{"title":"Fire Rated Downlights","description":"\u003cp\u003eOur fire rated downlights help keep a ceiling's fire barrier in place where a hole is cut for a light, which matters when the ceiling sits between floors or between homes. We stock fixed and tilting designs in white, chrome and brass. Most take a replaceable bulb, many have integrated LEDs, and most are dimmable and suit kitchens, bathrooms and hallways.\u003c\/p\u003e","products":[{"product_id":"spektroled-evo-4-cct-dimmable-fixed-fire-rated-led-downlight-white","title":"SpektroLED Evo 4-CCT Dimmable Fixed Fire Rated LED Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SpektroLED Evo is a fixed fire-rated LED downlight with selectable wattage (5W or 7W) and four selectable colour temperatures (2700K, 3000K, 4000K, 6000K). The switches controlling both wattage and CCT are located beneath the magnetic bezel, allowing adjustment after installation without removing the fitting from the ceiling. The integrated SMD LED delivers between 580 and 870 lumens depending on the wattage and CCT combination selected.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, kitchens, hallways and living rooms, the downlight carries an IP65 rating from below (IP20 from above), making it suitable for wet zones including Zone 1 in bathrooms. The 70mm cut-out fits standard UK ceiling joists with a 45mm minimum void depth. The fire rating covers 30\/60\/90-minute solid timber, 30-minute web joist and 30-minute i-joist installations, and the fitting is IC-rated for direct contact with thermal insulation. The male-female connector system allows cables to be terminated and hidden until decoration is complete, with the downlight plugged in only after painting.\u003c\/p\u003e\n\u003cp\u003eThe white housing shown is sold without a bezel — magnetic bezels are available separately in white, matt black, chrome, polished chrome, brass and antique brass finishes, allowing the same downlight to match different interior schemes. The pressed steel construction keeps the overall recessed depth to 43mm, making it one of the slimmest fire-rated downlights available for UK ceilings. The fitting is dimmable with trailing-edge dimmers and carries a 5-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e43 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e580\/600\/630\/620\/780\/810\/870\/840 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1020 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e144 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6167462_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan I change the colour temperature after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The CCT selector switch is located beneath the magnetic bezel. Once the downlight is installed, you can remove the bezel magnetically, adjust the switch to select between 2700K, 3000K, 4000K or 6000K, and replace the bezel without disturbing the ceiling mounting or wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for bathroom use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The downlight carries an IP65 rating from below, making it suitable for Zone 1 in bathrooms (directly above baths and showers). The IP rating from above is IP20, so the void space above the ceiling should remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bezel finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is sold without a bezel. Magnetic bezels are available separately in white, matt black, chrome, polished chrome, brass and antique brass. The bezel choice does not affect the light output or colour temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, with trailing-edge dimmers. Check compatibility with your specific dimmer model before installation — leading-edge dimmers may cause flickering or poor dimming performance with LED drivers.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723386123,"sku":"SPKEVF","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607266_7336a57d-cfe5-4482-92d4-6d6144c059fa.jpg?v=1714663257"},{"product_id":"knightsbridge-spektroled-evo-7w-dimmable-tilt-fire-rated-downlight-4-cct-white","title":"Knightsbridge SpektroLED Evo 7W Dimmable Tilt Fire Rated Downlight - 4-CCT White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SpektroLED Evo is a fire-rated recessed downlight with selectable wattage (5W or 7W), four colour temperatures (2700K, 3000K, 4000K, 6000K) and a 90-degree tilt mechanism. The fitting uses an integrated SMD LED array behind a prismatic diffuser, delivering between 565-865 lumens depending on wattage and CCT settings. The white pressed-steel bezel measures 90mm diameter and fits a 70mm cut-out with 56mm recessed depth.\u003c\/p\u003e\n\u003cp\u003eDesigned for new-build and retrofit ceiling installation, the SpektroLED Evo carries 30\/60\/90-minute fire ratings for solid timber joists, 30-minute ratings for web and I-joists, and IC rating for direct contact with loft insulation. The IP65 rating from below makes it suitable for bathroom zones 1 and 2, while the IP20 rating from above allows standard mains wiring in the ceiling void. The 90-degree tilt allows light to be directed onto walls, artworks or feature areas rather than straight down.\u003c\/p\u003e\n\u003cp\u003eThe fitting uses a male-female connector system that separates the downlight body from the mains cable, allowing first-fix wiring to be completed and terminated before decoration, with the luminaire body plugged in and clipped into the ceiling after painting. The same connector allows the fitting to be unplugged for lamp maintenance or redecorating without re-terminating cables. The dimmable driver works with trailing-edge dimmers and the 50,000-hour L70B10 rating suggests the LED will maintain 70% of initial output for approximately 11 years of continuous use.\u003c\/p\u003e\n\u003cp\u003eThe white finish pairs with standard white ceilings in residential, hospitality and commercial settings. Knightsbridge produces the SpektroLED Evo in six finishes (white, matt black, brushed chrome, polished chrome, brass, antique brass) sold as separate SKUs. The CCT and wattage are set via switches on the back of the fitting before installation, allowing a single stock item to cover multiple lighting scenarios.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6173131_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes it suitable for bathroom zones 1 and 2 (directly above a bath or shower enclosure). The IP20 rating from above requires standard ceiling void conditions with no water ingress from the loft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFour CCT settings (2700K, 3000K, 4000K, 6000K) are selected via switches on the back of the fitting before installation. Once the fitting is clipped into the ceiling the setting cannot be changed without removing the downlight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, but only trailing-edge dimmers. Leading-edge dimmers may cause flicker or fail to dim smoothly. Check dimmer compatibility with the manufacturer before installation, particularly when multiple downlights are controlled from a single dimmer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the tilt mechanism allow?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe inner lamp holder tilts up to 90 degrees within the bezel, allowing light to be directed onto walls, artwork or feature areas rather than straight down. The tilt is adjusted by hand after the fitting is installed.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723418891,"sku":"SPKEVTW","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607336_b6d3897e-f2e3-4137-8a39-5163df27e1d6.jpg?v=1714663259"},{"product_id":"spektroled-evo-ip65-tilt-fire-rated-led-downlight-matt-black-4-cct-dimmable","title":"SpektroLED Evo IP65 Tilt Fire Rated LED Downlight - Matt Black 4-CCT Dimmable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SpektroLED Evo is a fire-rated tilt downlight with selectable wattage (5W or 7W), four colour temperatures (2700K, 3000K, 4000K, 6000K) switchable on installation, and a 90-degree tilt mechanism housed in a matt black pressed steel bezel. The IP65 rating from below makes it suitable for bathrooms, shower rooms and wet-use zones as well as standard dry ceiling installations.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and light commercial use, the downlight fits a 70mm ceiling cut-out with a 56mm recessed depth. The male-female power connector system allows first-fix wiring to be terminated and concealed during decoration, with the luminaire itself plugged in and fitted after painting is complete. The same connector lets the fitting be removed for lamp replacement or maintenance without re-wiring. The tilt mechanism provides smooth 90-degree adjustment to direct light onto artwork, worktops, or specific zones within a room.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel construction carries fire ratings of 30\/60\/90 minutes on solid timber joists, 30 minutes on web joists, and 30 minutes on i-joists. The fitting is IC-rated for direct contact with ceiling insulation and carries acoustic rating ISO 10140-2:2010, making it suitable for multi-occupancy installations where sound transmission between floors must be controlled. The selectable wattage allows output to be reduced from 7W to 5W where lower light levels or tighter energy budgets are needed.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish provides a clean contrast against white or light-coloured ceilings and suits contemporary, industrial and minimalist interiors. The downlight is dimmable when paired with trailing-edge dimmers — compatibility should be checked before installation. The four colour temperatures cover warm residential lighting (2700K), hospitality and retail (3000K), office and task lighting (4000K), and clinical or high-contrast applications (6000K), all selectable from the same fitting.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174437_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this downlight dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the SpektroLED Evo is dimmable when paired with trailing-edge dimmers. Compatibility varies by dimmer model, so check with the dimmer manufacturer before installation to confirm it supports LED loads in the 5-7W range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature or wattage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSwitches on the rear of the fitting allow you to select between 2700K, 3000K, 4000K and 6000K colour temperatures, and between 5W and 7W output. These are set during installation and are not accessible once the downlight is fitted into the ceiling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 56mm void depth is needed above the ceiling. The cut-out diameter is 70mm and the visible bezel diameter once fitted is 90mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes it suitable for wet-use zones including directly above showers and baths. The IP rating from above is IP20, so it must be protected from direct water ingress in the ceiling void.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723451659,"sku":"SPKEVTMB","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607322_fd189a25-ac8e-4bb9-8d89-d1d7b8ac4b42.jpg?v=1714663261"},{"product_id":"spektroled-evo-7w-fire-rated-tilt-led-downlight-4-cct-polished-chrome","title":"SpektroLED Evo 7W Fire Rated Tilt LED Downlight 4-CCT - Polished Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SpektroLED Evo is a fire-rated recessed LED downlight with adjustable wattage (5W or 7W) and selectable colour temperature (2700K, 3000K, 4000K, 6000K) controlled by switches on the rear of the fitting. The polished chrome bezel tilts through 90 degrees to direct light onto walls, artwork or specific features within a room. The fitting is IP65 rated from the front and IP20 from above, allowing installation in bathrooms and wet-rated zones.\u003c\/p\u003e\n\u003cp\u003eDesigned for use in ceilings requiring fire certification, the SpektroLED Evo carries 30\/60\/90-minute fire ratings for solid timber joists, 30-minute ratings for web joists and I-joists, and meets acoustic rating ISO 10140-2:2010. The 70mm cut-out fits standard ceiling apertures and the 56mm recessed depth accommodates typical ceiling voids. The fitting is IC-rated for direct contact with loft insulation without overheating. First-fix and second-fix connectors allow the cable to be terminated and concealed during decoration, with the downlight plugged in afterwards.\u003c\/p\u003e\n\u003cp\u003eThe polished chrome finish provides a reflective metallic accent that pairs with both traditional and modern interiors. The pressed steel construction and prismatic diffuser distribute the SMD LED output evenly across a 60-degree beam angle. At 7W the fitting delivers between 745lm and 865lm depending on the CCT selected, giving sufficient task and general lighting for kitchens, bathrooms, hallways and living rooms with 2.4m ceiling heights. The fitting is dimmable with trailing-edge dimmers and carries a 5-year warranty.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174443_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature and wattage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo DIP switches on the rear of the fitting allow you to select between 5W and 7W output and between 2700K, 3000K, 4000K and 6000K colour temperatures. Adjust before installation or after disconnecting mains power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be installed in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from the front allows installation in bathroom zones 1 and 2 (within 2.25m of a bath or shower) provided the fitting is installed correctly with all cable entries sealed. The IP20 rating from above means the ceiling void itself must be dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the tilt mechanism smooth?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel tilts through 90 degrees on a friction joint that holds the selected angle without sagging or needing a locking screw. This allows precise aiming at walls, artwork or specific surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does this carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is rated for 30\/60\/90 minutes in solid timber joists, 30 minutes in web joists and I-joists. It also carries acoustic rating ISO 10140-2:2010 for installations requiring sound insulation between floors.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723517195,"sku":"SPKEVTPC","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607326_9c417de1-e27d-42d6-9270-1d2d23f2616b.jpg?v=1714663263"},{"product_id":"spektroled-evo-4-cct-tilt-fire-rated-led-downlight-brushed-brass-ip65","title":"SpektroLED Evo 4-CCT Tilt Fire-Rated LED Downlight - Brushed Brass IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SpektroLED Evo is a recessed LED downlight with a 90-degree tilt mechanism, selectable colour temperature between 2700K, 3000K, 4000K and 6000K, and selectable 5W or 7W output. The brushed brass bezel sits 90mm wide at the ceiling surface with a 70mm cut-out diameter, fitting into ceilings with a minimum 56mm void depth. The lamp technology is SMD LED with a prismatic diffuser, delivering between 565-865 lumens depending on the CCT and wattage selection.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential bathrooms, kitchens, hallways and living spaces, the downlight carries an IP65 rating from below (IP20 from above), making it suitable for Zone 2 bathroom installations and other wet or humid environments. The fire-rating covers 30\/60\/90-minute solid timber, 30-minute web joist and 30-minute i-joist installations, and the fitting is IC-rated for direct contact with ceiling insulation. The tilt mechanism allows the light beam to be angled up to 90 degrees from vertical, directing light onto walls, worktops or feature areas rather than straight down.\u003c\/p\u003e\n\u003cp\u003eThe fitting uses a male-female connector system that allows cables to be terminated and hidden during decoration, with the downlight body plugged in after the room is finished. This means the brushed brass bezel stays clean during plastering and painting, and the fitting can be unplugged for future maintenance or redecorating without re-wiring. The pressed steel construction and Class II double-insulated design mean no earth connection is required. Dimmable on trailing-edge dimmers (compatibility should be checked before installation).\u003c\/p\u003e\n\u003cp\u003eThe 4-CCT selector allows the installer or end user to choose between warm white (2700K), soft white (3000K), neutral white (4000K) and cool white (6000K) after installation, matching the downlight to the room's natural light or to other fittings in the property. The dual-wattage selector provides 5W for lower-output ambient lighting or 7W where brighter task lighting is needed. Complies with current energy efficiency standards and carries a 5-year manufacturer warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174449_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zone is this suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating from below makes the SpektroLED Evo suitable for Zone 2 bathroom installations (areas outside the shower enclosure or bath area but within 0.6m of them). The IP20 rating from above means the ceiling void must remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA selector switch on the rear of the fitting allows you to choose between 2700K, 3000K, 4000K and 6000K before installation. Once the downlight is fitted and powered, the selected CCT remains fixed until the fitting is removed and the switch changed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat dimmer is compatible?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight is dimmable on trailing-edge (electronic) dimmers. Leading-edge (resistive\/inductive) dimmers are not recommended. Knightsbridge publishes a compatibility list on their website — check before pairing with a specific dimmer model to avoid flicker or limited dimming range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SpektroLED Evo range includes white, matt black, brushed chrome, polished chrome, brushed brass and antique brass finishes. Search Niori for \"SpektroLED Evo\" to see the full range in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723549963,"sku":"SPKEVTB","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607312_7656a5e2-0714-4704-8a93-97494dd7bfbe.jpg?v=1714663266"},{"product_id":"spektroled-evo-7w-tilt-fire-rated-led-downlight-4-cct-brushed-chrome-ip65","title":"SpektroLED Evo 7W Tilt Fire Rated LED Downlight 4-CCT - Brushed Chrome IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SpektroLED Evo is a fire-rated tiltable LED downlight with selectable wattage (5W or 7W) and four selectable colour temperatures (2700K, 3000K, 4000K, 6000K), set on installation via switches on the driver. The brushed chrome bezel surrounds a prismatic diffuser that tilts smoothly through 90 degrees, allowing the beam to be directed towards a focal point or angled across a ceiling slope.\u003c\/p\u003e\n\u003cp\u003eDesigned for contractors and refurbishment projects where flexibility reduces stock complexity, the downlight uses a plug-in connector system that separates first-fix wiring from second-fix installation. The mains cable is terminated at first fix and left in the ceiling void; the downlight itself plugs in after decorating is complete. This same connector allows the fitting to be removed for maintenance or redecorating without re-wiring. The IP65 front rating makes the downlight suitable for bathroom zones 1 and 2, while the fire rating covers 30\/60\/90 minute solid timber installations and 30 minute web joist and i-joist constructions.\u003c\/p\u003e\n\u003cp\u003eThe fitting requires a 70mm cut-out and 56mm minimum void depth. The pressed steel construction and IC (insulation contact) rating mean the downlight can be installed in direct contact with loft insulation without overheating. The brushed chrome finish provides a neutral metallic accent that pairs with both warm and cool bathroom palettes, and the 90mm diameter bezel sits flush with the ceiling surface. Output ranges from 565lm at 5W\/2700K to 865lm at 7W\/4000K, giving flexibility to match the light level to the room size and ceiling height. The fitting is dimmable with trailing-edge dimmers and carries a 5-year warranty.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174453_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zones is this downlight suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 front rating makes the SpektroLED Evo suitable for bathroom zones 1 and 2 (directly above a bath or shower enclosure, and within 60cm of a bath or basin). The rear of the fitting is IP20, so ensure the ceiling void is dry and not exposed to water ingress.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature and wattage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall switches on the LED driver inside the fitting allow you to select between 2700K, 3000K, 4000K and 6000K, and between 5W and 7W output. These are set once during installation, not adjusted in use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the fitting be installed in contact with loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IC (insulation contact) rating means the downlight can be covered by or installed in direct contact with loft insulation without overheating. The fire rating covers 30\/60\/90 minute solid timber installations and 30 minute web joist constructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is dimmable with trailing-edge dimmers. Leading-edge dimmers may cause flicker or hum. Check compatibility with your specific dimmer model before installation.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723582731,"sku":"SPKEVTBC","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607314_36ab4de2-808c-41ba-846f-cec4daa35b5f.jpg?v=1714663268"},{"product_id":"spektroled-evo-7w-tilt-fire-rated-led-downlight-ip65-antique-brass","title":"SpektroLED Evo 7W Tilt Fire Rated LED Downlight IP65 - Antique Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SpektroLED Evo is a 90mm fire-rated downlight with 90-degree tilt adjustment, selectable wattage (5W or 7W), and four selectable colour temperatures (2700K, 3000K, 4000K, 6000K). The fitting runs on 230V mains with no external driver, using loop-in loop-out connectors that allow first-fix cable termination before decoration and second-fix plug-in installation after. The antique brass bezel frames a prismatic diffuser over an SMD LED module rated to 50,000 hours L70B10.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential bathrooms, kitchens, hallways and commercial installations where fire rating, IP65 front protection and adjustable light direction are required, the downlight fits a 70mm ceiling cut-out with 56mm recessed depth. The IP65 rating from below makes it suitable for bathroom zones 1 and 2, while the IP20 rating from above means it can be installed in contact with loft insulation (IC rated). Fire-rating covers 30\/60\/90-minute solid timber joists, 30-minute web joists and 30-minute I-joists (Staircraft), plus acoustic rating to ISO 10140-2:2010.\u003c\/p\u003e\n\u003cp\u003eThe tilt mechanism allows the beam to be angled up to 90 degrees from vertical, directing light onto walls, artwork, or work surfaces rather than straight down. The male-female connector system means the downlight can be unplugged for maintenance or redecorating without re-terminating cables. The antique brass finish provides a warm metallic accent that pairs with traditional and warm contemporary interiors, contrasting with the prismatic white diffuser when lit. The fitting is dimmable on trailing-edge dimmers (compatibility should be checked before installation).