{"title":"TV \u0026 Aerials","description":"\u003cp\u003eOur range of TV and aerial equipment covers everything between the signal and the screen: aerials for Freeview reception, distribution amplifiers and splitters for feeding several rooms, coaxial cable and connectors, wall brackets to mount the television, and projector screens where a bigger picture is wanted. Found it cheaper elsewhere? We will match the price.\u003c\/p\u003e","products":[{"product_id":"fixed-wall-mount-monitor-bracket-12-28-inch-matt-black","title":"Fixed Wall Mount Monitor Bracket 12-28 Inch - Matt Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe ESP TFT-BRA1 is a fixed wall mount bracket for monitors and small TVs between 12 and 28 inches, supporting screens up to 20kg. The bracket uses a VESA mounting pattern compatible with both 75x75mm and 100x100mm hole configurations, covering the majority of displays in this size range. The mount sits close to the wall with minimal projection once the screen is attached.\u003c\/p\u003e\n\u003cp\u003eDesigned for home offices, reception areas, retail point-of-sale displays and domestic kitchen TVs where a fixed position is required and there is no need for tilt or swivel adjustment. The bracket attaches to masonry, brick or stud walls using appropriate fixings (not included). The matt black finish on the steel mounting plate sits behind the screen once fitted and is not visible from the front.\u003c\/p\u003e\n\u003cp\u003eThe bracket weighs 405g unboxed and uses a hook-on design where the VESA plate on the back of the screen slots onto the wall-mounted bracket. This allows the screen to be removed for cleaning or cable access without removing the wall plate. The close-to-wall fit gives the appearance of a flush-mounted screen when viewed from the side, similar to a picture frame rather than a cantilevered TV mount.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eWall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVESA Wall Hanging\u003c\/td\u003e\n\u003ctd\u003e50 x 50, 75 x 75, 100 x 100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Supported Screen Size\u003c\/td\u003e\n\u003ctd\u003e28Inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e114 x 114 x 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Net Weight\u003c\/td\u003e\n\u003ctd\u003e0.41KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Gross Weight\u003c\/td\u003e\n\u003ctd\u003e0.41KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_TFT-BRA1_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat VESA patterns does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bracket is compatible with VESA 75x75mm and 100x100mm mounting hole patterns, which cover the majority of monitors and small TVs between 12 and 28 inches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow far does it sit from the wall?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a fixed bracket designed for a close-to-wall fit. Once the screen is mounted, the total projection from the wall is typically 20-30mm depending on the depth of the screen itself and any cable connectors at the back.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the screen tilt or swivel?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a fixed mount with no tilt, swivel or rotation adjustment. The screen sits in a single position once mounted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fixings are needed for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWall fixings are not included. Use appropriate fixings for your wall type: expanding bolts for masonry and brick, or heavy-duty plasterboard anchors or stud screws for plasterboard walls. The bracket supports up to 20kg, so fixings must be rated accordingly.\u003c\/p\u003e","brand":"ESP","offers":[{"title":"Default Title","offer_id":45294103396619,"sku":"TFT-BRA1","price":25.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/TFT-BRA1_848061be-4bf7-4926-8cfa-27ee5780e4d4.jpg?v=1714668120"},{"product_id":"vesa-wall-mount-bracket-200mm-x-200mm-15-tilt-up-to-47-25kg","title":"VESA Wall Mount Bracket 200mm x 200mm - 15° Tilt Up to 47\" 25kg","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis VESA wall mount bracket supports screens up to 47\" and 25kg with a 200mm x 200mm VESA mounting pattern. The bracket provides 15° of tilt adjustment, allowing the screen to be angled downward for optimum viewing from seated or standing positions. The low-profile design sits close to the wall when mounted, minimising the projection from the wall surface.\u003c\/p\u003e\n\u003cp\u003eDesigned for CCTV monitors, digital signage displays and small televisions in commercial and residential installations, the bracket suits control rooms, retail spaces, receptions and home offices where wall-mounted screens need to be positioned at eye level or above. The 200mm x 200mm VESA compatibility covers most 32-47\" monitors and screens, though buyers should verify their specific screen's VESA pattern before ordering.\u003c\/p\u003e\n\u003cp\u003eThe bracket is constructed from black powder-coated steel with a net weight of 1.25kg. The mounting plate fixes to the wall via the two extending arms visible in the image, which are pre-drilled for screw fixings. The central oval aperture on the main plate accommodates the VESA bolt pattern on the back of the screen, with four fixing points allowing screens to be centred within the 200mm x 200mm VESA grid. The tilt mechanism uses a friction hinge that holds the screen at the chosen angle without requiring additional locking.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eWall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVESA Wall Hanging\u003c\/td\u003e\n\u003ctd\u003e75 x 75, 100 x 100, 200 x 100, 200 x 200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Supported Screen Size\u003c\/td\u003e\n\u003ctd\u003e47Inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e220 x 200 x 52mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Net Weight\u003c\/td\u003e\n\u003ctd\u003e1.25KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Gross Weight\u003c\/td\u003e\n\u003ctd\u003e1.30KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_TFT-BRA4_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_TFT-BRA4.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat VESA pattern does this bracket support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bracket is compatible with VESA mounting patterns up to 200mm x 200mm. This covers most screens between 32\" and 47\". Check the back of your screen or the manufacturer's specification sheet to confirm the VESA pattern before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can it hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bracket supports screens up to 25kg. This is sufficient for most commercial-grade CCTV monitors and consumer televisions in the 32-47\" range, but verify your screen's weight before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow far does it sit from the wall?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bracket is designed as a close-to-wall fit, minimising projection. The exact distance depends on the depth of the screen being mounted and any cables routed behind it, but the bracket itself adds minimal depth beyond the screen's own profile.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the tilt adjustable after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 15° tilt range allows the screen to be angled downward after mounting. The friction hinge holds the screen at the chosen angle without requiring tools to adjust or lock the position.\u003c\/p\u003e","brand":"ESP","offers":[{"title":"Default Title","offer_id":45294135410955,"sku":"TFT-BRA4","price":51.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/TFT-BRA4_05c0e907-44c6-4d53-9d76-bfb167fa8afd.jpg?v=1714668538"},{"product_id":"av-link-twin-rg6-satellite-extension-kit-3m","title":"AV:Link Twin RG6 Satellite Extension Kit - 3m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link twin RG6 satellite extension kit provides 3m of twin coaxial cable with pre-fitted F-type connectors and two F-type couplers for extending or relocating satellite receivers. Each cable carries a 1mm copper-clad steel (CCS) conductor surrounded by 4.6mm foam polyethylene dielectric, aluminium foil screen and aluminium braid, giving 75 ohm impedance for digital satellite signal transmission.\u003c\/p\u003e\n\u003cp\u003eDesigned for Sky and Freesat box installations where the existing cable run is too short, the kit allows the receiver to be moved to a different room or position without re-running cable from the LNB. The pre-fitted F-type connectors screw directly onto the receiver's input ports, while the two included F-type couplers join the extension cable to the existing cable run. This avoids the need for crimping or soldering on site.\u003c\/p\u003e\n\u003cp\u003eThe twin cable configuration carries two independent signals. Typically used for dual-tuner receivers that record one channel while watching another, or for connecting two separate outputs from a quad LNB to a single receiver. The 6.6mm diameter per cable is standard RG6 gauge, matching most UK satellite installations installed since the mid-2000s. The zinc alloy F-type connectors resist corrosion better than brass-plated steel in damp environments such as loft spaces.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.25KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e2 x 6.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eCCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e64 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAlumnium foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eF type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector material\u003c\/td\u003e\n\u003ctd\u003eZinc alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included in the kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit contains one 3m twin RG6 cable with pre-fitted F-type connectors at both ends (four connectors total, two per cable end) and two F-type barrel couplers for joining to existing cable runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with my existing satellite cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit works with any standard RG6 coaxial cable fitted with F-type connectors. If your existing cable has a different connector type or is a different gauge, you may need an adapter or a different extension solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable and connectors are rated for indoor use and sheltered outdoor runs such as under eaves or in conduit. For fully exposed outdoor runs, use a kit with weatherproof connectors and UV-resistant cable jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does twin cable mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwin cable carries two independent coaxial cables side-by-side, typically used for dual-tuner satellite receivers that need two separate LNB outputs to record one channel while watching another.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313046544651,"sku":"112.023UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112023UK_0.jpg?v=1784888815"},{"product_id":"av-link-coaxial-y-splitter-1-plug-to-2-sockets","title":"AV:Link Coaxial Y Splitter - 1 Plug to 2 Sockets","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link coaxial Y splitter takes one incoming aerial signal and splits it to two output sockets, allowing a single TV aerial or FM radio antenna to feed two separate devices. The splitter has one male coaxial plug on the input side and two female coaxial sockets on the output side, both using standard RF connectors compatible with UK aerial cable.\u003c\/p\u003e\n\u003cp\u003eDesigned for domestic TV and radio installations where one aerial feed needs to supply two rooms or two devices in the same room, the Y splitter provides passive signal distribution without requiring external power. The splitter works with both digital Freeview TV signals and analogue FM radio signals, though splitting the signal between two devices will reduce the signal strength to each output compared to a direct connection.\u003c\/p\u003e\n\u003cp\u003eThe metal-bodied construction and threaded F-type connectors provide a more secure connection than push-fit alternatives, reducing the risk of loose contacts that cause picture breakup or radio interference. The compact hexagonal body measures approximately 40mm across the widest point, with the three connector ports arranged at 120-degree intervals to minimise strain on connected cables.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoaxial (Aerial)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes splitting the signal reduce quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each output receives approximately half the signal strength of the input. In areas with strong aerial signals this is rarely noticeable, but in weak-signal areas it may cause picture breakup on digital TV or poor reception on FM radio. If signal loss is a problem, consider an active aerial amplifier instead of a passive splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe splitter is not weatherproof and is intended for indoor use only. For outdoor signal splitting, use a weatherproof junction box or an external aerial amplifier rated for outdoor installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with satellite signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This splitter is designed for terrestrial TV aerial and FM radio signals only. Satellite signals require a different type of splitter that can pass DC voltage to the LNB.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan more than two devices be connected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot directly. For distribution to three or more devices, use a dedicated multi-way aerial splitter or distribution amplifier designed for that purpose.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313110606091,"sku":"122.048UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122048UK_1.jpg?v=1784889356"},{"product_id":"av-link-coaxial-y-splitter-1-plug-2-sockets","title":"AV:Link Coaxial Y-Splitter 1 Plug 2 Sockets","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link coaxial Y-splitter has one male coaxial plug (input) and two female coaxial sockets (outputs), allowing a single aerial or FM radio feed to be distributed to two devices. The splitter body is a moulded plastic hexagon with three nickel-plated coaxial connectors: one on the left for the incoming signal, and two at angles on the right for the outgoing feeds.\u003c\/p\u003e\n\u003cp\u003eCommon applications include splitting a rooftop TV aerial to feed two televisions in different rooms, or splitting an FM radio aerial to supply two hi-fi tuners without running separate cables from the aerial point. The splitter introduces approximately 3-4dB signal loss on each output due to passive splitting, so the incoming signal strength must be sufficient to maintain picture or sound quality on both connected devices.\u003c\/p\u003e\n\u003cp\u003eThe nickel-plated connectors resist corrosion and provide stable RF contact. The splitter accepts standard F-type or Belling-Lee coaxial plugs (depending on the specific connector standard used in your installation) and fits behind wall plates or within AV cabinets where space is limited. Supplied in a sealed bag.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoaxial (Aerial)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the splitter amplify the signal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a passive splitter, which means it divides the incoming signal between the two outputs without amplification. Each output receives approximately half the input signal strength, resulting in a 3-4dB loss per output. If the incoming signal is weak, you may need an amplified splitter or a separate signal booster.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat type of coaxial connector does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe product image shows standard coaxial barrel connectors. Confirm the specific connector type (F-type or Belling-Lee) before ordering if your installation requires a particular standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for satellite signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePassive coaxial splitters are generally not suitable for satellite signals because satellite installations often require specific voltage and tone signalling to control LNBs. This splitter is designed for terrestrial TV and FM radio aerial splitting only.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313110704395,"sku":"122.051UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122051UK_1.jpg?v=1784889369"},{"product_id":"mercury-2-way-satellite-f-splitter-5-2250mhz","title":"Mercury 2-Way Satellite F Splitter 5-2250MHz","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury 2-way satellite F splitter divides a single satellite feed into two outputs, allowing two receivers to connect to one dish through F-type coaxial connectors. The splitter supports frequencies from 5MHz to 2250MHz, covering standard satellite TV bands including Ku-band (10.7-12.75GHz downconverted to IF) and L-band signals from LNBs.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and light commercial satellite installations, the splitter fits into standard coaxial runs between an LNB and two receivers or set-top boxes. The zinc die-cast housing provides RF shielding to reduce interference and maintains impedance matching across the frequency range. The F-type connectors accept standard satellite coaxial cable with push-fit or threaded connection depending on the cable type used.\u003c\/p\u003e\n\u003cp\u003eThe splitter introduces signal loss (insertion loss) across both outputs, which is a normal characteristic of passive RF splitting. Most domestic satellite installations can accommodate this loss without needing additional amplification, provided the incoming signal strength from the LNB is adequate. For installations with long cable runs or multiple splits, checking signal levels after installation ensures reliable reception.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003e5MHz - 2250MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan I connect two satellite boxes to one dish using this splitter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided both receivers are viewing channels from the same polarisation and frequency band at the same time. For independent viewing (different channels simultaneously), a twin or quad LNB on the dish is required instead, giving each receiver its own dedicated feed. A splitter shares one LNB output between two receivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cables does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe F-type connectors accept standard satellite coaxial cable (typically RG6 or CT100). The connectors are compatible with both push-fit F-connectors and threaded F-connectors depending on the cable preparation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the splitter need power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The Mercury is a passive splitter and does not require external power. It allows DC power pass-through from the receiver to the LNB on one output path, so ensure the powered receiver connects to the DC-pass port if your installation uses LNB power from the receiver.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313120534795,"sku":"122.807UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122807UK_0.jpg?v=1784885564"},{"product_id":"stv203-3-way-satellite-f-splitter-5-2450mhz","title":"STV203 3-Way Satellite F Splitter 5-2450MHz","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe STV203 is a 3-way satellite F splitter that divides one satellite feed into three separate outputs, operating across the 5-2450MHz frequency range. The unit features F-type threaded connectors on all four ports (one input, three outputs) and incorporates power pass functionality on every output, allowing voltage to pass through to LNBs on all connected receivers simultaneously.\u003c\/p\u003e\n\u003cp\u003eDesigned for multi-receiver satellite installations in homes, flats, caravans and commercial properties, the STV203 allows three satellite receivers or set-top boxes to operate from a single dish feed without requiring additional cabling runs. The zinc die-cast housing measures approximately 60mm x 40mm and mounts to walls or joists using the two flanged mounting tabs, each with a 6mm hole. The compact footprint suits installation behind wall plates or within distribution cabinets.\u003c\/p\u003e\n\u003cp\u003eThe 5-2450MHz bandwidth covers both standard satellite TV frequencies and the extended range used by modern Sky Q and Freesat systems. Power pass on all outputs means the splitter does not block the DC voltage that receivers send back up the coax to power the LNB at the dish, making it compatible with most domestic satellite setups. The unit carries CE certification under G687 659D and uses a zinc alloy body for shielding and durability.