{"title":"Black Sockets","description":"\u003cp\u003eA black socket is the detail that stops a white plate interrupting a dark wall. We hand-pick sockets in matt black and black nickel, in single and double gangs, with and without USB charging, so the electrics on a feature wall read as part of the scheme rather than something left over from the build. Most are standard thirteen amp fittings, so they swap straight into an existing back box.\u003c\/p\u003e","products":[{"product_id":"13a-1-gang-sp-switched-socket-dual-usb-a-usb-c-matt-black-screwless-black-insert","title":"13A 1 Gang SP Switched Socket Dual USB-A \u0026 USB-C - Matt Black Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang SP switched socket adds one USB-A and one USB-C fast-charge port behind a matt black screwless faceplate with a black insert. The dual USB configuration delivers up to 18W when a single port is in use, or 20W shared (5V DC, 4.0A total) when both ports charge simultaneously. The single-pole switch isolates the live conductor when off, suitable for standard residential loads up to 2,990W.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, office and hospitality installation, the socket fits a 35mm minimum back box depth and uses a screwless cover plate that clips onto a separate steel sub-frame. The USB-C port supports PD (Power Delivery) and QC (Quick Charge) protocols, allowing compatible smartphones and tablets to reach 0-50% charge in approximately 30 minutes. Adaptive charging automatically adjusts voltage to match each connected device, and built-in overload, overheat and over-current protection prevents damage to both the socket and connected equipment.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish provides a low-sheen surface that minimises fingerprint visibility and pairs cleanly with contemporary, industrial and monochrome interiors. The black insert behind the faceplate hides the back of the cover plate and gives a defined edge to each outlet and USB aperture. The socket carries Over Voltage Category III approval for use in fixed installations and draws 0.1W on standby. A 10mm spacer is included for mounting flexibility in back boxes of varying depth.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFastcharge\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3918490_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1295702.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 35mm minimum back box depth is needed for safe installation. A 10mm spacer is included to accommodate mounting variation in deeper back boxes. The screwless cover plate adds approximately 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket delivers up to 18W when only one USB port is in use, or 20W shared (5V DC, 4.0A total) when both ports charge simultaneously. The USB-C port supports PD and QC fast-charge protocols for compatible devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate steel sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes charging slow down as the battery fills?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Fast-charge protocols automatically reduce charging speed once a device reaches approximately 70% capacity to protect battery longevity. This is standard behaviour across PD and QC charging and is not specific to this socket.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293560627467,"sku":"SFR9919MBB","price":41.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/470920_365fbe03-ff1c-4694-a813-9d8da0c6e431.jpg?v=1714660423"},{"product_id":"ip66-13a-2-gang-dp-rcd-switched-socket-type-a-30ma","title":"IP66 13A 2 Gang DP RCD Switched Socket - Type A 30mA","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge OP9RCD is an IP66-rated 13A 2-gang double-pole switched socket with integrated Type A 30mA RCD protection, housed in a black polycarbonate weatherproof enclosure. The transparent smoked lid lifts on hinges and can be held open during use, while the IP66 rating protects the socket from heavy rain and dust ingress when the lid is closed.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor use in gardens, patios, workshops and garages, the socket provides twin 13A outlets for powering garden tools, pressure washers, outdoor lighting and power equipment. The integrated Type A RCD provides protection against AC residual current and pulsating DC up to 6mA, making it suitable for equipment with electronic components such as IT equipment, chargers and modern power tools. The RCD is a passive latching type that automatically resets after a power outage without requiring manual intervention.\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate casing is rated IK06 for impact resistance and measures 170mm wide by 159mm high with a 90mm projection from the wall once installed. The enclosure has multiple 20mm cable entry points and wider internal cable channels that accommodate plugs with thick over-moulded strain relief common on outdoor equipment. The outboard rocker switches provide double-pole isolation, and dual earth terminals inside the unit allow for loop-in\/loop-out wiring. The smoked black front panel allows the green RCD indicator to remain visible when the unit is powered and protected.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e159 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e170 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eCaptive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCD functionality\u003c\/td\u003e\n\u003ctd\u003e30mA Type-A latching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3954095_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1150698.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Type A RCD protection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eType A RCD provides protection against both AC residual current and pulsating DC up to 6mA. This makes it suitable for modern equipment with electronic components, including power tools with variable speed controls, IT equipment, battery chargers and devices with switch-mode power supplies. The 30mA trip current provides personal protection against electric shock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the RCD need to be manually reset after a power cut?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This unit uses a passive latching RCD that automatically resets after a power outage without requiring manual intervention. The socket will be live again once mains power is restored, provided no fault condition exists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in permanent rain or washdown areas?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP66 rating protects against heavy rain and powerful water jets when the lid is closed. However, the socket is not submersible and should not be installed where it will sit in pooled water. When plugs are inserted and the lid is open, the IP rating no longer applies and the unit should not be used in active rainfall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable entries does it have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unit has multiple 20mm cable entry points on the base and sides, allowing flexible positioning and loop-in\/loop-out wiring. The dual earth terminals inside support this configuration. The wider internal cable channels accommodate plugs with thick over-moulded strain relief commonly found on outdoor extension leads and equipment.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293583270155,"sku":"OP9RCD","price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/439654_bba235c6-47a9-4778-b07c-df91e7879fda.jpg?v=1714660725"},{"product_id":"4-gang-socket-8-module-combo-plate-matt-black-screwless","title":"4 Gang Socket \u0026 8 Module Combo Plate - Matt Black Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge combination plate houses four 13A double-pole switched sockets and eight Euro module apertures (25 x 50mm each) behind a single matt black screwless faceplate measuring 297.5 x 179.5mm. The socket outlets are rated at 13A each on 230V mains, and the Euro module apertures accept any standard 25 x 50mm modular insert including HDMI, Cat6 networking, USB chargers, coaxial satellite\/TV outlets, phone jacks, and audio connectors.\u003c\/p\u003e\n\u003cp\u003eDesigned for media walls, home cinema installations, office workstations and kitchen island power hubs where both mains outlets and AV\/data connectivity are needed in one location, the combination plate eliminates the need for separate faceplates dotted across a wall. The four sockets provide enough outlets for a TV, soundbar, streaming box and router, while the eight module positions allow bespoke signal distribution to be configured on-site. The double-pole switching isolates both live and neutral lines when each socket is turned off, offering additional safety over single-pole switching for always-on devices.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish is a low-sheen powder coat over premium-grade steel, providing corrosion resistance and a durable surface that pairs well with contemporary, industrial and minimalist interiors. The screwless cover plate clips onto a separate metal sub-frame fixed to the back box, hiding all fixings from view once installed. The plate requires a 35mm minimum back box depth and projects 4.5mm from the wall when fitted, with a recessed depth of 21.2mm for the module and socket apertures. The plate carries a Class I earthing terminal and an IP20 rating for dry indoor use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e179.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e297.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e21.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4140547_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292714.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 35mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.5mm of projection from the wall once fitted, with 21.2mm recessed depth for the socket and module apertures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat Euro module inserts are compatible?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAny standard 25 x 50mm Euro module insert fits the eight apertures. This includes HDMI, Cat6 networking, USB chargers, coaxial satellite\/TV outlets, phone jacks, audio connectors, and blanking plates. Knightsbridge produces a wide range of compatible inserts in matching matt black finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the screwless plate be removed after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for redecorating or reconfiguring module inserts and re-clipped without re-wiring the sockets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat applications is this combination plate suited to?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe plate suits media walls behind wall-mounted TVs, home cinema equipment racks, office workstations needing both power and data connectivity, and kitchen island hubs where appliances and AV\/networking outlets need to be consolidated in one location rather than spread across multiple faceplates.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293594280203,"sku":"SFR298MBB","price":48.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/835844_7f341abe-e3e5-4fe3-9708-23f9bc43e6ce.jpg?v=1714660930"},{"product_id":"remote-controlled-ip66-13a-2-gang-outdoor-socket-black","title":"Remote Controlled IP66 13A 2 Gang Outdoor Socket - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge OP9R is an IP66-rated 13A 2-gang outdoor socket with wireless remote control, allowing both outlets to be switched on or off from a key-fob transmitter at distances up to 30m. The socket housing is built from black polycarbonate with a hinged weatherproof lid and rubber gasket seal, designed to maintain IP66 protection against dust ingress and heavy rain when closed.\u003c\/p\u003e\n\u003cp\u003eDesigned for controlling seasonal outdoor devices such as pond pumps, water feature lighting, Christmas lights and patio heaters, the socket mounts to an external wall using a standard 25mm outdoor back box. Each outlet is rated at 13A, giving a combined maximum load of 2990W across both gangs when both are in use simultaneously. The wireless control removes the need to walk to the socket in poor weather or darkness to switch devices on or off.\u003c\/p\u003e\n\u003cp\u003eThe key-fob remote uses two CR2016 lithium batteries (included) and operates both outlets independently or together depending on the control sequence programmed during setup. The 30m range is line-of-sight — walls, fences and thick planting reduce effective distance. The IK06 impact rating provides protection against moderate knocks from garden furniture, tools and incidental contact during outdoor maintenance.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e153 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e170 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4401674_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1172102.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the remote control range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe key-fob remote operates up to 30m from the socket in line-of-sight conditions. Walls, fences, thick planting and building structures reduce the effective range. The remote uses two CR2016 lithium batteries, which are included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan both sockets be controlled independently?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The remote can be programmed to control each outlet independently or both together, depending on the setup sequence followed during installation. See the product manual for programming instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket requires a standard 25mm outdoor back box with earth terminal. The 84mm projection measurement includes the socket body and the weatherproof lid when closed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the IP66 rating apply when the lid is open?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP66 rating against dust and heavy rain applies only when the hinged lid is closed and the rubber gasket seal is fully compressed. When the lid is open to access the outlets, the socket is exposed to the weather.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293603520779,"sku":"OP9R","price":48.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/720688_25d3f635-fbed-4a84-9940-913f12f725b4.jpg?v=1714661065"},{"product_id":"13a-2-gang-dp-switched-socket-with-4-module-multimedia-plate-matt-black-screwless","title":"13A 2 Gang DP Switched Socket with 4-Module Multimedia Plate - Matt Black Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge multimedia combination plate integrates a 13A 2-gang DP switched socket with a blanked aperture sized to accept up to four Euro module inserts (25 x 50mm each). The single matt black screwless faceplate combines mains power and low-voltage signal distribution behind one unified finish, allowing HDMI, satellite, network, USB or other modular inserts to be installed alongside standard 13A outlets.\u003c\/p\u003e\n\u003cp\u003eDesigned for media walls, home offices, hotel rooms and AV installations where multiple signal types converge at a single point, the plate eliminates the need for separate faceplates for power and data. The double-pole switches on each socket isolate both live and neutral when off, providing additional safety for high-draw equipment. The 180 x 147.5mm faceplate fits a double-gang back box and the screwless cover clips onto a separate metal sub-frame.\u003c\/p\u003e\n\u003cp\u003eThe matt black powder-coated steel finish resists fingerprints better than gloss alternatives and pairs cleanly with dark walls, media units and contemporary interiors. The plate accepts standard Knightsbridge Euro modules including HDMI, Cat6 network, satellite F-type, DAB aerial, USB-A, USB-C, 3.5mm audio and telecom inserts, sold separately. The modular aperture arrives blanked — you choose which inserts to fit based on your installation requirements.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e21.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4419927_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292682.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat Euro module inserts are compatible?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe plate accepts standard 25 x 50mm Euro modules from Knightsbridge, including HDMI, Cat6 network, satellite F-type, DAB aerial, USB-A, USB-C, 3.5mm audio and telecom inserts. Modules are sold separately and clip into the aperture without tools once the faceplate is removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA double-gang 35mm minimum depth back box is required. The plate's recessed depth is 21.2mm, and the screwless cover adds 4.5mm projection from the wall once installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the module configuration be changed after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The screwless cover plate clips off the sub-frame without re-wiring, allowing Euro modules to be swapped, added or removed as requirements change. The mains socket wiring remains fixed to the back box terminals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the matt black finish resistant to scratches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe powder-coated steel construction is more resistant to surface scratches than plastic alternatives, though it is not impervious to deliberate abrasion or impact damage. The matt finish hides minor scuffs better than gloss or polished finishes.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293611254027,"sku":"SFR194MBB","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/835908_05db4b0d-84b1-48a8-98dd-08b5afc7a06d.jpg?v=1714661158"},{"product_id":"13a-2-gang-dp-socket-2-gang-modular-combi-plate-matt-black-screwless-black-insert","title":"13A 2 Gang DP Socket \u0026 2 Gang Modular Combi Plate - Matt Black Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang DP socket and 2-gang modular combination plate combines two switched 13A sockets with two open apertures sized to accept standard 25x50mm euro modular inserts. The matt black screwless faceplate measures 235mm wide by 87.5mm high, covering both the socket outlets and the modular section in a single unified plate with no visible fixings.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchens, home offices, home cinema installations and AV setups where power and data\/signal connections need to sit together on one wall plate, the combination layout saves space and reduces the number of separate faceplates needed. The 2-gang modular section accepts any standard 25x50mm euro inserts including USB chargers, HDMI modules, coaxial satellite sockets, CAT6 data modules, or blanking plates. The double-pole switching on the 13A outlets isolates both live and neutral when switched off, providing additional safety for high-draw appliances.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish is a low-sheen powder coat applied to premium-grade steel, providing durability and resistance to fingerprints and surface marks. The screwless cover plate clips onto a separate metal sub-frame fixed to the mounting box, so no screws or fixings are visible on the wall once installed. The combination plate requires a 35mm minimum back box depth and projects 4.5mm from the wall when fitted. Twin earth terminals on the 2-gang socket section ensure safe earthing for all connected appliances.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e235 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e21.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4420198_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292560.