{"title":"LED Strip Lighting","description":"\u003cp\u003eAn LED strip is only as good as the parts around it. We stock the strips themselves, in 12V and 24V, single colour, COB and RGB, alongside the drivers that power them, the aluminium profiles that hide and cool them, and the connectors that join a run together, so a complete installation can be planned from one page.\u003c\/p\u003e","products":[{"product_id":"75w-12v-constant-voltage-led-driver-non-dimmable","title":"75W 12V Constant Voltage LED Driver - Non-Dimmable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 12DC75 is a 75W constant voltage LED driver that converts 230V mains power to a stable 12V DC output for low-voltage LED lighting installations. The driver delivers up to 6.3A maximum current through captured screw terminals on the mains and output sides, eliminating loose terminal screws during installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial LED strip lighting, under-cabinet installations, display lighting and low-voltage downlight arrays, the driver fits into ceiling voids, under kitchen plinths and behind joinery where mains wiring is available but the lighting itself runs on 12V DC. The 184mm × 61mm × 32mm polycarbonate housing allows the unit to be mounted in tight spaces using the fixing lugs at each end.\u003c\/p\u003e\n\u003cp\u003eThe driver includes open-circuit, short-circuit, overheat and overload protection, shutting down automatically if the load exceeds rated capacity or if wiring faults occur. Class II double-insulated construction means no earth connection is required on the mains input. The IP20 rating restricts use to dry interior locations only — the driver is not suitable for bathrooms, outdoor installations or anywhere moisture is present.\u003c\/p\u003e\n\u003cp\u003eThe 12DC75 is non-dimmable. Attempting to dim the driver using a mains-side dimmer will damage the unit and void the warranty. For dimmable 12V installations, Knightsbridge produces separate dimmable driver models available through Niori.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e184 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e61 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3883941_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_886950.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this driver be dimmed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The 12DC75 is a non-dimmable constant voltage driver. Connecting it to a mains-side dimmer will damage the unit and void the warranty. For dimmable 12V installations, use a dedicated dimmable driver model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum load it can power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver outputs 12V DC at up to 6.3A, giving a maximum total load of 75W. This is sufficient for approximately 5m of high-density 12V LED strip at 15W per metre, or 12-15 low-voltage downlights at 5W each.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can it be installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating restricts installation to dry interior locations only. Suitable for ceiling voids, under kitchen plinths, behind joinery and inside cupboards. Not suitable for bathrooms, outdoor use or anywhere moisture is present.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need an earth connection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The driver is Class II double-insulated, so no earth connection is required on the mains input. Only live and neutral connections are needed.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293552861451,"sku":"12DC75","price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/420684_fbeef4ef-8b36-496a-9e2d-2b07f43c8820.jpg?v=1714660208"},{"product_id":"knightsbridge-24dc75-75w-24v-constant-voltage-led-driver-non-dimmable","title":"Knightsbridge 24DC75 75W 24V Constant Voltage LED Driver - Non-Dimmable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 24DC75 is a 75W constant voltage LED driver that converts 230V 50Hz mains input to 24V DC output for LED strip lighting, under-cabinet LED modules, and other 24V constant voltage LED installations. The driver provides up to 3.1A output current and includes captured terminal screws for secure wire connection without requiring terminal blocks.\u003c\/p\u003e\n\u003cp\u003eDesigned for concealed installation in ceilings, kitchen plinths, furniture voids and other accessible spaces, the driver measures 184mm × 61mm × 32mm and sits in typical joisted ceiling voids or behind kitchen kickboards. The IP20 rating limits it to dry indoor locations — it is not suitable for bathrooms, outdoor use, or anywhere subject to moisture ingress. The white polycarbonate housing provides electrical insulation and meets Class II requirements, meaning no earth connection is needed.\u003c\/p\u003e\n\u003cp\u003eThe driver includes built-in protection against open circuit, short circuit, overload and thermal overrun. If the LED load is disconnected, shorted, or draws excessive current, the driver cuts output until the fault is cleared. The thermal protection monitors internal temperature and reduces output if the driver overheats, preventing damage during abnormal operating conditions. The output is non-dimmable — pairing with a dimmer will either fail to dim or damage the driver.\u003c\/p\u003e\n\u003cp\u003eThe SELV (Safety Extra Low Voltage) output at 24V DC is considered safe to touch under normal conditions, though live 230V mains input must be isolated and terminated by a qualified electrician. The compact 184mm length suits most concealed installation spaces and the captured terminal screws accept solid or stranded conductors up to 2.5mm² without additional ferrules.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e184 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e61 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3884173_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_886946.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this driver be used with dimmable LED strips?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The 24DC75 is a non-dimmable constant voltage driver. Attempting to dim the output by placing a dimmer on the mains input side will either fail to dim or damage the driver. For dimmable 24V installations, use a dimmable-rated driver model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum LED load this driver supports?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver delivers up to 75W at 24V DC, which equates to approximately 3.1A maximum output current. Total connected LED load must not exceed 75W. For LED strip, calculate total wattage by multiplying watts-per-metre by total run length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can this driver be installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating limits installation to dry indoor locations with adequate ventilation. Suitable locations include ceiling voids, kitchen plinths, furniture cavities and cupboards. It must not be installed in bathrooms, outdoors, or anywhere subject to moisture or condensation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require an earth connection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The driver is Class II double-insulated and does not require an earth connection. However, mains input wiring must be carried out by a qualified electrician and comply with current UK wiring regulations.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293552894219,"sku":"24DC75","price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/420686_b89e474b-d584-4948-bf07-9999d90e30ea.jpg?v=1714660211"},{"product_id":"24v-led-strip-light-3000k-warm-white-50m-reel-60-leds-m","title":"24V LED Strip Light 3000K Warm White - 50m Reel (60 LEDs\/m)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LFC24WW is a 24V DC LED strip light supplied on a 50m reel, delivering 3000K warm white light at 500 lumens per metre from 60 surface-mounted 2835 SMD LEDs per metre. The strip measures 8mm wide by 1.2mm thick, runs at 4.8W per metre, and can be cut to custom lengths every 100mm along marked cutting points.\u003c\/p\u003e\n\u003cp\u003eDesigned for under-cabinet lighting, cove lighting, retail display, architectural accent work and residential feature lighting where continuous runs are needed, the strip accepts installation in lengths up to 20m per continuous run before requiring a new power feed from the driver. The 24V DC operation reduces voltage drop over longer runs compared to 12V equivalents, making it better suited to installations where cable runs exceed 5m between driver and strip start point. The strip carries IP20 rating for dry internal environments only.\u003c\/p\u003e\n\u003cp\u003eEach metre draws 4.8W at 24V DC and requires a constant voltage LED driver sized to match the total connected strip length — for example, a 10m run draws 48W and requires a 24V driver rated at 50W minimum with headroom. The strip is dimmable when paired with a dimmable 24V driver and compatible dimming control, typically 0-10V or phase-cut depending on driver type. The rear carries 3M self-adhesive tape for mounting to clean, dry surfaces including aluminium extrusion profiles, painted MDF, and plasterboard.\u003c\/p\u003e\n\u003cp\u003eThe 3000K colour temperature produces warm white light comparable to traditional halogen, with a CRI above 80 for reasonable colour rendering in residential and hospitality settings. The 120-degree beam angle from the surface-mount LEDs provides wide light distribution suitable for indirect wash lighting rather than focused accent work. The L70B50 rating of 54,000 hours indicates the point at which 50% of LEDs will have degraded to 70% of initial output — roughly six years of continuous 24\/7 operation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e50000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e1.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eDriver dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e54000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eWarm White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e500 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e4.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e107.6 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4018568_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat driver do I need for this LED strip?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strip requires a 24V DC constant voltage LED driver. Size the driver by multiplying your total strip length in metres by 4.8W — for example, 10m requires a 48W driver, so specify a 50W or 60W unit to allow headroom. Knightsbridge and other manufacturers supply compatible 24V drivers in various wattages.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut the strip to a specific length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip can be cut every 100mm along marked cutting points. Niori offers a Flex Cut service for custom lengths — add the product to your basket and specify the required length at checkout, or contact us before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strip itself is dimmable, but dimming depends on pairing it with a dimmable 24V driver and compatible dimming control. Specify a dimmable driver when ordering the power supply, and check whether it requires 0-10V, phase-cut or other dimming protocol.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum continuous run length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe maximum continuous run is 20m before requiring a new power feed from the driver. Longer installations need the driver output split to feed multiple sections in parallel rather than daisy-chaining beyond 20m, which would cause visible brightness drop at the far end.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293584417035,"sku":"LFC24WW","price":187.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1472434_550b9ecd-f91e-492c-a4e1-f4d22b9c9494.jpg?v=1715604978"},{"product_id":"24v-led-strip-light-4000k-cool-white-50m-reel","title":"24V LED Strip Light 4000K Cool White - 50m Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 24V LED strip light delivers 525 lumens per metre at 4000K cool white from 60 x 2835 SMD LEDs per metre, drawing 4.8W per metre on a 24V DC constant voltage supply. The strip is supplied on a 50m reel, 8mm wide and 1.2mm thick, with 3M self-adhesive tape on the reverse for fixing to clean, dry surfaces.\u003c\/p\u003e\n\u003cp\u003eDesigned for internal applications including under-cabinet lighting, cove lighting, alcove illumination and display case lighting, the strip is IP20 rated for dry indoor environments only. The maximum continuous run length is 20m before voltage drop becomes noticeable, meaning runs longer than 20m require a second power injection point or a second driver. The strip can be cut to length every 100mm at marked cut points, allowing custom lengths to be created on site or via Niori's Flex Cut service when ordering.\u003c\/p\u003e\n\u003cp\u003eThe 24V operating voltage reduces current compared to 12V systems, meaning thinner cable runs are viable over longer distances and less heat is generated per metre of strip. The strip is dimmable when paired with a compatible 24V dimmable LED driver and dimmer control. The 4000K colour temperature sits between warm white and daylight, providing neutral illumination that works in kitchens, offices, retail display and contemporary residential spaces. CRI \u0026gt;80 ensures reasonable colour rendering for most applications.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e50000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e1.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eDriver dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e54000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e4000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCool White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e525 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e4.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e112.6 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4024692_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat driver does this strip require?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strip requires a 24V DC constant voltage LED driver. Total driver wattage must exceed the total length being powered multiplied by 4.8W per metre. For example, a 10m run requires a driver rated for at least 48W, though a 60W driver would provide headroom. The driver must be compatible with the strip's Class III rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the strip be cut to custom lengths?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip has marked cut points every 100mm along its length. Cuts must be made at these points to avoid damaging LED circuits. Niori offers a Flex Cut service at checkout to supply pre-cut lengths if preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this strip dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, when paired with a dimmable 24V LED driver and appropriate dimmer control. The strip itself is passively dimmable — dimming functionality depends entirely on the driver and control gear used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum run length before needing a second power connection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe maximum continuous run is 20m. Beyond 20m, voltage drop causes reduced brightness at the far end of the strip. Runs longer than 20m require a second power injection point or a separate driver feeding the additional length.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293584711947,"sku":"LFC24CW","price":187.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1472668_1514199d-2484-48d6-b676-e2e6efb857be.jpg?v=1715605335"},{"product_id":"24v-led-strip-light-6000k-daylight-50m-reel","title":"24V LED Strip Light 6000K Daylight - 50m Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LFC24DL is a 24V LED strip light supplied on a 50m reel, emitting 6000K daylight white light at 530 lumens per metre. The strip uses 60 x 2835 SMD LEDs per metre on an 8mm-wide flexible PCB, drawing 4.8W per metre and requiring a 24V constant voltage driver to operate.\u003c\/p\u003e\n\u003cp\u003eDesigned for internal architectural and accent lighting where a cool daylight white is needed, the strip suits under-cabinet lighting in kitchens, display case illumination in retail, recessed cove lighting in commercial interiors, and task lighting in workshops or technical spaces. The maximum single run is 20m without voltage drop issues, so longer installations require additional power injection points at 20m intervals. The strip can be cut every 100mm at marked cutting points, allowing precise length customisation on site.\u003c\/p\u003e\n\u003cp\u003eThe flexible 8mm-wide PCB arrives with 3M self-adhesive backing, allowing direct application to clean, dry surfaces including aluminium profiles, timber, plaster or MDF where surface preparation is adequate. The 1.2mm profile thickness means the strip fits recessed aluminium channels designed for tape lights without protruding above the profile edge. IP20 rating restricts use to dry internal environments only — bathrooms, wet rooms and outdoor applications require higher-rated alternatives. The strip is dimmable when paired with a 24V dimmable LED driver and compatible dimmer control.\u003c\/p\u003e\n\u003cp\u003eThe 6000K colour temperature produces a crisp, cool white light that enhances concentration and visibility in task-oriented settings. CRI \u0026gt;80 provides reasonable colour rendering for general applications, though critical colour-matching work may benefit from higher-CRI alternatives. The L70B50 rating of 54,000 hours indicates the point at which 50% of LEDs will have degraded to 70% of their original output under test conditions — approximately 6 years of continuous operation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e50000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e1.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eDriver dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e54000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eDaylight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e530 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e4.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e113.5 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4024760_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat driver does this strip require?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strip requires a 24V DC constant voltage LED driver. For a 50m reel drawing 4.8W per metre, the total load is 240W, so a driver rated at 250W or higher with headroom is needed. For shorter runs, calculate the wattage (length in metres × 4.8W) and choose a driver rated 10-20% above that figure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be cut to length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip can be cut every 100mm at marked cutting points along the reel. Cuts must be made at these points to maintain circuit integrity. Knightsbridge also offers this product through a cutting service where custom lengths can be supplied pre-cut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, when paired with a 24V dimmable LED driver and a compatible dimmer control. The strip itself does not contain dimming electronics — all dimming is controlled via the driver and external dimmer switch or controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot in wet or damp zones. The IP20 rating restricts the strip to dry internal environments only. For bathroom zones or any damp location, use an IP65 or IP67-rated LED strip instead.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293584810251,"sku":"LFC24DL","price":187.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1472828_1394fd37-844a-4fb9-96dc-04eb288167e4.jpg?v=1715605359"},{"product_id":"24v-blue-led-strip-light-50m-ip20-indoor-60-leds-m","title":"24V Blue LED Strip Light 50m - IP20 Indoor - 60 LEDs\/m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LFC24B is a 24V blue LED strip light supplied on a 50m reel, with 60 x 2835 SMD LEDs per metre delivering 95 lumens per metre at 4.8W consumption. The 8mm-wide flexible strip carries a self-adhesive 3M backing for direct mounting to clean, dry surfaces and can be cut every 100mm to fit the required run length.\u003c\/p\u003e\n\u003cp\u003eDesigned for indoor accent lighting applications where blue illumination is needed, the strip suits under-cabinet lighting in kitchens, cove lighting in media rooms, bar counter highlights, retail display shelving, and decorative installations where colour is part of the design scheme. The IP20 rating restricts use to dry internal environments only. Maximum continuous run length is 20m before voltage drop affects brightness, so runs longer than 20m require power injection at intervals or splitting into separate circuits.