{"title":"Speaker Stands \u0026 Mounts","description":"\u003cp\u003eOur range of speaker stands and wall mounts covers tripod and telescopic stands, studio monitor stands, sub poles, wall brackets and the adapters that connect them. Getting a speaker off the floor and up to ear height does more for how a system sounds than almost any other single change. Found it cheaper elsewhere? We will match the price.\u003c\/p\u003e","products":[{"product_id":"qtx-adjustable-35mm-t-bar-adapter-for-speaker-stands","title":"QTX Adjustable 35mm T-Bar Adapter for Speaker Stands","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis adjustable T-bar adapter from QTX sits on top of any 35mm speaker stand and lets you mount two speakers from a single pole. The bar adjusts to suit large or small speakers, so you can space the mounts to match your cabinets. With the poles fully extended on both sides, the distance between them is 490mm. When retracted, that drops to 310mm.\u003c\/p\u003e\n\u003cp\u003eThe adapter is made from steel, which keeps it solid under load without adding too much bulk. Each mount takes up to 20kg, so you have room for a pair of mid-sized speakers or lighting fixtures. The whole unit weighs 1.3kg, so it packs down easily alongside the rest of your stands and cabling for transport between gigs.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward: drop the adapter onto a compatible 35mm pole and slide your speakers onto the two 35mm mounts. This is a handy way to raise a stereo pair off the floor for better coverage, whether you are running a mobile disco, a small PA setup or a live band. Note that a 35mm pole here refers to the standard speaker stand top tube used across most UK and US kit.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (fully extended)\u003c\/td\u003e\n\u003ctd\u003e490mm between poles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (retracted)\u003c\/td\u003e\n\u003ctd\u003e310mm between poles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. load\u003c\/td\u003e\n\u003ctd\u003e20kg on each mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.30KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size stand does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt fits on top of any standard 35mm speaker stand pole.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can each mount hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach mount takes a maximum load of 20kg, so 40kg across the pair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the spacing between the two mounts?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFully extended the poles sit 490mm apart, and retracted they sit 310mm apart.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the adapter made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is made from steel for a solid hold under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much does the adapter weigh?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unit weighs 1.3kg, so it is easy to pack and carry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mount two speakers at once?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it has two 35mm mounts so you can run a stereo pair from one stand.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270508863755,"sku":"129.092UK","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/129092UK_0.jpg?v=1784964580"},{"product_id":"qtx-adjustable-speaker-wall-bracket-mount","title":"QTX Adjustable Speaker Wall Bracket Mount","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX speaker wall bracket gives you a solid way to mount speaker boxes onto a wall. It's built to hold a decent weight, taking up to 40kg, so it suits a range of passive and active speakers used in fixed installs, bars, function rooms and home setups. The bracket comes with the mounting hardware you need to fix it in place, so you can get on with the job without hunting for extra parts.\u003c\/p\u003e\n\u003cp\u003eVertical adjustment is where this bracket earns its place. You can set it to one of three angles, 45°, 67.5° or 90°, which lets you aim the speaker down towards a seated audience or keep it level for wider coverage. Getting the angle right makes a real difference to how the sound lands in a room, and having fixed positions means you can repeat the same setup each time. The pole diameter is 35mm, which works with common speaker box fittings.\u003c\/p\u003e\n\u003cp\u003eThe bracket measures 200 x 116 x 280mm and weighs 1.56kg, so it stays out of the way once fitted while still feeling sturdy. It's a straightforward piece of kit that does one job well, holding your speaker where you want it and keeping it there. If you're setting up a permanent or semi-permanent audio system and need to get speakers off the floor and onto the wall, this is a practical, no-nonsense choice.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. weight load\u003c\/td\u003e\n\u003ctd\u003e40.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePole diameter\u003c\/td\u003e\n\u003ctd\u003e35mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e200mm x 116mm x 280mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.56KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can the bracket hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bracket has a maximum weight load of 40kg, which covers most standard speaker boxes used in home and small venue setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat angles can I set the bracket to?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can adjust it to three vertical positions: 45°, 67.5° and 90°. This lets you aim the speaker down or keep it level depending on your room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with fixings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the bracket is supplied with the mounting hardware you need to fix it to a wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat pole diameter does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pole diameter is 35mm, which is compatible with common speaker box mounting sockets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the bracket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures 200 x 116 x 280mm and weighs 1.56kg.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270509945099,"sku":"129.093UK","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/129093UK_0.jpg?v=1784964602"},{"product_id":"qtx-adjustable-speaker-wall-bracket-25kg","title":"QTX Adjustable Speaker Wall Bracket 25kg","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eWe built this QTX speaker wall bracket for mounting speaker boxes securely to a wall. It takes a maximum load of 25kg, so it suits a good range of PA and passive speakers used in bars, function rooms and home setups. The bracket holds the speaker steady while keeping it up and out of the way, which frees up floor space and helps you aim the sound where you want it.\u003c\/p\u003e\n\u003cp\u003eThe angle adjusts from 45 to 90 degrees, and the bracket also gives you horizontal adjustment so you can point the speaker across a room rather than straight down. That flexibility matters when you are trying to cover a wide seating area or reduce dead spots. The pole diameter is 35mm, a common fit for many speaker cabinets that use a top-hat or socket mount.\u003c\/p\u003e\n\u003cp\u003eEach bracket measures 200 x 115 x 300mm and weighs 1.3kg, so it is compact but solid. We supply the mounting hardware in the box, so you have the fixings needed to get it onto a suitable wall. Fit it to a sound, load-bearing surface and check the fixings match your wall type. For paired stereo or spread coverage you will want two, one for each side of the room.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. weight load\u003c\/td\u003e\n\u003ctd\u003e25.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePole diameter\u003c\/td\u003e\n\u003ctd\u003e35mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e200mm x 115mm x 300mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.30KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/129095UK_1949bb71-d2b4-4eaa-b1ae-59183ecb105c.pdf?v=1784964618\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum weight this bracket holds?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt takes a maximum load of 25kg, which covers many passive and active PA speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow far does the angle adjust?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bracket adjusts from 45 to 90 degrees, and it also offers horizontal adjustment so you can aim the speaker across the room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat pole diameter does it fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pole is 35mm in diameter, a common size for speaker cabinets with a socket or top-hat mount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with fixings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, we supply mounting hardware in the box. Make sure the fixings suit your wall type before installing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need two brackets?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor a stereo pair or wider coverage you will need two, one for each speaker. This listing is for a single bracket.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270510600459,"sku":"129.095UK","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/129095UK_0.jpg?v=1784964629"},{"product_id":"qtx-adjustable-speaker-wall-brackets-pair","title":"QTX Adjustable Speaker Wall Brackets (Pair)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThese wall brackets from QTX give you a solid way to mount speakers off the ground and angle them where you want the sound to go. They come supplied as a pair, so you have everything you need for a left and right setup in one purchase. Each bracket carries up to 50kg, which covers most passive and active PA cabinets you're likely to hang.