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat modular inserts does this accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe two modular apertures accept any standard 25x50mm euro inserts including USB chargers, HDMI, coaxial satellite, CAT6 data modules, or blanking plates. Modular inserts are sold separately and clip into the apertures from the front once the plate is installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 35mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.5mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this combination plate style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293611745547,"sku":"SFR192LMBB","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/835880_f65949c0-8e24-4405-936d-edd9fa80a4c9.jpg?v=1714661175"},{"product_id":"13a-2-gang-dp-switched-socket-2-gang-modular-plate-matt-black-screwless-black-insert","title":"13A 2 Gang DP Switched Socket + 2 Gang Modular Plate - Matt Black Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SFR192RMBB combines a 13A 2-gang double-pole switched socket with a 2-gang modular combination plate behind a single matt black screwless faceplate with a black insert. The modular section accepts two euro-format inserts (sold separately) for telecoms, networking, HDMI, USB charging or other low-voltage connections, consolidating power and data into a single wall aperture.\u003c\/p\u003e\n\u003cp\u003eDesigned for home offices, media walls, kitchen islands and anywhere that needs both mains power and data connectivity without running multiple back boxes, the combination plate fits a standard 35mm minimum back box depth. The screwless cover plate clips onto a separate steel sub-frame, leaving no visible screws or fixings on the wall once installed. The 13A rating per outlet handles standard UK appliance loads up to 3,120W, while the double-pole switching isolates both live and neutral lines when switched off.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish provides a low-reflectivity surface that suits contemporary, industrial and minimal interiors. The black insert behind the faceplate conceals the back of the cover plate and gives a defined edge to each outlet and modular aperture. The 235mm width occupies the same footprint as a standard double back box, making it compatible with existing twin-socket wall cut-outs during renovation or retrofit.\u003c\/p\u003e\n\u003cp\u003eThe twin earth terminals on the double socket provide safe earth continuity for ring circuits, and the premium-grade steel construction carries a 25-year warranty. The modular inserts are user-replaceable without re-wiring the back box, allowing telecoms and data connections to be updated as standards change.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e235 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e21.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4420232_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292612.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat modular inserts does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2-gang modular section accepts any standard euro-format inserts, including RJ45 cat5e\/cat6 data sockets, RJ11 telephone sockets, HDMI, coaxial TV, USB charging modules and blank plates. Inserts are sold separately and clip into the faceplate apertures without tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 35mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.5mm of projection from the wall once fitted, with the recessed depth of the plate requiring 21.2mm clearance behind the faceplate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate steel sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring or disturbing the modular inserts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the modular inserts be changed later?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The euro-format inserts are user-replaceable and clip in and out of the faceplate apertures. This allows telecoms and data connections to be updated as standards change without replacing the entire combination plate or re-wiring the back box.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293612695819,"sku":"SFR192RMBB","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/835890_5fa79817-9e7d-4727-81b4-562d1883e751.jpg?v=1714661191"},{"product_id":"13a-dp-key-lockable-socket-2-gang-matt-black-screwless","title":"13A DP Key Lockable Socket 2 Gang - Matt Black Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A DP key lockable socket is a 2-gang switched socket with a key-operated lock mechanism built into each outlet position, preventing unauthorised access to mains power. The matt black screwless faceplate sits flush on a separate metal sub-frame, giving a clean finish without visible fixings. The double-pole switching isolates both live and neutral lines when locked off, providing additional safety over single-pole designs.\u003c\/p\u003e\n\u003cp\u003eDesigned for communal and commercial spaces where electricity access needs controlling, the socket suits student accommodation, hotel rooms, office hot-desking areas, communal kitchens, and shared facilities in apartment blocks. Each outlet can be locked independently using the supplied keys, allowing one socket to remain active while the other is disabled. The 13A rating handles standard UK appliance loads up to 3,120W per outlet.\u003c\/p\u003e\n\u003cp\u003eThe premium-grade steel construction and IP20 rating make the socket suitable for indoor installation in high-traffic areas. The recessed depth of 38.2mm requires a minimum 47mm back box for safe fitting, which is deeper than standard 25mm boxes. The matt black finish provides a low-sheen neutral tone that pairs with both contemporary and industrial interiors, and the screwless cover plate can be removed for redecorating without re-wiring.\u003c\/p\u003e\n\u003cp\u003eKnightsbridge backs this socket with a 25-year warranty, reflecting the build quality and expected lifespan in commercial and residential use. The socket includes two keys per lock position, allowing a master key to be retained by facilities management while providing access keys to authorised users.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e38.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4529478_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1298840.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 47mm back box depth is needed for safe installation. This is deeper than standard 25mm boxes used for non-lockable sockets, due to the key-lock mechanism housed behind the faceplate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan each socket be locked independently?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each of the two outlets has its own key-lock mechanism, allowing one socket to remain active while the other is disabled. This is useful in shared spaces where partial access is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many keys are supplied?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket includes two keys per lock position. In a 2-gang configuration this means four keys total, allowing facilities management to retain master keys while providing access keys to authorised users.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The matt black cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without disturbing the wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293615317259,"sku":"SFR9LOCKMB","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/908422_1cae65b7-bef9-4121-bdae-be018e48799d.jpg?v=1714661226"},{"product_id":"shaver-socket-with-dual-usb-a-usb-c-matt-black-screwless-black-insert","title":"Shaver Socket With Dual USB-A \u0026 USB-C - Matt Black Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge shaver socket combines a 230V single-voltage shaver outlet with one USB-A and one USB-C charging port behind a matt black screwless faceplate with a black insert. The 20VA transformer isolates the shaver outlet from the mains supply, meeting BS EN 61558 safety standards for bathroom installation. The IP41 rating protects against solid objects larger than 1mm and vertically falling water drops.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathroom installation in zones 2 and 3 (outside the immediate shower or bath area), the socket fits a 47mm minimum back box depth and uses a screwless cover plate that clips onto a separate metal sub-frame. The built-in gasket around the plate edge provides additional moisture protection when the plate is clipped into place. The dual USB ports share a 5V DC 2.4A output, allowing simultaneous charging of electric toothbrushes, shavers, phones and tablets without needing a separate adapter.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish is powder-coated onto premium-grade steel, giving a low-sheen surface that resists fingerprints and water spotting better than polished finishes. The black insert behind the faceplate hides the back of the cover plate and provides visual separation between the shaver outlet aperture and the USB ports. At 147.5mm high and 87.5mm wide, the plate is taller than a standard double socket to accommodate the transformer and USB charging circuitry.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4679944_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292352.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zones is this shaver socket suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP41 rating makes it suitable for zones 2 and 3 in a bathroom (outside the immediate shower or bath enclosure). It should not be installed in zone 0 (inside a bath or shower tray) or zone 1 (directly above a bath or shower tray).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is needed to accommodate the transformer and USB charging circuitry. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dual USB ports share a 5V DC 2.4A output. This means the total output is 2.4A whether you're using one port or both simultaneously — if both ports are in use, the current is divided between them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this charge modern USB-C devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The USB-C port supports standard 5V charging for phones, tablets, electric toothbrushes and shavers. It does not support higher-voltage fast-charge protocols (USB Power Delivery), so charging speed will be comparable to a basic USB charger.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293640679691,"sku":"SF8909MB","price":47.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/950838_d7a76d04-d9bc-41e3-8895-996f294ac686.jpg?v=1714661626"},{"product_id":"shaver-socket-with-dual-usb-a-usb-c-black-nickel-screwless-black-insert","title":"Shaver Socket With Dual USB-A \u0026 USB-C - Black Nickel Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SF8909BN is a 230V shaver socket with integrated USB-A and USB-C charging ports behind a black nickel screwless faceplate with a black insert. The unit combines a dual-voltage shaver outlet (115V and 230V) with 5V DC USB charging at 2.4A shared output, allowing shavers and electric toothbrushes to run simultaneously with phone or tablet charging.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for bathroom installation, the socket carries an IP41 rating that protects against solid objects larger than 1mm and vertically dripping water. The built-in gasket behind the screwless cover plate provides additional moisture resistance when the cover is correctly fitted to the metal sub-frame. The 230VAC 20VA transformer isolates the shaver outlet from the mains supply, meeting EN 61558 safety certification for use in wet environments.\u003c\/p\u003e\n\u003cp\u003eThe socket requires a 47mm minimum back box depth for safe installation. The screwless cover plate clips onto a separate metal sub-frame fixed to the back box, leaving no visible screws or fixings on the wall once installed. The black nickel finish provides a dark metallic accent that pairs with contemporary bathroom schemes, particularly where black tapware, shower fittings or mirror frames are already in use. The 4.3mm projection from the wall gives a low profile that suits tight clearances around mirrors and splashbacks.\u003c\/p\u003e\n\u003cp\u003eThe USB-C port supports modern fast-charge protocols for newer devices, while the USB-A maintains compatibility with older cables. Both USB ports share the 2.4A output, so charging speed reduces when two devices draw power simultaneously. The shaver outlet operates independently of the USB ports and can run a shaver or toothbrush at the same time as USB charging without affecting performance.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4679953_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292348.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this safe for bathroom use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The socket carries an IP41 rating and meets EN 61558 certification for bathroom installation. The shaver outlet uses an isolated transformer that separates the shaver circuit from the mains supply. The built-in gasket behind the screwless plate provides additional moisture resistance when correctly fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is needed. The recessed depth of the fitting itself is 45mm, and the 4.3mm projection from the wall once fitted gives the overall clearance requirement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe USB-A and USB-C ports share a 5V DC 2.4A output. When two devices charge simultaneously, the 2.4A is split between them, reducing the charge rate for each device. The USB-C port supports modern fast-charge protocols where the device and cable are compatible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use a shaver and charge a phone at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 230V shaver outlet operates independently of the USB charging circuit, so you can run a shaver or electric toothbrush from the shaver socket while simultaneously charging devices via USB without affecting either function.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293641105675,"sku":"SF8909BN","price":47.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/950842_f101a32a-04cf-4324-934c-c1b9a02c7ef1.jpg?v=1714661631"},{"product_id":"13a-1-gang-unswitched-floor-socket-matt-black-black-insert","title":"13A 1 Gang Unswitched Floor Socket - Matt Black (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang unswitched floor socket is a flush-mounted power outlet designed for installation into floors in offices, hotels, exhibition spaces and contemporary residential interiors. The socket sits behind a spring-loaded hinged cover made from matt black premium-grade steel that closes automatically when not in use, reducing dust ingress and keeping the floor surface flat and trip-free.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation into a 35mm minimum back box set into the floor void, the socket projects just 3mm above the finished floor level when closed. The spring-loaded cover lifts to reveal a single 13A unswitched outlet with an earth terminal, allowing plug-in access to mains power for floor-standing lamps, cleaning equipment, portable appliances or temporary exhibition lighting. The unswitched design means no rocker or toggle switch to fail or be accidentally turned off.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish on both the faceplate and the black insert provides a low-contrast monochrome surface that integrates into dark timber floors, polished concrete, stone and industrial-style interiors without creating a visual break. The premium-grade steel construction carries a 25-year warranty and an IP20 rating, which confirms protection against solid objects over 12.5mm but not against liquid ingress — this socket is for dry indoor use only, not bathrooms or outdoor areas.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\" style=\"width: 100%; height: 215.6px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eHeight\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e94.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eWidth\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e86 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eProjection\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eIP Rating\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4714773_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1286558.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is needed for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 35mm minimum mounting box depth is required. The socket itself recesses 30mm into the floor void, with 3mm projection above the finished floor level when the spring-loaded cover is closed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the socket switched or unswitched?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnswitched. There is no rocker or toggle switch on the faceplate — the outlet is always live when wired to mains power. This reduces mechanical parts that could fail and simplifies use in high-traffic commercial settings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathrooms or outdoor areas?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating confirms protection against solid objects over 12.5mm but not against liquid ingress. This socket is for dry indoor use only — offices, hotel lobbies, residential living areas, exhibition halls — not wet rooms, bathrooms, kitchens near sinks, or outdoor decking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the spring-loaded cover work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe hinged cover lifts manually to access the outlet and closes automatically under spring tension when released. This keeps the floor surface flush when not in use, reducing trip hazards and preventing dust and debris from entering the socket aperture.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293641367819,"sku":"FPR7UMB","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/973224_0293e8ff-0e9d-4992-ba8e-a24868f11867.jpg?v=1714661640"},{"product_id":"13a-2-gang-unswitched-floor-socket-matt-black-black-insert","title":"13A 2 Gang Unswitched Floor Socket - Matt Black (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang unswitched floor socket provides two standard UK outlets behind a spring-loaded matt black cover that sits flush with the floor when closed. The socket is designed for in-floor installation where surface-level power access is needed without the visual clutter of trailing cables or raised boxes.\u003c\/p\u003e\n\u003cp\u003eTypical applications include hotel rooms, conference facilities, open-plan offices, meeting rooms, kitchens with island units, and exhibition spaces where power needs to be accessible in the centre of a floor area without permanent fixtures. The spring-loaded cover returns to the closed position when not in use, protecting the outlets from dust, spills and foot traffic. The 3mm projection above floor level when closed minimises trip hazards while keeping the socket accessible.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish on the premium-grade steel construction provides a low-sheen surface that reduces fingerprint visibility and pairs cleanly with dark timber floors, polished concrete, carpet tiles and vinyl. The socket is rated IP20 for indoor use and requires a 35mm minimum back box depth for installation. At 144mm × 94.5mm the footprint is compact enough to fit between floor joists in most residential and commercial builds. The unswitched design means power is live to both outlets whenever the circuit is energised, which is standard for floor sockets where the spring cover acts as the primary barrier.