{"title":"Downlight Bezels \u0026 Trims","description":"\u003cp\u003eA downlight bezel is the visible trim ring that frames a recessed light, and changing it is the quickest way to update a ceiling without replacing the fitting. We hand-pick bezels and trims in polished chrome, brushed chrome, brass, matt black and white, in fixed and magnetic styles to suit popular downlight ranges.\u003c\/p\u003e","products":[{"product_id":"fixed-bezel-for-spektroled-evo-downlight-white","title":"Fixed Bezel for SpektroLED Evo Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SpektroLED Evo fixed bezel is a 90mm diameter white steel trim that magnetically attaches to SpektroLED Evo fire-rated downlights. The bezel sits flush with the ceiling line, covering the junction between the downlight housing and the ceiling cutout with a 4mm-deep white steel ring.\u003c\/p\u003e\n\u003cp\u003eDesigned for installations where the downlight needs to blend into white or light-coloured ceilings, the fixed bezel provides a clean border around the light aperture without adding visual mass. The magnetic attachment allows the bezel to be removed for lamp access or redecorating without tools, and re-fitted by aligning the bezel over the downlight housing until the magnets engage.\u003c\/p\u003e\n\u003cp\u003eThe white powder-coated steel finish matches typical ceiling paint tones and resists discolouration from heat. The bezel is compatible with all SpektroLED Evo models including the dimmable tilt, RGB\/CCT smart and fire-rated variants, and can be swapped out for other bezel finishes in the range if interior colour schemes change.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\" style=\"width: 100%; height: 98px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.5717%; height: 19.6px;\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"width: 35.0674%; height: 19.6px;\"\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.5717%; height: 19.6px;\"\u003eDepth\u003c\/td\u003e\n\u003ctd style=\"width: 35.0674%; height: 19.6px;\"\u003e4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.5717%; height: 19.6px;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"width: 35.0674%; height: 19.6px;\"\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.5717%; height: 19.6px;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"width: 35.0674%; height: 19.6px;\"\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 62.5717%; height: 19.6px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"width: 35.0674%; height: 19.6px;\"\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174491_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights is this bezel compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel fits all Knightsbridge SpektroLED Evo downlight models, including the fire-rated, dimmable tilt, and RGB\/CCT smart variants. It will not fit other downlight ranges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the bezel attached?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel attaches magnetically to the SpektroLED Evo housing. Align the bezel over the downlight until the magnets engage. No tools or fixings are required, and the bezel can be removed for lamp access or ceiling repainting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be changed to a different finish later?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The magnetic attachment allows the white bezel to be swapped for other finishes in the SpektroLED Evo bezel range without re-wiring or modifying the downlight itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the bezel add significant projection from the ceiling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel is 4mm deep and sits flush with the ceiling line, adding minimal visual projection once fitted.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723681035,"sku":"SPKEVFBZW","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607288_ea628ba8-f7d9-4bc9-809b-023d9a80adfc.jpg?v=1714663273"},{"product_id":"fixed-bezel-for-spektroled-evo-downlight-matt-black","title":"Fixed Bezel for SpektroLED Evo Downlight - Matt Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis fixed bezel fits Knightsbridge SpektroLED Evo fire-rated downlights, providing a 90mm steel trim ring in matt black that sits flush to the ceiling surface. The bezel attaches magnetically to the downlight body, eliminating the need for screw fixings or clips and allowing the trim to be removed for redecorating or maintenance without disturbing the wiring.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installations where a matt black finish is needed to match door hardware, wall switches, or architectural metalwork, the bezel creates a defined edge around the downlight aperture. The 4mm depth keeps the profile minimal on standard plasterboard ceilings, while the steel construction provides rigidity to prevent warping or sagging over time.\u003c\/p\u003e\n\u003cp\u003eThe matt black powder-coated finish absorbs light rather than reflecting it, making the bezel less visible on dark ceilings and providing a clean monochrome accent on white or light-coloured ceilings. The magnetic attachment means the bezel can be swapped for a different finish (white, brushed chrome, polished chrome) without changing the downlight itself, giving flexibility to update the room's appearance without rewiring.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174542_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bezel is designed specifically for Knightsbridge SpektroLED Evo fire-rated downlights. It attaches magnetically to the downlight body and will not fit other downlight models or brands without compatible magnetic mounting.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan the bezel be changed after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The magnetic attachment allows the bezel to be removed and swapped for a different finish (white, brushed chrome, polished chrome) without disturbing the downlight wiring or ceiling cut-out. This is useful when redecorating or updating the room's colour scheme.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDoes the bezel affect the downlight's fire rating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The bezel is a cosmetic trim component. The fire rating is provided by the downlight body itself and the fire hood fitted above the ceiling. Changing the bezel does not alter the fire-rating performance.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces SpektroLED Evo bezels in white, matt black, brushed chrome and polished chrome. Use the site search or filter by vendor and finish to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723713803,"sku":"SPKEVFBZMB","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607284_54e050a9-b886-4dc0-bc8a-27d07d13dc57.jpg?v=1714663275"},{"product_id":"fixed-bezel-for-spektroled-evo-downlight-polished-chrome","title":"Fixed Bezel for SpektroLED Evo Downlight - Polished Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis fixed bezel is a magnetic polished chrome trim ring designed specifically for the Knightsbridge SpektroLED Evo range of IP65 fire-rated downlights. The bezel measures 90mm in diameter with a 4mm depth and clips magnetically onto the downlight housing, giving a flush finish against the ceiling surface with no visible fixings.\u003c\/p\u003e\n\u003cp\u003eThe magnetic attachment allows the bezel to be fitted and removed without tools during installation, redecoration or lamp replacement. The polished chrome finish provides a high-gloss mirrored edge around the downlight aperture, contrasting with white or neutral ceilings and pairing well with chrome taps, handles and other polished metal fixtures in kitchens and hallways.\u003c\/p\u003e\n\u003cp\u003eConstructed from steel with a durable electroplated chrome coating, the bezel adds a decorative element to the functional SpektroLED Evo downlight. The 90mm outer diameter suits standard UK downlight cutouts and the minimal 4mm projection keeps the bezel close to the ceiling plane, reducing dust collection and glare from oblique viewing angles.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174545_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights is this bezel compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bezel is designed for the Knightsbridge SpektroLED Evo IP65 fire-rated downlight range. It attaches magnetically to the downlight housing and will not fit other downlight models or brands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the magnetic attachment affect the IP65 rating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. When the bezel is correctly seated on the SpektroLED Evo downlight, the IP65 ingress protection rating is maintained. The magnetic grip holds the bezel flush against the housing gasket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be removed for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The magnetic attachment allows the bezel to be lifted off without tools, making it easy to mask the downlight aperture when painting ceilings. The bezel clips back on after redecoration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces the SpektroLED Evo bezel in multiple finishes including brushed chrome, white, matt black and antique brass. Use the search function or filters to find other finishes in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723746571,"sku":"SPKEVFBZPC","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607286_1e3f2063-3714-48e8-aa79-fc8c19431e2c.jpg?v=1714663277"},{"product_id":"fixed-bezel-for-spektroled-evo-downlight-brushed-brass","title":"Fixed Bezel for SpektroLED Evo Downlight - Brushed Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis fixed bezel is designed specifically for the Knightsbridge SpektroLED Evo range of downlights. The 90mm diameter steel ring carries a brushed brass finish with visible directional grain that softens reflections compared to polished brass. Magnetic mounting clips the bezel directly onto the Evo downlight body without tools or screws, allowing it to be swapped for other finish options in the same range.\u003c\/p\u003e\n\u003cp\u003eThe bezel sits flush with the ceiling surface once fitted, giving a defined edge to the downlight aperture. In residential contexts it suits rooms where warm metallic accents are already present in door furniture, light switches or tap finishes. In hospitality and commercial settings it provides a coordinated finish across multiple downlights without the need to replace entire fittings when redecorating.\u003c\/p\u003e\n\u003cp\u003eThe 4mm depth means the bezel adds minimal projection below the ceiling plane. The steel construction gives structural rigidity that prevents warping under heat from the LED unit beneath. The brushed finish on the brass hides minor marks and fingerprints during installation and routine cleaning.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174556_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich SpektroLED models does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis fixed bezel is compatible with all SpektroLED Evo downlights, including the dimmable tilt fire-rated 4-CCT model. The magnetic mount system is standardised across the Evo range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the bezel installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel uses magnetic mounting and clips directly onto the Evo downlight body once the downlight is fitted in the ceiling. No tools or screws are required. The bezel can be removed and replaced with a different finish without disturbing the downlight wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces fixed and tilt bezels for the SpektroLED Evo range in multiple finishes including white, brushed chrome, polished chrome, black and satin nickel. Use the search function or filters at Niori to find other variants in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723812107,"sku":"SPKEVFBZB","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607280_7b7808e6-6e25-46be-8d10-61f20f99c042.jpg?v=1714663279"},{"product_id":"fixed-bezel-for-spektroled-evo-downlight-antique-brass","title":"Fixed Bezel For SpektroLED Evo Downlight - Antique Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge fixed bezel is a 90mm-diameter steel trim ring for the SpektroLED Evo range of IP65 fire-rated LED downlights, finished in antique brass. The bezel attaches magnetically to the downlight housing, allowing tool-free installation and removal for redecorating or maintenance without needing to disconnect wiring.\u003c\/p\u003e\n\u003cp\u003eDesigned as an interchangeable trim accessory, the bezel allows a single SpektroLED Evo downlight to be switched between finishes to match different room schemes or to replace a damaged or tarnished bezel without replacing the entire fitting. The 4mm depth sits nearly flush with the ceiling once fitted, giving a low-profile appearance that works in both traditional and contemporary installations.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish provides a warm, aged metallic tone that pairs well with period features, heritage properties and warm-toned interiors. The steel construction withstands the heat generated by LED downlights without warping or discolouration over typical residential use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174560_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich SpektroLED downlights is this compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bezel fits the SpektroLED Evo range of IP65 fire-rated LED downlights. It attaches magnetically to the downlight housing and is interchangeable with other SpektroLED Evo bezels in different finishes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the bezel fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel attaches magnetically to the SpektroLED Evo downlight housing. No tools or screws are required. The bezel can be removed and replaced at any time without disconnecting wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces SpektroLED Evo bezels in a range of finishes including white, chrome, brushed chrome, black, and antique brass. Use the search function to find other variants in stock at Niori.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be cleaned?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe gently with a dry, soft microfibre cloth. For more stubborn marks, a barely-damp cloth is acceptable, but avoid soaking the metal and do not use household sprays or polishes that may strip the antique finish.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723844875,"sku":"SPKEVFBZAB","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607278_bd1a68a7-f7d6-41c5-b734-3e8fbc539756.jpg?v=1714663281"},{"product_id":"fixed-bezel-for-spektroled-evo-downlight-brushed-chrome","title":"Fixed Bezel for SpektroLED Evo Downlight - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge fixed bezel is a 90mm diameter steel trim ring designed for SpektroLED Evo fire-rated downlights, finished in brushed chrome. The bezel attaches magnetically to the downlight body, allowing the trim to be fitted or removed without tools for redecorating or servicing the fitting behind.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installations where a fixed (non-adjustable) bezel is preferred, this trim ring sits 4mm proud of the ceiling surface once the downlight is recessed. The brushed chrome finish provides a neutral metallic accent that pairs with both warm and cool-toned interiors, and the directional brushing on the steel softens light reflections compared to polished chrome.\u003c\/p\u003e\n\u003cp\u003eThe magnetic attachment means the bezel can be lifted off the downlight body without disturbing the electrical connection or ceiling cut-out, making it straightforward to paint around the downlight or replace the bezel with a different finish from the SpektroLED Evo range. The 5-year warranty covers manufacturing defects in the steel and finish.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174564_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights is this bezel compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bezel is designed specifically for the Knightsbridge SpektroLED Evo range of IP65 fire-rated downlights. It attaches magnetically to the downlight body and will not fit other downlight models or brands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the bezel attached?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel uses magnetic attachment. Once the SpektroLED Evo downlight is installed in the ceiling, the bezel simply snaps onto the downlight body via the integrated magnets. No screws or clips are needed, and the bezel can be removed by hand for redecorating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be swapped for a different finish?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The magnetic attachment allows you to remove this brushed chrome bezel and replace it with a different finish from the SpektroLED Evo bezel range (such as white, black or polished chrome) without re-wiring or disturbing the ceiling cut-out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the projection from the ceiling once fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel adds 4mm of depth once the downlight is recessed. The downlight body itself sits above the ceiling line, so only the 4mm bezel edge and the lens are visible below the ceiling surface.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293724270859,"sku":"SPKEVFBZBC","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607282_b117fea2-f61a-4411-acc6-3b8ad010f8d5.jpg?v=1714663283"},{"product_id":"bezel-for-cfr-ip65-downlight-brass","title":"Bezel for CFR IP65 Downlight - Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis brass finish bezel is designed to fit Knightsbridge CFR IP65 downlights, providing a trim ring that covers the cut-out edge and defines the downlight aperture against the ceiling surface. The bezel measures 87mm diameter with a 6mm projection from the ceiling plane, creating a visible border around the white diffuser.\u003c\/p\u003e\n\u003cp\u003eIntended for use in rooms where the downlight finish needs to coordinate with other brass fixtures such as light switches, door handles or cabinet hardware, the bezel clips onto the CFR downlight body after installation. The polished brass finish provides a warm metallic accent that works in both traditional and contemporary settings where brass tones are part of the interior palette.\u003c\/p\u003e\n\u003cp\u003eThe bezel is constructed from ABS plastic with a brass-effect finish rather than solid metal, keeping the weight low. The finish is polished rather than brushed, so it presents as a high-shine surface that reflects light from adjacent sources.