\u003c\/p\u003e\n\u003cp\u003eThe design suits speakers with a 35mm pole-mount socket, and the tube diameter matches at 35mm. Tilt adjustment runs from 65° to 90°, so you can aim the speaker down towards an audience or keep it level for a wider throw. The arm extends away from the wall in four set positions: 300mm, 320mm, 340mm and 360mm. That gives you a bit of flexibility to clear window ledges, skirting or other obstructions without hunting for a different bracket.\u003c\/p\u003e\n\u003cp\u003eBuild is robust, with each bracket measuring 250 x 100mm and weighing 1.43kg, so they sit flush and hold their shape under load. One thing to note: mounting hardware is not included, so you'll want to pick screws and wall plugs (US: anchors) to match your wall type, whether that's brick, block or timber stud. Once fitted, they keep your speakers up and out of the way in a fixed spot, which is handy for bars, halls, gyms and home installs where floor stands aren't practical.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt range\u003c\/td\u003e\n\u003ctd\u003e65° to 90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustable extension (from wall)\u003c\/td\u003e\n\u003ctd\u003e300mm, 320mm, 340mm, 360mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube diameter\u003c\/td\u003e\n\u003ctd\u003e35mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. weight load\u003c\/td\u003e\n\u003ctd\u003e50.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracket dimensions\u003c\/td\u003e\n\u003ctd\u003e250mm x 100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.43KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow many brackets do I get?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThey're supplied in pairs, so you get two brackets in one purchase, enough for a left and right speaker setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size pole-mount do they fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThey suit speakers with a 35mm pole-mount socket. The tube diameter is 35mm to match.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can each bracket hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach bracket takes a maximum load of 50kg, which covers most PA and installation speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the mounting hardware included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Screws and wall plugs are not supplied, so you'll need to choose fixings that suit your wall type.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow far do they extend from the wall?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe arm has four set extension positions: 300mm, 320mm, 340mm and 360mm from the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I angle the speakers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Tilt adjustment runs from 65° to 90°, so you can aim the speakers down or keep them level.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270511878411,"sku":"129.097UK","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/129097UK_0.jpg?v=1784964663"},{"product_id":"qtx-adjustable-tilt-speaker-wall-bracket","title":"QTX Adjustable Tilt Speaker Wall Bracket","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis QTX speaker wall bracket gives you a strong, adjustable way to mount speaker boxes on a wall. It handles both horizontal positioning and tilt, so you can angle the sound where it needs to go. The projection adjusts from 160mm at its shortest to 335mm at its fullest, which lets you set the speaker away from the wall or keep it tucked in close.\u003c\/p\u003e\n\u003cp\u003eTilt runs from 45° right through to 90°, giving you plenty of room to aim the speaker down towards an audience or crowd. An adjustable back support helps secure speaker boxes of different sizes, holding the cabinet steady once it is in place. The bracket takes a maximum load of 15kg, so it suits smaller PA and installation speakers rather than heavy full-range boxes.\u003c\/p\u003e\n\u003cp\u003eThe pole (also called a mounting post) measures 35mm in diameter, a common size that matches many speaker cabinets fitted with a top-hat socket. Overall the bracket stands 230mm high and 385mm wide. Mounting hardware is supplied, so you have the fixings needed to get it onto the wall. It is a practical choice for fixed installs where you want a speaker held firmly and pointed at the right angle.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. weight load\u003c\/td\u003e\n\u003ctd\u003e15.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePole diameter\u003c\/td\u003e\n\u003ctd\u003e35mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e230mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e385mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can the bracket hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt takes a maximum load of 15kg, which suits smaller PA and installation speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow far does the bracket extend from the wall?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProjection adjusts from 160mm at the minimum to 335mm at the maximum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat tilt angles are possible?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTilt adjusts from 45° to 90°, so you can aim the speaker down towards a crowd.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with fixings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, mounting hardware is supplied so you have the fixings to fit it to the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat pole diameter does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe mounting pole (post) is 35mm in diameter, matching many speaker cabinet sockets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it hold different size speaker boxes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, an adjustable back support secures cabinets of different sizes.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270513549579,"sku":"129.098UK","price":27.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/129098UK_0.jpg?v=1784964684"},{"product_id":"av-link-universal-adjustable-speaker-wall-mounts-pair","title":"AV:Link Universal Adjustable Speaker Wall Mounts (Pair)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis pair of universal speaker mounts is made to work with a wide range of small satellite, bookshelf and surround speakers. They handle wall and ceiling mounting of loads up to 3.5kg each, which suits most compact home cinema and hi-fi speakers. The design keeps things simple, so you can position your speakers where you want them without a fixed bracket dictating the angle.\u003c\/p\u003e\n\u003cp\u003eAngle adjustment is handled by a thumbscrew. Loosen it to set the swivel and tilt, then tighten it back down to lock the speaker in place. You get up to ±70° of swivel and ±20° of tilt, giving you room to aim the sound towards your listening position. Each mount sits 64mm from the wall and measures 87 x 50 x 64mm, with a weight of 112g per bracket.\u003c\/p\u003e\n\u003cp\u003eInstallation is straightforward and the mounts come supplied with a full fixing kit, including M5 mounting bolts and wall fixings (also called wall plugs or anchors in the US). The speaker mounting screw takes a maximum diameter of 6.5mm, so check your speaker's mounting point before fitting. Sold as a pair, they give you a matching set for stereo or surround setups around the room.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. weight load\u003c\/td\u003e\n\u003ctd\u003e3.50KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance from wall\u003c\/td\u003e\n\u003ctd\u003e64mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker mounting screw max. diameter\u003c\/td\u003e\n\u003ctd\u003e6.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003e±70°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt angle adjustment\u003c\/td\u003e\n\u003ctd\u003e±20°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e87mm x 50mm x 64mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.11KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/129200UK_c5b00192-eb57-4395-bfdb-3b0c0be8416c.pdf?v=1784965450\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can each mount hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach mount supports loads up to 3.5kg, which covers most small satellite, bookshelf and surround speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan these be used on ceilings as well as walls?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, they are rated for both wall and ceiling mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much can the speakers be angled?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou get up to ±70° of swivel and ±20° of tilt, adjusted via the thumbscrew and then locked in place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo they come with fixings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, each pair is supplied with a mounting kit including M5 bolts and wall fixings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow far do the mounts sit from the wall?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach mount holds the speaker 64mm from the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size mounting screw do my speakers need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe speaker mounting screw takes a maximum diameter of 6.5mm, so check your speaker's fitting before installing.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270531703051,"sku":"129.200UK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/129200UK_0.jpg?v=1784965474"},{"product_id":"av-link-universal-side-clamping-speaker-wall-mount","title":"AV:Link Universal Side Clamping Speaker Wall Mount","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis universal side clamping speaker wall mount from AV:Link holds medium to large bookshelf and satellite speakers weighing up to 15kg. The adjustable side clamps grip speakers between 135 and 275mm wide, so it works with a broad selection of models rather than being tied to a single make. Foam-covered, non-slip pads on the clamps lock each speaker firmly in place while protecting the cabinet finish from marks and scratches.