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e94.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e144 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4714824_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1287658.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat floor covering can this be fitted into?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket is designed for installation into timber subfloors, raised access floors and screed bases. It requires a 35mm back box recessed below the finished floor surface, with the socket then sitting 3mm proud. Suitable for timber, carpet, vinyl and polished concrete finishes where the 144mm × 94.5mm cutout can be accommodated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the socket switched or unswitched?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is an unswitched socket, meaning power is live to both outlets whenever the circuit is energised. The spring-loaded cover acts as the primary barrier when the socket is not in use. If individual outlet switching is required, Knightsbridge produces a switched variant in this same range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms or wet areas?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the socket is suitable for dry indoor environments only. It is not rated for use in bathrooms, kitchens with floor-level wet zones, or outdoor areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the spring-loaded cover work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePress the cover and it lifts to reveal the two outlets. When you remove the plugs, the cover returns to the closed position under spring tension, sitting flush with the floor and protecting the outlets from dust and debris.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293641433355,"sku":"FPR9UMB","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/973230_55f3e582-ca90-49b7-bb16-a2645b7d6a95.jpg?v=1714661642"},{"product_id":"45a-dp-cooker-switch-13a-socket-with-neons-black-nickel-screwless-black-insert","title":"45A DP Cooker Switch \u0026 13A Socket with Neons - Black Nickel Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 45A DP cooker switch with 13A socket combines a double-pole 45A isolator for electric cookers and ovens with a switched 13A socket for auxiliary appliances, behind a black nickel screwless faceplate with a black insert. Both the 45A switch and the 13A socket carry red neon indicators that illuminate when the circuit is live, providing visual confirmation of power status before maintenance or cleaning.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchen installation within 2m of the cooker position (as required by UK wiring regulations), the unit allows the cooker to be isolated at the wall without switching off other kitchen circuits. The 13A socket can power a kettle, microwave or other small appliance within the same control unit footprint. The double-pole switching isolates both live and neutral lines on the 45A circuit, providing a safe isolation point for cooker servicing or replacement.\u003c\/p\u003e\n\u003cp\u003eThe black nickel finish is a dark gunmetal tone that sits between brushed steel and matt black, pairing with both stainless steel appliances and darker kitchen cabinetry. The screwless cover plate clips onto a separate metal sub-frame fixed to the back box, leaving no visible screws or fixings on the wall once installed. The unit requires a minimum 47mm back box depth and is rated IP20 for standard indoor dry-location use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4971520_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is needed to accommodate the switch mechanism, socket terminals and cable runs. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do the neon indicators show?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth the 45A switch and the 13A socket carry red neon indicators that illuminate when the circuit is live. The neons provide visual confirmation that power is present, which is useful before carrying out maintenance or cleaning of the cooker.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this control two cooking appliances?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided the combined load does not exceed 45A (approximately 10,350W at 230V). Two single ovens or an oven and hob can be controlled through a single 45A cooker switch if the total current draw is within the rating. Check appliance specifications before wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting or tiling around the switch and re-clipped without disturbing the wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293666435339,"sku":"SFR83MNBN","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1111384_ab40f8fd-ad75-41e6-82be-91ccd531d2a0.jpg?v=1714662147"},{"product_id":"45a-dp-cooker-switch-13a-socket-with-neons-matt-black-screwless-black-insert","title":"45A DP Cooker Switch \u0026 13A Socket with Neons - Matt Black Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 45A DP cooker switch combines a double-pole 45A isolation switch with a 13A switched socket on a single matt black screwless faceplate with a black insert. Two neon indicators on the plate show when each circuit is live, allowing the cooker circuit and the socket to be monitored independently. The double-pole switching isolates both live and neutral lines when the cooker switch is off, preventing accidental activation during cleaning or maintenance.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchens where a dedicated cooker circuit needs to be controlled alongside a separate 13A outlet for small appliances, the unit fits a 47mm minimum back box depth and uses a screwless cover plate that clips onto a separate metal sub-frame. The 45A rating handles electric cookers, ovens and hobs up to 10,350W on a 230V supply, while the 13A socket accommodates kettles, microwaves and other kitchen appliances up to 3,120W. The neon indicators provide visual confirmation that the circuits are isolated before maintenance work begins.\u003c\/p\u003e\n\u003cp\u003eThe premium-grade steel construction and matt black finish pair with modern and industrial kitchen schemes. The black insert behind the matt black faceplate hides the back of the cover plate and defines the edges of each switch and socket aperture. The screwless design means no visible fixings on the wall once the cover plate is clipped onto the sub-frame, giving a cleaner finish than traditional screw-fixed plates. The unit carries a 25-year warranty and an IP20 rating for indoor dry-location use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4971527_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat appliances can be connected to the 45A switch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 45A double-pole switch is rated for electric cookers, ovens and hobs up to 10,350W on a 230V supply. This covers most domestic electric cooking appliances including built-in ovens, separate hobs and range cookers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the purpose of the neon indicators?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe two neon indicators show when each circuit is live. One neon monitors the 45A cooker circuit, the other monitors the 13A socket. When the switch is off, the corresponding neon goes dark, confirming the circuit is isolated before maintenance work begins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is needed for safe installation. The screwless cover plate adds approximately 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the unit and re-clipped without re-wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293666566411,"sku":"SFR83MNMBB","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1106766_75ad3316-7784-4c38-8cdc-6a47f00427c7.jpg?v=1714662150"},{"product_id":"13a-2-gang-dp-switched-socket-dual-usb-a-usb-c-matt-black-screwless-black-insert","title":"13A 2 Gang DP Switched Socket Dual USB-A \u0026 USB-C - Matt Black Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang DP switched socket adds one USB-A port (18W) and one USB-C port (up to 45W) behind a matt black screwless faceplate with a black insert. The dual-pole switching isolates both live and neutral lines when the socket is switched off, providing additional safety over single-pole switching for high-draw appliances. Both USB ports support fast-charge protocols (PD and QC), with adaptive voltage delivery that adjusts output based on the connected device.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and office installation, the socket fits a standard 25-35mm back box depth depending on wiring conditions and uses a screwless cover plate that clips onto a separate metal sub-frame. This means there are no visible screws or fixings on the wall once installed, giving a cleaner finish than traditional screw-fixed plates. The 13A rating handles standard UK appliance loads up to 3,120W per outlet. When both USB ports are in use simultaneously, the USB-C delivers 27W and the USB-A delivers 18W, totalling 45W of charging capacity.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish provides a neutral backdrop that pairs cleanly with contemporary, industrial and minimalist interiors. The black insert behind the matt black faceplate creates a monochromatic finish with no contrasting colours, giving a unified appearance on darker walls. The socket draws only 0.1W in standby mode when no USB devices are connected, meeting ErP energy-efficiency standards. Built-in protections include overload, overheat and over-current safeguards that prevent damage to connected devices during charging.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFastcharge\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5242650_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25-35mm back box depth is needed depending on wiring conditions. The screwless cover plate adds approximately 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output for each port?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe USB-C port delivers up to 45W when used alone, or 27W when both ports are in use simultaneously. The USB-A port delivers up to 18W. Both ports support PD (Power Delivery) and QC (Quick Charge) protocols for adaptive fast charging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat devices benefit from the fast-charge feature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDevices supporting PD or QC protocols benefit from fast-charge delivery, including most modern smartphones, tablets and USB-C laptops. Certified USB cables are recommended for optimal performance. Fast-charge typically operates within 0-70% battery capacity, reverting to standard charging beyond that point to protect battery longevity.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293680230667,"sku":"SFR9945MBB","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1337080_16a81f35-ca6b-4a6f-8403-fca5c5cd1004.jpg?v=1714662432"},{"product_id":"13a-2-gang-dp-switched-socket-with-automatic-nightlight-matt-black-screwless-black-insert","title":"13A 2 Gang DP Switched Socket With Automatic Nightlight - Matt Black Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang DP switched socket integrates an automatic nightlight positioned at the base of the screwless matt black faceplate. A built-in photocell sensor activates the 0.8W LED nightlight when ambient light drops below 5-15 lux and deactivates it when brightness exceeds 20-40 lux, providing hands-free orientation lighting without manual switches or timers.\u003c\/p\u003e\n\u003cp\u003eDesigned for hallways, children's bedrooms, hotel guest rooms and care home corridors, the socket combines mains power outlets with low-level safety lighting in a single wall fitting. The 55-lumen LED casts a soft 4000K neutral white glow along the skirting line, sufficient to navigate a dark hallway or locate the socket in low light without overwhelming a sleeping room. The dual-pole switching isolates both live and neutral when switched off, adding safety for high-draw appliances.\u003c\/p\u003e\n\u003cp\u003eThe screwless cover plate clips onto a separate steel sub-frame fixed to the back box, leaving no visible screws or fixings on the wall once installed. The matt black finish provides a low-sheen surface that minimises fingerprints and reflections, pairing cleanly with contemporary, industrial and minimalist interiors. The socket accepts mounting box depths between 25mm and 35mm depending on cable management requirements, with twin earth terminals for flexible wiring on installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e4000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e55 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e0.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e73.1 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5367072_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the nightlight activate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA built-in photocell sensor monitors ambient light levels. When brightness falls below 5-15 lux the LED nightlight switches on automatically. When light exceeds 20-40 lux it switches off. No manual intervention or timer settings are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket accepts mounting box depths between 25mm and 35mm depending on the cable volume and wiring layout. The screwless cover plate adds 7mm projection from the wall surface once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The matt black cover plate clips onto a separate steel sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without rewiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat colour temperature is the nightlight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integrated LED produces 55 lumens at 4000K, a neutral white that provides orientation without the warm yellow tone of traditional nightlights or the stark blue-white of some modern LEDs.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293681967371,"sku":"SFR9NLMBB","price":25.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1260462_bcf5db30-8d74-491a-9ceb-1ea143920eaa.jpg?v=1714662476"},{"product_id":"13a-1-gang-unswitched-socket-matt-black-screwless-black-insert","title":"13A 1 Gang Unswitched Socket - Matt Black Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang unswitched socket provides a single 13A outlet behind a matt black screwless faceplate with a matching black insert. The unswitched design means the outlet is permanently live once wired, making it suitable for appliances that need constant power — fridge-freezers, network routers, alarm systems — or locations where switching at the socket is not required.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and light commercial installation, the socket fits a standard 25mm minimum back box depth and uses a screwless cover plate that clips onto a separate metal sub-frame. This removes visible screws or fixings from the wall once installed, giving a cleaner finish than traditional screw-fixed plates. The 4.3mm projection from the wall keeps the profile low against skirting boards and in tight spaces behind furniture.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish is a powder-coated steel that resists fingerprints and surface scratching better than gloss black finishes, and pairs well with contemporary, industrial and minimalist interiors. The black insert behind the faceplate hides the back of the cover plate and gives a defined edge to the outlet aperture. A built-in gasket between the plate and the wall reduces dust ingress during installation and gives a tight seal against painted or wallpapered surfaces.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5742881_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.3mm of projection from the wall once fitted, making this one of the lowest-profile sockets in the Knightsbridge range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose an unswitched socket over a switched one?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnswitched sockets are permanently live once wired, making them suitable for appliances that need constant power without accidental switching — fridge-freezers, network equipment, alarm systems, and under-counter appliances. They also suit locations where switching happens at the appliance itself rather than the wall socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting or wallpapering around the socket and re-clipped without re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this screwless flat plate style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293688684811,"sku":"SFR7000UMB","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1504016_030752a6-5020-4760-8911-129a035afb72.jpg?v=1714662639"},{"product_id":"13a-2-gang-sp-switched-socket-dual-usb-a-usb-c-matt-black-screwless-black-insert","title":"13A 2 Gang SP Switched Socket Dual USB-A \u0026 USB-C - Matt Black Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang SP switched socket adds one USB-A and one USB-C charging port behind a matt black screwless faceplate with a black insert. The single-pole switching cuts the live line when the socket is turned off, making it suitable for standard domestic loads up to 13A per outlet. The dual USB ports share a 5V DC 4.0A output, providing fast-charge capability for modern devices via the USB-C port while retaining compatibility with older USB-A cables.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and light commercial installation, the socket fits a standard 25-35mm back box depth depending on cable routing. The screwless cover plate clips onto a separate metal sub-frame, eliminating visible fixings on the wall once fitted and creating a flat, minimalist profile with just 4.3mm projection from the wall surface. The matt black finish on premium-grade steel provides a hardwearing, non-reflective surface that resists fingerprints and pairs well with contemporary, industrial and monochrome interiors.\u003c\/p\u003e\n\u003cp\u003eThe black insert behind the faceplate creates a defined edge around each outlet aperture and hides the back of the cover plate, maintaining the clean monochrome aesthetic when viewed from any angle. The built-in gasket between the sub-frame and cover plate helps prevent dust ingress and creates a smooth transition to the wall. The matching black rockers complete the monolithic appearance, giving the socket a unified look rather than contrasting switch elements.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5743194_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed, though 35mm may be required depending on cable routing and the number of cables entering the box. The screwless cover plate adds just 4.3mm projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dual USB ports share a 5V DC 4.0A output. The USB-C port supports fast-charge protocols for modern smartphones and tablets, while the USB-A port maintains compatibility with older devices and cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The matt black cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without disturbing the wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between SP and DP switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSP (single-pole) switching cuts the live line only when the socket is turned off. DP (double-pole) switching cuts both live and neutral. SP switching is suitable for most domestic applications; DP is preferred for higher-draw appliances or commercial settings requiring additional isolation.