{"title":"TV \u0026 Aerials","description":"\u003cp\u003eOur range of TV and aerial equipment covers everything between the signal and the screen: aerials for Freeview reception, distribution amplifiers and splitters for feeding several rooms, coaxial cable and connectors, wall brackets to mount the television, and projector screens where a bigger picture is wanted. Found it cheaper elsewhere? We will match the price.\u003c\/p\u003e","products":[{"product_id":"av-link-twin-rg6-satellite-extension-kit-1m","title":"AV:Link Twin RG6 Satellite Extension Kit - 1m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link twin RG6 satellite extension kit provides 1m of twin satellite cable with pre-fitted F-type connectors on both ends, plus two F-type couplers for joining to existing cable runs. The kit is designed for short-distance relocation of Sky or Freesat boxes when repositioning equipment without running entirely new cable through walls or ceilings.\u003c\/p\u003e\n\u003cp\u003eEach of the two RG6 cables carries one satellite feed, allowing dual-LNB or dual-tuner installations to be extended in a single run. The 75-ohm impedance and aluminium foil screen maintain signal integrity across the short 1m length, preventing picture degradation or loss of channels. The F-type connectors use a threaded zinc alloy body that screws directly onto F-type sockets on satellite receivers, LNB outputs or wall plates without requiring additional tools or crimping.\u003c\/p\u003e\n\u003cp\u003eThe two included F-type couplers (female-to-female threaded barrels) allow the 1m extension to be joined inline with existing satellite cables, which is useful when a receiver needs to be moved slightly further from its current position but a full re-cable is impractical. The twin cable construction keeps both feeds together, reducing clutter and simplifying routing behind TV units or along skirting boards.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1m\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is this kit used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit extends the distance between a satellite LNB feed and a Sky or Freesat receiver by 1m. It is typically used when relocating a set-top box to a new position on the same wall or to an adjacent surface without re-running the entire cable from the dish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the connectors need tools to fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The F-type connectors are pre-fitted to the cable ends and screw onto F-type sockets by hand. The two included couplers also use hand-tightened threaded connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable and connectors are not rated for outdoor or damp environments. Use this kit indoors only, between the wall plate and the receiver or between indoor junction points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are there two cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDual-LNB satellite dishes and dual-tuner receivers require two separate feeds to receive the full range of channels and support recording one channel while watching another. The twin construction keeps both feeds together.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313045266699,"sku":"112.021UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112021UK_LD2_49fbb910-83c4-43d8-846f-9b4ce2356d63.jpg?v=1715187253"},{"product_id":"av-link-twin-rg6-satellite-extension-kit-3m","title":"AV:Link Twin RG6 Satellite Extension Kit - 3m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link twin RG6 satellite extension kit provides 3m of twin coaxial cable with pre-fitted F-type connectors and two F-type couplers for extending or relocating satellite receivers. Each cable carries a 1mm copper-clad steel (CCS) conductor surrounded by 4.6mm foam polyethylene dielectric, aluminium foil screen and aluminium braid, giving 75 ohm impedance for digital satellite signal transmission.\u003c\/p\u003e\n\u003cp\u003eDesigned for Sky and Freesat box installations where the existing cable run is too short, the kit allows the receiver to be moved to a different room or position without re-running cable from the LNB. The pre-fitted F-type connectors screw directly onto the receiver's input ports, while the two included F-type couplers join the extension cable to the existing cable run. This avoids the need for crimping or soldering on site.\u003c\/p\u003e\n\u003cp\u003eThe twin cable configuration carries two independent signals. Typically used for dual-tuner receivers that record one channel while watching another, or for connecting two separate outputs from a quad LNB to a single receiver. The 6.6mm diameter per cable is standard RG6 gauge, matching most UK satellite installations installed since the mid-2000s. The zinc alloy F-type connectors resist corrosion better than brass-plated steel in damp environments such as loft spaces.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.25KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e2 x 6.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eCCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e64 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAlumnium foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eF type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector material\u003c\/td\u003e\n\u003ctd\u003eZinc alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included in the kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit contains one 3m twin RG6 cable with pre-fitted F-type connectors at both ends (four connectors total, two per cable end) and two F-type barrel couplers for joining to existing cable runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with my existing satellite cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit works with any standard RG6 coaxial cable fitted with F-type connectors. If your existing cable has a different connector type or is a different gauge, you may need an adapter or a different extension solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable and connectors are rated for indoor use and sheltered outdoor runs such as under eaves or in conduit. For fully exposed outdoor runs, use a kit with weatherproof connectors and UV-resistant cable jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does twin cable mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwin cable carries two independent coaxial cables side-by-side, typically used for dual-tuner satellite receivers that need two separate LNB outputs to record one channel while watching another.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313046544651,"sku":"112.023UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112023UK_0.jpg?v=1784888815"},{"product_id":"av-link-coaxial-y-splitter-1-plug-to-2-sockets","title":"AV:Link Coaxial Y Splitter - 1 Plug to 2 Sockets","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link coaxial Y splitter takes one incoming aerial signal and splits it to two output sockets, allowing a single TV aerial or FM radio antenna to feed two separate devices. The splitter has one male coaxial plug on the input side and two female coaxial sockets on the output side, both using standard RF connectors compatible with UK aerial cable.\u003c\/p\u003e\n\u003cp\u003eDesigned for domestic TV and radio installations where one aerial feed needs to supply two rooms or two devices in the same room, the Y splitter provides passive signal distribution without requiring external power. The splitter works with both digital Freeview TV signals and analogue FM radio signals, though splitting the signal between two devices will reduce the signal strength to each output compared to a direct connection.\u003c\/p\u003e\n\u003cp\u003eThe metal-bodied construction and threaded F-type connectors provide a more secure connection than push-fit alternatives, reducing the risk of loose contacts that cause picture breakup or radio interference. The compact hexagonal body measures approximately 40mm across the widest point, with the three connector ports arranged at 120-degree intervals to minimise strain on connected cables.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoaxial (Aerial)\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes splitting the signal reduce quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each output receives approximately half the signal strength of the input. In areas with strong aerial signals this is rarely noticeable, but in weak-signal areas it may cause picture breakup on digital TV or poor reception on FM radio. If signal loss is a problem, consider an active aerial amplifier instead of a passive splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe splitter is not weatherproof and is intended for indoor use only. For outdoor signal splitting, use a weatherproof junction box or an external aerial amplifier rated for outdoor installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with satellite signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This splitter is designed for terrestrial TV aerial and FM radio signals only. Satellite signals require a different type of splitter that can pass DC voltage to the LNB.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan more than two devices be connected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot directly. For distribution to three or more devices, use a dedicated multi-way aerial splitter or distribution amplifier designed for that purpose.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313110606091,"sku":"122.048UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122048UK_0.jpg?v=1784889355"},{"product_id":"av-link-coaxial-y-splitter-1-plug-2-sockets","title":"AV:Link Coaxial Y-Splitter 1 Plug 2 Sockets","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link coaxial Y-splitter has one male coaxial plug (input) and two female coaxial sockets (outputs), allowing a single aerial or FM radio feed to be distributed to two devices. The splitter body is a moulded plastic hexagon with three nickel-plated coaxial connectors: one on the left for the incoming signal, and two at angles on the right for the outgoing feeds.\u003c\/p\u003e\n\u003cp\u003eCommon applications include splitting a rooftop TV aerial to feed two televisions in different rooms, or splitting an FM radio aerial to supply two hi-fi tuners without running separate cables from the aerial point. The splitter introduces approximately 3-4dB signal loss on each output due to passive splitting, so the incoming signal strength must be sufficient to maintain picture or sound quality on both connected devices.\u003c\/p\u003e\n\u003cp\u003eThe nickel-plated connectors resist corrosion and provide stable RF contact. The splitter accepts standard F-type or Belling-Lee coaxial plugs (depending on the specific connector standard used in your installation) and fits behind wall plates or within AV cabinets where space is limited. Supplied in a sealed bag.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoaxial (Aerial)\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the splitter amplify the signal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a passive splitter, which means it divides the incoming signal between the two outputs without amplification. Each output receives approximately half the input signal strength, resulting in a 3-4dB loss per output. If the incoming signal is weak, you may need an amplified splitter or a separate signal booster.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat type of coaxial connector does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe product image shows standard coaxial barrel connectors. Confirm the specific connector type (F-type or Belling-Lee) before ordering if your installation requires a particular standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for satellite signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePassive coaxial splitters are generally not suitable for satellite signals because satellite installations often require specific voltage and tone signalling to control LNBs. This splitter is designed for terrestrial TV and FM radio aerial splitting only.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313110704395,"sku":"122.051UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122051UK_0.jpg?v=1784889369"},{"product_id":"mercury-2-way-satellite-f-splitter-5-2250mhz","title":"Mercury 2-Way Satellite F Splitter 5-2250MHz","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury 2-way satellite F splitter divides a single satellite feed into two outputs, allowing two receivers to connect to one dish through F-type coaxial connectors. The splitter supports frequencies from 5MHz to 2250MHz, covering standard satellite TV bands including Ku-band (10.7-12.75GHz downconverted to IF) and L-band signals from LNBs.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and light commercial satellite installations, the splitter fits into standard coaxial runs between an LNB and two receivers or set-top boxes. The zinc die-cast housing provides RF shielding to reduce interference and maintains impedance matching across the frequency range. The F-type connectors accept standard satellite coaxial cable with push-fit or threaded connection depending on the cable type used.\u003c\/p\u003e\n\u003cp\u003eThe splitter introduces signal loss (insertion loss) across both outputs, which is a normal characteristic of passive RF splitting. Most domestic satellite installations can accommodate this loss without needing additional amplification, provided the incoming signal strength from the LNB is adequate. For installations with long cable runs or multiple splits, checking signal levels after installation ensures reliable reception.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003e5MHz - 2250MHz\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan I connect two satellite boxes to one dish using this splitter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided both receivers are viewing channels from the same polarisation and frequency band at the same time. For independent viewing (different channels simultaneously), a twin or quad LNB on the dish is required instead, giving each receiver its own dedicated feed. A splitter shares one LNB output between two receivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cables does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe F-type connectors accept standard satellite coaxial cable (typically RG6 or CT100). The connectors are compatible with both push-fit F-connectors and threaded F-connectors depending on the cable preparation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the splitter need power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The Mercury is a passive splitter and does not require external power. It allows DC power pass-through from the receiver to the LNB on one output path, so ensure the powered receiver connects to the DC-pass port if your installation uses LNB power from the receiver.