{"title":"IP65 Downlights","description":"\u003cp\u003eOur IP65 downlights are dust-tight and protected against jets of water, and most suit bathrooms and kitchens. The majority have an integrated LED, while many take a replaceable bulb. We stock warm, cool and switchable white, dimmable designs, and outdoor-rated fittings for covered porches and soffits. Trims include white, black and chrome. Whichever you choose, ask a qualified electrician to fit it.\u003c\/p\u003e","products":[{"product_id":"spektroled-evo-4-cct-dimmable-fixed-fire-rated-led-downlight-white","title":"SpektroLED Evo 4-CCT Dimmable Fixed Fire Rated LED Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SpektroLED Evo is a fixed fire-rated LED downlight with selectable wattage (5W or 7W) and four selectable colour temperatures (2700K, 3000K, 4000K, 6000K). The switches controlling both wattage and CCT are located beneath the magnetic bezel, allowing adjustment after installation without removing the fitting from the ceiling. The integrated SMD LED delivers between 580 and 870 lumens depending on the wattage and CCT combination selected.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, kitchens, hallways and living rooms, the downlight carries an IP65 rating from below (IP20 from above), making it suitable for wet zones including Zone 1 in bathrooms. The 70mm cut-out fits standard UK ceiling joists with a 45mm minimum void depth. The fire rating covers 30\/60\/90-minute solid timber, 30-minute web joist and 30-minute i-joist installations, and the fitting is IC-rated for direct contact with thermal insulation. The male-female connector system allows cables to be terminated and hidden until decoration is complete, with the downlight plugged in only after painting.\u003c\/p\u003e\n\u003cp\u003eThe white housing shown is sold without a bezel — magnetic bezels are available separately in white, matt black, chrome, polished chrome, brass and antique brass finishes, allowing the same downlight to match different interior schemes. The pressed steel construction keeps the overall recessed depth to 43mm, making it one of the slimmest fire-rated downlights available for UK ceilings. The fitting is dimmable with trailing-edge dimmers and carries a 5-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e43 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e580\/600\/630\/620\/780\/810\/870\/840 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1020 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e144 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6167462_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan I change the colour temperature after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The CCT selector switch is located beneath the magnetic bezel. Once the downlight is installed, you can remove the bezel magnetically, adjust the switch to select between 2700K, 3000K, 4000K or 6000K, and replace the bezel without disturbing the ceiling mounting or wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for bathroom use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The downlight carries an IP65 rating from below, making it suitable for Zone 1 in bathrooms (directly above baths and showers). The IP rating from above is IP20, so the void space above the ceiling should remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bezel finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is sold without a bezel. Magnetic bezels are available separately in white, matt black, chrome, polished chrome, brass and antique brass. The bezel choice does not affect the light output or colour temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, with trailing-edge dimmers. Check compatibility with your specific dimmer model before installation — leading-edge dimmers may cause flickering or poor dimming performance with LED drivers.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723386123,"sku":"SPKEVF","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607266_7336a57d-cfe5-4482-92d4-6d6144c059fa.jpg?v=1714663257"},{"product_id":"knightsbridge-spektroled-evo-7w-dimmable-tilt-fire-rated-downlight-4-cct-white","title":"Knightsbridge SpektroLED Evo 7W Dimmable Tilt Fire Rated Downlight - 4-CCT White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SpektroLED Evo is a fire-rated recessed downlight with selectable wattage (5W or 7W), four colour temperatures (2700K, 3000K, 4000K, 6000K) and a 90-degree tilt mechanism. The fitting uses an integrated SMD LED array behind a prismatic diffuser, delivering between 565-865 lumens depending on wattage and CCT settings. The white pressed-steel bezel measures 90mm diameter and fits a 70mm cut-out with 56mm recessed depth.\u003c\/p\u003e\n\u003cp\u003eDesigned for new-build and retrofit ceiling installation, the SpektroLED Evo carries 30\/60\/90-minute fire ratings for solid timber joists, 30-minute ratings for web and I-joists, and IC rating for direct contact with loft insulation. The IP65 rating from below makes it suitable for bathroom zones 1 and 2, while the IP20 rating from above allows standard mains wiring in the ceiling void. The 90-degree tilt allows light to be directed onto walls, artworks or feature areas rather than straight down.\u003c\/p\u003e\n\u003cp\u003eThe fitting uses a male-female connector system that separates the downlight body from the mains cable, allowing first-fix wiring to be completed and terminated before decoration, with the luminaire body plugged in and clipped into the ceiling after painting. The same connector allows the fitting to be unplugged for lamp maintenance or redecorating without re-terminating cables. The dimmable driver works with trailing-edge dimmers and the 50,000-hour L70B10 rating suggests the LED will maintain 70% of initial output for approximately 11 years of continuous use.\u003c\/p\u003e\n\u003cp\u003eThe white finish pairs with standard white ceilings in residential, hospitality and commercial settings. Knightsbridge produces the SpektroLED Evo in six finishes (white, matt black, brushed chrome, polished chrome, brass, antique brass) sold as separate SKUs. The CCT and wattage are set via switches on the back of the fitting before installation, allowing a single stock item to cover multiple lighting scenarios.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6173131_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes it suitable for bathroom zones 1 and 2 (directly above a bath or shower enclosure). The IP20 rating from above requires standard ceiling void conditions with no water ingress from the loft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFour CCT settings (2700K, 3000K, 4000K, 6000K) are selected via switches on the back of the fitting before installation. Once the fitting is clipped into the ceiling the setting cannot be changed without removing the downlight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, but only trailing-edge dimmers. Leading-edge dimmers may cause flicker or fail to dim smoothly. Check dimmer compatibility with the manufacturer before installation, particularly when multiple downlights are controlled from a single dimmer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the tilt mechanism allow?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe inner lamp holder tilts up to 90 degrees within the bezel, allowing light to be directed onto walls, artwork or feature areas rather than straight down. The tilt is adjusted by hand after the fitting is installed.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723418891,"sku":"SPKEVTW","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607336_b6d3897e-f2e3-4137-8a39-5163df27e1d6.jpg?v=1714663259"},{"product_id":"spektroled-evo-ip65-tilt-fire-rated-led-downlight-matt-black-4-cct-dimmable","title":"SpektroLED Evo IP65 Tilt Fire Rated LED Downlight - Matt Black 4-CCT Dimmable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SpektroLED Evo is a fire-rated tilt downlight with selectable wattage (5W or 7W), four colour temperatures (2700K, 3000K, 4000K, 6000K) switchable on installation, and a 90-degree tilt mechanism housed in a matt black pressed steel bezel. The IP65 rating from below makes it suitable for bathrooms, shower rooms and wet-use zones as well as standard dry ceiling installations.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and light commercial use, the downlight fits a 70mm ceiling cut-out with a 56mm recessed depth. The male-female power connector system allows first-fix wiring to be terminated and concealed during decoration, with the luminaire itself plugged in and fitted after painting is complete. The same connector lets the fitting be removed for lamp replacement or maintenance without re-wiring. The tilt mechanism provides smooth 90-degree adjustment to direct light onto artwork, worktops, or specific zones within a room.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel construction carries fire ratings of 30\/60\/90 minutes on solid timber joists, 30 minutes on web joists, and 30 minutes on i-joists. The fitting is IC-rated for direct contact with ceiling insulation and carries acoustic rating ISO 10140-2:2010, making it suitable for multi-occupancy installations where sound transmission between floors must be controlled. The selectable wattage allows output to be reduced from 7W to 5W where lower light levels or tighter energy budgets are needed.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish provides a clean contrast against white or light-coloured ceilings and suits contemporary, industrial and minimalist interiors. The downlight is dimmable when paired with trailing-edge dimmers — compatibility should be checked before installation. The four colour temperatures cover warm residential lighting (2700K), hospitality and retail (3000K), office and task lighting (4000K), and clinical or high-contrast applications (6000K), all selectable from the same fitting.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174437_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this downlight dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the SpektroLED Evo is dimmable when paired with trailing-edge dimmers. Compatibility varies by dimmer model, so check with the dimmer manufacturer before installation to confirm it supports LED loads in the 5-7W range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature or wattage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSwitches on the rear of the fitting allow you to select between 2700K, 3000K, 4000K and 6000K colour temperatures, and between 5W and 7W output. These are set during installation and are not accessible once the downlight is fitted into the ceiling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 56mm void depth is needed above the ceiling. The cut-out diameter is 70mm and the visible bezel diameter once fitted is 90mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes it suitable for wet-use zones including directly above showers and baths. The IP rating from above is IP20, so it must be protected from direct water ingress in the ceiling void.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723451659,"sku":"SPKEVTMB","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607322_fd189a25-ac8e-4bb9-8d89-d1d7b8ac4b42.jpg?v=1714663261"},{"product_id":"spektroled-evo-7w-fire-rated-tilt-led-downlight-4-cct-polished-chrome","title":"SpektroLED Evo 7W Fire Rated Tilt LED Downlight 4-CCT - Polished Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SpektroLED Evo is a fire-rated recessed LED downlight with adjustable wattage (5W or 7W) and selectable colour temperature (2700K, 3000K, 4000K, 6000K) controlled by switches on the rear of the fitting. The polished chrome bezel tilts through 90 degrees to direct light onto walls, artwork or specific features within a room. The fitting is IP65 rated from the front and IP20 from above, allowing installation in bathrooms and wet-rated zones.\u003c\/p\u003e\n\u003cp\u003eDesigned for use in ceilings requiring fire certification, the SpektroLED Evo carries 30\/60\/90-minute fire ratings for solid timber joists, 30-minute ratings for web joists and I-joists, and meets acoustic rating ISO 10140-2:2010. The 70mm cut-out fits standard ceiling apertures and the 56mm recessed depth accommodates typical ceiling voids. The fitting is IC-rated for direct contact with loft insulation without overheating. First-fix and second-fix connectors allow the cable to be terminated and concealed during decoration, with the downlight plugged in afterwards.\u003c\/p\u003e\n\u003cp\u003eThe polished chrome finish provides a reflective metallic accent that pairs with both traditional and modern interiors. The pressed steel construction and prismatic diffuser distribute the SMD LED output evenly across a 60-degree beam angle. At 7W the fitting delivers between 745lm and 865lm depending on the CCT selected, giving sufficient task and general lighting for kitchens, bathrooms, hallways and living rooms with 2.4m ceiling heights. The fitting is dimmable with trailing-edge dimmers and carries a 5-year warranty.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174443_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature and wattage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo DIP switches on the rear of the fitting allow you to select between 5W and 7W output and between 2700K, 3000K, 4000K and 6000K colour temperatures. Adjust before installation or after disconnecting mains power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be installed in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from the front allows installation in bathroom zones 1 and 2 (within 2.25m of a bath or shower) provided the fitting is installed correctly with all cable entries sealed. The IP20 rating from above means the ceiling void itself must be dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the tilt mechanism smooth?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel tilts through 90 degrees on a friction joint that holds the selected angle without sagging or needing a locking screw. This allows precise aiming at walls, artwork or specific surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does this carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is rated for 30\/60\/90 minutes in solid timber joists, 30 minutes in web joists and I-joists. It also carries acoustic rating ISO 10140-2:2010 for installations requiring sound insulation between floors.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723517195,"sku":"SPKEVTPC","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607326_9c417de1-e27d-42d6-9270-1d2d23f2616b.jpg?v=1714663263"},{"product_id":"spektroled-evo-4-cct-tilt-fire-rated-led-downlight-brushed-brass-ip65","title":"SpektroLED Evo 4-CCT Tilt Fire-Rated LED Downlight - Brushed Brass IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SpektroLED Evo is a recessed LED downlight with a 90-degree tilt mechanism, selectable colour temperature between 2700K, 3000K, 4000K and 6000K, and selectable 5W or 7W output. The brushed brass bezel sits 90mm wide at the ceiling surface with a 70mm cut-out diameter, fitting into ceilings with a minimum 56mm void depth. The lamp technology is SMD LED with a prismatic diffuser, delivering between 565-865 lumens depending on the CCT and wattage selection.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential bathrooms, kitchens, hallways and living spaces, the downlight carries an IP65 rating from below (IP20 from above), making it suitable for Zone 2 bathroom installations and other wet or humid environments. The fire-rating covers 30\/60\/90-minute solid timber, 30-minute web joist and 30-minute i-joist installations, and the fitting is IC-rated for direct contact with ceiling insulation. The tilt mechanism allows the light beam to be angled up to 90 degrees from vertical, directing light onto walls, worktops or feature areas rather than straight down.\u003c\/p\u003e\n\u003cp\u003eThe fitting uses a male-female connector system that allows cables to be terminated and hidden during decoration, with the downlight body plugged in after the room is finished. This means the brushed brass bezel stays clean during plastering and painting, and the fitting can be unplugged for future maintenance or redecorating without re-wiring. The pressed steel construction and Class II double-insulated design mean no earth connection is required. Dimmable on trailing-edge dimmers (compatibility should be checked before installation).\u003c\/p\u003e\n\u003cp\u003eThe 4-CCT selector allows the installer or end user to choose between warm white (2700K), soft white (3000K), neutral white (4000K) and cool white (6000K) after installation, matching the downlight to the room's natural light or to other fittings in the property. The dual-wattage selector provides 5W for lower-output ambient lighting or 7W where brighter task lighting is needed. Complies with current energy efficiency standards and carries a 5-year manufacturer warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174449_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zone is this suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating from below makes the SpektroLED Evo suitable for Zone 2 bathroom installations (areas outside the shower enclosure or bath area but within 0.6m of them). The IP20 rating from above means the ceiling void must remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA selector switch on the rear of the fitting allows you to choose between 2700K, 3000K, 4000K and 6000K before installation. Once the downlight is fitted and powered, the selected CCT remains fixed until the fitting is removed and the switch changed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat dimmer is compatible?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight is dimmable on trailing-edge (electronic) dimmers. Leading-edge (resistive\/inductive) dimmers are not recommended. Knightsbridge publishes a compatibility list on their website — check before pairing with a specific dimmer model to avoid flicker or limited dimming range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SpektroLED Evo range includes white, matt black, brushed chrome, polished chrome, brushed brass and antique brass finishes. Search Niori for \"SpektroLED Evo\" to see the full range in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723549963,"sku":"SPKEVTB","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607312_7656a5e2-0714-4704-8a93-97494dd7bfbe.jpg?v=1714663266"},{"product_id":"spektroled-evo-7w-tilt-fire-rated-led-downlight-4-cct-brushed-chrome-ip65","title":"SpektroLED Evo 7W Tilt Fire Rated LED Downlight 4-CCT - Brushed Chrome IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SpektroLED Evo is a fire-rated tiltable LED downlight with selectable wattage (5W or 7W) and four selectable colour temperatures (2700K, 3000K, 4000K, 6000K), set on installation via switches on the driver. The brushed chrome bezel surrounds a prismatic diffuser that tilts smoothly through 90 degrees, allowing the beam to be directed towards a focal point or angled across a ceiling slope.\u003c\/p\u003e\n\u003cp\u003eDesigned for contractors and refurbishment projects where flexibility reduces stock complexity, the downlight uses a plug-in connector system that separates first-fix wiring from second-fix installation. The mains cable is terminated at first fix and left in the ceiling void; the downlight itself plugs in after decorating is complete. This same connector allows the fitting to be removed for maintenance or redecorating without re-wiring. The IP65 front rating makes the downlight suitable for bathroom zones 1 and 2, while the fire rating covers 30\/60\/90 minute solid timber installations and 30 minute web joist and i-joist constructions.\u003c\/p\u003e\n\u003cp\u003eThe fitting requires a 70mm cut-out and 56mm minimum void depth. The pressed steel construction and IC (insulation contact) rating mean the downlight can be installed in direct contact with loft insulation without overheating. The brushed chrome finish provides a neutral metallic accent that pairs with both warm and cool bathroom palettes, and the 90mm diameter bezel sits flush with the ceiling surface. Output ranges from 565lm at 5W\/2700K to 865lm at 7W\/4000K, giving flexibility to match the light level to the room size and ceiling height. The fitting is dimmable with trailing-edge dimmers and carries a 5-year warranty.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174453_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zones is this downlight suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 front rating makes the SpektroLED Evo suitable for bathroom zones 1 and 2 (directly above a bath or shower enclosure, and within 60cm of a bath or basin). The rear of the fitting is IP20, so ensure the ceiling void is dry and not exposed to water ingress.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature and wattage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall switches on the LED driver inside the fitting allow you to select between 2700K, 3000K, 4000K and 6000K, and between 5W and 7W output. These are set once during installation, not adjusted in use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the fitting be installed in contact with loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IC (insulation contact) rating means the downlight can be covered by or installed in direct contact with loft insulation without overheating. The fire rating covers 30\/60\/90 minute solid timber installations and 30 minute web joist constructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is dimmable with trailing-edge dimmers. Leading-edge dimmers may cause flicker or hum. Check compatibility with your specific dimmer model before installation.