\u003c\/p\u003e\n\u003cp\u003eThe strip requires a separate 24V constant voltage LED driver (sold separately) sized to match the total wattage of the installed length. For a full 50m reel that's 240W, though most installations use shorter cut sections. Dimming capability depends on the driver and control gear used — the strip itself is dimmable when paired with a compatible dimming driver and controller. The 2.1mm profile sits flat against mounting surfaces and the Class III rating means the low-voltage circuit is inherently safer than mains-voltage alternatives.\u003c\/p\u003e\n\u003cp\u003eNiori offers a Flex Cut service for this product, allowing customers to order specific cut lengths rather than purchasing the full 50m reel. The blue colour sits at approximately 465-470nm wavelength, producing a vivid saturated blue rather than a daylight or cool-white tone.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e50000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eDriver dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e95 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e4.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e19.2 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4024799_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat driver do I need for this LED strip?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strip requires a 24V constant voltage LED driver. Calculate total wattage by multiplying the installed length in metres by 4.8W. For example, a 10m run needs a 48W driver minimum, though a 60W driver allows headroom. The driver must be rated for the total connected load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut the strip to a specific length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip has cut marks every 100mm where it can be safely divided without damaging the circuit. Niori also offers a Flex Cut service where specific lengths can be ordered pre-cut from the reel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the driver and control system used. The strip itself is compatible with dimming when paired with a dimmable 24V driver and an appropriate dimmer controller. PWM and 0-10V control methods both work depending on driver specification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is the maximum run 20m when the reel is 50m?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVoltage drop occurs over long cable runs, causing LEDs at the far end to dim. Beyond 20m the voltage drop becomes visible as uneven brightness. Longer installations require power injection at intervals or splitting into multiple parallel runs, each fed from the driver separately.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293584941323,"sku":"LFC24B","price":233.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1473010_d64037a7-25c6-4cfa-871d-dd2582ab5d2b.jpg?v=1715604030"},{"product_id":"24v-green-led-strip-light-50m-60-leds-m","title":"24V Green LED Strip Light - 50m (60 LEDs\/m)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge 24V green LED strip light comes on a 50m reel with 60 x 2835 SMD LEDs per metre, delivering 300 lumens per metre at 4.8W consumption. The strip runs on 24V DC constant voltage and requires a separate 24V LED driver (sold separately). The 8mm-wide flexible PCB is cuttable every 100mm at marked intervals, allowing precise length fitting during installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for accent lighting in commercial, hospitality and residential interiors, the green output works for mood lighting, feature wall washes, shelf underlighting, bar lighting and architectural detailing where colour is part of the design brief. The strip carries an IP20 rating, restricting it to dry internal environments away from moisture. Maximum continuous run length is 20m from a single driver connection — longer installations require power injection at 20m intervals to maintain consistent brightness.\u003c\/p\u003e\n\u003cp\u003eThe back of the strip carries 3M self-adhesive tape for fixing to clean, dry surfaces including aluminium extrusion channels, timber joists, plasterboard reveals and the underside of shelving. The strip is dimmable when paired with a compatible 24V LED dimmer and driver combination — confirm dimmer compatibility before specifying. The 2835 SMD LED package gives a balance of output and heat dissipation across long runs without requiring additional cooling in typical installations.\u003c\/p\u003e\n\u003cp\u003eKnightsbridge supplies this strip on a 50m reel. Niori offers a Flex Cut service allowing purchase of custom lengths cut from the reel — contact us if you need a specific meterage rather than the full 50m.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e50000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eDriver dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e300 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e4.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e68.5 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4024867_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat driver does this strip need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strip runs on 24V DC constant voltage. Calculate total wattage (4.8W per metre × your installed length) and select a 24V LED driver rated at least 20% above that total. For a full 20m run that's 96W, so a 120W+ driver is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the strip be cut to length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip is cuttable every 100mm at marked cut points. Cutting elsewhere damages the circuit. Niori offers a Flex Cut service if you need a specific length cut from the reel before dispatch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, when paired with a compatible 24V dimmer and driver. Not all 24V drivers support dimming — check the driver specification before pairing with a dimmer control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can it be installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating restricts this strip to dry internal environments. It cannot be used in bathrooms within zones 0-2, outdoors, or anywhere exposed to moisture or condensation.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293585072395,"sku":"LFC24G","price":250.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1473044_d0019534-e2dc-47e1-80e5-510e8bc5f335.jpg?v=1715603732"},{"product_id":"24v-red-led-strip-light-50m-reel","title":"24V Red LED Strip Light - 50m Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LFC24R is a 24V red LED strip light supplied on a 50m reel, featuring 60 x 2835 SMD LEDs per metre on an 8mm-wide flexible PCB. The strip draws 4.8W per metre and emits 90 lumens per metre of red light, creating ambient accent lighting for internal installations such as under-counter kitchen lighting, shelf lighting, alcove illumination, and display case highlighting.\u003c\/p\u003e\n\u003cp\u003eDesigned for 24V DC constant-voltage operation, the strip requires an external 24V LED driver sized to the total run length (up to a maximum continuous run of 20m before voltage drop affects output). The strip is IP20 rated for dry internal environments only and cannot be used outdoors or in bathrooms. The flexible PCB allows it to bend around gentle curves and be routed through tight spaces, while 3M self-adhesive backing tape on the reverse allows direct mounting to clean, dry surfaces.\u003c\/p\u003e\n\u003cp\u003eThe strip can be cut to length every 100mm at marked cutting points along the PCB, allowing precise fitting to alcoves, shelves and cabinetry without waste. Red LED output is particularly useful for mood lighting, home cinema applications where red preserves night vision, and signage or display work where a specific colour accent is required. The strip is dimmable when paired with a compatible 24V dimmer and driver combination.\u003c\/p\u003e\n\u003cp\u003eThe 50m reel provides enough material for multiple runs across a large residential or light commercial project. For installations requiring shorter lengths, Knightsbridge offers a cutting service (Flex Cut) allowing purchase of custom lengths rather than the full reel.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e50000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eDriver dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e90 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e4.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e23.1 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4024883_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat driver does this strip need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strip requires a 24V DC constant-voltage LED driver. Size the driver to the total wattage of your run: multiply the run length in metres by 4.8W. For example, a 10m run draws 48W and requires a driver rated at least 55-60W to allow headroom.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut the strip to a specific length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip can be cut every 100mm at marked cutting points along the PCB. Cutting at any other point will damage the circuit and render that section unusable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this strip dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, when paired with a compatible 24V dimmer and driver. The dimmer sits between the mains supply and the driver, or between the driver and the strip, depending on the dimmer type. Check compatibility before purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used outdoors or in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the strip is not protected against moisture ingress and must only be used in dry internal locations away from water and high humidity.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293585170699,"sku":"LFC24R","price":233.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1473092_37e55316-ff8b-4712-984a-bd6c5dbbc16f.jpg?v=1715603775"},{"product_id":"24v-yellow-led-strip-light-50m-4-8w-m-ip20","title":"24V Yellow LED Strip Light 50m - 4.8W\/m IP20","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LFC24Y is a 24V DC yellow LED strip light supplied on a 50m reel, running at 4.8W per metre with 60 x 2835 SMD LEDs per metre. The strip measures 8mm wide by 2.1mm thick and carries an IP20 rating for internal use only. Each LED module emits yellow light at 105 lumens per metre, producing an overall efficacy of 24.9 lm\/W.\u003c\/p\u003e\n\u003cp\u003eDesigned for accent lighting, cove lighting, under-cabinet runs and decorative installations where yellow colour is specified, the strip can be cut every 100mm at marked sections to fit exact run lengths. Maximum continuous run length is 20m before voltage drop becomes noticeable. The strip comes with 3M self-adhesive backing for mounting on clean, dry surfaces and requires a separate 24V constant voltage LED driver (sold separately).\u003c\/p\u003e\n\u003cp\u003eThe yellow LED output suits theatrical, hospitality and retail applications where warm accent colour is needed without mixing RGB channels. The strip is dimmable when paired with a compatible 24V dimming driver or PWM controller. The 50m reel format allows large installations to be completed from a single supply, reducing join points and simplifying cable runs. Knightsbridge also offers this strip through a cutting service (Flex Cut), allowing custom lengths to be supplied cut to size.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e50000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eDriver dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e105 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e4.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e24.9 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4024894_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat driver is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strip requires a 24V DC constant voltage LED driver. Total wattage is 4.8W per metre, so a 50m reel draws 240W. Size the driver to match the total run length being installed, with 10-20% headroom recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the strip be cut to length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip can be cut every 100mm at marked sections. Knightsbridge also offers a Flex Cut service where custom lengths are supplied pre-cut to your specification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, when paired with a compatible 24V dimming driver or PWM controller. The strip itself has no onboard dimming — dimming control happens at the driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum continuous run length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e20m is the maximum recommended continuous run before voltage drop affects brightness and colour consistency at the far end. Longer installations should be powered from both ends or split into multiple shorter runs.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293585269003,"sku":"LFC24Y","price":250.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1473136_563ff434-d212-4fd4-bf73-559c1ec3a92e.jpg?v=1715603807"},{"product_id":"24v-high-lumen-led-strip-light-3000k-30m-reel","title":"24V High Lumen LED Strip Light 3000K - 30m Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LFC24HLWW is a 24V constant-voltage LED strip light supplied on a 30m reel, with 128 x 2835 SMD LEDs per metre delivering 1260lm at 3000K warm white. The strip runs at 9.6W per metre, giving 288W total power draw across the full 30m length when paired with an appropriately sized 24V driver. Each strip is 8mm wide and 1.2mm thick, with a cuttable section every 62.5mm for precise length adjustment on-site.\u003c\/p\u003e\n\u003cp\u003eDesigned for internal architectural and under-cabinet lighting where high lumen output is required from a discreet strip profile, the LFC24HLWW suits kitchen worktop lighting, cove lighting in commercial interiors, wardrobe lighting and cabinet display illumination. The maximum run length from a single driver output is 10m — longer installations require the 30m reel to be cut into multiple runs, each powered from separate driver outputs or from a distribution amplifier. The strip carries an IP20 rating and is not suitable for bathrooms, wet areas or external use.\u003c\/p\u003e\n\u003cp\u003eThe 24V DC architecture reduces current draw compared to 12V strips of equivalent output, allowing longer single runs and thinner wiring between driver and strip. The strip is supplied with 3M VHB self-adhesive tape on the back for direct fixing to clean, dry aluminium extrusions or other mounting surfaces. Dimming is possible when paired with a dimmable 24V driver and compatible PWM or 0-10V control gear. The CRI \u0026gt;80 rating gives acceptable colour rendering for most residential and hospitality applications where critical colour matching is not required.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e30000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e1.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eDriver dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e54000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eWarm White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1260 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e9.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e144 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4024952_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat driver is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strip requires a 24V DC constant-voltage driver. For the full 30m reel running continuously, a driver rated at 288W or higher is needed (30m x 9.6W\/m). In practice, most installations cut the reel into shorter runs of up to 10m, each powered from separate driver outputs — a 10m run needs a 96W minimum driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be cut to length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip has cut marks every 62.5mm along its length. Cutting at these marks ensures the circuit remains complete and the strip can be powered from either end. Cuts made between marks will leave non-functional LEDs on the offcut section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the driver and control gear. Pair the strip with a dimmable 24V driver and a compatible PWM or 0-10V controller to achieve smooth dimming. Standard non-dimmable drivers will run the strip at full output only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum single run length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe maximum continuous run from a single power feed point is 10m. Runs longer than 10m experience voltage drop towards the far end, causing uneven brightness. For installations requiring more than 10m of strip, cut the reel into multiple 10m (or shorter) sections and power each section from separate driver outputs.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293585367307,"sku":"LFC24HLWW","price":194.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1473194_28aed341-85dd-40a0-8b2e-8b8fd2d84022.jpg?v=1715604897"},{"product_id":"24v-high-output-led-strip-light-4000k-cool-white-30m-reel","title":"24V High Output LED Strip Light 4000K Cool White - 30m Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LFC24HLCW is a 24V DC LED strip light delivering 1300 lumens per metre at 4000K cool white, supplied on a 30m reel. The strip uses 128 x 2835 SMD LEDs per metre on an 8mm-wide flexible PCB with 3M self-adhesive backing, drawing 9.6W per metre at full output and achieving an efficacy of 148.6lm\/W.\u003c\/p\u003e\n\u003cp\u003eDesigned for internal architectural lighting, under-cabinet lighting, cove lighting, and display case installations where bright cool white light is required, the strip is rated IP20 and suitable only for dry internal environments. The 24V DC voltage allows maximum run lengths of up to 10 metres per driver connection before voltage drop impacts brightness, making it well-suited to medium-length linear runs without intermediate power injection. The strip can be cut to length every 62.5mm at marked cut points, and Niori offers a Flex Cut service to supply pre-cut lengths to specification.\u003c\/p\u003e\n\u003cp\u003eThe 4000K colour temperature sits in the cool white range, producing a clean, neutral light that works well in kitchens, bathrooms away from the bath and shower zones, offices, and retail displays where colour accuracy and visibility are priorities. We rate it IP20, so it is not for positions that can be splashed. The strip is dimmable when paired with a compatible 24V constant voltage LED driver and dimming control gear. The CRI of \u0026gt;80 provides reasonable colour rendering for general applications, though not to the standards required for fine art or textile display. The 3M self-adhesive backing bonds to clean, dry surfaces including aluminium extrusions, MDF, and painted surfaces.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e30000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e1.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eDriver dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e54000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e4000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCool White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1300 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e9.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e148.6 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4025104_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat driver does this LED strip need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strip requires a 24V DC constant voltage LED driver. For a full 10m run at 9.6W per metre, you need a driver rated at a minimum of 96W (10m x 9.6W), though a 120W driver would provide headroom. Shorter runs require proportionally lower wattage drivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut the strip to a specific length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip can be cut every 62.5mm at marked cut points along the reel. Niori offers a Flex Cut service to supply pre-cut lengths to your specification, saving time on site and reducing waste.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this strip dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, when paired with a dimmable 24V constant voltage LED driver and appropriate dimming control gear (0-10V, PWM, or DALI depending on the driver). The strip itself does not include dimming circuitry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum run length per connection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e10 metres per driver connection. Runs longer than 10m will experience voltage drop that reduces brightness towards the end of the strip, so longer installations require multiple driver connections or mid-run power injection.