\u003c\/p\u003e\n\u003cp\u003eThe bracket is built from solid steel and finished in a black powder coating that stands up to everyday knocks. It swivels through ±90° and tilts ±8°, letting you angle each speaker towards your seating position for better sound placement. An integrated cable guide (cable channel) routes your speaker wire out of sight, keeping the wall neat and free of loose cords. The mount measures 286 x 139 x 89mm and weighs 1.275kg.\u003c\/p\u003e\n\u003cp\u003eSetup is straightforward. Each bracket comes with the tools and wall fixings you need, so you can fit it without buying extra hardware. Fix the plate to your wall, position the speaker within the clamps and tighten to secure. Whether you are setting up a surround sound layout or freeing up shelf and floor space, this mount gives you a firm, adjustable hold. Buy a pair for a matched left and right setup, or use singles where you only need one point.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. weight load\u003c\/td\u003e\n\u003ctd\u003e15.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible speaker width\u003c\/td\u003e\n\u003ctd\u003e135-275mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003e±90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt angle adjustment\u003c\/td\u003e\n\u003ctd\u003e±8°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e286mm x 139mm x 89mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.27KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/129202UK_1d736a62-aa7f-4bb7-9611-40ecbfe6a720.pdf?v=1784965628\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size and weight of speaker does it hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt suits medium to large bookshelf and satellite speakers up to 15kg in weight, with side clamps that adjust to fit widths from 135mm to 275mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much can it swivel and tilt?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bracket swivels ±90° and tilts ±8°, so you can angle the speaker towards your listening position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it mark or damage my speakers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The side clamps have foam-covered non-slip pads that grip firmly while protecting the speaker cabinet from scratches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre fixings and tools included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each bracket comes with all the hardware and wall fixings needed for assembly and installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it hide the speaker cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. An integrated cable guide routes the wire along the bracket to keep the wall tidy and free of loose cords.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this sold as a single mount or a pair?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is supplied as a single bracket. For a matched left and right setup, order two.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270534357259,"sku":"129.202UK","price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/129202UK_0.jpg?v=1784965649"},{"product_id":"adastra-um01-universal-speaker-brackets-black-pair","title":"Adastra UM01 Universal Speaker Brackets, Black (Pair)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Adastra UM01 is a pair of universal speaker brackets designed to hold small home cinema and surround sound satellite speakers. They work with most compact speakers, so you can mount them on a wall and free up shelf and floor space. The brackets are finished in black to sit quietly against a wall without drawing attention.\u003c\/p\u003e\n\u003cp\u003eEach bracket swivels left and right and tilts up or down, so you can point each speaker where you want the sound to go. This helps you set up a surround sound layout and get the angle right for your seating position. The set arrives supplied in pairs, giving you a matched left and right mount straight from the box.\u003c\/p\u003e\n\u003cp\u003eTo suit different speakers and wall gaps, three sizes of 6mm swivel arm are included: a 20mm straight arm, a 50mm right-angled arm and an 85mm right-angled arm. The mounting plate measures 72 x 38 x 42mm with fixing centres of 62mm, and each bracket takes a maximum load of 3.5kg. At 177g per bracket they are light to fit and easy to reposition later if you move things around.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting dimensions\u003c\/td\u003e\n\u003ctd\u003e72mm x 38mm x 42mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting plate fixing centres\u003c\/td\u003e\n\u003ctd\u003e62mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. load\u003c\/td\u003e\n\u003ctd\u003e3.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.18KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speakers do these brackets fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThey are made for small home cinema and surround sound satellite speakers. Check your speaker weighs no more than 3.5kg and has fixing points that suit the 62mm mounting plate centres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the brackets sold singly or in pairs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThey come supplied in pairs, so you get two brackets for a left and right speaker setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can each bracket hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach bracket has a maximum load of 3.5kg, which suits most compact satellite speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I adjust the speaker angle after fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each bracket swivels left and right and tilts up or down, so you can aim the speaker at your seating position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat swivel arms are included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThree sizes of 6mm arm: a 20mm straight arm, a 50mm right-angled arm and an 85mm right-angled arm, giving you options for different wall gaps.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270537306379,"sku":"129.207UK","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/129207UK_0.jpg?v=1784965696"},{"product_id":"adastra-um01-universal-swivel-speaker-brackets-white","title":"Adastra UM01 Universal Swivel Speaker Brackets, White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Adastra UM01 is a pair of universal speaker brackets in white, made to hold small home cinema and surround sound satellite speakers. They swivel left and right and tilt up or down, so you can point each speaker where you need it once it is fixed to the wall. Because they come as a pair, you have what you need for two speakers straight out of the box.\u003c\/p\u003e\n\u003cp\u003eEach bracket comes with three sizes of 6mm diameter swivel arm, giving you a choice of spacing and angle to suit the room and the speaker. There is a 20mm straight arm, a 50mm right-angled arm and an 85mm right-angled arm. That range of arm lengths helps you clear skirting, corners and awkward wall features while keeping the speaker close to where you want the sound. The mounting plate has fixing centres of 62mm, and the mounting dimensions are 72 x 38 x 42mm.\u003c\/p\u003e\n\u003cp\u003eEach bracket takes a maximum load of 3.5kg, which covers most compact satellite and surround speakers, and weighs 177g on its own. The combination of swivel and tilt makes it straightforward to fine-tune the direction of the sound after fitting, rather than being locked to one fixed position. If you are setting up a 5.1 or similar surround system with small speakers, these brackets give you a simple, adjustable way to get them off the shelf and onto the wall.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting dimensions\u003c\/td\u003e\n\u003ctd\u003e72mm x 38mm x 42mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting plate fixing centres\u003c\/td\u003e\n\u003ctd\u003e62mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. load\u003c\/td\u003e\n\u003ctd\u003e3.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.18KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow many brackets are in the box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UM01 is supplied in pairs, so you get two brackets ready to mount two speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat swivel arms are included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach bracket comes with three sizes of 6mm diameter arm: a 20mm straight arm, a 50mm right-angled arm and an 85mm right-angled arm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can each bracket hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach bracket has a maximum load of 3.5kg, which suits most small satellite and surround sound speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the speakers be angled after fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The brackets swivel left and right and tilt up or down, so you can adjust the direction of each speaker once it is on the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the mounting plate fixing centres?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe mounting plate fixing centres are 62mm, with overall mounting dimensions of 72 x 38 x 42mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speakers are these designed for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThey are made for small home cinema and surround sound satellite speakers up to 3.5kg.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270539010315,"sku":"129.208UK","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/129208UK_0.jpg?v=1784965719"},{"product_id":"citronic-adjustable-ss84-aluminium-speaker-stand","title":"Citronic Adjustable SS84 Aluminium Speaker Stand","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic SS84 is a lightweight aluminium speaker stand built to hold most speaker cabinets fitted with a tophat mount. The 35mm diameter pole suits the standard fitting found on the majority of PA and active speakers, and the stand carries a maximum load of 50kg. At just 1.95kg, it is easy to carry between gigs and quick to set up on stage or at an event.