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723582731,"sku":"SPKEVTBC","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607314_36ab4de2-808c-41ba-846f-cec4daa35b5f.jpg?v=1714663268"},{"product_id":"spektroled-evo-7w-tilt-fire-rated-led-downlight-ip65-antique-brass","title":"SpektroLED Evo 7W Tilt Fire Rated LED Downlight IP65 - Antique Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SpektroLED Evo is a 90mm fire-rated downlight with 90-degree tilt adjustment, selectable wattage (5W or 7W), and four selectable colour temperatures (2700K, 3000K, 4000K, 6000K). The fitting runs on 230V mains with no external driver, using loop-in loop-out connectors that allow first-fix cable termination before decoration and second-fix plug-in installation after. The antique brass bezel frames a prismatic diffuser over an SMD LED module rated to 50,000 hours L70B10.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential bathrooms, kitchens, hallways and commercial installations where fire rating, IP65 front protection and adjustable light direction are required, the downlight fits a 70mm ceiling cut-out with 56mm recessed depth. The IP65 rating from below makes it suitable for bathroom zones 1 and 2, while the IP20 rating from above means it can be installed in contact with loft insulation (IC rated). Fire-rating covers 30\/60\/90-minute solid timber joists, 30-minute web joists and 30-minute I-joists (Staircraft), plus acoustic rating to ISO 10140-2:2010.\u003c\/p\u003e\n\u003cp\u003eThe tilt mechanism allows the beam to be angled up to 90 degrees from vertical, directing light onto walls, artwork, or work surfaces rather than straight down. The male-female connector system means the downlight can be unplugged for maintenance or redecorating without re-terminating cables. The antique brass finish provides a warm metallic accent that pairs with traditional and warm contemporary interiors, contrasting with the prismatic white diffuser when lit. The fitting is dimmable on trailing-edge dimmers (compatibility should be checked before installation).\u003c\/p\u003e\n\u003cp\u003eThe selectable wattage switch on the fitting allows output to be set to 5W (565-605 lumens depending on CCT) or 7W (745-865 lumens), giving flexibility to match light levels to room size and ceiling height without changing the fitting. The four CCT options cover warm white (2700K), soft white (3000K), neutral white (4000K) and cool white (6000K), selected via switches on the fitting before installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174457_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zones is this downlight suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating from below makes the SpektroLED Evo suitable for bathroom zones 1 and 2 (directly above a bath or shower). The IP20 rating from above means it should not be installed where water can enter from the ceiling void.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I select the wattage and colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting has switches accessible before installation that allow you to choose between 5W and 7W output, and between 2700K, 3000K, 4000K and 6000K colour temperatures. Once the fitting is installed in the ceiling, these settings cannot be changed without removing the downlight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the downlight be installed in contact with loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The fitting is IC rated (insulation contact), meaning it can be covered by loft insulation without overheating. The fire-rating also covers installation in solid timber joists, web joists and I-joists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the antique brass bezel removable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel is fixed and cannot be changed. Other finishes in the SpektroLED Evo range include white, matt black, brushed chrome, polished chrome and brass — use the search function to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723648267,"sku":"SPKEVTAB","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607306_d6a18823-ff87-47f1-aa90-698975f0523b.jpg?v=1714663270"},{"product_id":"spektroled-evo-dimmable-fire-rated-led-downlight-4-cct-fixed-10-pack","title":"SpektroLED Evo Dimmable Fire Rated LED Downlight 4-CCT Fixed (10 Pack)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SpektroLED Evo is a fire-rated LED downlight with selectable wattage (5W or 7W) and four selectable colour temperatures (2700K, 3000K, 4000K, 6000K) controlled by switches under the magnetic bezel. Each fitting houses an integrated SMD LED behind a prismatic diffuser and sits flush in a 70mm ceiling cut-out with a 90mm finished diameter. The pack contains 10 fittings, each supplied with a white bezel. Additional bezel colours are available separately, allowing finish changes without rewiring.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installation where fire rating, IP65 front protection and dimming capability are required, the SpektroLED Evo carries 30\/60\/90-minute fire ratings for solid timber joists, 30-minute ratings for web joists and i-joists, and IC rating for direct contact with loft insulation. The IP65 rating from below makes it suitable for bathrooms, wet rooms and kitchens, while the IP20 rating from above limits it to dry ceiling voids. The fitting connects directly to 230V mains using Knightsbridge's male-female connector system, which allows first-fix cabling to be terminated and hidden until decoration is complete, then plugged into the downlight at second fix.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel housing requires a 43mm minimum void depth and sits 43mm into the ceiling void once installed. The 60-degree beam angle provides general ambient light rather than narrow spotlighting. Switching between 5W and 7W allows the installer to reduce maximum light output where lower illumination is needed or increase it where brighter task lighting is required. Output ranges from 580 lumens at 5W\/2700K to 870 lumens at 7W\/4000K. The fitting is dimmable with trailing-edge dimmers (compatibility should be confirmed before installation). The L70B10 rating of 50,000 hours indicates the LED will maintain 70% of its initial output for approximately 22 years at 6 hours daily use.\u003c\/p\u003e\n\u003cp\u003eThe magnetic bezel clips onto the downlight body after installation, allowing it to be removed for access to the wattage and CCT switches without disturbing the ceiling mounting or wiring. The Class II rating means no earth connection is required. The fitting carries a 5-year warranty and complies with post-2021 energy efficiency standards (Energy Rating Class C). Acoustic rating to ISO 10140-2:2010 limits sound transmission through the ceiling void.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e43 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e43 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e580\/600\/630\/620\/780\/810\/870\/840 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1020 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e144 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174740_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes it suitable for bathroom zones 1 and 2 (outside the shower enclosure but within 60cm of a bath or shower tray). The IP20 rating from above means the ceiling void must remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature changed after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe magnetic bezel clips off without tools, exposing two switches underneath. One switch selects wattage (5W or 7W), the other cycles through the four colour temperatures (2700K, 3000K, 4000K, 6000K). The bezel clips back on after adjustment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 43mm void depth is required. The fitting sits 43mm into the ceiling void and requires a 70mm diameter cut-out. Existing downlight apertures of 60-75mm can usually accommodate the SpektroLED Evo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel colour be changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Knightsbridge offers the SpektroLED Evo bezel in six finishes (sold separately). The magnetic bezel system allows the finish to be changed without rewiring or removing the downlight from the ceiling.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293724303627,"sku":"SPKEVFS10","price":118.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607290_5c29eaa6-bb38-405c-baa0-ff5a97efae5d.jpg?v=1714663286"},{"product_id":"ip65-gu10-recessed-downlight-chrome","title":"IP65 GU10 Recessed Downlight - Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP65 GU10 recessed downlight features a chrome-finished die-cast aluminium bezel with a clear glass lens protecting the lamp cavity from water ingress. The IP65 rating from below allows installation in shower zones, directly above baths, and in other wet areas where standard downlights cannot be used. The fitting accepts any GU10 halogen or LED lamp up to 35W (lamp sold separately).\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, shower rooms, wet rooms and outdoor covered areas, the downlight requires a ceiling void depth of at least 140mm and a 64mm circular cut-out in the plasterboard or ceiling material. The 84mm chrome bezel sits 6mm proud of the ceiling surface once installed, giving a defined metallic accent without significant projection. The fitting connects to 230V mains via a Class I earthed connection and is compatible with both halogen and LED GU10 lamps.\u003c\/p\u003e\n\u003cp\u003eThe chrome finish provides a reflective metallic accent that pairs cleanly with chrome taps, towel rails and shower fittings in traditional and contemporary bathrooms. The die-cast aluminium construction dissipates heat efficiently when paired with halogen lamps, while the IP65 seal around the lens keeps moisture, steam and splashed water out of the lamp cavity. Note that while the fitting is IP65 from below, it rates IP20 from above — the void space must remain dry.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e23 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e64 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1415324_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_797562.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be installed in a shower enclosure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below allows installation directly above a shower tray or bath, including within the shower enclosure itself. The glass lens and sealed bezel prevent water ingress from steam, splashing and direct spray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 140mm void depth is needed to accommodate the 90mm recessed body of the fitting plus clearance for the GU10 lamp and wiring. Measure from the finished ceiling surface to the floor joist or concrete slab above before cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The fitting accepts any GU10 halogen or LED lamp up to 35W. Most users pair this with a 5-7W GU10 LED in warm white (2700K-3000K) for bathroom lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the lamp you install. GU10 LED lamps marked as dimmable will work with compatible trailing-edge dimmers. Non-dimmable LEDs and most halogen GU10s are not designed for dimming circuits.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293919731979,"sku":"RDSHC","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/113038_c752367f-0a98-40de-b1c2-e5ede10bed01.jpg?v=1714666287"},{"product_id":"ip65-gu10-recessed-downlight-brushed-chrome","title":"IP65 GU10 Recessed Downlight - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP65 GU10 recessed downlight is a die-cast aluminium fitting with a brushed chrome faceplate designed for wet-rated installation in bathrooms, shower rooms and outdoor covered areas. The IP65 rating protects against water jets from any direction when viewed from below, while the ceiling void side carries IP20 rating requiring dry installation conditions above the fitting.\u003c\/p\u003e\n\u003cp\u003eThe 64mm cutout diameter and 90mm recess depth suit standard ceiling constructions with a minimum 140mm void depth between the ceiling surface and the structure above. The fitting takes any GU10 bulb up to 35W (sold separately), providing compatibility with halogen or LED GU10 lamps depending on the light output and colour temperature required. Dimming capability depends on the bulb selected — most LED GU10s now support dimmer operation if paired with a compatible trailing-edge dimmer.\u003c\/p\u003e\n\u003cp\u003eThe brushed chrome finish provides a neutral metallic accent that pairs with both warm and cool bathroom colour schemes without dominating the ceiling plane. The 84mm visible diameter sits flush with the ceiling once installed, with a 6mm projection from the ceiling surface. The die-cast aluminium construction provides heat dissipation for higher-wattage halogen bulbs, though most installations now use 4-6W LED GU10 lamps which generate minimal heat and last significantly longer than halogen equivalents.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e23 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e64 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1416258_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_797564.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a shower cubicle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating protects against direct water jets when viewed from below, making it suitable for shower cubicles and wet zones in bathrooms. The ceiling void above must remain dry (IP20 from above), so ensure the ceiling construction prevents moisture ingress into the void space.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb should I use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes any GU10 bulb up to 35W (sold separately). Most users now choose LED GU10 lamps between 4-6W and 2700K-4000K colour temperature. LED bulbs provide equivalent light output to 35-50W halogen while consuming less power and lasting significantly longer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 140mm void depth is required between the ceiling surface and the structure above. The fitting itself recesses 90mm into this void, with the remaining clearance needed for the GU10 bulb and wiring connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb you install. Most modern LED GU10 bulbs are dimmable if paired with a compatible trailing-edge dimmer. Check the bulb packaging for dimmer compatibility before purchasing.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293920583947,"sku":"RDSHCBR","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/113040_7276fa9b-5cc3-4d9c-95ec-6c887e63d6db.jpg?v=1714666289"},{"product_id":"ip65-gu10-recessed-downlight-white","title":"IP65 GU10 Recessed Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP65 GU10 recessed downlight is a white die-cast aluminium fitting rated for use in bathrooms, shower rooms and other wet areas where spray or condensation is present. The IP65 rating applies to the front face of the fitting (protection against water jets from any direction), while the top side holds an IP20 rating for installation within ceiling voids.\u003c\/p\u003e\n\u003cp\u003eDesigned for recessed ceiling installation with a 64mm cut-out diameter and a minimum void depth of 140mm above the ceiling surface, the downlight accepts any standard GU10 halogen or LED bulb up to 35W (bulb sold separately). The 6mm projection from the ceiling keeps the fitting low-profile, while the white finish blends into white or light-toned ceilings. The die-cast aluminium body provides structural integrity and heat dissipation for halogen bulbs, while remaining cool enough for LED operation.\u003c\/p\u003e\n\u003cp\u003eThe Class I earthed construction requires connection to a protective earth terminal during installation, following BS 7671 wiring regulations for bathroom zones. Dimmer compatibility depends on the bulb installed — halogen GU10s dim on standard trailing-edge dimmers, while LED GU10s require LED-compatible dimmers matched to the specific bulb model. The 84mm external diameter and 23mm height give the fitting a compact profile that suits standard ceiling joists at 400mm centres.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e23 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e64 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1416257_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_797566.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom shower area?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating protects against water jets from any direction, making it suitable for installation in bathroom zones 1 and 2 (inside and adjacent to shower enclosures). The fitting must be installed by a qualified electrician following BS 7671 bathroom zone regulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum void depth of 140mm above the ceiling surface is required to accommodate the 90mm recessed depth of the fitting and allow clearance for the GU10 bulb and heat dissipation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimmer compatibility depends on the GU10 bulb installed. Halogen GU10s typically work with standard trailing-edge dimmers, while LED GU10s require LED-compatible dimmers matched to the specific bulb model. Check the bulb manufacturer's dimmer compatibility list before pairing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb should I use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting accepts any standard GU10 bulb (halogen or LED) up to 35W. Most users pair this with a 4-7W LED GU10 in 3000K-4000K for bathroom lighting, which provides 300-600 lumens of directional light while remaining cool to touch.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293921009931,"sku":"RDSHW","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/113042_6b972b8f-f763-4c5c-b608-1bb067d6087c.jpg?v=1714666291"},{"product_id":"ip65-fire-rated-gu10-downlight-brushed-chrome-fixed","title":"IP65 Fire-Rated GU10 Downlight - Brushed Chrome Fixed","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP65 fire-rated GU10 downlight combines sealed moisture protection with structural fire-rating in an 84mm diameter pressed steel housing finished in brushed chrome. The IP65 rating from below protects against water jets and dust ingress, making this downlight suitable for bathrooms, shower rooms and covered outdoor soffits, while the 30\/60\/90-minute fire rating on solid timber joists prevents flame and smoke spread through ceiling voids.\u003c\/p\u003e\n\u003cp\u003eDesigned for new-build and retrofit installation, the downlight uses a fast-fix spring clip system that grips the ceiling aperture without screws, and push-fit terminal blocks allow loop-in\/loop-out wiring without a screwdriver. The 69mm cut-out diameter suits standard holesaw sizes and the 167mm minimum void depth accommodates most UK residential joist spacings. The fixed bezel directs light straight down, making this downlight suitable for general bathroom lighting, hallway runs and kitchen perimeter zones where adjustable spots are not needed.\u003c\/p\u003e\n\u003cp\u003eThe brushed chrome bezel finish provides a neutral metallic accent that pairs with chrome taps, towel rails and cabinet hardware in bathrooms, or with stainless steel appliances in kitchens. The downlight accepts any GU10 halogen or LED lamp up to 35W (sold separately), with dimming performance dependent on the lamp model chosen. The IC rating when paired with a maximum 6W LED lamp allows the fitting to be covered with loft insulation without overheating, reducing thermal bridging in ceiling voids.\u003c\/p\u003e\n\u003cp\u003eFire-rating performance varies by joist construction: 30\/60\/90 minutes on solid timber joists, 30 minutes on web-joists and 30 minutes on I-joists (Staircraft). The IP20 rating from above means the fitting is not sealed against dust or moisture penetration from the ceiling void side, so condensation-prone loft spaces may require additional vapour barrier measures during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e117 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e167 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e69 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3699122_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_329672.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this downlight be used in bathrooms and shower rooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below protects against water jets, making this downlight suitable for Zone 1 and Zone 2 bathroom installation according to BS 7671 wiring regulations. The sealed bezel prevents moisture entering the lamp holder during showering or bathing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire-rating does it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFire-rating varies by joist construction. On solid timber joists the downlight provides 30\/60\/90-minute fire integrity, preventing flame and smoke spread through the ceiling void. On web-joists and I-joists (Staircraft) the rating is 30 minutes. These ratings apply when the downlight is correctly installed according to the manufacturer's instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a GU10 bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. GU10 lamps are sold separately. The downlight accepts any standard GU10 halogen or LED lamp up to 35W maximum. Most users pair this with a 4-6W LED GU10 in warm white (2700K-3000K) for bathroom or hallway lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be covered with loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, but only when fitted with a maximum 6W LED lamp. At this wattage the downlight carries an IC (Insulation Contact) rating, meaning it can be covered with loft insulation without overheating. Using higher-wattage lamps requires a 200mm clearance around the fitting to prevent thermal build-up.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294020788491,"sku":"VFCFIPBC","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/663620_d5c959e1-e85f-4ce3-a671-fcf5b404c1a6.jpg?v=1714667359"},{"product_id":"ip65-fire-rated-gu10-downlight-chrome-fixed","title":"IP65 Fire-Rated GU10 Downlight - Chrome Fixed","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge VFCFIPC is a fixed GU10 downlight with IP65 front protection and fire-rated construction to 30\/60\/90 minutes in solid timber joists, 30 minutes in web-joists and I-joists. The chrome bezel sits 5mm proud of the ceiling surface around a 69mm diameter cut-out, and the pressed steel housing recesses 117mm into the ceiling void with a total minimum void requirement of 167mm.