{"title":"Black Light Switches","description":"\u003cp\u003eA black light switch is usually the first fitting anyone notices on a dark wall, because it sits at eye level and catches the hand. We hand-pick switches in matt black and black nickel across one way, two way and intermediate arrangements, in screwless, flat plate and curved edge profiles, so a whole room can be wired in one look rather than assembled from whatever the wholesaler had.\u003c\/p\u003e","products":[{"product_id":"20ax-dp-grid-switch-module-black-nickel","title":"20AX DP Grid Switch Module - Black Nickel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 20AX DP grid module is a single-gang switch unit designed for the Knightsbridge Grid modular system, finished in black nickel. The module clips into position from the front of a separately-sold grid mounting frame, allowing custom switch configurations to be built within a single faceplate by combining multiple modules side-by-side.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and light commercial installations where switch layouts need more flexibility than pre-assembled plates allow, the grid system lets electricians and specifiers create bespoke combinations — mixing switches, sockets, dimmers and data modules within a 2-way, 3-way or 4-way frame. The 20AX rating handles loads up to 4,600W on 230V, making it suitable for high-draw circuits including water heaters, electric ovens and workshop equipment. Double pole switching isolates both live and neutral lines when off, providing additional safety over single-pole switching.\u003c\/p\u003e\n\u003cp\u003eThe module measures 24.8mm wide (one grid position), 56.3mm tall, with a 7mm projection from the frame once clipped in. The black nickel finish provides a darker, cooler metallic tone than polished chrome or brushed steel, sitting between gunmetal and pewter on the colour spectrum. The ABS body and steel contact assembly carry a 25-year warranty and an IP20 rating for dry indoor installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e56.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e24.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e18.7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3905318_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Knightsbridge Grid system?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grid system lets you build custom switch and socket combinations by clipping individual modules into a shared metal frame. Frames are sold separately in 2-way, 3-way and 4-way configurations, each accepting the corresponding number of modules. The entire assembly then fits a standard UK back box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 35mm minimum back box depth is needed. The module has an 18.7mm recessed depth plus the depth of the grid frame itself, so a deeper 47mm back box is recommended if multiple modules or cable runs make the installation tight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 20AX DP mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e20AX means the module is rated at 20 amps and suitable for AC circuits (the 'X' denotes AC). DP means double pole — the switch isolates both the live and neutral conductors when turned off, providing additional safety for high-power appliances.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mix finishes within one grid frame?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, but the frame and all modules need to be ordered separately. Knightsbridge produces grid modules in multiple finishes including polished chrome, brushed chrome, black nickel, matt black and white, so you can combine different modules in different finishes within a single frame if the installation requires it.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293553615115,"sku":"GDM002BN","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/459838_dcb5ea62-0600-42ce-9a0d-a35a2eaff6db.jpg?v=1714660245"},{"product_id":"20ax-2-way-retractive-sp-switch-module-black-nickel","title":"20AX 2 Way Retractive SP Switch Module - Black Nickel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge GDM006BN is a 20AX 2-way retractive single-pole switch module with a black nickel finish and PRESS engraving on the rocker face. The module clips into compatible grid mounting frames from the front without tools, allowing individual switches to be assembled into custom multi-gang configurations alongside socket modules, dimmer modules and blank plates.\u003c\/p\u003e\n\u003cp\u003eDesigned for both residential and light commercial installations, the retractive action means the rocker returns to its neutral position after being pressed, making this suitable for controlling motorised blinds, garage doors, entrance gates, stairway lighting with timed cut-off circuits, and other applications where momentary contact is required rather than latching. The 20AX rating handles loads up to 4,600W on 230V mains, covering most domestic and light commercial switching requirements.\u003c\/p\u003e\n\u003cp\u003eThe black nickel finish is a dark gunmetal tone with a low-sheen surface that resists fingerprints better than polished finishes. The module body is constructed from ABS thermoplastic with steel internal components, and the IP20 rating suits dry indoor locations. The module measures 24.8mm wide, allowing three modules to fit side-by-side in a standard triple-width grid frame, or two modules with a socket in a double frame.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e56.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e24.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e18.7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3905372_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a retractive switch and when is it used?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA retractive switch returns to its neutral position after being pressed, providing momentary contact rather than staying on or off like a standard switch. This makes it suitable for controlling motorised equipment (garage doors, gates, blinds), stairway lighting with timed circuits, and bell-push applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounting frame is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module clips into Knightsbridge grid mounting frames, sold separately. Choose a frame width based on how many modules you need — a 24.8mm module width means three fit into a triple frame, two into a double frame. The frame then fixes to a standard 35mm minimum depth back box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be wired as a 2-way switch circuit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 2-way designation means it can be wired in a circuit with another 2-way switch to control the same load from two locations, or used as a simple on-off switch when only one position is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces grid modules in polished chrome, brushed chrome, polished brass, antique brass, matt black, white and stainless steel. Use the search function or filters to find other finishes in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293553910027,"sku":"GDM006BN","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/459888_8ac7e838-2606-45e5-a76e-7eafe72fc878.jpg?v=1714660256"},{"product_id":"20ax-2-way-sp-key-module-marked-emg-ltg-test-black-nickel","title":"20AX 2 Way SP Key Module Marked EMG LTG TEST - Black Nickel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 20AX 2-way SP key module is a grid switch marked 'EMG LTG TEST' for emergency lighting test circuits. The module clips into Knightsbridge grid mounting frames (sold separately) from the front, allowing it to be combined with other grid modules to build custom switch plates. A removable key controls the switch action, restricting operation to authorised personnel only.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial buildings, schools, hotels and offices where emergency lighting systems require manual testing, the module provides a dedicated control point for test circuits. The 20AX rating handles high-current emergency lighting loads up to 4,600W on 230V circuits. The 2-way switching configuration allows the module to control a circuit from one location within a multi-module grid plate, or to be paired with a second switch elsewhere for two-way control of the same circuit.\u003c\/p\u003e\n\u003cp\u003eThe black nickel finish provides a darker metallic alternative to polished or brushed chrome, pairing well with darker interiors and contemporary electrical accessories. The module measures 24.8mm wide, occupying one grid space in Knightsbridge's modular system. The ABS body and steel contact mechanism are rated IP20 for indoor dry-location use. The key is supplied with the module and can be removed after switching to prevent unauthorised changes to the emergency lighting test state.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e56.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e24.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e17.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3905379_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounting frame does this module require?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module clips into Knightsbridge grid mounting frames, which are sold separately. The 24.8mm width occupies one grid space. Frames are available in various configurations from 1-gang to 4-gang, in finishes matching the black nickel module.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the 20AX rating used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e20AX indicates a 20 ampere rating suitable for high-current circuits. On a 230V supply this handles loads up to 4,600W, making it appropriate for emergency lighting circuits that may control multiple fittings simultaneously during testing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the key be removed after switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The key can be removed in either the on or off position, allowing authorised personnel to switch the emergency lighting test circuit and then remove the key to prevent unauthorised changes. One key is supplied with the module.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way switching mean in this context?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2-way configuration allows the module to control a circuit from one location, or to be wired with a second 2-way switch elsewhere for control of the same circuit from two different positions. For most emergency lighting test applications, the module is used as a simple on\/off control at a single location.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293553975563,"sku":"GDM007BN","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/459898_ef29c363-2176-49ae-ae75-84f58a4675d6.jpg?v=1714660260"},{"product_id":"32a-1-gang-key-card-switch-black-nickel-screwless","title":"32A 1 Gang Key Card Switch - Black Nickel Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 32A key card switch controls power and lighting in hotel rooms, student accommodation and serviced apartments by requiring a room key card to activate circuits. When the card is inserted into the slot, the switch energises connected circuits up to 32A load; when the card is withdrawn, power cuts automatically after 30 seconds, turning off lights and non-essential outlets to reduce energy waste in unoccupied rooms.\u003c\/p\u003e\n\u003cp\u003eDesigned for hospitality and commercial accommodation installation, the switch fits a standard 47mm minimum back box depth and uses a screwless black nickel faceplate with a built-in gasket that sits flush to the wall. The backlit pink arrow on the card slot guides guests to the correct orientation in dark rooms, eliminating the fumbling that happens with unmarked slots. The 32A rating handles combined lighting, sockets and in-room appliances on a single control point.\u003c\/p\u003e\n\u003cp\u003eThe black nickel finish provides a dark metallic accent that suits contemporary hotel interiors and masks fingerprints better than polished chrome or brass. The screwless cover plate clips onto a separate metal sub-frame, leaving no visible fixings on the wall once installed. The switch is certified to EN 60669-1 and carries an IP20 rating for indoor dry-location use. Premium-grade steel construction and ABS internal components give the mechanism durability under frequent daily use in commercial settings.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e31.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4679079_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_873162.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens when the card is removed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePower to connected circuits cuts automatically 30 seconds after the key card is withdrawn. This delay allows guests to remove the card before leaving without immediately plunging the room into darkness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat load can it control?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe switch is rated at 32A on 230V, allowing it to control combined lighting, sockets and in-room appliances on a single control point. This covers typical hotel room loads including multiple lamps, TV, kettle and charging devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 47mm minimum mounting box depth is needed for installation. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the backlit arrow do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pink backlit arrow on the card slot illuminates to show guests the correct card orientation in dark rooms, reducing the frustration of repeated failed insertions when entering at night.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293637304587,"sku":"SFCARDBN","price":30.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/915768_78a26586-8bb6-4f6d-a12d-66273ab4d9b2.jpg?v=1714661578"},{"product_id":"20ax-1-gang-2-way-sp-grid-toggle-switch-matt-black","title":"20AX 1 Gang 2-Way SP Grid Toggle Switch - Matt Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 20AX 1-gang 2-way SP grid toggle switch is a modular switching component designed to clip into compatible grid frames (sold separately). The switch module measures 24.8mm wide by 56.3mm tall and fits a single grid aperture within Knightsbridge's grid plate system, allowing multiple switching functions to be combined in a single faceplate. The matt black toggle sits proud of a steel and ABS body finished in matching matt black.\u003c\/p\u003e\n\u003cp\u003eDesigned for modular grid installations in residential, hospitality and commercial settings, the switch provides 2-way single-pole switching at 20AX rating on 230V 50Hz circuits. Two-way switching allows the same light or load to be controlled from two different switch locations — typically used for stairs, long hallways or rooms with multiple entry points. The 20AX rating handles circuits up to 4,600W, making it suitable for higher-load lighting circuits including multiple downlights or large pendant arrays.\u003c\/p\u003e\n\u003cp\u003eThe switch clips directly into the grid frame without visible screws or fixings on the faceplate. Installation requires a 35mm minimum back box depth to accommodate the grid frame and switch module combined. The matt black finish provides a low-sheen surface that minimises fingerprints and pairs with contemporary, industrial and monochrome interior schemes. The module carries a 25-year warranty and an IP20 rating for dry indoor locations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e56.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e24.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e15.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e20.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4960713_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat grid frame does this switch fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis module clips into Knightsbridge grid frames sold separately. The 24.8mm width fits a single grid aperture. Grid frames are available in 2, 3 and 4 module widths across various finishes to match this matt black module.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way SP switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSingle-pole (SP) 2-way switching allows the same light or load to be controlled from two different switch locations. This is typically used for stairs, long hallways or rooms with doors at opposite ends where the same lighting needs to be controlled from either position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the 20AX rating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e20AX indicates a 20-amp rating at 230V, suitable for circuits up to 4,600W. This handles higher-load lighting circuits including multiple LED downlights, large pendant arrays or banks of wall lights on a single circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the module be removed and replaced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Grid modules clip into the frame and can be removed for replacement or reconfiguration without disturbing the grid frame itself. This allows switching layouts to be changed without re-wiring the back box.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293653524747,"sku":"GDM01TOGMB","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/983274_15083489-b043-4601-87e1-21ced33fd57a.jpg?v=1714661919"},{"product_id":"20ax-1-gang-2-way-sp-grid-toggle-switch-black-nickel","title":"20AX 1 Gang 2-Way SP Grid Toggle Switch - Black Nickel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 20AX 1-gang 2-way SP grid toggle switch is a modular component designed to clip into compatible grid mounting frames (sold separately). The switch features a single-pole 2-way configuration rated at 20AX on 230V, suitable for controlling lighting circuits from two different locations within residential, office and commercial installations.\u003c\/p\u003e\n\u003cp\u003eThe black nickel finish provides a high-gloss dark metallic surface that contrasts against both light-toned and dark interior schemes. The toggle mechanism operates with a defined tactile action, and the switch occupies a single grid module position, allowing it to be combined with other grid switches, sockets or USB modules on a shared frame. The 35mm minimum back box depth requirement fits most standard grid system installations.\u003c\/p\u003e\n\u003cp\u003eConstructed from premium-grade steel with ABS components, the module measures 56.3mm high by 24.8mm wide with a 20.5mm projection from the grid frame once installed. The IP20 rating limits use to dry indoor locations. The switch carries Knightsbridge's 25-year warranty against manufacturing defects.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\" style=\"width: 100%; height: 215.6px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eHeight\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e56.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eWidth\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e24.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eDepth\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e15.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eProjection\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e20.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eConstruction 2\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e\u0026amp; ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eIP Rating\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4960728_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a grid toggle switch and how does it differ from a standard switch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGrid toggle switches are modular components that clip into separate mounting frames, allowing multiple switches, sockets and USB modules to be combined on a single faceplate. Standard switches come as complete units with their own faceplates. Grid systems provide flexibility to configure custom switch plates with different combinations of functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way SP mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2-way single-pole means the switch can control a lighting circuit from two different locations when paired with another 2-way switch. Single-pole indicates it switches the live conductor only. This is the standard configuration for hall and landing lighting where you need control from both ends of a corridor or staircase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the 20AX rating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e20AX indicates the switch can handle up to 20 amps on 230V AC circuits. This is higher than standard 10AX switches and suitable for circuits with multiple lights or higher loads, making it appropriate for commercial installations or homes with extensive lighting circuits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating limits use to dry indoor locations outside bathroom zones. It cannot be installed within the regulated zones around baths and showers where higher IP ratings are required.