\u003c\/p\u003e\n\u003cp\u003eThe selectable wattage switch on the fitting allows output to be set to 5W (565-605 lumens depending on CCT) or 7W (745-865 lumens), giving flexibility to match light levels to room size and ceiling height without changing the fitting. The four CCT options cover warm white (2700K), soft white (3000K), neutral white (4000K) and cool white (6000K), selected via switches on the fitting before installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174457_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zones is this downlight suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating from below makes the SpektroLED Evo suitable for bathroom zones 1 and 2 (directly above a bath or shower). The IP20 rating from above means it should not be installed where water can enter from the ceiling void.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I select the wattage and colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting has switches accessible before installation that allow you to choose between 5W and 7W output, and between 2700K, 3000K, 4000K and 6000K colour temperatures. Once the fitting is installed in the ceiling, these settings cannot be changed without removing the downlight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the downlight be installed in contact with loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The fitting is IC rated (insulation contact), meaning it can be covered by loft insulation without overheating. The fire-rating also covers installation in solid timber joists, web joists and I-joists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the antique brass bezel removable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel is fixed and cannot be changed. Other finishes in the SpektroLED Evo range include white, matt black, brushed chrome, polished chrome and brass — use the search function to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723648267,"sku":"SPKEVTAB","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607306_d6a18823-ff87-47f1-aa90-698975f0523b.jpg?v=1714663270"},{"product_id":"spektroled-evo-dimmable-fire-rated-led-downlight-4-cct-fixed-10-pack","title":"SpektroLED Evo Dimmable Fire Rated LED Downlight 4-CCT Fixed (10 Pack)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SpektroLED Evo is a fire-rated LED downlight with selectable wattage (5W or 7W) and four selectable colour temperatures (2700K, 3000K, 4000K, 6000K) controlled by switches under the magnetic bezel. Each fitting houses an integrated SMD LED behind a prismatic diffuser and sits flush in a 70mm ceiling cut-out with a 90mm finished diameter. The pack contains 10 fittings, each supplied with a white bezel. Additional bezel colours are available separately, allowing finish changes without rewiring.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installation where fire rating, IP65 front protection and dimming capability are required, the SpektroLED Evo carries 30\/60\/90-minute fire ratings for solid timber joists, 30-minute ratings for web joists and i-joists, and IC rating for direct contact with loft insulation. The IP65 rating from below makes it suitable for bathrooms, wet rooms and kitchens, while the IP20 rating from above limits it to dry ceiling voids. The fitting connects directly to 230V mains using Knightsbridge's male-female connector system, which allows first-fix cabling to be terminated and hidden until decoration is complete, then plugged into the downlight at second fix.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel housing requires a 43mm minimum void depth and sits 43mm into the ceiling void once installed. The 60-degree beam angle provides general ambient light rather than narrow spotlighting. Switching between 5W and 7W allows the installer to reduce maximum light output where lower illumination is needed or increase it where brighter task lighting is required. Output ranges from 580 lumens at 5W\/2700K to 870 lumens at 7W\/4000K. The fitting is dimmable with trailing-edge dimmers (compatibility should be confirmed before installation). The L70B10 rating of 50,000 hours indicates the LED will maintain 70% of its initial output for approximately 22 years at 6 hours daily use.\u003c\/p\u003e\n\u003cp\u003eThe magnetic bezel clips onto the downlight body after installation, allowing it to be removed for access to the wattage and CCT switches without disturbing the ceiling mounting or wiring. The Class II rating means no earth connection is required. The fitting carries a 5-year warranty and complies with post-2021 energy efficiency standards (Energy Rating Class C). Acoustic rating to ISO 10140-2:2010 limits sound transmission through the ceiling void.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e43 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e43 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e580\/600\/630\/620\/780\/810\/870\/840 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1020 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e144 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174740_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes it suitable for bathroom zones 1 and 2 (outside the shower enclosure but within 60cm of a bath or shower tray). The IP20 rating from above means the ceiling void must remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature changed after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe magnetic bezel clips off without tools, exposing two switches underneath. One switch selects wattage (5W or 7W), the other cycles through the four colour temperatures (2700K, 3000K, 4000K, 6000K). The bezel clips back on after adjustment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 43mm void depth is required. The fitting sits 43mm into the ceiling void and requires a 70mm diameter cut-out. Existing downlight apertures of 60-75mm can usually accommodate the SpektroLED Evo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel colour be changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Knightsbridge offers the SpektroLED Evo bezel in six finishes (sold separately). The magnetic bezel system allows the finish to be changed without rewiring or removing the downlight from the ceiling.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293724303627,"sku":"SPKEVFS10","price":118.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607290_5c29eaa6-bb38-405c-baa0-ff5a97efae5d.jpg?v=1714663286"},{"product_id":"fixed-gu10-fire-rated-downlight-brushed-chrome","title":"Fixed GU10 Fire-Rated Downlight - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge fixed GU10 downlight provides fire-rated ceiling integration with a brushed chrome bezel finish. The pressed steel housing accepts GU10 halogen or LED lamps up to 35W (lamp sold separately) and carries fire ratings of 30, 60 or 90 minutes in solid timber joists, 30 minutes in web-joists, and 30 minutes in I-joists (Staircraft). The fitting installs via a 65mm cut-out and requires a minimum 150mm ceiling void depth.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential new builds, refurbishments and commercial fit-outs where Building Regulations require fire-rated downlights, the fitting uses push-fit terminals for fast installation and supports loop-in\/loop-out wiring for multi-light circuits. The IP20 rating suits dry internal rooms (living rooms, bedrooms, hallways, offices) but not bathrooms or outdoor use. When paired with a maximum 6W LED lamp the fitting is IC-rated, allowing it to be installed in direct contact with loft insulation.\u003c\/p\u003e\n\u003cp\u003eThe brushed chrome bezel sits nearly flush with the ceiling, projecting just 4mm once installed. The fixed lamp holder means the light direction is straight down from the ceiling — there is no tilt or rotation. Dimming capability depends on the GU10 lamp selected; most dimmable GU10 LEDs work with standard trailing-edge dimmers. The 85mm external diameter and low-profile bezel make the fitting visually discreet in white or neutral-toned ceilings.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e65 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3697476_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_329678.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 150mm ceiling void is needed to accommodate the 100mm recessed depth of the fitting plus clearance. The 65mm cut-out diameter determines the hole size in the plasterboard or ceiling material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a GU10 bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. GU10 lamps are sold separately. The fitting accepts halogen lamps up to 35W or LED lamps up to 35W equivalent, with most users choosing 4-6W LED lamps in 2700K-3000K for residential lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 lamp you install. Pair the fitting with a dimmable GU10 LED and a compatible trailing-edge dimmer switch for full dimming functionality. Non-dimmable lamps will operate at fixed brightness only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be installed in contact with loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, when used with a maximum 6W LED lamp the fitting is IC-rated and can be installed in direct contact with thermal insulation. Higher wattage lamps require clearance from insulation to prevent overheating.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294020428043,"sku":"VFCFBC","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/663612_cd9f1ff4-a150-4981-bbad-87d6a6581c56.jpg?v=1714667355"},{"product_id":"fixed-gu10-fire-rated-downlight-chrome","title":"Fixed GU10 Fire-Rated Downlight - Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge VFCFC is a fixed GU10 fire-rated downlight with a chrome bezel, built around a pressed steel housing designed to maintain fire integrity in ceilings for 30, 60 or 90 minutes depending on the substrate. The fitting accepts any standard GU10 bulb up to 35W (sold separately) and provides fast-fix installation via spring clips and push-fit terminals.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential new-build, refurbishment and commercial projects where Building Regulations require fire-rated downlights, the VFCFC suits living rooms, bedrooms, hallways and offices. The 65mm cut-out fits standard ceiling joist spacings and the 150mm minimum void depth accommodates most modern timber-frame and web-joist constructions. The chrome bezel sits 4mm proud of the ceiling surface once fitted, giving a low-profile finish that suits both modern and traditional interiors.\u003c\/p\u003e\n\u003cp\u003eFire-rating certification covers 30\/60\/90 minutes for solid timber joists, 30 minutes for web-joist systems and 30 minutes for I-joist (Staircraft) constructions, meeting UK Building Regulations Part B requirements for compartmentation. The push-fit terminals accept loop-in\/loop-out wiring without requiring a screwdriver, reducing installation time on multi-downlight runs. When fitted with a 6W or lower LED GU10, the fitting carries IC (insulation contact) rating, meaning insulation can be laid directly over the housing without overheating risk.\u003c\/p\u003e\n\u003cp\u003eThe chrome finish provides a neutral metallic accent that pairs with both warm and cool colour schemes. Dimming capability depends on the GU10 bulb chosen — pair with a dimmable LED GU10 and a compatible LED dimmer for variable light output. The IP20 rating limits use to dry internal spaces; for bathrooms and wet zones, see Knightsbridge's IP65-rated alternatives.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e65 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3699117_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_329676.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does this downlight carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe VFCFC is certified for 30\/60\/90 minute fire resistance in solid timber joists, 30 minutes in web-joist systems, and 30 minutes in I-joist (Staircraft) constructions. This meets UK Building Regulations Part B for compartmentation in residential and commercial ceilings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan insulation be placed over the fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, when used with a 6W or lower LED GU10 bulb. The fitting carries IC (insulation contact) rating at this wattage, meaning loft insulation can be laid directly over the housing. Higher-wattage bulbs require a clearance zone around the fitting to prevent overheating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb fitted. Pair the downlight with a dimmable LED GU10 and a compatible LED dimmer for variable light output. Non-dimmable GU10 bulbs will not dim and may flicker or fail if connected to a dimmer circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat void depth is needed above the ceiling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 150mm void depth is required to accommodate the 100mm recessed housing depth plus the required clearance. Measure the void before ordering to confirm compatibility with your ceiling construction.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294020591883,"sku":"VFCFC","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/663616_9955333b-37a8-4ac0-908a-a9a08d3864b5.jpg?v=1714667357"},{"product_id":"ip65-fire-rated-gu10-downlight-brushed-chrome-fixed","title":"IP65 Fire-Rated GU10 Downlight - Brushed Chrome Fixed","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP65 fire-rated GU10 downlight combines sealed moisture protection with structural fire-rating in an 84mm diameter pressed steel housing finished in brushed chrome. The IP65 rating from below protects against water jets and dust ingress, making this downlight suitable for bathrooms, shower rooms and covered outdoor soffits, while the 30\/60\/90-minute fire rating on solid timber joists prevents flame and smoke spread through ceiling voids.\u003c\/p\u003e\n\u003cp\u003eDesigned for new-build and retrofit installation, the downlight uses a fast-fix spring clip system that grips the ceiling aperture without screws, and push-fit terminal blocks allow loop-in\/loop-out wiring without a screwdriver. The 69mm cut-out diameter suits standard holesaw sizes and the 167mm minimum void depth accommodates most UK residential joist spacings. The fixed bezel directs light straight down, making this downlight suitable for general bathroom lighting, hallway runs and kitchen perimeter zones where adjustable spots are not needed.\u003c\/p\u003e\n\u003cp\u003eThe brushed chrome bezel finish provides a neutral metallic accent that pairs with chrome taps, towel rails and cabinet hardware in bathrooms, or with stainless steel appliances in kitchens. The downlight accepts any GU10 halogen or LED lamp up to 35W (sold separately), with dimming performance dependent on the lamp model chosen. The IC rating when paired with a maximum 6W LED lamp allows the fitting to be covered with loft insulation without overheating, reducing thermal bridging in ceiling voids.\u003c\/p\u003e\n\u003cp\u003eFire-rating performance varies by joist construction: 30\/60\/90 minutes on solid timber joists, 30 minutes on web-joists and 30 minutes on I-joists (Staircraft). The IP20 rating from above means the fitting is not sealed against dust or moisture penetration from the ceiling void side, so condensation-prone loft spaces may require additional vapour barrier measures during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e117 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e167 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e69 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3699122_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_329672.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this downlight be used in bathrooms and shower rooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below protects against water jets, making this downlight suitable for Zone 1 and Zone 2 bathroom installation according to BS 7671 wiring regulations. The sealed bezel prevents moisture entering the lamp holder during showering or bathing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire-rating does it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFire-rating varies by joist construction. On solid timber joists the downlight provides 30\/60\/90-minute fire integrity, preventing flame and smoke spread through the ceiling void. On web-joists and I-joists (Staircraft) the rating is 30 minutes. These ratings apply when the downlight is correctly installed according to the manufacturer's instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a GU10 bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. GU10 lamps are sold separately. The downlight accepts any standard GU10 halogen or LED lamp up to 35W maximum. Most users pair this with a 4-6W LED GU10 in warm white (2700K-3000K) for bathroom or hallway lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be covered with loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, but only when fitted with a maximum 6W LED lamp. At this wattage the downlight carries an IC (Insulation Contact) rating, meaning it can be covered with loft insulation without overheating. Using higher-wattage lamps requires a 200mm clearance around the fitting to prevent thermal build-up.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294020788491,"sku":"VFCFIPBC","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/663620_d5c959e1-e85f-4ce3-a671-fcf5b404c1a6.jpg?v=1714667359"},{"product_id":"ip65-fire-rated-gu10-downlight-chrome-fixed","title":"IP65 Fire-Rated GU10 Downlight - Chrome Fixed","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge VFCFIPC is a fixed GU10 downlight with IP65 front protection and fire-rated construction to 30\/60\/90 minutes in solid timber joists, 30 minutes in web-joists and I-joists. The chrome bezel sits 5mm proud of the ceiling surface around a 69mm diameter cut-out, and the pressed steel housing recesses 117mm into the ceiling void with a total minimum void requirement of 167mm.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathroom zones 1 and 2, wet-room ceilings, kitchens prone to steam, and commercial spaces requiring IP65 ingress protection, the downlight uses push-fit terminals for fast installation and supports loop-in\/loop-out wiring. The GU10 lamp holder accepts both LED and halogen bulbs up to 35W (sold separately), with dimming dependent on the bulb type chosen. When fitted with a maximum 6W LED lamp, the fitting is IC-rated for direct contact with insulation.\u003c\/p\u003e\n\u003cp\u003eThe chrome finish is a bright reflective electroplate that pairs with chrome taps, towel rails and accessories in bathrooms, or with brushed and polished chrome kitchen hardware. The 84mm diameter bezel is small enough to fit typical bathroom ceiling grids without crowding adjacent fittings. The fire-rated intumescent seal expands under heat to maintain the ceiling's fire resistance rating where the downlight penetrates it.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e117 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e167 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e69 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3699846_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_329670.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating allows installation in bathroom zones 1 and 2, including directly above a bath or shower enclosure. The IP65 protection is from the front (ceiling side) only — the top of the fitting in the void is IP20.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is fire-rated to 30\/60\/90 minutes in solid timber joists, 30 minutes in web-joists, and 30 minutes in I-joists (Staircraft). The intumescent seal expands under heat to maintain the ceiling's fire resistance where the downlight penetrates it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 167mm void is required to accommodate the 117mm recessed depth of the housing plus clearance above. Measure from the finished ceiling surface to the underside of the floor or roof structure above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb fitted. Dimmable LED GU10 bulbs will dim when paired with a compatible LED dimmer. Non-dimmable bulbs will not respond to a dimmer and may flicker or fail.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294020854027,"sku":"VFCFIPC","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/331830_741edb3f-423b-4f95-95d9-9f375f6ccc00.jpg?v=1714667361"},{"product_id":"ip65-fire-rated-fixed-gu10-downlight-white","title":"IP65 Fire-Rated Fixed GU10 Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP65 fire-rated fixed GU10 downlight combines bathroom-grade water resistance with 30\/60\/90-minute fire protection behind a white pressed-steel bezel. The IP65 rating seals the fitting from below against water jets and dust ingress, making it compliant for use in bathroom zones 1 and 2, while the fire rating meets Building Regulations for ceiling penetrations in solid timber, web-joist and I-joist constructions.\u003c\/p\u003e\n\u003cp\u003eDesigned for new builds and retrofit installation, the downlight requires a 69mm cut-out diameter and a minimum ceiling void depth of 167mm to accommodate the rear housing and fire hood. Push-fit terminals accept loop-in\/loop-out wiring without requiring a screwdriver, speeding installation across multiple fittings. The unit accepts any GU10 halogen or LED bulb up to 35W (sold separately), with dimming capability dependent on the bulb specification rather than the fitting.\u003c\/p\u003e\n\u003cp\u003eThe white finish on the 84mm diameter bezel sits flush with the ceiling surface, projecting only 5mm below the plasterboard or render line once installed. The pressed-steel construction handles the heat dissipation from higher-wattage halogen bulbs, though the fitting also carries IC insulation-contact rating when paired with LED bulbs up to 6W, allowing loft insulation to be packed around the housing without creating a fire risk. Fire certification covers 30-minute protection in web-joist and Staircraft I-joist installations, and extends to 60 and 90 minutes in solid timber ceilings depending on joist depth and specification.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e117 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e167 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e69 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3707042_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_329668.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes the fitting compliant for bathroom zones 1 and 2, including directly above a bath or inside a shower enclosure where water jets are present. The IP20 rating from above means the top of the fitting in the ceiling void is not protected against water ingress, so avoid installation directly below an unlined loft tank or leak-prone area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum void depth of 167mm is needed to accommodate the rear housing and fire hood. The recessed depth of the fitting body itself is 117mm, with the additional 50mm required for the fire protection hood that sits above the housing in the void.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a GU10 bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the bulb is sold separately. The fitting accepts any GU10 halogen or LED bulb up to 35W. Most installations use a 5-7W LED GU10 in warm white (2700K-3000K) for general bathroom or kitchen lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb you fit, not the downlight housing. If you pair the fitting with a dimmable GU10 LED and a compatible dimmer switch, the installation will dim. Non-dimmable bulbs will not respond to a dimmer even if the fitting itself is capable of handling the load.