{"title":"AV Accessories","description":"\u003cp\u003eOur range of AV accessories covers the parts that keep an existing system working, from replacement remote controls and Bluetooth receivers to ground loop isolators, computing accessories and screen cleaning kits. Most are inexpensive fixes for problems that otherwise look like a reason to replace the equipment. Found it cheaper elsewhere? We will match the price.\u003c\/p\u003e","products":[{"product_id":"rj45-strain-relief-boot-10-pack-black","title":"RJ45 Strain Relief Boot 10-Pack - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThese RJ45 strain relief boots fit over standard RJ45 network cable connectors to protect the termination point from mechanical stress caused by repeated cable bending or pulling. Each boot slides over the cable before the RJ45 plug is crimped, then clips onto the rear of the connector after termination to provide a flexible transition between the rigid plug body and the cable jacket.\u003c\/p\u003e\n\u003cp\u003eDesigned for both stranded and solid conductor network cables, the boots work with Cat5e, Cat6 and Cat6a cable types in standard 5-8mm jacket diameters. They are commonly used in AV installations, network patch panels, and any environment where RJ45 connections are subject to frequent movement or where a professional finish is required. The ribbed profile on the boot provides grip and reduces the chance of the cable being pulled out of the connector under load.\u003c\/p\u003e\n\u003cp\u003eMoulded from black flexible PVC, each boot measures 25mm in length, 14mm wide and 14mm high once fitted, adding minimal bulk to the connector. The material is soft enough to flex with the cable but stiff enough to prevent sharp bends immediately behind the plug. Supplied in a pack of 10, suitable for terminating a batch of cables or keeping as spares for field repairs.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e25mm x 14mm x 14mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent rating\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eModular (RJ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eAre these compatible with all RJ45 plugs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese boots fit standard 8P8C RJ45 plugs used with Cat5e, Cat6 and Cat6a cables. They work with most common RJ45 connectors including pass-through and standard crimp types, provided the cable jacket diameter is between 5mm and 8mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I fit the boot before or after crimping the connector?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe boot must be slid onto the cable before the RJ45 plug is crimped. Once the connector is terminated and tested, slide the boot forward and clip it onto the rear of the plug body.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable jacket sizes do they accommodate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe internal diameter of the boot suits standard network cable jackets between 5mm and 8mm, which covers most Cat5e, Cat6 and Cat6a cables in residential and commercial use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many boots are in a pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is for a pack of 10 black RJ45 strain relief boots.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313086292235,"sku":"113.120UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/113120UK_0.jpg?v=1784885539"},{"product_id":"av-link-adsl-signal-filter-bt431a-to-rj11-bt431a","title":"AV:Link ADSL Signal Filter - BT431A to RJ11 \u0026 BT431A","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link ADSL signal filter is a white plastic adapter that converts a single BT431A telephone plug into two outputs: one RJ11 socket for ADSL broadband connection and one filtered BT431A socket for a telephone or fax machine. The internal filter separates the high-frequency ADSL signal from the voice-frequency telephone signal, preventing interference between the two devices when both share the same phone line.\u003c\/p\u003e\n\u003cp\u003eDesigned for UK residential and small office installations where ADSL broadband and a landline telephone connect to the same wall socket, the filter plugs directly into the BT431A master socket or extension and requires no tools or wiring. The ADSL modem or router connects to the RJ11 socket, while the telephone or fax connects to the filtered BT431A socket. Up to four filters can be used on a single telephone line if multiple extension points need filtering, though most installations only require one filter at the master socket.\u003c\/p\u003e\n\u003cp\u003eThe filter weighs 25g and measures approximately 60mm x 40mm x 25mm, so it sits flush against the wall socket without obstructing adjacent sockets or furniture. The white plastic casing matches standard UK telephone wall plates and the design includes no LEDs or moving parts, making it a passive, maintenance-free component once installed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent rating\u003c\/td\u003e\n\u003ctd\u003e431\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eModular (RJ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is an ADSL filter needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eADSL broadband and telephone voice signals share the same copper line but use different frequency ranges. Without a filter, the ADSL signal can cause crackling, static or interference on the telephone line, and the telephone signal can disrupt the broadband connection. The filter separates the two signals so each device receives only the frequencies it needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere should the filter be installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe filter plugs directly into the BT431A wall socket where the ADSL modem or router would normally connect. If you have multiple telephone extension sockets in the property and use phones on those extensions, each extension socket may need its own filter to prevent interference. Most users only need one filter at the master socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple filters be used on one line?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Up to four ADSL filters can be used on a single telephone line if you have multiple extension points. Each extension socket with a connected telephone or fax should have its own filter to prevent the telephone device from interfering with the ADSL signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with fibre broadband?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This filter is designed for ADSL (Asymmetric Digital Subscriber Line) broadband, which runs over traditional copper telephone lines. If your broadband is delivered via fibre-to-the-cabinet (FTTC) or fibre-to-the-premises (FTTP), you typically do not need an ADSL filter as the broadband signal does not share the voice line in the same way.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313094713611,"sku":"113.538UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/113538UK_0.jpg?v=1784889067"},{"product_id":"av-link-rj11-plug-to-2-x-rj11-socket-splitter","title":"AV:Link RJ11 Plug to 2 x RJ11 Socket Splitter","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link RJ11 splitter connects a single RJ11 plug to two RJ11 sockets, allowing two telephone or data devices to share one outlet. The adapter supports standard 6P4C RJ11 wiring used in telephone and ADSL modem connections, with passive pass-through that requires no external power.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and small office use where a single telephone line needs to feed two devices. Such as a landline phone and an ADSL modem, or two separate phone handsets in different rooms connected via extension cable. The splitter fits USA and Southern Ireland telephone socket standards, and the compact form factor allows it to sit flush against a wall plate without blocking adjacent sockets.