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3452815_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights is this bezel compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bezel fits Knightsbridge CFR IP65 downlights. It is not compatible with other downlight ranges or manufacturers. Check the Knightsbridge product code on your existing downlight before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bezel solid brass or brass-finished?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel is ABS plastic with a polished brass-effect finish, not solid brass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel itself does not carry an IP rating. It is designed to fit CFR IP65 downlights, which are rated for bathroom use. The bezel does not compromise the IP65 rating of the downlight when fitted correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the bezel fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel clips onto the CFR downlight body after the downlight has been installed in the ceiling. It covers the cut-out edge and sits flush against the ceiling surface with a 6mm projection.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293751828747,"sku":"CFRB","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/208880_fcdcbc58-4ef8-482a-a660-596c2ec2f49b.jpg?v=1714663696"},{"product_id":"bezel-for-cfr-ip65-downlight-brushed-chrome","title":"Bezel for CFR IP65 Downlight - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis brushed chrome bezel fits Knightsbridge CFR IP65 downlights, providing a decorative surround ring that sits flush against the ceiling around the downlight aperture. The bezel is constructed from ABS polymer with a brushed metallic finish that replicates the appearance of brushed chrome metal at a lower weight and cost than solid metal bezels.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with CFR-series downlights in bathrooms, kitchens, utility rooms and other wet-rated applications, the bezel covers the junction between the downlight housing and the ceiling cut-out, giving a cleaner visual finish than the bare downlight rim. The 87mm diameter suits standard 70-75mm ceiling apertures used for CFR downlights, and the 6mm projection extends slightly beyond the ceiling plane to create a defined edge.\u003c\/p\u003e\n\u003cp\u003eThe brushed finish on the ABS mimics directional grain similar to brushed stainless steel or brushed nickel, reducing fingerprint visibility and pairing well with brushed or satin-finish bathroom and kitchen fixtures. The lightweight ABS construction makes the bezel easier to handle during installation than metal alternatives, and the material will not corrode in humid environments.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3424609_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bezel is designed specifically for Knightsbridge CFR IP65 downlights. It will not fit other downlight models or brands. Check your existing downlight model number before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bezel sold separately from the downlight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. This is a replacement or upgrade bezel sold as a separate accessory. The CFR downlight itself is sold separately and does not include this bezel as standard unless specified in a bundle listing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The bezel is compatible with CFR IP65-rated downlights, which are suitable for bathroom zones 1 and 2. The ABS construction resists moisture and humidity without corroding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available for CFR bezels?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces CFR bezels in several finishes including white, polished chrome, satin chrome and brushed nickel. Use the search function or product filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293752615179,"sku":"CFRBC","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1661032_f8e84da4-b5dc-4132-acd4-7d3caa893453.jpg?v=1714663699"},{"product_id":"matt-black-bezel-for-cfr-ip65-downlight-87mm","title":"Matt Black Bezel for CFR IP65 Downlight - 87mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis matt black bezel fits Knightsbridge CFR IP65 downlights, providing a finished trim ring around the light aperture. The 87mm diameter bezel is moulded from ABS plastic with a matt black finish and sits 6mm proud of the ceiling surface once installed, concealing the cut-out edge and giving a clean transition between the light fitting and the ceiling plane.\u003c\/p\u003e\n\u003cp\u003eDesigned for use in bathrooms, wet rooms and covered outdoor locations where CFR IP65 downlights are installed, the bezel clips onto the downlight housing after the fitting is secured in the ceiling void. The matt black finish suits contemporary bathroom schemes, dark-toned ceilings, and installations where the trim ring needs to recede visually rather than draw attention.\u003c\/p\u003e\n\u003cp\u003eThe ABS construction is lightweight, impact-resistant and does not corrode in damp environments. The bezel is sold separately from the CFR downlight itself, allowing replacement if the finish is damaged during redecoration or allowing a finish change without replacing the entire fitting. The matt surface reduces glare and fingerprint visibility compared to gloss or metallic finishes.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4001595_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bezel is compatible with Knightsbridge CFR IP65 downlights. It will not fit other downlight ranges or non-Knightsbridge fittings. Check the downlight model code before ordering to confirm compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bezel sold with the downlight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The bezel is sold separately, allowing you to choose the finish that suits your ceiling colour and interior scheme. CFR downlights are available with various bezel options including white, chrome, brushed chrome and matt black.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be removed and replaced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The bezel clips onto the downlight housing and can be removed for redecorating or finish changes without rewiring or removing the downlight from the ceiling void.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ABS construction is suitable for covered outdoor locations such as porch ceilings and eaves soffits where the downlight itself carries an IP65 rating. The bezel does not add or subtract from the IP rating of the downlight it is fitted to.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293755007243,"sku":"CFRMB","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/451736_e9f0bec2-b9ce-4c4d-83fb-bf4c682614b4.jpg?v=1714663701"},{"product_id":"polished-chrome-bezel-for-cfr-ip65-downlight-87mm","title":"Polished Chrome Bezel for CFR IP65 Downlight - 87mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis polished chrome bezel is a replacement or spare trim ring for Knightsbridge CFR IP65 fire-rated downlight fittings. The 87mm diameter ABS ring sits flush against the ceiling surface with a 6mm projection depth, concealing the cut-out edge and providing the visible finish around the lamp aperture.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with CFR downlight housings already installed in ceilings, the bezel allows the visible finish to be changed without replacing the entire fitting or re-cutting the ceiling aperture. The polished chrome finish provides a reflective metallic accent that pairs with contemporary kitchens and hallways using chrome taps, handles and fixtures.\u003c\/p\u003e\n\u003cp\u003eThe ABS construction keeps the bezel lightweight while maintaining dimensional stability under the heat cycles of a recessed downlight. The 5-year warranty matches the warranty period on the CFR downlight housing itself, allowing the bezel to be replaced under warranty if the finish degrades or the material warps.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3421089_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bezel is compatible with Knightsbridge CFR IP65 fire-rated downlight housings. It will not fit other downlight ranges or non-Knightsbridge fittings — check the model code on your existing downlight before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this to change the finish of an existing downlight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. If you have CFR downlights already installed and want to change from one finish to another (for example, from white to polished chrome after redecorating), you can purchase replacement bezels without removing or replacing the downlight housing itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bezel sold with the lamp or separately?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is sold as a bezel only. The CFR downlight housing, lamp holder and any bulbs are sold separately. If you are installing a new downlight from scratch, purchase the complete CFR downlight kit rather than individual components.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293755072779,"sku":"CFRPC","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/208862_c3a88a91-ab5a-40f3-affd-c1c37fef2bbc.jpg?v=1714663704"},{"product_id":"knightsbridge-cfr-downlight-bezel-white-87mm","title":"CFR Downlight Bezel - White 87mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge bezel is an 87mm white ABS trim ring designed to fit CFR IP65 downlights. The bezel clips onto the downlight rim after installation, creating a finished edge against the ceiling surface and concealing the cut-out edge of the ceiling aperture. The 6mm projection from the ceiling plane gives a subtle raised profile without creating a shadow line in most installations.\u003c\/p\u003e\n\u003cp\u003eThe bezel is typically used when a CFR downlight is recessed into plasterboard, MDF or another ceiling material where the cut-out edge needs to be hidden. It's also used to provide a consistent visual finish across multiple downlights in a room, particularly when ceiling materials vary or cut-outs are slightly irregular. The white finish matches standard white ceiling paint and blends into the background rather than drawing attention to the fitting itself.\u003c\/p\u003e\n\u003cp\u003eMade from ABS plastic, the bezel is lightweight and clips securely without requiring separate fixings once the downlight body is installed. The 87mm diameter is specific to the Knightsbridge CFR range — this bezel will not fit other downlight models or brands without checking compatibility first. ABS resists discolouration from heat better than cheaper plastics, though the fitting should only be paired with LED lamps within the CFR's rated wattage to avoid excessive heat buildup.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3452825_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this bezel compatible with other downlight brands?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This bezel is designed specifically for Knightsbridge CFR IP65 downlights with an 87mm trim diameter. It will not fit downlights from other manufacturers or other Knightsbridge ranges without checking the exact trim size first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the bezel come with the downlight or is it sold separately?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel is sold separately as a replacement or alternate finish option. Some CFR downlights include a bezel in the box, but if you need a different finish or a replacement, this item is purchased individually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be painted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eABS plastic can be painted with acrylic or plastic-compatible paints after light sanding to improve adhesion, but painting may affect heat dissipation and is not recommended by the manufacturer. If you need a different colour, check whether Knightsbridge offers the CFR bezel in that finish as a factory option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty period?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel carries a 5-year warranty from Knightsbridge, covering defects in material and construction under normal use.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293755105547,"sku":"CFRW","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/208882_3999910c-e81a-4078-8b98-a60f33b0520c.jpg?v=1714663706"},{"product_id":"glistenis-77mm-round-downlight-trim-frame-black","title":"Glistenis Round Downlight Trim Frame 77mm - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Glistenis is a 77mm diameter round trim frame designed to fit over recessed downlight fittings, providing a finished architectural edge in deep black. The frame clips or screws onto the downlight housing once the fitting is installed in the ceiling void, concealing the cut edge of the plasterboard and creating a defined border between the ceiling surface and the light aperture.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with compatible recessed LED downlights in residential and commercial spaces, the trim serves both decorative and functional purposes. The black finish creates contrast against white or light-coloured ceilings, defining the downlight position as a deliberate design feature rather than a hidden utility. The inner profile reduces direct glare by recessing the light source slightly behind the ceiling plane, making the fitting more comfortable to view from below in hallways, offices and retail environments.\u003c\/p\u003e\n\u003cp\u003eThe 77mm outer diameter suits compact downlight fittings with 60-70mm apertures, typically used in lower ceilings or where multiple downlights are spaced closely along a corridor or display shelf. The black powder-coated aluminium construction maintains colour consistency under heat from the downlight and resists tarnishing over the fitting's lifetime. Installation requires no special tools — the frame either clips directly onto the downlight body or fixes with small screws depending on the downlight model.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter (mm)\u003c\/td\u003e\n\u003ctd\u003e77\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Glistenis 77mm trim is designed for use with Ideal Lux recessed downlight ranges that accept interchangeable trim rings. Check the downlight specification or contact us to confirm compatibility with your specific model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the frame fixed or removable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe frame is removable, allowing you to change trim colours or replace the downlight without redecorating the ceiling. Fixing method depends on the downlight model — some use spring clips, others use small fixing screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the black finish affect light output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe black inner surface absorbs some reflected light compared to a white or reflective trim, resulting in a slightly lower overall light output and a more focused beam. This trade-off is intentional for the architectural look and glare reduction the black trim provides.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in fire-rated downlights?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnly if the downlight itself is fire-rated and the manufacturer specifies this trim as compatible without voiding the fire rating. Check the downlight's certification documentation before fitting.\u003c\/p\u003e","brand":"Ideal Lux","offers":[{"title":"Default Title","offer_id":45733331501323,"sku":"323527","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/323527_LOC001_ZEUS_FRAME_TRIM_ROUND_13W_BK_f0c28c52-7d97-495c-9cf5-ea5dfadba6d8.jpg?v=1724713125"},{"product_id":"glistenis-square-trim-frame-78mm-black","title":"Glistenis Square Trim Frame 78mm - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Glistenis is a 78mm square trim frame in matt black, designed to sit around the rim of a recessed downlight fitting and provide a clean finished edge to the ceiling aperture. The frame clips or screws onto compatible Ideal Lux downlight housings, concealing the rough edge of the ceiling cut-out and holding the fitting flush to the plasterwork.\u003c\/p\u003e\n\u003cp\u003eTrim frames like the Glistenis are used when a downlight housing is recessed into a ceiling void but the installer or designer wants a defined edge around the light aperture rather than a bare hole. The 78mm square format suits downlights with a similar aperture dimension, and the matt black finish provides a visible border that can either contrast with white ceilings or blend into dark-painted or black ceilings. This is common in retail, hospitality and residential interiors where the ceiling grid or downlight positions are meant to be visible as part of the design.\u003c\/p\u003e\n\u003cp\u003eThe frame measures 78mm on each side and sits approximately flush with the ceiling surface once installed, adding minimal projection. The matt black finish is powder-coated or painted onto the metal frame, providing a low-sheen surface that does not reflect ceiling light back into the room. Ideal Lux rates the frame with a 5-year warranty, indicating it is built to remain secure and retain finish quality over typical commercial and residential use cycles.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength (mm)\u003c\/td\u003e\n\u003ctd\u003e78\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection (mm)\u003c\/td\u003e\n\u003ctd\u003e78\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights is the Glistenis frame compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 78mm square format is designed to pair with Ideal Lux downlights that have a matching aperture dimension. Check the downlight specification or contact us to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the frame affect the light output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe trim frame sits around the rim of the downlight aperture and does not obstruct the light path. It may reduce the beam spread very slightly at extreme angles, but this is negligible in typical installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used with LED downlights?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Glistenis is a cosmetic trim frame and does not affect the electrical or thermal performance of the downlight. It works with LED, halogen and other lamp types that fit the compatible housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe frame clips or screws onto the downlight housing after the housing is recessed into the ceiling void. Installation method depends on the specific downlight model, but most use spring clips or small screws to hold the trim frame against the ceiling surface.