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294021017867,"sku":"VFCFIPW","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/663630_4e9f1cc4-2850-4c06-9b57-115510965ea3.jpg?v=1714667364"},{"product_id":"tilt-gu10-fire-rated-downlight-brushed-chrome","title":"Tilt GU10 Fire-Rated Downlight - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Tilt is a GU10 fire-rated downlight with a 15° tilt mechanism housed behind a brushed chrome bezel. The tiltable lamp holder allows the GU10 bulb (sold separately) to be angled within the ceiling void to direct light onto artwork, feature walls, or specific areas of a room rather than providing only vertical downlight.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial ceiling installation where fire rating is required by Building Regulations, the fitting carries 30\/60\/90-minute fire ratings for solid timber joists, 30-minute rating for web-joist construction, and 30-minute rating for I-joist (Staircraft) ceilings. The 80mm cut-out diameter fits standard ceiling apertures and the 168mm minimum void depth accommodates most UK joist spacings. Push-fit terminals allow loop-in\/loop-out wiring without stripping cable or using external connectors, speeding installation on multi-downlight circuits.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel construction includes an intumescent pad that expands under heat to seal the ceiling aperture in fire conditions, preventing flame and smoke spread between floors. The brushed chrome finish provides a neutral metallic accent that pairs with both warm and cool interior tones. The fitting accepts halogen or LED GU10 bulbs up to 35W, with dimming capability dependent on the chosen bulb. When fitted with a 6W LED or lower, the downlight meets IC (Insulation Contact) rating, allowing ceiling insulation to touch the fitting without creating a fire hazard.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e91 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e88 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e118 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e168 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e15 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3707100_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_329666.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does this downlight carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is rated for 30\/60\/90 minutes on solid timber joists, 30 minutes on web-joist construction, and 30 minutes on I-joist (Staircraft) ceilings. An intumescent pad expands under heat to seal the ceiling aperture and prevent fire spread between floors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 168mm void depth is needed to accommodate the recessed body and allow the tilt mechanism to function. The cut-out diameter is 80mm, fitting standard downlight apertures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used with insulation touching the fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, when fitted with a GU10 LED bulb of 6W or lower. At this wattage the downlight meets IC (Insulation Contact) rating. With higher-wattage bulbs or halogen lamps, a clearance gap between the fitting and insulation is required to prevent overheating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming capability depends on the GU10 bulb you fit. Dimmable LED GU10 bulbs will dim when paired with a compatible dimmer switch; non-dimmable bulbs will not. The fitting itself does not restrict dimming.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294021050635,"sku":"VFCFTBC","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/663634_7a67c3e2-d689-4b2b-a9eb-f5e6ed707c0b.jpg?v=1714667366"},{"product_id":"tilt-gu10-fire-rated-downlight-chrome","title":"Tilt GU10 Fire-Rated Downlight - Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Tilt is a fire-rated GU10 downlight with a 15° tilt mechanism and a chrome bezel. The pressed steel housing carries 30\/60\/90-minute fire ratings in solid timber joists, 30-minute ratings in web-joist and I-joist systems, and recesses 118mm into the ceiling void with an 80mm cut-out diameter. The tilting inner lamp holder allows the GU10 bulb to be angled towards a wall, worktop or focal point rather than pointing straight down.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential new-builds, loft conversions and commercial refits where fire compartmentation is required, the downlight installs using push-fit terminals that accept loop-in\/loop-out wiring without requiring a screwdriver. The fast-fix spring clips grip the ceiling board from inside the void, allowing single-person installation from below without needing access above the ceiling. The 168mm minimum void depth accommodates the tilted lamp holder and the fire-rated insulation barrier built into the housing.\u003c\/p\u003e\n\u003cp\u003eThe chrome bezel sits flush with the ceiling surface, projecting just 5mm, and the 91mm outer diameter gives a compact profile suitable for corridors and kitchens where ceiling space is limited. The downlight accepts any standard GU10 LED or halogen bulb up to 35W (sold separately), with dimming capability determined by the specific bulb chosen. When paired with a 6W LED or lower, the fitting is IC-rated for direct contact with loft insulation without creating a fire risk.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e91 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e88 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e118 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e168 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e15 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3707127_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_329664.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 168mm void depth is needed to accommodate the tilted lamp holder and the fire-rated housing. The fitting recesses 118mm into the void, with the remaining space allowing clearance for the tilt mechanism and thermal insulation barrier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It is rated IP20, so it is for dry rooms only. The IP20 rating means this downlight is not splash-proof.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the 15° tilt allow?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe inner lamp holder tilts up to 15° from vertical, allowing the GU10 bulb to be angled towards a wall, picture, worktop or other focal point rather than pointing straight down. This is useful for wall-washing in corridors or highlighting kitchen worktops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it safe to cover with loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen fitted with a 6W LED bulb or lower, the downlight is IC-rated for direct contact with loft insulation. With higher-wattage bulbs (up to the 35W maximum), a clearance gap must be maintained around the housing to prevent overheating.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294021083403,"sku":"VFCFTC","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/663638_bb125786-3653-4e95-ae55-1c09a50b7832.jpg?v=1714667368"},{"product_id":"tilt-gu10-fire-rated-downlight-white","title":"Tilt GU10 Fire-Rated Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Tilt is a GU10 fire-rated downlight with a 15° tilt mechanism housed in a white pressed steel bezel. The downlight accepts any standard GU10 LED or halogen bulb up to 35W (sold separately) and uses push-fit terminals for mains connection, eliminating the need for a screwdriver during installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial ceiling installation where fire-rated fittings are required by building regulations, the Tilt carries a 30-minute fire rating on web-joists and I-joists, a 60-minute rating on solid timber, and a 90-minute rating on thicker solid timber constructions. The 80mm cut-out diameter fits standard UK downlight apertures, and the 168mm minimum void depth accommodates the upward-projecting lamp holder and terminal block above the ceiling plane.\u003c\/p\u003e\n\u003cp\u003eThe 15° tilt allows the lamp to be angled after installation to direct light onto a specific area rather than straight down, making it useful for highlighting artwork, kitchen worktops, or retail display surfaces. The white bezel sits 5mm proud of the ceiling surface once fitted, creating a defined edge around the aperture. The downlight is IC-rated when paired with a 6W LED lamp, meaning it can be covered by loft insulation without overheating.\u003c\/p\u003e\n\u003cp\u003eThe push-fit terminals support loop-in\/loop-out wiring, allowing multiple downlights to be daisy-chained from a single supply cable run. Dimming capability depends on the GU10 bulb fitted — dimmable LED or halogen bulbs will dim when paired with a compatible mains dimmer switch, while non-dimmable bulbs will not.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e91 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e88 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e118 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e168 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e15 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3707130_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_329662.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 168mm void depth is needed to accommodate the GU10 lamp holder and terminal block above the ceiling surface. The cut-out diameter is 80mm, and the bezel projects 5mm below the ceiling plane once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight is fire-rated for 30 minutes on web-joists and I-joists, 60 minutes on solid timber, and 90 minutes on thicker solid timber constructions. This meets UK building regulations requiring fire-rated downlights in most residential ceiling installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include a bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The downlight accepts any standard GU10 LED or halogen bulb up to 35W, sold separately. Most users pair it with a 4-6W GU10 LED in warm white (2700K-3000K) for general room lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be covered by loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, when used with a 6W LED lamp or lower. The downlight is IC-rated at this wattage, meaning it can be covered by insulation without overheating. Higher-wattage lamps require clearance around the fitting to dissipate heat safely.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294021476619,"sku":"VFCFTW","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/663642_6e2f4738-51bb-4423-89e7-0d0616c10d98.jpg?v=1714667371"},{"product_id":"fixed-gu10-fire-rated-downlight-white","title":"Fixed GU10 Fire-Rated Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge VFCFW is a fixed GU10 fire-rated downlight with a white pressed-steel bezel and a 65mm ceiling cut-out diameter. The fitting carries fire ratings of 30\/60\/90 minutes for solid timber joists, 30 minutes for web-joists, and 30 minutes for I-joists (Staircraft), making it suitable for installation in fire-separation ceilings where Building Regulations require maintained fire integrity. The GU10 lamp holder accepts any standard halogen or LED GU10 bulb up to 35W (lamp sold separately).\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installation where fixed downlighting is needed in fire-rated ceilings, the fitting uses push-fit terminals for loop-in\/loop-out wiring without the need for a terminal block. The fast-fix spring clips secure the downlight into the ceiling void with one-handed installation. The fixed bezel sits flush to the ceiling surface with a 4mm projection and an 85mm outer diameter, giving a discreet profile once fitted. When used with a 6W LED GU10 or lower, the fitting is IC-rated, meaning it can be installed in contact with thermal insulation without causing overheating.\u003c\/p\u003e\n\u003cp\u003eThe white finish blends into white or off-white ceilings, making the fitting almost invisible when the lamp is off. The IP20 rating suits dry indoor environments including living rooms, bedrooms, hallways, offices and commercial spaces, but not bathrooms or kitchens where steam or water spray is present. The minimum void depth required above the ceiling is 150mm to accommodate the 100mm recessed body and the lamp fitting. Dimming capability depends on the GU10 lamp chosen — dimmable LED GU10 lamps allow the fitting to be controlled by a compatible dimmer switch.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e65 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3699121_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_329674.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does fire-rated mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFire-rated downlights are tested to maintain fire integrity through a ceiling for a specified duration. This fitting carries 30\/60\/90 minute ratings for solid timber joists, 30 minutes for web-joists, and 30 minutes for I-joists. Building Regulations often require fire-rated fittings in ceilings that separate different floors or protect escape routes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 150mm void depth above the ceiling surface is required. The fitting itself recesses 100mm into the void, and the GU10 lamp adds further depth depending on the specific bulb used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 lamp you fit. Use a dimmable LED GU10 with a compatible LED dimmer switch to achieve dimming. Non-dimmable GU10 lamps will not dim and may flicker or fail if used with a dimmer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be installed in contact with insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, when used with a 6W LED GU10 lamp or lower. At this wattage the fitting is IC-rated, meaning it can be covered by thermal insulation without overheating. Using a higher-wattage lamp voids the IC rating and requires clearance from insulation.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294021509387,"sku":"VFCFW","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/663662_f0d3574f-2dcf-409e-bf01-080d088cc828.jpg?v=1714667374"},{"product_id":"gu10-fixed-fire-rated-downlight-brass","title":"GU10 Fixed Fire-Rated Downlight - Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge GU10 fixed fire-rated downlight combines a brass-finish bezel with a die-cast pressed steel and aluminium housing designed to maintain fire integrity in ceilings for 30, 60 or 90 minutes depending on substrate. The 72mm cut-out fits standard joists and the integrated intumescent seal expands under heat to close the aperture and prevent fire spread between floors.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial new-build and retrofit projects where Building Regulations Part B fire safety compliance is required, the downlight accepts standard GU10 halogen or LED lamps up to 60mm length and 50W maximum. The insulation-compatible housing allows loft insulation to be laid over the fitting without creating a fire risk or overheating the lamp. The twist-and-lock front bezel allows lamp replacement from below without removing the housing from the ceiling void.\u003c\/p\u003e\n\u003cp\u003eThe brass finish provides a warm metallic accent that suits traditional, classical and warm-toned contemporary interiors. The 87mm bezel diameter and 5mm projection from the ceiling give a low-profile appearance once installed. Spring clips secure the housing into the ceiling void with a recommended maximum ceiling thickness of 30mm, and electrical termination is via a 10A connector block within the rear enclosure with a supplied cord grip for strain relief on the supply cable.\u003c\/p\u003e\n\u003cp\u003eFire testing to BS476 Part 21 and 23 confirms 30\/60\/90 minute integrity on solid timber joists, 30 minutes on web-joists, and 30 minutes on I-joists (Staircraft system). The IP20 rating suits dry internal locations including living rooms, bedrooms, hallways and offices, but not bathrooms or shower rooms where IP44 or higher is required.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e105 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1305656_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800414.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does this downlight carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight is tested to BS476 Part 21 and 23, providing 30\/60\/90 minute fire integrity on solid timber joists, 30 minutes on web-joists, and 30 minutes on I-joists. The intumescent seal expands under heat to close the aperture and prevent fire spread between floors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan insulation be laid over the housing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The housing is insulation-compatible, meaning loft insulation can be laid directly over the fitting without creating overheating or fire risk. This is a Building Regulations requirement in many loft conversions and new builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a GU10 bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The downlight accepts any standard GU10 halogen or LED lamp up to 60mm length and 50W maximum. GU10 LED bulbs are sold separately at Niori and most users pair this with a 5-7W warm white LED.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bezel adjustable or fixed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFixed. The bezel does not tilt or rotate once installed. The lamp direction is vertically downwards from the ceiling plane. For adjustable fire-rated downlights, see the Knightsbridge tilt range.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294021574923,"sku":"VFRDGICB","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/100930_52133af2-9cfb-4a63-9adc-eded693b78d6.jpg?v=1714667376"},{"product_id":"gu10-fixed-fire-rated-downlight-chrome","title":"GU10 Fixed Fire-Rated Downlight - Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge VFRDGICC is a fixed GU10 fire-rated downlight with a chrome bezel and die-cast housing, certified to BS476 Part 21 \u0026amp; 23 for 30\/60\/90-minute fire protection in solid timber joists and 30 minutes in web-joist and I-joist constructions. The fitting takes standard GU10 halogen or LED bulbs up to 50W and 60mm in length, with a twist-and-lock front ring that allows bulb changes without removing the bezel.\u003c\/p\u003e\n\u003cp\u003eDesigned for new-build and retrofit residential installations where Building Regulations Part B fire safety compliance is required, the downlight suits hallways, landings, bedrooms and living rooms with ceiling void access. The 72mm cut-out and spring-clip fixings accommodate ceiling thicknesses up to 30mm. The housing is insulation-compatible, allowing loft insulation to be laid over the fitting without creating a fire hazard or overheating risk.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel and aluminium construction provides structural integrity under fire conditions while keeping the overall weight manageable for ceiling installation. The chrome finish on the bezel coordinates with modern switch plates and door furniture. The IP20 rating makes the fitting suitable for general interior use but not for bathrooms or outdoor applications. Electrical connection is via a 10A connector block within a secure back-box enclosure, supplied with a cable grip for strain relief.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e105 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1305989_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800416.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does fire-rated mean for a downlight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFire-rated downlights are tested to maintain the integrity of a ceiling's fire barrier when installed. This fitting is certified to BS476 Parts 21 \u0026amp; 23, providing 30\/60\/90-minute fire protection in solid timber joists and 30 minutes in web-joist and I-joist constructions. It prevents fire spreading through the ceiling void where the light is fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used with LED GU10 bulbs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The fitting accepts standard GU10 halogen or LED bulbs up to 50W and 60mm in length. Most LED GU10s are 6-8W and well within the dimensional and wattage limits. Dimming capability depends on the bulb chosen — pair with a dimmable GU10 and appropriate dimmer switch if dimming is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling thickness does it accommodate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe spring-clip fixings are designed for ceiling thicknesses up to 30mm. Thicker ceilings may require additional support or alternative fixing methods. The recessed depth is 105mm, so adequate void space above the ceiling is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it safe to cover with loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The fitting is insulation-compatible, meaning loft insulation can be laid over the housing without creating a fire risk or causing the fitting to overheat. This is a key requirement for downlights installed in ceilings below insulated loft spaces.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294021607691,"sku":"VFRDGICC","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/100932_75287a6b-0ec2-47aa-b034-3a6e6da65724.jpg?v=1714667378"},{"product_id":"gu10-fire-rated-fixed-downlight-brushed-chrome","title":"GU10 Fire-Rated Fixed Downlight - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge fire-rated fixed downlight accepts a GU10 halogen or LED bulb (sold separately) behind a brushed chrome bezel and is built to meet Building Regulations Part B fire safety requirements. The die-cast housing carries a 30\/60\/90 minute fire rating for solid timber joists, 30 minutes for web joists and 30 minutes for I-joists, tested to BS476 Part 21 and Part 23. The fitting is insulation compatible, meaning loft insulation can be laid directly over the fitting without creating a fire risk or overheating.\u003c\/p\u003e\n\u003cp\u003eDesigned for new-build and refurbishment projects where fire-rated ceilings are required by Building Control, the downlight installs into a 72mm ceiling cut-out and requires 105mm recessed depth above the ceiling. The front bezel projects 5mm below the ceiling line once fitted. Spring clips on the housing grip ceilings up to 30mm thick, and a twist-lock front ring allows the GU10 bulb to be replaced from below without removing the fitting from the ceiling. The IP20 rating limits the downlight to dry indoor locations only.\u003c\/p\u003e\n\u003cp\u003eThe brushed chrome finish provides a satin metallic appearance that reduces glare under direct light and pairs with both contemporary and traditional interiors. The fitting accepts GU10 halogen bulbs up to 50W or retrofit LED and CFL bulbs up to 60mm in length, giving flexibility to choose the light output, colour temperature and energy efficiency that suits the room. Electrical termination is via a 10A connector block inside the housing, with an integral cord grip securing the cable entry. The housing is constructed from pressed steel and aluminium for durability and heat dissipation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e105 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306050_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800418.