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293693665547,"sku":"SFR9940MBB","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1527064_cdecc05d-e305-408f-9da9-14b54c062ecd.jpg?v=1714662713"},{"product_id":"5a-unswitched-round-pin-socket-matt-black-rounded-edge","title":"5A Unswitched Round Pin Socket - Matt Black Rounded Edge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge CL5AMB is a 5A unswitched round pin socket finished in matt black with a rounded edge metal faceplate. Certified to BS 546, the socket is designed for dedicated lighting circuits rather than general 13A power, making it the standard choice for table lamps, floor lamps and wall lights wired on a separate 5A circuit breaker.\u003c\/p\u003e\n\u003cp\u003eCommonly specified in custom lighting installations where table or floor lamps need a dedicated outlet without visible switching, the unswitched design means the lamp itself controls on\/off function. The rounded edge plate sits slightly proud of the wall with a built-in gasket that seals against the mounting box edge, giving a defined border and cleaner junction than flat plates. The 87.75mm square faceplate fits standard single-gang UK mounting boxes with a minimum 25mm depth.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish is powder-coated onto premium-grade steel, providing a low-sheen surface that resists fingerprints and light scratching better than painted or anodised finishes. The black insert behind the faceplate matches the exterior finish, hiding the internal terminals and back of the plate. The socket carries a 25-year manufacturer warranty, reflecting the durability of the metal construction and corrosion-resistant coating.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901298_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between a 5A socket and a standard 13A socket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e5A round pin sockets are designed for dedicated lighting circuits wired on a separate 5A circuit breaker, typically used for table lamps and floor lamps in traditional UK electrical installations. They use a different pin configuration than standard 13A rectangular-pin sockets and cannot accept standard UK plug types. Modern installations often use 13A sockets throughout, but 5A sockets remain specified in period properties, heritage restorations and custom lighting projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is this socket unswitched?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnswitched 5A sockets are used where the lamp itself provides on\/off control via its own switch, or where the circuit is controlled by a wall switch elsewhere in the room. This avoids the need for two switches in series and gives a cleaner plate design with fewer moving parts to fail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 25mm back box depth is needed for safe installation. The faceplate adds 7.5mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating means this socket is not rated for bathroom zones where moisture is present. For bathrooms, a socket rated IP44 or higher is required depending on zone placement.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293699793163,"sku":"CL5AMB","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1554026_a3e0d2fa-9a17-41f1-9c4d-78295d2b8873.jpg?v=1714662818"},{"product_id":"13a-1-gang-dp-switched-socket-matt-black-rounded-edge","title":"13A 1 Gang DP Switched Socket - Matt Black Rounded Edge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang DP switched socket features a matt black rounded edge faceplate with a black insert and matching metal rocker switch. The double-pole switching isolates both live and neutral lines when the socket is turned off, providing additional safety over single-pole switching for high-draw appliances such as washing machines, dishwashers and kettles.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and commercial installation, the socket fits a standard 25mm minimum back box depth and uses screw terminals for connection. The rounded edge profile softens the faceplate geometry compared to flat or squared designs, making the socket suitable for period properties, boutique hotel rooms and residential interiors where sharp angles are less appropriate. The 13A rating handles standard UK appliance loads up to 3,120W.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish is applied to premium-grade steel, giving the faceplate a low-sheen surface that resists fingerprints and minimises reflections under artificial light. The black insert behind the faceplate hides the back of the cover plate and gives a clean edge to the outlet aperture. The built-in gasket reduces dust ingress and provides a flush seal against the wall when fitted. The socket carries BS 1363:2 certification and a 25-year manufacturer warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901322_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The faceplate adds 7.5mm of projection from the wall once fitted, giving a total projection of approximately 32-33mm from the wall surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does double-pole switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDouble-pole (DP) switching isolates both the live and neutral conductors when the socket is switched off, rather than just the live. This provides additional safety when powering down high-draw appliances or when isolating the socket for maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the socket suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the socket is suitable for dry indoor locations only. Bathrooms require sockets with higher IP ratings (typically IP44 or above) and specific zone placement to comply with UK wiring regulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this rounded edge range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this rounded edge socket design in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293700284683,"sku":"CL7MBB","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1554050_ceb2b12d-70f5-49a2-a308-c372df5d39dc.jpg?v=1714662832"},{"product_id":"45a-dp-cooker-switch-with-13a-switched-socket-matt-black-with-neon-indicators","title":"45A DP Cooker Switch with 13A Switched Socket - Matt Black with Neon Indicators","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 45A DP cooker switch combines a 45-amp double-pole isolator for fixed cooking appliances with a 13A switched socket outlet below it, both behind a matt black steel faceplate with black inserts. The 45A switch carries two neon indicators that glow red when the switch is on, and the 13A socket has its own separate neon showing when that outlet is live.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchen installations where a cooker, range or hob needs isolation alongside a separate switched outlet for small appliances, the unit allows the high-load cooking appliance to be switched off for maintenance or cleaning while the 13A socket remains independently functional. The double-pole switching on the 45A side isolates both live and neutral lines when off, cutting all current to the cooker circuit. The 13A socket handles standard appliance loads up to 3,120W.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish is a premium-grade steel with a low-sheen coating that resists fingerprints better than gloss finishes and pairs cleanly with contemporary, industrial and monochrome kitchens. The unit requires a 47mm minimum back box depth and uses screw terminals for cable connection. The faceplate is fixed with two visible screws at top and bottom, positioned outside the live areas. The neon indicators draw minimal current and remain lit as long as the circuit is energised, providing a visual confirmation that the appliance is ready to heat.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e146.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901331_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cooking appliances can the 45A switch control?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 45A rating handles electric cookers, ranges and hobs up to 10,440W at 230V. Most domestic electric cookers fall within this range. The switch provides isolation for maintenance and prevents accidental activation during cleaning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is needed for safe installation. The faceplate adds 7.5mm projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do the neon indicators show?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe two red neon indicators on the 45A switch illuminate when that switch is on, confirming the cooker circuit is live. The 13A socket has a separate neon that illuminates when that outlet is switched on. The neons remain lit as long as the circuit is energised.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the 13A socket controlled by the 45A switch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The 13A socket operates independently with its own switch. You can turn off the 45A cooker circuit while the 13A socket remains functional, or vice versa.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293700907275,"sku":"CL83MNMBB","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1554072_ab8aef12-ed90-4632-ad4c-772832ca9e25.jpg?v=1714662847"},{"product_id":"dual-voltage-shaver-socket-115v-230v-matt-black-rounded-edge","title":"Dual Voltage Shaver Socket 115V\/230V - Matt Black Rounded Edge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge dual voltage shaver socket provides both 115V and 230V outputs behind a matt black rounded-edge steel faceplate. The socket is designed for bathroom installation, supplying power to electric shavers, toothbrushes and other grooming appliances that may require either voltage standard.\u003c\/p\u003e\n\u003cp\u003eRated IP41, the socket offers protection against solid objects larger than 1mm and vertically falling water droplets, making it suitable for bathroom zones where direct water spray is not present. The socket must be installed in accordance with BS 7671 wiring regulations for bathroom electrical installations. The 47mm minimum back box depth requirement accommodates the transformer and dual voltage output mechanism housed behind the faceplate.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish is a low-sheen powder-coated steel that resists fingerprints and bathroom moisture better than gloss finishes. The rounded-edge design sits 7.5mm proud of the wall once fitted, with edges radiused to soften the profile against tiled or painted surfaces. A built-in gasket between the faceplate and back box creates a seal that prevents moisture ingress during installation and use. The socket is certified to EN 61558 for transformer safety and carries a 25-year manufacturer warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e146.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e110\/230V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901340_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zones can this shaver socket be installed in?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP41 rating means the socket is suitable for Zone 2 and outside zones in a bathroom, where it is protected from direct water spray. It must not be installed in Zone 0 (inside a bath or shower) or Zone 1 (directly above a bath or shower to a height of 2.25m). Consult BS 7671 or a qualified electrician for your specific bathroom layout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 47mm back box depth is needed to house the internal transformer and dual voltage mechanism. Standard 35mm back boxes are too shallow for shaver sockets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this power a hairdryer or other high-wattage appliances?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Shaver sockets are designed for low-power grooming appliances only — electric shavers and toothbrushes. The label 'SHAVERS ONLY' on the faceplate indicates the socket must not be used for hairdryers, straighteners or other high-draw devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this rounded-edge shaver socket in multiple finishes including polished chrome, brushed chrome, polished brass, antique brass and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293701431563,"sku":"CL89MB","price":20.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1554080_1885e80b-ae34-49cd-95b9-f500b966933d.jpg?v=1714662853"},{"product_id":"shaver-socket-with-dual-usb-a-usb-c-matt-black","title":"Shaver Socket With Dual USB-A \u0026 USB-C - Matt Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge shaver socket provides a 230V AC 20VA shaver supply alongside dual USB charging ports (one USB-A, one USB-C) behind a matt black screwless faceplate. IP41 rated for use in bathroom zones where appropriate, the unit combines traditional shaver charging with modern device charging in a single fitting.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathroom installation in positions beyond 600mm from a bath or shower enclosure (Zone 2 or outside zones), the shaver socket supplies 230V AC power suitable for UK and European shavers and toothbrushes through a dedicated transformer. The dual USB ports share a combined 5V DC 2.4A output, allowing simultaneous charging of phones, tablets and other small devices while the shaver socket remains available for its primary purpose.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish on premium-grade steel gives the fitting a contemporary, low-reflectivity appearance that pairs with modern bathroom sanitaryware, matt black taps and shower fittings. The screwless low-profile design uses a cover plate that clips onto a separate sub-frame, eliminating visible fixings. A built-in gasket behind the faceplate provides the IP41 ingress protection rating. The 47mm minimum mounting box depth accommodates the transformer and USB charging circuitry.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e146.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901345_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP41 rating allows installation in bathroom Zone 2 or outside zones — typically 600mm or more from a bath or shower enclosure. It must not be installed within immediate reach of a person using a bath or shower (Zone 1 or Zone 0).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat output do the USB ports provide?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe USB-A and USB-C ports share a combined 5V DC 2.4A output. Both ports can be used simultaneously, but the 2.4A total is shared between connected devices rather than 2.4A per port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is needed to accommodate the shaver transformer and USB charging circuitry. The screwless cover plate adds 7.5mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the shaver socket suitable for both UK and European shavers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket supplies 230V AC through a standard two-pin shaver outlet, compatible with both UK and European shaver plugs. It does not accept standard three-pin UK mains plugs.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293701497099,"sku":"CL8909MB","price":42.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1554090_cb5e6093-c5bb-4f05-a90e-499756c44b18.jpg?v=1714662855"},{"product_id":"13a-2-gang-sp-switched-socket-dual-usb-a-usb-c-matt-black-rounded-edge","title":"13A 2 Gang SP Switched Socket Dual USB-A \u0026 USB-C - Matt Black Rounded Edge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang SP switched socket adds one USB-A and one USB-C charging port behind a matt black faceplate with rounded edges and matching black rockers. The single-pole switching isolates the live line when the socket is turned off, while the dual USB ports share a 5V 4.0A output for charging smartphones, tablets and other portable devices.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and office installation, the socket fits a standard 25-35mm back box depending on wiring configuration. The rounded edge design incorporates a built-in gasket that sits between the faceplate and the wall, creating a clean transition and reducing the visual gap typical of standard flat-edge plates. The 13A rating handles standard UK appliance loads up to 3,120W per outlet.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish is constructed from premium-grade steel and provides a contemporary accent that pairs well with dark-toned interiors, industrial schemes and modern minimalist spaces. The black insert behind the faceplate hides the back of the cover plate and gives a defined edge to each outlet aperture. The USB-C port supports modern fast-charge protocols, while the USB-A retains compatibility with older cables and devices. Both ports share the 4.0A output, so charging speed adjusts automatically depending on the number of devices connected.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e146.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901350_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25-35mm back box depth is needed depending on wiring configuration. The rounded edge plate with built-in gasket adds 7.5mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe USB-A and USB-C ports share a 5V 4.0A output. When charging two devices simultaneously, the 4.0A current is split between them. Fast-charge protocols are supported on the USB-C port for compatible devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between SP and DP switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSP (single-pole) switching isolates the live line only when the socket is turned off. DP (double-pole) switching isolates both live and neutral, providing additional safety for high-draw appliances. This is an SP model, suitable for general-purpose use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in the rounded edge range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces the rounded edge socket series in matt black, polished chrome, brushed chrome, polished brass, antique brass and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293701529867,"sku":"CL9940MBB","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1554104_adbc61d1-6990-4af3-b19b-3eed8fa233fe.jpg?v=1714662858"},{"product_id":"13a-2-gang-dp-switched-socket-matt-black-black-insert-rounded-edge","title":"13A 2 Gang DP Switched Socket - Matt Black (Black Insert, Rounded Edge)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang DP switched socket pairs a matt black rounded-edge metal faceplate with a black insert and matching rocker switches. The double-pole switching isolates both live and neutral lines when the socket is switched off, providing additional safety over single-pole designs for high-draw appliances.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and commercial installation, the socket fits a standard 25mm minimum back box depth and uses screw terminals for live, neutral and earth connections. The twin earth terminals offer flexibility for earthing continuity in multi-gang installations or daisy-chain wiring. The 13A rating handles standard UK appliance loads up to 3,120W per outlet.\u003c\/p\u003e\n\u003cp\u003eThe rounded-edge profile softens the visual weight of the plate compared to sharp-edged designs, while the matt black finish on premium-grade steel provides a low-reflection surface that pairs well with contemporary, industrial and minimal interiors. The black insert behind the faceplate hides the back of the cover plate and gives a defined edge to each outlet aperture, maintaining a monochromatic finish when the socket is in use. The integrated gasket between the plate and the wall creates a clean edge seal.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e85.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e146.