\u003c\/p\u003e","brand":"Ideal Lux","offers":[{"title":"Default Title","offer_id":45733331534091,"sku":"323534","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/323534_LOC001_ZEUS_FRAME_TRIM_SQUARE_13W_BK_f8e129aa-e003-4c28-9407-d6c5ee9e58cc.jpg?v=1724713152"},{"product_id":"glistenis-square-trim-frame-106mm-black","title":"Glistenis Square Trim Frame 106mm - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Glistenis is a 106mm square trim frame in black, designed to fit around recessed downlights and provide a clean architectural edge at ceiling level. The frame sits flush with the plasterwork and masks the rough-cut aperture around the downlight, giving a finished appearance to the installation.\u003c\/p\u003e\n\u003cp\u003eUsed in residential and commercial spaces where recessed downlights need a defined border, the black finish suits modern, industrial and monochrome interiors. The square aperture directs light downward and reduces peripheral glare, which is useful in kitchens, offices, galleries and retail spaces where controlled beam spread matters. The frame fits standard 106mm downlight cut-outs and is compatible with a range of Ideal Lux and third-party recessed fittings.\u003c\/p\u003e\n\u003cp\u003eThe black powder-coated finish provides a matt surface that absorbs rather than reflects ceiling light, keeping visual focus on the downlight itself. At 106mm square, the frame suits medium to large recessed fittings and works in ceiling heights of 2.4m or above where the proportions remain balanced. Installation involves clipping the frame onto the downlight housing before or after the fitting is recessed into the ceiling void.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength (mm)\u003c\/td\u003e\n\u003ctd\u003e106\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection (mm)\u003c\/td\u003e\n\u003ctd\u003e106\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat downlights does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Glistenis 106mm square trim fits standard 106mm downlight cut-outs and is compatible with a range of Ideal Lux recessed fittings. Check the downlight specifications to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the trim reduce glare?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The square aperture frames the light source and directs the beam downward, reducing peripheral glare compared to downlights installed without a trim frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the trim be installed after the downlight is fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInstallation depends on the downlight model. Some recessed fittings allow the trim to clip on after installation, while others require the trim to be attached before the fitting is recessed into the ceiling void. Consult the downlight fitting instructions.\u003c\/p\u003e","brand":"Ideal Lux","offers":[{"title":"Default Title","offer_id":45733336940811,"sku":"323718","price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/323718_LOC001_ZEUS_FRAME_TRIM_SQUARE_21W_BK_7caa578c-7c25-44b7-b6ef-98e0aa551833.jpg?v=1724713159"},{"product_id":"glistenis-round-downlight-trim-frame-109mm-black-gold","title":"Glistenis Round Downlight Trim Frame 109mm - Black \u0026 Gold","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Glistenis is a 109mm round downlight trim frame combining a matt black outer rim with a polished gold reflector cone and central baffle. The trim fits over the bezel of a recessed downlight to provide a finished edge at ceiling level and to focus the beam path, reducing peripheral glare and ceiling wash.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with recessed LED downlights in residential, hospitality and retail settings, the Glistenis pairs decorative finish with functional benefit. The polished gold reflector intensifies light output from the downlight while adding warmth to the reflected light. The deep matt black rim contrasts sharply against white or light-coloured ceilings, giving each downlight position definition, or sits flush and unobtrusive against dark ceilings. The central recessed baffle cuts glare when viewing the downlight from an angle.\u003c\/p\u003e\n\u003cp\u003eThe 109mm diameter suits mid-size recessed downlights common in UK ceiling installations. The frame is surface-mounted over the downlight bezel after the downlight itself is installed and wired, so no electrical work is required to fit the trim. The combination of black and polished gold works particularly well in contemporary, art-deco-inspired and warm-toned interiors where metallic accents are already present in furniture or architectural detail.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter (mm)\u003c\/td\u003e\n\u003ctd\u003e109\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat downlights does this trim fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Glistenis is designed to fit recessed downlights with a 109mm bezel diameter. Check your downlight's outer bezel measurement before ordering. The trim sits over the bezel and is not downlight-brand-specific.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it reduce glare?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The recessed central baffle and the angled reflector cone both work to cut glare when viewing the downlight from an angle, making the light more comfortable in spaces where you sit or stand beneath the fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the gold reflector real metal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe reflector is finished in polished gold-effect coating. It is not solid gold, but the polished surface intensifies light output and adds warmth to the reflected light in the same way a metallic reflector would.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe trim frame sits over the downlight bezel after the downlight is installed and wired. No electrical work is needed to fit the trim — it is a purely decorative and optical accessory that clips or sits in place over the existing downlight.\u003c\/p\u003e","brand":"Ideal Lux","offers":[{"title":"Default Title","offer_id":45733338906891,"sku":"324005","price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/324005_LOC001_ZEUS_FRAME_TRIM_ROUND_21W_BK_69f50750-73b2-4dbf-933b-fb3825fe264e.jpg?v=1724713139"},{"product_id":"glistenis-round-downlight-trim-frame-77mm-white","title":"Glistenis Round Downlight Trim Frame 77mm - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Glistenis is a 77mm round trim frame designed to fit over the aperture of recessed downlight fittings, concealing the cut-out edge and providing a clean white bezel around the lamp. The frame clips onto compatible Ideal Lux downlight housings, covering the gap between the fitting and the ceiling cut-out to give a finished appearance.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with 50-70mm recessed downlights in residential and commercial ceilings, the Glistenis trim frame suits kitchens, hallways and retail spaces where a clean white finish is preferred. The 77mm outer diameter covers typical ceiling cut-outs for small-to-medium recessed fittings while the internal aperture allows the downlight beam to pass through without obstruction. The white finish blends with white and light-coloured ceilings, reducing visual contrast between the fitting and the ceiling plane.\u003c\/p\u003e\n\u003cp\u003eThe frame is manufactured from durable polymer with a matt white surface that resists minor scuffs during installation. The material remains stable under typical ceiling temperatures and does not yellow over time when paired with LED downlights. Installation requires no tools — the frame clips into place over the downlight housing after the fitting has been recessed into the ceiling. Ideal Lux provides a 5-year warranty on the frame.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter (mm)\u003c\/td\u003e\n\u003ctd\u003e77\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights is this frame compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Glistenis trim frame is designed for Ideal Lux recessed downlight housings with a compatible mounting system. The 77mm outer diameter typically suits 50-70mm recessed fittings. Check the downlight housing specifications or contact us to confirm compatibility with your specific fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the frame installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe frame clips onto the downlight housing after the housing has been recessed into the ceiling and wired. No tools are required — the frame simply pushes into place around the housing rim and holds itself by spring tension or clip retention depending on the housing design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the frame be removed for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The frame can be unclipped from the housing, allowing the ceiling around the downlight to be repainted or redecorated, then re-clipped into place without disturbing the wiring or the recessed housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the frame reduce the light output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The internal aperture is sized to allow the downlight beam to pass through without obstruction. The frame conceals the cut-out edge but does not mask or reduce the effective beam angle or lumen output of the downlight.\u003c\/p\u003e","brand":"Ideal Lux","offers":[{"title":"Default Title","offer_id":45733339169035,"sku":"324869","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/324869_WEB001_ZEUS_FRAME_TRIM_ROUND_13W_WH_8226b48d-fd75-4fa8-956a-3677e54cce9f.jpg?v=1729181243"},{"product_id":"glistenis-square-downlight-trim-frame-78mm-white","title":"Glistenis Square Downlight Trim Frame 78mm - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Glistenis is a 78mm square trim frame in white, designed to finish the perimeter of a recessed downlight and reduce glare from the exposed lamp. The frame sits flush with the ceiling surface once the downlight is fitted, providing a clean geometric border around the light source. It fits standard 78mm ceiling cutouts used across a wide range of recessed LED and halogen downlight models.\u003c\/p\u003e\n\u003cp\u003eThe trim frame is used in kitchens, hallways and commercial spaces where the aim is to soften the visual transition between the ceiling and the recessed fitting. By recessing the lamp slightly behind the frame edge, direct glare is reduced for anyone viewing the fitting at an angle. The white finish blends with standard white and off-white ceilings, making the fitting less visually prominent than bare metal or chrome bezels.\u003c\/p\u003e\n\u003cp\u003eThe frame is manufactured from thermoplastic material with a matt white finish that resists minor impact and typical kitchen humidity. At 78mm square it pairs with both circular and square recessed downlights of equivalent cutout diameter. The 5-year warranty from Ideal Lux covers manufacturing defects in the frame material and finish.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength (mm)\u003c\/td\u003e\n\u003ctd\u003e78\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection (mm)\u003c\/td\u003e\n\u003ctd\u003e78\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat downlight models does this frame fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Glistenis trim fits recessed downlights with a 78mm ceiling cutout. This is a common dimension across many LED and halogen recessed fittings. Check the cutout specification of your downlight before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the frame reduce glare?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The trim recesses the lamp slightly behind the ceiling plane, which reduces direct glare for anyone viewing the fitting at an angle. It does not eliminate glare entirely if you look directly into the fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It has no stated IP rating, so it is for dry rooms only. The frame itself is thermoplastic. The trim does not add IP protection on its own.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for retrofit installations?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The trim can be fitted to existing recessed downlights with a 78mm cutout as a retrofit upgrade, provided the downlight model allows for trim attachment.\u003c\/p\u003e","brand":"Ideal Lux","offers":[{"title":"Default Title","offer_id":45733339201803,"sku":"324876","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/324876_WEB001_ZEUS_FRAME_TRIM_SQUARE_13W_WH_373c0b39-f3c9-4e39-8377-f2c04002e86d.jpg?v=1729181220"},{"product_id":"glistenis-109mm-round-downlight-trim-frame-white","title":"Glistenis Round Downlight Trim Frame 109mm - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Glistenis is a 109mm diameter round trim frame designed to fit around recessed downlights, providing a finished edge where the fitting meets the ceiling and reducing glare by concealing the lamp recessed inside the void. The white finish is a neutral match for most residential and commercial ceiling finishes.\u003c\/p\u003e\n\u003cp\u003eInstalled in living rooms, kitchens, hallways and commercial spaces, the trim frame fits over the downlight housing after the main fitting has been recessed into the ceiling void. The frame sits flush with the plasterboard or plaster surface, giving a clean aperture edge that defines the light source and controls the beam angle by blocking off-axis light spill. This makes the downlight more directional and reduces the visual brightness of the lamp when viewed from oblique angles.\u003c\/p\u003e\n\u003cp\u003eThe white-painted metal construction holds its shape against minor ceiling movement and thermal expansion from the downlight heat output. The 109mm outer diameter is a standard size compatible with most recessed downlight housings rated for 50-75mm cutouts, though exact compatibility depends on the specific downlight model. The frame adds minimal visual projection from the ceiling plane once installed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter (mm)\u003c\/td\u003e\n\u003ctd\u003e109\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat downlights is this compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 109mm outer diameter suits most recessed downlights with cutout diameters between 50mm and 75mm. Check your downlight housing specifications before ordering to confirm the trim frame will sit correctly over the lip of the recessed fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it reduce glare?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The trim frame blocks off-axis light spill and conceals the lamp recessed inside the ceiling void, making the downlight less visually bright when viewed from the side and directing more light downward.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be painted to match the ceiling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe white finish is pre-applied and designed to match standard white ceilings. While technically paintable, repainting metal trim frames risks uneven finish and paint adhesion issues. If a different colour is needed, check if Ideal Lux produces the Glistenis trim in other finishes.\u003c\/p\u003e","brand":"Ideal Lux","offers":[{"title":"Default Title","offer_id":45733339234571,"sku":"324883","price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/324883_WEB001_ZEUS_FRAME_TRIM_ROUND_21W_WH_d052ef3c-d029-49dc-bd75-b3a70e7eac25.jpg?v=1729181250"},{"product_id":"glistenis-trim-square-frame-106mm-white","title":"Glistenis Trim Square Frame 106mm - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Glistenis is a 106mm square trim frame in white, designed to fit around recessed downlight housings to create a clean architectural finish between the ceiling surface and the light aperture. The frame measures 106mm × 106mm and mounts flush to the ceiling, covering the cut-out edge and concealing minor imperfections in the plasterwork around the downlight hole.\u003c\/p\u003e\n\u003cp\u003eUsed in commercial installations, offices, retail spaces and residential rooms where recessed downlights are fitted into plasterboard or suspended ceilings, the frame provides a defined border that separates the light fitting from the ceiling plane. The 106mm dimension suits larger downlight housings where the aperture is typically 90-100mm in diameter, giving approximately 3-8mm of overlap on all sides to hide the ceiling cut-out edge.\u003c\/p\u003e\n\u003cp\u003eThe white finish matches standard ceiling paint colours (brilliant white, soft sheen white) and can be over-painted after installation if needed to match exact ceiling tones. The frame is constructed from rigid polymer with a matt surface that resists yellowing under heat from halogen or high-output LED downlights. The square geometry suits contemporary interiors and grid ceiling layouts where multiple downlights are spaced at regular intervals.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength (mm)\u003c\/td\u003e\n\u003ctd\u003e106\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection (mm)\u003c\/td\u003e\n\u003ctd\u003e106\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size downlight does this frame fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 106mm square frame suits downlight housings with apertures between 90mm and 100mm diameter. Measure the visible aperture of your downlight before ordering to confirm compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the frame be painted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The white polymer surface accepts emulsion and acrylic ceiling paints. Lightly sand the surface with 240-grit paper before painting for better adhesion, and allow the paint to cure fully before installing the downlight to avoid heat damage to wet paint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the frame fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe frame clips or sits over the downlight housing after the housing is installed in the ceiling. Some Ideal Lux downlight models have spring clips that hold the frame in place, while others rely on the downlight bezel pressing the frame against the ceiling surface. Refer to the downlight manufacturer's instructions for the specific fixing method.