\u003c\/p\u003e\n\u003cp\u003eThe adapter weighs 11g and measures approximately 40mm across the face, small enough to fit in tight spaces behind furniture or along skirting board cable runs. The two output sockets are wired in parallel, so both devices receive the same signal simultaneously. This is a passive splitter with no filtering or switching. Both outputs are always active when the input plug is connected to a live line.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.01KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for ADSL broadband?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The splitter supports ADSL modem connections and is commonly used to connect a modem and a landline phone to the same telephone socket. Both devices will share the line. If the phone is in use, it may affect broadband performance temporarily.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with UK BT telephone sockets?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis splitter uses RJ11 connectors, which are standard in the USA and Southern Ireland. UK BT telephone sockets use a different connector type (BT431A). To use this splitter with a UK socket, you would need a BT to RJ11 adapter between the wall socket and this splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre both outputs active at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The two RJ11 sockets are wired in parallel, so both receive the same signal simultaneously. This is a passive splitter with no switching or filtering. When the input plug is connected to a live line, both outputs are live.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313094975755,"sku":"113.544UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/113544UK_0.jpg?v=1784889081"},{"product_id":"av-link-right-angle-hdmi-plug-to-socket-adapter-gold-plated","title":"AV:Link Right Angle HDMI Plug to Socket Adapter - Gold Plated","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link right-angle HDMI adapter converts a straight HDMI cable to a 90-degree orientation, with a male HDMI plug on one end and a female HDMI socket on the other. The plug end sits at a right angle to the socket end, allowing HDMI cables to run flat against a wall or downwards from a tight-clearance connection point instead of projecting straight out.\u003c\/p\u003e\n\u003cp\u003eDesigned for wall-mounted TVs, media players installed in confined cabinet spaces, and equipment racks where standard straight HDMI cables would protrude too far from the back panel, the adapter reduces the clearance needed behind the connected device by routing the cable parallel to the surface. Both connectors carry gold-plated pins to maintain signal integrity across the full HDMI bandwidth, supporting 4K video, multi-channel audio and HDCP copy protection without signal degradation.\u003c\/p\u003e\n\u003cp\u003eThe compact adapter body measures approximately 40mm long from plug tip to socket opening, with a moulded plastic shell that protects the internal wiring from repeated connection cycles. The right-angle orientation bends the cable run downwards when the plug is inserted horizontally, or sideways when inserted vertically, giving flexibility to route cables in whichever direction the installation demands. The adapter works with all standard HDMI cable types including High Speed HDMI and HDMI with Ethernet variants.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this support 4K and HDR video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adapter maintains full HDMI signal integrity including 4K resolution, HDR metadata, multi-channel audio and HDCP copy protection. It works as a passive connector with no active electronics that would limit bandwidth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich direction does the cable exit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe HDMI plug end sits at 90 degrees to the socket end. When the plug is inserted into a device, the socket opening points perpendicular to the plug direction, allowing the connected cable to run flat against a wall or downwards depending on how the adapter is oriented.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with HDMI cables that have bulky connector housings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adapter works with standard HDMI cables. Very thick or over-moulded cable connectors may be too large to fit the socket opening. Measure the cable connector width before ordering if the cable housing is unusually bulky.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in both directions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. HDMI is bidirectional for standard video and audio signals. The adapter can convert a source device output or a display device input depending on which end you connect to which equipment.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313113325835,"sku":"122.399UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122399UK_0.jpg?v=1784889386"},{"product_id":"av-link-hdmi-female-to-female-coupler-adapter","title":"AV:Link HDMI Female to Female Coupler Adapter","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link HDMI coupler is a female-to-female adapter with HDMI sockets at both ends, designed to join two standard HDMI cables into a single extended run. The coupler supports video resolutions up to 3840 x 2160p (4K) and uses gold-plated contacts to maintain signal integrity across the join.\u003c\/p\u003e\n\u003cp\u003eUsed where a single HDMI cable is too short to reach between a source device and a display, the coupler allows two existing cables to be connected end-to-end without needing to replace either cable. Common applications include extending runs between wall-mounted TVs and AV receivers, projectors and media players, or games consoles and displays where furniture layout or room dimensions prevent a direct single-cable connection.\u003c\/p\u003e\n\u003cp\u003eThe moulded plastic body measures approximately 40mm long and provides strain relief at both socket ends, reducing wear on the cable plugs when the coupler is used in semi-permanent installations behind furniture or within wall cavities. The compact form factor allows the join to sit close to walls or within cable management channels without requiring significant clearance space.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 × 2160p (4K)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this support 4K at 60Hz?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe coupler supports 4K resolution up to 3840 x 2160p. Whether it passes 60Hz refresh rate depends on the HDMI version of the cables being joined. The coupler itself is passive and does not limit refresh rate beyond what the connected cables support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with older HDMI cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The coupler is backwards-compatible with all HDMI cable versions (1.4, 2.0, 2.1). The final signal capability is determined by the oldest component in the chain, whether that's the source device, the cables, or the display.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used to join two long HDMI cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHDMI signal degradation increases with cable length. Joining two cables via a passive coupler creates a longer total run, which may result in dropouts or loss of picture quality on runs exceeding 10-15m total length, particularly at 4K resolution. For runs beyond this, an active HDMI repeater or booster is recommended instead of a passive coupler.