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901352_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The faceplate adds 7.5mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does double-pole switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDouble-pole switches isolate both the live and neutral lines when switched off, providing additional safety compared to single-pole switches that only break the live connection. This is useful for appliances that remain plugged in when not in use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are twin earth terminals used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwin earth terminals allow two earth wires to be connected independently, which is useful for maintaining earthing continuity in multi-gang installations or when daisy-chaining sockets in a circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this rounded-edge design in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293701595403,"sku":"CL9MBB","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1554116_ea496a91-c180-4b3b-85f4-2eccd8a22cba.jpg?v=1714662860"},{"product_id":"13a-1-gang-sp-switched-socket-dual-usb-a-usb-c-matt-black-rounded-edge-black-insert","title":"13A 1 Gang SP Switched Socket Dual USB-A \u0026 USB-C - Matt Black Rounded Edge (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge CL9919MBB is a 13A 1-gang single-pole switched socket with integrated USB-A and USB-C fast charge ports, housed in a matt black rounded edge faceplate with a black insert. The socket delivers up to 18W per USB port individually or a shared 20W total output at 5V DC, 4.0A when both ports are in use simultaneously. Fast charge protocols (PD and QC) enable compatible devices to reach 0-50% battery in approximately 30 minutes.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and light commercial installation, the socket fits a 35mm minimum back box depth and includes a 10mm spacer to accommodate shallower mounting depths where standard boxes cannot be retrofitted. The single-pole switching isolates the live line when the socket is switched off, providing standard safety for everyday appliance use up to the 13A rating (3,120W maximum load). The rounded edge design softens the profile against walls and reduces sharp corners in high-traffic areas.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish provides a low-sheen surface that resists fingerprints and blends with industrial, contemporary and monochrome interiors. The black insert behind the faceplate conceals the back of the cover plate and gives a defined edge to each outlet and USB aperture. Built-in protection against overload, overheat and over-current events safeguards connected devices, and the socket automatically moderates charging rate once device batteries exceed 70% to preserve long-term battery health. Stand-by consumption sits at 0.1W, meeting ErP energy efficiency guidelines.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901354_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 35mm minimum back box depth is needed for safe installation. A 10mm spacer is included with the socket to accommodate shallower mounting depths where standard boxes cannot be retrofitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket provides up to 18W per USB port individually, or a shared 20W total output at 5V DC, 4.0A when both USB-A and USB-C ports are in use simultaneously. Fast charge protocols (PD and QC) are supported for compatible devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between single-pole and double-pole switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSingle-pole (SP) switching isolates the live line only when the socket is switched off, while double-pole (DP) isolates both live and neutral. SP switching is standard for most residential and light commercial use; DP provides additional safety for high-draw appliances or environments requiring stricter isolation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in the rounded edge range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces the rounded edge socket range in multiple finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293701660939,"sku":"CL9919MBB","price":38.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1554102_2a4f6218-6468-459e-8119-866738a2ab40.jpg?v=1714662862"},{"product_id":"13a-2-gang-dp-switched-socket-dual-usb-a-usb-c-matt-black-rounded-edge-black-insert","title":"13A 2 Gang DP Switched Socket Dual USB-A \u0026 USB-C - Matt Black Rounded Edge (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang DP switched socket adds one USB-C port (up to 45W) and one USB-A port (up to 18W) behind a matt black rounded-edge faceplate with a black insert. The dual-pole switching isolates both live and neutral lines when the socket is switched off, providing additional safety over single-pole switching for high-draw appliances. The USB-C port supports Power Delivery (PD) and Quick Charge (QC) protocols, delivering 0-50% charge in under 30 minutes for compatible devices.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and office installation, the socket fits a standard 25mm minimum back box depth (up to 35mm depending on wiring conditions) and uses a screw-fixed rounded-edge cover plate made from premium grade steel. The 13A rating handles standard UK appliance loads up to 3,120W per outlet. The USB ports provide simultaneous fast charging — 27W over USB-C and 18W over USB-A when both are in use — making the socket suitable for charging laptops, tablets and phones at the same time.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish provides a low-sheen surface that minimises fingerprints and pairs with contemporary, industrial and monochrome interiors. The black insert behind the matt black faceplate creates a tonal continuity across the wall plate and hides the back of the cover. The socket carries IP20 rating, Over Voltage Category III compliance, and built-in protection against overload, overheat and overcurrent. ErP Ready design consumes only 0.1W in standby mode.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e146.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901356_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 25mm back box depth is needed, though up to 35mm may be required depending on the number of cables and the tightness of the installation. The rounded-edge cover plate adds 7.5mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe USB-C port delivers up to 45W (suitable for laptops and tablets) and the USB-A delivers up to 18W. When both ports are in use simultaneously, the socket provides 27W over USB-C and 18W over USB-A. Both ports support Power Delivery (PD) and Quick Charge (QC) protocols.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes fast charging work on all devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFast charging works on devices that support PD or QC protocols and are charged with certified USB cables. The adaptive charging technology adjusts power delivery to match the device's capability. Fast charge is most effective between 0-70% battery capacity, after which the device switches to standard charging to protect battery health.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293701726475,"sku":"CL9945MBB","price":52.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1554106_a59e457f-ceb2-45ff-93ae-0d7276c26364.jpg?v=1714662864"},{"product_id":"13a-2-gang-dp-key-lockable-socket-matt-black-rounded-edge","title":"13A 2 Gang DP Key Lockable Socket - Matt Black Rounded Edge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge 13A 2-gang DP key lockable socket adds on\/off locking control to each outlet via a rotating keyswitch mechanism. The socket can be locked in either the on or off position using one of the two supplied keys, preventing unauthorised access to mains power in communal areas, student accommodation, hotel rooms and shared commercial spaces. The double-pole switching isolates both live and neutral lines when the socket is switched off.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation in corridors, communal kitchens, workspace hot-desking areas and any setting where controlled access to electricity is required, the socket fits a standard 25mm minimum back box depth. The rounded-edge plate sits 7.5mm proud of the wall once fitted and uses visible screw fixings. The matt black finish provides a contemporary alternative to chrome or brass in modern commercial interiors and higher-spec residential developments.\u003c\/p\u003e\n\u003cp\u003eThe premium-grade steel construction carries a 25-year warranty and an IP20 rating for indoor use. The black insert behind the matt black faceplate creates a monochrome look that hides the back of the plate apertures. Each outlet is rated at 13A on 230V mains, handling standard UK appliance loads up to 3,120W per socket. The keyswitch rotates through approximately 90 degrees between locked and unlocked positions, with tactile resistance confirming the lock has engaged.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e146.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901741_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan the socket be locked in the on or off position?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The keyswitch mechanism allows the socket to be locked in either position. This means power can be locked on to prevent tampering, or locked off to prevent unauthorised use. Two keys are supplied with each socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The plate projects 7.5mm from the wall once fitted, giving a total projection of approximately 32.5mm from a flush back box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the socket suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating is for indoor use only. For outdoor or bathroom installations where moisture is present, a higher IP-rated product is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces key lockable sockets in a range of finishes including polished chrome, brushed chrome, polished brass and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293702316299,"sku":"CL9LOCKMB","price":25.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1554112_5c1ef13b-f945-4a34-b05d-1bf792839ffa.jpg?v=1714662884"},{"product_id":"13a-2-gang-sp-switched-socket-dual-usb-a-usb-c-black-nickel-screwless-black-insert","title":"13A 2 Gang SP Switched Socket Dual USB-A \u0026 USB-C - Black Nickel Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang SP switched socket adds one USB-A and one USB-C charging port behind a black nickel screwless faceplate with a black insert. The single-pole switching isolates the live line when the socket is switched off, with each outlet rated at 13A for standard UK appliance loads up to 3,120W.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and office installation, the socket fits a standard 25-35mm back box depth depending on wiring conditions and uses a screwless cover plate that clips onto a separate metal sub-frame. This means there are no visible screws or fixings on the wall once installed, giving a cleaner finish than traditional screw-fixed plates. The USB ports share a 5V DC 4A output, delivering simultaneous charging for two devices.\u003c\/p\u003e\n\u003cp\u003eThe black nickel finish is a dark gunmetal tone that sits between polished chrome and matt black, providing a contemporary accent that pairs well with industrial, modern and monochrome interiors. The black insert behind the faceplate hides the back of the cover plate and gives a defined edge to each outlet aperture. The USB-C port supports modern fast-charge protocols, while the USB-A retains compatibility with older cables and devices.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6076543_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for most installations, but up to 35mm may be required depending on wiring conditions and the number of cables entering the back box. The screwless cover plate adds approximately 4mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe USB ports share a 5V DC 4A output. When both ports are in use, the total current is divided between the connected devices. The USB-C port supports fast-charge protocols where the connected device is compatible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between SP and DP switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSP (single-pole) switches isolate only the live line when turned off. DP (double-pole) switches isolate both live and neutral, providing additional safety for high-draw appliances. For standard domestic use, SP switching is sufficient.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293712703755,"sku":"SFR9940BN","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1665386_d6168238-f0d1-4ea9-9f4b-87ea8dfc80d0.jpg?v=1714663036"},{"product_id":"13a-pop-up-socket-with-10w-wireless-charger-dual-usb-a-usb-c-black","title":"13A Pop Up Socket With 10W Wireless Charger \u0026 Dual USB-A USB-C - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge pop-up socket combines a 13A mains outlet, a 10W Qi wireless charging pad, and dual USB ports (one USB-A, one USB-C) in a single retractable unit that fits into an 80mm desk grommet. The wireless charging pad sits flush with the top surface when the unit is raised, supporting Qi-compatible devices including modern smartphones and earbuds at up to 10W charging speed.\u003c\/p\u003e\n\u003cp\u003eDesigned for desk installations in home offices, co-working spaces, hotel rooms and kitchen worktops, the unit retracts when not in use to keep the work surface clear. The recessed depth of 149.8mm requires a minimum void of 160mm beneath the desk surface to accommodate the mechanism and cable entry. The aluminium housing in matt black finish pairs with modern and industrial desk designs, while the integrated wireless pad removes the need for separate charging cables for compatible devices.\u003c\/p\u003e\n\u003cp\u003eThe USB-C port supports Power Delivery (PD) protocol and delivers up to 30W output, suitable for fast-charging laptops, tablets and smartphones that support the standard. The USB-A port supports Quick Charge (QC) and delivers up to 18W. A 2m power cable with a fitted BS plug top is supplied, allowing the unit to be connected to a standard UK socket without additional wiring. The wireless charging pad operates at 5V 2A or 9V 1.1A depending on device compatibility, with an effective charging distance of 2-5mm, meaning most phone cases do not need to be removed for charging to work.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e149.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e103.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e77.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e149.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e2 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFastcharge\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6205449_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat desk thickness and void depth is required for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unit fits standard 80mm desk grommet cut-outs and requires a minimum 160mm void beneath the desk surface to accommodate the retracted mechanism and cable entry. Desk thickness between 20-50mm is typical for safe installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the wireless charger work through phone cases?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Qi wireless charging pad has an effective charging distance of 2-5mm, so most standard phone cases do not need to be removed. Thick cases, metal cases or cases with card holders may block charging and should be removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat devices are compatible with the USB-C fast-charge port?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe USB-C port supports Power Delivery (PD) protocol and delivers up to 30W at 20V 1.5A, making it compatible with laptops, tablets and smartphones that support USB-C PD fast-charging. Note that iPhone 15 models are not compatible with this port for charging — use the wireless pad or USB-A port instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the unit hardwired or does it use a plug?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unit is supplied with a 2m power cable and a fitted BS plug top, allowing it to be connected to any standard UK 13A socket. It does not require hardwiring or an electrician for installation, making it suitable for rental properties and temporary desk setups.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293724336395,"sku":"SK0016","price":90.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1630762_01dad0c6-d70f-4881-8ea9-6fe6ab92b9be.jpg?v=1714663288"},{"product_id":"13a-1-gang-unswitched-socket-module-50-x-50mm-black-insert","title":"13A 1 Gang Unswitched Socket Module 50 x 50mm - Black Insert","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang unswitched socket module is a 50 x 50mm component designed for euro-module faceplate systems, allowing bespoke electrical layouts in kitchens, offices and commercial installations. The module carries a 13A rating on 230V mains and is certified to BS 1363, providing a standard UK three-pin socket without a built-in switch — switching is controlled elsewhere in the circuit or by the appliance itself.\u003c\/p\u003e\n\u003cp\u003eDesigned for modular grid systems where faceplates hold multiple socket, switch and data modules in a single frame, this module clips into a euro-module mounting frame and sits behind a compatible faceplate. The black insert behind the socket aperture provides contrast against lighter-coloured faceplates or matches matt black and graphite finishes. The recessed depth of 28mm requires a minimum 35mm mounting box, allowing clearance for cable runs and rear terminations.\u003c\/p\u003e\n\u003cp\u003eConstructed from ABS with an IP20 rating, the module is suitable for dry indoor locations. The earth terminal is present and the socket accepts standard UK plugs. The unswitched configuration is often preferred in installations where appliances are plugged in semi-permanently (under-counter fridges, office printers, built-in kitchen appliances) and switching is either not required or handled by a separate isolator switch in the same grid assembly.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e28 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1665160_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounting box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 35mm mounting box depth is needed. The module itself has a recessed depth of 28mm, with the remaining clearance allowing for cable runs and rear terminations within the box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this module be used on its own?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a euro-module component that must be fitted into a compatible euro-module mounting frame and faceplate. The faceplate holds one or more 50 x 50mm modules in a single grid assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is the socket unswitched?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnswitched sockets are often used for semi-permanent appliances (fridges, printers, built-in kitchen equipment) where switching is either not needed or handled by a separate isolator switch in the same grid assembly. This allows more flexible circuit design in modular installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other modules are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces a wide range of 50 x 50mm euro-modules including switched sockets, data outlets, USB charging ports, dimmer modules and blank plates. Use the search function or filters to find compatible modules and faceplates in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293905281291,"sku":"NET13BK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/110636_8fc76520-db1b-4e03-b537-6319efb86116.jpg?v=1714665972"},{"product_id":"5a-unswitched-round-socket-module-50-x-50mm-black","title":"5A Unswitched Round Socket Module 50 x 50mm - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 5A unswitched round socket module is a 50 x 50mm modular power outlet designed for euro-module faceplate systems. The module features a round three-pin BS 546 socket rated at 5A on 230V mains, with an earth terminal and IP20 protection against solid objects larger than 12.5mm.