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313120534795,"sku":"122.807UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122807UK_0.jpg?v=1784885564"},{"product_id":"stv203-3-way-satellite-f-splitter-5-2450mhz","title":"STV203 3-Way Satellite F Splitter 5-2450MHz","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe STV203 is a 3-way satellite F splitter that divides one satellite feed into three separate outputs, operating across the 5-2450MHz frequency range. The unit features F-type threaded connectors on all four ports (one input, three outputs) and incorporates power pass functionality on every output, allowing voltage to pass through to LNBs on all connected receivers simultaneously.\u003c\/p\u003e\n\u003cp\u003eDesigned for multi-receiver satellite installations in homes, flats, caravans and commercial properties, the STV203 allows three satellite receivers or set-top boxes to operate from a single dish feed without requiring additional cabling runs. The zinc die-cast housing measures approximately 60mm x 40mm and mounts to walls or joists using the two flanged mounting tabs, each with a 6mm hole. The compact footprint suits installation behind wall plates or within distribution cabinets.\u003c\/p\u003e\n\u003cp\u003eThe 5-2450MHz bandwidth covers both standard satellite TV frequencies and the extended range used by modern Sky Q and Freesat systems. Power pass on all outputs means the splitter does not block the DC voltage that receivers send back up the coax to power the LNB at the dish, making it compatible with most domestic satellite setups. The unit carries CE certification under G687 659D and uses a zinc alloy body for shielding and durability.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003e5MHz - 2250MHz\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this splitter work with Sky Q systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 5-2450MHz frequency range covers the extended bandwidth used by Sky Q and other modern satellite systems. The power pass on all outputs allows voltage to reach the LNB from any connected receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill I lose signal strength when splitting to three outputs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome signal loss is inherent in any passive splitter. The STV203 divides the input signal across three outputs, which reduces the level at each receiver compared to a direct connection. For installations where receivers are close to the dish and signal strength is already good, this is rarely an issue. In marginal signal areas, amplification may be needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this to split terrestrial TV aerial signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe STV203 is designed for satellite installations and uses F-type connectors rather than the coax plugs typical of terrestrial aerial systems. While the frequency range technically covers terrestrial TV bands, the connector type makes it impractical for standard aerial distribution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the splitter mounted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo flanged mounting tabs with 6mm holes allow the unit to be screwed to a wall, joist or the back of a distribution cabinet. The compact size also allows it to be tucked behind wall plates or inside joinery where space is limited.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313123090699,"sku":"122.823UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122823UK_0.jpg?v=1784889778"},{"product_id":"stv-204-4-way-satellite-f-splitter-5-2250mhz","title":"STV 204 4-Way Satellite F Splitter 5-2250MHz","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe STV 204 is a 4-way satellite F splitter that distributes signal from a single satellite dish input to four independent receiver outputs across a frequency range of 5-2250MHz. Each output port features power pass capability, allowing receivers to send power back to the LNB at the dish head without blocking other receivers on the same splitter.\u003c\/p\u003e\n\u003cp\u003eMade for multi-room satellite installations where a single dish serves several receivers, the splitter fits between the dish cable run and the individual receiver feeds. The central input port connects to the dish LNB, while the four output ports run to separate set-top boxes or satellite receivers in different rooms. The power pass diagram printed on the faceplate shows the signal path and confirms which ports support LNB power injection.\u003c\/p\u003e\n\u003cp\u003eThe die-cast metal housing provides RF shielding to prevent signal leakage and interference between adjacent cables. All five F-connector ports are threaded for secure cable connections, and the two mounting lugs on either side allow the splitter to be fixed to a wall or inside a distribution cabinet. The unit carries CE certification and complies with German broadcast equipment standard BZT 660D.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003e5MHz - 2250MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with Sky Q and Freesat receivers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 5-2250MHz range covers both standard Ku-band satellite signals and the extended frequencies used by modern LNBs. The power pass on all ports supports systems where receivers need to communicate with or power the LNB.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan all four outputs supply power to the LNB simultaneously?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach output port supports power pass, but typically only one receiver sends power at a time. The STV 204 routes that power back to the input port and onwards to the LNB regardless of which output port the powered receiver is connected to.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat signal loss occurs when splitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 4-way passive splitter introduces approximately 7-8dB insertion loss per output. If you find weak signal on some receivers after installation, consider upgrading to a higher-gain LNB or adding a line amplifier before the splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need external power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The STV 204 is a passive splitter and draws no mains power. The power pass feature refers to DC voltage sent by the receiver to the LNB, not to powering the splitter itself.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313123156235,"sku":"122.838UK","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122838UK_CO1_19405c1f-634e-4a70-b1c4-1344346d07c0.jpg?v=1715187973"},{"product_id":"mercury-amd02-2-way-vhf-uhf-distribution-amplifier-with-dc-pass","title":"Mercury AMD02 2-Way VHF\/UHF Distribution Amplifier with DC Pass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury AMD02 is a 2-way VHF\/UHF distribution amplifier that splits a single aerial input to two outputs plus one full-gain output, delivering 20dB full gain and 12dB per split output. Separate VHF (47-230MHz) and UHF (470-694MHz) inputs allow the unit to handle terrestrial TV and radio signals from dedicated aerials or a combined feed, while an integrated LTE filter blocks mobile network interference in the 694MHz+ range that can disrupt Freeview reception.\u003c\/p\u003e\n\u003cp\u003eDesigned for smaller domestic installations where an aerial signal needs splitting to two or three rooms, the AMD02 fits in loft spaces, behind wall-mounted TVs or on shelving near the entry point of the aerial cable. The DC pass function allows satellite control signals to pass through the unit when paired with a Magic Eye extender or similar device, so Sky boxes or Freeview boxes with IR extenders can still send remote control commands back through the same coaxial cable. The side-mounted F-type coaxial terminals accept standard coaxial connectors and the unit includes two F-type adaptors.\u003c\/p\u003e\n\u003cp\u003eThe fully screened metal housing reduces signal leakage and external interference pickup, while surge and short-circuit protection prevent damage from transient voltage spikes or wiring faults during installation. The 1m mains cable connects to any standard UK 230V socket and the compact 135 x 70 x 45mm footprint allows the amplifier to be mounted in tight spaces. Maximum output level of 94dBuV and noise below 3.8dB ensure stable signal delivery to connected equipment without visible degradation on Freeview HD channels.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : VHF\u003c\/td\u003e\n\u003ctd\u003e47 - 230MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : UHF\u003c\/td\u003e\n\u003ctd\u003e470-694MHz(5G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull gain output\u003c\/td\u003e\n\u003ctd\u003e20dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e22dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;3.8dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e2 x coax sockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e230Vac, 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e1.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130030UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the split outputs and the full-gain output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe two split outputs (TV1 and TV2) each deliver 12dB gain, while the full-gain output delivers the full 20dB. The full-gain output is typically used for the longest cable run or the room requiring the strongest signal, while the split outputs handle shorter runs to secondary TVs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the LTE filter affect normal Freeview channels?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The integrated LTE filter blocks mobile network frequencies above 694MHz, which fall outside the Freeview UHF band (470-694MHz). All standard Freeview and Freeview HD channels pass through unaffected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this with satellite signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The AMD02 is designed for VHF\/UHF terrestrial aerial signals only. Satellite signals operate at much higher frequencies (950-2150MHz) and require a dedicated satellite distribution amplifier or splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does DC pass allow?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDC pass allows control signals (typically 9V or 12V DC) to pass through the amplifier in reverse, enabling devices like Sky Magic Eye extenders or remote control IR extenders to send commands back to a set-top box via the same coaxial cable that carries the TV signal.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313154547979,"sku":"130.030UK","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130030UK_0.jpg?v=1784890126"},{"product_id":"mercury-amd04-4-way-vhf-uhf-distribution-amplifier-with-dc-pass","title":"Mercury AMD04 4-Way VHF\/UHF Distribution Amplifier with DC Pass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury AMD04 is a 4-way VHF\/UHF distribution amplifier with separate inputs for VHF (47-230MHz) and UHF (470-694MHz) signals, an integrated LTE filter to block 5G\/4G mobile interference, and DC pass capability for satellite control via Magic Eye systems. The unit provides four split outputs at 8dB gain each, plus one full gain output at 20dB, allowing simultaneous distribution to four TVs or radio receivers with a fifth full-strength feed for further distribution or signal analysis.\u003c\/p\u003e\n\u003cp\u003eDesigned for multi-room residential installations, holiday lets, care homes and small commercial premises requiring stable terrestrial TV and radio distribution, the AMD04 amplifies incoming aerial signals and splits them without the degradation that passive splitters introduce. The wideband low-noise amplifier maintains consistent signal quality across all outputs, while 22dB isolation between outputs prevents one receiver from affecting another. The LTE filter cuts mobile phone mast interference that can disrupt digital TV reception in areas with strong 4G\/5G coverage.\u003c\/p\u003e\n\u003cp\u003eThe black metal enclosure measures 180 x 70 x 45mm and mounts via side terminals for wall or cabinet installation. All connections are coaxial sockets with F-type adaptors supplied for standard coax plugs. The DC pass allows satellite dish LNB power and control signals to pass through the amplifier when using combined terrestrial and satellite setups. Surge protection and short-circuit limiting prevent damage from lightning strikes or wiring faults. The unit runs on 230V AC mains via a 1m attached power lead.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : VHF\u003c\/td\u003e\n\u003ctd\u003e47 - 230MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : UHF\u003c\/td\u003e\n\u003ctd\u003e470-694MHz(5G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull gain output\u003c\/td\u003e\n\u003ctd\u003e20dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e22dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;3.8dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e2 x coax sockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e230Vac, 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e1.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130031UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the LTE filter do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integrated LTE filter blocks 4G and 5G mobile phone signals that can interfere with digital TV reception. In areas with strong mobile mast coverage, these signals can cause picture freezing or complete loss of certain TV channels. The filter removes this interference before amplification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this with a satellite dish and aerial together?