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313113391371,"sku":"122.403UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122403UK_0.jpg?v=1784889400"},{"product_id":"av-link-scart-to-rca-s-video-switchable-adaptor","title":"AV:Link Scart to RCA \u0026 S-Video Switchable Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link Scart adaptor converts between a 21-pin Scart connector and three RCA phono sockets (composite video yellow, audio left white, audio right red) plus a 4-pin S-Video socket. A slide switch on the body selects whether the adaptor operates as an input (feeding signal from RCA\/S-Video devices into a Scart socket on a TV) or output (feeding signal from a Scart source out to RCA\/S-Video recorders or displays).\u003c\/p\u003e\n\u003cp\u003eDesigned for connecting legacy equipment where one device uses Scart and the other uses RCA composite or S-Video, the adaptor suits VCRs, DVD players, set-top boxes, camcorders and older game consoles to CRT and early flatscreen TVs with Scart inputs. The switch avoids the need for separate input-only and output-only adaptors when connecting multiple devices in different directions.\u003c\/p\u003e\n\u003cp\u003eThe adaptor body measures 57 x 22 x 51mm and weighs 34g, sitting behind the TV or equipment without strain on the Scart socket. The black plastic housing holds all connections on one face, with the Scart plug protruding from the opposite side. When using S-Video, connect to the S-Video socket and leave the yellow RCA composite socket unused. S-Video carries higher-quality separated luminance and chrominance signals than composite.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003eScart, RCA, S-Video\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e57mm x 22mm x 51mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the input\/output switch do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe switch changes the signal direction. Set to 'input' when feeding RCA or S-Video devices into a TV's Scart socket. Set to 'output' when taking a Scart source signal out to RCA or S-Video displays or recorders. The wrong setting will result in no signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use RCA and S-Video at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Use either the three RCA sockets (composite video + stereo audio) or the S-Video socket (video only, requiring separate audio connection). S-Video provides better picture quality than composite when both devices support it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it convert PAL to NTSC or vice versa?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adaptor is a passive connector change only. It does not convert signal standards, resolutions or formats. Both devices must use the same video standard (PAL, NTSC, SECAM) for the signal to display correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with modern HDMI TVs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnly if the TV has a Scart input socket, which is rare on models manufactured after approximately 2010. For HDMI-only TVs you would need an active video converter box rather than this passive adaptor.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313113456907,"sku":"122.410UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122410UK_0.jpg?v=1784889419"},{"product_id":"av-link-hdmi-socket-to-hdmi-micro-plug-adaptor","title":"AV:Link HDMI Socket to HDMI Micro Plug Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link HDMI adaptor connects a standard HDMI cable to devices with HDMI micro ports, providing a full-size Type-A HDMI socket on one end and a Type-D micro HDMI plug on the other. Both ends carry gold-plated contacts to maintain signal integrity across the short 40mm length of the adaptor body.\u003c\/p\u003e\n\u003cp\u003eDesigned for Raspberry Pi single-board computers, compact cameras, camcorders and tablets that ship with micro HDMI outputs, this adaptor removes the need to carry a dedicated micro HDMI cable. It allows any existing standard HDMI cable to be used with micro-equipped devices, making it practical for temporary connections, testing setups and environments where multiple HDMI cables are already in use.\u003c\/p\u003e\n\u003cp\u003eThe compact 40mm body fits directly into the micro HDMI port without additional cable or strain relief, so it works best in situations where the connected HDMI cable is supported separately or where the device is stationary. The 8.5g weight means the adaptor adds minimal load to the micro port itself, though care should still be taken not to use the adaptor as a lever against the port when inserting or removing cables.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.01KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e40mm x 11mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHDMI F to micro M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between HDMI micro and HDMI mini?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHDMI micro (Type-D) is smaller than HDMI mini (Type-C). This adaptor is specifically for micro HDMI ports, which are commonly found on Raspberry Pi 4, action cameras and some tablets. It will not fit HDMI mini ports.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support 4K video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor itself is a passive connector and does not alter the signal. It will pass whatever resolution the source device and cable support, including 4K where both are capable. However, signal quality depends on the total cable length and quality once the adaptor is in place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be left permanently connected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, though the micro HDMI plug is not designed for frequent insertion and removal. If the device will be connected and disconnected regularly, consider using a short micro HDMI cable instead to reduce wear on the device's port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require drivers or software?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adaptor is a passive connector with no active components. It works immediately when inserted, with no configuration needed on the source device or display.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313113522443,"sku":"122.413UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122413UK_0.jpg?v=1784889434"},{"product_id":"av-link-scart-to-hdmi-converter-720p-1080p-usb-powered","title":"AV:Link Scart to HDMI Converter 720p\/1080p - USB Powered","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link Scart to HDMI converter takes analogue video signals from a Scart output and converts them to digital HDMI at either 720p or 1080p resolution, selected via a switch on the unit. The converter accepts PAL, NTSC 3.58\/4.43, SECAM, PAL\/M and PAL\/N input formats, allowing it to work with video equipment from different regions and broadcast standards.\u003c\/p\u003e\n\u003cp\u003eDesigned for connecting older VCRs, DVD players, set-top boxes and games consoles to modern HDMI televisions and monitors, the converter bridges the analogue-to-digital gap without requiring the source device to have component or composite outputs. The unit is powered by USB via the included cable, which can run from a TV's USB port, a mains USB adapter, or a powered USB hub. Maximum supported cable lengths are 8m on the Scart input side and 7m on the HDMI output side before signal degradation becomes a risk.\u003c\/p\u003e\n\u003cp\u003eThe compact 88.5 x 57.5 x 25mm casing sits between devices without occupying significant shelf or cabinet space, and the 60g weight means it can be cable-suspended if the source device sits on a higher shelf. The unit draws a maximum of 350mA at 5V DC during operation, well within the capacity of most TV USB ports rated at 500mA or above. No driver installation or configuration software is needed. Connect the cables, select the output resolution, and the converter begins passing video and audio immediately.