{"title":"Tracks","description":"","products":[{"product_id":"single-circuit-track-10a-black-1m-knightsbridge","title":"Single Circuit Track 10A Black 1m - Knightsbridge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge single circuit track is a 1m length of black aluminium track rated for 10A at 230V, designed to accept compatible track-mounted spotlights and directional fittings. The track provides a continuous copper conductor running the full 1000mm length, allowing multiple lights to be positioned anywhere along the rail and repositioned as needed without re-wiring.\u003c\/p\u003e\n\u003cp\u003eDesigned for ceiling or wall mounting in domestic and commercial settings, the track suits kitchens, retail displays, galleries, and accent lighting installations where flexibility in light positioning is required. The 35mm width and 17mm projection give a compact profile that sits close to the mounting surface. The track is supplied with both live and dead end caps, so it can be installed as a standalone run or connected to additional track lengths in larger installations.\u003c\/p\u003e\n\u003cp\u003eThe black aluminium finish provides a neutral backdrop that recedes visually when spotlights are mounted, making the track less visible than polished metal alternatives in most room contexts. The IP20 rating suits dry indoor environments. The track accepts Knightsbridge and compatible third-party track heads with matching single-circuit connection mechanisms.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e35 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4120364_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_798844.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow many spotlights can this track support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 10A rating at 230V provides a maximum load capacity of 2,300W across all lights mounted to the track. In practice, most LED track spotlights draw 5-10W each, so you can typically fit 10-15 spotlights on a single 1m run before reaching the electrical limit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple tracks be joined together?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Knightsbridge produces connector accessories that allow multiple 1m tracks to be joined end-to-end, creating continuous runs of 2m, 3m or longer. The track is supplied with both live and dead end caps to accommodate single or multi-track installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat track heads are compatible?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe track accepts Knightsbridge single-circuit track heads and compatible third-party fittings with matching connection mechanisms. Check the track head product specifications to confirm single-circuit compatibility before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the track mounted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe track can be ceiling-mounted or wall-mounted using screws through the pre-drilled fixing points along the length. Mounting hardware is typically provided with the track or available separately depending on the surface type.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293590216971,"sku":"TRK1MABK","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/849738_c4f7c188-245d-4ff9-9001-b37f0d437e6a.jpg?v=1714660871"},{"product_id":"10a-single-circuit-track-3m-satin-nickel-knightsbridge","title":"10A Single Circuit Track 3m Satin Nickel - Knightsbridge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10A single circuit track is a 3m length of satin nickel-finished track designed to mount spotlights, pendant adapters and directional fittings along a continuous 230V power rail. The track houses a copper conductor rated at 10A continuous load, allowing multiple track-mounted fittings to be powered from a single ceiling connection point without running separate cables to each light position.\u003c\/p\u003e\n\u003cp\u003eDesigned for retail, hospitality and residential installations where lighting positions need to be adjustable or where running multiple ceiling feeds is impractical, the track mounts directly to ceiling joists or suitable backing boards. The 35mm width and 17mm projection sit close to the ceiling plane, making the track suitable for standard height rooms. Track-compatible spotlights and pendants slide into the channel and lock with a quarter-turn mechanism, allowing fittings to be repositioned along the 3m length without re-wiring.\u003c\/p\u003e\n\u003cp\u003eThe track is supplied with both live and dead end caps. The live end cap houses the mains connection where the ceiling cable feeds into the track, while the dead end cap seals the opposite terminus. The aluminium body with satin nickel finish provides a neutral metallic appearance that works across contemporary, industrial and transitional interiors. The IP20 rating limits the track to dry indoor locations — kitchens, living rooms, retail spaces and offices where moisture is not a factor.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e35 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eSatin Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4120372_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_798862.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fittings are compatible with this track?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe track accepts any Knightsbridge track-mounted spotlight, pendant adapter or directional fitting designed for single circuit track systems. Fittings insert into the channel and lock with a quarter-turn mechanism. Check that the combined load of all fittings on the track does not exceed the 10A rating (approximately 2,300W at 230V).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the track powered?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe live end cap houses the mains connection point where a ceiling cable feeds into the track. The track must be wired by a qualified electrician in accordance with BS 7671 wiring regulations. The dead end cap seals the opposite end of the track.