{"title":"Smart Lighting","description":"\u003cp\u003eControl your rooms from a phone or remote with this smart lighting range. It brings together a colour-changing, variable-white GLS bulb, plus flush ceiling lights with CCT and RGB remote control. mmWave occupancy sensors and a DALI dimmable emergency kit round it out, so you can tune brightness, colour and timing to suit each space at home or work.\u003c\/p\u003e","products":[{"product_id":"5w-e14-led-rgb-cct-smart-candle-bulb-wi-fi-dimmable","title":"5W E14 LED RGB \u0026 CCT Smart Candle Bulb - Wi-Fi Dimmable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge CL5KW is a 5W E14 LED smart candle bulb offering full RGB colour control and adjustable colour temperature from warm 2700K to cool 6500K white light. The bulb connects via Wi-Fi (2.4GHz IEEE 802.11 b\/g\/n) and is controlled through the SmartKnight mobile app, allowing remote on\/off, dimming, colour selection, and scheduling from anywhere with internet access. The frosted polycarbonate candle shell measures 38mm diameter by 112mm height and outputs 440 lumens at full brightness.\u003c\/p\u003e\n\u003cp\u003eDesigned for decorative fittings with small Edison screw (SES\/E14) sockets including chandeliers, wall lights, table lamps and candelabra fittings, the bulb can be grouped with up to 100 other Knightsbridge smart fittings to create zones and scenes controlled together. Voice control is supported via Amazon Alexa and Google Assistant, and the app allows scheduling to automate on\/off times throughout the day. The bulb retains manual override at the physical wall switch, so it can be turned on\/off conventionally when needed.\u003c\/p\u003e\n\u003cp\u003eThe RGB mode delivers saturated colour across the full spectrum, while the CCT mode provides adjustable white light from warm candlelight tones to bright daylight for task lighting. Dimming is stepless via the app with no additional hardware required. The bulb requires a 2.4GHz Wi-Fi connection during setup — dual-band routers may need the 5GHz band temporarily disabled during pairing, then re-enabled once the bulb is connected. The polycarbonate construction carries an IP20 rating for indoor dry locations only and a 2-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e38 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e112 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eFrosted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eE14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700-6500 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eRGB+CCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e440 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e91.3 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi + BLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3811645_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1187896.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with standard dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The bulb is dimmable via the SmartKnight app only and does not require or work with traditional wall-mounted dimmer switches. It operates on a standard on\/off switch, with all dimming and colour control handled through the app.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fittings is it suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe E14 (small Edison screw) base fits chandeliers, wall lights, table lamps and decorative fittings designed for candle bulbs. The 38mm diameter and 112mm height are typical for E14 candle bulbs, but check your fitting's dimensions if space is tight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I control multiple bulbs together?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The SmartKnight app allows grouping of up to 100 Knightsbridge smart fittings or bulbs to create zones that can be controlled simultaneously. Scenes can be saved to recall specific colour and brightness combinations across grouped bulbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a hub or bridge?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The bulb connects directly to your Wi-Fi network (2.4GHz only) without requiring a separate hub or bridge. If you have a dual-band router, you may need to temporarily disable the 5GHz band during initial setup, then re-enable it once the bulb is paired.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293551812875,"sku":"CL5KW","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/680566_968ad780-8d1b-4aa5-a6f4-2815340fd132.jpg?v=1714660176"},{"product_id":"9w-led-bulkhead-with-microwave-sensor-white-ip65-cct-adjustable","title":"9W LED Bulkhead With Microwave Sensor - White IP65 CCT Adjustable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge BT9ACTS is a 9W LED bulkhead with an integrated microwave sensor, built into a white polycarbonate housing rated IP65 for outdoor and wet-location use. The CCT function allows the colour temperature to be switched between 3000K warm white (730lm), 4000K neutral white (810lm), and 5700K cool daylight (780lm) via a selector switch on the rear of the fitting, so the light temperature can be adjusted to match the environment without changing the bulkhead itself.\u003c\/p\u003e\n\u003cp\u003eDesigned for wall and ceiling mounting on building exteriors, car parks, stairwells, corridors, storage areas and commercial premises, the microwave sensor detects motion up to several metres and automatically switches the light on when movement is detected, then off after a set hold time. The sensor's detection range, lux threshold (daylight sensitivity) and hold time are all adjustable via controls on the rear of the unit, allowing the bulkhead to be configured for different mounting heights and traffic patterns. The IP65 rating protects the internals from rain and dust ingress, making the fitting suitable for fully exposed outdoor positions.\u003c\/p\u003e\n\u003cp\u003eThe 256mm diameter white polycarbonate body houses an opal diffuser that spreads light across a 115-degree beam angle, minimising glare while providing wide coverage for pathways and doorways. The hinged LED gear tray allows access to the wiring terminal block and sensor controls without needing to fully remove the bulkhead from the wall. The Class II double-insulated construction means no earth connection is required, simplifying installation. The SMD LED array carries a 50,000-hour L70B50 rating (50,000 hours to 70% initial output) and a 5-year manufacturer warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e74 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/5700 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e730 \/ 810 \/ 780 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e900 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e118.41 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4134218_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the CCT adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA selector switch on the rear of the bulkhead allows you to choose between 3000K warm white, 4000K neutral white, or 5700K cool daylight. The setting is changed by opening the hinged gear tray and flipping the switch before closing the unit again.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the microwave sensor configured?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThree controls on the rear of the unit adjust detection range, lux threshold (the ambient light level below which the sensor activates), and hold time (how long the light stays on after detecting movement). These can be set to match the mounting height and the specific application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used outdoors in rain?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating protects the internals from rain and dust, making the bulkhead suitable for fully exposed outdoor positions including building exteriors, covered walkways, and car parks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need an earth connection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The bulkhead is Class II double-insulated, so it only requires live and neutral connections. This simplifies wiring in older buildings or surface-mounted conduit installations where an earth may not be readily available.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293590872331,"sku":"BT9ACTS","price":35.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/505512_34b2e860-5a42-4a5d-aa05-130c0e18c60f.jpg?v=1714660882"},{"product_id":"9w-outdoor-cct-led-bulkhead-emergency-microwave-sensor-ip65","title":"9W Outdoor CCT LED Bulkhead - Emergency \u0026 Microwave Sensor - IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge BT9ACTEMS is a 9W LED bulkhead fitting with CCT switching between 3000K, 4000K and 5700K, integrated 3-hour maintained emergency backup, and an adjustable microwave sensor that triggers the light when motion is detected. The IP65 polycarbonate housing suits both wall and ceiling mounting in internal or external installations where lighting automation, emergency illumination and weather resistance are all required.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial corridors, stairwells, loading bays, car parks, storage areas and external walkways where lights need to activate automatically and provide emergency backup during mains failure, the bulkhead combines three functions in one fitting: presence-triggered switching via the microwave sensor, colour temperature selection via a recessed switch on the gear tray, and emergency operation that maintains illumination at 190lm for three hours when the mains supply is interrupted. The sensor detection range, lux threshold and hold time are all adjustable via potentiometers accessed when the hinged gear tray is opened.\u003c\/p\u003e\n\u003cp\u003eThe 256mm circular polycarbonate body mounts flush to the wall or ceiling with 74mm projection and conceals a hinged LED gear tray, accessible without fully removing the fitting. The opal polycarbonate diffuser gives a wide 115° beam angle, distributing light evenly across circulation spaces. The CCT switch allows the colour temperature to be changed post-installation: 3000K warm white outputs 730lm, 4000K neutral white outputs 810lm, and 5700K cool white outputs 780lm. The SMD LED source has a rated L70B50 life of 50,000 hours and a CRI \u0026gt;80. Push-fit fast-fix terminal blocks simplify first-time wiring and maintenance access.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e74 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEmergency\u003c\/td\u003e\n\u003ctd\u003eMaintained \/ Non-maintained \/ Switched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/5700 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e730 \/ 810 \/ 780 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e900 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Em. mode)\u003c\/td\u003e\n\u003ctd\u003e190 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e118.41 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty Information\u003c\/td\u003e\n\u003ctd\u003e(excluding battery)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4134449_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the emergency function do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integrated emergency module maintains illumination at 190lm for three hours when the mains supply fails. It operates in maintained mode (always lit when mains is present, then switches to battery during outage), non-maintained mode (only lit during outage), or switched mode (controlled by a light switch normally, then auto-lit during outage). The emergency battery recharges from the mains when supply is restored.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the microwave sensor work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe microwave sensor detects movement within its range and triggers the light to switch on. Detection range, lux threshold (the ambient light level below which the sensor will activate) and hold time (how long the light stays on after last detecting movement) are all adjustable via potentiometers on the gear tray. This allows the sensor to be tuned to the specific installation environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the colour temperature be changed after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. A recessed CCT switch on the hinged gear tray allows the colour temperature to be changed between 3000K warm white, 4000K neutral white, and 5700K cool white without re-wiring. Each setting produces a different lumen output: 730lm at 3000K, 810lm at 4000K, 780lm at 5700K.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for external installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating provides protection against dust ingress and water jets from any direction, making the bulkhead suitable for external wall or soffit mounting in sheltered or exposed locations. The polycarbonate construction resists impact and UV degradation.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293591003403,"sku":"BT9ACTEMS","price":53.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/505788_89231f51-cdbe-4c7f-a1b1-1fe916941a56.jpg?v=1714660885"},{"product_id":"14w-outdoor-cct-led-bulkhead-with-microwave-sensor-ip65-white","title":"14W Outdoor CCT LED Bulkhead With Microwave Sensor - IP65 White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge BT14ACTS is a 14W LED bulkhead with an integrated microwave sensor and adjustable colour temperature, rated IP65 for outdoor and bathroom use. The 315mm diameter white polycarbonate housing contains an SMD LED array behind an opal diffuser, delivering 1130-1260 lumens depending on the CCT setting selected. The colour temperature adjusts between 3000K warm white, 4000K neutral white and 5700K daylight via a switch on the LED gear tray.\u003c\/p\u003e\n\u003cp\u003eDesigned for wall or ceiling mounting on external walls, garage entrances, rear gardens, communal stairwells and bathroom ceilings where sensor control is needed. The microwave sensor detects movement through the polycarbonate housing with adjustable detection range, lux threshold and hold time, allowing the light to switch on only when motion is detected and ambient light falls below the set level. The hinged gear tray and push-fit terminal block allow access to wiring and sensor adjustments without removing the entire fitting from the wall.\u003c\/p\u003e\n\u003cp\u003eThe white polycarbonate construction combines impact resistance with UV stability for outdoor installation in exposed positions. The IP65 rating protects the internals against water jets from any direction, making the bulkhead suitable for soffit mounting under eaves, on external walls facing prevailing rain, or in bathrooms as ceiling lighting with sensor control. The Class II double-insulated construction requires no earth connection. The LED array carries a 50,000-hour L70B50 rating and a 5-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e315 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e74 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/5700 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1130 \/ 1260 \/ 1210 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1340 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e109.9 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4134873_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1187096.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CCT selector switch is located on the LED gear tray inside the bulkhead. After isolating the power, remove the diffuser by releasing the clips or screws, then slide the switch to choose between 3000K warm white, 4000K neutral white or 5700K daylight. Reassemble the diffuser and restore power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I adjust the sensor settings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe microwave sensor has three adjustable controls on the gear tray: detection range (how far the sensor reaches), lux threshold (the ambient light level below which the sensor activates) and hold time (how long the light stays on after detecting movement). Access the controls by removing the diffuser with the power isolated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating allows installation in bathroom zones 1 and 2 (above the bath or shower enclosure) as a ceiling-mounted light with sensor control. Ensure a suitable cable entry gland is used to maintain the IP rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat detection range does the microwave sensor offer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe sensor typically detects movement within a 6-8m radius when set to maximum range, though this is adjustable. Microwave sensors detect through the polycarbonate housing and can sense movement through non-metallic walls, so positioning away from adjacent rooms or paths may be needed to avoid false triggering.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293591462155,"sku":"BT14ACTS","price":35.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/506474_6ba347b5-9df7-4138-be97-7914770afbe3.jpg?v=1714660891"},{"product_id":"20w-led-bulkhead-ip65-cct-adjustable-with-microwave-sensor-white","title":"20W LED Bulkhead IP65 CCT Adjustable With Microwave Sensor - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge BT20ACTS is a 20W LED bulkhead with an integrated microwave sensor, a 380mm diameter white polycarbonate body, and IP65 weatherproofing for both indoor and outdoor installation. The luminaire delivers between 1730lm and 1930lm depending on the selected colour temperature, with CCT switching between 3000K warm white, 4000K neutral white, and 5700K cool white set via a switch on the driver.\u003c\/p\u003e\n\u003cp\u003eDesigned for ceiling and wall mounting in commercial, residential and industrial settings, the bulkhead suits external entrances, covered walkways, storage areas, loading bays, corridors, stairwells and car parks where automated motion-activated lighting reduces energy waste. The microwave sensor detects movement through the polycarbonate diffuser and activates the LED, with adjustable detection range, lux threshold, and hold time set via three control dials inside the luminaire. The IP65 rating protects against dust ingress and low-pressure water jets from any direction.\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate body and opal diffuser combine impact resistance with wide 115° beam distribution, giving even coverage across large wall and floor areas without harsh shadows. The hinged LED gear tray opens for maintenance access without removing the luminaire from the wall or ceiling, and the push-fit terminal block accepts standard twin-and-earth mains cable without screw terminals. At 81mm projection, the low-profile design sits close to the mounting surface. The 50,000-hour L70B50 rating and 5-year warranty reflect commercial-grade construction.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e380 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e81 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/5700 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1730 \/ 1930 \/ 1855 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e2190 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e125.7 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4135046_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CCT is adjusted via a switch on the LED driver inside the luminaire. Remove the diffuser to access the driver, set the switch to 3000K, 4000K, or 5700K as required, then refit the diffuser. The setting is retained until manually changed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you adjust the sensor settings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThree control dials inside the luminaire adjust detection range, lux threshold (ambient light level at which the sensor activates), and hold time (how long the light stays on after detecting movement). Access these by opening the hinged gear tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be installed outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating protects against dust and water jets, making it suitable for external walls, soffits, covered porches, and sheltered outdoor areas. It should not be installed fully exposed to driving rain without overhead protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for emergency lighting circuits?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis model (BT20ACTS) is a standard sensor version without emergency battery backup. Knightsbridge produces separate emergency versions in the same bulkhead range — contact us if emergency compliance is required for your installation.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293592674571,"sku":"BT20ACTS","price":58.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/506834_ef2b2b8c-ef0e-4822-be70-2b7b2f112cdf.jpg?v=1714660906"},{"product_id":"9w-b22-led-rgb-cct-smart-gls-bulb-dimmable","title":"9W B22 LED RGB \u0026 CCT Smart GLS Bulb - Dimmable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 9W B22 LED smart bulb combines RGB colour control with adjustable white light from 2700K warm white to 6500K cool daylight, controlled via the SmartKnight Wi-Fi app. The B22 bayonet cap fits standard UK ceiling and lamp fittings, and the GLS (general lighting service) A60 shape matches the traditional light bulb profile at 60mm diameter by 118mm height.\u003c\/p\u003e\n\u003cp\u003eDesigned for table lamps, ceiling pendants and any B22 fitting where remote control and colour flexibility are wanted, the bulb connects to home Wi-Fi (2.4GHz only) and integrates with Amazon Alexa and Google Assistant for voice commands. The app allows dimming from 1-100%, scheduling on\/off times, grouping multiple bulbs into zones, and switching between RGB colours and the full CCT white spectrum without needing a separate dimmer switch or control panel.\u003c\/p\u003e\n\u003cp\u003eThe frosted polycarbonate diffuser gives even light distribution across the 900 lumen output, with a colour rendering index above 85 for accurate colour appearance in both white and RGB modes. The bulb can be overridden by the physical light switch without losing its Wi-Fi connection or programmed settings, and multiple family members can control the same bulb simultaneously through the shared app access. Maximum 100 bulbs can be grouped together across zones and scenes.\u003c\/p\u003e\n\u003cp\u003eThe 9W LED consumes significantly less energy than a 60W incandescent equivalent while producing the same 900 lumens. The bulb carries a 2-year warranty and an IP20 rating for indoor dry location use only.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e118 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eFrosted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eB22d\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700-6500 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eRGB+CCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e900 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e97.6 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi + BLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4241807_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this bulb require a hub or bridge?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The bulb connects directly to home Wi-Fi (2.4GHz only) via the SmartKnight app. If you have a dual-band router, you may need to temporarily disable the 5GHz band during initial setup, then re-enable it once the bulb is paired.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I still use the physical light switch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The bulb can be turned on and off at the wall switch without losing Wi-Fi connectivity or programmed settings. When switched back on, it returns to the last setting used in the app.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs dimming smooth or stepped?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming is controlled through the SmartKnight app from 1-100% and is smooth rather than stepped. There is no physical dimmer switch compatibility — all control happens via the app or voice commands through Alexa or Google Assistant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the actual brightness compared to an old incandescent bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis 9W LED outputs 900 lumens, roughly equivalent to a traditional 60W incandescent bulb. The frosted diffuser spreads the light evenly, making it suitable for general room lighting in table lamps, pendants and ceiling fittings.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293600014603,"sku":"GLS9BCKW","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/680554_f4785baa-b40f-411d-b97c-18ac88b9a41e.jpg?v=1714661013"},{"product_id":"12v-24v-led-flex-strip-to-strip-connector-rgb-cct-10mm","title":"12V\/24V LED Flex Strip-to-Strip Connector - RGB\/CCT 10mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LFCON4FX is a strip-to-strip connector designed for joining 10mm RGB or CCT LED flex strips without soldering. The connector uses a snap-fit polycarbonate housing with a 150mm cable bridge between two terminal blocks, each accepting one LED strip end. Once clicked in place, the connector maintains electrical continuity for power and data signals, enabling RGB colour sequences or CCT tunable-white transitions to run uninterrupted across multiple strip sections.\u003c\/p\u003e\n\u003cp\u003eDesigned for architectural lighting installations, under-cabinet runs, cove lighting and display lighting where multiple LED strip reels need to be joined mid-run, the connector handles both 12V and 24V DC supplies. The IP20 rating suits dry indoor locations only — it is not rated for bathrooms, outdoor use or contact with moisture. The black polycarbonate shell measures 14mm wide and 7mm in profile, allowing it to sit flush against most ceiling or cabinet recesses without visible projection.