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003e5MHz - 2250MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this splitter work with Sky Q systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 5-2450MHz frequency range covers the extended bandwidth used by Sky Q and other modern satellite systems. The power pass on all outputs allows voltage to reach the LNB from any connected receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill I lose signal strength when splitting to three outputs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome signal loss is inherent in any passive splitter. The STV203 divides the input signal across three outputs, which reduces the level at each receiver compared to a direct connection. For installations where receivers are close to the dish and signal strength is already good, this is rarely an issue. In marginal signal areas, amplification may be needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this to split terrestrial TV aerial signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe STV203 is designed for satellite installations and uses F-type connectors rather than the coax plugs typical of terrestrial aerial systems. While the frequency range technically covers terrestrial TV bands, the connector type makes it impractical for standard aerial distribution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the splitter mounted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo flanged mounting tabs with 6mm holes allow the unit to be screwed to a wall, joist or the back of a distribution cabinet. The compact size also allows it to be tucked behind wall plates or inside joinery where space is limited.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313123090699,"sku":"122.823UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122823UK_0.jpg?v=1784889778"},{"product_id":"mercury-amd02-2-way-vhf-uhf-distribution-amplifier-with-dc-pass","title":"Mercury AMD02 2-Way VHF\/UHF Distribution Amplifier with DC Pass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury AMD02 is a 2-way VHF\/UHF distribution amplifier that splits a single aerial input to two outputs plus one full-gain output, delivering 20dB full gain and 12dB per split output. Separate VHF (47-230MHz) and UHF (470-694MHz) inputs allow the unit to handle terrestrial TV and radio signals from dedicated aerials or a combined feed, while an integrated LTE filter blocks mobile network interference in the 694MHz+ range that can disrupt Freeview reception.\u003c\/p\u003e\n\u003cp\u003eDesigned for smaller domestic installations where an aerial signal needs splitting to two or three rooms, the AMD02 fits in loft spaces, behind wall-mounted TVs or on shelving near the entry point of the aerial cable. The DC pass function allows satellite control signals to pass through the unit when paired with a Magic Eye extender or similar device, so Sky boxes or Freeview boxes with IR extenders can still send remote control commands back through the same coaxial cable. The side-mounted F-type coaxial terminals accept standard coaxial connectors and the unit includes two F-type adaptors.\u003c\/p\u003e\n\u003cp\u003eThe fully screened metal housing reduces signal leakage and external interference pickup, while surge and short-circuit protection prevent damage from transient voltage spikes or wiring faults during installation. The 1m mains cable connects to any standard UK 230V socket and the compact 135 x 70 x 45mm footprint allows the amplifier to be mounted in tight spaces. Maximum output level of 94dBuV and noise below 3.8dB ensure stable signal delivery to connected equipment without visible degradation on Freeview HD channels.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : VHF\u003c\/td\u003e\n\u003ctd\u003e47 - 230MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : UHF\u003c\/td\u003e\n\u003ctd\u003e470-694MHz(5G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull gain output\u003c\/td\u003e\n\u003ctd\u003e20dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e22dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;3.8dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e2 x coax sockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e230Vac, 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e1.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130030UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the split outputs and the full-gain output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe two split outputs (TV1 and TV2) each deliver 12dB gain, while the full-gain output delivers the full 20dB. The full-gain output is typically used for the longest cable run or the room requiring the strongest signal, while the split outputs handle shorter runs to secondary TVs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the LTE filter affect normal Freeview channels?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The integrated LTE filter blocks mobile network frequencies above 694MHz, which fall outside the Freeview UHF band (470-694MHz). All standard Freeview and Freeview HD channels pass through unaffected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this with satellite signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The AMD02 is designed for VHF\/UHF terrestrial aerial signals only. Satellite signals operate at much higher frequencies (950-2150MHz) and require a dedicated satellite distribution amplifier or splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does DC pass allow?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDC pass allows control signals (typically 9V or 12V DC) to pass through the amplifier in reverse, enabling devices like Sky Magic Eye extenders or remote control IR extenders to send commands back to a set-top box via the same coaxial cable that carries the TV signal.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313154547979,"sku":"130.030UK","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130030UK_0.jpg?v=1784890126"},{"product_id":"mercury-amd04-4-way-vhf-uhf-distribution-amplifier-with-dc-pass","title":"Mercury AMD04 4-Way VHF\/UHF Distribution Amplifier with DC Pass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury AMD04 is a 4-way VHF\/UHF distribution amplifier with separate inputs for VHF (47-230MHz) and UHF (470-694MHz) signals, an integrated LTE filter to block 5G\/4G mobile interference, and DC pass capability for satellite control via Magic Eye systems. The unit provides four split outputs at 8dB gain each, plus one full gain output at 20dB, allowing simultaneous distribution to four TVs or radio receivers with a fifth full-strength feed for further distribution or signal analysis.\u003c\/p\u003e\n\u003cp\u003eDesigned for multi-room residential installations, holiday lets, care homes and small commercial premises requiring stable terrestrial TV and radio distribution, the AMD04 amplifies incoming aerial signals and splits them without the degradation that passive splitters introduce. The wideband low-noise amplifier maintains consistent signal quality across all outputs, while 22dB isolation between outputs prevents one receiver from affecting another. The LTE filter cuts mobile phone mast interference that can disrupt digital TV reception in areas with strong 4G\/5G coverage.\u003c\/p\u003e\n\u003cp\u003eThe black metal enclosure measures 180 x 70 x 45mm and mounts via side terminals for wall or cabinet installation. All connections are coaxial sockets with F-type adaptors supplied for standard coax plugs. The DC pass allows satellite dish LNB power and control signals to pass through the amplifier when using combined terrestrial and satellite setups. Surge protection and short-circuit limiting prevent damage from lightning strikes or wiring faults. The unit runs on 230V AC mains via a 1m attached power lead.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : VHF\u003c\/td\u003e\n\u003ctd\u003e47 - 230MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : UHF\u003c\/td\u003e\n\u003ctd\u003e470-694MHz(5G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull gain output\u003c\/td\u003e\n\u003ctd\u003e20dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e22dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;3.8dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e2 x coax sockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e230Vac, 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e1.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130031UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the LTE filter do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integrated LTE filter blocks 4G and 5G mobile phone signals that can interfere with digital TV reception. In areas with strong mobile mast coverage, these signals can cause picture freezing or complete loss of certain TV channels. The filter removes this interference before amplification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this with a satellite dish and aerial together?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The DC pass allows LNB power and control signals from a satellite receiver to pass through the amplifier to the dish via the aerial cable. This is useful in combined terrestrial\/satellite setups where Magic Eye remote extenders are used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the split outputs and the full gain output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe four split outputs each provide 8dB gain and are intended for connecting TVs or radios directly. The fifth full gain output provides 20dB and can be used for a further amplifier or splitter in larger installations, or for a primary TV that needs maximum signal strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the unit installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AMD04 mounts via side terminals on the enclosure, allowing it to be screwed to a wall, inside a cabinet, or onto a board in a plant room. All connections are coaxial sockets. VHF and UHF inputs on one side, five outputs on the other. F-type adaptors are supplied for standard coax plugs. The 1m power lead connects to a standard 230V mains socket.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313154580747,"sku":"130.031UK","price":28.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130031UK_0.jpg?v=1784890137"},{"product_id":"mercury-amd06-6-way-vhf-uhf-distribution-amplifier-with-dc-pass","title":"Mercury AMD06 6-Way VHF\/UHF Distribution Amplifier with DC Pass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury AMD06 is a 6-way VHF\/UHF distribution amplifier designed to split a single aerial signal across six output points plus one full-gain output, maintaining signal strength and picture quality across multiple TV or radio receivers. The unit accepts separate VHF (47-230MHz) and UHF (470-694MHz) inputs and provides 20dB full gain output, compensating for the signal loss that occurs when splitting coaxial cable across multiple rooms or devices.\u003c\/p\u003e\n\u003cp\u003eBuilt for domestic and light commercial installation. Multi-room homes, care facilities, small hotels, student accommodation. The AMD06 reduces snow, pixelation and intermittent signal drop-out on secondary TV points fed from a shared rooftop aerial. The integrated 5G\/4G LTE filter blocks mobile network interference in the 694MHz+ band, preventing picture breakup caused by nearby phone masts. DC pass functionality allows Magic Eye remote satellite control signals to travel back through the amplifier to a Sky or Freesat box located elsewhere in the property.\u003c\/p\u003e\n\u003cp\u003eThe metal housing is fully screened to prevent RF leakage and external interference, and side-mounted terminals allow coaxial cables to be routed cleanly without crossing in front of the unit when wall-mounted. Surge and short-circuit protection prevents amplifier damage from lightning strikes on the aerial or accidental wiring faults. The amplifier ships with four F-type adaptors for converting between coaxial plug and socket terminations depending on the existing cabling. At 225 x 70 x 45mm and 420g, the unit mounts in a loft, understairs cupboard or communications cabinet using the integral keyhole slots on the rear panel.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : VHF\u003c\/td\u003e\n\u003ctd\u003e47 - 230MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : UHF\u003c\/td\u003e\n\u003ctd\u003e470-694MHz(5G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull gain output\u003c\/td\u003e\n\u003ctd\u003e20dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e22dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;3.8dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e2 x coax sockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e230Vac, 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e1.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130032UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the full gain output and the six split outputs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe full gain output provides the entire 20dB amplified signal without splitting loss, typically used for the primary TV or for feeding a secondary amplifier. The six split outputs each receive 8dB gain after the signal has been divided, which is still sufficient for most domestic TV points on cable runs up to 20-30 metres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with both Freeview and satellite?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AMD06 amplifies terrestrial VHF and UHF signals from a rooftop aerial. This covers Freeview TV and DAB\/FM radio. It does not amplify satellite signals. The DC pass function allows Magic Eye or similar remote control signals to pass back through the amplifier to a satellite receiver located elsewhere, but the satellite signal itself must be distributed separately using a satellite-grade splitter or multiswitch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the LTE filter useful?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe built-in 5G\/4G LTE filter blocks mobile network frequencies above 694MHz. In areas close to phone masts, mobile signals can bleed into the UHF TV band and cause picture breakup, pixelation or complete loss of certain Freeview channels. The filter prevents this interference without affecting the wanted TV signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The AMD06 is designed for indoor installation in a dry location such as a loft, understairs cupboard or communications cabinet. The unit requires mains power via the supplied 1m cable and is not weatherproof.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313154613515,"sku":"130.032UK","price":31.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130032UK_0.jpg?v=1784890148"},{"product_id":"mercury-amd08-8-way-vhf-uhf-distribution-amplifier-with-dc-pass","title":"Mercury AMD08 8-Way VHF\/UHF Distribution Amplifier with DC Pass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury AMD08 is an 8-way VHF\/UHF distribution amplifier with separate VHF and UHF inputs, delivering 20dB gain on the full output and 8dB gain per split across eight individual outputs. The unit accepts VHF signals from 47-230MHz and UHF signals from 470-694MHz, with an integrated 5G\/4G LTE filter blocking mobile signal interference before amplification. A DC pass function allows satellite control signals to pass through for Magic Eye remote extenders.\u003c\/p\u003e\n\u003cp\u003eDesigned for multi-room TV and radio distribution in residential and light commercial installations, the AMD08 takes a single aerial signal and distributes it to up to nine outputs (eight individual plus one full-gain output for cascading to additional distribution equipment). The side-mounted terminals simplify cable management in cabinet or wall-mounted installations, while the coaxial socket connections accept standard F-type connectors (four F-type adaptors included).\u003c\/p\u003e\n\u003cp\u003eThe fully screened metal housing blocks external interference and works with Digital Terrestrial (Freeview), satellite systems, cable TV, and DAB\/FM radio signals. The low-noise wideband amplifier maintains a noise figure below 3.8dB, while surge and short-circuit protection with a maximum 87dBuV output limiter prevents damage to downstream equipment. The 75-ohm impedance matches standard UK aerial and distribution cabling. At 270 x 70 x 45mm and 500g, the unit mounts discreetly in loft spaces, cupboards or AV cabinets.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : VHF\u003c\/td\u003e\n\u003ctd\u003e47 - 230MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : UHF\u003c\/td\u003e\n\u003ctd\u003e470-694MHz(5G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull gain output\u003c\/td\u003e\n\u003ctd\u003e20dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e22dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;3.8dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e2 x coax sockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e230Vac, 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e1.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130033UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the individual outputs and the full gain output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe eight individual outputs each deliver 8dB gain and are designed for connecting directly to TVs or radios. The full gain output delivers 20dB and is typically used to cascade into another distribution amplifier or booster when more than eight outputs are needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with Freeview and satellite signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The amplifier works with Digital Terrestrial (Freeview), satellite, cable TV, and DAB\/FM radio signals. The separate VHF and UHF inputs allow terrestrial aerial signals to be connected independently, while the DC pass supports satellite Magic Eye remote extenders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the LTE filter do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integrated 5G\/4G LTE filter blocks interference from mobile phone signals before amplification. This prevents picture break-up or signal dropout caused by nearby mobile phone masts transmitting in adjacent frequency bands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable connections does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe amplifier uses coaxial socket connections compatible with standard F-type plugs. Four F-type adaptors are included in the box to convert the sockets for use with traditional coax plugs if needed.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313154679051,"sku":"130.033UK","price":35.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130033UK_0.jpg?v=1784890159"},{"product_id":"av-link-precision-coaxial-socket-nickel-plated-brass-bulk","title":"AV:Link Precision Coaxial Socket - Nickel Plated Brass (Bulk)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link precision coaxial socket is a nickel-plated brass coaxial connector designed for aerial and RF signal distribution installations. The socket accepts standard coaxial plugs (male connectors) and provides a secure push-fit connection for TV aerials, satellite dishes, and radio antenna systems operating on VHF, UHF and FM frequencies.\u003c\/p\u003e\n\u003cp\u003eSold in bulk for installation projects requiring multiple connection points, the socket suits residential aerial distribution systems, multi-room TV installations, communal aerial systems in apartment blocks, and commercial AV distribution racks. The threaded body allows the socket to be panel-mounted or fitted to junction boxes, providing a fixed connection point where coaxial cable runs terminate.\u003c\/p\u003e\n\u003cp\u003eThe nickel-plated brass construction resists corrosion better than uncoated brass or zinc alloy alternatives, maintaining conductivity over time when exposed to indoor humidity or outdoor weather in protected enclosures. The plating also reduces signal loss at the connector interface compared to lower-grade materials. The precision-machined centre pin ensures consistent contact with the plug, minimising signal reflection and interference in the connection.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoaxial (Aerial)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable does this socket accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket accepts standard coaxial plugs (male connectors) fitted to coaxial cable such as RG6, CT100, or WF100. The plug fitting must match the socket diameter. This is a standard UK\/EU coaxial socket compatible with most domestic aerial and satellite plugs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe nickel-plated brass construction resists corrosion, but the socket is not IP-rated for direct weather exposure. It can be used in outdoor enclosures or junction boxes that protect the connection from rain and moisture ingress.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for satellite as well as aerial?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The socket handles the frequency range used by both terrestrial TV aerials (VHF\/UHF) and satellite dishes (950-2150 MHz). It provides a passive connection point and does not filter or attenuate signals within the broadcast spectrum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between bulk and retail packaging?