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003eScart (PAL, NTSC3\/4, 43 SECAM, PAL\/M, PAL\/N)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003eHDMI (720p, 1080p)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. cable length\u003c\/td\u003e\n\u003ctd\u003eScart input \u0026lt;=8m; HDMI output \u0026lt;=7m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e350mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-10° to 55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower : input\u003c\/td\u003e\n\u003ctd\u003eDC\/5V 1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e88.5mm x 57.5mm x 25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.06KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122416UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it convert audio as well as video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Scart connection carries both video and stereo audio, and both are converted and passed through the HDMI output to the display device.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I power it from the TV's USB port?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost modern TVs provide 500mA or more from their USB ports, which is sufficient for the converter's 350mA maximum draw. If the TV's USB port is rated lower or powers off when the TV is in standby, use a mains USB adapter instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between 720p and 1080p output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e720p outputs at 1280 x 720 resolution, 1080p at 1920 x 1080. The source Scart signal is analogue and lower resolution than either, so the converter upscales the image. Use 1080p if your display is Full HD or above; use 720p for older HD Ready displays or if the image appears over-processed at 1080p.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with NTSC video from non-UK sources?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The converter supports NTSC 3.58, NTSC 4.43, SECAM, PAL\/M and PAL\/N in addition to standard PAL, so it handles video from North American, French and other regional broadcast standards.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313113587979,"sku":"122.416UK","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122416UK_0.jpg?v=1784889449"},{"product_id":"vga-to-hdmi-adapter-with-audio-full-hd-1080p-converter-kit","title":"VGA to HDMI Adapter with Audio - Full HD 1080p Converter Kit","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis VGA to HDMI adapter kit converts analogue VGA video and 3.5mm audio signals into a single HDMI output supporting resolutions up to 1080p Full HD. The kit comprises a VGA male connector, a 3.5mm audio jack input, an HDMI female socket and a micro USB power input, all housed in a compact 260 x 40 x 15mm converter box with a 15cm integrated VGA cable.\u003c\/p\u003e\n\u003cp\u003eDesigned for connecting older laptops, PCs and presentation equipment with VGA output to modern HDMI-compatible displays, projectors and televisions, the adapter requires active power via the included micro USB cable to perform the analogue-to-digital conversion. The VGA side accepts standard 15-pin D-sub connectors carrying RGB video, while the 3.5mm jack input captures stereo audio that is then embedded into the HDMI stream. You will need a separate HDMI cable to connect the adapter's HDMI socket to your display.\u003c\/p\u003e\n\u003cp\u003eThe converter handles standard VGA resolutions including 640x480, 800x600, 1024x768, 1280x720 and 1920x1080, automatically detecting the input resolution and scaling to match the display's native resolution where needed. The micro USB power cable can be powered from a USB port on the source device, a USB mains adapter, or a USB power bank. At 50g total weight, the adapter sits behind a display without strain on the HDMI socket and is suitable for fixed installation or portable presentation use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. resolution\u003c\/td\u003e\n\u003ctd\u003e1080p\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e15cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e260mm x 40mm x 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.05KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adapter require external power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The kit includes a micro USB cable that must be connected to a USB power source (USB port on a PC, USB mains adapter, or power bank) to perform the analogue-to-digital conversion. Without power the adapter will not output a signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cables are included in the kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit includes the converter unit with an integrated 15cm VGA cable and a micro USB power cable. You will need to supply your own HDMI cable to connect from the adapter's HDMI socket to your display, and a 3.5mm audio cable if your source device has a separate audio output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with a MacBook or older laptop?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided your laptop has a VGA output port. Most laptops built before 2012 included VGA output. If your laptop only has HDMI, DisplayPort or USB-C output, this adapter is not suitable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the adapter support audio?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 3.5mm audio input on the converter accepts stereo audio from a headphone or line-out socket, which is then embedded into the HDMI output stream. If your VGA source device has no separate audio output, the HDMI stream will carry video only.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313114898699,"sku":"122.423UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122423UK_0.jpg?v=1784889491"},{"product_id":"av-link-usb-c-to-3-5mm-headphone-jack-adapter-with-built-in-dac","title":"AV:Link USB-C to 3.5mm Headphone Jack Adapter with Built-In DAC","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link USB-C to 3.5mm adapter converts a USB Type-C port on smartphones, tablets and laptops into a standard 3.5mm headphone socket. An integrated DAC (digital-to-analogue converter) chip inside the adapter body processes the digital audio signal from the USB-C port and outputs it as an analogue signal to the 3.5mm jack, allowing conventional wired headphones to work with devices that no longer carry a dedicated headphone socket.\u003c\/p\u003e\n\u003cp\u003eThe adapter suits daily use with modern Android smartphones, tablets, and USB-C equipped laptops where a 3.5mm headphone output has been removed from the hardware. The 140mm total length (including both the USB-C plug and the 3.5mm socket ends) gives enough cable to reach from a device in a pocket or on a desk to headphones worn at ear level without strain on the connection. The adapter weighs 4g and can be coiled or left plugged into headphones when not in use.\u003c\/p\u003e\n\u003cp\u003eThe DAC chip inside the adapter ensures compatibility with a range of USB-C devices that support audio-over-USB-C protocols. Not all USB-C ports output audio. Some USB-C ports are data-only or charge-only. So compatibility depends on whether the source device supports the USB Audio Class standard. The adapter outputs analogue audio, so it works with passive headphones, earbuds and headsets with in-line microphone controls.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e4.