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathroom zones 1 and 2, wet-room ceilings, kitchens prone to steam, and commercial spaces requiring IP65 ingress protection, the downlight uses push-fit terminals for fast installation and supports loop-in\/loop-out wiring. The GU10 lamp holder accepts both LED and halogen bulbs up to 35W (sold separately), with dimming dependent on the bulb type chosen. When fitted with a maximum 6W LED lamp, the fitting is IC-rated for direct contact with insulation.\u003c\/p\u003e\n\u003cp\u003eThe chrome finish is a bright reflective electroplate that pairs with chrome taps, towel rails and accessories in bathrooms, or with brushed and polished chrome kitchen hardware. The 84mm diameter bezel is small enough to fit typical bathroom ceiling grids without crowding adjacent fittings. The fire-rated intumescent seal expands under heat to maintain the ceiling's fire resistance rating where the downlight penetrates it.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e117 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e167 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e69 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3699846_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_329670.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating allows installation in bathroom zones 1 and 2, including directly above a bath or shower enclosure. The IP65 protection is from the front (ceiling side) only — the top of the fitting in the void is IP20.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is fire-rated to 30\/60\/90 minutes in solid timber joists, 30 minutes in web-joists, and 30 minutes in I-joists (Staircraft). The intumescent seal expands under heat to maintain the ceiling's fire resistance where the downlight penetrates it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 167mm void is required to accommodate the 117mm recessed depth of the housing plus clearance above. Measure from the finished ceiling surface to the underside of the floor or roof structure above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb fitted. Dimmable LED GU10 bulbs will dim when paired with a compatible LED dimmer. Non-dimmable bulbs will not respond to a dimmer and may flicker or fail.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294020854027,"sku":"VFCFIPC","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/331830_741edb3f-423b-4f95-95d9-9f375f6ccc00.jpg?v=1714667361"},{"product_id":"ip65-fire-rated-fixed-gu10-downlight-white","title":"IP65 Fire-Rated Fixed GU10 Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP65 fire-rated fixed GU10 downlight combines bathroom-grade water resistance with 30\/60\/90-minute fire protection behind a white pressed-steel bezel. The IP65 rating seals the fitting from below against water jets and dust ingress, making it compliant for use in bathroom zones 1 and 2, while the fire rating meets Building Regulations for ceiling penetrations in solid timber, web-joist and I-joist constructions.\u003c\/p\u003e\n\u003cp\u003eDesigned for new builds and retrofit installation, the downlight requires a 69mm cut-out diameter and a minimum ceiling void depth of 167mm to accommodate the rear housing and fire hood. Push-fit terminals accept loop-in\/loop-out wiring without requiring a screwdriver, speeding installation across multiple fittings. The unit accepts any GU10 halogen or LED bulb up to 35W (sold separately), with dimming capability dependent on the bulb specification rather than the fitting.\u003c\/p\u003e\n\u003cp\u003eThe white finish on the 84mm diameter bezel sits flush with the ceiling surface, projecting only 5mm below the plasterboard or render line once installed. The pressed-steel construction handles the heat dissipation from higher-wattage halogen bulbs, though the fitting also carries IC insulation-contact rating when paired with LED bulbs up to 6W, allowing loft insulation to be packed around the housing without creating a fire risk. Fire certification covers 30-minute protection in web-joist and Staircraft I-joist installations, and extends to 60 and 90 minutes in solid timber ceilings depending on joist depth and specification.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e117 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e167 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e69 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3707042_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_329668.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes the fitting compliant for bathroom zones 1 and 2, including directly above a bath or inside a shower enclosure where water jets are present. The IP20 rating from above means the top of the fitting in the ceiling void is not protected against water ingress, so avoid installation directly below an unlined loft tank or leak-prone area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum void depth of 167mm is needed to accommodate the rear housing and fire hood. The recessed depth of the fitting body itself is 117mm, with the additional 50mm required for the fire protection hood that sits above the housing in the void.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a GU10 bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the bulb is sold separately. The fitting accepts any GU10 halogen or LED bulb up to 35W. Most installations use a 5-7W LED GU10 in warm white (2700K-3000K) for general bathroom or kitchen lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb you fit, not the downlight housing. If you pair the fitting with a dimmable GU10 LED and a compatible dimmer switch, the installation will dim. Non-dimmable bulbs will not respond to a dimmer even if the fitting itself is capable of handling the load.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294021017867,"sku":"VFCFIPW","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/663630_4e9f1cc4-2850-4c06-9b57-115510965ea3.jpg?v=1714667364"},{"product_id":"fire-rated-ip65-gu10-shower-downlight-brass","title":"Fire-Rated IP65 GU10 Shower Downlight - Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge fire-rated IP65 shower downlight is a GU10 recessed fitting with a brass bezel, built for wet zones and fire compartment ceilings. The IP65 rating on the front face allows installation in bathroom zones 1 and 2 where direct water spray is present, while the IP20 rating from above permits insulation to rest directly against the fitting's back box without overheating risk.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential bathrooms, shower rooms and wet zones in commercial settings, the fitting meets Building Regulations Part B and is tested to BS476 Parts 21 and 23 for fire integrity. It achieves 30-minute fire resistance in web-joist and I-joist ceilings, 60-minute in solid timber, and 90-minute in standard solid timber constructions. The 70mm cut-out diameter suits standard ceiling joist spacing and the 118mm recessed depth fits typical void depths above plasterboard ceilings.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium and pressed steel construction gives the fitting structural rigidity for repeated lamp changes. A twist-and-lock front ring secures the GU10 bulb in place and the brass finish provides a warm metallic accent that pairs with brass taps, towel rails and traditional bathroom fittings. Electrical termination is via a 10A connector block within a secure enclosure with cord grip, and spring clips fix the unit to the ceiling with a recommended maximum plasterboard thickness of 30mm. The fitting accepts GU10 halogen, LED or CFL bulbs up to 35W (sold separately), with dimmability depending on the bulb chosen.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e118 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306127_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800424.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom shower cubicle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 front face rating permits installation in bathroom zones 1 and 2 where direct water spray is present, making it suitable for fitting directly above or adjacent to a shower head.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is tested to BS476 Parts 21 and 23 and meets Building Regulations Part B. It achieves 30-minute fire resistance in web-joist and I-joist ceilings, 60-minute in solid timber, and 90-minute in standard solid timber constructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan insulation touch the back of the fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The fitting is insulation-compatible with an IP20 rating from above, meaning loft insulation can rest directly against the back box without causing overheating or voiding the fire rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb you fit. Pair with a dimmable GU10 LED and a compatible dimmer switch to achieve dimming. The fitting itself does not restrict dimmer compatibility.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294023672075,"sku":"VFRSHGICB","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/101046_30c647c5-cce5-4194-86b5-aa35de4580d1.jpg?v=1714667394"},{"product_id":"fire-rated-ip65-shower-downlight-gu10-chrome","title":"Fire-Rated IP65 Shower Downlight GU10 - Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge VFRSHGICC is a fire-rated IP65 shower downlight with a chrome bezel, pressed steel housing and a GU10 lamp fitting. The IP65 rating from below makes it suitable for bathroom zones 1 and 2, while the fire-rated construction provides 30\/60\/90 minute protection in solid timber ceilings, 30 minutes in web-joist construction and 30 minutes in I-joist installations.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, shower rooms and wet-room ceilings where both moisture protection and fire safety are required by Building Regulations, the downlight fits a 70mm ceiling cut-out and requires 118mm recessed depth above the ceiling line. The twist-and-lock front ring secures the GU10 lamp without tools and the spring clip fixings accommodate ceiling thicknesses up to 30mm. The insulation-compatible housing allows loft insulation to be laid directly over the fitting without creating a clearance gap.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel and aluminium housing with integrated intumescent padding meets BS476 Part 21 and 23 fire safety standards and complies with Building Regulations Part B. Electrical termination is via a 10A connector block inside a secure enclosure with cord grip, requiring earth connection (Class I). The chrome bezel projects 7mm below the ceiling surface once installed and accepts any GU10 halogen, LED or CFL lamp up to 35W. Dimmability depends on the lamp chosen.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e118 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306137_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800434.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a shower cubicle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes it suitable for bathroom zone 1 (directly above a bath or shower) and zone 2 (within 600mm of a bath or shower). The rating from above is IP20, so the ceiling void must remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires 118mm recessed depth above the ceiling line and a 70mm cut-out diameter. The spring clips accommodate ceiling thicknesses up to 30mm. Check your ceiling void depth before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a GU10 lamp?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The lamp is sold separately. The fitting accepts any GU10 halogen, LED or CFL lamp up to 35W. Most installations now use GU10 LED lamps between 4-7W for lower running costs and heat output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 lamp you choose. If you install a dimmable GU10 LED, the fitting will dim when paired with a compatible LED dimmer switch. Non-dimmable GU10 lamps will not dim regardless of the switch.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294023704843,"sku":"VFRSHGICC","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/101044_f58dc8a0-2b2d-448b-af2c-a28d459ffcb7.jpg?v=1714667396"},{"product_id":"fire-rated-shower-downlight-ip65-gu10-brushed-chrome","title":"Fire-Rated Shower Downlight IP65 GU10 - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge fire-rated shower downlight is a fixed GU10 recessed fitting rated IP65 from below and IP20 from above, with a die-cast pressed steel and aluminium body and a brushed chrome front bezel. The fitting is fire-rated to 30\/60\/90 minutes in solid timber joists, 30 minutes in web-joists and 30 minutes in I-joists (Staircraft), tested to BS476 Part 21 \u0026amp; 23 and compliant with Building Regulations Part B (Fire Safety).\u003c\/p\u003e\n\u003cp\u003eDesigned for bathroom zones 1 and 2, shower enclosures, wet rooms and outdoor soffits where water ingress and fire containment are both required, the fitting requires a 70mm cut-out hole and projects 7mm below the ceiling line when installed. The recessed depth of 118mm fits between standard 150mm joist centres and the fitting is insulation compatible, meaning loft insulation can be laid directly over the housing without causing overheating or voiding the fire rating.\u003c\/p\u003e\n\u003cp\u003eThe GU10 lamp holder accepts halogen, LED or CFL GU10 bulbs up to 35W (sold separately) and the fitting is dimmable depending on the bulb used. Electrical connection is via a 10A connector block inside a secure enclosure with a cord grip for strain relief. The brushed chrome bezel uses a twist-and-lock ring to hold the lamp in place and provides a low-sheen metallic finish that pairs well with chrome taps, shower fittings and bathroom accessories. Spring clips secure the fitting into the ceiling void and are rated for ceiling thicknesses up to 30mm.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e118 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306140_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800436.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP65 mean and which bathroom zones is this suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 means the fitting is protected against water jets from any direction. This makes it suitable for bathroom zones 1 and 2, including directly above a bath or inside a shower enclosure. From above (in the ceiling void) the fitting is rated IP20, so it should not be installed where the ceiling void itself is exposed to water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does fire-rated mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFire-rated downlights contain an intumescent pad that expands when exposed to heat, sealing the cut-out hole to prevent fire spreading from the room below into the ceiling void. This fitting is rated to 30\/60\/90 minutes in solid timber joists, 30 minutes in web-joists and 30 minutes in I-joists, and is compliant with Building Regulations Part B (Fire Safety).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The fitting accepts any standard GU10 halogen, LED or CFL bulb up to 35W. Most users pair it with a 5-7W GU10 LED in warm white (2700K-3000K) for bathroom lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting itself is dimmable, but dimmer compatibility depends on the GU10 bulb you fit. Use a dimmable GU10 LED or halogen bulb and pair it with a compatible trailing-edge dimmer.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294023934219,"sku":"VFRSHGICCBR","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/101042_77059b8d-f4f8-4592-b09c-9ed07936783f.jpg?v=1714667399"},{"product_id":"ip65-fire-rated-shower-downlight-gu10-white","title":"IP65 Fire-Rated Shower Downlight GU10 - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP65 fire-rated shower downlight is a die-cast recessed fitting designed for wet zones in bathrooms, shower rooms and utility areas. The GU10 socket accepts halogen, LED or CFL bulbs up to 35W (sold separately), and the IP65 front bezel protects against water jets from any direction. The fitting carries 30\/60\/90-minute fire ratings for solid timber construction, 30-minute for web-joist and I-joist installations, tested to BS476 Part 21 \u0026amp; 23 and compliant with Building Regulations Part B.\u003c\/p\u003e\n\u003cp\u003eInstallation requires a 70mm ceiling cut-out and 118mm recessed depth above the ceiling line. The fitting is insulation compatible, allowing loft insulation to be laid over the housing without creating a fire risk or overheating the lamp. Spring clips hold the housing in the ceiling with a maximum recommended ceiling thickness of 30mm. The front bezel uses a twist-and-lock ring to secure the lamp, which allows bulb changes without removing the bezel or disturbing the ceiling cut-out.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel and aluminium construction provides structural integrity for fire-rated performance while keeping the fitting light enough for plasterboard installation. The white powder-coat finish on the bezel sits flush with ceilings and matches standard white emulsion tones. Electrical connection is made via a 10A connector block inside the housing with a cord grip for cable strain relief. The fitting is Class I and must be earthed. Dimming capability depends on the bulb chosen — most GU10 LED bulbs are dimmable when paired with a compatible LED dimmer.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e118 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306187_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800432.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathroom shower zones?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating means the front bezel is protected against water jets, making it suitable for Zone 1 and Zone 2 in bathrooms (directly above a shower or bath). The IP20 rating from above means the housing is not protected against water ingress from the loft side, so it should not be installed where water can reach the top of the housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling depth is needed for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires 118mm of recessed depth above the ceiling and a 70mm diameter cut-out through the ceiling material. The spring clips are designed for ceiling thicknesses up to 30mm, which covers standard plasterboard on timber joists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming capability depends on the GU10 bulb installed. Most GU10 LED bulbs are dimmable when paired with a compatible LED dimmer switch. Halogen GU10 bulbs are dimmable with standard resistive or trailing-edge dimmers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. GU10 bulbs are sold separately. The fitting accepts GU10 halogen, LED or CFL bulbs up to 35W. For bathroom use, a warm-white LED GU10 between 4-6W and 2700K-3000K is typical.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294024491275,"sku":"VFRSHGICW","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/101040_dd7a4c38-7b50-48f3-8b6b-1b653bfc5757.jpg?v=1714667401"},{"product_id":"slim-ip65-fixed-round-recessed-downlight-gu10-black","title":"Slim IP65 Fixed Round Recessed Downlight GU10 - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Maytoni Slim is an 85mm diameter fixed recessed downlight in black powder-coated aluminium, rated IP65 for outdoor installation. The fitting accepts a single GU10 bulb up to 50W (sold separately) and sits flush once recessed into a ceiling or wall cavity, with only the 40mm-deep black bezel and lens visible on the finished surface.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor walls, soffits, covered porches and pathway ceilings, the IP65 rating protects the lamp holder and wiring from water jets and dust ingress, making the fitting suitable for exposed positions under eaves or in courtyard pergolas. The fixed downlight beam cannot be adjusted once installed, so positioning determines where the light falls — typically used to create pools of light on pathway surfaces, steps, or to graze textured wall finishes.\u003c\/p\u003e\n\u003cp\u003eThe powder-coated black aluminium finish resists corrosion in damp conditions and pairs with modern, industrial and minimalist exterior schemes. The 85mm cut-out fits between standard ceiling joist centres, and the spring-clip retention system allows the fitting to be removed for bulb changes or redecorating without disturbing the plaster or render around the aperture. The GU10 fitting accepts LED, halogen or energy-saving bulbs in warm white, cool white or daylight colour temperatures depending on the intended application.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e8.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_C064CL-01-15W4K-D-RD-B.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP65 mean for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 means the fitting is protected against dust ingress (IP6X) and low-pressure water jets from any direction (IPX5). This makes it suitable for exposed outdoor positions including soffit lighting, covered porches, pergolas and exterior walls under eaves, but not for ground burial or full submersion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take and is one included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes a single GU10 bulb up to 50W maximum. Bulbs are sold separately. Most users pair this with a 5-7W GU10 LED in either warm white (2700K-3000K) for ambient outdoor lighting or cool white (4000K-5000K) for security or task lighting on steps and pathways.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the light direction be adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a fixed downlight — the beam direction is straight down once installed. If adjustable beam direction is needed, look for tiltable or gimbal recessed fittings in the same IP rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size aperture is needed for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 85mm diameter refers to the visible bezel. The cut-out diameter required in the ceiling or wall will be slightly smaller — refer to the product manual linked in the Downloads tab for the exact cut-out dimension and minimum cavity depth behind the finished surface.