\u003c\/p\u003e\n\u003cp\u003eHeight adjusts across five lockable levels between 1.0m and 1.92m, so you can set the speaker at the right position for a seated audience or lift it above head height for wider coverage. A plastic knuckle and centre clamp hold each setting in place, while rubber anti-slip feet keep the base steady on smooth floors. When you are done, the stand folds down to 1040mm for storage and transport.\u003c\/p\u003e\n\u003cp\u003eThis is a single stand suitable for mobile DJs, bands, hire companies and venues that need a reliable support for their speakers. The aluminium build keeps the weight low without giving up on the 50kg load rating, making it a practical choice for regular setup and pack down. Pair two together for a full stereo rig, or keep one on hand as a spare.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight adjustment\u003c\/td\u003e\n\u003ctd\u003e1.0 - 1.92m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube\u003c\/td\u003e\n\u003ctd\u003e35mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions : collapsed\u003c\/td\u003e\n\u003ctd\u003e1040mm x 115mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.95KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. weight load\u003c\/td\u003e\n\u003ctd\u003e50.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat pole size does the SS84 use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a 35mm diameter pole, which fits most speaker cabinets that have a standard tophat mount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can it hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe maximum load is 50kg, which covers most active and passive PA speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat height range does it cover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can set it between 1.0m and 1.92m across five lockable levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow heavy is the stand?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt weighs 1.95kg, so it is easy to carry and quick to set up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow small does it fold down?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt collapses to 1040mm long with a 115mm base diameter for storage and transport.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it stay steady on smooth floors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it has rubber anti-slip feet to keep the base in place.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271928013067,"sku":"180.184UK","price":34.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/180184UK_0.jpg?v=1785010229"},{"product_id":"qtx-desktop-speaker-stands-pair-with-foam-pads","title":"QTX Desktop Speaker Stands, Pair with Foam Pads","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThese desktop speaker stands from QTX give your monitors a raised platform in the studio, home or office. They come as a pair with a compact footprint, so they sit neatly on a desk without crowding your workspace. By lifting your speakers off the surface, they help you set them at a better listening height and get the positioning right for accurate sound.\u003c\/p\u003e\n\u003cp\u003eEach stand has a top plate measuring 160 x 130mm sitting on a slightly wider base of 190 x 130mm, with an overall height of 130mm. Foam surface pads are supplied to sit between the speaker and the plate, cutting down unwanted vibration that can travel through the desk and colour what you hear. The set weighs 2.3kg in total, which keeps everything stable once your speakers are in place.\u003c\/p\u003e\n\u003cp\u003eThey are made for small nearfield monitor speakers (studio monitors) and bookshelf speakers up to 5 inches. If you work at a desk and want your monitors angled towards your ears rather than firing across the surface, these stands do the job simply. The finish is plain and low-key, so they blend in with most setups whether you are mixing, gaming or just listening at home.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate dimensions\u003c\/td\u003e\n\u003ctd\u003e160mm x 130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase : dimensions\u003c\/td\u003e\n\u003ctd\u003e190mm x 130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. load\u003c\/td\u003e\n\u003ctd\u003e5\" speaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e190mm x 130mm x 130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.30KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size speakers do these stands suit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThey are designed for small nearfield monitor speakers and bookshelf speakers up to 5 inches. Larger, heavier speakers are not recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre they sold individually or as a pair?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThey are supplied as a pair, so you get two stands in the box ready for a left and right speaker setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo they help with vibration?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Foam surface pads are included to sit under your speakers and reduce unwanted vibration passing into the desk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow tall are the stands?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach stand stands 130mm tall, raising your speakers to a more comfortable listening height on a desk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the top plate size?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe top plate measures 160 x 130mm, with a slightly wider base of 190 x 130mm for stability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these suitable for desk use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Their compact footprint is made for desktop use in the studio, home or office.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271928111371,"sku":"180.193UK","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/180193UK_0.jpg?v=1785010290"},{"product_id":"qtx-adjustable-square-base-speaker-stand-182cm-black","title":"QTX Adjustable Square Base Speaker Stand, 182cm, Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis QTX speaker stand uses a large steel square base for stability, with an adjustable height that runs from 104cm up to 182cm. The 48x48cm base plate sits on four rubber feet to protect your flooring, and it includes two insert holes so you can tidy cables underneath the stand. Integrated carry handles are built into the base to make moving it around a little easier.\u003c\/p\u003e\n\u003cp\u003eThe pole measures 35mm at the upper section and 38mm at the lower, and the stand assembles using a 10mm bolt that screws upwards from beneath the base plate into the mounting pole. To set your height, use the hand fastener along with the safety pin for added security. The whole stand weighs 7kg, so it stays steady without being awkward to lift and reposition between spaces.\u003c\/p\u003e\n\u003cp\u003eWe recommend this stand for a single speaker or one lighting effect of up to 15kg, which covers most active and passive PA speakers as well as compact lighting fixtures. It ships in two boxes and works well as part of a mobile rig or a fixed setup at home. The square base gives it a solid footprint on stage floors, hard surfaces and carpet alike.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e104-182cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube diameter\u003c\/td\u003e\n\u003ctd\u003e35mmØ (upper)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube diameter\u003c\/td\u003e\n\u003ctd\u003e38mmØ (lower)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase dimensions\u003c\/td\u003e\n\u003ctd\u003e48mm x 48cm w \/ 35mm M10 Bolt \u0026amp; Spring washer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e7.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePacked\u003c\/td\u003e\n\u003ctd\u003eShips in 2 boxes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow tall does this stand extend?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe height adjusts from 104cm up to 182cm, set using the hand fastener and safety pin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat weight can it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is rated for a single speaker or one lighting effect of up to 15kg.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size is the pole?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pole is 35mm in diameter at the upper section and 38mm at the lower section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the stand assembled?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 10mm M10 bolt with spring washer screws upwards from under the base plate into the mounting pole.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the base mark my floor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 48x48cm base has four rubber feet to protect flooring, plus cable insert holes to keep leads tidy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it arrive?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt ships in two boxes and weighs 7kg in total.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271928144139,"sku":"180.195UK","price":69.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/180195UK_0.jpg?v=1785010320"},{"product_id":"qtx-adjustable-square-base-white-speaker-stand","title":"QTX Adjustable Square Base White Speaker Stand","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis QTX speaker stand keeps things steady with a large steel square base measuring 48x48cm. The weight and footprint give you a stable platform, which matters when you're setting up a speaker or a single lighting effect in a busy room. Four rubber feet sit underneath to protect the floor and stop the stand sliding about.\u003c\/p\u003e\n\u003cp\u003eYou can set the height anywhere from 104cm up to 182cm, so it works whether you want a speaker low for a small space or raised up for wider coverage. The upper pole is 35mm in diameter and the lower section is 38mm. Adjust the height using the hand fastener, then drop in the safety pin for extra reassurance. The stand is put together with a 10mm bolt that screws up from beneath the base plate into the mounting pole. It supports a load of up to 15kg.