{"title":"Kitchen Downlights","description":"\u003cp\u003eDownlights are the default for a kitchen ceiling because they put light on the worktop and take nothing off the headroom. These are recessed fittings in black and white, most on GU10 lamps, with the cut-out stated on every product so you can check it against the holes you already have.\u003c\/p\u003e","products":[{"product_id":"odina-single-fixed-round-downlight-white-gu10","title":"Odina Single Fixed Round Downlight White - GU10","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Odina is a fixed round downlight with an 82mm white die-cast aluminium bezel and a 72mm ceiling cut-out, designed for GU10 bulbs up to 10W. The fitting sits 6mm proud of the ceiling once installed, giving a low-profile finish that suits residential rooms with standard or low ceiling heights.\u003c\/p\u003e\n\u003cp\u003eDesigned for living rooms, bedrooms, hallways and kitchens where a clean recessed light point is needed without the complexity of tilt or directional adjustment, the Odina requires a minimum 70mm void depth above the ceiling for safe installation. The fitting accepts any GU10 bulb (sold separately), allowing choice of colour temperature, beam angle and dimming capability depending on the specific bulb paired with it.\u003c\/p\u003e\n\u003cp\u003eThe white powder-coated aluminium bezel resists corrosion and blends into white or light-painted ceilings, making the fitting itself almost invisible when the light is off. The die-cast construction provides a rigid mounting for the GU10 lamp holder and distributes heat away from the bulb during operation. The IP20 rating confirms suitability for dry indoor locations but not for bathrooms or outdoor use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769292_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954270.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Odina takes a standard GU10 bulb up to 10W. Bulbs are sold separately. Most users pair this with a warm-white LED GU10 between 4-6W and 2700K-3000K for general room lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming capability depends on the GU10 bulb fitted. If you fit a dimmable GU10 LED and pair it with a compatible dimmer switch, the downlight will dim. Non-dimmable GU10 bulbs will not dim regardless of the switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 70mm void above the ceiling is required for safe installation. This allows clearance for the lamp holder, the GU10 bulb body, and thermal dissipation during operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating confirms the fitting is suitable for dry indoor locations only. For bathrooms or other wet environments, an IP65-rated downlight is required to meet UK wiring regulations for zones near water.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293642252555,"sku":"ODA1FRW","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/918978_24eef97c-011e-40b3-be85-49b1c435b18d.jpg?v=1714661667"},{"product_id":"odina-single-fixed-round-downlight-black","title":"Odina Single Fixed Round Downlight - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Odina is an 82mm fixed round downlight cast from die-cast aluminium with a black powder-coated finish and a low 6mm projection from the ceiling plane. The fitting houses a single GU10 lamp holder (bulb sold separately) and accepts any GU10 LED up to 10W, including dimmable variants when paired with a compatible dimmer switch.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and light commercial installation, the Odina requires a 72mm ceiling cut-out and a minimum 70mm ceiling void depth above the plasterboard. The fixed bezel directs light straight downward, making it suitable for general room lighting, hallways, utility spaces and areas where task lighting is needed directly below the fitting. The IP20 rating limits it to dry indoor locations only.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium construction provides heat dissipation for the lamp and structural rigidity during installation. The black finish sits flush with the ceiling once installed, with the curved edge design softening the transition between fitting and ceiling plane. The Class I earthing requires a standard mains earth connection during installation. Knightsbridge produces this fitting in a white finish variant and in squared-edge versions under the same Odina range.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769473_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954268.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 70mm void depth above the plasterboard is required to house the lamp holder and GU10 bulb. The 72mm cut-out diameter accommodates the body of the fitting, with the 82mm bezel sitting proud by 6mm once installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Odina dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimmer compatibility depends on the GU10 bulb fitted. The downlight itself has no electronic components — dimmability is determined by the bulb specification and the dimmer switch used. Pair with a dimmable GU10 LED and a compatible LED dimmer for dimming functionality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means it is not protected against moisture ingress and must only be installed in dry indoor locations. For bathroom installation, a minimum IP44 or IP65 rated fitting is required depending on zone placement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bezel fixed or can it tilt?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the fixed version — the bezel does not tilt and directs light straight downward. Knightsbridge produces a tiltable variant within the Odina range for directional lighting applications.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293642875147,"sku":"ODA1FRB","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/918976_bc805857-1298-41db-b178-48902fed6fe3.jpg?v=1714661670"},{"product_id":"odina-single-fixed-square-downlight-white-gu10","title":"Odina Single Fixed Square Downlight White - GU10","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Odina is an 82mm square fixed downlight in white die-cast aluminium, designed to house a single GU10 bulb (sold separately) up to 10W. The fixed bezel sits 6mm proud of the ceiling surface, giving a clean geometric profile without tilt or rotation adjustment once installed.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and light commercial applications where recessed ceiling lighting is needed, the Odina requires a 72mm ceiling cut-out and a minimum 70mm void depth above the plasterboard. The IP20 rating makes it suitable for dry interior spaces including living rooms, bedrooms, hallways and offices, but not for bathrooms or wet zones. The white powder-coated finish blends into white ceilings or provides geometric contrast against darker painted surfaces.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium construction provides Class I earthed electrical safety and acts as a heatsink for the GU10 bulb, extending LED lifespan compared to enclosed plastic housings. Dimmability depends on the GU10 bulb you choose — pair it with a dimmable Knightsbridge GU10 LED and a compatible trailing-edge dimmer for variable output. The downlight is compatible with Knightsbridge fire-rated hoods where ceiling fire integrity is needed, though the specific hood model must match the cut-out diameter and fire rating requirements.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769478_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954276.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Odina requires a minimum 70mm void depth above the plasterboard for the GU10 lampholder and wiring. The bezel sits 6mm below the ceiling surface once installed, and the 72mm cut-out diameter determines the hole size needed in the plasterboard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb you fit. Pair the Odina with a dimmable Knightsbridge GU10 LED and a compatible trailing-edge dimmer for variable brightness. Non-dimmable GU10 bulbs will operate at full output only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating makes the Odina suitable only for dry interior spaces. For bathrooms or wet zones, look for downlights rated IP44 or IP65 depending on the zone classification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Odina takes a standard GU10 bulb up to 10W, sold separately. Most users pair it with a 5-7W LED GU10 in 3000K or 4000K depending on whether warm or neutral white light is preferred. The die-cast aluminium body acts as a heatsink to extend LED lifespan.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293642907915,"sku":"ODA1FSW","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/918990_a61ca5af-9e15-4894-b433-eba6dcc13774.jpg?v=1714661672"},{"product_id":"odina-single-fixed-square-downlight-black-gu10","title":"Odina Single Fixed Square Downlight - Black GU10","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Odina is an 82mm square fixed downlight made from die-cast aluminium with a black powder-coat finish and a GU10 lamp fitting. The fixed bezel directs light straight down from the ceiling plane without tilt or adjustment, creating accent or task lighting in residential, hospitality and light commercial spaces.\u003c\/p\u003e\n\u003cp\u003eDesigned for recessed ceiling installation with a 72mm cut-out and a minimum 70mm void depth above the ceiling line, the Odina fits joisted ceilings and suspended grid ceilings where that clearance is available. The 6mm projection from the ceiling surface gives a low-profile appearance that suits modern interiors and low-ceiling spaces. The IP20 rating makes this suitable for dry indoor areas — living rooms, bedrooms, offices, corridors, retail display zones — but not bathrooms or wet rooms.\u003c\/p\u003e\n\u003cp\u003eThe black finish provides visual contrast against white ceilings and blends into darker ceiling surfaces where the fitting needs to be less visible when unlit. The square bezel geometry offers an alternative to circular downlights in schemes where architectural details follow rectilinear rather than curved lines. The die-cast aluminium construction dissipates heat from the GU10 lamp efficiently and the Class I electrical classification requires an earth connection during installation.\u003c\/p\u003e\n\u003cp\u003eThe downlight accepts any standard GU10 LED lamp up to 10W (sold separately), giving control over colour temperature (2700K warm white through to 6500K daylight), beam angle (narrow spot, wide flood), and dimming behaviour depending on which GU10 lamp is chosen. Knightsbridge produces compatible GU10 lamps in dimmable, non-dimmable, and SmartKnight Wi-Fi-controllable variants, all of which fit this fitting.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769493_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954272.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat GU10 lamp does this take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Odina accepts any standard GU10 LED lamp up to 10W. Lamps are sold separately. Knightsbridge offers compatible GU10 lamps in warm white (2700K-3000K), neutral white (4000K), and daylight (6000K-6500K) colour temperatures, in dimmable, non-dimmable, and SmartKnight Wi-Fi variants.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 lamp fitted. If a dimmable GU10 lamp is installed, the Odina will dim when paired with a compatible dimmer switch. Non-dimmable GU10 lamps will not dim and may flicker or fail if connected to a dimmer circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 70mm clearance above the ceiling surface is required for safe installation and heat dissipation. The 72mm cut-out fits standard recessed downlight sizing, making this compatible with most joisted and suspended ceilings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the Odina is suitable for dry indoor areas only. Bathrooms require IP44 or IP65-rated fittings depending on zone placement.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293642973451,"sku":"ODA1FSB","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/918988_6603f9b2-d9f4-4c92-85b0-577920f9d493.jpg?v=1714661675"},{"product_id":"odina-single-tilt-round-downlight-gu10-white","title":"Odina Single Tilt Round Downlight GU10 - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Odina is a single tilt round downlight with a GU10 lamp fitting, housed in a die-cast aluminium bezel finished in matt white. The inner lamp holder tilts up to 25° from centre, allowing the beam to be angled towards a feature, a wall or a work surface rather than straight down. The white finish sits flush with the ceiling surface with just 6mm of projection.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and light commercial installation where adjustable accent lighting is needed without a visible track system, the Odina suits kitchens, living rooms, bedroom reading positions, retail displays and hallways. The 72mm cut-out diameter fits standard ceiling voids of 70mm minimum depth and the GU10 base accepts any standard GU10 LED up to 10W (sold separately), giving control over colour temperature and dimmer compatibility.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium construction provides structural rigidity for the tilt mechanism and heat dissipation for LED lamps, while the white powder-coated finish hides ceiling imperfections around the cut-out edge. The IP20 rating restricts the fitting to dry interior locations only. The Odina is Class I, requiring an earth connection during installation, and is compatible with Knightsbridge fire hoods where fire-rated ceilings require additional protection.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e25 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769542_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954286.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does the Odina take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes a standard GU10 bulb up to 10W. Bulbs are sold separately. Most installations use a GU10 LED between 5-7W at 3000K or 4000K depending on room use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimmer compatibility depends on the GU10 bulb fitted. Use a dimmable GU10 LED paired with a compatible LED dimmer switch to enable dimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the 25° tilt mean in practice?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe inner lamp holder rotates 25° from the vertical centre position, allowing the beam to be angled towards a wall, a worktop edge, or a feature rather than straight down. Once set, the tilt position stays locked.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the fitting is not protected against moisture ingress and must only be installed in dry interior rooms. For bathrooms, choose a downlight with IP44 or IP65 rating.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293643170059,"sku":"ODA1TRW","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919002_82db0759-58b0-4b69-ab34-5c3d74873aeb.jpg?v=1714661677"},{"product_id":"odina-single-tilt-round-downlight-gu10-black","title":"Odina Single Tilt Round Downlight GU10 - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Odina is an 82mm round recessed downlight with a tiltable GU10 lamp holder set inside a die-cast aluminium bezel finished in matt black. The lamp holder tilts up to 25° from centre, allowing light to be angled toward a wall, artwork, or specific area of a room rather than casting a fixed vertical beam. The downlight requires a 72mm ceiling cut-out and a minimum 70mm void above the ceiling line.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential living rooms, bedrooms, hallways, and light commercial hospitality spaces, the Odina pairs with any standard GU10 LED bulb up to 10W (sold separately). Knightsbridge produces dimmable, non-dimmable, and SmartKnight controllable GU10 options across a range of colour temperatures, giving flexibility to choose the light output and control parameters that suit the installation. Dimmer compatibility depends on the specific GU10 bulb chosen.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium construction provides structural rigidity and heat dissipation for the GU10 lamp, while the matt black finish integrates cleanly into dark ceilings or provides contrast against white. The bezel sits 6mm proud of the ceiling surface once installed, creating a defined circular trim around the aperture. The IP20 rating limits the fitting to dry indoor use only — it is not rated for bathrooms, wet rooms, or outdoor installation. The fitting carries a 5-year warranty and is compatible with Knightsbridge fire hoods where ceiling fire rating compliance is required.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e25 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769549_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954278.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this downlight come with a GU10 bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The fitting accepts any standard GU10 LED bulb up to 10W but bulbs are sold separately. Knightsbridge produces a range of GU10 options including dimmable, non-dimmable, and SmartKnight controllable variants in different colour temperatures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating limits the Odina to dry indoor locations only. For bathroom installation, an IP65-rated downlight is required to meet UK wiring regulations for zones 1 and 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the 25° tilt allow?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lamp holder tilts up to 25° from vertical, allowing the beam to be angled toward a wall, artwork, or specific area rather than casting light straight down. This is useful for accent lighting or reducing glare in living rooms and bedrooms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 70mm void above the ceiling surface is required to accommodate the fitting and allow adequate airflow around the GU10 lamp for heat dissipation.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293643235595,"sku":"ODA1TRB","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/918998_46f22c40-d834-4004-a3b5-ef9586d8e79f.jpg?v=1714661680"},{"product_id":"odina-single-tilt-square-downlight-white-gu10","title":"Odina Single Tilt Square Downlight White - GU10","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Odina is a square recessed downlight with a tiltable GU10 lamp holder housed in a white die-cast aluminium bezel. The 82mm square faceplate sits 6mm proud of the ceiling once installed, with a 25-degree tilt range allowing the light to be angled towards artwork, architectural features, or specific areas of a room rather than casting purely vertical downlight.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential living rooms, bedrooms, hallways, and light commercial installations including hospitality and retail where directed accent lighting is needed, the Odina requires a 70mm ceiling void depth and a 72mm cut-out diameter. The lamp holder accepts any standard GU10 bulb up to 10W (sold separately), giving flexibility to choose colour temperature, beam angle, and dimmable or non-dimmable options including Knightsbridge's own SmartKnight range for wireless control.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium construction provides a rigid bezel that won't flex or distort once fitted into plasterboard or suspended ceilings. The white powder-coat finish integrates with white ceilings in contemporary, minimalist and Scandinavian interiors. The IP20 rating restricts use to dry indoor areas only — bathrooms and kitchens with steam zones require IP44 or IP65-rated alternatives. The fitting carries a 5-year warranty and is compatible with Knightsbridge fire hoods where fire rating compliance is required (consult the fire hood data sheet to confirm compatibility).\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e25 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769555_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954290.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Odina requires a minimum 70mm ceiling void above the plasterboard or suspended ceiling to accommodate the lamp holder and GU10 bulb. The 72mm cut-out diameter is drilled or cut into the ceiling surface before the fitting is clipped in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The fitting accepts any standard GU10 bulb up to 10W (sold separately). Most users pair this with a 5-7W LED GU10 in either 3000K warm white or 4000K neutral white depending on the room use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb you fit. The downlight itself has no electronics — it's a passive lamp holder. If you fit a dimmable GU10 LED and pair it with a compatible LED dimmer switch, the fitting will dim. Non-dimmable GU10s will not dim regardless of switch type.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating restricts use to dry indoor areas only. Bathrooms require IP44 (zones 2 and 3) or IP65 (zones 1 and 2). See the Knightsbridge IP-rated downlight range for bathroom alternatives.