\u003c\/p\u003e\n\u003cp\u003eThe snap-fit terminal blocks grip the copper pads on the end of each LED strip section, eliminating the need for screw terminals or soldered joints. This means a strip-to-strip joint can be assembled on-site in under 60 seconds once the strip ends are cut and prepared. The 150mm cable length provides enough slack to route the connector behind a trim piece or inside a channel without tension on the strip ends.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e190 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626301_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat LED strips is this compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is designed for 10mm wide RGB or CCT LED flex strips operating on 12V or 24V DC. It fits Knightsbridge's LFC24xx series and other 10mm strips with matching copper pad layouts. Confirm pad alignment before ordering if using third-party strips.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors or in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the connector is only suitable for dry indoor locations. It is not rated for contact with moisture, steam or outdoor weather exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require soldering?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connector uses a snap-fit terminal block design that grips the copper pads on each LED strip end without soldering, screw terminals or additional tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable length between the two connectors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable bridge measures 150mm between the two terminal blocks, providing enough slack to route the connector behind trim or inside an aluminium channel without tension on the strip ends.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293624590603,"sku":"LFCON4FX","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/807696_0633073e-028d-4a16-8251-fc8a6a66b335.jpg?v=1714661318"},{"product_id":"outdoor-single-wall-light-with-photocell-sensor-anthracite","title":"Outdoor Single Wall Light With Photocell Sensor - Anthracite","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge OWALL1AP is a compact outdoor wall light with an integrated photocell sensor that switches the light on automatically at dusk and off at dawn. The cylindrical 201 stainless steel body is powder-coated in anthracite, with a downward-facing GU10 lamp holder behind a clear diffuser. The IP54 rating protects against dust ingress and water splashing from any direction.\u003c\/p\u003e\n\u003cp\u003eDesigned for domestic and commercial exterior lighting, the fitting suits entrance porches, garage sides, pathway walls, courtyard perimeters and building corners where automatic lighting is needed without manual switches or timers. The 60mm diameter and 120mm height give a low-profile presence that works on narrower wall surfaces, while the 96mm projection keeps the fitting close to the wall plane. The photocell sensor eliminates the need to remember to switch on security or welcome lighting after dark.\u003c\/p\u003e\n\u003cp\u003eThe anthracite powder coat over 201 stainless steel provides corrosion resistance in coastal and high-humidity locations. The clear diffuser directs most light downwards onto the ground immediately below the fitting, with minimal upward light spill. The fitting accepts any GU10 halogen or LED bulb up to 20W (sold separately), giving flexibility to choose warm white (2700K-3000K) for domestic entrances or cool white (4000K-5000K) for commercial pathways and car parks.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e96 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e201 Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnthracite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4660542_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_856722.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the photocell sensor work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integrated photocell detects ambient light levels and switches the lamp on automatically when daylight falls below a threshold (typically at dusk) and off when daylight returns (dawn). No manual switching or timer programming is required. The sensor sensitivity is factory-set and cannot be adjusted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat IP rating does it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP54. This means the fitting is protected against dust ingress and water splashing from any direction, making it suitable for sheltered outdoor locations such as porches, eaves and covered pathways. It is not suitable for direct submersion or high-pressure water jets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb should I use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes a GU10 bulb up to 20W (sold separately). Most users pair this with a 5-7W GU10 LED in warm white (2700K-3000K) for domestic entrances or cool white (4000K) for commercial pathways. Halogen GU10 bulbs are also compatible but draw more power and generate more heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be installed in coastal locations?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 201 stainless steel construction with anthracite powder coating provides corrosion resistance suitable for coastal and high-humidity environments. Regular rinsing with fresh water will extend the finish life in salt-spray zones.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293628948747,"sku":"OWALL1AP","price":33.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1004812_1e8e677c-3ac8-4f5a-80ca-c5700982ac21.jpg?v=1714661375"},{"product_id":"12v-24v-rf-touch-controller-remote-rgbw-led-strip","title":"12V\/24V RF Touch Controller \u0026 Remote - RGBW LED Strip","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LEDFRA6 is a wireless RF controller and touch remote for RGBW LED strip lighting, operating on 12V or 24V DC systems. The controller handles up to 288W on 12V installations or 576W on 24V installations, enough to drive approximately 5 metres of high-density RGBW strip at 12V or 10 metres at 24V depending on strip wattage per metre. The wireless RF signal operates up to 30 metres line-of-sight between the remote and controller.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and retail LED strip installations where colour-changing or tuneable white lighting is needed without wired wall controls, the system allows users to select from the full RGBW colour spectrum via the touch remote's colour wheel interface. The remote includes brightness control, dynamic mode selection, and speed adjustment for colour-changing effects. The controller unit sits between the power supply and the LED strip, typically concealed in a ceiling void, under-cabinet space or behind furniture.\u003c\/p\u003e\n\u003cp\u003eThe controller measures 85mm x 45mm x 23mm in a white polycarbonate housing rated IP20 for dry indoor use only. Four output terminals on the controller connect to the RGBW strip's four channels (red, green, blue, white), while input terminals connect to the 12V or 24V DC power supply. The touch remote requires two AAA batteries (not included) and features a colour wheel printed on the faceplate with capacitive touch zones for brightness, mode and speed control below the wheel.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e23 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4722526_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1187046.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length of RGBW LED strip can this controller handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 12V the controller supports up to 288W, which typically allows 4-5 metres of high-density RGBW strip (around 60W per metre). At 24V the controller supports up to 576W, allowing approximately 10 metres of the same strip density. Always check your specific strip's wattage per metre and calculate total run length accordingly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the remote need line-of-sight to the controller?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The RF signal operates through walls, ceilings and furniture within a 30-metre range. This differs from infrared remotes which require direct line-of-sight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple controllers be paired to one remote?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe product manual details pairing procedures. Typically RF remotes can control multiple zones if the controllers are set to the same channel, but consult the manual linked above for specific instructions on multi-zone setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the controller suitable for outdoor LED strip installations?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The controller is rated IP20 for dry indoor use only. For outdoor or bathroom installations you need an IP65 or IP67 rated controller designed for damp or wet environments.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293641531659,"sku":"LEDFRA6","price":28.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/975060_1b5f9661-16ab-4338-ba59-2aae4ae8182e.jpg?v=1714661648"},{"product_id":"tenax-10-20w-cct-led-gear-tray-with-microwave-sensor","title":"TENAX 10-20W CCT LED Gear Tray With Microwave Sensor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge TENAX is a 235mm square LED gear tray with adjustable wattage (10W, 15W or 20W), colour temperature selection (3000K, 4000K or 5700K) and an integrated microwave sensor that detects movement up to several metres. A single aluminium PCB board carries all the SMD LEDs, driver electronics and sensor circuitry, reducing the number of discrete components that can fail and simplifying stock management when a single tray covers three wattages and three colour temperatures.\u003c\/p\u003e\n\u003cp\u003eThe gear tray is designed to retrofit into Knightsbridge TENAX One and TENAX Quad bulkhead casings (sold separately) using four butterfly clips that engage with the casing rim, plus a push-fit terminal block that eliminates screwdriver termination. The microwave sensor can be adjusted for detection area, daylight threshold and hold time via three rotary dials on the back of the tray, allowing the installer to tune sensitivity for corridors, stairwells, plant rooms and utility spaces where automatic lighting reduces running costs.\u003c\/p\u003e\n\u003cp\u003eThe aluminium substrate dissipates heat across the full 235mm square surface, which improves LED lifespan — the tray is rated for L70B50 at 40,000 hours, meaning 70% of the original lumen output remains after 40,000 hours of operation. The constant-current driver maintains stable output across the full mains voltage range. Luminous efficacy ranges from 141 lm\/W at 20W up to 151 lm\/W at 10W, with CRI \u0026gt;85 across all colour temperatures. The IP20 rating suits dry indoor environments only.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e235 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e235 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e28 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e40000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/5700 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1360\/1480\/1405, 1905\/2090\/1960, 2345\/2630\/2415 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e10\/15\/20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e151\/147\/141 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5564038_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I adjust the wattage and colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe gear tray has two sets of DIP switches or jumpers on the rear that allow wattage selection between 10W, 15W and 20W, and colour temperature selection between 3000K, 4000K and 5700K. These are set during installation before the tray is clipped into the casing. The lumen output varies depending on the combination selected — see the Specification table for exact figures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat casing does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe TENAX gear tray is compatible with Knightsbridge TENAX One and TENAX Quad bulkhead casings. The casing is not included with the gear tray and must be purchased separately. The tray secures via four butterfly clips and a push-fit terminal block.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the microwave sensor work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integrated microwave sensor detects movement through non-metallic materials (plasterboard, wood, plastic diffusers) and can be tuned for detection range, daylight threshold and hold time via three rotary dials on the back of the tray. This allows you to configure the sensor to turn the light on only when motion is detected and ambient daylight is below a set level, then hold the light on for a specified period after the last motion event.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathrooms or outdoor canopies?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the gear tray is suitable for dry indoor environments only. For damp environments, outdoor canopies or zones requiring IP44 or higher, you will need a different product with appropriate ingress protection.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293683081483,"sku":"TNXTMW","price":30.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1347678_5a328a00-eadd-4185-8b78-52566757496a.jpg?v=1714662510"},{"product_id":"microwave-sensor-for-pothb-high-bay-range","title":"Microwave Sensor for POTHB High Bay Range","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe POTHBMS is a plug-in microwave sensor designed for use with the Knightsbridge POTHB high bay LED range. The sensor detects movement within its coverage zone and automatically switches the high bay on or off, or dims it to a standby level when no movement is detected. The sensor fits into the base of compatible POTHB high bay fittings via a plug-in connector, requiring no additional wiring.\u003c\/p\u003e\n\u003cp\u003eDesigned for warehouses, workshops, retail stockrooms and industrial spaces where occupancy-based lighting control reduces energy waste, the sensor is fully programmable via the POTHBRC remote control (sold separately). Six parameters can be adjusted: brightness level (10-100%), sensitivity (to fine-tune detection range), hold-time (how long the light stays on after movement stops), daylight threshold (to prevent triggering in naturally-lit conditions), standby dimming level (the reduced brightness when the space is unoccupied), and standby timer (how long before dimming activates).\u003c\/p\u003e\n\u003cp\u003eThe sensor ships with default settings that allow immediate use without programming: 100% brightness, 100% sensitivity, 1-minute hold-time, daylight threshold disabled, 20% standby dimming, and 1-minute standby timer. These defaults suit most high-bay installations where quick activation and full brightness are needed. The polycarbonate housing carries an IP65 rating, making the sensor suitable for dusty or damp industrial environments. The Class II construction means no earth connection is required.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e38 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e21 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5670526_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs the POTHBRC remote control required to use this sensor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The sensor works immediately out of the box with default settings: 100% brightness, 100% sensitivity, 1-minute hold-time, daylight threshold disabled, 20% standby dimming, and 1-minute standby timer. The POTHBRC remote (sold separately) is only needed if you want to adjust these parameters to suit specific occupancy patterns or energy-saving requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich POTHB high bay models is this sensor compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe POTHBMS is designed for the Knightsbridge POTHB high bay LED range. It connects via a plug-in socket on the fitting, so compatibility depends on the specific POTHB model having the sensor port. Check the POTHB high bay product page or contact us to confirm compatibility with your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat detection range does the microwave sensor provide?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMicrowave sensors typically provide a 360-degree detection pattern with a range of 8-12 metres depending on mounting height and sensitivity setting. The sensitivity parameter can be reduced via the POTHBRC remote to narrow the detection zone and prevent false triggering from movement outside the controlled area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the sensor be used in damp or dusty environments?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The polycarbonate housing carries an IP65 rating, providing protection against dust ingress and low-pressure water jets. This makes it suitable for warehouses, workshops and other industrial spaces where dust or occasional moisture are present.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293684883723,"sku":"POTHBMS","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1414160_30084623-979e-41b3-887d-a762da8ee5c2.jpg?v=1714662560"},{"product_id":"dali-control-module-for-pothb-high-bay-range","title":"DALI Control Module For POTHB High Bay Range","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge DALI control module is a 30mm diameter by 111mm polycarbonate accessory that adds addressable DALI control to POTHB high bay LED fixtures. The module connects in-line between the mains supply and the high bay driver, allowing the fixture to be assigned a unique address and control group within a DALI lighting control system.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial and industrial installations requiring centralised lighting management, the DALI module enables individual fixtures or groups of fixtures to be controlled from a single interface. This allows warehouses, factories, retail units and distribution centres to organise high bay lighting into zones corresponding to working areas, aisles, loading bays or storage sections. Each zone can be dimmed, switched or scheduled independently without rewiring.\u003c\/p\u003e\n\u003cp\u003eThe module integrates with third-party building energy management systems (BEMS) through standard DALI protocols, providing data logging, occupancy-based control and energy monitoring at fixture level. The polycarbonate housing is IP20 rated and mounts inside the high bay canopy or between the fixture and ceiling rose depending on the specific POTHB model. The 111mm length accommodates the internal DALI driver circuitry and terminal block for incoming mains and outgoing fixture connections.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e111 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5680061_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is DALI control?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDALI (Digital Addressable Lighting Interface) is a two-wire protocol that allows each fixture in a lighting installation to be individually addressed and controlled. Unlike traditional switching, DALI enables dimming, scheduling and grouping of fixtures without additional control wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich POTHB high bay models does this module fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module is designed for the Knightsbridge POTHB high bay LED range. Check the specification sheet or contact us to confirm compatibility with your specific POTHB model before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require special wiring?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module connects in-line between the mains supply and the high bay driver using standard electrical terminations. A separate two-core DALI bus cable (not included) runs between modules to connect them to the central DALI controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be retrofitted to existing POTHB fixtures?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided the fixture is accessible and the canopy has sufficient internal space to accommodate the 30mm diameter by 111mm module. Retrofitting requires isolating the mains supply and accessing the fixture wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293685047563,"sku":"POTHBDALI","price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1413288_29c7171f-2bfc-4891-859a-3bbbe302459f.jpg?v=1714662564"},{"product_id":"45w-adjustable-constant-current-dali2-driver","title":"45W Adjustable Constant Current DALI2 Driver","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 45W constant current LED driver delivers adjustable output between 350mA and 1050mA, selectable via DIP switches on the driver housing. The driver integrates DALI2 digital dimming protocol, allowing control via DALI networks in commercial and multi-zone residential installations, with a fallback switch-dim function for non-networked applications.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial LED luminaires in office, retail and hospitality settings, the driver ships with a quick connector that pairs directly with Knightsbridge's commercial panel lights, downlights and linear fittings. The constant current output maintains consistent brightness across the LED array regardless of mains voltage fluctuation, while the 25-70VDC output range accommodates different LED configurations without needing separate driver models for each current rating.\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate housing measures 135mm x 72mm x 24mm and carries an IP20 rating, suitable for above-ceiling installation in dry indoor environments. Built-in protection against open circuit, short circuit and overload conditions prevents damage to the driver or connected LEDs in fault scenarios. The Class II double-insulated construction requires no earth connection, simplifying installation in retrofit applications where earthing may be unavailable or difficult to access.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e135 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e24 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6436777_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1870816.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the output current adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver has DIP switches on the housing that select between seven fixed current outputs: 350mA, 500mA, 600mA, 700mA, 800mA, 900mA and 1050mA. The setting is changed before installation by moving the switches to the required position according to the markings on the driver label.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does DALI2 compatibility mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDALI2 is a digital lighting control protocol that allows the driver to be networked with other DALI devices on a two-wire control bus, enabling dimming, scene setting and group control from a central controller or wall panel. The driver also supports switch-dim, which allows basic dimming via repeated mains power interruptions if DALI control is not available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used with any LED fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver is designed for use with Knightsbridge commercial LED luminaires and ships with a quick connector that pairs directly with those fittings. It can be used with other constant current LED arrays if the current requirement matches one of the seven selectable outputs and the voltage falls within the 25-70VDC output range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does Class II mean for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClass II double insulation means the driver does not require an earth connection. This simplifies installation in older buildings or retrofit scenarios where earthing may not be readily available, though mains live and neutral connections are still required.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293731119371,"sku":"1050DALI45W","price":34.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1788612_f29004fe-4432-45b7-9c66-6366a268d34b.jpg?v=1714663387"},{"product_id":"seren-led-recessed-dali-downlight-15-25w-tri-wattage-cct-white","title":"Seren LED Recessed DALI Downlight 15-25W Tri-Wattage CCT - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Seren is a recessed LED downlight with three switchable wattage settings (15W, 20W, 25W) and three colour temperatures (3000K warm white, 4000K neutral white, 5000K cool white), allowing output and light colour to be adjusted on-site during installation. The fitting houses an SMD LED array behind an opal polycarbonate diffuser and includes DALI2 control gear for integration with networked building management systems or simple room controls.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial applications including offices, retail spaces, hospitality and healthcare environments where lighting requirements vary between zones or change over time. The wattage and CCT switches sit inside the fitting body, so adjustments are made before final ceiling closure rather than needing access panels or remote controls. The 170mm cut-out and 100mm minimum void depth suit standard commercial ceiling grids and plasterboard constructions. Plug-and-play connectors simplify installation across multiple fittings on the same circuit.