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBulk packaging typically means the sockets are supplied in plain bags or boxes without individual retail packaging, reducing cost per unit for installation projects requiring multiple connectors. The product itself is identical to retail-packaged versions.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313480261899,"sku":"766.086UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/766086UK_0.jpg?v=1784899605"},{"product_id":"av-link-coaxial-female-to-female-coupler","title":"AV:Link Coaxial Female to Female Coupler","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link coaxial coupler is a back-to-back adapter with female coaxial F-type threaded sockets at both ends, designed to join two coaxial leads together. The coupler uses a nickel-plated brass barrel to maintain signal integrity across the join, preventing degradation when extending aerial cables or repositioning TV and FM radio connections.\u003c\/p\u003e\n\u003cp\u003eCommon applications include extending aerial runs between wall plates and TV tuners, joining short coaxial leads into a longer run during temporary installations, and connecting coaxial cables where a direct wall-to-device run is not possible. The threaded F-type sockets ensure a secure mechanical connection that resists loosening under normal handling and cable weight. The coupler works with standard 75-ohm coaxial cables carrying Freeview, satellite, and FM radio signals.\u003c\/p\u003e\n\u003cp\u003eThe compact barrel design minimises the footprint behind wall-mounted TVs and inside AV cabinets. The nickel plating on the brass body provides corrosion resistance and consistent conductivity over time, maintaining the shielding needed to prevent interference on terrestrial and satellite TV signals. The coupler is passive. It does not amplify or attenuate signals, so it suits runs where cable length and signal strength are already within acceptable tolerances.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoaxial (Aerial)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable type does this work with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe coupler accepts standard F-type threaded coaxial plugs, which are used on most modern TV aerial and satellite cables in UK installations. It does not work with older push-fit Belling-Lee (IEC) coaxial connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it affect signal quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe coupler is passive and does not amplify or filter the signal. A well-made join will have minimal signal loss, but any join in a coaxial run introduces a small amount of insertion loss. If you are already close to the minimum signal threshold for reliable reception, adding a coupler may degrade performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for satellite as well as terrestrial TV?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The coupler supports both terrestrial Freeview signals and satellite signals (Sky, Freesat) on 75-ohm coaxial cables with F-type connectors.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313480425739,"sku":"766.299UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/766299UK_0.jpg?v=1784899616"},{"product_id":"av-link-f-connector-twist-on-for-rg58-5mm-cable","title":"AV:Link F Connector Twist-On for RG58 5mm Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link F connector is a twist-on termination for RG58 coaxial cable with a 5mm outer diameter. The connector threads onto the prepared cable end without requiring crimping tools, compression fittings or soldering, making it suitable for field installations and repairs where specialist tools are not available.\u003c\/p\u003e\n\u003cp\u003eDesigned for satellite TV, aerial and RF signal distribution systems, the connector accepts the 5mm diameter RG58 cable commonly used in dual satellite LNB installations and domestic aerial runs. The twist-on mechanism grips the cable braid and seats the centre conductor in the pin, forming both the shield connection and the signal path. Once threaded on, the connector forms an F-type male termination compatible with standard F-type sockets on satellite receivers, distribution amplifiers and wall plates.\u003c\/p\u003e\n\u003cp\u003eThe connector body is formed from nickel-plated metal with a threaded collar that engages the F-type socket. AV:Link specifies compatibility with their 808.107UK, 808.109UK and 808.163UK dual satellite cables, all of which share the 5mm RG58 construction. The twist-on design allows the connector to be removed and refitted if the cable needs to be re-terminated or re-routed during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eF Type (Cable \u0026amp; Satellite)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this require any special tools to fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connector threads onto the prepared cable end by hand. You will need a cable stripper or sharp knife to prepare the RG58 cable (strip back the outer jacket, fold back the braid, strip the dielectric to expose the centre conductor), but no crimping or compression tools are needed to attach the connector itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable diameter does it fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is sized for RG58 coaxial cable with a 5mm outer diameter. It will not fit larger cables such as RG6 (6.15mm) or smaller cables such as RG174 (2.8mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be reused if I need to re-terminate the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The twist-on mechanism allows the connector to be unscrewed from the cable and refitted, provided the cable end has not been damaged during removal. This makes it suitable for installations where cables may need to be re-routed or adjusted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it weatherproof for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is not specified as weatherproof. For outdoor or exposed installations, the F-type connection should be housed inside a weatherproof enclosure or sealed with self-amalgamating tape and heat-shrink to prevent moisture ingress.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313481474315,"sku":"770.150UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/770150UK_0.jpg?v=1784899663"},{"product_id":"av-link-stv19f-f-connector-twist-on-for-rg6-and-ct100-cable-bulk-pack","title":"AV:Link F Connector Twist-On RG6 Aerial Cable Fitting","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link STV19F is a twist-on F connector designed for RG6 and CT100 type coaxial cables with outer diameters between 6.5mm and 7mm. The connector body is machined from zinc alloy with a threaded outer barrel that twists onto the prepared cable end, compressing an internal gripping ring around the cable's outer jacket for a secure mechanical and electrical connection.\u003c\/p\u003e\n\u003cp\u003eUsed in residential and commercial satellite, cable TV and aerial installations, the STV19F provides a reusable connection that can be hand-tightened without specialist crimping tools. The twist-on design allows the connector to be fitted on-site during cable runs, useful when pre-terminated cables would be impractical. The F connector standard is widely compatible with UK satellite receivers, distribution amplifiers, wall plates and splitters expecting a threaded coaxial connection.\u003c\/p\u003e\n\u003cp\u003eThe zinc alloy body provides corrosion resistance and shielding continuity across the connector barrel. The bulk pack format supplies multiple connectors for installers working across several rooms or properties, reducing per-unit cost compared to retail-packaged singles. Each connector weighs approximately 8g and adds roughly 30mm of length to the cable end once fitted.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eF Type (Cable \u0026amp; Satellite)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable types does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe STV19F fits RG6 and CT100 type coaxial cables with outer jacket diameters between 6.5mm and 7mm. These are the standard cables used in UK satellite and aerial installations. It does not fit smaller RG59 or larger WF100 cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a crimping tool?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connector is hand-tightened by twisting the threaded barrel onto the prepared cable end. The internal gripping mechanism compresses around the cable jacket as the barrel is rotated, forming the connection without additional tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the connector be reused?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The twist-on design allows the connector to be unscrewed from the cable end and refitted or moved to a different cable section if needed, though repeated removal may reduce grip strength over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many connectors are in the bulk pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bulk pack typically contains 25 or 50 connectors depending on stock variant. Contact us if you require a specific quantity or need confirmation of pack size before ordering.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313481539851,"sku":"770.152UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/770152UK_0.jpg?v=1784899679"},{"product_id":"av-link-coaxial-plug-to-f-socket-adaptor","title":"AV:Link Coaxial Plug to F Socket Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link coaxial plug to F socket adaptor converts a standard coaxial TV plug (male) into an F-type socket (female), allowing satellite and aerial cables with F-type connectors to connect to devices with coaxial sockets. The metal-bodied construction provides RF shielding and maintains signal integrity for both digital and analogue transmissions.\u003c\/p\u003e\n\u003cp\u003eUsed primarily in satellite TV installations, cable distribution systems, and aerial setups where equipment uses mixed connector types, the adaptor allows a coaxial-fitted device to accept an F-type cable without re-terminating. Common applications include connecting satellite receivers, TV amplifiers, and distribution boxes where the input and output connector types don't match. The threaded F socket accepts standard F-type plugs and provides a more secure connection than push-fit coaxial alternatives.\u003c\/p\u003e\n\u003cp\u003eThe compact 30mm length and metal barrel keep the adaptor unobtrusive when fitted behind wall-mounted screens or in equipment racks. The nickel-plated finish resists corrosion in indoor installations and maintains low contact resistance over time. The adaptor is passive, requiring no power and adding no active components into the signal path.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoaxial (Aerial)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between coaxial and F-type connectors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCoaxial TV plugs are push-fit connectors used on standard aerial cables in the UK. F-type connectors have a threaded coupling nut and are used on satellite cables and some distribution systems. This adaptor bridges the two, allowing a coaxial plug to connect to equipment fitted with an F socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with both satellite and aerial signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adaptor is passive and suitable for both terrestrial TV signals (aerial) and satellite signals (typically 950-2150 MHz). It adds minimal signal loss when used with properly terminated cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe nickel-plated metal body provides some corrosion resistance, but the adaptor is designed for indoor use. For outdoor installations, use weatherproof F-type connectors and cable glands rated for exterior use.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313481801995,"sku":"775.421UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/775421UK_0.jpg?v=1784899731"},{"product_id":"mercury-eco-rg6-air-spaced-pe-coaxial-cable-cca-braid-black-100m","title":"Mercury Eco RG6 Air Spaced PE Coaxial Cable CCA Braid Black 100m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco RG6 is a 75-ohm coaxial cable built with a solid copper-clad steel conductor, air-spaced polyethylene dielectric, aluminium foil screen, copper-clad aluminium braid and black PVC outer sheath. The combined screen and braid reduce electromagnetic interference to the signal path, making the cable suitable for digital terrestrial TV, satellite dish feeds and cable TV installations.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial fixed installations, the cable arrives on a 100m reel with metric cut markers printed along the sheath to simplify measuring and cutting during installation runs. The 6.6mm overall diameter fits standard F-type compression connectors and screw-on connectors used in satellite and aerial systems. The air-spaced dielectric construction reduces signal attenuation compared to solid foam PE designs across the 5-2150MHz range used by UK satellite and digital TV signals.\u003c\/p\u003e\n\u003cp\u003eThe copper-clad aluminium braid (48 strands of 0.12mm wire) provides 60-70% coverage around the foil screen, balancing shielding effectiveness with cable flexibility. The solid copper-clad steel centre conductor carries the signal with a cross-sectional area of 0.79mm² and impedance matched to 75 ohms. Return loss is rated at 24dB minimum per 100m between 5-400MHz, reducing to 16dB minimum per 100m at 1000-2150MHz. Attenuation ranges from 2.9dB\/100m at 5MHz to 33.6dB\/100m at 2150MHz, typical for RG6 cable in long cable runs from dish to receiver.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable colour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eCCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ air spaced PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.5dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.20KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between RG6 and RG59 cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRG6 has a thicker centre conductor and dielectric than RG59, giving lower signal loss over longer runs. RG6 is the standard choice for satellite dishes and digital TV installations where cable runs exceed 15-20m. RG59 is thinner and more flexible but only suited to shorter runs below 15m.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors fit this cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 6.6mm outer diameter fits standard F-type compression connectors and screw-on F-type connectors designed for RG6 cable. Compression connectors give a more reliable weatherproof seal for outdoor satellite dish installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PVC outer sheath is suitable for outdoor use when installed in conduit or trunking to protect it from direct UV exposure and physical damage. For fully exposed runs, cable rated for direct burial or outdoor UV resistance is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is air-spaced PE dielectric?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAir-spaced polyethylene uses a foam or cellular structure that introduces air pockets into the dielectric insulation around the centre conductor. This reduces the dielectric constant compared to solid PE, which lowers signal attenuation and improves the velocity factor to 83%.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313521975563,"sku":"808.111UK","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808111UK_0.jpg?v=1784902035"},{"product_id":"mercury-eco-rg6-air-spaced-pe-coaxial-cable-cca-braid-white-100m","title":"Mercury RG6 Air Spaced White Coaxial Aerial Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco RG6 is a 75 Ohm coaxial cable built around a solid copper-clad steel (CCS) conductor with an air-spaced polyethylene dielectric, aluminium\/PET foil screen, and a copper-clad aluminium (CCA) braid under a white PVC outer sheath. The 100m reel supplies enough cable for typical residential or small commercial TV, satellite and CCTV installations where cost-effective cabling is needed without compromising signal integrity over moderate run lengths.\u003c\/p\u003e\n\u003cp\u003eDesigned for fixed indoor and outdoor installations (subject to conduit or trunking protection where exposed to UV), the air-spaced dielectric reduces capacitance to 54pF\/m and provides an 83% velocity factor, which improves signal propagation compared to solid dielectric designs. The 1mm solid CCS conductor gives better rigidity for pulling through walls and conduit than stranded alternatives, while the dual-screen construction (aluminium foil plus CCA braid) provides adequate shielding against electromagnetic interference from mains wiring, fluorescent lights and RF noise sources in domestic and light commercial environments.\u003c\/p\u003e\n\u003cp\u003eThe white PVC sheath blends with painted plaster, skirting boards and ceiling cornices in residential installations, making the cable less obtrusive when surface-mounted or run along edges. The 6.6mm overall diameter allows the cable to fit standard RG6 compression and crimp connectors (sold separately), and the CCA braid material keeps the 100m reel weight to 4.2kg, making it easier to handle on ladders and in loft spaces than solid copper-braid equivalents. Attenuation is rated at 6.9dB per 100m at 100MHz and 22.5dB per 100m at 1000MHz, which suits most domestic satellite dish and terrestrial aerial installations within typical UK home run lengths of 15-30m.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable colour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eCCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ air spaced PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.5dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.20KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between CCS conductor and solid copper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCCS (copper-clad steel) has a steel core with a thin copper coating, which makes it stiffer and cheaper than solid copper while still conducting the RF signal through the copper layer. For TV and satellite installations the performance difference is negligible over typical domestic run lengths, but solid copper cable is preferred for very long runs or commercial installations requiring lower attenuation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this cable take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 6.6mm outer diameter fits standard RG6 compression and crimp F-connectors. Compression connectors generally provide a more reliable long-term connection and are recommended for outdoor or loft installations where the cable may be subject to temperature variation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided it is installed in conduit, trunking or clipped to a wall under an overhang. The white PVC sheath is not UV-stabilised for prolonged direct sunlight exposure, so unprotected outdoor runs will degrade over time. For fully exposed outdoor runs, consider a UV-rated variant or protect the cable with conduit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much attenuation is acceptable for a satellite dish installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost UK domestic satellite installations use 15-30m of cable from the dish to the receiver. At these lengths, the attenuation of this RG6 cable (6.9dB per 100m at 100MHz) results in a total signal loss of 1-2dB, which is well within acceptable limits for Freesat and Sky reception. Runs over 50m may benefit from a low-loss cable or an inline amplifier.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522041099,"sku":"808.113UK","price":20.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808113UK_0.jpg?v=1784902048"},{"product_id":"mercury-eco-rg6-air-spaced-pe-coaxial-cable-with-cca-braid-brown-100m","title":"Mercury RG6 Air-Spaced Coaxial Aerial Cable - Brown","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco RG6 is a 75 Ohm coaxial cable built around a solid copper-clad steel (CCS) conductor, air-spaced polyethylene dielectric, aluminium\/PET foil screen and copper-clad aluminium (CCA) braid. The brown PVC outer sheath runs 100m on a reel, giving a 4.2kg total weight suitable for single-person handling during installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and light commercial CCTV camera runs, satellite dish feeds and terrestrial TV distribution where cost matters more than the lowest possible signal loss, the cable delivers usable performance across the full satellite frequency range (5-2150MHz) with attenuation figures that suit typical domestic cable runs of 10-30m. The air-spaced dielectric reduces capacitance to 54pF\/m and gives an 83% velocity factor, which keeps signal propagation delay low enough for most CCTV timing requirements.\u003c\/p\u003e\n\u003cp\u003eThe CCA braid and CCS conductor reduce material cost compared to pure copper equivalents, making this cable a practical choice for larger installations where dozens of camera positions need individual cable runs back to a central recorder. The 6.6mm outer diameter fits standard RG6 compression connectors and the brown sheath allows the cable to blend into timber fascias, brown uPVC trunking and garden structures without standing out visually.