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293643268363,"sku":"ODA1TSW","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919012_c0b789ea-7506-4657-b20c-efdd2b71431e.jpg?v=1714661683"},{"product_id":"odina-single-tilt-square-downlight-gu10-black","title":"Odina Single Tilt Square Downlight GU10 - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Odina is an 82mm square tiltable downlight in black die-cast aluminium with a curved-edge bezel and a 25-degree tilt range. The fitting takes a standard GU10 bulb (sold separately) up to 10W and projects just 6mm from the ceiling once installed. The square bezel measures 82mm × 82mm and requires a 72mm circular cut-out in the ceiling with a minimum 70mm void depth above.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential ceilings, hallways, bathrooms (dry zones only — IP20 rated), and light commercial applications including hospitality and retail, the Odina's tilt mechanism allows the beam to be directed towards a feature wall, artwork, or specific zone rather than straight down. The die-cast aluminium construction dissipates heat effectively and the black powder-coated finish resists discolouration under prolonged use.\u003c\/p\u003e\n\u003cp\u003eThe fitting is Class I (requires an earth connection) and compatible with any GU10 LED, halogen or energy-saving bulb up to 10W. Dimmer compatibility depends on the bulb chosen — Knightsbridge's dimmable GU10 LEDs work with most leading-edge and trailing-edge dimmers, while non-dimmable bulbs should not be paired with dimmer circuits. The low 6mm projection makes the Odina suitable for low-ceiling spaces where deeper downlights would intrude into headroom.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e25 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769556_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954280.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Odina takes a standard GU10 bulb up to 10W. Bulbs are sold separately. Most users pair this with a GU10 LED bulb between 4-7W and 2700K-4000K depending on the room's purpose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimmer compatibility depends entirely on the GU10 bulb you fit. Knightsbridge's dimmable GU10 LEDs work with most leading-edge and trailing-edge dimmers, but you must use a bulb specifically rated as dimmable. Non-dimmable bulbs will flicker or fail on dimmer circuits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 70mm void depth is required above the ceiling line to accommodate the bulb holder and wiring. The bezel projects just 6mm below the ceiling once installed, making it suitable for low-ceiling spaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating means it can be used in dry zones of bathrooms (outside the zones around baths and showers). It is not rated for use directly above a bath or within a shower enclosure. For wet zones, consider Knightsbridge's IP65-rated downlights.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293643596043,"sku":"ODA1TSB","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919008_0e463784-fda7-45e1-b94e-fa47f8c720fb.jpg?v=1714661686"},{"product_id":"ambar-single-tilt-square-downlight-gu10-white","title":"Ambar Single Tilt Square Downlight GU10 - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Ambar is a single-head tilt downlight built around a 92mm square white aluminium bezel with a recessed adjustable GU10 lamp holder. The lamp holder tilts and rotates within the bezel, allowing the light to be aimed at different angles rather than straight down, giving control over where the beam falls in the room.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, commercial and hospitality installation where directional accent or task lighting is needed, the Ambar suits positions above kitchen worktops, retail display areas, artwork, reading corners and dining tables where light needs to be aimed at a specific surface rather than providing general ambient fill. The 82mm cut-out fits standard ceiling void depths from 70mm upwards, and the tool-free cable termination allows loop-in\/loop-out wiring on the second fix without screwdrivers.\u003c\/p\u003e\n\u003cp\u003eThe white powder-coated aluminium bezel sits 3mm proud of the ceiling surface with a 22mm recessed depth, giving a low-profile finish that works in rooms with standard or lower ceiling heights. The lamp holder accepts any GU10 bulb up to 10W (sold separately), including Knightsbridge's dimmable, non-dimmable and SmartKnight GU10 LED options across different colour temperatures. The IP20 rating restricts the fitting to dry indoor areas — not suitable for bathrooms or outdoor installation.\u003c\/p\u003e\n\u003cp\u003eThe square edge design pairs cleanly with contemporary interiors and architectural lighting schemes. The adjustable head drops down slightly from the bezel on installation, making lamp replacement straightforward without needing to remove the entire fitting. Knightsbridge packages the Ambar range in FSC-approved cardboard.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769562_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954086.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat GU10 bulb should I use with this downlight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting accepts any GU10 bulb up to 10W. Most installations use a GU10 LED between 4-7W and 3000K for warm white task lighting. Knightsbridge produces dimmable and non-dimmable GU10 options specifically for the Ambar range, available separately at Niori.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the lamp head be adjusted after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The GU10 lamp holder tilts and rotates within the square bezel, allowing the beam to be aimed at different angles. The adjustment remains in position once set, so the light can be redirected without accessing the ceiling void.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 70mm void depth is needed to accommodate the recessed body and wiring. The fitting requires an 82mm square cut-out in the ceiling surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for bathroom installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating restricts the Ambar to dry indoor areas only. For bathroom zones 1 and 2, an IP44-rated or higher downlight is required.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293643825419,"sku":"AMA1TSW","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919018_5c4fecfb-4c4c-43ff-982e-fe03d128c9eb.jpg?v=1714661690"},{"product_id":"ambar-single-tilt-square-downlight-brushed-chrome","title":"Ambar Single Tilt Square Downlight - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Ambar is a single-head tilt downlight with a square brushed chrome bezel and fully adjustable GU10 lamp holder. The head tilts and rotates within the recessed housing, allowing light to be aimed at specific features, wall art, or task surfaces rather than just straight down. The 92mm square bezel sits 3mm proud of the ceiling surface and requires an 82mm circular cut-out and 70mm minimum void depth above the ceiling.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installations where directional accent or task lighting is needed, the Ambar suits kitchens, hallways, retail display areas, and hospitality spaces. The tilt mechanism allows the GU10 bulb to be angled without needing multiple fixed downlights, making it useful for highlighting artwork, countertops, or architectural details. The drop-down lamp holder means the bulb can be changed without removing the bezel or disturbing the ceiling finish.\u003c\/p\u003e\n\u003cp\u003eThe aluminium construction carries a Class II double-insulated rating and IP20 protection, limiting use to dry indoor locations. The brushed chrome finish provides a cooler metallic tone than brass or gold and pairs with modern, industrial, and transitional interiors. The tool-free cable termination uses loop-in\/loop-out connectors that speed up installation when linking multiple downlights on the same circuit. The fitting accepts any GU10 bulb up to 10W (sold separately), with dimming capability dependent on the chosen bulb.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769566_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954084.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 70mm void depth above the ceiling is required to accommodate the recessed housing and wiring. The fitting itself recesses 22mm into the ceiling with the bezel sitting 3mm proud of the surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the lamp head be angled?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The GU10 lamp holder tilts and rotates within the housing, allowing the light to be directed at walls, features, or task surfaces rather than straight down. The tilt range is sufficient for accent lighting and feature highlighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb chosen. The fitting itself is compatible with dimmable GU10 bulbs, but non-dimmable GU10s will not dim regardless of the switch or dimmer used. Check the bulb specification before pairing with a dimmer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating limits the Ambar to dry indoor locations. For bathroom zones requiring IP44 or IP65 protection, use a dedicated bathroom-rated downlight from the Knightsbridge range.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293643890955,"sku":"AMA1TSBC","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919016_31e7243d-e3fd-4aaf-8029-7ca9c593cc4f.jpg?v=1714661694"},{"product_id":"ambar-twin-tilt-square-downlight-white","title":"Ambar Twin Tilt Square Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Ambar twin tilt is a rectangular recessed downlight with two independently adjustable GU10 lamp holders mounted in a white aluminium bezel. Each lamp head tilts and rotates within its circular aperture, allowing both light sources to be aimed at different points within a room or focused on the same target for higher intensity.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential kitchens, dining areas, hallways and commercial spaces where directional accent or task lighting is needed, the twin configuration suits applications like kitchen worktops where one head lights the prep surface and the other provides fill light, or retail displays where each lamp picks out a different product. The 175mm x 92mm rectangular footprint fits between joists in typical UK ceiling construction with a 70mm minimum void depth required above the plasterboard. The 165mm x 80mm cut-out and drop-down lamp holder design allows bulbs to be changed from below without removing the bezel.\u003c\/p\u003e\n\u003cp\u003eThe white powder-coated aluminium finish blends into white ceilings while the square-edge bezel design sits flush with the plaster surface, projecting just 3mm below the ceiling plane. The fitting is Class II double-insulated and carries an IP20 rating, making it suitable for dry indoor locations. The tool-free cable termination uses push-fit connectors with loop-in\/loop-out functionality, allowing multiple fittings to be daisy-chained during installation without stripping wire or using terminal screwdrivers. GU10 bulbs are sold separately, with dimmer compatibility dependent on the specific bulb chosen.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e175 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e165x80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e2x10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769567_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954104.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes two GU10 twist-lock bulbs, sold separately. Most users fit LED GU10s between 5-7W and 2700K-3000K for accent or task lighting. Maximum load is 10W per lamp holder.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much tilt and rotation do the heads have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach lamp head tilts and rotates within its circular aperture, giving approximately 30-40° of directional adjustment from vertical. This allows both heads to be aimed at different targets or converged on the same point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 70mm void above the ceiling is required to accommodate the drop-down lamp holders and wiring. The recessed depth of the fitting body is 22mm, with the bezel projecting 3mm below the ceiling surface once installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the fitting is not protected against moisture ingress. It is suitable for dry indoor locations only, not bathrooms, wet rooms or outdoor covered areas.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293644054795,"sku":"AMA2TSW","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919026_3cf15a33-241c-4998-87a8-f76c312cdb1c.jpg?v=1714661697"},{"product_id":"ambar-twin-tilt-square-downlight-brushed-chrome","title":"Ambar Twin Tilt Square Downlight - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Ambar Twin Tilt is a rectangular recessed downlight housing two independently adjustable GU10 lamp holders within a 175mm x 92mm brushed chrome aluminium frame. Each lamp head tilts and rotates within its aperture, allowing both beams to be aimed at different points within the same space rather than being locked to a fixed downward position.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential kitchens, dining areas, commercial retail spaces and hospitality interiors where directional accent lighting is needed, the twin configuration suits rectangular dining tables, kitchen islands, artwork displays and corridor runs. The adjustable heads mean both lamps can be angled towards a central table surface, or one aimed at a worktop edge while the other lights the centre, giving installation flexibility that fixed downlights cannot match. The 22mm recessed depth and 70mm minimum void requirement fit standard UK ceiling construction without needing extended voids.\u003c\/p\u003e\n\u003cp\u003eThe brushed chrome finish on the aluminium frame provides a cool metallic accent that pairs with modern, industrial and minimalist interiors. The square-edge design sits flush with the plasterboard or ceiling tile surface with only a 3mm projection once installed. The drop-down lamp holders mean bulbs can be changed from below without removing the fitting from the ceiling, and the tool-free cable termination allows loop-in\/loop-out wiring during second fix without screwdrivers. Each lamp holder accepts a GU10 bulb up to 10W (bulbs sold separately), giving a combined maximum load of 20W for the twin fitting.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e175 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e165x80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e2x10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769571_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954100.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ambar Twin Tilt accepts two GU10 bulbs up to 10W each (20W total maximum). Bulbs are sold separately. Most users pair this with warm-white LED GU10s between 5-7W and 2700K-3000K for general lighting, or 4000K for task lighting in kitchens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the lamp heads be adjusted after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Both lamp heads tilt and rotate independently within their apertures, allowing the light beams to be aimed at different points even after the fitting is installed. This is useful for adjusting lighting as furniture positions change.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 70mm void above the ceiling surface is required. The fitting itself has a 22mm recessed depth, with the remainder needed for lamp clearance and thermal ventilation around the bulbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means this fitting is not protected against moisture ingress and should only be installed in dry internal spaces. For bathrooms, Knightsbridge produces IP65-rated downlights in the same Ambar range.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293644153099,"sku":"AMA2TSBC","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919024_0cd301d9-f934-4700-9861-200e25e3a0a9.jpg?v=1714661700"},{"product_id":"ambar-3-light-tilt-square-recessed-downlight-white","title":"Ambar 3 Light Tilt Square Recessed Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Ambar is a 3-light recessed downlight with independently adjustable heads housed in a rectangular white aluminium plate measuring 260mm x 92mm. Each head accepts a GU10 bulb (sold separately) and tilts within its aperture to direct light across a table surface, onto a wall, or down for general room illumination. The recessed depth is 22mm with a 70mm minimum void required above the ceiling.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchens, dining areas, home offices and commercial hospitality spaces, the three adjustable heads allow light to be aimed where it's needed rather than fixed in one position. A corner dining table might use one head to light the table centre and two to wash adjacent walls; a kitchen island installation could direct all three heads downward for task lighting over a worktop. The white finish integrates with white ceilings and the square-edge plate sits flush once fitted.\u003c\/p\u003e\n\u003cp\u003eThe aluminium construction gives the fitting a lightweight 300-350g profile that fits standard UK ceiling voids. Knightsbridge's tool-free cable termination system speeds up installation — the wiring loop-in\/loop-out functionality allows multiple fittings to be daisy-chained without junction boxes. Each GU10 lampholder drops down from the head for bulb changes without removing the faceplate, and the Class II rating means no earth connection is required during fitting.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e245x80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e3x10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769577_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954106.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes three GU10 bulbs up to 10W each, sold separately. Knightsbridge offers dimmable and non-dimmable GU10 LED options in a range of colour temperatures. Choose a dimmable GU10 LED if pairing with a dimmer switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much ceiling void is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 70mm void above the ceiling is required to accommodate the fitting depth and GU10 bulb. The recessed depth of the fitting itself is 22mm, with the bulbs adding the remaining depth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan each head be aimed independently?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. All three heads tilt within their apertures independently of each other, allowing light to be directed across different zones — for example, one head down, two aimed outward to wash walls.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating means it's designed for dry indoor locations only. It's not rated for use in bathroom zones where moisture or direct water contact is present.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293644185867,"sku":"AMA3TSW","price":31.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919030_59470e91-9896-4405-abd4-4e16a6bc3a59.jpg?v=1714661702"},{"product_id":"ambar-3-light-tilt-square-downlight-brushed-chrome","title":"Ambar 3 Light Tilt Square Downlight - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Ambar is a 3-light recessed downlight with fully adjustable GU10 lamp holders set in a brushed chrome aluminium bezel measuring 260mm x 92mm. Each of the three heads tilts independently, allowing light to be directed at different points across a kitchen worktop, dining table or display surface without needing multiple ceiling apertures.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential kitchens, dining rooms, commercial hospitality and retail interiors where directed light is required, the Ambar sits almost flush with the ceiling (3mm projection) and requires a 70mm ceiling void and a 245mm x 80mm rectangular cut-out. The lamp holders drop down from the bezel for rapid bulb changes without removing the fixture, and the tool-free termination system uses an intuitive loop-in\/loop-out design for second-fix installation.\u003c\/p\u003e\n\u003cp\u003eThe brushed chrome finish is a brushed aluminium surface with a cool metallic tone that pairs with both contemporary and classical interiors. The square-edged bezel design gives a defined geometric profile against plasterwork. Each lamp holder accepts a standard GU10 bulb up to 10W (bulbs sold separately), with dimmer compatibility dependent on the bulb specification chosen. The IP20 rating restricts use to dry interior locations only.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e245x80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e3x10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769578_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954108.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ambar takes three GU10 bulbs up to 10W each, sold separately. Knightsbridge offers dimmable, non-dimmable and SmartKnight GU10 options in various colour temperatures. Most users pair this fitting with 5-7W warm white LEDs at 2700K-3000K.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 70mm ceiling void is required for the lamp holder assembly. The rectangular cut-out measures 245mm x 80mm. The bezel sits nearly flush with the ceiling surface, projecting only 3mm once installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the lamp heads be angled?