\u003c\/p\u003e","brand":"Ideal Lux","offers":[{"title":"Default Title","offer_id":45733339267339,"sku":"324890","price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/324890_WEB001_ZEUS_FRAME_TRIM_SQUARE_21W_WH_289a0c59-0fde-44e4-a75a-4c7413d05ed5.jpg?v=1729181229"},{"product_id":"zon-mounting-ring-for-round-recessed-downlight-22-6cm-white","title":"Zon Mounting Ring for Round Recessed Downlight 22.6cm - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zon is a white metal mounting ring designed to house round recessed downlights with a 22.6cm aperture. The ring measures 29.2cm outer diameter and 6.4cm height, providing the structural frame that sits within the ceiling cut-out and holds the downlight fitting flush to the ceiling surface. The white powder-coated metal finish matches standard white ceiling paint and conceals the rough edges of the ceiling aperture.\u003c\/p\u003e\n\u003cp\u003eUsed in new-build and retrofit recessed lighting installations, the Zon mounting ring fits between the ceiling joists and plasterboard, with the perforated metal flanges visible in the image providing fixing points for screws into the ceiling structure. Once secured, the ring creates a stable platform for the downlight to clip or screw into, preventing movement and ensuring the light sits level with the ceiling plane. The IP20 rating limits use to dry interior areas — living rooms, bedrooms, hallways and kitchens outside splashback zones.\u003c\/p\u003e\n\u003cp\u003eThe metal construction provides rigidity where plasterboard alone would sag or crack under the weight of a downlight fitting over time. The 29.2cm outer diameter spreads the load across a wider ceiling area than the 22.6cm aperture itself, reducing stress on the plasterboard edge. The white finish visible from below integrates with white ceilings without requiring additional trim rings or bezels in most residential installations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e6.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e29.2cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e22.6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat downlight sizes does this ring fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Zon is designed for round recessed downlights with a 22.6cm fitting diameter. Check the downlight manufacturer's specifications for the required mounting ring aperture before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling cut-out size is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 22.6cm aperture refers to the internal diameter where the downlight sits. The outer diameter of 29.2cm requires ceiling joists spaced to allow the ring to sit across the structure, typically 400mm or 600mm joist centres depending on the building.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the ring is not protected against moisture ingress and must be used only in dry interior areas. Bathrooms and wet rooms require IP44 or IP65 rated mounting hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the ring compatible with LED downlights?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the ring is a passive mounting component and works with any downlight technology — LED, halogen, or older lamp types — provided the downlight's physical dimensions match the 22.6cm aperture.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45800692318475,"sku":"DLA032-TRS24-W","price":36.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DLA032-TRS24-W_on_w_standard_bd97cf41-c4b8-4c4e-aff7-518a6ba5fb4b.jpg?v=1737120923"},{"product_id":"zon-round-recessed-downlight-mounting-ring-30-6cm-white","title":"Zon Round Recessed Downlight Mounting Ring 30.6cm - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zon is a 30.6cm diameter mounting ring designed to support round recessed downlights in plasterboard or suspended ceilings. Made from white-finished metal, the ring provides the structural framework needed to hold a downlight securely in the ceiling void while creating a clean aperture at ceiling level. The 37.2cm outer diameter accommodates the mounting clips, and the 6.4cm height allows the ring to sit in a standard ceiling cavity depth.\u003c\/p\u003e\n\u003cp\u003eUsed in residential living rooms, hallways, commercial offices and retail spaces, the mounting ring is installed during first-fix electrical work before the ceiling is closed. The four perforated metal tabs visible in the image are spring-clip mounting points that grip the top surface of the plasterboard once the ring is pushed up into the ceiling cut-out. The white finish matches standard white ceiling paint, making the ring invisible once the downlight trim is fitted over it.\u003c\/p\u003e\n\u003cp\u003eThe metal construction resists warping under the heat of halogen or high-wattage LED downlights, and the IP20 rating confirms it is suitable for dry indoor environments only. The ring is a passive component with no electrical function — it simply holds the downlight housing in place and defines the ceiling aperture. Compatible with most round recessed downlights that specify a 30.6cm mounting ring, including other products in the Maytoni Zon range.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e6.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e37.2cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e30.6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling thickness does this mounting ring suit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 6.4cm height accommodates standard UK plasterboard ceiling thicknesses of 12.5mm-15mm with typical ceiling void depths of 100mm or more. The spring clips grip the top surface of the plasterboard once the ring is pushed into the cut-out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size hole needs to be cut in the ceiling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe aperture diameter is 30.6cm. The outer diameter of 37.2cm includes the mounting tabs that sit above the plasterboard, so the visible ceiling cut-out will be 30.6cm once the downlight trim is fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with LED downlights?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The metal construction resists heat from both halogen and LED downlights. Check that the specific downlight you are pairing with this ring specifies a 30.6cm mounting ring in its installation instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It is rated IP20, so it is for dry rooms only.\u003c\/p\u003e\n","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45800692646155,"sku":"DLA032-TRS36-W","price":49.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DLA032-TRS36-W_on_w_standard_eb74a275-0b29-4a70-b80a-e1a984dead83.jpg?v=1737120922"},{"product_id":"zon-mounting-ring-for-round-recessed-downlight-40-6cm-white","title":"Zon Mounting Ring for Round Recessed Downlight 40.6cm - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zon is a 40.6cm diameter white metal mounting ring designed to provide the ceiling-mounted framework for round recessed downlights in the Maytoni Zon range. The ring sits flush with the ceiling surface once installed, creating a 47.2cm outer diameter aperture with the downlight fitting clipped into the central 40.6cm opening. The 6.4cm depth accommodates the mounting springs and allows the ring to sit securely in the ceiling void.\u003c\/p\u003e\n\u003cp\u003eDesigned for new-build installations or ceiling refurbishments where recessed downlights are being fitted, the ring is installed into the ceiling cut-out before the downlight itself is clipped in from below. The metal construction provides rigidity around the aperture edge, preventing sagging or distortion over time where plasterboard alone would flex. The white powder-coated finish matches standard ceiling paint and sits flush with the plaster surface once the downlight is fitted.\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating limits this ring to dry internal locations — living rooms, bedrooms, hallways and offices where moisture and dust ingress are not concerns. The 47.2cm outer diameter means the ceiling cut-out needs to be slightly larger than the visible 40.6cm downlight aperture to accommodate the mounting frame. The ring pairs specifically with Maytoni Zon recessed downlights; compatibility with other brands' fittings is not guaranteed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e6.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e47.2cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e40.6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size ceiling cut-out is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe outer diameter of the mounting ring is 47.2cm, so the ceiling cut-out needs to be slightly larger than this to allow the ring to drop into the void. The visible downlight aperture once fitted will be 40.6cm. Check the Maytoni installation guide for the exact cut-out diameter required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with other brands' recessed downlights?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Zon mounting ring is designed specifically for Maytoni Zon recessed downlights. Compatibility with other manufacturers' fittings is not guaranteed due to differences in clip-in mechanisms and aperture tolerances.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathrooms or kitchens?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is rated IP20, so it is for dry rooms only. It is not rated for areas where steam, condensation or direct water contact may occur. For wet-rated applications, look for IP44 or IP65-rated alternatives.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the ring come with the downlight fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The mounting ring is sold separately from the downlight fitting itself. You will need to purchase the compatible Maytoni Zon recessed downlight separately to complete the installation.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45800692941067,"sku":"DLA032-TRS45-W","price":66.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DLA032-TRS45-W_on_w_standard_a639de6e-1dd6-49ca-be7d-7fae8a3ee80f.jpg?v=1737120921"},{"product_id":"zon-60-6cm-round-recessed-downlight-mounting-ring-white","title":"Zon 60.6cm Round Recessed Downlight Mounting Ring - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Zon is a 60.6cm diameter mounting ring designed to support large round recessed downlights within ceiling voids. Constructed from white-finished metal, the ring provides a structural frame that bridges the gap between the ceiling cut-out and the downlight housing, distributing the weight of the fitting across the ceiling joists or plasterboard edge.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installation where large-diameter recessed downlights are specified, the Zon suits ceiling heights of 2.4m or above where a flush-mounted light source is needed without visible suspension. The 60.6cm aperture accommodates downlights in the 550-600mm diameter range, commonly used for high-output LED panels in lobbies, open-plan living areas, commercial offices and retail spaces. The ring sits between the ceiling surface and the downlight trim, concealing the cut edge and providing a clean finished appearance once the downlight is installed.\u003c\/p\u003e\n\u003cp\u003eThe white powder-coated metal finish matches standard white ceilings and downlight trims, maintaining a seamless ceiling plane. The 67.2cm outer diameter provides a mounting flange wide enough to span typical joist centres (400-600mm), and the 6.4cm height gives clearance for most LED driver units and wiring within the ceiling void. The IP20 rating confirms suitability for dry internal environments only — this is not a bathroom or outdoor-rated component.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e6.4cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e67.2cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e60.6cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat downlight sizes does this ring accommodate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 60.6cm aperture suits round recessed downlights with trim diameters between 550mm and 600mm. Check the downlight manufacturer's specifications to confirm the required cut-out diameter before ordering the mounting ring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ring itself adds 6.4cm of height within the void. The total clearance needed depends on the specific downlight housing and driver unit being installed — most large recessed LED panels require 80-120mm of ceiling void depth including the mounting ring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating confirms this mounting ring is only suitable for dry internal environments. For bathroom or outdoor installation, a higher IP-rated mounting system is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the ring fixed to the ceiling structure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 67.2cm outer diameter provides a mounting flange that sits on top of the ceiling surface or spans between ceiling joists. Fixings depend on the ceiling construction — plasterboard installations typically use toggle fixings or batten supports, while concrete or solid ceilings may require direct screws or anchors. Installation should be carried out by a qualified electrician.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45800693432587,"sku":"DLA032-TRS90-W","price":92.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_DLA032-TRS90-W_on_w_standard_3d564544-b2f6-4cb8-ae14-383eb1f1d48a.jpg?v=1737120920"},{"product_id":"powermaster-ip65-fire-rated-clip-on-bezel-chrome","title":"IP65 Fire Rated Clip On Bezel - Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is the trim ring that finishes a recessed downlight: the visible collar that sits against the ceiling and covers the cut edge of the hole. It clips on, so it is held in place by the fitting behind it rather than screwed or glued, which is what makes swapping one for another a two minute job. The face is polished chrome, mirror bright and plain, with a softly domed outer rim that steps down into a deep, rounded throat around the central aperture. It carries an IP65 rating.\u003c\/p\u003e\n\u003cp\u003eIP65 means dust tight and protected against water jets, and that is what earns this trim its place in wet rooms. It is suitable for use in zones 3, 2 and 1, but not zone 0, so it can go in a bathroom or shower room ceiling, including directly above a bath or a shower tray, but never inside the bath or the shower basin itself. Chrome is the safe match in most UK bathrooms because it picks up the taps, the shower valve and the towel rail without having to be matched exactly. It reads equally well in a kitchen, a utility room or a hallway where the rest of the ironmongery is bright metal.\u003c\/p\u003e\n\u003cp\u003eAperture and overall diameter are not stated by the manufacturer, so before ordering, check the bezel currently on your downlight and confirm the maker lists interchangeable clip on trims for that model. The bezel is the trim only: brightness, colour temperature, beam angle and whether the light can be dimmed are all decided by the downlight and the lamp behind it. One bezel per unit, minimum order one, so you can buy a single replacement or count out a ceiling's worth.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eClip on bezel for fire rated downlights\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65, suitable for zones 3, 2 and 1 only, not zone 0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003e1 bezel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum order\u003c\/td\u003e\n\u003ctd\u003e1, sold in multiples of 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWill this bezel fit my downlight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is made for fire rated downlights that take a clip on trim. The aperture and outer diameter are not stated, so measure the bezel already on your fitting and confirm the maker offers interchangeable trims for that model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I put it above a shower or a bath?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating covers zones 3, 2 and 1, though not zone 0, so it can sit in the ceiling over a shower tray or a bath provided the downlight behind it is rated and installed to the wiring regulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the bezel on its own make a downlight fire rated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Fire performance comes from the downlight body and its intumescent parts. This is the matching trim for that style of fitting, so the fire rated fitting still has to be the one behind it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a lamp or a driver included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, you receive the trim ring only. Light output, colour temperature, beam angle and any dimming all depend on the downlight and the lamp you fit behind the bezel, not on the bezel itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many bezels do I receive?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne bezel per unit, with a minimum order of one, so you can buy a single replacement for a damaged trim or order as many as you have downlights to match.\u003c\/p\u003e","brand":"PowerMaster","offers":[{"title":"Default Title","offer_id":46074296697099,"sku":"S15345","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/S15345_00.jpg?v=1790052831"},{"product_id":"powermaster-led-downlight-fire-rated-bezel-brushed-chrome-ip65","title":"IP65 Fire Rated Clip On Bezel - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\u003cp\u003eA clip on bezel is the ring you see once a downlight is set into the ceiling, and this one is finished in brushed chrome: a softly grained silver with a broad flat face and a chamfered inner edge that steps down to the round aperture. It is rated IP65, which means dust tight and protected against water jets from any direction, and the manufacturer describes it as fire rated. The face is plain and circular, with no fixings showing once it is in place.\u003c\/p\u003e\u003cp\u003eIP65 is the reason it can go where it does: zones 1, 2 and 3 of a bathroom, though not zone 0, which is the inside of the bath or the shower tray itself. That takes in the ceiling over a shower enclosure, the ceiling over a bath, and the rest of a family bathroom, en suite or cloakroom. Brushed chrome sits quietly alongside brushed nickel or satin chrome taps, shower valves and door handles, and a grained finish shows water spotting and fingerprints far less readily than a polished one in a room that steams up twice a day.\u003c\/p\u003e\u003cp\u003eChanging bezels is the cheapest way to alter the look of a run of downlights without touching the wiring, since a clip on trim fits to the front of the fitting rather than being wired into it. The manufacturer does not state a diameter or a cut-out size here, so measure the downlight you intend to fit it to and check the two match, as bezels are rarely interchangeable between makes. The manufacturer lists it as non dimmable; whether the light dims is settled by the lamp and the dimmer behind it rather than by the trim. It is sold singly, with a minimum order of one, so you can buy exactly as many as you have ceiling positions.