\u003c\/p\u003e\n\u003cp\u003eThe aluminium\/PET foil screen sits between the dielectric and the braid, providing additional shielding against RF interference in urban areas where Wi-Fi, mobile signals and AM\/FM broadcast can introduce noise into video feeds. The 1mm conductor diameter and 0.79mm² cross-sectional area support DC power injection for cameras up to approximately 15-20m from the DVR, though resistance is higher than pure copper equivalents so longer runs may need separate power feeds.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable colour\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eCCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ air spaced PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.5dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.20KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between CCS and pure copper conductor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCCS (copper-clad steel) has a steel core with a thin copper coating. It costs less than solid copper and provides similar RF performance, but has higher DC resistance. For CCTV camera runs carrying DC power, pure copper cable supports longer distances before voltage drop becomes a problem. For signal-only use (satellite, TV distribution) the difference is negligible at typical domestic run lengths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PVC sheath provides basic weather resistance for outdoor runs in trunking, conduit or clipped to fascias. For direct burial or long-term UV exposure, gel-filled or PE-sheathed cable designed for external use is recommended. The brown colour blends well with timber and brown uPVC outdoor installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 6.6mm outer diameter accepts standard RG6 compression F-connectors. Compression fittings provide better weatherproofing and lower return loss than twist-on or crimp connectors. Ensure the connector is rated for the specific dielectric type. Some RG6 connectors assume solid PE and may not grip correctly on air-spaced dielectric.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much signal loss should I expect on a typical camera run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 20m run at 860MHz (upper end of analogue CCTV) shows approximately 4dB loss. For HD-over-coax systems running at higher frequencies (1750-2150MHz for 4K transmission), a 20m run introduces approximately 6-7dB loss, which is acceptable for most camera-to-DVR distances in residential and small commercial sites.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522073867,"sku":"808.115UK","price":20.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808115UK_0.jpg?v=1784902062"},{"product_id":"mercury-eco-rg6-air-spaced-pe-coaxial-cable-100m-black","title":"Mercury Eco RG6 Air Spaced PE Coaxial Cable 100m - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco RG6 is a 100m reel of 75 Ohm coaxial cable built around a 1mm solid copper-clad steel (CCS) conductor, 4.6mm air-spaced polyethylene dielectric, aluminium foil screen, aluminium braid and black PVC sheath. The air-spaced dielectric reduces signal loss compared to solid foam PE at higher frequencies, making this cable suitable for satellite dish feeds, CCTV camera runs and terrestrial aerial installations where consistent impedance and low attenuation matter.\u003c\/p\u003e\n\u003cp\u003eDesigned for exterior and interior fixed installation, the RG6 cable carries 75 Ohm impedance across the full 5MHz to 2150MHz range, with return loss performance of 24dB minimum below 400MHz and 16dB minimum at 1000-2150MHz. Attenuation peaks at 33.6dB per 100m at 2150MHz, which is low enough for most domestic and light commercial satellite installations without requiring inline amplifiers. The cable's 6.6mm outer diameter fits standard F-type connectors and compression fittings.\u003c\/p\u003e\n\u003cp\u003eThe 100m reel carries metric cut markers along the sheath, allowing you to measure and cut lengths to exact requirements without waste. The 48-strand aluminium braid provides 95%+ coverage against electromagnetic interference, and the aluminium\/PET foil beneath the braid adds a secondary shield layer. The black PVC sheath is UV-stable for external runs along walls and under eaves, though direct burial requires additional conduit protection.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ air spaced PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.5dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.10KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between air-spaced and foam PE dielectric?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAir-spaced PE uses spacers to suspend the conductor within the dielectric layer, creating air gaps that reduce capacitance and signal loss at higher frequencies. Foam PE is denser and easier to terminate but shows higher attenuation above 1GHz. For satellite installations carrying signals up to 2150MHz, air-spaced PE delivers lower loss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used for Sky Q or Freesat installations?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 75 Ohm impedance and low attenuation at 950-2150MHz make this cable suitable for Sky Q, Freesat and other satellite dish feeds. Use compression F-type connectors for termination and ensure runs are kept under 30m where possible to minimise signal degradation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable suitable for outdoor runs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe black PVC sheath is UV-stable for external wall runs, clipped under eaves or mounted in open air. For direct burial or underground ducting, run the cable inside protective conduit to guard against moisture ingress and mechanical damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors fit this 6.6mm cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard F-type compression connectors designed for RG6 cable fit this 6.6mm outer diameter. Compression fittings provide better waterproofing and signal integrity than twist-on connectors, particularly for outdoor installations.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522139403,"sku":"808.117UK","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808117UK_0.jpg?v=1784902077"},{"product_id":"mercury-eco-rg6-air-spaced-pe-coaxial-cable-aluminium-braid-white-100m","title":"Mercury RG6 Air-Spaced White Coaxial Aerial Cable 100m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco RG6 is a 75 Ohm coaxial cable with an air-spaced polyethylene dielectric, a 1mm solid copper-clad steel conductor, aluminium\/PET foil screen, and a 48-strand aluminium braid. The air-spaced dielectric construction reduces signal loss across satellite, digital TV and CCTV frequencies compared to solid-core PE cables, with attenuation ranging from 2.9dB\/100m at 5MHz to 33.6dB\/100m at 2150MHz.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor and indoor satellite dish feeds, Freeview\/Freesat distribution, and CCTV camera runs where signal integrity matters over longer distances. The 6.6mm outer diameter fits standard F-connectors and compression fittings used in satellite and aerial installations. The white PVC sheath suits visible external runs on rendered or UPVC-clad buildings where black cable would stand out.\u003c\/p\u003e\n\u003cp\u003eThe solid copper-clad steel conductor gives tensile strength for overhead or vertical runs while maintaining the conductivity needed for RF signal transmission. The aluminium foil and braid provide dual-layer screening against interference, with the braid adding mechanical protection and a low-impedance earth path. The 100m reel length covers typical domestic satellite or CCTV installations without requiring mid-run joints, which can introduce signal degradation.\u003c\/p\u003e\n\u003cp\u003eEach reel weighs 4.1kg and the cable supports a velocity factor of 83%, meaning signal propagation is 83% of the speed of light in a vacuum. The capacitance of 54pF\/m and 75 Ohm impedance match standard satellite receivers, Freeview boxes, and CCTV DVRs without requiring impedance-matching transformers.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ air spaced PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.5dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.10KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the advantage of air-spaced dielectric over solid PE?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAir-spaced PE dielectric reduces signal attenuation by introducing air gaps within the insulation layer, which has a lower dielectric constant than solid polyethylene. This results in lower capacitance and better signal retention across the frequency range, particularly noticeable on longer cable runs above 20m.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this cable take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 6.6mm outer diameter accepts standard RG6 F-connectors, either screw-on or compression types. Compression F-connectors provide a more reliable weatherproof seal for outdoor satellite dish connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for outdoor installations?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The white PVC sheath is UV-resistant and rated for external use on building facades, though it should be clipped or secured to prevent wind movement damaging the cable over time. For buried runs, use conduit or ducting to protect the cable from stone damage and water ingress at termination points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between CCS and solid copper conductor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper-clad steel (CCS) has a steel core with a copper outer layer. It provides greater tensile strength for overhead or vertical runs compared to pure copper, while the copper cladding maintains the conductivity needed for RF signal transmission. Pure copper conductors offer marginally lower resistance but are less mechanically robust.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522204939,"sku":"808.119UK","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808119UK_0.jpg?v=1784902091"},{"product_id":"mercury-rg6-foamed-coaxial-aerial-cable-black","title":"Mercury RG6 Foamed Coaxial Aerial Cable - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco RG6 is a 75 Ohm coaxial cable built around a 1mm solid copper-clad steel (CCS) conductor, surrounded by a 4.6mm foam polyethylene dielectric, aluminium\/PET foil screen, and 48-strand aluminium braid under a black PVC outer sheath. The cable measures 6.6mm in diameter and is supplied on a 100m reel with cut markers for convenient sectioning during installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for satellite dish downlinks, digital TV aerial distribution, and CCTV camera runs, the RG6 handles frequencies from 5MHz to 2150MHz with attenuation performance that sits between RG59 and quad-shield RG6. The foam dielectric reduces signal loss compared to solid polyethylene cores, while the aluminium braid and foil screen provide shielding against electromagnetic interference from mains cables and wireless signals.\u003c\/p\u003e\n\u003cp\u003eThe solid CCS conductor provides mechanical rigidity for permanent installation runs where the cable is clipped along walls, run through conduit or buried in shallow trunking. The 100m reel length supports full-house installations, multi-camera CCTV systems and commercial satellite distribution without mid-run joints that can degrade signal quality. The cable weighs 3.8kg per 100m reel, making it lighter than quad-shield equivalents while still meeting typical domestic and light commercial installation requirements.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.80KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between RG6 and RG59 coaxial cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRG6 has a thicker 1mm conductor and larger dielectric compared to RG59's 0.81mm conductor, resulting in lower signal loss over longer runs. RG6 is the standard for satellite dish installations and digital TV distribution where cable runs exceed 15-20m, while RG59 is typically used for shorter CCTV camera runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe black PVC sheath provides basic UV resistance for sheltered outdoor runs such as under eaves or through conduit. For direct burial or extended UV exposure, a double-sheathed or gel-filled variant would be preferable. The cable is not rated for wet or underground installation without additional protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does RG6 cable use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRG6 uses F-type connectors for satellite and terrestrial TV installations, and BNC connectors for CCTV and professional video applications. Crimp-on or compression F-connectors provide the most reliable connection. Push-on connectors are acceptable for temporary installations but prone to loosening over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much signal loss should I expect on a 50m run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt typical satellite frequencies around 1000MHz, this cable shows 22.2dB maximum attenuation per 100m, so a 50m run would see approximately 11dB loss. Most satellite LNBs output 90-100dB signal strength, leaving sufficient margin for a receiver to lock onto channels even after a 50m cable run.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522270475,"sku":"808.121UK","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808121UK_rb0.jpg?v=1785078000"},{"product_id":"mercury-rg6-foamed-pe-coaxial-aerial-cable-brown","title":"Mercury RG6 Foamed PE Coaxial Aerial Cable - Brown","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco RG6 is a 75-ohm coaxial cable with a solid copper-clad steel (CCS) conductor, foam polyethylene dielectric, aluminium\/PET foil screen, and aluminium braid, finished in a brown PVC outer sheath. Supplied on a 100m reel with metric markers printed along the cable run, allowing installers to measure and cut to exact lengths without external measuring tools.\u003c\/p\u003e\n\u003cp\u003eDesigned for digital TV aerial systems, satellite dish feeds, and CCTV camera runs, the brown sheath provides a discreet alternative to white or black cable where it runs along skirting boards, across timber cladding, or through garden settings. The 6.6mm overall diameter fits standard coaxial cable clips and external ducting. The 75-ohm impedance matches standard F-connectors, satellite receivers, TV aerials, and DVRs without requiring impedance matching transformers.\u003c\/p\u003e\n\u003cp\u003eThe foam PE dielectric reduces signal loss compared to solid polyethylene cores, keeping attenuation to 22.2dB per 100m at 1000MHz and 33.3dB per 100m at 2150MHz, which allows satellite signals in the 950-2150MHz band to reach receivers with adequate strength over typical domestic runs of 20-40m. The aluminium braid and foil screen provide 24dB minimum return loss between 5-400MHz, suppressing interference from mains wiring and external RF sources. The solid CCS conductor gives better rigidity than stranded copper for fixed installations where the cable is clipped in place and not subject to repeated flexing.\u003c\/p\u003e\n\u003cp\u003eThe 100m reel weighs 3.8kg and the cable has an 83% velocity factor, which affects the physical wavelength of signals travelling through the foam dielectric compared to air. This specification is relevant when calculating stub lengths for phase-matching in distribution amplifier systems or when designing custom-length stubs for filtering applications.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.80KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors fit this cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard RG6 F-connectors, compression or crimp types, fit the 6.6mm outer diameter. The solid CCS conductor accepts push-through compression connectors designed for RG6 cable with 1mm centre pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brown PVC sheath is suitable for outdoor use in typical UK climates when clipped to walls or run through conduit. For burial or exposed UV environments, additional UV-rated ducting or conduit is recommended to extend cable life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum run length for satellite signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 2150MHz (the upper satellite band), attenuation is 33.3dB per 100m. For a typical satellite LNB output of around 90dBµV and a receiver input sensitivity of 50dBµV, a maximum run of approximately 120m is possible before signal drops below usable levels. Practical installations rarely exceed 50m.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy brown instead of white or black?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brown sheath blends against timber cladding, brick, terracotta render, and garden fencing where white or black cable would stand out. It's commonly chosen for external satellite dish feeds on period properties or timber-framed buildings.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522303243,"sku":"808.123UK","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808123UK_rb0.jpg?v=1785078011"},{"product_id":"mercury-eco-rg6-foamed-pe-coaxial-cable-aluminium-braid-white-100m","title":"Mercury RG6 Foamed White Coaxial Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco RG6 is a 75 Ohm coaxial cable built with a solid copper-clad steel (CCS) conductor, foam polyethylene dielectric, aluminium\/PET foil screen, and an aluminium braid beneath a white PVC outer sheath. The 1mm conductor diameter and 6.6mm overall cable diameter sit within the RG6 specification, making this cable compatible with standard RG6 F-connectors and satellite\/TV distribution equipment.\u003c\/p\u003e\n\u003cp\u003eDesigned for digital TV aerial distribution, satellite dish downleads, and CCTV camera runs where a professional-grade coaxial is required but pure copper conductor is not specified, the Mercury Eco offers low attenuation across the 5MHz to 2150MHz frequency range used by terrestrial TV, satellite LNBs and DVB-T2 signals. The 100m reel length suits house rewires, multi-room installations and commercial distribution systems where cable is run from a central splitter to wall plates across multiple rooms.\u003c\/p\u003e\n\u003cp\u003eThe foam PE dielectric reduces signal loss compared to solid polyethylene, while the dual-layer screening (aluminium foil plus aluminium braid) provides rejection of external interference from mains wiring, radio transmitters and mobile signals. The white sheath blends into ceilings and skirting in residential installs, and the reel carries metric cut markers every metre to simplify measuring and costing on-site. At 3.8kg per 100m reel, the cable is light enough for loft runs without needing additional support brackets every few metres.\u003c\/p\u003e\n\u003cp\u003eThe solid CCS conductor maintains signal integrity over longer runs than stranded copper-clad aluminium alternatives, though it is less flexible and requires care when routing tight bends. Installers should observe a minimum bend radius of approximately 50mm to avoid kinking the foam dielectric, which would degrade impedance and increase return loss. The cable is rated for indoor use and protected outdoor runs (within conduit or trunking); it does not carry a UV-stabilised sheath for direct burial or prolonged sun exposure.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.80KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between CCS and pure copper conductor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper-clad steel (CCS) has a steel core with a copper outer layer, giving mechanical strength and reasonable conductivity at lower cost than solid copper. It performs well for RF signals in the MHz-GHz range used by TV and satellite, but is less flexible and harder to strip than pure copper. For typical domestic TV and satellite installations under 50m, CCS provides sufficient signal integrity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used for outdoor aerial or satellite dish runs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided the cable is protected from direct UV exposure and water ingress. Run the cable inside conduit, trunking or clipped under eaves where it is shaded. The white PVC sheath is not UV-stabilised, so prolonged sun exposure will degrade the jacket over time. Do not bury the cable directly in soil.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does RG6 cable use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard F-connectors designed for RG6 cable. The 6.6mm outer diameter and 1mm conductor diameter match the dimensions required for compression or crimp F-connectors available from most AV and satellite suppliers. Strip the cable to expose 10mm of conductor, ensuring the braid does not short to the centre pin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much signal loss should I expect over a 20m run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 860MHz (typical for Freeview HD signals), the maximum attenuation is 20.1dB per 100m, so a 20m run would lose approximately 4dB. At 2150MHz (satellite LNB frequency), the loss increases to around 6.7dB over 20m. These values assume the cable is not kinked and all connectors are properly fitted.