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each of the three GU10 lamp holders tilts independently within its aluminium housing, allowing light to be aimed at different points across a worktop, table or display area without needing to angle the entire fixture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating restricts the Ambar to dry interior locations only. For bathrooms, zones 1 and 2 require IP44 or IP65 rated fittings. The Ambar is suitable for kitchens, dining rooms, hallways and living spaces.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293644251403,"sku":"AMA3TSBC","price":31.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919028_9fc652af-45a1-4632-8b01-b2c40c9e087a.jpg?v=1714661704"},{"product_id":"ambar-quad-tilt-square-downlight-white","title":"Ambar Quad Tilt Square Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Ambar Quad is a 175mm square recessed downlight housing four independently tiltable GU10 lamp holders in white powder-coated aluminium. Each lamp holder rotates and tilts within its aperture, allowing the four beams to be aimed at different points within a room rather than directing all four downward in parallel. This makes the fitting useful over dining tables, kitchen islands and reception desks where light needs to reach multiple surfaces or zones from a single ceiling cut-out.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and commercial installation, the Ambar Quad requires a 165mm square cut-out and a minimum 70mm void depth above the ceiling. The fitting projects just 3mm below the ceiling line once installed, keeping a low profile suitable for rooms with ceiling heights under 2.4m. The drop-down lamp holder design allows GU10 bulbs to be changed from below without needing to remove the fitting or access the void.\u003c\/p\u003e\n\u003cp\u003eThe aluminium construction is finished in white powder coat and rated IP20, restricting use to dry indoor environments. The fitting accepts four GU10 bulbs up to 10W each (sold separately), with dimming capability dependent on the bulb chosen. Knightsbridge supplies tool-free cable terminals inside the void for loop-in\/loop-out wiring, reducing second-fix installation time on multi-fitting runs. The 5-year warranty covers the fitting hardware but does not extend to separately purchased lamps.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e175 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e175 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e165x165 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e4x10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769583_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954114.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat void depth is required above the ceiling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 70mm void depth is required to accommodate the fitting body and wiring. The recessed depth of the fitting itself is 22mm, and the visible projection below the ceiling is just 3mm once installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan each lamp be aimed independently?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each of the four GU10 lamp holders tilts and rotates within its aperture, allowing the beams to be aimed at different points. This is useful over dining tables or kitchen islands where you want light on multiple surfaces rather than four parallel beams.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take and are they included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes four GU10 bulbs up to 10W each. Bulbs are sold separately. Dimming capability depends on the bulb you choose — pair with dimmable GU10 LEDs if you want dimmer control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bulbs be changed without removing the fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The drop-down lamp holder design allows GU10 bulbs to be twisted out and replaced from below the ceiling without needing to access the void or remove the fitting.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293644284171,"sku":"AMA4TSW","price":43.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919038_7374e87d-4c1c-4746-88c7-9fd4fca7d31e.jpg?v=1714661706"},{"product_id":"ambar-quad-tilt-square-downlight-brushed-chrome","title":"Ambar Quad Tilt Square Downlight - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Ambar quad tilt square downlight houses four independently adjustable GU10 lamp holders behind a 175mm square brushed chrome aluminium bezel. Each head tilts within its aperture, allowing light to be aimed at different points across a table, worktop or display area from a single ceiling position.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential dining rooms, kitchens, and commercial hospitality spaces, the quad configuration works where multiple light sources are needed from one fixture — a dining table where each head aims at a different place setting, or a kitchen island where heads are angled to eliminate shadows across the work surface. The 22mm recessed depth and 70mm minimum void requirement make it suitable for ceilings with limited plenum space. The square-edge brushed chrome bezel sits close to the ceiling plane with only 3mm projection, giving a flush architectural finish.\u003c\/p\u003e\n\u003cp\u003eThe aluminium construction carries Class II double-insulation and an IP20 rating for dry indoor use. Each of the four lamp holders accepts standard GU10 bulbs up to 10W (sold separately), with dimming capability dependent on bulb choice. The drop-down lamp holder design allows bulbs to be replaced without removing the bezel, and the tool-free cable termination with loop-in\/loop-out supports rapid installation in multi-fixture layouts.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e175 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e175 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e165x165 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e4x10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769585_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954112.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take and are they included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ambar quad takes four GU10 bulbs up to 10W each. Bulbs are sold separately. Most installations use LED GU10 bulbs between 5-7W, which provide equivalent light to 50W halogen while drawing far less power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the heads be angled independently?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each of the four lamp holders tilts independently within its aperture, allowing different aim points across a table or surface. This makes the quad useful for dining tables or kitchen islands where uniform coverage is needed from a single fixture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 70mm void above the ceiling is required to accommodate the lamp holders and wiring. The recessed depth of the fitting itself is 22mm, and the cut-out required is 165mm square.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulbs fitted. If you fit dimmable LED GU10 bulbs, the fixture will dim on a compatible LED dimmer. Non-dimmable bulbs will not dim regardless of the switch used.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293644382475,"sku":"AMA4TSBC","price":43.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919036_25252c0f-1e11-4299-8dcb-3b87e3b3f50d.jpg?v=1714661708"},{"product_id":"dipa-single-fixed-recessed-round-downlight-white","title":"Dipa Single Fixed Recessed Round Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Dipa is a single fixed recessed downlight with a white die-cast aluminium bezel and an anti-glare baffle design. The fitting accepts a single GU10 bulb (sold separately) and requires a 68mm ceiling cut-out with a minimum 130mm void depth above the ceiling line. The fixed lamp holder sits at the base of a recessed baffle that reduces direct glare from the bulb when viewed at typical room angles.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, commercial and hospitality ceilings where discrete task or accent lighting is needed, the Dipa suits kitchen prep areas, hallways, bathroom zones (IP20 rated), commercial retail display shelves, and office corridors. The white finish blends into white or light-coloured ceilings, while the minimal 3mm projection from the ceiling surface keeps the visual interruption low. The tool-free termination system allows loop-in\/loop-out wiring without needing to strip terminals, reducing second-fix installation time on multi-fitting runs.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium construction provides dimensional stability under operating temperature, and the Class II double-insulation removes the need for an earth connection to the fitting itself. The lamp holder drops down from the bezel for bulb changes without needing to remove the entire fitting from the ceiling. Dimmer compatibility depends on the GU10 bulb chosen — Knightsbridge's own dimmable and SmartKnight GU10 LED range pairs directly with this fitting and supports colour temperature selection and app control where required.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e78 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e68 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769769_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954222.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 130mm void depth above the ceiling surface is needed to accommodate the fitting body and allow for heat dissipation. The 68mm cut-out diameter is the hole diameter required in the ceiling material itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a GU10 bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. GU10 bulbs are sold separately. The fitting accepts any standard GU10 bulb up to 10W maximum. For dimmable operation, pair with a Knightsbridge dimmable GU10 LED and a compatible LED dimmer switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating means the fitting is suitable for bathroom zones outside the shower\/bath enclosure (Zone 0 and Zone 1 require IP65 minimum). It can be used in Zone 2 or outside the zones in a typical domestic bathroom.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the bulb changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lamp holder drops down from the bezel, allowing the GU10 bulb to be twisted out and replaced without removing the entire fitting from the ceiling. This saves time during routine maintenance on commercial installations with multiple fittings.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293644415243,"sku":"DIA1FRW","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1045942_ab4bfd8a-87f6-42b6-adef-0b040ebdbc53.jpg?v=1714661711"},{"product_id":"dipa-single-fixed-recessed-round-downlight-black","title":"Dipa Single Fixed Recessed Round Downlight - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Dipa is a single-lamp fixed recessed downlight with a 78mm diameter black die-cast aluminium bezel and a deep-set anti-glare baffle. The fitting takes a standard GU10 bulb (sold separately) rated up to 10W, and the lamp holder drops down from the body for tool-free bulb changes without disturbing the ceiling trim.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, commercial and hospitality spaces that need discrete low-glare accent or task lighting, the Dipa fits a 68mm ceiling cut-out and requires a minimum 130mm void above the ceiling. The fixed lamp position directs light straight down, making it suitable for general downlighting in hallways, kitchens, bathrooms (IP20 zones only), retail displays and hotel corridors. The tool-free cable termination with loop-in\/loop-out function speeds up installation when multiple fittings are being daisy-chained on a single circuit.\u003c\/p\u003e\n\u003cp\u003eThe black finish on the bezel and baffle gives a contemporary accent that recedes into dark ceilings or provides contrast against white plasterboard. The die-cast aluminium construction is Class II double-insulated, so no earth connection is required. The fitting is compatible with Knightsbridge's range of fire hoods for installations where ceiling fire rating must be maintained — check the specific fire hood model for cut-out and depth compatibility before ordering.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e78 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e68 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769772_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954220.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat GU10 bulb should I use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Dipa accepts any standard GU10 bulb up to 10W. Most installations use a warm white (2700K-3000K) LED GU10 between 5-7W for general lighting. Knightsbridge's own GU10 range includes dimmable, non-dimmable and SmartKnight controllable options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting carries an IP20 rating, which limits it to bathroom zones outside the splash areas (typically Zone 3, more than 600mm from a bath or shower). For zones closer to water sources, a higher IP-rated fitting is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 130mm void above the ceiling is required to accommodate the fitting body and lamp holder. The recessed depth of the fitting itself is 39mm, with only 3mm projection below the ceiling line once installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bulb accessible without removing the bezel?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The lamp holder drops down from the fitting body, allowing the GU10 bulb to be twisted out and replaced without disturbing the ceiling trim or needing to remove the entire fitting.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293644513547,"sku":"DIA1FRB","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1045946_de8d8b6b-0941-4253-8b53-47b5c14fd035.jpg?v=1714661713"},{"product_id":"dipa-single-fixed-recessed-square-downlight-white","title":"Dipa Single Fixed Recessed Square Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Dipa is a 78mm square recessed downlight with a fixed beam angle, designed around a die-cast aluminium housing in white finish. The fitting takes a single GU10 lamp (sold separately) and uses an anti-glare baffle to reduce direct view of the lamp face when approaching from the side or below, giving a softer ceiling appearance in residential and commercial spaces.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation in plasterboard ceilings with a minimum void depth of 130mm, the Dipa requires a 68x68mm square cut-out and sits almost flush with the ceiling once fitted, projecting just 3mm. The drop-down GU10 lamp holder allows the bulb to be changed from below without removing the fitting or accessing the void, making maintenance faster in kitchens, hallways, bathrooms (outside wet zones) and commercial corridors. Tool-free cable termination speeds up second-fix installation on multi-unit projects.\u003c\/p\u003e\n\u003cp\u003eThe white die-cast aluminium construction provides durability without visible corrosion or yellowing under heat from halogen or LED GU10 lamps up to 10W. The fitting carries IP20 rating, meaning it's suitable for dry interior areas but not bathrooms zones 1 or 2, and holds Class II double-insulation status so no earth connection is required. The fixed beam cannot be tilted, making it suitable for general ambient lighting rather than accent or task applications where adjustability is needed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e78 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e78 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e68x68 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769774_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954224.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Dipa needs a minimum void depth of 130mm above the plasterboard to accommodate the lamp holder and allow airflow around the fitting. The recessed depth of the fitting itself is 39mm, but the additional clearance prevents heat build-up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the fitting come with a GU10 bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. GU10 lamps are sold separately. The fitting accepts any standard GU10 bulb up to 10W, including LED, halogen, and dimmable variants. Most users choose an LED GU10 between 4-7W and 3000K-4000K for general ambient lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating means the Dipa is suitable for dry interior areas only. It cannot be installed in bathroom zones 1 or 2 (above baths, inside showers, or within 60cm of a basin or shower outlet). It can be used outside these zones where no direct water contact occurs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the lamp holder adjustable or tiltable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is the fixed-beam version of the Dipa, meaning the GU10 lamp points directly downward and cannot be angled. Knightsbridge produces a tilt version of the Dipa for accent lighting applications where beam direction needs adjustment.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293644546315,"sku":"DIA1FSW","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1045938_131bbe52-68d0-49b9-bcbd-a25b7b915774.jpg?v=1714661715"},{"product_id":"dipa-single-fixed-recessed-square-downlight-black","title":"Dipa Single Fixed Recessed Square Downlight - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Dipa is a 78mm square recessed downlight with a fixed GU10 lamp holder set in a black die-cast aluminium bezel. The deep-set lamp position and recessed black inner baffle reduce direct glare, directing light downwards while keeping the source hidden from normal sightlines. The fitting requires a minimum 130mm ceiling void depth and a 68 x 68mm cut-out.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential living rooms, hallways, commercial office spaces and hospitality interiors, the Dipa suits applications where ceiling lighting needs to remain visually discrete. The fixed orientation works in spaces where directed light is not required, such as evenly-spaced ceiling grids for ambient illumination. The black finish recedes into dark ceiling planes and suits industrial, contemporary and minimalist interiors.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium construction gives the fitting structural rigidity and heat dissipation for continuous-run GU10 LED bulbs up to 10W (sold separately). The Knightsbridge tool-free cable termination system allows loop-in and loop-out wiring without screwdrivers, speeding second-fix installation. The drop-down lamp holder permits bulb changes without removing the bezel from the ceiling. The fitting carries an IP20 rating (suitable for dry indoor locations) and a 5-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e78 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e78 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e68x68 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769775_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954226.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 130mm ceiling void is needed to accommodate the fitting body and lamp holder assembly. The recessed depth of the fitting itself is 39mm, with the remaining clearance allowing for wiring and heat dissipation around the GU10 bulb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The Dipa takes a standard GU10 bulb up to 10W (sold separately). Most users fit a GU10 LED between 5-7W at 3000K for warm white residential lighting or 4000K for commercial spaces. Dimmer compatibility depends on the specific GU10 bulb chosen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the lamp be changed without removing the bezel?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The drop-down lamp holder allows the GU10 bulb to be accessed and changed from below the ceiling without removing the bezel or breaking the ceiling seal. Push the lamp holder downwards, twist out the old bulb, insert the new one, and push the holder back into position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating limits the Dipa to dry indoor locations only. It is not suitable for bathroom zones requiring IP44 or higher protection. For bathroom downlights, see Knightsbridge's IP65-rated products in the Niori catalogue.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293644742923,"sku":"DIA1FSB","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1045940_eea08833-bfee-4722-8ac7-cbf72058c2f7.jpg?v=1714661718"},{"product_id":"dipa-single-tilt-recessed-round-downlight-white","title":"Dipa Single Tilt Recessed Round Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Dipa is a single tilt recessed downlight in white die-cast aluminium, designed for low-glare directional lighting in residential, commercial and hospitality interiors. The fitting requires an 82mm cut-out and a 130mm minimum ceiling void, with a 93mm white bezel sitting 3mm proud of the ceiling surface once installed. The lamp holder tilts 25 degrees from centre, allowing the beam to be angled towards walls, artwork or architectural features.