{"title":"Bathroom Lights","description":"\u003cp\u003eBathroom lights for the whole room, all rated IP44 and up to suit the space. The range pulls together wall and ceiling fittings, recessed downlights, bar and triple spotlights and IP65 bulkheads, with options on frosted and opal glass. Polished chrome, matt black and white finishes run across the fittings, on lamps from GU10 and G9 to integrated LED, so you can light a bathroom from one place.\u003c\/p\u003e","products":[{"product_id":"globe-bathroom-wall-light-ip44-g9-matt-black-with-frosted-glass","title":"Globe Bathroom Wall Light IP44 G9 - Matt Black with Frosted Glass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Globe is an IP44-rated bathroom wall light with a 100mm frosted glass sphere held in a matt black pressed steel frame. The fitting houses a single G9 bulb (sold separately, 25W max) behind the frosted glass, which diffuses the light output evenly across the sphere. A pull cord switch extends from the base of the wall plate, allowing the light to be operated without reaching for a separate wall switch.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms where zone 2 lighting (areas outside the immediate shower enclosure or bath surround but still subject to occasional splashing) is required, the IP44 rating provides protection against water spray from any direction. The 124mm projection from the wall and 177mm overall height suit positioning above a bathroom mirror, flanking a vanity, or as general ambient lighting in smaller bathrooms and cloakrooms. The compact footprint allows the Globe to be fitted in tighter spaces where larger wall lights would obstruct movement.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish on the pressed steel frame provides a muted contrast against white or light-toned bathroom tiles, and pairs cleanly with black tapware, shower fittings and towel rails. The frosted glass hides the bulb filament when lit, presenting as a softly glowing orb rather than a visible point source. Dimmability depends on the specific G9 bulb used — pair with a dimmable G9 LED if you want to control brightness from a compatible dimmer switch.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e177 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e124 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eFrosted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eG9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e25 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4194013_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom shower area?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP44 rating makes the Globe suitable for bathroom zone 2 (areas outside the immediate shower enclosure or bath but still subject to occasional splashing). It is not rated for use directly inside a shower enclosure or above a bath (zone 1), where IP65 or higher is typically required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes a single G9 capsule bulb up to 25W maximum. Bulbs are sold separately. Most users fit a 3-5W G9 LED in warm white (2700K-3000K) for bathroom lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the bulb. If you fit a dimmable G9 LED and connect the light to a compatible dimmer switch, the output can be controlled. Standard non-dimmable G9 bulbs will operate at full brightness only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the pull cord used?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pull cord switch extends from the base of the wall plate. Pull once to switch on, pull again to switch off. This allows the light to be operated without needing a separate wall switch, useful in bathrooms where wall switches may be inconveniently positioned.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293595558155,"sku":"BA01S1MB","price":17.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/568098_a8f085a0-ef4e-4199-989d-7844a029b337.jpg?v=1714660946"},{"product_id":"globe-3-light-bathroom-bar-spotlight-matt-black-frosted-glass","title":"Globe 3 Light Bathroom Bar Spotlight - Matt Black Frosted Glass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Globe is a 3 light bathroom bar spotlight with three frosted glass orbs mounted on individual swivel heads along a matt black pressed steel bar. Each head rotates 350° and tilts 90°, allowing light to be directed across a bathroom mirror, towards a shower area, or angled as general ambient lighting. The IP44 rating makes the fitting suitable for bathroom zones 2 and 3.\u003c\/p\u003e\n\u003cp\u003eDesigned for wall mounting above bathroom mirrors or ceiling mounting in en-suites and shower rooms, the 100mm diameter globes provide diffused light through frosted glass rather than creating bright spots. Each globe takes a G9 capsule bulb up to 25W (sold separately), and dimming capability depends on the bulb chosen — most G9 LED bulbs are dimmable when paired with a compatible LED dimmer.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish on the pressed steel bar and swivel housings suits contemporary bathrooms with black tapware, matt black showerheads, or monochrome tiling. The 187mm projection from the wall or ceiling means the fitting works in bathrooms with at least 500mm of clearance above a basin or 600mm of headroom when ceiling-mounted over a bath. The frosted glass softens the light output and hides the bulb filament or LED chip from direct view.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e187 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eFrosted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eG9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e25 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4195895_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zones is this fitting suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP44 rating makes the Globe suitable for bathroom zones 2 and 3 — areas outside the shower enclosure and at least 600mm from a bath edge. It is not rated for use inside a shower enclosure (zone 1) or directly above a bath (zone 0).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes three G9 capsule bulbs up to 25W each. Bulbs are sold separately. Most users pair this with G9 LED bulbs between 3-5W and 2700K-3000K for warm bathroom lighting. Halogen G9 bulbs are also compatible but consume more energy and run hotter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the bulbs fitted. Most G9 LED bulbs are dimmable when paired with a compatible LED dimmer switch. Check the bulb packaging before pairing with a dimmer to confirm compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the heads be angled independently?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each of the three heads rotates 350° and tilts 90° independently, allowing light to be directed across a mirror, angled towards a shower area, or aimed upwards for ambient ceiling wash.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293595623691,"sku":"BA01B3MB","price":38.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/568106_1096c42d-9998-48c3-996d-170454522a66.jpg?v=1714660948"},{"product_id":"globe-bathroom-wall-light-ip44-g9-polished-chrome-with-pull-cord","title":"Globe Bathroom Wall Light IP44 G9 - Polished Chrome with Pull Cord","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Globe is a single-bulb bathroom wall light with a 100mm frosted opal glass orb mounted on a polished chrome backplate, fitted with a pull cord on\/off switch. The IP44 rating protects the electrical components from water splashes, making it suitable for bathroom zones 2 and 3 (outside the shower enclosure and beyond 600mm from a bath or basin).\u003c\/p\u003e\n\u003cp\u003eDesigned for mirror lighting, side-of-vanity positions, or general bathroom ambient light, the frosted glass diffuses the bulb glow into a soft, even output that reduces glare on reflective surfaces. The 124mm projection from the wall positions the light source forward of typical bathroom cabinetry, while the 177mm height keeps the pull cord within reach at standing height. The polished chrome finish resists bathroom humidity and pairs with chrome taps, towel rails and shower fittings.\u003c\/p\u003e\n\u003cp\u003eThe light takes a single G9 capsule bulb up to 25W (sold separately), giving flexibility to choose LED, halogen or other G9 formats depending on the colour temperature and brightness needed. Dimmer compatibility depends on the specific bulb used — most dimmable G9 LEDs work with trailing-edge dimmers, but check the bulb packaging before pairing with a dimmer circuit. The pressed steel backplate fixes to a standard UK 25mm back box with screws concealed behind the glass orb once fitted.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e177 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e124 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eFrosted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eG9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e25 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4195952_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zones is this suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP44 rating makes this light suitable for zones 2 and 3 in UK bathroom regulations — outside the shower enclosure and beyond 600mm from a bath or basin edge. It is not rated for zone 1 (inside the shower) or zone 0 (inside the bath).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe light takes a single G9 capsule bulb up to 25W. Bulbs are sold separately. Most users pair this with a warm-white LED G9 between 3-5W and 2700K-3000K for bathroom mirror lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimmer compatibility depends on the specific G9 bulb used. Most dimmable G9 LEDs work with trailing-edge dimmers, but check the bulb packaging before connecting to a dimmer circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the glass orb cleaned?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe frosted opal glass can be wiped with a damp microfibre cloth and mild soap solution. Avoid abrasive cleaners or scouring pads, which can scratch the frosted surface. The polished chrome backplate can be wiped with a dry cloth or chrome polish.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293595885835,"sku":"BA01S1C","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/577726_00a9e337-45c8-408b-bc09-54cf31052777.jpg?v=1714660952"},{"product_id":"globe-3-light-bathroom-bar-spotlight-polished-chrome-ip44","title":"Globe 3 Light Bathroom Bar Spotlight - Polished Chrome IP44","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Globe is a 3 light bar spotlight with frosted glass orbs mounted on adjustable polished chrome arms, rated IP44 for bathroom installation. Each of the three G9 lamp holders sits inside a 100mm diameter frosted glass globe, and each head tilts 90° and rotates 350° independently, allowing light to be directed onto mirrors, into shower areas, or across wall surfaces.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms where both task lighting and ambient diffusion are needed, the Globe mounts to walls or ceilings in zones 2 and 3 (outside the immediate shower enclosure). The IP44 rating provides protection against water splashes from any direction, making it suitable for above-mirror placement, beside bathtubs, and on corridor walls leading into wet rooms. The bar measures approximately 550mm wide and projects 187mm from the wall when fitted, so clearance above basins and furniture should be checked before installation.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel construction and polished chrome finish give a reflective, clean appearance that pairs with modern chrome taps, towel rails and shower fittings. The frosted glass diffuses the light from each G9 bulb, softening glare and giving an even wash of light rather than hard spotlight beams. Each lamp position accepts a G9 halogen or LED bulb up to 25W (bulbs sold separately), and dimmer compatibility depends on the bulb chosen.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e187 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eFrosted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eG9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e25 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4196064_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP44 rating makes it suitable for bathroom zones 2 and 3, which covers most wall and ceiling positions outside the immediate shower enclosure. It should not be fitted directly inside a shower cubicle or above a bath within the 2.25m zone directly above the water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes three G9 capsule bulbs, halogen or LED, with a maximum 25W per bulb. Bulbs are not included. Most users pair this with warm-white LED G9 bulbs between 2W and 4W for bathroom lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimmer compatibility depends on the bulb type. LED G9 bulbs marked as dimmable will work with most leading-edge or trailing-edge dimmers. Non-dimmable LED bulbs and standard halogen bulbs will not dim without flicker or damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan each spotlight be adjusted independently?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each of the three heads tilts 90° vertically and rotates 350° horizontally on its own pivot, allowing different directions for mirror lighting, ceiling wash, or downward task lighting.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293596180747,"sku":"BA01B3C","price":42.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/568130_e57292df-12e3-4700-ab62-93169969fe43.jpg?v=1714660954"},{"product_id":"3-light-bathroom-spotlight-ip44-frosted-glass-matt-black","title":"3 Light Bathroom Spotlight IP44 Frosted Glass - Matt Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 3-light bathroom spotlight mounts three adjustable G9 fittings on a matt black pressed-steel ceiling plate, each with a frosted glass diffuser. The IP44 rating makes the fitting suitable for bathroom zones 2 and 3, where moisture resistance is required but direct water contact is not expected.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, shower rooms and en-suites where directed task lighting is needed over mirrors, vanity units or shower enclosures, each spotlight head tilts 90° and rotates 350° independently. This allows the three beams to be positioned where needed rather than fixed in a single direction. The 246mm diameter ceiling plate suits standard UK ceiling roses and the 122mm projection keeps the heads clear of walls when mounted near corners or alcoves.\u003c\/p\u003e\n\u003cp\u003eThe frosted glass diffusers soften the light output from each G9 bulb, reducing glare when the fittings are positioned at eye level or directed towards reflective surfaces such as bathroom mirrors and tiles. The matt black finish on the pressed-steel construction absorbs rather than reflects ambient light, keeping the fitting visually quiet against darker walls or ceilings. Each fitting takes a G9 bulb up to 25W (sold separately), with dimmer compatibility dependent on the bulb chosen.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e246 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e122 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eFrosted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eG9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e25 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4196159_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP44 mean and where can this be fitted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP44 means the fitting is protected against splashing water from any direction. This makes it suitable for bathroom zones 2 and 3 (areas outside the shower enclosure and more than 60cm from the bath edge). It should not be fitted directly inside a shower cubicle or within 60cm of a bath or basin tap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach spotlight takes a G9 capsule bulb up to 25W. Bulbs are sold separately. Most users pair this with 3-5W G9 LED bulbs in warm white (2700K-3000K) for bathroom task lighting. The fitting is compatible with both halogen and LED G9 bulbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimmer compatibility depends on the bulb chosen. If you fit dimmable G9 LED bulbs and pair them with an LED-compatible dimmer switch, the fitting can be dimmed. Standard non-dimmable G9 LEDs will not dim and may flicker or fail if used with a dimmer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the spotlight heads be adjusted after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each head tilts 90° and rotates 350° on its mounting point, allowing the light direction to be adjusted at any time without rewiring or removing the fitting. This is useful for repositioning the beams as bathroom layouts or mirror placements change.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293597131019,"sku":"BA02P3MB","price":42.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/568198_dfb164a2-a8bb-4d0f-a1b4-3f8fc28ce2af.jpg?v=1714660965"},{"product_id":"knightsbridge-ip44-single-wall-spotlight-pull-cord-matt-black","title":"Knightsbridge IP44 Single Wall Spotlight Pull Cord - Matt Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP44 single wall spotlight is a pressed steel and glass spot fitting with a matt black finish, a pull cord on\/off switch and an adjustable head that rotates 350° and tilts 90°. The fitting takes a single GU10 bulb up to 20W (sold separately) and carries an IP44 rating, making it suitable for bathroom zones 2 and 3 where moisture is present but direct water contact is unlikely.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, utility rooms, hallways and commercial washrooms, the spotlight mounts flush to the wall with a 123mm projection from surface to the front of the lamp head. The pull cord switch sits below the circular backplate, providing simple on\/off control without needing a separate wall switch. The 90° tilt allows the beam to be directed downwards for task lighting at a basin or mirror, or angled to wash light across a wall or ceiling.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish is a low-sheen powder coat over pressed steel construction, giving a modern industrial aesthetic that pairs with monochrome bathrooms, dark tile schemes and contemporary commercial interiors. The clear glass lens on the lamp head provides unobstructed light output from the GU10 bulb inside. Dimmer compatibility depends on the bulb selected — LED GU10s with dimmable drivers allow the fitting to work on a dimmer circuit.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e55 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e123 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4196760_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zones is the IP44 rating suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP44 protection is suitable for bathroom zones 2 and 3, where moisture and splashing may occur but direct water jets are not expected. This includes positions above basins, next to mirrors and general bathroom wall areas outside the shower enclosure or bath zone 1.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The fitting accepts any standard GU10 LED or halogen bulb up to 20W maximum, sold separately. Most users pair this with a 4-6W LED GU10 in 3000K warm white for bathroom task lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the light direction be adjusted after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The lamp head rotates 350° horizontally and tilts 90° vertically on a friction joint, allowing the beam to be redirected at any time without tools. The position holds once set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting itself supports dimming, but compatibility depends on the GU10 bulb you install. Choose a dimmable LED GU10 and pair it with a compatible LED dimmer switch to enable dimming control.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293597655307,"sku":"BA03S1MB","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1474606_2143d1a1-e14b-4256-b18d-5275d50c0c9d.jpg?v=1714660976"},{"product_id":"3-light-ip44-track-spotlight-bar-matt-black","title":"3 Light IP44 Track Spotlight Bar - Matt Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge 3-light track spotlight bar mounts three individually adjustable GU10 spotlight heads on a 430mm matt black pressed steel rail. Each head rotates 350° and tilts 90°, allowing light to be directed independently to specific zones in bathrooms, kitchens, hallways and commercial retail or office spaces. The IP44 rating protects against water splashes, making the fitting suitable for bathroom zones 2 and 3.\u003c\/p\u003e\n\u003cp\u003eDesigned for both ceiling and wall mounting, the spotlight bar can be fixed horizontally across a ceiling to light a bathroom mirror and vanity area, or mounted vertically on a wall to accent artwork or architectural features. The three heads accept standard GU10 bulbs up to 20W each (bulbs sold separately), giving flexibility to choose warm white for residential bathrooms or cool white for commercial kitchens and retail.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish on the pressed steel construction minimises reflections and pairs comfortably with contemporary, industrial and monochrome interiors. Each spotlight head houses a clear glass lens that protects the bulb while allowing full light output. The compact 55mm diameter heads project 125mm from the mounting surface when angled forward, providing clearance for directing light without dominating the ceiling or wall plane.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e55 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e86 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e125 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4196762_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for bathroom use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP44 rating protects against water splashes, making it suitable for bathroom zones 2 and 3. It cannot be installed in zone 0 (inside the shower enclosure) or zone 1 (directly above a bath or shower).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach of the three heads takes a standard GU10 bulb up to 20W. Bulbs are sold separately. Most users pair this with 5-7W LED GU10 bulbs in either warm white (2700K-3000K) for bathrooms or cool white (4000K) for task lighting in kitchens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the heads be adjusted after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each head rotates 350° horizontally and tilts 90° vertically, allowing light to be redirected after the fitting is mounted. The adjustment is by hand without tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb chosen. If you install dimmable LED GU10 bulbs and connect the fitting to a compatible LED dimmer switch, the light output can be controlled. Non-dimmable GU10 bulbs will operate at full brightness only.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293597720843,"sku":"BA03B3MB","price":42.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/568270_e3982e18-a791-4e92-8548-87cda189c396.jpg?v=1714660979"},{"product_id":"3-light-bathroom-spotlight-plate-ip44-matt-black-gu10","title":"3 Light Bathroom Spotlight Plate IP44 Matt Black - GU10","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge 3-light bathroom spotlight plate mounts three independently adjustable GU10 spotlight heads on a 246mm circular ceiling plate in a matt black pressed steel finish. Each head tilts up to 90° and rotates 350° on its mounting, allowing all three beams to be directed independently for task lighting over mirrors, basins and shower zones. The IP44 rating protects against splashing water, making the fitting suitable for Zone 2 and outside bathroom zones.