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293585465611,"sku":"LFC24HLCW","price":194.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1473316_529874b4-f2eb-4152-8f31-b7a19806d9da.jpg?v=1715604927"},{"product_id":"24v-high-output-led-strip-light-6000k-30m-reel","title":"24V High Output LED Strip Light 6000K - 30m Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LFC24HLDL is a 24V high-output LED strip light supplied on a 30m reel, delivering 1250 lumens per metre at 6000K daylight white. The strip runs 128 individual 2835 SMD LEDs per metre on an 8mm-wide flexible PCB, drawing 9.6W per metre. The strip is IP20 rated for dry internal environments and comes with 3M self-adhesive backing tape pre-applied to the rear.\u003c\/p\u003e\n\u003cp\u003eDesigned for continuous cove lighting, under-cabinet runs, retail display lighting and office task lighting where bright, cool-toned light is needed, the strip can be cut to length every 62.5mm along marked cut points. Maximum continuous run length is 10m before voltage drop becomes significant — longer installations require power injection at additional points along the run. The strip requires a separate 24V constant-voltage LED driver sized to the total wattage of the installation, and is dimmable when paired with compatible dimming control gear.\u003c\/p\u003e\n\u003cp\u003eThe 6000K colour temperature produces a clinical daylight white suited to workspaces, commercial environments and areas where colour accuracy matters. The 151.5 lumens per watt efficacy and CRI \u0026gt;80 rating make the strip energy-efficient without compromising colour rendering. The flexible silicone construction allows the strip to bend around corners and curves, though tight radius bends may require flexible corner connectors to avoid damaging the PCB. Niori offers a Flex Cut service for pre-cut custom lengths if full 30m reels are not required.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e30000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e1.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eDriver dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e54000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eDaylight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1250 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e9.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e151.5 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4025164_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat driver does the strip require?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 24V constant-voltage LED driver is required, sized to the total wattage of the installation. For example, a 5m run consumes 48W (5m x 9.6W per metre), so a 60W or larger 24V driver would be appropriate. The driver must be rated for the total length being powered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the strip be cut to custom lengths?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip has cut marks every 62.5mm where it can be safely cut with sharp scissors. Niori also offers a Flex Cut service to supply pre-cut custom lengths if you do not need the full 30m reel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the strip dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, when paired with a dimmable 24V LED driver and compatible dimming control gear. The strip itself does not contain dimming circuitry — dimming control happens at the driver level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors or in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the strip is not protected against moisture ingress and must only be used in dry internal environments. For bathrooms, kitchens or outdoor use, an IP65 or IP67 rated strip would be required.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293585563915,"sku":"LFC24HLDL","price":194.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1473382_c7a66894-7981-4541-bdb6-fcc6e472073d.jpg?v=1715604949"},{"product_id":"24v-cct-led-strip-light-2700k-to-6000k-30m-reel","title":"24V CCT LED Strip Light 2700K to 6000K - 30m Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 24V CCT LED strip light combines warm white (2700K), neutral white (4000K) and cool white (6000K) LEDs on a single 10mm-wide flexible PCB strip. By pairing the strip with a CCT-compatible controller and 24V constant voltage driver, the colour temperature can be adjusted between 2700K and 6000K to match different tasks, times of day or interior palettes. The strip carries 120 x 2016 SMD LEDs per metre, consuming 11W per metre at 4000K and producing between 430lm and 910lm per metre depending on the selected colour temperature.\u003c\/p\u003e\n\u003cp\u003eDesigned for internal architectural lighting applications including under-cabinet lighting, coving, shelving accent, display lighting and indirect ceiling uplighting, the strip is supplied on a 30m reel with 3M self-adhesive backing. The maximum continuous run length without voltage drop is 10m, so longer runs require multiple driver feeds or amplifier modules at 10m intervals. The strip can be cut to length every 100mm at marked intervals, allowing precise fitting to shelf depths, cabinet widths and coving runs.\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating limits the strip to dry internal environments only — it is not suitable for bathrooms, outdoor installations or any location where moisture contact is possible. The silicone coating on the LED surface provides minor dust resistance and makes the strip easier to clean during installation but does not provide ingress protection. The strip requires a separate 24V constant voltage LED driver sized to the total wattage of the installed run, plus a CCT controller to enable colour temperature adjustment. Both brightness and colour temperature are adjustable when paired with a compatible dimming and CCT control system.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e30000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eDriver dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e36000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e490 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e94.4 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4025303_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat driver and controller are required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strip requires a 24V constant voltage LED driver sized to the total wattage of the installed run (11W per metre), plus a separate CCT controller to enable colour temperature adjustment. Both the driver and CCT controller must support the total run length and wattage. Dimming capability depends on the driver and controller model chosen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum continuous run length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe maximum run length without voltage drop is 10m. Longer installations require multiple driver feeds or amplifier modules at 10m intervals to maintain consistent brightness and colour temperature across the entire run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the strip be cut to custom lengths?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip can be cut every 100mm at marked intervals along the reel. This allows precise fitting to shelf depths, cabinet widths and coving runs. Knightsbridge also offers a Flex Cut service for pre-cut lengths — contact us for details.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms or outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the strip is for dry internal environments only. It is not suitable for bathrooms, kitchens near sinks, outdoor installations or any location where moisture contact is possible. For wet or outdoor applications, look for IP65 or IP67-rated LED strip alternatives.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293585629451,"sku":"LFC24CCT","price":241.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1473450_2ae0ee69-c4f4-4a9e-9c0a-b3e9644b9acc.jpg?v=1715604443"},{"product_id":"24v-rgb-led-strip-light-30m-reel-10mm-width-ip20","title":"24V RGB LED Strip Light 30m Reel - 10mm Width IP20","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LFC24RGB is a 24V RGB LED strip light supplied on a 30m reel, with 36 x 5050 SMD LEDs per metre along a 10mm-wide flexible printed circuit board. The strip draws 9W per metre and runs on 24V DC, requiring a separate constant voltage driver and RGB controller (both sold separately) to power and control the colour-changing modes.\u003c\/p\u003e\n\u003cp\u003eDesigned for indoor accent lighting, under-cabinet illumination, alcove lighting and perimeter cove lighting in residential and commercial interiors, the strip can be run in continuous lengths up to 10m from a single driver connection. Longer installations require additional driver feeds at 10m intervals. The strip carries an IP20 rating, meaning it has no moisture protection and must be installed in dry indoor locations only.\u003c\/p\u003e\n\u003cp\u003eThe strip arrives with 3M self-adhesive backing along its full length, allowing it to be pressed onto clean, dry surfaces without additional fixings. The 10mm width fits into shallow recesses and channels without protruding, and the 1.8mm thickness (including adhesive backing) keeps the strip flat against the mounting surface. Cut sections are spaced every 166mm, marked on the strip, where the circuit can be trimmed with scissors to fit exact lengths without damaging the LEDs.\u003c\/p\u003e\n\u003cp\u003eRGB capability means the strip can produce red, green, blue and mixed colours (cyan, magenta, yellow, white) depending on the controller paired with it. Most RGB controllers offer static colour selection, smooth fading transitions between colours, and dynamic multi-colour chase modes. The strip itself is the light source only; all colour control functionality comes from the external RGB controller unit, which is not included with this reel.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e30000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e1.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eDriver dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eRGB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4025434_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat else do I need to make this work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strip requires a 24V constant voltage LED driver sized to match the total wattage of the installed length (9W per metre), plus an RGB controller and remote to control colour changes. Neither the driver nor the RGB controller are included with the reel. Knightsbridge and other manufacturers offer compatible RGB controllers — contact us if you need recommendations for a specific installation length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut the strip to length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip has cut marks every 166mm where it can be trimmed with scissors without damaging the circuit. Cutting at any other point will damage the LEDs in that section and void the warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum run length from one driver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e10m is the maximum continuous run from a single driver connection. Voltage drop beyond 10m reduces brightness and colour accuracy at the far end of the strip. Installations longer than 10m need additional driver feeds at 10m intervals, wired in parallel from the main power supply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used outdoors or in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the strip has no protection against moisture or dust ingress. It must be installed in dry indoor locations only. Knightsbridge produces IP65 and IP67 rated LED strips for outdoor and wet-location use — use the search function to find those alternatives.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293585793291,"sku":"LFC24RGB","price":250.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/pixelcut-export_490ec647-48ff-4149-be6a-bbe7e0292d4e.jpg?v=1715605537"},{"product_id":"24v-rgbw-led-strip-light-30m-reel-5050-smd-ip20","title":"24V RGBW LED Strip Light 30m Reel - 5050 SMD IP20","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LFC24RGBW is a 24V RGBW LED strip light supplied on a 30m reel, featuring 36 x 5050 SMD LEDs per metre that produce both RGB colour-changing light and a separate daylight white channel at 6000K. The strip runs at 9W per metre and requires a 24V constant voltage driver and a separate RGBW controller (both sold separately) to operate the colour-changing modes and white channel independently.\u003c\/p\u003e\n\u003cp\u003eDesigned for internal architectural lighting, the strip suits under-cabinet installations, cove lighting, display shelving, back-of-TV accent lighting, and feature walls where both colour effects and functional white task light are needed from the same fitting. The 12mm width and 1.8mm thickness allow the strip to fit into narrow recesses and extrusions. Each 30m reel can be cut every 166mm at marked intervals, allowing the strip to be trimmed to exact lengths on site. Maximum continuous run per driver is 10m — longer installations require additional power injection points.\u003c\/p\u003e\n\u003cp\u003eThe strip carries an IP20 rating, restricting it to dry internal locations away from moisture and splash zones. A 3M self-adhesive backing is pre-applied to the rear of the strip for direct mounting to clean, dry surfaces, though aluminium extrusions are recommended for heat dissipation and professional finishes. The CRI of \u0026gt;85 ensures decent colour rendering when the white channel is used for task lighting, and the 120° beam angle provides broad wash coverage from each LED. The strip is rated to L70B50 at 36,000 hours, meaning 70% of the initial lumen output remains after 36,000 hours of operation when run at rated conditions.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e30000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e1.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eDriver dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e36000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eRGBW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e260 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e87.2 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4025435_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat driver and controller are needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis strip requires a 24V DC constant voltage driver sized to match the total wattage of the installation (9W per metre) plus 20% headroom, and a separate RGBW controller to operate the colour-changing modes and white channel. Both are sold separately. Knightsbridge and compatible third-party drivers and controllers are available at Niori.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the strip be cut to length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip can be cut every 166mm at marked cut points along the reel. Cutting between these points will damage the circuit and void the warranty. Niori also offers a Flex Cut service for pre-cut lengths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum run length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e10m is the maximum continuous run from a single power feed. Installations longer than 10m require additional power injection at intermediate points to prevent voltage drop and colour shift along the strip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms or outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating restricts this strip to dry internal locations only. For bathrooms or outdoor use, choose an IP65 or IP67 rated strip from the Knightsbridge range.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293585891595,"sku":"LFC24RGBW","price":267.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/680510_99eedca1-5063-4e07-8e95-e68d962092a1.jpg?v=1715603985"},{"product_id":"knightsbridge-1m-aluminium-led-profile-surface-mount-flat","title":"Knightsbridge 1m Aluminium LED Profile - Surface Mount Flat","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 1m surface mount aluminium LED profile is a flat-section housing for LED strip up to 12mm wide, supplied with an opal diffuser, two mounting clips and two end caps. The 17mm-wide aluminium channel sits 7mm from the mounting surface when fitted, providing a low-profile solution for under-cabinet lighting, shelf lighting, and recessed lighting detail where a flush-mount profile cannot be installed.\u003c\/p\u003e\n\u003cp\u003eDesigned for use under kitchen cabinets, inside shelving units, along skirting boards, or as architectural accent lighting in retail and hospitality spaces, the profile conceals the LED strip behind the opal diffuser and creates a continuous line of light without visible LED dots. The two included mounting clips fix the profile to the underside of a cabinet or shelf using screws (not included), and the channel then clips into the mounting brackets. This means the profile can be removed for maintenance or LED strip replacement without disturbing the fixed mounting clips.\u003c\/p\u003e\n\u003cp\u003eThe matt silver aluminium finish blends with most cabinet interiors and painted surfaces. The opal diffuser softens the light output and hides the individual LED diodes on the strip, creating a more uniform light distribution along the 1m run. The IP20 rating makes this profile suitable for dry indoor environments only — not bathrooms, kitchens near sinks, or outdoor use. Additional mounting clips and end caps are available separately (part code 1MSURCAP) if the profile needs to be cut shorter or joined with another 1m section.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4607577_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED strip does this profile accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe profile accepts LED strip up to 12mm wide. Most standard single-row LED strips are 8-10mm wide and fit comfortably inside the channel behind the opal diffuser.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the profile mounted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo metal mounting clips are included in the pack. The clips fix to the mounting surface with screws (not supplied), and the aluminium profile then clips into the mounting brackets. This allows the profile to be removed for maintenance without disturbing the fixed clips.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the profile be cut to a shorter length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The aluminium channel and diffuser can both be cut with a hacksaw or fine-tooth saw to any length shorter than 1m. Additional end caps are available separately (part code 1MSURCAP) if you need to seal the cut end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms or outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means this profile is designed for dry indoor environments only. It is not rated for damp or wet areas such as bathrooms, outdoor installations, or kitchen zones near sinks.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293620035851,"sku":"1MSUR","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/797502_bd402675-bac2-4956-84e7-d015563201f4.jpg?v=1714661267"},{"product_id":"1m-led-aluminium-profile-surface-mount-white","title":"1m LED Aluminium Profile Surface Mount - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis 1m LED aluminium profile provides a surface-mount housing for LED strip lighting up to 12mm wide, finished in powder-coated matt white. The 17mm-wide, 7mm-deep profile includes a 1m opal diffuser that clips into the channel to soften the LED point sources, plus two mounting clips and two end caps for a complete installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for under-cabinet lighting in kitchens, shelving illumination in alcoves, and cove lighting where the profile is mounted directly onto the surface rather than recessed. The white finish blends into white cabinetry or painted walls, making the fitting less visible when the LEDs are off. The opal diffuser spreads the light evenly along the length of the strip, reducing the dotted LED appearance common with bare strip installations.\u003c\/p\u003e\n\u003cp\u003eThe aluminium construction acts as a heatsink for the LED strip, helping to extend LED life by dissipating heat generated during operation. The IP20 rating suits dry indoor locations only — this profile is not suitable for bathrooms, outdoor use, or areas subject to moisture. Additional mounting clips and end caps are available separately (SKU 1MSURWCAP) if multiple 1m sections are being joined or extra support is needed along the run.