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e140mm x 10mm x 8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with all USB-C devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adapter works with USB-C devices that support audio output over USB-C (USB Audio Class standard). Most modern Android smartphones and tablets support this, but some USB-C ports are data-only or charge-only and will not output audio. Check your device specifications before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DAC and why is it needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe DAC (digital-to-analogue converter) chip inside the adapter converts the digital audio signal from the USB-C port into an analogue signal that conventional 3.5mm headphones can use. Without the DAC, passive headphones would not work with a USB-C audio output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with headphones that have in-line controls?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adapter outputs analogue audio, so it supports passive headphones, earbuds and headsets with in-line microphone and playback controls, provided the controls are compatible with your source device.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe total length from USB-C plug to 3.5mm socket is 140mm, with the cable section itself measuring 45mm. This gives enough reach to connect from a device in a pocket or on a desk to headphones at ear level without strain on the connectors.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313115160843,"sku":"122.430UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122430UK_0.jpg?v=1784889540"},{"product_id":"av-link-usb-c-to-hdmi-adaptor-lead-4k-30hz-digital-converter","title":"AV:Link USB-C to HDMI Adaptor Lead - 4K @ 30Hz Digital Converter","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link USB-C to HDMI adaptor lead converts a USB3.1 Type-C output to a female HDMI socket, allowing laptops, tablets and smartphones with USB-C ports to output video and audio to HDMI displays. The adaptor includes a built-in digital-to-analogue converter (DAC) that processes the USB-C signal into HDMI format, supporting resolutions up to 4K @ 30Hz.\u003c\/p\u003e\n\u003cp\u003eDesigned for presentation, home entertainment and remote working scenarios where a USB-C device needs to connect to a projector, monitor or television. The 16.5cm cable gives enough reach to position the HDMI connection away from the device port without adding slack cable to manage. The adaptor is bus-powered from the USB-C port, so no external power supply is needed for typical use cases.\u003c\/p\u003e\n\u003cp\u003eThe compact housing measures 240mm x 12mm x 21mm and weighs 16g, making it portable enough to carry in a laptop bag or presentation kit. The HDMI socket accepts a standard HDMI cable (sold separately) up to HDMI 1.4 specification, which carries both video and audio streams from the source device. Compatibility depends on the source device supporting USB-C DisplayPort Alternate Mode or Thunderbolt 3\/4.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e16.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. resolution\u003c\/td\u003e\n\u003ctd\u003e4K @ 30Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e240mm x 12mm x 21mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.02KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adaptor support audio as well as video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. When connected to a compatible USB-C source device, the adaptor carries both video and audio signals over the HDMI output, allowing sound to play through the connected display or through the display's audio output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat devices is this compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor works with USB-C devices that support DisplayPort Alternate Mode or Thunderbolt 3\/4. This includes most modern laptops, tablets and smartphones with USB-C ports, but compatibility varies by manufacturer. Check your device specifications before purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum resolution supported?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor supports resolutions up to 4K (3840 x 2160 pixels) at 30Hz refresh rate. For higher refresh rates (60Hz or above), a lower resolution such as 1080p may be required depending on the source device and HDMI cable used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this require external power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adaptor draws power from the USB-C port on the source device. For devices with limited power output or when driving very long HDMI cables, an externally powered HDMI adaptor may be required.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313115193611,"sku":"122.431UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122431UK_0.jpg?v=1784889555"},{"product_id":"av-link-usb-3-0-type-c-socket-to-type-a-otg-plug-adaptor","title":"AV:Link USB 3.0 Type-C Socket to Type-A OTG Plug Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link USB 3.0 Type-C to Type-A OTG adaptor converts a USB Type-C plug into a Type-A connection, enabling USB-C devices to connect to standard USB-A ports for data transfer and charging. The adaptor supports USB 3.0 data transfer speeds up to 5Gbps, allowing quick file transfers between smartphones, tablets, laptops and desktop computers fitted with Type-A USB sockets.\u003c\/p\u003e\n\u003cp\u003eDesigned for on-the-go use, the adaptor measures 32 x 14 x 6mm and weighs 4g, making it small enough to carry in a laptop bag or pocket without bulk. The OTG (On-The-Go) specification allows compatible devices to act as either host or peripheral, so a smartphone can read data from a USB flash drive or external hard drive fitted with a Type-A plug when connected via this adaptor. The plug-and-play design requires no drivers on Windows, macOS, Linux or Android systems that support OTG.\u003c\/p\u003e\n\u003cp\u003eThe Type-C socket end accepts any standard USB-C plug, while the Type-A plug end fits any USB-A port including those found on older laptops, desktop PCs, car chargers and power banks. The compact plastic housing protects the internal contacts and provides strain relief where the cable enters each connector. The adaptor works with both USB 3.0 and USB 2.0 ports, automatically negotiating the highest supported speed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData transfer rate\u003c\/td\u003e\n\u003ctd\u003eUp to 5Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e32mm x 14mm x 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adaptor support fast charging?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor passes through the power delivery capabilities of the USB-A port it's connected to. If the Type-A port supports higher current output (e.g. 2.4A or greater), the adaptor will pass that current to the connected USB-C device. It does not support USB-C Power Delivery fast charging protocols, which require a direct Type-C connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with USB-C to USB-C cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This adaptor has a Type-C socket and a Type-A plug, so it's designed to connect a USB-C device (or USB-C cable) to a Type-A port. To connect a USB-C device to another USB-C port, use a direct USB-C to USB-C cable instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat devices support OTG functionality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost modern Android smartphones and tablets support OTG, allowing them to act as a host and read data from USB storage devices, keyboards or other peripherals. Apple iOS devices do not support standard USB OTG. Check your device specifications or settings to confirm OTG support before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with USB 2.0 ports?