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, en-suites and cloakrooms where directed task light is needed, the triple spotlight plate provides flexible illumination without requiring three separate ceiling cut-outs. The 122mm projection from the ceiling means the fitting works in rooms with 2.4m or higher ceilings without the heads encroaching into head height. Each head accepts a GU10 lamp up to 20W (lamps sold separately), giving a combined 60W maximum output when all three positions are fitted.\u003c\/p\u003e\n\u003cp\u003eThe matt black pressed steel construction and clear glass fronts give a functional, industrial appearance that pairs with contemporary and minimalist bathroom schemes. The smooth matt finish resists fingerprints and water marks better than polished surfaces. Each spotlight head is independently wired to the same feed, so all three can be controlled from a single switch, or dimmable GU10 lamps can be fitted to allow dimming via a compatible wall dimmer.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e246 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e122 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4196764_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom shower area?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP44 rating makes the fitting suitable for Zone 2 in bathrooms (areas within 0.6m of a bath or shower tray) and anywhere outside the defined zones. It is not rated for Zone 0 or Zone 1 (inside or directly above the shower enclosure or bath). For steam rooms or shower cubicles, a higher IP rating is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach spotlight head takes a standard GU10 lamp up to 20W maximum. Lamps are sold separately. Most users pair this with warm-white LED GU10 lamps between 4-6W and 3000K for bathroom task lighting. The fitting accepts both halogen and LED GU10 lamps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 lamp fitted. If you fit dimmable GU10 LED lamps and pair the fitting with a compatible LED dimmer switch, the light output can be dimmed. Non-dimmable lamps will not dim and may flicker or fail if connected to a dimmer circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much ceiling height does it need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting projects 122mm from the ceiling when the heads are angled downwards. In a typical 2.4m-high bathroom this leaves approximately 2.28m clearance, which is sufficient for most installations. Lower ceilings may feel cramped if the fitting is positioned in a walkway rather than above a fixed feature like a basin.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293598048523,"sku":"BA03P3MB","price":40.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/568274_cc82f21e-5832-4162-9c4a-9681eb2ebcfa.jpg?v=1714660981"},{"product_id":"knightsbridge-single-bathroom-wall-spotlight-gu10-matt-white-ip44","title":"Knightsbridge Single Bathroom Wall Spotlight GU10 - Matt White IP44","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge BA03S1MW is a single GU10 wall spotlight in matt white pressed steel and glass, rated IP44 for bathroom installation. The spotlight head rotates 350° on its circular backplate and tilts 90° from horizontal to vertical, allowing light to be directed onto mirrors, shower cubicles, or along a wall as wash lighting. A pull cord switch integrated into the backplate controls the light without requiring a separate wall switch.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathroom zones 2 and 3, the IP44 rating protects against water splashes from all directions, making this suitable above mirrors, beside basins, and in shower rooms where the fitting is at least 600mm from the shower head. The pull cord eliminates the need for a nearby wall switch, useful in bathrooms where switch positions are restricted by tiling or layout. The 123mm projection from the wall keeps the spotlight clear of mirrors and cabinets while maintaining a compact profile.\u003c\/p\u003e\n\u003cp\u003eThe matt white finish integrates cleanly with white ceramic tiles, painted plaster, and contemporary bathroom furniture. The pressed steel construction gives rigidity to the adjustable joint, preventing the head from drifting out of position once set. The spotlight accepts any GU10 halogen or LED bulb up to 20W (sold separately), with dimmer compatibility dependent on the specific bulb chosen. The glass front lens is clear, directing the full beam output from the GU10 reflector without diffusion.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e55 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e123 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4196766_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zones is this rated for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP44 rating makes this suitable for bathroom zones 2 and 3. Zone 2 is the area within 600mm of a bath or shower basin; zone 3 is beyond 600mm. This spotlight should not be installed in zone 0 (inside a bath or shower) or zone 1 (directly above a bath or shower to 2.25m height).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The fitting accepts any GU10 halogen or LED bulb up to 20W maximum. Most users pair this with a 4-6W LED GU10 in warm white (2700K-3000K) for bathroom mirror lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be dimmed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimmer compatibility depends on the GU10 bulb fitted. If you use a dimmable LED GU10 and a compatible LED dimmer switch, the light can be dimmed. Non-dimmable GU10 bulbs will not dim and may flicker or fail if connected to a dimmer circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the pull cord switch wired?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pull cord is integrated into the backplate and wired in series with the mains supply. The light is controlled by pulling the cord — no separate wall switch is needed, though it can be wired downstream of an existing switch if preferred.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293598146827,"sku":"BA03S1MW","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/568276_be0cb2d9-15d9-4a6c-8731-4daee948a97f.jpg?v=1714660983"},{"product_id":"3-light-ip44-gu10-track-spotlight-bar-matt-white","title":"3 Light IP44 GU10 Track Spotlight Bar - Matt White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge BA03B3MW is a 3-light track spotlight bar with three adjustable GU10 fittings mounted on a 500mm matt white pressed steel bar. Each spotlight head rotates 350° and tilts 90°, allowing light to be directed independently to different zones within a room. The IP44 rating protects against water splashes, making the bar suitable for bathroom zones 2 and 3, as well as kitchens and utility rooms.\u003c\/p\u003e\n\u003cp\u003eDesigned for both ceiling and wall mounting, the bar works as task lighting over bathroom mirrors, as accent lighting in hallways, or as directional lighting in kitchens where multiple work zones need independent illumination. The 500mm bar length suits spaces between 2.5m and 4m wide, with each 55mm diameter spotlight head projecting 125mm from the mounting surface when angled forward.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel construction with a smooth matt white powder-coated finish pairs with white ceilings and modern bathroom fittings without visual clutter. Each spotlight takes a standard GU10 bulb up to 20W (sold separately), giving flexibility to choose LED, halogen, or smart bulbs depending on the required brightness and colour temperature. The clear glass front on each head focuses light output without diffusion, producing a defined beam suitable for task lighting rather than ambient wash.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e55 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e86 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e125 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4196768_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zones is this IP44 rating suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP44 provides protection against water splashes from any direction, making this spotlight bar suitable for bathroom zones 2 and 3. It is not rated for zone 0 (inside baths or shower enclosures) or zone 1 (directly above baths or shower trays). In practice, it works well mounted on a bathroom ceiling above the sink or as wall-mounted task lighting beside a mirror.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the spotlight heads be adjusted after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each head rotates 350° on its base and tilts 90° from horizontal to near-vertical, allowing you to redirect light as room use changes. The adjustment joints hold their position under the weight of a standard GU10 bulb without drift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat GU10 bulbs are recommended?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting accepts any GU10 bulb up to 20W maximum. For bathroom use, a 5-7W warm white LED GU10 at 2700K-3000K provides good task lighting over a mirror without glare. For kitchens, a cooler 4000K daylight white bulb works better for food preparation zones. Bulbs are sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming capability depends on the bulb you fit. If you install dimmable GU10 LED bulbs and wire the fitting through a compatible LED dimmer switch, the fixture will dim. Standard non-dimmable LED bulbs will not respond to a dimmer and may flicker or fail if connected to one.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293598212363,"sku":"BA03B3MW","price":42.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/568282_def39266-0f46-4213-832d-64064043252f.jpg?v=1714660985"},{"product_id":"bathroom-triple-spotlight-ip44-matt-white-gu10","title":"Bathroom Triple Spotlight IP44 Matt White - GU10","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge BA03P3MW is a ceiling-mounted triple spotlight with three independently adjustable GU10 heads mounted on a 246mm circular base plate in matt white pressed steel. Each head tilts 90° and rotates 350° on its mounting, allowing light to be directed across a room, down onto surfaces, or angled to highlight specific areas.\u003c\/p\u003e\n\u003cp\u003eRated IP44, the fitting is suitable for bathroom zones 2 and 3, as well as kitchens, utility rooms, hallways and commercial spaces where moisture resistance is required. The 122mm projection from the ceiling means the fitting works in rooms with ceiling heights of 2.2m or above without the heads sitting too low into the visual field. The white finish integrates cleanly with white ceilings and pairs with both modern and traditional bathroom schemes.\u003c\/p\u003e\n\u003cp\u003eEach head takes a standard GU10 bulb up to 20W (bulbs sold separately), giving flexibility to choose LED, halogen or compatible lamp types based on brightness and colour temperature requirements. The pressed steel construction and clear glass lenses provide durability in damp environments, and the Class I electrical rating requires an earth connection during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e246 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e122 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4196769_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zones is this IP44 spotlight suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP44 provides protection against solid objects larger than 1mm and water splashes from any direction. This makes the fitting suitable for bathroom zones 2 and 3 — typically the area outside a 60cm radius from a shower head or bath edge. It is not rated for zone 1 (directly above a bath or shower cubicle) or zone 0 (inside the bath or shower tray).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach of the three heads takes a standard GU10 bulb up to 20W. Bulbs are sold separately. Most users fit 4-6W LED GU10 bulbs in warm white (2700K-3000K) for bathroom use, providing sufficient task light without glare.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming capability depends on the GU10 bulbs fitted. Dimmable LED GU10 bulbs will allow the fitting to be controlled by a compatible dimmer switch; non-dimmable bulbs will not. Check bulb packaging for dimmer compatibility before purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow adjustable are the spotlight heads?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach head tilts 90° from horizontal to near-vertical and rotates 350° on its base mounting. This allows light to be directed across the room, down onto a mirror or vanity area, or angled to wash a wall or ceiling.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293598277899,"sku":"BA03P3MW","price":40.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/568286_5197a6c4-12f0-46cf-81b4-0f1bbd3ae506.jpg?v=1714660987"},{"product_id":"knightsbridge-ip44-single-bathroom-spotlight-polished-chrome-with-pull-cord","title":"Knightsbridge IP44 Single Bathroom Spotlight - Polished Chrome with Pull Cord","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge BA03S1C is an IP44-rated single GU10 spotlight in polished chrome, designed for bathroom installation and other moisture-prone environments. The spotlight head rotates 350° and tilts 90°, allowing light to be directed onto mirrors, shower enclosures, or across the room as needed. A pull cord switch mounted on the backplate provides on\/off control without requiring a separate wall switch.\u003c\/p\u003e\n\u003cp\u003eDesigned for zones 2 and 3 in UK bathroom regulations, the IP44 rating protects against water splashes from any direction, making the fitting suitable for mounting above basins, alongside mirrors, or in areas subject to condensation. The spotlight takes a standard GU10 bulb up to 20W (sold separately), which can be halogen or LED depending on preference for light quality and running cost. Dimmer compatibility depends on the specific bulb chosen.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel housing and polished chrome finish resist corrosion in humid bathroom conditions and provide a reflective surface that pairs with chrome taps, towel rails and mirror frames. The clear glass lens at the front of the spotlight allows full light output without diffusion. At 123mm projection from the wall and 100mm height, the fitting sits compact enough for positioning above typical basin mirrors without intruding into headroom.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e55 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e123 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4196773_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom shower enclosure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP44 rating protects against water splashes from any direction, making it suitable for zones 2 and 3 in UK bathroom regulations. It is not rated for installation inside a shower enclosure itself (zone 1), but can be mounted on walls adjacent to showers or above basins where splashing occurs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb should I use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe spotlight takes a standard GU10 bulb up to 20W. Most users install a GU10 LED bulb between 4-6W and 3000K-4000K for bathroom lighting. Bulbs are sold separately. Choose a dimmable GU10 LED if you plan to fit a dimmer switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it switched on and off?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA pull cord switch is integrated into the backplate, allowing the light to be turned on and off without needing a separate wall switch. The cord hangs approximately 150mm below the fitting when installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the spotlight head be adjusted after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The head rotates 350° on the backplate and tilts 90° up or down, so you can re-aim the light towards a mirror, shower, or across the room at any time without removing the fitting from the wall.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293598474507,"sku":"BA03S1C","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/568288_848ac490-d08a-47c2-bfc2-983ca2437399.jpg?v=1714660990"},{"product_id":"3-light-ip44-bathroom-bar-spotlight-polished-chrome","title":"3 Light IP44 Bathroom Bar Spotlight - Polished Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 3-light IP44 bathroom bar spotlight mounts three individually adjustable GU10 spotlight heads on a 460mm polished chrome bar. Each head rotates 350° on its mount and tilts 90° from horizontal to vertical, allowing light to be directed to specific areas of a bathroom, kitchen or utility room. The IP44 rating protects against water splashes from any direction, making the fitting suitable for bathroom zones 2 and 3.\u003c\/p\u003e\n\u003cp\u003eDesigned for ceiling or wall mounting above bathroom mirrors, kitchen worktops and task areas where directed light is needed, the bar installs via a backplate fixed to a standard ceiling rose or wall mounting point. The three heads can be angled independently to light different zones — one aimed at a mirror, another at a shower enclosure, the third providing general ceiling wash. Each head accepts a GU10 bulb up to 20W (bulbs sold separately), giving flexibility to choose LED, halogen or other GU10-compatible lamp types.\u003c\/p\u003e\n\u003cp\u003eThe polished chrome finish on the bar and spotlight heads provides a high-gloss reflective surface that pairs with chrome taps, shower fittings and bathroom accessories. The pressed steel construction with clear glass lenses keeps the weight manageable for standard plasterboard ceilings, and the Class I earthed design ensures safe operation in wet environments when correctly installed by a qualified electrician. Dimmer compatibility depends on the specific GU10 bulb chosen — most LED GU10 bulbs are dimmable when paired with an LED-compatible dimmer.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e55 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e86 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e125 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4196774_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP44 rating makes the fitting suitable for bathroom zones 2 and 3, which covers most bathroom ceiling and wall positions except directly above a bath or inside a shower enclosure. It must be installed by a qualified electrician in accordance with BS 7671 wiring regulations for bathroom electrical installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes three GU10 bulbs up to 20W each. Bulbs are sold separately. Most users pair this with warm-white LED GU10 bulbs between 4-6W and 2700K-3000K for bathroom task lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimmer compatibility depends on the specific GU10 bulb you choose. Most LED GU10 bulbs are dimmable when paired with an LED-compatible dimmer switch. Halogen GU10 bulbs are generally dimmable with standard trailing-edge dimmers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the heads be adjusted after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each spotlight head rotates 350° on its mount and tilts 90° from horizontal to vertical, so light direction can be adjusted at any time without removing the fitting or accessing the wiring.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293598540043,"sku":"BA03B3C","price":49.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/568292_d98efd2b-f005-411a-9bab-d25a55154517.jpg?v=1714660993"},{"product_id":"ip44-3-light-bathroom-spotlight-polished-chrome","title":"IP44 3 Light Bathroom Spotlight - Polished Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP44 3-light bathroom spotlight is a ceiling-mounted triple spot fitting in polished chrome pressed steel, with three individually adjustable lamp heads on a 246mm circular base plate. Each head houses a GU10 bulb fitting (bulbs sold separately) behind a clear glass lens, and the IP44 rating allows installation in bathroom zones 2 and 3 where moisture is present but direct water spray is not expected.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, utility rooms, shower rooms and other moisture-prone areas, the fitting mounts semi-flush to the ceiling with a 122mm projection once the heads are angled. Each spot head rotates through 350° and tilts through 90°, allowing light to be directed onto mirrors, shower areas, or distributed across the room as ambient wash. The three heads can be set to different angles, making this a functional fitting for both task lighting and general illumination in compact or awkwardly-shaped bathrooms.\u003c\/p\u003e\n\u003cp\u003eThe polished chrome finish gives a high-reflective metallic surface that pairs cleanly with chrome taps, shower fittings and other bathroom hardware. The pressed steel construction keeps the weight manageable while maintaining rigidity when the heads are adjusted. Each head accepts any standard GU10 halogen or LED bulb up to 20W maximum, and dimmer compatibility depends on the bulb chosen rather than the fitting itself.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e246 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e122 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4196776_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can this be installed in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP44 rating means the fitting is protected against splashing water from any direction, making it suitable for bathroom zones 2 and 3. Zone 2 covers areas within 0.6m of a bath or shower where water spray might occasionally reach. Zone 3 is further from water sources. The fitting is not rated for zone 1 (directly above a bath or within a shower enclosure) or zone 0 (inside the bath or shower tray).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulbs does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach head takes a standard GU10 bulb up to 20W maximum. Bulbs are sold separately. Most users choose GU10 LED bulbs between 4-6W and 3000K-4000K for bathroom lighting, giving the equivalent of 35-50W halogen output with lower running costs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimmer compatibility depends on the GU10 bulb chosen. The fitting itself does not restrict dimming. If you plan to use a dimmer switch, choose GU10 LED bulbs marked as dimmable and check they are compatible with your specific dimmer model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the heads be locked in position?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe heads have friction joints that hold their position once set, but they are not lockable. Adjusting the angle requires hand pressure, so they stay where you set them during normal use but can be moved if deliberately adjusted.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293598769419,"sku":"BA03P3C","price":46.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/568294_dfe716cc-72fe-4ba7-97cd-56674f4a833d.jpg?v=1714660995"},{"product_id":"9w-cct-led-bulkhead-ceiling-wall-light-chrome-ip65","title":"9W CCT LED Bulkhead Ceiling\/Wall Light - Chrome IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge BT9ACTCH is a 9W LED bulkhead light with adjustable colour temperature (CCT), switchable between 3000K warm white, 4000K neutral white and 5700K cool daylight via a selector on the hinged gear tray. The circular fitting has a 256mm diameter chrome-effect polycarbonate bezel surrounding an opal polycarbonate diffuser, which houses an integrated SMD LED array delivering 730-810 lumens depending on the selected CCT. The fitting carries an IP65 rating, making it weatherproof for external wall and soffit mounting as well as internal ceiling and corridor use.