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724732260619,"sku":"DL088-GU10-RD-B","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL088-GU10-RD-B_on_w_standard_86d4dce8-b43c-4e20-9a9b-7c2241f6ed13.jpg?v=1737122975"},{"product_id":"slim-ip65-outdoor-recessed-downlight-gu10-matte-gold","title":"Slim IP65 Outdoor Recessed Downlight GU10 - Matte Gold","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Maytoni Slim is an IP65-rated outdoor recessed downlight with a matte gold finish, an 8.5cm diameter bezel and a 4cm recess depth. The fitting takes a single GU10 bulb up to 50W (sold separately) and is built from powder-coated aluminium, making it suitable for exposed outdoor installation in covered soffit areas, porch ceilings, and outdoor entertainment spaces.\u003c\/p\u003e\n\u003cp\u003eDesigned for patios, covered terraces, garden canopies and carport ceilings, the downlight installs into a recessed ceiling void with the bezel sitting flush to the ceiling surface once fitted. The IP65 rating protects against dust ingress and water jets from any direction, so the fitting can handle rain exposure in covered locations but is not rated for full submersion or uncovered ground-level installation where it would be subject to standing water.\u003c\/p\u003e\n\u003cp\u003eThe matte gold finish on the aluminium bezel provides a warm metallic accent that pairs with brass door furniture, gold-tone exterior light fittings and warm-painted timber finishes. The fixed downlight direction suits general area lighting rather than accent spotlighting. At 8.5cm diameter, the bezel is compact enough for multiple fittings spaced at 1-1.5m intervals across a porch or outdoor dining area ceiling without visual crowding.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e8.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatte gold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_C064CL-01-15W4K-RD-B.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP65 mean for outdoor installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 provides full dust protection and protection against water jets from any direction. The fitting can handle rain exposure in covered locations like porch ceilings and soffit areas, but is not rated for uncovered ground-level installation where standing water might collect.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight takes a single GU10 bulb up to 50W maximum, sold separately. Most users pair this with a warm-white LED GU10 bulb between 4-7W and 2700K-3000K for outdoor ambient lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling depth is needed for recessed installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires a minimum 4cm recess depth above the ceiling surface for the lamp holder and wiring connections. The 8.5cm diameter bezel sits flush to the ceiling once installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the light direction be adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, this is a fixed downlight. The beam direction is perpendicular to the ceiling surface and cannot be tilted or rotated once installed.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724732948747,"sku":"DL088-GU10-RD-MG","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL088-GU10-RD-MG_on_w_standard_e9ea6ede-2b10-4d35-9401-ae4331ec3102.jpg?v=1737122973"},{"product_id":"slim-ip65-outdoor-recessed-downlight-gu10-white","title":"Slim IP65 Outdoor Recessed Downlight GU10 - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Slim is an 85mm diameter fixed recessed downlight with an IP65 weatherproof rating, designed for outdoor installation in soffits, patio ceilings and garden structures. The white powder-coated aluminium body fits a 40mm ceiling recess, with the fixture sitting flush once installed. A GU10 bulb (sold separately) provides the light source, up to a maximum 50W rating.\u003c\/p\u003e\n\u003cp\u003eDesigned for dry-location outdoor areas under cover, the IP65 rating protects the internal components from dust ingress and low-pressure water jets, making the fitting suitable for unheated garages, carports, covered balconies and porch ceilings. The fixed orientation directs light straight down, providing functional illumination for pathways, seating areas and doorways. The 85mm diameter aperture casts a focused beam, typically lighting a 1-1.5m diameter area from a 2.4m ceiling height.\u003c\/p\u003e\n\u003cp\u003eThe white finish pairs with typical soffit colours and ceiling boards used in UK residential construction. Powder-coated aluminium resists corrosion from damp conditions better than painted mild steel, and the matt surface prevents glare when viewed from adjacent windows. The shallow 40mm recess depth allows installation in standard 50mm ceiling cavities with room for wiring above.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e8.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_C064CL-01-25W4K-RD-WB.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight takes a standard GU10 bulb up to 50W maximum, sold separately. Most installations use a GU10 LED bulb between 5-7W and 3000K-4000K for outdoor areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating makes it suitable for outdoor use under cover. For bathroom installation, confirm the specific zone requirements with a qualified electrician, as bathroom zones have additional regulations beyond the IP rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires a 40mm recess depth plus clearance above for wiring and the GU10 lamp holder. A 50mm minimum ceiling cavity depth is recommended for safe installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the fitting dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting itself does not restrict dimming. Dimmer compatibility depends on the GU10 bulb you choose — select a dimmable-rated GU10 LED if you intend to use a dimmer switch.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724735439115,"sku":"DL088-GU10-RD-W","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL088-GU10-RD-W_on_w_standard_199fa5eb-0f74-424a-b0f1-782aba038eb0.jpg?v=1737122969"},{"product_id":"stark-fixed-round-recessed-downlight-ip65-black","title":"Stark Fixed Round Recessed Downlight IP65 - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Stark is an 84mm fixed recessed downlight with a matt black aluminium bezel and an IP65 rating that protects the fitting against dust ingress and water jets from any direction. The fitting accepts a single GU10 bulb (sold separately) up to 50W and sits 29mm deep once installed, making it suitable for shallow ceiling voids where deeper housings would not fit.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, kitchens, covered outdoor areas and commercial spaces where moisture or dust exposure is a factor, the IP65 rating allows the Stark to be installed in bathroom zones 1 and 2, above showers, near kitchen sinks, or under covered porches and canopies. The fixed bezel directs light straight down without adjustment, so it works best for general ambient lighting rather than accent or directional tasks. The 84mm diameter suits standard ceiling cutouts and pairs cleanly with other downlights on a grid layout.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish contrasts with white or light-coloured ceilings and pairs comfortably with contemporary, industrial and minimalist interiors. The aluminium construction keeps the fitting lightweight at approximately 150g per unit, reducing strain on ceiling fixings when installing multiple downlights in a row. The GU10 base allows bulb changes without tools — twist the bulb out and replace when it fails, no rewiring needed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e2.9cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e8.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_C064CL-L12B3K.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating protects against water jets from any direction, making it suitable for bathroom zones 1 and 2, including above showers and near baths. Confirm zone requirements with a qualified electrician before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Stark accepts a single GU10 bulb up to 50W. Bulbs are sold separately. Most installations use a 5-7W GU10 LED bulb in 3000K or 4000K for general ambient lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimmer compatibility depends on the GU10 bulb you fit. The downlight housing itself does not restrict dimming — choose a dimmable GU10 bulb and pair it with a compatible GU10 LED dimmer switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat depth ceiling void is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting sits 29mm deep once installed. A minimum 40mm ceiling void depth is recommended to accommodate the bulb and allow airflow around the fitting for heat dissipation.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724737241355,"sku":"DL083-01-GU10-RD-B","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL083-01-GU10-RD-B_on_w_standard_bd266ec8-a2ec-4ac6-9ff6-ded205ec8597.jpg?v=1737122968"},{"product_id":"stark-fixed-square-recessed-downlight-black-ip65","title":"Stark Fixed Square Recessed Downlight - Black IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Stark is an 84mm square recessed downlight with a matt black aluminium frame and a fixed GU10 lamp holder. The square bezel sits flush with the ceiling once installed, with spring clips holding the fitting against the plasterboard or ceiling tile from behind. The IP65 rating protects the internal components against water jets and dust ingress, making this suitable for bathrooms, wet rooms and sheltered outdoor applications such as covered porches and eaves.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential bathrooms, commercial washrooms, hospitality corridors and retail environments where ceiling space allows recessed fittings, the Stark requires a minimum ceiling void of approximately 70mm to accommodate the lamp holder and GU10 bulb behind the bezel. The fixed orientation directs light straight downward, providing functional task lighting rather than adjustable accent lighting. The 84mm cut-out size fits standard downlight apertures in UK new-build construction.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish on the aluminium frame absorbs light rather than reflecting it, keeping the fitting visually recessive against dark or painted ceilings. The frame measures 84mm square on the visible face with a shallow 29mm projection into the ceiling void, suitable for installations where joist depth or suspended ceiling plenum space is limited. The fitting accepts any GU10 lamp up to 50W, giving control over colour temperature, beam angle and dimming capability depending on the chosen bulb.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e2.9cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e8.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e8.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_C034CL-01G.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating protects against water jets and steam, making the Stark suitable for bathroom zones 1 and 2 (outside the shower enclosure itself but within 60cm of a bath or basin). It cannot be installed inside a shower enclosure, which requires IP67 or higher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size hole is needed for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires an 84mm square cut-out in the ceiling. The visible bezel covers approximately 90mm square once installed, hiding the cut edges. A ceiling void of at least 70mm depth is needed to accommodate the GU10 bulb and lamp holder behind the plasterboard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. GU10 bulbs are sold separately. Most installations pair this with a 5-7W LED GU10 in 3000K or 4000K depending on whether warm or neutral white light is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the light direction adjustable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The Stark is a fixed downlight, meaning the lamp holder points straight down and cannot be tilted or rotated once installed. For directional or accent lighting, see the adjustable GU10 downlights in the Niori catalogue.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724737667339,"sku":"DL083-01-GU10-SQ-B","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL083-01-GU10-SQ-B_on_w_standard_546d4fa6-45b5-47c6-ac82-81bb0c565694.jpg?v=1737122967"},{"product_id":"zoom-12w-led-dimmable-recessed-downlight-3000k-ip65-black","title":"Zoom 12W LED Dimmable Recessed Downlight 3000K IP65 - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zoom is an 85mm recessed LED downlight with an integrated 12W LED module delivering 3000K warm white light at CRI 90. The black aluminium bezel and heat-sink housing carry an IP65 rating, making the fitting suitable for installation in bathroom zones, outdoor soffits, porches and other damp or dusty environments where dust ingress and water jets need to be excluded.\u003c\/p\u003e\n\u003cp\u003eDesigned for new-build or retrofit applications in residential and commercial settings, the Zoom fits a standard 85mm ceiling cut-out and recesses flush with the plasterboard or render line. The 12W output provides focused downward illumination suitable for spacing at 1.5-2m centres in hallways, bathrooms, kitchens and circulation areas. The dimmable driver works with trailing-edge dimmers, allowing light levels to be adjusted from full output down to approximately 10% without flicker.\u003c\/p\u003e\n\u003cp\u003eThe CRI 90 rating means the light reproduces colours more accurately than standard CRI 80 fittings, which is useful in bathrooms where skin tones and makeup need to be rendered faithfully, and in kitchens where food preparation benefits from true colour perception. The black aluminium construction dissipates heat efficiently through the finned rear heat-sink visible in the image, keeping LED junction temperatures within safe operating limits and supporting the 5-year warranty period.\u003c\/p\u003e\n\u003cp\u003eThe IP65 certification allows the Zoom to be installed in bathroom Zone 1 (directly above a bath or shower enclosure) and Zone 2 (within 600mm of a basin or shower tray), as well as outdoor locations under eaves or canopies where the fitting is protected from direct rainfall but exposed to moisture and dust. The recessed profile prevents the fitting from protruding into headroom, making it suitable for low ceilings and areas where ceiling height is limited.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e8.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e8.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003e3000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_C010CL-01B.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating allows installation in bathroom Zone 1 (directly above a bath or shower) and Zone 2 (within 600mm of a basin or shower). The fitting excludes water jets and dust ingress, making it safe for damp environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Zoom dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The integrated driver is compatible with trailing-edge dimmers and can be dimmed from full output down to approximately 10%. Confirm dimmer compatibility before installation to avoid flicker.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size ceiling cut-out is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires an 85mm diameter ceiling cut-out. Check the product manual for the exact cut-out dimension and the minimum ceiling void depth needed to accommodate the heat-sink and driver housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does CRI 90 mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCRI (Colour Rendering Index) measures how accurately a light source reproduces colours compared to natural daylight. CRI 90 means the Zoom renders colours more faithfully than standard CRI 80 fittings, which is useful in bathrooms and kitchens where true colour perception matters.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724740354315,"sku":"DL034-L12W3K-D-B","price":71.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL034-L12W3K-D-B_on_w_standard_6495960c-1aca-4f19-a4ff-cbb9e275c629.jpg?v=1737122961"},{"product_id":"zoom-led-dimmable-recessed-downlight-12w-3000k-ip65-white","title":"Zoom LED Dimmable Recessed Downlight 12W 3000K IP65 - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zoom is an 85mm LED recessed downlight with a white aluminium trim, integrated 12W LED module and IP65 dust and water protection. The fitting sits flush with the ceiling line, leaving only the white bezel and central reflector cone visible. A 90 CRI rating maintains accurate colour rendering across reds, blues and greens, making it suitable for task areas where colour perception matters.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation into plasterboard, concrete or timber ceilings with a minimum void depth of 85mm, the downlight fits bathrooms, kitchens, wet rooms, covered outdoor terraces and commercial corridors where moisture is present. The IP65 rating protects the LED driver and internal components from direct water jets and dust ingress. The dimmable function works with most leading-edge and trailing-edge dimmers, allowing light levels to be reduced from full 12W output down to approximately 10% for evening ambient lighting.\u003c\/p\u003e\n\u003cp\u003eThe 3000K colour temperature produces warm white light that sits between the yellow of traditional incandescent bulbs and the cooler white of commercial office lighting. The aluminium heatsink behind the visible trim dissipates LED heat into the ceiling void, maintaining the module's lifespan and preventing colour shift over time. Spring retention clips hold the fitting in place without visible screws on the ceiling face, and the white powder-coat finish on the trim resists yellowing under UV exposure.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e8.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e8.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003e3000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_C018CL-01B.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this downlight suitable for bathrooms and showers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating protects against direct water jets from any direction, making the Zoom suitable for bathroom zones 1 and 2 (outside the shower cubicle itself but within splash distance). It can also be used in covered outdoor areas where rain may blow in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 85mm void depth is needed above the ceiling line to accommodate the LED module and heatsink. The fitting sits flush with the ceiling surface once installed, with only the 85mm diameter bezel visible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat dimmer switches work with this downlight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Zoom works with most leading-edge and trailing-edge dimmers designed for LED loads. Check the dimmer manufacturer's LED compatibility list before pairing. Some older rotary dimmers designed for incandescent bulbs may cause flickering at low levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the 90 CRI rating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCRI (Colour Rendering Index) measures how accurately colours appear under artificial light compared to natural daylight. A CRI of 90 means the Zoom reproduces colours very accurately, making it suitable for kitchens, bathrooms and wardrobes where colour perception is important.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724740550923,"sku":"DL034-L12W3K-D-W","price":71.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL034-L12W3K-D-W_on_w_standard_cefe2077-4aa4-4f3c-8d4d-1787caa75f1f.jpg?v=1737122959"},{"product_id":"zoom-12w-led-dimmable-recessed-downlight-4000k-ip65-white","title":"Zoom 12W LED Dimmable Recessed Downlight 4000K IP65 - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zoom is an 85mm recessed LED downlight with an integrated 12W LED module producing 4000K cool white light at CRI90. The white aluminium bezel and trim ring fit a recessed ceiling cut-out, with the LED driver and heatsink assembly mounted above the ceiling line. The IP65 rating protects against water jets and dust ingress, making the fitting suitable for bathrooms, shower rooms, outdoor soffits and covered entrances where moisture is present.\u003c\/p\u003e\n\u003cp\u003eDesigned for task lighting and general illumination in residential, commercial and hospitality installations, the 4000K colour temperature provides neutral white light that enhances colour accuracy in kitchens, bathrooms, retail displays and workspaces. The 12W output delivers approximately 960-1000 lumens depending on driver efficiency, which is comparable to a 75-80W halogen downlight. The dimmable capability works with compatible trailing-edge and leading-edge dimmers, allowing output to be reduced for mood lighting or energy saving.\u003c\/p\u003e\n\u003cp\u003eThe aluminium construction includes external heatsink fins visible above the ceiling line, which dissipate heat away from the LED module and extend operational life. The white powder-coated bezel sits flush with the ceiling surface once installed, giving a clean finish that blends with white and light-toned ceilings. The CRI90 rating means the light renders colours accurately, which is useful in bathrooms for grooming tasks, in kitchens for food preparation, and in retail or display contexts where colour fidelity matters.\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating means the downlight can be installed in bathroom zones 1 and 2 (within the bath or shower enclosure and directly above the bath or shower to a height of 2.25m), as well as outdoor covered locations such as porch soffits, car ports and canopies where the fitting is protected from direct rainfall but exposed to damp air. The fitting requires a ceiling void depth of approximately 100mm to accommodate the driver and heatsink assembly.