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium housing with white powder-coated finish provides thermal management for the LED array and carries an IP40 rating (IP20 from above), making the fitting suitable for dry internal environments. The 110° beam angle gives wide, even coverage without pronounced hot-spotting. At 25W and 5000K the fitting delivers 3,305 lumens at 168.56 lm\/W efficacy, while the 15W setting at 3000K produces 1,675 lumens for lower-intensity applications. The fitting is compatible with Knightsbridge's EMKIT2 emergency conversion kit (sold separately) for maintained or non-maintained emergency lighting compliance.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e192 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e69.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e170 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP40 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/5000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1675\/1750\/1770\/2180\/2325\/2335\/3085\/3305\/3290 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e4060 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e15 \/ 20 \/ 25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e168.56 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6495822_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1815764.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow are the wattage and CCT settings changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth the wattage (15W\/20W\/25W) and colour temperature (3000K\/4000K\/5000K) are adjusted using switches inside the fitting body. These are set during installation before the ceiling is closed, rather than being controlled remotely. Once set, the fitting operates at the selected wattage and CCT until manually changed by an electrician.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is DALI2 and do I need it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDALI2 is a digital lighting control protocol that allows the downlight to be integrated into networked building management systems for dimming, scheduling and zone control. If you are installing these into a commercial building with centralised lighting control, DALI2 compatibility is required. For standalone installations without building management systems, a non-DALI version may be more suitable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat void depth is needed above the ceiling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 100mm void depth is required above the ceiling surface to accommodate the fitting body and allow adequate thermal clearance. The recessed depth of the fitting itself is 69.5mm, with the additional clearance needed for heat dissipation and driver access.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used with emergency lighting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Seren is compatible with Knightsbridge's EMKIT2 emergency conversion kit (sold separately), which converts the downlight to maintained or non-maintained emergency operation for compliance with fire safety and emergency egress lighting regulations.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293731447051,"sku":"SER1525DALI","price":56.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1715188_370d9443-5e5e-4b4e-a184-2b6d20832d63.jpg?v=1714663398"},{"product_id":"seren-led-recessed-downlight-30-40w-tri-wattage-cct-dali-white","title":"Seren LED Recessed Downlight 30-40W Tri-Wattage CCT DALI - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Seren is a 220mm recessed LED downlight with switchable wattage (30W, 35W or 40W) and switchable colour temperature (3000K, 4000K or 5000K), controlled via DALI2 protocol. The die-cast aluminium housing contains SMD LED modules behind an opal polycarbonate diffuser, delivering 3,665-4,900 lumens depending on the wattage and CCT combination selected. The DALI2 control gear integrates into networked building control systems or simple room control setups.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial spaces requiring adaptable lighting across different zones or usage scenarios, the Seren suits retail spaces, offices, corridors and reception areas where light levels and colour temperature may need to change throughout the day or between different room functions. The 200mm ceiling cut-out fits standard commercial ceiling grids and solid ceilings with a minimum 100mm void above. The fitting arrives with plug-and-play connectors to simplify installation and reduce on-site wiring time.\u003c\/p\u003e\n\u003cp\u003eThe aluminium housing is powder-coated white to integrate cleanly with white or off-white ceiling finishes. The IP40 rating (IP20 from above) allows the fitting to be used in dry indoor environments but not in areas exposed to water ingress. The 110° beam angle provides wide area coverage, reducing the number of fittings needed to achieve even illumination across a large ceiling plane. The L70B50 rating of 50,000 hours indicates that the LEDs will maintain at least 70% of their initial output for 50,000 hours, reducing maintenance frequency in high-ceiling or difficult-to-access installations.\u003c\/p\u003e\n\u003cp\u003eThe switchable wattage allows a single SKU to be adjusted on-site to balance light output against energy consumption, while the tri-CCT flexibility means the same fitting can deliver warm white (3000K) for hospitality areas, neutral white (4000K) for general office use, or cool white (5000K) for task-heavy environments. The constant current driver operates on 230V 50Hz mains and the fitting is compatible with Knightsbridge's EMKIT2 emergency lighting module for applications requiring maintained or non-maintained emergency backup.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e69.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP40 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/5000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e3665\/3460\/3600\/4275\/4230\/4130\/4710\/4745\/4900 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e6510 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e30 \/ 35 \/ 40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e179.7 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6496236_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1815908.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the wattage and CCT selected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth wattage (30W, 35W or 40W) and colour temperature (3000K, 4000K or 5000K) are adjusted via switches on the driver unit before installation. This allows a single product to be configured for different applications on-site without stocking multiple SKUs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is DALI2 and do I need it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDALI2 is a digital lighting control protocol that allows the fitting to be controlled via a networked building management system or simple room controller. If you're installing in a commercial space with centralised lighting control, DALI2 is required. For standalone mains-switched installations, a non-DALI version may be more appropriate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires a minimum 100mm void above the ceiling surface. The recessed depth of the fitting itself is 69.5mm, with the remaining clearance allowing for heat dissipation and driver placement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used with emergency lighting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Seren is compatible with Knightsbridge's EMKIT2 emergency lighting module, which provides maintained or non-maintained emergency backup. The emergency kit is sold separately.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293731479819,"sku":"SER3040DALI","price":61.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1715488_e9a514aa-3b66-4240-9a57-a6c8a03bd4d7.jpg?v=1714663400"},{"product_id":"sara-led-recessed-tri-wattage-cct-dali-scoop-downlight-15-20-25w","title":"SARA LED Recessed Tri-Wattage CCT DALI Scoop Downlight - 15\/20\/25W","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SARA is a recessed LED scoop downlight with three switchable wattage settings (15W, 20W, 25W) and three selectable colour temperatures (3000K, 4000K, 5000K), controlled via onboard switches accessed during installation. The fitting integrates a DALI2 constant-current driver, allowing connection to room-based or networked building control systems for dimming, scene-setting and integration with presence sensors or daylight harvesting. The scoop head rotates 350° and tilts 40° from vertical, directing light onto feature walls, artwork or merchandise.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial interiors including retail, hospitality, office and exhibition spaces, the SARA suits applications where lighting requirements change over time or between zones within the same building. The switchable wattage and CCT allow the same fitting to be respecified without replacing hardware — a 3000K warm-white setting for a restaurant dining area can be switched to 5000K cool-white for a retail zone, or the 15W output increased to 25W where ceiling heights are greater. The die-cast aluminium body with white powder-coated finish integrates into standard 140mm ceiling cut-outs with a minimum void depth of 160mm.\u003c\/p\u003e\n\u003cp\u003eThe COB (chip-on-board) LED delivers up to 2,605 lumens at maximum wattage and cool-white temperature, with efficacy reaching 140 lumens per watt. The fitting ships with plug-and-play connectors for mains and DALI control lines, reducing installation time on multi-fitting projects. The Class II double-insulated construction requires no earth connection. Knightsbridge backs the SARA with a 5-year warranty and L70B50 rating of 50,000 hours, indicating 70% lumen maintenance after 50,000 hours of operation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e157 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e40 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eCoB LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/5000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1440\/1565\/1605\/1900\/2080\/2125\/2335\/2580\/2605 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e3325 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e15 \/ 20 \/ 25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e140.08 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6499731_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1815976.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow are the wattage and colour temperature settings changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWattage (15W, 20W, 25W) and CCT (3000K, 4000K, 5000K) are selected via onboard switches accessed during installation, before the fitting is secured into the ceiling void. Once set, the switches are not user-accessible without removing the fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is DALI2 and do I need it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDALI2 (Digital Addressable Lighting Interface) allows the fitting to be controlled by a room-based or building-wide lighting management system. It enables dimming, scene control, integration with presence sensors and daylight harvesting. If your installation does not use DALI control, the fitting operates at the wattage and CCT set via the onboard switches and can be controlled by standard mains switching.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum void depth of 160mm is required above the ceiling surface to accommodate the fitting body, heat sink and driver. The cut-out diameter is 140mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the fitting be used with an emergency backup system?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The SARA is compatible with Knightsbridge's EMKIT2 emergency conversion kit (sold separately), which provides emergency lighting functionality in the event of mains failure.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293731545355,"sku":"SA1525CDALI","price":61.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1715570_b8b94aa1-c2b9-48bf-9411-1bb99a3b791a.jpg?v=1714663403"},{"product_id":"sara-led-recessed-tri-wattage-cct-dali-scoop-downlight-30-35-40w","title":"SARA LED Recessed Tri-Wattage CCT DALI Scoop Downlight - 30\/35\/40W","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SARA is a recessed LED downlight with switchable wattage (30W, 35W or 40W), switchable colour temperature (3000K, 4000K or 5000K), and DALI2 control gear for integration into simple room or networked building management systems. The die-cast aluminium housing is finished in white powder coat, and the COB LED head rotates 350 degrees and tilts 40 degrees from vertical, allowing light to be directed onto walls, displays or workspaces within commercial interiors.\u003c\/p\u003e\n\u003cp\u003eDesigned for retail, office, hospitality and exhibition spaces where lighting requirements vary by zone or time of day, the SARA's wattage and CCT switching allows a single fitting type to be specified across multiple areas and adjusted on installation rather than stocking three different SKUs. The 170mm cut-out fits standard commercial ceiling grids, and the 180mm minimum void depth accommodates most suspended ceiling constructions. Plug-and-play connectors simplify installation and reduce on-site wiring time.\u003c\/p\u003e\n\u003cp\u003eThe COB LED delivers between 3,175 and 4,415 lumens depending on the wattage and CCT combination selected, with efficacy up to 130 lm\/W and CRI \u0026gt;80. The DALI2 protocol allows the fitting to be addressed individually within a lighting control network, supporting dimming, scene recall and scheduled switching. The Class II construction requires no earth connection, and the IP20 rating suits standard indoor commercial environments. An optional emergency kit (EMKIT2) is available separately for maintained or non-maintained emergency operation.\u003c\/p\u003e\n\u003cp\u003eThe white powder-coated finish integrates cleanly into white or light-coloured ceilings without visual contrast, while the 38-degree beam angle provides focused accent or task lighting rather than broad ambient wash. The 50,000-hour L70B50 rating and 5-year warranty support long-term commercial deployment with low maintenance overhead.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e190 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e170 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e40 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eCoB LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/5000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e3175\/3505\/3470\/3560\/3940\/3880\/3925\/4415\/4280 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e4975 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e30 \/ 35 \/ 40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e130.48 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6499734_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1816002.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the wattage and CCT selected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWattage and colour temperature are switched using DIP switches or selection buttons on the driver unit before installation. Once the setting is chosen and the fitting is powered, the selection remains fixed unless the fitting is powered down and the switches are changed. This is typically set once during commissioning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does DALI2 control allow?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDALI2 is a digital lighting control protocol that allows the fitting to be individually addressed and controlled within a networked system. This supports dimming, scene recall, scheduled switching, and integration with building management systems. Each fitting can be controlled independently or grouped with others in the same zone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat void depth is needed in the ceiling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 180mm void depth above the ceiling surface is required to accommodate the fitting body and driver. The 170mm cut-out diameter fits standard commercial ceiling grids.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for emergency lighting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn optional emergency kit (EMKIT2, sold separately) can be fitted to convert the SARA into a maintained or non-maintained emergency luminaire. The emergency kit is not included as standard.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293731610891,"sku":"SA3040CDALI","price":82.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1715646_6919f41f-fc41-4f32-8cfb-6dcad06d0955.jpg?v=1714663406"},{"product_id":"sara-30-40w-recessed-led-wallwasher-dali-tri-wattage-cct-selectable-white","title":"SARA 30-40W Recessed LED Wallwasher DALI - Tri-Wattage CCT Selectable White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SARA is a recessed LED wallwasher with selectable power output (30W, 35W or 40W), selectable colour temperature (3000K, 4000K or 5000K) and DALI2 control gear for integration into room or building management systems. The fitting tilts up to 60 degrees within its housing, allowing light to be directed at vertical surfaces, gallery walls, retail displays or signage from a recessed ceiling position.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial spaces where lighting needs change over time or across different zones, the tri-wattage and tri-CCT settings are configured via DIP switches on the driver before installation, so a single SKU can serve multiple applications without requiring different stock. The DALI2 protocol connects to addressable lighting control systems, allowing the fitting to be dimmed, grouped and scheduled via networked controllers. The 80-degree beam angle combined with the tilt mechanism gives asymmetric distribution suitable for washing walls from 600-900mm out from the surface.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium housing carries a white powder-coated finish and requires a 225 x 127mm rectangular cutout with a minimum 145mm ceiling void depth. The driver is housed within the body and connects via plug-and-play terminals for faster installation across multi-fitting projects. The fitting is rated IP20 for dry internal environments and carries Class II insulation. An optional emergency conversion kit (EMKIT2) can be retrofitted to enable 3-hour emergency lighting operation where required by building regulations. Knightsbridge provides a 5-year warranty on the SARA range.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e157 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e240 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e145 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e225x127 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e60 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/5000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e3795\/4050\/4175\/4240\/4565\/4680\/4760\/5100\/5235 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e5425 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e30 \/ 35 \/ 40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e166.16 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6499735_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1816010.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the wattage and colour temperature selected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth are set via DIP switches on the driver unit before installation. The fitting supports three wattage settings (30W, 35W or 40W) and three colour temperatures (3000K warm white, 4000K neutral white, 5000K cool white). Once configured, the settings remain fixed unless the driver is accessed and reconfigured.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is DALI2 and why is it useful?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDALI2 (Digital Addressable Lighting Interface) is a protocol that allows the fitting to be controlled via a building management system. Each fitting can be individually addressed, dimmed, grouped and scheduled from a central controller. This is common in commercial projects where lighting scenes need to change throughout the day or across different zones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 145mm void is required to accommodate the housing and driver assembly. The rectangular cutout measures 225 x 127mm. The fitting projects 92mm into the void once installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for emergency lighting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Knightsbridge offers an emergency conversion kit (EMKIT2, sold separately) that retrofits into the SARA housing to enable 3-hour emergency operation. This is often required in commercial buildings to comply with UK fire safety regulations.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293731643659,"sku":"SA3040RWDALI","price":83.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1715720_ba62a158-ad9c-49e9-b66a-b9453b195326.jpg?v=1714663408"},{"product_id":"5w-led-outdoor-security-bulkhead-with-daylight-sensor-white","title":"5W LED Outdoor Security Bulkhead with Daylight Sensor - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge AMLEDWP is a 5W LED outdoor bulkhead with an integrated photocell daylight sensor that automatically switches the light on at dusk and off at dawn. The fitting houses an SMD LED array behind an opal polycarbonate diffuser, delivering 460lm at 4000K cool white through a 120° beam angle. The IP54 rating protects against dust ingress and water splashes from any direction, making it suitable for covered outdoor positions such as porches, rear entrances, sheds, and garage exteriors.\u003c\/p\u003e\n\u003cp\u003eDesigned for security and low-level continuous lighting, the bulkhead provides automated illumination without needing manual switching or timer programming. The daylight sensor is calibrated for exterior use only and will not function reliably indoors where ambient light levels differ. The white polycarbonate base and diffuser resist impact and UV degradation better than acrylic alternatives, maintaining clarity and colour stability across the rated 60,000-hour L70B50 lifespan.\u003c\/p\u003e\n\u003cp\u003eThe bulkhead measures 197mm x 108mm with a 78mm projection from the wall, fitting standard outdoor electrical boxes. The Class II double-insulated construction means no earth connection is required during installation, simplifying wiring in older properties. The opal diffuser spreads light evenly across doorways and pathways without harsh glare, while the 100lm\/W efficacy keeps running costs low for fixtures that operate through the night.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e197 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e108 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e78 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e60000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e4000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCool White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e460 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e520 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e100 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4091990_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_806794.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the daylight sensor work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integrated photocell detects ambient light levels and automatically switches the bulkhead on at dusk and off at dawn. The sensor is calibrated for exterior use only and will not function reliably if installed indoors where ambient light levels differ from natural daylight cycles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP54 mean for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP54 means the bulkhead is protected against dust ingress and water splashes from any direction. It is suitable for covered outdoor positions such as porches, rear entrances, sheds and garage exteriors, but should not be exposed to sustained direct rainfall or submersion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the LED replaceable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The 5W SMD LED array is integrated into the bulkhead and cannot be replaced. The rated L70B50 lifespan of 60,000 hours means the LED will still produce at least 70% of its original output after approximately 6.8 years of continuous operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used indoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bulkhead itself can be installed indoors for general lighting, but the daylight sensor will not function reliably in indoor environments where artificial lighting affects ambient light levels. For indoor use without automatic switching, consider a standard bulkhead without a photocell.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293741506827,"sku":"AMLEDWP","price":28.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/485248_acf41648-64ab-4fa3-9dfa-c41e3efd873c.jpg?v=1714663563"},{"product_id":"20w-led-bulkhead-with-sensor-ip65-cct-adjustable-white","title":"20W LED Bulkhead with Sensor IP65 CCT Adjustable - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge BT20CTS is a 20W LED bulkhead fitting with an integrated microwave sensor and CCT adjustment, allowing the light colour to be switched between 3000K warm white, 4000K neutral white and 5700K cool daylight. The sensor detects movement within its adjustable detection zone and can be configured to set lux threshold and hold time, making the fitting suitable for automatic lighting in corridors, car parks, storage areas and external wall-mounted positions.\u003c\/p\u003e\n\u003cp\u003eDesigned for both wall and ceiling mounting, the bulkhead carries an IP65 rating against dust and water ingress, allowing it to be installed in exposed outdoor positions, parking areas, industrial loading bays and washroom facilities. The polycarbonate body and opal diffuser give impact resistance and UV stability in outdoor use. The hinged LED gear tray opens for quick access to the push-fit terminal block during installation, and the low 81mm projection keeps the fitting close to the wall or ceiling surface.