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial, industrial and multi-occupancy residential buildings, the bulkhead suits loading bays, car parks, stairwells, external doorways, communal corridors and utility areas where IP65-rated overhead or wall-mounted lighting is required. The low-profile 74mm projection minimises head clearance impact when ceiling-mounted in passageways under 2.4m height. The hinged gear tray allows access to the wiring terminals and CCT selector without removing the entire fitting from the ceiling or wall, and the push-fit terminal block accepts solid or stranded cable without screwdrivers.\u003c\/p\u003e\n\u003cp\u003eThe chrome-effect finish is applied to polycarbonate rather than metal, keeping the fitting lightweight (under 1kg) and resistant to UV degradation and salt corrosion in coastal or high-humidity environments. The Class II double-insulated construction means no earth connection is required, simplifying installation in older buildings where earthing may not be present at every lighting point. The non-dimmable constant-current driver is rated for 50,000 hours to L70B50, which equates to approximately 11 years at 12 hours per day operation before the LED output drops to 70% of initial brightness.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e74 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome Effect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eOpal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e3000\/4000\/5700 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e730 \/ 810 \/ 780 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e900 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e118.41 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4282010_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CCT selector is accessed via the hinged LED gear tray inside the fitting. Switch between 3000K (warm white), 4000K (neutral white) and 5700K (cool daylight) using the selector switch before connecting mains power. The selection must be made before the fitting is energised and cannot be changed via an external switch once installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating means the fitting is weatherproof and dust-tight, suitable for external wall mounting, soffit mounting under canopies, and exposed outdoor locations. The polycarbonate construction resists UV degradation and salt corrosion in coastal environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bulkhead dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The constant-current driver does not support dimming. If dimming is required, consider alternative Knightsbridge bulkhead models with dimmable driver options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the expected lifespan?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LED is rated to L70B50 at 50,000 hours, meaning it will maintain at least 70% of its initial light output for 50,000 hours of operation. At 12 hours per day use, this equates to approximately 11 years before noticeable brightness degradation occurs.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293601915147,"sku":"BT9ACTCH","price":28.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/698806_e4351410-5940-419b-afd0-f9f74a19391e.jpg?v=1714661035"},{"product_id":"spektroled-evo-4-cct-dimmable-fixed-fire-rated-led-downlight-white","title":"SpektroLED Evo 4-CCT Dimmable Fixed Fire Rated LED Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SpektroLED Evo is a fixed fire-rated LED downlight with selectable wattage (5W or 7W) and four selectable colour temperatures (2700K, 3000K, 4000K, 6000K). The switches controlling both wattage and CCT are located beneath the magnetic bezel, allowing adjustment after installation without removing the fitting from the ceiling. The integrated SMD LED delivers between 580 and 870 lumens depending on the wattage and CCT combination selected.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, kitchens, hallways and living rooms, the downlight carries an IP65 rating from below (IP20 from above), making it suitable for wet zones including Zone 1 in bathrooms. The 70mm cut-out fits standard UK ceiling joists with a 45mm minimum void depth. The fire rating covers 30\/60\/90-minute solid timber, 30-minute web joist and 30-minute i-joist installations, and the fitting is IC-rated for direct contact with thermal insulation. The male-female connector system allows cables to be terminated and hidden until decoration is complete, with the downlight plugged in only after painting.\u003c\/p\u003e\n\u003cp\u003eThe white housing shown is sold without a bezel — magnetic bezels are available separately in white, matt black, chrome, polished chrome, brass and antique brass finishes, allowing the same downlight to match different interior schemes. The pressed steel construction keeps the overall recessed depth to 43mm, making it one of the slimmest fire-rated downlights available for UK ceilings. The fitting is dimmable with trailing-edge dimmers and carries a 5-year warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e43 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e580\/600\/630\/620\/780\/810\/870\/840 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1020 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e144 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6167462_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan I change the colour temperature after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The CCT selector switch is located beneath the magnetic bezel. Once the downlight is installed, you can remove the bezel magnetically, adjust the switch to select between 2700K, 3000K, 4000K or 6000K, and replace the bezel without disturbing the ceiling mounting or wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for bathroom use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The downlight carries an IP65 rating from below, making it suitable for Zone 1 in bathrooms (directly above baths and showers). The IP rating from above is IP20, so the void space above the ceiling should remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bezel finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is sold without a bezel. Magnetic bezels are available separately in white, matt black, chrome, polished chrome, brass and antique brass. The bezel choice does not affect the light output or colour temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, with trailing-edge dimmers. Check compatibility with your specific dimmer model before installation — leading-edge dimmers may cause flickering or poor dimming performance with LED drivers.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723386123,"sku":"SPKEVF","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607266_7336a57d-cfe5-4482-92d4-6d6144c059fa.jpg?v=1714663257"},{"product_id":"knightsbridge-spektroled-evo-7w-dimmable-tilt-fire-rated-downlight-4-cct-white","title":"Knightsbridge SpektroLED Evo 7W Dimmable Tilt Fire Rated Downlight - 4-CCT White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SpektroLED Evo is a fire-rated recessed downlight with selectable wattage (5W or 7W), four colour temperatures (2700K, 3000K, 4000K, 6000K) and a 90-degree tilt mechanism. The fitting uses an integrated SMD LED array behind a prismatic diffuser, delivering between 565-865 lumens depending on wattage and CCT settings. The white pressed-steel bezel measures 90mm diameter and fits a 70mm cut-out with 56mm recessed depth.\u003c\/p\u003e\n\u003cp\u003eDesigned for new-build and retrofit ceiling installation, the SpektroLED Evo carries 30\/60\/90-minute fire ratings for solid timber joists, 30-minute ratings for web and I-joists, and IC rating for direct contact with loft insulation. The IP65 rating from below makes it suitable for bathroom zones 1 and 2, while the IP20 rating from above allows standard mains wiring in the ceiling void. The 90-degree tilt allows light to be directed onto walls, artworks or feature areas rather than straight down.\u003c\/p\u003e\n\u003cp\u003eThe fitting uses a male-female connector system that separates the downlight body from the mains cable, allowing first-fix wiring to be completed and terminated before decoration, with the luminaire body plugged in and clipped into the ceiling after painting. The same connector allows the fitting to be unplugged for lamp maintenance or redecorating without re-terminating cables. The dimmable driver works with trailing-edge dimmers and the 50,000-hour L70B10 rating suggests the LED will maintain 70% of initial output for approximately 11 years of continuous use.\u003c\/p\u003e\n\u003cp\u003eThe white finish pairs with standard white ceilings in residential, hospitality and commercial settings. Knightsbridge produces the SpektroLED Evo in six finishes (white, matt black, brushed chrome, polished chrome, brass, antique brass) sold as separate SKUs. The CCT and wattage are set via switches on the back of the fitting before installation, allowing a single stock item to cover multiple lighting scenarios.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6173131_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes it suitable for bathroom zones 1 and 2 (directly above a bath or shower enclosure). The IP20 rating from above requires standard ceiling void conditions with no water ingress from the loft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFour CCT settings (2700K, 3000K, 4000K, 6000K) are selected via switches on the back of the fitting before installation. Once the fitting is clipped into the ceiling the setting cannot be changed without removing the downlight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, but only trailing-edge dimmers. Leading-edge dimmers may cause flicker or fail to dim smoothly. Check dimmer compatibility with the manufacturer before installation, particularly when multiple downlights are controlled from a single dimmer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the tilt mechanism allow?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe inner lamp holder tilts up to 90 degrees within the bezel, allowing light to be directed onto walls, artwork or feature areas rather than straight down. The tilt is adjusted by hand after the fitting is installed.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723418891,"sku":"SPKEVTW","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607336_b6d3897e-f2e3-4137-8a39-5163df27e1d6.jpg?v=1714663259"},{"product_id":"spektroled-evo-ip65-tilt-fire-rated-led-downlight-matt-black-4-cct-dimmable","title":"SpektroLED Evo IP65 Tilt Fire Rated LED Downlight - Matt Black 4-CCT Dimmable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SpektroLED Evo is a fire-rated tilt downlight with selectable wattage (5W or 7W), four colour temperatures (2700K, 3000K, 4000K, 6000K) switchable on installation, and a 90-degree tilt mechanism housed in a matt black pressed steel bezel. The IP65 rating from below makes it suitable for bathrooms, shower rooms and wet-use zones as well as standard dry ceiling installations.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and light commercial use, the downlight fits a 70mm ceiling cut-out with a 56mm recessed depth. The male-female power connector system allows first-fix wiring to be terminated and concealed during decoration, with the luminaire itself plugged in and fitted after painting is complete. The same connector lets the fitting be removed for lamp replacement or maintenance without re-wiring. The tilt mechanism provides smooth 90-degree adjustment to direct light onto artwork, worktops, or specific zones within a room.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel construction carries fire ratings of 30\/60\/90 minutes on solid timber joists, 30 minutes on web joists, and 30 minutes on i-joists. The fitting is IC-rated for direct contact with ceiling insulation and carries acoustic rating ISO 10140-2:2010, making it suitable for multi-occupancy installations where sound transmission between floors must be controlled. The selectable wattage allows output to be reduced from 7W to 5W where lower light levels or tighter energy budgets are needed.\u003c\/p\u003e\n\u003cp\u003eThe matt black finish provides a clean contrast against white or light-coloured ceilings and suits contemporary, industrial and minimalist interiors. The downlight is dimmable when paired with trailing-edge dimmers — compatibility should be checked before installation. The four colour temperatures cover warm residential lighting (2700K), hospitality and retail (3000K), office and task lighting (4000K), and clinical or high-contrast applications (6000K), all selectable from the same fitting.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174437_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this downlight dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the SpektroLED Evo is dimmable when paired with trailing-edge dimmers. Compatibility varies by dimmer model, so check with the dimmer manufacturer before installation to confirm it supports LED loads in the 5-7W range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature or wattage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSwitches on the rear of the fitting allow you to select between 2700K, 3000K, 4000K and 6000K colour temperatures, and between 5W and 7W output. These are set during installation and are not accessible once the downlight is fitted into the ceiling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 56mm void depth is needed above the ceiling. The cut-out diameter is 70mm and the visible bezel diameter once fitted is 90mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes it suitable for wet-use zones including directly above showers and baths. The IP rating from above is IP20, so it must be protected from direct water ingress in the ceiling void.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723451659,"sku":"SPKEVTMB","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607322_fd189a25-ac8e-4bb9-8d89-d1d7b8ac4b42.jpg?v=1714663261"},{"product_id":"spektroled-evo-7w-fire-rated-tilt-led-downlight-4-cct-polished-chrome","title":"SpektroLED Evo 7W Fire Rated Tilt LED Downlight 4-CCT - Polished Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SpektroLED Evo is a fire-rated recessed LED downlight with adjustable wattage (5W or 7W) and selectable colour temperature (2700K, 3000K, 4000K, 6000K) controlled by switches on the rear of the fitting. The polished chrome bezel tilts through 90 degrees to direct light onto walls, artwork or specific features within a room. The fitting is IP65 rated from the front and IP20 from above, allowing installation in bathrooms and wet-rated zones.\u003c\/p\u003e\n\u003cp\u003eDesigned for use in ceilings requiring fire certification, the SpektroLED Evo carries 30\/60\/90-minute fire ratings for solid timber joists, 30-minute ratings for web joists and I-joists, and meets acoustic rating ISO 10140-2:2010. The 70mm cut-out fits standard ceiling apertures and the 56mm recessed depth accommodates typical ceiling voids. The fitting is IC-rated for direct contact with loft insulation without overheating. First-fix and second-fix connectors allow the cable to be terminated and concealed during decoration, with the downlight plugged in afterwards.\u003c\/p\u003e\n\u003cp\u003eThe polished chrome finish provides a reflective metallic accent that pairs with both traditional and modern interiors. The pressed steel construction and prismatic diffuser distribute the SMD LED output evenly across a 60-degree beam angle. At 7W the fitting delivers between 745lm and 865lm depending on the CCT selected, giving sufficient task and general lighting for kitchens, bathrooms, hallways and living rooms with 2.4m ceiling heights. The fitting is dimmable with trailing-edge dimmers and carries a 5-year warranty.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174443_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature and wattage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo DIP switches on the rear of the fitting allow you to select between 5W and 7W output and between 2700K, 3000K, 4000K and 6000K colour temperatures. Adjust before installation or after disconnecting mains power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be installed in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from the front allows installation in bathroom zones 1 and 2 (within 2.25m of a bath or shower) provided the fitting is installed correctly with all cable entries sealed. The IP20 rating from above means the ceiling void itself must be dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the tilt mechanism smooth?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel tilts through 90 degrees on a friction joint that holds the selected angle without sagging or needing a locking screw. This allows precise aiming at walls, artwork or specific surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does this carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is rated for 30\/60\/90 minutes in solid timber joists, 30 minutes in web joists and I-joists. It also carries acoustic rating ISO 10140-2:2010 for installations requiring sound insulation between floors.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723517195,"sku":"SPKEVTPC","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607326_9c417de1-e27d-42d6-9270-1d2d23f2616b.jpg?v=1714663263"},{"product_id":"spektroled-evo-4-cct-tilt-fire-rated-led-downlight-brushed-brass-ip65","title":"SpektroLED Evo 4-CCT Tilt Fire-Rated LED Downlight - Brushed Brass IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SpektroLED Evo is a recessed LED downlight with a 90-degree tilt mechanism, selectable colour temperature between 2700K, 3000K, 4000K and 6000K, and selectable 5W or 7W output. The brushed brass bezel sits 90mm wide at the ceiling surface with a 70mm cut-out diameter, fitting into ceilings with a minimum 56mm void depth. The lamp technology is SMD LED with a prismatic diffuser, delivering between 565-865 lumens depending on the CCT and wattage selection.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential bathrooms, kitchens, hallways and living spaces, the downlight carries an IP65 rating from below (IP20 from above), making it suitable for Zone 2 bathroom installations and other wet or humid environments. The fire-rating covers 30\/60\/90-minute solid timber, 30-minute web joist and 30-minute i-joist installations, and the fitting is IC-rated for direct contact with ceiling insulation. The tilt mechanism allows the light beam to be angled up to 90 degrees from vertical, directing light onto walls, worktops or feature areas rather than straight down.\u003c\/p\u003e\n\u003cp\u003eThe fitting uses a male-female connector system that allows cables to be terminated and hidden during decoration, with the downlight body plugged in after the room is finished. This means the brushed brass bezel stays clean during plastering and painting, and the fitting can be unplugged for future maintenance or redecorating without re-wiring. The pressed steel construction and Class II double-insulated design mean no earth connection is required. Dimmable on trailing-edge dimmers (compatibility should be checked before installation).\u003c\/p\u003e\n\u003cp\u003eThe 4-CCT selector allows the installer or end user to choose between warm white (2700K), soft white (3000K), neutral white (4000K) and cool white (6000K) after installation, matching the downlight to the room's natural light or to other fittings in the property. The dual-wattage selector provides 5W for lower-output ambient lighting or 7W where brighter task lighting is needed. Complies with current energy efficiency standards and carries a 5-year manufacturer warranty.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174449_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zone is this suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating from below makes the SpektroLED Evo suitable for Zone 2 bathroom installations (areas outside the shower enclosure or bath area but within 0.6m of them). The IP20 rating from above means the ceiling void must remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA selector switch on the rear of the fitting allows you to choose between 2700K, 3000K, 4000K and 6000K before installation. Once the downlight is fitted and powered, the selected CCT remains fixed until the fitting is removed and the switch changed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat dimmer is compatible?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight is dimmable on trailing-edge (electronic) dimmers. Leading-edge (resistive\/inductive) dimmers are not recommended. Knightsbridge publishes a compatibility list on their website — check before pairing with a specific dimmer model to avoid flicker or limited dimming range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat other finishes are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SpektroLED Evo range includes white, matt black, brushed chrome, polished chrome, brushed brass and antique brass finishes. Search Niori for \"SpektroLED Evo\" to see the full range in stock.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723549963,"sku":"SPKEVTB","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607312_7656a5e2-0714-4704-8a93-97494dd7bfbe.jpg?v=1714663266"},{"product_id":"spektroled-evo-7w-tilt-fire-rated-led-downlight-4-cct-brushed-chrome-ip65","title":"SpektroLED Evo 7W Tilt Fire Rated LED Downlight 4-CCT - Brushed Chrome IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SpektroLED Evo is a fire-rated tiltable LED downlight with selectable wattage (5W or 7W) and four selectable colour temperatures (2700K, 3000K, 4000K, 6000K), set on installation via switches on the driver. The brushed chrome bezel surrounds a prismatic diffuser that tilts smoothly through 90 degrees, allowing the beam to be directed towards a focal point or angled across a ceiling slope.\u003c\/p\u003e\n\u003cp\u003eDesigned for contractors and refurbishment projects where flexibility reduces stock complexity, the downlight uses a plug-in connector system that separates first-fix wiring from second-fix installation. The mains cable is terminated at first fix and left in the ceiling void; the downlight itself plugs in after decorating is complete. This same connector allows the fitting to be removed for maintenance or redecorating without re-wiring. The IP65 front rating makes the downlight suitable for bathroom zones 1 and 2, while the fire rating covers 30\/60\/90 minute solid timber installations and 30 minute web joist and i-joist constructions.\u003c\/p\u003e\n\u003cp\u003eThe fitting requires a 70mm cut-out and 56mm minimum void depth. The pressed steel construction and IC (insulation contact) rating mean the downlight can be installed in direct contact with loft insulation without overheating. The brushed chrome finish provides a neutral metallic accent that pairs with both warm and cool bathroom palettes, and the 90mm diameter bezel sits flush with the ceiling surface. Output ranges from 565lm at 5W\/2700K to 865lm at 7W\/4000K, giving flexibility to match the light level to the room size and ceiling height. The fitting is dimmable with trailing-edge dimmers and carries a 5-year warranty.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174453_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zones is this downlight suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 front rating makes the SpektroLED Evo suitable for bathroom zones 1 and 2 (directly above a bath or shower enclosure, and within 60cm of a bath or basin). The rear of the fitting is IP20, so ensure the ceiling void is dry and not exposed to water ingress.