\u003c\/p\u003e\u003ch5\u003eSpecification\u003c\/h5\u003e\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eClip on bezel for a recessed downlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFire rating\u003c\/td\u003e\n\u003ctd\u003eFire rated; no period in minutes stated by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003e1 bezel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum order\u003c\/td\u003e\n\u003ctd\u003e1, sold in multiples of 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\u003cp\u003e\u003cstrong\u003eCan I use this in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. The IP65 rating allows use in zones 1, 2 and 3, but not zone 0, which is the inside of the bath itself or the shower tray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it fit the downlights I already have?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe manufacturer does not state a diameter or a cut-out size, so measure the bezel currently on your downlight and compare before ordering, because sizes vary between makes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does fire rated mean on a bezel?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is described as fire rated, but no period in minutes is printed, so check the downlight's own paperwork for the tested rating of the complete fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the bezel affect whether the light can be dimmed?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is listed as non dimmable. Dimming is decided by the lamp and the dimmer switch wired behind the downlight, not by the trim ring at the front.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many bezels do I get?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne bezel per unit, with a minimum order of one, so you can order a single replacement or match the exact number of ceiling positions you have.\u003c\/p\u003e","brand":"PowerMaster","offers":[{"title":"Default Title","offer_id":46074297417995,"sku":"S15346","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/S15346_00.jpg?v=1789654318"},{"product_id":"bezel-for-valknight-downlights-antique-brass","title":"Bezel for Valknight Downlights - Antique Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis 80mm antique brass bezel clips onto Valknight 7W LED downlights, adding a warm metallic surround to the recessed fitting. The bezel replaces the standard chrome or white trim supplied with the downlight, allowing the finish to match other brass hardware, switches or door furniture in the room.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential installation in living rooms, bedrooms, hallways and kitchens where antique brass fittings are used throughout, the bezel suits traditional, classical and transitional interiors where polished chrome or white trim would feel too modern. The 4.5mm projection from the ceiling gives a low-profile finish that sits nearly flush with plaster, avoiding the prominent stepped edge of some older downlight bezels.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish has a deliberately aged, slightly tarnished appearance rather than the high polish of new brass, giving it a more muted tone that pairs comfortably with oak, walnut and dark-stained timber. The bezel clips into the downlight housing without tools, so changing from the supplied trim to this antique brass finish takes seconds once the downlight is already installed in the ceiling.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-VFRBEZAB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Valknight downlights is this bezel compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel fits all Valknight 7W LED downlights regardless of the finish supplied with the downlight (chrome, brushed chrome, white). It clips onto the housing and replaces the original trim.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the bezel require tools to fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The bezel clips into the downlight housing by hand. Once the downlight is installed in the ceiling, you can remove the existing trim and clip this antique brass bezel into place in seconds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between antique brass and polished brass?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAntique brass has a deliberately aged, slightly tarnished appearance with a muted, darker tone. Polished brass is bright, reflective and closer to the appearance of new brass. Antique brass suits traditional and classical interiors where a softer, less reflective finish is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this bezel be used with other downlight brands?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel is designed specifically for Valknight 7W LED downlights and may not fit other brands or models. Check the compatibility list or contact us if you're pairing it with a non-Valknight downlight.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391490195723,"sku":"VFRBEZAB","price":4.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/8274_c07a4bd9-ee2c-4bae-bc2e-798b18601f2d.jpg?v=1747060861"},{"product_id":"knightsbridge-80mm-fixed-downlight-bezel-white","title":"80mm Fixed Downlight Bezel - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 80mm fixed downlight bezel is a white die-cast aluminium trim ring that sits flush around fixed downlight fittings to conceal the ceiling aperture and provide a clean finished edge. The bezel measures 80mm in diameter with a 4mm projection from the ceiling surface once installed.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with Knightsbridge and other compatible fixed downlight ranges, the bezel clips or screws onto the downlight housing after the fitting is installed in the ceiling. This covers any minor over-cutting of the ceiling aperture and gives a defined perimeter to the light fitting in line with the ceiling plane. The white powder-coated finish blends with white and light-toned ceilings commonly found in residential, office and retail installations.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium construction provides rigidity without adding significant weight to the downlight assembly, and the finish is resistant to minor knocks during cleaning or maintenance. The shallow 4mm projection minimises the visual bulk of the bezel when viewed from below, keeping the ceiling plane as flat as possible while still providing the functional trim.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-VFRICBEZW.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights is this bezel compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 80mm bezel fits Knightsbridge fixed downlight ranges and other manufacturers' fixed downlights with an 80mm bezel mounting diameter. Check the downlight specification or measure the existing bezel diameter before ordering to confirm compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the bezel attached to the downlight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAttachment methods vary by downlight model. Most Knightsbridge fixed downlights use either a screw-fix or clip-on system where the bezel fixes to the outer edge of the downlight housing after the housing is installed in the ceiling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be painted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The powder-coated aluminium surface can be painted with standard interior ceiling paint if you need to match a specific ceiling colour. Light sanding before painting improves adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling aperture size does this bezel cover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 80mm outer diameter covers ceiling apertures cut for standard fixed downlights, typically 65-75mm depending on the specific downlight model. The bezel conceals minor over-cutting and provides a clean finished edge around the fitting.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391536726283,"sku":"VFRICBEZW","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/111462_ae014e43-5ebf-45fa-9c4a-bd92f9e0ab43.jpg?v=1747061438"},{"product_id":"chrome-bezel-for-knightsbridge-ip65-fire-rated-led-downlights-85mm","title":"Chrome Bezel for IP65 Fire-Rated LED Downlights - 85mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis chrome bezel fits Knightsbridge IP65 fire-rated LED downlights, providing an 85mm diameter decorative trim ring that sits flush with the ceiling surface. The bezel is pressed from steel and finished in polished chrome, adding a reflective metallic accent to the white thermoplastic body of the compatible downlights.\u003c\/p\u003e\n\u003cp\u003eDesigned for exterior soffits, covered porches, bathrooms and other IP65-rated installations, the bezel maintains the downlight's ingress protection rating when correctly fitted. The 4mm projection from the ceiling gives a subtle recessed appearance without creating a deep shadow line. The bezel clips onto the downlight body without tools, allowing it to be removed for redecorating or replaced if the finish becomes damaged.\u003c\/p\u003e\n\u003cp\u003eThe chrome finish pairs with contemporary and traditional exterior schemes where metallic accents are preferred over plain white fittings. The bezel is compatible with Knightsbridge's 5W and 6W fire-rated dimmable LED downlights in both 3000K and 4000K colour temperatures, giving flexibility to match the trim finish to door furniture, guttering or window frames while keeping the same downlight body across an installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-RW6C.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights is this bezel compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel fits Knightsbridge fire-rated LED dimmable downlights in 5W and 6W versions, available in 3000K warm white and 4000K cool white. The downlight body must be the white thermoplastic IP65-rated version — this bezel does not fit non-fire-rated or non-IP65 downlight models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes fitting the bezel affect the IP65 rating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. When correctly clipped onto a compatible Knightsbridge IP65 downlight, the bezel maintains the full IP65 ingress protection rating required for exterior and bathroom installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be removed for painting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The bezel clips onto the downlight body without screws or permanent fixings, allowing it to be removed before painting a ceiling and re-clipped afterwards without affecting the downlight's performance or IP rating.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391564972299,"sku":"RW6C","price":2.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/158732_4e1ecb29-0aa2-4ca0-973d-2bf8303a5166.jpg?v=1747061796"},{"product_id":"matt-white-bezel-for-ip65-fire-rated-led-downlights-85mm","title":"Matt White Bezel for IP65 Fire-Rated LED Downlights - 85mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge RW6MW is an 85mm matt white bezel designed to fit the manufacturer's IP65 fire-rated LED downlights. Made from pressed steel with a powder-coated matt white finish, the bezel provides the visible trim ring that sits flush against the ceiling surface once the downlight is installed.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor soffits, covered porches, bathroom zones and other IP65-rated ceiling applications, the bezel clips onto the downlight housing during installation to create a watertight seal between the fitting and the ceiling. The 4mm projection from the ceiling surface gives a shallow, recessed appearance that minimises visual clutter in low-ceiling spaces. The matt white finish pairs with white or light-toned ceilings and woodwork without creating a strong contrast.\u003c\/p\u003e\n\u003cp\u003eThe bezel fits three specific Knightsbridge fire-rated downlight models: the 6W 3000K, the 5W 3000K, and the 6W 4000K versions (all sold separately). Each of those downlights carries a 90-minute fire rating, meaning the bezel is designed to maintain integrity during a fire test when fitted to the correct downlight.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-RW6MW.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe RW6MW bezel fits three Knightsbridge fire-rated IP65 downlight models: the 6W 3000K (warm white), the 5W 3000K, and the 6W 4000K (cool white). It will not fit other manufacturers' downlights or non-fire-rated models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this bezel be used indoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating makes it suitable for both outdoor soffits and indoor damp environments like bathrooms (zones 1 and 2) and kitchens. The matt white finish works in any interior setting where a recessed downlight is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the bezel maintain the fire rating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. When fitted to the compatible Knightsbridge fire-rated downlight, the bezel maintains the 90-minute fire rating of the complete assembly. The bezel must be fitted correctly during installation to preserve this rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bezel sold with the downlight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The bezel is sold separately from the downlight. This allows installers to choose different bezel finishes (matt white, brushed chrome, polished chrome, etc.) to match the ceiling or interior scheme.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391565201675,"sku":"RW6MW","price":2.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/158752_4fdf4e21-372c-47e0-bb43-99d96186d042.jpg?v=1747061803"},{"product_id":"knightsbridge-chrome-bezel-for-ip65-fire-rated-led-downlights-85mm","title":"Chrome Flat Bezel for IP65 Fire-Rated LED Downlights - 85mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge chrome bezel is an 85mm diameter pressed steel trim ring designed to fit over IP65-rated fire-rated LED downlights. The bezel projects just 2.6mm from the ceiling surface and clips directly onto compatible Knightsbridge downlight housings without tools, covering the edge gap between the downlight body and the ceiling cutout.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor and wet-environment installations where the downlight body carries an IP65 rating, the chrome bezel provides a finished edge detail around soffit-mounted downlights, porch lights and bathroom ceiling lights. The bezel itself does not carry an IP rating — the IP65 protection comes from the downlight housing underneath. The chrome finish adds a high-gloss metallic accent that pairs with polished chrome door furniture, tapware and contemporary exterior fittings.\u003c\/p\u003e\n\u003cp\u003eThe bezel fits the following Knightsbridge fire-rated LED downlights: 6W 3000K (warm white), 5W 3000K, and 6W 4000K (cool white) models in white housings. The pressed steel construction is lighter than cast metal bezels and the tool-free clip fitting allows the bezel to be removed for redecorating or lamp maintenance without affecting the downlight's fire rating or IP seal.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-RW6FC.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel is compatible with Knightsbridge fire-rated LED downlights in the RW series: 6W 3000K, 5W 3000K, and 6W 4000K models with white housings. Check the Specification tab or product datasheets to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the bezel carry an IP65 rating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP65 rating is provided by the downlight housing underneath. The bezel is a trim ring that covers the ceiling cutout edge — it does not contribute to the weatherproofing. Only use this bezel with downlights already rated IP65 for outdoor or wet-room installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bezel removable once fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The bezel clips onto the downlight housing without tools and can be removed for ceiling redecorating or lamp maintenance. Removing the bezel does not affect the downlight's fire rating or IP seal provided the downlight body is not disturbed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces these downlight bezels in several finishes including white, brushed chrome and antique brass. Use the search function or filters to find other bezel options in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391565660427,"sku":"RW6FC","price":2.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/165658_44dd9d8b-0e84-4a54-b4af-d0df0a258dca.jpg?v=1747061812"},{"product_id":"magnetic-bezel-for-fixed-firenova-downlight-matt-black","title":"Magnetic Bezel for Fixed FireNova Downlight - Matt Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis magnetic bezel provides a matt black 88mm diameter frame for Knightsbridge FireNova fixed fire-rated downlights. The bezel attaches magnetically to the downlight trim ring, giving a defined edge around the lamp aperture without requiring tools or fixings during installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial settings where a crisp, high-contrast finish is needed on ceilings, the matt black frame creates a sharp visual boundary that works well against white, grey and off-white ceiling surfaces. The 3mm projection from the ceiling plane is shallow enough to avoid creating shadows or catching dust, while still providing a visible accent. The magnetic attachment allows the bezel to be removed for redecorating or swapped for a different finish in the same FireNova bezel range without disturbing the downlight fitting itself.\u003c\/p\u003e\n\u003cp\u003eThe bezel is constructed from polycarbonate, which maintains its finish under the heat generated by LED downlights and resists warping over time. The matt black surface finish minimises reflections and glare from angled daylight, keeping the frame visually recessive during the day while framing the light output cleanly at night. Each bezel is compatible only with the fixed FireNova fire-rated downlight model — it will not fit tiltable or adjustable versions of the FireNova range.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e88mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-FRNFBEZMB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlight does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bezel is designed specifically for the Knightsbridge FireNova fixed fire-rated downlight. It will not fit tiltable or adjustable versions of the FireNova, nor will it fit other downlight ranges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the bezel attached?