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does fire-rated mean for a downlight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA fire-rated downlight is designed to maintain the fire resistance of a ceiling when a hole is cut for the fitting. This downlight carries a 30\/60\/90 minute fire rating for solid timber joists, tested to BS476 Part 21 and Part 23, and meets Building Regulations Part B requirements. The rating means that in the event of a fire, the fitting will not allow flames or heat to pass through the ceiling void for the rated period.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan insulation be laid over the fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The downlight is insulation compatible, meaning loft insulation can be laid directly over the housing without creating a fire risk or causing the fitting to overheat. This is required by Building Regulations in most new-build and refurbishment projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight accepts a standard GU10 bulb (sold separately) up to 50W for halogen or any retrofit LED or CFL bulb up to 60mm in length. Most users fit a GU10 LED bulb between 4-7W and 2700K-4000K depending on the room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling depth is needed above the fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires 105mm of recessed depth above the ceiling. The 72mm cut-out diameter is made in the ceiling surface, and the fitting sits 5mm proud of the ceiling once installed. Spring clips on the housing accommodate ceiling thicknesses up to 30mm.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294022131979,"sku":"VFRDGICCBR","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/100934_e5153a1c-7849-42a3-a682-982cfce69728.jpg?v=1714667381"},{"product_id":"gu10-fixed-fire-rated-downlight-white-die-cast","title":"GU10 Fixed Fire-Rated Downlight - White Die-Cast","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge VFRDGICW is a fixed fire-rated downlight with a GU10 lampholder, white die-cast bezel and a 72mm ceiling cut-out. The fitting carries a 30\/60\/90-minute fire rating when installed in solid timber ceilings, and 30-minute rating in web-joist and I-joist constructions, tested to BS476 Part 21 \u0026amp; 23 and compliant with Building Regulations Part B. The fixed bezel means the light direction is locked downward, making it suited to general room lighting rather than directional highlighting.\u003c\/p\u003e\n\u003cp\u003eDesigned for new-build residential, commercial and hospitality projects where Building Control requires fire-rated ceiling penetrations, the downlight accepts standard GU10 halogen bulbs up to 50W or retrofit LED and CFL lamps up to 60mm in length. The twist-and-lock front ring allows bulb replacement from below without accessing the ceiling void. The fitting is insulation compatible, so loft insulation can sit directly over the housing without creating a fire risk or overheating the lamp. Electrical termination is via a 10A connector block inside a secure enclosure with cord grip.\u003c\/p\u003e\n\u003cp\u003eThe die-cast construction combines pressed steel and aluminium for rigidity and heat dissipation. Spring clips fix the housing into the ceiling with a recommended maximum ceiling thickness of 30mm. The white powder-coat finish on the bezel blends into white ceilings or provides a defined accent on coloured ceilings. The IP20 rating means the fitting is suitable for dry indoor locations but not bathrooms or zones subject to direct water ingress. The 87mm diameter bezel and 5mm projection give a low-profile finish once installed.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e105 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306062_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800430.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does this downlight carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is rated for 30\/60\/90 minutes in solid timber ceilings and 30 minutes in web-joist and I-joist constructions. It has been tested to BS476 Part 21 \u0026amp; 23 and meets Building Regulations Part B fire safety requirements.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan insulation sit directly on top of the housing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The fitting is insulation compatible, so loft insulation can sit directly over the housing without creating a fire risk or causing the lamp to overheat.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take and is one included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight takes a GU10 bulb up to 50W (halogen) or any retrofit LED or CFL lamp up to 60mm in length. Bulbs are not included and must be purchased separately.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the fitting is suitable for dry indoor locations only, not bathrooms or areas subject to direct water contact or moisture ingress.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294022164747,"sku":"VFRDGICW","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/100936_e667a5ca-4cb4-43e4-9fc5-04108bee7562.jpg?v=1714667383"},{"product_id":"fire-rated-tilt-downlight-gu10-brass","title":"Fire-Rated Tilt Downlight GU10 - Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge VFRSGICB is a fire-rated tilt downlight with a GU10 socket, cast in pressed steel and aluminium with a brass finish. The fitting tilts 15 degrees from centre, allowing light to be directed towards a wall, artwork or architectural detail rather than straight down. The fire-rated housing meets BS476 Part 21 \u0026amp; 23 and Building Regulations Part B, tested to 30\/60\/90-minute fire resistance in solid timber ceilings and 30 minutes in web-joist and I-joist constructions.\u003c\/p\u003e\n\u003cp\u003eDesigned for ceiling installation in residential, hospitality and commercial spaces, the downlight fits an 84mm cut-out and requires 105mm of ceiling void depth. The insulation-compatible housing allows loft insulation to be packed directly against the fitting without creating a fire risk or overheating. The twist-and-lock bezel at the front allows GU10 bulbs to be changed from below without removing the fitting from the ceiling. Spring clips secure the fitting to ceiling thicknesses up to 30mm.\u003c\/p\u003e\n\u003cp\u003eThe brass finish provides a warm metallic accent that works in traditional, classical and warm-toned contemporary interiors. The fitting accepts any standard GU10 bulb up to 50W and 60mm in length, including halogen, LED and CFL retrofit bulbs (sold separately). Electrical termination is via a 10A connector block inside the secure housing, supplied with cord grip for strain relief. The IP20 rating restricts use to dry indoor spaces — not suitable for bathrooms, wet rooms or outdoor installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e101 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e105 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e15 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306076_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800428.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does fire-rated mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFire-rated downlights are tested to maintain the fire resistance of the ceiling they're installed into. This fitting meets BS476 Part 21 \u0026amp; 23 and provides 30\/60\/90-minute fire resistance in solid timber ceilings, and 30 minutes in web-joist and I-joist constructions. It's compliant with Building Regulations Part B (Fire Safety), making it suitable for installation in homes, commercial buildings and HMOs where fire resistance is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan insulation touch the housing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The fitting is rated as insulation-compatible, meaning loft insulation can be packed directly against the housing without creating a fire risk or causing the fitting to overheat. This is essential in modern well-insulated properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take and is it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes any standard GU10 bulb up to 50W and 60mm in length. Bulbs are sold separately. Dimming depends on the bulb — if you install a dimmable GU10 LED and pair it with a compatible dimmer switch, the fitting will dim. Non-dimmable bulbs will not dim regardless of the switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires 105mm of ceiling void depth above the plasterboard. The cut-out diameter is 84mm and the fitting projects 5mm below the ceiling once installed. Maximum ceiling thickness is 30mm for the spring clips to grip securely.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294022721803,"sku":"VFRSGICB","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/101062_3fbae590-dc7b-401c-ab44-91eb370fd76e.jpg?v=1714667385"},{"product_id":"gu10-fire-rated-tilt-downlight-chrome","title":"GU10 Fire-Rated Tilt Downlight - Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge GU10 fire-rated tilt downlight combines a 15-degree tiltable lamp holder with a 30\/60\/90-minute fire rating tested to BS476 Part 21 and 23. The chrome-finished pressed steel and aluminium housing fits an 84mm ceiling cut-out and accepts standard GU10 halogen or LED lamps up to 50W and 60mm in length. A twist-and-lock front ring allows lamp changes without removing the fitting from the ceiling.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installation where Building Regulations Part B fire safety compliance is required, the downlight is insulation compatible and can be covered with loft insulation without overheating. The 15-degree tilt allows the beam to be directed towards artwork, architectural features, or the edge of a room rather than straight down. Spring clips fix the fitting into the ceiling void, suitable for ceiling thicknesses up to 30mm including plasterboard on joists, solid timber, web-joist and I-joist constructions.\u003c\/p\u003e\n\u003cp\u003eThe chrome finish on the visible front bezel provides a neutral metallic accent that pairs with both warm and cool-toned interiors. The die-cast construction gives the housing rigidity under heat cycles from halogen lamps, and the intumescent seal around the lamp aperture expands under fire conditions to maintain the ceiling's fire integrity. Electrical termination uses a 10A connector block inside a secure enclosure with cord grip, compatible with standard UK ring main wiring.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e101 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e105 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e15 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306097_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800420.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does fire-rated mean for a downlight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFire-rated downlights contain an intumescent seal that expands under heat to close the lamp aperture during a fire, maintaining the ceiling's fire integrity. This fitting is tested to BS476 Part 21 and 23 and carries 30\/60\/90-minute ratings for solid timber ceilings, and 30-minute ratings for web-joist and I-joist constructions, making it compliant with Building Regulations Part B.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be covered with loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The fitting is insulation compatible and can be covered with loft insulation without overheating. The die-cast housing dissipates heat from the lamp effectively even when surrounded by insulation material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight takes a standard GU10 bulb up to 50W and 60mm in length. GU10 halogen and LED lamps are both compatible. Bulbs are sold separately. Dimming depends on the specific bulb used — pair with a dimmable GU10 LED if dimming is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the tilt adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnce the fitting is installed in the ceiling, the lamp holder tilts up to 15 degrees within the housing. This allows the beam to be directed towards a wall, artwork, or architectural feature rather than straight down. The angle is set by hand after the lamp is fitted.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294022754571,"sku":"VFRSGICC","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/101024_409bd37b-51cd-4762-8222-c5cdeaa74ae2.jpg?v=1714667387"},{"product_id":"fire-rated-tilt-downlight-gu10-brushed-chrome","title":"Fire-Rated Tilt Downlight GU10 - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge fire-rated tilt downlight is a GU10 recessed fitting with a 15° tilt mechanism housed in a brushed chrome bezel. The die-cast housing is certified to BS476 Parts 21 and 23, providing 30\/60\/90-minute fire protection on solid timber joists, 30 minutes on web-joist and 30 minutes on I-joist constructions. The tilt mechanism allows the beam to be angled after installation to direct light onto artwork, shelving or architectural features rather than straight down.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial ceilings up to 30mm thick, the fitting accepts any standard GU10 halogen, LED or CFL lamp up to 60mm in length and 50W output. The front bezel uses a twist-and-lock ring that releases without tools, allowing lamp changes without removing the fitting from the ceiling void. The insulation-compatible housing can be covered directly with loft insulation without creating a fire risk or overheating, making it suitable for Building Regulations Part L compliance in new-build and retrofit projects.\u003c\/p\u003e\n\u003cp\u003eThe brushed chrome finish provides a neutral metallic tone that pairs with both warm and cool interior schemes. The 84mm cut-out diameter and 105mm recessed depth fit standard ceiling voids without requiring oversized holes or excessive clearance above the plasterboard. Electrical connection is via a 10A connector block inside a secure enclosure with a cord grip, eliminating the need for junction boxes in most installations. Dimming capability depends on the chosen GU10 lamp — most LED GU10s are compatible with trailing-edge dimmers.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e101 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e105 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e15 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306111_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800422.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does fire-rated mean for a downlight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFire-rated downlights are tested to BS476 standards and certified to maintain the fire resistance of the ceiling they're installed into. This fitting provides 30, 60 or 90 minutes of protection on solid timber joists, and 30 minutes on web-joist and I-joist constructions. The intumescent seal expands under heat to close the aperture and prevent fire spread through the ceiling void.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cover this with loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The fitting is insulation-compatible and can be covered directly with loft insulation without creating a fire risk or causing the lamp to overheat. This is required for Building Regulations Part L compliance in many new-build and conversion projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the lamp?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brushed chrome front bezel twists anti-clockwise to release, allowing the GU10 lamp to be accessed and replaced without removing the fitting from the ceiling. Once the new lamp is fitted, the bezel twists back into the locked position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming capability depends on the GU10 lamp you install. Most LED GU10 lamps are compatible with trailing-edge dimmers, but check the lamp packaging or specifications before pairing with a dimmer switch.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294023049483,"sku":"VFRSGICCBR","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/100938_d43cd3bd-0543-4d1e-8269-6a20fe920e5a.jpg?v=1714667390"},{"product_id":"fire-rated-gu10-tilt-downlight-white","title":"Fire-Rated GU10 Tilt Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge fire-rated tilt downlight is a recessed GU10 fitting built for ceiling installations where fire safety compliance is required. The housing combines pressed steel and aluminium construction with intumescent seals tested to BS476 Part 21 \u0026amp; 23, providing 30\/60\/90 minute fire rating in solid timber ceilings and 30 minute rating in web-joist and I-joist constructions. The white front bezel tilts up to 15 degrees from vertical, allowing the GU10 lamp to be angled towards walls, artwork or seating positions rather than firing straight down.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential refurbishment, new builds under Building Regulations Part B, and commercial installations needing fire compartmentalisation, the downlight fits an 84mm ceiling cut-out with spring clip fixings that accommodate ceiling thicknesses up to 30mm. The insulation-compatible housing allows loft insulation to be pushed against the rear without overheating risk. Electrical termination uses a 10A connector block inside a secure enclosure with cord grip, compatible with standard fixed wiring.\u003c\/p\u003e\n\u003cp\u003eThe twist-and-lock front ring allows GU10 lamps to be changed without removing the entire fitting from the ceiling. The housing accepts standard GU10 halogen lamps up to 50W and retrofit LED or CFL lamps up to 60mm in length, making it compatible with most current GU10 LED bulbs rated between 3-7W. Dimming capability depends on the lamp fitted — most GU10 LED lamps now support standard phase-dimming when paired with LED-compatible dimmers.\u003c\/p\u003e\n\u003cp\u003eThe white powder-coat finish on the bezel blends into white or off-white ceilings without creating a visual interruption. The 5mm projection from ceiling to bezel face keeps the fitting low-profile once installed. The IP20 rating makes the downlight suitable for dry interior spaces including living rooms, bedrooms, hallways and offices, but not bathrooms or outdoor covered areas which require IP44 or higher.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e101 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e105 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e15 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306121_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800426.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does this downlight carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is tested to BS476 Part 21 \u0026amp; 23 and provides 30\/60\/90 minute fire rating in solid timber ceilings, 30 minute rating in web-joist constructions, and 30 minute rating in I-joist (Staircraft) ceilings. It complies with Building Regulations Part B (Fire Safety) for UK installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan insulation touch the housing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The housing is insulation-compatible, meaning loft insulation can be pushed against the rear and sides without creating overheating or fire risk. This is essential for maintaining thermal performance in insulated ceilings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat GU10 bulbs fit this downlight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting accepts standard GU10 halogen lamps up to 50W and retrofit GU10 LED or CFL lamps up to 60mm in length. Most current GU10 LED bulbs (typically 3-7W) fit comfortably within the 60mm length limit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 lamp fitted. If you install a dimmable GU10 LED lamp and pair it with an LED-compatible dimmer, the fitting will dim. The housing itself does not restrict dimming — it's purely lamp-dependent.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294023639307,"sku":"VFRSGICW","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/101026_526b8824-71e3-49d5-bdad-676a58a42b52.jpg?v=1714667392"},{"product_id":"fire-rated-ip65-gu10-shower-downlight-brass","title":"Fire-Rated IP65 GU10 Shower Downlight - Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge fire-rated IP65 shower downlight is a GU10 recessed fitting with a brass bezel, built for wet zones and fire compartment ceilings. The IP65 rating on the front face allows installation in bathroom zones 1 and 2 where direct water spray is present, while the IP20 rating from above permits insulation to rest directly against the fitting's back box without overheating risk.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential bathrooms, shower rooms and wet zones in commercial settings, the fitting meets Building Regulations Part B and is tested to BS476 Parts 21 and 23 for fire integrity. It achieves 30-minute fire resistance in web-joist and I-joist ceilings, 60-minute in solid timber, and 90-minute in standard solid timber constructions. The 70mm cut-out diameter suits standard ceiling joist spacing and the 118mm recessed depth fits typical void depths above plasterboard ceilings.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium and pressed steel construction gives the fitting structural rigidity for repeated lamp changes. A twist-and-lock front ring secures the GU10 bulb in place and the brass finish provides a warm metallic accent that pairs with brass taps, towel rails and traditional bathroom fittings. Electrical termination is via a 10A connector block within a secure enclosure with cord grip, and spring clips fix the unit to the ceiling with a recommended maximum plasterboard thickness of 30mm. The fitting accepts GU10 halogen, LED or CFL bulbs up to 35W (sold separately), with dimmability depending on the bulb chosen.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e118 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306127_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800424.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom shower cubicle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 front face rating permits installation in bathroom zones 1 and 2 where direct water spray is present, making it suitable for fitting directly above or adjacent to a shower head.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is tested to BS476 Parts 21 and 23 and meets Building Regulations Part B. It achieves 30-minute fire resistance in web-joist and I-joist ceilings, 60-minute in solid timber, and 90-minute in standard solid timber constructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan insulation touch the back of the fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The fitting is insulation-compatible with an IP20 rating from above, meaning loft insulation can rest directly against the back box without causing overheating or voiding the fire rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb you fit. Pair with a dimmable GU10 LED and a compatible dimmer switch to achieve dimming. The fitting itself does not restrict dimmer compatibility.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294023672075,"sku":"VFRSHGICB","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/101046_30c647c5-cce5-4194-86b5-aa35de4580d1.jpg?v=1714667394"},{"product_id":"fire-rated-ip65-shower-downlight-gu10-chrome","title":"Fire-Rated IP65 Shower Downlight GU10 - Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge VFRSHGICC is a fire-rated IP65 shower downlight with a chrome bezel, pressed steel housing and a GU10 lamp fitting. The IP65 rating from below makes it suitable for bathroom zones 1 and 2, while the fire-rated construction provides 30\/60\/90 minute protection in solid timber ceilings, 30 minutes in web-joist construction and 30 minutes in I-joist installations.