\u003c\/p\u003e\n\u003cp\u003eThe base has a couple of practical touches. Two insert holes let you tidy cables away underneath rather than leaving them trailing, and integrated carry handles make it easier to move the stand between jobs or into storage. The whole thing weighs 7kg and ships in two boxes. Note that AV kit often uses 'stand' the same way on both sides of the Atlantic, though you may see 'speaker pole' used for the tube section in some US listings.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e104-182cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube diameter\u003c\/td\u003e\n\u003ctd\u003e35mmØ (upper)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube diameter\u003c\/td\u003e\n\u003ctd\u003e38mmØ (lower)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase dimensions\u003c\/td\u003e\n\u003ctd\u003e48mm x 48cm w \/ 35mm M10 Bolt \u0026amp; Spring washer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e7.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePacked\u003c\/td\u003e\n\u003ctd\u003eShips in 2 boxes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can this stand hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt supports a speaker or a single lighting effect of up to 15kg.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat height range does it cover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can adjust it from 104cm up to 182cm using the hand fastener and safety pin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow big is the base?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe steel square base plate measures 48x48cm and has four rubber feet to protect flooring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the stand assembled?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 10mm bolt screws upwards from under the base plate into the mounting pole. The base also comes with a spring washer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size are the poles?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe upper tube is 35mm in diameter and the lower tube is 38mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it delivered?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe stand weighs 7kg and ships in two boxes.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271928209675,"sku":"180.196UK","price":69.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/180196UK_1.jpg?v=1785010350"},{"product_id":"qtx-adjustable-studio-monitor-floor-stand","title":"QTX Adjustable Studio Monitor Floor Stand","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eOur QTX adjustable monitor floor stand gives your speakers a steady, dependable platform in the studio or at home. It's built for small and midfield studio monitors, so whether you're mixing tracks or setting up a listening space, the stand holds your speaker in place without wobble. The top plate measures 240 x 230mm and the base sits at 250 x 225mm, giving a solid footprint that keeps everything grounded.\u003c\/p\u003e\n\u003cp\u003eGetting the height right matters when you're positioning monitors, and this stand offers five settings to help you find the sweet spot. Using the hand fastener and safety pin, you can set it to 340mm, 390mm, 440mm, 490mm or 540mm, with a minimum height of 300mm. That range covers most seated and standing setups, so you can get your tweeters level with your ears whatever your desk or chair height. The safety pin adds reassurance once you've locked in your chosen position.\u003c\/p\u003e\n\u003cp\u003eFoam surface pads come included to cut down unwanted vibrations and keep your monitor gripped firmly to the plate. This helps stop the speaker shifting around and reduces resonance passing through the stand. Each stand carries a maximum weight load of 15kg and weighs 2.53kg itself, so it stays stable under load while remaining easy to move when you need to rearrange your space. It's a practical bit of kit for anyone setting up a home studio or tidying up an existing one.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate dimensions\u003c\/td\u003e\n\u003ctd\u003e240mm x 230mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase : dimensions\u003c\/td\u003e\n\u003ctd\u003e250mm x 225mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e300mm (minimum)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight adjustments\u003c\/td\u003e\n\u003ctd\u003e340mm, 390mm, 440mm, 490mm, 540mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. weight load\u003c\/td\u003e\n\u003ctd\u003e15.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.53KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat height positions does the stand offer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe stand has five height settings: 340mm, 390mm, 440mm, 490mm and 540mm, with a minimum height of 300mm. You adjust it using the hand fastener and safety pin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can the stand hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach stand takes a maximum weight load of 15kg, which suits small and midfield studio monitors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stop my monitors vibrating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFoam surface pads are included to minimise unwanted vibrations and grip the speaker, helping keep your monitor firmly in place and reducing resonance through the stand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size are the top plate and base?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe top plate measures 240 x 230mm and the base measures 250 x 225mm, giving a stable footprint for your speaker.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this stand suitable for home use as well as studios?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It's made for both studio and home use, providing a sturdy platform for small and midfield monitors wherever you set them up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much does the stand weigh?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe stand weighs 2.53kg, so it stays stable under load while remaining light enough to reposition when needed.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271928340747,"sku":"180.199UK","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/180199UK_rb0.jpg?v=1785078113"},{"product_id":"qtx-35mm-steel-speaker-pole-80cm","title":"QTX 35mm Steel Speaker Pole 80cm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eWe supply these QTX speaker poles for mounting speaker cabinets on top of bass boxes that have top hats fitted. They give you a clean, stable way to raise a speaker to a better height, which helps sound reach further across a room without you having to stack cabinets directly on each other.\u003c\/p\u003e\n\u003cp\u003eThe pole is made from black steel with a 35mm diameter tube, and it comes fitted with rubber end caps to protect both the pole and the equipment it sits in. It handles a maximum weight load of 30kg, so it covers most standard PA and monitor speakers you are likely to use for events, gigs and mobile setups. This one measures 80cm in length, and we also offer a second length in the range if you need more or less height.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward: the pole drops into the top hat socket on your bass box, and the speaker cabinet then slides down over the top of the pole. Because it uses the common 35mm standard, it works with a wide range of cabinets and sub enclosures. If you run a mobile rig or a fixed install, keeping a spare pole to hand saves you time and keeps your speakers positioned where you want them. Do check your own gear rating before loading it to the limit.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. weight load\u003c\/td\u003e\n\u003ctd\u003e30.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube\u003c\/td\u003e\n\u003ctd\u003e35mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003ePoles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat diameter is this speaker pole?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe tube is 35mm in diameter, which is a common standard for speaker poles and top hat sockets on bass boxes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can it hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe maximum weight load is 30kg, which suits most standard PA and monitor speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is this pole?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis version is 80cm long. We also stock a second length in the range if you need a different height.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with end caps?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it is fitted with rubber end caps to protect the pole and the equipment it sits in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is made from black steel, so it is strong enough to support speaker cabinets at height.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my bass box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt fits bass boxes with a top hat socket sized for a 35mm pole. Check your enclosure before ordering.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271928439051,"sku":"180.215UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/180215UK_0.jpg?v=1785010407"},{"product_id":"qtx-telescopic-35mmo-speaker-pole","title":"QTX Telescopic 35mmØ Speaker Pole","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis telescopic speaker pole from QTX gives you a straightforward way to mount satellite cabinets above your bass bins. The 35mmØ fitting is a common standard, so it drops into most compatible tops and sub cabinets without fuss. It extends from 800mm up to 1340mm, letting you set the right height for your room and audience.\u003c\/p\u003e\n\u003cp\u003eHeight settings are held in place by a securing pin, which keeps things locked once you've found the position you want. At its minimum the pole measures 800 x 45 x 95mm, and it weighs 1.4kg, so it packs down and travels easily between gigs or venues. The maximum weight load is 50kg, which covers most satellite tops you're likely to run on a pole like this.