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4610322_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED strip does this profile accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe profile accepts LED strip up to 12mm wide. Most standard single-row LED strips fit comfortably within this width. Measure your LED strip before purchasing to confirm compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the diffuser included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The profile ships with a 1m opal diffuser, two mounting clips and two end caps as a complete kit. The diffuser clips into the channel and can be removed for LED strip installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means this profile is suitable for dry indoor locations only. It is not rated for use in bathrooms, kitchens near sinks, or any area subject to moisture or splashing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it mounted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe profile is surface-mounted using the two supplied mounting clips, which screw directly onto the wall or underside of a cabinet. The aluminium channel then clips into the mounted brackets. Additional clips can be purchased separately if longer runs or extra support are needed.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293620429067,"sku":"1MSURW","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/799102_405ed75e-23ab-4878-b427-6afd85cc8be3.jpg?v=1714661269"},{"product_id":"knightsbridge-1m-led-aluminium-profile-surface-mount-black","title":"Knightsbridge 1m LED Aluminium Profile Surface Mount - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 1m LED aluminium profile is a surface-mount channel designed to house and protect LED strip lighting up to 12mm wide. The profile consists of a matt black powder-coated aluminium base measuring 1000mm long by 17mm wide by 7mm deep, supplied with an opal polycarbonate diffuser that clips into the channel and two black plastic end caps to seal the ends.\u003c\/p\u003e\n\u003cp\u003eDesigned for under-cabinet lighting in kitchens, under-shelf illumination in retail displays, cove lighting along skirting boards, and concealed accent lighting in joinery, the low-profile design sits 7mm proud of the mounting surface once installed. The profile mounts directly to the underside of cabinets, shelves or plinths using the two supplied mounting clips, which fix with screws (not included) at intervals along the 1m run. Additional clips can be purchased separately for longer installations or tighter fixing intervals.\u003c\/p\u003e\n\u003cp\u003eThe opal diffuser softens the point-source appearance of individual LEDs within the strip, creating an even line of light without visible hotspots. The 17mm width keeps the profile visually discreet when mounted in visible locations such as glass shelving or open alcoves. The IP20 rating limits the profile to dry indoor locations — it is not suitable for bathrooms, wet rooms or outdoor installation. The black powder-coat finish provides corrosion resistance and pairs with matt black joinery, dark worktops and contemporary interiors using black metalwork.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4610323_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED strip does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe profile accepts LED strip up to 12mm wide. Most standard 12V and 24V LED strip products sold for cabinet and cove lighting measure 8-10mm wide and fit comfortably within the channel with room for the adhesive backing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the diffuser removable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The opal polycarbonate diffuser clips into the aluminium channel and can be removed to install or replace the LED strip, then re-clipped without tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many mounting clips are included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo mounting clips are supplied with each 1m profile. For installations where additional support is needed, or for runs longer than 1m created by joining multiple profiles end-to-end, additional clips and end caps are available separately under SKU 1MSURBKCAP.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the profile is only suitable for dry indoor locations. It is not rated for use in bathrooms, wet rooms, or any location where it may be exposed to moisture or condensation.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293620560139,"sku":"1MSURBK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/873680_5d4f4dec-eff1-4212-b851-742d372fe490.jpg?v=1714661271"},{"product_id":"aluminium-led-profile-1m-surface-mount-corner-matt-silver","title":"Aluminium LED Profile 1m Surface Mount Corner - Matt Silver","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 1MCOR is a 1m aluminium corner-mount LED profile designed to house LED strip tape up to 10mm wide behind an opal diffuser. The 45-degree angled profile fixes to internal corners where two surfaces meet (such as under-cabinet to wall, or shelf underside to cabinet side), positioning the LED strip at an angle rather than flat.\u003c\/p\u003e\n\u003cp\u003eDesigned for under-cabinet lighting, shelf lighting, and architectural accent lighting in kitchens, retail display units and media furniture, the corner-mount configuration directs light outward at an angle from the corner joint. The opal diffuser softens the individual LED diodes into a continuous light line and prevents point-source glare. Two mounting clips secure the 1m profile along its length, with further clips available separately for longer runs or uneven surfaces.\u003c\/p\u003e\n\u003cp\u003eThe profile is supplied with the opal diffuser installed, two end caps to close the profile neatly at each end, and two mounting clips. The matt silver aluminium finish provides heat dissipation for the LED strip and blends into metal shelf brackets, aluminium kitchen plinths and light-toned cabinetry. The IP20 rating limits use to dry indoor locations only — not suitable for bathrooms, outdoor installations or locations where moisture is present.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4610324_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED strip does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe profile accepts LED strip tape up to 10mm wide. Standard 8mm and 10mm single-row LED strips fit without modification. The strip sits on the angled bed of the profile behind the diffuser.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow is it fixed to the surface?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe profile is surface-mounted using two included metal mounting clips that screw into the corner joint where two surfaces meet. The profile then clips into the mounted brackets. Additional clips are available separately (product code 1MCORCAP) for runs longer than 1m or where extra support is needed.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan it be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the profile is suitable for dry indoor locations only. It is not rated for use in bathrooms, wet rooms, outdoor installations or any location where moisture or steam is present.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat's included in the pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach 1m profile includes the aluminium channel, one opal diffuser (pre-installed), two end caps to close the profile at each end, and two mounting clips with fixings. LED strip tape is sold separately.\u003c\/p\u003e\n","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293620691211,"sku":"1MCOR","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/799124_01aeaf92-fbff-4792-a776-8eeb18e69424.jpg?v=1714661273"},{"product_id":"1m-recessed-led-aluminium-profile-matt-silver-with-opal-diffuser","title":"1m Recessed LED Aluminium Profile - Matt Silver with Opal Diffuser","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 1MREC is a 1m recessed aluminium profile designed to house LED strip lighting up to 12mm wide, creating a flush linear light fitting within cabinets, shelves, worktops and alcoves. The matt silver aluminium channel sits 6mm below the mounting surface with only a 1mm projection above, and the included opal diffuser spreads the LED point sources into a continuous band of light.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchen under-cabinet lighting, bookshelf illumination, wardrobe internals and retail display cases, the profile accepts standard 12V or 24V LED strip (sold separately) and requires a routed or cut channel 18mm wide to fit the base of the profile. The kit includes two mounting clips to secure the profile within the recess, plus two end caps to seal the aluminium channel at each terminus. The opal diffuser clips into the profile channel and can be removed for cleaning or LED strip replacement.\u003c\/p\u003e\n\u003cp\u003eThe 25mm width gives enough internal clearance for LED strip plus minor cable routing, while the shallow 6mm recess depth suits most cabinet and shelf thicknesses down to 18mm board. The matt silver finish on the aluminium minimises visible fingerprints and dust during installation. The IP20 rating suits indoor dry locations only — kitchens and living spaces are acceptable, but this profile is not rated for bathroom zones or outdoor use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4610325_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED strip does this profile accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe profile accommodates LED strip up to 12mm wide. Most single-row 12V and 24V LED strip tapes fit comfortably within this constraint, but double-row or RGB+W variants may exceed the width limit depending on manufacturer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included in the kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach 1m profile kit includes the aluminium channel, a 1m opal diffuser, two mounting clips and two end caps. LED strip, cabling and power supplies are sold separately. Additional mounting clips and end caps are available under SKU 1MRECCAP if longer runs require extra support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow deep does the recess need to be?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe profile sits 6mm below the mounting surface and requires an 18mm-wide routed channel to accommodate the aluminium base. Most cabinet and shelf materials 18mm thick or greater can accommodate this depth without structural compromise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the diffuser be removed after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The opal diffuser clips into the aluminium channel and can be removed to access the LED strip for replacement, repair or cleaning without disturbing the mounting clips or end caps.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293620887819,"sku":"1MREC","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/799138_0900dc93-05bf-42ca-9dbd-9bc3cf58fdc0.jpg?v=1714661276"},{"product_id":"1m-aluminium-led-profile-floor-recessed-matt-silver","title":"1m Aluminium LED Profile - Floor Recessed Matt Silver","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 1m aluminium LED profile is a floor-recessed channel designed to house LED strip lighting flush with the floor surface. The profile measures 1000mm long and 27.2mm wide, with a 9mm recessed depth that sits below floor level and a 2mm projection above, creating a near-flush finish when installed. The kit includes a 1m opal diffuser, two mounting clips and two end caps.\u003c\/p\u003e\n\u003cp\u003eDesigned for hallways, kitchen toe-kicks, staircase nosing and architectural floor lighting where LED strip needs to be protected from foot traffic while providing diffused light along the floor plane. The 22mm wide cut-out channel houses the aluminium profile, with the opal diffuser snapping into the top to protect the LED strip and soften the light output. The profile accepts LED strip up to 12mm wide, covering most standard 5mm and 10mm tape products.\u003c\/p\u003e\n\u003cp\u003eThe matt silver aluminium construction provides heat dissipation for the LED strip and structural rigidity to prevent flex under foot traffic. The IP20 rating suits dry indoor locations only — not suitable for wet rooms, bathrooms or outdoor use. Additional mounting clips and end caps are sold separately (SKU: 1MFLRCAP) for installations requiring multiple 1m sections joined end-to-end.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e27.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4610326_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat LED strip width does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe profile accepts LED strip up to 12mm wide, which covers most standard 5mm and 10mm LED tape products. Measure your LED strip width before ordering to confirm compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the diffuser included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The kit includes a 1m opal diffuser, two mounting clips and two end caps. The LED strip itself is sold separately and must be purchased to match the voltage and colour temperature you need.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms or outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating suits dry indoor locations only. It is not rated for wet rooms, bathrooms (zones 1-3) or outdoor installations where moisture is present.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I join multiple sections?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAdditional mounting clips and end caps are sold separately (SKU: 1MFLRCAP). Multiple 1m profiles can be installed end-to-end in the same cut-out channel, with the LED strip running continuously through each section.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293621051659,"sku":"1MFLR","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/799152_0b6f625f-87e1-4be8-bf02-fea4d8800885.jpg?v=1714661278"},{"product_id":"aluminium-led-profile-1m-plaster-in-recessed-matt-silver","title":"Aluminium LED Profile 1m Plaster-In Recessed - Matt Silver","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 1m recessed LED profile is a plaster-in aluminium channel designed to sit flush within plasterboard walls and ceilings, creating a continuous linear light detail without visible fittings. The profile measures 1000mm long by 55mm wide, with a 12mm recessed depth that accepts LED strip up to 12mm wide. An opal diffuser clips into the channel opening to diffuse the LED output into a seamless line of light.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial interiors where architectural lighting details are required without surface-mounted fittings, the profile sits within the plasterboard substrate so that only the 3mm-projection diffuser shows on the finished wall or ceiling surface. This makes it suitable for feature walls, coving details, stairwell lighting, kitchen plinths and bathroom mirror surrounds where the light source itself should remain hidden. The channel is cut into the plasterboard during first fix, the LED strip is installed within the channel, and the diffuser clips in before final plastering.\u003c\/p\u003e\n\u003cp\u003eThe aluminium construction provides rigidity for straight installation runs and acts as a heat sink for the LED strip, helping to maintain LED performance and lifespan. The matt silver finish on the aluminium reflects light within the channel before it passes through the opal diffuser, improving output efficiency. Each 1m length includes one opal diffuser and two end caps. Additional mounting clips and end caps are available separately (SKU 1MPLACAP) for runs longer than 1m or for corner transitions.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e55 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4610327_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED strip does the profile accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe channel accepts LED strip up to 12mm wide. Most standard flexible LED strip tape measures 8-10mm, so this profile accommodates the majority of residential and commercial LED strip products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the installation process?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe aluminium channel is cut into the plasterboard during first fix, creating a recessed slot 18mm deep. The LED strip is then fixed inside the channel using adhesive backing or mounting clips. The opal diffuser clips into the channel opening, and final plastering is applied to bring the wall or ceiling surface flush with the diffuser edge, leaving only a 3mm diffuser projection visible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple profiles be joined for longer runs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each profile is 1m long and can be butted end-to-end for continuous runs. Additional mounting clips and end caps (SKU 1MPLACAP) are sold separately for multi-metre installations and for corner or transition details.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe profile carries an IP20 rating, which means it is not water-resistant and should only be used in dry indoor locations. For bathroom zones requiring IP44 or IP65 protection, use a different profile designed for wet areas.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293621182731,"sku":"1MPLA","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/799166_3c1d462f-d80e-468e-8dc0-613700337a9c.jpg?v=1714661280"},{"product_id":"aluminium-led-profile-2m-surface-mount-matt-silver","title":"Aluminium LED Profile 2m Surface Mount - Matt Silver","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 2m aluminium LED profile is a surface-mount channel for housing LED strip lighting up to 12mm wide. The 17mm-wide profile has a 7mm projection from the mounting surface and includes a 2m opal diffuser, four mounting clips and two end caps in the box.\u003c\/p\u003e\n\u003cp\u003eDesigned for under-cabinet lighting, shelving illumination, and linear accent lighting where the profile sits flush against the surface rather than recessed into it, the channel protects the LED strip and diffuses the individual diode points into a continuous line of light. The opal diffuser softens hotspots without reducing light output significantly, giving a cleaner finish than exposed LED tape.\u003c\/p\u003e\n\u003cp\u003eThe matt silver aluminium finish acts as a heatsink for the LED strip, helping to maintain performance over time by dispersing heat away from the diodes. The channel accepts standard 12V or 24V LED strip up to 12mm width — measure your specific strip before ordering to confirm fit. The IP20 rating means the profile is suitable for dry indoor use only; for bathrooms, kitchens near sinks, or outdoor applications, a higher IP-rated profile is needed.\u003c\/p\u003e\n\u003cp\u003eEach 2m length can be cut to size with a hacksaw if a shorter run is needed, though cut edges will need filing smooth before fitting the end caps. Additional mounting clips and end caps are available separately under SKU 1MSURCAP for projects requiring more than the four clips supplied.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4611604_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED strip does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe channel accepts LED strip up to 12mm wide. Most standard 12V and 24V LED tape is 8mm or 10mm wide, which fits comfortably. Measure your specific strip before ordering to confirm compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the profile be cut to a shorter length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The aluminium channel can be cut with a hacksaw. File the cut edge smooth before fitting the end cap to avoid sharp edges and ensure the cap seats properly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include the LED strip?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The profile, diffuser, clips and end caps are supplied, but the LED strip itself is sold separately. Match your chosen strip to the 12mm maximum width and IP20 rating of the profile.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms or outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the profile is for dry indoor use only. For bathrooms (zones 1 and 2), kitchens near sinks, or outdoor applications, use an IP65 or higher-rated profile designed for moisture exposure.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293621346571,"sku":"2MSUR","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/799716_b3d0018e-356f-4c2e-b9b6-f205b8b71b7c.jpg?v=1714661283"},{"product_id":"aluminium-led-profile-2m-surface-mount-corner-matt-silver","title":"Aluminium LED Profile 2m Surface Mount Corner - Matt Silver","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 2m aluminium LED profile is a corner-mounted housing for LED strip lighting, designed to create an angled 45-degree light output from under-cabinet, shelf edge or worktop installations. The 16mm square angled aluminium extrusion accepts LED strip up to 10mm wide and comes with a 2m opal polycarbonate diffuser that clips into the profile channel to soften the LED point sources into a continuous line of light.