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293654180107,"sku":"GDM01TOGBN","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/983262_e21d9d7d-42c3-45fd-a980-e00abeec5291.jpg?v=1714661933"},{"product_id":"20ax-intermediate-grid-toggle-switch-module-black-nickel","title":"20AX Intermediate Grid Toggle Switch Module - Black Nickel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge 20AX intermediate toggle switch module provides three-way or multi-point switching control for lighting circuits rated up to 20A. The module clips into Knightsbridge grid frames (sold separately), allowing it to be combined with other grid modules to create custom switch and socket configurations. The black nickel finish on the toggle dolly and surround gives a dark, semi-reflective metallic appearance.\u003c\/p\u003e\n\u003cp\u003eIntermediate switches are used where a lighting circuit needs to be controlled from three or more locations. They sit between two standard two-way switches in the circuit, allowing any switch in the sequence to turn the light on or off regardless of the position of the other switches. This makes them common in hallways, staircases and large rooms where multiple entry points need independent control of the same lighting.\u003c\/p\u003e\n\u003cp\u003eThe module measures 24.8mm wide and 56.3mm tall, fitting a single grid position within Knightsbridge's modular grid system. The steel and ABS construction houses the switching mechanism behind the toggle, which projects 20.5mm from the front of the frame once clipped in. The 35mm minimum back box depth requirement allows installation in standard UK back boxes. The black nickel finish pairs with other black nickel grid modules or can be mixed with polished chrome, brushed chrome or brass finishes within the same grid frame.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e56.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e24.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e15.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e20.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4960776_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is an intermediate switch and when do I need one?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn intermediate switch allows control of a lighting circuit from three or more locations. If you already have two-way switches at either end of a hallway or staircase and need to add a third switching point in the middle, you need an intermediate. It sits between the two existing two-way switches in the circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this module include a frame?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is the toggle switch module only. It clips into Knightsbridge grid frames, which are sold separately. You will need to select a grid frame in the appropriate size (1-gang, 2-gang, etc.) and finish to match or complement this module.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mix this with other grid modules?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Knightsbridge grid modules are designed to be mixed and matched. You can combine this black nickel toggle with other black nickel switches, sockets, dimmers or USB modules within the same grid frame, or mix finishes for contrast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 35mm minimum back box depth is needed. This is deeper than the module itself because the back box must accommodate the wiring connections and the depth of the grid frame that holds the module.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293654933771,"sku":"GDM05TOGBN","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/983364_5c094032-c8e5-4ea5-b04d-225cf9094eae.jpg?v=1714661954"},{"product_id":"20ax-1-gang-2-way-modular-switch-25x50mm-black","title":"20AX 1 Gang 2-Way Modular Switch 25x50mm - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 20AX 1-gang 2-way modular switch is a 25x50mm euro module designed to clip into custom euro modular faceplates, allowing flexible switch and socket configurations in a single installation. The switch operates at 230V with a 20AX rating, making it suitable for lighting circuits and other standard residential or commercial wiring applications.\u003c\/p\u003e\n\u003cp\u003eEuro modular systems allow multiple switches, sockets and accessories to be combined behind a single faceplate frame, replacing the fixed grid format of traditional UK wiring accessories. This 25x50mm module occupies one standard euro grid space and can be paired with other 25x50mm modules (including sockets, dimmers, data ports) to build custom plates in 2-gang, 3-gang or wider configurations. The 2-way switching configuration enables control of a lighting circuit from two separate switch positions.\u003c\/p\u003e\n\u003cp\u003eThe module is constructed from ABS polymer with a black finish and carries an IP20 rating, making it suitable for dry indoor installations in living rooms, bedrooms, offices and hallways. The 25.7mm depth requires a minimum 25mm back box, and the module clips into the rear of compatible euro modular faceplates sold separately. Class II construction provides double-insulated protection without requiring an earth connection to the switch body itself.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e25.7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5328825_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a euro modular switch and how does it differ from a standard UK switch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEuro modular switches are individual components that clip into a separate faceplate frame, allowing you to build custom combinations of switches, sockets and accessories in a single installation. Standard UK switches come as fixed 1-gang or 2-gang units. Euro modular systems let you combine different module types (switch, socket, dimmer, data) behind one faceplate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat faceplate does this module require?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis 25x50mm module requires a compatible euro modular faceplate frame sold separately. Knightsbridge produces frames in various gang configurations and finishes. The module clips into the rear of the frame, which then fits onto a standard UK back box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 20AX mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e20AX is the switch rating: 20 amps at 230V AC. This makes the switch suitable for lighting circuits and other standard household loads up to approximately 4,600W. The 'X' denotes compliance with specific switch standards for inductive loads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for 2-way lighting control?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 2-way configuration allows the switch to control a lighting circuit from two separate positions, such as at either end of a hallway or at the top and bottom of a staircase. It can also be used as a simple on\/off switch in 1-way applications.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293680984331,"sku":"NET2BK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1300748_4e2ecf96-0360-48d5-aa8c-624f7e14c69b.jpg?v=1714662451"},{"product_id":"20ax-1-gang-intermediate-modular-switch-25x50mm-black","title":"20AX 1 Gang Intermediate Modular Switch 25x50mm - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 20AX 1-gang intermediate modular switch is a 25x50mm black switch module designed to fit Euro modular faceplates, allowing installers to build custom multi-gang switch and socket combinations. An intermediate switch is used in three-way or four-way lighting circuits where a single light or group of lights needs to be controlled from three or more locations in a room or hallway.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installations requiring flexible switch configurations, the module clips into compatible Knightsbridge modular faceplates alongside other 25x50mm modules such as sockets, data ports, or additional switches. The 20AX rating handles lighting loads up to 4,600W on 230V mains, making it suitable for multi-lamp circuits, chandeliers, or high-output LED driver loads. The module requires a 25mm minimum back box depth and is rated IP20 for indoor use only.\u003c\/p\u003e\n\u003cp\u003eThe black ABS construction provides a hard-wearing surface that resists scratching and discolouration under regular use. The rocker action gives clear tactile feedback when switching, and the module fits flush within the faceplate aperture once installed. Knightsbridge produces matching modules in the same black finish, allowing consistent aesthetics across multi-gang plates.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e25.7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5328829_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is an intermediate switch used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn intermediate switch is used in lighting circuits where three or more switches control the same light or group of lights. It sits between two two-way switches in the circuit. Common applications include long hallways, staircases with landings, and large rooms with multiple entry points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat faceplate does this module fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis 25x50mm module fits Knightsbridge Euro modular faceplates in 1-gang, 2-gang, 3-gang and 4-gang configurations. The faceplate is sold separately and clips onto the modules once they are wired into the back box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be mixed with socket modules on the same plate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Knightsbridge modular faceplates allow combinations of switches, sockets, USB ports, data modules and blanks in any configuration that fits the plate aperture. This 25x50mm switch occupies one module space.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed. The module itself is 25.7mm deep, so the back box must accommodate the module plus wiring behind it.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293681115403,"sku":"NET12BK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1300772_43804052-6ed2-4ac4-9139-0c4d1ad03909.jpg?v=1714662456"},{"product_id":"20ax-1-gang-2-way-modular-wide-rocker-switch-50x50mm-black","title":"20AX 1 Gang 2 Way Modular Wide Rocker Switch 50x50mm - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 20AX 1-gang 2-way modular rocker switch is a 50x50mm wide black module designed to fit euro modular faceplates, allowing custom configurations when paired with other modules in the Knightsbridge modular range. The 2-way switching allows control of a single lighting circuit from two different locations, and the 20AX rating handles loads up to 4,600W on 230V circuits.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installations where modular switching is preferred over fixed-format plates, the switch works in conjunction with Knightsbridge left-hand and right-hand socket combination plates to build custom layouts. The 50x50mm format provides a larger rocker contact area than the 25x50mm variant, making the switch easier to locate and operate in low-light conditions or for users with limited dexterity.\u003c\/p\u003e\n\u003cp\u003eThe black ABS construction carries an IP20 rating for indoor dry locations, and the module requires a minimum 25mm back box depth behind the faceplate. The rocker action is sprung-return with a positive click at both the on and off positions, and the switch accepts standard UK twin-and-earth or three-core-and-earth cable configurations depending on whether it's used as a one-way or two-way circuit.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e25.7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5328833_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a modular switch and how does it differ from a standard plate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA modular switch is a separate component that fits into a euro modular faceplate, allowing you to build custom configurations by combining switches, sockets, dimmers and other modules in a single plate. Standard switches come as a complete fixed unit where the switch and plate are one piece.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2-way switching allows a single light or circuit to be controlled from two different switch locations, typically used at opposite ends of a hallway or at the top and bottom of a staircase. It requires specific wiring with three-core-and-earth cable between the two switch positions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat faceplates is this switch compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe switch fits Knightsbridge euro modular faceplates including left-hand and right-hand socket combination plates. The faceplate is sold separately and determines the final finish and number of modules that can be installed together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat load can a 20AX switch handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 20AX rating allows the switch to handle up to 4,600W on 230V circuits, which covers most domestic and commercial lighting loads including LED, halogen and incandescent circuits.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293681508619,"sku":"NET2WBK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1300744_2042e6ac-69c2-4493-99a0-538d6eec49f6.jpg?v=1714662461"},{"product_id":"20ax-1-gang-intermediate-modular-wide-rocker-switch-50x50mm-black","title":"20AX 1 Gang Intermediate Modular Wide Rocker Switch 50x50mm - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge NET12WBK is a 20AX 1-gang intermediate modular rocker switch in a 50x50mm euro module format, finished in matt black ABS. An intermediate switch allows control of a single light circuit from three or more positions, working alongside two-way switches at the start and end of the switching sequence. The wide 50x50mm rocker provides a larger contact area than standard 25x50mm modules, making the switch easier to operate in the dark or with wet hands.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installations using euro modular systems, the switch clips into any compatible modular faceplate from the Knightsbridge GRID or Modular Metal ranges. The 25mm minimum mounting box depth allows it to fit shallow back boxes common in stud wall and plasterboard installations. The 20AX rating handles lighting loads up to 4,600W on 230V circuits, making it suitable for high-wattage circuits including multiple spotlights or large pendant arrays.\u003c\/p\u003e\n\u003cp\u003eThe matt black ABS construction provides impact resistance and a low-sheen finish that minimises fingerprints and glare under artificial lighting. The rocker mechanism uses a positive-action contact that clicks audibly when switched, giving tactile feedback. The IP20 rating confirms the switch is designed for dry indoor environments rather than bathrooms, kitchens or outdoor locations requiring higher ingress protection.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e25.7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5328844_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is an intermediate switch and when is it needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn intermediate switch allows a single light to be controlled from three or more positions. It sits between two two-way switches in a circuit, so for example a landing light might be controlled by a two-way at the bottom of the stairs, an intermediate on the landing, and a two-way at the top of the upper floor. For two-position control only, use two-way switches instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat euro modular faceplates is this compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 50x50mm module fits any Knightsbridge GRID or Modular Metal euro faceplate. Faceplates are available in 1-6 module widths and various finishes including brushed chrome, polished chrome, black nickel and matt black. Modules and faceplates are sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom or kitchen?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating means it is designed for dry indoor locations only. For bathrooms and kitchens, switches must be installed outside zone areas or use higher IP-rated products designed for damp environments. Consult Part P Building Regulations and BS 7671 wiring regulations before installation in wet areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between 25x50mm and 50x50mm modules?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth fit the same euro modular faceplate grid. The 50x50mm wide rocker module occupies two module spaces horizontally but provides a larger rocker surface, making it easier to locate and press. The 25x50mm occupies one module space and is used where more modules need to fit in a single faceplate.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293681606923,"sku":"NET12WBK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1300784_3b876118-f84b-4012-b8a3-ee31835d76de.jpg?v=1714662466"},{"product_id":"10ax-triple-pole-fan-isolator-switch-matt-black-rounded-edge","title":"10AX Triple Pole Fan Isolator Switch - Matt Black Rounded Edge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX fan isolator switch is a triple-pole switch that isolates fan units while keeping the lighting circuit live, designed for bathrooms, utility rooms and kitchens where an extractor fan needs independent switching from the main lights. The switch carries a 10A rating at 230V and uses three poles to isolate both fan live, neutral and switched live connections in a single action.\u003c\/p\u003e\n\u003cp\u003eInstalled typically in en-suite bathrooms, WCs and utility rooms, the switch sits between the fan unit and the wiring circuit, allowing safe isolation for maintenance without needing to switch off the entire room's power. The rounded-edge faceplate measures 87.75mm square with a 7.5mm projection from the wall once fitted onto a 16mm minimum back box depth. The matt black finish provides a low-sheen neutral tone that suits contemporary, industrial and monochrome interiors without the reflective glare of polished finishes.\u003c\/p\u003e\n\u003cp\u003eThe faceplate is pressed from premium-grade steel with a built-in gasket behind the plate, providing improved dust resistance over basic plastic faceplates. The screw terminals accept standard UK wiring, and an earth terminal is provided for Class I earthed installations. The switch is certified to BS EN 60669-1 and BS EN 60669-2-4, with IP20 rating suitable for general indoor use in dry locations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901185_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a triple-pole fan isolator and why is it needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA triple-pole fan isolator switches three separate conductors simultaneously — the fan live, neutral and switched live — allowing complete electrical isolation of the fan unit for safe maintenance while leaving the room lighting circuit live. This is a Building Regulations requirement in many bathroom installations where the fan is wired separately from the light switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 16mm back box depth is needed. The 7.5mm projection of the faceplate adds to the overall depth once installed. Standard 25mm or 35mm back boxes are compatible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe switch carries IP20 rating, suitable for general indoor dry locations. In bathrooms it must be installed outside the defined zones (typically outside Zone 2, at least 600mm from the bath or shower enclosure edge) or in a location not subject to direct water spray. Consult Part P Building Regulations and BS 7671 wiring regulations for bathroom placement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this rounded-edge fan isolator in multiple finishes including polished chrome, brushed chrome, antique brass, polished brass and white. Use the search function or category filters to find alternative finishes in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293696385291,"sku":"CL11MBB","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1553964_056a3969-81c7-470c-bba8-8c6810a27610.jpg?v=1714662784"},{"product_id":"10ax-1-gang-intermediate-switch-matt-black-rounded-edge","title":"10AX 1 Gang Intermediate Switch - Matt Black Rounded Edge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 1-gang intermediate switch is a three-way lighting control in a matt black rounded-edge metal plate. It sits between two 2-way switches in a circuit, allowing a single light to be controlled from three separate locations — typically at the bottom of a staircase, on a mid-floor landing, and at the top of the stairs.