\u003c\/p\u003e\n\u003cp\u003eWe think this is a sensible bit of kit for mobile DJs, bands and small PA setups who want to raise their tops for better coverage. Getting your high-frequency cabinets up above head height helps the sound carry across a crowd rather than firing into the nearest few people. Check the weight of your own cabinets against the 50kg limit before use, and make sure your sub or base plate is on a firm, level surface.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (minimum height)\u003c\/td\u003e\n\u003ctd\u003e800mm x 45mm x 95mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight adjustment\u003c\/td\u003e\n\u003ctd\u003e800 - 1340mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. weight load\u003c\/td\u003e\n\u003ctd\u003e50.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.40KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fitting size does this pole use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses a 35mmØ fitting, which is a common standard for satellite tops and sub cabinets. Check your own cabinet's socket before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow high does the pole extend?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt adjusts from 800mm at its lowest to 1340mm fully extended, so you can set the height to suit your room and crowd.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the height locked in place?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA securing pin holds the pole at your chosen setting once extended, keeping the top cabinet steady during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum weight it can hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe maximum weight load is 50kg. Check that your satellite cabinet falls within this limit before mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much does the pole weigh?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt weighs 1.4kg and packs down to 800mm, so it's easy to carry between venues alongside the rest of your gear.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271928504587,"sku":"180.217UK","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/180217UK_0.jpg?v=1785010432"},{"product_id":"qtx-35mm-steel-speaker-pole-120cm","title":"QTX 35mm Steel Speaker Pole 120cm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eWe supply these QTX speaker poles for mounting speaker cabinets on top of bass boxes fitted with top hats. Made from black steel, they hold your top speakers at a sensible height so the sound projects over the crowd rather than into the backs of people's legs. The 35mm diameter tube fits standard top hat sockets, and this version measures 120cm long.\u003c\/p\u003e\n\u003cp\u003eEach pole has rubber end caps fitted at both ends. These protect the socket and the cabinet from scratches, and they help keep the pole seated firmly once it is in place. The steel construction takes a maximum weight load of 30kg, which covers most passive and active top speakers used in mobile and small venue setups.\u003c\/p\u003e\n\u003cp\u003eThese are sold as poles only, so you will need bass boxes with top hats and top cabinets with matching sockets. They come in two lengths, giving you a choice depending on how high you want the top speakers to sit. If you run a pair of speakers you will want two poles, one for each stack. For anyone building a PA or DJ rig, these are a straightforward way to get your tops off the floor.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. weight load\u003c\/td\u003e\n\u003ctd\u003e30.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube\u003c\/td\u003e\n\u003ctd\u003e35mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003ePoles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat diameter are these poles?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe tube is 35mm in diameter, which fits standard top hat sockets on bass boxes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can they hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach pole takes a maximum weight load of 30kg, enough for most top speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is this pole?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis version is 120cm long. The range also comes in a second length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo they have end caps?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, rubber end caps are fitted at both ends to protect the socket and cabinet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are they made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBlack steel, which gives the strength needed to support a top speaker cabinet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need anything else to use them?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou need a bass box with a top hat fitted and a top cabinet with a matching socket.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271928602891,"sku":"180.218UK","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/180218UK_0.jpg?v=1785010452"},{"product_id":"qtx-adjustable-heavy-duty-steel-speaker-stand-60kg-load","title":"QTX Adjustable Heavy Duty Steel Speaker Stand, 60kg Load","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis QTX speaker stand gives you a solid steel base for large speakers, with a maximum load of 60kg. The 35mm diameter pole fits standard 35mm top hats, so it works with the majority of PA and monitor speakers you're likely to be using. Every metal part is built for regular handling, which is what you want from a stand that gets set up and packed down time after time.\u003c\/p\u003e\n\u003cp\u003eHeight adjusts from 0.95m up to 1.7m, with a lockable mechanism that holds the pole firmly in place once you've set it. That range covers most live and installed setups, whether you need speakers at ear height for a seated crowd or lifted higher to clear a standing audience. The all-metal construction means there are no plastic collars to wear out or crack over time. Spare parts are included, so you've got replacements to hand if anything needs swapping.\u003c\/p\u003e\n\u003cp\u003eWeighing 2.15kg and folding down to 900 x 170 x 110mm, the stand is easy to carry and store between jobs. It's a straightforward, hard-wearing choice for mobile DJs, bands and venues that need reliable support without any fuss. Note that this is a single stand, so order a pair if you're running speakers on both sides. Pop it in one of our equipment bags to keep everything together when you're on the move.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.15KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube\u003c\/td\u003e\n\u003ctd\u003e35mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. weight load\u003c\/td\u003e\n\u003ctd\u003e60.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight adjustment\u003c\/td\u003e\n\u003ctd\u003e0.95 - 1.7m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (collapsed)\u003c\/td\u003e\n\u003ctd\u003e900mm x 170mm x 110mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size pole does this stand use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pole is 35mm in diameter, which fits standard 35mm top hats found on most PA and monitor speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can it hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe maximum load is 60kg, so it comfortably supports large speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat height range does it cover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHeight adjusts from 0.95m to 1.7m, with a lockable mechanism to hold your chosen setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this sold as a single stand or a pair?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a single stand. If you need to run speakers on both sides, order two.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with any spare parts?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, spare parts are included so you have replacements to hand if needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow small does it fold down for storage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt collapses to 900 x 170 x 110mm and weighs 2.15kg, making it easy to carry and store.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271946723595,"sku":"181.181UK","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/181181UK_0.jpg?v=1785011110"},{"product_id":"qtx-adjustable-heavy-duty-speaker-stand-kit-with-carry-bag","title":"QTX Adjustable Heavy Duty Speaker Stand Kit with Carry Bag","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis QTX kit gives you two heavy duty speaker stands and a carry bag to keep them together. Each stand is made from steel with all metal parts, so they hold up to regular use on the road or at fixed installs. The 35mm diameter pole fits speakers with matching 35mm top hats, which covers most PA cabinets on the market. Lockable height adjustment lets you set the position and trust it to stay put once loaded.\u003c\/p\u003e\n\u003cp\u003eYou can adjust each stand from 0.95m up to 1.7m, giving you room to raise a speaker above head height for better coverage or drop it lower for smaller rooms. The maximum load is 60kg per stand, which is plenty for large full-range cabinets. Spare parts are included with the kit, so you have replacements to hand if anything needs swapping over time. Each stand weighs 2.15kg and folds down to 900 x 170 x 110mm when collapsed.\u003c\/p\u003e\n\u003cp\u003eThe supplied bag holds both stands for transport and storage, and keeps the poles and legs protected between gigs. Whether you call it a speaker stand or a speaker tripod, this is a straightforward two-stand set for mobile DJs, bands and venues that need a reliable way to lift speakers off the floor. With steel construction and a 60kg rating, it suits anyone putting weight on their stands and wanting them to last.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.15KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube\u003c\/td\u003e\n\u003ctd\u003e35mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. weight load\u003c\/td\u003e\n\u003ctd\u003e60.