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e8.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e8.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003e4000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_C017CW-01MG.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be installed in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating makes the Zoom suitable for bathroom zones 1 and 2, which includes installation within or directly above a bath or shower enclosure up to 2.25m height.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eApproximately 100mm of ceiling void depth is required to accommodate the LED driver, heatsink assembly and wiring connections above the ceiling line. The 85mm bezel diameter requires an 80mm ceiling cut-out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Zoom is dimmable and works with most trailing-edge and leading-edge dimmers designed for LED loads. Performance varies depending on the dimmer model — consult the dimmer manufacturer's compatibility list or test before finalising installation across multiple fittings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between 3000K and 4000K?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e4000K produces a neutral cool white light similar to daylight, which enhances task visibility and colour accuracy. 3000K produces a warmer, more yellow-toned light closer to traditional halogen. For bathrooms, kitchens and workspaces, 4000K is typically preferred. For living rooms and bedrooms, 3000K is more common.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724760932619,"sku":"DL034-L12W4K-D-W","price":71.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL034-L12W4K-D-W_on_w_standard_593bf0db-3fb5-4152-8121-afb8cc814b77.jpg?v=1737122956"},{"product_id":"zoom-12w-led-recessed-downlight-4000k-ip65-white","title":"Zoom 12W LED Recessed Downlight 4000K IP65 - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zoom is an 85mm recessed LED downlight with a 12W integrated LED producing 4000K neutral white light at a CRI of 90. The cast aluminium housing is finished in white and rated IP65 against dust and water ingress, making it suitable for bathrooms, outdoor soffits, kitchens and commercial spaces where moisture resistance is required.\u003c\/p\u003e\n\u003cp\u003eDesigned for recessed installation into ceilings with a minimum void depth of 85mm, the Zoom provides direct downward illumination for general lighting, task lighting over worktops, or accent lighting in retail and hospitality settings. The 4000K colour temperature sits between warm and cool white, providing neutral clarity that works across residential and commercial applications without skewing warm or cold. The IP65 rating allows the fitting to be installed in bathroom zones 1 and 2, and under outdoor soffits or covered porches.\u003c\/p\u003e\n\u003cp\u003eThe 85mm diameter cut-out gives a discreet ceiling aperture that suits contemporary interiors where visible fittings are minimised. The white powder-coated finish on the visible bezel blends into white or light-coloured ceilings, while the cast aluminium construction provides heat dissipation for the LED driver. The CRI 90 rating ensures accurate colour rendering for spaces where colour differentiation matters, such as kitchens, bathrooms with mirror lighting, or retail displays.\u003c\/p\u003e\n\u003cp\u003eThe fitting draws 12W on AC 220-240V mains and is designed for continuous operation without dimming capability. The integrated LED has a rated lifespan of 30,000+ hours at typical domestic usage patterns, reducing the need for lamp replacement over the fitting's service life.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e8.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e8.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003e4000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_TR002-1-GU10-W.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating makes it suitable for bathroom zones 1 and 2 (within 2.25m of a bath or shower, above the bath\/shower). It is not rated for submersion or direct water jets, but will withstand bathroom moisture and splashing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Zoom dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The integrated LED driver is designed for fixed output on AC 220-240V mains. It will not work with dimmer switches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires a minimum 85mm void depth above the ceiling for the driver and heat sink. The 85mm diameter cut-out sits flush with the ceiling surface once installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, under cover. The IP65 rating protects against rain and dust when installed under soffits, porches or covered walkways. It is not rated for fully exposed outdoor use in direct rain or snow.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724763914507,"sku":"DL034-L12W4K-W","price":48.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL034-L12W4K-W_on_w_standard_677bde5c-e388-4393-bd30-062f0e2780c5.jpg?v=1737122955"},{"product_id":"zoom-led-round-recessed-downlight-6w-3000k-black","title":"Zoom LED Round Recessed Downlight 6W 3000K - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zoom is a 60mm recessed LED downlight with an integrated 6W module running at 3000K colour temperature, housed in a black cast aluminium body rated to IP65. The downlight sits flush with the ceiling once installed, with a black baffle aperture that recesses the LED source and reduces glare. The 90 CRI rating renders colours accurately under the warm white light.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, kitchens, hallways and sheltered outdoor areas where moisture protection is required, the IP65 rating allows the fitting to be installed in zones where water spray or steam is present. The 60mm cutout and 60mm installation depth fit standard ceiling voids and plasterboard thicknesses found in UK residential construction. The recessed mounting hides all wiring and driver components above the ceiling line, leaving only the black aperture visible.\u003c\/p\u003e\n\u003cp\u003eThe cast aluminium construction provides structural rigidity and heat dissipation for the LED module without adding excessive weight to ceiling fixings. The black powder-coated finish absorbs rather than reflects ceiling light, keeping the fitting visually recessive in white or light-coloured ceilings. The fixed downlight orientation directs light vertically downward, making it suitable for general task lighting over washbasins, kitchen worktops, or walkways rather than accent or feature lighting.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003e3000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_C062CL-L12W4K.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the IP65 rating mean for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 means the downlight is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for bathroom zones 1 and 2 (outside the shower enclosure but within the room), outdoor covered areas like porches, and kitchens where steam or splashes occur. It cannot be installed inside a shower enclosure or directly exposed to heavy rain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cutout size is needed in the ceiling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight requires a 60mm diameter cutout and a minimum 60mm depth above the ceiling surface for the housing and driver. The aperture sits flush with the finished ceiling once installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the LED replaceable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The LED module is integrated into the downlight housing and is not user-replaceable. The 6W LED is rated for approximately 25,000-30,000 hours of operation, which translates to around 10-15 years at typical residential usage levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple Zoom downlights be installed on the same circuit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided the circuit is rated to handle the combined wattage. Each downlight draws 6W, so a typical 6A lighting circuit can support around 200 units in theory, though practical installations typically use far fewer. Consult a qualified electrician for multi-unit installations.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724764438795,"sku":"DL034-01-06W3K-B","price":44.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL034-01-06W3K-B_on_w_standard_18f18527-e9a4-4003-a81e-38a77ead2a51.jpg?v=1737122953"},{"product_id":"zoom-6w-led-dimmable-recessed-downlight-3000k-ip65-black","title":"Zoom 6W LED Dimmable Recessed Downlight 3000K IP65 - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zoom is a 60mm diameter recessed LED downlight with an integrated 6W LED module, IP65 rating and dimmable function. The black aluminium housing features a deep-recessed cone that reduces glare and gives a directional 3000K warm-white output through a clear lens. The IP65 ingress protection seals the fitting against dust and water jets, making it suitable for bathroom zones 1 and 2, shower enclosures and kitchen splashback areas.\u003c\/p\u003e\n\u003cp\u003eDesigned for ceiling recess installation in new builds and refits, the Zoom requires a 68-72mm ceiling cut-out and approximately 70mm ceiling void depth above the plasterboard. Spring-loaded retention clips hold the fitting flush to the ceiling once installed. The integrated driver runs on 220-240V AC mains with no external transformer required. Dimmer compatibility depends on the specific dimmer model — see FAQ below for guidance.\u003c\/p\u003e\n\u003cp\u003eThe 6W LED produces approximately 500-550 lumens at 3000K colour temperature with a CRI90 rating, providing accurate colour rendering for task areas including vanity mirrors, kitchen worktops and reading corners. The black powder-coated finish minimises visual presence when the fitting is switched off, allowing the downlight to blend into dark ceiling planes in contemporary interiors. Maytoni backs the LED module and driver with a 5-year guarantee.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003e3000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_C062CL-L12W3K.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Zoom compatible with dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LED driver is rated as dimmable, but compatibility depends on the specific dimmer model. Leading-edge and trailing-edge dimmers behave differently with integrated LED downlights. Please contact us with your dimmer model before installation to confirm compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling cut-out size is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Zoom requires a 68-72mm diameter ceiling cut-out and approximately 70mm ceiling void depth above the plasterboard to accommodate the driver and heat sink. The fitting installs using spring-loaded retention clips that sit behind the plasterboard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms and wet areas?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating provides protection against water jets and dust ingress, making the Zoom suitable for bathroom zones 1 and 2, shower enclosures, and kitchen areas near sinks and hobs. It is not rated for direct submersion or outdoor use in exposed positions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the light output and beam angle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 6W LED produces approximately 500-550 lumens at 3000K warm white with a CRI90 rating. The deep-recessed cone design creates a narrower beam angle than flat-faced downlights, making it suited to task lighting rather than general ambient wash.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724764963083,"sku":"DL034-01-06W3K-D-B","price":66.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL034-01-06W3K-D-B_on_w_standard_dc59da96-cc5c-4141-a5c0-67b8649b3c34.jpg?v=1737122952"},{"product_id":"zoom-led-dimmable-round-recessed-downlight-6w-3000k-white","title":"Zoom LED Dimmable Round Recessed Downlight 6W 3000K - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zoom is a 60mm diameter recessed LED downlight with an integrated 6W LED module producing 3000K warm white light. The fitting is built from die-cast aluminium with a white powder-coated finish and carries an IP65 rating, making it fully protected against dust ingress and resistant to water jets from any direction.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, kitchens, outdoor soffits and any zone requiring moisture protection, the Zoom fits a 60mm ceiling cutout with a 60mm overall depth above the ceiling line. The IP65 rating allows installation in bathroom zones 1 and 2, as well as covered outdoor areas where direct rainfall does not occur. The integrated LED delivers 90 CRI colour rendering, reproducing skin tones and material colours more accurately than typical 80 CRI commercial downlights.\u003c\/p\u003e\n\u003cp\u003eThe fitting is dimmable when paired with a compatible LED dimmer (check dimmer compatibility with Maytoni or the dimmer manufacturer before installation). The white finish sits flush with the ceiling plane once installed, leaving only the central 30mm aperture and frosted diffuser visible from below. The aluminium construction dissipates heat through the black heatsink fins mounted on the top of the housing, maintaining LED longevity even in enclosed ceiling voids.\u003c\/p\u003e\n\u003cp\u003eThe Zoom is supplied with spring clips for tool-free installation into plasterboard ceilings with 60mm ceiling depth clearance. A separate driver is required and is typically mounted in the ceiling void or loft space during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003e3000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_C063CL-L12W3K.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating allows installation in bathroom zones 1 and 2, which includes areas directly above a bath or shower enclosure. The fitting is fully protected against moisture and steam. Ensure the electrical installation complies with Part P Building Regulations and is carried out by a qualified electrician.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires a 60mm ceiling cutout diameter and 60mm clearance above the ceiling line to accommodate the housing and heatsink. The spring clips allow tool-free installation into plasterboard ceilings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the LED replaceable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The LED module is integrated into the housing and is not user-replaceable. The LED is rated for approximately 25,000-30,000 hours of operation, which equates to around 10-15 years of typical residential use before noticeable light degradation occurs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a driver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. A separate LED driver is required and is typically mounted in the ceiling void or loft space during installation. The driver must match the voltage and wattage requirements shown in the Specification table above.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724765159691,"sku":"DL034-01-06W3K-D-W","price":66.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL034-01-06W3K-D-W_on_w_standard_ea8b8033-fec8-4f2b-be20-8cad2c28d1c6.jpg?v=1737122951"},{"product_id":"zoom-led-round-recessed-downlight-6w-3000k-white","title":"Zoom LED Round Recessed Downlight 6W 3000K - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zoom is a 60mm round recessed LED downlight with a 6W integrated LED module producing 3000K warm white light at CRI 90. The white powder-coated aluminium body sits flush to the ceiling surface when recessed into a 60mm ceiling void, with spring clips holding the unit against the plasterboard or timber substrate.\u003c\/p\u003e\n\u003cp\u003eRated IP65, the Zoom is sealed against dust ingress and low-pressure water jets, making it suitable for bathroom zones 1 and 2, shower rooms, outdoor soffits under eaves, and kitchen splashback areas where steam and moisture are present. The CRI 90 rating ensures that colours under this light appear accurate and natural, which matters in bathrooms where makeup is applied and in kitchens where food is prepared.\u003c\/p\u003e\n\u003cp\u003eThe 60mm diameter and 60mm depth allow the Zoom to fit into standard UK residential ceiling voids without needing additional joist clearance. The aluminium construction dissipates heat through a ribbed black heatsink on the rear, keeping the LED junction temperature within operating limits and extending the diode lifespan. The white finish on the front bezel blends into white ceilings, leaving only the light aperture visible once installed.\u003c\/p\u003e\n\u003cp\u003eOperating on 220-240V AC mains, the Zoom requires no external driver or transformer — the LED driver is integrated into the rear housing. The 6W output suits accent lighting, task lighting over sinks and worktops, and low-level ambient lighting in hallways, WCs and utility rooms where full-brightness downlights would be excessive.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003e3000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_C089CL-12W3K-B.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating provides full protection against water jets and dust, making it suitable for bathroom zones 1 and 2. This includes positions directly above a bath or inside a shower enclosure, provided it is installed to Part P Building Regulations standards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Zoom requires a minimum 60mm ceiling void depth to accommodate the rear housing and integrated driver. The ribbed black heatsink extends approximately 50mm above the ceiling line once recessed, so ensure joists or ceiling structure allow this clearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMaytoni integrated LED downlights are not typically dimmable unless explicitly stated. The Zoom operates at fixed 6W output on 220-240V mains. For dimming capability, check with Niori before purchase or consider a different model in the Maytoni range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the downlight fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Zoom uses spring clips that compress when the unit is pushed into a 60mm cut-out in the ceiling, then expand behind the plasterboard or substrate to hold the downlight in place. Mains connection is made via a terminal block on the rear housing before the unit is clipped into position.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724765651211,"sku":"DL034-01-06W3K-W","price":44.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL034-01-06W3K-W_on_w_standard_32b64131-ae92-4942-bfe1-17db699536b5.jpg?v=1737122950"},{"product_id":"zoom-led-dimmable-round-recessed-downlight-6w-4000k-black","title":"Zoom LED Dimmable Round Recessed Downlight 6W 4000K - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zoom is a 60mm diameter LED recessed downlight with an integrated 6W LED module delivering 4000K cool white light at CRI 90. Cast aluminium construction with a matte black powder-coated finish houses a deep-set anti-glare lens that directs light downward while minimising direct sightlines to the LED chip. The IP65 rating provides full dust-sealing and protection against low-pressure water jets, making the Zoom suitable for bathroom zones, shower cubicles, covered outdoor soffits and kitchen worktop areas.\u003c\/p\u003e\n\u003cp\u003eDesigned for recessed installation into ceiling voids with minimum 60mm clearance above the plasterboard, the Zoom uses spring retention clips to hold the fitting flush against the ceiling surface once the cut-out is made. The 4000K colour temperature produces a neutral white light that sits between warm ambient lighting and daylight-equivalent task lighting, making it suitable for bathroom mirrors, kitchen prep areas, laundry rooms and utility spaces where accurate colour perception matters. The CRI 90 rating ensures skin tones, food and textiles appear as they would under natural daylight.\u003c\/p\u003e\n\u003cp\u003eThe black powder-coated finish provides a contemporary contrast against white or light-toned ceilings and pairs well with matt black tapware, cabinet handles and door furniture in modern interiors. The 60mm height and diameter keep the visible aperture minimal, so multiple Zoom downlights can be installed at 800-1200mm centres without dominating the ceiling plane. Dimming compatibility depends on the specific LED dimmer module used — confirm compatibility with your chosen dimmer before pairing to avoid flicker or limited range.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003e4000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_C010CL-01W.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathroom shower zones?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating provides full protection against moisture ingress from shower spray and steam. Check local building regulations for specific zone requirements, but IP65 is generally acceptable for zones 1 and 2 in UK bathrooms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 60mm clearance above the plasterboard is required to accommodate the downlight body and heatsink. The fitting is held in place by spring clips that grip the back of the ceiling surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integrated LED is rated as dimmable, but performance depends on the specific dimmer module used. Trailing-edge LED dimmers typically provide smoother dimming with less flicker than leading-edge models. Confirm compatibility with your chosen dimmer before installation to avoid reduced dimming range or audible buzzing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the lumen output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLumen output is not specified in the provided data. Contact us for the exact lumen rating if you need to calculate lux levels for a specific application.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724766503179,"sku":"DL034-01-06W4K-D-B","price":66.