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, shower rooms and wet-room ceilings where both moisture protection and fire safety are required by Building Regulations, the downlight fits a 70mm ceiling cut-out and requires 118mm recessed depth above the ceiling line. The twist-and-lock front ring secures the GU10 lamp without tools and the spring clip fixings accommodate ceiling thicknesses up to 30mm. The insulation-compatible housing allows loft insulation to be laid directly over the fitting without creating a clearance gap.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel and aluminium housing with integrated intumescent padding meets BS476 Part 21 and 23 fire safety standards and complies with Building Regulations Part B. Electrical termination is via a 10A connector block inside a secure enclosure with cord grip, requiring earth connection (Class I). The chrome bezel projects 7mm below the ceiling surface once installed and accepts any GU10 halogen, LED or CFL lamp up to 35W. Dimmability depends on the lamp chosen.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e118 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306137_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800434.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a shower cubicle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes it suitable for bathroom zone 1 (directly above a bath or shower) and zone 2 (within 600mm of a bath or shower). The rating from above is IP20, so the ceiling void must remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires 118mm recessed depth above the ceiling line and a 70mm cut-out diameter. The spring clips accommodate ceiling thicknesses up to 30mm. Check your ceiling void depth before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a GU10 lamp?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The lamp is sold separately. The fitting accepts any GU10 halogen, LED or CFL lamp up to 35W. Most installations now use GU10 LED lamps between 4-7W for lower running costs and heat output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 lamp you choose. If you install a dimmable GU10 LED, the fitting will dim when paired with a compatible LED dimmer switch. Non-dimmable GU10 lamps will not dim regardless of the switch.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294023704843,"sku":"VFRSHGICC","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/101044_f58dc8a0-2b2d-448b-af2c-a28d459ffcb7.jpg?v=1714667396"},{"product_id":"fire-rated-shower-downlight-ip65-gu10-brushed-chrome","title":"Fire-Rated Shower Downlight IP65 GU10 - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge fire-rated shower downlight is a fixed GU10 recessed fitting rated IP65 from below and IP20 from above, with a die-cast pressed steel and aluminium body and a brushed chrome front bezel. The fitting is fire-rated to 30\/60\/90 minutes in solid timber joists, 30 minutes in web-joists and 30 minutes in I-joists (Staircraft), tested to BS476 Part 21 \u0026amp; 23 and compliant with Building Regulations Part B (Fire Safety).\u003c\/p\u003e\n\u003cp\u003eDesigned for bathroom zones 1 and 2, shower enclosures, wet rooms and outdoor soffits where water ingress and fire containment are both required, the fitting requires a 70mm cut-out hole and projects 7mm below the ceiling line when installed. The recessed depth of 118mm fits between standard 150mm joist centres and the fitting is insulation compatible, meaning loft insulation can be laid directly over the housing without causing overheating or voiding the fire rating.\u003c\/p\u003e\n\u003cp\u003eThe GU10 lamp holder accepts halogen, LED or CFL GU10 bulbs up to 35W (sold separately) and the fitting is dimmable depending on the bulb used. Electrical connection is via a 10A connector block inside a secure enclosure with a cord grip for strain relief. The brushed chrome bezel uses a twist-and-lock ring to hold the lamp in place and provides a low-sheen metallic finish that pairs well with chrome taps, shower fittings and bathroom accessories. Spring clips secure the fitting into the ceiling void and are rated for ceiling thicknesses up to 30mm.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e118 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306140_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800436.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP65 mean and which bathroom zones is this suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 means the fitting is protected against water jets from any direction. This makes it suitable for bathroom zones 1 and 2, including directly above a bath or inside a shower enclosure. From above (in the ceiling void) the fitting is rated IP20, so it should not be installed where the ceiling void itself is exposed to water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does fire-rated mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFire-rated downlights contain an intumescent pad that expands when exposed to heat, sealing the cut-out hole to prevent fire spreading from the room below into the ceiling void. This fitting is rated to 30\/60\/90 minutes in solid timber joists, 30 minutes in web-joists and 30 minutes in I-joists, and is compliant with Building Regulations Part B (Fire Safety).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The fitting accepts any standard GU10 halogen, LED or CFL bulb up to 35W. Most users pair it with a 5-7W GU10 LED in warm white (2700K-3000K) for bathroom lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting itself is dimmable, but dimmer compatibility depends on the GU10 bulb you fit. Use a dimmable GU10 LED or halogen bulb and pair it with a compatible trailing-edge dimmer.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294023934219,"sku":"VFRSHGICCBR","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/101042_77059b8d-f4f8-4592-b09c-9ed07936783f.jpg?v=1714667399"},{"product_id":"ip65-fire-rated-shower-downlight-gu10-white","title":"IP65 Fire-Rated Shower Downlight GU10 - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP65 fire-rated shower downlight is a die-cast recessed fitting designed for wet zones in bathrooms, shower rooms and utility areas. The GU10 socket accepts halogen, LED or CFL bulbs up to 35W (sold separately), and the IP65 front bezel protects against water jets from any direction. The fitting carries 30\/60\/90-minute fire ratings for solid timber construction, 30-minute for web-joist and I-joist installations, tested to BS476 Part 21 \u0026amp; 23 and compliant with Building Regulations Part B.\u003c\/p\u003e\n\u003cp\u003eInstallation requires a 70mm ceiling cut-out and 118mm recessed depth above the ceiling line. The fitting is insulation compatible, allowing loft insulation to be laid over the housing without creating a fire risk or overheating the lamp. Spring clips hold the housing in the ceiling with a maximum recommended ceiling thickness of 30mm. The front bezel uses a twist-and-lock ring to secure the lamp, which allows bulb changes without removing the bezel or disturbing the ceiling cut-out.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel and aluminium construction provides structural integrity for fire-rated performance while keeping the fitting light enough for plasterboard installation. The white powder-coat finish on the bezel sits flush with ceilings and matches standard white emulsion tones. Electrical connection is made via a 10A connector block inside the housing with a cord grip for cable strain relief. The fitting is Class I and must be earthed. Dimming capability depends on the bulb chosen — most GU10 LED bulbs are dimmable when paired with a compatible LED dimmer.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e118 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306187_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800432.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathroom shower zones?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating means the front bezel is protected against water jets, making it suitable for Zone 1 and Zone 2 in bathrooms (directly above a shower or bath). The IP20 rating from above means the housing is not protected against water ingress from the loft side, so it should not be installed where water can reach the top of the housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling depth is needed for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires 118mm of recessed depth above the ceiling and a 70mm diameter cut-out through the ceiling material. The spring clips are designed for ceiling thicknesses up to 30mm, which covers standard plasterboard on timber joists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming capability depends on the GU10 bulb installed. Most GU10 LED bulbs are dimmable when paired with a compatible LED dimmer switch. Halogen GU10 bulbs are dimmable with standard resistive or trailing-edge dimmers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. GU10 bulbs are sold separately. The fitting accepts GU10 halogen, LED or CFL bulbs up to 35W. For bathroom use, a warm-white LED GU10 between 4-6W and 2700K-3000K is typical.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294024491275,"sku":"VFRSHGICW","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/101040_dd7a4c38-7b50-48f3-8b6b-1b653bfc5757.jpg?v=1714667401"},{"product_id":"fire-rated-led-dimmable-downlight-6w-4000k-white","title":"Fire-Rated LED Dimmable Downlight 6W 4000K - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge RW6CW is a 6W fire-rated LED downlight with an integrated driver, delivering 690 lumens of 4000K cool white light through a 40° beam angle. The white aluminium and polycarbonate construction carries an IP65 rating on the front face (IP20 from above), making it suitable for bathrooms, kitchens and zones requiring moisture protection. Fire testing to 30\/60\/90 minutes with solid wood joists meets Building Regulations for ceiling penetrations.\u003c\/p\u003e\n\u003cp\u003eDesigned for recessed installation in ceilings with a minimum 120mm void depth, the downlight requires a 72mm cut-out and projects just 7mm below the ceiling line once fitted. The integrated driver sits in the purple thermally-rated housing above the ceiling, with loop-in\/loop-out terminal blocks allowing daisy-chain wiring across multiple fittings. Push-fit terminals speed installation and the interchangeable white bezel can be swapped for alternative finishes if required.\u003c\/p\u003e\n\u003cp\u003eThe 4000K colour temperature produces a neutral cool white light suited to task lighting in kitchens, utility rooms, hallways and commercial spaces where clarity matters more than warmth. The downlight is dimmable with compatible leading-edge and trailing-edge dimmers — check dimmer compatibility before pairing. The L70B50 rating of 54,000 hours indicates the point at which 50% of tested units maintain 70% of initial output, translating to approximately 24 years at 6 hours per day use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e67mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e72mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium \u0026amp; polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e54000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e4000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCool White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e690lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light source only)\u003c\/td\u003e\n\u003ctd\u003e990lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e6W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy (Light source)\u003c\/td\u003e\n\u003ctd\u003e164.88lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-RW6CW.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 120mm void depth is needed above the ceiling to accommodate the 67mm recessed depth of the fitting plus the driver housing. The 72mm cut-out diameter determines the hole size in the plasterboard or ceiling material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for bathroom zones?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating on the front face meets requirements for bathroom zones 1 and 2 (above the bath\/shower). Note the IP20 rating from above means the void space above the ceiling must not be subject to water ingress.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the fire rating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight is tested and rated for 30, 60 and 90 minute fire resistance when installed in ceilings with solid wood joists, meeting Part B Building Regulations for fire-rated ceiling penetrations in UK residential and commercial buildings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple downlights be wired together?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The integrated driver includes loop-in\/loop-out terminal blocks with push-fit connectors, allowing multiple downlights to be daisy-chained from a single feed circuit without needing junction boxes at each fitting.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391563628811,"sku":"RW6CW","price":6.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/158746_1e48aa55-361d-4d7c-9ed4-2a0343a81484.jpg?v=1747061778"},{"product_id":"fire-rated-dimmable-led-downlight-5w-3000k-white","title":"Fire-Rated Dimmable LED Downlight 5W 3000K - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge RW5WW is a fire-rated LED downlight with an integrated 5W LED module delivering 565 lumens at 3000K warm white through a clear polycarbonate diffuser. The fitting carries an IP65 rating from below, making it suitable for bathrooms and wet rooms, and has been tested to 30, 60 and 90 minute fire protection standards when installed in solid wood joists.\u003c\/p\u003e\n\u003cp\u003eDesigned for low-ceiling installations where void depth is limited, the fitting requires a 72mm cut-out and a minimum 120mm void above the ceiling surface. The integrated driver and loop-in\/loop-out terminals allow multiple downlights to be wired in series without needing separate driver boxes, and the push-fit terminal connectors speed up installation. The fitting projects just 6mm below the ceiling when fitted, with an 85mm white bezel sitting flush with the plasterwork.\u003c\/p\u003e\n\u003cp\u003eThe aluminium and polycarbonate construction houses an SMD LED module with a 45-degree beam angle, providing focused light over a 1-1.2m diameter area when ceiling-mounted at standard 2.4m height. The LED is rated to L70B50 at 54,000 hours, meaning it retains 70% of initial output after approximately six years of continuous operation. The fitting is dimmable when paired with trailing-edge dimmers — compatibility should be checked before specifying a dimmer model, as not all trailing-edge units support low-wattage LED loads.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\" style=\"width: 100.036%; height: 490px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003e85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eProjection\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003e67mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eMinimum Void\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003e120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003e72mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003eAluminium \u0026amp; polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eIP Rating\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eClass\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eDiffuser\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eLamp Technology\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eLamp Included\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eDimmable\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eL70B50\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003e54000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eBeam Angle\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003e45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eCCT\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003e3000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eLight Colour\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003eWarm White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eLumens\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003e565lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eLumens (Light source only)\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003e810lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003e5W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eEfficacy (Light source)\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003e148.9lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eCRI\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.4029%; height: 19.6px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"width: 43.1373%; height: 19.6px;\"\u003e3 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-RW5WW.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this downlight be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes it suitable for bathroom zones 1 and 2 when installed according to IET Wiring Regulations. The fitting is IP20 from above, so the void space above the ceiling must remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat void depth is required above the ceiling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 120mm void is required to accommodate the 67mm recessed depth of the fitting plus clearance for the spring clips and thermal dissipation. Shallower voids cannot safely accommodate fire-rated downlights.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with all dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is dimmable but requires a trailing-edge LED-compatible dimmer. Not all trailing-edge dimmers support 5W loads, so check the dimmer specification before pairing. Leading-edge dimmers are not recommended for LED downlights.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many downlights are needed for a typical bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor a 2m x 2m bathroom, two to three RW5WW downlights provide sufficient general lighting. Spacing them 1.2-1.5m apart gives even coverage without dark corners. Larger bathrooms scale proportionally.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391574704395,"sku":"RW5WW","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/200590_2a85b2ea-58e4-40ef-8638-c3ff3b83bdef.jpg?v=1747061973"},{"product_id":"valknight-fire-rated-dimmable-8w-4000k-led-downlight-white","title":"Valknight Fire-Rated Dimmable 8W 4000K LED Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Valknight is an 8W fire-rated LED downlight with a 65mm cut-out diameter, delivering 685 lumens of 4000K cool white light through a clear diffuser and die-cast aluminium housing. The integrated LED driver supports dimming with most trailing-edge and leading-edge dimmers, allowing output to be adjusted from full brightness down to low ambient levels depending on the dimmer model used.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential new-builds, refurbishments and commercial installations where fire rating is required by building regulations, the downlight carries certification for 30\/60\/90 minute fire resistance in solid timber joists and 30 minutes in I-joist and Staircraft floor constructions. The IP65 rating allows installation in bathrooms (Zone 1 and 2), kitchens and other damp environments where moisture ingress could occur. The low 50mm recessed depth fits standard ceiling voids of 100mm or greater without modification.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium body includes an integral heat sink that maintains LED junction temperature within safe operating limits, contributing to the rated 40,000-hour L70B50 lifespan. A loop-in\/loop-out terminal block on the rear of the fitting simplifies wiring across multiple downlights on the same circuit. The downlight is supplied without a bezel — Knightsbridge offers separate bezels in white, chrome, brushed chrome, brass and other finishes to match different interior schemes. An optional IC cage (VFRICC, sold separately) extends the recessed depth to 90mm and allows insulation to be laid over the fitting in loft spaces. Emergency conversion kits (VFR7EM and ICEMC, sold separately) are available for installations requiring maintained or non-maintained emergency lighting.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth with IC Cage\u003c\/td\u003e\n\u003ctd\u003e90mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e65mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e40000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e4000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCool White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e685lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light source only)\u003c\/td\u003e\n\u003ctd\u003e800lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e8W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy (Light source)\u003c\/td\u003e\n\u003ctd\u003e123.13lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-VFRIC8ACW.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Valknight compatible with dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The integrated driver supports dimming with most trailing-edge and leading-edge dimmers. Performance varies by dimmer model — test compatibility before completing a full installation, particularly if using older dimmer technology or mixing multiple downlights on one circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating allows installation in bathroom zones 1 and 2, including above baths and in shower enclosures. The IP20 rating from above means the void space above the ceiling does not need to be moisture-sealed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the fire rating require any additional accessories?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The downlight carries 30\/60\/90 minute fire rating in solid timber joists and 30 minutes in I-joist constructions as supplied. If insulation is to be laid over the fitting in a loft space, the optional IC cage (VFRICC, sold separately) is required to maintain the fire rating and safe operating temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bezel finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight is supplied without a bezel. Knightsbridge offers separate bezels in white, polished chrome, brushed chrome, brass and other finishes to match different interior schemes. The bezel clips onto the front of the die-cast body after the fitting is installed.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391607865611,"sku":"VFRIC8ACW","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/847892_7edaef3c-9b99-41e5-9824-3e8f52cf1b2b.jpg?v=1747062512"},{"product_id":"firenova-fire-rated-open-back-tilt-ld-downlight-matt-white","title":"FireNova Fire-Rated Open-Back Tilt LD Downlight - Matt White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe FireNova LD is a fire-rated tilt downlight with a 67mm recessed depth, designed for ceiling voids too shallow to accommodate standard downlight housings. The open-back pressed steel body tilts to direct a GU10 bulb (sold separately) at an angle, allowing accent lighting or wall-washing from a recessed ceiling position. A matt white magnetic bezel clips onto the front of the housing, with alternative finishes available separately.