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adaptor works with both USB 3.0 and USB 2.0 Type-A ports. When connected to a USB 2.0 port, data transfer speeds are limited to 480Mbps (USB 2.0 maximum) rather than the 5Gbps USB 3.0 speed.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313115259147,"sku":"122.433UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122433UK_0.jpg?v=1784889573"},{"product_id":"av-link-usb-3-0-type-a-socket-to-type-c-plug-otg-adaptor","title":"AV:Link USB 3.0 Type-A Socket to Type-C Plug OTG Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link USB 3.0 Type-A to Type-C OTG adaptor converts a USB 3.0 Type-A socket into a USB Type-C plug, supporting data transfer rates up to 5Gbps. The adaptor measures 31 x 15 x 7mm and weighs 4g, making it small enough to keep attached to a cable or in a laptop bag without adding bulk.\u003c\/p\u003e\n\u003cp\u003eDesigned for on-the-go sync and charge applications, the adaptor allows USB-A peripherals (flash drives, keyboards, mice, external hard drives) to connect to devices with USB-C ports such as modern laptops, tablets and smartphones. The plug-and-play operation requires no drivers or software installation on Windows, macOS, Linux or Android systems.\u003c\/p\u003e\n\u003cp\u003eThe USB 3.0 specification supports backward compatibility with USB 2.0 devices, though transfer speeds will be limited to the slower device's maximum rate. The compact form factor means the adaptor sits close to the port without placing twisting stress on the USB-C socket, reducing the risk of port damage compared to longer or heavier adapters.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData transfer rate\u003c\/td\u003e\n\u003ctd\u003eUp to 5Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e31mm x 15mm x 7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adaptor support charging as well as data transfer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adaptor supports both sync and charge applications, allowing USB-A charging cables to connect to USB-C devices. Charging speed depends on the power output of the USB-A source and the device being charged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with USB 2.0 devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The USB 3.0 specification is backward compatible with USB 2.0. If you connect a USB 2.0 device through this adaptor, the transfer speed will be limited to USB 2.0's maximum of 480Mbps rather than the 5Gbps the adaptor supports.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with all USB-C devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor works with any device that has a USB-C port supporting USB 3.0 or USB 2.0 protocols. It does not support video output (DisplayPort Alt Mode) or Thunderbolt protocols.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require drivers or software?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adaptor uses standard USB protocols and works plug-and-play on Windows, macOS, Linux and Android without requiring driver installation.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313115324683,"sku":"122.434UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122434UK_0.jpg?v=1784889589"},{"product_id":"hdmi-to-vga-adapter-cable-with-usb-power-140mm-lead","title":"HDMI to VGA Adapter Cable with USB Power - 140mm Lead","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis AV:Link HDMI to VGA adapter cable converts a digital HDMI output from a laptop, PC or media device into an analogue VGA signal for connection to older monitors, projectors and displays that lack HDMI inputs. The adapter houses a digital-to-analogue converter chip in a compact 45mm housing, with a 140mm HDMI cable on one side and a female VGA socket plus USB power input on the other.\u003c\/p\u003e\n\u003cp\u003eDesigned for conference rooms, classrooms and home offices where newer laptops need to connect to legacy VGA projectors or monitors, the adapter removes the need for a separate converter box. The USB power input draws from a laptop USB port or mains USB charger to power the internal conversion chip, as VGA alone cannot supply power. The gold-plated HDMI connector ensures stable signal transfer from the source device.\u003c\/p\u003e\n\u003cp\u003eThe adapter converts video only. VGA does not carry audio, so a separate 3.5mm audio cable from the source device to external speakers is needed if sound is required. The 140mm HDMI lead gives enough length to route from a laptop HDMI port to the edge of a desk, where the VGA socket accepts a standard male-to-male VGA cable running to the display. The compact housing and short lead length keep cable clutter minimal in portable setups.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e140mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e235mm x 45mm x 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adapter carry audio?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. VGA is a video-only standard and cannot carry audio. If your display has speakers, you will need a separate 3.5mm audio cable from the source device's headphone socket to the display's audio input or to external speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does it need USB power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adapter contains a digital-to-analogue converter chip that requires power to operate. HDMI can output power but VGA cannot, so the USB input draws power from a laptop USB port or mains USB charger to run the conversion circuitry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable connects the VGA socket to the display?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou will need a separate male-to-male VGA cable (not included) to run from the female VGA socket on this adapter to the male VGA input on your monitor or projector. VGA cables are available separately in various lengths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with 4K HDMI sources?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVGA supports a maximum resolution of 1920x1200 at 60Hz. If the HDMI source outputs 4K, the adapter will down-convert the signal to the maximum resolution the VGA display can handle, typically 1080p or lower depending on the monitor.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313116471563,"sku":"122.437UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122437UK_0.jpg?v=1784889605"},{"product_id":"av-link-rca-composite-to-hdmi-upscaler-1080p","title":"AV:Link RCA Composite to HDMI Upscaler - 1080p","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link AV2HDMI is a composite RCA to HDMI upscaler that converts analogue CVBS video and stereo audio into digital HDMI output at either 720p or 1080p resolution. The converter accepts the three-RCA composite connection standard (yellow video, red\/white audio) from older equipment and outputs over a single HDMI cable to modern TVs, monitors and projectors.\u003c\/p\u003e\n\u003cp\u003eDesigned for connecting legacy devices to current displays, the converter suits retro gaming consoles, VCRs, older camcorders, DVD players and set-top boxes that predate HDMI. The resolution switch on the top panel selects between 720p@60Hz and 1080p@60Hz output, allowing the user to match the native resolution of the display or prioritise compatibility over upscaling quality depending on the source material.\u003c\/p\u003e\n\u003cp\u003eThe converter is powered via a mini-USB port on the side panel, drawing 5V DC from any standard USB power adapter, PC USB port, or TV USB service port. The 66 x 55 x 20mm footprint and 35g weight make the unit small enough to sit behind a TV or be cable-tied to the back of a monitor without additional mounting. The unit accepts PAL, NTSC, SECAM and their variants automatically, so no manual switching is needed when changing between region-locked source devices.