\u003c\/p\u003e\n\u003cp\u003eDesigned for GU10 bulbs up to 10W (sold separately), the Dipa pairs with Knightsbridge's own GU10 LED range or any standard GU10 bulb. The lamp holder drops down from the fitting body on installation, giving quick access for bulb changes without removing the bezel or disturbing the ceiling finish. The tool-free cable termination uses spring-loaded push-fit connectors with loop-in\/loop-out capability, allowing multiple downlights to be daisy-chained during second fix without stripping cable or using terminal blocks.\u003c\/p\u003e\n\u003cp\u003eThe white powder-coated die-cast aluminium body provides IP20 ingress protection and carries Class II double-insulated construction, meaning no earth connection is required. The recessed lamp position and deep-set bezel create an anti-glare profile that keeps the light source visually shielded when viewed from typical standing and seated positions. The fitting is compatible with Knightsbridge's range of fire hoods where fire rating is required—check the specific fire hood technical data for size and rating compliance before specifying.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e93 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e25 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769778_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954232.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Dipa takes a standard GU10 bulb up to 10W maximum. Bulbs are sold separately. Most users pair this with a GU10 LED between 4-7W and 3000K-4000K depending on the room. Dimmable capability depends on the bulb—use a dimmable GU10 LED with a compatible dimmer switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 130mm void above the ceiling is required to accommodate the fitting body and lamp holder. The recessed depth of the fitting itself is 39mm, with the 93mm bezel projecting 3mm below the ceiling surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the lamp angle be adjusted after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The lamp holder tilts up to 25 degrees from centre, allowing the beam to be directed at walls, artwork or specific zones. The tilt is adjusted manually by angling the lamp holder within the bezel aperture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a fire hood required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFire hoods are only required where building regulations specify fire-rated ceilings. The Dipa is compatible with Knightsbridge fire hoods, but you must check the specific fire hood technical data to confirm size compatibility and the fire rating it provides when paired with this downlight.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293644808459,"sku":"DIB1TRW","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919828_70723c4b-d09b-4424-b28b-7e5285b50543.jpg?v=1714661720"},{"product_id":"dipa-single-tilt-recessed-round-downlight-black","title":"Dipa Single Tilt Recessed Round Downlight - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Dipa is a single-lamp tiltable recessed downlight built from die-cast aluminium with a matt black finish. The 93mm outer diameter requires an 82mm ceiling cut-out and a minimum 130mm ceiling void depth for installation. The inner lamp housing tilts up to 25 degrees from vertical, allowing the beam to be directed onto artwork, architectural features, or across a wall as wash light.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential living rooms, retail displays, and hospitality interiors where directed accent lighting is needed without visible fittings, the Dipa sits almost flush with the ceiling surface — just 3mm projection beyond the plasterwork. The recessed depth of 39mm accommodates the GU10 lamp holder, which drops down on installation for rapid lamp fitting and removal without tools. The black finish minimises visual presence on dark ceilings and provides a defined edge on white plaster.\u003c\/p\u003e\n\u003cp\u003eThe anti-glare design recesses the lamp deep within the housing, preventing direct view of the light source from most angles and reducing discomfort glare in living spaces and hospitality environments. The die-cast aluminium construction dissipates heat from the lamp efficiently, supporting GU10 LED bulbs up to 10W. Tool-free cable termination at the rear of the fitting allows loop-in\/loop-out wiring for multiple downlights on a single circuit, reducing second-fix installation time. The fitting carries IP20 rating for dry indoor use and is compatible with Knightsbridge fire-rated hoods where ceiling penetration requires fire barrier compliance.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e93 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e25 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769780_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954230.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 130mm ceiling void depth is needed to accommodate the 39mm recessed housing and allow clearance for the GU10 lamp and wiring connections. The 82mm cut-out is drilled through plasterboard or plaster before the fitting is pushed into place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat GU10 bulb should I use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting accepts any standard GU10 lamp up to 10W. GU10 LED bulbs are sold separately — most users choose 5-7W warm white LEDs at 2700K-3000K for residential accent lighting. Dimmer compatibility depends on the specific bulb model chosen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the tilt angle be adjusted after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Once installed, the inner lamp housing can be tilted up to 25 degrees from vertical to direct the beam onto walls, artwork, or architectural features. The tilt mechanism holds position without tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathroom use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating limits the Dipa to dry indoor locations only. For bathrooms, a downlight with IP44 or IP65 rating is required depending on zone placement.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293644873995,"sku":"DIB1TRB","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919824_459c1d88-be97-4f94-b815-77da01544147.jpg?v=1714661722"},{"product_id":"dipa-single-tilt-recessed-square-downlight-white","title":"Dipa Single Tilt Recessed Square Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Dipa is a single-lamp recessed square downlight with a 25-degree tilt range, built from die-cast aluminium with a white powder-coated finish. The 93x93mm square faceplate sits nearly flush to the ceiling with a 3mm projection, concealing an 80x80mm cut-out beneath. The lamp holder takes a standard GU10 bulb (sold separately) and tilts within a deep square recess designed to minimise glare and spill light.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential living rooms, bedrooms, hallways and hospitality interiors where directed accent lighting is needed without visible bulb glare, the Dipa suits ceiling voids of 130mm minimum depth. The tilt mechanism allows light to be aimed at wall art, architectural features or task surfaces without repositioning the entire fitting. The tool-free cable termination system and drop-down lamp holder make installation and lamp changes faster than traditional recessed downlights that require access from above.\u003c\/p\u003e\n\u003cp\u003eThe white finish integrates cleanly into white and light-coloured ceilings, while the deep square recess hides the GU10 bulb entirely when viewed from typical room angles, reducing glare in open-plan spaces and bedrooms. The die-cast aluminium construction provides structural rigidity for long-term ceiling mounting, and the Class II double-insulated design means no earth connection is required during installation. Dimmer compatibility depends on the GU10 bulb chosen — Knightsbridge produces dimmable, non-dimmable and smart-controlled GU10 options that pair with this fitting.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e93 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e93 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e80x80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e25 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769781_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954236.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 130mm void depth is needed to accommodate the 39mm recessed body and allow clearance for the GU10 lamp holder. Installations in shallower voids may not provide adequate ventilation or lamp access.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Dipa takes a standard GU10 bulb up to 10W maximum. Bulbs are sold separately. Knightsbridge produces dimmable, non-dimmable and smart-controlled GU10 options in various colour temperatures that pair with this fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the tilt angle be locked in position?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lamp holder tilts up to 25 degrees from vertical and holds position by friction. Once aimed, the lamp stays in position during normal use, but can be re-angled manually if needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating means the Dipa is not rated for bathroom zones where moisture protection is required. It suits dry indoor locations only — living rooms, bedrooms, hallways and commercial interiors without direct water exposure.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293645037835,"sku":"DIB1TSW","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919834_4ab4a280-92e1-446a-a7df-e7c63e6dec64.jpg?v=1714661724"},{"product_id":"dipa-single-tilt-recessed-square-downlight-black","title":"Dipa Single Tilt Recessed Square Downlight - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Dipa is a single-lamp recessed square downlight with a 25-degree tilt mechanism, housed in a die-cast aluminium black powder-coated frame measuring 93mm square. The tiltable lamp holder accepts a GU10 bulb (sold separately) and rotates within a deep recessed bezel that shields the bulb from direct view, reducing glare in residential, commercial and hospitality settings.\u003c\/p\u003e\n\u003cp\u003eDesigned for ceiling installation in living rooms, corridors, offices and hospitality spaces where directed accent lighting is needed without visible fittings, the Dipa requires a minimum void depth of 130mm above the ceiling surface and cuts into an 80mm x 80mm aperture. The tilt function allows the beam to be aimed at wall art, shelving, seating areas or architectural features rather than pointing straight down. The drop-down lamp holder clips out from below the ceiling, allowing bulb changes without removing the entire fitting or accessing the void.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium construction carries a Class II double-insulated rating and IP20 rating for dry indoor use. The black powder-coated finish provides a low-reflectance surface that recedes into dark ceilings or contrasts sharply against white plasterwork depending on the interior palette. The tool-free cable termination uses push-fit connectors with loop-in\/loop-out capability, speeding up installation when wiring multiple downlights on a single circuit. The fitting is compatible with Knightsbridge fire hoods where fire rating compliance is required (check specific hood compatibility with the fire hood technical data).\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e93 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e93 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e80x80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e25 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769785_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954234.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does the Dipa take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes a standard GU10 bulb up to 10W maximum. Bulbs are sold separately. Most users pair this with a Knightsbridge GU10 LED in 2700K-4000K depending on the room application. Dimming capability depends on the bulb chosen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 130mm void depth above the ceiling surface is needed to accommodate the fitting body and allow clearance for the tilting mechanism. The cut-out aperture is 80mm x 80mm square.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the tilt angle be adjusted after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The lamp holder tilts up to 25 degrees from vertical and can be repositioned by hand from below the ceiling once the bulb is fitted, allowing you to aim the beam at the desired feature or surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Dipa suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating limits the Dipa to dry indoor locations. It is not suitable for bathroom zones where moisture or direct water contact may occur. For wet or damp locations, see Knightsbridge IP65-rated downlight ranges.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293645168907,"sku":"DIB1TSB","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919832_2b61081f-c842-4e89-95cf-3382b7b2f298.jpg?v=1714661727"},{"product_id":"dipa-twin-tilt-recessed-downlight-white","title":"Dipa Twin Tilt Recessed Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Dipa is a twin-lamp recessed downlight with two independently tiltable GU10 lamp holders set into a white die-cast aluminium oval frame. Each lamp holder tilts up to 25° from vertical, allowing directional light to be aimed at specific features, surfaces or zones within the room rather than straight down. The oval cutout measures 173 x 82mm and requires a minimum ceiling void depth of 130mm.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, retail and hospitality spaces where task lighting or feature highlighting is needed without exposed fittings, the Dipa sits flush with the ceiling (3mm projection) and recesses 39mm above the plaster line. The twin-lamp configuration suits kitchen worktops, bathroom mirrors, retail display alcoves, or gallery walls where two directional beams from a single fitting give better coverage than a fixed central downlight. The white finish blends into white or light-coloured ceilings.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium construction provides rigidity and heat dissipation for higher-wattage GU10 lamps, with each lamp holder rated to 10W maximum (20W total per fitting). The IP20 rating limits use to dry indoor areas only. Knightsbridge's tool-free cable termination system allows loop-in\/loop-out wiring without a screwdriver, and the drop-down lamp holder design lets bulbs be changed from below without removing the fitting from the ceiling. GU10 bulbs are sold separately.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e185 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e93 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e173x82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e25 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e2x10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769788_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954240.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 130mm void above the ceiling is needed to accommodate the recessed body of the fitting. The 173 x 82mm oval cutout sits 39mm above the plaster line once installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan each lamp be aimed independently?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each of the two GU10 lamp holders tilts independently up to 25° from vertical, allowing one to light a worktop while the other highlights a wall feature or cabinet interior.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with GU10 bulbs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. GU10 bulbs are sold separately. Each lamp holder accepts any standard GU10 bulb up to 10W. Knightsbridge offers compatible dimmable, non-dimmable and SmartKnight GU10 options in various colour temperatures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating means the fitting is not protected against moisture ingress, so it is suitable only for dry indoor areas. For bathroom zones requiring IP44 or IP65 protection, a different downlight range is needed.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293645431051,"sku":"DIC2TRW","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919846_8b5845ba-0c25-4286-b9d2-0c2003bc7805.jpg?v=1714661729"},{"product_id":"dipa-twin-tilt-recessed-downlight-black","title":"Dipa Twin Tilt Recessed Downlight - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Dipa is a twin-bulb recessed downlight with tiltable lamp holders set within an elongated oval black aperture. Each of the two GU10 lamp holders tilts up to 25° independently, allowing directional accent lighting or wall-washing from a recessed fitting. The outer bezel measures 185mm long by 93mm wide and projects just 3mm from the ceiling surface once installed.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential living rooms, hallways, retail displays and hospitality spaces where directional lighting is needed without visible track or surface-mounted spots, the Dipa requires a 130mm minimum ceiling void depth and a 173mm x 82mm cutout. The drop-down lamp holder system allows GU10 bulbs to be installed and changed from below without removing the fitting from the ceiling, speeding maintenance in commercial settings. Tool-free cable termination and loop-in\/loop-out wiring support rapid installation across multiple fittings.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium construction carries an IP20 rating for dry interior use and a Class II double-insulated electrical classification, eliminating the need for an earth connection. The black powder-coated finish provides a low-glare recessed aperture that sits flush with dark ceilings or creates deliberate contrast on white plasterwork. Each lamp holder accepts standard GU10 bulbs up to 10W per position (20W combined maximum), with dimming capability dependent on the bulb chosen. Bulbs are sold separately.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e185 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e93 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e173x82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e25 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e2x10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769792_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954238.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take and are they included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Dipa takes two GU10 bulbs up to 10W each (20W combined maximum). Bulbs are sold separately. Most users fit warm-white LED GU10s between 4-7W and 2700K-3000K for accent or ambient applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 130mm ceiling void is required to accommodate the fitting body and wiring. The cutout dimensions are 173mm x 82mm, and the bezel projects just 3mm below the ceiling surface once installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the lamp holders be angled?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each of the two GU10 lamp holders tilts independently up to 25° from vertical, allowing the light to be directed onto wall surfaces, artwork, or specific zones within the room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming capability depends on the GU10 bulb fitted. The Dipa fitting itself is compatible with dimmable GU10 LED bulbs when paired with a suitable dimmer switch. Check the bulb specification before purchasing if dimming is required.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293645529355,"sku":"DIC2TRB","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919844_aa968fcb-7207-4e51-9e02-f677f955fe5f.jpg?v=1714661731"},{"product_id":"dipa-twin-tilt-recessed-square-downlight-white","title":"Dipa Twin Tilt Recessed Square Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Dipa is a twin-lamp recessed downlight with two independently tiltable GU10 fittings set within a rectangular white bezel. Each lamp holder tilts up to 25° from vertical, allowing the light to be directed towards specific zones in a room rather than straight down. The bezel measures 185mm x 93mm and sits flush with the ceiling surface, projecting just 3mm.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential kitchens, commercial retail spaces and hospitality environments where directed accent lighting is needed without visible fixtures, the Dipa requires a minimum void depth of 130mm above the ceiling and a 173mm x 82mm rectangular cut-out. The twin-lamp configuration provides higher output than single-lamp downlights while maintaining a compact footprint, making it suitable for task lighting over kitchen worktops, highlighting retail displays, or washing light across feature walls.\u003c\/p\u003e\n\u003cp\u003eThe fitting is die-cast from aluminium and finished in white powder coat. The lamp holders drop down from the rear of the bezel for fast bulb installation and maintenance without needing to remove the entire fitting. Knightsbridge's tool-free cable termination system and loop-in\/loop-out wiring design speed up second-fix installation, particularly on runs of multiple downlights. The fitting accepts any standard GU10 bulb up to 10W per socket (sold separately), including dimmable, non-dimmable and Knightsbridge SmartKnight options.