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the track be cut to a shorter length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The aluminium track can be cut with a hacksaw to fit shorter ceiling runs. Cut ends must be deburred and sealed with the appropriate end caps. Ensure the copper conductor remains intact and properly insulated after cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple 3m sections be joined?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge offers track joiners and connectors that allow multiple sections to be linked into longer continuous runs. The total load across all joined sections must not exceed the 10A rating of the conductor.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293590282507,"sku":"TRK3MAS","price":36.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/849914_df1f51a7-2bb3-412a-8a42-7f4b63d34984.jpg?v=1714660873"},{"product_id":"single-circuit-track-10a-satin-nickel-1m","title":"Single Circuit Track 10A Satin Nickel 1m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge single circuit track is a 1m aluminium and copper track system rated at 10A on 230V mains, finished in satin nickel. The track accepts single-circuit track spotlights and pendants, allowing multiple light heads to be positioned along the 1000mm length and moved as needed without re-wiring. The system includes both live and dead end accessories, allowing the track to be powered from either end or closed off cleanly where no connection is required.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential kitchens, retail displays and commercial accent lighting where adjustable spot positioning matters, the track mounts directly to ceilings or walls and provides a low-profile 17mm projection from the mounting surface. The 35mm width keeps the track visually compact while housing the internal copper conductor that carries current to each attached light fitting. Each track supports a combined load up to 10A (2300W), accommodating multiple LED or halogen track heads on a single circuit.\u003c\/p\u003e\n\u003cp\u003eThe satin nickel finish provides a brushed metallic surface that softens reflections and pairs comfortably with stainless steel appliances, chrome fixtures and contemporary interiors. The aluminium construction keeps the track lightweight for ceiling mounting while the internal copper conductor ensures reliable current flow across the full 1m length. Tracks can be linked end-to-end using connector accessories (sold separately) to create longer runs where more than 1m of adjustable lighting is needed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e35 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eSatin Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4120366_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_798848.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat track heads are compatible?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe track accepts any single-circuit track spotlight or pendant designed for the universal track system standard. Knightsbridge produces a range of compatible track heads in matching satin nickel and other finishes, available separately at Niori.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple tracks be joined together?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Tracks can be linked end-to-end using straight or flexible connector accessories (sold separately) to create longer continuous runs. Each connector maintains the 10A current rating across the joined sections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the track powered?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe track is supplied with both live end and dead end accessories. The live end connects to the mains supply and feeds current into the track, while the dead end caps off the opposite end. The track can be powered from either end depending on where the ceiling circuit connection is located.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum load?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe track is rated at 10A on 230V, supporting a combined load up to 2300W across all attached light fittings. Most LED track heads draw 5-15W each, allowing 15-20 heads per 1m track within the rating.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294000079115,"sku":"TRK1MAS","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/849746_b1de0670-6669-4df5-a3cd-b9bc98a13304.jpg?v=1714667200"},{"product_id":"10a-single-circuit-track-white-1m-knightsbridge","title":"10A Single Circuit Track White 1m - Knightsbridge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10A single circuit track is a 1m aluminium and copper rail finished in white, designed to power and mount adjustable track spotlight heads. The track runs on 230V mains at 10A capacity, supporting a combined load of up to 2,300W across all fitted heads. It ships with both live and dead end accessories, allowing the track to be installed as a standalone 1m run or extended by joining multiple sections.\u003c\/p\u003e\n\u003cp\u003eSuited to retail spaces, kitchen task lighting, gallery walls and home offices where directional accent or task light is needed, the track mounts to ceilings or walls using the integrated fixing channels on the rear. The 35mm width and 17mm projection keep the profile compact once installed. Compatible track heads (sold separately) clip into the internal copper rail and can be repositioned along the length without tools, making it simple to adjust lighting as room layouts change.\u003c\/p\u003e\n\u003cp\u003eThe white powder-coated aluminium finish pairs with white or light-toned ceilings to minimise visual contrast, and the IP20 rating confines use to dry indoor environments. The Class I earthing requirement means the track must be connected to a protective earth conductor during installation. Track sections can be cut to length on site if a run shorter than 1m is needed, though this should be done by a qualified electrician to maintain safety and warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e35 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4120365_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_798852.