\u003c\/p\u003e\n\u003cp\u003eDesigned for modular installations where different socket types, switches, data ports and media connections need to be combined on a single faceplate, the module fits standard 50 x 50mm euro-module grids and requires a minimum 25mm back box depth. The unswitched design means the socket is permanently live when wired in, making it suitable for appliances that need continuous power or where the on\/off control is on the appliance itself rather than the wall.\u003c\/p\u003e\n\u003cp\u003eThe matt black ABS construction matches other modules in the Knightsbridge Grid range, allowing consistent finish across mixed-function faceplates. The 5A rating handles lighting circuits, small appliances, and devices drawing up to 1,150W, making it suitable for table lamps, phone chargers, radios, and similar low-draw equipment rather than high-power appliances like kettles or heaters.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e26 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3002547_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a BS 546 socket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBS 546 is the British Standard for round-pin plugs and sockets, commonly used for lighting circuits and low-draw appliances. This 5A version has three round pins in a triangular configuration and includes an earth connection. It differs from the more common BS 1363 13A rectangular-pin sockets used for standard UK mains outlets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used with standard UK plugs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This socket accepts only BS 546 round-pin plugs. Standard UK appliances with rectangular BS 1363 plugs cannot be used with this socket without an adapter. It is typically specified for lighting circuits or specialist equipment that requires a 5A round-pin outlet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat faceplate is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module requires a separate euro-module grid faceplate that accepts 50 x 50mm modules. Knightsbridge offers compatible grid plates in various finishes and configurations (single, double, triple, quad) that clip onto a metal frame fixed to the back box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the socket always live?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The module is unswitched, meaning the socket is permanently live when wired in. If on\/off control is needed, use a switched module variant or control power at the consumer unit or via a switched fused spur.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293905805579,"sku":"NET5ABK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190582_608a6e66-3b9e-46ec-ad65-0f0356a45de2.jpg?v=1714665990"},{"product_id":"ip66-13a-1-gang-dp-switched-socket-with-neon-black-outdoor","title":"IP66 13A 1 Gang DP Switched Socket with Neon - Black Outdoor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP66 outdoor socket is a 13A 1-gang double-pole switched socket with a neon indicator built into a weatherproof black polycarbonate enclosure. The neon glows red when the socket is switched on, visible through the transparent hinged lid even when closed, providing a visual confirmation of live power without needing to open the cover.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor installation on garage walls, garden shed exteriors, patios and driveways, the IP66 rating protects the socket from water jets and dust ingress. The hinged lid stays open at 90 degrees when propped, allowing temporary or continuous use without holding it, and the wide cable channels inside the casing accommodate thick over-moulded strain reliefs commonly found on outdoor extension leads and power tools. Multiple 20mm conduit entry points around the base allow flexible cable routing depending on wall position.\u003c\/p\u003e\n\u003cp\u003eThe enclosure measures 153mm high, 110mm wide and projects 84mm from the wall when surface-mounted. The polycarbonate construction is rated IK06 for impact resistance, suitable for locations where the socket may be knocked or struck by garden equipment. The double-pole switching isolates both live and neutral lines when off, providing additional safety over single-pole switching for outdoor circuits. The socket is certified to BS 1363-2 and carries a 2-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e153 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1881398_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_827716.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP66 mean for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP66 means the socket is protected against powerful water jets from any direction and is completely dust-tight. It can be installed on external walls exposed to heavy rain and garden hose spray, but is not suitable for full submersion or permanent exposure to standing water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the lid be left open during use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The hinged lid holds itself open at 90 degrees when propped, allowing a plug to remain inserted and the socket to be used continuously without needing to hold the lid or remove the plug each time it closes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable entry options are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe enclosure provides multiple 20mm conduit entry points around the base, allowing the supply cable to enter from below, from either side, or from the rear depending on the installation position and routing requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the neon indicator work when the lid is closed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The neon is visible through the transparent smoked lid, so you can see whether the socket is switched on without opening the cover. This is particularly useful in wet conditions when you want to confirm power status before exposing the internal socket.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293916422411,"sku":"OP7N","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/233298_7ec6ce79-f508-4993-8a30-b963eb72017f.jpg?v=1714666211"},{"product_id":"smart-ip66-13a-2-gang-outdoor-socket-black","title":"Smart IP66 13A 2 Gang Outdoor Socket - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Smart IP66 13A 2 Gang Outdoor Socket is a weatherproof Wi-Fi controlled socket rated IP66\/IK08 for permanent outdoor installation. The socket provides two independently switched 13A outlets behind a hinged polycarbonate cover with a gasket seal, allowing control of outdoor lighting, water features, pond pumps and seasonal decorations either manually at the socket or remotely via smartphone using the SmartKnight or Smartlife apps.\u003c\/p\u003e\n\u003cp\u003eDesigned to replace a standard 2-gang outdoor switched socket where smart control is needed, the unit connects to 2.4GHz Wi-Fi networks and integrates with Amazon Alexa, Google Assistant and SIRI Shortcuts for voice control. The timer function allows scheduled switching for items like garden lighting to turn on at dusk and off at dawn, or festive lighting to operate on a set pattern. Power monitoring within the app shows real-time consumption for each outlet, useful for tracking usage of pumps or heaters.\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate construction and IP66 rating protect the socket against heavy rain, dust ingress and low-pressure water jets, making it suitable for external walls, garden outbuildings, patios and garage exteriors. The IK08 impact rating gives resistance to knocks from garden tools or wheelbarrows. The socket measures 153mm high by 170mm wide with an 84mm projection from the wall when the cover is closed. Standby power consumption is 0.8W, comparable to a phone charger left plugged in.\u003c\/p\u003e\n\u003cp\u003eThe socket is not rated for EV charging and should not be used with electric vehicle charge points. The 13A rating handles standard UK outdoor appliances up to 3,120W per outlet. The 2-year warranty covers the electronic control circuit and the mechanical switching components.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e153 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e170 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2327661_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1171966.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat Wi-Fi network does it connect to?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket connects to 2.4GHz Wi-Fi networks only (IEEE802.11b\/g\/n). It does not support 5GHz networks. Range depends on your router signal strength and any obstacles between the socket and the router.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I control each outlet independently?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Both 13A outlets can be switched independently via the app or voice control, allowing you to schedule or control two different devices separately from a single socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for EV charging?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This socket is not rated for electric vehicle charging and must not be used with EV charge points. Use only with standard outdoor appliances within the 13A rating per outlet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP66 and IK08 mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP66 means the socket is fully dust-tight and protected against heavy rain and low-pressure water jets. IK08 means it can withstand impacts of 5 joules, roughly equivalent to a 1.7kg object dropped from 30cm, giving resistance to knocks from garden equipment.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293916520715,"sku":"OP9KW","price":42.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/330472_9f8a3132-e8e2-4561-81bd-36b1294b6886.jpg?v=1714666213"},{"product_id":"ip66-13a-2-gang-dp-switched-socket-with-neon-indicators-black-weatherproof","title":"IP66 13A 2 Gang DP Switched Socket with Neon Indicators - Black Weatherproof","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP66 13A 2-gang DP switched socket is a weatherproof outdoor socket with two independently switched outlets, each rated at 13A. Red neon indicators behind each switch confirm power status and remain visible through the transparent hinged lid when closed. The double-pole switching isolates both live and neutral lines when each outlet is switched off.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor installation on garden walls, sheds, garages, patios and caravan pitches, the socket withstands rain, dust and hose spray under IP66 certification. The hinged lid includes a hold-open catch for continuous access during use, and the polycarbonate casing is rated IK06 for impact resistance. Multiple 20mm cable entry points around the back and sides allow flexible positioning for surface or wall mounting.\u003c\/p\u003e\n\u003cp\u003eThe black polycarbonate body measures 170mm wide by 153mm high with an 84mm projection from the wall when surface-mounted. The transparent smoked front allows the neon indicators to be read without opening the lid, confirming whether each outlet is live. The socket is certified to BS 1363-2 for UK mains use at 230V 50Hz. This product is not suitable for EV charging.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e153 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e170 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1881391_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_827718.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP66 mean for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP66 certification means the socket is fully protected against dust ingress and can withstand powerful water jets from any direction. This makes it suitable for outdoor wall mounting exposed to rain, garden hoses and vehicle washing spray. The socket is not submersible and should not be installed in areas prone to flooding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I see if the socket is on without opening the lid?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each of the two switches has a red neon indicator that remains visible through the transparent smoked lid when closed, confirming whether that outlet is live without needing to open the cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the lid stay open during use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe hinged lid includes a hold-open catch that locks it in the open position while plugs are in use. This prevents the lid from closing on cables or blocking access during extended operation of outdoor equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for electric vehicle charging?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This socket is explicitly not suitable for EV charging. Electric vehicle chargers draw sustained high current over multiple hours, which requires dedicated EV-rated equipment beyond the scope of a standard 13A weatherproof outlet.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293916684555,"sku":"OP9N","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/233266_b8155c17-e33f-47c2-aec5-680bdc253b9e.jpg?v=1714666216"},{"product_id":"5a-unswitched-round-pin-socket-black-nickel-screwless-black-insert","title":"5A Unswitched Round Pin Socket - Black Nickel Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 5A unswitched round pin socket is designed for dedicated lighting circuits and lower-power appliances that use a 5A round pin plug rather than the standard 13A rectangular plug. The socket sits behind a black nickel screwless faceplate with a black insert and a low-profile design that projects just 4.3mm from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003eUsed primarily for table lamps and floor lamps wired to a dedicated lighting circuit, the 5A round pin configuration allows these lamps to be controlled separately from the main ring circuit. This is common in period properties, hotels, and high-specification residential installations where lighting circuits are separate from appliance circuits. The unswitched design means the socket is always live when the circuit is energised, with control at the lamp switch or wall-mounted dimmer.\u003c\/p\u003e\n\u003cp\u003eThe screwless cover plate clips onto a separate steel sub-frame fixed to the back box, leaving no visible fixings on the wall. The black nickel finish provides a dark gunmetal tone that pairs well with industrial, contemporary and dark-toned interiors. The built-in gasket between the cover plate and sub-frame gives a flush finish and prevents the plate from rattling once fitted. Certified to BS 546, the socket requires a minimum 25mm back box depth and carries a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1346269_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1291200.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a 5A round pin socket used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e5A round pin sockets are used primarily for table lamps and floor lamps on dedicated lighting circuits, common in period properties and high-specification installations where lighting is separate from the main 13A ring circuit. They accept a three-pin round plug, not the standard UK rectangular plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this socket be used with a dimmer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket itself is unswitched and does not have dimmer functionality. Dimming control would typically be provided by a separate wall-mounted dimmer switch on the same circuit, or by a dimmer built into the lamp itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 25mm back box depth is needed. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate steel sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293936771339,"sku":"SF5ABN","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/104040_9f363dd7-c7c8-41eb-a5fd-25312f376158.jpg?v=1714666473"},{"product_id":"5a-unswitched-round-pin-socket-matt-black-screwless","title":"5A Unswitched Round Pin Socket - Matt Black Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 5A unswitched round pin socket is built for lighting circuits and specialist low-current applications, certified to BS 546. The matt black screwless faceplate measures 87.5mm square with a 4.3mm projection from the wall, sitting almost flush once fitted. A built-in gasket behind the faceplate forms a seal between the cover and the mounting box, reducing dust ingress and improving IP20 performance.\u003c\/p\u003e\n\u003cp\u003eRound pin 5A sockets are typically used for dedicated lighting circuits where a separate control system or dimmer handles switching, making the unswitched socket the correct fitting. This is common in hospitality lighting installations, residential accent lighting controlled via wall-mounted dimmers or smart systems, and custom architectural lighting where the fixture itself contains the switch. The socket fits a standard 25mm minimum depth UK back box and uses a screwless cover plate that clips onto a separate metal sub-frame.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish is applied over premium-grade steel, giving a low-sheen surface that resists fingerprints better than gloss black and pairs cleanly with contemporary, industrial and monochrome interiors. The black insert behind the faceplate hides the back of the cover plate and creates a defined edge around the round pin aperture. Knightsbridge backs this fitting with a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1346280_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1291212.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between a 5A and a 13A socket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 5A socket is rated for lower current loads and uses a different round pin configuration (BS 546) compared to the standard UK 13A rectangular pin socket (BS 1363). 5A sockets are typically used for lighting circuits and specialist applications, not general appliances.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy would I use an unswitched socket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnswitched sockets are used where switching is handled elsewhere in the circuit — typically by a wall dimmer, smart lighting controller, or a switch within the light fitting itself. This is common in dedicated lighting installations where the socket needs to remain permanently live.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293936804107,"sku":"SF5AMB","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/105982_9a20225f-4f18-4c7c-aad8-49f1a003bf76.jpg?v=1714666476"},{"product_id":"dual-voltage-shaver-socket-115v-230v-black-nickel-screwless-black-insert","title":"Dual Voltage Shaver Socket 115V\/230V - Black Nickel Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge dual voltage shaver socket provides both 115V and 230V AC output at 20VA through a single black nickel screwless faceplate with a black insert. The socket features a voltage selector switch allowing users to choose between UK 230V and international 115V settings, making it compatible with electric shavers, toothbrushes and other low-wattage grooming devices from different markets.