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel attaches magnetically to the downlight trim ring. No tools or fixings are needed — the bezel simply clips into place and can be removed by hand if you need to swap finishes or redecorate around the fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces the FireNova bezel range in several finishes including white, brushed chrome, polished chrome and matt black. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It has no stated IP rating, so it is for dry rooms only. The bezel itself does not carry an IP rating.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391634997515,"sku":"FRNFBEZMB","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1936662_04b1c6f0-b2c0-4a0a-84db-beef8d82d622.jpg?v=1747062921"},{"product_id":"magnetic-bezel-for-fixed-firenova-downlight-brushed-chrome","title":"Magnetic Bezel for Fixed FireNova Downlight - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis magnetic bezel fits Knightsbridge FireNova fixed fire-rated downlights, providing a brushed chrome trim ring that conceals the edge of the ceiling cut-out and frames the downlight aperture. The bezel is 88mm in diameter with a 3mm projection from the ceiling plane, and attaches to the FireNova housing via integral magnets, requiring no tools or clips for installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installations where a polished metallic finish is needed around recessed downlights, the bezel suits kitchens, hallways and office spaces. The magnetic attachment allows the bezel to be removed for redecorating or lamp replacement without disturbing the downlight housing itself. The polycarbonate construction is lighter than metal bezels and resists discolouration from heat in typical LED downlight operation.\u003c\/p\u003e\n\u003cp\u003eThe brushed chrome finish shows directional grain lines that soften reflections compared to polished chrome, making it less visually dominant in ceilings with multiple downlights. The finish pairs with brushed chrome switches, sockets and cabinet hardware. Knightsbridge produces this bezel design in a range of finishes to suit different interior schemes, all with the same 88mm diameter and magnetic fit compatible with the fixed FireNova housing.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e88mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-FRNFBEZBC.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights is this bezel compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bezel fits Knightsbridge FireNova fixed fire-rated downlights. It attaches magnetically to the downlight housing and will not fit other brands or non-FireNova Knightsbridge models. Check the downlight model number before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the bezel fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel contains integral magnets that attach directly to the metal rim of the FireNova housing. No tools, clips or screws are required. To remove the bezel for lamp replacement or redecorating, pull gently away from the ceiling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces the FireNova magnetic bezel in brushed chrome, polished chrome, white, satin nickel, antique brass and matt black. Use the search function or filters to find other finishes in stock at Niori.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the polycarbonate construction affect heat resistance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePolycarbonate is rated for the heat output of typical LED downlights used in FireNova housings. LED downlights generate significantly less heat than halogen equivalents, so discolouration from heat is not an issue in normal residential or commercial installation.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391635325195,"sku":"FRNFBEZBC","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1936660_1e2cfaf9-8c30-4777-a050-a3d7ada45b2b.jpg?v=1747062925"},{"product_id":"magnetic-bezel-for-fixed-firenova-downlight-polished-chrome","title":"Magnetic Bezel for Fixed FireNova Downlight - Polished Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge magnetic bezel is an 88mm diameter polished chrome trim ring designed specifically for fixed FireNova fire-rated downlights. The bezel sits flush against the ceiling surface with a 3mm projection and uses magnetic attachment to clip directly onto the downlight housing without tools or screws.\u003c\/p\u003e\n\u003cp\u003eDesigned to provide a finished appearance where the downlight cuts through painted plasterboard or plastered ceilings, the bezel conceals the rough cut edge and any minor gaps between the downlight and the ceiling surface. The polished chrome finish gives a mirror-like reflective surface that pairs with modern and contemporary interiors where chrome taps, door furniture and light switches are already present.\u003c\/p\u003e\n\u003cp\u003eThe bezel is moulded from polycarbonate with a vacuum-metallised chrome finish, making it lighter and easier to handle than solid metal bezels while maintaining the same visual appearance. The magnetic connection allows the bezel to be removed for redecorating or maintenance without disturbing the wiring or the downlight housing itself. The 88mm diameter covers the standard cut-out for FireNova fixed downlights.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e88mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-FRNFBEZPC.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bezel is designed for Knightsbridge FireNova fixed fire-rated downlights. It uses magnetic attachment and fits the standard 88mm cut-out diameter. Check your downlight model is a fixed (non-tiltable) FireNova before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the bezel fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel uses magnetic attachment and clips directly onto the downlight housing once the downlight is installed in the ceiling. No tools are needed. The magnet holds the bezel in place and allows it to be removed for redecorating or maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be painted over?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe polished chrome finish is not designed to be painted. If you need a paintable bezel, Knightsbridge offers white versions in the same range that can be emulsion-painted to match the ceiling colour.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces FireNova bezels in a range of finishes including white, brushed chrome, satin nickel, antique brass and matt black. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391635685643,"sku":"FRNFBEZPC","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1936666_4f640aa2-9c78-46c4-9604-bafdc59a7c3b.jpg?v=1747062930"},{"product_id":"magnetic-bezel-for-fixed-firenova-downlight-polished-brass","title":"Magnetic Bezel for Fixed FireNova Downlight - Polished Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis magnetic bezel is a 88mm polished brass trim designed to clip onto Knightsbridge FireNova fixed fire-rated downlights. The bezel is moulded from polycarbonate with a polished brass finish and sits 3mm proud of the ceiling surface, forming a visible trim ring around the downlight aperture.\u003c\/p\u003e\n\u003cp\u003eThe bezel attaches via magnetic mount, meaning it clips onto the downlight housing without tools, screws or clips. This allows the bezel to be removed and refitted for redecorating or to swap finishes without disturbing the wiring or fire-rated housing behind. The polished brass finish provides a warm metallic accent that pairs with traditional brass switches, door furniture and tap fittings in kitchens and period-style interiors.\u003c\/p\u003e\n\u003cp\u003eThe 88mm outer diameter matches the standard FireNova fixed downlight aperture. The polycarbonate construction is lighter than metal bezels and does not conduct heat, making it safe to touch shortly after the downlight has been switched off. The polished brass coating gives a mirror-like reflective finish when new, developing a natural patina over time unless periodically cleaned.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e88mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-FRNFBEZPB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with all FireNova downlights?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bezel is designed for the Knightsbridge FireNova fixed fire-rated downlight range. It is not compatible with tiltable or adjustable FireNova models, which use a different bezel design. Check the downlight model before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the bezel fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel attaches via magnetic mount and simply clips onto the metal housing of the installed downlight. No tools, screws or spring clips are needed. To remove, gently pull the bezel away from the ceiling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the polished brass finish be cleaned?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Wipe with a soft, dry microfibre cloth to remove dust and fingerprints. For a deeper clean, use a damp cloth with a small amount of brass cleaner or distilled water, then dry immediately. Polished brass develops a natural patina over time unless regularly polished.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces FireNova bezels in a range of finishes including white, chrome, brushed chrome, matt black and antique brass. Search for 'FireNova bezel' at Niori to see other options in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391635882251,"sku":"FRNFBEZPB","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1936664_8f87118c-e52f-4626-b983-f4206e8f63d3.jpg?v=1747062934"},{"product_id":"magnetic-bezel-for-fixed-firenova-downlight-antique-brass","title":"Magnetic Bezel for Fixed FireNova Downlight - Antique Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis magnetic bezel fits Knightsbridge FireNova fixed fire-rated downlights, providing an antique brass trim ring that changes the visible finish of the downlight without rewiring or removing the fitting from the ceiling. The bezel attaches magnetically to the FireNova's metal housing, allowing it to be swapped or removed without tools.\u003c\/p\u003e\n\u003cp\u003eDesigned for refurbishments, rental properties and installations where finish flexibility is needed, the bezel lets a single downlight model work across different interior schemes by changing only the visible trim. The 88mm outer diameter covers the standard FireNova cutout with a 3mm projection from the ceiling surface. The polycarbonate construction is lighter than metal bezels and handles the heat from LED downlights without warping.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish has a darker, aged tone compared to polished or brushed brass, with subtle tonal variation across the surface that suits traditional and period interiors. The finish pairs well with antique brass door furniture, cabinet handles and tap fittings. The magnetic attachment means the bezel can be removed for redecorating or replaced if damaged, without disturbing the downlight's electrical connection.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\" style=\"width: 100%; height: 97px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 42.0986%; height: 19.6px;\"\u003eDiameter\u003c\/td\u003e\n\u003ctd style=\"width: 55.5405%; height: 19.6px;\"\u003e88mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18.6px;\"\u003e\n\u003ctd style=\"width: 42.0986%; height: 18.6px;\"\u003eProjection\u003c\/td\u003e\n\u003ctd style=\"width: 55.5405%; height: 18.6px;\"\u003e3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 42.0986%; height: 19.6px;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"width: 55.5405%; height: 19.6px;\"\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 42.0986%; height: 19.6px;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"width: 55.5405%; height: 19.6px;\"\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 42.0986%; height: 19.6px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"width: 55.5405%; height: 19.6px;\"\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-FRNFBEZAB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with all FireNova downlights?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bezel is designed for the Knightsbridge FireNova fixed downlight models. It will not fit the tiltable FireNova models or other downlight brands due to the magnetic attachment system being specific to FireNova housings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the bezel attached?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel attaches magnetically to the metal housing of the FireNova downlight. No tools, screws or clips are needed. The bezel simply snaps into place over the downlight rim and can be removed by gently pulling it away from the ceiling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be painted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate material can technically accept paint, but the antique brass finish is intended as a final finish. Painting over it would obscure the brass tone and may affect the magnetic grip if paint builds up on the attachment points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces FireNova magnetic bezels in a range of finishes including white, chrome, brushed chrome, polished brass and black. Search for 'FireNova bezel' at Niori to see the full range in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391636046091,"sku":"FRNFBEZAB","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1936658_afea2304-ded8-482c-bcef-2db264b34177.jpg?v=1747062938"},{"product_id":"renu-downlight-bezel-88mm-matt-black","title":"Renu Downlight Bezel 88mm - Matt Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis 88mm matt black bezel clips onto Knightsbridge Renu fixed and tilt downlights, replacing the standard white bezel supplied with the fitting. The bezel is made from impact-resistant ABS and projects 4.5mm from the ceiling surface once fitted, creating a defined edge around the downlight aperture.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installations where a darker finish is needed to match other fixtures or to create visual contrast against white or light-coloured ceilings, the matt black bezel suits contemporary, industrial and high-contrast interiors. The bezel simply clips onto the outer rim of the Renu downlight body after the fitting is installed into the ceiling cut-out, requiring no additional fixings or tools.\u003c\/p\u003e\n\u003cp\u003eThe matt finish on the black ABS minimises reflections under direct light and hides fingerprints better than gloss finishes. The 88mm diameter matches the standard aperture size for both the Renu Fixed 6W and Renu Tilt 6W LED downlights, making it a direct swap for the factory-fitted white bezel. The ABS construction is lighter than metal bezels and resistant to cracking if the bezel is removed for redecorating.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e88mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-RE6BZMB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Renu downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel fits both the Renu Fixed 6W and Renu Tilt 6W LED downlights. It replaces the white bezel that comes fitted as standard on those models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be fitted after the downlight is installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The bezel clips onto the outer rim of the Renu downlight body, so it can be swapped without removing the fitting from the ceiling. No tools are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the bezel affect the light output or beam angle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The bezel sits on the outer edge of the downlight aperture and does not project into the light path, so it has no effect on light output, beam angle or distribution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other bezel finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces Renu bezels in white (standard), matt black, brushed chrome and polished chrome. Use the search function at Niori to find other finishes currently in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391680282891,"sku":"RE6BZMB","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1927288_90caf001-1fbf-479b-aa99-4e953f0d6f6e.jpg?v=1747063411"},{"product_id":"renu-downlight-bezel-88mm-white-abs","title":"Renu Downlight Bezel 88mm - White ABS","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Renu bezel is an 88mm diameter white ABS trim ring designed to fit both Renu fixed and Renu tilt LED downlights. The bezel sits flush with the ceiling surface, projecting just 4.5mm to conceal the downlight housing cut-out edge and create a finished border around the light aperture.\u003c\/p\u003e\n\u003cp\u003eDesigned for installations where downlights are fitted into white ceilings or ceilings that will be painted white after installation, the bezel provides a neutral surround that blends into the ceiling plane rather than acting as a visible accent. The white ABS construction is lightweight and resistant to discolouration under normal indoor conditions, making it suitable for residential, commercial and hospitality projects.\u003c\/p\u003e\n\u003cp\u003eThe bezel clips onto the outer edge of the Renu downlight housing after the housing is wired and fixed into the ceiling cut-out, so it can be added or removed without re-wiring the fitting. This allows decorators to remove the bezel during ceiling painting and re-fit it afterwards without needing an electrician on site. The 88mm outer diameter covers the standard 65-70mm ceiling cut-out used for Renu downlights with a consistent margin around the aperture.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e88mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-RE6BZW.