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connections\u003c\/td\u003e\n\u003ctd\u003eRCA x 3 (CVBS, Audio L\/R)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connection\u003c\/td\u003e\n\u003ctd\u003eHDMI socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo input\u003c\/td\u003e\n\u003ctd\u003ePAL, NTSC3.58, NTSC4.43, SECAM, PAL\/M, PAL\/N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo output\u003c\/td\u003e\n\u003ctd\u003e1080p@60Hz, 720p@60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower : input\u003c\/td\u003e\n\u003ctd\u003eDC\/5V (mini USB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e66mm x 55mm x 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.04KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128511UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this converter work with SCART devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This converter accepts only composite RCA connections (yellow video, red\/white audio). If your device has SCART output, you will need a SCART-to-RCA adapter cable before connecting to this converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between 720p and 1080p output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e720p output is 1280 x 720 pixels; 1080p is 1920 x 1080 pixels. The converter upscales the analogue composite input (typically 576i or 480i) to whichever HD resolution you select. Most modern displays handle both, but some older HD-ready TVs may only support 720p reliably.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a USB power adapter included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA USB power cable (mini-USB) is included. You will need to supply your own USB power adapter, or you can power the converter from a USB port on your TV or a PC.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this improve the picture quality of VHS tapes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe converter upscales the resolution but cannot add detail that is not present in the source. VHS tapes will still show analogue artefacts (noise, tracking lines, colour bleed) but will be displayed at the correct aspect ratio and resolution on a modern HDMI screen.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313142522123,"sku":"128.511UK","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128511UK_0.jpg?v=1784889808"},{"product_id":"av-link-4k-hdmi-digital-audio-extractor-toslink-3-5mm-output","title":"AV:Link 4K HDMI Digital Audio Extractor - Toslink \u0026 3.5mm Output","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 4K HDMI Digital Audio Extractor splits an HDMI signal into separate video and audio outputs, sending the video onwards via HDMI while extracting the audio via either a Toslink optical port or a 3.5mm stereo jack. The device accepts one HDMI input supporting resolutions up to 3840 x 2160 at 30Hz (HDMI 1.4b, HDCP 1.4), passes that video signal through to its HDMI output port, and simultaneously routes the embedded audio to both the Toslink and 3.5mm outputs on the front panel.\u003c\/p\u003e\n\u003cp\u003eDesigned for situations where a display lacks usable audio outputs. Common with projectors, older monitors, and some televisions. The extractor sits inline between the source device (games console, Blu-ray player, streaming box, set-top box) and the display. The Toslink output connects to AV receivers, soundbars or active speakers with optical inputs, while the 3.5mm output handles wired headphones, powered desktop speakers, or analogue stereo amplifiers. Both outputs are live simultaneously, though most users will connect only one at a time.\u003c\/p\u003e\n\u003cp\u003eThe extractor measures 60 x 58 x 22mm and draws power via a micro-USB port on the side panel (cable included, USB mains adapter not included. Any standard 5V USB charger or spare USB port on a TV or console will power the unit). The black metal enclosure has no active cooling and runs silently. Audio formats supported include stereo PCM, DSD and HBR (high bit-rate audio passthrough for formats like Dolby TrueHD and DTS-HD Master Audio when output via Toslink to a compatible receiver).\u003c\/p\u003e\n\u003cp\u003eThe device is plug-and-play with no driver installation or configuration required. HDMI and audio sync is maintained without perceptible delay, making the extractor suitable for gaming where audio lag would disrupt gameplay. Weight is 102g.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connections\u003c\/td\u003e\n\u003ctd\u003eHDMI (4K)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connections\u003c\/td\u003e\n\u003ctd\u003eHDMI (4K), Optical (Toslink), 3.5mm (Stereo)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 x 2160 @ 30Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP version\u003c\/td\u003e\n\u003ctd\u003e1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio output\u003c\/td\u003e\n\u003ctd\u003eStereo, DSD and HD (HBR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower : input\u003c\/td\u003e\n\u003ctd\u003eDC\/5V (micro USB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e60mm x 58mm x 22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.10KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128514UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan both audio outputs be used at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth the Toslink and 3.5mm outputs are active simultaneously. You can connect both a soundbar via Toslink and headphones via 3.5mm if needed, though most setups use only one output at a time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it add audio delay for gaming?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The extractor maintains HDMI and audio sync without perceptible latency, making it suitable for gaming where audio lag would disrupt timing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat powers the unit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe extractor is powered via a micro-USB port on the side. A USB cable is included in the box. You can power it from any standard 5V USB charger, a spare USB port on your TV, games console, or a USB mains adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support 4K at 60Hz?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The maximum supported resolution is 3840 x 2160 at 30Hz (4K UHD at 30Hz). For 4K content at 60Hz you would need a different extractor supporting HDMI 2.0 or higher.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313142784267,"sku":"128.514UK","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128514UK_0.jpg?v=1784889856"},{"product_id":"av-link-4k-hdmi-2-0-repeater-60hz-at-10m","title":"AV:Link 4K HDMI 2.0 Repeater - 60Hz at 10m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 4K HDMI 2.0 repeater is a 50mm inline signal booster that extends HDMI connections beyond standard cable length limits without adding signal degradation. It supports 4K resolution at 60Hz over a combined 10m cable run (5m input + 5m output) or Full HD and 4K@30Hz over 40m (20m input + 20m output), allowing source devices to connect to displays at greater distances than a single HDMI cable can reliably achieve.\u003c\/p\u003e\n\u003cp\u003eDesigned for home cinema installations, commercial AV setups, digital signage and gaming rigs where the display sits more than 5m from the source, the repeater sits inline between two HDMI cables and draws power directly from the HDMI bus, eliminating the need for external power supplies or wall adapters. The unit passes HDCP 2.2 handshake data between source and display, maintaining compatibility with protected 4K streaming content from Netflix, Amazon Prime Video and UHD Blu-ray players.