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential staircases, long hallways, and open-plan spaces where lighting needs to be controlled from more than two points, the switch carries a 10AX rating suitable for up to 2,300W of lighting load on 230V mains. The premium-grade steel faceplate measures 87.75mm square with a projection of 7.5mm from the wall once fitted to a standard 16mm minimum back box. The rounded edges soften the profile against walls and reduce the risk of snagging on clothing or bags in narrow hallways.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish is a low-sheen powder coat over the steel substrate, giving a fingerprint-resistant surface that pairs well with industrial, contemporary and minimalist interiors. The metal rocker matches the faceplate tone exactly, avoiding the tonal mismatch that can occur with plastic inserts behind metal plates. The switch includes screw terminals for standard UK wiring, an earth terminal for Class I installation, and a built-in gasket behind the plate that improves the IP20 rating by reducing dust ingress around the edges.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901216_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is an intermediate switch used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn intermediate switch sits between two 2-way switches in a three-way lighting circuit, allowing a single light or group of lights to be controlled from three or more separate locations. Common installations include staircases with a landing, long hallways with three entry points, and large rooms with multiple doorways.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 16mm mounting box depth is needed. The switch plate itself projects 7.5mm from the wall once fitted, giving a total depth of approximately 23.5mm from the wall surface to the back of the box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the plate screwed to the wall?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Knightsbridge rounded-edge range uses visible screw fixings at the top and bottom of the plate. The screws are finished to match the matt black faceplate. For a screwless option, see the Knightsbridge screwless range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces the rounded-edge intermediate switch in multiple finishes including polished chrome, brushed chrome, polished brass, antique brass, and white. Use the search function or filters at Niori to find other variants in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293696450827,"sku":"CL12MBB","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1553972_18b13552-867c-4063-9c7e-aeb3c26768ae.jpg?v=1714662787"},{"product_id":"10ax-1-gang-2-way-switch-matt-black-rounded-edge","title":"10AX 1 Gang 2-Way Switch - Matt Black Rounded Edge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 1-gang 2-way switch provides two-way lighting control from a single wall position in a matt black rounded-edge metal faceplate. The 10AX rating handles lighting loads up to 2,300W on 230V mains, making it suitable for both individual light fittings and multi-bulb circuits where control is needed from two separate locations in the same room.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installation, the switch fits a shallow 16mm minimum back box depth, making it compatible with both new builds and retrofit installations where stud wall depth is limited. The two-way configuration pairs with a matching switch elsewhere in the room to control the same light circuit from two positions — common in hallways, stairwells, and bedrooms where control is needed at both entry and exit points. The rocker mechanism operates with a defined click action that gives clear on\/off feedback.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish is a low-sheen powder coat on premium-grade steel, creating a flat surface that minimises fingerprints and light reflections. The rounded edge profile softens the transition between the faceplate and the wall, giving a less angular appearance than sharp-edged alternatives. The matching black rocker sits flush with the plate when in the off position and projects 3mm when switched on. Certified to EN 60669-1 and carrying an IP20 rating for indoor dry locations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901278_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a 2-way switch used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 2-way switch allows the same light circuit to be controlled from two separate wall positions. This is typically used in hallways, stairwells and larger rooms where you need to turn the light on or off from either end of the space. It requires two 2-way switches wired to the same circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe switch requires a minimum mounting box depth of 16mm. This shallow depth makes it suitable for both standard back boxes and slimline installations in stud walls or where cavity depth is restricted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 10AX rating mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e10AX means the switch is rated for 10 amps on alternating current, handling loads up to 2,300W on 230V mains supply. This is sufficient for most domestic and commercial lighting circuits including multi-bulb fittings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the matt black finish durable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe matt black finish is a powder-coated steel surface that resists everyday handling and minimises visible fingerprints compared to gloss finishes. For best results, clean with a dry microfibre cloth rather than chemical sprays.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293699170571,"sku":"CL2MBB","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1554016_f03ef440-a31f-4bdf-9dba-3268a8332562.jpg?v=1714662798"},{"product_id":"10ax-2-gang-2-way-switch-matt-black-rounded-edge","title":"10AX 2 Gang 2-Way Switch - Matt Black Rounded Edge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 2-gang 2-way switch provides two-location control of lighting circuits behind a matt black rounded-edge faceplate with matching metal rockers. The 10AX rating handles loads up to 2,300W per gang on 230V circuits, making it suitable for both LED and traditional lighting installations where switching occurs from two different points in a room, hallway or staircase.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installation, the switch fits a standard 16mm minimum back box depth and uses screw terminals for wiring. The 2-way configuration allows a single lighting circuit to be controlled from two separate switch positions — common in corridors, landings and rooms with multiple entry points. The built-in gasket provides moisture resistance to IP20 standard, protecting the internal mechanism in normal indoor environments.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish is applied to premium-grade steel, giving the 87.75mm square faceplate a low-sheen surface that resists fingerprints and softens reflections under artificial light. The rounded edge profile sits 7.5mm proud of the wall once installed, creating a subtle three-dimensional detail that distinguishes it from flat-edge alternatives. The matching metal rockers maintain colour and finish consistency across the entire plate.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901283_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2-way switching allows a single lighting circuit to be controlled from two different switch positions. This is typically used in hallways, staircases and rooms with multiple entry points where you need to turn lights on or off from either end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between rounded edge and flat edge?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe rounded edge profile adds a 7.5mm projection from the wall with gently contoured corners. Flat-edge plates sit closer to the wall with sharper corners. The rounded design creates a softer visual detail and is easier to clean around.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 16mm minimum back box depth is needed for installation. This is a standard depth for UK switch back boxes and allows sufficient space for cable termination behind the switch mechanism.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the matt black finish durable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe matt black finish is applied to premium-grade steel and carries a 25-year warranty. The low-sheen surface resists fingerprints better than gloss finishes and maintains its appearance under normal residential and commercial use.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293699367179,"sku":"CL3MBB","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1554014_b0f42e22-5ea3-49b6-9363-6fde10353ef1.jpg?v=1714662803"},{"product_id":"10ax-3-gang-2-way-switch-matt-black-rounded-edge","title":"10AX 3 Gang 2-Way Switch - Matt Black Rounded Edge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 3-gang 2-way switch provides independent control of three separate lighting circuits, with each circuit switchable from two different locations in the room. The switch sits behind a matt black rounded-edge steel plate measuring 87.75mm square with a 7.5mm projection from the wall once fitted to a standard 16mm minimum back box.\u003c\/p\u003e\n\u003cp\u003eDesigned for living rooms, hallways, kitchens and office spaces where multiple lighting zones need coordinated control, the 2-way switching allows a ceiling light, wall lights and downlights to be switched both at the door and from a second position across the room. The 10AX rating handles lighting loads up to 2,300W per gang, comfortably covering typical LED, halogen and incandescent circuits. Each rocker operates independently, so one circuit can be on while the others are off.\u003c\/p\u003e\n\u003cp\u003eThe premium-grade steel plate is finished in a low-sheen matt black that pairs with industrial, contemporary and minimalist interiors without the reflections of polished finishes. The rounded edge softens the profile against the wall compared to square-edge plates, and a built-in gasket behind the plate protects the terminals from dust ingress. The switch is certified to EN 60669-1 and carries a 25-year warranty, indicating Knightsbridge's confidence in the mechanical longevity of the rocker mechanism and terminal connections.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901286_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2-way switching allows each of the three lighting circuits to be controlled from two different switch positions in the room. For example, you can turn a ceiling light on at the door and off from a switch at the other end of the hallway. This requires a matching 2-way switch at the second location and appropriate wiring between the two switches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 16mm minimum back box depth is needed. The plate adds 7.5mm of projection from the wall surface once installed, giving a total depth of approximately 23.5mm from the back of the box to the front of the switch rockers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat load can each gang handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach gang is rated at 10AX, which handles lighting loads up to 2,300W at 230V. This comfortably covers typical LED downlight circuits, halogen spotlights and filament bulb circuits without risk of overloading the switch mechanism.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the matt black finish be paired with other Knightsbridge ranges?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Knightsbridge produces sockets, dimmers, toggles and data plates in matching matt black rounded-edge steel, allowing a consistent finish across all electrical accessories in a room. Use the search function or filters to find matching products in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293699432715,"sku":"CL4MBB","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1554012_839464fd-d5d8-442d-839b-58784ffd0476.jpg?v=1714662806"},{"product_id":"10ax-4-gang-2-way-switch-matt-black-rounded-edge","title":"10AX 4 Gang 2 Way Switch - Matt Black Rounded Edge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 4-gang 2-way switch provides four independent lighting circuits behind a matt black rounded-edge faceplate with matching metal rockers. Each gang is rated at 10AX (2,300W on 230V mains), making this switch suitable for high-load lighting installations including multiple ceiling circuits, LED driver runs, and mixed lighting zones across larger rooms or open-plan spaces.\u003c\/p\u003e\n\u003cp\u003eDesigned for two-way switching applications where a single circuit is controlled from two separate wall locations, the switch suits hallways, staircases, living rooms with multiple entry points, and master bedrooms with door and bedside control positions. The rounded-edge profile sits 7.5mm proud of the wall once fitted to a 16mm minimum back box, giving a softer visual finish than sharp-edged plates and reducing the impact of minor wall imperfections.\u003c\/p\u003e\n\u003cp\u003eThe faceplate is stamped from premium-grade steel with a low-sheen matt black powder-coat finish that resists fingerprints better than gloss black and pairs comfortably with contemporary, industrial and minimalist interiors. Each rocker is colour-matched to the faceplate and pivots on a brass-bushed mechanism. The switch is certified to EN 60669-1 and carries a 25-year warranty. A built-in gasket behind the faceplate improves the seal against the wall and simplifies alignment during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e146.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901291_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is 2-way switching and where is it used?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2-way switching allows a single lighting circuit to be controlled from two separate wall switches. This configuration is common in hallways, staircases, large living rooms with multiple entry points, and master bedrooms where lights are controlled from both the door and the bedside. Each gang on this switch supports independent 2-way wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 16mm minimum back box depth is needed. The switch adds 7.5mm of projection from the wall once fitted. The rounded-edge profile helps disguise minor wall irregularities better than sharp-edged plates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the load rating per gang?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach gang is rated at 10AX, which handles up to 2,300W on 230V mains. This rating suits high-load lighting circuits including multiple ceiling fittings, LED driver runs, and mixed lighting zones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this 4-gang 2-way switch in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, stainless steel and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293699498251,"sku":"CL41MBB","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1554010_04f5c927-8f3c-44c8-a2a8-d273c16c6cc2.jpg?v=1714662809"},{"product_id":"10ax-6-gang-2-way-switch-matt-black-rounded-edge","title":"10AX 6 Gang 2-Way Switch - Matt Black Rounded Edge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 6-gang 2-way switch provides six independent lighting circuits controlled from two locations, finished in matt black premium-grade steel with a rounded edge profile. The 2-way configuration allows each circuit to be switched on or off from either of two wall positions, suited to rooms with multiple entry points or long corridors where control at both ends is needed.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installation, the switch fits a 16mm minimum back box depth and uses matching matt black metal rockers that sit flush with the faceplate. The rounded edge profile softens the visual presence on the wall compared to sharp-edged alternatives, making it a practical choice for both modern minimalist interiors and industrial-style spaces where matt black metalwork is used as a design accent.\u003c\/p\u003e\n\u003cp\u003eThe 10AX rating handles lighting loads up to 2,300W per gang at 230V, which comfortably covers LED, halogen and incandescent circuits in typical domestic and commercial applications. The steel construction provides durability in high-traffic areas, and the matt black finish resists fingerprints better than polished alternatives. An integrated gasket behind the faceplate ensures a tight fit to the wall surface during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\" style=\"width: 100%; height: 235.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eHeight\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eWidth\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e146.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eProjection\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eClass\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eIP Rating\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eTerminal\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901292_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2-way switching allows each lighting circuit to be controlled from two separate wall locations. This is used in rooms with multiple entry points or long corridors where you need to switch lights on or off from either end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 16mm minimum back box depth is needed for safe installation. The faceplate adds 7.5mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat load can each gang handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach gang is rated at 10AX, which handles lighting loads up to 2,300W at 230V. This covers typical domestic and commercial LED, halogen and incandescent lighting circuits without issue.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this 6-gang 2-way switch in multiple finishes including polished chrome, brushed chrome, polished brass, antique brass and white. Use the search function to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293699563787,"sku":"CL42MBB","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1554006_070972c8-5ce2-417f-b6b2-cb9644721bfb.jpg?v=1714662811"},{"product_id":"20a-1-gang-dp-switch-matt-black-rounded-edge","title":"20A 1 Gang DP Switch - Matt Black Rounded Edge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 20A 1-gang double pole switch controls high-powered fixed appliances such as water heaters, immersion heaters and electric showers from a wall-mounted position. The switch is built around a premium-grade steel faceplate finished in matt black, with softly rounded edges and a matching metal rocker that sits flush with the plate when in the off position.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installations where a dedicated appliance isolator is needed, the 20A rating handles loads up to 4,600W on a 230V circuit. The double pole switching isolates both live and neutral lines when turned off, providing safer isolation than single-pole switches for high-draw appliances. The switch fits a standard 25mm minimum back box depth and uses screw terminals compatible with typical UK ring and radial circuit wiring.