{"title":"Brass Sockets","description":"\u003cp\u003eBrass is the finish people choose when they want the electrics to belong to the room rather than disappear into it. We stock Knightsbridge's brass sockets in three quite different brasses, antique, polished and brushed, with black or white inserts, in single and double gangs, switched and unswitched. The insert changes the look as much as the plate does, which is the part most people only notice once it is on the wall.\u003c\/p\u003e","products":[{"product_id":"13a-2-gang-dp-switched-socket-twin-earth-antique-brass-square-edge-black-insert","title":"13A 2 Gang DP Switched Socket Twin Earth - Antique Brass Square Edge (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang DP switched socket features twin earth terminals behind an antique brass square edge faceplate with black insert. The double-pole switching isolates both live and neutral lines when the socket is switched off, providing additional safety over single-pole switching for high-draw appliances rated up to 3,120W per outlet.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and office installation, the socket fits a standard 25mm minimum back box depth and uses screw-fixed installation on a metal mounting frame. The square edge design sits flat to the wall surface with a built-in gasket that simplifies positioning during installation and provides a defined edge against painted or wallpapered surfaces.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish shows a warm, aged patina that pairs with traditional, classical and heritage interiors where polished finishes would appear too modern. The black insert behind the brass faceplate hides the back of the cover plate and gives a defined edge to each outlet aperture and rocker switch. Twin earth terminals are required in installations where high-integrity earthing is specified, such as medical rooms, commercial kitchens or installations with sensitive electronic equipment.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e89 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e149.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e10.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2350121_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1283760.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are twin earth terminals and when are they required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwin earth terminals provide two separate earth connections instead of the standard single terminal. They are specified in high-integrity earthing installations such as medical rooms, commercial kitchens, or installations with sensitive electronic equipment where a redundant earth path is required. For standard domestic installations a single earth terminal is sufficient.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The square edge faceplate adds 10.5mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this socket suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the socket is designed for dry indoor locations only. For outdoor or bathroom installations where moisture is present, a socket with IP44 or higher is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this square edge style in a range of finishes including polished chrome, brushed chrome, polished brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293546963211,"sku":"CS9AB","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1673450_309123f9-dfab-45af-8486-9f7e06e31c51.jpg?v=1714660092"},{"product_id":"115v-230v-dual-voltage-shaver-socket-antique-brass-black-insert-square-edge","title":"115V\/230V Dual Voltage Shaver Socket - Antique Brass (Black Insert) Square Edge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge dual voltage shaver socket provides both 115V and 230V outlets behind an antique brass square-edge faceplate with a black insert. Certified to EN 61558, the socket is designed specifically for electric shavers and toothbrushes in bathrooms, en-suites and hotel guest rooms where dual-voltage capability is needed for different appliance types.\u003c\/p\u003e\n\u003cp\u003eThe socket fits a 47mm minimum back box depth and is rated IP20, making it suitable for Zone 3 bathroom installation (outside the direct spray zones). The dual-voltage switching allows the same outlet to serve 115V North American-spec shavers and 230V European-spec devices without needing separate sockets. The integrated gasket between the faceplate and back box provides a seal against moisture ingress in humid bathroom environments.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish has a warm, aged patina that pairs well with traditional, period and country-style bathrooms, particularly those with brass taps, towel rails or cabinet hardware. The square-edge profile sits flush to the wall with minimal projection, and the black insert behind the faceplate provides contrast against the brass and hides the back of the cover plate. Premium-grade steel construction gives the faceplate rigidity and a substantial feel compared to plastic alternatives.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\" style=\"width: 100%; height: 196px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eHeight\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e149.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eWidth\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e89 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eProjection\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e10.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eIP Rating\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eTerminal\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2350203_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1283710.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between 115V and 230V?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 115V outlet is designed for North American-spec shavers and toothbrushes that run on lower voltage. The 230V outlet serves standard UK and European appliances. The socket provides both voltages from a single faceplate, so you can use either type of device without needing separate installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, with an IP20 rating the socket is suitable for Zone 3 bathroom installation, which is the area outside the direct spray zones (typically 600mm+ from a bath or shower enclosure). The integrated gasket provides additional moisture protection. It should not be installed in Zones 0, 1 or 2 where direct water contact is possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is needed for safe installation. The faceplate adds 10.5mm of projection from the wall once fitted, giving a total depth of approximately 57.5mm from the wall surface to the back of the back box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this dual voltage shaver socket in a range of finishes including polished chrome, brushed chrome, polished brass, matt black and white. Use the search function or filters to find other variants in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293547749643,"sku":"CS89AB","price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1673420_c18f18de-e083-44be-b586-cfaddb593806.jpg?v=1714660104"},{"product_id":"13a-1-gang-dp-switched-socket-antique-brass-black-insert-square-edge","title":"13A 1 Gang DP Switched Socket - Antique Brass (Black Insert, Square Edge)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge CS7AB is a 13A 1-gang DP switched socket finished in antique brass with a black insert and square edge profile. The faceplate is constructed from premium-grade steel with a brushed antique brass finish that darkens slightly in the grain lines, giving it a warmer, aged appearance compared to polished or satin brass. The black insert behind the socket aperture provides visual definition and hides the back of the mounting plate.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installation, the socket fits a standard 25mm minimum back box depth and uses screw-fixed mounting rather than a screwless cover system. The exposed screw caps match the antique brass finish. The double-pole switching isolates both live and neutral when switched off, providing additional safety margin over single-pole switching for high-draw appliances or in environments where full isolation is preferred.\u003c\/p\u003e\n\u003cp\u003eThe square edge profile gives the socket a defined geometric outline against the wall, without the soft radius of rounded-edge alternatives. The 89mm square footprint and 10.5mm projection from the wall make it suitable for standard UK single-gang installations. The antique brass finish pairs well with period properties, heritage restoration projects, and warm-toned contemporary interiors where a brass accent is wanted without the high shine of polished finishes. The socket carries IP20 rating for indoor dry-location use and is backed by Knightsbridge's 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e89 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e89 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e10.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2350223_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1283580.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The faceplate adds 10.5mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a screwless socket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The CS7AB uses screw-fixed mounting with visible screw caps that match the antique brass finish. For a screwless version in antique brass, see the Knightsbridge screwless range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between antique brass and polished brass?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAntique brass has a brushed, darkened finish with tonal variation that gives it an aged, warmer appearance. Polished brass is bright and reflective with a mirror-like surface. Antique brass works better in period properties or where a softer metallic accent is wanted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this square edge socket style in polished chrome, brushed chrome, polished brass, satin brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293547782411,"sku":"CS7AB","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1672740_628b1e85-3bc8-45f1-89ab-f96d1002c9e2.jpg?v=1714660106"},{"product_id":"45a-dp-cooker-switch-13a-socket-with-neons-antique-brass-black-insert","title":"45A DP Cooker Switch \u0026 13A Socket with Neons - Antique Brass (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge cooker control unit combines a 45A double-pole switch with a 13A switched socket behind an antique brass faceplate with black insert. The 45A switch controls high-load cooking appliances up to 10,350W (at 230V), while the integrated 13A socket provides a standard outlet for smaller kitchen devices. Red neon indicators show when each circuit is live, providing visual confirmation before maintenance work.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchens where a cooker, hob, or range requires a dedicated isolation switch within 2 metres of the appliance as per UK wiring regulations. The double-pole switching isolates both live and neutral lines when off, ensuring complete disconnection from the mains during cleaning or repair. The 13A socket outlet allows a kettle, microwave, or small appliance to be powered from the same unit, reducing the need for separate socket positions near the cooker.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish shows a warm, aged patina that suits traditional and country-style kitchens, pairing with brass cabinet handles, taps and period fixtures. The black insert behind the brass faceplate defines the switch and socket apertures and conceals the back of the cover plate. The unit requires a 47mm minimum mounting box depth and uses screw-fixed installation with visible fixing screws at each corner. Knightsbridge backs this with a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e89 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e149.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e10.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4969269_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat appliances does the 45A switch control?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 45A rating handles electric cookers, hobs, ranges and ovens with a total load up to 10,350W at 230V. This covers most domestic cooking appliances. The unit must be installed within 2 metres of the appliance it controls, as required by UK wiring regulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the neon indicators for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe red neon indicators show when each circuit is live. One neon corresponds to the 45A cooker circuit, the other to the 13A socket. This provides visual confirmation that the circuit is isolated before starting maintenance or cleaning work on the appliance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum mounting box depth is needed for safe installation. The faceplate adds 10.5mm of projection from the wall once fitted, giving a total depth of approximately 57.5mm from the wall surface to the front of the plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a screwless faceplate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a screw-fixed faceplate with visible fixing screws at each corner. Knightsbridge produces screwless versions in some finishes — use the search function to check availability in antique brass if a screwless finish is preferred.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293658898699,"sku":"CS83MNAB","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1673412_0d988b2a-496d-46c2-8b68-421344645019.jpg?v=1714662018"},{"product_id":"45a-dp-cooker-switch-13a-socket-with-neons-brushed-brass-black-insert","title":"45A DP Cooker Switch \u0026 13A Socket with Neons - Brushed Brass (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge 45A DP cooker switch combines a double-pole isolation switch rated at 45A with a 13A switched socket outlet, housed behind a brushed brass faceplate with a black insert. Both the 45A switch and the 13A socket have neon indicators that illuminate when the respective circuit is live, providing visual confirmation of power status before maintenance or cleaning work begins.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchens where electric cookers, ovens, and hobs need to be isolated at the wall for safety during cleaning or servicing, the 45A switch provides full double-pole isolation, disconnecting both live and neutral lines when switched off. The additional 13A socket allows small kitchen appliances such as kettles, toasters or mixers to be plugged in at the same location, reducing the need for separate socket installations near the cooker position. The unit requires a 47mm minimum back box depth and fits standard UK wiring configurations.\u003c\/p\u003e\n\u003cp\u003eThe premium-grade steel construction and brushed brass finish provide durability in high-use kitchen environments where moisture, heat and repeated switching are typical. The black insert behind the brass faceplate defines the edges of each switch and socket aperture, giving a clean visual separation between control elements. The brushed finish reduces fingerprint visibility compared to polished brass, making it suitable for high-traffic areas. Knightsbridge backs this unit with a 25-year warranty, reflecting the construction quality and expected lifespan in residential and light commercial kitchens.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4969422_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between this and a standard socket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 45A switch is rated to isolate high-draw cooking appliances like electric ovens and hobs, which typically draw 30-45A on a dedicated circuit. Standard 13A sockets only handle loads up to 3,120W (13A at 230V). The 13A socket on this unit is a secondary outlet for small appliances, not the cooker itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 47mm back box depth is needed to accommodate the switch mechanism and socket terminals. Standard 35mm boxes are not suitable for this unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do the neon indicators show?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach neon illuminates when its circuit is live. The neon on the 45A switch confirms power to the cooker circuit even when the switch is off, while the 13A socket neon confirms the socket is switched on and live. This allows visual confirmation before starting maintenance work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this to control two separate cookers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The 45A switch is designed to isolate a single high-draw cooking appliance or a combined cooker\/oven installation on one circuit. The 13A socket is for secondary appliances only and cannot power a second cooker.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293660766475,"sku":"FPR83MNBB","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1106686_3ea1c673-a6e9-43cb-a2e6-1e5172d8974c.jpg?v=1714662056"},{"product_id":"45a-dp-cooker-switch-13a-socket-neons-polished-brass-black-insert","title":"45A DP Cooker Switch \u0026 13A Socket Neons - Polished Brass (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 45A DP cooker switch and 13A socket combines a 45-amp double-pole isolator for a cooker circuit with a standard 13A switched socket in a single polished brass flat plate. The 45A switch features neon indicators that confirm power status, while the 13A socket adds an auxiliary outlet suitable for small kitchen appliances such as kettles, toasters or food processors within reach of the cooker position.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchens where Building Regulations require an accessible isolator within 2 metres of the cooker, this unit allows an electric cooker or hob to be safely isolated for cleaning or maintenance without requiring access to the consumer unit. The double-pole switching isolates both live and neutral lines when turned off, preventing accidental activation during servicing. The 13A socket operates independently of the 45A switch, so auxiliary appliances can be used even when the cooker circuit is isolated.\u003c\/p\u003e\n\u003cp\u003eThe flat plate sits just 2.5mm proud of the wall surface once fitted to a 47mm minimum back box, giving a low-profile finish suited to modern kitchens. The polished brass faceplate with black insert provides a warm metallic accent that pairs with traditional brass cabinet hardware, aged brass taps and warm-toned stone worktops. The premium-grade steel construction behind the plate carries a 25-year warranty against manufacturing defects, and the plate is IP20 rated for standard indoor kitchen installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4969439_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is required for safe installation. The flat plate adds only 2.5mm of projection from the wall once fitted, giving a low-profile finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the 45A switch and 13A socket operate independently?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 45A switch controls the cooker circuit only. The 13A socket operates independently, so auxiliary appliances can be used even when the cooker circuit is isolated via the 45A switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do the neon indicators show?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe neon indicators on the 45A switch confirm when power is flowing to the cooker circuit. When the switch is in the 'on' position and the circuit is live, the neon glows. When the switch is off, the neon is dark.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for induction hobs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 45A rating handles loads up to 10,350W on a 230V circuit, which covers most domestic electric cookers and induction hobs. Check the appliance nameplate rating before specifying to ensure the load does not exceed 45A.