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathroom installation zones 2 and 3, the socket carries an IP41 rating achieved through a built-in gasket between the cover plate and the back box. The screwless cover plate clips onto a separate metal sub-frame, leaving no visible fixings on the wall once fitted. The 47mm minimum back box depth requirement suits most bathroom partition walls and plasterboard installations without requiring additional depth for moisture protection.\u003c\/p\u003e\n\u003cp\u003eThe black nickel finish provides a dark gunmetal tone that sits between polished chrome and matt black, pairing well with contemporary bathroom fittings in graphite, charcoal and black finishes. The premium-grade steel construction and EN 61558 certification ensure the socket meets UK safety standards for isolation transformers used in bathroom environments. The 25-year warranty covers manufacturing defects and component failure under normal residential use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e43.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1192517_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292262.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between 115V and 230V output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe selector switch allows you to choose between UK standard 230V (for UK-market shavers and toothbrushes) and international 115V (for devices purchased in North America or other 110-120V markets). The socket isolates both voltages from the mains supply through an internal transformer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be installed in a bathroom shower zone?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP41 rating makes this socket suitable for bathroom zones 2 and 3 (outside the shower enclosure and at least 600mm from the edge of a bath). It should not be installed in zone 0 or 1 (inside the shower or directly above a bath). Consult Part P Building Regulations or a qualified electrician for zone-specific guidance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The black nickel cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for tiling or painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this dual voltage shaver socket in finishes including polished chrome, brushed chrome, polished brass, matt black and white. Use the search function or category filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293946896651,"sku":"SF8900BN","price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/100782_aa5325c3-fdb3-4030-a7e8-e6ef5a8961b5.jpg?v=1714666614"},{"product_id":"dual-voltage-shaver-socket-115v-230v-matt-black-screwless","title":"Dual Voltage Shaver Socket 115V\/230V - Matt Black Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge dual voltage shaver socket provides both 115V and 230V outputs at 20VA, allowing use with UK and international shavers and electric toothbrushes behind a matt black screwless faceplate. The IP41 rating provides protection against solid objects over 1mm and dripping water, making it suitable for bathrooms outside the immediate shower enclosure zones.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential bathroom installation, the socket fits a standard 47mm minimum back box depth and uses a screwless cover plate that clips onto a separate metal sub-frame. The dual voltage outputs are selected automatically based on which shaver plug is inserted — there is no manual voltage switch. The integrated gasket between the faceplate and sub-frame provides the IP41 environmental protection.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish on the steel faceplate gives a low-sheen surface that pairs well with matt black taps, shower fittings and towel rails in contemporary bathroom schemes. The screwless design hides all fixings behind the clipped cover plate, giving a flush finish with no visible fasteners. The socket is EN 61558 certified and carries a 25-year warranty from Knightsbridge.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e43.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1192598_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292278.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the dual voltage work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket automatically detects and provides the correct voltage based on which plug is inserted. A 115V shaver draws 115V; a 230V shaver draws 230V. There is no manual voltage selector switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can this be installed in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP41 rating makes it suitable for bathrooms outside the immediate shower enclosure zones (typically zones 0, 1 and 2 as defined by BS 7671). It should be positioned at least 600mm from a bath edge or shower tray and not directly above a bath or sink where splashing occurs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is needed. The screwless cover plate adds 4.3mm of projection from the wall once clipped onto the sub-frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for electric toothbrushes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided the toothbrush charging base draws no more than 20VA and uses either a 115V or 230V rated charger. Most electric toothbrush chargers are designed for continuous use on shaver sockets.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293947748619,"sku":"SF8900MB","price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/100784_2df5bec1-0383-41fc-8926-3465a106642d.jpg?v=1714666617"},{"product_id":"13a-1-gang-dp-switched-socket-black-nickel-screwless-black-insert","title":"13A 1 Gang DP Switched Socket - Black Nickel Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang DP switched socket features a black nickel screwless faceplate with a black insert, providing a single 13A outlet with double-pole switching. The screwless cover plate clips onto a separate steel sub-frame, leaving no visible fixings on the wall once installed. The black nickel finish is applied to premium-grade steel, giving the plate durability and a dark, reflective metallic tone.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and commercial installation where a darker metallic accent is needed, the socket fits a standard 25mm minimum back box depth and uses twin earth terminals for straightforward wiring. The double-pole switching isolates both live and neutral lines when the socket is switched off, providing additional safety over single-pole switching for high-draw appliances. The 13A rating handles standard UK appliance loads up to 2,990W per outlet.\u003c\/p\u003e\n\u003cp\u003eThe black nickel finish sits between gunmetal and polished chrome in appearance, offering a darker metallic accent that pairs with contemporary, industrial and monochrome interiors. The black insert behind the faceplate hides the back of the cover plate and gives a defined edge to the outlet aperture. The 4.3mm projection from the wall keeps the socket low-profile once fitted, and a built-in gasket between the plate and the wall provides a clean junction line. Knightsbridge backs this socket with a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1792428_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292874.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.3mm of projection from the wall once fitted, giving a combined depth of approximately 29.3mm from the wall surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate steel sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does double-pole switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDouble-pole (DP) switching isolates both the live and neutral lines when the socket is switched off, providing additional safety over single-pole switching which only isolates the live. This is particularly useful for high-draw appliances like washing machines or dishwashers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293950238987,"sku":"SFR7000BN","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/118422_806f9a70-dd39-4c31-a9ae-d502c1c9e693.jpg?v=1714666651"},{"product_id":"13a-1-gang-dp-switched-socket-matt-black-screwless-black-insert","title":"13A 1 Gang DP Switched Socket - Matt Black Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang DP switched socket delivers a single 13A outlet behind a matt black screwless faceplate with a matching black insert and rocker. The double-pole switching isolates both live and neutral lines when the socket is switched off, providing additional safety over single-pole switching for high-draw appliances.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and office installation, the socket fits a standard 25mm minimum back box depth and uses a screwless cover plate that clips onto a separate metal sub-frame. This means there are no visible screws or fixings on the wall once installed, giving a cleaner finish than traditional screw-fixed plates. The 13A rating handles standard UK appliance loads up to 3,120W.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish provides a low-sheen surface that minimises fingerprints and pairs well with industrial, contemporary and dark-toned interiors. The black insert behind the faceplate hides the back of the cover plate and gives a defined edge to the outlet aperture. The premium-grade steel construction, twin earth terminals and IP20 rating make the socket suitable for dry indoor locations including living rooms, bedrooms, kitchens and offices.\u003c\/p\u003e\n\u003cp\u003eBuilt to BS 1363:2 standards and backed by a 25-year manufacturer warranty, the socket's 87.5mm square footprint and 4.3mm projection keep the profile tight to the wall. The built-in gasket ensures a flush fit against plaster and painted surfaces.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2539737_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292896.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the 25-year warranty cover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 25-year manufacturer warranty covers defects in materials and workmanship under normal use. This does not cover damage from incorrect installation, overloading, or exposure to moisture beyond the IP20 rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293950271755,"sku":"SFR7000MBB","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/155570_1943aacb-ae38-44f0-9be2-c5379dce8dff.jpg?v=1714666654"},{"product_id":"45a-dp-cooker-switch-13a-socket-with-neon-indicators-matt-black-screwless","title":"45A DP Cooker Switch \u0026 13A Socket with Neon Indicators - Matt Black Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 45A DP cooker switch combines a 45-amp double-pole switch for controlling a cooker circuit with a 13A switched socket outlet, both behind a matt black screwless faceplate with a black insert. The double-pole switching isolates both live and neutral lines when off, allowing safe maintenance or cleaning of cooking appliances without needing to switch off at the consumer unit. Red neon indicators on both the 45A switch and the 13A socket show when each circuit is live.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchen installation within 2 metres of a cooker or hob, the unit allows a single control point for isolating the main cooking appliance while providing a convenient 13A outlet for smaller kitchen appliances such as kettles, microwaves or slow cookers. The 13A socket is independently switched from the 45A cooker control, so the cooker can be isolated without affecting devices plugged into the socket. The 45A rating handles electric cookers and hobs drawing up to 10.35kW on a 230V supply.\u003c\/p\u003e\n\u003cp\u003eThe screwless cover plate clips onto a separate metal sub-frame fixed to the back box, leaving no visible screws or fixings on the wall once installed. The matt black finish is powder-coated onto premium-grade steel, providing a non-reflective surface that resists fingerprints and pairs cleanly with black, grey and industrial kitchen schemes. A built-in gasket around the edge of the sub-frame prevents plaster dust entering the back box during installation. The unit requires a 47mm minimum back box depth and carries BS 4177 and BS 1363-2 certification.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2539718_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1293070.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the purpose of the 45A switch and neon indicator?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 45A double-pole switch isolates the cooker circuit, cutting both live and neutral lines to allow safe maintenance, cleaning or appliance replacement without switching off at the consumer unit. The red neon indicator shows when the circuit is live, even when the cooker itself is turned off at its own controls.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the 13A socket be used while the cooker switch is off?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 13A socket is independently switched and supplied from a separate circuit. You can isolate the cooker using the 45A switch while still using the 13A socket for kettles, microwaves or other kitchen appliances.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum back box depth is needed. The screwless cover plate adds approximately 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting or tiling around the unit and re-clipped without re-wiring. The built-in gasket prevents plaster dust entering the back box during installation or redecoration.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293951156491,"sku":"SFR8333NMBB","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/372978_375d56b5-262d-41e0-951e-088aa219369a.jpg?v=1714666674"},{"product_id":"45a-dp-cooker-switch-13a-switched-socket-with-dual-usb-matt-black-screwless","title":"45A DP Cooker Switch \u0026 13A Switched Socket with Dual USB - Matt Black Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 45A DP cooker control unit combines a double-pole 45A switch with a 13A switched socket and two USB-A charging ports (5V DC 2.4A shared output) in a single matt black screwless faceplate. The 45A switch isolates high-load cooking appliances such as electric cookers and ranges, while the 13A socket provides a standard outlet for smaller kitchen appliances. The dual USB ports sit above the socket, offering device charging without occupying the 13A outlet.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchen installation where Building Regulations require a cooker isolation switch within 2 metres of the appliance, this unit adds functional value by incorporating the 13A socket and USB charging in what would otherwise be unused faceplate area. The double-pole switching isolates both live and neutral lines when the cooker circuit is turned off, preventing accidental operation during maintenance or cleaning. Neon indicators on both the 45A and 13A switches confirm when each circuit is live.\u003c\/p\u003e\n\u003cp\u003eThe screwless cover plate clips onto a separate metal sub-frame fixed to the back box, hiding all screws and fixings once installed. The matt black finish is a powder-coated steel with a low-sheen surface that resists fingerprints and integrates well with contemporary, industrial and matt-black appliance kitchens. The built-in gasket around the plate edges reduces dust ingress. Certified to BS 4177, BS 1363-2 and EN 62368-1, the unit requires a minimum 47mm back box depth for safe installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3113806_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1293166.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between single-pole and double-pole switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDouble-pole (DP) switching isolates both the live and neutral conductors when the switch is turned off, completely disconnecting the appliance from the mains supply. Single-pole switches only break the live conductor. DP switching is required by Building Regulations for cooker isolation switches and provides additional safety during appliance maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 47mm back box depth is needed for safe installation. The 4.3mm projection of the screwless cover plate is measured from the wall surface once the plate is clipped onto the sub-frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dual USB-A ports provide a shared 5V DC 2.4A output. This is sufficient to charge two smartphones simultaneously or a single tablet. Use certified USB cables to ensure compatibility and safe charging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the 13A socket be used independently of the 45A switch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 13A socket has its own independent switch and can be used for standard kitchen appliances regardless of whether the 45A cooker circuit is switched on or off. The two circuits are electrically separate and wired to different terminals inside the unit.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293952434443,"sku":"SFR8333UMBB","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/373018_51c322db-06f1-4ba4-83f8-ab5194cde597.jpg?v=1714666680"},{"product_id":"13a-2-gang-dp-switched-socket-twin-earth-black-nickel-screwless-black-insert","title":"13A 2 Gang DP Switched Socket Twin Earth - Black Nickel Screwless (Black Insert)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang DP switched socket provides two 13A outlets with individual double-pole switches, a twin earth terminal configuration, and a black nickel screwless faceplate with black insert. The double-pole switching isolates both live and neutral lines when the socket is switched off, providing additional safety for high-draw appliances compared to single-pole designs.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and commercial installation where a darker metallic finish is required, the socket fits a standard 25mm minimum back box depth and uses a screwless cover plate that clips onto a separate steel sub-frame. This means there are no visible screws or fixings on the wall once installed, giving a cleaner finish than traditional screw-fixed plates. The twin earth terminals provide enhanced earthing capability for circuits requiring additional earth bonding or where multiple earth connections need to be made at the socket position.\u003c\/p\u003e\n\u003cp\u003eThe black nickel finish is a dark gunmetal tone that sits between polished chrome and matt black, providing a warmer metallic accent than stainless steel while remaining neutral enough to pair with both warm and cool colour schemes. The black insert behind the black nickel faceplate hides the back of the cover plate and gives a defined edge to each outlet aperture and rocker. Premium-grade steel construction and BS 1363:2 certification ensure the socket meets UK electrical safety standards, and the fitting carries a 25-year manufacturer warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1792455_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1293312.