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature and wattage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall switches on the LED driver inside the fitting allow you to select between 2700K, 3000K, 4000K and 6000K, and between 5W and 7W output. These are set once during installation, not adjusted in use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the fitting be installed in contact with loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IC (insulation contact) rating means the downlight can be covered by or installed in direct contact with loft insulation without overheating. The fire rating covers 30\/60\/90 minute solid timber installations and 30 minute web joist constructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with dimmer switches?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is dimmable with trailing-edge dimmers. Leading-edge dimmers may cause flicker or hum. Check compatibility with your specific dimmer model before installation.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723582731,"sku":"SPKEVTBC","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607314_36ab4de2-808c-41ba-846f-cec4daa35b5f.jpg?v=1714663268"},{"product_id":"spektroled-evo-7w-tilt-fire-rated-led-downlight-ip65-antique-brass","title":"SpektroLED Evo 7W Tilt Fire Rated LED Downlight IP65 - Antique Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge SpektroLED Evo is a 90mm fire-rated downlight with 90-degree tilt adjustment, selectable wattage (5W or 7W), and four selectable colour temperatures (2700K, 3000K, 4000K, 6000K). The fitting runs on 230V mains with no external driver, using loop-in loop-out connectors that allow first-fix cable termination before decoration and second-fix plug-in installation after. The antique brass bezel frames a prismatic diffuser over an SMD LED module rated to 50,000 hours L70B10.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential bathrooms, kitchens, hallways and commercial installations where fire rating, IP65 front protection and adjustable light direction are required, the downlight fits a 70mm ceiling cut-out with 56mm recessed depth. The IP65 rating from below makes it suitable for bathroom zones 1 and 2, while the IP20 rating from above means it can be installed in contact with loft insulation (IC rated). Fire-rating covers 30\/60\/90-minute solid timber joists, 30-minute web joists and 30-minute I-joists (Staircraft), plus acoustic rating to ISO 10140-2:2010.\u003c\/p\u003e\n\u003cp\u003eThe tilt mechanism allows the beam to be angled up to 90 degrees from vertical, directing light onto walls, artwork, or work surfaces rather than straight down. The male-female connector system means the downlight can be unplugged for maintenance or redecorating without re-terminating cables. The antique brass finish provides a warm metallic accent that pairs with traditional and warm contemporary interiors, contrasting with the prismatic white diffuser when lit. The fitting is dimmable on trailing-edge dimmers (compatibility should be checked before installation).\u003c\/p\u003e\n\u003cp\u003eThe selectable wattage switch on the fitting allows output to be set to 5W (565-605 lumens depending on CCT) or 7W (745-865 lumens), giving flexibility to match light levels to room size and ceiling height without changing the fitting. The four CCT options cover warm white (2700K), soft white (3000K), neutral white (4000K) and cool white (6000K), selected via switches on the fitting before installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e56 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAntique Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e565\/580\/605\/590\/745\/865\/825\/778 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e142 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174457_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bathroom zones is this downlight suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating from below makes the SpektroLED Evo suitable for bathroom zones 1 and 2 (directly above a bath or shower). The IP20 rating from above means it should not be installed where water can enter from the ceiling void.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I select the wattage and colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting has switches accessible before installation that allow you to choose between 5W and 7W output, and between 2700K, 3000K, 4000K and 6000K colour temperatures. Once the fitting is installed in the ceiling, these settings cannot be changed without removing the downlight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the downlight be installed in contact with loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The fitting is IC rated (insulation contact), meaning it can be covered by loft insulation without overheating. The fire-rating also covers installation in solid timber joists, web joists and I-joists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the antique brass bezel removable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel is fixed and cannot be changed. Other finishes in the SpektroLED Evo range include white, matt black, brushed chrome, polished chrome and brass — use the search function to find other variants in stock at Niori.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293723648267,"sku":"SPKEVTAB","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607306_d6a18823-ff87-47f1-aa90-698975f0523b.jpg?v=1714663270"},{"product_id":"spektroled-evo-dimmable-fire-rated-led-downlight-4-cct-fixed-10-pack","title":"SpektroLED Evo Dimmable Fire Rated LED Downlight 4-CCT Fixed (10 Pack)","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe SpektroLED Evo is a fire-rated LED downlight with selectable wattage (5W or 7W) and four selectable colour temperatures (2700K, 3000K, 4000K, 6000K) controlled by switches under the magnetic bezel. Each fitting houses an integrated SMD LED behind a prismatic diffuser and sits flush in a 70mm ceiling cut-out with a 90mm finished diameter. The pack contains 10 fittings, each supplied with a white bezel. Additional bezel colours are available separately, allowing finish changes without rewiring.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and commercial installation where fire rating, IP65 front protection and dimming capability are required, the SpektroLED Evo carries 30\/60\/90-minute fire ratings for solid timber joists, 30-minute ratings for web joists and i-joists, and IC rating for direct contact with loft insulation. The IP65 rating from below makes it suitable for bathrooms, wet rooms and kitchens, while the IP20 rating from above limits it to dry ceiling voids. The fitting connects directly to 230V mains using Knightsbridge's male-female connector system, which allows first-fix cabling to be terminated and hidden until decoration is complete, then plugged into the downlight at second fix.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel housing requires a 43mm minimum void depth and sits 43mm into the ceiling void once installed. The 60-degree beam angle provides general ambient light rather than narrow spotlighting. Switching between 5W and 7W allows the installer to reduce maximum light output where lower illumination is needed or increase it where brighter task lighting is required. Output ranges from 580 lumens at 5W\/2700K to 870 lumens at 7W\/4000K. The fitting is dimmable with trailing-edge dimmers (compatibility should be confirmed before installation). The L70B10 rating of 50,000 hours indicates the LED will maintain 70% of its initial output for approximately 22 years at 6 hours daily use.\u003c\/p\u003e\n\u003cp\u003eThe magnetic bezel clips onto the downlight body after installation, allowing it to be removed for access to the wattage and CCT switches without disturbing the ceiling mounting or wiring. The Class II rating means no earth connection is required. The fitting carries a 5-year warranty and complies with post-2021 energy efficiency standards (Energy Rating Class C). Acoustic rating to ISO 10140-2:2010 limits sound transmission through the ceiling void.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e43 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e43 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003ePrismatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B10\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Rating (Class) post 2021 SLR\u003c\/td\u003e\n\u003ctd\u003eC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e2700\/3000\/4000\/6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e580\/600\/630\/620\/780\/810\/870\/840 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens (Light Source only)\u003c\/td\u003e\n\u003ctd\u003e1020 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e45478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficacy\u003c\/td\u003e\n\u003ctd\u003e144 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_6174740_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes it suitable for bathroom zones 1 and 2 (outside the shower enclosure but within 60cm of a bath or shower tray). The IP20 rating from above means the ceiling void must remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the colour temperature changed after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe magnetic bezel clips off without tools, exposing two switches underneath. One switch selects wattage (5W or 7W), the other cycles through the four colour temperatures (2700K, 3000K, 4000K, 6000K). The bezel clips back on after adjustment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 43mm void depth is required. The fitting sits 43mm into the ceiling void and requires a 70mm diameter cut-out. Existing downlight apertures of 60-75mm can usually accommodate the SpektroLED Evo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel colour be changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Knightsbridge offers the SpektroLED Evo bezel in six finishes (sold separately). The magnetic bezel system allows the finish to be changed without rewiring or removing the downlight from the ceiling.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293724303627,"sku":"SPKEVFS10","price":118.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/1607290_5c29eaa6-bb38-405c-baa0-ff5a97efae5d.jpg?v=1714663286"},{"product_id":"recessed-square-led-guide-light-white-ip54","title":"Recessed Square LED Guide Light - White IP54","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge NH019W is an 80mm square recessed LED guide light with an integrated 1W 6000K SMD LED behind a clear diffuser in a matt white die-cast aluminium frame. The fitting mounts flush to external walls, internal stairwells and hallways with just 3mm projection from the wall surface once installed, providing low-level guide lighting without protruding into walkways.\u003c\/p\u003e\n\u003cp\u003eDesigned for staircases, garden pathways, deck edges and corridors where subtle wayfinding light is needed after dark, the IP54 rating protects against dust and water splashes, making it suitable for both indoor and covered outdoor installation. The 230V mains voltage LED requires no separate driver or transformer — the fitting connects directly to mains wiring behind the wall, simplifying installation and reducing the number of components needed per run.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium construction withstands outdoor exposure in UK climates, and the matt white finish blends into rendered or painted walls during daylight. The 6000K daylight colour temperature provides crisp, cool-white light that reads as functional rather than decorative, making it well-suited to contemporary exteriors, modern staircases and service areas. The recessed depth of 50mm requires sufficient wall depth or a suitable chase, with a 75mm circular cut-out needed for the mounting sleeve.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out with Sleeve\u003c\/td\u003e\n\u003ctd\u003e75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e0.2 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eDaylight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e45 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_916771_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_880780.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat wall depth is needed for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires a minimum 50mm recessed depth behind the wall surface, with a 75mm circular cut-out for the mounting sleeve. Solid brick walls or suitable cavity wall construction can accommodate this depth, but timber-framed walls may require additional boxing or chasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the IP54 rating protects against dust and water splashes, making it suitable for covered outdoor locations such as porches, recessed doorways and covered pathways. It should not be installed in fully exposed positions subject to driving rain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be dimmed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The integrated LED is non-dimmable and operates at a fixed 1W output on 230V mains. Attempting to use a dimmer switch will damage the LED driver circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow bright is 45 lumens in practice?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e45 lumens provides low-level guide lighting rather than task or ambient illumination. It's comparable to a small nightlight, sufficient to mark the edge of a step or show the direction of a pathway in darkness, but not enough to read by or light a full room.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293913735435,"sku":"NH019W","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/8410_6d6dca62-397b-4254-91c5-6882f74c7d0e.jpg?v=1714666183"},{"product_id":"recessed-round-led-guide-light-ip54-white-6000k","title":"Recessed Round LED Guide Light IP54 - White 6000K","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge NH020W is an 80mm recessed round LED guide light with an integrated 1W SMD LED producing 45 lumens at 6000K daylight colour temperature. The die-cast aluminium housing carries an IP54 rating, protecting against dust ingress and water splashing from any direction, making it suitable for both indoor and outdoor installation in walls, soffits and steps.\u003c\/p\u003e\n\u003cp\u003eDesigned for low-level guide lighting along pathways, stairways, garden walls and building perimeters, the light sits almost flush with the wall surface with only 3mm projection from the mounting plane. The 50mm recessed depth and 75mm cut-out diameter (with supplied sleeve) allow the fitting to be set into brick, block or timber-stud walls. The 230V mains LED requires no separate driver or transformer — the fitting wires directly to the mains supply via a 300mm cable tail.\u003c\/p\u003e\n\u003cp\u003eThe matt white powder-coated finish blends into rendered, painted or light-coloured masonry during daylight. The clear diffuser allows the horizontal louvres inside the fitting to be visible when lit, creating a striped wash of light down the wall surface rather than a broad flood. The Class II double-insulated construction means no earth connection is required during installation. At 6000K the light output is cool daylight white rather than warm white, giving higher contrast visibility in outdoor security and wayfinding applications.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out with Sleeve\u003c\/td\u003e\n\u003ctd\u003e75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e0.3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eSMD LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL70B50\u003c\/td\u003e\n\u003ctd\u003e50000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCCT\u003c\/td\u003e\n\u003ctd\u003e6000 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Colour\u003c\/td\u003e\n\u003ctd\u003eDaylight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e45 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_916769_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_880784.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat wall depth is needed for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires 50mm recessed depth behind the wall surface and a 75mm diameter cut-out. This suits standard 100mm brick or block walls with plaster, or timber-stud walls with at least 75mm cavity depth between studs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a separate LED driver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The SMD LED runs directly on 230V mains and the fitting is supplied with a 300mm cable tail for direct connection to the mains supply. No transformer or driver box is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP54 rating protects against dust and water splashing from any direction, making it suitable for outdoor walls, soffits, garden steps and building perimeters in sheltered and exposed positions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP54 rating allows use in bathroom zones 2 and 3 (outside the shower\/bath enclosure and more than 600mm from the edge of a bath or shower tray). It is not rated for zone 0 or zone 1 (inside or directly above the bath\/shower).\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293913866507,"sku":"NH020W","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/7877_c4ff4fe0-a63b-4d3c-a037-2da27e51405b.jpg?v=1714666185"},{"product_id":"ip65-gu10-recessed-downlight-chrome","title":"IP65 GU10 Recessed Downlight - Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP65 GU10 recessed downlight features a chrome-finished die-cast aluminium bezel with a clear glass lens protecting the lamp cavity from water ingress. The IP65 rating from below allows installation in shower zones, directly above baths, and in other wet areas where standard downlights cannot be used. The fitting accepts any GU10 halogen or LED lamp up to 35W (lamp sold separately).\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, shower rooms, wet rooms and outdoor covered areas, the downlight requires a ceiling void depth of at least 140mm and a 64mm circular cut-out in the plasterboard or ceiling material. The 84mm chrome bezel sits 6mm proud of the ceiling surface once installed, giving a defined metallic accent without significant projection. The fitting connects to 230V mains via a Class I earthed connection and is compatible with both halogen and LED GU10 lamps.\u003c\/p\u003e\n\u003cp\u003eThe chrome finish provides a reflective metallic accent that pairs cleanly with chrome taps, towel rails and shower fittings in traditional and contemporary bathrooms. The die-cast aluminium construction dissipates heat efficiently when paired with halogen lamps, while the IP65 seal around the lens keeps moisture, steam and splashed water out of the lamp cavity. Note that while the fitting is IP65 from below, it rates IP20 from above — the void space must remain dry.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e23 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e64 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1415324_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_797562.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be installed in a shower enclosure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below allows installation directly above a shower tray or bath, including within the shower enclosure itself. The glass lens and sealed bezel prevent water ingress from steam, splashing and direct spray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 140mm void depth is needed to accommodate the 90mm recessed body of the fitting plus clearance for the GU10 lamp and wiring. Measure from the finished ceiling surface to the floor joist or concrete slab above before cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The fitting accepts any GU10 halogen or LED lamp up to 35W. Most users pair this with a 5-7W GU10 LED in warm white (2700K-3000K) for bathroom lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the lamp you install. GU10 LED lamps marked as dimmable will work with compatible trailing-edge dimmers. Non-dimmable LEDs and most halogen GU10s are not designed for dimming circuits.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293919731979,"sku":"RDSHC","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/113038_c752367f-0a98-40de-b1c2-e5ede10bed01.jpg?v=1714666287"},{"product_id":"ip65-gu10-recessed-downlight-brushed-chrome","title":"IP65 GU10 Recessed Downlight - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP65 GU10 recessed downlight is a die-cast aluminium fitting with a brushed chrome faceplate designed for wet-rated installation in bathrooms, shower rooms and outdoor covered areas. The IP65 rating protects against water jets from any direction when viewed from below, while the ceiling void side carries IP20 rating requiring dry installation conditions above the fitting.\u003c\/p\u003e\n\u003cp\u003eThe 64mm cutout diameter and 90mm recess depth suit standard ceiling constructions with a minimum 140mm void depth between the ceiling surface and the structure above. The fitting takes any GU10 bulb up to 35W (sold separately), providing compatibility with halogen or LED GU10 lamps depending on the light output and colour temperature required. Dimming capability depends on the bulb selected — most LED GU10s now support dimmer operation if paired with a compatible trailing-edge dimmer.\u003c\/p\u003e\n\u003cp\u003eThe brushed chrome finish provides a neutral metallic accent that pairs with both warm and cool bathroom colour schemes without dominating the ceiling plane. The 84mm visible diameter sits flush with the ceiling once installed, with a 6mm projection from the ceiling surface. The die-cast aluminium construction provides heat dissipation for higher-wattage halogen bulbs, though most installations now use 4-6W LED GU10 lamps which generate minimal heat and last significantly longer than halogen equivalents.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e23 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e64 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1416258_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_797564.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a shower cubicle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating protects against direct water jets when viewed from below, making it suitable for shower cubicles and wet zones in bathrooms. The ceiling void above must remain dry (IP20 from above), so ensure the ceiling construction prevents moisture ingress into the void space.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb should I use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes any GU10 bulb up to 35W (sold separately). Most users now choose LED GU10 lamps between 4-6W and 2700K-4000K colour temperature. LED bulbs provide equivalent light output to 35-50W halogen while consuming less power and lasting significantly longer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 140mm void depth is required between the ceiling surface and the structure above. The fitting itself recesses 90mm into this void, with the remaining clearance needed for the GU10 bulb and wiring connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb you install. Most modern LED GU10 bulbs are dimmable if paired with a compatible trailing-edge dimmer. Check the bulb packaging for dimmer compatibility before purchasing.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293920583947,"sku":"RDSHCBR","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/113040_7276fa9b-5cc3-4d9c-95ec-6c887e63d6db.jpg?v=1714666289"},{"product_id":"ip65-gu10-recessed-downlight-white","title":"IP65 GU10 Recessed Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP65 GU10 recessed downlight is a white die-cast aluminium fitting rated for use in bathrooms, shower rooms and other wet areas where spray or condensation is present. The IP65 rating applies to the front face of the fitting (protection against water jets from any direction), while the top side holds an IP20 rating for installation within ceiling voids.