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight adjustment\u003c\/td\u003e\n\u003ctd\u003e0.95 - 1.7m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (collapsed)\u003c\/td\u003e\n\u003ctd\u003e900mm x 170mm x 110mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow many stands are included in this kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou get two speaker stands plus a carry bag to hold both for transport and storage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size speaker fitting does the pole use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach pole is 35mm in diameter, so it fits speakers with a matching 35mm top hat mount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow high do the stands extend?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach stand adjusts from 0.95m up to 1.7m with lockable height settings to keep the position secure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can each stand hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe maximum load is 60kg per stand, which suits large full-range PA cabinets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the stands easy to transport?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each stand weighs 2.15kg and folds down to 900 x 170 x 110mm, and the bag carries both together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the stands come with spare parts?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, spare parts are supplied with the kit so you have replacements ready when needed.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271946756363,"sku":"181.182UK","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/181182UK_0.jpg?v=1785011142"},{"product_id":"citronic-winch-speaker-stand-50kg-load-adjustable","title":"Citronic Winch Speaker Stand, 50Kg Load, Adjustable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Citronic winch speaker stand gives you a steady, adjustable base for speakers and PA systems. It's built from steel and aluminium with a black finish, and takes loads of up to 50Kg. The 35mm diameter pole suits most standard speaker cabinets, so it slots into a lot of existing setups without any fuss.\u003c\/p\u003e\n\u003cp\u003eThe main feature here is the rack and pinion winch mechanism. Rather than lifting the speaker by hand and hoping the pin holds, you turn the locking winch handle and raise the cabinet smoothly to the height you want. Height adjusts from 1.2m to 2m, which covers everything from small rooms to bigger crowds where you need the sound up above head level. The locking handle keeps things in place once you've set it.\u003c\/p\u003e\n\u003cp\u003eAt 4.5Kg the stand is easy enough to carry between gigs or move around a venue, but it's still solid enough to feel safe under a heavy cabinet. If you run a mobile PA rig, a band, or a fixed installation that needs occasional height changes, this is a practical choice. Winch stands take a lot of the strain out of setup, especially when you're working alone and don't want to be wrestling a speaker up a pole at the end of a long day.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight adjustment\u003c\/td\u003e\n\u003ctd\u003e1.2 - 2.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.50KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSteel \u0026amp; Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum load for this stand?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt takes up to 50Kg, which covers most speaker cabinets and PA tops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the winch mechanism work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses a rack and pinion winch. You turn the locking handle to raise or lower the speaker smoothly, then lock it at your chosen height.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat height range does it cover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe stand adjusts from 1.2m to 2m, so you can set it low for small rooms or high for larger crowds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my speakers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pole is 35mm in diameter, which matches most standard speaker cabinet sockets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow heavy is the stand itself?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt weighs 4.5Kg, so it's easy to carry and set up on your own.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSteel and aluminium, finished in black.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271946789131,"sku":"181.183UK","price":89.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/181183UK_1.jpg?v=1785011176"},{"product_id":"qtx-short-steel-speaker-stand-height-adjustable","title":"QTX Short Steel Speaker Stand | Height Adjustable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis short speaker stand from QTX is built from robust steel with lockable height adjustment, so you can set it at the level you need and know it will stay put. It works well for large speakers, and also takes lighting or effects machines fitted with 35mm diameter top hats. The compact height range makes it a sensible choice where a full-size stand would be too tall, such as on a stage riser, a raised platform or a tabletop set-up.\u003c\/p\u003e\n\u003cp\u003eThe pole measures 35mm in diameter and the stand adjusts in height from 0.8m to 1.2m. Maximum weight load is 50kg, which covers most active and passive speakers you are likely to mount on it. At 1.6kg it stays light enough to carry between jobs, and it folds down to 660mm x 120mm x 120mm when collapsed, so it packs away neatly in a car boot or gear case.\u003c\/p\u003e\n\u003cp\u003eWe think this stand suits mobile DJs, bands and hire companies who need something sturdy but short. The lockable adjustment gives you a firm, repeatable setting, and the steel build stands up to regular load-in and load-out. Pair it with a top hat adaptor and you have a straightforward way to raise a speaker, light or fogger to a useful working height without the wobble you get from cheaper stands.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.60KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. weight load\u003c\/td\u003e\n\u003ctd\u003e50.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube\u003c\/td\u003e\n\u003ctd\u003e35mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight adjustment\u003c\/td\u003e\n\u003ctd\u003e0.8m - 1.2m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (collapsed)\u003c\/td\u003e\n\u003ctd\u003e660mm x 120mm x 120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat height does this stand adjust to?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt adjusts from 0.8m to 1.2m, with lockable height settings so it holds firm once set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe maximum weight load is 50kg, which suits most large speakers, lighting units and effects machines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size pole does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pole is 35mm in diameter, which fits speakers and accessories with 35mm top hats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow small does it fold down?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen collapsed it measures 660mm x 120mm x 120mm and weighs just 1.6kg, so it is easy to store and transport.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it for lighting or effects machines?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It supports lighting and effects machines as long as they have a 35mm diameter top hat fitting.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271947280651,"sku":"181.185UK","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/181185UK_0.jpg?v=1785011210"},{"product_id":"qtx-studio-monitor-stands-50cm-pair-steel-with-floor-spikes","title":"QTX Studio Monitor Stands 50cm - Pair, Steel with Floor Spikes","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis pair of QTX studio monitor stands gives your nearfield speakers a steady base for the studio, home or a small project setup. Each stand measures 50cm tall, which sits your monitors closer to ear height when you are seated at a desk or mixing position. The stands are built from steel and finished in black, so they hold their shape under regular use and sit quietly in the background rather than drawing attention.\u003c\/p\u003e\n\u003cp\u003eStability comes from a wide 240mm x 240mm base fitted with floor spikes. The spikes bite into carpet or grip harder surfaces to keep each stand planted, reducing wobble that can affect how your monitors sound. The top plate measures 125mm x 125mm, giving your speakers a solid platform to rest on. With a maximum load of 10kg per stand, they suit small and mid-sized nearfield monitor speakers found in most home and project studios.\u003c\/p\u003e\n\u003cp\u003eYou get two stands in the pair, so both speakers are set at a matching height for a balanced listening position. The plain black steel design keeps things simple and works well alongside most desks and studio furniture. If you have been placing monitors on shelves or the desk itself, moving them onto proper stands helps you hear a cleaner stereo image. These are a straightforward, sturdy option for anyone setting up a modest monitoring space.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate dimensions\u003c\/td\u003e\n\u003ctd\u003e125mm x 125mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase : dimensions\u003c\/td\u003e\n\u003ctd\u003e240mm x 240mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow tall are the stands?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach stand stands 50cm tall, which suits a seated mixing or listening position at most desks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can each stand hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe maximum load is 10kg per stand, which covers small and mid-sized nearfield monitor speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo they work on carpet and hard floors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The floor spikes grip carpet and steady the stands on harder surfaces, so they suit all floor types.