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.3mm of projection from the wall once fitted, giving a low-profile finish suitable for modern interiors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does twin earth terminal mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwin earth terminals provide two separate earth connection points within the socket back box, allowing additional earth bonding or multiple earth connections to be made at the socket position. This is useful in circuits requiring enhanced earthing or where earth continuity needs to be maintained to downstream outlets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate steel sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring or disturbing the terminal connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this socket style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293953253643,"sku":"SFR9000BN","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/116778_81ab07f8-b08a-4e6d-97f9-2065bb3d7aef.jpg?v=1714666692"},{"product_id":"13a-2-gang-dp-switched-socket-twin-earth-matt-black-screwless","title":"13A 2 Gang DP Switched Socket Twin Earth - Matt Black Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 2-gang DP switched socket provides two 13A outlets with double-pole switching, twin earth terminals, and a matt black screwless faceplate. Double-pole switching isolates both live and neutral lines when the socket is switched off, providing additional safety over single-pole switching for high-draw appliances. The twin earth terminals accommodate installations requiring high-integrity earthing, such as commercial environments or locations with sensitive electronics.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, commercial and hospitality installation, the socket fits a standard 25mm minimum back box depth and uses a screwless cover plate that clips onto a separate metal sub-frame. There are no visible screws or fixings on the wall once installed, giving a cleaner finish than traditional screw-fixed plates. The matt black finish on the premium-grade steel construction provides a low-sheen surface that minimises fingerprints and reflections, pairing well with contemporary, industrial and minimalist interiors.\u003c\/p\u003e\n\u003cp\u003eThe socket carries a 13A rating per outlet, handling standard UK appliance loads up to 3,120W. The built-in gasket between the cover plate and wall surface reduces dust ingress around the plate edges, maintaining the clean appearance over time. Certified to BS 1363:2 safety standards and backed by a 25-year manufacturer warranty, the fitting is rated IP20 for indoor dry-location use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2539700_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1293316.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are twin earth terminals used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwin earth terminals provide two separate earthing connection points within the socket back box. This is required for high-integrity earthing installations, commercial settings, or where building regulations specify redundant earth paths for safety-critical circuits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293953319179,"sku":"SFR9000MBB","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/155578_80fc2bd1-ea70-4046-b662-57ea5d13078c.jpg?v=1714666695"},{"product_id":"13a-1-gang-sp-switched-socket-dual-usb-matt-black-screwless-chrome-rocker","title":"13A 1 Gang SP Switched Socket Dual USB - Matt Black Screwless Chrome Rocker","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 13A 1-gang SP switched socket adds two USB-A charging ports behind a matt black screwless faceplate with a chrome rocker switch. The single-pole switching isolates the live line when the socket is switched off, and the 13A rating handles standard UK appliance loads up to 2,990W.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and office installation, the socket fits standard 25-35mm back box depths and uses a screwless cover plate that clips onto a separate metal sub-frame. This removes visible screws or fixings from the wall once installed, giving a cleaner finish than traditional screw-fixed plates. The 4.3mm projection from the wall keeps the profile low, and a built-in gasket prevents gaps between plate and wall.\u003c\/p\u003e\n\u003cp\u003eThe matt black steel faceplate provides a contemporary accent that pairs well with modern, industrial and monochrome interiors, while the chrome rocker switch adds a contrasting metallic detail. The dual USB-A ports deliver a combined 5V DC 2.4A output, allowing two devices to charge simultaneously. Twin earth terminals on the back of the socket ensure secure earthing connections during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25-35mm (dependent on wiring conditions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3638212_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1293404.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25-35mm back box depth is needed depending on wiring conditions. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dual USB-A ports provide a combined 5V DC 2.4A output shared between both ports. When two devices are plugged in, the 2.4A is split between them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The matt black cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this socket style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293953745163,"sku":"SFR9124MB","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1233558_17f780a6-bf88-4c0b-8775-aab9fa19ddee.jpg?v=1714666721"},{"product_id":"13a-3-gang-pop-up-recessed-power-socket-black-ip54","title":"13A 3 Gang Pop-Up Recessed Power Socket - Black IP54","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SK006 is a 13A 3-gang pop-up socket that recesses into kitchen worktops, office desks and boardroom tables, rising vertically when power is needed and retracting flush when not in use. The unit locks upright during operation via a clip mechanism at the base, and a chrome handle on the top cap allows the column to be pulled up or pushed down. The three UK 13A sockets are arranged vertically down an aluminium column with inverted orientation (socket apertures face away from the worktop edge), allowing plugs to sit at any angle without interfering with adjacent outlets.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation where surface-mounted sockets would disrupt clean lines or where workspace flexibility is needed, the pop-up socket requires a 90-92mm diameter hole cut into the worktop and a minimum 400mm void depth beneath the surface for the retracted column. The unit arrives with a fitted 2m cable terminating in a BS plug top, so it can be connected to a standard 13A outlet beneath the worktop or hard-wired into a fused spur. A backlit rocker switch on the column controls power to all three sockets simultaneously, with an orange indicator showing live status.\u003c\/p\u003e\n\u003cp\u003eThe IP54 rating protects against dust ingress and water splashes when the unit is in the closed position, making it suitable for kitchen worktops near sinks or wet areas. The cable management cap at the top allows the socket to be retracted even with cables still plugged in, routing them through a central aperture rather than requiring full disconnection. The aluminium casing with black polycarbonate top cap and chrome handle suits contemporary, minimalist and commercial interiors where visible power infrastructure needs to remain hidden until required.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e101 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e400 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e90-92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e2 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1242882_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_827752.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat worktop thickness does it require?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe mounting board (worktop, desk surface, table) must be 10-50mm thick. The unit requires a 90-92mm diameter hole and 25mm clearance around the hole edge for the base plate. Beneath the surface, a minimum 400mm void depth is needed to house the retracted column.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the socket be closed with cables still plugged in?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cable management cap at the top of the unit has a central aperture that allows cables to pass through when the socket is pushed down, so you can retract the unit without unplugging devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the IP54 rating maintained when the unit is extended?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP54 rating applies when the unit is in the closed, retracted position. When extended and in use, the socket outlets are exposed and the rating no longer applies. The rating protects against dust and water splashes when the socket is not in use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the unit wired in?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SK006 comes with a 2m cable fitted with a BS plug top. It can be plugged into a standard 13A socket beneath the worktop, or the plug can be removed and the cable hard-wired into a fused connection unit or consumer unit if permanent installation is preferred.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293957218571,"sku":"SK006","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/104308_0dfb36e3-7e40-410a-915b-c6458a8aa577.jpg?v=1714666824"},{"product_id":"3-gang-pop-up-socket-with-dual-usb-fastcharge-black-nickel","title":"3 Gang Pop-Up Socket with Dual USB Fastcharge - Black Nickel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SK9909BN is a 3-gang pop-up socket with dual USB Fastcharge (one USB-A, one USB-C) that retracts flush into worktops, desks and countertops when not in use. The unit pops up when needed and locks upright via a secure clip mechanism, providing three 13A UK sockets plus fast USB charging through a 100mm black nickel cap. An IP54 rating protects the internal components from dust and water splashes when the unit is closed.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchen islands, office desks, boardrooms and hotel rooms where visible trailing sockets would disrupt clean surfaces, the pop-up unit requires a circular 90-92mm cutout and a minimum 445mm void depth beneath the worktop. The aluminium body includes a backlit on\/off rocker switch and comes pre-wired with a 2m cable terminating in a UK plug, allowing installation without hard-wiring. The inverted socket positions and cable management cap allow devices to remain plugged in even when the unit is retracted.\u003c\/p\u003e\n\u003cp\u003eKnightsbridge Fastcharge USB technology switches output voltage between 5V and 12V to optimise charging speed for compatible devices, delivering 0-50% charge in under 30 minutes where the device supports fast-charge protocols. The USB-C port provides up to 12V DC 1.5A (18W) for Power Delivery devices, while the USB-A port offers standard 5V output. Total shared output across both ports is capped at 20W. The black nickel finish on the die-cast metal cap pairs with stainless steel appliances, dark worktops and contemporary kitchen hardware.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e445 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e90-92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e2 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFastcharge\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3897534_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_827764.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat worktop thickness does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unit fits worktops between 10mm and 50mm thick. Below the worktop surface you need a minimum 445mm void depth to accommodate the retracted socket assembly and the 2m cable run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it waterproof when closed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unit carries an IP54 rating when closed, meaning it's protected against dust ingress and water splashes. It is not submersion-proof and should not be installed where standing water can pool on the closed cap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Fastcharge and which devices support it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFastcharge switches output voltage between 5V and 12V to optimise charging speed for compatible devices. Most smartphones and tablets activate fast-charge protocols between 0-70% battery, then revert to standard charging to protect battery health. Note that iPhone 15 does not support voltage-switching fast charging via USB-C on this socket — charge via the USB-A port or a wireless pad instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan devices remain plugged in when the unit is retracted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The inverted socket positions and cable management cap allow cables to exit through the top of the closed unit, so devices can stay connected even when the pop-up is fully retracted. This is useful for charging overnight or keeping items plugged in when the worktop surface needs to be clear.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293957480715,"sku":"SK9909BN","price":117.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/505674_0ec410f5-5121-4606-8b5e-1e190061898c.jpg?v=1714666829"},{"product_id":"mercury-1-gang-rubber-trailing-socket-black","title":"Mercury 1 Gang Rubber Trailing Socket - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury is a single-gang 13A trailing socket housed in a heavy-duty black rubber body with an integrated cable clamp at the rear. The rubber construction provides impact resistance and durability in workshop, garage and site environments where dropped tools, abrasion and moisture exposure would damage standard plastic trailing sockets.\u003c\/p\u003e\n\u003cp\u003eDesigned for extending mains power to a single tool or appliance, the socket accepts standard UK 13A plugs and is rated for loads up to 3,120W on 230V mains. The integrated cable clamp grips the incoming mains cable where it enters the body, providing strain relief that prevents the cable from being pulled out of the internal terminals during movement or accidental tugging. This makes the socket suitable for portable applications where the cable is subject to repeated handling.\u003c\/p\u003e\n\u003cp\u003eThe compact 60mm x 90mm footprint sits discreetly behind furniture or equipment, and the low-profile 28mm depth allows the socket to fit into tight spaces between walls and appliances. The socket conforms to BS1363\/A, the British Standard for 13A plugs, socket-outlets and adaptors, meaning it meets the required electrical safety and mechanical performance criteria for UK domestic and commercial use. The black rubber finish resists marking and blends into industrial settings.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e60.3mm x 90mm x 28.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eTPR - ThermoPlastic Rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent rating\u003c\/td\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eWiring Accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum load?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket is rated at 13A on 230V mains, which supports appliances and tools drawing up to 3,120W. Do not exceed this rating as it may cause overheating or tripping of the supply circuit breaker.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe rubber housing provides better moisture resistance than standard plastic trailing sockets, but this product does not carry an IP rating for outdoor use. It should be used indoors or under cover in dry conditions only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the cable clamp do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integrated cable clamp at the rear of the socket grips the incoming mains cable, preventing it from being pulled out of the internal terminals if the cable is tugged or moved during use. This extends the life of the socket in portable applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it have any switching or surge protection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a basic trailing socket with no built-in switch, surge protection or fuse beyond the standard fuse in the plug feeding it. It provides a single unswitched outlet for extending mains power to one device.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313429700875,"sku":"429.619UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/429619UK_0.jpg?v=1784897051"},{"product_id":"mercury-2-gang-13a-rubber-trailing-socket-black","title":"Mercury 2 Gang 13A Rubber Trailing Socket - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury is a 2-gang 13A rubber trailing socket rated for 250Vac mains supply, designed as a portable extension outlet for workshops, construction sites and garages where fixed sockets are inconvenient or unavailable. The socket body is moulded from heavy-duty rubber rather than plastic, giving impact resistance and flexibility under temperature variation. A fitted cable clamp at the rear provides strain relief where the mains cable enters the socket body.\u003c\/p\u003e\n\u003cp\u003eBuilt to BS1363\/A specification, the socket accepts standard UK 13A plugs and provides two individually live outlets, each capable of handling loads up to 13A (3,120W at 250Vac). The trailing socket design means it sits at the end of an extension lead rather than mounting to a wall or bench, allowing it to be positioned where power is needed and moved as work progresses. The rubber construction resists damage from being dropped, stepped on, or knocked against equipment.\u003c\/p\u003e\n\u003cp\u003eThe black rubber body has a textured grip surface that prevents slipping on wet or oily surfaces common in workshop environments. The cable clamp is pre-fitted during manufacture, reducing the risk of cable pull-out under tension and extending the service life of the socket when used with heavy equipment that may tug on the cable during operation. Each outlet is recessed into the body to protect plug pins from accidental contact when the socket is in use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent rating\u003c\/td\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eWiring Accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable gauge is recommended for use with this socket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe socket is designed to handle 13A loads, so the extension cable feeding it should be rated at 13A minimum. For typical workshop use, 1.5mm² cable is standard for runs up to 25m. Longer runs or outdoor use may require 2.5mm² cable to reduce voltage drop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the socket waterproof or outdoor-rated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The Mercury trailing socket carries no IP rating and is designed for dry indoor workshop and garage use. It should not be used in wet conditions, outdoors without overhead cover, or where it may be submerged or exposed to direct rain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan both outlets be used simultaneously at full load?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach outlet is rated at 13A, but the total combined load across both outlets should not exceed 13A when both are in use. For example, two 6A tools can run simultaneously, but two 13A appliances cannot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the cable clamp do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable clamp grips the outer sheath of the mains cable where it enters the socket body, preventing strain on the internal terminals if the cable is pulled or tugged during use. This reduces the risk of loose connections or internal wire damage over time.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313429733643,"sku":"429.625UK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/429625UK_0.jpg?v=1784897066"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/collections\/products_SFR9001MBB.jpg?v=1789985704","url":"https:\/\/niori.co.uk\/collections\/black-sockets.oembed?page=3","provider":"Niori","version":"1.0","type":"link"}