\u003c\/p\u003e\n\u003cp\u003eThe CCT adjustment is set via a switch on the rear of the fitting before installation, with lumen output varying by colour temperature: 1530lm at 3000K, 1760lm at 4000K, and 1640lm at 5700K. The sensor's detection range, lux level and hold time are adjustable via controls behind the diffuser, allowing the fitting to be tuned to different environments without rewiring. The LED module is rated for 60,000 hours at L70B50, giving approximately 15-20 years of typical use in sensor-controlled applications.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e380 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e81 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e60000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/5700 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1530 \/ 1760 \/ 1640 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e2575 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e137.9 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3098673_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_812244.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the CCT colour temperature changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CCT is set using a switch on the rear of the fitting before installation. The options are 3000K warm white (1530lm), 4000K neutral white (1760lm) and 5700K cool daylight (1640lm). The setting cannot be changed once the fitting is mounted without removing it from the wall or ceiling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the sensor adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe microwave sensor has three adjustable controls behind the diffuser: detection range, lux threshold (the ambient light level below which the sensor will activate) and hold time (how long the light stays on after movement stops). These are adjusted using small dials or switches accessible when the diffuser is opened.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in a bathroom or shower area?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating protects against water jets from any direction, making the bulkhead suitable for bathroom zone 1 and zone 2 positions (outside the shower enclosure). It should not be installed directly inside a shower cubicle (zone 0) as that requires IP67 or higher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fixing method does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bulkhead mounts to a standard wall or ceiling surface using fixing screws through the rear baseplate (screws not supplied). The hinged gear tray opens to reveal the push-fit terminal block for mains connection. A knock-out entry point on the rear accepts 20mm conduit for concealed cable runs.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293747634443,"sku":"BT20CTS","price":83.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/177410_1d9b466b-b27b-47e7-9a56-86cfcc728c36.jpg?v=1714663662"},{"product_id":"18w-led-outdoor-bulkhead-cct-selectable-emergency-microwave-sensor-black","title":"18W LED Outdoor Bulkhead CCT Selectable Emergency \u0026 Microwave Sensor - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Sherpa 18W LED bulkhead combines emergency backup lighting and a microwave motion sensor in a die-cast aluminium body with an opal polycarbonate diffuser. The CCT-adjustable gear tray switches between three colour temperatures (3000K warm white, 4000K neutral white, 6000K cool white) during installation, delivering 1680lm, 1790lm and 1810lm respectively at 18W constant current draw.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial, industrial and residential perimeters, car parks, loading bays, stairwells and building entrances, the bulkhead provides three emergency modes (maintained, non-maintained and switched) with 190-200lm emergency output during mains failure. The microwave sensor detects motion through the diffuser and triggers full-brightness illumination, cutting energy waste in low-traffic periods while maintaining security coverage. The IP65 rating seals the body against dust ingress and water jets from any direction.\u003c\/p\u003e\n\u003cp\u003eThe 360mm diameter gives wide-area illumination at 110-degree beam spread, suitable for mounting at 3-4m heights over walkways, entrances and car parking bays. The die-cast aluminium construction resists impact and vandalism in public-access areas, and the black powder-coated finish withstands UV exposure without fading. The opal diffuser softens the light output to reduce glare while maintaining high efficacy at 132.6 lumens per watt.\u003c\/p\u003e\n\u003cp\u003eThe bulkhead ships with the emergency battery and gear tray pre-installed. The diffuser is secured with visible fixings for field maintenance, and the CCT switch is accessed by removing the diffuser during installation. The L70B50 rating of 50,000 hours indicates that after 50,000 operating hours, at least 50% of a batch will still deliver at least 70% of initial lumen output.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e360 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEmergency\u003c\/td\u003e\n\u003ctd\u003eMaintained \/ Non-maintained \/ Switched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1680\/1790\/1810 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e3000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Em. mode)\u003c\/td\u003e\n\u003ctd\u003e190\/200\/190 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e132.6 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty Information\u003c\/td\u003e\n\u003ctd\u003eExcluding battery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3159361_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1188978.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the CCT switching work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe gear tray inside the bulkhead has a physical switch accessible when the diffuser is removed. You set it to one of three positions during installation: 3000K warm white, 4000K neutral white, or 6000K cool white. Once set, the colour temperature is fixed until you open the fitting and change it again.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the three emergency modes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMaintained mode keeps the emergency lamp on continuously, running from mains power and switching to battery during outages. Non-maintained mode only lights the emergency lamp during mains failure. Switched mode operates like maintained but allows the emergency lamp to be switched off when not needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the microwave sensor detect motion?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe microwave sensor emits a low-power radar field through the diffuser and detects changes caused by movement within its range. Unlike passive infrared sensors, it can detect motion through some non-metallic barriers and is less affected by temperature changes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the emergency battery user-replaceable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The battery is accessed by removing the diffuser and disconnecting the internal connector. The 5-year warranty excludes the battery, which is a consumable component with a typical service life of 3-4 years depending on cycling frequency.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293955416331,"sku":"SHE1BEMS","price":96.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/179534_ca868ef3-db24-4f54-b63a-1b8b7b5a9231.jpg?v=1714666772"},{"product_id":"18w-led-bulkhead-ip65-microwave-sensor-cct-black","title":"18W LED Bulkhead IP65 Microwave Sensor CCT - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Sherpa 18W LED bulkhead combines a microwave motion sensor with a CCT-switchable LED gear tray in a die-cast aluminium housing. The sensor detects movement through the opal polycarbonate diffuser, triggering the light without requiring a wall-mounted PIR, and the CCT switch on the gear tray allows selection between 3000K (1680lm), 4000K (1790lm) or 6000K (1810lm) output depending on the application.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor wall and soffit mounting in commercial, residential and industrial settings, the bulkhead suits building perimeters, bin stores, car parks, pathways and loading bays where motion-activated lighting reduces energy use and deters unauthorised access. The IP65 rating seals the housing against dust ingress and water jets from any direction, allowing year-round outdoor use in UK weather. The 360mm diameter and 92mm projection give enough coverage for doorways and alcoves without dominating smaller wall areas.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium body dissipates heat from the 18W SMD LED array, supporting the 50,000-hour L70B50 rating. The anti-vandal polycarbonate diffuser resists impact without shattering, making the fitting suitable for public-facing and unsupervised locations. The black powder-coat finish hides dust and weathering better than lighter colours in high-particulate environments. The constant-current driver operates on 230V 50Hz mains and the fitting carries a 5-year manufacturer warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e360 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1680\/1790\/1810 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e3000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e132.6 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3159365_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1188968.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the microwave sensor work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe microwave sensor detects movement through the polycarbonate diffuser using radio frequency waves, triggering the light when motion is detected within range. This differs from PIR sensors which detect infrared heat. The sensor is integrated into the fitting, so no separate wall-mounted PIR is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LED gear tray inside the bulkhead has a CCT selector switch accessible when the diffuser is removed. The switch allows selection between 3000K warm white, 4000K neutral white, or 6000K cool white. The colour temperature is set during installation and is not dynamically adjustable once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for coastal locations?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating and die-cast aluminium construction provide good resistance to moisture and dust, but coastal environments with salt spray can accelerate corrosion of metal fittings. Regular cleaning and inspection are recommended in marine locations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat detection range does the sensor have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMicrowave sensor range varies with mounting height and angle. Typical detection range for this type of sensor is 8-12m radius when mounted at 2.5-3m height, but consult the product manual for specific coverage data and adjustment instructions.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293955744011,"sku":"SHE1BS","price":75.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/179536_fd4e2ee7-b04a-48f5-84dc-c81898a535f0.jpg?v=1714666776"},{"product_id":"18w-led-bulkhead-emergency-microwave-sensor-ip65-grey","title":"18W LED Bulkhead Emergency \u0026 Microwave Sensor IP65 - Grey","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Sherpa is an 18W LED bulkhead with a built-in emergency battery and microwave sensor, housed in a 360mm diameter die-cast aluminium body with an opal polycarbonate diffuser. The integrated sensor activates the light when motion is detected, reverting to standby after a set period, while the emergency function provides maintained or non-maintained backup lighting during mains failure.\u003c\/p\u003e\n\u003cp\u003eDesigned for parking areas, service yards, pathways and building perimeters where security lighting and emergency backup are both required, the bulkhead carries an IP65 rating for dust and water ingress protection. The microwave sensor detects motion through the diffuser without requiring an external PIR unit, simplifying installation and reducing visible hardware. The CCT-switchable gear tray allows the bulkhead to be set to 3000K, 4000K or 6000K at installation, delivering 1680lm, 1790lm or 1810lm respectively at full brightness.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium body is powder-coated grey and rated IK08 for impact resistance, making the fitting suitable for areas where vandal resistance is needed. The opal diffuser provides a 110° beam angle for wide-spread illumination without direct glare. The SMD LED module is rated for 50,000 hours to L70B50, and the driver operates on constant current at 230V 50Hz. The emergency battery provides 190-200lm output in emergency mode depending on CCT selection.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e360 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEmergency\u003c\/td\u003e\n\u003ctd\u003eMaintained \/ Non-maintained \/ Switched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1680\/1790\/1810 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e3000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Em. mode)\u003c\/td\u003e\n\u003ctd\u003e190\/200\/190 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e132.6 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty Information\u003c\/td\u003e\n\u003ctd\u003eExcluding battery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3159367_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1188980.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the microwave sensor work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe microwave sensor detects motion through the diffuser using radar technology, activating the bulkhead when movement is detected and switching it off after a set period. The sensor does not require line-of-sight and can detect through the polycarbonate diffuser without an external PIR unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat colour temperature should I choose?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CCT is selectable at installation via a switch on the gear tray. 3000K gives warm white light suitable for residential pathways and entrances, 4000K is neutral white suited to commercial and industrial applications, and 6000K is cool white often used in service yards and security lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the emergency function operate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bulkhead can be wired for maintained, non-maintained or switched emergency operation. In maintained mode the fitting runs continuously on mains and switches to battery during power failure. In non-maintained mode the emergency light only activates during a mains outage. The emergency output is 190-200lm depending on CCT selection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bulkhead suitable for coastal environments?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating protects against water jets and dust ingress, and the die-cast aluminium body with powder-coat finish provides corrosion resistance. For long-term coastal exposure where salt spray is present, periodic inspection and cleaning of the diffuser seal is recommended to maintain the IP rating.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293956006155,"sku":"SHE1GEMS","price":114.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/179546_b9afebd4-47b2-4e7a-aa2c-959ea283a3db.jpg?v=1714666787"},{"product_id":"18w-led-bulkhead-ip65-microwave-sensor-cct-grey","title":"18W LED Bulkhead IP65 Microwave Sensor CCT - Grey","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 18W LED bulkhead combines integrated motion detection with a switchable colour temperature LED in a 360mm diameter die-cast aluminium housing finished in grey. The microwave sensor detects movement through walls and glass within its detection zone, switching the light on when motion is detected and off after a set period, reducing energy consumption compared to permanently-lit outdoor fittings. The CCT gear tray allows switching between 3000K warm white (1680lm), 4000K neutral white (1790lm), and 6000K cool white (1810lm) to match the required colour temperature for the application.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor wall and soffit mounting on building entrances, pathways, car parks, industrial yards and covered loading bays, the bulkhead carries an IP65 rating protecting the LED and driver from dust ingress and water jets from any direction. The polycarbonate diffuser is impact-resistant and vandal-resistant, suitable for high-traffic public areas and commercial premises where deliberate or accidental impact may occur. The 92mm projection from the wall gives clearance for the sensor and driver without dominating the facade.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium body dissipates heat from the 18W SMD LED array, maintaining consistent light output over the 50,000-hour L70B50 rated lifespan. The opal diffuser distributes light across a 110-degree beam angle, providing wide-area illumination rather than a narrow spot. The fitting is not dimmable and operates on 230V 50Hz mains with a constant-current driver. The grey finish is a mid-tone neutral that recedes visually against rendered, brick or concrete facades and does not show weathering or minor marking as quickly as white or black alternatives.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\" style=\"width: 100%; height: 411.6px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e360 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eProjection\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eClass\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eIP Rating\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eDiffuser\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eLamp Technology\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eDimmable\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eL70B50\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eBeam Angle\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eCCT\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eLumens\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e1680\/1790\/1810 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e3000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eEfficacy\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e132.6 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eCRI\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e\u0026gt;85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eDriver Type\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3159368_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1188970.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the microwave sensor work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe microwave sensor emits radio frequency waves and detects changes in the reflected signal when motion occurs within the detection zone. Unlike passive infrared sensors, microwave sensors can detect movement through non-metallic barriers such as walls and glass, making them effective in covered outdoor areas and around corners. The sensor triggers the light to turn on when motion is detected and switches off after a preset time-out period once motion stops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does CCT switchable mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCCT (correlated colour temperature) switchable means the LED gear tray inside the bulkhead has a physical switch allowing you to select one of three colour temperatures: 3000K warm white, 4000K neutral white, or 6000K cool white. The selection is made once during installation by changing the switch position on the gear tray before fitting the diffuser. This allows the same fitting to be used across different applications without stocking multiple SKUs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP65 rating mean in practice?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 means the bulkhead is fully protected against dust ingress (the '6') and protected against water jets from any direction (the '5'). In practice, this means the fitting can be installed in fully exposed outdoor positions including car park soffits, building entrances, external corridors, and industrial yards where it will be subject to rain, windblown water, and hosing down. It is not rated for full submersion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature changed after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CCT switch is located on the LED gear tray inside the bulkhead. To change the colour temperature after installation, the diffuser must be removed by unscrewing the four perimeter fixings, the switch position changed, and the diffuser refitted. This requires isolating the electrical supply and is not intended as a regular adjustment.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293956104459,"sku":"SHE1GS","price":75.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/179552_81580867-388c-4c9d-9ce1-5ba9473db72b.jpg?v=1714666791"},{"product_id":"18w-outdoor-cct-led-eyelid-bulkhead-emergency-microwave-sensor-black-ip65","title":"18W Outdoor CCT LED Eyelid Bulkhead Emergency Microwave Sensor - Black IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SHE2BEMS is an 18W outdoor LED bulkhead with integrated emergency lighting and a microwave motion sensor, housed in a 360mm die-cast aluminium body with a black powder-coat finish and an opal polycarbonate diffuser. The LED gear tray offers three selectable colour temperatures via onboard switches: 3000K warm white (1020lm), 4000K neutral white (1080lm), or 6000K cool white (1090lm). The emergency function provides maintained, non-maintained or switched operation, giving 105-120lm output during power cuts depending on the selected CCT.\u003c\/p\u003e\n\u003cp\u003eDesigned for external building entrances, car parks, loading bays, communal corridors and stairwells, the bulkhead carries an IP65 rating against dust and water ingress, making it suitable for fully exposed outdoor installation in all UK weather conditions. The microwave sensor detects motion through the diffuser and automatically switches the light on when movement is detected, then switches off after a preset delay, reducing energy consumption in areas with intermittent use. The eyelid hood design directs light downward and reduces upward light spill, helping to comply with dark-sky guidelines in sensitive locations.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium body is impact-resistant and classed as anti-vandal, making it suitable for public spaces and exposed commercial sites where tampering or accidental impact is a concern. The fitting weighs approximately 2kg and mounts to a standard wall or ceiling surface via rear fixings concealed behind the body. The opal diffuser spreads the 110° beam evenly across the illuminated area without visible LED hotspots. The L70B50 rating of 50,000 hours indicates the point at which 50% of a sample batch would have degraded to 70% of initial output, translating to approximately 11 years of continuous operation before significant lumen depreciation occurs.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e360 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e94 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEmergency\u003c\/td\u003e\n\u003ctd\u003eMaintained \/ Non-maintained \/ Switched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1020\/1080\/1090 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e3000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Em. mode)\u003c\/td\u003e\n\u003ctd\u003e105\/120\/110 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e132.6 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty Information\u003c\/td\u003e\n\u003ctd\u003eExcluding battery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3159358_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1188984.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the three CCT settings and how are they changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bulkhead offers 3000K warm white (1020lm), 4000K neutral white (1080lm), and 6000K cool white (1090lm). The colour temperature is selected via onboard switches on the LED gear tray, accessible during installation. Once set, the colour temperature remains fixed until the fitting is opened and the switch position is changed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the emergency function work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe emergency mode can be configured as maintained (light on continuously, switching to battery during power cuts), non-maintained (light off until power cuts, then battery activates), or switched (mains-controlled normally, battery backup during cuts). In emergency mode the output drops to 105-120lm depending on CCT. The emergency battery is not covered by the 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the microwave sensor detection range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMicrowave sensors typically detect motion through non-metallic materials at ranges of 8-12m depending on the size of the moving object and installation height. The exact detection range and time delay for this model are adjustable via controls on the sensor module, accessible during installation. Refer to the product manual in the Downloads tab for specific settings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for coastal or high-salt environments?