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e185 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e93 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e173x82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e25 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e2x10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769793_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954242.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Dipa requires a minimum void depth of 130mm above the ceiling line. The fitting itself recesses 39mm into the ceiling with a 173mm x 82mm rectangular cut-out needed for installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting accepts two standard GU10 bulbs up to 10W each, sold separately. It works with dimmable, non-dimmable and Knightsbridge SmartKnight GU10 options. Dimmer compatibility depends on the specific bulb model chosen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan each lamp be tilted independently?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each of the two GU10 lamp holders tilts independently up to 25° from vertical, allowing you to direct light towards different areas or objects within the room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating means the Dipa is suitable only for dry interior locations. It cannot be used in bathroom zones 1 or 2 where water contact is possible. For bathrooms, look for downlights rated IP44 or higher.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293645594891,"sku":"DIC2TSW","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919852_3c905fb9-8990-4826-9f20-139e7ef9baa7.jpg?v=1714661733"},{"product_id":"dipa-twin-tilt-recessed-square-downlight-black","title":"Dipa Twin Tilt Recessed Square Downlight - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Dipa is a twin-lamp tilt recessed downlight with two independently adjustable GU10 lamp holders set within a rectangular black die-cast aluminium bezel. Each lamp holder tilts up to 25 degrees from centre, allowing directed light to be aimed at specific surfaces or objects rather than fixed downward. The fitting projects just 3mm from the ceiling once installed, with the black finish and recessed lamps creating a low-glare effect suited to residential, hospitality and commercial interiors.\u003c\/p\u003e\n\u003cp\u003eDesigned for ceiling installation in rooms with at least 130mm void depth above the plasterboard, the Dipa requires a rectangular cut-out of 173mm x 82mm and accepts two GU10 bulbs up to 10W each (bulbs sold separately). The fitting is rated IP20, making it suitable for general interior spaces including living rooms, hallways, kitchens and bedrooms, but not for bathrooms or wet rooms. The tool-free cable termination system and loop-in\/loop-out wiring capability speed up installation when running multiple downlights on a single circuit.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium construction provides structural rigidity and heat dissipation for LED and halogen GU10 lamps, while the Class II double-insulated design eliminates the need for earth connection during fitting. The black powder-coat finish on the bezel and internal baffle absorbs light that would otherwise reflect back through the aperture, reducing ceiling glare. Dimmer compatibility depends on the GU10 bulb chosen — pair with Knightsbridge dimmable GU10 LEDs for full control, or use non-dimmable GU10 LEDs on a standard switch circuit.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e185 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e93 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Box W\/H\/D\u003c\/td\u003e\n\u003ctd\u003e173x82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e25 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e2x10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769795_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954246.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 130mm void depth above the plasterboard is needed to accommodate the fitting body and lamp holders. The cut-out dimensions are 173mm x 82mm, and the fitting projects just 3mm below the ceiling line once installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan each lamp be angled independently?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each of the two GU10 lamp holders tilts independently up to 25 degrees from vertical, allowing light to be directed at different surfaces or objects within the room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes two GU10 bulbs up to 10W each (maximum 20W total load). Bulbs are sold separately. Knightsbridge offers compatible GU10 LEDs in dimmable and non-dimmable versions with a range of colour temperatures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the fitting is not protected against moisture ingress and should only be installed in dry interior spaces such as living rooms, bedrooms, hallways and kitchens.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293645660427,"sku":"DIC2TSB","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919850_8335a52b-80ae-4906-972e-38fec42d1658.jpg?v=1714661735"},{"product_id":"odan-single-tilt-round-trimless-plaster-downlight-white","title":"Odan Single Tilt Round Trimless Plaster Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Odan is a trimless plaster-in downlight with a tiltable GU10 lamp holder housed in a white die-cast aluminium surround. The 94mm diameter body sits flush with the plasterwork once installed, leaving only the lamp aperture visible for a minimal ceiling appearance. The lamp holder tilts within the housing, allowing the light to be directed onto walls, shelves, or feature areas rather than fixed straight down.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, commercial and hospitality ceilings with a minimum 90mm void depth, the Odan fits a 106mm ceiling cut-out and projects just 2mm below the finished plaster surface. The trimless design means plasterboard is cut to the edge of the surround and the skim coat continues over the lip, leaving no decorative bezel or visible metal ring. This gives a cleaner finish than conventional downlights where a chrome or white ring sits proud of the ceiling.\u003c\/p\u003e\n\u003cp\u003eThe GU10 lamp holder pulls out below the ceiling level for bulb changes without removing the entire fitting, and the tool-free cable termination accepts loop-in\/loop-out wiring for rapid second fix during installation. The fitting is rated Class II (double-insulated) and IP20, so it's suitable for dry interior ceilings but not bathrooms or wet areas. Maximum lamp wattage is 10W, which suits modern LED GU10 lamps across warm, neutral and cool colour temperatures.\u003c\/p\u003e\n\u003cp\u003eThe Odan is compatible with Knightsbridge's range of fire hoods where additional fire rating is required — check the specific fire hood technical data to confirm compatibility with the 106mm cut-out and 38mm recessed depth of this fitting. The raised lamp position within the housing reduces direct glare compared to flush-mounted GU10 fittings.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e94 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e38 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e106 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4775279_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does trimless mean in practice?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTrimless means the fitting has no decorative bezel or visible metal ring sitting proud of the ceiling. The plasterboard is cut to the edge of the downlight surround and the skim coat continues over the lip, leaving only the lamp aperture visible once the ceiling is finished.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 90mm void depth is required above the finished ceiling surface to accommodate the 38mm recessed depth of the fitting and allow clearance for the lamp holder and wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the lamp be changed without removing the fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The GU10 lamp holder pulls out below the ceiling level, allowing the bulb to be changed from below without disturbing the plasterwork or removing the entire fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means this fitting is suitable for dry interior ceilings only. Bathrooms and wet areas require IP44 or IP65-rated downlights depending on the zone.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293645857035,"sku":"OAA1TRW","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919868_ac338ac7-94d8-4ce7-86f7-c6f6441f2c8c.jpg?v=1714661745"},{"product_id":"oran-surface-tilt-round-downlight-white","title":"Oran Surface Tilt Round Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Oran is a 90mm diameter surface-mount downlight with a tiltable GU10 fitting housed inside a white aluminium cylinder. The lamp holder tilts through approximately 30° in any direction, allowing the light beam to be aimed at a wall, artwork, or specific task area rather than straight downward. The cylindrical body projects 115mm from the ceiling and the lamp sits recessed inside the cylinder, reducing direct glare.\u003c\/p\u003e\n\u003cp\u003eDesigned for spaces where recessed downlights cannot be installed due to shallow ceiling voids, solid concrete ceilings, or listed building constraints, the Oran mounts directly to the ceiling surface with rear cable entry through a central knockout. The two-piece construction screws together — a threaded base plate fixes to the ceiling, and the outer cylinder screws onto it — which simplifies initial installation and allows the outer body to be removed for relamping or redecorating without disturbing the wiring.\u003c\/p\u003e\n\u003cp\u003eThe white powder-coated aluminium finish pairs cleanly with white ceilings in residential, retail and hospitality interiors. The Class II double-insulated construction means no earth connection is required, and the IP20 rating suits dry indoor areas including living rooms, bedrooms, hallways, offices and retail spaces. The fitting accepts any standard GU10 bulb up to 10W (sold separately), giving control over colour temperature, beam angle and dimming depending on which GU10 you pair it with.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e115 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4775295_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954118.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Oran takes a standard GU10 bulb up to 10W maximum. Bulbs are sold separately. Most users pair this with a GU10 LED in warm white (2700K-3000K) with a beam angle between 36° and 60° depending on whether the light is for task focus or general ambient wash.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends entirely on the GU10 bulb you install. If you fit a dimmable GU10 LED, the fitting will dim when used with a compatible LED dimmer switch. Non-dimmable GU10 bulbs cannot be dimmed regardless of the switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating means the Oran is not suitable for bathroom zones 1, 2 or 3 where moisture or direct water contact occurs. It can be used in a bathroom only if positioned well away from the shower, bath and basin in a dry zone with no risk of water splash.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the beam direction adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe GU10 lamp holder inside the cylinder tilts on a ball joint, allowing you to angle the beam up to approximately 30° off-axis in any direction. Once the bulb is installed, tilt the fitting by hand to aim the light where needed, then the friction of the joint holds it in position.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293645922571,"sku":"ORA1TRW","price":27.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919896_3c10deb2-4df2-4eca-9926-e386d6db8b30.jpg?v=1714661747"},{"product_id":"oran-surface-mount-tilt-round-downlight-black","title":"Oran Surface Mount Tilt Round Downlight - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Oran is a 90mm diameter surface-mounted downlight in black aluminium with a tiltable GU10 lamp holder. The fitting mounts directly to the ceiling surface where recessed downlights cannot be installed due to shallow ceiling voids, solid concrete ceilings, or obstruction from joists and services. The lamp holder tilts within the housing, allowing the light beam to be directed at an angle rather than straight down.\u003c\/p\u003e\n\u003cp\u003eDesigned for ceilings where cutting recesses is impractical or undesirable, the Oran suits hallways, landings, concrete-slab apartments, listed buildings where ceiling cuts are restricted, and retrofit installations where existing recessed fittings have failed and the void depth no longer meets current regulations. The 115mm projection from the ceiling surface gives clearance for the GU10 lamp and tilt mechanism. Cable entry is through the rear of the base, concealing the wiring run against the ceiling.\u003c\/p\u003e\n\u003cp\u003eThe black aluminium body carries a textured powder-coat finish that reduces fingerprint visibility during installation and hides minor surface marks over time. The lamp holder sits within a recessed black baffle ring that reduces glare when viewed from the side. The Class II double-insulated construction means the fitting does not require an earth connection, simplifying installation on older wiring where earth may not be present at the ceiling position. The Oran accepts any GU10 lamp up to 10W, giving control over colour temperature, beam angle and dimming behaviour depending on the lamp chosen.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e115 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4775304_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954116.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Oran come with a GU10 bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. GU10 lamps are sold separately. The fitting accepts any GU10 lamp up to 10W. Most users choose a 5-7W LED GU10 in 3000K or 4000K depending on the room use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 lamp fitted. Pair the Oran with a dimmable GU10 lamp and a compatible dimmer switch to achieve dimming. Non-dimmable GU10 lamps will not dim and may flicker or fail if used with a dimmer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the light direction be adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The GU10 lamp holder tilts within the housing, allowing the beam to be angled rather than pointing straight down. The tilt range is approximately 30 degrees from vertical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNone. The Oran is a surface-mounted fitting designed for ceilings with no void or shallow voids where recessed downlights cannot be installed. The entire fitting sits below the ceiling surface with cable entry through the rear of the base.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293645955339,"sku":"ORA1TRB","price":27.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919894_1632d49a-7096-4c42-99f8-056dab5e34a7.jpg?v=1714661749"},{"product_id":"oran-surface-mount-tilt-square-downlight-white","title":"Oran Surface Mount Tilt Square Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Oran is a 90mm square surface-mount downlight with a tiltable GU10 lamp fitting housed in a white powder-coated aluminium body. The lamp sits recessed within the square housing and can be tilted to direct light at an angle from the ceiling plane, making the fitting suitable for accent lighting, picture lighting or directional task lighting in rooms where a fixed downward beam would not serve.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation on solid ceilings or where there is no void above the ceiling for a recessed fitting, the Oran mounts via rear cable entry and fixes directly to the ceiling surface. The 115mm projection from ceiling to base gives enough depth for the tiltable GU10 socket and its heat dissipation requirements. The raised lamp position within the housing reduces direct glare when viewed from typical standing or seated positions in a room.\u003c\/p\u003e\n\u003cp\u003eThe aluminium construction provides durability and effective heat management for GU10 lamps up to 10W. The white finish integrates cleanly with white or off-white ceilings in residential, retail and hospitality settings. The fitting accepts any standard GU10 lamp (sold separately), including LED, halogen, dimmable and Knightsbridge SmartKnight controllable options, giving flexibility over colour temperature, output and dimming behaviour depending on the lamp chosen.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e115 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4775306_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954122.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Oran include a GU10 bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The fitting accepts any standard GU10 lamp up to 10W, sold separately. Knightsbridge offers dimmable LED, non-dimmable LED and SmartKnight controllable GU10 options that pair with this fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the lamp be angled after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The GU10 socket tilts within the housing, allowing the light beam to be directed at an angle from the ceiling. This makes the Oran suitable for accent lighting or directing light onto specific surfaces rather than providing only a fixed downward beam.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling types is it suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Oran is designed for surface mounting on solid ceilings or where there is no ceiling void to accommodate a recessed fitting. It fixes directly to the ceiling surface via rear cable entry and projects 115mm downward from the ceiling plane.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 lamp installed. The fitting itself supports dimming if paired with a dimmable GU10 lamp and a compatible mains dimmer switch. Non-dimmable GU10 lamps will not dim regardless of the switch used.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293645988107,"sku":"ORA1TSW","price":27.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919902_567868cd-b1b1-40bc-8807-119fc24ba635.jpg?v=1714661751"},{"product_id":"oran-surface-mount-tilt-square-downlight-black","title":"Oran Surface Mount Tilt Square Downlight - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Oran is a surface-mounted square downlight with a tiltable GU10 fitting housed inside a 90mm x 90mm black aluminium body. The fitting projects 115mm from the ceiling and accepts any standard GU10 bulb up to 10W (sold separately), with the bulb positioned behind a recessed baffle that reduces direct glare from the lamp face.\u003c\/p\u003e\n\u003cp\u003eDesigned for locations where recessed ceiling fittings cannot be installed due to shallow voids, concrete ceilings, or steel-framed structures, the Oran mounts directly to the ceiling surface with rear cable entry. The GU10 lamp holder tilts inside the housing, allowing the beam to be angled towards walls, artwork, or workspaces rather than pointing straight down. This makes the fitting suitable for accent lighting in galleries, retail displays, home offices, and kitchens where task light needs to be directed onto specific surfaces.\u003c\/p\u003e\n\u003cp\u003eThe black powder-coated aluminium housing sits flush against the ceiling with a square profile that pairs cleanly with modern and industrial interiors. The two-piece construction uses a threaded top plate that screws onto the base unit, making lamp changes straightforward without removing the entire fitting from the ceiling. The IP20 rating confirms indoor dry-location use only. Dimming capability depends on the GU10 bulb fitted — Knightsbridge offers dimmable, non-dimmable and smart-control GU10 options separately.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e115 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4775308_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954120.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Oran takes a standard GU10 bulb up to 10W maximum. Bulbs are sold separately. Most users pair this with an LED GU10 between 4-7W, available in dimmable and non-dimmable versions from Knightsbridge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb fitted. If you use a dimmable GU10 LED, the fitting will dim when paired with a compatible trailing-edge or leading-edge dimmer. Non-dimmable GU10 bulbs will not dim.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere is this fitting suitable for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating confirms indoor dry-location use only. The fitting cannot be used in bathrooms (zones 1-2), outdoors, or in damp environments. It is suitable for living rooms, bedrooms, kitchens, hallways, home offices and retail spaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the light direction adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe GU10 lamp holder tilts inside the housing on a ball-joint mechanism, allowing the beam to be angled towards walls or surfaces. The adjustment is made by hand after the bulb is fitted, and the position holds under normal use without drifting.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293646020875,"sku":"ORA1TSB","price":27.