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The DC pass allows LNB power and control signals from a satellite receiver to pass through the amplifier to the dish via the aerial cable. This is useful in combined terrestrial\/satellite setups where Magic Eye remote extenders are used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the split outputs and the full gain output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe four split outputs each provide 8dB gain and are intended for connecting TVs or radios directly. The fifth full gain output provides 20dB and can be used for a further amplifier or splitter in larger installations, or for a primary TV that needs maximum signal strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the unit installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AMD04 mounts via side terminals on the enclosure, allowing it to be screwed to a wall, inside a cabinet, or onto a board in a plant room. All connections are coaxial sockets. VHF and UHF inputs on one side, five outputs on the other. F-type adaptors are supplied for standard coax plugs. The 1m power lead connects to a standard 230V mains socket.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313154580747,"sku":"130.031UK","price":28.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130031UK_0.jpg?v=1784890137"},{"product_id":"mercury-amd06-6-way-vhf-uhf-distribution-amplifier-with-dc-pass","title":"Mercury AMD06 6-Way VHF\/UHF Distribution Amplifier with DC Pass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury AMD06 is a 6-way VHF\/UHF distribution amplifier designed to split a single aerial signal across six output points plus one full-gain output, maintaining signal strength and picture quality across multiple TV or radio receivers. The unit accepts separate VHF (47-230MHz) and UHF (470-694MHz) inputs and provides 20dB full gain output, compensating for the signal loss that occurs when splitting coaxial cable across multiple rooms or devices.\u003c\/p\u003e\n\u003cp\u003eBuilt for domestic and light commercial installation. Multi-room homes, care facilities, small hotels, student accommodation. The AMD06 reduces snow, pixelation and intermittent signal drop-out on secondary TV points fed from a shared rooftop aerial. The integrated 5G\/4G LTE filter blocks mobile network interference in the 694MHz+ band, preventing picture breakup caused by nearby phone masts. DC pass functionality allows Magic Eye remote satellite control signals to travel back through the amplifier to a Sky or Freesat box located elsewhere in the property.\u003c\/p\u003e\n\u003cp\u003eThe metal housing is fully screened to prevent RF leakage and external interference, and side-mounted terminals allow coaxial cables to be routed cleanly without crossing in front of the unit when wall-mounted. Surge and short-circuit protection prevents amplifier damage from lightning strikes on the aerial or accidental wiring faults. The amplifier ships with four F-type adaptors for converting between coaxial plug and socket terminations depending on the existing cabling. At 225 x 70 x 45mm and 420g, the unit mounts in a loft, understairs cupboard or communications cabinet using the integral keyhole slots on the rear panel.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : VHF\u003c\/td\u003e\n\u003ctd\u003e47 - 230MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : UHF\u003c\/td\u003e\n\u003ctd\u003e470-694MHz(5G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull gain output\u003c\/td\u003e\n\u003ctd\u003e20dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e22dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;3.8dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e2 x coax sockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e230Vac, 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e1.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130032UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the full gain output and the six split outputs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe full gain output provides the entire 20dB amplified signal without splitting loss, typically used for the primary TV or for feeding a secondary amplifier. The six split outputs each receive 8dB gain after the signal has been divided, which is still sufficient for most domestic TV points on cable runs up to 20-30 metres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with both Freeview and satellite?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AMD06 amplifies terrestrial VHF and UHF signals from a rooftop aerial. This covers Freeview TV and DAB\/FM radio. It does not amplify satellite signals. The DC pass function allows Magic Eye or similar remote control signals to pass back through the amplifier to a satellite receiver located elsewhere, but the satellite signal itself must be distributed separately using a satellite-grade splitter or multiswitch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the LTE filter useful?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe built-in 5G\/4G LTE filter blocks mobile network frequencies above 694MHz. In areas close to phone masts, mobile signals can bleed into the UHF TV band and cause picture breakup, pixelation or complete loss of certain Freeview channels. The filter prevents this interference without affecting the wanted TV signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The AMD06 is designed for indoor installation in a dry location such as a loft, understairs cupboard or communications cabinet. The unit requires mains power via the supplied 1m cable and is not weatherproof.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313154613515,"sku":"130.032UK","price":31.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130032UK_0.jpg?v=1784890148"},{"product_id":"mercury-amd08-8-way-vhf-uhf-distribution-amplifier-with-dc-pass","title":"Mercury AMD08 8-Way VHF\/UHF Distribution Amplifier with DC Pass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury AMD08 is an 8-way VHF\/UHF distribution amplifier with separate VHF and UHF inputs, delivering 20dB gain on the full output and 8dB gain per split across eight individual outputs. The unit accepts VHF signals from 47-230MHz and UHF signals from 470-694MHz, with an integrated 5G\/4G LTE filter blocking mobile signal interference before amplification. A DC pass function allows satellite control signals to pass through for Magic Eye remote extenders.\u003c\/p\u003e\n\u003cp\u003eDesigned for multi-room TV and radio distribution in residential and light commercial installations, the AMD08 takes a single aerial signal and distributes it to up to nine outputs (eight individual plus one full-gain output for cascading to additional distribution equipment). The side-mounted terminals simplify cable management in cabinet or wall-mounted installations, while the coaxial socket connections accept standard F-type connectors (four F-type adaptors included).\u003c\/p\u003e\n\u003cp\u003eThe fully screened metal housing blocks external interference and works with Digital Terrestrial (Freeview), satellite systems, cable TV, and DAB\/FM radio signals. The low-noise wideband amplifier maintains a noise figure below 3.8dB, while surge and short-circuit protection with a maximum 87dBuV output limiter prevents damage to downstream equipment. The 75-ohm impedance matches standard UK aerial and distribution cabling. At 270 x 70 x 45mm and 500g, the unit mounts discreetly in loft spaces, cupboards or AV cabinets.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : VHF\u003c\/td\u003e\n\u003ctd\u003e47 - 230MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : UHF\u003c\/td\u003e\n\u003ctd\u003e470-694MHz(5G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull gain output\u003c\/td\u003e\n\u003ctd\u003e20dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e22dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;3.8dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e2 x coax sockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e230Vac, 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e1.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130033UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the individual outputs and the full gain output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe eight individual outputs each deliver 8dB gain and are designed for connecting directly to TVs or radios. The full gain output delivers 20dB and is typically used to cascade into another distribution amplifier or booster when more than eight outputs are needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with Freeview and satellite signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The amplifier works with Digital Terrestrial (Freeview), satellite, cable TV, and DAB\/FM radio signals. The separate VHF and UHF inputs allow terrestrial aerial signals to be connected independently, while the DC pass supports satellite Magic Eye remote extenders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the LTE filter do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integrated 5G\/4G LTE filter blocks interference from mobile phone signals before amplification. This prevents picture break-up or signal dropout caused by nearby mobile phone masts transmitting in adjacent frequency bands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable connections does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe amplifier uses coaxial socket connections compatible with standard F-type plugs. Four F-type adaptors are included in the box to convert the sockets for use with traditional coax plugs if needed.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313154679051,"sku":"130.033UK","price":35.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130033UK_0.jpg?v=1784890159"},{"product_id":"av-link-precision-coaxial-socket-nickel-plated-brass-bulk","title":"AV:Link Precision Coaxial Socket - Nickel Plated Brass (Bulk)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link precision coaxial socket is a nickel-plated brass coaxial connector designed for aerial and RF signal distribution installations. The socket accepts standard coaxial plugs (male connectors) and provides a secure push-fit connection for TV aerials, satellite dishes, and radio antenna systems operating on VHF, UHF and FM frequencies.\u003c\/p\u003e\n\u003cp\u003eSold in bulk for installation projects requiring multiple connection points, the socket suits residential aerial distribution systems, multi-room TV installations, communal aerial systems in apartment blocks, and commercial AV distribution racks. The threaded body allows the socket to be panel-mounted or fitted to junction boxes, providing a fixed connection point where coaxial cable runs terminate.\u003c\/p\u003e\n\u003cp\u003eThe nickel-plated brass construction resists corrosion better than uncoated brass or zinc alloy alternatives, maintaining conductivity over time when exposed to indoor humidity or outdoor weather in protected enclosures. The plating also reduces signal loss at the connector interface compared to lower-grade materials. The precision-machined centre pin ensures consistent contact with the plug, minimising signal reflection and interference in the connection.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoaxial (Aerial)\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable does this socket accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket accepts standard coaxial plugs (male connectors) fitted to coaxial cable such as RG6, CT100, or WF100. The plug fitting must match the socket diameter. This is a standard UK\/EU coaxial socket compatible with most domestic aerial and satellite plugs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe nickel-plated brass construction resists corrosion, but the socket is not IP-rated for direct weather exposure. It can be used in outdoor enclosures or junction boxes that protect the connection from rain and moisture ingress.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for satellite as well as aerial?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The socket handles the frequency range used by both terrestrial TV aerials (VHF\/UHF) and satellite dishes (950-2150 MHz). It provides a passive connection point and does not filter or attenuate signals within the broadcast spectrum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between bulk and retail packaging?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBulk packaging typically means the sockets are supplied in plain bags or boxes without individual retail packaging, reducing cost per unit for installation projects requiring multiple connectors. The product itself is identical to retail-packaged versions.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313480261899,"sku":"766.086UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/766086UK_0.jpg?v=1784899605"},{"product_id":"av-link-coaxial-female-to-female-coupler","title":"AV:Link Coaxial Female to Female Coupler","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link coaxial coupler is a back-to-back adapter with female coaxial F-type threaded sockets at both ends, designed to join two coaxial leads together. The coupler uses a nickel-plated brass barrel to maintain signal integrity across the join, preventing degradation when extending aerial cables or repositioning TV and FM radio connections.\u003c\/p\u003e\n\u003cp\u003eCommon applications include extending aerial runs between wall plates and TV tuners, joining short coaxial leads into a longer run during temporary installations, and connecting coaxial cables where a direct wall-to-device run is not possible. The threaded F-type sockets ensure a secure mechanical connection that resists loosening under normal handling and cable weight. The coupler works with standard 75-ohm coaxial cables carrying Freeview, satellite, and FM radio signals.\u003c\/p\u003e\n\u003cp\u003eThe compact barrel design minimises the footprint behind wall-mounted TVs and inside AV cabinets. The nickel plating on the brass body provides corrosion resistance and consistent conductivity over time, maintaining the shielding needed to prevent interference on terrestrial and satellite TV signals. The coupler is passive. It does not amplify or attenuate signals, so it suits runs where cable length and signal strength are already within acceptable tolerances.