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522336011,"sku":"808.125UK","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808125UK_rb0.jpg?v=1785078023"},{"product_id":"mercury-eco-twin-rg6-coaxial-cable-aluminium-braid-black-100m-reel","title":"Mercury RG6 Twin Aluminium Coaxial Aerial Cable Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco is a twin RG6 coaxial cable supplied on a 100m reel, each core built around a 1mm solid copper-clad steel conductor wrapped in a 4.6mm foam polyethylene dielectric, an aluminium\/PET foil screen and a 64-strand aluminium braid. The two cores run parallel inside a black PVC outer jacket, providing two independent 75-ohm signal paths in a single cable run.\u003c\/p\u003e\n\u003cp\u003eDesigned for dual or quad LNB satellite dish installations and twin-camera CCTV runs where two coaxial feeds need to follow the same route, the twin construction halves the number of cable pulls needed compared to running two separate RG6 cables. The solid CCS conductor maintains signal integrity across frequencies from 5MHz to 2150MHz, with attenuation at 1GHz of 22.2dB max per 100m and a velocity factor of 83%. The aluminium braid provides shielding against RF interference.\u003c\/p\u003e\n\u003cp\u003eThe 100m reel includes cut markers at regular intervals, allowing installers to measure and cut lengths without additional tools. The foam PE dielectric reduces capacitance to 54pF\/m and improves signal speed compared to solid dielectric alternatives. The cable weighs 7.7kg on the reel and handles the typical UK satellite frequency range of 950-2150MHz used by Sky and Freesat dishes, as well as lower-frequency CCTV video signals.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e7.70KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e2 x 0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e2 x 1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e2 x 64\/0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e2 x 6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between twin RG6 and two separate RG6 cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwin RG6 runs two independent coaxial cores side by side in a single jacket. This halves the number of cable pulls needed for dual LNB satellite installations or twin CCTV camera runs, and keeps both cables aligned along the same route. Electrically, each core performs the same as a separate RG6 cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PVC outer jacket provides basic weather resistance, but for permanent outdoor runs exposed to UV the cable should be clipped to walls or run inside conduit rather than left loose. The black jacket has better UV stability than white or grey alternatives.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach core accepts standard RG6 F-type compression or crimp connectors. You will need twice as many connectors as a single-core installation. A typical dual LNB to dual-tuner setup requires four F-connectors total, one for each end of each core.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the conductor solid copper or copper-clad steel?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper-clad steel (CCS). The 1mm steel core is coated with a layer of copper. CCS provides mechanical strength for outdoor runs and long pulls while keeping weight and cost lower than solid copper. Signal performance at satellite frequencies is comparable to solid copper for runs under 100m.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522368779,"sku":"808.127UK","price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808127UK_rb0.jpg?v=1785078035"},{"product_id":"mercury-100u-foamed-pe-coaxial-cable-with-cca-braid-white-100m","title":"Mercury Foamed PE Coaxial Aerial Cable, White (100m)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury 100U is a 75-ohm coaxial cable built with a 1mm solid oxygen-free copper (OFC) conductor, 4.6mm foam polyethylene dielectric, copper foil screen and copper-clad aluminium (CCA) braid. The cable measures 6.6mm in overall diameter and is supplied on a 100m reel with a white PVC outer sheath. The construction is designed for digital TV, satellite and cable TV signal transmission where low attenuation and stable impedance are required.\u003c\/p\u003e\n\u003cp\u003eInstalled in domestic and commercial AV systems, the cable suits runs from satellite dishes to receivers, aerials to distribution amplifiers, and cable TV entry points to set-top boxes. The foam PE dielectric reduces signal loss compared to solid polyethylene cores, while the copper foil screen provides continuous shielding against interference. The CCA braid adds mechanical strength and a secondary screen layer without the weight and cost of a pure copper braid.\u003c\/p\u003e\n\u003cp\u003eThe 100m reel length allows installers to run continuous cable spans without mid-run joins, reducing potential points of signal degradation. The white sheath blends with wall surfaces and skirting boards in residential settings. Signal attenuation is rated at 6.6dB per 100m at 100MHz, rising to 32.7dB per 100m at 2150MHz, making the cable suitable for standard satellite frequency ranges up to 2.15GHz. The 75-ohm impedance matches standard F-type connectors and satellite receiver inputs.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid OFC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e64 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eCCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eCopper foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e28dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e18dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e1.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e4.7dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e9.7dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e19.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e21.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e32.7dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat applications is this cable suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Mercury 100U is designed for digital TV, satellite and cable TV signal transmission. Typical installations include runs from satellite dishes to receivers, aerial connections to distribution amplifiers, and cable TV entry points to set-top boxes in domestic and commercial AV systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does CCA braid mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCCA stands for copper-clad aluminium. The braid uses aluminium wire with a thin copper coating, providing adequate screening and mechanical strength at lower weight and cost than a pure copper braid. The solid OFC conductor remains pure copper for optimal signal transmission.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does foam PE dielectric improve performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFoam polyethylene has lower dielectric loss than solid polyethylene, reducing signal attenuation and improving the velocity factor to 83%. This means signals travel faster through the cable with less degradation over long runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors are compatible?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable's 6.6mm diameter and 75-ohm impedance match standard F-type connectors used in satellite and cable TV installations. Both compression and crimp F-connectors designed for 6-7mm coaxial cable will fit this construction.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522827531,"sku":"808.151UK","price":53.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808151UK_0.jpg?v=1784902178"},{"product_id":"mercury-100u-foamed-pe-coaxial-cable-cca-braid-black-100m","title":"Mercury 100U Foamed PE Coaxial Cable CCA Braid Black - 100m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury 100U is a 75 Ohm RG59 coaxial cable built around a 1mm solid oxygen-free copper (OFC) conductor, a 4.6mm foamed polyethylene dielectric, a copper foil screen and a copper-clad aluminium (CCA) braid. The cable measures 6.6mm in outer diameter and is supplied on a 100m reel with cut markers printed on the jacket at regular intervals to assist with measuring runs during installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for satellite dish installations where dual or quad LNBs require twin cable runs from the dish to the receiver, and for CCTV systems where coaxial connections are preferred over IP or wireless links. The 75 Ohm impedance matches standard satellite receiver inputs, F-connectors and BNC connectors used in analogue and HD-CVI CCTV cameras. The foamed PE dielectric reduces signal attenuation compared to solid polyethylene, with attenuation measured at 6.6dB per 100m at 100MHz and 21.6dB per 100m at 1000MHz.\u003c\/p\u003e\n\u003cp\u003eThe CCA braid (64 strands of 0.12mm copper-clad aluminium) provides the outer shield layer, sitting over a copper foil screen that wraps the dielectric. This dual-layer screening reduces electromagnetic interference from nearby power cables and RF sources. The black PVC jacket is rated for indoor and sheltered outdoor use where the cable is not exposed to direct UV or standing water. The 100m reel length suits typical domestic satellite dish runs of 20-40m with enough spare cable for routing through loft spaces and down walls.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid OFC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e64 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eCCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eCopper foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e28dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e18dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e1.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e4.7dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e9.7dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e19.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e21.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e32.7dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between OFC conductor and CCA braid?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe centre conductor is solid oxygen-free copper (OFC), which carries the signal with minimal resistance. The outer braid is copper-clad aluminium (CCA), which provides shielding at lower cost and weight than a full copper braid while still meeting the performance requirements for satellite and CCTV installations at the distances typical in domestic settings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe black PVC jacket is suitable for sheltered outdoor use where the cable is clipped to walls under eaves or run through conduit. It is not rated for burial or direct exposure to UV and standing water. For unsheltered outdoor runs, consider a cable with a UV-resistant jacket or install this cable inside conduit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this cable take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 6.6mm outer diameter suits standard compression F-connectors for satellite installations and crimp or compression BNC connectors for CCTV. The 1mm solid conductor and 4.6mm dielectric are standard RG59 dimensions, so most RG59-rated connectors will fit without modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much signal loss occurs over a typical satellite dish run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 30m run from dish to receiver at satellite frequencies (950-2150MHz) will see approximately 6-10dB attenuation depending on the exact frequency. This is well within acceptable limits for domestic satellite reception, where LNB output is typically 90-100dBμV and receiver sensitivity is around 50-60dBμV.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522860299,"sku":"808.153UK","price":48.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808153UK_0.jpg?v=1784902192"},{"product_id":"mercury-twin-sat-cctv-rg59-coaxial-cable-75-ohm-copper-braid-black-100m","title":"Mercury Twin RG59 Coaxial Aerial Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury twin RG59 coaxial cable runs two independent 75-ohm signal paths in a single outer jacket, each core built around a 0.65mm solid oxygen-free copper conductor, foam-filled polyethylene dielectric, copper foil screen and oxygen-free copper braid. The twin configuration supplies dual or quad LNB satellite installations where two signal runs are needed to a single receiver location, or runs two separate CCTV camera feeds back to a DVR without the need for parallel cable runs.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor and indoor runs between satellite dishes and set-top boxes, or between CCTV cameras and recording equipment, the cable maintains 75-ohm impedance across the full frequency range from 5MHz to 2150MHz. The dual shielding (foil screen plus copper braid) reduces interference pickup from nearby mains cables, RF sources and wireless signals. Supplied on a 100m reel with metric cut markers printed along the sheath, allowing accurate measurement during installation without needing a separate tape measure.\u003c\/p\u003e\n\u003cp\u003eThe foam polyethylene dielectric gives lower signal loss than solid PE alternatives, with attenuation figures of 8.9dB per 100m at 100MHz rising to 42.2dB per 100m at 2150MHz. The black PVC outer sheath has a 5mm diameter per core (approximately 10mm overall width where the two cores sit side by side), giving flexibility for wall clips and conduit routing without being bulky. The 5.7kg reel weight includes the cable only and sits comfortably on typical cable drum stands during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e2 x 0.33mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e2 x 0.65mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid OFC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e2 x 48\/0.14mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eOFC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eCopper foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e3mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e2 x 5mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e67pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e30dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e22dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e18dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e6.5dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e8.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e12.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e17.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e24.7dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e26.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e35.7dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e42.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5.70KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between twin coaxial and two separate cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwin coaxial runs two independent signal cores in a single outer jacket, halving the number of cable runs needed during installation and reducing wall clip and conduit usage. Each core is fully shielded independently, so there's no crosstalk between the two signals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for both satellite and CCTV on the same run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. One core can carry a satellite signal while the other carries a CCTV camera feed, as long as the terminations and equipment at each end are appropriate to the signal type. The 75-ohm impedance suits both applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this cable use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRG59 coaxial cable uses standard F-type connectors for satellite installations or BNC connectors for CCTV. Connectors are sold separately and are crimped or compression-fitted onto the stripped cable ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe black PVC sheath provides basic weather protection for outdoor runs, but the cable benefits from being run inside conduit or trunking where exposed to direct UV or standing water. The copper braid and foil screen are not rated for direct burial without additional protection.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522893067,"sku":"808.163UK","price":74.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808163UK_0.jpg?v=1784902207"},{"product_id":"av-link-coaxial-plug-to-plug-lead-2-0m-aerial-cable","title":"AV:Link Coaxial Plug to Plug Lead 2.0m Aerial Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis coaxial plug to plug lead from AV:Link is a standard aerial cable built for domestic signal distribution. It carries aerial (antenna) and satellite signals around the home, connecting your wall socket, TV, set-top box or other equipment. At 2.0m long, it gives you enough reach to route neatly behind furniture without excess slack to tuck away.\u003c\/p\u003e\n\u003cp\u003eThe cable has a 4.5mm diameter with a 0.5mm core and a 75Ω impedance, which is the standard rating for domestic TV and satellite work. A plug fitted at each end lets you connect straight into coaxial sockets, so it slots into most existing setups without adapters. It handles everyday jobs like linking an aerial socket to a Freeview box or running a signal from one room to the next.\u003c\/p\u003e\n\u003cp\u003eWe supply this lead in a sealed, retail friendly bag, so it stays clean and protected until you need it. The 10m version is the exception and comes packaged separately. If you are replacing an old cable or setting up new equipment, this is a straightforward choice for reliable signal at home. Keep the run as short as practical to help maintain signal quality.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.10KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e2.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore diameter\u003c\/td\u003e\n\u003ctd\u003e0.5mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length is this coaxial lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis lead is 2.0m long, giving you enough reach to connect equipment while keeping cable slack to a minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat impedance is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable is rated at 75Ω, the standard impedance for domestic TV, aerial and satellite signal work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit standard TV aerial sockets?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It has a coaxial plug at each end, so it connects directly to standard coaxial sockets on wall plates, TVs and set-top boxes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it for both aerial and satellite signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It is a standard coaxial lead suited to domestic signal distribution for aerial (antenna) and satellite equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the lead supplied?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt comes in a sealed, retail friendly bag. The 10m version is the one exception and is packaged separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the cable dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable has a 4.5mm outer diameter and a 0.5mm core diameter.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270420979979,"sku":"112.000UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112000UK_1.jpg?v=1784952679"},{"product_id":"av-link-coaxial-plug-to-plug-lead-1-0m-aerial-cable","title":"AV:Link Coaxial Plug to Plug Lead 1.0m Aerial Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is a standard coaxial lead with a plug at each end, ready for domestic signal distribution around the home. It carries aerial (antenna) and satellite signals from the wall socket to your TV, set-top box or other receiver, making it a straightforward choice for everyday connections.\u003c\/p\u003e\n\u003cp\u003eThe cable measures 1.0m and has a diameter of 4.5mm, with a 75Ω impedance that suits terrestrial and satellite feeds. The core measures 0.5mm across, giving you a lead built to the usual domestic standard. The plug to plug design means you can connect two devices directly or run the cable through an extension point without needing extra adaptors.\u003c\/p\u003e\n\u003cp\u003eWe supply this lead in a sealed retail bag, so it arrives clean and ready to use. It works well for connecting a Freeview box, satellite receiver or aerial socket, and it fits neatly behind furniture or along a skirting board. If you need a reliable coaxial lead for a short run between components, this 1.0m length keeps things tidy without excess cable to manage.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.04KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e1.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore diameter\u003c\/td\u003e\n\u003ctd\u003e0.5mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length is this coaxial lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis lead is 1.0m long, which suits short runs between a wall socket and a nearby TV or receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat impedance does the cable have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable has a 75Ω impedance, which is the standard for domestic aerial and satellite signals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this for both aerial and satellite?