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919900_e4ee53b5-5f6c-40a8-93e7-bddba2a36cf4.jpg?v=1714661753"},{"product_id":"spektroled-evo-4-cct-dimmable-fixed-fire-rated-led-downlight-white","title":"SpektroLED Evo 4-CCT Dimmable Fixed Fire Rated LED Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SpektroLED Evo is a fixed fire-rated LED downlight with selectable wattage (5W or 7W) and four selectable colour temperatures (2700K, 3000K, 4000K, 6000K). The switches controlling both wattage and CCT are located beneath the magnetic bezel, allowing adjustment after installation without removing the fitting from the ceiling. The integrated SMD LED delivers between 580 and 870 lumens depending on the wattage and CCT combination selected.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, kitchens, hallways and living rooms, the downlight carries an IP65 rating from below (IP20 from above), making it suitable for wet zones including Zone 1 in bathrooms. The 70mm cut-out fits standard UK ceiling joists with a 45mm minimum void depth. The fire rating covers 30\/60\/90-minute solid timber, 30-minute web joist and 30-minute i-joist installations, and the fitting is IC-rated for direct contact with thermal insulation. The male-female connector system allows cables to be terminated and hidden until decoration is complete, with the downlight plugged in only after painting.\u003c\/p\u003e\n\u003cp\u003eThe white housing shown is sold without a bezel — magnetic bezels are available separately in white, matt black, chrome, polished chrome, brass and antique brass finishes, allowing the same downlight to match different interior schemes. The pressed steel construction keeps the overall recessed depth to 43mm, making it one of the slimmest fire-rated downlights available for UK ceilings. The fitting is dimmable with trailing-edge dimmers and carries a 5-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e43 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e580\/600\/630\/620\/780\/810\/870\/840 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1020 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e144 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6167462_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan I change the colour temperature after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The CCT selector switch is located beneath the magnetic bezel. Once the downlight is installed, you can remove the bezel magnetically, adjust the switch to select between 2700K, 3000K, 4000K or 6000K, and replace the bezel without disturbing the ceiling mounting or wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for bathroom use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The downlight carries an IP65 rating from below, making it suitable for Zone 1 in bathrooms (directly above baths and showers). The IP rating from above is IP20, so the void space above the ceiling should remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bezel finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is sold without a bezel. Magnetic bezels are available separately in white, matt black, chrome, polished chrome, brass and antique brass. The bezel choice does not affect the light output or colour temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, with trailing-edge dimmers. Check compatibility with your specific dimmer model before installation — leading-edge dimmers may cause flickering or poor dimming performance with LED drivers.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723386123,"sku":"SPKEVF","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607266_7336a57d-cfe5-4482-92d4-6d6144c059fa.jpg?v=1714663257"},{"product_id":"knightsbridge-spektroled-evo-7w-dimmable-tilt-fire-rated-downlight-4-cct-white","title":"Knightsbridge SpektroLED Evo 7W Dimmable Tilt Fire Rated Downlight - 4-CCT White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SpektroLED Evo is a fire-rated recessed downlight with selectable wattage (5W or 7W), four colour temperatures (2700K, 3000K, 4000K, 6000K) and a 90-degree tilt mechanism. The fitting uses an integrated SMD LED array behind a prismatic diffuser, delivering between 565-865 lumens depending on wattage and CCT settings. The white pressed-steel bezel measures 90mm diameter and fits a 70mm cut-out with 56mm recessed depth.\u003c\/p\u003e\n\u003cp\u003eDesigned for new-build and retrofit ceiling installation, the SpektroLED Evo carries 30\/60\/90-minute fire ratings for solid timber joists, 30-minute ratings for web and I-joists, and IC rating for direct contact with loft insulation. The IP65 rating from below makes it suitable for bathroom zones 1 and 2, while the IP20 rating from above allows standard mains wiring in the ceiling void. The 90-degree tilt allows light to be directed onto walls, artworks or feature areas rather than straight down.\u003c\/p\u003e\n\u003cp\u003eThe fitting uses a male-female connector system that separates the downlight body from the mains cable, allowing first-fix wiring to be completed and terminated before decoration, with the luminaire body plugged in and clipped into the ceiling after painting. The same connector allows the fitting to be unplugged for lamp maintenance or redecorating without re-terminating cables. The dimmable driver works with trailing-edge dimmers and the 50,000-hour L70B10 rating suggests the LED will maintain 70% of initial output for approximately 11 years of continuous use.\u003c\/p\u003e\n\u003cp\u003eThe white finish pairs with standard white ceilings in residential, hospitality and commercial settings. Knightsbridge produces the SpektroLED Evo in six finishes (white, matt black, brushed chrome, polished chrome, brass, antique brass) sold as separate SKUs. The CCT and wattage are set via switches on the back of the fitting before installation, allowing a single stock item to cover multiple lighting scenarios.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6173131_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes it suitable for bathroom zones 1 and 2 (directly above a bath or shower enclosure). The IP20 rating from above requires standard ceiling void conditions with no water ingress from the loft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFour CCT settings (2700K, 3000K, 4000K, 6000K) are selected via switches on the back of the fitting before installation. Once the fitting is clipped into the ceiling the setting cannot be changed without removing the downlight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, but only trailing-edge dimmers. Leading-edge dimmers may cause flicker or fail to dim smoothly. Check dimmer compatibility with the manufacturer before installation, particularly when multiple downlights are controlled from a single dimmer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the tilt mechanism allow?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe inner lamp holder tilts up to 90 degrees within the bezel, allowing light to be directed onto walls, artwork or feature areas rather than straight down. The tilt is adjusted by hand after the fitting is installed.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723418891,"sku":"SPKEVTW","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607336_b6d3897e-f2e3-4137-8a39-5163df27e1d6.jpg?v=1714663259"},{"product_id":"spektroled-evo-ip65-tilt-fire-rated-led-downlight-matt-black-4-cct-dimmable","title":"SpektroLED Evo IP65 Tilt Fire Rated LED Downlight - Matt Black 4-CCT Dimmable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SpektroLED Evo is a fire-rated tilt downlight with selectable wattage (5W or 7W), four colour temperatures (2700K, 3000K, 4000K, 6000K) switchable on installation, and a 90-degree tilt mechanism housed in a matt black pressed steel bezel. The IP65 rating from below makes it suitable for bathrooms, shower rooms and wet-use zones as well as standard dry ceiling installations.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and light commercial use, the downlight fits a 70mm ceiling cut-out with a 56mm recessed depth. The male-female power connector system allows first-fix wiring to be terminated and concealed during decoration, with the luminaire itself plugged in and fitted after painting is complete. The same connector lets the fitting be removed for lamp replacement or maintenance without re-wiring. The tilt mechanism provides smooth 90-degree adjustment to direct light onto artwork, worktops, or specific zones within a room.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel construction carries fire ratings of 30\/60\/90 minutes on solid timber joists, 30 minutes on web joists, and 30 minutes on i-joists. The fitting is IC-rated for direct contact with ceiling insulation and carries acoustic rating ISO 10140-2:2010, making it suitable for multi-occupancy installations where sound transmission between floors must be controlled. The selectable wattage allows output to be reduced from 7W to 5W where lower light levels or tighter energy budgets are needed.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish provides a clean contrast against white or light-coloured ceilings and suits contemporary, industrial and minimalist interiors. The downlight is dimmable when paired with trailing-edge dimmers — compatibility should be checked before installation. The four colour temperatures cover warm residential lighting (2700K), hospitality and retail (3000K), office and task lighting (4000K), and clinical or high-contrast applications (6000K), all selectable from the same fitting.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174437_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this downlight dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the SpektroLED Evo is dimmable when paired with trailing-edge dimmers. Compatibility varies by dimmer model, so check with the dimmer manufacturer before installation to confirm it supports LED loads in the 5-7W range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature or wattage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSwitches on the rear of the fitting allow you to select between 2700K, 3000K, 4000K and 6000K colour temperatures, and between 5W and 7W output. These are set during installation and are not accessible once the downlight is fitted into the ceiling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 56mm void depth is needed above the ceiling. The cut-out diameter is 70mm and the visible bezel diameter once fitted is 90mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes it suitable for wet-use zones including directly above showers and baths. The IP rating from above is IP20, so it must be protected from direct water ingress in the ceiling void.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723451659,"sku":"SPKEVTMB","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607322_fd189a25-ac8e-4bb9-8d89-d1d7b8ac4b42.jpg?v=1714663261"},{"product_id":"spektroled-evo-7w-fire-rated-tilt-led-downlight-4-cct-polished-chrome","title":"SpektroLED Evo 7W Fire Rated Tilt LED Downlight 4-CCT - Polished Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SpektroLED Evo is a fire-rated recessed LED downlight with adjustable wattage (5W or 7W) and selectable colour temperature (2700K, 3000K, 4000K, 6000K) controlled by switches on the rear of the fitting. The polished chrome bezel tilts through 90 degrees to direct light onto walls, artwork or specific features within a room. The fitting is IP65 rated from the front and IP20 from above, allowing installation in bathrooms and wet-rated zones.\u003c\/p\u003e\n\u003cp\u003eDesigned for use in ceilings requiring fire certification, the SpektroLED Evo carries 30\/60\/90-minute fire ratings for solid timber joists, 30-minute ratings for web joists and I-joists, and meets acoustic rating ISO 10140-2:2010. The 70mm cut-out fits standard ceiling apertures and the 56mm recessed depth accommodates typical ceiling voids. The fitting is IC-rated for direct contact with loft insulation without overheating. First-fix and second-fix connectors allow the cable to be terminated and concealed during decoration, with the downlight plugged in afterwards.\u003c\/p\u003e\n\u003cp\u003eThe polished chrome finish provides a reflective metallic accent that pairs with both traditional and modern interiors. The pressed steel construction and prismatic diffuser distribute the SMD LED output evenly across a 60-degree beam angle. At 7W the fitting delivers between 745lm and 865lm depending on the CCT selected, giving sufficient task and general lighting for kitchens, bathrooms, hallways and living rooms with 2.4m ceiling heights. The fitting is dimmable with trailing-edge dimmers and carries a 5-year warranty.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174443_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature and wattage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo DIP switches on the rear of the fitting allow you to select between 5W and 7W output and between 2700K, 3000K, 4000K and 6000K colour temperatures. Adjust before installation or after disconnecting mains power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be installed in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from the front allows installation in bathroom zones 1 and 2 (within 2.25m of a bath or shower) provided the fitting is installed correctly with all cable entries sealed. The IP20 rating from above means the ceiling void itself must be dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the tilt mechanism smooth?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel tilts through 90 degrees on a friction joint that holds the selected angle without sagging or needing a locking screw. This allows precise aiming at walls, artwork or specific surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does this carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is rated for 30\/60\/90 minutes in solid timber joists, 30 minutes in web joists and I-joists. It also carries acoustic rating ISO 10140-2:2010 for installations requiring sound insulation between floors.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723517195,"sku":"SPKEVTPC","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607326_9c417de1-e27d-42d6-9270-1d2d23f2616b.jpg?v=1714663263"},{"product_id":"spektroled-evo-4-cct-tilt-fire-rated-led-downlight-brushed-brass-ip65","title":"SpektroLED Evo 4-CCT Tilt Fire-Rated LED Downlight - Brushed Brass IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SpektroLED Evo is a recessed LED downlight with a 90-degree tilt mechanism, selectable colour temperature between 2700K, 3000K, 4000K and 6000K, and selectable 5W or 7W output. The brushed brass bezel sits 90mm wide at the ceiling surface with a 70mm cut-out diameter, fitting into ceilings with a minimum 56mm void depth. The lamp technology is SMD LED with a prismatic diffuser, delivering between 565-865 lumens depending on the CCT and wattage selection.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential bathrooms, kitchens, hallways and living spaces, the downlight carries an IP65 rating from below (IP20 from above), making it suitable for Zone 2 bathroom installations and other wet or humid environments. The fire-rating covers 30\/60\/90-minute solid timber, 30-minute web joist and 30-minute i-joist installations, and the fitting is IC-rated for direct contact with ceiling insulation. The tilt mechanism allows the light beam to be angled up to 90 degrees from vertical, directing light onto walls, worktops or feature areas rather than straight down.\u003c\/p\u003e\n\u003cp\u003eThe fitting uses a male-female connector system that allows cables to be terminated and hidden during decoration, with the downlight body plugged in after the room is finished. This means the brushed brass bezel stays clean during plastering and painting, and the fitting can be unplugged for future maintenance or redecorating without re-wiring. The pressed steel construction and Class II double-insulated design mean no earth connection is required. Dimmable on trailing-edge dimmers (compatibility should be checked before installation).\u003c\/p\u003e\n\u003cp\u003eThe 4-CCT selector allows the installer or end user to choose between warm white (2700K), soft white (3000K), neutral white (4000K) and cool white (6000K) after installation, matching the downlight to the room's natural light or to other fittings in the property. The dual-wattage selector provides 5W for lower-output ambient lighting or 7W where brighter task lighting is needed. Complies with current energy efficiency standards and carries a 5-year manufacturer warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174449_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zone is this suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating from below makes the SpektroLED Evo suitable for Zone 2 bathroom installations (areas outside the shower enclosure or bath area but within 0.6m of them). The IP20 rating from above means the ceiling void must remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA selector switch on the rear of the fitting allows you to choose between 2700K, 3000K, 4000K and 6000K before installation. Once the downlight is fitted and powered, the selected CCT remains fixed until the fitting is removed and the switch changed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat dimmer is compatible?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight is dimmable on trailing-edge (electronic) dimmers. Leading-edge (resistive\/inductive) dimmers are not recommended. Knightsbridge publishes a compatibility list on their website — check before pairing with a specific dimmer model to avoid flicker or limited dimming range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SpektroLED Evo range includes white, matt black, brushed chrome, polished chrome, brushed brass and antique brass finishes. Search Niori for \"SpektroLED Evo\" to see the full range in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723549963,"sku":"SPKEVTB","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607312_7656a5e2-0714-4704-8a93-97494dd7bfbe.jpg?v=1714663266"},{"product_id":"spektroled-evo-7w-tilt-fire-rated-led-downlight-4-cct-brushed-chrome-ip65","title":"SpektroLED Evo 7W Tilt Fire Rated LED Downlight 4-CCT - Brushed Chrome IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SpektroLED Evo is a fire-rated tiltable LED downlight with selectable wattage (5W or 7W) and four selectable colour temperatures (2700K, 3000K, 4000K, 6000K), set on installation via switches on the driver. The brushed chrome bezel surrounds a prismatic diffuser that tilts smoothly through 90 degrees, allowing the beam to be directed towards a focal point or angled across a ceiling slope.\u003c\/p\u003e\n\u003cp\u003eDesigned for contractors and refurbishment projects where flexibility reduces stock complexity, the downlight uses a plug-in connector system that separates first-fix wiring from second-fix installation. The mains cable is terminated at first fix and left in the ceiling void; the downlight itself plugs in after decorating is complete. This same connector allows the fitting to be removed for maintenance or redecorating without re-wiring. The IP65 front rating makes the downlight suitable for bathroom zones 1 and 2, while the fire rating covers 30\/60\/90 minute solid timber installations and 30 minute web joist and i-joist constructions.\u003c\/p\u003e\n\u003cp\u003eThe fitting requires a 70mm cut-out and 56mm minimum void depth. The pressed steel construction and IC (insulation contact) rating mean the downlight can be installed in direct contact with loft insulation without overheating. The brushed chrome finish provides a neutral metallic accent that pairs with both warm and cool bathroom palettes, and the 90mm diameter bezel sits flush with the ceiling surface. Output ranges from 565lm at 5W\/2700K to 865lm at 7W\/4000K, giving flexibility to match the light level to the room size and ceiling height. The fitting is dimmable with trailing-edge dimmers and carries a 5-year warranty.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174453_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zones is this downlight suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 front rating makes the SpektroLED Evo suitable for bathroom zones 1 and 2 (directly above a bath or shower enclosure, and within 60cm of a bath or basin). The rear of the fitting is IP20, so ensure the ceiling void is dry and not exposed to water ingress.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature and wattage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall switches on the LED driver inside the fitting allow you to select between 2700K, 3000K, 4000K and 6000K, and between 5W and 7W output. These are set once during installation, not adjusted in use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the fitting be installed in contact with loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IC (insulation contact) rating means the downlight can be covered by or installed in direct contact with loft insulation without overheating. The fire rating covers 30\/60\/90 minute solid timber installations and 30 minute web joist constructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is dimmable with trailing-edge dimmers. Leading-edge dimmers may cause flicker or hum. Check compatibility with your specific dimmer model before installation.