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat track heads are compatible with this track?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a single circuit track using Knightsbridge's standard rail profile. Compatible track heads include Knightsbridge's own range of adjustable spotlights rated for single circuit track use. Check the product page of any track head to confirm compatibility before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple 1m sections be joined together?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Track sections can be joined end-to-end using straight connectors (sold separately) to create longer continuous runs. The combined load across all sections must not exceed 10A (2,300W) on a single circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included with the track?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 1m track section ships with a live end accessory (for powered connection to mains) and a dead end cap (to seal the unpowered end). Track heads, connectors for joining sections, and mounting hardware are sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the track be cut to a shorter length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the aluminium track can be cut to length on site using a fine-tooth saw. This should only be done by a qualified electrician, and any cut edges must be deburred to avoid damage to the internal copper rail or risk of short circuit.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294000111883,"sku":"TRK1MAW","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/849752_b5756dbc-366d-4323-ad76-a123248f85f9.jpg?v=1714667203"},{"product_id":"10a-single-circuit-track-black-2m-knightsbridge","title":"10A Single Circuit Track Black 2m - Knightsbridge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10A single circuit track is a 2m black aluminium and copper rail designed to power track-mounted spotlights and directional fittings. The track runs on 230V mains with a 10A circuit capacity, supporting up to 2,300W of combined load across all fittings mounted to the rail. It ships with both live and dead end accessories to allow installation as a single run or as part of a larger multi-track layout.\u003c\/p\u003e\n\u003cp\u003eUsed in kitchens, retail spaces, galleries and offices where directional accent or task lighting is needed without fixing individual ceiling roses for each spotlight, the track mounts directly to ceilings or suspended grids. The 35mm width and 17mm projection give a low-profile footprint that suits both high and standard-height ceilings. Track spotlights (sold separately) clip onto the rail at any position along the 2m length and can be repositioned without re-wiring.\u003c\/p\u003e\n\u003cp\u003eThe black powder-coated aluminium body hides the copper conductor inside, giving a clean finish that works with contemporary, industrial and minimalist interiors. The IP20 rating limits the track to dry indoor use only. The track can be cut to shorter lengths on site if the full 2m run is not needed, or joined to additional 2m sections using connector accessories (sold separately) to create longer continuous runs.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e35 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4120367_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_798854.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum load the track can handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe track is rated at 10A on 230V mains, which supports up to 2,300W of combined load across all fittings mounted to the rail. Individual spotlights typically draw 5-15W each, so a 2m track comfortably powers 10-20 LED spots depending on wattage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the track be cut to a shorter length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The aluminium body can be cut to shorter lengths on site using a hacksaw or metal-cutting tool. After cutting, the live or dead end accessory is fitted to the cut end to seal the conductor and allow safe installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat spotlights are compatible?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe track uses the standard single circuit track format, compatible with most track-mounted spotlights designed for UK 230V single circuit systems. Check that the spotlight specifies single circuit compatibility before purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple tracks be joined together?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Knightsbridge produces connector accessories (sold separately) that join two track sections end-to-end, allowing longer continuous runs. The dead end accessory supplied with this track is removed and replaced with the connector piece where tracks meet.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294000374027,"sku":"TRK2MABK","price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/849784_9d4f73ca-1ded-47ea-b84b-345f229edf17.jpg?v=1714667205"},{"product_id":"single-circuit-track-10a-satin-nickel-2m","title":"Single Circuit Track 10A Satin Nickel 2m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge single circuit track is a 2m aluminium and copper rail finished in satin nickel, rated at 10A on 230V 50Hz mains. The track accepts Knightsbridge-compatible single circuit track heads and provides a single live conductor running the full 2000mm length, allowing multiple spotlights or pendant adaptors to be positioned and repositioned along the rail without rewiring.\u003c\/p\u003e\n\u003cp\u003eDesigned for ceiling or wall mounting in residential, retail and hospitality spaces, the track suits kitchens, open-plan living areas, shop displays, galleries and offices where adjustable accent or task lighting is needed. The 35mm width and 17mm projection from the mounting surface give the track a low-profile finish that works in rooms with lower ceilings or where a bulkier system would dominate the ceiling plane. The satin nickel finish provides a neutral metallic tone that pairs with both warm and cool interior palettes.