\u003c\/p\u003e\n\u003cp\u003eDesigned for recessed ceiling installation with a 64mm cut-out diameter and a minimum void depth of 140mm above the ceiling surface, the downlight accepts any standard GU10 halogen or LED bulb up to 35W (bulb sold separately). The 6mm projection from the ceiling keeps the fitting low-profile, while the white finish blends into white or light-toned ceilings. The die-cast aluminium body provides structural integrity and heat dissipation for halogen bulbs, while remaining cool enough for LED operation.\u003c\/p\u003e\n\u003cp\u003eThe Class I earthed construction requires connection to a protective earth terminal during installation, following BS 7671 wiring regulations for bathroom zones. Dimmer compatibility depends on the bulb installed — halogen GU10s dim on standard trailing-edge dimmers, while LED GU10s require LED-compatible dimmers matched to the specific bulb model. The 84mm external diameter and 23mm height give the fitting a compact profile that suits standard ceiling joists at 400mm centres.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e23 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e64 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1416257_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_797566.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom shower area?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating protects against water jets from any direction, making it suitable for installation in bathroom zones 1 and 2 (inside and adjacent to shower enclosures). The fitting must be installed by a qualified electrician following BS 7671 bathroom zone regulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum void depth of 140mm above the ceiling surface is required to accommodate the 90mm recessed depth of the fitting and allow clearance for the GU10 bulb and heat dissipation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimmer compatibility depends on the GU10 bulb installed. Halogen GU10s typically work with standard trailing-edge dimmers, while LED GU10s require LED-compatible dimmers matched to the specific bulb model. Check the bulb manufacturer's dimmer compatibility list before pairing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb should I use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting accepts any standard GU10 bulb (halogen or LED) up to 35W. Most users pair this with a 4-7W LED GU10 in 3000K-4000K for bathroom lighting, which provides 300-600 lumens of directional light while remaining cool to touch.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293921009931,"sku":"RDSHW","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/113042_6b972b8f-f763-4c5c-b608-1bb067d6087c.jpg?v=1714666291"},{"product_id":"ip65-fire-rated-gu10-downlight-brushed-chrome-fixed","title":"IP65 Fire-Rated GU10 Downlight - Brushed Chrome Fixed","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP65 fire-rated GU10 downlight combines sealed moisture protection with structural fire-rating in an 84mm diameter pressed steel housing finished in brushed chrome. The IP65 rating from below protects against water jets and dust ingress, making this downlight suitable for bathrooms, shower rooms and covered outdoor soffits, while the 30\/60\/90-minute fire rating on solid timber joists prevents flame and smoke spread through ceiling voids.\u003c\/p\u003e\n\u003cp\u003eDesigned for new-build and retrofit installation, the downlight uses a fast-fix spring clip system that grips the ceiling aperture without screws, and push-fit terminal blocks allow loop-in\/loop-out wiring without a screwdriver. The 69mm cut-out diameter suits standard holesaw sizes and the 167mm minimum void depth accommodates most UK residential joist spacings. The fixed bezel directs light straight down, making this downlight suitable for general bathroom lighting, hallway runs and kitchen perimeter zones where adjustable spots are not needed.\u003c\/p\u003e\n\u003cp\u003eThe brushed chrome bezel finish provides a neutral metallic accent that pairs with chrome taps, towel rails and cabinet hardware in bathrooms, or with stainless steel appliances in kitchens. The downlight accepts any GU10 halogen or LED lamp up to 35W (sold separately), with dimming performance dependent on the lamp model chosen. The IC rating when paired with a maximum 6W LED lamp allows the fitting to be covered with loft insulation without overheating, reducing thermal bridging in ceiling voids.\u003c\/p\u003e\n\u003cp\u003eFire-rating performance varies by joist construction: 30\/60\/90 minutes on solid timber joists, 30 minutes on web-joists and 30 minutes on I-joists (Staircraft). The IP20 rating from above means the fitting is not sealed against dust or moisture penetration from the ceiling void side, so condensation-prone loft spaces may require additional vapour barrier measures during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e117 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e167 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e69 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3699122_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_329672.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this downlight be used in bathrooms and shower rooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below protects against water jets, making this downlight suitable for Zone 1 and Zone 2 bathroom installation according to BS 7671 wiring regulations. The sealed bezel prevents moisture entering the lamp holder during showering or bathing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire-rating does it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFire-rating varies by joist construction. On solid timber joists the downlight provides 30\/60\/90-minute fire integrity, preventing flame and smoke spread through the ceiling void. On web-joists and I-joists (Staircraft) the rating is 30 minutes. These ratings apply when the downlight is correctly installed according to the manufacturer's instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a GU10 bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. GU10 lamps are sold separately. The downlight accepts any standard GU10 halogen or LED lamp up to 35W maximum. Most users pair this with a 4-6W LED GU10 in warm white (2700K-3000K) for bathroom or hallway lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be covered with loft insulation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, but only when fitted with a maximum 6W LED lamp. At this wattage the downlight carries an IC (Insulation Contact) rating, meaning it can be covered with loft insulation without overheating. Using higher-wattage lamps requires a 200mm clearance around the fitting to prevent thermal build-up.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294020788491,"sku":"VFCFIPBC","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/663620_d5c959e1-e85f-4ce3-a671-fcf5b404c1a6.jpg?v=1714667359"},{"product_id":"ip65-fire-rated-gu10-downlight-chrome-fixed","title":"IP65 Fire-Rated GU10 Downlight - Chrome Fixed","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge VFCFIPC is a fixed GU10 downlight with IP65 front protection and fire-rated construction to 30\/60\/90 minutes in solid timber joists, 30 minutes in web-joists and I-joists. The chrome bezel sits 5mm proud of the ceiling surface around a 69mm diameter cut-out, and the pressed steel housing recesses 117mm into the ceiling void with a total minimum void requirement of 167mm.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathroom zones 1 and 2, wet-room ceilings, kitchens prone to steam, and commercial spaces requiring IP65 ingress protection, the downlight uses push-fit terminals for fast installation and supports loop-in\/loop-out wiring. The GU10 lamp holder accepts both LED and halogen bulbs up to 35W (sold separately), with dimming dependent on the bulb type chosen. When fitted with a maximum 6W LED lamp, the fitting is IC-rated for direct contact with insulation.\u003c\/p\u003e\n\u003cp\u003eThe chrome finish is a bright reflective electroplate that pairs with chrome taps, towel rails and accessories in bathrooms, or with brushed and polished chrome kitchen hardware. The 84mm diameter bezel is small enough to fit typical bathroom ceiling grids without crowding adjacent fittings. The fire-rated intumescent seal expands under heat to maintain the ceiling's fire resistance rating where the downlight penetrates it.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e117 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e167 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e69 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3699846_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_329670.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating allows installation in bathroom zones 1 and 2, including directly above a bath or shower enclosure. The IP65 protection is from the front (ceiling side) only — the top of the fitting in the void is IP20.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is fire-rated to 30\/60\/90 minutes in solid timber joists, 30 minutes in web-joists, and 30 minutes in I-joists (Staircraft). The intumescent seal expands under heat to maintain the ceiling's fire resistance where the downlight penetrates it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 167mm void is required to accommodate the 117mm recessed depth of the housing plus clearance above. Measure from the finished ceiling surface to the underside of the floor or roof structure above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb fitted. Dimmable LED GU10 bulbs will dim when paired with a compatible LED dimmer. Non-dimmable bulbs will not respond to a dimmer and may flicker or fail.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294020854027,"sku":"VFCFIPC","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/331830_741edb3f-423b-4f95-95d9-9f375f6ccc00.jpg?v=1714667361"},{"product_id":"ip65-fire-rated-fixed-gu10-downlight-white","title":"IP65 Fire-Rated Fixed GU10 Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP65 fire-rated fixed GU10 downlight combines bathroom-grade water resistance with 30\/60\/90-minute fire protection behind a white pressed-steel bezel. The IP65 rating seals the fitting from below against water jets and dust ingress, making it compliant for use in bathroom zones 1 and 2, while the fire rating meets Building Regulations for ceiling penetrations in solid timber, web-joist and I-joist constructions.\u003c\/p\u003e\n\u003cp\u003eDesigned for new builds and retrofit installation, the downlight requires a 69mm cut-out diameter and a minimum ceiling void depth of 167mm to accommodate the rear housing and fire hood. Push-fit terminals accept loop-in\/loop-out wiring without requiring a screwdriver, speeding installation across multiple fittings. The unit accepts any GU10 halogen or LED bulb up to 35W (sold separately), with dimming capability dependent on the bulb specification rather than the fitting.\u003c\/p\u003e\n\u003cp\u003eThe white finish on the 84mm diameter bezel sits flush with the ceiling surface, projecting only 5mm below the plasterboard or render line once installed. The pressed-steel construction handles the heat dissipation from higher-wattage halogen bulbs, though the fitting also carries IC insulation-contact rating when paired with LED bulbs up to 6W, allowing loft insulation to be packed around the housing without creating a fire risk. Fire certification covers 30-minute protection in web-joist and Staircraft I-joist installations, and extends to 60 and 90 minutes in solid timber ceilings depending on joist depth and specification.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e117 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e167 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e69 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3707042_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_329668.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes the fitting compliant for bathroom zones 1 and 2, including directly above a bath or inside a shower enclosure where water jets are present. The IP20 rating from above means the top of the fitting in the ceiling void is not protected against water ingress, so avoid installation directly below an unlined loft tank or leak-prone area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum void depth of 167mm is needed to accommodate the rear housing and fire hood. The recessed depth of the fitting body itself is 117mm, with the additional 50mm required for the fire protection hood that sits above the housing in the void.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a GU10 bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the bulb is sold separately. The fitting accepts any GU10 halogen or LED bulb up to 35W. Most installations use a 5-7W LED GU10 in warm white (2700K-3000K) for general bathroom or kitchen lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb you fit, not the downlight housing. If you pair the fitting with a dimmable GU10 LED and a compatible dimmer switch, the installation will dim. Non-dimmable bulbs will not respond to a dimmer even if the fitting itself is capable of handling the load.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294021017867,"sku":"VFCFIPW","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/663630_4e9f1cc4-2850-4c06-9b57-115510965ea3.jpg?v=1714667364"},{"product_id":"fire-rated-ip65-gu10-shower-downlight-brass","title":"Fire-Rated IP65 GU10 Shower Downlight - Brass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge fire-rated IP65 shower downlight is a GU10 recessed fitting with a brass bezel, built for wet zones and fire compartment ceilings. The IP65 rating on the front face allows installation in bathroom zones 1 and 2 where direct water spray is present, while the IP20 rating from above permits insulation to rest directly against the fitting's back box without overheating risk.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential bathrooms, shower rooms and wet zones in commercial settings, the fitting meets Building Regulations Part B and is tested to BS476 Parts 21 and 23 for fire integrity. It achieves 30-minute fire resistance in web-joist and I-joist ceilings, 60-minute in solid timber, and 90-minute in standard solid timber constructions. The 70mm cut-out diameter suits standard ceiling joist spacing and the 118mm recessed depth fits typical void depths above plasterboard ceilings.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium and pressed steel construction gives the fitting structural rigidity for repeated lamp changes. A twist-and-lock front ring secures the GU10 bulb in place and the brass finish provides a warm metallic accent that pairs with brass taps, towel rails and traditional bathroom fittings. Electrical termination is via a 10A connector block within a secure enclosure with cord grip, and spring clips fix the unit to the ceiling with a recommended maximum plasterboard thickness of 30mm. The fitting accepts GU10 halogen, LED or CFL bulbs up to 35W (sold separately), with dimmability depending on the bulb chosen.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e118 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306127_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800424.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a bathroom shower cubicle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 front face rating permits installation in bathroom zones 1 and 2 where direct water spray is present, making it suitable for fitting directly above or adjacent to a shower head.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is tested to BS476 Parts 21 and 23 and meets Building Regulations Part B. It achieves 30-minute fire resistance in web-joist and I-joist ceilings, 60-minute in solid timber, and 90-minute in standard solid timber constructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan insulation touch the back of the fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The fitting is insulation-compatible with an IP20 rating from above, meaning loft insulation can rest directly against the back box without causing overheating or voiding the fire rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 bulb you fit. Pair with a dimmable GU10 LED and a compatible dimmer switch to achieve dimming. The fitting itself does not restrict dimmer compatibility.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294023672075,"sku":"VFRSHGICB","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/101046_30c647c5-cce5-4194-86b5-aa35de4580d1.jpg?v=1714667394"},{"product_id":"fire-rated-ip65-shower-downlight-gu10-chrome","title":"Fire-Rated IP65 Shower Downlight GU10 - Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge VFRSHGICC is a fire-rated IP65 shower downlight with a chrome bezel, pressed steel housing and a GU10 lamp fitting. The IP65 rating from below makes it suitable for bathroom zones 1 and 2, while the fire-rated construction provides 30\/60\/90 minute protection in solid timber ceilings, 30 minutes in web-joist construction and 30 minutes in I-joist installations.\u003c\/p\u003e\n\u003cp\u003eDesigned for bathrooms, shower rooms and wet-room ceilings where both moisture protection and fire safety are required by Building Regulations, the downlight fits a 70mm ceiling cut-out and requires 118mm recessed depth above the ceiling line. The twist-and-lock front ring secures the GU10 lamp without tools and the spring clip fixings accommodate ceiling thicknesses up to 30mm. The insulation-compatible housing allows loft insulation to be laid directly over the fitting without creating a clearance gap.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel and aluminium housing with integrated intumescent padding meets BS476 Part 21 and 23 fire safety standards and complies with Building Regulations Part B. Electrical termination is via a 10A connector block inside a secure enclosure with cord grip, requiring earth connection (Class I). The chrome bezel projects 7mm below the ceiling surface once installed and accepts any GU10 halogen, LED or CFL lamp up to 35W. Dimmability depends on the lamp chosen.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e118 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306137_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800434.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in a shower cubicle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating from below makes it suitable for bathroom zone 1 (directly above a bath or shower) and zone 2 (within 600mm of a bath or shower). The rating from above is IP20, so the ceiling void must remain dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires 118mm recessed depth above the ceiling line and a 70mm cut-out diameter. The spring clips accommodate ceiling thicknesses up to 30mm. Check your ceiling void depth before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a GU10 lamp?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The lamp is sold separately. The fitting accepts any GU10 halogen, LED or CFL lamp up to 35W. Most installations now use GU10 LED lamps between 4-7W for lower running costs and heat output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 lamp you choose. If you install a dimmable GU10 LED, the fitting will dim when paired with a compatible LED dimmer switch. Non-dimmable GU10 lamps will not dim regardless of the switch.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294023704843,"sku":"VFRSHGICC","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/101044_f58dc8a0-2b2d-448b-af2c-a28d459ffcb7.jpg?v=1714667396"},{"product_id":"fire-rated-shower-downlight-ip65-gu10-brushed-chrome","title":"Fire-Rated Shower Downlight IP65 GU10 - Brushed Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge fire-rated shower downlight is a fixed GU10 recessed fitting rated IP65 from below and IP20 from above, with a die-cast pressed steel and aluminium body and a brushed chrome front bezel. The fitting is fire-rated to 30\/60\/90 minutes in solid timber joists, 30 minutes in web-joists and 30 minutes in I-joists (Staircraft), tested to BS476 Part 21 \u0026amp; 23 and compliant with Building Regulations Part B (Fire Safety).\u003c\/p\u003e\n\u003cp\u003eDesigned for bathroom zones 1 and 2, shower enclosures, wet rooms and outdoor soffits where water ingress and fire containment are both required, the fitting requires a 70mm cut-out hole and projects 7mm below the ceiling line when installed. The recessed depth of 118mm fits between standard 150mm joist centres and the fitting is insulation compatible, meaning loft insulation can be laid directly over the housing without causing overheating or voiding the fire rating.\u003c\/p\u003e\n\u003cp\u003eThe GU10 lamp holder accepts halogen, LED or CFL GU10 bulbs up to 35W (sold separately) and the fitting is dimmable depending on the bulb used. Electrical connection is via a 10A connector block inside a secure enclosure with a cord grip for strain relief. The brushed chrome bezel uses a twist-and-lock ring to hold the lamp in place and provides a low-sheen metallic finish that pairs well with chrome taps, shower fittings and bathroom accessories. Spring clips secure the fitting into the ceiling void and are rated for ceiling thicknesses up to 30mm.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e118 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrushed Chrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306140_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800436.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP65 mean and which bathroom zones is this suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 means the fitting is protected against water jets from any direction. This makes it suitable for bathroom zones 1 and 2, including directly above a bath or inside a shower enclosure. From above (in the ceiling void) the fitting is rated IP20, so it should not be installed where the ceiling void itself is exposed to water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does fire-rated mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFire-rated downlights contain an intumescent pad that expands when exposed to heat, sealing the cut-out hole to prevent fire spreading from the room below into the ceiling void. This fitting is rated to 30\/60\/90 minutes in solid timber joists, 30 minutes in web-joists and 30 minutes in I-joists, and is compliant with Building Regulations Part B (Fire Safety).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The fitting accepts any standard GU10 halogen, LED or CFL bulb up to 35W. Most users pair it with a 5-7W GU10 LED in warm white (2700K-3000K) for bathroom lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting itself is dimmable, but dimmer compatibility depends on the GU10 bulb you fit. Use a dimmable GU10 LED or halogen bulb and pair it with a compatible trailing-edge dimmer.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294023934219,"sku":"VFRSHGICCBR","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/101042_77059b8d-f4f8-4592-b09c-9ed07936783f.jpg?v=1714667399"},{"product_id":"ip65-fire-rated-shower-downlight-gu10-white","title":"IP65 Fire-Rated Shower Downlight GU10 - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge IP65 fire-rated shower downlight is a die-cast recessed fitting designed for wet zones in bathrooms, shower rooms and utility areas. The GU10 socket accepts halogen, LED or CFL bulbs up to 35W (sold separately), and the IP65 front bezel protects against water jets from any direction. The fitting carries 30\/60\/90-minute fire ratings for solid timber construction, 30-minute for web-joist and I-joist installations, tested to BS476 Part 21 \u0026amp; 23 and compliant with Building Regulations Part B.