\u003c\/p\u003e\n\u003cp\u003eDesigned for under-cabinet task lighting in kitchens, workshop benches, display shelving and retail counter edges, the corner profile mounts flush to the junction between a horizontal and vertical surface using the included mounting clips. The 45-degree angle directs light downward and outward, reducing glare for users working directly beneath the fitting while providing enough spread to illuminate worktops or displayed objects. The matt silver anodised finish blends with aluminium cabinet frames and stainless steel appliances.\u003c\/p\u003e\n\u003cp\u003eThe profile measures 16mm wide by 16mm projection from the mounting surface, creating a low-profile fitting that does not intrude into headroom beneath cabinets or shelving. Four mounting clips are included with the 2m length, spacing approximately 500mm apart for secure fixing to wood, MDF or plasterboard surfaces. Two end caps seal the profile ends and conceal the LED strip termination. The opal diffuser reduces LED hotspots and provides IP20-rated protection for the strip inside, suitable for dry interior locations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4612153_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED strip does this profile accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe channel fits LED strip up to 10mm wide. Standard 8mm and 10mm LED flex fits comfortably, while 12mm strip will not fit inside the profile.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the LED strip included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is the aluminium profile housing only. LED strip, power supply and connectors are sold separately and must be specified to match the application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the diffuser attached?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe opal polycarbonate diffuser clips into the open channel of the aluminium extrusion and can be removed for LED strip installation or replacement without tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan additional mounting clips be purchased?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Extra mounting clips and end caps are available separately under part number 1MCORCAP if longer runs need intermediate support or replacement caps are needed.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293621543179,"sku":"2MCOR","price":20.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/800324_e49f9156-1dee-4cb2-8575-2cc0b07ca369.jpg?v=1714661285"},{"product_id":"aluminium-led-profile-2m-recessed-mount","title":"Aluminium LED Profile 2m - Recessed Mount","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 2m recessed aluminium LED profile is a flat mounting channel designed to house LED strip lighting up to 12mm wide. The profile sits flush with the mounting surface, projecting only 1mm above the finished surface once installed, with a 6mm recessed depth below. The matt silver aluminium channel measures 25mm wide and includes an opal diffuser cover, four mounting clips, and two end caps.\u003c\/p\u003e\n\u003cp\u003eDesigned for cabinet interiors, under-shelf lighting, and wardrobe installations where the profile needs to be recessed into the surface rather than surface-mounted, the system requires a routing cut-out 18mm deep. The opal diffuser softens LED hotspots and spreads the light evenly along the 2m length, hiding the individual LED diodes from view. The profile is rated IP20 for dry interior use only.\u003c\/p\u003e\n\u003cp\u003eThe aluminium construction acts as a heat sink for the LED strip, helping to dissipate heat and extend LED lifespan compared to strip mounted directly to timber or MDF. The four included mounting clips secure the profile into the routed channel at 500mm intervals along the 2m length. Additional mounting clips and replacement end caps are available separately under SKU 1MRECCAP.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4612158_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED strip does this profile accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe profile is compatible with LED strip up to 12mm wide. Narrower strips work fine but will sit looser in the channel. Strips wider than 12mm will not fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the routing depth required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cut-out depth is 18mm to accommodate the 6mm recessed depth of the profile plus the thickness of the LED strip and mounting clips. Use a router or CNC to create a channel 18mm deep and 25mm wide along the length of the installation surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the LED strip come with the profile?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The profile is sold separately from LED strip. You will need to purchase compatible 12V or 24V LED strip separately and cut it to length before inserting into the channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the profile be cut to shorter lengths?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The aluminium profile can be cut with a hacksaw or mitre saw to any length shorter than 2m. The diffuser cover can be cut with a fine-tooth saw or Stanley knife. Additional end caps are available separately if you need to cap both ends of a cut section.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293621674251,"sku":"2MREC","price":20.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/800340_ad02f8f9-379b-42e9-8408-09964fc40ef8.jpg?v=1714661287"},{"product_id":"aluminium-led-profile-2m-floor-recessed-matt-silver","title":"Aluminium LED Profile 2m Floor Recessed - Matt Silver","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 2m floor recessed LED profile is a flat aluminium channel designed to sit flush with floor surfaces, projecting just 2mm above the finished floor level. The profile accepts LED strip up to 12mm wide and includes a 2m opal diffuser that sits inside the channel to soften and distribute light along the run. Four mounting clips and two end caps come with the profile to secure the channel and seal the ends during installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for recessed floor installations along hallways, under kitchen cabinets at floor level, and as architectural accent lighting in commercial spaces, the profile requires a 22mm wide cut-out routed into the floor substrate to a depth of 9mm. Once the channel is seated and the LED strip is fixed inside, the opal diffuser clips into place and the profile edge sits 2mm proud of the floor, creating a subtle threshold that guides foot traffic away from the light source itself.\u003c\/p\u003e\n\u003cp\u003eThe matt silver aluminium finish provides a neutral backdrop that blends with most floor finishes, from polished concrete to timber and vinyl. The IP20 rating makes this suitable for dry internal floors only — not bathrooms, wet rooms or outdoor thresholds. The 2000mm length can be cut to size on site using a hacksaw or mitre saw if shorter runs are needed, though additional end caps and mounting clips are sold separately for custom configurations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e27.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4612164_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED strip does this accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe profile accepts LED strip up to 12mm wide. Most standard single-row LED strips measure 8-10mm, so they fit with clearance. Double-row or RGB strips may be wider and should be checked against the 12mm maximum before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the profile supplied with LED strip?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The profile is sold as the aluminium channel, opal diffuser, mounting clips and end caps only. LED strip is purchased separately and fitted by the installer during the installation process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms or outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means this profile is suitable for dry internal areas only. For bathrooms, wet rooms or outdoor installations, a higher IP-rated profile is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the profile be cut to length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 2000mm aluminium channel can be cut to shorter lengths on site using a hacksaw or mitre saw. Additional end caps (sold separately, SKU 1MFLRCAP) are needed if custom lengths are created.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293621870859,"sku":"2MFLR","price":31.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/800354_c888d4eb-4000-4759-be94-5a1b957d4db7.jpg?v=1714661289"},{"product_id":"aluminium-led-profile-2m-plaster-in-recessed-matt-silver","title":"Aluminium LED Profile 2m Plaster-In Recessed - Matt Silver","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 2m plaster-in LED profile is a recessed aluminium channel designed to sit flush within plastered walls and ceilings, creating a continuous linear light line with minimal visual interruption. The 55mm-wide aluminium channel sits 12mm below the finished plaster surface, with only 3mm projection once the opal diffuser is clipped in. The profile accepts LED strip up to 12mm wide and ships with a 2m opal diffuser and two end caps.\u003c\/p\u003e\n\u003cp\u003eDesigned for wall washing, cove lighting and architectural accent lighting in residential and commercial interiors, the plaster-in profile requires a chase to be cut into the wall or ceiling during first-fix before plastering. The aluminium channel acts as both the mounting surface for the LED strip and a heat sink to dissipate thermal load away from the LEDs, extending strip life. The 18mm cut-out depth accommodates the channel body and allows clearance for wiring behind the strip.\u003c\/p\u003e\n\u003cp\u003eThe opal diffuser softens individual LED points into a continuous linear glow without visible hotspots, making the profile suitable for installation at eye level or in positions where the light source would otherwise be directly visible. The matt silver aluminium finish blends into white or off-white plasterwork once installed. Additional mounting clips and spare end caps are available separately under SKU 1MPLACAP.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e55 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4612171_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat LED strip width does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe profile accepts LED strip up to 12mm wide. Most standard single-row and some dual-row LED strips fall within this width. Measure your LED strip before ordering to confirm compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen is the profile installed during construction?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe aluminium channel is fixed into a chase cut into the wall or ceiling during first-fix, before plastering. The plaster is finished around the channel so the profile sits flush with the wall surface. LED strip is then fitted and the diffuser clipped in after second-fix electrics are complete.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the diffuser hide individual LED points?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The opal diffuser softens individual LED points into a continuous linear glow, eliminating visible hotspots. This makes the profile suitable for eye-level installation where an undiffused LED strip would show distinct bright points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the profile be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating means the profile is not rated for wet or damp environments. It is suitable for general indoor use in dry zones only. For bathroom zones 1-3, an IP44 or IP65-rated profile would be required.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293622001931,"sku":"2MPLA","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/800372_195f77df-9297-4c14-b575-06b6c4da0eec.jpg?v=1714661291"},{"product_id":"12v-24v-led-flex-wire-to-strip-connector-single-colour-8mm","title":"12V\/24V LED Flex Wire-to-Strip Connector - Single Colour 8mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge wire-to-strip connector joins a power cable to single-colour 8mm LED flex without soldering or terminal blocks. The polycarbonate housing accepts the flex on one side and a pair of power wires on the other, using a click-lock mechanism to secure both and establish electrical contact through internal spring-loaded pins.\u003c\/p\u003e\n\u003cp\u003eDesigned for 12V or 24V DC low-voltage LED strip installations in cabinets, shelving, display cases and cove lighting, the connector allows power cables to be run to the strip without cutting or stripping the flex's copper tracks. The IP20 rating restricts use to dry indoor locations. The 19mm x 12mm x 7mm housing sits flat against the strip, minimising projection where the strip is mounted in narrow channels or under-cabinet recesses.\u003c\/p\u003e\n\u003cp\u003eThe black polycarbonate finish blends into most installation environments where the connector will be visible. The Class III rating confirms the connector is suitable only for extra-low-voltage circuits below 50V AC or 120V DC. Installation requires no tools — the flex and wires push into their respective openings and the housing clicks shut to hold them in place.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e19 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4612837_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width of LED strip does it fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis connector is designed for 8mm-wide single-colour LED flex. It will not fit wider 10mm RGB strips or narrower 5mm variants. Check your strip's width before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors or in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the connector is suitable only for dry indoor locations with no exposure to moisture or dust ingress. For wet or damp environments an IP65 or IP67 connector is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with both 12V and 24V strips?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The connector is compatible with both 12V and 24V DC LED flex. Ensure the voltage of your power supply matches the voltage rating of your strip — the connector itself does not convert voltage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs soldering required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connector uses a tool-free click-lock mechanism. The LED flex and power wires push into their respective openings and the housing clicks shut to establish contact through internal spring pins.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293622133003,"sku":"LFCON2WS","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/800438_86497ed9-79ed-4d31-aca3-43507e2301c8.jpg?v=1714661294"},{"product_id":"aluminium-surface-mount-profile-end-caps-grey-pack-of-2","title":"Aluminium Surface Mount Profile End Caps - Grey (Pack of 2)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 1MSURCAP is a pack of two grey polycarbonate end caps designed to finish the open ends of 1MSUR and 2MSUR aluminium surface-mount LED profiles. Each end cap clips into the profile channel, sealing the end and giving a clean finish to the installation. The pack includes two fixing clips that secure the end caps in place.\u003c\/p\u003e\n\u003cp\u003eUsed in retail, office and residential LED strip installations where the aluminium profile runs need to terminate neatly at walls, corners or junctions. The end caps prevent dust ingress into the profile channel and hide the cut edge of the LED strip. The grey finish matches the anodised grey of the aluminium extrusion, maintaining a consistent appearance across the profile run.\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate construction provides impact resistance and temperature stability, meaning the end caps do not warp or discolour under the heat output from typical LED strip installations. Each end cap is push-fit into the profile channel with no tools required, and the included fixing clips provide additional retention where the profile is mounted vertically or overhead.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626292_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich profiles are these end caps compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 1MSURCAP fits Knightsbridge 1MSUR and 2MSUR aluminium surface-mount LED profiles. They are not compatible with recessed or corner-mount profile models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many end caps are in the pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach pack contains two end caps and two fixing clips, enough to finish both ends of a single profile run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre tools required to fit the end caps?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The end caps push-fit into the open ends of the aluminium profile channel. The fixing clips are included for additional retention on vertical or overhead installations but are not always required on horizontal runs.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293622460683,"sku":"1MSURCAP","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/850068_5244a896-1911-4063-b1f2-7cb1a8bdc129.jpg?v=1714661298"},{"product_id":"aluminium-corner-profile-end-caps-grey-polycarbonate-pack-of-2","title":"Aluminium Corner Profile End Caps - Grey Polycarbonate (Pack of 2)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThese grey polycarbonate end caps close off the open ends of Knightsbridge 1MCOR and 2MCOR aluminium corner LED profiles, preventing dust ingress and giving a finished appearance to profile runs. Each pack contains two end caps and two fixing clips, enough to terminate one length of corner profile or cap both ends of a mitred internal corner.\u003c\/p\u003e\n\u003cp\u003eDesigned for installations where LED strip is recessed into aluminium corner extrusions at wall-ceiling junctions, behind kickboards or along worktop edges, the end caps sit flush with the profile face and hold in place with the supplied clips. The grey finish matches the natural anodised tone of unpainted aluminium extrusions and blends into most interior corners without standing out.\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate material resists impact and temperature changes better than rigid plastic alternatives, which can crack if tightened too firmly or exposed to heat from high-output LED strips. Each cap measures to fit the specific internal diameter of the 1MCOR and 2MCOR corner profiles — they are not compatible with flat or recessed profiles in the Knightsbridge range.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626293_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich profiles are these compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese end caps fit Knightsbridge 1MCOR and 2MCOR aluminium corner profiles only. They do not fit flat, recessed or other profile types in the Knightsbridge LED profile range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many end caps are in a pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach pack contains two end caps and two fixing clips. This is enough to cap both ends of a single profile length, or to cap one end of two separate profile runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the clips require screws?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The fixing clips supplied push-fit into the internal channel of the profile and hold the end cap in place without additional fixings. This allows the cap to be removed if the LED strip needs replacing later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan these be painted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePolycarbonate can be painted with specialist plastic primer and paint, but the grey finish is designed to match unpainted aluminium extrusions and typically does not require painting in most installations.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293622690059,"sku":"1MCORCAP","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/849952_23a5db97-27a7-45db-905d-1557e6581de4.jpg?v=1714661300"},{"product_id":"aluminium-recessed-profile-end-caps-grey-polycarbonate-pack-of-2","title":"Aluminium Recessed Profile End Caps - Grey Polycarbonate (Pack of 2)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThese grey polycarbonate end caps finish the open ends of Knightsbridge 1MREC and 2MREC recessed aluminium LED profiles. Each pack contains two end caps and two fixing clips, providing closure for a single profile run or two separate profile lengths depending on the installation layout.