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Renu downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel fits all Knightsbridge Renu 6W fixed and tilt LED downlights. It clips onto the outer edge of the downlight housing after the fitting is installed into the ceiling cut-out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be removed for decorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The bezel clips on and off without tools, so it can be removed before ceiling painting and re-fitted afterwards without needing to disconnect the downlight wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling cut-out size does it cover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 88mm outer diameter covers the standard 65-70mm ceiling cut-out required for Renu downlights, leaving a consistent visible margin around the light aperture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre other finishes available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces Renu bezels in multiple finishes including white, chrome and brushed chrome. Use the search function to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391680938251,"sku":"RE6BZW","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1996748_6c777946-23ac-467a-aa93-f2a7b12e9d18.jpg?v=1747063415"},{"product_id":"renu-downlight-bezel-88mm-polished-chrome","title":"Renu Downlight Bezel 88mm - Polished Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis polished chrome bezel fits the Knightsbridge Renu range of fixed and tilt LED downlights, providing an 88mm diameter trim ring that sits flush with the ceiling surface. The bezel is constructed from ABS plastic with a polished chrome finish that creates a mirrored, reflective edge around the downlight aperture.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation over Renu downlight housings, the bezel clips onto the housing and projects just 4.5mm from the ceiling plane once fitted. This shallow profile suits both plasterboard and suspended ceilings where minimal projection is preferred. The polished chrome finish pairs with modern and contemporary interiors that use chrome taps, handles, light switches and other metallic accents.\u003c\/p\u003e\n\u003cp\u003eThe ABS construction keeps the bezel lightweight and resistant to corrosion in typical domestic humidity, making it suitable for living rooms, bedrooms, kitchens and hallways. The reflective chrome surface amplifies downlight output slightly by bouncing light back into the room rather than absorbing it into a matt trim.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e88mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-RE6BZPC.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Renu downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bezel is compatible with both the Renu Fixed and Renu Tilt LED downlights from Knightsbridge. It clips onto the downlight housing after the housing has been recessed into the ceiling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the bezel fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel clips onto the outer rim of the installed Renu downlight housing. No tools or screws are required — it simply pushes into place and is held by friction clips on the housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces Renu bezels in several finishes including white, brushed chrome, satin nickel and matt black. Use the search or filter functions at Niori to find other variants in stock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be removed for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The bezel can be pulled free from the downlight housing for ceiling painting or redecoration, then clipped back into place once the work is complete.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391681134859,"sku":"RE6BZPC","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1927282_5e61a890-a522-4276-a9ef-6c4e4e48c287.jpg?v=1747063419"},{"product_id":"renu-downlight-bezel-88mm-brushed-chrome","title":"Renu Downlight Bezel 88mm - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Renu bezel is an 88mm diameter trim ring in brushed chrome, designed to fit Renu Fixed and Renu Tilt 6W fire-rated LED downlights. The bezel clips onto the downlight housing once installed, providing a finished edge between the fitting and the ceiling cut-out. The 4.5mm projection from the ceiling plane gives a subtle raised lip that defines the fitting without dominating the ceiling line.\u003c\/p\u003e\n\u003cp\u003eSold as a replacement or alternative trim option for existing Renu downlight installations, the bezel allows homeowners and installers to change the finish of a downlight without replacing the entire fitting. The brushed chrome finish provides a soft metallic accent that pairs with chrome taps, door handles and other fixtures in kitchens and hallways. The ABS construction is lightweight and resists tarnishing better than metal bezels.\u003c\/p\u003e\n\u003cp\u003eThe bezel is compatible with both the Renu Fixed downlight (RE6LED) and the Renu Tilt downlight (RE6TLED), both of which are 6W fire-rated fittings with selectable colour temperature. The 88mm diameter matches the standard UK ceiling cut-out for these fittings, so no modification to the ceiling aperture is needed when swapping bezels. The finish is a directional brushed pattern radiating from the centre, giving a textured surface that diffuses reflections.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e88mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-RE6BZBC.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Renu downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel fits both the Renu Fixed (RE6LED) and Renu Tilt (RE6TLED) 6W fire-rated LED downlights. It clips onto the downlight housing after the fitting is installed in the ceiling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I replace an existing bezel without removing the downlight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The bezel is a separate trim piece that clips onto the downlight housing, so it can be swapped without disturbing the wiring or removing the fitting from the ceiling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the brushed chrome finish durable in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It has no stated IP rating, so it is for dry rooms only. The bezel is made from ABS plastic with a brushed chrome finish, which resists tarnishing and corrosion better than metal bezels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available for Renu downlights?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces Renu bezels in multiple finishes including white, black, polished chrome, satin nickel and brass. Use the search function at Niori to find other colour options in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391681364235,"sku":"RE6BZBC","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1927262_22626a9b-525a-48f2-84ef-caf2202dc075.jpg?v=1747063424"},{"product_id":"brass-bezel-for-renu-fixed-and-tilt-downlight-88mm","title":"Brass Bezel for Renu Fixed and Tilt Downlight - 88mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis brass-finish bezel fits Knightsbridge Renu fixed and tilt downlights, replacing the standard white or chrome trim with a warm metallic surround. The bezel is moulded from ABS polymer with a brass-effect finish, measuring 88mm diameter with a 4.5mm projection from the ceiling plane once clipped onto the downlight body.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and hospitality installations where a warm finish is needed to match existing brassware, period features, or classical interior schemes. The bezel clips directly onto Renu downlight housings without additional fixings or adhesive, allowing the finish to be changed during redecoration or when updating a room's metalwork palette. Compatible with both the fixed and tilt variants of the Renu LED downlight range.\u003c\/p\u003e\n\u003cp\u003eThe ABS construction keeps the bezel lightweight and cool to the touch even after extended operation of the downlight. The brass finish pairs comfortably with traditional brass door furniture, cabinet handles and light switch plates, providing a cohesive metalwork scheme across a room. The 88mm outer diameter sits flush with standard Renu downlight apertures and requires no trimming or adjustment on fitting.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e88mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-RE6BZB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Renu downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel is compatible with both Renu Fixed and Renu Tilt LED downlights from Knightsbridge. It clips directly onto the downlight housing, replacing the standard white or chrome trim supplied with those fittings.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs it real brass or a brass finish?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is an ABS polymer bezel with a brass-effect finish. It provides the appearance of brass without the weight, cost or tarnishing issues associated with solid brass trim rings.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan the bezel be fitted after the downlight is installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The bezel clips onto the downlight body, so it can be added or swapped during redecoration without removing or re-wiring the downlight itself. The existing bezel unclips and the brass bezel clips into place.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available for Renu downlights?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces Renu bezels in white, chrome, satin nickel, black and brass finishes. Use the site search or filter by 'Downlight Bezels' to find other variants in stock at Niori.\u003c\/p\u003e\n","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391681822987,"sku":"RE6BZB","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1996724_260f6caa-3b01-4c2f-8741-660bdf112355.jpg?v=1747063428"},{"product_id":"cyroled-fixed-and-tilt-bezel-white","title":"CyroLED Fixed and Tilt Bezel - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge CyroLED bezel is an 86mm diameter ABS trim ring designed to fit CyroLED fixed and tilt downlight fittings. The white finish matches standard white emulsion and gives a clean edge where the downlight meets the ceiling. At 4mm depth, the bezel sits nearly flush once the downlight is recessed, minimising projection into the room.\u003c\/p\u003e\n\u003cp\u003eThe bezel works with both fixed and tilt versions of the CyroLED downlight range, fitting over the lamp housing after the downlight is installed in the ceiling void. It conceals the cut-out edge and any gap between the fitting and plasterboard, giving a finished appearance in kitchens, hallways, retail spaces and offices where recessed lighting is used.\u003c\/p\u003e\n\u003cp\u003eABS construction keeps the bezel lightweight and resistant to cracking during fitting. The matt white surface does not yellow under heat from LED lamps and can be wiped clean with a damp cloth. Multiple bezels can be fitted across a ceiling grid to maintain visual consistency when using multiple downlights in the same space.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-CYRBZW.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich CyroLED downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel is designed for Knightsbridge CyroLED fixed and tilt downlight fittings. Check the product specification sheet or contact us to confirm compatibility with your specific CyroLED model before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be painted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eABS can be painted with suitable plastic primers and emulsion, though the factory white finish is designed to match standard white ceilings without painting. If you do paint the bezel, ensure the downlight is removed or masked to avoid paint on the lamp housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the bezel affect the light output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The bezel sits around the outside edge of the downlight and does not obstruct the lamp aperture or reflector, so it has no effect on lumen output or beam angle.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":52475342979339,"sku":"CYRBZW","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/2124622_bdcfe3e2-80f5-4b52-8fca-e0371d0db4e6.jpg?v=1760643104"},{"product_id":"cyroled-fixed-and-tilt-bezel-matt-black","title":"CyroLED Fixed and Tilt Bezel - Matt Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe CyroLED bezel is an 86mm matt black ABS trim ring designed to fit Knightsbridge's CyroLED fixed and tilt downlight range. The bezel clips onto the downlight housing once the lamp is recessed into the ceiling cut-out, covering the edge of the aperture and providing a 4mm low-profile finished surface that sits nearly flush with the ceiling plane.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, commercial and hospitality installations where downlights are specified with a recessed or semi-recessed fitting, the bezel hides the cut edge of plasterboard or ceiling tile and gives a consistent finished appearance across multiple downlight positions. The matt black finish suits contemporary, industrial and monochrome interiors, and the dark tone reduces visual glare around the light source by absorbing rather than reflecting ambient light from the ceiling.\u003c\/p\u003e\n\u003cp\u003eThe ABS construction is lightweight, impact-resistant and dimensionally stable across typical indoor temperature ranges. The 86mm outer diameter is a standard size for UK downlight bezels, meaning the CyroLED system can be paired with the same ceiling aperture used for many other recessed fittings. The bezel works with both the fixed and tilt variants of the CyroLED downlight, with the tilt version allowing the lamp head inside to rotate within the bezel aperture for directional lighting.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-CYRBZMB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich CyroLED downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel is compatible with both the fixed and tilt variants of the Knightsbridge CyroLED downlight range. It clips onto the downlight housing after the lamp is installed in the ceiling aperture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling aperture size is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 86mm bezel diameter is a standard UK downlight size. The exact cut-out diameter depends on the specific CyroLED downlight model being used — refer to the downlight's installation guide for the correct aperture size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be removed after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The bezel clips onto the downlight housing and can be removed for redecorating or lamp replacement without removing the entire downlight from the ceiling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces the CyroLED bezel in a range of finishes including white, polished chrome and brushed chrome. Use the search function at Niori to find other variants in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":52475343044875,"sku":"CYRBZMB","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/2124628_45e7fd1d-35ef-414e-bb1d-b3b9f39bbb82.jpg?v=1760643105"},{"product_id":"cyroled-fixed-and-tilt-bezel-polished-chrome","title":"CyroLED Fixed and Tilt Bezel - Polished Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe CyroLED bezel is an 86mm diameter polished chrome trim ring designed to fit Knightsbridge CyroLED fixed and tilt downlights. Moulded from ABS and finished in reflective polished chrome, the bezel provides a visible ceiling surround for recessed downlight installations, covering the cut-out edge and giving a defined edge to the light fitting.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial downlight installations where a chrome finish is specified to match other ceiling hardware, the bezel clips onto compatible CyroLED downlight bodies and sits flush with the ceiling plane. The 4mm depth projects minimally below ceiling level once fitted. The polished chrome finish provides a mirror-like reflective surface that pairs with contemporary chrome taps, door furniture and other metallic fixtures in kitchens, hallways and living spaces.\u003c\/p\u003e\n\u003cp\u003eThe ABS construction keeps the bezel lightweight while providing resistance to typical ceiling-level temperatures from halogen or LED downlights. The polished finish is applied to the visible face of the bezel, giving a consistent metallic sheen across the 86mm diameter. The bezel is compatible with both fixed and tilt versions of the CyroLED downlight range, allowing the trim finish to remain consistent even where individual fittings require different tilt angles.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-CYRBZPC.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat downlights is this bezel compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel is designed for Knightsbridge CyroLED fixed and tilt downlights. It clips onto the downlight body and is compatible with both fixed and tilt versions of the CyroLED range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling cut-out size does it cover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 86mm diameter bezel covers standard downlight cut-outs for CyroLED fittings. Check the specific CyroLED downlight model for the exact cut-out diameter required before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be painted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe polished chrome finish is factory-applied and is not designed to be painted over. Painting would cover the reflective chrome surface and change the appearance of the bezel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces CyroLED bezels in a range of finishes including white, brushed chrome, satin nickel and brass. Use the search function or filters to find other bezel finishes in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":52475343110411,"sku":"CYRBZPC","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/2124634_aa1a0dc2-bdbd-4621-a4d0-ee1213d58c27.jpg?v=1760643108"},{"product_id":"cyroled-fixed-tilt-bezel-brushed-chrome","title":"CyroLED Fixed \u0026 Tilt Bezel - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe CyroLED Fixed \u0026amp; Tilt Bezel is an 86mm diameter ABS trim ring in brushed chrome, designed to fit Knightsbridge CyroLED recessed downlights. The bezel provides the visible finished edge around the downlight aperture once the fitting is installed in the ceiling, and supports both fixed and tilt downlight mechanisms depending on which CyroLED module is paired with it.\u003c\/p\u003e\n\u003cp\u003eIntended for residential and commercial recessed lighting installations, the bezel suits kitchens, hallways, offices and retail spaces where a consistent metallic finish is needed across multiple downlights. The brushed chrome finish provides a low-sheen metallic surface that sits between the high reflectivity of polished chrome and the warmth of brushed brass, making it a neutral choice for contemporary interiors and commercial fit-outs where cooler tones are specified.\u003c\/p\u003e\n\u003cp\u003eThe ABS construction keeps the bezel lightweight and resistant to the heat generated by LED downlights, while the 4mm height provides a slim profile that sits close to the ceiling plane once installed. The brushed texture on the chrome finish hides fingerprints and installation marks better than polished chrome, and the surface can be wiped clean with a soft cloth during maintenance.