\u003c\/p\u003e\n\u003cp\u003eInstallation requires a 70mm ceiling cut-out and 118mm recessed depth above the ceiling line. The fitting is insulation compatible, allowing loft insulation to be laid over the housing without creating a fire risk or overheating the lamp. Spring clips hold the housing in the ceiling with a maximum recommended ceiling thickness of 30mm. The front bezel uses a twist-and-lock ring to secure the lamp, which allows bulb changes without removing the bezel or disturbing the ceiling cut-out.\u003c\/p\u003e\n\u003cp\u003eThe pressed steel and aluminium construction provides structural integrity for fire-rated performance while keeping the fitting light enough for plasterboard installation. The white powder-coat finish on the bezel sits flush with ceilings and matches standard white emulsion tones. Electrical connection is made via a 10A connector block inside the housing with a cord grip for cable strain relief. The fitting is Class I and must be earthed. Dimming capability depends on the bulb chosen — most GU10 LED bulbs are dimmable when paired with a compatible LED dimmer.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e87 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e92 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e118 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (IP20 from above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306187_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800432.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in bathroom shower zones?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating means the front bezel is protected against water jets, making it suitable for Zone 1 and Zone 2 in bathrooms (directly above a shower or bath). The IP20 rating from above means the housing is not protected against water ingress from the loft side, so it should not be installed where water can reach the top of the housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling depth is needed for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting requires 118mm of recessed depth above the ceiling and a 70mm diameter cut-out through the ceiling material. The spring clips are designed for ceiling thicknesses up to 30mm, which covers standard plasterboard on timber joists.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming capability depends on the GU10 bulb installed. Most GU10 LED bulbs are dimmable when paired with a compatible LED dimmer switch. Halogen GU10 bulbs are dimmable with standard resistive or trailing-edge dimmers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a bulb?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. GU10 bulbs are sold separately. The fitting accepts GU10 halogen, LED or CFL bulbs up to 35W. For bathroom use, a warm-white LED GU10 between 4-6W and 2700K-3000K is typical.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294024491275,"sku":"VFRSHGICW","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/101040_dd7a4c38-7b50-48f3-8b6b-1b653bfc5757.jpg?v=1714667401"},{"product_id":"ip65-fixed-gu10-wall-light-black-powder-coated-aluminium","title":"IP65 Fixed GU10 Wall Light - Black Powder Coated Aluminium","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge WALL1LBK is a fixed GU10 wall light built from die-cast aluminium with a black powder-coated finish and an IP65 rating for full weatherproofing. The cylindrical head houses a single GU10 bulb (sold separately) behind a clear lens, directing light in a fixed downward beam onto pathways, doorways, or facade features.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor wall mounting on residential and commercial buildings, the fitting provides functional illumination for entrances, garage doors, patio areas and external stairways. The IP65 rating protects against dust ingress and water jets from any direction, making the fitting suitable for fully exposed positions. The 94mm projection from the wall keeps the light head clear of most cladding profiles and gives adequate clearance for air circulation around the GU10 lamp.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium construction provides structural rigidity and corrosion resistance over powder-coated pressed steel alternatives. The black powder coat is applied electrostatically and heat-cured, giving a hard-wearing finish that resists flaking and UV degradation. The fitting accepts any standard GU10 halogen or LED bulb up to 35W, with dimming capability dependent on the specific bulb chosen.\u003c\/p\u003e\n\u003cp\u003eThe Class I electrical rating requires an earth connection during installation. The circular backplate measures 64mm in diameter and fixes to standard UK back boxes or directly to masonry with appropriate fixings. The clear lens does not diffuse the beam, so lamp choice determines the light quality — a warm-white LED GU10 provides softer ambient lighting, while a cool-white high-lumen LED gives sharper task illumination.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e64 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e112 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e94 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_714813_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP65 mean for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 means the fitting is fully dust-tight and protected against water jets from any direction. This makes it suitable for fully exposed outdoor positions including coastal areas, though regular cleaning is recommended in high-salt environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb should I use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes any GU10 bulb up to 35W. Most users pair this with a 5-7W LED GU10 in warm white (2700K-3000K) for pathway and entrance lighting. The clear lens does not diffuse the beam, so choose a bulb with a suitable beam angle for your application — 60° for wider coverage, 38° for more focused light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the beam direction adjustable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, this is a fixed downward-facing fitting. The beam cannot be tilted or rotated once installed. For adjustable beam direction, see the Knightsbridge WALL1ABK model in the same range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be installed on brick or masonry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 64mm circular backplate can be fixed directly to masonry using appropriate wall plugs and screws, or mounted to a standard UK back box. The Class I electrical rating requires an earth connection during installation.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294025244939,"sku":"WALL1LBK","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/8231_456a4125-902f-4bab-97e0-7a3be29210fa.jpg?v=1714667410"},{"product_id":"duceri-3w-led-ip65-emergency-bulkhead-maintained-hinged","title":"Duceri 3W LED IP65 Emergency Bulkhead - Maintained - Hinged","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Duceri is a 3W LED emergency bulkhead with IP65 rating and maintained operation, meaning the LEDs run continuously on mains power and switch to battery backup during power cuts. The fitting houses 12 surface-mount LEDs behind a hinged polycarbonate diffuser, providing 5500K daylight-spectrum light suitable for exit routes, stairwells, communal areas and industrial zones requiring emergency lighting.\u003c\/p\u003e\n\u003cp\u003eDesigned for surface mounting on walls and ceilings in commercial and industrial buildings, the bulkhead measures 200 x 90mm with a 45mm profile and weighs 600g. The hinged cover allows access to the internal battery and terminal block for testing and maintenance without removing the base from the wall. The IP65 rating protects against dust ingress and low-pressure water jets, making the fitting suitable for outdoor use under canopies, car parks, loading bays and washdown areas.\u003c\/p\u003e\n\u003cp\u003eMaintained operation means the LEDs illuminate continuously when connected to mains power, acting as standard area lighting as well as emergency lighting. During a power failure, the internal battery takes over automatically, continuing to power the LEDs for the duration of the battery charge. The polycarbonate diffuser and white polycarbonate base are impact-resistant and rated for use in high-traffic areas where accidental contact with the fitting is likely.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate Housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eCeiling or Wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Voltage\u003c\/td\u003e\n\u003ctd\u003e220 - 240V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e3W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Temperature\u003c\/td\u003e\n\u003ctd\u003e5500K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMains Luminous Flux\u003c\/td\u003e\n\u003ctd\u003e151Lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEmergency Luminous Flux\u003c\/td\u003e\n\u003ctd\u003e107Lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Duration\u003c\/td\u003e\n\u003ctd\u003e3 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e225 x 105 x 50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Net Weight\u003c\/td\u003e\n\u003ctd\u003e0.60KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Gross Weight\u003c\/td\u003e\n\u003ctd\u003e0.70KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_EMLED3WMHBULK2_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_EMLED3WMHBULK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 'maintained' mean for emergency lighting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMaintained operation means the LEDs run continuously on mains power as standard lighting and automatically switch to battery backup during power failures. This differs from non-maintained, where the LEDs only light during power cuts. Maintained fittings are required in public areas where constant illumination is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does the battery last during a power cut?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBattery duration depends on the installed battery capacity. Refer to the specification sheet in the Downloads tab for the exact emergency duration rating for this model. Typical 3W emergency bulkheads provide 3 hours of emergency lighting on a full charge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP65 rating protects against dust and low-pressure water jets, making the bulkhead suitable for outdoor use under canopies, car park ceilings, loading bays and external corridors. It is not rated for direct exposure to heavy rain or submersion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the battery accessed for testing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe front polycarbonate cover is hinged and can be opened without removing the base from the wall. This allows access to the internal battery, terminal block and test button for routine maintenance and statutory testing.\u003c\/p\u003e","brand":"ESP","offers":[{"title":"Default Title","offer_id":45294087176459,"sku":"EMLED3WMHBULK2","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/EMLED3WMHBULK2_1b5e5df7-dceb-4f38-9b35-265b530262db.jpg?v=1714667918"},{"product_id":"lyyt-50m-multicolour-led-rope-light-230v-ip44-outdoor","title":"LYYT 50m Multicolour LED Rope Light - 230V IP44 Outdoor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT 50m multicolour LED rope light is a mains-operated 230V decorative lighting solution with 36 LEDs per metre housed in a flexible 13mm clear plastic tube. The rope light delivers a repeating sequence of red, green, blue and white LEDs along the full 50m length, producing a multicolour effect suitable for festive displays, architectural accent lighting, pathway marking and outdoor event installations. The IP44 rating protects against water splashes from any direction, making the rope suitable for both indoor and sheltered outdoor use when cut ends and connections are sealed correctly.\u003c\/p\u003e\n\u003cp\u003eThe rope light is supplied on a reel and can be cut only at marked 2m intervals, allowing installations to be tailored to specific lengths while maintaining electrical safety. Each cut point aligns with the internal wiring so the rope remains functional when fitted with a compatible power lead (sold separately). Power leads are available in static on\/off or 8-pattern controller variants, giving control over whether the multicolour sequence stays constant or cycles through different flash and fade patterns. The 60mm minimum bending radius allows the rope to follow curved edges, wrap around columns, outline architectural features and trace signage without kinking the plastic tube.\u003c\/p\u003e\n\u003cp\u003eThe LEDs are rated for 100,000 hours of continuous operation at a power consumption of 3.96-4.56W per metre, producing 144-180 lumens per metre. This gives the full 50m rope a total draw of 198-228W at maximum output. The low wattage-to-length ratio makes the rope light a cost-effective option for large-scale installations compared to incandescent rope light, while the long LED lifespan reduces the frequency of replacement in permanent outdoor displays. The multicolour sequence is fixed and determined by the LED layout within the rope. Pattern control is introduced via the power lead, not the rope itself.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e230Vac, 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : lifespan\u003c\/td\u003e\n\u003ctd\u003e100,000 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo. of LEDs\u003c\/td\u003e\n\u003ctd\u003e36\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003ctd\u003e3.96 - 4.56W\/1m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e50m x 13mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum bending radius\u003c\/td\u003e\n\u003ctd\u003e60mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous flux (Lumens per metre)\u003c\/td\u003e\n\u003ctd\u003e144-180lm\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power lead is needed to operate the rope light?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe rope light requires a compatible LYYT 230V power lead, available in static on\/off or 8-pattern controller versions. These are sold separately and connect to the cut or uncut end of the rope to supply mains power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the rope be cut to a custom length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, but only at the marked 2m intervals along the rope. Cutting between these points will damage the internal wiring and render that section unusable. Each cut point aligns with the LED circuit so the rope remains functional when fitted with a power lead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the rope fully waterproof?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe rope carries an IP44 rating, which protects against water splashes from any direction. This suits sheltered outdoor use such as under eaves, covered patios and pergolas. It is not submersible and cut ends or connection points must be sealed with the appropriate caps or shrink tubing to maintain the IP44 protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the multicolour sequence controlled?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe multicolour LED sequence is fixed within the rope and cannot be changed. Pattern control is introduced via the power lead. Static leads keep the colour sequence constant, while 8-pattern controller leads cycle through different flash, fade and chase effects.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313165525259,"sku":"153.469UK","price":247.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153469UK_0.jpg?v=1784890965"},{"product_id":"lyyt-5m-rgb-led-strip-kit-ip68-12v-with-remote-power-supply","title":"LYYT 5m RGB LED Strip Kit IP68 - 12V with Remote \u0026 Power Supply","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT RGB LED strip kit provides a 5m reel of IP68-rated LED tape with 30 SMD5050 RGB LEDs per metre, packaged with a 12V UK power adaptor, an IR remote controller and the necessary connectors to install the system without additional parts. The IP68 waterproof rating permits full submersion in water, making the strip suitable for pond lighting, bathroom feature lighting behind mirrors or under baths, and outdoor applications where the tape will be exposed to rain or pooled water.\u003c\/p\u003e\n\u003cp\u003eDesigned for DIY installation in homes, caravans, cars and commercial vehicles, the strip has a self-adhesive backing that bonds to clean, dry surfaces including wood, metal, tile and plastic. The 12V low-voltage operation removes the need for a qualified electrician in most domestic applications, and the strip can be cut at 10cm intervals to fit precise lengths. The IR remote cycles through RGB colour options and brightness levels, controlling the entire 5m length from a single controller unit.\u003c\/p\u003e\n\u003cp\u003eEach metre of the strip draws 7.2W at full output, giving a total consumption of 36W for the complete 5m reel. The SMD5050 RGB LEDs produce a beam angle of 130-150°, giving wide-angle colour wash rather than focused spots. The tape measures 12mm wide by 4mm deep in cross-section, allowing it to fit into shallow mounting channels and under kitchen plinths. The included 12V UK adaptor supplies sufficient current for the full 5m reel, and the CR2025 battery for the remote is pre-installed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e12Vdc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of LEDs\u003c\/td\u003e\n\u003ctd\u003e30\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam angle\u003c\/td\u003e\n\u003ctd\u003e130° - 150°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut intervals\u003c\/td\u003e\n\u003ctd\u003e10cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReel length\u003c\/td\u003e\n\u003ctd\u003e5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : type\u003c\/td\u003e\n\u003ctd\u003eSMD5050 RGB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : spacing\u003c\/td\u003e\n\u003ctd\u003e32mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e600mA\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption per metre\u003c\/td\u003e\n\u003ctd\u003e7.2W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross-section\u003c\/td\u003e\n\u003ctd\u003e12 x 5mm (physical dimensions), Tape is 10mm wide RGB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.25KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery : remote\u003c\/td\u003e\n\u003ctd\u003eCR2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens per LED\u003c\/td\u003e\n\u003ctd\u003e16lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153693UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan the strip be used underwater?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP68 rating permits full submersion in water, making it suitable for ponds, water features, aquariums and wet-room applications. Ensure all connections are properly sealed with the included waterproof connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the strip be cut to length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip can be cut at 10cm intervals at marked cut points along the tape. Cutting between these points will damage the circuit and prevent the cut section from lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included in the kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit includes a 5m RGB LED strip reel, a 12V UK plug adaptor, an IR remote controller with battery pre-installed, and the necessary connectors to join the strip to the power supply and controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the adhesive strong enough for permanent installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe self-adhesive backing bonds well to clean, dry, smooth surfaces. For underwater or high-moisture applications, consider using additional cable ties or mounting clips at intervals to secure the strip mechanically, as prolonged water exposure can weaken adhesive bonds over time.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313167458571,"sku":"153.693UK","price":51.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153693UK_0_e71f9b06-48cc-48d1-aefa-739a7e79cf8b.jpg?v=1784891087"},{"product_id":"lyyt-12v-led-strip-light-kit-5m-warm-white-3000k-ip65","title":"LYYT 12V LED Strip Light Kit 5m - Warm White 3000K IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT 12V LED strip light kit supplies 5 metres of warm white LED tape on a reel, a UK mains-to-12Vdc power adaptor, and the connectors needed to install the strip without soldering or specialist tools. The tape carries 60 SMD2835 LEDs per metre, each emitting 11 lumens at 3000K colour temperature, producing a soft warm white glow suited to residential and hospitality applications where ambient rather than task lighting is needed.\u003c\/p\u003e\n\u003cp\u003eDesigned for under-cabinet lighting in kitchens, cove lighting in living rooms, feature lighting behind headboards or mirrors, and accent lighting along shelving or skirting, the strip runs on safe 12Vdc low voltage and draws 4.08W per metre. The IP65 silicone coating protects the LEDs from dust ingress and low-pressure water jets, making the strip suitable for use in kitchens, bathrooms and sheltered outdoor locations such as covered patios or pergolas where direct rain exposure does not occur.\u003c\/p\u003e\n\u003cp\u003eThe self-adhesive backing allows the strip to be pressed onto clean, dry, smooth surfaces including painted walls, MDF, melamine and glass without additional fixings. The tape can be cut to length every 50mm along marked cut points, allowing precise tailoring to alcoves, cabinet runs or architectural features. The 130-150° beam angle from each LED provides wide-angle wash light rather than directional spot illumination, smoothing shadows and reducing visible LED hotspots when the strip is positioned behind a diffuser or recessed into a channel.\u003c\/p\u003e\n\u003cp\u003eThe included 12V 2000mA power adaptor connects to UK mains via a 1.2m cable and terminates in a DC barrel connector on a further 1.2m lead, giving flexibility in positioning the power supply relative to the strip's start point. The LEDs are rated to 25,000 hours at typical residential duty cycles, equivalent to approximately 10 years of use at 7 hours per day.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eOutput - 12Vdc, 2000mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of LEDs\u003c\/td\u003e\n\u003ctd\u003e60\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam angle\u003c\/td\u003e\n\u003ctd\u003e130° - 150°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut intervals\u003c\/td\u003e\n\u003ctd\u003e5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReel length\u003c\/td\u003e\n\u003ctd\u003e5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : spacing\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e340mA\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross-section\u003c\/td\u003e\n\u003ctd\u003e8 x 2.76mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (5m reel)\u003c\/td\u003e\n\u003ctd\u003e0.17KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption per metre\u003c\/td\u003e\n\u003ctd\u003e4.08W\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : quantity per metre\u003c\/td\u003e\n\u003ctd\u003e60\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003eUK plug to adaptor: 1.2m, adaptor to DC connector: 1.2m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eInput - 100-240Vac 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153722UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs the strip dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LEDs themselves can be dimmed, but the kit does not include a dimmer control. To dim this strip you would need to install a compatible 12V LED dimmer between the power adaptor and the strip. Contact us for dimmer recommendations before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating protects against dust and low-pressure water jets, making the strip suitable for sheltered outdoor locations such as covered patios, pergolas or eaves where direct rain exposure does not occur. It is not rated for full immersion or prolonged exposure to heavy rain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I cut the strip to length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strip can be cut every 50mm along marked cut points using scissors or a craft knife. Cut only at the marked points to avoid damaging the circuit. Once cut, the shorter section requires a new connector or soldering to reconnect to power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat surfaces can the adhesive backing stick to?