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating protects against water and dust ingress, and the die-cast aluminium body with powder-coat finish offers good corrosion resistance. However, in direct coastal exposure or high-salt environments, periodic inspection and cleaning is recommended to prevent salt build-up around seals and fixings.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293956497675,"sku":"SHE2BEMS","price":95.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/179520_7b82e51d-0da1-40cc-ab81-d5d233c2bad1.jpg?v=1714666802"},{"product_id":"18w-outdoor-led-eyelid-bulkhead-with-daylight-sensor-black-ip65","title":"18W Outdoor LED Eyelid Bulkhead with Daylight Sensor - Black IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 18W LED eyelid bulkhead combines die-cast aluminium construction with an integrated daylight sensor and CCT-switchable LED gear tray offering 3000K (1020lm), 4000K (1080lm), or 6000K (1090lm) output. The eyelid hood shields the opal polycarbonate diffuser from direct view from above, reducing upward light spill and glare while directing illumination downward and outward across pathways, building perimeters and covered outdoor areas.\u003c\/p\u003e\n\u003cp\u003eDesigned for exterior wall mounting on residential, commercial and industrial buildings, the bulkhead suits entrances, covered walkways, loading bays, car parks and garden perimeters where automated dusk-to-dawn operation is required. The integral photocell switches the light on when ambient light drops below a threshold and off again at dawn, removing the need for separate timers or manual switching. The IP65 rating protects against dust ingress and water jets from any direction, so the fitting tolerates exposed positions in UK weather.\u003c\/p\u003e\n\u003cp\u003eThe 360mm diameter circular body projects 94mm from the wall once surface-mounted, and the black powder-coated finish on the aluminium housing resists corrosion in coastal and urban environments. The opal diffuser is impact-resistant polycarbonate secured with anti-vandal fixings, making the bulkhead suitable for public-facing positions where accidental or deliberate impact is a risk. The SMD LED array inside is rated L70B50 at 50,000 hours, meaning it will retain at least 70% of initial output after approximately 5.7 years of continuous operation before requiring replacement.\u003c\/p\u003e\n\u003cp\u003eThe CCT switch on the gear tray allows the installer to select warm white (3000K), neutral white (4000K) or cool white (6000K) at the point of installation, giving flexibility to match the colour temperature to the surrounding environment or existing fittings without stocking multiple product variants. The constant-current driver operates on 230V 50Hz mains and the fitting is Class I, requiring an earth connection during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\" style=\"width: 100%; height: 411.6px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e360 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eProjection\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e94 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eClass\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eIP Rating\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eDiffuser\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eLamp Technology\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eDimmable\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eL70B50\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eBeam Angle\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eCCT\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eLumens\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e1020\/1080\/1090 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e3000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eEfficacy\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e153.2 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eCRI\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e\u0026gt;85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eDriver Type\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.8923%; height: 19.6px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"width: 34.6259%; height: 19.6px;\"\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3327055_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_881278.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the daylight sensor work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integral photocell detects ambient light levels and automatically switches the bulkhead on at dusk and off at dawn. The sensor threshold is factory-set and does not require adjustment during installation. The bulkhead must be positioned where the sensor can read natural daylight — avoid installing under deep eaves or in shaded recesses where the sensor cannot detect dawn.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does CCT switchable mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LED gear tray inside the bulkhead has a physical switch allowing the installer to select 3000K warm white, 4000K neutral white, or 6000K cool white at the point of installation. Once set, the colour temperature remains fixed — it is not user-adjustable after the fitting is closed and installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be installed in fully exposed positions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating protects against dust ingress and water jets from any direction, so the bulkhead tolerates rain, snow and direct hose-down. The die-cast aluminium housing and impact-resistant polycarbonate diffuser are designed for year-round outdoor exposure in UK weather.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bulkhead vandal-resistant?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe diffuser is secured with anti-vandal polycarbonate fixings and the polycarbonate material itself resists impact better than glass or acrylic. This makes the fitting suitable for public-facing positions such as building entrances, car parks and communal walkways where accidental or deliberate impact is a risk.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293956563211,"sku":"SHE2BP","price":75.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/199464_ff9d737a-1b5b-4d44-8180-01e237c5226f.jpg?v=1714666805"},{"product_id":"18w-led-eyelid-bulkhead-with-microwave-sensor-black-ip65","title":"18W LED Eyelid Bulkhead with Microwave Sensor - Black IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 18W LED eyelid bulkhead combines a microwave motion sensor with CCT-adjustable SMD LED technology in a die-cast aluminium housing finished in black. The eyelid design places a curved hood over the top half of the 360mm circular diffuser, directing light downward and reducing upward glare and light spill into neighbouring properties or the night sky.\u003c\/p\u003e\n\u003cp\u003eDesigned for pathway lighting, building entrances, car parks and industrial yard perimeters, the integrated microwave sensor detects movement through the polycarbonate diffuser and switches the light on automatically, then off after a preset delay when no further motion is detected. This reduces runtime compared to dusk-to-dawn operation and extends the 50,000-hour L70B50 rated lifespan of the integrated LED. The IP65 rating protects against dust ingress and water jets from any direction, making the fitting suitable for fully exposed coastal and industrial environments.\u003c\/p\u003e\n\u003cp\u003eThe CCT adjustment allows the colour temperature to be set during installation to 3000K warm white (1020lm), 4000K neutral white (1080lm), or 6000K cool white (1090lm) by switching a selector on the LED gear tray behind the diffuser. The opal polycarbonate diffuser spreads light across a 110-degree beam angle, and the die-cast aluminium body dissipates heat efficiently to maintain consistent output over the 50,000-hour rated life. Anti-vandal polycarbonate fixings resist tampering in public-access locations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e360 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e94 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1020\/1080\/1090 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e3000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e153.2 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3159359_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1188972.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the microwave sensor work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe microwave sensor detects movement by emitting microwave pulses and measuring the reflection pattern. When movement is detected, the light switches on and remains on for a preset duration (typically 30-90 seconds depending on model settings) after the last detected motion, then switches off to conserve energy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the CCT colour temperature adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA selector switch on the LED gear tray behind the diffuser allows you to choose between 3000K warm white, 4000K neutral white, or 6000K cool white. The setting is adjusted during installation and remains fixed unless the fitting is opened again to change it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the IP65 rating suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 provides complete protection against dust ingress and protection against water jets from any direction. This makes the bulkhead suitable for fully exposed outdoor locations including coastal areas, car parks, industrial yards, building perimeters and pathway lighting in all UK weather conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the eyelid design do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe curved hood over the top half of the diffuser directs light downward and prevents upward light spill. This reduces glare for people approaching the fitting, minimises light pollution into neighbouring properties and the night sky, and concentrates more useful light onto paths, doorways and ground-level surfaces.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293956595979,"sku":"SHE2BS","price":77.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/179526_22c1d42a-1d5c-493b-b3cc-902340680d8a.jpg?v=1714666807"},{"product_id":"18w-led-eyelid-bulkhead-with-daylight-sensor-grey-ip65","title":"18W LED Eyelid Bulkhead With Daylight Sensor - Grey IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 18W LED eyelid bulkhead is a wall-mounted outdoor light fitting with an integrated photocell daylight sensor and CCT-adjustable LED gear tray. The die-cast aluminium body is finished in grey powder coat, and the eyelid hood sits above an opal polycarbonate diffuser that covers the 360mm circular face. The photocell switches the bulkhead on automatically at dusk and off at dawn, removing the need for manual switching or timers.\u003c\/p\u003e\n\u003cp\u003eDesigned for exterior walls on commercial buildings, residential façades, parking areas, pathway lighting and communal areas, the bulkhead carries an IP65 rating for dust and water ingress protection. The eyelid hood directs light downward and reduces upward glare, making the fitting suitable for locations near windows or where light pollution is a consideration. The 94mm projection from the wall gives clearance for surface-mount wiring and standard back boxes.\u003c\/p\u003e\n\u003cp\u003eThe LED gear tray is adjustable for three colour temperatures: 3000K (1020lm warm white), 4000K (1080lm neutral white) and 6000K (1090lm cool white). The selection is made via a switch on the gear tray before installation, allowing the colour temperature to be matched to the surrounding lighting scheme. The constant-current driver runs at 18W and the SMD LED array is rated for 50,000 hours to L70 (70% lumen maintenance), which equates to approximately 13 years at 10 hours per night operation. The die-cast aluminium construction and impact-resistant polycarbonate diffuser provide anti-vandal protection in exposed public areas.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e360 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e94 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1020\/1080\/1090 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e3000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e153.2 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3327545_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_881280.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the photocell sensor work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integrated photocell detects ambient light levels and switches the bulkhead on automatically when daylight falls below a preset threshold (typically at dusk) and off again at dawn. The sensor does not require programming or manual intervention once wired to mains power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the colour temperature be changed after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CCT selection switch is on the LED gear tray inside the bulkhead. Changing the colour temperature after installation requires removing the diffuser and accessing the gear tray, so it is best set during the initial fitting. The three settings are 3000K (warm white), 4000K (neutral white) and 6000K (cool white).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bulkhead suitable for coastal or high-moisture environments?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating provides protection against dust and low-pressure water jets, making the bulkhead suitable for most UK outdoor environments including coastal areas. However, direct exposure to salt spray over time may degrade the powder-coated finish, so periodic inspection and cleaning is recommended in marine environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fixing method is used?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bulkhead surface-mounts to exterior walls via three fixing points on the rear plate. Standard wall plugs and screws are used for masonry or brick, and the 94mm projection allows clearance for surface-mount conduit or back boxes. The diffuser is secured with stainless steel screws.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293957021963,"sku":"SHE2GP","price":72.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/199466_423152e0-1e3b-411f-a410-73c95942710d.jpg?v=1714666819"},{"product_id":"18w-outdoor-cct-led-eyelid-bulkhead-with-microwave-sensor-grey","title":"18W Outdoor CCT LED Eyelid Bulkhead With Microwave Sensor - Grey","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 18W Outdoor CCT LED Eyelid Bulkhead is a die-cast aluminium wall fitting with an integrated microwave sensor and adjustable colour temperature. The bulkhead measures 360mm diameter and projects 94mm from the wall, housing an 18W SMD LED array behind an opal polycarbonate diffuser. The microwave sensor detects motion within its range and switches the light on automatically, providing security lighting for building entrances, pathways and car parks without needing manual switching.\u003c\/p\u003e\n\u003cp\u003eThe CCT adjustment on the LED gear tray allows the output to be set to 3000K (1020lm warm white), 4000K (1080lm neutral white) or 6000K (1090lm cool white) during installation, giving flexibility to match the light temperature to the surroundings without ordering three separate models. The IP65 rating protects the internal components from dust and water jets from any direction, making the bulkhead suitable for fully exposed outdoor locations including coastal environments. The eyelid hood over the top half of the diffuser shields the light source from direct view when approached from above, reducing glare on stairs and sloped pathways.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium body in grey powder coat finish resists corrosion and impact, with stainless steel fixings securing the diffuser to the body. The anti-vandal construction and 50,000-hour L70B50 rating (the point at which LED output drops to 70% of initial lumens, with no more than 50% of the array having failed) support maintenance-free operation in high-use public spaces. The bulkhead operates on 230V mains with a constant-current driver and accepts surface or semi-recessed mounting into masonry or metal substrates.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e360 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e94 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1020\/1080\/1090 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e3000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e153.2 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3159545_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1188974.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the microwave sensor work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integrated microwave sensor detects motion within its range by emitting microwave pulses and measuring reflections from moving objects. When motion is detected the bulkhead switches on automatically and remains lit for a preset hold time (adjustable on some models). This differs from PIR sensors which detect infrared radiation — microwave sensors work through non-metallic materials and are less affected by temperature changes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the CCT adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LED gear tray inside the bulkhead has a physical switch or dip switch that sets the colour temperature to 3000K, 4000K or 6000K. The adjustment is made during installation before the diffuser is fitted, and the setting remains fixed once the bulkhead is sealed. The setting cannot be changed remotely or once the fitting is fully assembled on the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in coastal locations?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating protects against water jets and salt spray, and the die-cast aluminium body with powder coat finish resists corrosion. Stainless steel fixings are used throughout. For extreme coastal exposure with direct salt water contact, periodic rinsing with fresh water will extend the finish life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounting depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bulkhead can be surface-mounted onto any flat substrate with the 94mm projection extending from the wall, requiring no recess. For semi-recessed mounting a shallow recess of approximately 30-40mm can reduce the overall projection, but the full 94mm depth is not required to be recessed — consult the installation manual for exact dimensions.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293957054731,"sku":"SHE2GS","price":74.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/179564_1096e46e-063f-4359-af10-cf10f9046e2c.jpg?v=1714666822"},{"product_id":"lyyt-rgb-led-strip-controller-with-ir-remote-12v-dc-3x2a","title":"LYYT RGB LED Strip Controller With IR Remote - 12V DC 3x2A","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT RGB controller connects between a 12V DC power supply and RGB LED tape, allowing wireless colour, brightness and mode selection via a handheld 24-button infrared remote. The controller outputs up to 2A per channel across red, green and blue lines, supporting RGB LED tape runs up to approximately 5m in total length depending on the tape's wattage per metre.\u003c\/p\u003e\n\u003cp\u003eDesigned for accent lighting installations in alcoves, under-cabinet lighting in kitchens, behind TVs and media units, and small signage or display applications, the controller provides 16 preset static colours selected by individual buttons on the remote, plus four automatic colour-change modes (flash, strobe, fade, smooth). Brightness can be adjusted on the remote using the up\/down buttons, and the controller remembers the last-used setting after power-off.\u003c\/p\u003e\n\u003cp\u003eThe controller measures 50 x 35 x 25mm and includes two mounting points for screw-fixing to a wall, inside a cabinet or onto the back of furniture. The IR receiver on the controller picks up the remote signal from up to 10m away in direct line of sight, making it suitable for ceiling or high-mounted installations controlled from floor level. The white plastic housing blends into most interior surfaces when installed out of sight. The remote runs on a single CR2025 coin cell battery and weighs 21g.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e12Vdc (2.1mm DC socket)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. current per channel\u003c\/td\u003e\n\u003ctd\u003e3 x 2A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (remote)\u003c\/td\u003e\n\u003ctd\u003e85mm x 55mm x 8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (controller)\u003c\/td\u003e\n\u003ctd\u003e35mm x 50mm x 25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (remote)\u003c\/td\u003e\n\u003ctd\u003e0.02KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (controller)\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote battery\u003c\/td\u003e\n\u003ctd\u003e1 x CR2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote range\u003c\/td\u003e\n\u003ctd\u003e10m (line of sight)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153741UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length of LED tape can this controller handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe controller outputs 2A per channel across red, green and blue. If your RGB LED tape draws 1A per metre, the controller can handle up to 2m. If the tape draws 0.4A per metre, it can handle approximately 5m. Check your LED tape specification for current draw per metre and calculate accordingly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the controller need a separate power supply?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The controller sits between your 12V DC power supply and the LED tape. The power supply connects to the controller via a 2.1mm DC socket, and the LED tape connects to the output terminals on the controller. A suitable 12V power supply is sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the remote work through cabinet doors or walls?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The remote uses infrared line-of-sight communication and requires a clear path to the IR receiver on the controller. It will not work through solid materials like wood, metal or plasterboard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the controller remember the last colour and brightness setting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The controller stores the last-used colour, brightness and mode in memory, so when power is restored after being switched off, it resumes the previous setting rather than defaulting to white or full brightness.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313169490187,"sku":"153.741UK","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153741UK_0.jpg?v=1784891330"},{"product_id":"lyyt-rgbw-led-strip-sound-active-controller-with-rf-remote-5-24v","title":"LYYT RGBW Sound-Active LED Strip Controller with RF Remote","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT RGBW controller is a sound-activated LED strip driver compatible with both RGB and RGBW tape running from 5V to 24V DC supplies. The unit accepts up to 16A total input and outputs 5A per channel for RGB mode or 4A per channel for RGBW mode, controlling colour and brightness through screw terminals labelled W, B, G, R and V+. A 24-key RF remote transmits on 433.92MHz, allowing wireless control without line-of-sight.\u003c\/p\u003e\n\u003cp\u003eDesigned for architectural accent lighting, bar and club installations, stage backdrops and signage where colour needs to react to music or ambient sound, the controller offers three sound-activated sequences with adjustable sensitivity via a 3.5mm mono jack audio input or the built-in microphone. The unit also provides eight static colour presets, three automatic colour-change sequences with speed adjustment, and a colour scroll mode selecting from 1,024 colours which can be saved as a DIY preset. Brightness dimming works across all modes.\u003c\/p\u003e\n\u003cp\u003eThe white polycarbonate housing measures 75 x 43 x 20mm and weighs 84g, small enough to conceal behind architectural features or inside signage enclosures. Power can be supplied via the DC5521 barrel jack or directly to the screw terminals, and the controller switches between RGB and RGBW modes via an onboard selector. The RF remote runs on a CR2025 lithium cell (supplied) and does not require batteries to be changed frequently under normal use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e5V-24V (16A max.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery : remote\u003c\/td\u003e\n\u003ctd\u003eCR2025 Lithium Cell (supplied)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003eW \/ B \/ G \/ R \/ V+ screw terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower connection\u003c\/td\u003e\n\u003ctd\u003eDC5521 Jack or screw terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier frequency\u003c\/td\u003e\n\u003ctd\u003e433.92MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio in connector\u003c\/td\u003e\n\u003ctd\u003e3.5mm mono jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndicators\u003c\/td\u003e\n\u003ctd\u003eRGB or RGBW mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e75mm x 43mm x 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.08KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153743UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between RGB and RGBW mode?