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293661389067,"sku":"FPR83MNPB","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1106700_7d9c3683-78b4-4204-aae5-d3346c19253b.jpg?v=1714662067"},{"product_id":"45a-dp-cooker-switch-13a-socket-with-neons-polished-brass-screwless-black-insert","title":"45A DP Cooker Switch \u0026 13A Socket with Neons - Polished Brass Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 45A DP cooker switch combines a double-pole 45A isolator switch with a 13A switched socket behind a polished brass screwless faceplate with black insert. The 45A switch is rated for high-draw cooking appliances — electric cookers, ovens, hobs and ranges drawing up to 10,440W on 230V mains. The 13A socket to the right handles standard appliances up to 3,000W, typically used for kettles, slow cookers or small counter-top appliances near a cooker installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchen installation within 2m of the cooking appliance, the unit allows both the cooker circuit and socket to be isolated independently. The 45A switch is double-pole, meaning both live and neutral are broken when switched off, providing full electrical isolation for maintenance or repair. Red neon indicators behind each switch rocker glow when the circuit is live, giving a visual confirmation of status without needing to test with a meter. The engraved \"COOKER\" label below the 45A switch identifies its function.\u003c\/p\u003e\n\u003cp\u003eThe screwless faceplate clips onto a separate metal sub-frame fixed to the back box, leaving no visible screws or fixings on the wall once installed. The polished brass finish is achieved on premium-grade steel and pairs with traditional, classical and warm contemporary kitchens. The black insert frames each switch and socket aperture cleanly and hides the back of the faceplate. Installation requires a minimum 47mm back box depth to accommodate the switch mechanism and socket terminals behind the frame.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4971537_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat appliances does the 45A switch control?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 45A double-pole switch is rated for electric cookers, ovens, hobs and ranges drawing up to 10,440W on 230V mains. It provides full circuit isolation for the cooking appliance, allowing safe maintenance and preventing accidental activation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the 13A socket used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 13A socket is for standard kitchen appliances up to 3,000W — kettles, toasters, slow cookers, blenders. It is on a separate switched circuit from the 45A cooker switch and can be used independently.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do the neon indicators show?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRed neon indicators behind each switch rocker glow when the circuit is live. This provides a visual confirmation that power is present without needing to test with a meter, useful when isolating for maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 47mm back box depth is needed to accommodate the switch mechanism, socket terminals and cable connections. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293666730251,"sku":"SFR83MNPB","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1106760_8a8b0fb6-6c85-4a23-8ede-e977c4bee0cc.jpg?v=1714662155"},{"product_id":"45a-dp-cooker-switch-13a-socket-neons-polished-brass-screwless-white-insert","title":"45A DP Cooker Switch \u0026 13A Socket Neons - Polished Brass Screwless (White Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 45A DP cooker switch with 13A socket combines a double-pole isolation switch rated at 45A with a separate 13A switched socket outlet, both behind a polished brass screwless faceplate with a white insert. Red neon indicators on both switches light up when the circuits are live, providing at-a-glance confirmation of the power state.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation within 2m of a cooker or range, the 45A switch isolates the appliance circuit for safe maintenance and cleaning, preventing accidental operation while the cooker is out of use. The separate 13A socket supplies small kitchen appliances — kettles, toasters, slow cookers — without needing a separate outlet installed nearby. Both switches are double-pole, isolating both live and neutral lines when switched off.\u003c\/p\u003e\n\u003cp\u003eThe screwless cover plate clips onto a separate metal sub-frame fixed to the back box, hiding all fixings behind the polished brass face. The white insert behind the brass faceplate frames each switch and socket aperture, creating defined edges and providing contrast against the warm metallic finish. The unit requires a 47mm minimum back box depth and measures 147.5mm wide by 87.5mm high once installed, fitting standard UK wiring regulations for cooker control units.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4971540_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1293214.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the 45A switch and the 13A socket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 45A switch controls the cooker or range circuit, rated to handle up to 10,350W of load at 230V. The 13A socket is a separate outlet rated at 3,120W, designed for small kitchen appliances like kettles and toasters. Both switches are double-pole and isolate live and neutral when switched off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the neon indicator show?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach switch has a small red neon that illuminates when the circuit is live. This provides at-a-glance confirmation that power is flowing to the cooker or socket, even if the appliance itself is not currently drawing current.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is needed to accommodate the wiring terminals and switching mechanism. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this control two separate cooking appliances?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 45A switch can control two or more cooking appliances wired on the same circuit, provided the combined load does not exceed the 45A rating. For example, a cooker and separate hob can both be isolated by this single switch if wired to the same cooker circuit.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293666861323,"sku":"SFR83MNPBW","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1106758_f7c62e5e-e5b5-4cb9-a05d-c5fc9540d98d.jpg?v=1714662158"},{"product_id":"13a-2-gang-sp-switched-socket-dual-usb-a-usb-c-brushed-brass-flat-plate-black-insert","title":"13A 2 Gang SP Switched Socket Dual USB-A \u0026 USB-C - Brushed Brass Flat Plate (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang SP switched socket adds one USB-A and one USB-C charging port behind a brushed brass flat plate with a black insert. The single-pole switching breaks the live connection when the socket is switched off, suitable for standard domestic appliance loads up to 13A (3,120W) per outlet.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and office installation, the socket fits a standard 25-35mm back box depth depending on cable routing. The ultra-flat plate construction projects just 2.5mm from the wall surface once fitted, with an integrated gasket behind the faceplate providing a sealed edge against the wall. The brass rockers match the faceplate finish, maintaining a consistent appearance across both switches and sockets.\u003c\/p\u003e\n\u003cp\u003eThe brushed brass finish provides a warm metallic accent that pairs well with traditional, classical and warm-toned contemporary interiors. The black insert behind the brass faceplate hides the back of the cover plate and gives a defined edge to each outlet aperture. The dual USB charger provides 5V DC 4.0A shared output across both ports, supporting legacy USB-A cables and modern USB-C fast-charge protocols without needing separate adapters.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5742972_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for typical installations. Where cable routing requires more space, up to 35mm depth may be necessary. The 2.5mm flat plate projection means total wall-to-surface depth remains minimal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dual USB charger provides 5V DC 4.0A shared across both USB-A and USB-C ports. When charging two devices simultaneously, the total output is split between them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this single-pole or double-pole switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is single-pole (SP) switching, which breaks the live connection only. For double-pole switching that isolates both live and neutral, see the DP variants in the Knightsbridge range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this flat plate range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this flat plate style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293691502859,"sku":"FPR9940BB","price":27.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1526858_7210e817-d4eb-48d8-a23c-1eb0312d3226.jpg?v=1714662651"},{"product_id":"13a-2-gang-sp-switched-socket-dual-usb-a-usb-c-polished-brass-flat-plate-black-insert","title":"13A 2 Gang SP Switched Socket Dual USB-A \u0026 USB-C - Polished Brass Flat Plate (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang SP switched socket adds one USB-A and one USB-C charging port behind a polished brass flat plate faceplate with black insert. The single-pole switching isolates the live line when the socket is switched off, while the dual USB ports share a 5V DC 4.0A output for charging phones, tablets and portable devices without needing a separate plug adapter.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential installation in living rooms, bedrooms, kitchens and home offices, the socket fits a standard 25-35mm back box depending on wiring conditions. The flat plate design sits just 2.5mm proud of the wall surface once fitted, giving an ultra-low profile that works well in contemporary interiors where minimal projection is preferred. The polished brass faceplate with matching brass rockers provides a warm metallic accent that pairs well with traditional, classical and warm-toned modern interiors.\u003c\/p\u003e\n\u003cp\u003eThe black insert behind the brass faceplate hides the back of the cover plate and gives a defined edge to each outlet aperture and switch rocker. The USB-C port supports modern fast-charge protocols, while the USB-A retains compatibility with older cables and devices. Both USB ports share a combined 4.0A output, so charging speed adjusts depending on whether one or two devices are connected simultaneously. The premium-grade steel construction carries a Class I rating and IP20 ingress protection for standard indoor use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5742978_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25-35mm back box depth is needed depending on wiring conditions. The flat plate adds just 2.5mm projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dual USB ports share a combined 5V DC 4.0A output. When one device is connected, it receives the full 4.0A. When two devices are connected simultaneously, the output is shared between them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between SP and DP switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis socket uses single-pole (SP) switching, which isolates the live line when switched off. Dual-pole (DP) switching isolates both live and neutral, providing additional safety for high-draw appliances. SP switching is standard for most domestic applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this flat plate style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293691633931,"sku":"FPR9940PB","price":27.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1526882_6752185b-74e4-4b87-8792-bfe4d9bca809.jpg?v=1714662655"},{"product_id":"13a-2-gang-sp-switched-socket-dual-usb-a-usb-c-antique-brass-square-edge-black-insert","title":"13A 2 Gang SP Switched Socket Dual USB-A \u0026 USB-C - Antique Brass Square Edge (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang SP switched socket adds one USB-A and one USB-C charging port behind an antique brass square edge faceplate with a black insert. The single-pole switching disconnects the live line when the socket is switched off, providing control over connected appliances without the need to pull plugs.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and office installation, the socket fits a standard 25-35mm back box depth depending on wiring configuration and uses a metal faceplate with a built-in gasket to sit flush against the wall. The square edge design gives a defined 90-degree border around the plate, contrasting with rounded-edge plates in the same range. The 13A rating handles standard UK appliance loads up to 3,120W per outlet.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish provides a warm, aged metallic accent that pairs well with traditional, period and heritage-style interiors. The black insert behind the brass faceplate hides the back of the cover plate and gives a defined edge to each outlet aperture. The dual USB ports share a combined 5V DC 4.0A output (maximum 20W total), allowing simultaneous charging of two devices such as a smartphone and tablet, with the USB-C port supporting modern fast-charge protocols where the connected device allows.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e89 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e149.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e10.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5743084_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 25mm back box depth is needed for basic installation. In some wiring conditions, such as where additional cables are present or where the socket sits on an external wall, a 35mm back box may be required. The 10.5mm projection from the wall is consistent across both depths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe USB-A and USB-C ports share a combined output of 5V DC 4.0A, with a maximum total of 20W across both ports. If both ports are in use simultaneously, the 4.0A is divided between them. The USB-C port supports fast-charge protocols where the connected device allows.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is single-pole (SP) switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSingle-pole switching disconnects the live line only when the socket is switched off. The neutral remains connected. This differs from double-pole (DP) switching, which isolates both live and neutral. SP switching is standard for most UK domestic installations and meets wiring regulations for general socket use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this socket style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293692158219,"sku":"CS9940AB","price":27.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1797260_724cb14d-54a8-4612-908b-ca8032b59daa.jpg?v=1714662669"},{"product_id":"13a-2-gang-sp-switched-socket-dual-usb-a-usb-c-polished-brass-screwless-black-insert","title":"13A 2 Gang SP Switched Socket Dual USB-A \u0026 USB-C - Polished Brass Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang SP switched socket adds one USB-A and one USB-C charging port behind a polished brass screwless faceplate with a black insert. The single-pole switching controls the live line only, suitable for standard residential loads where dual-pole isolation is not required. The USB ports share a 5V 4A output, providing up to 20W of charging power split between connected devices.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and hospitality installation, the socket fits a standard 25-35mm back box depth depending on wiring conditions and uses a screwless cover plate that clips onto a separate metal sub-frame. This means there are no visible screws or fixings on the wall once installed, giving a cleaner finish than traditional screw-fixed plates. The built-in gasket sits between the sub-frame and the cover plate, preventing dust ingress around the edges and maintaining a tight seal against the wall surface.\u003c\/p\u003e\n\u003cp\u003eThe polished brass finish provides a warm metallic accent that pairs well with traditional, classical and warm-toned contemporary interiors. The black insert behind the brass faceplate hides the back of the cover plate and gives a defined edge to each outlet aperture. The premium-grade steel construction provides a substantial feel at 4.3mm projection from the wall once fitted, thinner than standard screw-fixed plates. The IP20 rating confirms this is an indoor socket not rated for bathroom zones or outdoor use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5743204_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25-35mm back box depth is needed depending on wiring conditions. The screwless cover plate adds 4.3mm of projection from the wall once fitted, making this one of the slimmer profiles in the Knightsbridge range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe USB-A and USB-C ports share a 5V 4A output, providing up to 20W total charging power. When both ports are in use, the 4A is divided between the two devices. Knightsbridge recommends using certified USB cables to ensure safety and compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between SP and DP switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSP (single-pole) switching controls the live line only. DP (dual-pole) switching isolates both live and neutral lines when switched off, providing additional safety for high-draw appliances. This SP model is suitable for standard residential loads where DP isolation is not required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring. The built-in gasket maintains a dust-tight seal when refitted.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293693796619,"sku":"SFR9940PB","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1527074_1c89636c-9551-4106-a63b-adaeb036d76f.jpg?v=1714662718"},{"product_id":"13a-2-gang-sp-switched-socket-dual-usb-a-usb-c-polished-brass-screwless-white-insert","title":"13A 2 Gang SP Switched Socket Dual USB-A \u0026 USB-C - Polished Brass Screwless (White Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang SP switched socket adds one USB-A and one USB-C charging port behind a polished brass screwless faceplate with a white insert. The single-pole switching breaks the live connection when the socket is turned off, while the USB ports remain powered for continuous device charging.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and light commercial installation, the socket fits a standard 25-35mm back box depending on wiring conditions and uses a screwless cover plate that clips onto a separate metal sub-frame. The built-in gasket around the edge of the plate sits flush to the wall once fitted, hiding any gaps between the socket and plaster. The 13A rating handles standard UK appliance loads up to 3,120W per outlet.\u003c\/p\u003e\n\u003cp\u003eThe polished brass finish provides a warm metallic surface that works well in traditional, classical and warm-toned contemporary interiors. The white insert behind the brass faceplate gives a clean contrast around each outlet aperture and matches white rocker switches in the same room. The dual USB ports share a 5V DC 4.0A output, allowing simultaneous charging of legacy USB-A devices and newer USB-C phones, tablets and accessories.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5743205_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 25mm back box depth is needed in straightforward wiring conditions. If multiple cables enter the box or if the ring main has thicker cable, a 35mm depth may be required to accommodate the wiring comfortably behind the socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe USB-A and USB-C ports share a combined output of 5V DC 4.0A. When both ports are in use, the 4.0A is shared between them. When only one device is connected, it receives the full output available from that port type.