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe self-adhesive backing bonds to clean, dry, smooth surfaces including painted walls, MDF, melamine, glass and metal. Textured, porous or dusty surfaces may require additional mechanical fixing or an adhesive promoter spray applied before installation.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313167556875,"sku":"153.722UK","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153722UK_0_ccb14c3f-0c6c-4a11-af46-8ef4c3d62c57.jpg?v=1784891111"},{"product_id":"lyyt-12v-5m-blue-led-strip-light-kit-ip65-waterproof-with-power-adaptor","title":"LYYT DIY-B60 Waterproof Blue LED Strip Kit","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT 12V blue LED strip light is a 5m reel of flexible LED tape with 60 SMD3528 LEDs per metre, producing a continuous blue glow across the full length. The kit includes the LED strip, a 12V 2A UK mains power adaptor with 1.2m cable to the adaptor and a further 1.2m from adaptor to the DC connector that plugs into the strip. The IP65 silicone coating on the tape protects the LEDs and PCB from dust and water splashes, making it suitable for kitchens, bathrooms, and sheltered outdoor areas under eaves or canopies.\u003c\/p\u003e\n\u003cp\u003eDesigned for accent lighting in bars, gaming rooms, under-cabinet installations, shelving backlighting, and decorative displays, the strip is cuttable at marked 5cm intervals to fit specific lengths without wasting tape. Each cut point has copper contact pads that allow reconnection with soldering or connector accessories (sold separately). The self-adhesive 3M backing tape bonds to smooth, clean surfaces including painted walls, glass, metal and sealed wood, though porous or textured surfaces may require additional mounting clips.\u003c\/p\u003e\n\u003cp\u003eThe 12V DC operation keeps the strip safe to handle during installation and reduces heat output compared to mains-voltage lighting. At 4.08W per metre, the full 5m reel draws approximately 20W, giving a total light output of around 600 lumens across the strip. The 130-150° beam angle from each SMD3528 LED produces wide, even coverage when mounted in channels or along edges. The strip is rated for up to 25,000 hours of operation, equivalent to approximately 2.8 years of continuous use or several decades of typical evening-only use.\u003c\/p\u003e\n\u003cp\u003eThe silicone coating adds approximately 0.8mm thickness to the strip, giving a cross-section of 8.15 x 2.76mm including the PCB. The 173g weight of the full 5m reel means it stays in place once mounted without sagging or peeling on vertical runs. The blue wavelength is fixed. This is a single-colour strip with no dimming or colour-change capability unless paired with a separate 12V PWM dimmer controller (sold separately).\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eOutput - 12Vdc, 2000mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of LEDs\u003c\/td\u003e\n\u003ctd\u003e60\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam angle\u003c\/td\u003e\n\u003ctd\u003e130° - 150°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut intervals\u003c\/td\u003e\n\u003ctd\u003e5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReel length\u003c\/td\u003e\n\u003ctd\u003e5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : spacing\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e340mA\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross-section\u003c\/td\u003e\n\u003ctd\u003e8 x 2.76mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (5m reel)\u003c\/td\u003e\n\u003ctd\u003e0.17KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption per metre\u003c\/td\u003e\n\u003ctd\u003e4.08W\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : quantity per metre\u003c\/td\u003e\n\u003ctd\u003e60\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003eUK plug to adaptor: 1.2m, adaptor to DC connector: 1.2m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eInput - 100-240Vac 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153723UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan the strip be dimmed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strip itself is not dimmable without additional hardware. To dim this strip you need a separate 12V PWM dimmer controller installed between the power supply and the strip. These are sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it safe to use outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating protects against dust and water splashes, making it suitable for sheltered outdoor areas such as under eaves, in covered patios, or inside garden rooms. It is not submersible and should not be exposed to direct rain or standing water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's in the box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit includes a 5m reel of blue LED strip, a 12V 2A UK mains power adaptor, and a DC barrel connector to connect the adaptor to the strip. No additional controllers, dimmers or connectors are included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I reconnect the strip after cutting it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each 5cm cut point has copper contact pads. You can reconnect sections by soldering wires to the pads or by using solder-free connectors designed for 8mm-wide LED strip tape (sold separately).\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313167655179,"sku":"153.723UK","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153723UK_0.jpg?v=1784891133"},{"product_id":"lyyt-12v-led-strip-light-kit-5m-cool-white-6000k-ip65","title":"LYYT 12V LED Strip Light Kit 5m - Cool White 6000K IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT 12V LED strip light kit is a complete 5m installation package containing a flexible LED tape reel, a UK-compatible 12Vdc 2000mA power adaptor, and connector leads for joining the strip to the power supply. The tape uses 60 SMD2835 LEDs per metre running at 6000K cool white, producing a crisp daylight-toned light suited to task lighting, under-cabinet illumination and workspaces. The strip is cuttable at 5cm intervals, allowing precise length adjustment to fit cabinets, shelves or alcoves.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchens, bathrooms, workshops, under-cabinet lighting and display shelving, the tape has an IP65 silicone coating that resists water splashes and dust, making it suitable for humid environments and sheltered outdoor installations. The self-adhesive backing fixes the strip to clean, smooth surfaces including painted wood, MDF, aluminium and glass. The 12Vdc low-voltage operation reduces risk compared to mains-voltage alternatives and allows safe handling during installation.\u003c\/p\u003e\n\u003cp\u003eEach metre of tape consumes 4.08W and delivers approximately 660 lumens (60 LEDs × 11lm per LED). The 5m reel therefore produces 3,300 lumens total when powered end-to-end, equivalent to approximately three 60W incandescent bulbs but drawing only 20.4W from the mains. The SMD2835 LEDs are rated to 25,000 hours, equating to roughly 8-10 years of typical domestic use before noticeable brightness degradation. The tape measures 8.15mm wide and 2.76mm thick including the silicone coating, fitting into narrow channels and recessed profiles.\u003c\/p\u003e\n\u003cp\u003eThe kit includes a UK 3-pin plug, 1.2m cable to the power adaptor, the adaptor unit itself, a further 1.2m cable to the DC connector, and the DC connector that clips onto the copper contact pads at the start of the LED strip. No soldering or specialist electrical knowledge is required. The strip connects via low-voltage push-fit terminals.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eOutput - 12Vdc, 2000mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of LEDs\u003c\/td\u003e\n\u003ctd\u003e60\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam angle\u003c\/td\u003e\n\u003ctd\u003e130° - 150°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut intervals\u003c\/td\u003e\n\u003ctd\u003e5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReel length\u003c\/td\u003e\n\u003ctd\u003e5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : spacing\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e340mA\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross-section\u003c\/td\u003e\n\u003ctd\u003e8 x 2.76mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (5m reel)\u003c\/td\u003e\n\u003ctd\u003e0.17KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption per metre\u003c\/td\u003e\n\u003ctd\u003e4.08W\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : quantity per metre\u003c\/td\u003e\n\u003ctd\u003e60\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003eUK plug to adaptor: 1.2m, adaptor to DC connector: 1.2m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eInput - 100-240Vac 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153725UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan the strip be cut to a custom length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The tape can be cut every 5cm (50mm) at marked cutting points. Each cutting point sits between sets of LEDs and has copper contact pads on both sides, allowing you to reconnect cut sections using additional connectors (sold separately) or to discard the excess length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 silicone coating resists water splashes and steam, making the strip suitable for bathrooms when mounted outside shower enclosures and away from direct water jets. It should not be submerged or installed inside a shower cubicle. The power adaptor must be positioned outside bathroom zones or in a zone-compliant location.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's in the box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit includes the 5m LED tape reel on a spool, a UK 3-pin plug with 1.2m cable, a 12Vdc power adaptor, a 1.2m cable from adaptor to DC connector, and a DC connector that clips onto the strip's copper contact pads. You do not need to purchase additional components for a basic single-strip installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple strips be joined end-to-end?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe included power adaptor supplies 2000mA at 12Vdc, which is sufficient for the full 5m length (5m × 340mA\/m = 1,700mA). Adding additional strips requires calculating total current draw and may require a higher-capacity power supply. Joining strips also requires additional connectors.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313168081163,"sku":"153.725UK","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153725UK_0.jpg?v=1784891159"},{"product_id":"lyyt-5m-rgb-led-strip-light-kit-12v-ip65-with-remote-power-supply","title":"LYYT DIY-RGB30 RGB Waterproof LED Strip Light Kit","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT 5m RGB LED strip light kit includes a 5-metre reel of IP65-rated LED tape, a 12V mains power supply, an IR remote controller and the connection accessories needed to get the installation running. The tape itself carries 30 SMD5050 RGB LEDs per metre, giving 150 LEDs across the full 5m length, with each LED capable of displaying red, green or blue independently to create colour-changing effects controlled from the included remote.\u003c\/p\u003e\n\u003cp\u003eDesigned for accent lighting in homes, motor homes, caravans, under-cabinet installations, cove lighting and vehicle interiors, the strip can be cut at 10cm intervals to fit exact lengths without wasting tape. The transparent silicone coating over the LEDs provides IP65-rated protection against dust and water jets, making the strip suitable for kitchens, bathrooms and outdoor installations under shelter. The self-adhesive backing allows the tape to be pressed directly onto clean, dry surfaces without additional fixings.\u003c\/p\u003e\n\u003cp\u003eThe 12V operation keeps the installation low-voltage, and the included UK mains adaptor converts 230V down to 12V DC before the tape. The IR remote offers colour selection, brightness adjustment and dynamic colour-changing modes. For runs longer than 5m, the strip can be extended using an RGB amplifier (AVSL 153.771UK) and splitter (153.900UK), sold separately. Power consumption is 7.2W per metre, so the full 5m reel draws 36W at maximum brightness across all three colour channels.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e12Vdc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam angle\u003c\/td\u003e\n\u003ctd\u003e130 - 150°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReel length\u003c\/td\u003e\n\u003ctd\u003e5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : type\u003c\/td\u003e\n\u003ctd\u003eSMD5050 RGB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross-section\u003c\/td\u003e\n\u003ctd\u003e10 x 2.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.23KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of LEDs\u003c\/td\u003e\n\u003ctd\u003e30\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption per metre\u003c\/td\u003e\n\u003ctd\u003e7.2W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : spacing\u003c\/td\u003e\n\u003ctd\u003e32mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut intervals\u003c\/td\u003e\n\u003ctd\u003e10cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e600mA\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens per LED\u003c\/td\u003e\n\u003ctd\u003e16lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153727UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan the strip be cut to shorter lengths?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The tape can be cut at 10cm intervals along its length, marked by cut points on the strip itself. Cutting at other points will damage the circuit and void the warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP65 mean for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 means the strip is protected against dust ingress and water jets from any direction. It can be used in bathrooms, kitchens and outdoor installations under shelter, but should not be submerged or exposed to heavy rain without additional protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the strip powered?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit includes a 12V DC mains power supply with a UK plug. The power supply connects to the IR controller, which then connects to the strip. The full 5m reel draws 36W at maximum brightness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the strip be extended beyond 5 metres?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, using an RGB amplifier (AVSL 153.771UK) and splitter (153.900UK), sold separately. The amplifier boosts the signal to maintain colour consistency and brightness across longer runs.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313168212235,"sku":"153.727UK","price":41.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153727UK_0.jpg?v=1784891188"},{"product_id":"lyyt-12v-led-strip-light-kit-5m-yellow","title":"LYYT 12V LED Strip Light Kit 5m - Yellow","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT 12V LED strip light kit includes a 5m reel of yellow LED tape with 60 SMD2835 LEDs per metre, a 12V 2A UK mains adaptor, and DC connectors for installation. The tape carries an IP65 rating with a clear silicone coating that protects the LEDs and circuit board from moisture and dust, making it suitable for kitchens, bathrooms, under-cabinet lighting, and vehicle interiors where low-voltage operation is required.\u003c\/p\u003e\n\u003cp\u003eThe tape is cuttable at marked 5cm intervals along its length, allowing it to be trimmed to fit exact cabinet runs, shelving, kickboards, or accent lighting positions. Each section carries a self-adhesive backing that peels away to expose the adhesive, which bonds to clean, dry surfaces including painted wood, metal, glass, and plastic. The 12V DC operation means the tape runs cooler than mains-voltage LED strips and can be handled safely during installation without isolating mains circuits.\u003c\/p\u003e\n\u003cp\u003eThe yellow LED output provides accent lighting rather than task illumination, with each LED producing approximately 11 lumens at a 130-150° beam angle. The tape consumes 4.08W per metre, giving a total draw of approximately 20W for the full 5m reel. The SMD2835 LED spacing of 16mm along the tape creates a continuous line of light when viewed from a short distance, rather than individual visible points.\u003c\/p\u003e\n\u003cp\u003eThe kit arrives with everything needed for a basic installation: the 5m reel on a spool, the 12V UK plug-top power supply with 1.2m mains cable and 1.2m low-voltage cable, and DC connectors for joining the tape to the power supply. The tape cross-section of 8.15 x 2.76mm fits into shallow channels and tight spaces where thicker LED strips would not.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eOutput - 12Vdc, 2000mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of LEDs\u003c\/td\u003e\n\u003ctd\u003e60\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam angle\u003c\/td\u003e\n\u003ctd\u003e130° - 150°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut intervals\u003c\/td\u003e\n\u003ctd\u003e5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReel length\u003c\/td\u003e\n\u003ctd\u003e5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : spacing\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e340mA\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross-section\u003c\/td\u003e\n\u003ctd\u003e8 x 2.76mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (5m reel)\u003c\/td\u003e\n\u003ctd\u003e0.17KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption per metre\u003c\/td\u003e\n\u003ctd\u003e4.08W\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : quantity per metre\u003c\/td\u003e\n\u003ctd\u003e60\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003eUK plug to adaptor: 1.2m, adaptor to DC connector: 1.2m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eInput - 100-240Vac 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153728UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan the tape be cut to a custom length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The tape carries cut marks every 5cm along its length. Cut only at the marked points to avoid damaging the circuit. Each cut section can be rejoined using additional DC connectors or soldered connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the IP65 rating suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 protects against moisture and dust but is not fully waterproof or submersible. The tape is suitable for indoor humid environments (kitchens, bathrooms) and sheltered outdoor locations where it will not be directly exposed to rain or standing water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the kit include dimming capability?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The kit includes a fixed-output 12V power supply. To add dimming, you would need to install a compatible 12V LED dimmer between the power supply and the tape (sold separately).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat surfaces does the self-adhesive backing stick to?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adhesive bonds to clean, dry, smooth surfaces including painted wood, metal, glass, and hard plastics. It does not adhere well to textured, dusty, or oily surfaces. Wipe the surface with isopropyl alcohol before applying the tape for best adhesion.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313168376075,"sku":"153.728UK","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153728UK_0.jpg?v=1784891212"},{"product_id":"lyyt-12v-led-strip-light-5m-green-ip65-waterproof","title":"LYYT 12V LED Strip Light 5m Green - IP65 Waterproof","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT 12V Green LED Strip Light is a 5m flexible LED tape with 60 SMD3528 LEDs per metre, producing a vivid green glow at 6 lumens per LED. The kit includes the LED strip on a reel, a UK mains plug with 12V 2000mA power adaptor, DC connector and tape-to-connector cable, providing everything needed for installation without additional components.\u003c\/p\u003e\n\u003cp\u003eDesigned for decorative accent lighting in residential and hospitality settings, the strip suits under-cabinet lighting in kitchens, cove lighting around ceilings, shelf and alcove highlighting, and feature wall washing where coloured light is required. The IP65 rating means the strip is protected against dust ingress and low-pressure water jets, making it suitable for bathrooms, kitchens and sheltered outdoor locations such as covered patios or under-eave installations. The strip cannot be submerged or exposed to continuous rain.\u003c\/p\u003e\n\u003cp\u003eThe strip can be cut at 5cm intervals along marked cutting points, allowing precise length adjustment to fit the installation space. Each cut section can be reconnected using additional connectors (sold separately) if needed. The self-adhesive backing uses a peel-and-stick 3M-type adhesive that bonds to clean, dry, smooth surfaces including painted walls, metal, glass and sealed wood. Operating at 12V DC low voltage keeps the strip cool to touch and reduces electrical risk compared to mains-voltage alternatives.\u003c\/p\u003e\n\u003cp\u003eAt 4.08W per metre, the full 5m reel draws approximately 20W total power from the included adaptor. The 130-150° beam angle from the SMD3528 chips provides wide light distribution suitable for wash lighting rather than spotlighting. The strip weighs 173g for the full 5m reel and measures 8.15mm wide by 2.76mm thick, sitting flush against mounting surfaces once installed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eOutput - 12Vdc, 2000mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of LEDs\u003c\/td\u003e\n\u003ctd\u003e60\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam angle\u003c\/td\u003e\n\u003ctd\u003e130° - 150°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut intervals\u003c\/td\u003e\n\u003ctd\u003e5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReel length\u003c\/td\u003e\n\u003ctd\u003e5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : spacing\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e340mA\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross-section\u003c\/td\u003e\n\u003ctd\u003e8 x 2.76mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (5m reel)\u003c\/td\u003e\n\u003ctd\u003e0.17KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption per metre\u003c\/td\u003e\n\u003ctd\u003e4.08W\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : quantity per metre\u003c\/td\u003e\n\u003ctd\u003e60\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003eUK plug to adaptor: 1.2m, adaptor to DC connector: 1.2m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eInput - 100-240Vac 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153729UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan the strip be cut to a shorter length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip has marked cutting points every 5cm (50mm). Cut only at these points to avoid damaging the circuit. Each cut section loses the connector at the end, so additional connectors are needed to reconnect sections or extend runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the strip dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strip itself can accept dimming if paired with a compatible 12V DC dimmer controller (sold separately). The included power supply does not provide dimming control on its own.