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish provides a low-sheen surface that resists fingerprints and pairs cleanly with contemporary, industrial and monochrome interiors. The rounded edge design softens the transition between faceplate and wall, giving a more refined profile than sharp-edged alternatives. An integrated gasket around the back of the faceplate improves the fit against the wall and reduces the chance of movement once installed. The switch is certified to EN 60669-1 and carries a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\" style=\"width: 100%; height: 215.6px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eHeight\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eWidth\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eProjection\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eClass\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eIP Rating\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eTerminal\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901327_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat appliances is this switch suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 20A rating makes it suitable for water heaters, immersion heaters, electric showers and other fixed appliances drawing up to 4,600W on a 230V circuit. It is not designed for general lighting or socket circuits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is double pole switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDouble pole switching isolates both the live and neutral lines when the switch is turned off, rather than just the live line as in single-pole switches. This provides safer isolation for high-powered appliances during maintenance or servicing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is required for safe installation. The faceplate itself projects 7.5mm from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the rounded edge style available in other finishes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Knightsbridge produces this rounded edge range in multiple finishes including polished chrome, brushed chrome, polished brass, antique brass and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293700677899,"sku":"CL834MBB","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1554066_df1edb6d-479d-45f6-8608-4ca0822ba4e6.jpg?v=1714662839"},{"product_id":"20a-1-gang-dp-switch-neon-flex-outlet-matt-black-rounded-edge","title":"20A 1 Gang DP Switch Neon \u0026 Flex Outlet - Matt Black Rounded Edge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge 20A 1-gang double pole switch combines a rocker switch, neon indicator and flex outlet behind a matt black rounded edge faceplate made from premium-grade steel. The double pole switching isolates both live and neutral when turned off, meeting the requirements for fixed appliances such as water heaters, immersion heaters and bathroom extractor fans rated up to 4,600W on 230V mains.\u003c\/p\u003e\n\u003cp\u003eDesigned for fixed appliance installation in kitchens, utility rooms and bathrooms (outside zones 0-2), the switch mounts to a standard 25mm minimum back box. The flex outlet allows a cable to exit the faceplate directly, eliminating the need for a separate outlet plate and giving a cleaner wall finish when connecting hardwired appliances. The neon indicator glows red when the switch is in the 'on' position, providing a visible status check from across the room.\u003c\/p\u003e\n\u003cp\u003eThe rounded edge profile gives a 7.5mm projection from the wall and includes an integrated gasket around the plate edge for a secure fit against the back box. The matt black finish is powder-coated over steel rather than plastic, giving a harder-wearing surface that resists scratches and fingerprints better than polymer alternatives. The matching metal rocker blends into the faceplate when viewed from an angle. Certified to EN 60669-1 and backed by a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901328_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat appliances is this switch suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 20A rating handles fixed appliances up to 4,600W on 230V mains, including water heaters, immersion heaters, bathroom extractor fans and towel radiators. It is not suitable for standard plug-in appliances — those require a 13A socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the neon indicator show?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe neon glows red when the switch is in the 'on' position, providing a visible status check. This is particularly useful for appliances installed out of sight, such as immersion heaters in airing cupboards or extractor fans behind ceiling grilles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the flex outlet for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe flex outlet allows a cable to exit the faceplate directly, avoiding the need for a separate cable outlet plate on the wall. This gives a cleaner finish when hardwiring appliances and is standard practice for water heater and immersion heater installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, but only outside zones 0, 1 and 2. The IP20 rating means it is not splash-proof and must be installed at least 600mm from a bath or shower enclosure. For positions inside zone 2 or closer to water sources, a pull-cord switch with a higher IP rating is required.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293700743435,"sku":"CL834FMBB","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1554064_2f3c255d-8aae-4962-b73e-df987816fb4f.jpg?v=1714662842"},{"product_id":"20a-1-gang-dp-switch-with-neon-matt-black-rounded-edge","title":"20A 1 Gang DP Switch with Neon - Matt Black Rounded Edge","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 20A 1-gang DP switch provides double-pole switching for fixed high-power appliances such as water heaters, immersion heaters and storage heaters, rated to 4,600W at 230V. The matt black rounded-edge faceplate is made from premium-grade steel with a matching matt black metal rocker, and includes a red neon indicator above the rocker to show when the circuit is live.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchen, utility room and bathroom installation where a dedicated 20A circuit is required by Building Regulations, the double-pole operation isolates both live and neutral lines when switched off. The neon indicator allows occupants to verify at a glance whether an appliance circuit is energised, which is particularly useful for immersion heaters and other appliances that operate out of sight. The switch fits a standard 25mm minimum back box depth and uses screw terminals for cable connection.\u003c\/p\u003e\n\u003cp\u003eThe rounded-edge design has gently curved corners rather than the sharp 90-degree edges of traditional flat-plate switches, giving a softer profile against the wall. The matt black finish provides a low-reflectance surface that pairs with contemporary matt black taps, door furniture and kitchen appliances. A built-in gasket between the faceplate and wall improves the seal and reduces the risk of dust ingress. The switch is certified to EN 60669-1 and carries a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_5901330_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat appliances require a 20A DP switch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWater heaters, immersion heaters, storage heaters and other fixed appliances drawing between 13A and 20A typically require a dedicated 20A double-pole switch on a separate circuit. Building Regulations often mandate DP switching for immersion heaters to allow safe isolation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the neon indicator show?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe red neon indicator above the rocker illuminates when the switch is in the 'on' position and the circuit is live. This allows occupants to verify at a glance whether an appliance such as an immersion heater is currently powered, which is useful for appliances that operate out of sight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between rounded edge and flat plate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRounded-edge switches have gently curved corners and a slightly raised profile, giving a softer appearance than traditional flat-plate switches with sharp 90-degree edges. The rounded-edge style is popular in contemporary interiors alongside other curved-edge fixtures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating means the switch is suitable for dry indoor locations. In bathrooms, 20A switches must be installed outside zones 0, 1 and 2 as defined in BS 7671 wiring regulations, typically at least 600mm from a bath or shower enclosure, or outside the bathroom entirely.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293700808971,"sku":"CL834NMBB","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1561228_a17835aa-32c4-4213-b93a-5d48371ad931.jpg?v=1714662844"},{"product_id":"10ax-1-gang-dp-switch-matt-black-screwless","title":"10AX 1 Gang DP Switch - Matt Black Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 1-gang DP switch provides double pole switching for dual-circuit control behind a matt black screwless faceplate. The 10AX rating handles loads up to 2,300W on 230V mains, making it suitable for bathroom fan boost controls, heater circuits, or any application where both live and neutral lines need to be isolated when switched off.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installation, the switch fits a shallow 16mm minimum back box depth and uses a screwless cover plate that clips onto a separate metal sub-frame. This means there are no visible screws or fixings on the wall once installed, giving a cleaner finish than traditional screw-fixed plates. The built-in gasket behind the cover plate provides additional moisture resistance, and the IP20 rating confirms suitability for dry indoor environments.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish is a low-sheen powder-coated steel that minimises fingerprints and reflections, pairing comfortably with contemporary, industrial and minimalist interiors. The rocker switch sits flush within the plate aperture and matches the matt black finish across the entire faceplate. The switch is certified to EN 60669-1 and carries a 25-year warranty from Knightsbridge.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6308150_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does double pole (DP) switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDouble pole switching isolates both the live and neutral lines when the switch is in the off position, providing additional safety over single-pole switching. This is commonly required for bathroom fan boost controls, heater circuits, and certain appliances where both conductors need to be isolated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 16mm minimum back box depth is needed for safe installation. The screwless cover plate adds approximately 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the switch and re-clipped without re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293725286667,"sku":"SF1000DPMBB","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1626616_e30870b6-dd62-4984-b0bf-153801e9f1d0.jpg?v=1714663330"},{"product_id":"10ax-2-way-pull-cord-switch-black-nickel","title":"10AX 2 Way Pull Cord Switch - Black Nickel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 2-way pull cord switch is a ceiling-mounted switch with a 1.5m black cord ending in a matching black nickel pull tip. Rated at 10AX on 230V, it handles lighting loads up to 2,300W and functions as a 2-way switch, allowing the same light to be controlled from this ceiling switch and a second wall switch elsewhere in the room.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, utility rooms, garages and loft spaces where wall-mounted switches are impractical or need to be positioned away from water zones, the pull cord offers control from floor level without reaching for a fixed switch. The 74mm diameter ceiling plate fits standard UK ceiling boxes, and the IP20 rating suits indoor dry locations including bathroom zone 3. The thermoset resin construction and steel internals give the switch Class II double-insulated status, so no earth connection is required during installation.\u003c\/p\u003e\n\u003cp\u003eThe black nickel finish provides a dark metallic tone that sits between gunmetal and graphite, pairing well with darker bathroom fittings, industrial-style interiors and contemporary monochrome schemes. The 1.5m cord length positions the pull tip at approximately chest height in rooms with 2.4m ceilings, and can be shortened on installation if needed. Knightsbridge backs this switch with a 25-year warranty, reflecting the durability of the thermoset resin body and screw terminals.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e74 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e36 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eThermoset resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3768769_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way mean on a pull cord switch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2-way allows the same light to be controlled from this ceiling pull cord and a second switch elsewhere in the room, typically a wall switch near the door. This is common in bathrooms where a wall switch outside the door controls the main light, and the pull cord inside offers a second control point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP20 rating suits bathroom zone 3, which is any area more than 2.25m from a bath or shower cubicle, or above 2.25m height. It cannot be installed directly above a bath or inside a shower enclosure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat wattage can it handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 10AX rating handles up to 2,300W at 230V. This is sufficient for most domestic bathroom lighting loads, including multiple LED downlights or a fluorescent tube fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the cord be shortened?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 1.5m cord can be cut to a shorter length during installation to suit the room height. In standard 2.4m ceiling rooms the pull tip hangs at approximately chest height when left at full length.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293739868427,"sku":"8300BN","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/329612_01ed5139-242b-4523-ba57-de6c151873e5.jpg?v=1714663531"},{"product_id":"10ax-2-way-pull-cord-switch-matt-black","title":"10AX 2-Way Pull Cord Switch - Matt Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 2-way pull cord switch is a 74mm diameter ceiling-mounted switch in matt black thermoset resin with a 1.5m black braided cord and matching black pull tip. The 10AX rating handles lighting loads up to 2,300W on 230V mains, covering most domestic and light commercial lighting circuits including multi-bulb ceiling fittings and bathroom downlight arrays.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, utility rooms, closets and any space where a wall switch is impractical or outside arm's reach, the 1.5m cord length allows the pull tip to hang at a comfortable height for most ceiling installations between 2.4m and 2.7m. The 2-way configuration enables the switch to work in conjunction with a second switch elsewhere in the room, so the same light can be controlled from two locations. The screw terminals accept standard single-core or stranded cable.\u003c\/p\u003e\n\u003cp\u003eThe thermoset resin housing resists impact and heat better than standard plastic, and the matt black finish conceals dust and fingerprints more effectively than gloss. The IP20 rating permits installation in bathroom zones 3 and outside, but not in shower enclosures or directly above baths where higher IP ratings are required. The 36mm projection from the ceiling keeps the switch body low-profile once fitted, and the Class II double-insulation means no earth connection to the switch body is needed (though an earth terminal is provided for the circuit continuation).\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e74 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e36 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eThermoset resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eScrew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3491024_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_412752.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP20 rating permits installation in bathroom zone 3 and outside zones (more than 600mm from a bath or shower). It cannot be fitted directly above a bath or inside a shower enclosure, where IP44 or higher is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 2-way switch can work in conjunction with a second switch to control the same light from two locations. If you only need one switch controlling one light, the 2-way configuration still works — you simply wire it as a 1-way and leave one terminal unused.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat load can it handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 10AX rating handles lighting loads up to 2,300W on 230V mains. This covers most domestic lighting circuits including multi-bulb ceiling fittings, downlight arrays and bathroom lighting with multiple GU10 or E27 bulbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the cord length adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cord is fixed at 1.5m and cannot be shortened or lengthened. For ceiling heights between 2.4m and 2.7m the pull tip hangs at a comfortable reach height. If your ceiling is higher or lower, consider whether the tip will be accessible before ordering.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293739933963,"sku":"8300MB","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/210554_e389c096-cdf9-4baf-ab35-a42fc6566ad2.jpg?v=1714663534"},{"product_id":"ip66-20ax-1-gang-2-way-outdoor-switch-black","title":"IP66 20AX 1 Gang 2-Way Outdoor Switch - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge OP2 is a 20AX 1-gang 2-way switch built for outdoor installation, enclosed in a black polycarbonate housing rated IP66 for protection against dust ingress and high-pressure water jets. A blue LED above the circular rocker indicates switch activity and provides location visibility in low light, making it easier to find the switch on an external wall after dark.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor lighting circuits, garden features, outdoor security lighting and covered patio installations, the switch mounts directly to exterior walls without needing a separate back box. The IP66 and IK06 ratings mean the switch resists rain, snow, dust and impact from moderate mechanical shock (equivalent to a 1kg mass dropped from 200mm). The 20AX rating handles up to 4,600W on 230V supply, suitable for multiple outdoor light circuits or high-wattage floodlights.\u003c\/p\u003e\n\u003cp\u003eThe 90mm square housing projects 66mm from the wall once fitted, with multiple 20mm cable entry points around the perimeter allowing flexible cable routing from above, below or either side. The polycarbonate body resists UV degradation and temperature cycling between -5°C and +40°C without cracking or colour fade. The circular rocker mechanism is sealed behind the faceplate to prevent water ingress during operation, and the earth terminal provides Class II protection for metal light fittings.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e66 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1881402_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_827702.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP66 mean for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP66 means the switch is protected against dust ingress (first 6) and high-pressure water jets from any direction (second 6). This makes it suitable for exposed outdoor walls, covered patios and areas subject to rain and hosing down, but not continuous submersion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the 20AX rating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e20AX means the switch can handle up to 20 amps on 230V supply, equivalent to 4,600W. This is sufficient for multiple outdoor light circuits, high-wattage floodlights or a combination of security lights on a single circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2-way switching allows the same light or circuit to be controlled from two different switch locations. To set this up you need two 2-way switches wired with a 3-core cable between them, allowing either switch to turn the circuit on or off independently.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the blue LED for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe blue LED illuminates when the switch is in the 'on' position, providing both activity indication (confirming the circuit is live) and location visibility in low light, making it easier to find the switch on an external wall after dark.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293915111691,"sku":"OP2","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/233310_26d2363e-aaf8-44f6-a1b3-8411f75bc137.jpg?v=1714666193"},{"product_id":"ip66-20ax-1-gang-retractive-switch-black-with-blue-led","title":"IP66 20AX 1 Gang Retractive Switch - Black with Blue LED","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge OP21 is a 20AX 1-gang retractive switch built into a weatherproof IP66-rated polycarbonate enclosure in matt black. The switch returns to its off position after being pressed, making it suitable for momentary-contact applications such as electric gate controls, garage door openers, security system triggers and doorbell circuits. A blue LED indicator sits above the large circular rocker switch, providing location visibility in low light and activity confirmation when the switch is pressed.