\u003c\/p\u003e\n\u003cp\u003eDesigned for recessed LED strip installations in kitchens, under cabinets, shelving units and architectural lighting runs where the profile ends are visible, the end caps prevent dust ingress and give a clean finished edge to the aluminium channel. The fixing clips attach internally to the profile channel before the end cap is pressed into place, holding the cap securely without external fixings or adhesive.\u003c\/p\u003e\n\u003cp\u003eThe grey polycarbonate construction matches the anodised grey finish common to Knightsbridge's recessed profile range, blending into the profile body when fitted. The polycarbonate material is impact-resistant and maintains dimensional stability across typical indoor temperature ranges. Each end cap sits flush with the profile edge when correctly installed, leaving no protruding lip or gap.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626294_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich profiles are these compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese end caps fit Knightsbridge 1MREC and 2MREC recessed aluminium LED profiles only. They are not compatible with surface-mounted or corner profiles from the same range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow are the end caps fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInsert the fixing clips into the internal channel of the profile at the end you wish to close. Press the end cap onto the profile end until it seats against the clips. No adhesive or external screws are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many ends does one pack cover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne pack contains two end caps, so it can close both ends of a single profile run, or one end each of two separate profile runs depending on your installation.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293622853899,"sku":"1MRECCAP","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/849968_985773ad-6347-42d6-b7cc-d7dfded2841b.jpg?v=1714661303"},{"product_id":"aluminium-floor-recessed-profile-end-caps-grey-polycarbonate-pair","title":"Aluminium Floor Recessed Profile End Caps - Grey Polycarbonate (Pair)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThese polycarbonate end caps seal the open ends of Knightsbridge aluminium floor recessed LED profiles, specifically the 1MFLR (1 metre) and 2MFLR (2 metre) models. Each pack contains two end caps and two fixing clips, sufficient to cap both ends of a single profile run or to seal one end of two separate runs.\u003c\/p\u003e\n\u003cp\u003eDesigned for floor-mounted LED strip installations where the profile sits flush with the finished floor surface, the end caps prevent dust, dirt and moisture from entering the open channel while keeping the LED strip terminals and connections concealed. The fixing clips snap into the profile channel and hold each cap securely in place without adhesive or separate fixings.\u003c\/p\u003e\n\u003cp\u003eThe grey polycarbonate finish matches the typical anodised grey tone of Knightsbridge's aluminium profiles, providing a low-contrast finish that blends with the profile extrusion rather than standing out as a separate component. The polycarbonate material is impact-resistant and suitable for light foot traffic typical of residential and commercial floor installations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626295_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich profiles are these compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese end caps fit the Knightsbridge 1MFLR (1 metre) and 2MFLR (2 metre) aluminium floor recessed LED profiles. They are not compatible with surface-mounted or wall-mounted profile types.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many end caps are included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach pack contains 2 end caps and 2 fixing clips. This is enough to seal both ends of one profile run, or one end of two separate profiles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the caps need to be glued in place?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The included fixing clips snap into the profile channel and hold each cap securely without adhesive. The caps can be removed later if the profile needs to be extended or serviced.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the caps suitable for wet areas?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate construction provides basic moisture resistance for dry and occasionally damp environments. They are not rated for permanent submersion or outdoor installations where standing water may be present.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293623378187,"sku":"1MFLRCAP","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/849958_95996cdb-295b-4981-b462-c6417f8ca548.jpg?v=1714661305"},{"product_id":"aluminium-plaster-in-profile-end-caps-grey-polycarbonate-pack-of-2","title":"Aluminium Plaster-In Profile End Caps - Grey Polycarbonate (Pack of 2)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThese grey polycarbonate end caps seal the open ends of Knightsbridge 1MPLA and 2MPLA aluminium plaster-in LED profiles. Each pack contains two caps, enough to close both ends of a single profile run or one end of two separate runs.\u003c\/p\u003e\n\u003cp\u003eDesigned for recessed LED strip installations where the profile is plastered flush to the wall or ceiling, the end caps sit inside the aluminium channel and create a finished edge at termination points. The grey polycarbonate finish blends with the profile interior and disappears once the surround is plastered and painted. The caps prevent plaster, filler and paint from entering the open ends of the profile during finishing work.\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate construction is lightweight, impact-resistant and does not warp or split during installation. Each cap press-fits into the open end of the compatible profile without requiring adhesive or fixings, and can be removed if access to the LED strip wiring is needed after installation. The caps sit flush with the profile edge, allowing the plaster skim to be taken up to the very end of the recess.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626296_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich profiles are these compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese end caps fit Knightsbridge 1MPLA and 2MPLA aluminium plaster-in profiles. They will not fit surface-mount or corner-mount profiles from other ranges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many caps are in the pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo end caps per pack. You will need one pack to seal both ends of a single profile run, or two packs to seal a run with a join in the middle where both profile sections terminate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the caps need to be glued in place?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The caps press-fit into the open end of the profile and hold by friction. This allows them to be removed later if you need access to the LED strip wiring or need to extend the run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the caps be painted over?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe grey polycarbonate can be painted with emulsion or masonry paint to match the surrounding wall finish. The cap sits recessed inside the profile, so most of its surface is hidden once the plaster skim is complete.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293623574795,"sku":"1MPLACAP","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/849966_f824574a-6748-4db3-9ff8-dd9e5365ba62.jpg?v=1714661307"},{"product_id":"aluminium-surface-mount-profile-end-caps-white-pack-of-2","title":"Aluminium Surface Mount Profile End Caps - White (Pack of 2)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThese white polycarbonate end caps are designed for the Knightsbridge 1MSURW aluminium surface-mount LED profile. Each pack includes two end caps and two fixing clips, providing the parts needed to seal both ends of a single profile length.\u003c\/p\u003e\n\u003cp\u003eThe end caps fit flush to the profile edge, sealing the aluminium extrusion and hiding the cut end of the LED strip inside. The white finish matches the 1MSURW profile's white powder-coated aluminium body, maintaining a continuous appearance along the installation. The included fixing clips secure each cap in place without adhesive, allowing removal for maintenance or repositioning.\u003c\/p\u003e\n\u003cp\u003eIntended for use in residential, retail and commercial LED tape installations where the 1MSURW surface-mount profile is used to house and protect LED strip lighting. The polycarbonate construction is impact-resistant and suitable for indoor applications including under-cabinet lighting, shelving illumination and architectural accent lighting.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626297_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich LED profile are these compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese end caps are designed specifically for the Knightsbridge 1MSURW aluminium surface-mount LED profile. They will not fit other profile models or brands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many end caps are included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach pack contains two end caps and two fixing clips, enough to seal both ends of one profile length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow are the end caps fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe end caps press into the open end of the 1MSURW profile. The included fixing clips secure each cap in place from inside the profile channel, holding it flush to the profile edge without requiring adhesive.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293623738635,"sku":"1MSURWCAP","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/850084_0be41ae5-67e4-4db6-acf7-2c8ec540e868.jpg?v=1714661309"},{"product_id":"aluminium-surface-mount-profile-end-caps-black","title":"Aluminium Surface Mount Profile End Caps - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThese black polycarbonate end caps seal the ends of Knightsbridge 1MSURBK aluminium surface mount LED profiles, preventing dust ingress and providing a clean termination at each end of the profile run. The pack includes two end caps and two fixing clips that secure the caps to the profile without adhesive.\u003c\/p\u003e\n\u003cp\u003eUsed in commercial and residential LED strip installations where the profile run terminates at a wall, corner or break in the installation, the end caps prevent exposed aluminium edges and keep dust and debris out of the profile channel. The fixing clips push into the profile track and hold each end cap in place without additional fasteners.\u003c\/p\u003e\n\u003cp\u003eThe black polycarbonate matches the black finish option on the 1MSURBK profile itself, maintaining a consistent colour across the installation. Each cap measures to fit the specific internal dimensions of the 1MSURBK profile channel, so they are not compatible with other profile ranges or manufacturers.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626298_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich profile are these end caps compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese end caps are designed specifically for the Knightsbridge 1MSURBK aluminium surface mount profile. They are not interchangeable with other Knightsbridge profiles or third-party LED profile systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow are the end caps fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach end cap is secured using the included fixing clips. The clips push into the profile track and hold the cap in place without adhesive or screws. The LED strip should be terminated before the end cap is fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included in the pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach pack contains two black polycarbonate end caps and two fixing clips, enough to seal both ends of a single profile length.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293623869707,"sku":"1MSURBKCAP","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/873704_c41772f4-1c41-40e1-a879-01c3b8edcf52.jpg?v=1714661312"},{"product_id":"12v-24v-led-strip-to-strip-connector-single-colour-8mm","title":"12V\/24V LED Strip to Strip Connector - Single Colour 8mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge strip-to-strip connector joins two lengths of 8mm single-colour LED flex without soldering. The polycarbonate housing measures 24mm x 12mm x 7mm and uses a clip mechanism on each end to lock onto the copper pads of the flex strip, establishing electrical contact for both 12V and 24V low-voltage systems.\u003c\/p\u003e\n\u003cp\u003eDesigned for indoor accent lighting installations where LED flex runs need to turn corners, span gaps, or extend beyond a single 5m reel, the connector maintains power continuity across the join. The IP20 rating limits use to dry interior locations such as under-cabinet lighting in kitchens, shelf lighting in retail display units, cove lighting in living rooms, and architectural accent strips in hallways or staircases.\u003c\/p\u003e\n\u003cp\u003eThe black polycarbonate finish sits flush against the back of the LED strip once clipped, keeping the connector low-profile when the installation is viewed from the front. Class III construction means the connector operates safely at extra-low voltage with no risk of mains electric contact. The clip design allows the connector to be removed and repositioned during testing or reconfiguration without damaging the flex strip, provided the copper contact pads remain clean.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e24 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626299_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with RGB or colour-changing LED strip?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This connector is designed only for single-colour LED flex with two copper contact pads. RGB and RGBW strips require 4-pin or 5-pin connectors to carry the separate colour channels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs soldering required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connector uses a clip mechanism that presses internal contact pins onto the copper pads of the LED strip. Ensure the copper pads are clean and free from oxidation before clipping the connector into place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the connector is not protected against moisture ingress and must only be used in dry indoor locations. Outdoor or bathroom installations require IP65 or IP67 rated connectors and matching flex.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width of LED strip does it fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is sized for 8mm-wide single-colour LED flex. It will not fit 10mm-wide strips or narrow 5mm variants. Check the strip width specification before ordering.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293624066315,"sku":"LFCON2SS","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/807710_81ad3a3e-185f-4d21-bf4f-1f5f3138e5fa.jpg?v=1714661314"},{"product_id":"12v-24v-led-flex-strip-to-strip-150mm-connector-single-colour-8mm","title":"12V\/24V LED Flex Strip to Strip 150mm Connector - Single Colour 8mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge strip-to-strip connector joins two sections of 8mm single-colour LED flex with a 150mm cable bridge, rated for 12V or 24V low-voltage installations. The connector uses a tool-free click mechanism that grips the copper contact pads on the flex strip without soldering, cutting or stripping wires.\u003c\/p\u003e\n\u003cp\u003eDesigned for extending LED flex runs in under-cabinet lighting, cove lighting, shelving accent lighting and retail display installations where a continuous run needs to navigate corners or span gaps between fixed sections. The 150mm cable length allows the connector to bridge around obstacles, route through narrow gaps behind furniture, or transition between surfaces without pulling tension on the flex itself.\u003c\/p\u003e\n\u003cp\u003eThe black polycarbonate housing measures 190mm total length including both clip connectors, 12mm wide and 7mm deep, keeping the assembly low-profile enough to fit within typical LED channel profiles. The IP20 rating restricts use to dry indoor environments only. The connector maintains full electrical continuity across the join, preventing voltage drop or flickering between strip sections when correctly seated.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e190 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626300_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED flex does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis connector is designed for 8mm-wide single-colour LED flex only. It will not fit RGB, RGBW or dual-white flex strips, which use different contact pad configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require soldering?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connector uses a spring-loaded clip mechanism that grips the copper contact pads on the flex strip when the cover is closed. No tools, soldering or wire stripping are needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the connector is not sealed against moisture or dust ingress and must only be used in dry indoor locations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much current can it handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is rated for Class III low-voltage installations at 12V or 24V. Maximum current capacity depends on the gauge of the internal wiring and the contact surface area — consult the datasheet linked above for exact current ratings if running high-density LED flex.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293624393995,"sku":"LFCON2FX","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/807688_1f95d956-96dd-4b7f-95cd-01802e70b861.jpg?v=1714661316"},{"product_id":"12v-24v-led-flex-strip-to-strip-connector-rgb-cct-10mm","title":"12V\/24V LED Flex Strip-to-Strip Connector - RGB\/CCT 10mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LFCON4FX is a strip-to-strip connector designed for joining 10mm RGB or CCT LED flex strips without soldering. The connector uses a snap-fit polycarbonate housing with a 150mm cable bridge between two terminal blocks, each accepting one LED strip end. Once clicked in place, the connector maintains electrical continuity for power and data signals, enabling RGB colour sequences or CCT tunable-white transitions to run uninterrupted across multiple strip sections.\u003c\/p\u003e\n\u003cp\u003eDesigned for architectural lighting installations, under-cabinet runs, cove lighting and display lighting where multiple LED strip reels need to be joined mid-run, the connector handles both 12V and 24V DC supplies. The IP20 rating suits dry indoor locations only — it is not rated for bathrooms, outdoor use or contact with moisture. The black polycarbonate shell measures 14mm wide and 7mm in profile, allowing it to sit flush against most ceiling or cabinet recesses without visible projection.\u003c\/p\u003e\n\u003cp\u003eThe snap-fit terminal blocks grip the copper pads on the end of each LED strip section, eliminating the need for screw terminals or soldered joints. This means a strip-to-strip joint can be assembled on-site in under 60 seconds once the strip ends are cut and prepared. The 150mm cable length provides enough slack to route the connector behind a trim piece or inside a channel without tension on the strip ends.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e190 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626301_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat LED strips is this compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is designed for 10mm wide RGB or CCT LED flex strips operating on 12V or 24V DC. It fits Knightsbridge's LFC24xx series and other 10mm strips with matching copper pad layouts. Confirm pad alignment before ordering if using third-party strips.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors or in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the connector is only suitable for dry indoor locations. It is not rated for contact with moisture, steam or outdoor weather exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require soldering?