\u003c\/p\u003e\n\u003cp\u003eFire-tested to 30\/60\/90 minutes on solid wood joists and 30 minutes on metal web and I-joists, the FireNova meets UK Building Regulations for protected ceilings without additional intumescent hoods or cavity barriers. The tilt mechanism allows the lamp to be angled after installation, making it useful for lighting artwork, architectural features, or directing task light onto kitchen worktops from a ceiling-mounted position. The 72mm cut-out fits between standard 400mm joist centres.\u003c\/p\u003e\n\u003cp\u003eThe housing uses push-fit loop-in\/loop-out terminals that accept up to 2.5mm² cable without requiring a screwdriver, speeding installation on multi-downlight runs. The magnetic bezel system allows the face plate to be removed for redecorating or bulb changes without unscrewing or disturbing the wiring. The IP20 rating limits the fitting to dry internal rooms — bathrooms and wet rooms require higher-rated alternatives.\u003c\/p\u003e\n\u003cp\u003eThe low-depth design reduces the minimum void requirement to 120mm, compared to 150mm+ for many standard fire-rated downlights. This makes the FireNova LD a retrofit option in older properties with shallow floor-to-ceiling constructions, loft conversions with limited depth above plasterboard, and commercial fit-outs where services already occupy most of the ceiling void. Optional insulation bridge accessories (sold separately) allow the downlight to be covered by loft insulation without compromising fire rating or thermal performance.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e42.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e67mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e72mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e7W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-FRNFMW.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe FireNova LD requires a minimum 120mm void depth from the underside of the plasterboard to the top surface above. The recessed depth of the fitting itself is 67mm, with additional clearance needed for the GU10 bulb and wiring connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include a bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The downlight takes a standard GU10 bulb up to 7W (sold separately). Most users pair this with a 5-7W LED GU10 in 2700K-3000K warm white for general lighting, or 4000K for kitchens and task areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the tilt angle be adjusted after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The lamp holder tilts within the housing, allowing the GU10 bulb to be angled after the downlight is fitted. This makes it useful for directing light onto walls, artwork or work surfaces rather than straight down.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other bezel finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe included bezel is matt white. Knightsbridge produces magnetic replacement bezels in matt black, brushed chrome, polished chrome, polished brass and antique brass, sold separately. The magnetic fixing allows bezels to be swapped without rewiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391619236107,"sku":"FRNFMW","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1780078_5c5b5b78-2993-41f5-b999-f94197bccfab.jpg?v=1747062688"},{"product_id":"firenova-fire-rated-tilt-downlight-gu10-matt-white","title":"FireNova Fire-Rated Tilt Downlight GU10 - Matt White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe FireNova is a fire-rated recessed downlight with a 20° tilt mechanism housed in a matt white pressed steel bezel, designed for ceiling cut-outs of 75mm diameter. The fitting accepts a GU10 lamp up to 7W (sold separately) and provides directional light that can be angled towards walls, artwork or focal points within the 20° tilt range.\u003c\/p\u003e\n\u003cp\u003eFire-rated to 30, 60 and 90 minutes on solid wood joists and 30 minutes on metal web and I-joists, the FireNova meets UK Building Regulations requirements for fire compartmentation in domestic and commercial ceiling installations. The open-back design allows heat to dissipate into the ceiling void, reducing thermal build-up around the lamp. Loop-in\/loop-out wiring via push-fit terminals simplifies installation when running multiple downlights on a single circuit.\u003c\/p\u003e\n\u003cp\u003eThe matt white finish integrates cleanly into white or neutral ceilings with a 3mm projection from the ceiling surface when recessed, keeping the visual presence minimal. The downlight requires a minimum ceiling void depth of 120mm to accommodate the 67mm recessed housing depth plus clearance for the lamp and wiring. When paired with the optional FireNova insulation bridge accessory (sold separately), the fitting becomes IC-rated for installations where loft insulation is in direct contact with the fitting.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e49mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e67mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e20°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e7W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-FRNTMW.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 120mm void is required to fit the 67mm recessed housing plus a GU10 lamp and allow wiring clearance. Shallower voids cannot safely accommodate this fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 lamp used. Dimmable GU10 LED lamps will dim when paired with a compatible trailing-edge dimmer. Non-dimmable lamps should not be used with dimmers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan insulation touch the fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot without the FireNova insulation bridge accessory. The open-back design needs airflow for heat dissipation. If loft insulation will be in contact with the fitting, purchase the insulation bridge separately to achieve IC-rated status.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTested to 30, 60 and 90 minutes fire resistance on solid wood joists, and 30 minutes on metal web and I-joists. This meets UK Building Regulations Part B for maintaining ceiling fire compartmentation.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391628149003,"sku":"FRNTMW","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1780066_2a396e86-e711-49d6-9af1-85f91f82b598.jpg?v=1747062799"},{"product_id":"firenova-fire-rated-open-back-tilt-downlight-matt-black","title":"FireNova Fire-Rated Open-Back Tilt Downlight - Matt Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe FireNova is an 85mm fire-rated tilt downlight with an open-back pressed steel body finished in matt black. The fitting accepts a standard GU10 LED bulb (sold separately, max 7W) and tilts up to 20° from centre, allowing light to be angled towards walls, artwork or specific zones within a room rather than casting straight down.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial ceiling installations requiring fire-rated performance, the FireNova carries a 30\/60\/90-minute fire rating on solid wood joists and 30 minutes on metal web and I-joists. The open-back design allows heat to dissipate into the ceiling void rather than trapping it around the fitting, reducing thermal stress on the lamp and prolonging bulb life. The 67mm recessed depth requires a minimum 120mm ceiling void and a 75mm cut-out diameter.\u003c\/p\u003e\n\u003cp\u003eThe fitting uses push-fit loop-in\/loop-out terminals for faster installation across multiple downlight runs, eliminating the need for individual wiring to each fitting. When paired with an insulation bridge accessory (sold separately), the FireNova becomes IC-rated, meaning it can be safely covered by loft insulation without creating a fire risk. The matt black finish provides a low-sheen surface that recedes visually against dark ceilings and pairs cleanly with industrial, modern and monochrome interiors.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\" style=\"width: 100.036%; height: 352.8px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 49.4807%; height: 19.6px;\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"width: 48.0592%; height: 19.6px;\"\u003e85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 49.4807%; height: 19.6px;\"\u003eHeight\u003c\/td\u003e\n\u003ctd style=\"width: 48.0592%; height: 19.6px;\"\u003e49mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 49.4807%; height: 19.6px;\"\u003eProjection\u003c\/td\u003e\n\u003ctd style=\"width: 48.0592%; height: 19.6px;\"\u003e3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 49.4807%; height: 19.6px;\"\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd style=\"width: 48.0592%; height: 19.6px;\"\u003e67mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 49.4807%; height: 19.6px;\"\u003eMinimum Void\u003c\/td\u003e\n\u003ctd style=\"width: 48.0592%; height: 19.6px;\"\u003e120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 49.4807%; height: 19.6px;\"\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd style=\"width: 48.0592%; height: 19.6px;\"\u003e75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 49.4807%; height: 19.6px;\"\u003eTilt\u003c\/td\u003e\n\u003ctd style=\"width: 48.0592%; height: 19.6px;\"\u003e20°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 49.4807%; height: 19.6px;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"width: 48.0592%; height: 19.6px;\"\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 49.4807%; height: 19.6px;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"width: 48.0592%; height: 19.6px;\"\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 49.4807%; height: 19.6px;\"\u003eIP Rating\u003c\/td\u003e\n\u003ctd style=\"width: 48.0592%; height: 19.6px;\"\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 49.4807%; height: 19.6px;\"\u003eClass\u003c\/td\u003e\n\u003ctd style=\"width: 48.0592%; height: 19.6px;\"\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 49.4807%; height: 19.6px;\"\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 48.0592%; height: 19.6px;\"\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 49.4807%; height: 19.6px;\"\u003eLamp Technology\u003c\/td\u003e\n\u003ctd style=\"width: 48.0592%; height: 19.6px;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 49.4807%; height: 19.6px;\"\u003eLamp Base\u003c\/td\u003e\n\u003ctd style=\"width: 48.0592%; height: 19.6px;\"\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 49.4807%; height: 19.6px;\"\u003eLamp Included\u003c\/td\u003e\n\u003ctd style=\"width: 48.0592%; height: 19.6px;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 49.4807%; height: 19.6px;\"\u003eDimmable\u003c\/td\u003e\n\u003ctd style=\"width: 48.0592%; height: 19.6px;\"\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 49.4807%; height: 19.6px;\"\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd style=\"width: 48.0592%; height: 19.6px;\"\u003e7W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 49.4807%; height: 19.6px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"width: 48.0592%; height: 19.6px;\"\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-FRNTMB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe FireNova requires a minimum 120mm void above the ceiling plasterboard to accommodate the 67mm recessed depth of the fitting plus clearance for heat dissipation. The cut-out diameter is 75mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a GU10 bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. GU10 bulbs are sold separately. The fitting accepts any standard GU10 LED up to 7W. Most users pair this with a 5-6W warm white LED at 2700K-3000K for general ambient lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming capability depends on the GU10 bulb fitted. If you use a dimmable GU10 LED and pair it with a compatible LED dimmer, the FireNova will dim. Non-dimmable GU10 bulbs will not dim regardless of the dimmer used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be covered by loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnly when paired with an insulation bridge accessory (sold separately). The open-back design allows heat into the ceiling void, which can ignite insulation if the fitting is directly covered. The insulation bridge creates a safe air gap and makes the fitting IC-rated.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391628280075,"sku":"FRNTMB","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1821780_c82ca69f-1c96-46aa-a870-b18981fc3061.jpg?v=1747062803"},{"product_id":"firenova-fire-rated-tilt-downlight-gu10-brushed-chrome","title":"FireNova Fire-Rated Tilt Downlight GU10 - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe FireNova is a fire-rated tilt downlight with a brushed chrome bezel, open-back construction and a 20° tilt mechanism for directed beam positioning. The fitting accepts GU10 LED lamps up to 7W (sold separately) and meets 30\/60\/90 minute fire rating for solid wood joists, and 30 minutes for metal web and I-joists. The open-back design removes the traditional enclosed can, improving heat dissipation and extending lamp life.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial ceilings where fire-rated downlights are required by Building Regulations, the FireNova fits a 75mm cut-out and requires 120mm minimum void depth above the ceiling. The tilt mechanism allows the beam to be angled up to 20° from vertical, making it suitable for accent lighting onto walls, artwork or architectural features, or for task lighting where the beam needs to be directed away from the centre of the room. The loop-in\/loop-out terminals allow multiple fittings to be chained without additional junction boxes.\u003c\/p\u003e\n\u003cp\u003eThe brushed chrome finish provides a neutral metallic appearance that pairs with both warm and cool-toned interiors. The pressed steel construction keeps the fitting lightweight at under 200g, and the 3mm projection from the ceiling gives a low-profile finish once installed. The IP20 rating makes this suitable for dry internal locations including living rooms, bedrooms, hallways and offices. For installation under loft insulation, pair with the FireNova insulation bridge accessory (sold separately) to maintain the fire rating and prevent contact with insulation material.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e49mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e67mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e20°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e7W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-FRNTBC.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe FireNova takes a GU10 LED bulb up to 7W maximum. Bulbs are sold separately. Most users pair this with a 5-7W warm-white GU10 LED at 2700K-3000K for general downlighting, or 4000K for task lighting in kitchens and home offices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is certified to 30\/60\/90 minutes for solid wood joists, and 30 minutes for metal web and I-joists. Installation must follow the manufacturer's instructions to maintain the fire rating. For installation under loft insulation, use the FireNova insulation bridge accessory to preserve the rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 120mm void above the ceiling is required for safe installation. The fitting's recessed depth is 67mm, but the fire-rating mechanism and heat dissipation both depend on adequate air space around the fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating makes this suitable only for dry internal locations. For bathrooms, use an IP65-rated downlight designed for Zone 1 or Zone 2 installation depending on proximity to the shower or bath.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391628640523,"sku":"FRNTBC","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1821770_1823de49-8714-46d2-9ab7-d72d351a8e61.jpg?v=1747062808"},{"product_id":"firenova-fire-rated-tilt-downlight-gu10-polished-chrome","title":"FireNova Fire-Rated Tilt Downlight GU10 - Polished Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe FireNova is a fire-rated tilt downlight with a polished chrome bezel, an open-back pressed steel housing and a 20° tilt mechanism that allows the GU10 lamp (sold separately) to be angled for directional task or accent lighting. The fitting is fire-tested to 30, 60 and 90 minutes on solid wood joists and 30 minutes on metal web joists and I-joists, meeting UK Building Regulations for fire-rated recessed lighting installations.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial ceilings where directional lighting is needed without compromising fire safety, the FireNova suits kitchens, hallways, retail displays and offices. The 75mm cut-out fits standard ceiling voids with a minimum 120mm clearance above the plasterboard. The open-back design allows heat to dissipate into the void, extending lamp life compared to closed-back downlights.\u003c\/p\u003e\n\u003cp\u003eInstallation uses push-fit terminals with loop-in\/loop-out wiring capability, meaning multiple downlights can be daisy-chained on a single circuit without needing individual junction boxes. The polished chrome finish provides a high-gloss reflective bezel that suits contemporary and modern interiors. The fitting accepts any GU10 LED, halogen or low-energy lamp up to 7W (most installers use 4-6W LED), with dimmer compatibility depending on the bulb chosen. The Class II rating means no earth connection is required.\u003c\/p\u003e\n\u003cp\u003eThe FireNova carries a 5-year guarantee and can be made IC-rated (insulation contact) when paired with Knightsbridge's separate insulation bridge accessory (sold separately), allowing insulation to be laid directly over the fitting without creating a cold spot or fire hazard.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e49mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e67mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e20°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e7W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-FRNTPC.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does the FireNova take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes a GU10 bulb up to 7W maximum. Bulbs are sold separately. Most users install a 4-6W GU10 LED in warm white (2700K-3000K) for general lighting or cool white (4000K) for task lighting in kitchens and offices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It is rated IP20, so it is for dry rooms only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the 20° tilt allow?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lamp can be angled up to 20° from vertical in any direction once installed. This allows light to be aimed at a wall, worktop, display shelf or specific area rather than straight down, making the FireNova useful for accent lighting or task lighting where fixed-direction downlights would miss the target.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is insulation handled above the fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe open-back design allows heat to dissipate but does require a 120mm clear void above the fitting. For installations where insulation must cover the entire ceiling void, pair the FireNova with Knightsbridge's insulation bridge accessory (sold separately), which creates an IC-rated (insulation contact) enclosure around the fitting.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391628771595,"sku":"FRNTPC","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1821792_1307e0ed-b069-4bda-b4d4-66e460064bd5.jpg?v=1747062812"},{"product_id":"firenova-fire-rated-tilt-downlight-gu10-polished-brass","title":"FireNova Fire-Rated Tilt Downlight GU10 - Polished Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe FireNova is a fire-rated recessed tilt downlight with a polished brass bezel, pressed steel construction and a GU10 lamp holder that accepts bulbs up to 7W. The bezel tilts 20° from the vertical, allowing the light beam to be directed toward a wall, artwork or focal point rather than straight down. The open-back design uses loop-in\/loop-out push-fit terminals for fast daisy-chaining across multiple downlights without additional junction boxes.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential ceilings where fire safety regulations apply, the FireNova is fire-tested to 30\/60\/90 minutes on solid wood joists and 30 minutes on metal web joists and I-joists. The fitting requires a 75mm cut-out and a minimum void depth of 120mm above the ceiling. When paired with the FireNova insulation bridge accessory (sold separately), the fitting becomes IC-rated and can be covered directly with loft insulation without creating a fire risk.\u003c\/p\u003e\n\u003cp\u003eThe polished brass finish provides a warm metallic accent that suits both traditional and contemporary interiors, and the low 3mm projection from the ceiling keeps the bezel discreet. The IP20 rating limits the fitting to dry indoor locations such as living rooms, bedrooms, hallways and dining rooms. Bulbs are sold separately, giving flexibility to choose the beam angle, colour temperature and dimmer compatibility that suits the room.\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces alternative magnetic bezels for the FireNova in different finishes, allowing the polished brass bezel to be swapped for brushed chrome, matt black or white without re-wiring. The 5-year warranty covers the downlight housing and fire-rating integrity when installed according to the datasheet.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e49mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e67mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e20°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e7W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-FRNTPB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does the FireNova take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight accepts standard GU10 LED bulbs up to 7W maximum. Bulbs are sold separately. Most users pair this with a 5-6W GU10 LED in either warm white (2700K-3000K) or neutral white (4000K) depending on the room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be covered with loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot on its own. The downlight becomes IC-rated when paired with the FireNova insulation bridge accessory (sold separately), which allows loft insulation to be laid directly over the fitting without creating a fire risk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe FireNova is fire-tested to 30\/60\/90 minutes on solid wood joists and 30 minutes on metal web joists and I-joists. Installation must follow the datasheet to maintain the fire rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Knightsbridge produces alternative magnetic bezels in different finishes (brushed chrome, matt black, white) that clip onto the same downlight housing, allowing the polished brass bezel to be swapped without re-wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391628869899,"sku":"FRNTPB","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1821788_6e954e22-1e7e-46ac-9dbb-cde1291e89b6.jpg?v=1747062816"},{"product_id":"firenova-fire-rated-tilt-downlight-gu10-antique-brass","title":"FireNova Fire-Rated Tilt Downlight GU10 - Antique Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge FireNova is a fire-rated tilt downlight with an antique brass pressed steel bezel, a 20° tilt mechanism and an open-back design that allows ceiling void airflow around the GU10 lamp fitting. The downlight provides 30\/60\/90 minute fire protection when installed into solid wood joists, or 30 minutes on metal web joists and I-joists, meeting UK building regulations for fire-rated ceiling penetrations.