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor installation where water ingress and impact resistance are required, the switch carries an IP66 rating (protected against heavy jets of water from any direction) and an IK06 impact rating (protected against 1 joule impacts). The 90mm square enclosure mounts directly to walls, gate posts, garage door frames and external surfaces using the four corner fixing holes. Multiple 20mm cable entry\/exit points around the enclosure allow cables to enter from the most convenient direction for the installation.\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate construction resists UV degradation and temperature extremes better than standard ABS plastic, maintaining structural integrity and finish over years of outdoor exposure. The 20AX rating handles loads up to 4,600W on 230V circuits, making it suitable for controlling higher-draw devices such as motorised gates and industrial door mechanisms. The retractive function means the switch must be held down to maintain contact, returning to the open position when released — this is the standard requirement for gate and garage door controls to prevent accidental sustained activation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e66 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1881408_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_827698.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does retractive mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA retractive switch returns to the off position automatically when you release it, unlike a standard toggle switch that stays in position. This makes it suitable for gate controls, garage doors and security triggers where you need momentary contact rather than latching operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in the rain?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP66 rating means the switch is protected against heavy water jets from any direction and is suitable for permanent outdoor installation exposed to rain, snow and hose-down cleaning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the blue LED for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe blue LED serves two functions: it provides location visibility in low light so you can find the switch at night, and it illuminates when the switch is pressed to confirm the circuit has been activated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat load can it handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 20AX rating allows the switch to handle up to 4,600W on a 230V circuit. This is sufficient for motorised gates, garage door openers and most outdoor security lighting circuits.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293915537675,"sku":"OP21","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/233330_1892d5da-116b-4a5a-8dc0-390fc7cb7e4c.jpg?v=1714666196"},{"product_id":"ip66-20ax-2-gang-sp-2-way-outdoor-switch-black","title":"IP66 20AX 2 Gang SP 2-Way Outdoor Switch - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge OP3 is a 2-gang 20AX single-pole 2-way outdoor switch housed in a black polycarbonate IP66-rated enclosure with a built-in blue LED activity indicator. The switch features two semi-circular rocker switches mounted behind a sealed front panel, with multiple 20mm cable entry points positioned around the housing to allow cable runs from above, below or either side.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor lighting control, garage lighting, garden security lighting and covered outdoor areas where weatherproof switching is required, the IP66 rating protects against high-pressure water jets and dust ingress. The IK06 impact rating handles knocks from garden equipment, foot traffic and accidental contact without cracking the housing. The 20AX rating allows each gang to switch loads up to 4,600W at 230V, making it suitable for multiple outdoor floodlights or high-wattage garden lighting circuits on a single switch.\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate construction resists UV degradation better than standard ABS plastics, maintaining the black finish and structural integrity through years of outdoor exposure. The blue LED indicator lights when the switch is active, making the switch visible at night and confirming circuit status from a distance. The Class II construction means the switch does not rely on an earth connection for safety, though an earth terminal is provided for circuit continuity. Multiple cable entries accept standard 20mm conduit glands or grommets, and unused entries are sealed with blanking plugs supplied with the switch.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e66 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1881544_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_827696.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP66 mean for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP66 provides complete protection against dust and protection against high-pressure water jets from any direction. The switch can be mounted on an external wall exposed to rain, but should not be submerged or installed where standing water can collect around the base. The IK06 impact rating means it withstands 1 joule impacts, equivalent to a 500g mass dropped from 200mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat load can each gang switch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach gang is rated 20AX at 230V, allowing it to switch resistive loads up to 4,600W or inductive loads (motors, transformers) up to approximately 1,000W. For outdoor LED floodlights this typically means 10-15 high-wattage fittings per gang, depending on individual fitting wattage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the switch wired for 2-way operation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs a single-pole 2-way switch, each gang requires a live supply, a switched live output, and a common terminal. For 2-way operation between two switches, a second OP3 or compatible 2-way switch is connected via strappers (two additional cables running between the common terminals). See the manual in the Downloads section for the wiring diagram.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan unused cable entries be sealed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The switch includes blanking plugs for unused 20mm cable entry points. These must be fitted to maintain the IP66 rating. If using conduit, fit appropriate 20mm IP66-rated glands to each entry point in use.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293915635979,"sku":"OP3","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/233334_ba68bba2-57ce-4e4c-a8db-b083943ce494.jpg?v=1714666198"},{"product_id":"ip66-13a-3-gang-remote-controlled-switch-box-black-polycarbonate","title":"IP66 13A 3 Gang Remote Controlled Switch Box - Black Polycarbonate","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP66 remote controlled switch box provides three independently switched outputs rated at 13A combined, housed in a black impact-resistant polycarbonate enclosure with IP66 and IK06 protection against water ingress and mechanical impact. The unit operates via a supplied handheld remote control with a range of 10-20m depending on surrounding obstacles and RF interference.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor lighting control, garden power tools, Christmas lights and external audio systems where remote switching avoids running back to an indoor wall switch or consumer unit. The three outputs comprise one 8A-rated channel and two 2.5A-rated channels, allowing higher-draw devices like electric hedge trimmers or pressure washers on channel one and decorative lighting or audio on channels two and three. Four 20mm cable entry glands on the base and side accept standard outdoor cable runs, and the earth terminal accommodates protective bonding where required.\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate enclosure resists UV degradation, impact from garden tools and corrosion from salt spray in coastal environments. The IP66 rating permits installation in fully exposed positions including mounting on external walls, fence posts and garden structures where rain, hose spray and windblown dust are present. A neon indicator on the front panel shows when mains power is connected. The remote control requires one AAA battery (not included) and pairs with the receiver inside the enclosure on first use.\u003c\/p\u003e\n\u003cp\u003eThe unit carries Class I earthing and is certified to EN 61058 (switches for appliances), EN300\/EN301 (radio equipment directive) and EN 62479 (electromagnetic field exposure). Dimensions are 160mm wide, 103mm tall and 58mm projection from the mounting surface once the cable glands are fitted. Suitable for UK 230V 50Hz mains only.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e103.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e160.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e58 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3702834_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1189116.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the range of the remote control?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe remote operates at 10-20m depending on the environment. Brick walls, metal structures and dense foliage reduce the effective range, while open gardens or clear line-of-sight installations allow the full 20m. The remote requires one AAA battery (not included).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the individual channel ratings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChannel 1 is rated at 8A, suitable for higher-draw devices like power tools or pumps. Channels 2 and 3 are rated at 2.5A each, typically used for decorative lighting, audio systems or low-power garden equipment. The combined maximum across all three channels is 13A.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in fully exposed outdoor positions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP66 rating protects against heavy rain, hose spray and windblown dust. The IK06 impact rating provides protection against mechanical impact from garden tools and debris. The polycarbonate construction resists UV degradation and corrosion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the remote paired with the unit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe remote and receiver pair automatically on first use. If you need to pair a replacement remote or clear existing pairings, consult the product manual linked in the Downloads section above.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293915865355,"sku":"OP663GBK","price":65.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/503132_2d2c5f6a-4f1b-418c-816d-b5cf8bddd69b.jpg?v=1714666203"},{"product_id":"ip66-13a-5-gang-remote-controlled-switch-box-black-weatherproof","title":"IP66 13A 5 Gang Remote Controlled Switch Box - Black Weatherproof","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge OP665GBK is a weatherproof 5-gang remote control switch box rated IP66 and IK06, built from impact-resistant black polycarbonate. The unit provides five individually switched outlets controlled wirelessly from the supplied remote handset, with a maximum 13A combined load across all five gangs. Each gang carries different current ratings: one at 5A, two at 2.5A, one at 2A, and one at 1A, allowing mixed loads from outdoor lighting circuits to garden pumps and power tools.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor installation where mains switching is needed without hard-wired wall switches, the box suits garden lighting control, outbuilding power distribution, caravan site hookups, and temporary event power. The IP66 rating protects against dust ingress and powerful water jets from any direction, while the IK06 impact rating provides moderate mechanical protection against knocks and accidental strikes. Six 20mm cable entry glands on the base allow in-feed and outgoing cable runs with sealed entries.\u003c\/p\u003e\n\u003cp\u003eThe remote control operates at 10-20m range depending on environmental interference and line-of-sight, using a 433MHz RF signal that does not require pointing the handset directly at the box. Each of the five buttons on the remote corresponds to one gang on the switch box, and each gang has a neon indicator on the front face showing whether that outlet is live. The remote requires one 1.5V AAA battery (not supplied). The polycarbonate housing measures 225mm wide, 103mm high, and projects 58mm from the mounting surface once installed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e103.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e225.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e58 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4130804_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1189114.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum combined load across all five gangs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unit is rated at 13A maximum across all five outlets combined. Individual gangs carry different ratings: one 5A, two at 2.5A, one at 2A, and one at 1A. Total connected load must not exceed 13A at 230V (approximately 3,000W).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP66 mean for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP66 provides complete dust-tightness and protection against powerful water jets from any angle. The unit can be mounted outdoors in exposed positions and will withstand heavy rain, hose-down cleaning, and coastal spray, but it is not rated for continuous submersion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the box mounted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate housing has mounting points on the rear for screw-fixing to a wall, fence post, or backing board. Cable entries are on the base, so the unit is typically mounted vertically with the control buttons and neon indicators facing forward.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the range of the remote control?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe remote operates at 10-20m depending on obstacles, metal structures, and RF interference in the environment. It uses 433MHz RF signalling, so it does not require line-of-sight to the switch box — you can operate it through walls and around corners within range.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293915996427,"sku":"OP665GBK","price":84.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/503146_0f982059-58a7-443b-aa22-5e7629a185f5.jpg?v=1714666206"},{"product_id":"ip55-photocell-switch-wall-mounted-dusk-to-dawn-timer-black","title":"IP55 Photocell Switch Wall Mounted Dusk to Dawn Timer - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge OS006B is an IP55-rated photocell switch with a dusk-to-dawn timer function, housed in a black polycarbonate case measuring 105mm × 79mm × 36mm. The unit automatically switches connected lighting on at dusk and off at dawn, with selectable duration settings of 2, 4, 6 or 8 hours to override the dawn sensor if needed.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor security lighting, shop window displays, and advertising signage, the photocell mounts directly to an external wall via four fixing points and connects inline between the mains supply and the lighting circuit. The IP55 rating protects against dust ingress and water jets from any direction, making the switch suitable for exposed positions under eaves, on outbuildings, and in commercial forecourts where rain and condensation are present.\u003c\/p\u003e\n\u003cp\u003eThe ambient light memory function allows the photocell to learn the light level at which it last switched on, so it adapts to seasonal changes in daylight hours without manual intervention. Switching capacity is rated at 1000W for incandescent loads, 500W for fluorescent or inductive loads, and 200W for LED loads on 230V 50Hz mains. The Class II construction means no earth connection is required during installation.\u003c\/p\u003e\n\u003cp\u003eThe photocell sensor sits behind a small lens on the front face of the unit and should be positioned where it has a clear view of the sky rather than facing artificial light sources or reflective surfaces. The duration override is useful for security applications where you want exterior lighting to remain on for a fixed period after dusk rather than burning until dawn.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e105 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e79 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e36 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3725257_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the ambient light memory function do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe photocell learns the light level at which it last activated and uses that threshold for future switching cycles. This means it adapts automatically to seasonal changes in daylight hours without needing manual adjustment or reprogramming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum LED load it can switch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unit is rated at 200W maximum for LED loads on 230V. For incandescent loads the rating is 1000W, and for fluorescent or inductive loads it's 500W. Exceeding these ratings may damage the switching mechanism or cause premature failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do the duration settings work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2\/4\/6\/8 hour duration settings override the dawn sensor. If you set 4 hours, the photocell switches on at dusk and then switches off after 4 hours regardless of whether it's still dark. This is useful for security lighting where you want a fixed burn time rather than all-night operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the IP55 rating mean it can be mounted in fully exposed positions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP55 protects against dust ingress and water jets from any direction, so the unit can handle rain and exposed mounting positions. However, mounting under an eave or soffit extends the lifespan by reducing direct exposure to UV and heavy weather.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293917995275,"sku":"OS006B","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/532840_eaf476d1-4f5b-46b3-9d62-af0e642c8c62.jpg?v=1714666242"},{"product_id":"10ax-fan-isolator-switch-black-nickel-screwless","title":"10AX Fan Isolator Switch - Black Nickel Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX fan isolator switch provides triple-pole isolation for bathroom extractor fans, kitchen ventilation units and utility room extractors. The black nickel screwless faceplate measures 87.5mm square with a 4.3mm projection from the wall, hiding the mounting screws behind a clip-on cover plate that sits flush with the wall surface.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, en-suites, kitchens and utility rooms where extractor fans require a dedicated isolator switch separate from the lighting circuit, the triple-pole configuration isolates live, neutral and the switched live fan feed simultaneously. This allows a fan to be safely isolated for maintenance or replacement without needing to isolate the main lighting circuit or switch off at the consumer unit. The switch fits a 16mm minimum back box depth and carries an IP20 rating for standard indoor dry locations.\u003c\/p\u003e\n\u003cp\u003eThe black nickel finish is a gunmetal-toned dark grey with a subtle metallic sheen, sitting between matt black and polished chrome in reflectivity. It pairs with contemporary bathrooms using dark hardware, industrial-style kitchens with exposed pipework, and modern interiors mixing dark metals with white sanitaryware. The screwless cover plate clips onto a separate metal sub-frame fixed to the back box, so there are no visible fixings on the wall once installed. The rocker mechanism is clear-marked OFF\/ON with a neutral indicator symbol for the isolated position.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1191994_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1288002.