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connector uses a snap-fit terminal block design that grips the copper pads on each LED strip end without soldering, screw terminals or additional tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cable length between the two connectors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable bridge measures 150mm between the two terminal blocks, providing enough slack to route the connector behind trim or inside an aluminium channel without tension on the strip ends.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293624590603,"sku":"LFCON4FX","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/807696_0633073e-028d-4a16-8251-fc8a6a66b335.jpg?v=1714661318"},{"product_id":"12v-24v-led-flex-strip-to-strip-connector-rgbw-12mm","title":"12V\/24V LED Flex Strip to Strip Connector - RGBW 12mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LFCON5FX is a strip-to-strip connector for 12mm RGBW LED flex, operating on 12V or 24V DC. The connector joins two separate RGBW LED strip sections with a 150mm cable bridge, maintaining power and control signals across five conductors (red, green, blue, white, and common). Each end features a black polycarbonate click-fit housing that grips the strip's copper contact pads without soldering or tools.\u003c\/p\u003e\n\u003cp\u003eDesigned for modular LED installations where strips need to bridge gaps, turn corners, or route around obstacles, the connector suits under-cabinet lighting, display cases, home cinema rooms, and commercial accent lighting. The 150mm cable length allows the strip to navigate around a worktop corner, pass behind a picture frame, or jump across a shelf bracket while keeping the LED run continuous. The IP20 rating limits use to dry indoor locations.\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate housing measures 17mm wide by 7mm thick, sitting flush against surfaces where strips are mounted. The click-fit mechanism locks the strip in place with a tactile snap, and can be released by pressing the side tab if the run needs to be reconfigured. The five-conductor cable maintains separate control of red, green, blue, and white channels, so colour-changing effects programmed into an RGBW controller remain synchronised across the join.\u003c\/p\u003e\n\u003cp\u003eClass III construction means the connector operates exclusively on extra-low voltage (12V\/24V DC) supplied from a separate driver or controller, with no direct connection to mains voltage. The connector carries the current load of the LED strip sections it joins — ensure the total wattage of connected strips remains within the rated capacity of the upstream power supply and controller.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\" style=\"width: 100%; height: 175.4px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 18.6px;\"\u003e\n\u003ctd style=\"width: 51.3002%; height: 18.6px;\"\u003eLength\u003c\/td\u003e\n\u003ctd style=\"width: 46.2181%; height: 18.6px;\"\u003e190 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 51.3002%; height: 19.6px;\"\u003eWidth\u003c\/td\u003e\n\u003ctd style=\"width: 46.2181%; height: 19.6px;\"\u003e17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 51.3002%; height: 19.6px;\"\u003eProjection\u003c\/td\u003e\n\u003ctd style=\"width: 46.2181%; height: 19.6px;\"\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 51.3002%; height: 19.6px;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"width: 46.2181%; height: 19.6px;\"\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 51.3002%; height: 19.6px;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"width: 46.2181%; height: 19.6px;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 51.3002%; height: 19.6px;\"\u003eClass\u003c\/td\u003e\n\u003ctd style=\"width: 46.2181%; height: 19.6px;\"\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 51.3002%; height: 19.6px;\"\u003eIP Rating\u003c\/td\u003e\n\u003ctd style=\"width: 46.2181%; height: 19.6px;\"\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 51.3002%; height: 19.6px;\"\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 46.2181%; height: 19.6px;\"\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 51.3002%; height: 19.6px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"width: 46.2181%; height: 19.6px;\"\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626302_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED strip does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis connector is designed for 12mm-wide RGBW LED flex strips. It will not fit 8mm or 10mm strips, nor single-colour or RGB-only strips that have fewer than five conductors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the connector is not protected against moisture or dust ingress and must only be used in dry indoor locations. For outdoor or bathroom LED installations, use IP65 or IP67 rated connectors and strips.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with both 12V and 24V strips?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The connector carries the DC voltage from one strip section to another without regulating or transforming it, so it works equally with 12V or 24V RGBW LED flex. Ensure all components in the same run (strips, power supply, controller) operate at the same voltage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the connection be undone and reused?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The click-fit mechanism can be released by pressing the side tab on each connector housing, allowing the strip to be removed and the connector to be repositioned or reused on a different strip section.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293625114891,"sku":"LFCON5FX","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/907082_c381e760-61eb-43e4-850f-f9fec9bc0136.jpg?v=1714661325"},{"product_id":"12v-24v-ip65-led-flex-wire-to-strip-connector-single-colour-10mm","title":"12V\/24V IP65 LED Flex Wire to Strip Connector - Single Colour 10mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge wire-to-strip connector joins a power cable to 10mm single-colour LED flex using a clip-in polycarbonate housing rated at IP65. The connector accepts 12V or 24V low-voltage input and requires no soldering or specialist tools — the LED strip slots into one end, the wire into the other, and spring-loaded contacts make the electrical connection when the cover clips shut.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, kitchens, under-cabinet installations and covered outdoor areas where moisture ingress is a concern, the IP65 rating protects the electrical contacts from water jets and dust. The 26mm length and 15mm width give a compact footprint that fits into shallow installation gaps behind pelmets, inside aluminium extrusions, and under wall-mounted cabinets. The short cable tail allows neat routing around corners without exposing bare strip ends.\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate body resists minor impacts and UV degradation better than standard PVC housings. For installations subject to frequent splashing or submersion, applying a bead of silicone sealant (sold separately) around the cable entry and strip entry points strengthens the IP65 seal. The connector is compatible with Knightsbridge LFC24IPxx series single-colour LED flex and other 10mm-wide single-colour strips using the same contact spacing.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e26 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626303_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_832604.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this connector require soldering?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connector uses spring-loaded contacts inside a clip-shut polycarbonate housing. Slot the LED strip into one end and the power cable into the other, then close the cover to complete the connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED strip does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is designed for 10mm-wide single-colour LED flex. It is compatible with Knightsbridge LFC24IPxx series strips and other 10mm single-colour strips with the same contact spacing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating protects against water jets and dust, making it suitable for covered outdoor areas such as under eaves, canopies or pergolas. It is not rated for full submersion. For installations subject to frequent splashing, apply silicone sealant around the cable and strip entry points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used with 12V and 24V systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The connector accepts both 12V and 24V low-voltage input. Ensure the LED flex being connected is rated for the same voltage as the power supply.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293625409803,"sku":"LFCONIP2WS","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/807718_d8821cc5-6594-44b5-a8de-139f36e582f8.jpg?v=1714661328"},{"product_id":"ip65-led-strip-to-strip-connector-12v-24v-single-colour-10mm","title":"IP65 LED Strip to Strip Connector 12V\/24V - Single Colour 10mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis IP65 LED strip to strip connector joins two sections of 12V or 24V single colour 10mm LED flex in a straight line, maintaining electrical continuity without soldering. The polycarbonate housing carries an IP65 rating, protecting the connection against water jets and dust ingress in kitchens, bathrooms, and partially sheltered outdoor installations.\u003c\/p\u003e\n\u003cp\u003eThe connector uses a click-fit mechanism that grips both strip ends inside the housing via spring-loaded brass contacts. Strip the adhesive backing from the last 10-15mm of each LED flex end, insert each strip into the corresponding slot on the connector, and press until the click confirms contact. No tools are required for installation. For additional waterproofing in IP65-rated runs, silicone sealant (sold separately) can be applied along the entry points where the flex enters the connector housing.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with Knightsbridge LFC24IPxx single colour LED flex series, the connector measures 26mm in length, 15mm in width and projects 7mm from the mounting surface once installed. The black polycarbonate finish blends into most LED flex backing tapes and mounting channels, reducing visibility in final installations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e26 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626307_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_832602.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat LED flex is this compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is designed for Knightsbridge LFC24IPxx series single colour 10mm LED flex running on 12V or 24V. It will not fit RGB or RGBW strips, which require four-pin connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it maintain the IP65 rating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, when correctly installed. For full IP65 protection in wet environments, apply silicone sealant along the entry points where the LED flex enters the connector housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating protects against water jets and dust, making it suitable for partially sheltered outdoor areas such as covered patios or soffit lighting. It is not rated for full submersion or constant exposure to heavy rain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs soldering required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The click-fit mechanism uses spring-loaded brass contacts to grip the copper pads on the LED flex. Strip the backing, insert the flex ends, and press until the connector clicks shut.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293625770251,"sku":"LFCONIP2SS","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/807724_b1a4dcaf-f90e-4e8c-8a15-0b49ad1ba7e3.jpg?v=1714661330"},{"product_id":"12v-24v-ip65-led-strip-to-strip-150mm-connector-single-colour","title":"12V\/24V IP65 LED Strip to Strip 150mm Connector - Single Colour","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge IP65 strip-to-strip connector links two sections of 10mm single-colour LED flex with a 150mm cable run between them, allowing LED strips to extend around corners, across cabinet joins, or between separated mounting surfaces without a visible gap. The connector accepts 12V or 24V single-colour LED flex strips and uses polycarbonate click-fit housings at each end to grip the strip without soldering or tools.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchen under-cabinet lighting, retail display cases, architectural cove lighting and sheltered outdoor installations, the connector maintains IP65 moisture resistance when correctly fitted. The 150mm cable gives enough reach to route between surfaces that aren't directly adjacent, such as two wall-mounted shelves or L-shaped cabinet runs. The black polycarbonate housing blends into typical LED strip installations and the Class III rating confirms low-voltage safety.\u003c\/p\u003e\n\u003cp\u003eEach connector end clips onto the copper contact pads on the LED strip, holding the strip securely while making electrical contact. For installations in high-humidity environments or where the IP65 rating must be guaranteed long-term, the connector housings can be reinforced with silicone sealant (sold separately) applied around the strip entry points. The 190mm overall length includes the housings at each end plus the 150mm cable span.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e190 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626308_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_832600.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED strip does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is designed for 10mm-wide single-colour LED flex strips. It will not fit RGB or RGBW strips, which use different contact pad configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the connector weatherproof?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector carries an IP65 rating, which protects against low-pressure water jets and dust ingress when correctly fitted. For long-term outdoor use or high-humidity environments, apply silicone sealant around the strip entry points to reinforce the seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require soldering or tools?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The polycarbonate housings use a click-fit mechanism that grips the LED strip and makes electrical contact with the copper pads. Insert the strip into the housing and press the clip shut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used with both 12V and 24V strips?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The connector is passive and simply carries the voltage from one strip section to the next, so it works with both 12V and 24V single-colour LED flex.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293625966859,"sku":"LFCONIP2FX","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/807734_d31df664-33fd-41a9-a04b-694e4b106cba.jpg?v=1714661333"},{"product_id":"12v-24v-ip65-led-flex-strip-to-strip-150mm-connector-cct-rgb","title":"12V\/24V IP65 LED Flex Strip to Strip 150mm Connector - CCT\/RGB","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis IP65-rated strip-to-strip connector joins two sections of 12V or 24V CCT or RGB LED flex strip with a 150mm cable bridge between them. The connector accommodates 12mm-wide LED flex and uses a polycarbonate housing with clip-in terminals at each end, allowing LED strips to be linked across gaps, around corners, or between separate installation zones without cutting and soldering.\u003c\/p\u003e\n\u003cp\u003eDesigned for under-cabinet lighting, retail display installations, and indoor architectural lighting where LED strips cannot run continuously, the 150mm cable length provides enough slack to route the connection behind shelving, around cabinet frames, or through concealed channels. The IP65 rating protects the connection against dust ingress and low-pressure water jets, making the connector suitable for kitchen splashback areas, bathroom mirror lighting, and sheltered outdoor signage where occasional moisture exposure occurs.\u003c\/p\u003e\n\u003cp\u003eThe click-fit connection mechanism grips the copper contact pads on the LED strip without requiring soldering or crimping tools. Each end of the connector has a hinged polycarbonate cover that clips down over the strip once it's positioned, securing the electrical contact and providing strain relief on the cable. For installations where full IP65 protection must be maintained across the join, Knightsbridge recommends sealing the clip-in covers with silicone adhesive (sold separately) to prevent moisture wicking under the cover during cleaning or condensation events.\u003c\/p\u003e\n\u003cp\u003eThe 190mm total length (including both connector housings and the 150mm cable run) adds minimal projection to the installation. The connector fits behind typical kitchen plinths, inside aluminium LED profiles, and within shallow display case channels where space is limited. The black polycarbonate finish blends into dark surfaces and shadow gaps, reducing visual impact when the connector is partially exposed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e190 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626310_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_832606.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED strip does this connector fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is designed for 12mm-wide LED flex strip. It is compatible with Knightsbridge LFC24IPxx series RGB and CCT strips, but will also work with other brands' 12mm flex strips that use the same contact pad spacing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the IP65 rating require additional sealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector carries an IP65 rating out of the box, but Knightsbridge recommends applying silicone adhesive around the clip-in covers to maintain full IP protection in wet environments such as bathroom mirror lighting or outdoor sheltered installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this connector be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, but only in sheltered locations. The IP65 rating protects against dust and low-pressure water jets (rain, splashes), but the connector should not be submerged or exposed to standing water. Suitable for covered patio lighting, signage under canopies, or recessed outdoor alcoves.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs soldering required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connector uses a click-fit mechanism where the LED strip is inserted into the terminal housing and secured by a hinged polycarbonate cover. No tools or soldering are needed, though a small screwdriver may help to open the cover on some units.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293627179275,"sku":"LFCONIP4FX","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/807740_c8d99a39-0ff7-4898-b2c0-375b9fbe72b6.jpg?v=1714661335"},{"product_id":"12v-24v-led-flex-3-way-t-connector-single-colour-8mm","title":"12V\/24V LED Flex 3-Way T-Connector - Single Colour 8mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LFCON2T is a 3-way T-connector for joining 8mm single-colour LED flex at 12V\/24V installations. The connector links three separate LED flex runs at a single junction point, allowing one incoming feed to split into two outgoing branches or two feeds to merge into one continuous run. Built from copper with a white finish, the connector measures 30mm × 19mm with a 0.3mm profile.\u003c\/p\u003e\n\u003cp\u003eDesigned for under-cabinet lighting, cove lighting and architectural accent installations where LED flex needs to branch or merge at right angles, the T-connector pairs with Knightsbridge LED flex strip-to-strip connectors (sold separately) for solder-free joining. The connector can be oriented to create right-hand or left-hand corner configurations depending on which of the three terminals receives the incoming feed. Installation requires no soldering — the strip-to-strip connectors clip onto the T-connector terminals and grip the LED flex copper pads.\u003c\/p\u003e\n\u003cp\u003eThe copper construction maintains consistent conductivity across all three junctions, preventing voltage drop or brightness variation at the T-junction when correctly installed with appropriate gauge flex and power supply. The white finish blends with white LED flex backing or painted surfaces in ceiling coves and cabinet underhangs. The IP20 rating restricts use to dry indoor locations — the connector is not suitable for bathrooms, outdoor installations or any environment where moisture is present.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e19 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e0.