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-CYRBZBC.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich CyroLED downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel is designed specifically for Knightsbridge CyroLED recessed downlights, both fixed and tilt versions. Check the CyroLED downlight product page to confirm compatibility with the specific module you're installing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this bezel suitable for bathroom installations?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It has no stated IP rating, so it is for dry rooms only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between fixed and tilt bezels?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bezel supports both fixed and tilt CyroLED modules. The mechanism that allows tilting is built into the downlight module itself, not the bezel. The bezel provides the finished trim ring regardless of whether the module behind it is fixed or tiltable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this bezel range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces CyroLED bezels in multiple finishes including white, polished chrome, satin chrome, brushed brass, matt black and others. Use the search function or filters at Niori to find other finishes in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":52475343208715,"sku":"CYRBZBC","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/2124640_bb055089-a443-40e9-9743-81a76c4aff18.jpg?v=1760643109"},{"product_id":"cyroled-fixed-and-tilt-bezel-polished-brass","title":"CyroLED Fixed and Tilt Bezel - Polished Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge CyroLED bezel is an 86mm diameter polished brass trim ring that fits over CyroLED fixed and tilt downlight fittings. The bezel is moulded from ABS plastic with a vacuum-metallised brass finish, giving a mirror-polished metallic surface that sits flush with the ceiling once the downlight is installed. The 4mm height means the bezel projects minimally below the ceiling plane.\u003c\/p\u003e\n\u003cp\u003eDesigned for both fixed and tilt CyroLED downlight models, the bezel clips onto the downlight housing after the housing is recessed into the ceiling void. The polished brass finish provides a warm metallic accent that pairs with traditional brass switches, sockets and door furniture in period properties, hospitality fit-outs and residential schemes where brass detailing is part of the design language.\u003c\/p\u003e\n\u003cp\u003eThe ABS construction keeps the bezel lightweight and resistant to tarnishing compared to solid brass, while the vacuum-metallised finish delivers a consistent polished tone across multiple fittings. The 86mm outer diameter suits standard ceiling apertures for recessed downlights and provides a defined edge between the ceiling surface and the light source below.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-CYRBZB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich CyroLED downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel fits all CyroLED fixed and tilt downlight models from Knightsbridge. It clips onto the downlight housing after the housing is recessed into the ceiling void and secured.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bezel solid brass or plated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel is moulded from ABS plastic with a vacuum-metallised brass finish. This provides a polished brass appearance with lighter weight and no tarnishing compared to solid brass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be painted over if the room is redecorated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe polished brass finish is intended to remain exposed. Painting over the bezel would obscure the metallic finish and is not recommended. If a paintable bezel is needed, Knightsbridge offers white and other finishes designed for overpainting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available for CyroLED bezels?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces CyroLED bezels in a range of finishes including polished chrome, brushed chrome, white, black and antique brass. Use the search function or downlight bezel filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":52475343372555,"sku":"CYRBZB","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/2124650_1d15ce92-9cf3-4649-86e0-35b22f6d7ab9.jpg?v=1760643110"},{"product_id":"cyroled-fixed-and-tilt-bezel-antique-brass","title":"CyroLED Fixed and Tilt Bezel - Antique Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe CyroLED Fixed and Tilt Bezel is an 86mm diameter antique brass trim ring designed for Knightsbridge CyroLED downlights. The bezel is made from ABS finished in a brushed antique brass tone that resembles aged brass with directional grain texture. At 4mm height the bezel sits just proud of the ceiling line, giving the downlight a defined edge where the fitting meets the plasterwork.\u003c\/p\u003e\n\u003cp\u003eCompatible with both fixed and tilt versions of the CyroLED downlight, the bezel clips onto the downlight housing after the lamp is installed in the ceiling void, allowing the finish to be changed without re-wiring. The antique brass finish suits traditional, classical and heritage-style interiors where polished chrome or white would be too stark, and pairs well with oak joinery, terracotta tiles and warm-toned paint schemes. The bezel is common in period-property refurbishments, listed buildings and boutique hospitality spaces where modern LED downlights are required but need to match existing brass light switches, door furniture or period brassware.\u003c\/p\u003e\n\u003cp\u003eThe ABS construction is lighter than solid brass but holds the brushed finish pattern through handling during installation. The low profile means the bezel does not protrude significantly into the room, keeping the downlight appearance close to flush-mounted. The 86mm outer diameter is consistent across the CyroLED bezel range, so switching between finishes or styles requires only swapping the bezel trim rather than replacing the entire downlight.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-CYRBZAB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich CyroLED downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel fits all Knightsbridge CyroLED fixed and tilt downlights with the standard 86mm bezel mount. Check the downlight specification or packaging to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be swapped after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The bezel clips onto the downlight housing after the lamp is installed in the ceiling. You can swap between different bezel finishes without re-wiring or removing the downlight from the ceiling void.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bezel solid brass?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The bezel is made from ABS with a brushed antique brass finish. ABS is lighter than solid brass, making installation easier, and holds the finish pattern through repeated handling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat finish options are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces CyroLED bezels in a range of finishes including polished chrome, brushed chrome, satin nickel, white, black and antique brass. Use the search function to find other finishes in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":52475343733003,"sku":"CYRBZAB","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/2124660_2b34cc87-4919-40ac-b1e5-b46f5b4f6587.jpg?v=1760643112"},{"product_id":"cyroled-anti-glare-bezel-white","title":"CyroLED Anti-Glare Bezel - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe CyroLED Anti-Glare Bezel is an 86mm diameter white ABS ring designed to retrofit onto Knightsbridge CyroLED downlights, reducing direct glare and projecting 5mm from the surface it is fitted to. The bezel clips onto the downlight housing after installation, creating a deeper well around the lamp that prevents direct sightlines to the LED while maintaining full light output.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential living rooms, bedrooms, hallways and commercial offices where downlights are positioned within typical sightlines, the anti-glare bezel is particularly useful in rooms with lower ceiling heights (2.4m or below) or where downlights are installed near seating positions.\u003c\/p\u003e\n\u003cp\u003eThe white ABS construction is lightweight and fits flush with the ceiling surface once clipped in place, presenting as a simple white ring that blends with painted plasterboard ceilings. The matt finish on the white surface prevents reflections and maintains a uniform appearance across multiple downlights in the same room. The bezel adds minimal projection beyond the downlight's existing footprint and requires no additional wiring or modification to the downlight itself.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-CYRAGBZW.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CyroLED Anti-Glare Bezel is designed to fit Knightsbridge CyroLED downlights with an 86mm cut-out. Check the specification of your existing downlight to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it reduce light output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel projects 5mm from the surface it is fitted to and reduces direct glare, but does not block or filter the light itself. The overall room illumination remains the same, with the primary change being reduced glare when looking directly at the downlight from typical viewing angles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be retrofitted to existing downlights?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The bezel clips onto compatible CyroLED downlights after they have been installed in the ceiling, without requiring any rewiring or removal of the downlight housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for fire-rated downlights?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFire-rating depends on the downlight housing itself, not the bezel. Adding the bezel does not affect the fire-rating of a certified fire-rated downlight, provided the bezel is fitted correctly and does not obstruct ventilation or clearance zones specified by the downlight manufacturer.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":52475343896843,"sku":"CYRAGBZW","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/2124716_3d39f31e-8585-4f68-8583-a89db0d0bb53.jpg?v=1760643115"},{"product_id":"cyroled-anti-glare-bezel-matt-black","title":"CyroLED Anti-Glare Bezel - Matt Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe CyroLED Anti-Glare Bezel is an 86mm diameter ABS trim ring designed specifically for CyroLED Anti-Glare recessed downlights, finished in a non-reflective matt black. The bezel clips onto the downlight housing and projects 5mm from the ceiling plane.\u003c\/p\u003e\n\u003cp\u003eUsed in offices, hospitality lounges, residential living rooms and commercial interiors where glare control matters, the bezel narrows the beam spread and prevents light spill into peripheral vision. The matt black finish absorbs rather than reflects ambient light, making the ceiling aperture visually recede and giving a cleaner, more defined ceiling plane. The ABS construction is lightweight, impact-resistant and dimensionally stable under normal operating temperatures.\u003c\/p\u003e\n\u003cp\u003eThe 86mm outer diameter matches standard UK ceiling cut-outs for recessed downlights, allowing the bezel to sit flush with plasterboard or solid ceilings without additional trimming. The matt black pairs cleanly with dark ceilings, industrial interiors, and contemporary schemes where metal tones (brass, chrome, copper) are used elsewhere as accent finishes. The bezel is compatible only with CyroLED Anti-Glare downlight models — check the downlight specification before ordering to confirm fitment.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-CYRAGBZMB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich downlights is this bezel compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel is designed specifically for CyroLED Anti-Glare recessed downlight models. It will not fit standard CyroLED downlights or other brands — check the downlight model before ordering to confirm compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the 5mm projection mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel projects 5mm from the ceiling plane. This reduces glare and narrows the effective beam spread.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be painted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eABS can be painted with appropriate primers and paints designed for plastic surfaces, but doing so may alter the anti-glare performance of the matt finish. Most users install the bezel as-supplied.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling cut-out diameter is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 86mm diameter matches standard UK recessed downlight cut-outs. The bezel clips onto the downlight housing after the housing is installed in the ceiling void, so the cut-out size is determined by the downlight itself, not the bezel.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":52475344060683,"sku":"CYRAGBZMB","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/2124724_12994cbd-1f39-418c-8638-a87883f9daba.jpg?v=1760643116"},{"product_id":"cyroled-anti-glare-bezel-white-with-black-baffle","title":"CyroLED Anti-Glare Bezel - White With Black Baffle","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe CyroLED Anti-Glare Bezel is an 86mm diameter trim ring in matt white ABS with a matt black internal baffle, designed specifically for use with Knightsbridge CyroLED Anti-Glare downlights. The white outer ring sits flush with the ceiling finish while the recessed black baffle reduces direct glare by controlling the viewing angle of the lamp inside the downlight.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installations where glare control matters — living rooms, bedrooms, hallways and office spaces — the bezel clips onto the CyroLED downlight housing after the ceiling cut-out has been made. The white finish blends with standard white or off-white ceiling paint, while the black baffle absorbs stray light reflections that would otherwise bounce back into the room at angles that cause discomfort. The 5-degree projection from the ceiling plane keeps the bezel nearly flush with the ceiling surface.\u003c\/p\u003e\n\u003cp\u003eThe ABS construction provides durability without the weight or thermal expansion issues of metal bezels, and the matt finish on both the white and black surfaces resists fingerprints during installation. The 86mm diameter is standard for CyroLED Anti-Glare downlights and matches the ceiling aperture required for that range, so no additional cutting or adaptation is needed once the downlight itself has been fitted.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White \u0026amp; Matt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-CYRAGBZWB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat CyroLED downlights does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel is designed for Knightsbridge CyroLED Anti-Glare downlights with an 86mm aperture. Check the downlight's specification or product listing to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the black baffle reduce glare?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe matt black baffle absorbs light that would otherwise reflect off a white or metallic interior surface and bounce into the room at uncomfortable angles. By controlling the viewing angle, the baffle lets the downlight's light output reach the floor and surfaces below while minimising direct glare when viewed from seated or standing positions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be painted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe white ABS outer ring can be painted with standard emulsion if you need to match a specific ceiling colour. The black baffle should not be painted, as altering its matt black finish would reduce its glare-control effectiveness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bezel sold with the downlight or separately?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel is sold separately, allowing you to choose the finish that suits your installation. CyroLED downlights are available with different bezel options, so check whether your downlight includes a bezel or requires one to be ordered alongside it.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":52475344158987,"sku":"CYRAGBZWB","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/2124730_c8b3ace5-550e-4fb0-88f3-84073919e791.jpg?v=1760643118"},{"product_id":"renuled-bezel-antique-brass","title":"RenuLED Bezel - Antique Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge downlight bezel is an interchangeable antique brass magnetic trim for the matching LED panel.\u003c\/p\u003e\n\u003cp\u003eIt is an interchangeable magnetic trim for the matching CPLCW LED panel, letting the visible finish be changed in seconds without tools.\u003c\/p\u003e\n\u003cp\u003eIt is constructed from ABS. It is manufactured to the relevant British Standards.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e88 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_RE6BZAB_datasheet.pdf?v=1782821136\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eAre the bezels interchangeable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes — the magnetic bezel simply changes the visible trim finish of the matching panel without tools, so the look can be updated at any time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich panel does this bezel fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is matched to the corresponding CPLCW LED panel size shown in the title (for example a CPLCW8 bezel fits the CPLCW8 panel).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the bezel affect the light output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo — the bezel is a decorative trim only and does not change the panel’s output or beam.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":53211709866251,"sku":"RE6BZAB","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_RE6BZAB.jpg?v=1782820600"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/collections\/New_menu_images_1960218c-743f-4870-9a8b-62706ebf76b3.jpg?v=1782897642","url":"https:\/\/niori.co.uk\/collections\/downlight-bezels.oembed?page=3","provider":"Niori","version":"1.0","type":"link"}