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoaxial (Aerial)\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable type does this work with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe coupler accepts standard F-type threaded coaxial plugs, which are used on most modern TV aerial and satellite cables in UK installations. It does not work with older push-fit Belling-Lee (IEC) coaxial connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it affect signal quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe coupler is passive and does not amplify or filter the signal. A well-made join will have minimal signal loss, but any join in a coaxial run introduces a small amount of insertion loss. If you are already close to the minimum signal threshold for reliable reception, adding a coupler may degrade performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for satellite as well as terrestrial TV?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The coupler supports both terrestrial Freeview signals and satellite signals (Sky, Freesat) on 75-ohm coaxial cables with F-type connectors.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313480425739,"sku":"766.299UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/766299UK_0.jpg?v=1784899616"},{"product_id":"av-link-f-connector-twist-on-for-rg58-5mm-cable","title":"AV:Link F Connector Twist-On for RG58 5mm Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link F connector is a twist-on termination for RG58 coaxial cable with a 5mm outer diameter. The connector threads onto the prepared cable end without requiring crimping tools, compression fittings or soldering, making it suitable for field installations and repairs where specialist tools are not available.\u003c\/p\u003e\n\u003cp\u003eDesigned for satellite TV, aerial and RF signal distribution systems, the connector accepts the 5mm diameter RG58 cable commonly used in dual satellite LNB installations and domestic aerial runs. The twist-on mechanism grips the cable braid and seats the centre conductor in the pin, forming both the shield connection and the signal path. Once threaded on, the connector forms an F-type male termination compatible with standard F-type sockets on satellite receivers, distribution amplifiers and wall plates.\u003c\/p\u003e\n\u003cp\u003eThe connector body is formed from nickel-plated metal with a threaded collar that engages the F-type socket. AV:Link specifies compatibility with their 808.107UK, 808.109UK and 808.163UK dual satellite cables, all of which share the 5mm RG58 construction. The twist-on design allows the connector to be removed and refitted if the cable needs to be re-terminated or re-routed during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eF Type (Cable \u0026amp; Satellite)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this require any special tools to fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connector threads onto the prepared cable end by hand. You will need a cable stripper or sharp knife to prepare the RG58 cable (strip back the outer jacket, fold back the braid, strip the dielectric to expose the centre conductor), but no crimping or compression tools are needed to attach the connector itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable diameter does it fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is sized for RG58 coaxial cable with a 5mm outer diameter. It will not fit larger cables such as RG6 (6.15mm) or smaller cables such as RG174 (2.8mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be reused if I need to re-terminate the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The twist-on mechanism allows the connector to be unscrewed from the cable and refitted, provided the cable end has not been damaged during removal. This makes it suitable for installations where cables may need to be re-routed or adjusted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it weatherproof for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is not specified as weatherproof. For outdoor or exposed installations, the F-type connection should be housed inside a weatherproof enclosure or sealed with self-amalgamating tape and heat-shrink to prevent moisture ingress.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313481474315,"sku":"770.150UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/770150UK_0.jpg?v=1784899663"},{"product_id":"av-link-stv19f-f-connector-twist-on-for-rg6-and-ct100-cable-bulk-pack","title":"AV:Link F Connector Twist-On RG6 Aerial Cable Fitting","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link STV19F is a twist-on F connector designed for RG6 and CT100 type coaxial cables with outer diameters between 6.5mm and 7mm. The connector body is machined from zinc alloy with a threaded outer barrel that twists onto the prepared cable end, compressing an internal gripping ring around the cable's outer jacket for a secure mechanical and electrical connection.\u003c\/p\u003e\n\u003cp\u003eUsed in residential and commercial satellite, cable TV and aerial installations, the STV19F provides a reusable connection that can be hand-tightened without specialist crimping tools. The twist-on design allows the connector to be fitted on-site during cable runs, useful when pre-terminated cables would be impractical. The F connector standard is widely compatible with UK satellite receivers, distribution amplifiers, wall plates and splitters expecting a threaded coaxial connection.\u003c\/p\u003e\n\u003cp\u003eThe zinc alloy body provides corrosion resistance and shielding continuity across the connector barrel. The bulk pack format supplies multiple connectors for installers working across several rooms or properties, reducing per-unit cost compared to retail-packaged singles. Each connector weighs approximately 8g and adds roughly 30mm of length to the cable end once fitted.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eF Type (Cable \u0026amp; Satellite)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable types does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe STV19F fits RG6 and CT100 type coaxial cables with outer jacket diameters between 6.5mm and 7mm. These are the standard cables used in UK satellite and aerial installations. It does not fit smaller RG59 or larger WF100 cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a crimping tool?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connector is hand-tightened by twisting the threaded barrel onto the prepared cable end. The internal gripping mechanism compresses around the cable jacket as the barrel is rotated, forming the connection without additional tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the connector be reused?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The twist-on design allows the connector to be unscrewed from the cable end and refitted or moved to a different cable section if needed, though repeated removal may reduce grip strength over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many connectors are in the bulk pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bulk pack typically contains 25 or 50 connectors depending on stock variant. Contact us if you require a specific quantity or need confirmation of pack size before ordering.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313481539851,"sku":"770.152UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/770152UK_0.jpg?v=1784899679"},{"product_id":"av-link-f-plug-to-coax-tv-plug-adaptor","title":"AV:Link F Plug to Coax TV Plug Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link F plug to coax TV plug adaptor converts a satellite F connector into a standard coaxial TV plug, allowing satellite equipment to connect to aerial sockets designed for standard coax fittings. The adaptor features a female F socket on one end and a male coaxial TV plug on the other, with a nickel-plated brass body and knurled grip section for hand-tightening.\u003c\/p\u003e\n\u003cp\u003eDesigned for domestic satellite installations where the existing wall socket or extension cable uses a coax TV socket rather than an F connector, the adaptor suits set-top boxes, satellite receivers and distribution amplifiers. The brass construction maintains signal integrity across the connection and resists corrosion in indoor installations. The knurled section provides grip when connecting or disconnecting by hand, removing the need for tools in typical residential use.\u003c\/p\u003e\n\u003cp\u003eThe nickel plating over the brass body gives a silver-chrome finish that matches most satellite and AV equipment housings. The adaptor adds approximately 35mm to the overall connection length once fitted, which should be factored into tight installation spaces behind wall-mounted TVs or in shallow AV cabinets. Signal loss across the adaptor is minimal for typical domestic satellite frequencies between 950MHz and 2150MHz.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoaxial (Aerial)\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this adaptor convert between?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne end is a female F socket (the type used on satellite equipment and coax cable), the other end is a male coaxial TV plug (the type that pushes into a standard UK TV aerial socket).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with Freesat and Sky boxes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Most satellite receivers output via an F connector, so if your wall socket or extension cable uses a standard coax TV socket, this adaptor allows the connection to be made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it affect signal quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSignal loss across the adaptor is minimal for satellite frequencies (950-2150MHz). The nickel-plated brass construction maintains impedance matching and reduces reflections compared to lower-grade adaptors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much length does it add to the connection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor adds approximately 35mm once the F plug is screwed into the socket and the coax plug is inserted into the wall socket. This should be considered in tight spaces behind TVs or in shallow cabinets.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313481769227,"sku":"775.085UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/775085UK_0.jpg?v=1784899720"},{"product_id":"av-link-coaxial-plug-to-f-socket-adaptor","title":"AV:Link Coaxial Plug to F Socket Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link coaxial plug to F socket adaptor converts a standard coaxial TV plug (male) into an F-type socket (female), allowing satellite and aerial cables with F-type connectors to connect to devices with coaxial sockets. The metal-bodied construction provides RF shielding and maintains signal integrity for both digital and analogue transmissions.\u003c\/p\u003e\n\u003cp\u003eUsed primarily in satellite TV installations, cable distribution systems, and aerial setups where equipment uses mixed connector types, the adaptor allows a coaxial-fitted device to accept an F-type cable without re-terminating. Common applications include connecting satellite receivers, TV amplifiers, and distribution boxes where the input and output connector types don't match. The threaded F socket accepts standard F-type plugs and provides a more secure connection than push-fit coaxial alternatives.\u003c\/p\u003e\n\u003cp\u003eThe compact 30mm length and metal barrel keep the adaptor unobtrusive when fitted behind wall-mounted screens or in equipment racks. The nickel-plated finish resists corrosion in indoor installations and maintains low contact resistance over time. The adaptor is passive, requiring no power and adding no active components into the signal path.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoaxial (Aerial)\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between coaxial and F-type connectors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCoaxial TV plugs are push-fit connectors used on standard aerial cables in the UK. F-type connectors have a threaded coupling nut and are used on satellite cables and some distribution systems. This adaptor bridges the two, allowing a coaxial plug to connect to equipment fitted with an F socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with both satellite and aerial signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adaptor is passive and suitable for both terrestrial TV signals (aerial) and satellite signals (typically 950-2150 MHz). It adds minimal signal loss when used with properly terminated cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe nickel-plated metal body provides some corrosion resistance, but the adaptor is designed for indoor use. For outdoor installations, use weatherproof F-type connectors and cable glands rated for exterior use.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313481801995,"sku":"775.421UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/775421UK_0.jpg?v=1784899731"},{"product_id":"mercury-rg59b-u-75-ohm-coaxial-cable-black-100m-reel","title":"Mercury RG59B\/U 75 Ohm Coaxial Cable - Black 100m Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury RG59B\/U is a 75 Ohm coaxial cable built around a solid 0.8mm oxygen-free copper (OFC) conductor, a foam-filled polyethylene dielectric of 3.7mm diameter, an aluminium\/PET foil screen, and a 48-strand OFC braid. The cable maintains 75 Ohm impedance across video frequencies and ships on a 100m reel with metric cut markers printed along the sheath.\u003c\/p\u003e\n\u003cp\u003eDesigned for CCTV camera runs, video signal transmission, and RF distribution in residential, commercial and industrial installations, the RG59B\/U handles analogue video, HD-TVI, HD-CVI and AHD signals. The foam PE dielectric reduces signal loss compared to solid dielectric cables, while the dual-layer screen (foil plus braid) provides effective rejection of electromagnetic interference from mains cables, fluorescent lighting and wireless sources. The 6mm overall cable diameter fits standard F-type connectors and BNC crimp terminals.\u003c\/p\u003e\n\u003cp\u003eThe solid OFC conductor eliminates the strand-to-strand contact resistance that occurs in multi-strand cables, reducing attenuation at higher frequencies. At 1000MHz the cable shows a maximum attenuation of 24.7dB per 100m, falling to 7.3dB per 100m at 100MHz and 2.8dB per 100m at 5MHz. The 83% velocity factor and 67pF\/m capacitance produce low signal delay and minimal distortion on typical CCTV runs of 50-150m. The black PVC sheath is UV-stabilised for outdoor use when run in conduit or clipped to external walls.