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723582731,"sku":"SPKEVTBC","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607314_36ab4de2-808c-41ba-846f-cec4daa35b5f.jpg?v=1714663268"},{"product_id":"spektroled-evo-7w-tilt-fire-rated-led-downlight-ip65-antique-brass","title":"SpektroLED Evo 7W Tilt Fire Rated LED Downlight IP65 - Antique Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SpektroLED Evo is a 90mm fire-rated downlight with 90-degree tilt adjustment, selectable wattage (5W or 7W), and four selectable colour temperatures (2700K, 3000K, 4000K, 6000K). The fitting runs on 230V mains with no external driver, using loop-in loop-out connectors that allow first-fix cable termination before decoration and second-fix plug-in installation after. The antique brass bezel frames a prismatic diffuser over an SMD LED module rated to 50,000 hours L70B10.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential bathrooms, kitchens, hallways and commercial installations where fire rating, IP65 front protection and adjustable light direction are required, the downlight fits a 70mm ceiling cut-out with 56mm recessed depth. The IP65 rating from below makes it suitable for bathroom zones 1 and 2, while the IP20 rating from above means it can be installed in contact with loft insulation (IC rated). Fire-rating covers 30\/60\/90-minute solid timber joists, 30-minute web joists and 30-minute I-joists (Staircraft), plus acoustic rating to ISO 10140-2:2010.\u003c\/p\u003e\n\u003cp\u003eThe tilt mechanism allows the beam to be angled up to 90 degrees from vertical, directing light onto walls, artwork, or work surfaces rather than straight down. The male-female connector system means the downlight can be unplugged for maintenance or redecorating without re-terminating cables. The antique brass finish provides a warm metallic accent that pairs with traditional and warm contemporary interiors, contrasting with the prismatic white diffuser when lit. The fitting is dimmable on trailing-edge dimmers (compatibility should be checked before installation).\u003c\/p\u003e\n\u003cp\u003eThe selectable wattage switch on the fitting allows output to be set to 5W (565-605 lumens depending on CCT) or 7W (745-865 lumens), giving flexibility to match light levels to room size and ceiling height without changing the fitting. The four CCT options cover warm white (2700K), soft white (3000K), neutral white (4000K) and cool white (6000K), selected via switches on the fitting before installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174457_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zones is this downlight suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating from below makes the SpektroLED Evo suitable for bathroom zones 1 and 2 (directly above a bath or shower). The IP20 rating from above means it should not be installed where water can enter from the ceiling void.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I select the wattage and colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting has switches accessible before installation that allow you to choose between 5W and 7W output, and between 2700K, 3000K, 4000K and 6000K colour temperatures. Once the fitting is installed in the ceiling, these settings cannot be changed without removing the downlight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the downlight be installed in contact with loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The fitting is IC rated (insulation contact), meaning it can be covered by loft insulation without overheating. The fire-rating also covers installation in solid timber joists, web joists and I-joists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the antique brass bezel removable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel is fixed and cannot be changed. Other finishes in the SpektroLED Evo range include white, matt black, brushed chrome, polished chrome and brass — use the search function to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723648267,"sku":"SPKEVTAB","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607306_d6a18823-ff87-47f1-aa90-698975f0523b.jpg?v=1714663270"},{"product_id":"spektroled-evo-dimmable-fire-rated-led-downlight-4-cct-fixed-10-pack","title":"SpektroLED Evo Dimmable Fire Rated LED Downlight 4-CCT Fixed (10 Pack)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SpektroLED Evo is a fire-rated LED downlight with selectable wattage (5W or 7W) and four selectable colour temperatures (2700K, 3000K, 4000K, 6000K) controlled by switches under the magnetic bezel. Each fitting houses an integrated SMD LED behind a prismatic diffuser and sits flush in a 70mm ceiling cut-out with a 90mm finished diameter. The pack contains 10 fittings, each supplied with a white bezel. Additional bezel colours are available separately, allowing finish changes without rewiring.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installation where fire rating, IP65 front protection and dimming capability are required, the SpektroLED Evo carries 30\/60\/90-minute fire ratings for solid timber joists, 30-minute ratings for web joists and i-joists, and IC rating for direct contact with loft insulation. The IP65 rating from below makes it suitable for bathrooms, wet rooms and kitchens, while the IP20 rating from above limits it to dry ceiling voids. The fitting connects directly to 230V mains using Knightsbridge's male-female connector system, which allows first-fix cabling to be terminated and hidden until decoration is complete, then plugged into the downlight at second fix.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel housing requires a 43mm minimum void depth and sits 43mm into the ceiling void once installed. The 60-degree beam angle provides general ambient light rather than narrow spotlighting. Switching between 5W and 7W allows the installer to reduce maximum light output where lower illumination is needed or increase it where brighter task lighting is required. Output ranges from 580 lumens at 5W\/2700K to 870 lumens at 7W\/4000K. The fitting is dimmable with trailing-edge dimmers (compatibility should be confirmed before installation). The L70B10 rating of 50,000 hours indicates the LED will maintain 70% of its initial output for approximately 22 years at 6 hours daily use.\u003c\/p\u003e\n\u003cp\u003eThe magnetic bezel clips onto the downlight body after installation, allowing it to be removed for access to the wattage and CCT switches without disturbing the ceiling mounting or wiring. The Class II rating means no earth connection is required. The fitting carries a 5-year warranty and complies with post-2021 energy efficiency standards (Energy Rating Class C). Acoustic rating to ISO 10140-2:2010 limits sound transmission through the ceiling void.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e43 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e43 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e580\/600\/630\/620\/780\/810\/870\/840 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1020 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e144 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174740_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes it suitable for bathroom zones 1 and 2 (outside the shower enclosure but within 60cm of a bath or shower tray). The IP20 rating from above means the ceiling void must remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature changed after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe magnetic bezel clips off without tools, exposing two switches underneath. One switch selects wattage (5W or 7W), the other cycles through the four colour temperatures (2700K, 3000K, 4000K, 6000K). The bezel clips back on after adjustment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 43mm void depth is required. The fitting sits 43mm into the ceiling void and requires a 70mm diameter cut-out. Existing downlight apertures of 60-75mm can usually accommodate the SpektroLED Evo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel colour be changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Knightsbridge offers the SpektroLED Evo bezel in six finishes (sold separately). The magnetic bezel system allows the finish to be changed without rewiring or removing the downlight from the ceiling.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293724303627,"sku":"SPKEVFS10","price":118.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607290_5c29eaa6-bb38-405c-baa0-ff5a97efae5d.jpg?v=1714663286"},{"product_id":"knightsbridge-seren-led-recessed-downlight-7-12w-tri-wattage-cct-white","title":"Knightsbridge Seren LED Recessed Downlight 7-12W Tri-Wattage CCT - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Seren is a recessed LED downlight with three selectable wattage outputs (7W, 10W, 12W) and three colour temperature settings (3000K warm white, 4000K neutral white, 5000K cool white), adjusted via switches on the driver before installation. The integrated SMD LED array sits behind an opal polycarbonate diffuser with a 100° beam angle, delivering between 950-1,575 lumens depending on the wattage and CCT combination chosen.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial spaces including retail, offices, hospitality and educational buildings, the Seren fits a 125mm ceiling cut-out and requires a minimum 100mm void depth above the ceiling plane. The die-cast aluminium body with white powder-coated finish includes spring retention clips for secure fixing into plasterboard or suspended ceilings. The IP40 rating (IP20 from above) allows use in dry internal environments but not in zones requiring moisture protection. Plug-and-play connectors simplify the mains wiring connection during installation.\u003c\/p\u003e\n\u003cp\u003eThe tri-wattage and tri-CCT adjustability allows a single SKU to cover multiple lighting scenarios without stocking different product variants. Lower wattages suit corridors and stairwells where ambient light is sufficient; higher wattages provide task lighting in workspaces. The 3000K setting gives a warmer residential feel in hospitality areas, 4000K suits general commercial use, and 5000K provides crisp illumination for technical or healthcare environments. The fitting carries a 5-year warranty and is rated for 50,000 hours L70B50 lifespan. An optional emergency kit (EMKIT2, sold separately) can be retrofitted for compliance with fire safety regulations.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e143 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e69.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e125 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP40 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/5000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e950\/995\/1000\/1290\/1360\/1350\/1490\/1575\/1575 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1810 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e41189\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e152.57 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6284327_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1820980.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow are the wattage and colour temperature adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth settings are controlled by DIP switches on the driver unit before installation. Once the downlight is fitted into the ceiling, the settings cannot be changed without removing the fitting and accessing the driver. Set your preferred wattage and CCT during installation based on the room's lighting requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Seren requires a minimum 100mm void depth above the ceiling and a 125mm diameter hole cut into the ceiling surface. The recessed depth of the fitting itself is 69.5mm, with the remaining space allowing clearance for the driver and cable connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the downlight dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The Seren is non-dimmable and designed for full-output on\/off switching. Attempting to dim the fitting may damage the driver or cause flickering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP40 rating (IP20 from above) means the Seren is suitable for dry internal spaces only. It does not meet the IP rating requirements for bathroom zones or any location where moisture ingress is a concern. For bathrooms, choose a downlight with IP65 or IP44 rating depending on zone placement.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293724795147,"sku":"SER712","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1672946_8949846b-34fb-47b8-be28-e4c8056cd1b9.jpg?v=1714663310"},{"product_id":"seren-led-recessed-downlight-tri-wattage-cct-adjustable-15-20-25w-white","title":"Seren LED Recessed Downlight Tri-Wattage CCT Adjustable 15\/20\/25W - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Seren is a 192mm recessed LED downlight with three switchable power outputs (15W, 20W, 25W) and three selectable colour temperatures (3000K warm white, 4000K neutral white, 5000K cool white). Both wattage and CCT are adjusted via switches on the rear of the fitting before installation, allowing a single stock item to serve multiple applications without ordering separate variants.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial offices, retail spaces, hospitality and educational installations where lighting needs vary by zone or may change over time, the Seren eliminates the need to specify exact wattage and colour temperature during procurement. A reception area can be set to 15W 3000K for a warmer tone, while a back-office or stockroom area can be set to 25W 5000K for maximum brightness and clarity. The 110-degree beam angle provides even coverage across desks, aisles and open-plan areas.\u003c\/p\u003e\n\u003cp\u003eThe fitting is built around a die-cast aluminium heat sink with a white powder-coated finish and an opal polycarbonate diffuser that softens the LED output and reduces glare. The 170mm cut-out requires a minimum 100mm void depth for the heat sink and terminal block to recess fully. Spring clips secure the downlight into plasterboard or suspended tile ceilings, and plug-and-play connectors simplify wiring on multi-unit installations. The IP40 rating (IP20 from above) allows installation in dry internal environments, and the fitting carries Class II double-insulated construction requiring no earth connection.\u003c\/p\u003e\n\u003cp\u003eThe Seren achieves up to 168 lumens per watt depending on the selected wattage and CCT combination, with a rated L70B50 lifespan of 50,000 hours. An optional emergency conversion kit (EMKIT2) is compatible for premises requiring maintained or non-maintained emergency lighting. The fitting carries a 5-year manufacturer warranty and is backed by Knightsbridge's commercial lighting service network.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e192 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e69.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e170 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP40 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/5000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1675\/1750\/1770\/2180\/2325\/2335\/3085\/3305\/3290 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e4060 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e15 \/ 20 \/ 25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e168.56 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6284474_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1815754.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the wattage and colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe wattage and CCT are adjusted via DIP switches on the rear of the fitting before installation. Once the downlight is installed and powered, the settings cannot be changed without removing the fitting from the ceiling. Consult the product manual (linked above) for the exact switch positions for each combination.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 100mm void depth is required to accommodate the heat sink and terminal block. The recessed depth of the fitting itself is 69.5mm, but the void needs the additional clearance for heat dissipation and safe electrical connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Seren dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The integrated LED driver does not support dimming. If dimming is required, consider a different Knightsbridge model with a DALI or phase-cut dimmable driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used with an emergency conversion kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Seren is compatible with Knightsbridge's EMKIT2 emergency conversion kit, which provides maintained or non-maintained emergency lighting for commercial premises. The emergency kit is sold separately.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293724827915,"sku":"SER1525","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1672862_64e476a7-b246-4e54-bdb2-e902dc456b8d.jpg?v=1714663312"},{"product_id":"seren-7-12w-dimmable-recessed-downlight-tri-wattage-cct-adjustable-white","title":"Seren 7-12W Dimmable Recessed Downlight - Tri-Wattage \u0026 CCT Adjustable White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Seren is a 125mm recessed downlight with switchable wattage (7W, 10W or 12W) and colour temperature (3000K warm white, 4000K neutral white or 5000K cool white) set via switches on the driver before installation. The integrated SMD LED delivers between 950-1575 lumens depending on the chosen wattage and CCT combination, providing output flexibility across commercial retail, office and hospitality installations where lighting needs may change between zones or over time.\u003c\/p\u003e\n\u003cp\u003eDesigned for ceiling voids of 100mm minimum depth, the downlight requires a 125mm diameter cut-out and sits 69.5mm above the ceiling plane once recessed. The die-cast aluminium housing carries an IP40 rating (IP20 from above), making it suitable for general interior use in dry environments. The opal polycarbonate diffuser provides glare-controlled, even light distribution across a 100-degree beam angle. Plug-and-play connectors speed up installation, and the fitting is compatible with Knightsbridge's EMKIT2 emergency conversion kit for maintained or non-maintained emergency operation.\u003c\/p\u003e\n\u003cp\u003eThe white powder-coated finish blends into most ceiling planes without drawing attention to the fitting itself. 0-10V dimming compatibility allows integration with commercial lighting control systems, though specific dimmer compatibility should be verified before pairing. The driver carries Class II double-insulated construction, removing the need for an earth connection. L70B50 rated to 50,000 hours, the LED is expected to retain 70% of initial output after approximately 17 years of continuous use at 8 hours per day.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e143 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e69.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e125 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP40 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/5000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e950\/995\/1000\/1290\/1360\/1350\/1490\/1575\/1575 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1810 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e41189\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e152.57 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6284480_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1820982.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the wattage and colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth settings are adjusted via switches on the driver unit before installation. Once the downlight is fitted and the ceiling closed, the settings cannot be changed without removing the fitting. Choose your preferred wattage (7W, 10W or 12W) and CCT (3000K, 4000K or 5000K) during installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 100mm void above the ceiling surface is needed to accommodate the 69.5mm recessed depth of the fitting plus clearance for the driver and heat dissipation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Seren compatible with dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Seren supports 0-10V dimming protocol, which is a commercial standard used with compatible control systems. It is not compatible with standard domestic trailing-edge or leading-edge dimmers. Verify compatibility with your specific 0-10V dimmer or control system before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP40 rating means the fitting is protected against solid objects larger than 1mm but has no water ingress protection. It is suitable for general interior spaces but not for bathroom zones requiring IP44 or higher ratings.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293724958987,"sku":"SER712AD","price":29.