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential refurbishment, heritage properties and hospitality projects where period aesthetics are needed alongside modern fire safety, the FireNova sits flush to the ceiling with a 3mm projection and a 75mm cut-out diameter. The open-back construction eliminates the need for a sealed housing, reducing heat build-up around the lamp and extending GU10 LED lifespan. Push-fit loop-in\/loop-out terminals allow daisy-chain wiring without terminal blocks.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish shows directional brushing with a deliberately aged patina that pairs with traditional brass switches, sockets and period door furniture. The 20° tilt allows the beam to be angled towards artwork, architectural features or the edge of a room rather than straight downward. The fitting accepts any standard GU10 LED or halogen lamp up to 7W (sold separately), with dimming capability dependent on the chosen lamp.\u003c\/p\u003e\n\u003cp\u003eThe FireNova can be installed under solid insulation when paired with Knightsbridge's FireNova insulation bridge accessory (sold separately), which maintains the fire rating while allowing loft insulation to sit over the downlight. Magnetic bezels in other finishes (polished chrome, brushed chrome, white, black) are available separately, allowing the finish to be changed without rewiring.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e49mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e67mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e20°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e7W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-FRNTAB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight needs a minimum 120mm void depth from the ceiling surface to the top of the joist or ceiling structure. The recessed depth of the fitting itself is 67mm, but the void requirement accounts for wiring clearance and fire protection integrity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a GU10 bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The fitting accepts any standard GU10 LED or halogen lamp up to 7W maximum. Most users pair this with a 5-6W warm white LED GU10 at 2700K-3000K for residential applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming capability depends on the GU10 lamp you choose. The fitting itself supports dimmable lamps when paired with a compatible trailing-edge dimmer. Check the lamp packaging for dimmer compatibility before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It is rated IP20, so it is for dry rooms only. For bathrooms, Knightsbridge produces IP65-rated fire-rated downlights in similar finishes.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391629000971,"sku":"FRNTAB","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1821762_f3846fba-d72b-43ac-9747-4e4b8d62ee28.jpg?v=1747062821"},{"product_id":"firenova-fire-rated-open-back-fixed-downlight-matt-white","title":"FireNova Fire-Rated Open-Back Fixed Downlight - Matt White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge FireNova is an 85mm fire-rated fixed downlight with an open-back design built around a pressed steel housing and magnetic matt white bezel. The open-back construction removes the need for a sealed can, allowing heat from the GU10 bulb (sold separately, up to 7W) to dissipate directly into the ceiling void, reducing operating temperature and extending bulb life. The downlight is rated IP65 from below and IP20 from above, making it suitable for bathrooms, kitchens and other moisture-prone areas.\u003c\/p\u003e\n\u003cp\u003eDesigned for new-build and retrofit installation into plasterboard ceilings with a minimum 120mm void depth, the FireNova uses tool-free push-fit terminals for mains connection and loop-in\/loop-out wiring to daisy-chain multiple fittings from a single feed. The 72mm cut-out requires a standard hole saw and the fitting is held in place by fold-out spring clips that grip the ceiling from above. Fire resistance is tested to 30\/60\/90 minutes on solid wood joists and 30 minutes on metal web and I-joists, meeting UK Building Regulations for fire compartmentation in domestic and light commercial applications.\u003c\/p\u003e\n\u003cp\u003eThe magnetic bezel system allows the matt white bezel to be removed and replaced with alternative finishes (sold separately) without re-wiring or removing the fitting from the ceiling. An optional insulation bridge accessory (sold separately) allows the downlight to be covered with solid insulation without compromising fire rating or overheating. The 3mm projection from the ceiling gives a low-profile finish that suits low-ceiling rooms and minimal-detail contemporary interiors. The 5-year guarantee covers the fitting itself; GU10 bulbs are warranted separately by their manufacturer.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e42.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e67mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e72mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e7W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-FRNIPMW.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does this downlight carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe FireNova is tested to 30\/60\/90 minutes fire resistance on solid wood joists and 30 minutes on metal web and I-joists. This meets UK Building Regulations for domestic and light commercial ceiling fire compartmentation. The rating applies when installed correctly with the appropriate ceiling construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be covered with insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn optional insulation bridge accessory (sold separately) allows the downlight to be covered with solid insulation without compromising the fire rating or causing overheating. Without this accessory, maintain clearance around the fitting per the installation instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathroom zones?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating from below makes the FireNova suitable for bathroom zones 1 and 2 (areas around baths and showers where water spray is possible). IP20 from above means the ceiling void must be dry. Always check that the specific zone requirements are met before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the bezels interchangeable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The matt white bezel is magnetic and can be removed by hand and replaced with alternative finishes sold separately by Knightsbridge. The bezel change does not require re-wiring or removing the fitting from the ceiling.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391630213387,"sku":"FRNIPMW","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1780050_dcd136a6-df44-46b6-9fd8-84305507f1d5.jpg?v=1747062825"},{"product_id":"spektroled-evo-8w-fire-rated-smart-led-downlight-rgb-cct-white","title":"SpektroLED Evo 8W Fire-Rated Smart LED Downlight RGB \u0026 CCT - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SpektroLED Evo is an 8W fire-rated LED downlight with RGB colour control and adjustable CCT from 3000K to 6000K, controlled via the SmartKnight app over Wi-Fi. The fitting uses a CoB LED delivering 855lm output through a prismatic diffuser, with a white pressed steel magnetic bezel as standard and five alternative bezel finishes available separately (matt black, polished chrome, brushed chrome, brushed brass, antique brass).\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and commercial installation where colour-changing or tuneable white light is needed, the downlight carries IP65 rating from below (IP20 from above), making it suitable for bathrooms, wet rooms and kitchens. The fitting is fire-rated for 30\/60\/90 minutes in solid timber ceilings, 30 minutes in web joist and 30 minutes in i-joist construction. It is also IC-rated for direct contact with loft insulation and acoustic-rated to ISO 10140-2:2010.\u003c\/p\u003e\n\u003cp\u003eThe SpektroLED Evo uses a male-female connector system that allows cables to be terminated during first fix and hidden until decoration is complete, with the downlight plugged in after painting. The same connector allows the fitting to be unplugged for maintenance or bezel changes without disturbing the wiring. The 70mm cut-out and 43mm minimum void requirement suit standard joist depths. Voice control is available via Amazon Alexa and Google Assistant, and multiple fittings can be grouped into zones or scenes within the app (maximum 100 fittings per group).\u003c\/p\u003e\n\u003cp\u003eThe RGB mode provides full-spectrum colour control for accent lighting, party mode or visual signalling, while the CCT mode allows white light to be shifted from warm 3000K to cool 6000K for task lighting or circadian rhythm alignment. The fitting carries a 7-year manufacturer warranty and meets post-2021 energy efficiency standards (Class C). Dimming is controlled via the app rather than mains dimmers.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e43mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e43mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBezel Included\u003c\/td\u003e\n\u003ctd\u003eYes white\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterchangeable Bezel\u003c\/td\u003e\n\u003ctd\u003eMagnetic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eCoB LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e35000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000-6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eRGB+CCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e855lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light source only)\u003c\/td\u003e\n\u003ctd\u003e1050lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e8W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy (Light source)\u003c\/td\u003e\n\u003ctd\u003e156lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi + BLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e7 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-SPKEVFKRGBW.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs the SpektroLED Evo suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The fitting carries an IP65 rating from below, making it suitable for wet rooms, bathrooms and shower zones where moisture is present. The IP20 rating from above means the void space above the ceiling must remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour and colour temperature controlled?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eColour and CCT are controlled via the SmartKnight app over Wi-Fi (2.4GHz only). The downlight can be switched on and off at the wall switch, but RGB colour selection and CCT adjustment require the app. Voice control is also available via Amazon Alexa and Google Assistant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I change the bezel finish?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The white bezel is magnetic and can be swapped for alternative finishes (matt black, polished chrome, brushed chrome, brushed brass, antique brass) sold separately. The bezel pulls off without tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the advantage of the plug connector system?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe male-female connector allows cables to be terminated during first fix and hidden behind plasterboard until decorating is finished. The downlight is then plugged in after painting, avoiding paint splatter on the fitting. The same system allows the downlight to be unplugged for maintenance without disturbing the wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391632507147,"sku":"SPKEVFKRGBW","price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1726298_7484ca74-6d38-4015-8f44-26cbc709ba06.jpg?v=1747062861"},{"product_id":"renu-6w-fire-rated-dimmable-led-downlight-cct-switchable-white","title":"Renu 6W Fire-Rated Dimmable LED Downlight CCT Switchable - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Renu is a 6W fixed LED downlight with colour temperature switching between 3000K warm white, 4000K neutral white and 6500K daylight. The integrated SMD LED delivers 575-635 lumens depending on the selected colour temperature, housed in a pressed steel and polycarbonate body rated IP65 from below and IP20 from above. Fire-rated for 30\/60\/90 minutes in solid timber joists, 30 minutes in web joists and 30\/90 minutes in I-joists, the fitting meets Building Regulations requirements for recessed ceiling penetrations.\u003c\/p\u003e\n\u003cp\u003eDesigned for new-build and retrofit installation in residential bathrooms, kitchens, hallways and living spaces, the Renu fits ceiling voids with a minimum 48mm depth and requires a 55-70mm adjustable cut-out. The IP65 rating from the front allows use in bathroom zones 1 and 2 when positioned correctly. Push-fit terminals accept loop-in\/loop-out wiring, allowing multiple downlights to be daisy-chained without additional junction boxes. The fitting is dimmable when paired with trailing-edge dimmers — compatibility should be checked before installation.\u003c\/p\u003e\n\u003cp\u003eThe 86mm diameter white trim projects just 2mm from the ceiling once fitted, giving a low-profile finish. Interchangeable bezels in white, matt black, polished chrome, brushed chrome and brass are sold separately, allowing the downlight to be respecified without replacing the entire fitting. The Class II construction requires no earth connection. IC-rated for contact with insulation and acoustic-rated for ceiling assemblies requiring sound attenuation between floors. Backed by a 3-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e48mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e48mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e55-70mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel \u0026amp; polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e0.15m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e30000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/6500K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e575\/635\/595lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light source only)\u003c\/td\u003e\n\u003ctd\u003e665lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e6W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy (Light source)\u003c\/td\u003e\n\u003ctd\u003e115lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-RE6CTF.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Renu has a small switch on the driver unit (the purple module visible in the image). Flick the switch before installation to select 3000K warm white, 4000K neutral white or 6500K daylight. The colour temperature cannot be changed once the fitting is installed and the ceiling closed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below allows use in bathroom zones 1 and 2 when positioned according to wiring regulations. The fitting is IP20 from above, so the ceiling void itself must remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 48mm void depth is required. The fitting itself is 48mm deep, so the void must accommodate this plus any insulation clearance if the ceiling is not IC-rated (this fitting is IC-rated, meaning insulation can be in contact).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I replace the white bezel with a different finish?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Knightsbridge supplies interchangeable bezels in white, matt black, polished chrome, brushed chrome and brass. The bezel clips onto the main body, so you can change the finish without replacing the entire downlight or rewiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391679594763,"sku":"RE6CTF","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/2064400_3be5731c-8944-49b7-a724-44cb69db8f43.jpg?v=1747063402"},{"product_id":"renu-6w-fire-rated-dimmable-led-tilt-downlight-white-3000k-4000k-6500k-cct","title":"Renu 6W Fire-Rated Dimmable LED Tilt Downlight - White (3000K\/4000K\/6500K CCT)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Renu is a 6W fire-rated LED tilt downlight with switchable colour temperature selection between 3000K warm white, 4000K neutral white and 6500K cool white, accessed via a switch on the rear of the LED driver. The fitting tilts up to 20° from vertical, allowing light to be directed onto a wall, artwork or worktop rather than straight down.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installations where fire rating, acoustic control and thermal insulation contact are required, the Renu carries 30\/60\/90-minute fire ratings for solid timber joists, 30-minute for web joists and 30\/90-minute for i-joists. The IC rating allows it to be installed in direct contact with loft insulation without overheating, and the acoustic rating reduces sound transmission between floors in multi-storey buildings. The 86mm diameter white bezel projects just 2mm from the ceiling once installed, with a 55-70mm adjustable cut-out to suit different ceiling thicknesses.\u003c\/p\u003e\n\u003cp\u003eThe fitting uses pressed steel and polycarbonate construction with push-fit loop-in\/loop-out terminals that allow multiple downlights to be daisy-chained without junction boxes. The integrated 6W LED delivers 560-630 lumens depending on which colour temperature is selected, with a CRI of \u0026gt;80 and a 50° beam angle. The downlight is dimmable when paired with trailing-edge dimmers (compatibility should be checked before installation). Interchangeable bezels in matt black, polished chrome, brushed chrome and brass are available separately, allowing the finish to be changed without rewiring.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e62mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e62mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e55-70mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e20°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel \u0026amp; polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e0.15m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/6500K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e560\/630\/590lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light source only)\u003c\/td\u003e\n\u003ctd\u003e665lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e6W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy (Light source)\u003c\/td\u003e\n\u003ctd\u003e115lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-RE6CTT.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA small switch on the rear of the LED driver allows you to select between 3000K (warm white), 4000K (neutral white) and 6500K (cool white). The colour temperature is set during installation and cannot be changed once the ceiling is closed up without removing the downlight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 62mm void depth is needed above the ceiling to accommodate the recessed body of the downlight and the separate driver unit. The cut-out diameter adjusts between 55mm and 70mm to suit different ceiling thicknesses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for insulated ceilings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IC rating allows the downlight to be installed in direct contact with loft insulation without overheating. The fire rating also covers solid timber joists (30\/60\/90 minutes), web joists (30 minutes) and i-joists (30\/90 minutes).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be changed to a different finish?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Knightsbridge produces interchangeable bezels for the Renu range in matt black, polished chrome, brushed chrome and brass. The bezel can be swapped without rewiring the fitting.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391680184587,"sku":"RE6CTT","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/2064410_90f4da2c-ed01-4572-8621-7b51cc80950e.jpg?v=1747063406"},{"product_id":"cyroled-fire-rated-fixed-cct-led-downlight-white-no-bezel","title":"CyroLED Fire-Rated Fixed CCT LED Downlight - White (No Bezel)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge CyroLED is an 86mm fire-rated fixed LED downlight with selectable colour temperature (CCT) and dual wattage switching. The integrated LED can be set to 3000K, 4000K, 5000K or 6500K via a switch on the driver unit before installation, and toggled between 4W and 6W output to adjust brightness. The white pressed-steel housing is fire-rated for 30, 60 or 90 minutes depending on ceiling construction, and carries IP65 rating from below (IP20 from above), making it suitable for bathrooms, kitchens and hallways.\u003c\/p\u003e\n\u003cp\u003eDesigned for new builds, refurbishments and whole-property lighting schemes where consistent appearance across multiple rooms is required, the CyroLED uses loop-in\/loop-out quick connectors that reduce installation time when wiring multiple downlights on a single circuit. The 31mm recessed depth fits standard ceiling voids without needing additional clearance, and the no-bezel design allows contractors and homeowners to add separate bezel finishes (sold separately) to match interior décor. The 55° beam angle provides general room lighting rather than narrow spotlighting.\u003c\/p\u003e\n\u003cp\u003eThe pressed-steel construction gives structural rigidity and thermal stability under continuous operation. The Class II double-insulated rating means no earth connection is required, simplifying wiring in older properties. The downlight is IC rated for contact with insulation, so loft insulation can be laid directly over the fitting without creating a thermal risk. The unit is dimmable via trailing-edge dimmers only — check dimmer compatibility before installation, as leading-edge dimmers will cause flicker or failure to dim smoothly.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e31mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e4\/2W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e55°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e430\/460\/470\/465\/610\/680\/695\/660lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-CYRF.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature and wattage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth settings are controlled by switches on the LED driver unit, accessible before the downlight is installed. The CCT switch toggles between 3000K (warm white), 4000K (neutral white), 5000K (cool white) and 6500K (daylight). The wattage switch toggles between 4W and 6W output. Once the ceiling is closed, the settings cannot be changed without removing the downlight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes the CyroLED suitable for bathroom zones 1 and 2 (directly above baths and showers) provided it is installed correctly and the IP65 seal is maintained. The IP20 rating from above means the ceiling void itself does not need to be moisture-sealed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight recesses 31mm into the ceiling void. A minimum 40mm void depth is recommended to allow clearance for the driver unit and wiring connections. The IC rating means insulation can be laid directly over the fitting without creating an air gap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, but only with trailing-edge dimmers. Leading-edge dimmers are not compatible and will cause flicker or prevent smooth dimming. Check your dimmer specification before pairing with the CyroLED, or contact us for dimmer recommendations.