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat video signals does RG59B\/U support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRG59B\/U carries analogue CCTV, HD-TVI, HD-CVI, AHD and composite video signals. It is also used for satellite IF distribution and RF transmission at frequencies up to 2150MHz. It does not carry IP\/Ethernet signals. Those require Cat5e\/Cat6 cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this cable use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 6mm diameter fits standard BNC crimp or twist-on connectors and F-type connectors for satellite and RF applications. Compression F-type connectors provide the most reliable termination for outdoor runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum recommended run length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor analogue CCTV and HD analogue formats (HD-TVI, HD-CVI), typical maximum runs are 150-200m before signal degradation becomes noticeable. For higher frequencies (satellite IF, 2150MHz) the higher attenuation limits runs to 50-80m depending on signal strength at the source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe black PVC sheath is UV-stabilised and suitable for outdoor use when run in conduit, clipped to external walls, or installed in cable trunking. Direct burial is not recommended unless the cable is run inside protective ducting.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313521844491,"sku":"808.101UK","price":33.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808101UK_LD1_d484cdc8-8549-40f1-8ab6-5fc6ea28a006.jpg?v=1715194896"},{"product_id":"mercury-eco-rg6-air-spaced-pe-coaxial-cable-cca-braid-black-100m","title":"Mercury Eco RG6 Air Spaced PE Coaxial Cable CCA Braid Black 100m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco RG6 is a 75-ohm coaxial cable built with a solid copper-clad steel conductor, air-spaced polyethylene dielectric, aluminium foil screen, copper-clad aluminium braid and black PVC outer sheath. The combined screen and braid reduce electromagnetic interference to the signal path, making the cable suitable for digital terrestrial TV, satellite dish feeds and cable TV installations.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial fixed installations, the cable arrives on a 100m reel with metric cut markers printed along the sheath to simplify measuring and cutting during installation runs. The 6.6mm overall diameter fits standard F-type compression connectors and screw-on connectors used in satellite and aerial systems. The air-spaced dielectric construction reduces signal attenuation compared to solid foam PE designs across the 5-2150MHz range used by UK satellite and digital TV signals.\u003c\/p\u003e\n\u003cp\u003eThe copper-clad aluminium braid (48 strands of 0.12mm wire) provides 60-70% coverage around the foil screen, balancing shielding effectiveness with cable flexibility. The solid copper-clad steel centre conductor carries the signal with a cross-sectional area of 0.79mm² and impedance matched to 75 ohms. Return loss is rated at 24dB minimum per 100m between 5-400MHz, reducing to 16dB minimum per 100m at 1000-2150MHz. Attenuation ranges from 2.9dB\/100m at 5MHz to 33.6dB\/100m at 2150MHz, typical for RG6 cable in long cable runs from dish to receiver.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable colour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eCCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ air spaced PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.5dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.20KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between RG6 and RG59 cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRG6 has a thicker centre conductor and dielectric than RG59, giving lower signal loss over longer runs. RG6 is the standard choice for satellite dishes and digital TV installations where cable runs exceed 15-20m. RG59 is thinner and more flexible but only suited to shorter runs below 15m.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors fit this cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 6.6mm outer diameter fits standard F-type compression connectors and screw-on F-type connectors designed for RG6 cable. Compression connectors give a more reliable weatherproof seal for outdoor satellite dish installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PVC outer sheath is suitable for outdoor use when installed in conduit or trunking to protect it from direct UV exposure and physical damage. For fully exposed runs, cable rated for direct burial or outdoor UV resistance is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is air-spaced PE dielectric?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAir-spaced polyethylene uses a foam or cellular structure that introduces air pockets into the dielectric insulation around the centre conductor. This reduces the dielectric constant compared to solid PE, which lowers signal attenuation and improves the velocity factor to 83%.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313521975563,"sku":"808.111UK","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808111UK_0.jpg?v=1784902035"},{"product_id":"mercury-eco-rg6-air-spaced-pe-coaxial-cable-cca-braid-white-100m","title":"Mercury RG6 Air Spaced White Coaxial Aerial Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco RG6 is a 75 Ohm coaxial cable built around a solid copper-clad steel (CCS) conductor with an air-spaced polyethylene dielectric, aluminium\/PET foil screen, and a copper-clad aluminium (CCA) braid under a white PVC outer sheath. The 100m reel supplies enough cable for typical residential or small commercial TV, satellite and CCTV installations where cost-effective cabling is needed without compromising signal integrity over moderate run lengths.\u003c\/p\u003e\n\u003cp\u003eDesigned for fixed indoor and outdoor installations (subject to conduit or trunking protection where exposed to UV), the air-spaced dielectric reduces capacitance to 54pF\/m and provides an 83% velocity factor, which improves signal propagation compared to solid dielectric designs. The 1mm solid CCS conductor gives better rigidity for pulling through walls and conduit than stranded alternatives, while the dual-screen construction (aluminium foil plus CCA braid) provides adequate shielding against electromagnetic interference from mains wiring, fluorescent lights and RF noise sources in domestic and light commercial environments.\u003c\/p\u003e\n\u003cp\u003eThe white PVC sheath blends with painted plaster, skirting boards and ceiling cornices in residential installations, making the cable less obtrusive when surface-mounted or run along edges. The 6.6mm overall diameter allows the cable to fit standard RG6 compression and crimp connectors (sold separately), and the CCA braid material keeps the 100m reel weight to 4.2kg, making it easier to handle on ladders and in loft spaces than solid copper-braid equivalents. Attenuation is rated at 6.9dB per 100m at 100MHz and 22.5dB per 100m at 1000MHz, which suits most domestic satellite dish and terrestrial aerial installations within typical UK home run lengths of 15-30m.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable colour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eCCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ air spaced PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.5dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.20KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between CCS conductor and solid copper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCCS (copper-clad steel) has a steel core with a thin copper coating, which makes it stiffer and cheaper than solid copper while still conducting the RF signal through the copper layer. For TV and satellite installations the performance difference is negligible over typical domestic run lengths, but solid copper cable is preferred for very long runs or commercial installations requiring lower attenuation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this cable take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 6.6mm outer diameter fits standard RG6 compression and crimp F-connectors. Compression connectors generally provide a more reliable long-term connection and are recommended for outdoor or loft installations where the cable may be subject to temperature variation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided it is installed in conduit, trunking or clipped to a wall under an overhang. The white PVC sheath is not UV-stabilised for prolonged direct sunlight exposure, so unprotected outdoor runs will degrade over time. For fully exposed outdoor runs, consider a UV-rated variant or protect the cable with conduit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much attenuation is acceptable for a satellite dish installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost UK domestic satellite installations use 15-30m of cable from the dish to the receiver. At these lengths, the attenuation of this RG6 cable (6.9dB per 100m at 100MHz) results in a total signal loss of 1-2dB, which is well within acceptable limits for Freesat and Sky reception. Runs over 50m may benefit from a low-loss cable or an inline amplifier.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522041099,"sku":"808.113UK","price":20.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808113UK_0.jpg?v=1784902048"},{"product_id":"mercury-eco-rg6-air-spaced-pe-coaxial-cable-with-cca-braid-brown-100m","title":"Mercury RG6 Air-Spaced Coaxial Aerial Cable - Brown","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco RG6 is a 75 Ohm coaxial cable built around a solid copper-clad steel (CCS) conductor, air-spaced polyethylene dielectric, aluminium\/PET foil screen and copper-clad aluminium (CCA) braid. The brown PVC outer sheath runs 100m on a reel, giving a 4.2kg total weight suitable for single-person handling during installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and light commercial CCTV camera runs, satellite dish feeds and terrestrial TV distribution where cost matters more than the lowest possible signal loss, the cable delivers usable performance across the full satellite frequency range (5-2150MHz) with attenuation figures that suit typical domestic cable runs of 10-30m. The air-spaced dielectric reduces capacitance to 54pF\/m and gives an 83% velocity factor, which keeps signal propagation delay low enough for most CCTV timing requirements.\u003c\/p\u003e\n\u003cp\u003eThe CCA braid and CCS conductor reduce material cost compared to pure copper equivalents, making this cable a practical choice for larger installations where dozens of camera positions need individual cable runs back to a central recorder. The 6.6mm outer diameter fits standard RG6 compression connectors and the brown sheath allows the cable to blend into timber fascias, brown uPVC trunking and garden structures without standing out visually.\u003c\/p\u003e\n\u003cp\u003eThe aluminium\/PET foil screen sits between the dielectric and the braid, providing additional shielding against RF interference in urban areas where Wi-Fi, mobile signals and AM\/FM broadcast can introduce noise into video feeds. The 1mm conductor diameter and 0.79mm² cross-sectional area support DC power injection for cameras up to approximately 15-20m from the DVR, though resistance is higher than pure copper equivalents so longer runs may need separate power feeds.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable colour\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eCCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ air spaced PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.5dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.20KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between CCS and pure copper conductor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCCS (copper-clad steel) has a steel core with a thin copper coating. It costs less than solid copper and provides similar RF performance, but has higher DC resistance. For CCTV camera runs carrying DC power, pure copper cable supports longer distances before voltage drop becomes a problem. For signal-only use (satellite, TV distribution) the difference is negligible at typical domestic run lengths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PVC sheath provides basic weather resistance for outdoor runs in trunking, conduit or clipped to fascias. For direct burial or long-term UV exposure, gel-filled or PE-sheathed cable designed for external use is recommended. The brown colour blends well with timber and brown uPVC outdoor installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 6.6mm outer diameter accepts standard RG6 compression F-connectors. Compression fittings provide better weatherproofing and lower return loss than twist-on or crimp connectors. Ensure the connector is rated for the specific dielectric type. Some RG6 connectors assume solid PE and may not grip correctly on air-spaced dielectric.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much signal loss should I expect on a typical camera run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 20m run at 860MHz (upper end of analogue CCTV) shows approximately 4dB loss. For HD-over-coax systems running at higher frequencies (1750-2150MHz for 4K transmission), a 20m run introduces approximately 6-7dB loss, which is acceptable for most camera-to-DVR distances in residential and small commercial sites.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522073867,"sku":"808.115UK","price":20.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808115UK_0.jpg?v=1784902062"},{"product_id":"mercury-eco-rg6-air-spaced-pe-coaxial-cable-100m-black","title":"Mercury Eco RG6 Air Spaced PE Coaxial Cable 100m - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco RG6 is a 100m reel of 75 Ohm coaxial cable built around a 1mm solid copper-clad steel (CCS) conductor, 4.6mm air-spaced polyethylene dielectric, aluminium foil screen, aluminium braid and black PVC sheath. The air-spaced dielectric reduces signal loss compared to solid foam PE at higher frequencies, making this cable suitable for satellite dish feeds, CCTV camera runs and terrestrial aerial installations where consistent impedance and low attenuation matter.