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The polished brass cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without disconnecting any wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between SP and DP switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSP (single-pole) switching breaks only the live connection when turned off, while DP (double-pole) switching isolates both live and neutral. For most residential use, SP switching is adequate. DP switching provides additional isolation for high-draw or sensitive appliances.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293693927691,"sku":"SFR9940PBW","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1540088_99f497fa-7be6-471c-864e-06aa180b6a6e.jpg?v=1714662720"},{"product_id":"13a-1-gang-sp-switched-socket-dual-usb-a-usb-c-antique-brass-black-insert","title":"13A 1 Gang SP Switched Socket Dual USB-A \u0026 USB-C - Antique Brass (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge CS9919AB is a 13A 1-gang single-pole switched socket with dual USB charging ports (one USB-A, one USB-C) supporting fast-charge protocols including PD and QC. The socket delivers up to 18W per port independently or 20W (5V DC, 4A) when both ports are used simultaneously. The antique brass faceplate with black insert fits standard 35mm minimum back box depth.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchens, offices, hotels and residential installation where mains power and device charging are needed at a single point, the socket combines a traditional 13A outlet with modern USB connectivity. The single-pole switching isolates the live line when the socket is switched off, and the USB ports remain independently powered for charging even when the mains outlet is switched off. The 89mm square faceplate uses a rounded edge profile that sits flush to the wall once fitted.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish provides a warm, aged metallic tone that pairs well with traditional, heritage and transitional interiors. The black insert behind the faceplate hides the back of the cover plate and defines the outlet apertures. Built-in protections against overload, overheating and excessive current draw are included, and the ErP-ready design limits standby energy consumption to regulatory thresholds. The Over Voltage Category III rating makes the socket suitable for both domestic and commercial installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e89 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e89 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e10.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFastcharge\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5815717_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 35mm minimum back box depth is needed for safe installation. The faceplate adds 10.5mm of projection from the wall once fitted. A 10mm spacer is provided with the socket for fitting flexibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB fast-charge output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach USB port delivers up to 18W independently. When both ports are used simultaneously, the combined output is 20W at 5V DC (4A shared). The ports support PD (Power Delivery) and QC (Quick Charge) fast-charge protocols.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the USB ports work when the mains socket is switched off?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The USB ports remain powered for charging even when the single-pole switch isolates the 13A mains outlet. This allows devices to charge overnight without leaving the mains outlet live.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this 1-gang socket with dual USB in a range of finishes including polished chrome, brushed chrome, polished brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293695861003,"sku":"CS9919AB","price":47.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1672748_539de207-993b-4fe4-95f1-a1a5d9d769de.jpg?v=1714662771"},{"product_id":"13a-2-gang-dp-switched-socket-dual-usb-a-usb-c-antique-brass-rounded-edge-black-insert","title":"13A 2 Gang DP Switched Socket Dual USB-A \u0026 USB-C - Antique Brass Rounded Edge (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang DP switched socket adds one USB-A and one USB-C fast charge port behind an antique brass rounded edge faceplate with a black insert. The USB-C port delivers up to 45W output and the USB-A delivers up to 18W, allowing simultaneous fast charging of two devices without needing plug-in adapters. The dual-pole switching isolates both live and neutral lines when the socket is switched off, providing additional safety over single-pole switching for high-draw appliances.\u003c\/p\u003e\n\u003cp\u003eDesigned for domestic, hospitality and commercial installation, the socket fits a standard 25mm minimum back box depth and uses a rounded edge faceplate that softens the profile against the wall compared to sharp-cornered plates. The black insert behind the brass faceplate hides the back of the cover plate and gives a defined edge to each outlet aperture. The 13A rating on each gang handles standard UK appliance loads up to 3,120W per outlet.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish provides a warm, aged metallic accent that pairs well with traditional, heritage and warm-toned contemporary interiors. The premium grade steel construction resists daily wear in high-traffic areas such as hotel rooms, restaurant seating areas and office hot-desking stations. The socket carries overload, overheat and over-current protection, with Over Voltage Category III compliance for use on standard UK mains supply. ErP certification confirms low standby power consumption when no devices are charging.\u003c\/p\u003e\n\u003cp\u003eThe adaptive voltage delivery on both USB ports adjusts output to match the connected device, optimising charge speed within the device's rated capacity. Fast charge protocols work most effectively on devices with battery levels between 0-70%, with charging speed tapering as the battery approaches full capacity. Certified USB cables are recommended for optimal performance.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e89 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e149.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e10.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFastcharge\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5815726_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation, with 35mm recommended where wiring conditions require more space for cable runs. The faceplate adds 10.5mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe USB-C port delivers up to 45W and the USB-A port delivers up to 18W. Both ports support adaptive voltage delivery, adjusting output to match the connected device's rated capacity and optimising charge speed within the device's safe limits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes fast charging work on all devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFast charge protocols work on devices that support USB Power Delivery (USB-C) or Quick Charge (USB-A). Devices without these protocols will charge at their standard rate. Fast charging is most effective when battery levels are between 0-70%, tapering as the battery approaches full capacity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this rounded edge style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293695959307,"sku":"CS9945AB","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1673432_f2f21d9f-6206-4969-8bd3-ea8d266965b0.jpg?v=1714662773"},{"product_id":"5a-round-pin-unswitched-socket-antique-brass-black-insert","title":"5A Round Pin Unswitched Socket - Antique Brass (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 5A round pin unswitched socket provides a dedicated outlet for lighting circuits behind an antique brass faceplate with a black insert. The 5A rating suits low-power fixed lighting installations where a switched socket would introduce unwanted control — the circuit is typically controlled by a wall switch elsewhere in the room.\u003c\/p\u003e\n\u003cp\u003eDesigned for bespoke lighting installations in residential, hospitality and heritage properties, the socket accepts 5A round pin plugs as specified in BS 546. These are distinct from standard 13A square-pin sockets and are used where lighting circuits need a dedicated outlet that cannot be accidentally overloaded by plugging in a high-draw appliance. The unswitched configuration means the socket is always live when the circuit breaker is on, making it suitable for table lamps, floor lamps and decorative lighting controlled by a separate wall switch or dimmer.\u003c\/p\u003e\n\u003cp\u003eThe square edge design sits flush with the wall surface once installed, with a built-in gasket that seals the gap between the faceplate and the mounting box to prevent dust ingress. The antique brass finish shows directional brushing with a warm, aged patina that pairs with traditional, classical and period interiors. The black insert behind the brass faceplate defines the socket aperture and hides the back of the cover plate. The premium-grade steel construction provides rigidity and durability across a 25-year warranty period.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e89 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e89 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e10.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2350226_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1283458.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a 5A round pin socket used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 5A round pin socket is designed for low-power lighting circuits where the load never exceeds 5A (approximately 1,150W at 230V). It prevents high-draw appliances being plugged in accidentally and is typically used for table lamps, floor lamps and decorative lighting in bespoke installations controlled by a separate wall switch or dimmer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is this socket unswitched?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unswitched design means the socket is always live when the circuit breaker is on. This suits installations where the lighting is controlled by a wall switch or dimmer located elsewhere in the room. Switching the socket itself would create a second control point, which can cause confusion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The faceplate projects approximately 10.5mm from the wall once fitted, giving a total depth of around 35.5mm from the back of the mounting box to the front face of the plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this square edge socket design in multiple finishes including polished chrome, brushed chrome, polished brass, satin brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293777649931,"sku":"CS5AAB","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1672716_48b7c98d-ba3a-47dd-9a4e-e072f3dd3e2f.jpg?v=1714663956"},{"product_id":"5a-unswitched-round-pin-socket-brushed-brass-black-insert-ultra-flat","title":"5A Unswitched Round Pin Socket - Brushed Brass (Black Insert) Ultra Flat","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge FP5ABB is a 5A unswitched round pin socket with a brushed brass faceplate and black insert, certified to BS 546. The ultra-flat plate design projects just 2.5mm from the wall surface once fitted, giving a minimal profile compared to standard UK sockets which typically project 8-12mm. The round pin configuration is designed for low-current lighting circuits, table lamps, and dedicated appliance feeds where the 5A rating is sufficient.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installation, the socket suits modern and period interiors where round pin sockets are specified for aesthetic or functional reasons. The unswitched configuration means the socket is always live when the circuit breaker is on, making it suitable for lamps and appliances that have their own on\/off controls. The built-in gasket behind the faceplate improves draught exclusion on external walls.\u003c\/p\u003e\n\u003cp\u003eThe brushed brass finish offers a warm metallic accent that pairs with traditional brass hardware, while the black insert behind the faceplate conceals the back of the plate and defines the aperture edges. The premium-grade steel construction provides durability, and the 25mm minimum back box depth requirement fits most standard UK mounting boxes. The socket carries a 25-year warranty from Knightsbridge.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1252389_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1285748.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a 5A round pin socket used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e5A round pin sockets are typically used for lighting circuits, table lamps, and low-current appliances where the 5A rating (up to 1,150W at 230V) is sufficient. They are common in period properties and are often specified where dedicated lamp circuits are installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this socket switched or unswitched?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis socket is unswitched, meaning it is always live when the circuit breaker is on. It suits appliances and lamps that have their own on\/off controls.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The ultra-flat plate adds just 2.5mm of projection from the wall surface once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces the Flat Plate range in multiple finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293819232523,"sku":"FP5ABB","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/104228_a254a673-060a-4275-9339-3648cce79738.jpg?v=1714664637"},{"product_id":"5a-unswitched-round-pin-socket-polished-brass-black-insert","title":"5A Unswitched Round Pin Socket - Polished Brass (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge FP5APB is a 5A unswitched round pin socket in polished brass with a black insert, designed for BS 546 3-pin round plug connections commonly used in custom lighting circuits. The socket has no on\/off switch — power is controlled at the circuit breaker or via a separate switched fused connection unit — making it suited to always-on or centrally-controlled lighting installations.\u003c\/p\u003e\n\u003cp\u003eThe ultra-flat plate design projects just 2.5mm from the wall, with a built-in gasket that seals against the mounting box to keep dust and debris out of the back box. This low-profile construction suits period properties, heritage restorations and modern interiors where minimal wall projection is required. The 87.5mm square faceplate fits standard 25mm minimum back boxes and the premium-grade steel construction gives a solid mechanical feel to the plug connection.\u003c\/p\u003e\n\u003cp\u003eThe polished brass finish provides a warm metallic accent that pairs well with traditional and classical interior schemes, whilst the black insert behind the faceplate hides the back of the cover plate and defines the socket apertures. The socket is rated IP20 for indoor dry location use and carries a 25-year warranty. The earth terminal is present and active, providing full grounding protection for connected appliances.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1328833_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1285782.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a 5A round pin socket used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e5A round pin sockets are typically used for custom lighting circuits where the load is controlled by a separate switch or dimmer. They accept BS 546 3-pin round plugs, which are common on vintage lamps, custom floor lamps and older British-made lighting equipment. The 5A rating handles loads up to approximately 1,150W at 230V.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is this socket unswitched?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket has no integral on\/off switch because the circuit is controlled elsewhere — either at the circuit breaker, via a wall switch, or through a switched fused connection unit feeding the socket. This configuration is standard for lighting circuits where the socket is intended to be permanently live when the circuit is energised.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 25mm back box depth is needed. The ultra-flat plate design adds only 2.5mm of projection from the wall, making the total installation depth approximately 27.5mm including the faceplate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used outdoors or in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The socket is rated IP20, which is suitable only for indoor dry locations. For bathrooms, kitchens and outdoor use, a higher IP-rated enclosure or alternative product is required.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293819756811,"sku":"FP5APB","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/104166_0142df11-1644-4fdc-9cd5-842c42a3fd12.jpg?v=1714664648"},{"product_id":"dual-voltage-shaver-socket-115v-230v-brushed-brass-flat-plate-black-insert","title":"Dual Voltage Shaver Socket 115V\/230V - Brushed Brass Flat Plate (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge dual voltage shaver socket provides both 115V and 230V AC outputs at 20VA behind a brushed brass flat plate with a black insert. The dual voltage configuration allows the socket to power UK 230V shavers and European\/US 115V grooming appliances without needing a separate transformer, making it suitable for households with imported equipment or guest bathrooms serving international visitors.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathroom installation zones 2 and 3, the socket carries an IP41 rating for protection against solid objects over 1mm and vertically falling water droplets. A built-in gasket between the faceplate and back box helps prevent moisture ingress around the perimeter. The flat plate construction projects just 2.5mm from the wall when fitted, creating a lower profile than standard faceplates and reducing the risk of catching on towels or clothing in narrow bathroom spaces.\u003c\/p\u003e\n\u003cp\u003eThe socket requires a minimum 47mm back box depth and fits standard UK mounting boxes. The brushed brass finish provides a warm metallic accent that pairs with traditional brass taps, radiator valves and heated towel rails, as well as with contemporary warm-toned interiors. The black insert behind the brass faceplate hides the back of the cover plate and provides contrast around the socket apertures. The unit is certified to EN 61558 for transformer safety and carries a 25-year manufacturer warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1325949_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1286402.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zones is this socket suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP41 rating makes this socket suitable for bathroom zones 2 and 3 (outside the immediate shower or bath enclosure area). It should not be installed in zone 0 (inside the bath or shower tray) or zone 1 (directly above the bath or shower to a height of 2.25m). Consult BS 7671 wiring regulations or a qualified electrician if unsure about zone placement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat appliances can it power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket provides both 115V and 230V outputs at 20VA, suitable for electric shavers, electric toothbrushes and small rechargeable trimmers. It is not designed for hairdryers, straighteners or other high-wattage appliances — those require a standard 13A socket outside bathroom zones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 47mm back box depth is needed for safe installation. The flat plate design adds just 2.5mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this flat plate shaver socket in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293833781515,"sku":"FP8900BB","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/104142_155449a2-1254-4c89-afc4-17ec0e9989f3.jpg?v=1714664796"},{"product_id":"115-230v-dual-voltage-shaver-socket-polished-brass-flat-plate-black-insert","title":"115\/230V Dual Voltage Shaver Socket - Polished Brass Flat Plate (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge dual voltage shaver socket provides 115VAC and 230VAC outlets at 20VA output, designed for electric shavers and toothbrushes in bathrooms and hotel guest rooms. The flat plate measures 147.5mm x 87.5mm with a 2.5mm projection from the wall, finished in polished brass with a black insert behind the outlet aperture. An IP41 rating protects against solid objects above 1mm and vertical dripping water.