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1672968_089646fa-59d3-444b-8cc7-5bb4b6e1c2b7.jpg?v=1714663316"},{"product_id":"seren-dimmable-led-recessed-downlight-15-20-25w-switchable-cct-white","title":"Seren Dimmable LED Recessed Downlight 15\/20\/25W Switchable CCT - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Seren is a recessed LED downlight with three switchable wattage settings (15W, 20W, 25W) and three selectable colour temperatures (3000K warm white, 4000K neutral white, 5000K cool white). A DIP switch on the rear of the driver allows the installer to select the required output and colour temperature before ceiling installation, making it possible to standardise on a single product across different zones within the same project.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial applications including offices, retail spaces, hotels and education facilities, the Seren fits a 170mm ceiling cut-out and requires a minimum 100mm ceiling void to accommodate the 69.5mm recessed depth and driver assembly. The fitting uses a die-cast aluminium heat sink with white powder-coated finish and an opal polycarbonate diffuser that produces a 110-degree beam angle, suitable for general area lighting rather than accent or task work. The Class II double-insulated construction means no earth connection is required during installation.\u003c\/p\u003e\n\u003cp\u003eThe 0-10V dimming protocol allows the Seren to integrate with most commercial lighting control systems, though compatibility should be confirmed with the specific dimmer model before installation. Plug-and-play connectors on the driver simplify first-fix wiring and allow the fitting to be removed for ceiling maintenance without needing to re-wire. The fitting carries an IP40 rating from below (IP20 from above), making it suitable for dry interior environments but not bathrooms or wet areas. Knightsbridge rates the LED module at 50,000 hours L70B50 lifespan and backs the fitting with a five-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e192 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e69.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e170 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP40 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/5000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1675\/1750\/1770\/2180\/2325\/2335\/3085\/3305\/3290 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e4060 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e15 \/ 20 \/ 25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e168.56 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6284481_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1815758.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the wattage and colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe wattage (15W\/20W\/25W) and CCT (3000K\/4000K\/5000K) are selected using DIP switches on the driver before the fitting is installed in the ceiling. Once the ceiling is closed up, these settings cannot be changed without removing the fitting to access the driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 100mm ceiling void is required to accommodate the 69.5mm recessed depth of the fitting plus the driver assembly and wiring connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Seren suitable for bathroom installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP40 rating (IP20 from above) makes the Seren suitable for dry interior commercial spaces only. It does not meet the IP rating requirements for bathroom zones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat dimming protocol does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Seren uses 0-10V dimming protocol. Check compatibility with your specific dimmer or lighting control system before installation, as not all 0-10V dimmers behave identically at low dim levels.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293725122827,"sku":"SER1525AD","price":35.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1672878_d26dc5f7-f7da-4de2-aafd-3c0f57fb8095.jpg?v=1714663318"},{"product_id":"sara-led-recessed-tri-wattage-cct-scoop-downlight-15-20-25w","title":"SARA LED Recessed Tri-Wattage CCT Scoop Downlight - 15\/20\/25W","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SARA is a recessed LED downlight with switchable wattage (15W, 20W or 25W) and switchable colour temperature (3000K, 4000K or 5000K), built into a die-cast aluminium housing with a white powder-coated finish. The COB LED module sits behind a clear glass front, and the entire assembly rotates 350 degrees with a 40-degree tilt angle, allowing the beam to be directed towards walls, displays or specific work zones.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial installations requiring flexible task or accent lighting — retail, hospitality, offices, galleries — the SARA fits a 140mm ceiling cut-out and requires a minimum 160mm void above the ceiling. Both wattage and CCT are selected using switches on the driver housing before installation, so one SKU can be adapted to different zones in the same project without stocking multiple variants. The plug-and-play connectors simplify wiring and allow the fitting to be disconnected for ceiling access or relamping.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium body dissipates heat efficiently, contributing to the 50,000-hour L70B50 rating and supporting the 5-year warranty. The fitting is Class II (double-insulated, no earth required) and rated IP20 for indoor dry locations. It is not dimmable. An optional emergency conversion kit (EMKIT2) is available separately for installations requiring maintained or non-maintained emergency lighting compliance.\u003c\/p\u003e\n\u003cp\u003eThe lumen output ranges from 1,440 lm at 15W\/3000K up to 2,605 lm at 25W\/5000K, giving a system efficacy of up to 140 lm\/W depending on the selected combination. The 45-degree beam angle suits general downlighting and gentle accent applications rather than narrow spotlighting. CRI is rated above 80, which is acceptable for most commercial interiors where colour rendering matters but is not critical.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e157 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e40 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eCoB LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/5000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1440\/1565\/1605\/1900\/2080\/2125\/2335\/2580\/2605 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e3325 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e15 \/ 20 \/ 25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e140.08 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6310682_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1815968.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the wattage or colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth settings are controlled by switches on the driver housing, accessible before the fitting is installed. Once the ceiling is closed, changing these settings requires removing the fitting from the ceiling to access the driver. The wattage can be set to 15W, 20W or 25W, and the CCT to 3000K (warm white), 4000K (neutral white) or 5000K (cool white).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 160mm void above the ceiling is required to accommodate the 110mm fitting depth plus clearance for the driver and heat dissipation. The cut-out diameter is 140mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the SARA dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The constant-current driver does not support dimming. If dimming is required, consider a different downlight model with a compatible driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms or outdoor covered areas?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating limits the SARA to indoor dry locations only. It is not suitable for bathrooms (which require IP44 or higher in zones 1-2) or any outdoor application, even under cover.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293725417739,"sku":"SA1525C","price":37.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1670202_1930e7ed-56bf-4a63-9a71-b32069bbad73.jpg?v=1714663340"},{"product_id":"sara-led-recessed-tri-wattage-cct-dimmable-scoop-downlight-15-20-25w","title":"SARA LED Recessed Tri-Wattage CCT Dimmable Scoop Downlight - 15\/20\/25W","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SARA is a recessed LED downlight with three switchable wattage outputs (15W, 20W, 25W) and three switchable colour temperatures (3000K warm white, 4000K neutral white, 5000K cool white), all adjustable via DIP switches on the driver. The head rotates 350 degrees and tilts 40 degrees from vertical, allowing light to be directed onto vertical surfaces, feature walls or angled ceilings in commercial and residential installations.\u003c\/p\u003e\n\u003cp\u003eDesigned for retail, hospitality, gallery and residential applications where lighting requirements change between zones or over time, the SARA eliminates the need to stock multiple fixed-output downlights. A shop might use 3000K at 15W in a soft goods area, 4000K at 25W over a checkout counter, and 5000K at 20W in a back-of-house zone, all using the same fitting. The 0-10V dimmable driver (dimmer compatibility should be verified before installation) allows further control where mood lighting or energy reduction is needed.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium housing with white powder-coated finish dissipates heat from the COB LED efficiently, contributing to the 50,000-hour L70B50 rating. The fitting requires a 140mm cut-out and 160mm minimum ceiling void depth, fitting into standard commercial ceiling grids or plasterboard ceilings. Plug-and-play connectors on the driver allow straightforward installation without hardwiring each connection, and the fitting is compatible with the Knightsbridge EMKIT2 emergency conversion kit where building regulations require maintained or non-maintained emergency lighting.\u003c\/p\u003e\n\u003cp\u003eEach wattage and CCT combination produces a different lumen output, ranging from 1440lm at 15W\/3000K up to 2605lm at 25W\/5000K. The clear glass diffuser and 45-degree beam angle provide a punchy, directional output rather than wide flood, making the SARA suited to accent lighting, task lighting and feature highlighting rather than general ambient fill.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e157 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e40 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eCoB LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/5000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e1440\/1565\/1605\/1900\/2080\/2125\/2335\/2580\/2605 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e3325 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e15 \/ 20 \/ 25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e140.08 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6310690_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1815972.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the wattage and colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth are adjusted via DIP switches on the driver unit before installation. The driver has two sets of switches: one for wattage (15W, 20W or 25W) and one for CCT (3000K, 4000K or 5000K). Once the ceiling is closed the settings cannot be changed without removing the fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires a minimum 160mm ceiling void depth above the plasterboard or ceiling grid. The cut-out diameter is 140mm, and the overall fitting depth including the heatsink is 110mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with all dimmers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SARA is 0-10V dimmable, which is a commercial dimming protocol. It is not compatible with domestic leading-edge or trailing-edge dimmers. Check dimmer compatibility with the driver specification before pairing, as not all 0-10V dimmers behave identically with all drivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for emergency lighting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The SARA is compatible with the Knightsbridge EMKIT2 emergency conversion kit, which converts the fitting to maintained or non-maintained emergency operation where required by building regulations.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293727809803,"sku":"SA1525CAD","price":44.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1670234_fd56f223-5556-4bf0-ae5f-a4df28e6e9a6.jpg?v=1714663343"},{"product_id":"gu10-fixed-recessed-downlight-twist-lock-brass","title":"GU10 Fixed Recessed Downlight Twist \u0026 Lock - Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge RD1B is a fixed GU10 recessed downlight with a brass die-cast aluminium bezel and a twist-lock fitting mechanism. The fitting is pre-wired with a GU10 lamp holder rated for 230V mains, accepting halogen or LED GU10 bulbs up to 50W. The 79mm diameter bezel sits 2mm proud of the ceiling surface once installed, with the lamp recessed 90mm into the ceiling void.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installation in living rooms, hallways, kitchens and bedrooms where task or accent lighting is needed, the downlight requires a 70mm cut-out diameter and a minimum 140mm void depth above the ceiling. The twist-lock mechanism allows the lamp holder assembly to be rotated into position and locked into the ceiling aperture without screws or additional fixings, simplifying installation and lamp replacement.\u003c\/p\u003e\n\u003cp\u003eThe brass finish provides a warm metallic accent that pairs well with traditional, classical and warm-toned interiors. The die-cast aluminium construction provides durability and heat dissipation for halogen lamps, though most current installations use LED GU10 bulbs for lower energy consumption and cooler running. The IP20 rating makes the fitting suitable for dry indoor locations but not bathrooms or outdoor use. Dimming capability depends on the specific GU10 bulb installed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e79 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\/MR16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1416673_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_776156.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 140mm void depth above the ceiling surface is required to accommodate the 90mm recessed depth of the lamp holder assembly plus clearance for heat dissipation and wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb installed. Most dimmable LED GU10 bulbs work with trailing-edge dimmers, but check the specific bulb packaging for compatibility before pairing with a dimmer switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the fitting is suitable for dry indoor locations only. Bathrooms require IP44 or IP65 rated fittings depending on the zone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting accepts standard GU10 bulbs up to 50W. The specification table mentions an MR16 lamp holder, but the primary fitting is GU10 on 230V mains. Most users install 4-7W LED GU10 bulbs in warm white (2700K-3000K). Bulbs are sold separately.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293918519563,"sku":"RD1B","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/157640_657045eb-60a0-42c2-961d-7aaecfd6215f.jpg?v=1714666269"},{"product_id":"gu10-fixed-recessed-downlight-twist-lock-chrome","title":"GU10 Fixed Recessed Downlight Twist \u0026 Lock - Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge RD1C is a fixed GU10 recessed downlight with a chrome bezel and twist-lock fitting system, allowing the lamp holder to be removed for bulb changes without accessing the rear of the ceiling. The die-cast aluminium body houses a pre-wired 230V GU10 lamp holder rated to 50W maximum, compatible with both halogen and LED GU10 bulbs (sold separately).\u003c\/p\u003e\n\u003cp\u003eDesigned for installation in solid ceilings, plasterboard ceilings with joist voids, and suspended ceiling systems where a minimum 140mm void depth is available, the downlight requires a 70mm diameter cut-out and projects just 2mm below the ceiling surface once fitted. The IP20 rating makes it suitable for dry interior rooms including living rooms, bedrooms, hallways and kitchens outside splash zones. The fixed bezel means the light direction cannot be adjusted after installation, making it suited to general ambient lighting rather than accent or task lighting.\u003c\/p\u003e\n\u003cp\u003eThe chrome finish provides a polished metallic accent that pairs with both modern and traditional interiors. The twist-lock mechanism allows the bezel and lamp holder assembly to be rotated and lifted out from the front of the ceiling, giving access to change the bulb without removing ceiling panels or accessing wiring from above. Dimming capability depends on the bulb chosen — most dimmable LED GU10 bulbs work with standard trailing-edge dimmers.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e79 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\/MR16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1416674_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_776154.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 140mm void depth is needed to accommodate the 90mm recessed body plus clearance for the wiring and lamp holder. The cut-out diameter is 70mm and the visible bezel diameter is 79mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the twist-lock mechanism work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe chrome bezel and lamp holder assembly twist into the recessed body and lock in place. To change a bulb, twist the bezel anti-clockwise and lift out from the front of the ceiling — no access to the rear void is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb used. Most dimmable LED GU10 bulbs work with standard trailing-edge dimmers, but check the bulb packaging for compatibility before pairing with a dimmer switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating means it is not protected against moisture ingress and should not be installed in bathroom zones where water splashing is possible. For bathrooms, choose a downlight rated IP44 or higher.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293918552331,"sku":"RD1C","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/104832_1025e4aa-007d-4c49-af13-9b5202dcf832.jpg?v=1714666271"},{"product_id":"gu10-brushed-chrome-recessed-fixed-downlight-twist-lock","title":"GU10 Brushed Chrome Recessed Fixed Downlight - Twist Lock","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge RD1CBR is a fixed recessed downlight with a brushed chrome bezel and a twist-lock GU10 lampholder. The die-cast aluminium housing fits a 70mm ceiling cut-out and requires a minimum 140mm void above the ceiling for installation. The fitting is pre-wired with a GU10 socket rated to 50W maximum, accepting standard GU10 halogen or LED bulbs (sold separately).\u003c\/p\u003e\n\u003cp\u003eDesigned for general lighting in living rooms, bedrooms, hallways and kitchens, the fixed bezel directs light downwards without tilt or rotation. The IP20 rating restricts use to dry indoor areas only — this fitting is not suitable for bathrooms, shower rooms or outdoor installations. The twist-lock mechanism secures the bulb into the lampholder with a quarter-turn, preventing the bulb from working loose over time.\u003c\/p\u003e\n\u003cp\u003eThe brushed chrome finish provides a neutral metallic accent that pairs with both warm and cool-toned interiors. The 79mm outer bezel diameter with just 2mm projection from the ceiling gives a low-profile finish once installed. The die-cast aluminium construction provides rigidity and heat dissipation for halogen bulbs, though most users now pair this fitting with LED GU10 bulbs at 4-6W for lower running costs and cooler operation.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e79 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\/MR16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1416675_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_776152.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 140mm void above the ceiling is needed to accommodate the 90mm recessed depth of the fitting plus clearance for the bulb and wiring. Measure your ceiling void before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this downlight dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming capability depends on the GU10 bulb fitted. LED GU10 bulbs marked as dimmable will work with most trailing-edge dimmers. Non-dimmable LED bulbs will not dim and may flicker or fail if connected to a dimmer circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means this fitting is not protected against moisture ingress and must not be installed in bathrooms, shower rooms or other wet environments. For bathroom use, look for downlights rated IP44 or IP65.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb should I use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAny standard GU10 bulb up to 50W will fit. Most users now choose LED GU10 bulbs between 4-6W and 3000K colour temperature for warm white general lighting. Bulbs are sold separately at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293918585099,"sku":"RD1CBR","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/104830_751813c3-f56a-4668-a7c4-f2c1e02cec85.jpg?v=1714666273"}],"url":"https:\/\/niori.co.uk\/collections\/kitchen-downlights.oembed","provider":"Niori","version":"1.0","type":"link"}