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRGB mode controls three-colour LED tape (red, green, blue) with 5A output per channel. RGBW mode controls four-colour tape (red, green, blue, white) with 4A output per channel. The controller has a physical selector switch to change between the two modes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the sound activation work without connecting an audio cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The controller has a built-in microphone for sound activation, so it will react to ambient sound in the room without needing to connect the 3.5mm audio input. Connecting a line-level audio source via the 3.5mm jack typically provides more consistent triggering than relying on the microphone alone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat voltage LED tape does this support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe controller accepts 5V, 12V or 24V DC input and will drive LED tape of the same voltage. Match the tape voltage to your power supply voltage. The controller does not convert voltage. If you supply 12V DC, connect 12V LED tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum length of LED tape this can control?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe maximum tape length depends on the tape's current draw per metre. For example, if your RGBW tape draws 1A per metre per channel, the 4A-per-channel limit in RGBW mode supports up to 4 metres. Check your tape's specification and calculate total current draw to avoid exceeding the controller's output rating.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313169522955,"sku":"153.743UK","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153743UK_0.jpg?v=1784891351"},{"product_id":"lyyt-rgbw-led-strip-wifi-touch-wall-controller-12-24v","title":"LYYT RGBW LED Strip WiFi Touch Wall Controller - 12-24V","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT RGBW WiFi controller is a dual-interface LED strip control system combining a WiFi receiver module with a glass touch wall plate, both capable of controlling 12V or 24V RGB and RGBW LED tape. The WiFi module connects to the Tuya smartphone app, enabling remote control, voice commands via Amazon Alexa or Google Assistant, and programmable lighting scenes. The wall plate operates independently via 2.4GHz RF, providing manual control without needing a phone or network connection.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential LED strip installations in kitchens, under-cabinet lighting, cove lighting and entertainment areas, the system handles up to 16A total output across four channels (red, green, blue, white). The WiFi controller sits between the power supply and the LED strip, with screw terminals accepting input from a 12V or 24V DC supply and output connections running to the strip via W\/B\/G\/R\/V+ terminals. The glass wall plate mounts in a standard UK back box and communicates with the receiver module within a 10m range.\u003c\/p\u003e\n\u003cp\u003eThe Tuya app provides eight pre-set lighting effect modes, a sound-to-light function that syncs colour changes to ambient audio, a colour scroll mode, dimming control across all channels, and a timer function for automated on\/off scheduling. The wall plate offers nine additional pre-set effects, independent speed and brightness adjustment via touch buttons, and a dedicated white LED control button for toggling the white channel on RGBW strips. Multiple receiver modules can be paired to the same wall plate for synchronised control across separate LED strip zones.\u003c\/p\u003e\n\u003cp\u003eThe controller module measures 70mm x 40mm x 20mm and weighs 80g, fitting into most concealed installation spaces behind cabinetry or within ceiling voids. The 1.95KHz PWM frequency provides flicker-free dimming across the full brightness range. Power input accepts either a DC5521 barrel jack or direct wire connection via screw terminals, offering compatibility with standard 12V and 24V LED strip power supplies.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e12-24V (16A Max.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connection\u003c\/td\u003e\n\u003ctd\u003eW \/ B \/ G \/ R \/ V+ screw terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower connection\u003c\/td\u003e\n\u003ctd\u003eDC5521 Jack or screw terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePWM frequency\u003c\/td\u003e\n\u003ctd\u003e1.95KHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency\u003c\/td\u003e\n\u003ctd\u003eRF: 2.4GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e20mm x 40mm x 70mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.08KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153896UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with both RGB and RGBW LED strips?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The controller supports both RGB (three-channel) and RGBW (four-channel) LED strips operating at 12V or 24V. When used with RGB strip, the white channel output is not connected. When used with RGBW strip, all four channels are active and the wall plate's dedicated white button controls the separate white LED channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum length of LED strip this can control?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 16A maximum output rating determines strip length depending on the strip's power draw per metre. For typical 12V RGB strip at 14.4W per metre, the controller handles approximately 13 metres. For 24V RGBW strip at 19.2W per metre, it handles approximately 10 metres. Refer to your specific strip's wattage rating and calculate total load to stay within 16A at your supply voltage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the wall plate need mains power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The wall plate is battery-powered and communicates wirelessly with the receiver module via 2.4GHz RF. The receiver module draws power from the 12V or 24V LED strip power supply. The wall plate must be within 10m of the receiver for reliable control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple wall plates control the same LED strip?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, and the reverse is also true. Multiple receiver modules can be paired to the same wall plate for synchronised control across separate LED strip zones. Pairing instructions are in the product manual linked in the Downloads section above.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313171423499,"sku":"153.896UK","price":35.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153896UK_0.jpg?v=1784891627"},{"product_id":"lyyt-12v-rgb-led-strip-light-5m-60-led-m-ip65","title":"LYYT 12V RGB LED Strip Light 5m - 60 LED\/m IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT RGB LED strip is a 5m reel of flexible 12Vdc tape carrying 60 RGB LEDs per metre, with an IP65 epoxy coating and self-adhesive backing. Each Epistar 5050 RGB LED emits red, green and blue individually, allowing the strip to produce any colour when connected to a compatible RGB controller (sold separately). The tape draws 14.4W per metre and delivers 600 lumens per metre across a 140-degree beam angle.\u003c\/p\u003e\n\u003cp\u003eDesigned for accent lighting in homes, vehicles, retail displays, bars and event installations, the strip adheres directly to clean dry surfaces via the 3M-style adhesive backing. The 12mm width and 3mm thickness allow it to fit into narrow channels, under shelving, behind mirrors and around curved surfaces without visible mounting hardware. The IP65 rating protects the LEDs and circuitry from dust and water splashes, making the strip suitable for bathroom mirrors, kitchen plinths and outdoor covered areas where moisture exposure is moderate.\u003c\/p\u003e\n\u003cp\u003eThe strip can be cut at marked 5cm intervals to fit exact lengths, with solder connection accessories supplied in the box for joining cut sections or connecting power feeds. For runs longer than 5m, an RGB amplifier (153.771UK) and splitter (153.900UK) are required to maintain brightness and colour accuracy across the extended length. The strip pairs with AVSL RGB controllers including IR remote models (153.741UK, 153.751UK), DMX (153.777UK, 153.797UK) and WiFi app control (153.896UK), none of which are included.\u003c\/p\u003e\n\u003cp\u003eThe Epistar 5050 LEDs are rated for up to 50,000 hours operational life at 12Vdc. The epoxy coating covers the entire surface of the strip, diffusing individual LED points into a continuous glow and protecting the circuitry from general wear. At 230g for the full 5m reel, the strip adds negligible weight to installations and can be mounted vertically or overhead without sagging.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12Vdc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : type\u003c\/td\u003e\n\u003ctd\u003eEpistar™ RGB5050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReel length\u003c\/td\u003e\n\u003ctd\u003e5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross-section\u003c\/td\u003e\n\u003ctd\u003e12 x 3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam angle\u003c\/td\u003e\n\u003ctd\u003e140°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight intensity per LED (millicandelas)\u003c\/td\u003e\n\u003ctd\u003e6000mcd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.23KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/156720UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the strip include a controller or power supply?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The strip requires a 12Vdc power supply rated for at least 72W (for the full 5m length at 14.4W per metre) and a compatible RGB controller to change colours. AVSL produces IR remote, DMX and WiFi controllers that pair with this strip, all sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the strip be cut to fit a specific length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip has cut marks every 5cm along its length. Cutting at these points preserves the circuit integrity. Solder connection accessories are supplied in the box for joining cut sections or connecting power feeds to custom lengths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating provides protection from dust and water splashes, making the strip suitable for outdoor covered areas such as under eaves, in garden gazebos or pergolas. It is not rated for full immersion or prolonged exposure to heavy rain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the strip powered for runs longer than 5m?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor runs beyond 5m, use an RGB amplifier (153.771UK) and splitter (153.900UK) to maintain brightness and colour consistency. Extension leads of 3m (153.903UK) and 5m (153.905UK) are also available for connecting additional reels without voltage drop.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313200881931,"sku":"156.720UK","price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/156720UK_0.jpg?v=1784893793"},{"product_id":"lyyt-24v-rgbw-led-strip-light-5m-60-led-m-ip65","title":"LYYT 24V RGBW LED Strip Light 5m - 60 LED\/m IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT 24V RGBW LED strip combines full-spectrum RGB colour mixing with a dedicated white LED channel across a 5m reel, with 60 SMD5050 LEDs per metre. Each LED chip contains four diodes. Red, green, blue, and white. Allowing independent control of colour effects and functional white light from the same strip. The IP65 epoxy coating seals the LEDs and PCB against dust and water jets, making the strip suitable for damp environments including bathrooms, outdoor covered areas, and stage setups.\u003c\/p\u003e\n\u003cp\u003eDesigned for both decorative accent lighting and functional task lighting, the strip operates on 24V DC supply and draws 16W per metre at full output. The 5m reel can be cut at 10cm intervals to fit exact installation lengths, with solder connection accessories included for wiring cut sections. The self-adhesive 3M backing fixes the strip to clean, dry surfaces including metal, wood, plaster, and most plastics without additional fixings.\u003c\/p\u003e\n\u003cp\u003eThe strip pairs with compatible RGBW controllers for dimming, colour sequencing, sound-reactive modes, and DMX integration. The 180-degree beam angle from the SMD5050 LEDs provides wide lateral spread suitable for indirect cove lighting, under-cabinet task lighting, and behind-panel wash effects. The 12mm LED spacing gives uniform light distribution without visible hotspots when viewed through frosted diffusers or bounced off surfaces.\u003c\/p\u003e\n\u003cp\u003eThe 24V operating voltage allows longer run lengths than 12V strips before voltage drop becomes noticeable. Up to 5m can be run from a single power feed without requiring an in-line amplifier, though runs beyond 5m will need amplification to maintain consistent brightness across the full length. The low 0.67A per metre current draw keeps cable sizing manageable and reduces heat output compared to higher-wattage strip alternatives.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e24Vdc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam angle\u003c\/td\u003e\n\u003ctd\u003e160°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight intensity per LED (millicandelas)\u003c\/td\u003e\n\u003ctd\u003e1800-2000mcd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : type\u003c\/td\u003e\n\u003ctd\u003eSanan SMD5050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReel length\u003c\/td\u003e\n\u003ctd\u003e5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption per metre\u003c\/td\u003e\n\u003ctd\u003e16W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : quantity per metre\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : spacing\u003c\/td\u003e\n\u003ctd\u003e12mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut points\u003c\/td\u003e\n\u003ctd\u003e10cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour rendering index (CRI, Ra)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e670mA per metre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross-section\u003c\/td\u003e\n\u003ctd\u003e12 x 4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.13KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : colour\u003c\/td\u003e\n\u003ctd\u003eRGB and Cold White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/156772UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between RGB and RGBW?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRGB strips mix red, green and blue LEDs to create colours but produce a bluish or purplish tone when trying to create white light. RGBW strips add a dedicated white LED to each chip, allowing true warm or cool white alongside full colour mixing. This makes RGBW strips suitable for both mood lighting and functional task lighting from the same installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat controller does it need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strip requires a 24V DC RGBW controller to operate. Compatible AVSL controllers include the DMX model (153.778UK), sound-activated controller (153.743UK), and WiFi controller (153.896UK). Each controller provides different control methods. Choose based on whether you need smartphone control, audio reactivity, or DMX integration with other stage lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the strip be cut to length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip can be cut at marked intervals every 10cm along its length. Solder connection accessories are included for wiring cut sections to the power supply or controller. Do not cut between the marked cut points as this will damage the circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs IP65 suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 protects against water jets and dust but is not waterproof against full immersion. The strip is suitable for outdoor covered areas such as under eaves, pergolas, or canopies where it will not be submerged or exposed to direct rainfall. For installations in wet locations, ensure the power supply and controller are also IP65-rated or housed in weatherproof enclosures.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313201799435,"sku":"156.772UK","price":40.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/156772UK_0.jpg?v=1784893849"},{"product_id":"basis-dali-cct-led-dimmable-linear-track-light-for-magnetic-exility-12w-2700-6000k-black","title":"Basis DALI CCT LED Dimmable Linear Track Light for Magnetic Exility 12W 2700-6000K - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Basis is a 304mm linear LED track light built for Maytoni's Magnetic Exility track system, delivering 12W output with DALI-controlled dimming and adjustable colour temperature from warm 2700K to cool 6000K. The matt black aluminium housing holds an integrated LED that can be remotely tuned for colour temperature and intensity via DALI protocol, allowing precise control across multiple fixtures from a single control system.\u003c\/p\u003e\n\u003cp\u003eDesigned for retail displays, gallery walls, office task lighting and residential accent lighting where colour rendering and adjustability matter, the Basis connects magnetically to the Exility 48V DC track and can be repositioned or removed without tools. The linear form projects light in a focused beam along its 304mm length, making it suited to highlighting merchandise, artwork, worksurfaces or architectural features. The DALI dimming provides smooth 0-100% adjustment without flicker, and the tunable white function allows the same fixture to serve as warm ambient light in the evening and cool task light during the day.\u003c\/p\u003e\n\u003cp\u003eThe 22.5mm width and 44mm height keep the profile compact when fitted to track, and the matt black finish integrates cleanly into dark ceilings or contrasts against white. The IP20 rating confines use to dry indoor spaces. The aluminium construction provides passive heat dissipation for the LED, and the 5-year warranty covers both the LED module and the driver electronics.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e30.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e2.25cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eDC 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003eAdjustable colour temperature 2700-6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_TRA004EC-21B.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is DALI dimming and do I need a special controller?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDALI (Digital Addressable Lighting Interface) is a protocol that allows precise, flicker-free dimming and individual control of multiple fixtures from a central controller. You will need a DALI-compatible control system to operate this light — it does not work with standard domestic dimmer switches or rotary dimmers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the colour temperature be changed without a DALI controller?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Both the dimming and the colour temperature adjustment require DALI control signals. The light will operate at a default setting if powered directly, but full functionality requires integration into a DALI lighting system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat track system does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis track light is designed exclusively for Maytoni's Magnetic Exility track system, which runs on 48V DC. It will not fit standard three-circuit track systems or other manufacturers' magnetic tracks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means it is suitable for dry indoor spaces only and must not be installed in areas exposed to moisture, steam or direct water contact.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724957180171,"sku":"TR030-4-12WTW-DD-B","price":72.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_TR030-4-12WTW-DD-B_on_w_standard_f28ac046-227f-482f-982f-83a196fd302e.jpg?v=1737122681"},{"product_id":"basis-cct-12w-led-linear-track-light-for-magnetic-exility-white-2700-6000k-dimmable","title":"Basis CCT 12W LED Linear Track Light for Magnetic Exility - White (2700-6000K Dimmable)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Basis CCT is a 304mm linear track light designed for Maytoni's Magnetic Exility track system, housing a 12W integrated LED with adjustable colour temperature from 2700K warm white to 6000K cool white. The LED output and colour temperature are controlled via Bluetooth Mesh from a smartphone, allowing remote adjustment without wall switches or physical dimmers. The light runs on DC 48V supplied by the track system.\u003c\/p\u003e\n\u003cp\u003eDesigned for task lighting in kitchens, work surfaces, retail displays and office environments, the Basis CCT mounts magnetically onto the Exility track rail and can be repositioned without tools. The 304mm length provides focused linear illumination along worktops, shelving runs or wall-mounted artwork. The white aluminium housing suits minimalist and contemporary interiors where the track system itself is intended to remain visible rather than concealed.\u003c\/p\u003e\n\u003cp\u003eThe aluminium construction includes fins visible on the upper surface of the housing. The IP20 rating limits this fitting to indoor dry environments — not suitable for bathrooms, wet rooms or outdoor use. Maytoni provides a 5-year warranty on the fitting and integrated LED. The Basis CCT requires the Magnetic Exility track system and compatible DC 48V driver (sold separately) to operate.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e30.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e2.2cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eDC 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003eAdjustable colour temperature 2700-6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_TR007-1-18W3K-W4K.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat track system does the Basis CCT require?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis light is designed exclusively for Maytoni's Magnetic Exility track system. It will not fit standard three-circuit track rails or other manufacturers' magnetic track systems. The Exility track and compatible DC 48V driver are sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature and dimming controlled?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth colour temperature (2700K to 6000K) and dimming are controlled via Bluetooth Mesh using a smartphone app. There are no physical switches or knobs on the fitting itself. A compatible Bluetooth Mesh controller is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the light be repositioned once fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Basis CCT attaches magnetically to the Exility track rail and can be slid along the track or removed and repositioned without tools. This allows reconfiguration of the lighting layout as room use changes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathroom use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating limits this fitting to indoor dry environments only. It cannot be used in bathrooms, wet rooms, or any location where moisture or direct water contact is expected.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724957737227,"sku":"TR030-4-12W3K-WW-DS-W","price":79.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_TR030-4-12W3K-WW-DS-W_on_w_standard_0a0b0830-15e2-4785-97a0-a4caa745f4ac.jpg?v=1737122680"},{"product_id":"basis-cct-24w-led-linear-track-light-2700-6000k-dimmable-black-magnetic-exility","title":"Basis CCT 24W LED Linear Track Light 2700-6000K Dimmable - Black Magnetic Exility","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Basis CCT is a 604mm linear track light with an integrated 24W LED strip, adjustable colour temperature from 2700K warm white to 6000K cool white, and Bluetooth Mesh app control. The fitting mounts onto Maytoni's Magnetic Exility track system via a magnetic connector running 48V DC, eliminating the need for traditional track clips or mechanical fixing points.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchens, home offices, retail display areas and galleries where task lighting or accent lighting requires directional control, the linear format throws light forward in a narrow beam rather than spreading it omni-directionally. The 604mm length covers approximately 600mm of linear run along a worktop, shelving unit or wall display, making it suitable for island counters, desk runs and feature walls needing targeted illumination without ambient spill. The Bluetooth Mesh app allows colour temperature and dimming to be adjusted per fitting or grouped across multiple Basis units on the same circuit.\u003c\/p\u003e\n\u003cp\u003eThe aluminium housing is finished in matt black powder coat with a white polycarbonate diffuser along the underside, giving even light distribution along the 604mm run without visible LED hotspots. The magnetic mounting system means the Basis can be repositioned along the Exility track without tools, allowing reconfiguration as room layouts change. The 48V DC supply runs through the track itself rather than requiring mains voltage at each fitting position, simplifying installation and giving greater flexibility for multi-fitting layouts.\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating limits use to dry interior environments. The integrated LED is non-replaceable but carries a 5-year warranty covering electronic driver and LED failure under normal residential or light commercial use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e60.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e2.2cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eDC 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003eAdjustable colour temperature 2700-6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_TRA004SW-21S.