\u003c\/p\u003e\n\u003cp\u003eThe socket fits a standard 47mm minimum back box depth and uses a flat plate design rather than a screwless cover, giving a traditional aesthetic that pairs with both period and contemporary bathroom schemes. The dual voltage capability means both UK 230V and international 115V shavers can be plugged in without adapters, which matters in guest bathrooms, hotels, and homes with visitors from different regions.\u003c\/p\u003e\n\u003cp\u003eManufactured from premium-grade steel with a polished brass finish, the faceplate provides a warm metallic accent that coordinates with brass taps, cabinet handles and mirror frames. The black insert behind the brass plate frames the shaver outlet and hides the back of the cover plate. A rubber gasket between the plate and the wall surface contributes to the IP41 moisture protection by sealing the gap around the back box. The socket is certified to EN 61558 for isolating transformers used in bathrooms.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1325963_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1286420.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat devices can be plugged into this socket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket is designed for electric shavers and electric toothbrushes only. The 20VA output is insufficient for hairdryers, straighteners or other high-draw appliances. The outlet accepts both 115V and 230V shaver plugs without needing an adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP41 mean for bathroom use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP41 provides protection against solid objects larger than 1mm and vertically dripping water. This makes the socket suitable for bathroom zones outside the immediate shower or bath enclosure, typically Zone 2 or Zone 3 in UK bathroom wiring regulations. It is not suitable for direct spray or submersion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is needed for installation. The flat plate adds only 2.5mm of projection from the wall surface once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the polished brass finish lacquered?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge polished brass plates typically carry a protective lacquer to slow tarnishing. Over time in high-humidity environments, some patina may develop. The brass can be re-polished if desired, though this will remove the protective coating.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293834338571,"sku":"FP8900PB","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/103556_f97c3e34-27e2-4168-9399-1a912ddb819f.jpg?v=1714664809"},{"product_id":"13a-1-gang-dp-switched-socket-brushed-brass-black-insert-flat-plate","title":"13A 1 Gang DP Switched Socket - Brushed Brass (Black Insert) Flat Plate","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang DP switched socket features a brushed brass faceplate with a black insert and matching metal rocker, set on an ultra-flat 2.5mm profile plate. The double-pole switching isolates both live and neutral when turned off, providing additional safety for appliances that remain plugged in when not in use.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and hospitality installations where a low-profile fitting is needed, the flat plate sits only 2.5mm proud of the wall surface, reducing projection in rooms where flush-mounted switches and sockets are preferred. The socket fits a standard 25mm minimum back box depth and includes concealed fixings behind the faceplate, eliminating visible screws once installed. A built-in gasket creates a seal between the plate and the wall, preventing dust ingress behind the fitting.\u003c\/p\u003e\n\u003cp\u003eThe brushed brass finish is applied to premium-grade steel, providing a warm metallic accent that works in both traditional and contemporary interiors. The black insert sits behind the brass plate, framing the outlet aperture and creating contrast against the brushed metal surface. The metal rocker switch matches the brass finish and sits flush with the plate when in the 'on' position, maintaining the clean lines of the ultra-flat design.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2028269_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1286494.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does DP switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDP stands for double-pole. When the switch is turned off, it isolates both the live and neutral conductors, whereas a standard single-pole switch only isolates the live. This provides additional safety when appliances are left plugged in but not in use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The flat plate adds only 2.5mm of projection from the wall once fitted, making it one of the lowest-profile socket designs available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the fixings visible?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The flat plate uses concealed fixings behind the faceplate, so there are no visible screws or screw heads once the socket is installed. This gives a cleaner finish than traditional screw-fixed plates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in the flat plate range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces the flat plate range in multiple finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293835190539,"sku":"FPR7000BB","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/135050_95b80b76-1bda-42fd-9155-ffb037e65082.jpg?v=1714664824"},{"product_id":"13a-1-gang-dp-switched-socket-polished-brass-black-insert-flat-plate","title":"13A 1 Gang DP Switched Socket - Polished Brass (Black Insert) Flat Plate","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang DP switched socket pairs a polished brass flat plate with a black insert and matching brass rocker switch. The flat plate design projects just 2.5mm from the wall once installed, making it one of the lowest-profile socket options for walls where standard projection would interfere with furniture placement or create visual bulk.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and hospitality installation, the socket uses double-pole switching to isolate both live and neutral lines when switched off, providing additional safety over single-pole switching for high-draw appliances. The 13A rating handles standard UK loads up to 3,120W. The socket fits a 25mm minimum back box depth and includes a built-in gasket that sits flush to the wall surface, helping to seal the gap between plate and plasterwork.\u003c\/p\u003e\n\u003cp\u003eThe polished brass finish delivers a warm metallic accent that pairs well with traditional, classical and warm-toned contemporary interiors. The black insert behind the brass faceplate hides the back of the cover plate and gives a defined edge to the outlet aperture. Once a plug is inserted, the black recedes visually, leaving the polished brass as the dominant surface. The flat plate is fixed with visible brass screws at top and bottom, contributing to the heritage aesthetic while allowing the plate to be removed for redecorating.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2028274_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1286512.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The flat plate adds just 2.5mm of projection from the wall once fitted, making this one of the lowest-profile socket options available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does double-pole switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDouble-pole (DP) switching isolates both the live and neutral lines when the switch is in the off position, providing an additional layer of safety compared to single-pole switching which only breaks the live line. This is particularly useful for high-draw appliances.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The flat plate is fixed with two visible brass screws at top and bottom. The plate can be removed for painting around the socket and refitted without re-wiring, though you will need to isolate the circuit at the consumer unit before unscrewing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in the flat plate range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this flat plate style in a range of finishes including polished chrome, brushed chrome, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293836304651,"sku":"FPR7000PB","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/135054_1b0aa678-abf5-4e74-b6cb-e26e2be35e02.jpg?v=1714664837"},{"product_id":"13a-1-gang-unswitched-floor-socket-brushed-brass-white-insert","title":"13A 1 Gang Unswitched Floor Socket - Brushed Brass (White Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge 13A 1-gang unswitched floor socket features a spring-loaded brushed brass cover that conceals a single 13A outlet when not in use. The cover lifts open when a plug is inserted and springs shut when the plug is removed, protecting the socket from dust, debris and accidental contact in floor-level installations. The white insert behind the brass cover provides contrast and frames the outlet aperture.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial and residential floor installations including offices, hotels, conference rooms and open-plan living spaces, the socket fits a standard 35mm minimum back box depth recessed into the floor. The 30mm recessed depth and 3mm projection above floor level mean the closed socket sits nearly flush with the floor surface, reducing trip hazards in high-traffic areas. The unswitched configuration allows the outlet to remain permanently live, suited to floor positions where switching from the socket itself is not required.\u003c\/p\u003e\n\u003cp\u003eThe brushed brass finish is applied to premium-grade steel construction, providing a hardwearing surface that resists scuffing from foot traffic and wheeled furniture. The IP20 rating confirms protection against solid objects larger than 12.5mm, appropriate for internal dry-location floor use. The 13A rating handles standard UK appliance loads up to 3,120W, and the socket includes an earth terminal for safe grounding. Knightsbridge backs this floor socket with a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e94.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e86 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2028514_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1286540.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required for floor installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 35mm minimum back box depth is needed. The socket recesses 30mm into the floor and projects just 3mm above floor level when the spring-loaded cover is closed, reducing trip hazards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the spring-loaded cover work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brushed brass cover is held closed by an internal spring. When a plug is inserted, the cover lifts open. When the plug is removed, the spring pulls the cover shut automatically, protecting the socket from dust and debris.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this socket switched or unswitched?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is an unswitched socket, meaning the outlet remains permanently live. It is suited to floor positions where switching from the socket itself is not required, with control typically provided at a wall switch or consumer unit instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathrooms or wet areas?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating confirms protection against solid objects only, not moisture. This floor socket is designed for internal dry locations such as offices, hotel rooms and residential living spaces, not bathrooms or outdoor areas.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293836960011,"sku":"FPR7UBBW","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/126486_9e618630-d5ab-4b8e-b827-2b070e51ed83.jpg?v=1714664851"},{"product_id":"13a-1-gang-unswitched-floor-socket-polished-brass-white-insert","title":"13A 1 Gang Unswitched Floor Socket - Polished Brass (White Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang unswitched floor socket provides a recessed power outlet protected by a spring-loaded polished brass cover with a white insert. The cover sits almost flush with the floor surface when closed, projecting just 3mm, and lifts to reveal a standard 13A socket when pressure is applied. The spring mechanism returns the cover to the closed position automatically once the plug is removed, keeping dust and debris out of the socket aperture.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation into floors in hotel rooms, office meeting rooms, exhibition spaces and residential living areas where wall sockets are impractical, the socket recesses 30mm into the floor structure and requires a 35mm minimum back box depth. The IP20 rating makes it suitable for dry indoor environments only. The unswitched design means the socket remains live at all times when the circuit is energised, providing immediate power without needing to operate a switch before use.\u003c\/p\u003e\n\u003cp\u003eThe polished brass finish provides a warm metallic accent that pairs with traditional brass door furniture, light fittings and classical interiors. The white insert behind the brass cover provides contrast to define the socket aperture and reduce visual weight compared to a solid brass plate. The premium-grade steel construction resists wear from regular foot traffic and the 25-year warranty backs long-term reliability in commercial and residential settings.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e94.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e86 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2028542_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1286552.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat floor depth is needed for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket recesses 30mm into the floor and requires a 35mm minimum back box depth below the floor surface. This means a total floor void of at least 65mm is needed for safe installation. Consult a qualified electrician before cutting floor voids in timber or concrete floors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the socket always live or can it be switched off?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is an unswitched socket, meaning it remains live whenever the circuit is energised. The spring-loaded cover protects the outlet when not in use but does not isolate the power. If switched control is needed, install a separate isolator switch on the circuit or choose a switched floor socket model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathrooms or wet areas?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the socket is protected against solid objects larger than 12.5mm but has no protection against water ingress. It is suitable for dry indoor environments only and must not be installed in bathrooms, kitchens near sinks, or any location where water or cleaning fluids might enter the socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the spring-loaded cover work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eApply downward pressure to the brass cover and it lifts to reveal the socket aperture. Insert the plug, release the cover and it stays open while the plug is in place. Remove the plug and the spring mechanism automatically returns the cover to the closed position, keeping dust and debris out of the socket.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293837189387,"sku":"FPR7UPBW","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/126490_ea69863e-e0cb-4134-8ee0-833c84d4b0e9.jpg?v=1714664856"},{"product_id":"13a-2-gang-dp-switched-socket-twin-earths-brushed-brass-flat-plate-black-insert","title":"13A 2 Gang DP Switched Socket Twin Earths - Brushed Brass Flat Plate (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge FPR9000BB is a 13A 2-gang DP switched socket with twin earth terminals behind a brushed brass flat plate with a black insert. The flat plate design sits just 2.5mm proud of the wall surface, creating an ultra-low-profile installation that minimises projection and gives a clean, contemporary finish.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and commercial installation, the socket uses double-pole switching that isolates both live and neutral lines when switched off, providing additional safety over single-pole switching for high-draw appliances. The twin earth terminals provide increased security in multi-circuit installations and comply with BS 1363:2 British safety standards. The 13A rating handles standard UK appliance loads up to 3,120W per outlet.\u003c\/p\u003e\n\u003cp\u003eThe flat plate construction uses premium-grade steel with a brushed brass finish that shows a subtle linear grain texture, providing a warm metallic accent that pairs well with both traditional and contemporary interiors. The black insert behind the brass faceplate hides the back of the cover plate and defines the edge of each outlet aperture. The socket requires a standard 25mm minimum back box depth and includes an integrated gasket around the plate edge to prevent dust ingress behind the faceplate.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2028549_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1287562.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The flat plate adds only 2.5mm projection from the wall once fitted, making this one of the slimmest socket profiles available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does double-pole switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDouble-pole (DP) switching isolates both the live and neutral lines when the socket is switched off, rather than just the live line as in single-pole switches. This provides additional safety when disconnecting high-draw appliances like washing machines or tumble dryers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy twin earth terminals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwin earth terminals allow two separate earth cables to be connected to the same socket, which is useful in ring circuits or multi-circuit installations where the earth continuity needs to be maintained across multiple outlets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the flat plate differ from screwless plates?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFlat plates are fixed directly to the back box with visible screws on the faceplate (typically matching the finish). Screwless plates use a separate sub-frame to hide the fixings. Both styles are available in Knightsbridge's range — the flat plate offers a slimmer 2.5mm projection versus the screwless cover's thicker profile.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293838729483,"sku":"FPR9000BB","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122538_c4854c7f-3fc6-4f71-8360-c4239556fe74.jpg?v=1714664875"},{"product_id":"13a-2-gang-dp-switched-socket-twin-earths-polished-brass-flat-plate-black-insert","title":"13A 2 Gang DP Switched Socket Twin Earths - Polished Brass Flat Plate (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang DP switched socket provides two independently switched outlets with twin earth terminals behind a polished brass flat plate with black inserts. The double-pole switching isolates both live and neutral lines when switched off, offering additional safety over single-pole designs. Twin earth terminals allow separate earthing paths where required by installation standards or for equipment with specific earthing needs.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and office installation where visible fixings are unwanted, the flat plate sits almost flush to the wall with just 2.5mm projection once fitted to a standard 25mm back box. A built-in gasket seals the plate edge to the wall surface, giving a clean finish without visible gaps. The brass rockers match the faceplate finish, maintaining a consistent metal appearance across all visible elements.