\u003c\/p\u003e\n\u003cp\u003eDesigned for exterior and interior fixed installation, the RG6 cable carries 75 Ohm impedance across the full 5MHz to 2150MHz range, with return loss performance of 24dB minimum below 400MHz and 16dB minimum at 1000-2150MHz. Attenuation peaks at 33.6dB per 100m at 2150MHz, which is low enough for most domestic and light commercial satellite installations without requiring inline amplifiers. The cable's 6.6mm outer diameter fits standard F-type connectors and compression fittings.\u003c\/p\u003e\n\u003cp\u003eThe 100m reel carries metric cut markers along the sheath, allowing you to measure and cut lengths to exact requirements without waste. The 48-strand aluminium braid provides 95%+ coverage against electromagnetic interference, and the aluminium\/PET foil beneath the braid adds a secondary shield layer. The black PVC sheath is UV-stable for external runs along walls and under eaves, though direct burial requires additional conduit protection.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ air spaced PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.5dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.10KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between air-spaced and foam PE dielectric?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAir-spaced PE uses spacers to suspend the conductor within the dielectric layer, creating air gaps that reduce capacitance and signal loss at higher frequencies. Foam PE is denser and easier to terminate but shows higher attenuation above 1GHz. For satellite installations carrying signals up to 2150MHz, air-spaced PE delivers lower loss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used for Sky Q or Freesat installations?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 75 Ohm impedance and low attenuation at 950-2150MHz make this cable suitable for Sky Q, Freesat and other satellite dish feeds. Use compression F-type connectors for termination and ensure runs are kept under 30m where possible to minimise signal degradation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable suitable for outdoor runs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe black PVC sheath is UV-stable for external wall runs, clipped under eaves or mounted in open air. For direct burial or underground ducting, run the cable inside protective conduit to guard against moisture ingress and mechanical damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors fit this 6.6mm cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard F-type compression connectors designed for RG6 cable fit this 6.6mm outer diameter. Compression fittings provide better waterproofing and signal integrity than twist-on connectors, particularly for outdoor installations.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522139403,"sku":"808.117UK","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808117UK_0.jpg?v=1784902077"},{"product_id":"mercury-eco-rg6-air-spaced-pe-coaxial-cable-aluminium-braid-white-100m","title":"Mercury RG6 Air-Spaced White Coaxial Aerial Cable 100m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco RG6 is a 75 Ohm coaxial cable with an air-spaced polyethylene dielectric, a 1mm solid copper-clad steel conductor, aluminium\/PET foil screen, and a 48-strand aluminium braid. The air-spaced dielectric construction reduces signal loss across satellite, digital TV and CCTV frequencies compared to solid-core PE cables, with attenuation ranging from 2.9dB\/100m at 5MHz to 33.6dB\/100m at 2150MHz.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor and indoor satellite dish feeds, Freeview\/Freesat distribution, and CCTV camera runs where signal integrity matters over longer distances. The 6.6mm outer diameter fits standard F-connectors and compression fittings used in satellite and aerial installations. The white PVC sheath suits visible external runs on rendered or UPVC-clad buildings where black cable would stand out.\u003c\/p\u003e\n\u003cp\u003eThe solid copper-clad steel conductor gives tensile strength for overhead or vertical runs while maintaining the conductivity needed for RF signal transmission. The aluminium foil and braid provide dual-layer screening against interference, with the braid adding mechanical protection and a low-impedance earth path. The 100m reel length covers typical domestic satellite or CCTV installations without requiring mid-run joints, which can introduce signal degradation.\u003c\/p\u003e\n\u003cp\u003eEach reel weighs 4.1kg and the cable supports a velocity factor of 83%, meaning signal propagation is 83% of the speed of light in a vacuum. The capacitance of 54pF\/m and 75 Ohm impedance match standard satellite receivers, Freeview boxes, and CCTV DVRs without requiring impedance-matching transformers.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ air spaced PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.5dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.10KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the advantage of air-spaced dielectric over solid PE?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAir-spaced PE dielectric reduces signal attenuation by introducing air gaps within the insulation layer, which has a lower dielectric constant than solid polyethylene. This results in lower capacitance and better signal retention across the frequency range, particularly noticeable on longer cable runs above 20m.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this cable take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 6.6mm outer diameter accepts standard RG6 F-connectors, either screw-on or compression types. Compression F-connectors provide a more reliable weatherproof seal for outdoor satellite dish connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for outdoor installations?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The white PVC sheath is UV-resistant and rated for external use on building facades, though it should be clipped or secured to prevent wind movement damaging the cable over time. For buried runs, use conduit or ducting to protect the cable from stone damage and water ingress at termination points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between CCS and solid copper conductor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper-clad steel (CCS) has a steel core with a copper outer layer. It provides greater tensile strength for overhead or vertical runs compared to pure copper, while the copper cladding maintains the conductivity needed for RF signal transmission. Pure copper conductors offer marginally lower resistance but are less mechanically robust.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522204939,"sku":"808.119UK","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808119UK_0.jpg?v=1784902091"},{"product_id":"mercury-eco-rg6-foamed-pe-coaxial-cable-aluminium-braid-black-100m","title":"Mercury RG6 Foamed Coaxial Aerial Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco RG6 is a 75 Ohm coaxial cable built around a 1mm solid copper-clad steel (CCS) conductor, surrounded by a 4.6mm foam polyethylene dielectric, aluminium\/PET foil screen, and 48-strand aluminium braid under a black PVC outer sheath. The cable measures 6.6mm in diameter and is supplied on a 100m reel with cut markers for convenient sectioning during installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for satellite dish downlinks, digital TV aerial distribution, and CCTV camera runs, the RG6 handles frequencies from 5MHz to 2150MHz with attenuation performance that sits between RG59 and quad-shield RG6. The foam dielectric reduces signal loss compared to solid polyethylene cores, while the aluminium braid and foil screen provide shielding against electromagnetic interference from mains cables and wireless signals.\u003c\/p\u003e\n\u003cp\u003eThe solid CCS conductor provides mechanical rigidity for permanent installation runs where the cable is clipped along walls, run through conduit or buried in shallow trunking. The 100m reel length supports full-house installations, multi-camera CCTV systems and commercial satellite distribution without mid-run joints that can degrade signal quality. The cable weighs 3.8kg per 100m reel, making it lighter than quad-shield equivalents while still meeting typical domestic and light commercial installation requirements.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.80KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between RG6 and RG59 coaxial cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRG6 has a thicker 1mm conductor and larger dielectric compared to RG59's 0.81mm conductor, resulting in lower signal loss over longer runs. RG6 is the standard for satellite dish installations and digital TV distribution where cable runs exceed 15-20m, while RG59 is typically used for shorter CCTV camera runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe black PVC sheath provides basic UV resistance for sheltered outdoor runs such as under eaves or through conduit. For direct burial or extended UV exposure, a double-sheathed or gel-filled variant would be preferable. The cable is not rated for wet or underground installation without additional protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does RG6 cable use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRG6 uses F-type connectors for satellite and terrestrial TV installations, and BNC connectors for CCTV and professional video applications. Crimp-on or compression F-connectors provide the most reliable connection. Push-on connectors are acceptable for temporary installations but prone to loosening over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much signal loss should I expect on a 50m run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt typical satellite frequencies around 1000MHz, this cable shows 22.2dB maximum attenuation per 100m, so a 50m run would see approximately 11dB loss. Most satellite LNBs output 90-100dB signal strength, leaving sufficient margin for a receiver to lock onto channels even after a 50m cable run.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522270475,"sku":"808.121UK","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808121UK_rb0.jpg?v=1785078000"},{"product_id":"mercury-eco-rg6-foamed-pe-coaxial-cable-with-aluminium-braid-brown-100m","title":"Mercury RG6 Foamed PE Coaxial Aerial Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco RG6 is a 75-ohm coaxial cable with a solid copper-clad steel (CCS) conductor, foam polyethylene dielectric, aluminium\/PET foil screen, and aluminium braid, finished in a brown PVC outer sheath. Supplied on a 100m reel with metric markers printed along the cable run, allowing installers to measure and cut to exact lengths without external measuring tools.\u003c\/p\u003e\n\u003cp\u003eDesigned for digital TV aerial systems, satellite dish feeds, and CCTV camera runs, the brown sheath provides a discreet alternative to white or black cable where it runs along skirting boards, across timber cladding, or through garden settings. The 6.6mm overall diameter fits standard coaxial cable clips and external ducting. The 75-ohm impedance matches standard F-connectors, satellite receivers, TV aerials, and DVRs without requiring impedance matching transformers.\u003c\/p\u003e\n\u003cp\u003eThe foam PE dielectric reduces signal loss compared to solid polyethylene cores, keeping attenuation to 22.2dB per 100m at 1000MHz and 33.3dB per 100m at 2150MHz, which allows satellite signals in the 950-2150MHz band to reach receivers with adequate strength over typical domestic runs of 20-40m. The aluminium braid and foil screen provide 24dB minimum return loss between 5-400MHz, suppressing interference from mains wiring and external RF sources. The solid CCS conductor gives better rigidity than stranded copper for fixed installations where the cable is clipped in place and not subject to repeated flexing.\u003c\/p\u003e\n\u003cp\u003eThe 100m reel weighs 3.8kg and the cable has an 83% velocity factor, which affects the physical wavelength of signals travelling through the foam dielectric compared to air. This specification is relevant when calculating stub lengths for phase-matching in distribution amplifier systems or when designing custom-length stubs for filtering applications.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.80KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors fit this cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard RG6 F-connectors, compression or crimp types, fit the 6.6mm outer diameter. The solid CCS conductor accepts push-through compression connectors designed for RG6 cable with 1mm centre pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brown PVC sheath is suitable for outdoor use in typical UK climates when clipped to walls or run through conduit. For burial or exposed UV environments, additional UV-rated ducting or conduit is recommended to extend cable life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum run length for satellite signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 2150MHz (the upper satellite band), attenuation is 33.3dB per 100m. For a typical satellite LNB output of around 90dBµV and a receiver input sensitivity of 50dBµV, a maximum run of approximately 120m is possible before signal drops below usable levels. Practical installations rarely exceed 50m.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy brown instead of white or black?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brown sheath blends against timber cladding, brick, terracotta render, and garden fencing where white or black cable would stand out. It's commonly chosen for external satellite dish feeds on period properties or timber-framed buildings.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522303243,"sku":"808.123UK","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808123UK_rb0.jpg?v=1785078011"},{"product_id":"mercury-eco-rg6-foamed-pe-coaxial-cable-aluminium-braid-white-100m","title":"Mercury RG6 Foamed White Coaxial Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco RG6 is a 75 Ohm coaxial cable built with a solid copper-clad steel (CCS) conductor, foam polyethylene dielectric, aluminium\/PET foil screen, and an aluminium braid beneath a white PVC outer sheath. The 1mm conductor diameter and 6.6mm overall cable diameter sit within the RG6 specification, making this cable compatible with standard RG6 F-connectors and satellite\/TV distribution equipment.