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL034-01-06W4K-D-B_on_w_standard_14bdd52a-6c82-4f0a-8e6d-207ca2e529f4.jpg?v=1737122947"},{"product_id":"zoom-6w-led-recessed-downlight-4000k-ip65-white","title":"Zoom 6W LED Recessed Downlight 4000K IP65 - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zoom is a 60mm diameter recessed LED downlight with a white powder-coated cast aluminium body, an integrated 6W LED module rated at 4000K neutral white, and an IP65 rating for moisture and dust protection. The fitting sits flush with the ceiling once installed, creating a clean circular aperture with no visible bezel projection beyond the white trim ring.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, shower rooms, utility areas and commercial spaces where moisture protection is required, the IP65 rating makes the Zoom suitable for zones 1 and 2 in UK bathroom installations. The 4000K colour temperature provides neutral white light that renders colours accurately without the warm yellow cast of 3000K or the clinical blue tone of 6000K, making it practical for task lighting in kitchens, bathrooms and work areas. The 60mm diameter and 60mm recess depth fit standard ceiling void depths in UK residential and light commercial construction.\u003c\/p\u003e\n\u003cp\u003eThe cast aluminium construction dissipates heat from the 6W LED module through cooling fins moulded into the rear housing, visible in the product image. The CRI90 rating means colours appear close to how they would under natural daylight, which matters in rooms where makeup is applied, colours are matched or detailed tasks are performed. The white powder-coat finish on the trim ring blends with white or off-white ceilings, while the recessed installation keeps the fitting visually discreet.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003e4000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_C010CL-01CH.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom shower enclosure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating provides protection against water jets from any direction, making it suitable for zones 1 and 2 in UK bathroom installations. This includes areas directly above showers and baths. Ensure the fitting is installed by a qualified electrician in accordance with current wiring regulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is 60mm deep from the ceiling surface to the top of the rear housing. A minimum void depth of 70mm is recommended to allow clearance for the driver and heat dissipation from the cooling fins. Most UK residential ceilings provide adequate depth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the LED replaceable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The LED module is integrated into the fitting and is not user-replaceable. The LED is rated for approximately 25,000 hours of operation, equivalent to around 17 years at 4 hours per day, and is covered by Maytoni's 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the light output in lumens?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMaytoni does not specify the lumen output for the Zoom 6W model in the available documentation. As a reference point, most 6W LED downlights with 4000K colour temperature deliver between 400-550 lumens, but contact us if you need to confirm the exact output for lighting calculations.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724766896395,"sku":"DL034-01-06W4K-W","price":44.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL034-01-06W4K-W_on_w_standard_f54521f7-64de-4529-a09b-6b75f41555f5.jpg?v=1737122944"},{"product_id":"zoom-square-recessed-downlight-gu10-black-ip65","title":"Zoom Square Recessed Downlight GU10 - Black IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zoom is an 85mm square recessed downlight with a GU10 bulb fitting, housed in a black cast aluminium body rated IP65 against dust and water ingress. The square aperture measures 85 x 85mm with a 45mm installation depth, and the fixed orientation directs light straight down from the ceiling plane.\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating makes the Zoom suitable for Zone 2 bathroom installation (outside the immediate shower or bath enclosure), kitchen ceiling positions near sinks and hobs, covered outdoor soffits, and commercial spaces where ceiling fittings need dust and moisture protection. The GU10 fitting accepts any standard GU10 LED, halogen or CFL bulb up to 50W (sold separately), giving control over beam angle, colour temperature and dimmer compatibility depending on the chosen bulb.\u003c\/p\u003e\n\u003cp\u003eThe black powder-coated aluminium body sits flush with the ceiling once installed, with spring clips holding the fitting securely in the ceiling void. The square aperture provides a geometric alternative to circular downlights in contemporary interiors, and the matt black finish reduces visible glare when viewed at an angle. The cast aluminium construction dissipates heat effectively, extending bulb life when paired with LED lamps.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e8.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e8.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_TR008-1-GU10-W.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP65 mean for bathroom use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 provides full protection against dust and low-pressure water jets from any direction. This rating is suitable for Zone 2 bathroom installation (outside the immediate shower or bath enclosure, typically 60cm away from water sources). It is not rated for direct shower spray (which requires IP67).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size hole is needed for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cutout required is slightly smaller than the 85mm visible aperture to allow the bezel to sit flush. Refer to the product manual linked above for the exact cutout dimension, typically around 75-78mm square.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimmer compatibility depends on the GU10 bulb you fit. The downlight housing itself does not restrict dimming. Use a dimmable GU10 LED bulb paired with a compatible LED dimmer switch for dimming functionality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the IP65 rating allows outdoor use in covered positions such as porch ceilings, garage soffits, or canopy areas where the fitting is protected from direct rainfall. It should not be installed in fully exposed positions.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724767486219,"sku":"DL033-2-01B","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL033-2-01B_on_w_standard_c9d4fe21-1f52-4c25-93ff-36bd6382beab.jpg?v=1737122943"},{"product_id":"zoom-twin-fixed-rectangular-recessed-downlight-black","title":"Zoom Twin Fixed Rectangular Recessed Downlight - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zoom is a twin rectangular recessed downlight with two fixed GU10 fittings set into a matt black cast aluminium frame. The rectangular bezel measures 170mm × 90mm with a 36mm recess depth, and each of the two light apertures houses a separate GU10 socket rated up to 50W. The IP65 rating protects against dust ingress and low-pressure water jets, making the fitting suitable for bathrooms, shower rooms and covered outdoor areas.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation into plasterboard ceilings or timber joists where a dual-source downlight is needed, the Zoom provides two independently controllable light points within a single cutout. This suits kitchen worktop task lighting, bathroom mirror zones, hallway runs and retail display lighting where higher lumen output or directional flexibility is needed compared to a single-source downlight. The fixed apertures point directly downward with no tilt adjustment, delivering a consistent wash of light beneath the fitting.\u003c\/p\u003e\n\u003cp\u003eThe cast aluminium construction disperses heat efficiently across the rectangular frame, allowing the fitting to run two 50W halogen GU10s without overheating (though most installations now pair it with LED GU10s at 5-7W each for lower running costs). The matt black finish is powder-coated rather than painted, resisting chips and wear in high-traffic areas. The rectangular form factor integrates cleanly into linear ceiling layouts and pairs well with other rectilinear architectural details.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e3.6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e17cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e9cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_C012CL-01B.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating protects against water jets and steam, making it suitable for bathroom zones 1 and 2 (outside the shower enclosure itself). It must be installed by a qualified electrician following current UK wiring regulations for bathroom lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Zoom takes two standard GU10 bulbs, each rated up to 50W maximum. Most users fit LED GU10s at 5-7W and 3000K for lower energy consumption and longer bulb life. Bulbs are sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cutout size is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe rectangular bezel measures 170mm × 90mm. The exact cutout dimensions and recess depth requirements are detailed in the installation manual linked in the Downloads tab above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the light direction be adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The Zoom is a fixed downlight — both GU10 apertures point directly downward with no tilt or rotation adjustment. For adjustable twin downlights, see the tilting variants in the Maytoni Zoom range.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724768174347,"sku":"DL033-2-02B","price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL033-2-02B_on_w_standard_c13b19b4-ed6f-49ca-96f3-38546e44a38f.jpg?v=1737122942"},{"product_id":"zoom-fixed-round-recessed-downlight-ip65-white","title":"Zoom Fixed Round Recessed Downlight IP65 - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zoom is an 85mm fixed round recessed downlight in white powder-coated cast aluminium, carrying an IP65 rating for full dust protection and water jet resistance. The fitting accepts a single GU10 bulb up to 50W (sold separately) and is designed for flush ceiling installation where the lamp sits completely recessed within the ceiling void, leaving only the white bezel and lens visible from below.\u003c\/p\u003e\n\u003cp\u003eThe IP65 certification makes the Zoom suitable for bathroom zones 1 and 2, kitchen splashback areas, covered outdoor soffits and other locations where moisture or dust ingress would damage a standard downlight. The fixed round design provides directional illumination straight down, making it effective for task lighting over worktops, sinks, vanity units and paths, or as general ambient lighting when installed in a grid layout across a ceiling.\u003c\/p\u003e\n\u003cp\u003eThe cast aluminium body provides thermal management for GU10 halogen or LED bulbs, dissipating heat through the ceiling void to maintain bulb life and prevent overheating. The white powder coat is applied over the entire visible bezel, allowing the fitting to blend into white or light-coloured ceilings without creating a visual break in the surface plane. The recessed installation requires a ceiling void depth of at least 50mm to accommodate the fitting body behind the plasterboard.\u003c\/p\u003e\n\u003cp\u003eThe Zoom operates on 220-240V AC mains and requires a suitable driver or transformer if using low-voltage GU10 LEDs. The fitting is supplied with spring clips for tool-free installation into a pre-cut 85mm ceiling aperture, and the GU10 socket accepts twist-lock bulbs for quick replacement without needing to remove the entire fitting from the ceiling.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e8.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_TR008-1-GU10-B.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP65 mean and where can this be installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 means the fitting is fully dust-sealed (IP6X) and protected against water jets from any direction (IPX5). This makes it suitable for bathroom zones 1 and 2, kitchen areas near sinks and hobs, and covered outdoor locations like soffits and porches where rain may be driven against the fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting body projects 45mm above the ceiling line, so a minimum void depth of 50mm is needed for safe installation with clearance around the fitting. The 85mm diameter aperture must be cut into the plasterboard before the fitting is clipped into place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb should I use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting accepts any GU10 bulb up to 50W. Most users fit a 5-7W GU10 LED in warm white (2700K-3000K) for general lighting, or a higher-output 10W LED for task lighting over worktops. Bulbs are sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the light direction adjustable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The Zoom is a fixed downlight, meaning the bulb points straight down and cannot be tilted or rotated once installed. For adjustable directional lighting, see the tiltable or gimbal downlight models in the Maytoni range.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724768600331,"sku":"DL032-2-01W","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL032-2-01W_on_w_standard_3649565c-1071-4050-b097-dcbb0aa5ece4.jpg?v=1737122941"},{"product_id":"zoom-twin-fixed-rectangular-recessed-downlight-white","title":"Zoom Twin Fixed Rectangular Recessed Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zoom is a twin fixed rectangular recessed downlight with a white cast aluminium housing measuring 170mm x 90mm x 36mm deep. Two GU10 lamp holders are set into recessed bezels behind a white trim plate, each accepting bulbs up to 50W on 220-240V mains (bulbs sold separately). The IP65 rating seals the fitting against dust and water jets, making it suitable for bathroom zones 1 and 2, covered outdoor soffits, and high-humidity kitchen environments.\u003c\/p\u003e\n\u003cp\u003eDesigned for recessed ceiling installation, the Zoom requires a cut-out of approximately 160mm x 80mm and a void depth of at least 50mm above the ceiling to accommodate the housing and spring clips. The twin-bulb configuration delivers higher lumen output than single downlights, making it useful for task lighting over kitchen worktops, vanity units, or for general ambient coverage in hallways and utility rooms where ceiling height is limited. The fixed bezels cannot be tilted or rotated once installed.\u003c\/p\u003e\n\u003cp\u003eThe white powder-coated aluminium finish matches common white ceilings and blends with light-painted interiors, while the cast aluminium construction provides corrosion resistance in damp environments. The rectangular form factor allows two downlights to be positioned closer together on a single joist run without overlapping cut-outs, and the low 36mm height means the fitting works in shallow ceiling voids where deeper round downlights would not fit.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e3.6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e17cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e9cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_C012CL-01W.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating makes the Zoom suitable for bathroom zones 1 and 2, provided the GU10 bulbs themselves are rated for enclosed fixtures. For zone 0 (inside the bath or shower tray), IP67 or higher is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes two GU10 bulbs up to 50W each. GU10 bulbs are sold separately. Most users fit LED GU10s between 4-7W and 3000K-4000K for general lighting, or higher wattage halogen GU10s where brighter task lighting is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe housing is 36mm tall, so a minimum void depth of 50mm above the ceiling is recommended to allow clearance for the spring clips and wiring. Shallower voids may require the joists to be notched.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezels be angled or rotated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a fixed downlight — the two bezels point straight down and cannot be tilted or rotated once installed. For directional lighting, see the adjustable versions in the Maytoni Zoom range.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45724768895243,"sku":"DL033-2-02W","price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL033-2-02W_on_w_standard_604086eb-a3d2-4456-a859-ddc69b1ee0b9.jpg?v=1737122939"},{"product_id":"stark-fixed-round-recessed-downlight-ip65-white","title":"Stark Fixed Round Recessed Downlight IP65 - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Stark is an 84mm fixed round recessed downlight with an IP65-rated white aluminium trim and a GU10 bulb holder. The fitting sits 29mm deep once installed into a ceiling void, with the white bezel sitting flush against the ceiling surface. The IP65 rating protects the internal components from dust ingress and water jets from any direction, making the fitting suitable for bathrooms, shower rooms, covered outdoor soffits, and commercial washrooms where moisture resistance is required.\u003c\/p\u003e\n\u003cp\u003eDesigned for fixed-beam task and accent lighting, the Stark works in low-ceiling spaces where adjustable downlights would protrude too far, and in exterior soffits where the fitting needs to withstand rain exposure from underneath. The GU10 bulb fitting accepts standard UK mains-voltage LED, halogen or CFL bulbs up to 50W (sold separately), giving control over colour temperature and beam angle depending on the chosen bulb. Most users pair this with a 5-7W GU10 LED in 3000K or 4000K for bathroom or kitchen task lighting.\u003c\/p\u003e\n\u003cp\u003eThe white powder-coated aluminium trim provides corrosion resistance in damp environments and blends into white or light-coloured ceilings without visual contrast. The round bezel measures 84mm outer diameter, requiring a ceiling cut-out of approximately 68mm, and the fitting weighs under 100g once the bulb is removed. Spring clips on either side of the housing hold the downlight securely in plasterboard or timber ceilings between 10-25mm thick without additional fixings.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e2.9cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e8.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_C034CL-01B.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom shower area?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating protects against water jets from any direction, making the Stark suitable for installation directly above showers and baths in Zone 1 and Zone 2 of UK bathroom regulations. Pair with a suitable GU10 LED bulb and ensure all electrical work is completed by a qualified electrician.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes a standard GU10 mains-voltage bulb up to 50W maximum. Bulbs are sold separately. Most users choose a 5-7W GU10 LED in 3000K for warm white or 4000K for neutral white task lighting in bathrooms and kitchens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling cut-out size is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe outer bezel measures 84mm diameter and requires a ceiling cut-out of approximately 68mm. The fitting sits 29mm deep into the ceiling void once installed, so a minimum void depth of 40mm is recommended to allow for the bulb length and wiring space.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the beam direction adjustable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The Stark is a fixed downlight, meaning the beam direction is locked vertically downwards. For adjustable beam direction, see the tiltable downlight models in the Maytoni range at Niori.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45728657670411,"sku":"DL083-01-GU10-RD-W","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL083-01-GU10-RD-W_on_w_standard__1_25d57d04-d7e0-4ebb-b7d7-607cb2b937a2.jpg?v=1737121901"},{"product_id":"stark-fixed-square-recessed-downlight-ip65-white","title":"Stark Fixed Square Recessed Downlight IP65 - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Stark is an 84mm square recessed downlight with a white aluminium frame and an IP65 rating, making it suitable for bathrooms, wet rooms and outdoor soffits. The fitting takes a single GU10 bulb (sold separately) up to 50W and sits flush to the ceiling surface once installed, with a minimal 29mm installation depth.\u003c\/p\u003e\n\u003cp\u003eDesigned for both residential and commercial installation, the Stark suits bathrooms requiring waterproof fittings within zones 1 and 2, kitchens needing moisture-resistant task lighting over sinks and worktops, and covered outdoor areas such as porches and covered terraces. The fixed downlight direction means the beam cannot be adjusted after installation, so positioning is chosen during fitting to direct light where needed. The 84mm aperture cuts cleanly into plasterboard ceilings and requires adequate clearance above the ceiling void for the lamp holder and bulb depth.\u003c\/p\u003e\n\u003cp\u003eThe white powder-coated aluminium finish resists moisture and provides a neutral backdrop that pairs with most ceiling finishes. The IP65 rating certifies the fitting against dust ingress and low-pressure water jets from any direction, meeting Building Regulations Part M requirements for bathroom lighting when installed in appropriate zones. The GU10 base accepts both halogen and LED GU10 lamps, allowing brightness and colour temperature to be chosen based on room function and preference.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e2.9cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e8.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e8.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_C048CL-U-1WMG.