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many stands are included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThey are supplied as a pair, so you get two matching stands for both of your monitors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size is the top plate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe top plate measures 125mm x 125mm, giving your speakers a solid surface to sit on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the stands made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThey are made from steel with a black finish and sit on a 240mm x 240mm base.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271949017355,"sku":"181.191UK","price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/181191UK_0.jpg?v=1785011248"},{"product_id":"qtx-steel-studio-monitor-stands-80cm-pair","title":"QTX Steel Studio Monitor Stands 80cm - Pair","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThese QTX studio monitor stands come as a pair, giving you a sturdy base for small and mid sized nearfield monitor speakers. At 80cm tall, they lift your monitors off the desk or floor and towards ear height, which helps you hear what your speakers are actually doing. They suit studio work, home setups and smaller projects where you want a clean, stable platform without a lot of fuss.\u003c\/p\u003e\n\u003cp\u003eEach stand is built from steel with a black finish, so they stay steady and blend into most rooms. The top plate measures 125mm x 125mm and the base measures 240mm x 240mm, giving a wide footing that keeps things planted. Floor spikes are supplied to add stability and to couple the stand to the floor, which helps cut down on unwanted movement and vibration passing between the stand and the surface below.\u003c\/p\u003e\n\u003cp\u003eThe spikes make them suitable for all floor surfaces, from carpet through to hard floors. Each stand takes a maximum load of 10kg, which covers most nearfield monitors in a home or project studio. If you are new to the term, a monitor is simply a studio speaker built for accurate sound rather than added bass or brightness. Set them up either side of your listening position, level them off, and you have a solid pair of stands ready to work.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate dimensions\u003c\/td\u003e\n\u003ctd\u003e125mm x 125mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase : dimensions\u003c\/td\u003e\n\u003ctd\u003e240mm x 240mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eAre these monitor stands sold as a pair?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, they are supplied in pairs, so you get two stands ready for a left and right speaker setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow tall are the stands?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach stand is 80cm tall, which helps bring nearfield monitors closer to ear height at a seated listening position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum load per stand?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach stand takes a maximum load of 10kg, which suits most small and mid sized nearfield monitor speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use them on carpet and hard floors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The supplied floor spikes make them suitable for all floor surfaces, adding stability on both carpet and hard floors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are they made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe stands are made from steel with a black finish, giving a wide, stable base plate and footing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size are the top and base plates?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe top plate is 125mm x 125mm and the base is 240mm x 240mm.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271950655755,"sku":"181.192UK","price":44.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/181192UK_0.jpg?v=1785011287"},{"product_id":"qtx-height-adjustable-monitor-speaker-stand","title":"QTX Height Adjustable Monitor Speaker Stand","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis QTX monitor speaker stand gives you a steady base for studio monitors at home or on smaller projects. It uses a low profile triangular base, so it stays out of the way while keeping your speaker planted. Height is adjustable from 800mm to 1200mm, held in place by a locking pin, which lets you set each monitor to the right level for your listening position.\u003c\/p\u003e\n\u003cp\u003eThe stand is built from steel with a black powder coated 35mm tube, so it holds up to regular use and takes a maximum load of 40kg. At the top sits a steel tray measuring 230 x 230mm, fitted with isolating foam rests. The foam helps reduce vibration passing between the speaker and the stand, which keeps the sound cleaner. At the base you get rubber feet for hard floors and levelling floor spikes for carpet, so you can set up on either surface.\u003c\/p\u003e\n\u003cp\u003eThe footprint measures 450 x 450mm and the whole stand weighs 3.15kg, so it is easy enough to move around the room when you need to. It is a practical choice for anyone setting up a home studio or a small production space who wants their monitors at ear height and held firmly in place. Buy a pair to match your left and right monitors.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e800mm-1200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. weight load\u003c\/td\u003e\n\u003ctd\u003e40.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate dimensions\u003c\/td\u003e\n\u003ctd\u003e230mm x 230mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.15KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFootprint\u003c\/td\u003e\n\u003ctd\u003e450 x 450mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat height does the stand adjust between?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt adjusts from 800mm to 1200mm and locks in place with a pin, so you can set your monitor at the right level for your seating position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can it hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe maximum load is 40kg, which covers most studio monitors and bookshelf speakers used on stands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work on both carpet and hard floors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It comes with rubber feet for hard floors and levelling floor spikes for carpet, so you can set it up on either surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it help reduce vibration?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe steel top tray has isolating foam rests, which help cut vibration passing between the speaker and the stand for cleaner sound.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the tray and base dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe top plate measures 230 x 230mm and the base footprint is 450 x 450mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this sold as a single stand or a pair?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is for one stand. If you want matching left and right monitors, buy two.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271950688523,"sku":"181.193UK","price":25.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/181193UK_0.jpg?v=1785011323"},{"product_id":"qtx-35mm-stand-top-cap-with-locking-bolt","title":"QTX 35mm Stand Top Cap with Locking Bolt","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eWe made this 35mm stand top cap to give your 35mm speaker stands a bit more purpose. Instead of holding only a speaker, the cap lets the stand support lights and effects machines too, so you can get more use from the gear you already own. It fits onto the top of a standard 35mm pole and gives you a solid mounting point to work from.\u003c\/p\u003e\n\u003cp\u003eThe cap has a rugged, machined steel construction, so it holds up well to regular handling and the weight of what you put on it. It comes supplied with a locking bolt, a top bolt and washers, meaning you have everything needed to fit it and hold your load in place. The locking bolt keeps the fitting secure once you have set the height, and the machined finish means the parts sit together cleanly.\u003c\/p\u003e\n\u003cp\u003eAt 340g the cap is heavy enough to feel dependable without adding much bulk to your kit. The 35mm pole diameter matches common 35mm speaker stands (also called poles or subwoofer poles in some setups), so it slots straight into place. If you run mobile disco, band or event gear and want your stands to double up for lighting and effects, this is a simple, practical addition to keep in your bag.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.34KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePole diameter\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eBrackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat pole size does this cap fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is made for 35mm speaker stands, matching the standard 35mm pole diameter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a rugged, machined steel construction for regular use and load handling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is supplied in the box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou get the cap along with a locking bolt, a top bolt and washers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it hold lights and effects machines?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it lets 35mm speaker stands support lights and effects machines as well as speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much does the cap weigh?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt weighs 340g, so it is solid without adding much bulk to your kit.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272096211211,"sku":"853.243UK","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/853243UK_0.jpg?v=1785046534"}],"url":"https:\/\/niori.co.uk\/collections\/speaker-stands-mounts.oembed","provider":"Niori","version":"1.0","type":"link"}