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":52475342618891,"sku":"CYRF","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/2124518_f0b24a75-fe95-4fd8-a9fa-5da08bd6f345.jpg?v=1760643101"},{"product_id":"cyroled-fire-rated-tilt-cct-led-downlight-white-no-bezel","title":"CyroLED Fire-Rated Tilt CCT LED Downlight - White (No Bezel)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge CyroLED is an 86mm fire-rated tiltable LED downlight with selectable colour temperature (CCT) and wattage settings, supplied without a bezel for use with Knightsbridge's interchangeable twist-lock bezel range (sold separately). The lamp head tilts within the housing to direct light onto artwork, worktops, or architectural features, while the integrated LED provides four colour temperature options (3000K, 4000K, 5000K, 6500K) switchable via a DIP switch on the driver.\u003c\/p\u003e\n\u003cp\u003eDesigned for fire-rated ceilings requiring 30\/60\/90 minute protection, the CyroLED is IC rated for direct contact with loft insulation and carries IP65 front protection, making it suitable for bathrooms (zones 1 and 2), kitchens, and general interior use. The 40mm recessed depth fits standard joist gaps and the loop-in\/loop-out connector allows multiple downlights to be daisy-chained on a single circuit without separate junction boxes. The no-bezel configuration allows specifiers to choose a bezel finish (white, chrome, brass, black) separately, giving flexibility where multiple finishes are needed across a project without stocking separate complete units.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel housing measures 86mm in diameter with a 40mm recess depth and a minimal 4mm projection from the ceiling once the bezel is fitted. Wattage is selectable between 4W, 6W, 8W and 12W depending on the required light output, with lumen output ranging from 410lm (4W, 3000K) to 685lm (8W, 5000K). The 50° beam angle provides focused directional light when the head is tilted, or even ceiling wash when pointed straight down. Dimmable with trailing-edge dimmers (compatibility should be checked before installation as not all trailing-edge dimmers perform identically).\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e40mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e4\/6\/8\/12W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e50°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e410\/445\/455\/450\/605\/660\/685\/655lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-CYRT.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature and wattage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CyroLED has a DIP switch on the LED driver accessible during installation. Colour temperature can be set to 3000K (warm white), 4000K (neutral white), 5000K (cool white), or 6500K (daylight). Wattage can be selected between 4W, 6W, 8W and 12W depending on the light output needed. Both settings are fixed once installed and cannot be changed from the room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is there no bezel included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CyroLED CYRT is supplied without a bezel to allow specifiers to choose the finish separately. Knightsbridge produces twist-lock bezels in white, polished chrome, brushed chrome, antique brass, polished brass, matt black and other finishes that clip into the same housing. This reduces stock complexity where a project requires multiple bezel finishes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathroom use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 front rating makes the CyroLED suitable for bathroom zones 1 and 2 (above the bath\/shower and within 0.6m of a basin). The IP20 rating from above means the fitting must be installed in a ceiling void that is not subject to water ingress.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CyroLED is fire-rated for 30, 60 and 90 minutes when installed correctly in a fire-rated ceiling. It is also IC rated, meaning it can be installed in direct contact with loft insulation without overheating.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":52475342848267,"sku":"CYRT","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/2124570_5aa5ef94-51fc-4583-a501-37aceb13e005.jpg?v=1760643103"},{"product_id":"cyroled-fire-rated-anti-glare-cct-led-downlight-white-no-bezel","title":"CyroLED Fire-Rated Anti-Glare CCT LED Downlight - White (No Bezel)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge CyroLED is an 86mm fire-rated anti-glare LED downlight with adjustable colour temperature and wattage settings built into the fitting. The recessed LED source sits behind a deep-set aperture that minimises direct view of the diode, reducing glare in kitchens, living rooms and bathrooms where the ceiling is in the normal sightline. The fitting is supplied without a bezel, allowing you to pair it with separate Knightsbridge bezel finishes (sold separately) in white, chrome, brass or black.\u003c\/p\u003e\n\u003cp\u003eThe downlight offers four CCT settings via a rear-mounted switch: 3000K, 4000K, 5000K and 6500K, ranging from warm white through neutral to cool daylight. A second switch toggles between 4W and 6W output, giving eight distinct lighting modes from a single fitting. The IP65 rating from below allows installation in bathroom zones 1 and 2 (subject to circuit protection) and the fire rating meets UK Building Regulations for retrofit ceiling penetrations. The 53mm recessed depth fits most ceiling voids and the loop-in\/loop-out terminal block speeds installation in multi-downlight circuits.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel housing carries Class II double-insulated construction, meaning it does not require an earth connection and is suitable for older wiring systems. The 45-degree beam angle provides focused downlighting rather than wide ambient wash, making it effective for task lighting over worktops, sinks and vanity units. The fitting is dimmable on trailing-edge dimmers; check compatibility with your dimmer model before installation as some older leading-edge dimmers may cause flicker.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e58mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e53mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e4\/2W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e350\/395\/405\/395\/480\/580\/585\/545lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-CYRAG.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature and wattage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo DIP switches on the rear of the fitting allow you to select one of four CCT settings (3000K, 4000K, 5000K, 6500K) and toggle between 4W and 6W output. Settings are adjusted before installation or by removing the fitting from the ceiling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this come with a bezel?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The CyroLED Anti-Glare is sold as a bezel-less fitting, allowing you to choose from Knightsbridge's range of separate bezels in white, polished chrome, brushed chrome, antique brass, matt black or satin nickel to match your interior.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below allows installation in bathroom zones 1 and 2 (within 2.25m of a bath or shower enclosure), subject to the circuit being RCD-protected. The IP20 rating from above means the ceiling void does not need additional moisture protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires a minimum 53mm recessed depth above the ceiling surface, plus clearance for the connector block and cable. Most plasterboard ceilings on timber joists provide adequate depth; suspended ceilings may need a deeper void depending on the grid system.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":52475343798539,"sku":"CYRAG","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/2286542_07efb1ea-0f0c-4ab3-ac6c-7765df0ffba1.jpg?v=1760643114"},{"product_id":"cyroled-fire-rated-fixed-cct-led-downlight-white-pack-of-10","title":"CyroLED Fire-Rated Fixed CCT LED Downlight - White (Pack of 10)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge CyroLED is a fire-rated fixed LED downlight with selectable colour temperature (3000K, 4000K, 5000K, 6500K) and dual wattage options (4W or 6W), sold as a pack of ten white-bezel units. Each downlight houses an integrated LED module behind an 86mm diameter pressed steel bezel with an IP65 front rating, making it suitable for installation in bathrooms, showers and other humid environments where water contact from below is possible.\u003c\/p\u003e\n\u003cp\u003eFire-rated to 30\/60\/90 minutes and IC-rated for direct contact with insulation in loft spaces, the CyroLED meets UK Building Regulations for fire compartmentation in ceilings. The 31mm recessed depth fits standard ceiling voids without modification, and the loop-in\/loop-out connectors reduce wiring time across multi-unit installations. The 55° beam angle provides general ambient light rather than narrow spotlighting, suitable for hallways, kitchens, bathrooms and retail spaces where even coverage is needed.\u003c\/p\u003e\n\u003cp\u003eEach unit allows on-site selection of both colour temperature and wattage via switches accessed before final installation, so a single stock SKU can serve warm-white living rooms (3000K), neutral office spaces (4000K), or cool task areas (5000K\/6500K) without ordering separate models. The downlight is dimmable via trailing-edge dimmers — leading-edge compatibility should be checked with the dimmer manufacturer before specifying. The white bezel can be swapped for optional coloured bezels sold separately.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e31mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e4\/2W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e55°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e430\/460\/470\/465\/610\/680\/695\/660lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable location\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-CYRFS10.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this downlight suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 front rating protects the LED module from water splashes and steam from below, making it suitable for bathroom zones 1 and 2 (outside the shower cubicle itself). The IP20 rating from above means the ceiling void above the fitting must remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does selectable CCT mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach downlight has a switch accessible during installation that selects one of four colour temperatures: 3000K (warm white), 4000K (neutral white), 5000K (cool white), or 6500K (daylight). Once set, the colour temperature is fixed unless you access the switch again.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight requires a minimum 31mm recessed depth from the finished ceiling surface. Most UK residential ceilings provide 100-150mm void depth, so this fitting is suitable for standard construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan these be dimmed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the CyroLED is compatible with trailing-edge dimmers. Leading-edge dimmer compatibility varies by manufacturer, so check with the dimmer supplier before specifying. Not all LED dimmers will work smoothly with all LED downlights.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":52475344191755,"sku":"CYRFS10","price":97.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/2124736_5a3fedcf-e7bf-41df-ad0e-fe496bf986f3.jpg?v=1760643120"},{"product_id":"fire-rated-warm-white-80mm-led-downlight","title":"Fire Rated Warm White 80mm LED Downlight","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\u003cp\u003eThe LED Fire Rated Downlight is a recessed luminaire built around a die-cast body and a Citizen LED light source. It gives a warm 2700K light and comes with an interchangeable aluminium bezel, available in a choice of five finishes. The bezel is ordered separately, so you can pair the fitting with the finish that best suits your ceiling and surrounding decor.\u003c\/p\u003e\u003cp\u003eThe fitting measures 80mm in diameter and holds a single integrated LED, with a maximum fitting wattage of 8.5W and an output of 623 lumens. It is supplied complete with the LED, so there is no separate lamp to buy, and it comes with a trailing edge dimmable driver for adjusting the light level. It carries an IP65 rating and is BS476 fire rated, and it is a Class 1 fitting suitable for interior use. The weight is 1kg.\u003c\/p\u003e\u003cp\u003eThis downlight suits kitchens, bathrooms, hallways and living spaces where you want a neat, recessed light with a warm tone. The IP65 rating means it can be used in zones where moisture is a factor, and the fire rating helps maintain the integrity of the ceiling. Because the bezel finish is chosen and ordered separately, please add your preferred finish to your order alongside the fitting. We are happy to help if you are unsure which options work together. Order from us online and we will get your downlights on their way to you. If you have questions about quantities, dimming or the finishes we offer, get in touch and we will talk it through before you buy.\u003c\/p\u003e\u003ch5\u003eSpecification\u003c\/h5\u003e\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Lamps\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Cap\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Wattage per Lamp\u003c\/td\u003e\n\u003ctd\u003e9W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Fitting Wattage\u003c\/td\u003e\n\u003ctd\u003e8.5W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e623lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003e2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical Class\u003c\/td\u003e\n\u003ctd\u003eClass 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamps Supplied\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable For\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\u003cp\u003e\u003cstrong\u003eIs a lamp included with this downlight?\u003c\/strong\u003e\u003cbr\u003eYes. It has an integrated Citizen LED light source supplied with the fitting, so there is no separate bulb to buy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the bezel included?\u003c\/strong\u003e\u003cbr\u003eThe interchangeable aluminium bezel is ordered separately. You can choose from five finishes and add your preferred one to your order alongside the fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this downlight be dimmed?\u003c\/strong\u003e\u003cbr\u003eYes. It is supplied with a trailing edge dimmable driver, so you can adjust the light level.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003cbr\u003eIt is rated IP65, which means it is protected against moisture and can be used in bathroom zones where water is a factor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it fire rated?\u003c\/strong\u003e\u003cbr\u003eYes. It is BS476 fire rated, which helps maintain the integrity of the ceiling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the size and output?\u003c\/strong\u003e\u003cbr\u003eIt is 80mm in diameter, with a maximum fitting wattage of 8.5W and an output of 623 lumens at a warm 2700K.\u003c\/p\u003e","brand":"Franklite","offers":[{"title":"Default Title","offer_id":53282691121419,"sku":"RF317D40L09GT00V","price":79.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RF317D40L09GT00V_1.jpg?v=1785559526"},{"product_id":"chrome-fire-rated-warm-white-80mm-led-downlight","title":"Chrome Fire Rated Warm White 80mm LED Downlight","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\u003cp\u003eThe LED Fire Rated Chrome Downlight is a die-cast recessed light with a chrome finish and an interchangeable chrome aluminium bezel. It uses a Citizen LED light source, so there is no separate bulb to fit and no glass or diffuser to worry about. The design sits neatly into the ceiling, giving a clean, low-profile look that works with most interior schemes. The bezel can be swapped if you prefer a different look later on.\u003c\/p\u003e\u003cp\u003eThis downlight measures 80mm in diameter and holds one integrated LED, with a maximum lamp wattage of 9W and a maximum fitting wattage of 8.5W. It gives 623 lumens at a warm 2700K colour temperature, and it comes with a trailing edge dimmable driver, so you can adjust the level to suit the room. It is rated IP65, which makes it suitable for use in bathroom zones, and it is BS476 fire rated for use in ceilings that need it. It is a Class 1 fitting weighing 1.10kg, and the lamp is supplied.\u003c\/p\u003e\u003cp\u003eBecause it is fire rated and IP65, this downlight suits kitchens, bathrooms, hallways and living spaces where you want a tidy, recessed finish. Being warm white at 2700K, it gives a soft light that works well in relaxing rooms as well as busier areas. Order as many as you need to plan your ceiling layout, and pair with a compatible trailing edge dimmer switch, bought separately, if you want to control brightness. If you would like help choosing quantities or checking compatibility, our team is happy to assist. We ship across the UK and worldwide, with free delivery over £99.\u003c\/p\u003e\u003ch5\u003eSpecification\u003c\/h5\u003e\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Lamps\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Cap\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Wattage per Lamp\u003c\/td\u003e\n\u003ctd\u003e9W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Fitting Wattage\u003c\/td\u003e\n\u003ctd\u003e8.5W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e623lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003e2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical Class\u003c\/td\u003e\n\u003ctd\u003eClass 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamps Supplied\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable For\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.10KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\u003cp\u003e\u003cstrong\u003eIs the LED bulb included?\u003c\/strong\u003e\u003cbr\u003eYes. This downlight has an integrated Citizen LED light source and comes with its trailing edge dimmable driver, so nothing extra is needed to light it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use this in a bathroom?\u003c\/strong\u003e\u003cbr\u003eYes. It is rated IP65 and suitable for interior use, which makes it appropriate for bathroom zones. Please check your zone requirements before installing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it fire rated?\u003c\/strong\u003e\u003cbr\u003eYes. It is BS476 fire rated, so it can be used in ceilings that require fire-rated downlights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003cbr\u003eYes. It is supplied with a trailing edge dimmable driver. You will need a compatible trailing edge dimmer switch, which is bought separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat colour of light does it give?\u003c\/strong\u003e\u003cbr\u003eIt gives a warm white light at 2700K, producing 623 lumens, which suits both relaxing and everyday rooms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the downlight?\u003c\/strong\u003e\u003cbr\u003eIt has an 80mm diameter and weighs 1.10kg. It is a Class 1 fitting with a maximum fitting wattage of 8.5W.\u003c\/p\u003e","brand":"Franklite","offers":[{"title":"Default Title","offer_id":53282691154187,"sku":"RF317D40L09GT00V\/BEZ001","price":86.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RF317D40L09GT00V-BEZ001_1.jpg?v=1785559527"},{"product_id":"white-fire-rated-warm-white-80mm-led-downlight","title":"White Fire Rated Warm White 80mm LED Downlight","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\u003cp\u003eThe LED Fire Rated White Downlight is a die-cast recessed fitting with a clean white bezel. The body is made from cast metal for a solid feel, and the aluminium bezel is interchangeable, so you can swap it if you want a different look later. The finish is a matt white that sits neatly against a plaster ceiling and keeps the fitting quiet within the surface. It uses a Citizen LED light source built into the unit rather than a separate bulb you fit yourself.\u003c\/p\u003e\u003cp\u003eThe downlight measures 80mm in diameter, giving a compact face that suits close spacing across a ceiling. It holds a single integrated LED rated at a maximum 9W, with a maximum fitting draw of 8.5W, and gives 623 lumens. The colour temperature is 2700K, a warm white that reads soft and comfortable. It is trailing edge dimmable and comes with the driver supplied, so you can set the level to suit the room. It carries an IP65 rating and is BS476 fire rated. It is Class 1 and weighs 1.10kg. Lamps are supplied, so there is nothing extra to buy for it to light.\u003c\/p\u003e\u003cp\u003eThe IP65 rating and fire rating make this a sensible choice for bathrooms, kitchens and hallways, as well as general ceilings where you want a low profile and a warm light. The warm 2700K tone works well in living spaces and bedrooms where you want a relaxed feel. We supply the downlight with its dimmable driver ready to install. If you want a different bezel colour, that is ordered separately. Buy from us online and we will send it out to you with everything listed here included.\u003c\/p\u003e\u003ch5\u003eSpecification\u003c\/h5\u003e\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Lamps\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Cap\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Wattage per Lamp\u003c\/td\u003e\n\u003ctd\u003e9W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Fitting Wattage\u003c\/td\u003e\n\u003ctd\u003e8.5W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e623lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003e2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical Class\u003c\/td\u003e\n\u003ctd\u003eClass 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamps Supplied\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable For\u003c\/td\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.10KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\u003cp\u003e\u003cstrong\u003eAre the lamps included?\u003c\/strong\u003e\u003cbr\u003eYes. This downlight has an integrated Citizen LED light source and is supplied ready to light, so there is nothing extra to buy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it suitable for a bathroom?\u003c\/strong\u003e\u003cbr\u003eYes. It is rated IP65, which suits bathrooms and other damp areas, and it is BS476 fire rated for use in ceilings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I dim it?\u003c\/strong\u003e\u003cbr\u003eYes. It is trailing edge dimmable and comes with the dimmable driver supplied. Use a compatible trailing edge dimmer switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat colour of light does it give?\u003c\/strong\u003e\u003cbr\u003eIt gives a warm white at 2700K, producing 623 lumens from a maximum 8.5W fitting draw.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the downlight?\u003c\/strong\u003e\u003cbr\u003eThe face measures 80mm in diameter, giving a compact fitting that suits close spacing across a ceiling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I change the bezel?\u003c\/strong\u003e\u003cbr\u003eYes. The white aluminium bezel is interchangeable. If you want a different colour, that is ordered separately.\u003c\/p\u003e","brand":"Franklite","offers":[{"title":"Default Title","offer_id":53282691219723,"sku":"RF317D40L09GT00V\/BEZ003","price":86.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RF317D40L09GT00V-BEZ003_1.jpg?v=1785559532"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/collections\/663616_9955333b-37a8-4ac0-908a-a9a08d3864b5.jpg?v=1791126153","url":"https:\/\/niori.co.uk\/collections\/fire-rated-downlights.oembed","provider":"Niori","version":"1.0","type":"link"}