\u003c\/p\u003e\n\u003cp\u003eThe polished brass finish provides a warm metallic accent that pairs well with traditional brass door furniture, period lighting and warm-toned contemporary interiors. The black insert behind each outlet aperture defines the socket edges and hides the internal mechanism. Certified to BS 1363:2 standards, the socket carries a 13A rating per outlet and is backed by Knightsbridge's 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2028624_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1287576.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are twin earth terminals used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwin earth terminals provide two separate earthing connection points instead of the standard single earth. This is required in some installations where multiple earth paths are needed, or where earthing must be maintained independently for different circuits or equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The flat plate adds only 2.5mm projection from the wall once fitted, making this one of the lowest-profile sockets available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the flat plate fixed with screws?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The flat plate design uses visible fixing screws at each corner. These match the polished brass finish of the faceplate. If you need a screwless finish, see Knightsbridge's screwless ranges which use a separate sub-frame and clip-on cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this flat plate socket style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293840695563,"sku":"FPR9000PB","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122546_8ee0f0eb-2a1c-4d64-94d6-7f3c3d67b728.jpg?v=1714664888"},{"product_id":"13a-2-gang-unswitched-floor-socket-brushed-brass-white-insert","title":"13A 2 Gang Unswitched Floor Socket - Brushed Brass (White Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang unswitched floor socket provides two standard UK mains outlets through a recessed floor plate with a spring-loaded brushed brass cover and white insert. The socket sits flush with the floor surface when closed, with only a 3mm projection above floor level, and the spring mechanism holds the cover open at approximately 90 degrees when in use, preventing it from closing on plugs during connection.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation in office floors, hotel rooms, conference spaces and residential open-plan areas where permanent visible sockets would disrupt floor aesthetics, the socket requires a 35mm minimum back box depth recessed into a concrete or timber floor void. The 144mm x 94.5mm footprint fits standard underfloor trunking systems and the IP20 rating restricts use to dry interior locations away from water contact.\u003c\/p\u003e\n\u003cp\u003eThe brushed brass finish provides a warm metallic accent that pairs with both traditional and contemporary flooring materials including engineered wood, vinyl planks and polished concrete. The white insert behind the brass cover matches standard UK white socket surrounds and gives a clean contrast to the brass outer plate. The premium-grade steel construction withstands repeated foot traffic and the 25-year warranty covers manufacturing defects under normal use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e94.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e144 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2028687_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1287528.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat floor void depth is needed for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 35mm minimum back box depth is required below the finished floor surface, plus allowance for cable entry and termination. The socket itself has a 30mm recessed depth with only 3mm projecting above floor level when closed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathrooms or kitchens?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the socket has no protection against water ingress and must be installed only in dry interior areas away from sinks, basins, showers or other water sources.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cover stay open when plugs are inserted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The spring-loaded mechanism holds the brass cover open at approximately 90 degrees when raised, preventing it from closing on plugs during use. The cover closes automatically when released.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces floor sockets in a range of finishes including polished brass, polished chrome, brushed chrome, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293843546379,"sku":"FPR9UBBW","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/126494_ad708809-ef4a-4b3b-930d-69c54676ee58.jpg?v=1714664913"},{"product_id":"13a-2-gang-unswitched-floor-socket-polished-brass-white-insert","title":"13A 2 Gang Unswitched Floor Socket - Polished Brass (White Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang unswitched floor socket provides two 13A outlets recessed into floor level, protected by a spring-loaded polished brass cover with white insert. The socket sits flush with finished floor surfaces when closed, projecting just 3mm above floor level, with the outlets recessed 30mm below. The 35mm minimum back box depth requirement makes it compatible with standard underfloor void depths in raised access floors and concrete screeds.\u003c\/p\u003e\n\u003cp\u003eDesigned for hotel rooms, office floors, conference spaces and residential open-plan areas where wall sockets are too far from furniture clusters or workstations, the floor socket provides power access in the centre of rooms without trailing cables. The spring-loaded cover closes automatically when not in use, protecting the outlets from dust, liquid spills and foot traffic. The IP20 rating confirms suitability for dry interior areas only — this socket is not rated for bathrooms, kitchens or outdoor use.\u003c\/p\u003e\n\u003cp\u003eThe polished brass finish gives a warm metallic accent that pairs with traditional and classical interior schemes, while the white insert behind the brass cover provides a clean backing to each outlet aperture. The premium-grade steel construction handles repeated opening and closing cycles in commercial environments, and the 25-year warranty reflects Knightsbridge's confidence in the build quality. The unswitched design means both outlets remain permanently live when the circuit is energised — useful for floor positions where reaching down to operate switches would be awkward.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e94.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e144 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2028708_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1287534.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is needed for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 35mm back box depth is required. The socket projects just 3mm above floor level when closed, with the outlets recessed 30mm below the surface. This depth is compatible with most raised access floor systems and concrete floor screeds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in kitchens or bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means this socket is suitable for dry interior areas only. It is not rated for use in kitchens, bathrooms or any area where water or liquid spills are likely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cover stay open when in use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe spring-loaded cover opens when lifted and closes automatically when released. When plugs are inserted, the cover remains open against the spring tension, closing automatically once the plugs are removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this floor socket style in multiple finishes including polished chrome, brushed chrome, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293843611915,"sku":"FPR9UPBW","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/126498_359dc302-b2c4-4735-8864-2dad2d4aea23.jpg?v=1714664919"},{"product_id":"dual-voltage-shaver-socket-115v-230v-polished-brass-screwless-black-insert","title":"Dual Voltage Shaver Socket 115V\/230V - Polished Brass Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge dual voltage shaver socket provides both 115V and 230V outputs at 20VA, accommodating UK and international shavers and electric toothbrushes behind a polished brass screwless faceplate with a black insert. The IP41 rating confirms protection against solid objects over 1mm and vertically dripping water, making it suitable for bathroom installation in zones 2 and 3.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential bathrooms, hotel ensuites and washrooms where users may carry devices from different voltage regions, the socket switches automatically between 115V and 230V depending on the device plugged in. The screwless cover plate clips onto a separate metal sub-frame fixed to the back box, eliminating visible screw fixings on the wall once installed. A 47mm minimum back box depth is required, and the socket requires an earth connection under Class I wiring.\u003c\/p\u003e\n\u003cp\u003eThe polished brass finish provides a warm metallic accent that pairs well with traditional bathroom fittings, brass taps and warm-toned tiles. The black insert behind the brass faceplate hides the back of the cover plate and gives a defined edge to the outlet aperture. The premium-grade steel construction and built-in gasket provide resilience against bathroom moisture and steam over the socket's 25-year warranty period, certified to EN 61558 for isolating transformer safety.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e43.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1191728_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292288.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between 115V and 230V output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket automatically switches between 115V and 230V depending on the device plugged in. UK shavers typically run on 230V, while some international shavers and older models use 115V. The 20VA rating limits the maximum power draw, making the socket suitable for shavers and electric toothbrushes but not for hairdryers or other high-power appliances.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be installed in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP41 rating confirms protection against moisture and the socket is designed for bathroom installation in zones 2 and 3. It must not be installed in zone 0 or zone 1 (inside the bath or shower enclosure, or directly above the bath to a height of 2.25m).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is needed for safe installation. The screwless cover plate adds approximately 4mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for tiling or painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293947814155,"sku":"SF8900PB","price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/100786_379da269-ff84-4c27-a095-c9cf39e5a3b5.jpg?v=1714666622"},{"product_id":"dual-voltage-shaver-socket-115v-230v-polished-brass-screwless-white-insert","title":"Dual Voltage Shaver Socket 115V\/230V - Polished Brass Screwless (White Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge dual voltage shaver socket provides 115V and 230V outputs at 20VA behind a polished brass screwless faceplate with a white centre insert. The socket accepts both two-pin UK and European-style shaver plugs through the dual voltage transformer, making it suitable for households with shavers from different regions or guest bathrooms accommodating international visitors.\u003c\/p\u003e\n\u003cp\u003eRated IP41 for bathroom installation, the socket includes an internal gasket to protect against water droplets and steam from showers and baths. The screwless cover plate clips onto a separate metal sub-frame, leaving no visible fixings on the wall once installed. The socket fits a standard 47mm minimum back box depth and sits 4.3mm proud of the wall when fitted, creating a low-profile finish that works in bathrooms with limited space around basins and mirrors.\u003c\/p\u003e\n\u003cp\u003eThe polished brass finish provides a warm metallic accent that pairs with traditional brass taps, heated towel rails and period-style bathroom fittings, while the white centre insert gives a clean contrast and hides the back of the cover plate. The premium-grade steel construction and EN 61558 certification confirm the transformer meets safety standards for bathroom electrical fittings. Knightsbridge backs the socket with a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e43.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1201425_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292290.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat voltages does this socket support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket provides both 115V and 230V outputs at 20VA through a built-in transformer. This allows it to accept shaver plugs from UK appliances (230V) and North American or older European appliances (115V) without needing a separate travel adaptor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for use in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The socket carries an IP41 rating, meaning it resists water droplets and steam from normal bathroom use. The internal gasket provides additional protection. It must be installed in accordance with UK wiring regulations for bathroom zones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 47mm back box depth is needed. The socket has a recessed depth of 43.4mm and projects just 4.3mm from the wall once the screwless cover plate is fitted, making it suitable for installation where wall depth is limited.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the screwless plate be removed for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The polished brass cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed to paint or tile around the socket and re-clipped afterwards without disturbing the wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293947846923,"sku":"SF8900PBW","price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/105742_22a3f7ed-6ade-4dad-83d5-bf6bbad51e50.jpg?v=1714666624"},{"product_id":"13a-1-gang-dp-switched-socket-polished-brass-screwless-black-insert","title":"13A 1 Gang DP Switched Socket - Polished Brass Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang DP switched socket features a polished brass screwless faceplate with a black insert and matching polished brass rocker switch. The dual-pole switching isolates both live and neutral lines when the socket is switched off, providing additional safety over single-pole switching for high-draw appliances.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and light commercial installation, the socket fits a standard 25mm minimum back box depth and uses a screwless cover plate that clips onto a separate metal sub-frame. This means there are no visible screws or fixings on the wall once installed, giving a cleaner finish than traditional screw-fixed plates. The 13A rating handles standard UK appliance loads up to 3,120W per outlet.\u003c\/p\u003e\n\u003cp\u003eThe polished brass finish provides a warm metallic accent that pairs well with traditional, classical and warm-toned contemporary interiors. The black insert behind the brass faceplate hides the back of the cover plate and gives a defined edge to the outlet aperture. At 4.3mm projection from the wall, the ultra-flat design sits almost flush with the mounting surface, reducing the visual bulk of the fitting.\u003c\/p\u003e\n\u003cp\u003ePremium-grade steel construction with twin earth terminals allows for straightforward wiring. The integrated gasket helps maintain a tight seal between the faceplate and the wall, preventing dust ingress and keeping the installation looking clean over time. Certified to BS 1363:2 and backed by a 25-year warranty from Knightsbridge.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1792431_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292916.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The screwless cover plate adds approximately 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does DP (double pole) switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDP switching isolates both the live and neutral lines when the socket is switched off, rather than just the live line as in single-pole switches. This provides an extra safety margin for appliances that draw high current or remain plugged in when not in use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293950370059,"sku":"SFR7000PB","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/118428_5980d8e5-29f9-44bb-a5e5-6e112203fa96.jpg?v=1714666660"},{"product_id":"13a-1-gang-dp-switched-socket-polished-brass-white-insert-screwless","title":"13A 1 Gang DP Switched Socket - Polished Brass (White Insert) Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang DP switched socket combines a polished brass screwless faceplate with a white insert behind the outlet aperture. The double-pole switch isolates both live and neutral lines when the socket is switched off, providing additional safety over single-pole switching for high-draw appliances.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and office installation, the socket fits a standard 25mm minimum back box depth and uses a screwless cover plate that clips onto a separate metal sub-frame. This means there are no visible screws or fixings on the wall once installed, giving a cleaner finish than traditional screw-fixed plates. The 13A rating handles standard UK appliance loads up to 3,120W per outlet.\u003c\/p\u003e\n\u003cp\u003eThe polished brass finish provides a warm metallic accent that pairs well with traditional, classical and warm-toned contemporary interiors. The white insert behind the brass faceplate hides the back of the cover plate and gives a defined edge to the outlet aperture. At 4.3mm projection from the wall, the ultra-flat profile sits close to the surface without protruding into the room space. The plate measures 87.5mm square and carries an IP20 rating for dry indoor use.\u003c\/p\u003e\n\u003cp\u003eConstructed from premium-grade steel with a polished brass coating, the socket includes twin earth terminals for flexible wiring configurations and carries BS 1363:2 certification. Knightsbridge backs the socket with a 25-year warranty, covering material and manufacturing defects over the life of the installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1792432_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The screwless cover plate adds approximately 4.3mm of projection from the wall once fitted, making this one of the lowest-profile sockets in the Knightsbridge range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the 25-year warranty cover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe warranty covers material and manufacturing defects over the life of the installation. It does not cover damage from misuse, incorrect installation, or normal wear to the polished finish over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293950763275,"sku":"SFR7000PBW","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/118430_a165619a-3aca-4c1d-b4cc-e9c9e1233c3b.jpg?v=1714666663"},{"product_id":"13a-2-gang-dp-switched-socket-twin-earths-polished-brass-screwless-black-insert","title":"13A 2 Gang DP Switched Socket Twin Earths - Polished Brass Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang DP switched socket adds twin earth terminals behind a polished brass screwless faceplate with a black insert. The dual-pole switching isolates both live and neutral lines when the socket is switched off, providing additional safety over single-pole switching for high-draw appliances. The twin earth terminals support high-integrity earthing where additional earth bonding is required in installations.