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It is designed for domestic signal distribution of both aerial (antenna) and satellite feeds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors are on each end?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere is a coaxial plug at each end, so it connects directly between two devices or sockets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow thick is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable has a diameter of 4.5mm with a 0.5mm core, matching the usual domestic coaxial standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it arrive?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt comes in a sealed retail bag, ready to use straight away.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270421242123,"sku":"112.002UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112002UK_1.jpg?v=1784952705"},{"product_id":"av-link-coaxial-plug-to-plug-lead-4-0m-aerial-cable","title":"AV:Link Coaxial Plug to Plug Lead 4.0m Aerial Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis coaxial lead from AV:Link connects a plug to plug across a 4.0m run, giving you a straightforward way to carry aerial (antenna) or satellite signals around the home. It fits the standard coaxial sockets found on TVs, wall plates and set-top boxes, so it slots into most domestic setups without any fuss.\u003c\/p\u003e\n\u003cp\u003eThe cable has a 4.5mm diameter with a 0.5mm core and runs at 75Ω impedance, which is the standard for TV and satellite work in the UK. That impedance match keeps signal loss low across the run, so you get a clean feed from the wall point to your equipment. At 4.0m it gives you enough reach to move a set away from the socket or route the cable neatly along skirting.\u003c\/p\u003e\n\u003cp\u003eWe supply this lead in a sealed retail bag, so it arrives clean and ready to use straight from the pack. It suits everyday jobs like linking an aerial to a television, feeding a set-top box, or distributing signal between rooms. If you need a longer option, the same lead is available in other lengths within the range.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e4.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.18KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore diameter\u003c\/td\u003e\n\u003ctd\u003e0.5mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the length of this coaxial lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis version is 4.0m long, plug to plug, giving you enough reach for most domestic setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat impedance is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt runs at 75Ω, the standard impedance for TV and satellite signal work in the UK.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I use this lead for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt suits domestic signal distribution of aerial (antenna) or satellite, such as linking an aerial to a TV or set-top box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit standard TV sockets?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it uses standard coaxial plugs that fit the sockets found on most TVs, wall plates and set-top boxes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it supplied?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt comes in a sealed retail bag, ready to use straight from the pack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable diameter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable measures 4.5mm in diameter with a 0.5mm core.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270421274891,"sku":"112.004UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112004UK_1.jpg?v=1784952730"},{"product_id":"av-link-coaxial-right-angle-plug-to-plug-lead-0-5m","title":"AV:Link Coaxial Right Angle Plug to Plug Lead 0.5m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis AV:Link coaxial lead uses right angle plugs at both ends, so it connects your TV, aerial (antenna) or set-top box while sitting flush against the wall. That makes it a good fit for wall mounted TVs, where a standard straight plug would stick out and force the set away from the surface. At 0.5m, it keeps runs short and tidy between nearby points.\u003c\/p\u003e\n\u003cp\u003eThe right angle design helps with cable management by directing the lead neatly downwards or sideways as soon as it leaves the socket. The cable has a 4.5mm diameter, an impedance of 75 Ohms and a 0.5mm core, matching the standard used across UK aerial and satellite connections. It works with the usual coaxial (coax) sockets found on televisions, digital receivers and wall plates.\u003c\/p\u003e\n\u003cp\u003eWe supply the lead in a sealed retail bag, ready to use straight away with no assembly needed. It handles everyday jobs such as linking a TV to an aerial wall point or joining two devices behind a mounted screen. If you need a plain, dependable coaxial connection that keeps things flat against the wall, this short lead does the work without fuss.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.10KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003e0.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore diameter\u003c\/td\u003e\n\u003ctd\u003e0.5mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is this coaxial lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead measures 0.5m, which suits short connections between nearby sockets or devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose right angle plugs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRight angle plugs sit flush against the wall, so they are ideal for wall mounted TVs and tidy cable management.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat impedance does the cable have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a 75 Ohm impedance, the standard for UK aerial and satellite coaxial connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my TV and aerial sockets?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it uses standard coaxial (coax) plugs that fit the usual sockets on TVs, receivers and wall plates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable diameter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable diameter is 4.5mm, with a 0.5mm core.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come ready to use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it arrives in a sealed retail bag and needs no assembly.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270421307659,"sku":"112.005UK","price":0.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112005UK_1.jpg?v=1784952757"},{"product_id":"av-link-coaxial-plug-to-plug-10m-aerial-lead","title":"AV:Link Coaxial Plug to Plug 10m Aerial Lead","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis AV:Link coaxial lead runs 10 metres from plug to plug, giving you plenty of length for connecting an aerial or satellite feed across a room. It's a standard coaxial cable built for domestic signal distribution, so it slots straight into the sort of setup most homes already have. The plugs on each end fit standard coaxial wall sockets, set-top boxes and TVs, keeping the job simple.\u003c\/p\u003e\n\u003cp\u003eThe cable measures 4.5mm in diameter with a core diameter of 0.5mm, and it runs at 75Ω impedance to match typical aerial and satellite equipment. That 75Ω rating is the usual choice for TV signal work in the UK, so you don't need to worry about mismatching your gear. The 10 metre length is handy when your socket sits some distance from the television, or when you want to route the lead neatly around skirting boards and behind furniture.\u003c\/p\u003e\n\u003cp\u003eWe supply the shorter versions of this lead in a sealed retail bag, though the 10 metre version comes without that packaging. It's a practical, no-fuss lead for everyday aerial and satellite connections at home, whether you're setting up a new TV, moving one to another wall, or replacing a lead that's seen better days. If you need a reliable coaxial run and want to keep things straightforward, this one does the job.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: length\u003c\/td\u003e\n\u003ctd\u003e10.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.42KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore diameter\u003c\/td\u003e\n\u003ctd\u003e0.5mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length is this coaxial lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the 10 metre version, plug to plug. It gives you enough reach to route the cable around a room or connect equipment that sits some way from the wall socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the impedance of the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable runs at 75Ω, which is the standard impedance for TV aerial and satellite signal work in the UK.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my TV and wall socket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Both ends have standard coaxial plugs that fit typical coaxial wall sockets, TVs and set-top boxes used for aerial and satellite feeds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this lead suitable for satellite as well as aerial?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It's a standard coaxial lead for domestic signal distribution, so it works for both aerial (antenna) and satellite connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the 10 metre version come in a sealed bag?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The shorter versions are supplied in a sealed retail bag, but the 10 metre version comes without that packaging.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270421340427,"sku":"112.006UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112006UK_1.jpg?v=1784952785"},{"product_id":"av-link-coaxial-right-angle-plug-to-plug-lead-1-0m","title":"AV:Link Coaxial Right Angle Plug to Plug Lead 1.0m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis AV:Link coaxial lead uses right angle plugs at both ends, which makes it a practical choice for wall mounted TVs and tidy cable runs. The angled connectors sit close to the wall rather than sticking straight out, so you can push furniture back and keep everything neat behind the set.\u003c\/p\u003e\n\u003cp\u003eThe lead measures 1.0m and carries a standard 75 Ohm impedance, matching the requirement for TV aerial and satellite connections in most UK homes. The cable has a 4.5mm outer diameter with a 0.5mm core, giving you a slim run that is easy to route along skirting boards or through cable tidies. Plug to plug means you connect it directly between your wall socket and the back of the TV or set top box.\u003c\/p\u003e\n\u003cp\u003eIt arrives in a sealed retail bag, so it stays clean and protected until you need it. If you are mounting a TV flush to the wall or simply want to reduce the strain that straight plugs can put on a connection, the right angle design keeps the cable close and out of the way. A straightforward lead for everyday aerial and coaxial jobs.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.10KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003e1.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore diameter\u003c\/td\u003e\n\u003ctd\u003e0.5mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length is this coaxial lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is 1.0m long, which suits short runs between a wall socket and a nearby TV or set top box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose right angle plugs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRight angle plugs sit flush against the wall, so they are ideal for wall mounted TVs and let you push furniture back closer to the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat impedance does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a standard 75 Ohm impedance, matching UK TV aerial and satellite connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable diameter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable has a 4.5mm outer diameter with a 0.5mm core, so it is slim and easy to route.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this for a TV aerial?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. This lead is designed for standard coaxial aerial (antenna) connections between a wall socket and your TV.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270421405963,"sku":"112.007UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112007UK_1.jpg?v=1784952811"},{"product_id":"av-link-coaxial-right-angle-2-0m-plug-to-plug-lead","title":"AV:Link Coaxial Right Angle 2.0m Plug to Plug Lead","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis AV:Link coaxial lead uses right angle plugs at both ends, which makes it a sensible choice when space behind your equipment is tight. The angled connectors sit flush against the wall, so it works well with wall mounted TVs where a straight plug would stick out and get in the way. At 2.0m long, it gives you enough reach for most setups without leaving too much slack to tidy away.\u003c\/p\u003e\n\u003cp\u003eThe cable has a 4.5mm diameter and a 75 Ohm impedance, which is the standard rating for aerial and coaxial connections in the UK. The 0.5mm core carries the signal from your wall socket or set-top box through to your TV or recorder. It is a straightforward, no-fuss lead that does the job it is meant to do.\u003c\/p\u003e\n\u003cp\u003eBecause the plugs are angled rather than straight, the lead is easier to route along skirting boards and around corners, which helps with cable management. It arrives in a sealed retail bag, so it is ready to use straight out of the packet. If you are mounting a TV on the wall or simply want a neater run behind your media unit, this is a practical option.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.10KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003e2.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore diameter\u003c\/td\u003e\n\u003ctd\u003e0.5mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is this coaxial lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 2.0m long, which suits most TV and aerial setups without leaving excess cable to tidy away.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the impedance rating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is rated at 75 Ohms, the standard impedance for UK aerial and coaxial connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does it have right angle plugs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe angled plugs sit flush against the wall, so they are ideal for wall mounted TVs and tight spaces where a straight plug would stick out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I connect it to?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can use it between a wall aerial socket, set-top box, recorder or TV that use standard coaxial connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the same as an antenna cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Coaxial or aerial lead in the UK is the same as an antenna cable in the US.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it arrive?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt comes in a sealed retail bag, ready to use straight from the packet.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270421569803,"sku":"112.008UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112008UK_1.jpg?v=1784952838"},{"product_id":"av-link-coaxial-plug-to-socket-extension-lead-2-0m","title":"AV:Link Coaxial Plug to Socket Extension Lead 2.0m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis coaxial extension lead from AV:Link gives you a straightforward way to add extra length between your aerial (antenna) socket and your equipment. It runs 2.0 metres from a coaxial plug at one end to a coaxial socket at the other, so you can extend an existing lead rather than replace it. It's a standard fit that works with the usual TV, set-top box and aerial connections found in most UK homes.\u003c\/p\u003e\n\u003cp\u003eThe cable measures 4.5mm in diameter, with a 75Ω impedance that matches common aerial and satellite setups. Inside, the core is 0.5mm across and the braid is made up of 16 strands at 0.10mm each, giving the shielding you'd expect from a coaxial run of this type. The plug-to-socket layout means one end pushes into your wall plate or existing socket while the other accepts your device's coaxial plug.\u003c\/p\u003e\n\u003cp\u003eIt arrives in a sealed retail bag, ready to use straight away. If you're setting up a television, a Freeview box or connecting an aerial that sits a little too far from its socket, this lead covers the gap without needing new cabling to be run. Keep it as a spare or fit it as part of a permanent setup; either way it does a simple job cleanly.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.10KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e2.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore diameter\u003c\/td\u003e\n\u003ctd\u003e0.5mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e16 x 0.10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is this coaxial lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 2.0 metres long, measured from the plug end to the socket end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a standard coaxial plug on one end and a coaxial socket on the other, so it works as an extension for an existing lead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat impedance is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable has a 75Ω impedance, which matches common aerial, TV and satellite connections used in the UK.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with Freeview and a TV aerial?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It uses a standard coaxial fit found on most UK aerial sockets, set-top boxes and televisions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this to extend an existing aerial cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The socket end accepts the plug from your current lead, letting you add 2.0 metres of reach.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it supplied?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt comes in a sealed retail bag, ready to use out of the pack.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270421602571,"sku":"112.012UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112012UK_0.jpg?v=1784952869"},{"product_id":"av-link-coaxial-f-type-plug-to-plug-5m-lead-kit","title":"AV:Link Coaxial F-type Plug to Plug 5m Lead Kit","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis AV:Link coaxial F-type lead kit gives you a straightforward way to connect satellite, cable and aerial (antenna) equipment. It includes a 5 metre F-type plug to plug lead along with an F-type coupler, so you can join two leads together or extend an existing run when you need a little more reach.\u003c\/p\u003e\n\u003cp\u003eThe cable measures 4.5mm in diameter with a 0.5mm core, and it carries a 75 ohm impedance that matches the standard used across most satellite and cable setups. That consistent impedance helps keep the signal steady between your equipment, whether you're wiring a set-top box, a satellite receiver or a coaxial socket at the wall.\u003c\/p\u003e\n\u003cp\u003eF-type connectors are the screw-on fittings you'll find on satellite and cable gear, so this kit suits home installations, upgrades and tidy replacements for worn or short leads. Everything arrives in a sealed retail bag, ready to fit. With the coupler included, you have a bit of flexibility built in from the start, making it a handy addition to any AV toolkit or spares drawer.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.27KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e5.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore diameter\u003c\/td\u003e\n\u003ctd\u003e0.5mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe F-type plug to plug lead measures 5.0 metres, which suits most runs between satellite or cable equipment and a wall socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the impedance of the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable has a 75 ohm impedance, the standard rating used for satellite, cable and aerial connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the coupler do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe included F-type coupler lets you join two F-type leads together, so you can extend the run or connect an additional cable when needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat equipment is this suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt works with satellite receivers, set-top boxes, cable boxes and any device using screw-on F-type connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable diameter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable is 4.5mm in diameter with a 0.5mm core, keeping it slim enough to route neatly behind equipment.