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating protects the fitting against moisture and allows it to be installed in bathroom zones 1 and 2, which include areas above and around the bath and shower. Zone 0 (inside the bath or shower tray itself) requires IP67 or higher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Stark takes a single GU10 bulb up to 50W. Bulbs are sold separately. Most users pair this with a 5-7W LED GU10 in either warm white (2700-3000K) for bathrooms and living areas, or cool white (4000K) for task lighting in kitchens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting protrudes 29mm above the ceiling surface once installed. You will also need clearance for the GU10 bulb depth, which is typically 50-60mm depending on the specific lamp chosen. Total void depth required is approximately 80-90mm from the ceiling surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the beam direction adjustable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The Stark is a fixed downlight, so the beam direction cannot be changed after installation. Positioning is determined during fitting based on where the light needs to fall.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45728658194699,"sku":"DL083-01-GU10-SQ-W","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL083-01-GU10-SQ-W_on_w_standard__1_193108a4-46c3-4885-a28f-bb7084e0de5c.jpg?v=1737121900"},{"product_id":"zoom-fixed-round-recessed-downlight-black-ip65-gu10","title":"Zoom Fixed Round Recessed Downlight - Black IP65 GU10","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zoom is an 85mm fixed recessed downlight with a black aluminium body, IP65 dust and moisture protection, and a single GU10 bulb fitting rated up to 50W. The recessed fitting sits flush with the ceiling, projecting just 45mm into the ceiling void, and the fixed head directs light straight down without tilt or rotation.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, kitchens, sheltered porches, and commercial interiors where moisture and dust resistance are required, the IP65 rating means the fitting is fully protected against dust ingress and can withstand water jets from any direction. This makes it suitable for use within bathroom zones 1 and 2, and in exterior locations under eaves or canopies where direct rain does not reach the fitting. The die-cast aluminium body adds mechanical strength without excessive weight, and the black powder-coat finish resists corrosion in damp environments.\u003c\/p\u003e\n\u003cp\u003eThe fixed 85mm aperture and GU10 base accommodate both halogen and LED GU10 bulbs, giving control over beam angle, colour temperature and brightness depending on the chosen lamp. A narrow-beam LED will create accent lighting, while a wide flood beam provides general area coverage. The black finish inside the aperture minimises glare and defines the circular cutout when the light is off, pairing cleanly with matt black, industrial and contemporary interiors.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e8.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_TR002-1-GU10-B.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating makes the Zoom suitable for bathroom zones 1 and 2, which include areas directly above the bath or shower tray and within 60cm of the bath or basin. Zone 0 (inside the bath or shower itself) requires IP67 or higher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes a standard GU10 bulb up to 50W. Bulbs are sold separately. Most users choose LED GU10 lamps between 4-7W, which give equivalent light output to a 35-50W halogen while consuming far less electricity and producing less heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating protects against dust and water jets, so the fitting can be used in sheltered outdoor locations such as under eaves, covered porches, or canopies where it is not exposed to direct rain. It should not be used in fully exposed locations where rainwater can pool around the fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting projects 45mm into the ceiling void. Add clearance for the GU10 bulb (approximately 50-55mm depending on the specific lamp) and wiring space, so a minimum 120mm void depth is recommended for safe installation.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45728675725579,"sku":"DL032-2-01B","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL032-2-01B_on_w_standard_fdb22619-6774-4eea-bd38-d3767fe93401.jpg?v=1737121874"},{"product_id":"zoom-fixed-square-recessed-downlight-white-ip65-gu10","title":"Zoom Fixed Square Recessed Downlight White IP65 - GU10","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zoom is an 85mm square recessed downlight with a white powder-coated cast aluminium body and an IP65 rating that seals out dust and water ingress. The fitting takes a single GU10 bulb (sold separately) up to 50W and sits in a fixed position rather than tiltable, directing light straight down from the ceiling plane.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, kitchens, utility rooms and outdoor soffits where moisture protection is required, the IP65 rating makes the Zoom suitable for shower zones, above kitchen sinks and under covered outdoor areas. The 45mm ceiling depth required for installation fits most modern plasterboard and suspended ceiling voids. The white finish sits flush with white or off-white ceilings without creating a visible boundary between the fitting and the ceiling surface.\u003c\/p\u003e\n\u003cp\u003eThe cast aluminium construction resists corrosion in humid environments better than stamped steel alternatives, and the fixed square bezel provides a crisp geometric aperture that suits contemporary interiors. The square aperture measures 85mm across, producing a slightly wider light spread than a 70mm round equivalent when paired with a wide-beam GU10 LED. The spring clips that secure the fitting into the ceiling cut-out allow the downlight to be removed for bulb changes without tools.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e8.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e8.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_TR003-1-40W3K-W.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP65 mean for bathroom use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 provides complete dust sealing and protection against water jets from any direction, making this downlight suitable for bathroom zones 1 and 2 (above the bath or shower enclosure). It cannot be used in zone 0 (inside the bath or shower tray).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat GU10 bulb is recommended?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting accepts any GU10 bulb up to 50W. Most users pair this with a 5-7W LED GU10 in warm white (2700K-3000K) for general bathroom or kitchen lighting, or a daylight equivalent (4000K) for task-focused areas like vanity mirrors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 45mm fitting depth requires a minimum ceiling void of 50mm to allow clearance for the bulb and the GU10 lampholder. Measure your ceiling void depth before ordering if you have a shallow plasterboard or suspended ceiling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the light direction adjustable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a fixed downlight — the bulb sits in a locked vertical position and cannot be tilted or rotated. For adjustable options, see the Zoom tiltable variants elsewhere in the Maytoni range.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45728677626123,"sku":"DL033-2-01W","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DL033-2-01W_on_w_standard_e0ec7a06-5681-4620-9dfa-6cd33053550b.jpg?v=1737121873"},{"product_id":"bar-outdoor-led-downlight-12w-3000k-graphite","title":"Bar Outdoor LED Downlight 12W 3000K - Graphite","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Bar is a 108mm diameter surface-mounted outdoor downlight in a graphite metal cylinder housing with an integrated 12W 3000K LED. The fitting projects 155mm from the ceiling or soffit and casts a focused downward beam through a honeycomb anti-glare lens set into the base of the cylinder. The IP65 rating seals the body against dust and water jets, making it suitable for year-round installation under eaves, canopies, porches and covered outdoor walkways.\u003c\/p\u003e\n\u003cp\u003eDesigned for mounting to soffits, porch ceilings and overhangs, the Bar provides accent and task lighting for doorways, pathways, covered patios and building facades. The 12W LED delivers 3000K warm-white light at mains voltage (AC 220-240V) without needing an external driver, so the fitting connects directly to standard outdoor lighting circuits. The graphite finish is a mid-tone grey with a low-sheen powder coat that resists corrosion and pairs with contemporary, industrial and minimalist exteriors.\u003c\/p\u003e\n\u003cp\u003eThe metal body is cold-forged aluminium with internal heat-dissipation fins that keep the LED module within operating temperature in ambient conditions up to 40°C. The honeycomb lens controls beam spread and reduces glare when viewed from below, making the fitting comfortable to walk under. The 108mm diameter is compact enough to install in multiples along a soffit run or pergola beam without visual crowding, while the 155mm projection gives clearance for doorways and walkways with ceiling heights of 2.2m or above.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e15.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e10.8cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGraphite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 220-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003e3000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_O418FL-01B1.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Bar suitable for fully exposed outdoor installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating protects against dust and water jets, making the Bar suitable for installation under eaves, soffits, canopies and covered porches. For fully exposed positions subject to heavy rain or direct water spray, consider a higher-rated IP fitting or ensure the fitting is angled to prevent water pooling on the lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need an external driver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The integrated 12W LED operates directly from mains voltage (AC 220-240V), so the fitting wires into standard outdoor lighting circuits without a separate driver unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat beam angle does it produce?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMaytoni does not publish the exact beam angle for this model, but the honeycomb anti-glare lens indicates a controlled downward beam rather than wide flood. Expect a focused accent beam suitable for highlighting doorways, pathways or building features rather than broad area coverage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple fittings be installed in a row along a soffit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 108mm diameter is compact enough to install in multiples along a soffit run, pergola beam or canopy edge. Space fittings 1-1.5m apart for continuous pathway lighting or 2-3m apart for accent positions.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45729043710219,"sku":"O306CL-L12GF","price":89.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/O306CL-L12GF_on_w_standard__4_6df6674d-a80e-4114-adc9-1cdee5cd7599.jpg?v=1737121495"},{"product_id":"bar-outdoor-led-downlight-7w-3000k-graphite","title":"Bar Outdoor LED Downlight 7W 3000K - Graphite","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Maytoni Bar is a 90mm diameter surface-mounted outdoor downlight with an integrated 7W LED emitting warm 3000K light through a recessed honeycomb diffuser. The cylindrical body is formed from metal finished in graphite, with a sealed internal chamber that achieves IP65 protection against dust ingress and water jets from any direction.\u003c\/p\u003e\n\u003cp\u003eDesigned for exterior surface mounting on soffits, porch ceilings, covered entrance areas and garden structure beams, the Bar delivers focused downward illumination suitable for pathway lighting, doorway accent, and architectural feature highlighting. The 115mm height projects from the ceiling, making it suitable for installation on overhead beams, pergola structures and low soffits where recessed fittings cannot be cut in. The 100-240V AC input allows installation on standard UK and international mains.\u003c\/p\u003e\n\u003cp\u003eThe graphite powder-coat finish resists corrosion in coastal and high-moisture environments and sits visually neutral against most exterior materials including timber cladding, painted render, brick and stone. The honeycomb diffuser inside the downward aperture reduces glare while maintaining light output, directing the beam downwards without spill into horizontal sightlines. At 7W power draw the LED consumes approximately 84% less energy than a 60W halogen equivalent while producing comparable lumen output.\u003c\/p\u003e\n\u003cp\u003eThe fitting is installed by mounting directly to the ceiling surface with fixings through the base plate, then connecting to mains wiring inside the sealed chamber before clipping the outer cylinder in place. The IP65 rating maintains integrity in rain, snow, and high-pressure cleaning scenarios, making the Bar suitable for year-round installation in exposed positions. Maytoni supplies a 3-year manufacturer guarantee covering LED module failure and body integrity.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e11.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e9cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGraphite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 100-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003e3000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_O418FL-01GR.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in fully exposed outdoor positions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating means the fitting is protected against dust and water jets from any direction. It can be installed in positions exposed to rain, snow and high-pressure cleaning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounting surface is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Bar surface-mounts directly to the ceiling or soffit. The base plate requires a solid mounting surface such as timber, masonry or metal beam to accept fixing screws. It cannot be recessed into the ceiling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the LED replaceable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LED module is integrated into the fitting and is not user-replaceable. The 3-year manufacturer guarantee covers LED module failure within the warranty period.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat beam angle does it produce?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe honeycomb diffuser creates a focused downward beam with minimal horizontal spill. The exact beam angle is not specified in the product data, but the diffuser design indicates a narrow to medium beam suitable for accent lighting rather than wide-area flood illumination.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45729044332811,"sku":"O306CL-L7GF","price":84.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/O306CL-L7GF_on_w_standard__3_c0761a2e-a94a-47fc-81e9-f8088922d645.jpg?v=1737121494"},{"product_id":"sally-led-round-recessed-downlight-ip65-11w-3000k-white","title":"Sally LED Round Recessed Downlight IP65 11W 3000K - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Sally is an 85mm recessed LED downlight with an IP65 rating, housing an integrated 11W COB LED at 3000K colour temperature behind a white die-cast aluminium trim. The IP65 rating provides full protection against dust ingress and water jets from any direction, making the Sally suitable for installation in bathrooms, shower rooms, covered outdoor soffits, and other locations where moisture is present.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation into plasterboard or panel ceilings, the Sally provides fixed-direction downward illumination for hallways, bathroom task lighting, kitchen perimeters, and retail or hospitality spaces requiring moisture-resistant fittings. The 3000K warm white output delivers a neutral tone that works across residential and light commercial interiors without the cooler cast of 4000K+ commercial LEDs. The 11W integrated LED cannot be replaced but carries a 5-year warranty from Ideal Lux.\u003c\/p\u003e\n\u003cp\u003eThe 85mm diameter keeps the visible trim small enough to fit into standard ceiling grid spacing while the white powder-coated aluminium finish integrates cleanly into white or light-coloured ceilings. The COB (chip-on-board) LED technology concentrates multiple LED chips onto a single circuit, producing more focused light output with less visible point-source glare than older multi-LED arrays. The fitting is non-dimmable and operates on 230V mains without requiring a separate transformer.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\" style=\"width: 100.035%; height: 137.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 71.5154%; height: 19.6px;\"\u003eDiameter (mm)\u003c\/td\u003e\n\u003ctd style=\"width: 26.0419%; height: 19.6px;\"\u003e85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 71.5154%; height: 19.6px;\"\u003eDimmable\u003c\/td\u003e\n\u003ctd style=\"width: 26.0419%; height: 19.6px;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 71.5154%; height: 19.6px;\"\u003eNumber Of Bulbs\u003c\/td\u003e\n\u003ctd style=\"width: 26.0419%; height: 19.6px;\"\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 71.5154%; height: 19.6px;\"\u003eBulb Type\u003c\/td\u003e\n\u003ctd style=\"width: 26.0419%; height: 19.6px;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 71.5154%; height: 19.6px;\"\u003eColour Temperature\u003c\/td\u003e\n\u003ctd style=\"width: 26.0419%; height: 19.6px;\"\u003e3000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 71.5154%; height: 19.6px;\"\u003eIP Rating\u003c\/td\u003e\n\u003ctd style=\"width: 26.0419%; height: 19.6px;\"\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 71.5154%; height: 19.6px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"width: 26.0419%; height: 19.6px;\"\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom shower area?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating provides full protection against water jets, making the Sally suitable for installation in bathroom zones 1 and 2 (directly above baths and showers) subject to correct installation and compliance with BS 7671 wiring regulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling depth is required for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRecessed downlights typically require 80-100mm ceiling void depth to accommodate the driver housing and LED module. Check the installation instructions for the exact cut-out and depth requirements before ordering if ceiling depth is limited.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the LED replaceable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The 11W COB LED is integrated into the fitting and cannot be replaced. The LED carries a 5-year warranty from Ideal Lux and is rated for approximately 30,000 hours of use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating makes the Sally suitable for covered outdoor locations such as porch ceilings, carport soffits, and covered walkways. It should not be installed in fully exposed locations subject to direct rainfall or freezing conditions without additional protection.\u003c\/p\u003e","brand":"Ideal Lux","offers":[{"title":"Default Title","offer_id":45733300338955,"sku":"313191","price":91.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/313191_WEB001_GAME_TRIM_ROUND_11W_3000K_WH_WH_IP65_5f1f05b1-3a48-45bf-9667-74395aac3fd3.jpg?v=1724724360"},{"product_id":"sally-led-round-recessed-trim-downlight-ip65-11w-3000k-black","title":"Sally LED Round Recessed Trim Downlight - IP65, 11W, 3000K, Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Sally is an 85mm diameter recessed downlight with an integrated 11W 3000K LED and IP65 rating, built around a die-cast aluminium trim finished in matt black. The IP65 seal protects against dust ingress and low-pressure water jets from any direction, making the fitting suitable for bathrooms, shower rooms, covered outdoor soffits and commercial kitchens where moisture exposure is routine.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation in plasterboard, panel or suspended ceilings, the Sally fits a standard downlight cutout and connects directly to 230V mains without requiring an external driver or transformer. The fixed beam angle delivers downward-focused illumination over a work surface, bathroom vanity or walkway, rather than ambient room light. The 11W COB LED runs cooler and lasts longer than halogen equivalents, reducing maintenance cycles in hard-to-reach ceiling positions.\u003c\/p\u003e\n\u003cp\u003eThe 3000K colour temperature produces a warm white light comparable to halogen without the yellow cast of 2700K or the clinical tone of 4000K, sitting comfortably in domestic and hospitality interiors. The matt black trim provides a defined edge against white ceilings and pairs cleanly with industrial, contemporary and minimalist schemes. At 85mm outer diameter the Sally occupies a similar footprint to traditional GU10 downlights, allowing for retrofit into existing ceiling grids without widening cutouts.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter (mm)\u003c\/td\u003e\n\u003ctd\u003e85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber Of Bulbs\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb Type\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003e3000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating protects against direct water jets from any angle, making the Sally suitable for installation in bathroom zones 1 and 2 (directly above a bath or shower enclosure) as well as general bathroom ceiling positions. It is not submersible and should not be installed in zone 0.