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and office installation, the socket fits a standard 25mm minimum back box depth and uses a screwless cover plate that clips onto a separate metal sub-frame. This means there are no visible screws or fixings on the wall once installed, giving a cleaner finish than traditional screw-fixed plates. The 13A rating handles standard UK appliance loads up to 3,120W per outlet. The socket is certified to BS 1363:2 standards.\u003c\/p\u003e\n\u003cp\u003eThe polished brass finish provides a warm metallic accent that pairs well with traditional, classical and warm-toned contemporary interiors. The black insert behind the brass faceplate hides the back of the cover plate and gives a defined edge to each outlet aperture. The matching brass rocker switches sit flush with the faceplate surface when fitted. The plate measures 147.5mm wide by 87.5mm high with a 4.3mm projection from the wall once installed, and is constructed from premium grade steel.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1792458_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1293324.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The screwless cover plate adds approximately 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are twin earth terminals used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwin earth terminals provide two separate earth connections instead of the standard single earth terminal. This supports high-integrity earthing in installations where additional earth bonding is required, or where multiple earth connections need to be made at the socket location.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293953417483,"sku":"SFR9000PB","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/116784_5de64979-2542-4362-98b5-ba9567ba2db8.jpg?v=1714666700"},{"product_id":"13a-2-gang-dp-switched-socket-twin-earths-polished-brass-screwless-white-insert","title":"13A 2 Gang DP Switched Socket Twin Earths - Polished Brass Screwless (White Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang DP switched socket features twin earth terminals behind a polished brass screwless faceplate with a white insert. The dual-pole switching isolates both live and neutral lines when the socket is switched off, providing additional safety over single-pole switching for high-draw appliances. The twin earth terminals support high-integrity earthing setups where a supplementary earth connection is required alongside the standard ring-main earth.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and commercial installation, the socket fits a standard 25mm minimum back box depth and uses a screwless cover plate that clips onto a separate metal sub-frame. This means there are no visible screws or fixings on the wall once installed, giving a cleaner finish than traditional screw-fixed plates. The 13A rating handles standard UK appliance loads up to 3,120W per outlet. The built-in gasket between the faceplate and the wall improves dust resistance at the IP20 rating.\u003c\/p\u003e\n\u003cp\u003eThe polished brass finish provides a warm metallic accent that pairs well with traditional, classical and warm-toned contemporary interiors. The white insert behind the brass faceplate hides the back of the cover plate and gives a defined edge to each outlet aperture. The metal rockers match the brass finish for visual consistency. The premium-grade steel construction is backed by Knightsbridge's 25-year warranty and meets BS 1363:2 certification standards for UK mains sockets.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1792459_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1293332.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are twin earth terminals and when are they needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwin earth terminals provide two separate earth connection points instead of one. They're required in high-integrity earthing setups where a supplementary earth connection runs alongside the standard ring-main earth, common in medical facilities, laboratories and some commercial installations. For standard domestic wiring, one earth terminal is sufficient.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293953450251,"sku":"SFR9000PBW","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/116786_1a986c66-dc77-4c0c-b48d-9e0189081ae5.jpg?v=1714666703"},{"product_id":"13a-1-gang-switched-socket-with-quad-usb-polished-brass-screwless-black-insert","title":"13A 1 Gang Switched Socket with Quad USB - Polished Brass Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang switched socket integrates four USB charging ports behind a polished brass screwless faceplate with a black insert. The socket provides a single 13A outlet for mains appliances, while the USB array delivers a shared 5V DC 5.1A output split across four ports: one dedicated 2.1A port for tablets or high-draw devices, and three ports sharing 3A for phones, earbuds and smaller accessories.\u003c\/p\u003e\n\u003cp\u003eDesigned for bedrooms, hotel rooms, co-working desks and kitchen worktops where multiple devices need charging without occupying the mains outlet, the quad USB layout allows four simultaneous connections while the 13A socket remains available for a kettle, lamp or laptop charger. The screwless cover plate clips onto a separate metal sub-frame, hiding all fixings once installed and giving a cleaner wall finish than screw-fixed alternatives.\u003c\/p\u003e\n\u003cp\u003eThe 201 stainless steel faceplate is finished in polished brass with a protective lacquer that resists tarnishing under normal indoor use. The black insert behind the brass plate defines each outlet aperture and hides the back of the cover. The socket is BS1363-2 certified and EMC\/ErP compliant, and includes a gasket for secure flush mounting against plasterboard or masonry. A 25-35mm minimum back box depth is required depending on cable entry and termination space.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e30.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e9.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e20.8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate Depth\u003c\/td\u003e\n\u003ctd\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e201 Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-SFR7USB4PB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the 5.1A USB output split across the four ports?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne port is dedicated 2.1A for tablets or larger devices. The remaining three ports share 3A between them, suitable for phones, earbuds, smartwatches and similar accessories. The total USB output across all four ports is capped at 5.1A.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan all four USB ports be used while the 13A socket is in use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The USB charging circuit and the 13A mains socket operate independently, so you can charge four devices via USB and still power a mains appliance through the switched outlet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 25mm back box depth is required for basic installations. In tight wiring conditions or where cables enter from the side, a 35mm back box may be necessary to accommodate terminations behind the socket mechanism.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The polished brass cover plate clips onto a metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391539216651,"sku":"SFR7USB4PB","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/116766_edca9d38-da6e-4ff4-9ddd-f37ca40b86a1.jpg?v=1747069320"},{"product_id":"13a-1-gang-sp-switched-socket-dual-usb-brushed-brass-black-insert","title":"13A 1 Gang SP Switched Socket Dual USB - Brushed Brass (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang SP switched socket adds two USB-A charging ports alongside a single 13A outlet, behind a brushed brass faceplate with black insert. The dual USB-A ports share a combined 5V DC 2.1A output, allowing two devices to charge simultaneously at standard USB speed. The single-pole switch isolates the live line when switched off, controlling power to the 13A outlet only — the USB ports remain active.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and office installation, the socket fits standard UK 35mm back boxes and uses Knightsbridge's Flat Plate range design with an ultra-low 7.8mm wall projection. The metal faceplate sits flush with minimal gap between plate and wall, giving a cleaner line than traditional raised faceplates. The 13A outlet handles standard UK appliance loads up to 2,990W, while the USB ports charge phones, tablets, battery packs and other small devices without needing a separate wall adapter.\u003c\/p\u003e\n\u003cp\u003eThe brushed brass finish provides a warm metallic accent that pairs with traditional, classical and warm-toned contemporary interiors. The black insert behind the faceplate hides the back of the cover and defines each outlet aperture. The 201 stainless steel construction with a 2.5mm plate thickness gives the socket a solid feel under finger pressure, and the brushed finish resists fingerprints better than polished brass.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e34.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e26.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mmmm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate Depth\u003c\/td\u003e\n\u003ctd\u003e2.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e201 Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-FPR9901BCG.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 35mm minimum back box depth is needed for safe installation. The Flat Plate design projects only 7.8mm from the wall once fitted, giving a low-profile finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dual USB-A ports provide a shared 5V DC 2.1A output. When two devices are connected, the 2.1A is split between them. For optimal charging speed, use certified USB cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the switch control the USB ports?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The single-pole switch controls power to the 13A outlet only. The USB ports remain active at all times when the socket is wired to mains, allowing devices to charge even when the switch is off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces the Flat Plate range in polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters at Niori to find other variants in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391546032395,"sku":"FPR9901BCG","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128322_939c7b4e-66b9-43f4-a114-b6e64bfb3922.jpg?v=1747069181"},{"product_id":"13a-2-gang-dp-switched-socket-dual-usb-c-fast-charge-antique-brass","title":"13A 2 Gang DP Switched Socket Dual USB-C Fast Charge - Antique Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge 13A 2-gang DP switched socket adds two USB-C fast charge ports behind an antique brass square edge faceplate. The USB-C ports support USB Power Delivery (USB-PD) and Programmable Power Supply (PPS) standards, delivering up to 65W combined output — enough to charge laptops, tablets and phones directly from the wall without a separate adapter. The dual-pole switching isolates both live and neutral lines when the socket is switched off.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and office installation where device charging is a daily requirement, the socket fits a standard 25mm minimum back box depth. The square edge faceplate provides a contemporary angular profile that sits flush with the wall surface, with the antique brass finish adding warmth to modern, traditional and transitional interiors. The 13A rating on each outlet handles standard UK appliance loads up to 3,120W.\u003c\/p\u003e\n\u003cp\u003eThe two USB-C ports share the 65W output dynamically: when one device is connected it receives up to 45W, and when two devices are connected the power splits 45W + 18W depending on the charging protocol each device requests. This allows a laptop to fast-charge on one port while a phone charges simultaneously on the other. The socket includes built-in overload, overheat and surge protection to prevent damage to connected devices during voltage spikes or faults.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish is applied to 430 stainless steel, giving the faceplate durability and corrosion resistance while maintaining the warm aged brass aesthetic. The square edge design has no rounded corners or bevels, creating clean lines that suit contemporary architecture and minimalist interiors. Knightsbridge specifies that only certified 100W USB-C cables should be used with the fast charge ports to ensure safe operation at high wattages.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e89mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e149.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e34.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e10.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e18.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mmmm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate Depth\u003c\/td\u003e\n\u003ctd\u003e10.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e430 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFastcharge\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eCaptive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-CS9965AB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum wattage the USB-C ports can deliver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe two USB-C ports share a combined 65W output. When one device is connected it receives up to 45W. When two devices are connected simultaneously, the power splits dynamically to 45W + 18W depending on what each device requests via the USB-PD protocol.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this charge a laptop?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 45W output on a single port is sufficient to charge most laptops that use USB-C charging, including MacBooks, Dell XPS, Lenovo ThinkPad and HP Spectre models. Check your laptop's wattage requirement before relying on this as the primary charger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The faceplate projects 10.5mm from the wall surface once fitted, with 18.5mm recessed behind the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 'square edge' mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSquare edge refers to the angular profile of the faceplate with no rounded corners or bevelled edges. This creates clean, straight lines that suit contemporary and minimalist interiors.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391625986315,"sku":"CS9965AB","price":69.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1982904_4fd9a943-a626-4b79-9980-7395cd017d19.jpg?v=1747069264"},{"product_id":"dual-voltage-shaver-socket-115v-230v-antique-brass-screwless","title":"Dual Voltage Shaver Socket 115V\/230V - Antique Brass Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SF8900AB is a dual voltage shaver socket with separate 115V and 230V outlets rated at 20VA, housed behind an antique brass screwless faceplate. The socket carries an IP41 rating, making it suitable for bathroom installation in zones where water spray is indirect. The dual voltage configuration allows the same socket to power both UK 230V shavers and older 115V models or imported appliances.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathroom installation at mirror height, the socket fits above washbasins in residential, hotel and leisure facilities where shaver and electric toothbrush charging is required. The screwless cover plate clips onto a separate metal sub-frame fixed to the back box, removing visible fixings from the wall surface. The built-in gasket between the faceplate and wall provides additional moisture resistance. A minimum 47mm back box depth is required for safe installation.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish is brushed and lightly aged to give a warm, muted metallic tone that pairs with traditional brass taps, handles and bathroom fittings. The stainless steel construction beneath the finish provides corrosion resistance in humid bathroom environments. The socket is certified to EN 61558 for shaver supply units and carries Knightsbridge's 25-year guarantee.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e147.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e47.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e43.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mmmm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate Depth\u003c\/td\u003e\n\u003ctd\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e201 Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e110\/230V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-SF8900AB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does dual voltage mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket provides two separate outlets: one rated at 115V and one at 230V, both at 20VA. This allows it to power both UK 230V shavers and older or imported 115V models from the same fitting without needing a separate transformer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat IP rating does it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP41. This means the socket is protected against solid objects larger than 1mm and against vertically dripping water when tilted up to 15 degrees. It is suitable for bathroom installation where direct water spray does not reach the socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 47mm back box depth is needed. The socket requires 43.4mm recessed depth, and the cover plate adds 4.3mm projection from the wall once installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The antique brass cover plate clips onto a separate metal sub-frame that is fixed to the back box. The cover can be removed for redecorating or cleaning and re-clipped without re-wiring the socket.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391648792843,"sku":"SF8900AB","price":25.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1949466_65388c20-b175-47c2-8550-7e576031b563.jpg?v=1747063132"},{"product_id":"230v-shaver-socket-with-dual-usb-a-usb-c-antique-brass-screwless","title":"230V Shaver Socket With Dual USB-A \u0026 USB-C - Antique Brass Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SF8909AB is a 230V 20VA shaver socket with one USB-A and one USB-C charging port, housed behind an antique brass screwless faceplate with a black insert. The socket is certified to EN 61558 and carries an IP41 rating, protecting against solid objects above 1mm and vertically falling water droplets, making it suitable for bathroom zones 2 and 3 in UK installations.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathroom installation alongside mirrors or vanity units, the socket provides a dedicated 230V shaver supply plus 5V DC charging for USB devices at a shared 2.4A output across both ports. The screwless cover plate clips onto a separate metal sub-frame fixed to the back box, giving a clean finish with no visible screws or fixings on the wall once installed. A built-in gasket sits between the faceplate and the wall to prevent moisture ingress behind the plate.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish is applied to 201 stainless steel, giving a warm bronze tone with darker patina in the recesses of the brushed surface. This pairs well with traditional brass tapware, aged brass towel rails, and warm-toned bathroom schemes. The faceplate projects 4.3mm from the wall, making it one of the slimmer profiles in the Knightsbridge range and reducing the risk of catches on towels or bathrobes in tight spaces.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e147.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e47.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e43.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate Depth\u003c\/td\u003e\n\u003ctd\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e201 Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-SF8909AB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zones can this socket be installed in?