\u003c\/p\u003e\n\u003cp\u003eThe track is supplied with live and dead end accessories, allowing it to be wired at one end and capped at the other, or joined to additional 2m sections to create longer runs. The aluminium extrusion houses a copper conductor rated at 10A continuous, which translates to a maximum 2,300W load across all track heads fitted to the single 2m rail. The IP20 rating limits use to dry indoor environments.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e35 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eSatin Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4120369_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_798856.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat track heads are compatible?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe track accepts Knightsbridge single circuit track heads and any third-party track heads designed for the same single circuit standard. Check the track head specification to confirm compatibility before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum load?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 10A rating allows a maximum 2,300W total load across all track heads fitted to the 2m rail. If you fit five track heads, each should not exceed 460W on average, though individual heads can draw more provided the total stays under 10A.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple tracks be joined?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Additional 2m sections can be joined using straight connectors (sold separately) to create longer continuous runs. The total load across all joined sections must still respect the 10A circuit rating of the mains supply feeding the track.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating limits use to dry indoor environments. Bathrooms require IP44 or higher for zones near water sources.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294001488139,"sku":"TRK2MAS","price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/849810_cc88c0f5-87fa-4956-bd2b-40f430738d73.jpg?v=1714667208"},{"product_id":"single-circuit-track-10a-white-2m-knightsbridge","title":"Single Circuit Track 10A White 2m - Knightsbridge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge TRK2MAW is a 2m single circuit track rated at 10A on 230V mains, supplied in a white powder-coated aluminium finish with both live and dead end caps included. The track provides a single continuous circuit along its 2000mm length, allowing compatible track spotlights to be positioned, removed and repositioned without rewiring.\u003c\/p\u003e\n\u003cp\u003eDesigned for retail, gallery, kitchen and residential accent lighting where adjustable directional light is needed, the track mounts to ceilings or soffits either surface-mounted or recessed. The 35mm width and 17mm projection keep the track visually recessed when fitted with spotlights. The 10A rating supports up to six typical LED track spots (assuming 1.5A draw each) or four higher-wattage halogen heads on a single run.\u003c\/p\u003e\n\u003cp\u003eThe aluminium body with internal copper conductors provides a rigid mounting surface that resists sagging across the 2m span when installed with proper fixing centres. The white finish integrates with white ceilings and remains neutral when used in spaces where the track itself should recede behind the spotlights. The track accepts standard Knightsbridge and universal single-circuit track adapters in both straight and rotating configurations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e35 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4120368_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_798858.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow many spotlights can this track support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 10A rating allows up to 2,300W total load. Most LED track spots draw 6-15W each, so the track can support 10-20 LED heads depending on individual wattage. Halogen spots drawing 35-50W each would limit the track to 4-6 heads. Always check the combined wattage of all fittings before connecting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included with the track?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe track is supplied with both a live end cap (for mains connection) and a dead end cap (to terminate the opposite end). Track spotlights and their adapters are sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the track be cut to a shorter length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The aluminium track can be cut with a hacksaw to fit shorter runs. The internal copper conductors must be exposed cleanly at the cut end and the appropriate live or dead end cap fitted to maintain the IP20 rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with universal track systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Knightsbridge single circuit track uses a standard three-wire configuration compatible with most universal single-circuit track adapters. Check adapter specifications before purchasing if mixing brands.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294001520907,"sku":"TRK2MAW","price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/849812_9b701409-6310-473a-b4c1-052fffcefb21.jpg?v=1714667210"},{"product_id":"3m-single-circuit-track-10a-black","title":"3m Single Circuit Track 10A - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 3m single circuit track is a 10A-rated aluminium rail with internal copper conductors, finished in matt black and supplied with live and dead end caps. The track measures 35mm wide by 17mm deep and mounts directly to ceilings or bulkheads using the supplied fixings, creating a continuous electrical run for track-mounted spotlights or pendant adapters.