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Sally dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The integrated LED is not compatible with dimmer switches. Connecting the Sally to a dimmed circuit may cause flickering or failure to light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling cutout size is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Sally requires a standard downlight cutout, typically 65-75mm diameter depending on the specific installation spring clip design. The 85mm diameter quoted is the outer trim diameter visible from below once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the beam angle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIdeal Lux does not publish a specific beam angle for the Sally in the provided specification. Typical fixed COB downlights of this type deliver a 60-90° beam, providing focused downward light rather than wide room wash. Contact us if you require exact photometric data before ordering.\u003c\/p\u003e","brand":"Ideal Lux","offers":[{"title":"Default Title","offer_id":45733344313611,"sku":"327754","price":91.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/327754_WEB001_GAME_TRIM_ROUND_11W_3000K_BK_BK_IP65_a1159c1a-22ba-4b2c-a3ba-5ef34fca11ca.jpg?v=1729263529"},{"product_id":"lumilife-outdoor-spotlight-fitting-gu10-ip65-fire-rated-chrome-quick-connect","title":"50W GU10 Spotlight Fitting - Quick Connect - Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is a recessed spotlight fitting for a single GU10 lamp, finished in chrome with a die cast aluminium body. No lamp is supplied, which is the point of buying a fitting on its own: you pick the GU10 that suits the room, and you can swap it years later without disturbing the ceiling. The fitting is rated at 50W, the ceiling figure for the lamp you put in it, and it runs from an ordinary 220-240V mains supply. It is fire rated for 30, 60 and 90 minutes. A quick connect terminal block sits on a folding bracket at the side, so the mains connection pushes home rather than being screwed down.\u003c\/p\u003e\n\u003cp\u003eRecessed spotlights earn their keep in kitchens, hallways, landings and living rooms, where a line of them lights a worktop or a walkway evenly and leaves nothing hanging below the ceiling. Chrome reads brighter than white against a painted ceiling and picks up the tone of stainless appliances, glass splashbacks and brushed metal handles, so it is an easy match in a kitchen or a hallway with metal door furniture. Two sprung clips on the bezel compress as the fitting goes up into the cut-out and then spring out above the ceiling to hold it flat.\u003c\/p\u003e\n\u003cp\u003eThe fitting is listed as dimmable, so the dimming behaviour comes down to the lamp and the wall dimmer: choose a GU10 marked dimmable and a dimmer rated for low LED loads, and check the dimmer's minimum load against the total of the lamps on that circuit. It needs a 72mm cut-out and at least 122mm of ceiling void. It is sold as one fitting, with a minimum order of one. Tilted GU10 spotlight fittings in chrome and white, and the same fitting in white, sit alongside it in our range.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRecessed spotlight downlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight source\u003c\/td\u003e\n\u003ctd\u003eGU10 lamp, not supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp fitting\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e50W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eDie cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003e1 fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum order\u003c\/td\u003e\n\u003ctd\u003e1, sold in multiples of 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (front)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out\u003c\/td\u003e\n\u003ctd\u003e72mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum ceiling void\u003c\/td\u003e\n\u003ctd\u003e122mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFire rating\u003c\/td\u003e\n\u003ctd\u003e30, 60 and 90 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs a GU10 lamp included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The fitting is supplied on its own, so you choose the GU10 lamp separately and can set the colour temperature and brightness to suit the room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I dim it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the fitting is listed as dimmable. The result depends on the GU10 lamp you fit and the wall dimmer, so use a lamp marked dimmable and a dimmer rated for LED loads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size hole does it need in the ceiling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt needs a 72mm cut-out and at least 122mm of ceiling void. If you are fitting it into an existing hole, check that the hole is 72mm across.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the 50W rating mean when I choose a lamp?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is the ceiling figure for the lamp the fitting will take. A GU10 LED lamp draws a small fraction of that, so any current LED GU10 sits well within it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the quick connect terminal for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is a push fit mains block on a folding bracket, so the supply connects without screw terminals. The wiring should still be done by a qualified electrician.\u003c\/p\u003e","brand":"LumiLife","offers":[{"title":"Default Title","offer_id":46074335985931,"sku":"S15506","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/S15506_00.jpg?v=1789909818"},{"product_id":"lumilife-gu10-fire-rated-outdoor-downlight-ip65-white-quick-connect","title":"50W Quick Connect GU10 Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is a recessed GU10 downlight fitting with a white round bezel, a die-cast aluminium build and a rated wattage of 50W. The bezel sits against the ceiling and the black body behind it carries the GU10 lamp holder, with two sprung clips on the sides that grip the ceiling board once the fitting has been pushed up through the hole. A quick connect terminal block is mounted on a bracket at the rear, which is where the mains feed lands. The manufacturer states the fitting as dimmable. It is fire rated for 30, 60 and 90 minutes.\u003c\/p\u003e\n\u003cp\u003eDownlights like this go into kitchen, hallway, landing, living room and bedroom ceilings, usually in a run of three or four spaced evenly along the room or in a line above a worktop. The bezel is fixed rather than tilting, so the light falls straight down, which suits general ceiling lighting and even coverage more than picking out a picture or a wall. White is the finish to pick when you want the fitting to read as part of a painted ceiling rather than as hardware. We also list the same fitting in chrome, and tilted versions in white and chrome if you would rather angle the beam.\u003c\/p\u003e\n\u003cp\u003eThe 50W figure is the ceiling the fitting is rated to rather than a target, and a GU10 LED lamp will draw a small fraction of it. Brightness, colour temperature and beam angle all come from the lamp you choose, so buy the lamp on the light you want. The fitting is stated as dimmable, so the pairing that decides how smoothly it dims is a GU10 marked dimmable together with a dimmer rated for LED loads. It runs on a 220-240V mains supply. One unit is one fitting, with a minimum order of one, so you can order the exact number a room needs.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRecessed downlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp fitting\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e50W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003e1 fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum order\u003c\/td\u003e\n\u003ctd\u003e1, sold in multiples of 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (front)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out\u003c\/td\u003e\n\u003ctd\u003e72mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum ceiling void\u003c\/td\u003e\n\u003ctd\u003e122mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFire rating\u003c\/td\u003e\n\u003ctd\u003e30, 60 and 90 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich lamps does this fitting take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt takes a GU10 lamp, the twist and lock cap with two stubby pins, up to the rated 50W. Any GU10 will fit mechanically, so choose on brightness and colour temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it dim?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe manufacturer states the fitting as dimmable. Because the light itself comes from the lamp, fit a GU10 marked dimmable and use a dimmer rated for LED loads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size hole does it need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt needs a 72mm cut-out and at least 122mm of ceiling void. If you are replacing an existing downlight, measure the hole in your ceiling before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does quick connect mean here?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA terminal block is fitted to the bracket at the back, so the mains feed is terminated at the fitting itself. Wiring should be carried out by a competent person.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a lamp supplied with it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is one fitting and the manufacturer does not list a lamp as part of it, so plan on buying a GU10 lamp for each fitting.\u003c\/p\u003e","brand":"LumiLife","offers":[{"title":"Default Title","offer_id":46074336674059,"sku":"S15507","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/S15507_00.jpg?v=1789909822"},{"product_id":"ip65-slimline-fixed-downlight-chrome-frosted-glass-gu10","title":"Indoor IP65 Fixed Downlight - Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is a fixed round downlight for recessed ceiling installation, supplied with a polished chrome bezel and a frosted lens. The specification gives it an IP65 rating, and the retail box carries the same figure, so the two sources agree on what the buyer is being told. In an IP code the first digit reports protection against solid objects and dust and the second reports protection against water, so 65 pairs a dust tight first digit with a water jet second digit. The specification also records the fitting as dimmable.\u003c\/p\u003e\n\u003cp\u003eFixed means the lens sits flush and does not tilt, so the light goes straight down. That makes it a workhorse for even, repeating ceiling light in kitchens, hallways, landings and utility rooms, where a row of identical fittings matters more than aiming a beam at one wall or picture. If you want light thrown onto artwork or a splashback, an adjustable or tilting head is the better choice. The chrome bezel picks up nearby metal, so it sits comfortably with chrome taps, brushed steel appliances and chrome switch plates. The box shows the same downlight offered in chrome, brushed and white, and this listing is the chrome.\u003c\/p\u003e\n\u003cp\u003eOrdering notes matter more than usual here. One unit is one downlight, and the minimum order is five, sold in multiples of five, so the smallest purchase covers a short run of ceiling. The dimmable rating tells you the fitting will work on a dimmer, but the supplier does not publish which dimmer modules it has been tested with, and dimming behaviour depends on the driver and the dimmer together. The specification and the pack also stop short of a wattage, a lumen output, a colour temperature and a cut-out diameter, all of which you need before you cut a hole in a ceiling, so ask us for the current figures rather than guessing from a similar looking fitting.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eFixed recessed downlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (supplier specification, and printed on the retail box)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eSingle downlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum order\u003c\/td\u003e\n\u003ctd\u003e5, sold in multiples of 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this downlight dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The supplier specification records it as dimmable, though it does not list the dimmer modules it has been tested against, so match it to your dimmer carefully.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size hole in the ceiling does it need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe supplier gives no cut-out diameter and none is printed on the box we can read, so please ask us for the figure before you cut anything.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include a lamp, and what colour of light does it give?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNeither the specification nor the retail box states a lamp type, a wattage, a lumen output or a colour temperature, so we will not guess at any of them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the IP65 rating actually mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe first digit, 6, means dust tight, and the second, 5, means protected against water jets. Always follow the installation instructions supplied in the box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is a mains voltage recessed fitting, so it should be installed by a competent electrician, who will also check the clearance available in your ceiling void.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is the minimum order five?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis line is sold to us in trade multiples, so the smallest quantity we can supply is five downlights, and orders go up in fives from there.\u003c\/p\u003e","brand":"PowerMaster","offers":[{"title":"Default Title","offer_id":46075263156491,"sku":"S7687","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/S7687_00.jpg?v=1789665955"},{"product_id":"powermaster-ip65-recessed-fixed-downlight-brushed-chrome","title":"IP65 Slimline Fixed Downlight - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is a fixed downlight with an IP65 rating, finished in brushed chrome. Fixed means the lens sits square in the ceiling and the light points straight down, so it is the version to choose when you want an even wash across a room rather than a beam angled at a wall or a mirror. The photographs show a plain round bezel with a softly brushed silver toned surface and a frosted centre lens, which diffuses the light and takes the hard edge off the source when you look up at it. The retail pack calls the range slimline and lists chrome, brushed and white as the three finishes, so a run of them can be matched to what is already in the ceiling.\u003c\/p\u003e\n\u003cp\u003eThe IP rating is what earns this fitting a place in a bathroom. IP65 means protected against dust and against low pressure water jets from any direction, and the supplier states it is suitable for zones 1 and 2 only, not zone 0. In practice that covers the ceiling above a bath or over a shower enclosure, as well as the rest of the room, but never inside the bath or shower basin itself. The same protection is useful in a kitchen ceiling above a hob or a sink, or in a utility room.\u003c\/p\u003e\n\u003cp\u003eThe supplier lists the fitting as dimmable, so it can go on a dimmer circuit, though the dimming itself depends on the lamp fitted and on a dimmer matched to it. Each listing is one downlight, so count your ceiling openings before ordering. Wiring a recessed fitting into a ceiling is mains work, and in a bathroom it is a job for a qualified electrician.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixture type\u003c\/td\u003e\n\u003ctd\u003eRecessed downlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment\u003c\/td\u003e\n\u003ctd\u003eFixed, non-tilt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBathroom zone\u003c\/td\u003e\n\u003ctd\u003eSuitable for zones 1 and 2 only, not zone 0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003e1 downlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum order\u003c\/td\u003e\n\u003ctd\u003e1, sold in multiples of 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this above a bath or a shower?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The supplier rates it IP65 and states it suits zones 1 and 2 only, so it can sit above a bath or a shower enclosure, but never within zone 0.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat lamp does it take, and is one included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe supplier specification does not state the lamp holder, the wattage or whether a lamp is supplied, and the retail pack does not print it either, so please check with us before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe supplier specification lists it as dimmable. Dimming behaviour still depends on the lamp fitted and on using a dimmer switch rated for that lamp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat colour is the light it gives out?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo colour temperature is given by the supplier or printed on the retail pack, so we cannot tell you whether it runs warm white or cool white.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size hole does it need in the ceiling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe supplier does not publish a cut out diameter or an overall size for this fitting, so please ask us for the figure before you make any holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the brushed chrome match my other fittings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe photograph shows a softly brushed silver toned finish rather than a mirror polish. The same body is also offered in chrome and in white if you need a closer match.\u003c\/p\u003e","brand":"PowerMaster","offers":[{"title":"Default Title","offer_id":46075263353099,"sku":"S7688","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/S7688_01.jpg?v=1789672525"},{"product_id":"fire-rated-led-dimmable-downlight-6w-4000k-white","title":"Fire-Rated LED Dimmable Downlight 6W 4000K - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge RW6CW is a 6W fire-rated LED downlight with an integrated driver, delivering 690 lumens of 4000K cool white light through a 40° beam angle. The white aluminium and polycarbonate construction carries an IP65 rating on the front face (IP20 from above), making it suitable for bathrooms, kitchens and zones requiring moisture protection. Fire testing to 30\/60\/90 minutes with solid wood joists meets Building Regulations for ceiling penetrations.\u003c\/p\u003e\n\u003cp\u003eDesigned for recessed installation in ceilings with a minimum 120mm void depth, the downlight requires a 72mm cut-out and projects just 7mm below the ceiling line once fitted. The integrated driver sits in the purple thermally-rated housing above the ceiling, with loop-in\/loop-out terminal blocks allowing daisy-chain wiring across multiple fittings. Push-fit terminals speed installation and the interchangeable white bezel can be swapped for alternative finishes if required.\u003c\/p\u003e\n\u003cp\u003eThe 4000K colour temperature produces a neutral cool white light suited to task lighting in kitchens, utility rooms, hallways and commercial spaces where clarity matters more than warmth. The downlight is dimmable with compatible leading-edge and trailing-edge dimmers — check dimmer compatibility before pairing. The L70B50 rating of 54,000 hours indicates the point at which 50% of tested units maintain 70% of initial output, translating to approximately 24 years at 6 hours per day use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e67mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e72mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium \u0026amp; polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e54000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e4000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCool White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e690lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light source only)\u003c\/td\u003e\n\u003ctd\u003e990lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e6W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy (Light source)\u003c\/td\u003e\n\u003ctd\u003e164.88lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-RW6CW.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 120mm void depth is needed above the ceiling to accommodate the 67mm recessed depth of the fitting plus the driver housing. The 72mm cut-out diameter determines the hole size in the plasterboard or ceiling material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for bathroom zones?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating on the front face meets requirements for bathroom zones 1 and 2 (above the bath\/shower). Note the IP20 rating from above means the void space above the ceiling must not be subject to water ingress.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the fire rating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight is tested and rated for 30, 60 and 90 minute fire resistance when installed in ceilings with solid wood joists, meeting Part B Building Regulations for fire-rated ceiling penetrations in UK residential and commercial buildings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple downlights be wired together?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The integrated driver includes loop-in\/loop-out terminal blocks with push-fit connectors, allowing multiple downlights to be daisy-chained from a single feed circuit without needing junction boxes at each fitting.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391563628811,"sku":"RW6CW","price":6.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/158746_1e48aa55-361d-4d7c-9ed4-2a0343a81484.jpg?v=1747061778"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/collections\/interior_DL032-2-01B_standard__1_b2420674-02d9-4db6-9357-bb8929c57588.jpg?v=1791128769","url":"https:\/\/niori.co.uk\/collections\/ip65-downlights.oembed","provider":"Niori","version":"1.0","type":"link"}