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP41 rating allows installation in bathroom zones 2 and 3 — at least 600mm from a bath or shower edge. It cannot be installed in zones 0 or 1 (inside the bath\/shower enclosure or directly above them). Always confirm zone classification with a qualified electrician before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket provides 5V DC at a shared 2.4A output across both the USB-A and USB-C ports. If both ports are in use simultaneously, the total draw is limited to 2.4A combined, not 2.4A per port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 47mm back box depth is required for safe installation. The socket sits 43.4mm into the box with 4.3mm projecting from the wall once the screwless cover plate is fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used with 110V shavers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a single-voltage 230V shaver socket only. It will not step down voltage for 110V shavers. Check your shaver's voltage rating before use — most modern shavers are dual-voltage (110-240V) and will work safely with this socket.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391649120523,"sku":"SF8909AB","price":49.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1949462_02a60f9f-8f9e-4934-8dde-b940d2cc2cb9.jpg?v=1747069686"},{"product_id":"5a-unswitched-round-pin-socket-antique-brass-screwless","title":"5A Unswitched Round Pin Socket - Antique Brass Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 5A unswitched round pin socket provides a single outlet for lighting circuits or low-power appliances behind an antique brass screwless faceplate. The round pin configuration follows BS 546 rather than the standard 13A rectangular-pin format, making this socket specific to lighting installations or older circuit wiring where 5A round pins are required by the existing infrastructure.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and period restoration work where lighting control is handled separately by a switch elsewhere in the circuit, the socket has no on\/off switch of its own. The screwless cover plate clips onto a metal sub-frame fixed to the back box, concealing all fixings behind the faceplate once installed. The antique brass finish is a warm, aged metallic tone with darker patina that pairs with traditional, heritage and classical interiors.\u003c\/p\u003e\n\u003cp\u003eThe 201 stainless steel construction provides corrosion resistance while the 4.3mm projection from the wall keeps the socket profile low against the surface. The built-in gasket between the faceplate and the wall prevents dust ingress during installation and provides a clean flush seal once fitted. The 25mm minimum back box depth requirement is compatible with standard UK mounting boxes.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\" style=\"width: 100.036%; height: 254.8px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 57.1592%; height: 19.6px;\"\u003eHeight\u003c\/td\u003e\n\u003ctd style=\"width: 40.3811%; height: 19.6px;\"\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 57.1592%; height: 19.6px;\"\u003eWidth\u003c\/td\u003e\n\u003ctd style=\"width: 40.3811%; height: 19.6px;\"\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 57.1592%; height: 19.6px;\"\u003eDepth\u003c\/td\u003e\n\u003ctd style=\"width: 40.3811%; height: 19.6px;\"\u003e23.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 57.1592%; height: 19.6px;\"\u003eProjection\u003c\/td\u003e\n\u003ctd style=\"width: 40.3811%; height: 19.6px;\"\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 57.1592%; height: 19.6px;\"\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd style=\"width: 40.3811%; height: 19.6px;\"\u003e19.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 57.1592%; height: 19.6px;\"\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd style=\"width: 40.3811%; height: 19.6px;\"\u003e25mmmm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 57.1592%; height: 19.6px;\"\u003ePlate Depth\u003c\/td\u003e\n\u003ctd style=\"width: 40.3811%; height: 19.6px;\"\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 57.1592%; height: 19.6px;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"width: 40.3811%; height: 19.6px;\"\u003e201 Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 57.1592%; height: 19.6px;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"width: 40.3811%; height: 19.6px;\"\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 57.1592%; height: 19.6px;\"\u003eIP Rating\u003c\/td\u003e\n\u003ctd style=\"width: 40.3811%; height: 19.6px;\"\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 57.1592%; height: 19.6px;\"\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 40.3811%; height: 19.6px;\"\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 57.1592%; height: 19.6px;\"\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd style=\"width: 40.3811%; height: 19.6px;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 57.1592%; height: 19.6px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"width: 40.3811%; height: 19.6px;\"\u003e25 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-SF5AAB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a 5A round pin socket used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e5A round pin sockets are primarily used in lighting circuits where the socket itself is controlled by a separate wall switch elsewhere in the circuit. They also appear in older properties where the wiring infrastructure was designed around BS 546 round pin sockets rather than the modern 13A rectangular pin standard. The 5A rating limits the socket to low-power appliances drawing up to 1,150W on 230V mains.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is this socket unswitched?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn a typical lighting installation, the socket is controlled by a wall switch elsewhere on the circuit that isolates the supply before it reaches the socket. Adding a switch at the socket itself would be redundant. The unswitched design also keeps the faceplate cleaner and simpler in appearance, which suits period interiors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.3mm of projection from the wall once fitted, giving a total installed depth of approximately 29mm from the finished wall surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The antique brass cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without needing to re-wire the socket itself.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391651152139,"sku":"SF5AAB","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1939964_e86a28a8-7603-49b5-8c95-d80545ca49dd.jpg?v=1747063163"},{"product_id":"13a-1-gang-dp-switched-socket-antique-brass-screwless","title":"13A 1 Gang DP Switched Socket - Antique Brass Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang DP switched socket features a screwless antique brass faceplate made from 201 stainless steel with a brushed antique brass finish. The double-pole switch isolates both live and neutral lines when turned off, providing additional safety over single-pole switching for high-draw appliances. The socket insert sits behind the metal plate and is concealed once a plug is inserted, creating a cleaner visual than traditional faceplates where the insert remains visible.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and hospitality installation, the socket suits bedrooms, living rooms, kitchens and offices where the warmer tones of antique brass complement traditional, country-house and warm-toned contemporary interiors. The 87.5mm square faceplate fits a standard 25mm minimum back box depth and uses a screwless cover plate that clips onto a separate metal sub-frame, meaning there are no visible screws or fixings on the wall once installed. The integrated gasket between the plate and the wall creates a flush fit that minimises dust ingress.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish provides a warm metallic accent that develops a deeper patina over time, particularly where the plate is handled frequently. The 201 stainless steel construction gives corrosion resistance and durability, with a 4.3mm plate thickness that resists warping during installation. The 13A rating handles standard UK appliance loads up to 3,120W. Knightsbridge backs this socket with a 25-year guarantee and BS 1363-2 certification for mains wiring compatibility.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e31.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e9.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e22.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate Depth\u003c\/td\u003e\n\u003ctd\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e201 Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-SFR7000AB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The total depth from the wall surface including the screwless cover plate is 31.7mm, with 9.4mm projecting from the wall and 22.3mm recessed into the back box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The antique brass cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring. The integrated gasket ensures a flush fit when refitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does double-pole switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDouble-pole (DP) switching isolates both the live and neutral conductors when the switch is turned off, rather than just the live conductor. This provides additional safety when disconnecting high-draw appliances or when isolating a circuit for maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the antique brass finish tarnish?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAntique brass develops a deeper patina over time, particularly where the plate is handled frequently. This is a characteristic of the finish. The 201 stainless steel base provides corrosion resistance, and the brass finish can be cleaned gently with a dry microfibre cloth to maintain its appearance.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391652266251,"sku":"SFR7000AB","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1940900_8a3dbacd-3bff-42af-8982-823dfbbe1e37.jpg?v=1747069173"},{"product_id":"13a-1-gang-unswitched-socket-antique-brass-screwless","title":"13A 1 Gang Unswitched Socket - Antique Brass Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang unswitched socket provides fixed, always-on power behind an antique brass screwless faceplate with a black insert. The unswitched design eliminates the rocker switch, giving a completely flush front surface with no moving parts. The socket is rated to 13A on 230V mains and certified to BS 1363-2 for UK residential and commercial use.\u003c\/p\u003e\n\u003cp\u003eDesigned for appliances that need permanent power access without switching, such as TV backboards, kitchen appliance circuits where the appliance has its own switch, or in utility rooms where the power to washing machines or dryers is controlled elsewhere. The screwless cover plate clips onto a separate metal sub-frame, hiding all fixings and providing a clean, minimal finish once installed. The socket requires a standard 25mm minimum back box depth.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish is a darker, warmer tone than polished brass, with a low-sheen patina that suits traditional, period and heritage interiors. The black insert behind the faceplate hides the back of the cover plate and defines the socket aperture. The 201 stainless steel construction provides corrosion resistance and durability, backed by a 25-year manufacturer warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e25.9mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e21.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mmmm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate Depth\u003c\/td\u003e\n\u003ctd\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e201 Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-SFR7000UAB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between switched and unswitched sockets?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn unswitched socket provides permanent power whenever the circuit is live, with no rocker switch to isolate the outlet. This suits appliances that have their own power switch or need constant power, such as TVs, AV equipment and some kitchen appliances. A switched socket allows you to cut power at the wall without unplugging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is required. The socket has a total depth of 25.9mm, with 21.6mm recessed into the wall and 4.3mm projecting from the wall surface once the screwless plate is fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The antique brass cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for redecorating and re-clipped without rewiring or removing the socket mechanism.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this style in polished chrome, brushed chrome, polished brass, matt black, white and other finishes. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391652626699,"sku":"SFR7000UAB","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1940898_06146cf0-471e-4dd5-b4df-3c29afdc824d.jpg?v=1747069228"},{"product_id":"13a-2-gang-dp-switched-socket-antique-brass-screwless","title":"13A 2 Gang DP Switched Socket - Antique Brass Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang DP switched socket features an antique brass screwless faceplate with black socket inserts that hide when a plug is inserted. Double-pole switching isolates both live and neutral lines on each outlet, providing additional safety over single-pole designs. The faceplate is fabricated from 201 stainless steel and finished in antique brass, which gives a darker, warmer tone than polished brass and ages naturally over time.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and hospitality installation, the socket fits a standard 25mm minimum back box depth and uses a screwless cover plate that clips onto a separate metal sub-frame. This means there are no visible screws or fixings on the wall once installed, giving a cleaner finish than traditional screw-fixed plates. The 13A rating per outlet handles standard UK appliance loads up to 3,120W. A built-in gasket behind the faceplate forms a seal against the wall, preventing dust ingress and creating a flush finish on plaster and painted surfaces.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish pairs well with traditional, heritage and warm-toned contemporary interiors, particularly where other metalwork (door furniture, light fittings, taps) uses aged or antique brass. The black inserts behind the brass rockers and socket apertures give a defined edge to each control and hide the back of the cover plate. The socket carries a 25-year manufacturer guarantee and is certified to BS 1363-2, the British Standard for 13A socket outlets.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e31.9mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e9.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e22.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mmmm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate Depth\u003c\/td\u003e\n\u003ctd\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e201 Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-SFR9000AB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The screwless cover plate adds approximately 9.5mm of projection from the wall once fitted, giving a total depth of 31.9mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does double-pole switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDouble-pole (DP) switches isolate both the live and neutral lines when switched off, rather than just the live line as in single-pole designs. This provides additional safety when disconnecting high-draw appliances like washing machines or tumble dryers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the antique brass finish differ from polished brass?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAntique brass has a darker, warmer tone with a lower sheen than polished brass. The finish is designed to age naturally over time, developing a patina that deepens the colour. Polished brass remains brighter and more reflective unless intentionally aged.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391654887691,"sku":"SFR9000AB","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1941012_3fb9a47f-c306-4cef-8bb0-aa26422a279e.jpg?v=1747069251"},{"product_id":"13a-2-gang-dp-switched-socket-with-night-light-antique-brass-screwless","title":"13A 2 Gang DP Switched Socket With Night Light - Antique Brass Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang DP switched socket integrates an automatic night light controlled by a non-adjustable photocell sensor. The night light activates when ambient light falls below 15 lux and switches off when light exceeds 40 lux, removing the need for standalone plug-in night lights. The antique brass screwless faceplate conceals the fixing mechanism behind a cover plate that clips onto a separate metal sub-frame.\u003c\/p\u003e\n\u003cp\u003eDesigned for landings, children's bedrooms, hallways and hotel corridors where low-level orientation lighting is needed overnight, the socket combines 13A power outlets with soft ambient light from an integrated 0.8W LED at 4000K. The dual-pole switching isolates both live and neutral lines when the socket is switched off, providing additional safety over single-pole designs. The photocell sensor sits discreetly within the faceplate and operates automatically without manual control.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish develops a warm patina over time and pairs well with traditional, period and warm-toned contemporary interiors. The 201 stainless steel construction resists tarnishing better than plated alternatives. Each socket outlet is rated at 13A, handling standard UK appliances up to 3,120W per outlet. The twin earth terminals provide redundant safety earthing for high-draw appliances. The socket fits standard UK back boxes with a minimum depth of 25-35mm depending on cable routing.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e35.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e26.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate Depth\u003c\/td\u003e\n\u003ctd\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e201 Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e4000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e55lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e0.8W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy (Light source)\u003c\/td\u003e\n\u003ctd\u003e73.1lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-SFR9NLAB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the night light activate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integrated photocell sensor activates the night light automatically when ambient light falls below 15 lux and switches it off when light exceeds 40 lux. There is no manual override or adjustment. The LED emits 55 lumens at 4000K, providing enough orientation light for hallways and landings without being intrusive in bedrooms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum back box depth of 25-35mm is required depending on cable routing and the number of cables terminating at the socket. The screwless cover plate adds 4.7mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the night light separately switchable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The night light operates independently of the socket switches and cannot be manually turned on or off. It responds only to the photocell sensor, activating automatically at dusk and deactivating at dawn.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces the night light socket in polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other finishes in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391655346443,"sku":"SFR9NLAB","price":27.