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eCopper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626312_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat LED flex width does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is designed for 8mm single-colour LED flex only. It is not compatible with RGB, dual-white or wider LED flex formats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need additional components to join the flex?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The T-connector requires Knightsbridge LED flex strip-to-strip connectors (sold separately) to join the LED flex to each of the three terminals. The strip-to-strip connectors clip onto the T-connector terminals and grip the copper pads on the LED flex.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used outdoors or in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the connector is suitable for dry indoor locations only. It cannot be used in bathrooms, kitchens near sinks, or any outdoor installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the orientation matter for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The T-connector can be oriented to create right-hand or left-hand corner configurations depending on which of the three terminals receives the incoming power feed. Plan the layout before cutting and connecting the LED flex.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293627474187,"sku":"LFCON2T","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/807742_f1065432-baf0-453d-8663-07d5b9d14a9b.jpg?v=1714661338"},{"product_id":"12v-24v-led-flex-4-way-x-connector-single-colour-8mm","title":"12V\/24V LED Flex 4-Way X-Connector - Single Colour 8mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LFCON2X is a 4-way X-connector designed for single-colour 8mm LED flex strips operating at 12V or 24V. The connector allows four separate LED flex segments to meet at a central junction point, creating symmetrical grid layouts, branching patterns, or multi-directional lighting runs without additional wiring or soldering.\u003c\/p\u003e\n\u003cp\u003eSuited to retail display lighting, under-cabinet installations, architectural accent lighting, and residential LED flex projects, the connector enables lighting paths to split or converge at 90-degree angles from a central hub. Each of the four arms accepts an 8mm single-colour LED flex strip via a separate push-fit connector (sold separately as LFCON2SS or LFCON2P), which clips onto the copper contact pads and secures the flex mechanically and electrically.\u003c\/p\u003e\n\u003cp\u003eThe connector body measures 24mm x 24mm with a 0.3mm profile, sitting flush against mounting surfaces once the flex is installed. Constructed from copper with a white finish, it remains visually unobtrusive beneath or alongside the LED flex itself. The IP20 rating limits use to dry indoor environments, while the Class III designation confirms it operates at extra-low voltage (12V or 24V DC) for safe handling during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e24 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e24 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e0.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eCopper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626313_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat additional connectors are needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis X-connector requires four separate strip-to-strip connectors to secure each LED flex segment to the copper pads. Knightsbridge models LFCON2SS and LFCON2P are compatible. Each flex segment needs its own connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with RGB or colour-changing LED flex?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This connector is designed specifically for single-colour 8mm LED flex. RGB and RGBW flex require multi-channel connectors with additional contact points for separate colour control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used outdoors or in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating limits use to dry indoor locations away from moisture. For bathrooms or outdoor installations, a higher IP-rated connector and compatible LED flex are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat voltage does this support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector supports both 12V and 24V DC LED flex systems. Ensure all connected flex segments and the power supply operate at the same voltage to avoid damage or uneven brightness.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293627670795,"sku":"LFCON2X","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/807746_3ae36c66-6906-4242-b5fe-8bcb77e3f633.jpg?v=1714661340"},{"product_id":"12v-24v-led-flex-strip-to-strip-connector-8mm-single-colour-pack-of-2","title":"12V\/24V LED Flex Strip-to-Strip Connector - 8mm Single Colour (Pack of 2)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LFCON2P is a strip-to-strip connector for linking 8mm single-colour LED flex strips end-to-end without soldering. Rated for 12V or 24V DC operation, each connector uses a click-fit mechanism that grips the copper contact pads on each strip end and holds them in place inside a white polycarbonate housing measuring 20mm x 11mm x 4.5mm projection from the strip face.\u003c\/p\u003e\n\u003cp\u003eDesigned for accent lighting, under-cabinet runs, shelf lighting and display cases where a single reel of LED flex needs to be joined to another to extend the run or change direction, the connector eliminates the need for soldering skills or crimping tools. The strips slide into opposing sides of the connector housing, and the internal spring contacts press against the copper pads to complete the circuit. The IP20 rating suits dry indoor environments only.\u003c\/p\u003e\n\u003cp\u003eThe pack of two connectors covers a single join plus a spare, or two separate joins in larger installations. The white polycarbonate finish blends against white or neutral-toned surfaces, and the 4.5mm profile sits low enough to be concealed under shelving, behind pelmets or inside aluminium extrusion channels designed for LED flex. Class III construction means the connectors operate at extra-low voltage (below 50V AC \/ 120V DC) and do not require earthing.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e11 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626314_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with RGB or colour-changing LED strip?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This connector is for single-colour LED flex only (strips with two copper contact pads). RGB and RGBW strips require connectors with four or five contact points to handle separate colour channels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to solder the LED strip into the connector?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connector uses a tool-free click mechanism. The LED flex slides into the housing and internal spring contacts press against the copper pads on the strip to complete the circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width of LED strip does it fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is sized for 8mm-wide single-colour LED flex. Strips of other widths (10mm, 12mm) will not fit this housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used outdoors or in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the connector is suitable for dry indoor environments only. It is not protected against moisture ingress and should not be used in bathrooms, kitchens near sinks, or any outdoor application.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293627867403,"sku":"LFCON2P","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/807754_03a683be-b853-47b6-b00e-4a38deb373fd.jpg?v=1714661343"},{"product_id":"12v-24v-led-strip-to-strip-connector-8mm-single-colour","title":"12V\/24V LED Strip to Strip Connector - 8mm Single Colour","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge strip-to-strip connector joins two lengths of 8mm single-colour LED flex without soldering, using a click-fit mechanism on each end of a 150mm cable. The connector accepts 12V or 24V DC LED strip and maintains continuity across the join, allowing continuous runs where a gap or corner requires two separate strip sections to be linked.\u003c\/p\u003e\n\u003cp\u003eDesigned for interior installations where LED flex needs to turn a corner, bridge a gap between cabinets, or connect two reels into a longer run, the connector fits 8mm-wide single-colour LED flex only (not suitable for RGB or dual-white strip). The 150mm cable length between the two clips provides enough slack to route the connection behind a pelmet, inside a cabinet frame, or along the back of a display shelf without visible strain on the strip.\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate housing measures 132mm long overall with an 11mm width and 4.5mm projection from the strip surface once clipped in place. The IP20 rating suits dry interior use in living rooms, kitchens, retail displays, and office accent lighting. The black finish blends into the gap between LED sections and stays discrete against dark surfaces or behind diffusers.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e132 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e11 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626315_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED strip does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis connector is designed for 8mm-wide single-colour LED flex only. It will not fit 10mm or 12mm strip, and it is not compatible with RGB or dual-white LED flex that requires more than two conductors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require soldering?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connector uses a click-fit mechanism at each end. The LED strip slides into the clip and locks in place, making contact with the internal conductors without any soldering or crimping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the connector is suitable for dry interior locations only. For outdoor or damp environments, an IP65 or IP67-rated connector is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the 150mm cable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 150mm cable between the two clips allows the connector to bridge a gap, turn a corner, or link two sections of LED strip where a direct join is not possible. This length provides routing flexibility without visible strain on the strip.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293628162315,"sku":"LFCONSS2P","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/807762_666192d2-30a4-42a7-a22e-497981b72fbd.jpg?v=1714661346"},{"product_id":"led-strip-light-silicone-glue-10ml-clear","title":"LED Strip Light Silicone Glue 10ml - Clear","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LED strip silicone glue is a 10ml tube of clear silicone adhesive designed for bonding LED strip light to mounting surfaces and sealing cut ends after installation. The adhesive comes in a squeeze tube with a fine applicator tip that allows controlled dispensing along the back of LED strip tape or around cut strip ends.\u003c\/p\u003e\n\u003cp\u003eUsed during LED strip installation in kitchens, under-cabinet lighting, cove lighting and architectural applications where mechanical clips or standard adhesive backing may not provide sufficient hold on textured, angled or outdoor-rated surfaces. The silicone bonds to aluminium extrusions, plasterboard, timber, painted surfaces and most plastics. Once cured, the clear silicone becomes waterproof, making it suitable for sealing strip ends in IP-rated installations or where moisture exposure is possible.\u003c\/p\u003e\n\u003cp\u003eThe 10ml tube provides enough adhesive for approximately 2-3 metres of strip bonding or sealing multiple cut ends depending on bead thickness. The silicone sets within 24 hours at room temperature and remains flexible after curing, allowing for minor thermal expansion of aluminium profiles without cracking. Replacement applicator caps are available separately in packs of 10 (LFCCAP) if the original cap blocks or is lost.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eSilicone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4626316_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat surfaces does this bond to?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe silicone adhesive bonds to aluminium LED profiles, plasterboard, painted surfaces, timber and most plastics. Clean the surface with isopropyl alcohol before application to remove dust and grease for best adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it take to cure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe silicone sets within 24 hours at room temperature. Avoid disturbing the bond during this period. Full waterproof performance develops after curing completes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used to seal cut strip ends?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Apply a small bead around the cut end of LED strip to seal the exposed copper contacts and prevent moisture ingress in bathroom or outdoor installations. This is particularly important for maintaining IP ratings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much strip does one tube cover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 10ml tube provides approximately 2-3 metres of bonding depending on bead thickness, or can seal multiple cut strip ends. For larger installations, multiple tubes may be needed.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293628195083,"sku":"LFCONIPG","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/807764_877b2c3b-a361-4c3a-b2d4-5f2f15910664.jpg?v=1714661348"},{"product_id":"12v-24v-in-line-rf-controller-remote-dimmer-single-colour-led-strip","title":"12V\/24V In-Line RF Controller \u0026 Remote Dimmer - Single Colour LED Strip","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LEDFRA1 is an in-line RF dimmer controller for single-colour 12V or 24V LED strip lighting, supplied with a wireless remote offering eight brightness levels from 10% to 100%. The controller sits between the LED driver and the LED strip, connecting via standard strip connectors without requiring additional wiring knowledge.\u003c\/p\u003e\n\u003cp\u003eDesigned for under-cabinet lighting, display shelving, cove lighting and anywhere single-colour LED strip needs dimming control, the controller handles up to 72W at 12V or 144W at 24V. The wireless RF remote operates within a 15m range and works through walls and cabinet doors, so the controller can be hidden behind furniture or inside cupboards without affecting signal reception. Eight preset brightness buttons (10%, 20%, 40%, 60%, 80%, 100%, plus two brightness-adjustment buttons) allow immediate jumps to common light levels without stepping through increments.\u003c\/p\u003e\n\u003cp\u003eThe controller housing is a compact 57mm x 6mm white polycarbonate unit rated IP20 for indoor dry locations. It connects inline between the driver output and the LED strip using push-fit connectors supplied in the box. The remote runs on a CR2032 battery (included) and stores the last brightness setting when powered off, so the strip returns to the same level when switched back on. Class III isolation means the controller operates entirely on low-voltage DC and presents no mains shock risk once installed downstream of the driver.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e57 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4693782_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1187042.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with RGB or colour-changing LED strip?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The LEDFRA1 is designed for single-colour LED strip only (warm white, cool white, or single-colour runs). For RGB or RGBW strip, a multi-channel controller is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum LED strip length this can control?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe controller handles up to 72W at 12V (equivalent to approximately 6m of standard 12W\/m strip) or 144W at 24V (approximately 12m of 12W\/m strip). The actual maximum length depends on the power consumption per metre of your specific LED strip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple controllers be paired to one remote?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge RF controllers typically pair one remote to one controller. If you need to control multiple zones independently, each zone requires its own controller and remote. Consult the manual for pairing instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the controller remember the brightness setting when turned off?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The controller stores the last brightness level in memory. When power is restored or the remote is used to turn the strip back on, it returns to the same brightness setting.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293641302283,"sku":"LEDFRA1","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/975016_2bc82ec5-b5f1-4c9c-bbb7-5f762e454e85.jpg?v=1714661638"},{"product_id":"12v-24v-rf-touch-controller-remote-rgbw-led-strip","title":"12V\/24V RF Touch Controller \u0026 Remote - RGBW LED Strip","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge LEDFRA6 is a wireless RF controller and touch remote for RGBW LED strip lighting, operating on 12V or 24V DC systems. The controller handles up to 288W on 12V installations or 576W on 24V installations, enough to drive approximately 5 metres of high-density RGBW strip at 12V or 10 metres at 24V depending on strip wattage per metre. The wireless RF signal operates up to 30 metres line-of-sight between the remote and controller.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and retail LED strip installations where colour-changing or tuneable white lighting is needed without wired wall controls, the system allows users to select from the full RGBW colour spectrum via the touch remote's colour wheel interface. The remote includes brightness control, dynamic mode selection, and speed adjustment for colour-changing effects. The controller unit sits between the power supply and the LED strip, typically concealed in a ceiling void, under-cabinet space or behind furniture.\u003c\/p\u003e\n\u003cp\u003eThe controller measures 85mm x 45mm x 23mm in a white polycarbonate housing rated IP20 for dry indoor use only. Four output terminals on the controller connect to the RGBW strip's four channels (red, green, blue, white), while input terminals connect to the 12V or 24V DC power supply. The touch remote requires two AAA batteries (not included) and features a colour wheel printed on the faceplate with capacitive touch zones for brightness, mode and speed control below the wheel.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e23 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4722526_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1187046.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length of RGBW LED strip can this controller handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 12V the controller supports up to 288W, which typically allows 4-5 metres of high-density RGBW strip (around 60W per metre). At 24V the controller supports up to 576W, allowing approximately 10 metres of the same strip density. Always check your specific strip's wattage per metre and calculate total run length accordingly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the remote need line-of-sight to the controller?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The RF signal operates through walls, ceilings and furniture within a 30-metre range. This differs from infrared remotes which require direct line-of-sight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple controllers be paired to one remote?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe product manual details pairing procedures. Typically RF remotes can control multiple zones if the controllers are set to the same channel, but consult the manual linked above for specific instructions on multi-zone setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the controller suitable for outdoor LED strip installations?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The controller is rated IP20 for dry indoor use only. For outdoor or bathroom installations you need an IP65 or IP67 rated controller designed for damp or wet environments.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293641531659,"sku":"LEDFRA6","price":28.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/975060_1b5f9661-16ab-4338-ba59-2aae4ae8182e.jpg?v=1714661648"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/collections\/1473450_61810f57-345c-4ebf-838d-59c30a5a3f48.jpg?v=1790337824","url":"https:\/\/niori.co.uk\/collections\/led-strip-lighting.oembed?page=15","provider":"Niori","version":"1.0","type":"link"}