\u003c\/p\u003e\n\u003cp\u003eDesigned for retail, hospitality, gallery and commercial installations where multiple light fittings need to be positioned and repositioned along a single run, the track accepts any fitting with a compatible single-circuit track adapter. The 10A rating at 230V supports up to 2,300W total load across all fittings on the run, allowing between 4-8 typical LED track spotlights depending on wattage. The 3m length suits larger spaces or extended runs where continuous coverage is needed without joins.\u003c\/p\u003e\n\u003cp\u003eThe aluminium extrusion provides rigidity without excessive weight, and the black powder-coat finish resists marking and corrosion in typical indoor environments. The track is Class I earthed and carries an IP20 rating, making it suitable for dry interior locations only. The live and dead end caps close the track terminals at both ends of the run, with the live end accepting the mains feed and the dead end providing a clean termination.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e35 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4120370_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_798860.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fittings are compatible with this track?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe track accepts any spotlight or pendant adapter designed for single-circuit track systems. Most Knightsbridge track spotlights and third-party single-circuit track fittings will fit, provided they use the same adapter profile.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the track be cut to length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The aluminium extrusion can be cut with a hacksaw or mitre saw to fit shorter runs. After cutting, file the edges smooth and refit the end caps to the new cut ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many spotlights can be fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 10A rating at 230V supports up to 2,300W total load. A typical 6W LED track spotlight draws 0.03A, allowing approximately 300 fittings theoretically, but practical installations typically run 4-8 spotlights per 3m track depending on spacing and light intensity requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the track dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe track itself is passive wiring. Dimming depends on the spotlights fitted to it and the dimmer controlling the circuit. If the track is fed from a dimmer-compatible circuit and the spotlights are dimmable LEDs, the system will dim.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294002077963,"sku":"TRK3MABK","price":34.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/849908_1ecb4436-1328-4fb4-851c-e8131e2d6b8d.jpg?v=1714667212"},{"product_id":"10a-single-circuit-track-white-3m-knightsbridge","title":"10A Single Circuit Track White 3m - Knightsbridge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10A single circuit track is a 3m length of white aluminium track housing two copper conductors that carry mains power to track-mounted spotlights and pendants. The track arrives with both live and dead end caps fitted, providing termination at both ends of the run and allowing immediate connection to a UK mains supply without additional accessories.\u003c\/p\u003e\n\u003cp\u003eDesigned for retail spaces, residential kitchens, galleries and offices where lighting needs to be repositioned or added over time, the track accepts any standard single-circuit track fitting using the three-contact clip system. Spotlights and pendants slide into position along the track and lock with a quarter-turn, making layout changes simple without rewiring. The 10A rating supports up to 2,300W of combined load, enough for 10-15 LED track spots or 4-6 track pendants depending on individual wattage.\u003c\/p\u003e\n\u003cp\u003eThe white powder-coated aluminium finish matches standard ceiling paint and the 35mm width with 17mm projection keeps the track visually minimal when surface-mounted. The track can be cut to shorter lengths on-site using a hacksaw if needed, though cuts require new end caps (sold separately). Copper conductors inside the aluminium channel ensure consistent contact as fittings are moved along the track, reducing voltage drop compared to steel conductor alternatives.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e35 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4120371_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_798866.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fittings work with this track?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAny standard single-circuit track spotlight or pendant using the three-contact clip system will fit. The track is compatible with most UK and European track fittings rated for single-circuit operation, including GU10 and LED spotlights from Knightsbridge and other manufacturers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the track be cut to a shorter length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The track can be cut on-site using a hacksaw. New end caps are required for the cut end and are sold separately. The live end cap (with mains connection) cannot be moved, so plan the cut from the dead end of the track.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the track mounted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe track surface-mounts to ceilings or walls using the fixing holes along the top channel. Screws and wall plugs are not included. For ceiling mounting, ensure fixings are secure into joists or use appropriate ceiling anchors for plasterboard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum load?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe track is rated at 10A on 230V, giving a maximum combined load of 2,300W across all fittings on the track. For LED track spots this typically supports 10-15 fittings; for higher-wattage halogen or track pendants, fewer fittings may be needed to stay within the limit.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294002372875,"sku":"TRK3MAW","price":34.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/849916_5567e6b4-665f-45cf-93c6-58cc596df808.jpg?v=1714667214"}],"url":"https:\/\/niori.co.uk\/collections\/tracks.oembed","provider":"Niori","version":"1.0","type":"link"}