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1940896_717dad69-ef57-468c-8c97-84b06130cde2.jpg?v=1747069277"},{"product_id":"13a-1-gang-dp-lockable-socket-antique-brass-screwless-black-insert","title":"13A 1 Gang DP Lockable Socket - Antique Brass Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang DP lockable socket features a key-operated switch that controls power to the outlet, preventing unauthorised or unsupervised use. The double-pole switching isolates both live and neutral lines when locked off, cutting power completely rather than leaving the neutral live as single-pole switching would. The unit ships with two keys.\u003c\/p\u003e\n\u003cp\u003eDesigned for hotels, serviced apartments, student accommodation, care homes, retail back-of-house areas and shared workspaces, the lockable socket restricts access to mains power in public or semi-public zones. The 13A rating handles standard UK appliance loads up to 3,120W. The screwless faceplate clips onto a separate metal sub-frame, giving a clean wall finish with no visible fixings once installed.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish offers a warm aged-metal tone that suits period and heritage interiors, Victorian-style conversions, and pub or hotel refurbishments where modern safety features need to blend with traditional décor. The black insert behind the brass faceplate hides the back of the cover plate and gives a defined edge to the outlet aperture. The 201 stainless steel construction carries a 25-year manufacturer guarantee.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e46.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e8.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e38.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate Depth\u003c\/td\u003e\n\u003ctd\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e201 Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-SFR9LOCKAB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the key-lock function work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket has a key-operated rotary switch that controls power to the outlet. When locked in the off position, the double-pole switching isolates both live and neutral lines, cutting power completely. The socket ships with two keys, and replacement keys can be ordered from Knightsbridge using the product code.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 47mm back box depth is needed for safe installation. The screwless cover plate adds 8.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the keys be replaced if lost?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Knightsbridge supplies replacement keys for their lockable socket range. Contact Niori or Knightsbridge directly with the product code (SFR9LOCKAB) to order additional or replacement keys.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in the lockable socket range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces lockable sockets in multiple finishes including polished chrome, brushed chrome, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391655575819,"sku":"SFR9LOCKAB","price":28.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1942352_7ac257eb-518f-4da0-8681-5d8af7f18a29.jpg?v=1747069170"},{"product_id":"45a-cooker-control-switch-13a-socket-neon-indicators-antique-brass","title":"45A Cooker Control Switch 13A Socket Neon Indicators - Antique Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 45A cooker control unit combines a 45A double-pole isolator switch with a 13A switched socket and integrated neon indicators on an antique brass faceplate. The 45A switch provides safe isolation for electric cookers and hobs rated up to 10,440W at 230V, while the 13A socket supplies power to small kitchen appliances such as kettles or food processors.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation in kitchens and utility rooms, the unit allows a cooker or hob to be isolated for cleaning or maintenance without switching off the consumer unit, while the 13A socket remains independently switchable. The neon indicators show when power is flowing to each outlet, providing visual confirmation that the appliance is either live or safely isolated. The unit fits within 2 gang width (147.5mm) and requires a minimum 47mm back box depth.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish is a brushed warm brass tone with a darker patina that suits traditional and transitional kitchen styles. The faceplate is constructed from 201 stainless steel with the brass finish applied, giving durability and corrosion resistance in kitchen environments. The black socket apertures contrast against the brass plate to clearly define each outlet. Knightsbridge backs this unit with a 25-year guarantee.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e31.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e9.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e22.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mmmm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate Depth\u003c\/td\u003e\n\u003ctd\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e201 Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-SFR83MNAB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the 45A switch used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 45A double-pole switch isolates the power supply to an electric cooker or hob rated up to 10,440W at 230V. This allows the appliance to be serviced, cleaned or disconnected without needing to switch off the main consumer unit. The neon indicator shows when the cooker circuit is live.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the 13A socket and 45A switch be used independently?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 13A socket is independently switchable and does not depend on the state of the 45A cooker switch. This allows small appliances to be powered from the socket while the cooker circuit is isolated, or vice versa.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 47mm back box depth is required for safe installation. The unit projects 9.3mm from the wall once fitted, so total depth from the wall surface to the back of the back box needs to be at least 56mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do the neon indicators show?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach neon indicator lights when power is flowing to its corresponding outlet. The 45A switch neon shows when the cooker circuit is live, and the 13A socket neon shows when that socket is switched on and live. This provides visual confirmation of the electrical state without needing a voltage tester.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391655903499,"sku":"SFR83MNAB","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1942354_50e420fc-a407-47cb-a097-609597750df4.jpg?v=1747063207"},{"product_id":"13a-1-gang-switched-socket-dual-usb-fast-charge-antique-brass-screwless","title":"13A 1 Gang Switched Socket Dual USB Fast Charge - Antique Brass Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang switched socket adds USB-C and USB-A fast charge ports behind an antique brass screwless faceplate. Each USB port delivers up to 18W output per port using USB-PD and Qualcomm Quick Charge protocols, with a combined maximum of 20W when both ports charge simultaneously. The single 13A socket outlet provides standard UK mains power for appliances up to 3,000W.\u003c\/p\u003e\n\u003cp\u003eDesigned for bedside tables, study desks and kitchen worktops where a single socket plus device charging is needed, the fast charge capability cuts charging time for compatible smartphones and tablets compared to standard 5W USB ports. The socket uses automatic voltage switching to match the connected device's charging protocol, preventing overcharging. The screwless cover plate clips onto a separate metal sub-frame, leaving no visible fixings on the wall once installed.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish is achieved through a chemical patina applied to 201 stainless steel, giving a warm aged-metal appearance that develops slight tonal variation across the surface. The finish pairs well with period, classical and warm-toned contemporary interiors. The black insert behind the faceplate defines each outlet aperture and hides the back of the cover plate. The 4.3mm projection from the wall keeps the socket low-profile on surface-mounted installations.\u003c\/p\u003e\n\u003cp\u003eThe socket requires a 25-35mm back box depending on cable run and wiring conditions. The USB ports are rated CAT III for overvoltage protection, and Knightsbridge recommends using certified USB cables rated 30W or above to achieve full fast-charge performance without voltage drop.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e43.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e33.8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate Depth\u003c\/td\u003e\n\u003ctd\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e201 Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFastcharge\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-SFR9919AB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the fast charge output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach USB port delivers up to 18W maximum output (12V at 1.5A). When both ports charge devices simultaneously, the combined output is limited to 20W shared between the two ports. The socket supports USB-PD and Qualcomm Quick Charge protocols for compatible devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 25mm back box is required, with 35mm preferred when dealing with multiple cable runs or tight wiring conditions. The socket's recessed depth is 33.8mm, so adequate clearance behind the faceplate is essential for safe installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The antique brass cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting or decorating around the socket and re-clipped without disturbing the wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need special USB cables for fast charging?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge recommends using certified USB cables rated 30W or above to achieve full fast-charge performance. Lower-rated cables may limit charging speed due to voltage drop along the cable run, even when the socket itself supports higher output.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391656952075,"sku":"SFR9919AB","price":43.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1940906_835ff22d-1c4c-4db5-99c7-9b0980b921f8.jpg?v=1747069224"},{"product_id":"13a-2-gang-sp-switched-socket-dual-usb-a-usb-c-antique-brass-screwless","title":"13A 2 Gang SP Switched Socket Dual USB-A \u0026 USB-C - Antique Brass Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang SP switched socket adds one USB-A and one USB-C charging port behind an antique brass screwless faceplate with black inserts. The single-pole switching isolates the live line when the socket is switched off, while the dual USB ports share a 5V DC 4A output (20W max) for overnight charging of phones, tablets and small devices.\u003c\/p\u003e\n\u003cp\u003eDesigned for bedrooms, lounges, home offices and hospitality installations, the socket fits a standard 25-35mm back box depth and uses a screwless cover plate that clips onto a separate metal sub-frame. The 13A rating handles standard UK appliance loads up to 2,990W per outlet. The USB-C port supports modern fast-charge protocols for compatible devices, while the USB-A retains compatibility with older cables.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish is created through a controlled patina process on 201 stainless steel, giving the faceplate a warm aged-metal appearance with subtle tonal variation. The finish pairs well with traditional, classical and warm-toned contemporary interiors. The 4.3mm plate depth and 9.3mm projection from the wall give a low-profile installation, while the screwless design hides fixings for a cleaner visual finish than traditional screw-fixed plates.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e34.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e9.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e25.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate Depth\u003c\/td\u003e\n\u003ctd\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e201 Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-SFR9940AB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 25mm back box depth is needed, with 35mm preferred where wiring conditions allow. The screwless cover plate adds 9.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dual USB ports share a 5V DC 4A output with a maximum 20W across both ports. The USB-C port supports fast-charge protocols for compatible devices. Use certified 30W+ USB cables to ensure performance and safety.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between SP and DP switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSP (single-pole) switching isolates the live line only when switched off. DP (double-pole) switching isolates both live and neutral lines, providing additional safety for high-draw appliances. For most domestic applications SP switching is adequate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391657148683,"sku":"SFR9940AB","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1940910_84978418-431f-45ad-bbd4-218e71f0c7aa.jpg?v=1747069282"},{"product_id":"13a-2-gang-dp-switched-socket-dual-usb-a-usb-c-antique-brass-screwless","title":"13A 2 Gang DP Switched Socket Dual USB-A \u0026 USB-C - Antique Brass Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge 13A 2-gang DP switched socket adds one USB-C port (up to 27W) and one USB-A port (up to 18W) behind an antique brass screwless faceplate. The dual-pole switching isolates both live and neutral lines when the socket is switched off, providing additional safety for high-draw appliances. The USB-C port supports fast-charge protocols including USB-PD and Qualcomm Quick Charge, with intelligent voltage switching up to 20V DC at 2.25A.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and commercial installation, the socket fits a standard 25-35mm back box (depth depends on wiring conditions) and uses a screwless cover plate that clips onto a separate metal sub-frame. The 13A rating handles standard UK appliance loads up to 3,120W per outlet. The combined 45W USB output allows simultaneous charging of a tablet and smartphone without needing separate plug adaptors.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish is applied to 201 stainless steel, giving a warm aged-bronze tone that pairs with traditional, classical and heritage interiors. The screwless design hides all fixings behind the cover plate for a cleaner wall finish than traditional screw-fixed sockets. The plate measures 147.5mm wide by 87.5mm high with a 9.3mm projection from the wall once fitted, making it flush with most skirting boards and architraves.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e33.77mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e9.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e24.47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate Depth\u003c\/td\u003e\n\u003ctd\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e201 Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFastcharge\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-SFR9945AB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25-35mm back box depth is needed depending on cable bulk and wiring configuration. The screwless cover plate adds 9.3mm of projection from the wall once fitted. For tight installations or retrofit work, the deeper 35mm back box is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe USB-C port delivers up to 27W and the USB-A port up to 18W when used individually. When both ports are in use simultaneously, the combined output is 45W maximum. The USB-C supports USB-PD and Qualcomm Quick Charge protocols with intelligent voltage switching up to 20V at 2.25A.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring or disconnecting power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this dual USB-A+C socket in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391657378059,"sku":"SFR9945AB","price":58.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1940912_f9e0064f-2404-4843-a944-71224f751ea5.jpg?v=1747069258"},{"product_id":"13a-2-gang-dp-switched-socket-dual-usb-c-fast-charge-antique-brass-screwless","title":"13A 2 Gang DP Switched Socket Dual USB-C Fast Charge - Antique Brass Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SFR9965AB is a 13A 2-gang DP switched socket with two USB-C fast charge ports behind an antique brass screwless faceplate. The USB-C ports deliver up to 65W output per port when used individually, or 45W + 18W when both ports are active simultaneously, supporting USB Power Delivery (PD) and Programmable Power Supply (PPS) protocols for compatibility with smartphones, tablets and small laptops.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and office installation, the socket fits a standard 25-35mm back box depth depending on wiring conditions. The screwless cover plate clips onto a separate metal sub-frame, leaving no visible fixings on the wall once installed. The dual-pole switching isolates both live and neutral lines when the socket is switched off, providing additional safety for high-draw appliances.\u003c\/p\u003e\n\u003cp\u003eThe antique brass finish is applied to 201 stainless steel construction, giving a warm aged-metal appearance that pairs with traditional, classical and warm-toned contemporary interiors. The finish shows a deliberately tarnished patina that softens reflections and adds depth under both natural and artificial light. The 13A rating handles standard UK appliance loads up to 3,120W per outlet, while the USB-C ports use dynamic voltage switching to match device power requirements automatically.\u003c\/p\u003e\n\u003cp\u003eBuilt-in overload, overheat and overcurrent protection safeguards both the mains outlets and USB charging ports. The socket carries CAT III overvoltage protection and an IP20 rating for indoor dry-location use. For full 65W charging performance, use 100W-rated USB-C cables — lower-rated cables will limit the output to their own maximum capacity.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e34.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e9.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e24.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate Depth\u003c\/td\u003e\n\u003ctd\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e201 Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFastcharge\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eCaptive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-SFR9965AB.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25-35mm back box depth is needed depending on wiring conditions. The socket has a recessed depth of 24.7mm and projects 9.7mm from the wall once the screwless cover plate is fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB-C charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach USB-C port delivers up to 65W (20V DC 3.25A) when used alone. When both ports are active simultaneously, the output splits to 45W on one port and 18W on the other. The socket supports USB Power Delivery (PD) and Programmable Power Supply (PPS) protocols.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need special cables for full charging speed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. To achieve the full 65W output, use USB-C cables rated for 100W or higher. Lower-rated cables will limit the charging speed to their own maximum capacity, even though the socket can deliver 65W.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The antique brass cover plate clips onto a separate metal sub-frame that's fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring or disturbing the mains connections.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51392040468747,"sku":"SFR9965AB","price":71.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/2039442_2834fc07-6ad3-414c-9677-f630df6ee403.jpg?v=1747070479"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/collections\/122538_c4854c7f-3fc6-4f71-8360-c4239556fe74.jpg?v=1789991452","url":"https:\/\/niori.co.uk\/collections\/brass-sockets.oembed","provider":"Niori","version":"1.0","type":"link"}