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a fan isolator switch used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA fan isolator switch allows an extractor fan to be switched off and isolated from the mains supply for maintenance, cleaning or replacement without needing to isolate the entire lighting circuit or switch off at the consumer unit. Building regulations in the UK typically require bathroom extractor fans to have a dedicated isolator located outside the bathroom zone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does triple-pole mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTriple-pole means the switch isolates three conductors simultaneously when switched to the OFF position: live, neutral, and the switched live feed to the fan. This provides complete isolation of the fan unit from the mains supply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating means this switch is suitable for dry indoor locations. In a bathroom it must be installed outside zones 0, 1 and 2 as defined in BS 7671 wiring regulations — typically this means positioning the isolator on the wall outside the bathroom door or in a hallway adjacent to the bathroom, not inside the bathroom itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces the screwless fan isolator switch in multiple finishes including polished chrome, brushed chrome, polished brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293921599755,"sku":"SF1100BN","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/344760_dac1e4dd-74d8-438f-adfa-ba13bc7ee176.jpg?v=1714666315"},{"product_id":"10ax-fan-isolator-switch-matt-black-screwless","title":"10AX Fan Isolator Switch - Matt Black Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX fan isolator switch provides triple-pole isolation for bathroom extractor fans, utility room ventilation and other fan units that need to be isolated independently of the lighting circuit. The matt black screwless faceplate measures 87.5mm square and clips onto a separate metal sub-frame, leaving no visible screws or fixings on the wall once fitted.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, en-suites, utility rooms and other spaces where an extractor fan requires dedicated switching, the triple-pole configuration isolates fan, live and neutral lines simultaneously when switched to the 'OFF' position. This allows the fan circuit to be isolated for maintenance or cleaning without switching off the lighting circuit. The built-in gasket behind the faceplate provides additional protection against moisture ingress in humid environments.\u003c\/p\u003e\n\u003cp\u003eThe switch requires a 16mm minimum mounting box depth, making it suitable for shallow back boxes in stud walls and plasterboard installations where deeper metal boxes cannot fit. The premium-grade steel construction carries IP20 rating for general interior use and is certified to EN 60669-1 and EN 60669-2-4 standards. Knightsbridge backs the switch with a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2796131_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1288004.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 16mm minimum mounting box depth is needed. The 4.3mm projection of the screwless cover plate adds minimal wall protrusion once fitted, making this switch suitable for shallow stud wall installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is triple-pole isolation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTriple-pole isolation means the switch breaks connections to the fan feed, live and neutral lines simultaneously when switched to 'OFF'. This allows the fan circuit to be isolated independently of the lighting circuit, which is useful for maintenance or cleaning the fan unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathroom use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe switch carries IP20 rating, which is suitable for general interior use including bathrooms outside zones 0, 1 and 2. The built-in gasket provides additional moisture protection behind the faceplate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces fan isolator switches in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293921927435,"sku":"SF1100MBB","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/365114_1ec3ce9b-2419-41fd-80c5-150e601fc151.jpg?v=1714666317"},{"product_id":"10ax-1-gang-intermediate-switch-black-nickel-screwless","title":"10AX 1 Gang Intermediate Switch - Black Nickel Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 1-gang intermediate switch is designed for three-switch circuits where a single light is controlled from three separate locations, such as a staircase with switches at the top, middle landing and bottom. The black nickel screwless faceplate clips onto a separate sub-frame, giving a clean finish with no visible fixings once installed.\u003c\/p\u003e\n\u003cp\u003eFitted between two-way switches in the circuit, the intermediate switch allows the light to be toggled on or off from any of the three positions without affecting the operation of the other switches. This is the standard configuration for staircases in three-storey homes, long hallways with switches at both ends and a midpoint, and split-level rooms where access exists at multiple heights.\u003c\/p\u003e\n\u003cp\u003eThe 10AX rating handles loads up to 2,300W at 230V, comfortably exceeding the requirements for domestic lighting circuits and ceiling fan controls. The black nickel finish provides a dark metallic tone that sits between gunmetal grey and charcoal, pairing well with industrial, contemporary and minimalist interiors. The faceplate is pressed from premium-grade steel and carries an IP20 rating for indoor use in dry locations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1191992_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1287984.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is an intermediate switch and when is it needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn intermediate switch is fitted between two two-way switches in a three-switch circuit, allowing a single light to be controlled from three separate locations. Common applications include staircases with switches at the top, middle and bottom, or long hallways where switches exist at both ends and a central point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 16mm minimum mounting box depth is needed. The screwless cover plate adds 4.3mm projection from the wall once clipped onto the sub-frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The black nickel cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the switch and re-clipped without disturbing the wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this intermediate switch style in polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other finishes in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293922615563,"sku":"SF1200BN","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/101714_a9ae8e0a-4910-427b-8894-77e214502f8e.jpg?v=1714666329"},{"product_id":"10ax-1-gang-intermediate-switch-matt-black-screwless","title":"10AX 1 Gang Intermediate Switch - Matt Black Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 1-gang intermediate switch provides the third control point in a 3-way lighting circuit, designed for staircases, long hallways and landing installations where lights need switching from three separate locations. The screwless matt black faceplate sits flush against the wall with a 4.3mm projection, concealing all fixings behind a clip-on cover plate that removes without tools for redecorating.\u003c\/p\u003e\n\u003cp\u003eAn intermediate switch sits between two 2-way switches in the circuit, converting the on\/off state from either direction. This allows a single light fitting or bank of lights to be controlled from three points — typically at the bottom of a staircase, the top landing, and a mid-floor position. The 10AX rating handles loads up to 2,300W at 230V, suitable for LED downlight banks, pendant circuits and wall light arrays.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish is a powder-coated steel faceplate with a low-sheen surface that resists fingerprints and pairs cleanly with industrial, contemporary and monochrome interiors. The matching rocker switch sits within a defined aperture in the plate, maintaining visual consistency across multi-gang installations. The switch requires a minimum 16mm back box depth and includes an earth terminal for Class I wiring. A built-in gasket provides IP20 moisture resistance for dry interior locations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2796138_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1288012.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between an intermediate switch and a 2-way switch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn intermediate switch sits between two 2-way switches in a 3-way lighting circuit. It has four terminals instead of the three found on a 2-way switch, allowing it to pass the switching signal from either direction. You cannot use an intermediate switch as the first or last switch in the circuit — those positions require 2-way switches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 16mm back box depth is required for safe installation. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for decorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The matt black cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed without tools for painting around the switch and re-clipped afterwards without re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this screwless intermediate switch in polished chrome, brushed chrome, polished brass, antique brass, stainless steel and white finishes. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293922943243,"sku":"SF1200MBB","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/183406_715559ff-69e1-47e4-8a96-dff802169da1.jpg?v=1714666331"},{"product_id":"10ax-1-gang-2-way-switch-black-nickel-screwless","title":"10AX 1 Gang 2-Way Switch - Black Nickel Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 1-gang 2-way switch controls lighting from two separate locations (e.g. top and bottom of stairs, both ends of a hallway) using a black nickel screwless faceplate with a matching metal rocker. The 10AX rating handles loads up to 2,300W on 230V mains, making it suitable for standard domestic and commercial lighting circuits.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential hallways, landings, staircases and commercial corridors where lighting needs to be controlled from two points, the switch uses 2-way wiring to link with a second 2-way switch elsewhere in the circuit. The screwless cover plate clips onto a separate metal sub-frame fixed to the back box, leaving no visible fixings on the wall once installed. The 4.3mm projection from the wall gives a low-profile finish that sits nearly flush with plaster or dry-lined surfaces.\u003c\/p\u003e\n\u003cp\u003eThe black nickel finish is a dark metallic grey-black with a semi-reflective sheen, achieved by plating premium-grade steel. This finish pairs well with contemporary, industrial and monochrome interiors, offering a harder-edged alternative to polished chrome or brass. The metal rocker matches the faceplate tone and operates with a positive click action. The switch requires a minimum 16mm back box depth, shallower than many competitors, which suits installations in stud walls or where box depth is limited.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1191979_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1288146.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 2-way switch allows a single light to be controlled from two separate locations. You need two 2-way switches wired together to create the circuit. Common applications include controlling landing lights from both upstairs and downstairs, or hallway lights from both ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 16mm back box depth is required. This is shallower than many competitor switches, making it suitable for stud wall installations or situations where a deeper back box cannot be fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The black nickel cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting or wallpapering around the switch and re-clipped without disturbing the wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this switch style in polished chrome, brushed chrome, polished brass, antique brass, matt black and white, among others. Use the search function or filters at Niori to find other finishes in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293924778251,"sku":"SF2000BN","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/100548_e2b99d96-0681-4f94-8dda-25889e6fdaa7.jpg?v=1714666357"},{"product_id":"10ax-1-gang-2-way-switch-matt-black-screwless-black-rocker","title":"10AX 1 Gang 2-Way Switch - Matt Black Screwless (Black Rocker)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 1-gang 2-way switch provides single-circuit lighting control behind a matt black screwless faceplate with a matching black rocker. The 10AX rating handles lighting loads up to 2,300W on 230V, making it suitable for circuits controlling multiple LED, halogen or incandescent fittings from two switching positions.\u003c\/p\u003e\n\u003cp\u003eDesigned for two-way lighting installations where a single circuit needs to be controlled from two separate locations — such as staircases, hallways, and rooms with multiple entrances — this switch uses standard UK wiring with dedicated earth terminal. The screwless cover plate clips onto a separate metal sub-frame fixed to the back box, leaving no visible screws or fixings on the wall once installed. The 87.5mm square format fits a standard single-gang UK mounting box with 16mm minimum depth.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish on the premium-grade steel faceplate provides a non-reflective surface that works in minimalist, industrial and contemporary interiors where black electrical accessories are used throughout. The 4.3mm projection from the wall gives a low-profile installation that sits close to the surface. The built-in gasket between the sub-frame and cover plate helps prevent dust ingress and maintains a clean edge around the rocker aperture. Certified to EN 60669-1 and backed by Knightsbridge's 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2539755_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1288150.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2-way switching allows a single lighting circuit to be controlled from two separate switch locations. This is typically used on staircases, hallways and bedrooms with entrances at opposite ends. You need two 2-way switches wired together to create this configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 16mm minimum back box depth is needed. This is shallower than most socket back boxes, making it suitable for installations where wall depth is limited.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for decorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The matt black cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the switch and re-clipped without disturbing the wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this screwless 1-gang 2-way switch in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass and white. Use the search function to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293925826827,"sku":"SF2000MBB","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/155564_8bf1c7ef-e9bf-41bd-be1a-32a1710608e8.jpg?v=1714666361"},{"product_id":"10ax-2-gang-2-way-switch-black-nickel-screwless","title":"10AX 2 Gang 2-Way Switch - Black Nickel Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 2-gang 2-way switch controls two independent lighting circuits from multiple locations, with each rocker rated at 10 amps (2,300W on 230V mains). The screwless faceplate in black nickel finish clips onto a separate metal sub-frame, hiding all fixing screws once installed. Both rockers are metal-finished to match the plate rather than white plastic, giving a unified appearance across the entire switch.\u003c\/p\u003e\n\u003cp\u003eDesigned for hallways, staircases and rooms with two entry points, the 2-way configuration allows lights to be controlled from either end of a corridor or at the top and bottom of stairs. The 10AX rating handles standard domestic lighting loads including LED, halogen and incandescent circuits. The switch fits a standard single-gang back box with a minimum 16mm depth and projects just 4.3mm from the wall once the screwless plate is clipped on.\u003c\/p\u003e\n\u003cp\u003eThe black nickel finish sits darker than polished chrome or brushed steel, presenting as a deep gunmetal grey with subtle warmth. The premium-grade steel construction includes a built-in gasket behind the faceplate, providing IP20 ingress protection and adding a degree of moisture resistance suitable for most residential interiors. The switch is certified to EN 60669-1 and carries a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e13.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1191983_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1288362.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 2-way switch can be wired to control the same light from two different locations, such as at either end of a hallway or at the top and bottom of stairs. This is a 2-gang 2-way switch, so it controls two separate lighting circuits, each switchable from two locations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between 10A and 10AX?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e10AX indicates the switch is rated for 10 amps and is suitable for both resistive loads (incandescent, halogen) and inductive loads (fluorescent, LED drivers with transformers). Standard 10A switches are rated for resistive loads only. The AX rating makes this switch compatible with modern LED lighting circuits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the screwless plate attach?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe visible faceplate clips onto a metal sub-frame that is screw-fixed to the back box. Once the sub-frame is wired and secured, the decorative plate clips on from the front without tools, hiding all screws and fixings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this switch style in polished chrome, brushed chrome, polished brass, antique brass, matt black and white finishes. Use the search or filter functions to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293929693451,"sku":"SF3000BN","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/100598_052d089a-2f35-4f13-b3ea-354457e0e26e.jpg?v=1714666396"},{"product_id":"10ax-2-gang-2-way-switch-matt-black-screwless-black-rockers","title":"10AX 2 Gang 2 Way Switch - Matt Black Screwless (Black Rockers)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 2-gang 2-way switch provides dual lighting control from two locations behind a matt black screwless faceplate with matching black metal rockers. The 2-way configuration allows the same light circuit to be switched from either end of a hallway, stairwell or room with multiple entry points, with each rocker controlling an independent circuit.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installations requiring a contemporary low-profile finish, the switch sits just 4.3mm proud of the wall once fitted. The screwless cover plate clips onto a separate metal sub-frame fixed to the back box, so there are no visible screws or fixings on the finished wall. The 10AX rating handles loads up to 2,300W per gang on standard 230V circuits, suitable for LED, halogen and incandescent lighting loads.\u003c\/p\u003e\n\u003cp\u003eThe faceplate is constructed from premium-grade steel with a matt black powder-coated finish that minimises fingerprints and reflections. The matching black metal rockers give a monochromatic finish that pairs with industrial, contemporary and minimalist interiors. A built-in gasket behind the faceplate provides IP20-rated moisture resistance for dry indoor use, and the shallow 16mm minimum back box depth allows installation in partition walls and retrofit applications where deeper boxes are impractical.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\" style=\"width: 100%; height: 235.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eHeight\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eWidth\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eProjection\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e13.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eClass\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eIP Rating\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 54.1858%; height: 19.6px;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"width: 43.3325%; height: 19.6px;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2539769_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1288372.