\u003c\/p\u003e\n\u003cp\u003eDesigned for digital TV aerial distribution, satellite dish downleads, and CCTV camera runs where a professional-grade coaxial is required but pure copper conductor is not specified, the Mercury Eco offers low attenuation across the 5MHz to 2150MHz frequency range used by terrestrial TV, satellite LNBs and DVB-T2 signals. The 100m reel length suits house rewires, multi-room installations and commercial distribution systems where cable is run from a central splitter to wall plates across multiple rooms.\u003c\/p\u003e\n\u003cp\u003eThe foam PE dielectric reduces signal loss compared to solid polyethylene, while the dual-layer screening (aluminium foil plus aluminium braid) provides rejection of external interference from mains wiring, radio transmitters and mobile signals. The white sheath blends into ceilings and skirting in residential installs, and the reel carries metric cut markers every metre to simplify measuring and costing on-site. At 3.8kg per 100m reel, the cable is light enough for loft runs without needing additional support brackets every few metres.\u003c\/p\u003e\n\u003cp\u003eThe solid CCS conductor maintains signal integrity over longer runs than stranded copper-clad aluminium alternatives, though it is less flexible and requires care when routing tight bends. Installers should observe a minimum bend radius of approximately 50mm to avoid kinking the foam dielectric, which would degrade impedance and increase return loss. The cable is rated for indoor use and protected outdoor runs (within conduit or trunking); it does not carry a UV-stabilised sheath for direct burial or prolonged sun exposure.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e48 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.80KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between CCS and pure copper conductor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper-clad steel (CCS) has a steel core with a copper outer layer, giving mechanical strength and reasonable conductivity at lower cost than solid copper. It performs well for RF signals in the MHz-GHz range used by TV and satellite, but is less flexible and harder to strip than pure copper. For typical domestic TV and satellite installations under 50m, CCS provides sufficient signal integrity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used for outdoor aerial or satellite dish runs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided the cable is protected from direct UV exposure and water ingress. Run the cable inside conduit, trunking or clipped under eaves where it is shaded. The white PVC sheath is not UV-stabilised, so prolonged sun exposure will degrade the jacket over time. Do not bury the cable directly in soil.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does RG6 cable use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard F-connectors designed for RG6 cable. The 6.6mm outer diameter and 1mm conductor diameter match the dimensions required for compression or crimp F-connectors available from most AV and satellite suppliers. Strip the cable to expose 10mm of conductor, ensuring the braid does not short to the centre pin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much signal loss should I expect over a 20m run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 860MHz (typical for Freeview HD signals), the maximum attenuation is 20.1dB per 100m, so a 20m run would lose approximately 4dB. At 2150MHz (satellite LNB frequency), the loss increases to around 6.7dB over 20m. These values assume the cable is not kinked and all connectors are properly fitted.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522336011,"sku":"808.125UK","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808125UK_rb0.jpg?v=1785078023"},{"product_id":"mercury-eco-twin-rg6-coaxial-cable-aluminium-braid-black-100m-reel","title":"Mercury RG6 Twin Aluminium Coaxial Aerial Cable Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco is a twin RG6 coaxial cable supplied on a 100m reel, each core built around a 1mm solid copper-clad steel conductor wrapped in a 4.6mm foam polyethylene dielectric, an aluminium\/PET foil screen and a 64-strand aluminium braid. The two cores run parallel inside a black PVC outer jacket, providing two independent 75-ohm signal paths in a single cable run.\u003c\/p\u003e\n\u003cp\u003eDesigned for dual or quad LNB satellite dish installations and twin-camera CCTV runs where two coaxial feeds need to follow the same route, the twin construction halves the number of cable pulls needed compared to running two separate RG6 cables. The solid CCS conductor maintains signal integrity across frequencies from 5MHz to 2150MHz, with attenuation at 1GHz of 22.2dB max per 100m and a velocity factor of 83%. The aluminium braid provides shielding against RF interference.\u003c\/p\u003e\n\u003cp\u003eThe 100m reel includes cut markers at regular intervals, allowing installers to measure and cut lengths without additional tools. The foam PE dielectric reduces capacitance to 54pF\/m and improves signal speed compared to solid dielectric alternatives. The cable weighs 7.7kg on the reel and handles the typical UK satellite frequency range of 950-2150MHz used by Sky and Freesat dishes, as well as lower-frequency CCTV video signals.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e7.70KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e2 x 0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e2 x 1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e2 x 64\/0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e2 x 6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between twin RG6 and two separate RG6 cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwin RG6 runs two independent coaxial cores side by side in a single jacket. This halves the number of cable pulls needed for dual LNB satellite installations or twin CCTV camera runs, and keeps both cables aligned along the same route. Electrically, each core performs the same as a separate RG6 cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PVC outer jacket provides basic weather resistance, but for permanent outdoor runs exposed to UV the cable should be clipped to walls or run inside conduit rather than left loose. The black jacket has better UV stability than white or grey alternatives.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach core accepts standard RG6 F-type compression or crimp connectors. You will need twice as many connectors as a single-core installation. A typical dual LNB to dual-tuner setup requires four F-connectors total, one for each end of each core.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the conductor solid copper or copper-clad steel?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper-clad steel (CCS). The 1mm steel core is coated with a layer of copper. CCS provides mechanical strength for outdoor runs and long pulls while keeping weight and cost lower than solid copper. Signal performance at satellite frequencies is comparable to solid copper for runs under 100m.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522368779,"sku":"808.127UK","price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808127UK_rb0.jpg?v=1785078035"},{"product_id":"mercury-eco-twin-rg6-coaxial-cable-75-ohm-black-250m-reel","title":"Mercury Eco Twin RG6 Coaxial Cable 75 Ohm - Black 250m Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Eco is a twin RG6 coaxial cable carrying two parallel 75-ohm signal paths in a single black PVC sheath. Each conductor is built around a 1mm solid copper-clad steel core, surrounded by a 4.6mm foamed polyethylene dielectric, an aluminium\/PET foil screen, and a 64-strand aluminium braid. The twin construction allows two independent signal runs to be installed in a single cable pull, reducing labour and visible cable runs on exterior walls.\u003c\/p\u003e\n\u003cp\u003eDesigned for satellite dish installations using dual or quad LNBs, the cable supports frequencies from 5MHz to 2150MHz with attenuation performance meeting RG6 standards across the full satellite IF band. The foamed PE dielectric gives the cable an 83% velocity factor and 54pF\/m capacitance, making it suitable for long cable runs without requiring in-line amplification. The 250m reel includes metric cut markers, allowing installers to measure and cut cable lengths on site without separate measuring equipment.\u003c\/p\u003e\n\u003cp\u003eThe twin configuration suits installations where two satellite feeds need to run to a single receiver location, or where a CCTV system requires both video and power over separate coaxial paths. Each 6.6mm cable sits side-by-side within the outer sheath, and the entire assembly weighs 19.3kg on the reel. The black PVC sheath resists UV degradation on exposed exterior runs and pairs cleanly with black satellite dish hardware and wall-mounted junction boxes.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e19.30KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e250m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e2 x 0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e2 x 1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid CCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e2 x 64\/0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAluminium \/ PET foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e2 x 6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e20dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e16dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e2.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e5.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e10.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e20.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e22.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e33.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat installations is twin RG6 coaxial cable used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwin RG6 cable is most commonly used for satellite dish installations with dual or quad LNBs, where two separate signal feeds need to run to a receiver location. It's also suitable for CCTV systems requiring two independent coaxial runs, or for installations where routing two separate cables would be impractical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum cable run length without signal loss?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSignal attenuation depends on frequency. At 1000MHz the cable loses 22.2dB per 100m, and at 2150MHz it loses 33.3dB per 100m. Most satellite receivers require a minimum signal level of around -65dBm, so maximum run length depends on the input signal strength from the LNB and the receiver's sensitivity threshold.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the two cables be separated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe two RG6 cables sit side-by-side within a single outer sheath and cannot be physically separated without cutting the sheath. If independent routing is needed at any point in the installation, use two separate single RG6 cables instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors are needed for termination?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard F-type compression or crimp connectors designed for 6.6mm RG6 cable are used to terminate each conductor. Two connectors are needed per cable end. Four connectors total for a point-to-point run.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522696459,"sku":"808.129UK","price":90.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808129UK_rb0.jpg?v=1785078047"},{"product_id":"mercury-100u-foamed-pe-coaxial-cable-with-copper-braid-black-100m","title":"Mercury Foamed PE Copper Braid Coaxial Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury 100U is a 75-ohm coaxial cable built around a 1mm solid oxygen-free copper conductor, surrounded by a 4.6mm foamed polyethylene dielectric. A copper foil screen wraps the dielectric, covered by a 64-strand oxygen-free copper braid, all encased in a 6.6mm black PVC outer sheath. The dual-layer screening reduces RF interference penetration, making the cable suitable for satellite, digital terrestrial and cable TV signal transmission.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial AV installations, the 100U handles frequencies from 5MHz to 2150MHz with defined attenuation characteristics across the range. The foamed polyethylene dielectric provides an 83% velocity factor and 54pF\/m capacitance, keeping signal loss lower than solid dielectric alternatives over long cable runs. The 100m reel carries metric cut markers printed on the sheath, allowing installers to measure and cut lengths without external measuring tools.\u003c\/p\u003e\n\u003cp\u003eThe solid OFC conductor provides a consistent 0.79mm² cross-sectional area, eliminating the strand-to-strand contact resistance found in multi-strand conductors at RF frequencies. The copper foil screen acts as a primary barrier against external electromagnetic interference, while the OFC braid provides mechanical strength and a low-resistance path to ground. Return loss performance holds above 30dB minimum per 100m from 5-400MHz, degrading to 18dB minimum from 1000-2150MHz as frequency rises.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat installations is this cable suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Mercury 100U handles satellite dish feeds, digital terrestrial TV antenna distribution, and cable TV installations. The 75-ohm impedance matches standard F-type connectors and the frequency response covers both legacy analogue signals and modern digital\/HD transmission standards up to 2150MHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between foamed PE and solid dielectric?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFoamed polyethylene injects air into the dielectric material, reducing capacitance and signal loss compared to solid dielectric cables. The 83% velocity factor on this cable means signals travel faster and with lower attenuation than equivalent solid-core designs, particularly beneficial on runs over 20-30m.