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does IP65 mean for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 means the strip is dust-tight and protected against low-pressure water jets from any direction. It can be used in bathrooms, kitchens and sheltered outdoor areas but cannot be submerged or left exposed to continuous rain. For fully outdoor exposed installations, an IP67 or IP68 rated product is more appropriate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the strip mounted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe back of the strip has a peel-off self-adhesive backing. Clean and dry the mounting surface thoroughly, peel the backing tape, and press the strip firmly into place. The adhesive bonds best to smooth, non-porous surfaces such as painted plaster, metal, glass or sealed wood.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313168703755,"sku":"153.729UK","price":20.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153729UK_0.jpg?v=1784891235"},{"product_id":"lyyt-12v-5m-red-led-strip-light-kit-ip65-with-power-supply","title":"LYYT 12V 5m Red LED Strip Light Kit - IP65 with Power Supply","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT 12V red LED strip light is a 5m reel of flexible SMD3528 LED tape with 60 LEDs per metre, supplied as a complete kit with a 12Vdc 2A power supply, DC connector and UK plug. The tape is cuttable at 5cm intervals along marked copper contact points, allowing it to be shortened or divided to fit under-cabinet runs, shelf edges, cove lighting and display cases. An adhesive backing on the tape allows it to be stuck directly to clean, dry surfaces without brackets or clips.\u003c\/p\u003e\n\u003cp\u003eThe IP65 silicone coating provides protection against dust and water splashes, making the strip suitable for kitchens, bathrooms, home bars and sheltered outdoor installations where the tape is mounted under eaves or within covered patios. The low 12Vdc operating voltage reduces shock risk compared to mains-voltage tape, and the supplied power adaptor converts UK 230V mains to the required 12V output. The total power draw for the full 5m reel is approximately 20W, or 4.08W per metre.\u003c\/p\u003e\n\u003cp\u003eEach SMD3528 LED emits 6 lumens in red, giving a combined output of approximately 1,800 lumens across the full 5m reel. The 130-150° beam angle from surface-mounted LEDs creates a wide wash of red light rather than a focused beam, making the strip effective for ambient accent lighting, architectural highlighting and decorative installations. The tape weighs 173g for the full 5m reel and measures 8.15mm wide by 2.76mm thick, allowing it to fit into narrow channels and behind trim.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eOutput - 12Vdc, 2000mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of LEDs\u003c\/td\u003e\n\u003ctd\u003e60\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam angle\u003c\/td\u003e\n\u003ctd\u003e130° - 150°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut intervals\u003c\/td\u003e\n\u003ctd\u003e5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReel length\u003c\/td\u003e\n\u003ctd\u003e5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : spacing\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e340mA\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross-section\u003c\/td\u003e\n\u003ctd\u003e8 x 2.76mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (5m reel)\u003c\/td\u003e\n\u003ctd\u003e0.17KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption per metre\u003c\/td\u003e\n\u003ctd\u003e4.08W\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : quantity per metre\u003c\/td\u003e\n\u003ctd\u003e60\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003eUK plug to adaptor: 1.2m, adaptor to DC connector: 1.2m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eInput - 100-240Vac 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153730UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan the strip be cut to a shorter length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The tape is cuttable every 5cm along marked copper contact points. Cut only at these marked points to ensure the remaining sections continue to function. Each cut segment will need its own 12V power connection to operate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the strip dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot with the supplied power adaptor. Dimming requires a compatible 12V LED dimmer controller installed between the power supply and the tape. These are sold separately and must be rated for the total wattage of the connected strip length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP65 rating protects against dust and water splashes but not full submersion or prolonged exposure to rain. Use outdoors only in sheltered locations such as under eaves, within covered patios, or inside weatherproof channels. The power supply is not rated for outdoor use and must remain indoors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included in the kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit includes a 5m reel of red LED tape, a 12Vdc 2A power adaptor, a DC barrel connector, and a UK 3-pin plug. The lead from the UK plug to the adaptor is 1.2m, and the lead from the adaptor to the DC connector is 1.2m.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313169195275,"sku":"153.730UK","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153730UK_0.jpg?v=1784891257"},{"product_id":"lyyt-12v-5m-led-strip-light-kit-pink-ip65","title":"LYYT 12V 5m LED Strip Light Kit - Pink IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT 12V pink LED strip light is a 5m reel carrying 60 SMD3528 LEDs per metre, supplied with a 12V 2000mA power supply, UK plug adaptor, and DC connector for immediate installation. The strip emits pink light at 6 lumens per LED and can be cut at 5cm intervals to fit cupboards, alcoves, shelving, vehicle interiors, or any run requiring accent lighting under 5m.\u003c\/p\u003e\n\u003cp\u003eThe IP65 silicone coating protects the strip against dust ingress and water jets from any direction, making it suitable for kitchens, bathrooms under shelving or cabinetry, and sheltered outdoor locations such as covered patios or caravan awnings. The self-adhesive backing bonds to clean, dry surfaces including painted wood, melamine, metal, and glass, though permanent fixing with cable clips is recommended where the strip will be exposed to vibration or high humidity over time.\u003c\/p\u003e\n\u003cp\u003eOperating at 12Vdc and drawing 4.08W per metre (20.4W total for the full 5m reel), the strip runs cool to the touch and is safe for installation in confined spaces where mains voltage tape would require additional earthing and insulation. The 130-150° beam angle from each SMD3528 LED gives wide lateral spread along the tape, avoiding the striped effect sometimes seen with narrow-beam strip products. At 25,000-hour rated lamp life under typical domestic use, the LEDs outlast filament and halogen equivalents by a factor of ten or more.\u003c\/p\u003e\n\u003cp\u003eThe kit includes 1.2m of cable from the UK plug to the power supply adaptor, and a further 1.2m from the adaptor to the DC connector that clips onto the strip. This gives flexibility to position the power supply away from the strip itself, useful when the strip is being installed inside furniture or behind panels where the power supply would not fit.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eOutput - 12Vdc, 2000mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of LEDs\u003c\/td\u003e\n\u003ctd\u003e60\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam angle\u003c\/td\u003e\n\u003ctd\u003e130° - 150°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut intervals\u003c\/td\u003e\n\u003ctd\u003e5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReel length\u003c\/td\u003e\n\u003ctd\u003e5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : spacing\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e340mA\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross-section\u003c\/td\u003e\n\u003ctd\u003e8 x 2.76mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (5m reel)\u003c\/td\u003e\n\u003ctd\u003e0.17KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption per metre\u003c\/td\u003e\n\u003ctd\u003e4.08W\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : quantity per metre\u003c\/td\u003e\n\u003ctd\u003e60\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003eUK plug to adaptor: 1.2m, adaptor to DC connector: 1.2m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eInput - 100-240Vac 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153735UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan the strip be cut to length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip has cut marks every 5cm along its length. Cut only at these marked points to avoid damaging the circuit. Once cut, the remaining section can be reconnected using additional DC connectors (sold separately).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the strip dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strip itself is not dimmable via the included power supply. Dimming requires a separate 12V PWM dimmer controller installed between the power supply and the strip. Please contact us if you need a compatible dimming solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can the IP65 strip be installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 protection allows installation in kitchens, bathrooms (avoiding direct spray zones), and sheltered outdoor locations such as covered patios, caravan awnings, or vehicle interiors. The strip is not submersible and should not be installed in areas subject to pooling water or direct hose-down.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included in the kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit includes the 5m LED strip on a reel, a 12V 2000mA power supply with UK plug, and a DC connector to attach the power supply to the strip. No additional components are required for basic installation, though cable clips may be useful for securing the strip in high-vibration or high-humidity environments.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313169424651,"sku":"153.735UK","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153735UK_0.jpg?v=1784891284"},{"product_id":"lyyt-12v-ip65-led-strip-kit-5m-warm-white-to-cool-white-3000k-6000k","title":"LYYT DIY-DW120 Warm-to-Cool Waterproof LED Strip","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT 12V LED strip kit provides 5 metres of flexible IP65-rated LED tape with adjustable colour temperature, controlled by an infrared remote. The strip combines 60 SMD3528 LEDs per metre in alternating warm white (3000K) and cool white (6000K) positions, allowing the IR controller to blend between warm, neutral and cool tones. The kit arrives with a UK mains adaptor, an IR controller, connecting cables and the reel of tape pre-assembled and ready to install.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchens, bathrooms, under-cabinet lighting, caravans, and vehicles, the strip operates on low-voltage 12Vdc and carries an IP65 rating from its epoxy silicone coating. This protects the LEDs from dust and water jets, making it suitable for bathrooms (zones 2 and 3) and outdoor applications under cover. The self-adhesive backing allows the strip to be applied directly to clean, dry surfaces, and the tape can be cut at 10cm intervals to fit custom lengths without waste.\u003c\/p\u003e\n\u003cp\u003eEach metre draws 3.6W at 300mA and produces 360 lumens total output when all LEDs are active. The 120° beam angle from the SMD3528 chips provides even wash lighting rather than spotlighting, making the strip suitable for accent lighting, task lighting under worktops, and indirect cove lighting. The remote controller operates on a CR2025 battery (included) and offers pre-set colour temperature modes plus manual dimming.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e12Vdc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of LEDs\u003c\/td\u003e\n\u003ctd\u003e60\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam angle\u003c\/td\u003e\n\u003ctd\u003e120°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut intervals\u003c\/td\u003e\n\u003ctd\u003e10cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReel length\u003c\/td\u003e\n\u003ctd\u003e5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : type\u003c\/td\u003e\n\u003ctd\u003eSMD3528\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : spacing\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e300mA\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption per metre\u003c\/td\u003e\n\u003ctd\u003e3.6W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross-section\u003c\/td\u003e\n\u003ctd\u003e10 x 3.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.25KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWarm white (3000K) \u0026amp; cool white (6000K)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens per LED\u003c\/td\u003e\n\u003ctd\u003e6lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery : remote\u003c\/td\u003e\n\u003ctd\u003eCR2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153739UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this strip be cut to fit a specific length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The strip has designated cut points every 10cm (100mm). Cut only at these marked intervals to avoid damaging the circuit. Once cut, the remaining section can be reconnected using additional connectors sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the IP65 rating and where can I use this strip?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIP65 means the strip is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for bathroom zones 2 and 3, under kitchen worktops where splashes may occur, and outdoor applications where the strip is sheltered from direct rain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the colour temperature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IR remote controller allows you to select warm white only, cool white only, or blended modes that mix both LED types for neutral white tones between 3000K and 6000K. The remote also controls dimming and on\/off functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power supply is needed if I extend beyond 5 metres?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach metre draws 3.6W at 12Vdc. For runs longer than 5m (total 18W), you will need a higher-rated 12V power supply and potentially a separate run to avoid voltage drop. The included UK adaptor is rated for the 5m kit as supplied.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313169457419,"sku":"153.739UK","price":36.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/153739UK_0.jpg?v=1784891316"},{"product_id":"lyyt-230v-ip44-led-rope-light-45m-orange","title":"LYYT 230V IP44 LED Rope Light 45m - Orange","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT 230V IP44 LED rope light is a 45m reel of orange LED rope supplied on a grey spool, with rice-style LED bulbs positioned every 27.7mm inside 13mm diameter flexible clear plastic tubing. The rope runs on mains 230V 50Hz and delivers 16.4W per metre through 36 bulbs per metre, producing a continuous orange glow along the length. The IP44 rating allows outdoor use in rain and damp conditions where the rope is protected from direct water jets.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial displays, signage borders, architectural accent lighting, festive decoration and event installations, the rope can be cut only at marked 1m intervals to fit specific lengths. Each cut length requires a power connector lead (part 153.624UK, sold separately) to connect to mains supply. Up to two 45m rolls can be connected end-to-end for extended runs of up to 90m, provided the total wattage remains within safe limits for the supply circuit. The rope must be fully uncoiled from the spool before connection and use to prevent heat build-up.\u003c\/p\u003e\n\u003cp\u003eThe 13mm tubing has a 60mm minimum bending radius, allowing tight curves around architectural features, signage edges and display frameworks without kinking or damaging the internal LED circuit. The orange plastic is UV-resistant for outdoor longevity and the rice bulbs are rated for 25,000 hours of continuous operation. The rope is dimmable when paired with a compatible mains dimmer, allowing brightness adjustment for different times of day or event requirements.\u003c\/p\u003e\n\u003cp\u003eThe temperature range of -20°C to 80°C allows year-round outdoor installation in UK climates without performance degradation. The spool format simplifies handling and storage for professional installers working on multi-site contracts or seasonal decoration programmes.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e230Vac, 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp life (hours)\u003c\/td\u003e\n\u003ctd\u003e25000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e45.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo. of bulbs\u003c\/td\u003e\n\u003ctd\u003e36\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating\u003c\/td\u003e\n\u003ctd\u003e16.4W\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003e-20 - 80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e13mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum bending radius\u003c\/td\u003e\n\u003ctd\u003e60mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/155035UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan the rope be cut to custom lengths?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe rope can only be cut at marked 1m intervals. Cutting between the marked points will damage the circuit and prevent the cut section from working. Each cut length requires a separate power connector lead (part 153.624UK) to connect to mains supply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it safe to use outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP44 rating protects the rope from rain and outdoor damp, provided it is not submerged or subjected to direct water jets. The operating temperature range of -20°C to 80°C allows year-round outdoor installation in UK climates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need to be fully uncoiled before use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The rope must be completely uncoiled from the spool before connecting to mains power. Leaving it coiled creates heat build-up from the combined wattage of multiple metres in close proximity, which can damage the tubing and the LED circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many rolls can be connected together?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUp to two 45m rolls can be connected end-to-end, giving a maximum continuous run of 90m. The combined wattage (45m × 16.4W\/m = 738W per roll) must be within the safe capacity of the supply circuit and any dimmer used.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313176961291,"sku":"155.035UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/155035UK_0.jpg?v=1784892405"},{"product_id":"lyyt-led-hd180s-mc-rgba-heavy-duty-festoon-string-lights","title":"LYYT LED HD180S-MC RGBA Heavy Duty Festoon String Lights","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT 180 LED static string light delivers 18m of lit length (19.5m total) with 180 multicolour LEDs in an RGBA configuration. Red, green, blue and amber bulbs spaced at 100mm intervals on a black heavy-duty rubber cable. The LEDs emit steady, non-flashing light from concave heads that distribute colour evenly without hot spots. Rated at IP44, the string is resistant to rain and moisture, making it suitable for outdoor use throughout the year.\u003c\/p\u003e\n\u003cp\u003eDesigned for garden perimeter lighting, fence decoration, commercial frontages and event installations, the string runs on 220-240V mains and draws a maximum of 7W across the full 180 LEDs. Up to six sets can be daisy-chained from a single plug socket, allowing runs of up to 120m (1,080 LEDs) without additional outlets. The 1.5m mains lead on the first set provides flexibility in locating the nearest power source.\u003c\/p\u003e\n\u003cp\u003eThe UV-resistant rubber cable remains supple in cold weather and resists cracking under prolonged sunlight exposure, giving the string durability for permanent or semi-permanent installations. The RGBA colour mix produces a festive multi-tone effect suited to Christmas, New Year and celebratory events, while the static mode (no flashing or sequencing) provides a calmer aesthetic for year-round garden accent lighting or hospitality venue exteriors. The string weighs 1.3kg, light enough to be supported by garden wire, fence panels or masonry hooks without sagging.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e220-240Vac, 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable colour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED : spacing\u003c\/td\u003e\n\u003ctd\u003e100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003eHeavy Duty UV resistant Rubber Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan these lights be used outdoors all year?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP44 rating means the LEDs and cable connections are protected against rain and moisture from any direction. The UV-resistant rubber cable is designed to withstand prolonged outdoor exposure without cracking or degrading in sunlight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many sets can be connected together?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUp to six sets can be connected end-to-end from a single mains plug, creating a total lit length of 108m (6 × 18m) with 1,080 LEDs. This allows large-scale installations without needing multiple power sources.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the lights flash or sequence?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. These are static string lights with a steady, non-flashing output. The RGBA LEDs remain continuously lit in their respective colours once powered on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does RGBA mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRGBA stands for red, green, blue and amber. The 180 LEDs are divided between these four colours and distributed along the cable to create a multicolour effect when lit.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313181384971,"sku":"155.410UK","price":51.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/155410UK_0.jpg?v=1784892616"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/collections\/Menu_images_f0dec00d-c62b-4c1f-b9d4-b2e394ecec54.jpg?v=1781688643","url":"https:\/\/niori.co.uk\/collections\/bathroom-lights.oembed?page=22","provider":"Niori","version":"1.0","type":"link"}