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat track system does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Basis CCT fits only the Maytoni Magnetic Exility track system. It uses a magnetic connector and 48V DC supply running through the track, so it will not fit standard mains-voltage track lighting systems from other manufacturers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eColour temperature and dimming are controlled via the Bluetooth Mesh app on iOS or Android. The app connects to the Basis fitting when within Bluetooth range (approximately 10m), allowing you to adjust from warm 2700K to cool 6000K and set brightness levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the fitting be repositioned along the track?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The magnetic mounting system allows the Basis to be moved along the Exility track without tools. Power is delivered continuously along the track, so the fitting reconnects automatically when repositioned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the LED replaceable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The 24W LED strip is integrated into the fitting and cannot be replaced separately. The entire unit carries a 5-year warranty covering LED and driver failure.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724961800459,"sku":"TR030-4-24W3K-WW-DS-B","price":90.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_TR030-4-24W3K-WW-DS-B_on_w_standard_4d0b5992-8d4a-47d0-a879-3454d3258544.jpg?v=1737122673"},{"product_id":"basis-dali-cct-led-linear-track-light-24w-2700-6000k-black-magnetic-exility","title":"Basis DALI CCT LED Linear Track Light 24W 2700-6000K - Black (Magnetic Exility)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Basis is a 60cm linear track light with an integrated 24W LED, DALI dimming control, and adjustable colour temperature from 2700K to 6000K. Built from black-finished aluminium, the fitting mounts onto the Maytoni Magnetic Exility track system using magnetic attachment, allowing the light to be repositioned along the track without tools.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial and residential installations where tunable white light is needed, the Basis suits office desks, retail display runs, kitchen worktops, and gallery walls. The DALI protocol allows individual control of each fitting from a DALI controller or lighting management system, enabling different zones to run at different brightness levels or colour temperatures on the same track. The adjustable colour temperature means the fitting can shift from warm 2700K (amber-white, similar to tungsten) to cool 6000K (daylight-white) depending on task requirements or time of day.\u003c\/p\u003e\n\u003cp\u003eThe linear form measures 604mm long by 44mm high by 23mm wide, giving a low-profile presence against ceilings or walls when mounted on the Exility track. The black aluminium body conceals the driver and LED strip, with light emitting from the underside through a diffuser that softens the LED array into a continuous line rather than individual points. The magnetic mounting to the Exility track means the fitting can be slid along the track run and locked in position without re-wiring, making reconfiguration straightforward as room layouts change.\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating limits the fitting to dry indoor use. The 48V DC supply runs through the Exility track itself, so each fitting draws power magnetically from the track rather than needing individual mains wiring. The aluminium construction dissipates heat efficiently, extending LED lifespan and maintaining stable light output over the 5-year warranty period.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e60.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e2.3cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eDC 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003eAdjustable colour temperature 2700-6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_TRA004C-21S.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is DALI dimming and do I need a special controller?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDALI is a digital lighting control protocol that allows individual addressing of each fitting on a circuit. You need a DALI-compatible controller or lighting management system to control brightness and colour temperature. Without DALI control, the fitting cannot be adjusted and will not function on standard mains dimmer switches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be fitted to any track system?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The Basis is designed specifically for the Maytoni Magnetic Exility track system and attaches magnetically to that track. It will not fit standard 3-circuit or single-circuit track systems from other manufacturers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat colour temperature range does it cover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LED can be adjusted from 2700K (warm white, similar to tungsten bulbs) to 6000K (cool daylight white). The colour temperature is controlled via the DALI system, allowing it to be set to any point in that range depending on the task or time of day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms or kitchens near sinks?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It is rated IP20, so it is for dry rooms only.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724962226443,"sku":"TR030-4-24WTW-DD-B","price":90.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_TR030-4-24WTW-DD-B_on_w_standard_b9a52dbd-a0ff-4314-bc09-8e9c92a3beaf.jpg?v=1737122672"},{"product_id":"basis-90-linear-track-light-led-dimmable-cct-24w-black-magnetic-exility","title":"Basis 90° Linear Track Light LED Dimmable CCT 24W - Black Magnetic Exility","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Maytoni Basis is a 90° L-shaped linear track light with an integrated 24W LED and adjustable colour temperature from 3000K warm white to 6000K cool white, designed to mount onto Maytoni's Magnetic Exility track system. The aluminium body forms a right-angled profile measuring 321mm along each leg, with a 44mm body depth, and emits light from the internal edge of the L-shape to create linear illumination along two perpendicular planes.\u003c\/p\u003e\n\u003cp\u003eDesigned for retail, gallery and residential spaces where directional accent lighting is needed without traditional spotlights, the 90° profile allows light to be positioned in corners, along edges of shelving units, or to frame architectural features such as alcoves or recessed panels. The Bluetooth Mesh control enables wireless dimming and colour temperature adjustment from a smartphone without requiring additional wall-mounted dimmers. The DC 48V low-voltage operation means the fitting runs on a compatible Magnetic Exility driver (sold separately) rather than direct mains connection.\u003c\/p\u003e\n\u003cp\u003eThe black powder-coated aluminium finish provides a matt surface that sits flush against walls or ceiling planes when corner-mounted on the magnetic track. The IP20 rating restricts use to dry interior spaces. The adjustable colour temperature gives flexibility to shift from warm white task lighting in the morning to cooler white focused light for detailed work, or to match the output to other LED fixtures in the same room. The 3-year manufacturer warranty covers the integrated LED and control electronics.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e32.1cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e32.1cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eDC 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003eAdjustable colour temperature 3000-6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e3000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_TRX001-111W__1.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Magnetic Exility system?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMagnetic Exility is Maytoni's modular low-voltage track lighting system. Track sections are fixed to walls or ceilings, and compatible fittings like the Basis attach magnetically to the track for easy positioning and repositioning without tools. A separate driver (not included) powers the DC 48V track.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the colour temperature be changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The integrated LED offers adjustable colour temperature from 3000K warm white to 6000K cool white, controlled via the Bluetooth Mesh app on a smartphone. This allows you to shift the light tone to suit different tasks or times of day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Dimming is controlled wirelessly through the Bluetooth Mesh app, so no separate wall dimmer is required. The light intensity can be adjusted from full 24W output down to a low ambient level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the fitting is suitable for dry interior spaces only. It cannot be used in bathrooms, kitchens near sinks, or any environment where moisture or water contact is present.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724964225291,"sku":"TR102-24W-DS-B-1","price":94.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_TR102-24W-DS-B-1_on_w_standard_d674ec7e-800b-4274-9f1a-3dcd20554c0c.jpg?v=1737122669"},{"product_id":"parete-12w-led-dimmable-linear-track-light-2700-6000k-white","title":"Parete 12W LED Dimmable Linear Track Light 2700-6000K - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Parete is a 219mm linear LED track light housing a 12W integrated LED with adjustable colour temperature from warm 2700K to cool 6000K, controlled via Bluetooth Mesh. The fitting mounts onto Maytoni's magnetic Exility track system (sold separately) and uses wall-washer optics to project a smooth wash of light across vertical surfaces rather than spotlighting a single point.\u003c\/p\u003e\n\u003cp\u003eDesigned for accent lighting on feature walls, artwork, retail displays and architectural detailing, the Parete suits galleries, hospitality spaces, retail environments and residential rooms where wall illumination is needed without visible ceiling downlights. The magnetic track allows the fitting to be repositioned along the track run without rewiring, so lighting layouts can be adjusted after installation. The 48V DC low-voltage operation requires a compatible Exility track with integrated power supply.\u003c\/p\u003e\n\u003cp\u003eThe white aluminium housing measures 219mm long by 46mm deep by 22mm wide, giving a low-profile presence on the track. The wall-washer optics create two sections of light distribution, spreading the 12W output evenly across a wider vertical surface area than a conventional spotlight. Bluetooth Mesh dimming allows brightness adjustment via smartphone app or compatible control system, with no additional dimmer switch required. The IP20 rating limits use to dry indoor environments.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e21.9cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e2.2cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eDC 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003eAdjustable colour temperature 2700-6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_MOD545WL-03G.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with standard track lighting systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The Parete is designed specifically for Maytoni's magnetic Exility track system and operates on 48V DC power. It will not fit or work with standard mains-voltage 3-circuit track systems. The compatible Exility track must be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe colour temperature adjusts via Bluetooth Mesh control using a smartphone app or compatible control system. The LED can be set anywhere between warm white 2700K and cool white 6000K. No physical switches on the fitting itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does wall-washer optics mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWall-washer optics spread light across a vertical surface rather than creating a focused spotlight. The Parete produces a smooth wash of light ideal for illuminating feature walls, artwork or architectural details without visible hotspots.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating limits use to dry indoor environments only. It is not suitable for bathrooms, wet rooms or any location where moisture or water spray is present.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724973072651,"sku":"TR106-4-12W-DS-W","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_TR106-4-12W-DS-W_on_w_standard_0f6285ff-4c61-42ef-a97f-de1eef471a57.jpg?v=1737122658"},{"product_id":"parete-18w-cct-led-linear-track-light-magnetic-exility-system-black","title":"Parete 18W CCT LED Linear Track Light - Magnetic Exility System - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Parete is an 18W LED linear track light designed for Maytoni's Exility magnetic track system, measuring 326mm long in a black aluminium housing. The integrated LED strips deliver wall-wash optics across three sections, with adjustable colour temperature ranging from warm 2700K through to cool 6000K daylight. Dimming is controlled via Bluetooth Mesh, allowing remote adjustment of both brightness and colour temperature without additional wall switches or controllers.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial interiors where accent lighting or wall washing is needed on a flexible track grid, the Parete suits gallery walls, retail displays, feature walls in living rooms, and corridor lighting in hospitality settings. The magnetic mounting clips onto Exility track without tools, and the fitting can be repositioned along the track run as layouts change. The DC 48V supply runs through the track itself, so there's no visible wiring between the track and the light fitting.\u003c\/p\u003e\n\u003cp\u003eThe aluminium body measures 46mm tall and 22mm wide, giving the fitting a low-profile appearance when mounted to the track. The high CRI LED output renders colours accurately under both warm and cool settings, making the fitting suitable for accent lighting over artwork, textured walls or retail product displays. The IP20 rating limits the Parete to dry indoor locations only. Maytoni backs the fitting with a 5-year warranty covering LED driver and housing.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e32.6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e2.2cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eDC 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003eAdjustable colour temperature 2700-6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_P010PL-L23B4K.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with standard UK track lighting systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The Parete is designed specifically for Maytoni's Exility magnetic track system, which runs on DC 48V. It will not fit or work with standard UK mains-voltage track systems from other manufacturers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe colour temperature and dimming are controlled via Bluetooth Mesh using a compatible app or remote control. You can adjust the output from warm 2700K through to cool 6000K daylight, and dim the brightness from 0-100%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the light be repositioned on the track after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The magnetic mounting allows the fitting to be moved along the Exility track without tools. This makes it straightforward to reposition lights as room layouts or display requirements change.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the beam pattern?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Parete uses wall-wash optics across three LED sections, designed to deliver even light distribution down a vertical surface rather than a focused spot. This makes it suitable for washing feature walls, artwork and textured surfaces with uniform light.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724973793547,"sku":"TR106-4-18W-DS-B","price":76.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_TR106-4-18W-DS-B_on_w_standard_52820788-e22e-4b5c-9bd6-3b95d11c88d7.jpg?v=1737122657"},{"product_id":"points-12w-cct-adjustable-linear-track-light-black-magnetic","title":"Points 12W CCT Adjustable Linear Track Light - Black (Magnetic)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Points is a 220mm linear track light housing a concealed 12W LED with adjustable colour temperature from 2700K warm white to 6000K cool white. The black aluminium body mounts onto Maytoni's magnetic Exility track system via a recessed connector at the top, allowing the light to be repositioned along the track without tools. A 36° beam angle concentrates the output into a controlled wash suitable for accent lighting, wall grazing and task illumination.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial galleries, retail displays, home offices and kitchen worktops where directed light is needed, the Points pairs with Maytoni's magnetic track infrastructure to create flexible multi-point lighting layouts. The colour temperature adjustment is controlled remotely or via compatible voice systems, allowing the same fitting to shift from warm ambient light in the evening to cooler task light during the day. The recessed LED position minimises glare when viewed from typical eye level, keeping focus on the illuminated surface rather than the light source.\u003c\/p\u003e\n\u003cp\u003eThe 220mm length and 22mm width give the fitting a linear profile that sits close to the track ceiling plane without projecting downwards like a traditional spotlight. The black anodised aluminium finish absorbs surrounding light and pairs with both industrial and contemporary interiors. The dimming function operates via the same remote or voice control as the colour temperature adjustment, giving full control over both intensity and tone from a single interface.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e22cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e2.2cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eDC 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003eAdjustable colour temperature 2700-6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_TRA004DR-100S.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat track system does this work with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Points is designed for Maytoni's magnetic Exility track system and mounts via a recessed magnetic connector. It will not fit standard 3-circuit track rails or other manufacturers' magnetic systems without an adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eColour temperature adjustment from 2700K to 6000K is controlled remotely or via compatible voice control systems. The specific remote model compatible with this fitting is detailed in the product manual linked in the Downloads tab.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Dimming is controlled via the same remote or voice system as the colour temperature adjustment. The 12W LED dims smoothly without flicker when paired with compatible controllers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat beam angle does it produce?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Points produces a 36° beam angle, concentrating the 12W output into a controlled wash suitable for accent lighting, task illumination and wall grazing rather than general ambient lighting.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724979659019,"sku":"TR031-4-12W3K-S-DS-B","price":79.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/TR031-4-12W3K-S-DS-B_on_w_standard_4c409a20-6a06-495d-8ab4-90a2547e17f2.jpg?v=1737122651"},{"product_id":"points-dali-cct-led-dimmable-linear-track-light-for-magnetic-track-12w-2700-6000k-black","title":"Points DALI CCT LED Dimmable Linear Track Light for Magnetic Track 12W 2700-6000K - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Points is a 220mm linear track light with an integrated 12W LED, DALI dimming control, and adjustable colour temperature from warm 2700K to cool 6000K. The black aluminium housing contains a recessed LED array that casts a 36° focused beam, designed to highlight specific zones, artworks, or architectural details without spilling light across adjacent surfaces. The fixture mounts onto magnetic track systems via a concealed connector at the top of the housing.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial retail, galleries, offices, and residential spaces where lighting needs shift throughout the day, the DALI protocol allows both brightness and colour temperature to be controlled independently from a DALI-compatible control system. This means you can dim the light to 10% output at warm 2700K for evening ambience, then switch to full brightness at 6000K for daytime task lighting, all from a single fixture. The 36° beam angle suits accent lighting and directional task lighting rather than broad area coverage.\u003c\/p\u003e\n\u003cp\u003eThe recessed LED positioning keeps glare low when the fixture is mounted at typical ceiling heights of 2.4-3m, and the black aluminium finish absorbs rather than reflects ambient light, keeping the fixture visually subtle when not in use. The magnetic track mount allows the fixture to be repositioned along the track without tools, making it straightforward to adjust layouts as room use changes. The 48V DC supply voltage is typical for magnetic track systems and isolates the low-voltage track from mains wiring at the driver end.\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating limits use to dry indoor environments. The 5-year warranty covers the integrated LED and control electronics. The aluminium construction dissipates heat effectively, extending LED lifespan compared to plastic-housed equivalents. At 220mm length and 23mm width, the fixture maintains a low profile on the track without protruding significantly below the ceiling plane.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e22cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e2.3cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eDC 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003eAdjustable colour temperature 2700-6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/Instruction_System_EN_TRX034DR4-200W-1__1.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is DALI dimming and why does it matter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDALI (Digital Addressable Lighting Interface) is a lighting control protocol that allows each fixture to be controlled individually over a digital bus. Unlike standard dimming, DALI lets you adjust both brightness and colour temperature independently, program scenes, and integrate with building automation systems. You need a DALI-compatible control system to use this feature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat magnetic track system does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Points is designed for Maytoni's Exility magnetic track system. The fixture uses a concealed magnetic connector at the top of the housing that clips onto the track. Compatibility with other brands' magnetic track systems is not guaranteed and should be verified before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the colour temperature be changed without a DALI controller?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adjustable colour temperature function requires a DALI control system. Without DALI control, the fixture will operate at a fixed colour temperature determined by the last setting or factory default.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the actual light output at 12W?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMaytoni has not published lumen output for this model in the provided specification. Typical 12W track lights with similar beam angles produce 800-1100 lumens, but contact us for confirmed photometric data if this is critical to your application.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724980281611,"sku":"TR031-4-12WTW-DD-B","price":89.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_TR031-4-12WTW-DD-B_on_w_standard_f89f54a5-b161-47f3-ac44-dacb084d721a.jpg?v=1737122650"},{"product_id":"points-cct-12w-led-dimmable-linear-track-light-2700-6000k-white","title":"Points CCT 12W LED Dimmable Linear Track Light 2700-6000K - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Points CCT is a 220mm linear track light housing a 12W integrated LED with adjustable colour temperature ranging from warm 2700K to cool 6000K. The white powder-coated aluminium body contains recessed optics that focus the LED output into a 36° beam angle, designed for accent lighting rather than ambient coverage. The light mounts onto Maytoni's magnetic Exility track system using a concealed magnetic coupling.\u003c\/p\u003e\n\u003cp\u003eIntended for retail, gallery, residential and hospitality environments where accent lighting is needed on track infrastructure, the Points CCT gives flexibility to reposition spotlights along the track length without re-wiring. The adjustable colour temperature allows the same fitting to deliver warm light for product displays in fashion retail or hospitality, and cooler light for commercial and task-focused environments. The dimming function is controlled via compatible app or voice assistant integration (requires compatible magnetic track controller, sold separately).\u003c\/p\u003e\n\u003cp\u003eThe recessed LED sits behind the aluminium aperture plane, reducing direct glare when viewed from typical standing or seated positions. The 220mm body length and 22mm width keep the fitting visually compact on the track, so multiple units can be clustered without overwhelming the ceiling line. The white finish integrates with white or light-neutral ceilings in contemporary, Scandinavian and minimalist interiors. The IP20 rating restricts use to dry interior locations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e22cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e2.2cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eDC 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003eAdjustable colour temperature 2700-6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_TRA004DR-200S.