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270421635339,"sku":"112.022UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112022UK_1.jpg?v=1784952895"},{"product_id":"av-link-f-type-to-coax-plug-aerial-lead-2-0m","title":"AV:Link F-type to Coax Plug Aerial Lead 2.0m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis AV:Link lead connects an F-type plug to a standard coaxial (coax) plug, giving you a straightforward way to route aerial and satellite signals around your setup. It measures 2.0m, which is enough to reach between wall points and equipment without leaving too much slack to tidy away. The F-type end is common on satellite receivers and modern AV gear, while the coax plug fits the aerial (antenna) sockets you'll find on many TVs and set-top boxes.\u003c\/p\u003e\n\u003cp\u003eThe cable has a 4.5mm diameter with a 0.5mm core, and it runs at 75Ω impedance, which is the standard for aerial and satellite work. That match means the lead sits happily in most home distribution setups without adding avoidable signal loss along its length. Because it pairs the two most widely used connector types, it's a practical option when you need to bridge kit that doesn't share the same socket.\u003c\/p\u003e\n\u003cp\u003eWe supply the lead in a sealed retail bag, so it arrives clean and ready to plug in. It works with the majority of modern AV equipment, making it a useful spare to keep on hand for signal distribution around the home. Whether you're linking a satellite box to a TV or feeding an aerial signal through to another room, this 2.0m length covers the common short-run jobs without fuss.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.07KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e2.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore diameter\u003c\/td\u003e\n\u003ctd\u003e0.5mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has an F-type plug on one end and a standard coaxial (coax) plug on the other, so it bridges the two most common aerial and satellite connector types.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead is 2.0m long, which suits short runs between wall sockets and AV equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the impedance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt runs at 75Ω, the standard impedance for aerial and satellite signal distribution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with my TV and satellite box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's compatible with the majority of modern AV equipment, so it works with most TVs, satellite receivers and set-top boxes that use these connector types.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable diameter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable has a 4.5mm outer diameter with a 0.5mm core.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it supplied?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt comes in a sealed, retail-friendly bag, so it's clean and ready to use on arrival.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270421668107,"sku":"112.028UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112028UK_1.jpg?v=1784952926"},{"product_id":"av-link-coaxial-f-type-plug-to-plug-flylead-2-0m","title":"AV:Link Coaxial F-type Plug to Plug Flylead 2.0m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is a standard coaxial F-type plug to plug flylead from AV:Link, measuring 2.0 metres. Both ends are fitted with F-type plugs, so you can connect satellite receivers, cable boxes and other equipment that uses this common screw-on connector. The cable itself has a 4.5mm diameter and a 75 ohm impedance, which matches the standard used across most home satellite and cable setups.\u003c\/p\u003e\n\u003cp\u003eThe internal build uses a 0.5mm diameter core with a 16 x 0.10mm braid, giving you a straightforward signal path between your devices. F-type is the same connector you will find on the back of most satellite dishes and cable modems, and the screw-on fitting keeps the connection secure once it is in place. It is a simple, no-fuss lead for everyday use around the home or in an installation.\u003c\/p\u003e\n\u003cp\u003eThis 2.0 metre length gives you a bit of room to route the cable neatly without excess slack. The lead is supplied in a retail friendly sealed bag, ready to fit straight out of the pack. If you need a spare or a replacement F-type lead, this is a reliable choice.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.12KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: length\u003c\/td\u003e\n\u003ctd\u003e2.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore diameter\u003c\/td\u003e\n\u003ctd\u003e0.5mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e16 x 0.10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has an F-type screw-on plug at each end, the standard connector used on most satellite receivers and cable equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis version is 2.0 metres long, giving you enough length to route the cable tidily between devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the impedance of the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable has a 75 ohm impedance, which matches the standard used in home satellite and cable systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable diameter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable is 4.5mm in diameter, with a 0.5mm core and a 16 x 0.10mm braid.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this with my satellite receiver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. As long as your equipment uses F-type plug connections, this lead will connect straight up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the lead supplied?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt comes in a retail friendly sealed bag, ready to use out of the pack.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270421700875,"sku":"112.030UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112030UK_1.jpg?v=1784952954"},{"product_id":"av-link-coaxial-f-type-plug-to-plug-flylead-4-0m","title":"AV:Link Coaxial F-type Plug to Plug Flylead 4.0m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis AV:Link coaxial flylead connects two F-type plug fittings and runs 4.0 metres between them. It is a standard patch lead for satellite receivers, cable boxes and similar equipment that use screw-on F connectors, giving you a straightforward way to join two points without splicing or adapters.\u003c\/p\u003e\n\u003cp\u003eThe cable itself has a 4.5mm outer diameter with a 0.5mm central core and 75 ohm impedance, which is the usual rating for domestic satellite and broadband coaxial work. Screening comes from a 16 by 0.10mm braid that helps keep signal loss and interference down over the length of the run. Both ends terminate in F-type plugs, so you simply hand-tighten them onto matching sockets.\u003c\/p\u003e\n\u003cp\u003eIt arrives in a sealed retail bag, so it is ready to sit on a shelf or go straight into your kit box. We supply it as a plain, working lead for anyone setting up a satellite feed, extending a signal to another room or replacing a lead that has seen better days. If you need a shorter or longer run, the same lead is offered in other lengths across the range.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.22KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: length\u003c\/td\u003e\n\u003ctd\u003e4.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: diameter\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore diameter\u003c\/td\u003e\n\u003ctd\u003e0.5mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e16 x 0.10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length is this flylead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt runs 4.0 metres from plug to plug. Other lengths are available across the range if you need something shorter or longer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth ends have F-type plugs, which screw on by hand to matching F-type sockets found on satellite receivers, cable boxes and similar gear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the impedance of the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable is rated at 75 ohm, the standard impedance for domestic satellite and broadband coaxial connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow thick is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe outer diameter is 4.5mm, with a 0.5mm central core and a 16 by 0.10mm braid for screening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come packaged for retail?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it is supplied in a sealed retail-friendly bag, so it is ready for display or storage.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270421733643,"sku":"112.032UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112032UK_1.jpg?v=1784952980"},{"product_id":"av-link-coaxial-f-type-plug-to-plug-flylead-10m","title":"AV:Link Coaxial F-type Plug to Plug Flylead 10m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis AV:Link coaxial flylead runs from an F-type plug to an F-type plug over a 10 metre length. It is a standard coaxial cable for connecting satellite receivers, cable boxes and other equipment that uses screw-on F connectors. The plugs at each end thread directly onto the matching sockets, so you get a firm fit without loose push-on ends working their way free.\u003c\/p\u003e\n\u003cp\u003eThe cable has a 4.5mm outer diameter and a 75Ω impedance, which is the standard for satellite and cable TV signal work. Inside sits a 0.5mm copper core with a 16 x 0.10mm braid for screening, helping keep the signal clean along the run. At 10 metres, this length suits situations where the dish or wall point sits some distance from the receiver.\u003c\/p\u003e\n\u003cp\u003eF-type connectors are used across satellite and cable installations in both the UK and US, so the same lead works with common equipment on either side. This 10 metre version is supplied without the retail sealed bag that the shorter leads come in. If you need a straightforward replacement or a longer run for a fixed install, this covers the job with no fuss.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.52KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e10.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore diameter\u003c\/td\u003e\n\u003ctd\u003e0.5mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e16 x 0.10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this lead use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a screw-on F-type plug at each end, the standard connector for satellite receivers and cable boxes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis version is 10 metres long, suited to runs where the wall point sits well away from the receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the impedance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable is rated at 75Ω, which is the standard impedance for satellite and cable TV signal work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with my satellite receiver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, if your equipment uses F-type screw-on sockets, which most satellite and cable boxes do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the 10m version come in a sealed bag?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The shorter leads are supplied in a retail sealed bag, but the 10 metre version is not.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270421799179,"sku":"112.034UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112034UK_1.jpg?v=1784953006"},{"product_id":"av-link-rg6-75-ohm-coaxial-plug-to-plug-lead-2-0m","title":"AV:Link RG6 75 Ohm Coaxial Plug to Plug Lead 2.0m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis AV:Link RG6 coaxial lead connects plug to plug over a 2.0m run, giving you a straightforward way to carry aerial (antenna) and satellite signals between your wall socket, set top box or TV. It uses a 75 Ohm design, which is the standard impedance for TV and satellite work in the UK, so it drops into most home setups without any fuss.\u003c\/p\u003e\n\u003cp\u003eThe cable is built around a solid copper clad steel (CCS) conductor with a foamed polyethylene dielectric. Around that sits an aluminium foil screen and a copper clad steel braid, both held under a PVC sheath. That combination of foil and braid cuts down noise reaching the conductor, which keeps digital, satellite and cable TV signals clean over the length of the run. The plugs are nickel plated coax connectors, fitted at both ends and ready to use.\u003c\/p\u003e\n\u003cp\u003eThe conductor measures 1mm in diameter and the braid is made up of 48 strands of 0.1mm wire. The finished cable has an overall diameter of 6.8mm, so it stays neat behind furniture and through cable runs. It arrives in a sealed retail bag, ready to plug in and go. If you need to link a TV to an aerial point or feed a signal from one room to another, this lead does the job with no extra adaptors needed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.20KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.8mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat impedance is this coaxial lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is a 75 Ohm cable, which is the standard impedance for UK TV, aerial and satellite connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis version is 2.0m from plug to plug, giving you enough reach for most home setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat signals can it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe foil screen and braid reduce noise, making it suitable for digital, satellite and cable TV signal transmission.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth ends are fitted with nickel plated coax plugs, so it connects straight to standard aerial and satellite sockets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses a solid copper clad steel conductor, foamed polyethylene dielectric, aluminium foil screen, copper clad steel braid and a PVC sheath.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow thick is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe overall cable diameter is 6.8mm, so it stays tidy behind furniture and through cable runs.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270425895179,"sku":"112.148UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112148UK_0.jpg?v=1784954327"},{"product_id":"av-link-rg6-75-ohm-coaxial-plug-to-plug-lead-10m","title":"AV:Link RG6 75 Ohm Coaxial Plug to Plug Lead 10m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis AV:Link RG6 coaxial lead runs 10 metres between two plugs, giving you a straightforward connection for digital, satellite and cable TV signals. It uses a 75 Ohm design, which is the standard impedance for TV and satellite work, so it drops into most home setups without any adaptors. The lead comes with nickel plated coax plugs fitted at both ends, ready to connect your wall socket, set-top box or splitter.\u003c\/p\u003e\n\u003cp\u003eThe construction is built around a solid copper clad steel (CCS) conductor measuring 1mm in diameter, wrapped in a foamed polyethylene (PE) dielectric. Over that sits an aluminium foil screen and a copper clad steel braid made up of 48 strands at 0.1mm each. This double layer of screen and braid cuts down noise reaching the conductor, which helps keep your picture and signal clean over the full length of the run. A PVC sheath protects everything, and the finished cable measures 6.8mm across.\u003c\/p\u003e\n\u003cp\u003eAt 10 metres, this length suits jobs where the aerial (antenna) point sits some distance from the TV, or where you need to route the lead around a room. Shorter versions in this range come in a sealed retail bag, though the 10m is supplied loose. If you need a longer coaxial run for a fixed install or a temporary setup, this lead gives you a reliable link without the signal drop-off you get from thinner, unshielded cable.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e10.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.8mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the impedance of this coaxial lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is a 75 Ohm lead, which is the standard impedance for TV, satellite and cable connections in UK homes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat signals will this lead carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe screen and braid make it suitable for digital, satellite and cable TV signal transmission.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat type of plugs are fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth ends have nickel plated coax plugs already fitted, so no assembly is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis lead is 10 metres long, plug to plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the conductor made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses a solid copper clad steel (CCS) conductor with a 1mm diameter, plus a CCS braid of 48 strands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the 10m version come in a sealed bag?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the 10m lead is supplied loose. The shorter lengths in this range come in a sealed retail bag.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270426026251,"sku":"112.154UK","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112154UK_0.jpg?v=1784954409"},{"product_id":"av-link-rg6-f-type-plug-to-plug-2m-coaxial-lead","title":"AV:Link RG6 F-type Plug to Plug 2m Coaxial Lead","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis AV:Link RG6 coaxial lead runs F-type plug to plug over a 2.0m length, giving you a straightforward connection for digital, satellite and cable TV signals. It is built to a 75 Ohms rating, which is the standard used across TV and satellite equipment, so it slots in wherever an F-type coaxial (coax) connection is needed. The plugs are nickel plated for a reliable fit onto your wall socket, receiver or splitter.\u003c\/p\u003e\n\u003cp\u003eThe construction uses a solid copper clad steel (CCS) conductor with a foamed polyethylene dielectric around it. On top of that sits an aluminium foil screen and a copper clad steel braid, followed by a PVC sheath. That combined foil and braid layer cuts down on noise reaching the conductor, which helps keep the signal clean on digital and satellite feeds where interference can cause dropouts or pixelation.\u003c\/p\u003e\n\u003cp\u003eThe cable measures 6.8mm in diameter with a 1mm conductor and a 48 x 0.1mm braid, so it stays flexible enough to route behind furniture or along skirting without much fuss. It arrives in a sealed retail bag, ready to fit between your aerial outlet, satellite box or cable modem. If you need a clean run from wall plate to set-top box, this is a practical fit.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.20KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.8mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is this lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is 2.0m from plug to plug, which suits most short runs between a wall socket and a nearby TV, satellite box or cable modem.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the F-type connector used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eF-type plugs are the screw-on connectors found on satellite receivers, cable boxes and many aerial outlets. This lead has an F-type plug at both ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for satellite TV?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 75 Ohms RG6 build with foil and braid screening is intended for digital, satellite and cable TV signal transmission.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the 75 Ohms rating mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is the impedance standard used across TV, aerial and satellite gear. Matching this rating keeps signal loss and reflections to a minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the screening reduce noise?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn aluminium foil screen and a copper clad steel braid surround the conductor, cutting down interference that can cause picture break-up on digital feeds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this for a cable modem?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, as long as your modem uses an F-type coaxial input. The lead handles cable TV and broadband coax connections.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270426059019,"sku":"112.158UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112158UK_0.jpg?v=1784954435"},{"product_id":"av-link-coaxial-to-rca-plug-games-console-lead-2-0m","title":"AV:Link Coaxial to RCA Plug Games Console Lead 2.0m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis AV:Link lead connects vintage games consoles to a display using a coaxial plug at one end and an RCA plug (also called a phono plug) at the other. It's a straightforward solution for hooking up older hardware that relies on this pairing, letting you get retro consoles running on a modern or period-correct screen.