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PVC outer sheath provides basic weather resistance for sheltered outdoor runs, but this cable is not UV-stabilised or designed for direct burial. For long-term outdoor exposure or underground installation, use a cable specifically rated for external\/burial use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 6.6mm outer diameter suits standard compression or crimp F-type connectors designed for 100U\/RG6-equivalent cable. The solid OFC conductor and foamed dielectric require connectors with the correct pin depth and compression barrel diameter to maintain 75-ohm impedance at the termination point.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522794763,"sku":"808.147UK","price":53.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808147UK_LD1_344ee7a2-a088-4f5b-8bcc-cc7df6e10964.jpg?v=1715194932"},{"product_id":"mercury-100u-foamed-pe-coaxial-cable-with-cca-braid-white-100m","title":"Mercury Foamed PE Coaxial Aerial Cable, White (100m)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury 100U is a 75-ohm coaxial cable built with a 1mm solid oxygen-free copper (OFC) conductor, 4.6mm foam polyethylene dielectric, copper foil screen and copper-clad aluminium (CCA) braid. The cable measures 6.6mm in overall diameter and is supplied on a 100m reel with a white PVC outer sheath. The construction is designed for digital TV, satellite and cable TV signal transmission where low attenuation and stable impedance are required.\u003c\/p\u003e\n\u003cp\u003eInstalled in domestic and commercial AV systems, the cable suits runs from satellite dishes to receivers, aerials to distribution amplifiers, and cable TV entry points to set-top boxes. The foam PE dielectric reduces signal loss compared to solid polyethylene cores, while the copper foil screen provides continuous shielding against interference. The CCA braid adds mechanical strength and a secondary screen layer without the weight and cost of a pure copper braid.\u003c\/p\u003e\n\u003cp\u003eThe 100m reel length allows installers to run continuous cable spans without mid-run joins, reducing potential points of signal degradation. The white sheath blends with wall surfaces and skirting boards in residential settings. Signal attenuation is rated at 6.6dB per 100m at 100MHz, rising to 32.7dB per 100m at 2150MHz, making the cable suitable for standard satellite frequency ranges up to 2.15GHz. The 75-ohm impedance matches standard F-type connectors and satellite receiver inputs.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid OFC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e64 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eCCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eCopper foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e28dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e18dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e1.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e4.7dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e9.7dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e19.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e21.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e32.7dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat applications is this cable suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Mercury 100U is designed for digital TV, satellite and cable TV signal transmission. Typical installations include runs from satellite dishes to receivers, aerial connections to distribution amplifiers, and cable TV entry points to set-top boxes in domestic and commercial AV systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does CCA braid mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCCA stands for copper-clad aluminium. The braid uses aluminium wire with a thin copper coating, providing adequate screening and mechanical strength at lower weight and cost than a pure copper braid. The solid OFC conductor remains pure copper for optimal signal transmission.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does foam PE dielectric improve performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFoam polyethylene has lower dielectric loss than solid polyethylene, reducing signal attenuation and improving the velocity factor to 83%. This means signals travel faster through the cable with less degradation over long runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors are compatible?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable's 6.6mm diameter and 75-ohm impedance match standard F-type connectors used in satellite and cable TV installations. Both compression and crimp F-connectors designed for 6-7mm coaxial cable will fit this construction.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522827531,"sku":"808.151UK","price":53.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808151UK_0.jpg?v=1784902178"},{"product_id":"mercury-100u-foamed-pe-coaxial-cable-cca-braid-black-100m","title":"Mercury 100U Foamed PE Coaxial Cable CCA Braid Black - 100m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury 100U is a 75 Ohm RG59 coaxial cable built around a 1mm solid oxygen-free copper (OFC) conductor, a 4.6mm foamed polyethylene dielectric, a copper foil screen and a copper-clad aluminium (CCA) braid. The cable measures 6.6mm in outer diameter and is supplied on a 100m reel with cut markers printed on the jacket at regular intervals to assist with measuring runs during installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for satellite dish installations where dual or quad LNBs require twin cable runs from the dish to the receiver, and for CCTV systems where coaxial connections are preferred over IP or wireless links. The 75 Ohm impedance matches standard satellite receiver inputs, F-connectors and BNC connectors used in analogue and HD-CVI CCTV cameras. The foamed PE dielectric reduces signal attenuation compared to solid polyethylene, with attenuation measured at 6.6dB per 100m at 100MHz and 21.6dB per 100m at 1000MHz.\u003c\/p\u003e\n\u003cp\u003eThe CCA braid (64 strands of 0.12mm copper-clad aluminium) provides the outer shield layer, sitting over a copper foil screen that wraps the dielectric. This dual-layer screening reduces electromagnetic interference from nearby power cables and RF sources. The black PVC jacket is rated for indoor and sheltered outdoor use where the cable is not exposed to direct UV or standing water. The 100m reel length suits typical domestic satellite dish runs of 20-40m with enough spare cable for routing through loft spaces and down walls.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid OFC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e64 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eCCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eCopper foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6.6mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e28dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e24dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e18dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @  5MHz\u003c\/td\u003e\n\u003ctd\u003e1.8dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e4.7dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e6.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e9.7dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e14.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e19.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e21.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e29.1dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e32.7dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between OFC conductor and CCA braid?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe centre conductor is solid oxygen-free copper (OFC), which carries the signal with minimal resistance. The outer braid is copper-clad aluminium (CCA), which provides shielding at lower cost and weight than a full copper braid while still meeting the performance requirements for satellite and CCTV installations at the distances typical in domestic settings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe black PVC jacket is suitable for sheltered outdoor use where the cable is clipped to walls under eaves or run through conduit. It is not rated for burial or direct exposure to UV and standing water. For unsheltered outdoor runs, consider a cable with a UV-resistant jacket or install this cable inside conduit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this cable take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 6.6mm outer diameter suits standard compression F-connectors for satellite installations and crimp or compression BNC connectors for CCTV. The 1mm solid conductor and 4.6mm dielectric are standard RG59 dimensions, so most RG59-rated connectors will fit without modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much signal loss occurs over a typical satellite dish run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 30m run from dish to receiver at satellite frequencies (950-2150MHz) will see approximately 6-10dB attenuation depending on the exact frequency. This is well within acceptable limits for domestic satellite reception, where LNB output is typically 90-100dBμV and receiver sensitivity is around 50-60dBμV.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522860299,"sku":"808.153UK","price":48.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808153UK_0.jpg?v=1784902192"},{"product_id":"mercury-twin-sat-cctv-rg59-coaxial-cable-75-ohm-copper-braid-black-100m","title":"Mercury Twin RG59 Coaxial Aerial Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury twin RG59 coaxial cable runs two independent 75-ohm signal paths in a single outer jacket, each core built around a 0.65mm solid oxygen-free copper conductor, foam-filled polyethylene dielectric, copper foil screen and oxygen-free copper braid. The twin configuration supplies dual or quad LNB satellite installations where two signal runs are needed to a single receiver location, or runs two separate CCTV camera feeds back to a DVR without the need for parallel cable runs.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor and indoor runs between satellite dishes and set-top boxes, or between CCTV cameras and recording equipment, the cable maintains 75-ohm impedance across the full frequency range from 5MHz to 2150MHz. The dual shielding (foil screen plus copper braid) reduces interference pickup from nearby mains cables, RF sources and wireless signals. Supplied on a 100m reel with metric cut markers printed along the sheath, allowing accurate measurement during installation without needing a separate tape measure.\u003c\/p\u003e\n\u003cp\u003eThe foam polyethylene dielectric gives lower signal loss than solid PE alternatives, with attenuation figures of 8.9dB per 100m at 100MHz rising to 42.2dB per 100m at 2150MHz. The black PVC outer sheath has a 5mm diameter per core (approximately 10mm overall width where the two cores sit side by side), giving flexibility for wall clips and conduit routing without being bulky. The 5.7kg reel weight includes the cable only and sits comfortably on typical cable drum stands during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e2 x 0.33mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e2 x 0.65mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eSolid OFC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e2 x 48\/0.14mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eOFC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eCopper foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e3mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e2 x 5mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e67pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity factor\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 5-400MHz\u003c\/td\u003e\n\u003ctd\u003e30dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 450-1000MHz\u003c\/td\u003e\n\u003ctd\u003e22dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturn loss 1000-2150MHz\u003c\/td\u003e\n\u003ctd\u003e18dB min.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 50MHz\u003c\/td\u003e\n\u003ctd\u003e6.5dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 100MHz\u003c\/td\u003e\n\u003ctd\u003e8.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 200MHz\u003c\/td\u003e\n\u003ctd\u003e12.3dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 400MHz\u003c\/td\u003e\n\u003ctd\u003e17.6dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 860MHz\u003c\/td\u003e\n\u003ctd\u003e24.7dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1000MHz\u003c\/td\u003e\n\u003ctd\u003e26.9dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 1750MHz\u003c\/td\u003e\n\u003ctd\u003e35.7dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttenuation @ 2150MHz\u003c\/td\u003e\n\u003ctd\u003e42.2dB max.\/100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5.70KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between twin coaxial and two separate cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwin coaxial runs two independent signal cores in a single outer jacket, halving the number of cable runs needed during installation and reducing wall clip and conduit usage. Each core is fully shielded independently, so there's no crosstalk between the two signals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for both satellite and CCTV on the same run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. One core can carry a satellite signal while the other carries a CCTV camera feed, as long as the terminations and equipment at each end are appropriate to the signal type. The 75-ohm impedance suits both applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this cable use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRG59 coaxial cable uses standard F-type connectors for satellite installations or BNC connectors for CCTV. Connectors are sold separately and are crimped or compression-fitted onto the stripped cable ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe black PVC sheath provides basic weather protection for outdoor runs, but the cable benefits from being run inside conduit or trunking where exposed to direct UV or standing water. The copper braid and foil screen are not rated for direct burial without additional protection.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313522893067,"sku":"808.163UK","price":74.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/808163UK_0.jpg?v=1784902207"}],"url":"https:\/\/niori.co.uk\/collections\/tv-aerials-brackets.oembed","provider":"Niori","version":"1.0","type":"link"}