6df-2a2890fe4647.jpg?v=1714662108"},{"product_id":"45a-dp-cooker-switch-with-neon-2-gang-size-matt-white-screwless","title":"45A DP Cooker Switch with Neon 2 Gang Size - Matt White Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 45A DP cooker switch with neon indicator provides double-pole isolation for electric cookers, ovens and hobs rated up to 45A (10.35kW at 230V). The switch uses a 2-gang plate size (147.5mm x 87.5mm) rather than a single-gang format, giving a larger rocker for easier operation and better visual presence on kitchen walls. The neon indicator glows red when the circuit is live, confirming at a glance whether the cooker is powered.\u003c\/p\u003e\n\u003cp\u003eDesigned for new-build kitchens, kitchen refits and replacement of aging cooker control units, the switch mounts directly onto a standard 47mm minimum back box and uses a screwless matt white faceplate that clips onto a separate metal sub-frame. This means there are no visible fixings on the wall once installed. Double-pole switching isolates both the live and neutral conductors, making it safer to disconnect the appliance for cleaning, servicing or when leaving a property unoccupied for extended periods.\u003c\/p\u003e\n\u003cp\u003eThe matt white finish is powder-coated onto premium-grade steel, giving a durable, non-reflective surface that resists fingerprints and scuffs better than gloss white. The 4.3mm projection from the wall keeps the plate shallow enough to sit comfortably on standard plasterboard and masonry installations. The switch carries an IP20 rating for dry indoor use and comes with a 25-year manufacturer warranty covering material and workmanship defects.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4971489_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat appliances can this switch control?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis 45A switch is rated for electric cookers, ovens, hobs and ranges drawing up to 10.35kW at 230V. It can control a single high-draw appliance or multiple lower-rated appliances on the same circuit, provided the combined load does not exceed 45A.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the neon indicator show?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe neon glows red when the circuit is live, confirming that power is reaching the switch. This allows you to verify at a glance whether the cooker is powered without needing to turn on the appliance itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The matt white cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting or tiling around the switch and re-clipped without re-wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293665714443,"sku":"SF82MNMW","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1106740_a04b9d6e-ad2c-4ae1-8737-1e849ffa40ea.jpg?v=1714662127"},{"product_id":"45a-dp-cooker-switch-13a-socket-matt-white-screwless-white-insert","title":"45A DP Cooker Switch \u0026 13A Socket - Matt White Screwless (White Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 45A DP cooker switch combines a double-pole 45A isolation switch with a 13A switched socket and neon indicators behind a matt white screwless faceplate with a white insert. The 45A switch controls the circuit supplying a cooker, hob or range, while the 13A socket provides a separate outlet for extraction fans, microwaves or small kitchen appliances.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation in kitchens within 2m of the appliance being controlled, the unit allows the main cooking appliance to be isolated for cleaning, maintenance or emergency shut-off without switching off the entire kitchen circuit. The double-pole switching isolates both live and neutral lines when off, providing additional safety over single-pole designs. The neon indicators glow red when each switch is in the on position, giving visual confirmation that the circuit is live.\u003c\/p\u003e\n\u003cp\u003eThe screwless cover plate clips onto a separate metal sub-frame fixed to the back box, hiding all fixings once installed. The matt white finish provides a low-sheen surface that resists fingerprints and glare under kitchen lighting, pairing with contemporary white and light-toned kitchens. The unit requires a 47mm minimum back box depth and the premium-grade steel construction carries a 25-year manufacturer warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4971535_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between single-pole and double-pole switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDouble-pole switching isolates both the live and neutral lines when the switch is off, whereas single-pole only breaks the live. Double-pole is the safer option for high-draw appliances like cookers and is required by UK wiring regulations for appliances over 3,000W.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is needed. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do the neon indicators show?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach switch has a red neon indicator that glows when the switch is in the on position, providing visual confirmation that the circuit is live. The 45A switch and the 13A socket each have their own indicator.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this control two separate cooking appliances?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 45A switch typically controls the main cooker circuit (up to 10,800W at 230V). The separate 13A socket can supply a second appliance up to 3,000W, such as a microwave, extractor fan or slow cooker, provided both are on the same ring main or dedicated circuit.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293666631947,"sku":"SFR83MNMW","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1106762_a79c870e-3c5c-4ddb-bb90-67d730df7ff3.jpg?v=1714662152"}],"url":"https:\/\/niori.co.uk\/collections\/white-sockets-switches.oembed?page=7","provider":"Niori","version":"1.0","type":"link"}