\u003c\/p\u003e\n\u003cp\u003eThe cable measures 2.0m, giving you room to position the console comfortably in front of the display without pulling on the connectors. The coaxial plug fits the aerial-style input found on many older sets, while the RCA plug handles the signal on the console side. Both ends are moulded for a secure, reliable fit each time you connect.\u003c\/p\u003e\n\u003cp\u003eWe supply the lead in a sealed retail bag, so it arrives clean and ready to use. If you're setting up an old console for gaming sessions or simply keeping vintage kit working, this lead does the job without any fuss. Keep one spare and you'll always have a way to link your hardware to a screen.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does this lead connect?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt connects vintage games consoles to a display, using a coaxial plug on one end and an RCA plug on the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lead measures 2.0m, giving you space to position the console away from the screen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is an RCA plug?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn RCA plug, sometimes called a phono plug, is a common connector used for audio and video signals on older equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the coaxial plug fit my display?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt fits the aerial-style coaxial input found on many older television sets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the lead supplied?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt comes in a sealed retail bag, so it arrives clean and ready to use.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270426091787,"sku":"112.166UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112166UK_0.jpg?v=1784954455"},{"product_id":"mercury-st36b-amplified-indoor-tv-aerial","title":"Mercury ST36B Amplified Indoor TV Aerial","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury ST36B is a mains powered indoor TV aerial with a built-in amplifier, made for picking up Digital Terrestrial TV along with DAB and FM radio. It works with signals within a 45 to 65 mile radius, so it suits homes that sit at a fair distance from the transmitter or that struggle with weaker reception. The high gain, low noise amplifier gives you 36dB of gain to help pull in a usable picture where a passive aerial might fall short.\u003c\/p\u003e\n\u003cp\u003eYou get two aerials in one unit. The adjustable loop handles UHF TV signals and both pans and tilts, so you can angle it for the best reception in your room. Two 728mm telescopic antennas cover VHF and FM radio, and you can extend and position these separately. A variable gain control knob on the unit lets you dial the amplification up or down by hand, and a power LED shows you when the aerial is running. An integrated LTE filter helps keep 4G and 5G mobile signals from interfering with your TV picture.\u003c\/p\u003e\n\u003cp\u003ePower comes from 230Vac at 50Hz, or 12Vdc at 50mA, and the aerial draws only 50mA in use. It works across UHF (470 to 694MHz) and VHF (40 to 230MHz) frequencies with a 75 ohm impedance to match standard coax. The unit measures 195 x 144 x 230mm, weighs 500g and comes with a 1.2m lead. Because reception in any given spot depends on your location and how close you are to the transmitter, we'd suggest trying it in a few positions to find where the signal is strongest.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range: UHF\u003c\/td\u003e\n\u003ctd\u003e470-694MHz(5G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range: VHF\u003c\/td\u003e\n\u003ctd\u003e40-230MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReception distance\u003c\/td\u003e\n\u003ctd\u003eUp to 65 miles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGain\u003c\/td\u003e\n\u003ctd\u003e36dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent consumption\u003c\/td\u003e\n\u003ctd\u003e50mA @12Vdc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e230Vac, 50Hz or 12Vdc 50mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003e1.2m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e195mm x 144mm x 230mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.50KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/120503UK_ec027cde-b6d3-4160-93d5-05edb409926e.pdf?v=1784957621\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow far from the transmitter will this aerial work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's rated for signals within roughly a 45 to 65 mile radius. Actual reception depends on your location, local obstructions and transmitter strength, so results can vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need mains power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it's an amplified aerial. It runs from 230Vac at 50Hz, or from 12Vdc at 50mA, so the amplifier needs a power supply to work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it pick up radio as well as TV?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adjustable loop handles UHF TV signals, while the two 728mm telescopic antennas receive VHF and FM radio, including DAB.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the LTE filter do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt helps block interference from 4G and 5G mobile signals, which can otherwise disrupt your TV reception in some areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I adjust the amplification?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. A variable gain control knob on the unit lets you increase or reduce the gain by hand, up to 36dB, to suit your local signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I get the best reception?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePosition the loop and telescopic antennas, then try a few spots in the room. Signal strength varies with location, so a little repositioning often helps.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270436413707,"sku":"120.503UK","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/120503UK_0.jpg?v=1784957635"},{"product_id":"mercury-st36p-loop-indoor-hdtv-aerial-with-dab","title":"Mercury ST36P Loop Indoor HDTV Aerial with DAB","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury ST36P is an indoor TV aerial (antenna) built around a loop design that suits modern rooms without taking up much space. It works with both digital terrestrial TV and DAB\/FM radio, so you can use one unit for your television and your radio. An integrated performance oscillator helps give a clearer HD picture, and two extendable antenna sit alongside the loop to lift VHF reception for better radio signals.\u003c\/p\u003e\n\u003cp\u003eSetup is plug and play. You connect the 1.8m RF (coaxial) lead to your TV or radio, position the aerial and tune in. That lead length gives you room to place the aerial away from other devices that might cause interference, which often makes the difference between a steady picture and a patchy one. Reception is designed for use within a 35 to 45 mile radius of your local transmitter, so it works best if you're not too far out.\u003c\/p\u003e\n\u003cp\u003eThe aerial covers a VHF frequency range of 87.5 to 230MHz and UHF from 470 to 694MHz, with a 75 Ohm impedance and gain of 3 to 6dB. It measures 146 x 200 x 53mm and weighs 172g, so it stays put on a shelf or unit while remaining easy to reposition. If you want a straightforward indoor aerial that handles both TV and radio in one, the ST36P is a sensible choice for areas with reasonable signal coverage.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003eVHF: 87.5-230MHz, UHF: 470-694MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReception distance\u003c\/td\u003e\n\u003ctd\u003eUp to 45 miles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGain\u003c\/td\u003e\n\u003ctd\u003e3-6dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003e1.8m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e146mm x 200mm x 53mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.17KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the ST36P pick up radio as well as TV?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It supports DAB and FM radio broadcasts alongside digital terrestrial TV, and the two extendable antenna help boost VHF signals for clearer radio reception.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow far from a transmitter can I be?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's designed for use within a 35 to 45 mile radius of your local transmitter. Reception is best when you're within that range and have a clear line to the transmitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the aerial cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ST36P comes with a 1.8m RF (coaxial) lead. This lets you place the aerial away from other devices that could cause interference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it easy to set up?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It's plug and play. Connect the coaxial lead to your TV or radio, position the aerial and run a channel scan to tune in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat frequencies does it cover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt covers VHF from 87.5 to 230MHz and UHF from 470 to 694MHz, with a 75 Ohm impedance and gain of 3 to 6dB.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere should I place the aerial for the best signal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNear a window and away from other electronic devices usually gives the best results. The 1.8m lead makes it easy to try a few positions.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270436479243,"sku":"120.507UK","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/120507UK_0.jpg?v=1784957676"},{"product_id":"mercury-st25p-paper-thin-transparent-indoor-tv-aerial","title":"Mercury ST25P Paper-thin Transparent Indoor TV Aerial","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury ST25P is a lightweight, paper-thin aerial (antenna) that you can fix to a window or an outside-facing wall. At just 0.5mm thick and 60g, it sits flat against the glass and stays out of the way. The transparent design means it won't block your view or draw attention, so you can keep it tidy in a living room or bedroom without it dominating the space.\u003c\/p\u003e\n\u003cp\u003eIt receives Digital Terrestrial TV as well as DAB and FM radio signals within a 35 to 45 mile radius of your transmitter, with a gain of 6 to 8 dB across the VHF (47-230MHz) and UHF (470-694MHz) bands. An integrated LTE filter helps keep 4G and 5G mobile signals from causing interference, which is worth having if you live near a mast. The 75 Ohm impedance suits standard UK TV and radio equipment.\u003c\/p\u003e\n\u003cp\u003eSetting it up is straightforward. The aerial comes with an extra-long 3m RF (coaxial) lead, so you have room to move it to the spot in your home where reception is best, which is often near a window facing the transmitter. Its small footprint (228 x 128mm) makes it easy to conceal behind curtains or along a frame. If your signal is marginal or you're a long way from a transmitter, position matters, so give yourself time to test a couple of locations before fixing it in place.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003eVHF: 47-230MHz, UHF: 470-694MHz (5G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReception distance\u003c\/td\u003e\n\u003ctd\u003eUp to 45 miles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGain\u003c\/td\u003e\n\u003ctd\u003e6-8dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e228mm x 128mm x 0.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.06KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/120515UK_e5ca83e8-d427-42f5-88d5-80feb74f8187.pdf?v=1784957699\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhere should I fit the ST25P?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFix it to a window or an outside-facing wall, ideally facing your local transmitter. The 3m lead lets you try a few positions to find the strongest signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat signals does it receive?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt picks up Digital Terrestrial TV and DAB\/FM radio within roughly a 35 to 45 mile radius of your transmitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it help with 4G\/5G interference?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It has an integrated LTE signal filter that reduces interference from nearby 4G and 5G mobile signals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it really see-through?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the aerial has a transparent design and is just 0.5mm thick, so it stays discreet against a window and won't restrict your view.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the supplied cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt comes with a 3m RF (coaxial) lead, giving you plenty of room to position the aerial away from the TV point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for weak signal areas?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith 6 to 8 dB gain and up to 45 miles of reach, it works best in areas with reasonable coverage. In marginal areas, test several positions before fixing it.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270436512011,"sku":"120.515UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/120515UK_0.jpg?v=1784957717"},{"product_id":"mercury-st04p-portable-uhf-mast-tv-aerial-magnetic-base","title":"Mercury ST04P Portable UHF Mast TV Aerial, Magnetic Base","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury ST04P is a compact, portable UHF mast aerial (antenna) built for digital HDTV reception on the move. It's lightweight at just 100g and measures 160 x 70 x 70mm, so it packs down small and sits easily on a shelf, dashboard or roof. The design suits portable TVs and laptop TV tuners, making it a practical choice for both the home and the road.\u003c\/p\u003e\n\u003cp\u003eA magnetic base lets you fix the aerial to metal surfaces, using that surface area to help pull in a cleaner signal. That makes it a sensible fit for the roof of a car, truck, campervan or motorhome. The 3m RF coaxial lead gives you plenty of slack to position the mast where reception is strongest, then run the cable back to your set. Setup is plug and play, with no tuning boxes or extra kit to worry about.\u003c\/p\u003e\n\u003cp\u003eIt receives Digital Terrestrial TV broadcasts within roughly a 30 to 35 mile radius of a transmitter, working across the UHF band from 470 to 694MHz at 75 Ohms impedance and 2 to 4 dB gain. An integrated LTE filter helps keep 4G and 5G mobile signals from interfering with your picture. With an IPX4 rating it copes with splashes and light weather, so occasional outdoor use is fine. It's a small aerial that covers a lot of everyday viewing situations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : UHF\u003c\/td\u003e\n\u003ctd\u003e470-694MHz (5G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReception distance\u003c\/td\u003e\n\u003ctd\u003eUp to 35 miles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGain\u003c\/td\u003e\n\u003ctd\u003e2-4dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e3m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIPX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e160mm x 70mm x 70mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.10KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/120525UK_551d6485-0745-4521-90cc-612d4fce5421.pdf?v=1784957740\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow far from a transmitter will it work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt receives Digital Terrestrial TV within about a 30 to 35 mile radius. Reception depends on your location, terrain and how well you can position the mast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the magnetic base need a metal surface?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe magnet holds the aerial firmly on metal surfaces, and using that surface area can help improve reception. On non-metal surfaces you can still stand it upright, but you lose that benefit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe RF coaxial lead is 3m long, which gives you room to place the aerial for the best signal and run the cable back to your TV or tuner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with a laptop TV tuner?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It's designed for portable TVs and laptop TV tuners as well as standard sets, using a plug and play connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it filter out mobile signal interference?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. An integrated LTE filter helps block interference from nearby 4G and 5G mobile signals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt carries an IPX4 rating, so it handles splashes and light weather. It suits occasional outdoor and roof use rather than permanent fixed installation.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270436544779,"sku":"120.525UK","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/120525UK_0.jpg?v=1784957761"},{"product_id":"mercury-st07p-omni-directional-indoor-tv-aerial","title":"Mercury ST07P Omni-Directional Indoor TV Aerial","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury ST07P is an indoor TV aerial built to sit neatly in any room and pick up your local Freeview channels. Its omni-directional design means it receives signals from all directions, so you don't need to keep repositioning it to chase the transmitter. That makes it a straightforward choice if you want digital terrestrial TV without a rooftop setup.\u003c\/p\u003e\n\u003cp\u003eSetup is plug and play. The included 1.5m RF (coaxial) lead gives you room to place the aerial away from other devices that might cause interference, then connect it to your TV and scan for channels. An integrated LTE filter keeps 4G and 5G mobile signals from interfering with your reception, which helps if you live near a mast. Reception reaches up to 45 miles from the transmitter, though your actual results depend on your distance and local conditions.\u003c\/p\u003e\n\u003cp\u003eOn the technical side, the ST07P covers the UHF band from 470 to 694MHz with 75 Ohm impedance and a gain of 3 to 7 dB, matching standard UK TV connections. It measures 200 x 87 x 87mm and weighs 375g, so it takes up little space on a shelf or beside your set. The design is kept plain so it fits alongside your existing home devices rather than standing out. For anyone wanting simple indoor Freeview reception, it does the job without fuss.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range: UHF\u003c\/td\u003e\n\u003ctd\u003e470-694MHz (5G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReception distance\u003c\/td\u003e\n\u003ctd\u003eUp to 45 miles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGain\u003c\/td\u003e\n\u003ctd\u003e3-7dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: length\u003c\/td\u003e\n\u003ctd\u003e1.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e200mm x 87mm x 87mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.38KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/120530UK_77f7fbff-d743-456c-817f-952d60a655fe.pdf?v=1784957783\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow far from the transmitter will this aerial work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ST07P is rated for reception up to 45 miles, typically working best within a 35 to 45 mile radius. Your actual range depends on local terrain, obstructions and how close you are to the transmitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a power supply?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a passive aerial with plug and play operation. You connect the coaxial lead to your TV and scan for channels, with no external power needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill 4G or 5G signals interfere with reception?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has an integrated LTE signal filter designed to reduce interference from 4G and 5G mobile signals, which helps if you live near a mobile mast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe aerial comes with a 1.5m RF (coaxial) lead, giving you some flexibility to position it away from other devices for better reception.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to point it at the transmitter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The omni-directional design receives signals from all directions, so you don't need to aim it at a specific transmitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connection does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses a standard coaxial (RF) connection with 75 Ohm impedance, which fits the aerial input on UK TVs.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270436806923,"sku":"120.530UK","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/120530UK_0.jpg?v=1784957802"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/collections\/8_48b3a15a-0bda-4f7b-8935-4718616020a7.png?v=1785158345","url":"https:\/\/niori.co.uk\/collections\/tv-aerials-brackets.oembed?page=3","provider":"Niori","version":"1.0","type":"link"}