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 2-way switch allows the same light circuit to be controlled from two different locations. This is typically used in hallways, staircases and rooms with multiple entry points, where you need to turn the lights on or off from either end. Each of the two rockers on this switch controls a separate circuit independently.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 16mm back box depth is needed for safe installation. This shallow depth makes the switch suitable for partition walls and retrofit installations where deeper back boxes are difficult to fit. The screwless cover plate adds 4.3mm of projection from the wall once installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the switch and re-clipped without disconnecting any wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this switch style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293929922827,"sku":"SF3000MBB","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/155566_e499d448-376c-479b-aef3-89b46d79e19f.jpg?v=1714666399"},{"product_id":"10ax-3-gang-2-way-switch-black-nickel-screwless","title":"10AX 3 Gang 2-Way Switch - Black Nickel Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 3-gang 2-way switch controls three separate lighting circuits from two different locations behind a black nickel screwless faceplate. Each gang is rated at 10AX (2,300W at 230V), handling both standard domestic lighting and higher loads such as multiple downlights or fluorescent circuits on a single gang.\u003c\/p\u003e\n\u003cp\u003eDesigned for multi-room installations where lighting is controlled from two positions — such as staircases, long hallways, or open-plan spaces with entry points at opposite ends — the 2-way switching routes power to either switch location depending on rocker position. The screwless cover plate clips onto a separate metal sub-frame, leaving no visible fixings on the wall once installed. The black nickel finish provides a dark gunmetal tone with subtle reflectivity, pairing well with industrial, contemporary and monochrome interiors.\u003c\/p\u003e\n\u003cp\u003eThe switch is built from premium-grade steel with matching metal rockers rather than plastic inserts, giving a consistent finish across the entire faceplate. A built-in gasket behind the cover plate provides dust and moisture resistance to IP20 standard, protecting the terminals and wiring connections in normal indoor environments. The 16mm minimum back box depth makes this compatible with standard UK back boxes without requiring a deep installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1191985_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1288394.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between 2-way and 1-way switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 2-way switch allows the same lighting circuit to be controlled from two different switch locations — typically used on staircases or in hallways with entry points at opposite ends. A 1-way switch controls the circuit from a single location only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 16mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the switch and re-clipped without re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this switch style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293930414347,"sku":"SF4000BN","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/100608_9d445210-c588-4cf5-925e-a3baf072f8e2.jpg?v=1714666412"},{"product_id":"10ax-3-gang-2-way-switch-matt-black-screwless","title":"10AX 3 Gang 2-Way Switch - Matt Black Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 3-gang 2-way switch controls three independent lighting circuits behind a matt black screwless faceplate with matching metal rockers. The 10AX rating handles circuit loads up to 2,300W per gang, suitable for standard domestic lighting, spotlights and LED driver circuits on 230V mains. The 2-way configuration allows each gang to be wired with a partner switch at a different location, giving two-point control over each lighting zone.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and commercial installations where clean wall finishes matter, the switch uses a screwless cover plate that clips onto a separate metal sub-frame fixed to the back box. Once installed, no visible screws or fixings appear on the wall. The 4.3mm projection from the wall gives a low-profile finish that sits nearly flush with the surface, reducing the visual weight of the switch compared to deeper-set traditional plates.\u003c\/p\u003e\n\u003cp\u003eThe faceplate is stamped from premium-grade steel with a powder-coated matt black finish that resists fingerprints and provides a soft, non-reflective surface. The metal rockers match the faceplate finish, creating a monochromatic appearance that pairs with industrial, minimalist and contemporary interiors. A built-in gasket behind the faceplate edge provides IP20 dust ingress protection. The switch requires a minimum 16mm back box depth and is certified to EN 60669-1.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_2539774_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1288406.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2-way switching allows each gang to be controlled from two different switch locations. This is standard for staircases, hallways and rooms with two entrances, where you need to turn the same light on or off from either end. Each gang operates independently as a 2-way switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 16mm back box depth is needed. This shallow requirement makes the switch suitable for dry-lining installations where deeper boxes cannot be accommodated. The screwless cover plate adds 4.3mm projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame that is screwed to the back box. The cover can be removed for painting around the switch and re-clipped without disturbing the wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this 3-gang 2-way switch in polished chrome, brushed chrome, polished brass, antique brass, white and other finishes. Use the search function or filters at Niori to find other variants in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293930479883,"sku":"SF4000MBB","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/155568_5d192de1-22a9-4737-b0f9-eccf18bf065f.jpg?v=1714666415"},{"product_id":"10ax-4-gang-2-way-switch-black-nickel-screwless","title":"10AX 4 Gang 2-Way Switch - Black Nickel Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 4-gang 2-way switch controls four separate lighting circuits from two locations behind a black nickel screwless faceplate with matching metal rockers. Each gang is rated at 10AX (2,300W at 230V), handling higher loads than standard 6A lighting switches, making it suitable for circuits with multiple spotlights, fluorescent banks or high-wattage LED arrays.\u003c\/p\u003e\n\u003cp\u003eDesigned for hallways, open-plan living areas and commercial spaces where multiple lighting zones need coordinated control from opposite ends of a room, the 2-way configuration allows each gang to be switched independently from either location. The screwless cover plate clips onto a separate steel sub-frame, leaving no visible fixings on the wall once installed. The 4.3mm projection from the wall gives a low-profile finish that sits close to the surface.\u003c\/p\u003e\n\u003cp\u003eThe black nickel finish provides a dark gunmetal tone that works in industrial, contemporary and high-contrast interiors. The premium-grade steel construction includes a built-in gasket between the sub-frame and cover plate, improving moisture resistance beyond the IP20 rating. The 16mm minimum back box depth makes this switch compatible with shallow back boxes in stud walls and dry-lining applications where deeper boxes are impractical.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1191990_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1288446.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2-way switching allows each of the four gangs to be controlled from two different switch locations. This is typically used in hallways or staircases where you want to turn the same light on or off from either end. Each gang operates independently, so you can have different circuits switched from different locations within the same faceplate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 16mm minimum back box depth is needed. This shallow requirement makes the switch suitable for dry-lining, stud walls and retrofit installations where deeper metal back boxes cannot be accommodated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat load can each gang handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach gang is rated at 10AX, which equates to 2,300W at 230V. This is higher than standard 6A lighting switches and handles circuits with multiple LED downlights, spotlights or fluorescent tubes without overloading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The black nickel cover plate clips onto a separate steel sub-frame fixed to the back box. The cover can be removed for painting around the switch and re-clipped without disturbing the wiring or sub-frame.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293932019979,"sku":"SF4100BN","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/100616_4ce54a23-a382-4ddb-ba18-f02460cddb29.jpg?v=1714666427"},{"product_id":"10ax-4-gang-2-way-switch-matt-black-screwless","title":"10AX 4 Gang 2-Way Switch - Matt Black Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 4-gang 2-way switch controls up to four independent lighting circuits from a single faceplate, with each gang rated at 10A (2,300W per circuit at 230V). The 2-way configuration allows each circuit to be switched from two separate locations, making it suitable for rooms with multiple entry points or for controlling different lighting zones within a larger space.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installation, the switch fits a 16mm minimum back box depth and uses a screwless cover plate that clips onto a separate metal sub-frame. This means there are no visible screws or fixings on the wall once installed, giving a cleaner finish than traditional screw-fixed plates. The 4-gang layout works best in larger rooms where multiple lighting types need independent control — ceiling downlights, wall lights, under-cabinet task lighting, or accent lighting on separate circuits.\u003c\/p\u003e\n\u003cp\u003eThe premium-grade steel construction provides rigidity and long-term durability, with a matt black finish that minimises fingerprints and pairs well with modern, industrial and monochrome interiors. Each rocker is metal to match the faceplate, avoiding the visual disconnect of plastic rockers on metal plates. The built-in gasket behind the faceplate protects the switch mechanism from dust ingress. Rated to EN 60669-1 and IP20 for indoor use, with a 25-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e147.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3113701_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1288420.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 16mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.3mm of projection from the wall once fitted, giving a low-profile finish compared to deeper standard switches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2-way switching mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2-way switching allows each of the four gangs to be controlled from two separate switch locations. This is useful for controlling lights from both ends of a hallway, or from multiple entry points in a larger room. Each gang operates independently.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum load per gang?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach gang is rated at 10A, which supports up to 2,300W at 230V. This is sufficient for typical domestic lighting circuits including LED downlights, pendant lights, and wall lights on a single gang.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the switch and re-clipped without re-wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293932052747,"sku":"SF4100MBB","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/183412_0a127728-a996-45ac-b609-b0f1bc425330.jpg?v=1714666430"},{"product_id":"20a-1-gang-dp-switch-black-nickel-screwless","title":"20A 1 Gang DP Switch - Black Nickel Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 20A 1-gang DP switch controls fixed appliances rated up to 20A at 230V, including water heaters, electric cookers, immersion heaters and commercial kitchen equipment. The double-pole switching isolates both live and neutral when turned off, providing a safe isolator point for maintenance without needing to access the consumer unit. The switch uses a screwless black nickel cover plate that clips onto a metal sub-frame, leaving no visible fixings on the wall once fitted.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and light commercial installation, the switch fits a standard 25mm minimum back box depth and projects just 4.3mm from the wall surface once mounted. The low-profile design keeps the switch flush with the wall plane in areas where projection needs to be minimised, such as tight corridors or next to worktops. The matching black nickel rocker integrates into the faceplate finish without a visible seam between rocker and plate.\u003c\/p\u003e\n\u003cp\u003eThe black nickel finish provides a dark gunmetal-grey tone that pairs well with industrial, contemporary and monochrome interiors. Knightsbridge manufactures the faceplate from premium-grade steel rather than plated plastic, giving the switch a denser feel and resistance to scratching under normal use. The built-in gasket between the cover plate and sub-frame provides protection against dust ingress in dry indoor environments, rated at IP20. Certified to EN 60669-1 and carrying a 25-year warranty, the switch meets UK wiring regulations for fixed appliance control.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1192005_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292144.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat appliances is a 20A DP switch used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e20A double-pole switches control fixed appliances rated up to 4,600W at 230V. Common applications include water heaters, electric cookers, immersion heaters, commercial dishwashers and some air conditioning units. The double-pole function isolates both live and neutral when switched off, providing a safe local isolator for maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for installation. The screwless cover plate projects 4.3mm from the wall surface once the sub-frame is mounted and the cover is clipped on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for redecorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The black nickel cover plate clips onto a separate metal sub-frame that is screwed to the back box. The cover can be unclipped without disturbing the wiring, allowing you to paint or wallpaper around the switch and then re-clip the cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this 20A DP switch in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293940310283,"sku":"SF8341BN","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/101728_b79962a4-faad-4b0b-b52e-264e43c0e269.jpg?v=1714666548"},{"product_id":"20a-1-gang-dp-switch-matt-black-screwless","title":"20A 1 Gang DP Switch - Matt Black Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 20A 1-gang DP switch is a double pole isolator designed for fixed appliances drawing up to 20A at 230V, including immersion heaters, water heaters, and large commercial catering equipment. The switch breaks both live and neutral lines when turned off, providing full isolation for maintenance or appliance servicing. The screwless matt black faceplate clips onto a separate steel sub-frame, hiding all fixings behind the cover plate.\u003c\/p\u003e\n\u003cp\u003eIntended for residential kitchens, utility rooms, plant rooms and commercial installations where fixed appliances require dedicated isolation switches, the unit fits a standard 25mm minimum back box depth. The 87.5mm square faceplate aligns with UK standard electrical accessory sizing, allowing it to sit alongside standard sockets and switches from the same Knightsbridge Screwless Matt Black range. The matt black premium-grade steel finish provides a low-sheen surface that minimises fingerprints and reflections.\u003c\/p\u003e\n\u003cp\u003eThe switch carries EN 60669-1 certification and includes an IP20 rating for indoor dry-location use. The built-in gasket between the faceplate and the back box reduces dust ingress and improves the seal around the rocker aperture. The earth terminal on the metal sub-frame ensures the faceplate is safely earthed when installed. Knightsbridge backs this switch with a 25-year warranty, covering material and manufacturing defects under normal domestic use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3113759_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292150.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between single pole and double pole switching?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA single pole switch breaks only the live conductor. A double pole switch breaks both live and neutral, providing full electrical isolation. DP switching is required by UK Building Regulations for immersion heaters and is recommended for any fixed appliance where complete isolation is needed for safe servicing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat appliances need a 20A switch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eImmersion heaters, water heaters, commercial ovens, large extraction fans, and some air conditioning units typically require 20A isolation switches. Standard 13A switches are not rated for these loads. Check the appliance specification plate before selecting a switch rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable for decorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The matt black cover plate clips onto a steel sub-frame that's fixed to the back box. The cover can be removed for painting or wallpapering around the switch and re-clipped without disturbing the wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The 4.3mm projection of the faceplate adds minimal depth from the wall once fitted.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293940375819,"sku":"SF8341MBB","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/184212_c1a49beb-887e-4bb9-99a7-5261bdd80ec9.jpg?v=1714666552"},{"product_id":"20a-1-gang-dp-switch-neon-black-nickel-screwless","title":"20A 1 Gang DP Switch Neon - Black Nickel Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 20A 1-gang double pole switch with neon indicator features a black nickel screwless faceplate and a contrasting chrome rocker. The 20A rating handles fixed high-power appliances such as immersion heaters, electric showers and water heaters, while the double pole switching isolates both live and neutral lines when turned off.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchens, utility rooms and bathrooms (outside zones 0-2), the switch mounts in a standard 25mm minimum back box depth. The neon indicator glows red when the switch is in the on position, providing a visible status check from across the room without needing to inspect the rocker position. The screwless cover plate clips onto a separate metal sub-frame, leaving no visible fixings on the wall once installed.\u003c\/p\u003e\n\u003cp\u003eThe black nickel finish is a dark gunmetal tone that sits between brushed nickel and matt black, providing a neutral metallic accent that pairs with both warm and cool-toned interiors. The premium-grade steel construction gives the faceplate rigidity and a low 4.3mm projection from the wall. The rocker sits within a black surround that frames the chrome actuator and gives definition to the switch aperture. The built-in gasket behind the faceplate prevents paint bleed during redecoration.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1192007_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292164.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat appliances is this switch suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 20A rating makes it suitable for high-power fixed appliances such as immersion heaters, electric showers, water heaters and towel radiators. It is not intended for general lighting circuits or plug sockets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the neon indicator show?