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with standard track lighting rails?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The Points CCT is designed exclusively for Maytoni's magnetic Exility track system and uses a magnetic coupling rather than traditional track adaptors. It will not fit onto three-circuit track, single-circuit track, or other manufacturers' magnetic systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eColour temperature adjustment requires a compatible magnetic track controller (sold separately) that supports app or voice control. The light itself does not have manual switches — all control is handled through the track system's controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the beam angle suited for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 36° beam angle is relatively tight, designed for accent lighting on artwork, retail displays, architectural details, or task surfaces. It is not a flood beam — it creates defined pools of light rather than broad coverage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple units be installed on one track?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Exility magnetic track system supports multiple Points CCT fittings along its length, limited only by the total wattage capacity of the track controller and power supply. Each unit draws 12W at DC 48V.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724980805899,"sku":"TR031-4-12W3K-S-DS-W","price":79.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_TR031-4-12W3K-S-DS-W_on_w_standard_23bd515f-e3aa-4677-99cf-5339218e947d.jpg?v=1737122649"},{"product_id":"points-dali-cct-led-dimmable-magnetic-track-light-12w-2700-6000k-white","title":"Points DALI CCT LED Dimmable Magnetic Track Light 12W 2700-6000K - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Maytoni Points is a 220mm linear track light housing a 12W integrated LED with adjustable colour temperature from warm 2700K to cool daylight 6000K, controlled via DALI protocol. The white powder-coated aluminium body mounts onto Maytoni's magnetic Exility track system using a magnetic coupling rather than traditional fixed track clips, allowing the light to be repositioned along the track without tools or re-wiring.\u003c\/p\u003e\n\u003cp\u003eDesigned for accent and task lighting in kitchens, home offices, retail displays and gallery walls, the 36° beam angle concentrates light onto surfaces 1-2m below the track, making it suited to highlighting worktops, merchandise, artwork or architectural detail. The DALI dimming gives smooth control from 1-100% brightness and allows colour temperature adjustment without changing bulbs, so the same fitting can shift from warm evening lighting to bright task light during working hours. The recessed LED source sits behind the aluminium bezel, reducing direct glare when viewed from below.\u003c\/p\u003e\n\u003cp\u003eThe white finish pairs with ceiling-mounted or suspended track installations in contemporary interiors where visible track systems are part of the design intent. The 48V DC input requires a compatible Maytoni track driver (sold separately). The aluminium construction and IP20 rating suit dry indoor environments. The magnetic coupling means the light can be moved or removed for redecorating without disturbing the track wiring, and additional Points modules can be added to the same track run to extend coverage as room layouts change.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e22cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e2.3cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eDC 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003eAdjustable colour temperature 2700-6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/Instruction_System_EN_TRX034DR4-100W-1__1.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is DALI dimming and do I need a special controller?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDALI is a digital lighting protocol allowing precise control of brightness and colour temperature via compatible controllers. You need a DALI-compatible control system to access these features. Without a DALI controller, the light operates at full brightness and default colour temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this include the track or do I need to buy that separately?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Points is the light module only. It requires a Maytoni Exility magnetic track system (sold separately) and a compatible 48V DC track driver to operate. The track, driver and any required suspension cables or mounting hardware are separate purchases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I reposition the light after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The magnetic coupling allows the Points module to be moved along the track without tools or re-wiring. Simply slide it to a new position or remove it entirely for cleaning or redecorating, then snap it back into place when needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between 2700K and 6000K?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2700K produces a warm white light similar to traditional incandescent bulbs, suited to living spaces and evening use. 6000K is a cool daylight white that mimics midday natural light, preferred for task lighting in offices or kitchens. The Points allows you to adjust between these extremes via DALI control.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724981559563,"sku":"TR031-4-12WTW-DD-W","price":89.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_TR031-4-12WTW-DD-W_on_w_standard_ebff9a99-9a24-45b3-b14c-2679d918c8ba.jpg?v=1737122648"},{"product_id":"points-cct-led-dimmable-linear-track-light-for-magnetic-exility-18w-2700-6000k-black","title":"Points CCT LED Dimmable Linear Track Light for Magnetic Exility 18W 2700-6000K - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Maytoni Points is a 327mm linear track light housing an 18W integrated LED module with adjustable colour temperature from warm 2700K through to cool 6000K, controlled via app or voice assistant. The aluminium body clips onto Maytoni's magnetic Exility track system running at 48V DC, with the LED positioned behind a recessed anti-glare aperture that produces a focused 36° beam angle.\u003c\/p\u003e\n\u003cp\u003eDesigned for retail display, gallery lighting and residential accent lighting where directional control and colour flexibility matter, the Points suits installations where colour temperature needs to shift between warm evening ambience and cooler task-focused lighting during daytime. The magnetic track mounting allows the light to be repositioned along the track length without tools or re-wiring, making it practical for frequently rearranged displays or evolving room layouts. The 36° beam concentrates light onto specific objects or surfaces rather than providing wide area coverage.\u003c\/p\u003e\n\u003cp\u003eThe black aluminium body measures 44mm tall and 22mm wide, giving a linear profile that sits close to the track without projection into the room. The recessed LED source minimises direct glare when viewed from typical standing or seated positions, directing light outward from the fixture rather than back towards the eye. The IP20 rating restricts use to dry indoor environments. The 48V DC supply runs through the magnetic track system itself, so no additional transformers or drivers are needed at each individual light position once the track infrastructure is installed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e32.7cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e2.2cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eDC 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003eAdjustable colour temperature 2700-6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_TRA004DR-150S.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat track system does the Points fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Points is designed specifically for Maytoni's magnetic Exility track system running at 48V DC. It clips onto the track via magnetic connection and cannot be used with standard 240V mains track systems or other manufacturers' magnetic tracks without compatibility verification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eColour temperature adjustment from 2700K to 6000K requires app or voice control via the compatible Maytoni control system. The fixture does not include manual switches or physical controls for colour temperature selection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs dimming available without the app?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming control is integrated into the app and voice control system. Check the Maytoni Exility track controller specification to confirm whether manual dimming controls are available at the track power supply level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the light be repositioned after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The magnetic mounting allows the Points to be moved along the track length without tools or re-wiring, making it practical for evolving displays or room layouts where lighting positions need to change over time.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724985000203,"sku":"TR031-4-18W3K-S-DS-B","price":90.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/TR031-4-18W3K-S-DS-B_on_w_standard_7264e76d-2552-4782-965b-a0bc83bd2c1e.jpg?v=1737122644"},{"product_id":"points-dali-cct-led-linear-track-light-18w-2700-6000k-magnetic-black","title":"Points DALI CCT LED Linear Track Light 18W 2700-6000K Magnetic - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Maytoni Points is a 327mm linear LED track light with an integrated 18W LED and adjustable colour temperature between 2700K warm white and 6000K cool white. The fitting mounts onto Maytoni's magnetic Exility track system via a magnetic clip-on connector, allowing it to be repositioned along the track without tools. The black aluminium body houses the LED array and DALI dimming driver behind a recessed aperture that directs light through a 36° beam angle.\u003c\/p\u003e\n\u003cp\u003eDesigned for task and accent lighting in retail, gallery, kitchen and workspace installations, the Points allows colour temperature and brightness to be adjusted via a DALI controller. This makes it suitable for environments where lighting needs change throughout the day — warm white for evening residential use, cool white for daytime task lighting, or mid-tones for product display. The recessed LED position reduces direct glare, and the narrow beam provides concentrated light on surfaces below without wash spill into adjacent areas.\u003c\/p\u003e\n\u003cp\u003eThe aluminium construction dissipates heat from the 18W LED, and the IP20 rating limits the fitting to interior dry locations. The magnetic track connection requires Maytoni's Exility magnetic track system (sold separately), which operates on 48V DC. The track itself is powered by a separate driver that connects to mains, while the Points fitting draws 48V DC from the track. The 327mm length allows multiple fittings to be arranged in sequence or staggered positions along a single track run, creating linear lighting layouts without visible cabling between fittings.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e32.7cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e2.3cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eDC 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003eAdjustable colour temperature 2700-6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/Instruction_System_EN_TRX034DR4-100B-1__2.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat track system does this work with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Points is designed for Maytoni's Exility magnetic track system only. It will not fit standard 3-circuit track rails or other manufacturers' magnetic tracks. The Exility track and power supply must be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature and dimming controlled?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires a DALI controller to adjust brightness and colour temperature. DALI is a digital lighting control protocol — you cannot adjust these features with a standard wall dimmer. The DALI controller connects to the track power supply and communicates with individual fittings via the track.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the beam angle and light output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 36° beam provides focused downlight suitable for task lighting and accent lighting. The 18W LED output will vary depending on the selected colour temperature, with warm white typically producing lower lumens than cool white at the same wattage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple fittings be used on one track?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Exility track can support multiple Points fittings along its length, each individually controllable via DALI if the controller supports multi-zone addressing. Consult the track power supply's maximum load rating to determine how many 18W fittings can be safely installed on a single track run.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724985590027,"sku":"TR031-4-18WTW-DD-B","price":106.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_TR031-4-18WTW-DD-B_on_w_standard_74cce3ff-bcd8-450f-ae7a-38c79de78c97.jpg?v=1737122643"},{"product_id":"points-18w-led-linear-track-light-magnetic-white-cct-adjustable-dimmable","title":"Points 18W LED Linear Track Light Magnetic - White CCT Adjustable Dimmable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Maytoni Points is a 327mm linear LED track light designed for magnetic rail systems, delivering 18W through integrated LEDs with adjustable colour temperature from warm 2700K to cool 6000K. The white aluminium housing measures 44mm high by 22mm wide, with recessed optics that direct light through a 36° beam angle while keeping the LED source concealed from view.\u003c\/p\u003e\n\u003cp\u003eBuilt for kitchens, home offices, retail display runs and gallery walls where directed accent or task lighting is needed, the Points fits Maytoni's Exility magnetic track system (sold separately). The magnetic attachment allows the fitting to be repositioned along the track without tools, making it straightforward to adjust lighting layout as room use changes. The fixture runs on 48V DC supplied by the track system itself, so there's no separate driver or transformer required at each fitting point.\u003c\/p\u003e\n\u003cp\u003eThe adjustable colour temperature is controlled via app or voice command, allowing the same fitting to provide warm ambient light at 2700K for evening use or bright cool white at 5000-6000K for task work. Dimming control is also integrated, giving full range adjustment from maximum output down to low background levels. The IP20 rating suits dry interior environments and the aluminium construction with white powder-coat finish provides a clean, minimal profile that sits close to the ceiling plane.\u003c\/p\u003e\n\u003cp\u003eThe recessed optics reduce direct glare by keeping the LED array set back within the housing, so the fitting can be installed above eye level without creating discomfort for people seated or standing below. The 5-year manufacturer warranty covers the integrated LED and the electronic components within the housing.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e32.7cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e2.2cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eDC 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003eAdjustable colour temperature 2700-6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_TR020-1-GU10-W.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat track system does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Points is designed for Maytoni's Exility magnetic track system. It attaches magnetically to the track and draws 48V DC power from the rail itself, so no separate wiring or driver is needed at each fitting point. The track system is sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CCT adjustment and dimming are controlled via the Maytoni app or through voice commands (compatible smart home systems required). You can switch between warm 2700K, neutral 4000K, and cool 6000K, or any point in between, depending on the room's use and time of day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the fitting be repositioned once installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The magnetic attachment allows the Points to be moved along the Exility track without tools. This makes it straightforward to adjust the lighting layout as furniture or room use changes, without needing to re-wire or drill new mounting points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the fitting is designed for dry interior environments only and should not be installed in bathrooms or other areas where it may be exposed to moisture or water splashes.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724986310923,"sku":"TR031-4-18W3K-S-DS-W","price":90.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_TR031-4-18W3K-S-DS-W_on_w_standard_d21aa607-d3dd-4112-a389-52ad2ed3bf18.jpg?v=1737122642"},{"product_id":"points-dali-cct-led-linear-track-light-24w-2700-6000k-white","title":"Points DALI CCT LED Linear Track Light 24W 2700-6000K - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Maytoni Points is a 43cm linear track light with integrated 24W LED, DALI dimming control, and adjustable colour temperature from 2700K to 6000K. The white aluminium body houses a recessed LED array that delivers focused light through a 36° beam angle, designed to mount onto Maytoni's magnetic Exility track system using a magnetic connection rather than traditional track clips.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, retail and hospitality applications where lighting colour and intensity need to adapt throughout the day, the Points supports DALI protocol control, allowing both brightness and colour temperature to be adjusted via compatible control systems, remotes or voice assistants. The 2700K setting provides warm residential lighting similar to halogen, while the 6000K setting delivers cooler, daylight-balanced light for task work or product display. The recessed LED positioning reduces direct glare, making the fitting suitable for eye-level installation in kitchens, dining areas, galleries and office environments.\u003c\/p\u003e\n\u003cp\u003eThe aluminium construction keeps weight down to approximately 0.5kg while maintaining rigidity on the track mount. The 48V DC supply voltage (provided by the Exility track system) allows multiple Points fittings to be run from a single driver without individual wiring to each light. The magnetic attachment means the fitting can be repositioned along the track length without tools, and the 36° beam provides defined pools of light rather than wide wash, making it effective for highlighting worktops, dining tables, artwork or merchandise. The IP20 rating restricts use to dry indoor environments.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e43.1cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e2.3cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eDC 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003eAdjustable colour temperature 2700-6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_TR103-1-5W4K-M-W.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat track system does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Points is designed specifically for Maytoni's magnetic Exility track system and attaches via magnetic connection. It will not fit standard three-circuit track or other manufacturers' magnetic track without an adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eColour temperature is controlled via DALI protocol using a compatible DALI controller, remote or app-based system connected to the Exility track's DALI bus. The fitting cannot be adjusted manually without a DALI control device.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple Points be run from one driver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Exility track system runs at 48V DC and supplies power to all connected fittings from a single driver. The driver capacity determines how many Points can be installed on one track run — consult the Exility track specification for maximum combined wattage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat beam angle does it provide?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Points has a 36° beam angle, producing defined pools of light rather than wide flood. This makes it effective for highlighting specific areas such as worktops, dining tables or display shelves rather than providing broad ambient lighting.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724988244235,"sku":"TR031-4-24WTW-DD-W","price":125.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_TR031-4-24WTW-DD-W_on_w_standard_8e05d904-3600-4597-b223-2f47c1fa7a86.jpg?v=1737122639"},{"product_id":"elti-12w-led-magnetic-track-spotlight-cct-dimmable-2700-6000k-black-brass","title":"Elti 12W LED Magnetic Track Spotlight CCT Dimmable 2700-6000K - Black \u0026 Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Elti is a 12W LED magnetic track spotlight with adjustable colour temperature from 2700K warm white to 6000K cool white, housed in a cylindrical aluminium body with a brass finish and black magnetic mount. The spotlight clips onto Maytoni's Exility magnetic track system (sold separately) and runs on DC 48V low voltage supplied through the track.\u003c\/p\u003e\n\u003cp\u003eDesigned for accent lighting in galleries, retail displays, home offices and living rooms, the Elti's rotary mechanism allows the spotlight to be angled after installation to highlight artwork, shelving, feature walls or task surfaces. The recessed LED source sits behind a textured diffuser that softens the beam edge and reduces glare compared to open reflector spotlights. The magnetic mounting means the spotlight can be repositioned along the track without tools.\u003c\/p\u003e\n\u003cp\u003eThe brass cylinder body contrasts with the matt black track mount and provides a warm metallic accent in both contemporary and traditional interiors. The adjustable colour temperature is controlled via Bluetooth Mesh protocol using a compatible app or controller (sold separately), allowing the light to shift from warm amber tones at 2700K for evening ambient lighting to cooler daylight tones at 6000K for focused task work. Dimming is also controlled via Bluetooth, with no need for wall-mounted dimmer switches.\u003c\/p\u003e\n\u003cp\u003eThe spotlight measures 232mm in total height including the mount, with a 52mm diameter cylindrical head and a 160mm width across the magnetic mounting plate. The aluminium construction keeps the weight low while dissipating heat from the 12W LED. The IP20 rating limits use to dry indoor environments only.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e23.2cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e19.3cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e5.2cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack \u0026amp; brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eDC 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003eAdjustable colour temperature 2700-6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Colour Temperature\u003c\/td\u003e\n\u003ctd\u003e6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_O050FL-L30W3K.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat track system does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Elti is designed for Maytoni's Exility magnetic track system and attaches via the magnetic mounting plate shown in black. It will not fit standard 3-circuit track or other manufacturers' magnetic track systems. The track itself is sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature and dimming controlled?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth colour temperature (2700K to 6000K) and dimming are controlled via Bluetooth Mesh protocol using a compatible smartphone app or dedicated controller. No wall-mounted dimmer switch is required, but you will need a Bluetooth-compatible device to adjust settings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the spotlight be angled after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The rotary mechanism allows the spotlight head to be tilted and rotated to direct light where needed. Once clipped onto the track, the spotlight can be angled by hand without tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat voltage does the track supply?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Elti runs on DC 48V low voltage supplied through the Exility track. The track itself connects to mains 230V via a separate driver unit. The spotlight cannot be powered directly from mains voltage.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45725199696139,"sku":"TR005-4-12W-DS-BBS","price":95.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_TR005-4-12W-DS-BBS_on_w_standard_b6c8e4e2-b567-4d13-beaa-4e7f7b507dcf.jpg?v=1737122242"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/collections\/new_sidebar_menu_2_451fc455-9294-4f49-9a28-9628463a242a.jpg?v=1787230011","url":"https:\/\/niori.co.uk\/collections\/smart-lighting.oembed?page=12","provider":"Niori","version":"1.0","type":"link"}