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe neon glows red when the switch is in the on position, providing a visual status check. This is useful for confirming whether an immersion heater or water heater is currently powered without needing to check the appliance itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating means the switch is suitable for dry indoor use only. In bathrooms it must be installed outside zones 0, 1 and 2 (typically 3m+ from the bath or shower enclosure). For zones 1 and 2, a switch with a higher IP rating is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this 20A DP switch with neon in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293941948683,"sku":"SF8341NBN","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/100746_9cdbf80a-d4a5-4435-b613-23b26b915c00.jpg?v=1714666560"},{"product_id":"20a-1-gang-dp-switch-with-neon-matt-black-screwless","title":"20A 1 Gang DP Switch with Neon - Matt Black Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 20A 1-gang double pole switch provides isolated control for fixed appliances rated up to 4,600W, with a red neon indicator that illuminates when the switch is in the on position. The matt black screwless faceplate sits flush to the wall surface with no visible fixings, clipping onto a separate metal sub-frame that mounts to the back box.\u003c\/p\u003e\n\u003cp\u003eDesigned for water heaters, immersion heaters, electric showers and other fixed high-draw appliances, the 20A rating handles loads beyond the 13A limit of standard switched sockets. The double pole switching isolates both live and neutral lines when the switch is off, providing full disconnection for maintenance or servicing. The neon indicator sits above the rocker and confirms operational status without needing to check the appliance itself.\u003c\/p\u003e\n\u003cp\u003eThe matt black steel faceplate measures 87.5mm square with a 4.3mm projection from the wall once fitted to a 25mm minimum back box depth. The low-sheen finish resists fingerprints and pairs cleanly with contemporary, industrial and monochrome interiors. The switch carries IP20 rating for dry indoor locations and is certified to EN 60669-1 for residential and commercial installation. A built-in gasket provides a tight seal between the faceplate and wall, improving the finished appearance and preventing dust ingress behind the plate.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e4.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePremium grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeon Indicator\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3113771_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_1292170.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat appliances is this switch suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 20A rating handles fixed appliances up to 4,600W on 230V mains, including water heaters, immersion heaters, electric showers and large extraction systems. It is not suitable for general socket outlets — use a 13A switched socket for plug-in appliances.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the neon indicator show?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe red neon indicator illuminates when the switch is in the on position, confirming that power is being supplied to the connected appliance. This allows status to be checked without accessing the appliance itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 25mm minimum back box depth is needed for safe installation. The screwless faceplate adds 4.3mm of projection from the wall once fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the screwless plate be removed for decorating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cover plate clips onto a separate metal sub-frame that mounts to the back box. The cover can be removed for painting or wallpapering around the switch and re-clipped without disturbing the wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293941981451,"sku":"SF8341NMBB","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/184214_f312de3d-2405-4d80-a874-ea8ecddb7e81.jpg?v=1714666562"},{"product_id":"sangamo-q563-24-hour-time-switch-2-on-off-operations-20a-4-pin","title":"Sangamo Q563 24-Hour Time Switch - 2 On\/Off Operations, 20A, 4-Pin","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Sangamo Q563 is a 24-hour electromechanical time switch with a quartz-driven clock dial and two independently programmable on\/off operations. The unit controls mains-powered circuits up to 20A through a 4-pin connection, switching loads on and off at set times without user intervention once programmed. A manual override button allows temporary switching outside the programmed schedule.\u003c\/p\u003e\n\u003cp\u003eDesigned for controlling heating systems, lighting circuits, water heaters, ventilation systems and pump timers in residential, commercial and light industrial installations, the Q563 operates on a repeating 24-hour cycle. The day omit dial allows specific days of the week to be excluded from the programmed schedule, so heating can run Monday to Friday but remain off at weekends without re-programming. The 100-hour battery reserve maintains the time and schedule during mains power interruptions without losing the programmed settings.\u003c\/p\u003e\n\u003cp\u003eThe clear polycarbonate front cover shows the red and white clock dial with red 24-hour time markings and numbered 1-24 around the circumference. The dial rotates once every 24 hours, driven by a quartz clock movement visible through the cover. Four brass terminals on the black base accept cable terminations for the incoming supply and outgoing switched circuit. The unit measures 104mm wide, 83mm deep and 134mm high, designed for panel mounting or DIN rail installation depending on the enclosure used.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Net Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e0.412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Gross Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e0.456\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Gross Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e0.41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Length (mm)\u003c\/td\u003e\n\u003ctd\u003e104\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Width (mm)\u003c\/td\u003e\n\u003ctd\u003e83\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Height (mm)\u003c\/td\u003e\n\u003ctd\u003e134\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Length (mm)\u003c\/td\u003e\n\u003ctd\u003e104\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Width (mm)\u003c\/td\u003e\n\u003ctd\u003e83\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Height (mm)\u003c\/td\u003e\n\u003ctd\u003e134\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_Q563.2_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_RPTS_STANDARD.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I programme the on\/off operations?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Q563 uses physical pins inserted into the rotating dial at the desired on and off times. Each pin represents one switching event. Insert pins at the hour marks where you want the circuit to switch on and remove them where you want it to switch off. The dial rotates once per 24 hours, triggering the pins as they pass the actuator.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the day omit dial do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe day omit dial allows you to exclude specific days of the week from the programmed schedule. For example, you can set heating to run Monday to Friday but skip Saturday and Sunday without removing the pins from the dial.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens if the power is interrupted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 100-hour battery reserve maintains the clock time and programmed schedule during mains power cuts. When power returns, the clock continues from the correct time without needing to be reset.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat load can it switch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Q563 is rated at 20A resistive load on 230V mains. This suits most domestic heating systems, immersion heaters, lighting circuits and ventilation fans. Inductive loads such as motors may require de-rating — consult the datasheet linked above for specific load types.\u003c\/p\u003e","brand":"Sangamo","offers":[{"title":"Default Title","offer_id":45294038712587,"sku":"Q563.2","price":233.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/Q563.2_4fffdd5d-7cea-4ba8-82d8-ab5598be052b.jpg?v=1714667543"},{"product_id":"powersaver-plus-boost-controller-black","title":"Powersaver Plus Boost Controller - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Sangamo Powersaver Plus is a boost controller that provides timed manual override of heating or hot water systems, with three preset durations: 30 minutes, 1 hour, and 2 hours. A single press of the control button activates a timed boost period, after which the system reverts to its programmed schedule. Three LED indicators on the front panel show which boost duration is active, with a green LED confirming the selected period.\u003c\/p\u003e\n\u003cp\u003eDesigned for use alongside existing heating controllers and thermostats, the boost controller allows temporary override without reprogramming a main timer. This suits households where heating or hot water is needed outside the standard schedule — early mornings, unexpected cold snaps, or guests staying over. The 16A switch rating at 240V AC handles typical domestic immersion heaters, underfloor heating zones, and hydronic heating pumps.\u003c\/p\u003e\n\u003cp\u003eThe controller mounts in a standard single-gang position, either surface-mounted using the included back box or flush-mounted into a 25mm minimum depth back box. The black front plate measures 90mm x 90mm and sits 62mm deep when surface-mounted. The control button is recessed below the faceplate to reduce accidental activation, and the LEDs are visible in daylight without being intrusive at night.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Net Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e0.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Gross Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e0.24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Gross Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e10.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Length (mm)\u003c\/td\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Width (mm)\u003c\/td\u003e\n\u003ctd\u003e62\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Height (mm)\u003c\/td\u003e\n\u003ctd\u003e92\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Length (mm)\u003c\/td\u003e\n\u003ctd\u003e285\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Width (mm)\u003c\/td\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Height (mm)\u003c\/td\u003e\n\u003ctd\u003e310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_PSPBB_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_PSPB.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the boost controller wired into the heating system?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Powersaver Plus is wired in series between the main heating controller output and the load being controlled, such as an immersion heater or heating zone valve. When a boost is activated, the controller closes the circuit for the selected duration regardless of the main timer's programme. See the installation manual for full wiring diagrams.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens when the boost period ends?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen the selected boost period (30 minutes, 1 hour, or 2 hours) expires, the controller automatically switches off and control returns to the main heating programmer. The system then follows its normal programmed schedule.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for both heating and hot water?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided the load is within the 16A rating at 240V AC. Typical applications include immersion heaters, underfloor heating zone valves, and heating circulation pumps. Multiple controllers can be installed to provide separate boost functions for heating and hot water circuits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the surface-mount box come with the controller?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. A single-gang surface-mount back box is included for surface installation. For flush mounting, a standard 25mm minimum depth single-gang back box is required and must be purchased separately.\u003c\/p\u003e","brand":"Sangamo","offers":[{"title":"Default Title","offer_id":45294132756747,"sku":"PSPBB","price":33.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/PSPBB_293977b5-879a-405e-b259-db494ff5cd21.jpg?v=1714668443"},{"product_id":"sangamo-powersaver-plus-select-7-day-digital-timer-controller-black","title":"Sangamo Powersaver Plus Select 7-Day Digital Timer Controller - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Sangamo Powersaver Plus Select is a 7-day digital timer controller with an LCD display and 16A switch rating at 240V AC. The controller offers three programming modes: 24-hour single-cycle, 5\/2-day weekday\/weekend split, and full 7-day individual programming, with up to 10 on\/off programs per day. A permanent memory reserve retains programming during power cuts, and a button lock prevents accidental setting changes.\u003c\/p\u003e\n\u003cp\u003eDesigned for controlling lighting circuits, immersion heaters, electric heating, ventilation systems and other timed loads up to 16A, the Powersaver Plus Select mounts in a single-gang position either surface-mounted (with the included back box) or flush-mounted into a standard UK back box. The LCD displays current time, day of week and active program status, with a green LED indicating when the output is switched on. A manual boost function overrides the programmed schedule for 15 minutes, 30 minutes, 1 hour, 2 hours, 4 hours or 6 hours without altering the stored program.\u003c\/p\u003e\n\u003cp\u003eThe controller's compact 90mm × 92mm × 62mm housing fits a standard single-gang aperture and the black finish suits both residential and light commercial installations. The summer\/winter time-change function adjusts the clock forward or back by one hour for daylight saving without reprogramming the schedule. All settings are accessed via three control buttons on the front face, with the button lock engaged to prevent unauthorised changes once the schedule is set.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Net Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e0.23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Gross Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e0.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Gross Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e11.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Length (mm)\u003c\/td\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Width (mm)\u003c\/td\u003e\n\u003ctd\u003e62\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Height (mm)\u003c\/td\u003e\n\u003ctd\u003e92\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Length (mm)\u003c\/td\u003e\n\u003ctd\u003e285\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Width (mm)\u003c\/td\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Height (mm)\u003c\/td\u003e\n\u003ctd\u003e310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_PSPSB_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_PSPS.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between 5\/2-day and 7-day programming?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e5\/2-day mode runs one schedule Monday to Friday and a different schedule on Saturday and Sunday. 7-day mode allows each day of the week to have its own unique schedule. Both modes support up to 10 on\/off programs per day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the timer retain settings during a power cut?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The permanent memory reserve retains all programmed schedules and the current time during power cuts. The controller resumes normal operation when power is restored.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the boost function used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe boost function manually overrides the programmed schedule to turn the load on for a set period (15 minutes to 6 hours) without changing the stored program. This is useful for one-off heating or lighting requirements outside the normal schedule.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be flush-mounted into a standard UK back box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The controller fits a standard single-gang UK back box for flush mounting, or it can be surface-mounted using the included back box. The unit dimensions are 90mm × 92mm × 62mm.\u003c\/p\u003e","brand":"Sangamo","offers":[{"title":"Default Title","offer_id":45294151074059,"sku":"PSPSB","price":51.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/PSPSB_1fc44a1d-a56f-41a4-b117-e0522097eafa.jpg?v=1714668718"},{"product_id":"10ax-1-gang-intermediate-toggle-switch-black-nickel-screwless","title":"10AX 1 Gang Intermediate Toggle Switch - Black Nickel Screwless","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 10AX 1-gang intermediate toggle switch is designed for three-way lighting control, allowing a single light or group of lights to be switched from three or more locations. The switch fits between two 2-way switches to complete a multi-point circuit, making it essential for staircases, long hallways and rooms with multiple entry points where lighting needs to be controlled from more than two positions.\u003c\/p\u003e\n\u003cp\u003eThe black nickel faceplate is made from 201 stainless steel with a screwless design that clips onto a separate mounting frame, leaving no visible fixings on the wall once installed. The ultra-flat profile projects just 22.7mm from the wall, making it suitable for narrow alcoves and tight spaces where deeper switch plates would interfere with furniture or door swings. The plate depth itself is 4.3mm, giving a low-profile finish on the wall surface.\u003c\/p\u003e\n\u003cp\u003eRated at 10AX on 230V mains, the switch handles circuits up to 2,300W, which is sufficient for domestic lighting loads including LED, halogen and incandescent circuits. The black nickel finish provides a dark metallic tone that pairs with contemporary, industrial and monochrome interiors. An integrated gasket between the faceplate and mounting frame provides additional dust resistance, though the IP20 rating means the switch is for dry indoor use only.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e87.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e38mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e22.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e15.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate Depth\u003c\/td\u003e\n\u003ctd\u003e4.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e201 Stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEarth Terminal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/datasheet-SF12TOGBN.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is an intermediate switch used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn intermediate switch allows a light to be controlled from three or more locations. It must be wired between two 2-way switches to complete the circuit. Common installations include staircases with switches at ground, mid-landing and first floor, or long hallways with switches at both ends and in the middle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe minimum mounting box depth is 16mm. The switch fits standard 25mm and 35mm single-gang back boxes with plenty of clearance for cable runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the screwless plate removable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The black nickel faceplate clips onto a separate metal mounting frame fixed to the back box. The plate can be removed for decorating and re-clipped without re-wiring the switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available in this range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnightsbridge produces this ultra-flat screwless intermediate switch in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":51391534825739,"sku":"SF12TOGBN","price":17.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/118514_7150ba76-e8d6-45fd-90e6-583af5dba6c1.jpg?v=1747069057"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/collections\/184212_c1a49beb-887e-4bb9-99a7-5261bdd80ec9.jpg?v=1789990795","url":"https:\/\/niori.co.uk\/collections\/black-light-switches.oembed","provider":"Niori","version":"1.0","type":"link"}