\u003c\/p\u003e\n\u003cp\u003eThe aluminium housing measures 50 x 30 x 18mm and weighs 21g, small enough to tuck behind a wall-mounted TV or inside an AV cabinet without adding visible bulk to the cable run. The repeater supports high-bitrate audio formats including Dolby TrueHD, DTS-HD Master Audio, Dolby AC3 and DSD, passing multi-channel soundtracks to AV receivers and soundbars without downmixing or compression. Maximum bandwidth of 600MHz and 18Gbps aggregate data rate (3 x 6Gbps lanes) ensures compatibility with HDR10, HDR10+ and Dolby Vision metadata where supported by the connected devices.\u003c\/p\u003e\n\u003cp\u003eThe unit operates on the HDMI 2.0b specification and is backward-compatible with HDMI 1.4 and earlier devices, automatically negotiating the highest common resolution and refresh rate between source and display. For maximum distance and signal integrity, pair the repeater with certified high-speed HDMI cables rated for 18Gbps. Lower-quality cables may limit effective distance or introduce handshake failures at 4K@60Hz.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 x 2160P @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD, Dolby True, DTS, Dolby-AC3 and DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP version\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e600MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e3x 6Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e300mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission distance\u003c\/td\u003e\n\u003ctd\u003e10m 4K@60Hz (5m input\/5m output), 40m 4K@30Hz and 1080p (20m input\/20m output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e50mm x 30mm x 18mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.02KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128832UK.pdf?v=1784889962\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this repeater need external power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The repeater draws up to 300mA directly from the HDMI bus, so no external power supply or USB cable is required. It operates purely from the power carried within the HDMI connection itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum distance for 4K at 60Hz?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe repeater supports 4K@60Hz over a combined 10m cable run. Typically 5m from source to repeater and 5m from repeater to display. For longer runs up to 40m combined, resolution drops to 4K@30Hz or Full HD@60Hz depending on the source device output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it\u003c\/strong\u003e\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313143865611,"sku":"128.832UK","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128832UK_0.jpg?v=1784889951"},{"product_id":"av-link-4k-hdmi-extender-over-ethernet-kit-100m","title":"AV:Link 4K HDMI Extender Over Ethernet Kit - 100m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 4K HDMI extender kit transmits HDMI signals up to 100m over a single Cat5e or Cat6 Ethernet cable, replacing bulky HDMI cable runs with standard network cabling. The kit consists of a transmitter unit (TX) and a receiver unit (RX), each measuring 82x45x18mm, with the transmitter connecting to the HDMI source and the receiver connecting to the display or projector. Video resolution supports up to 3840x2160 at 30Hz (4K UHD) using HDMI 1.4a protocol, with HDCP 2.2 compliance for protected content.\u003c\/p\u003e\n\u003cp\u003eDesigned for home cinema, digital signage and commercial AV installations where the source and display are separated by long cable runs, the extender eliminates the signal degradation and cost of 100m HDMI cable. The IR-TX and R\/L ports on the units allow bi-directional infrared control, so a remote control at the display end can operate the source device at the transmitter end without line-of-sight. The 3.5mm stereo output on the receiver extracts audio from the HDMI signal for connection to headphones, powered speakers or an external amplifier, independent of the HDMI output to the display.\u003c\/p\u003e\n\u003cp\u003eBoth units feature ventilation slots on the top surface to dissipate heat during operation, and each is powered by a dedicated 5Vdc 1A power supply (included). The gold-plated HDMI connectors reduce contact oxidation over time, and the units ship with rack-mounting brackets for installation in AV racks or under-desk mounting. The extender supports DTS-HD, Dolby TrueHD, DTS, Dolby AC3 and DSD audio formats, with a maximum bandwidth of 340MHz and baud rate of 3x3.4Gbps. Cat5e or Cat6 shielded twisted pair (STP\/FTP) cable is required for the link and is not supplied with the kit.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI version\u003c\/td\u003e\n\u003ctd\u003e1.4a\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. range\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo format\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 x 2160 @ 30Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eSupports DTS-HD\/Dolby-trueHD\/DTS\/Dolby-AC3\/DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. cable length\u003c\/td\u003e\n\u003ctd\u003eHDMI (input \u0026amp; output) ≤15m AWG26 standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e340MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e3x3.4Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e350mA (TX) and 200mA (RX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e5Vdc, 1000mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e82mm x 45mm x 18mm (each unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.12KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128839UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable type is required for the 100m connection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe extender requires Cat5e or Cat6 shielded twisted pair (STP or FTP) cable between the transmitter and receiver units. Unshielded cable (UTP) is not recommended as it may cause signal interference over long runs. The cable is not included with the kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the IR remote control work in both directions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IR-TX and R\/L ports support bi-directional infrared control, allowing a remote at the display end to control the source device at the transmitter end, or vice versa. IR emitter and receiver cables are required and may be sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I extract audio while still sending HDMI to the display?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 3.5mm stereo output on the receiver unit extracts audio from the HDMI signal simultaneously with the HDMI output to the display. This allows connection to headphones, powered speakers or an external amplifier without interrupting the video signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum resolution supported?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe extender supports resolutions up to 3840x2160 (4K UHD) at 30Hz using HDMI 1.4a. It is HDCP 2.2 compliant for protected content. Higher refresh rates such as 4K at 60Hz are not supported by this model.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313144127755,"sku":"128.839UK","price":58.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128839UK_0.jpg?v=1784890009"},{"product_id":"qtx-dmx-terminator-120-ohms-3-pin-xlr","title":"QTX DMX Terminator 120 Ohms - 3-Pin XLR","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX DMX terminator is a 3-pin XLR plug with a 120-ohm resistor soldered between pins 2 and 3, designed to terminate the end of a DMX512 lighting control chain. The resistor matches the nominal impedance of DMX cable, absorbing the signal at the end of the run and preventing reflected signals from bouncing back down the chain and causing flickering, data errors or addressing conflicts.\u003c\/p\u003e\n\u003cp\u003eDMX lighting systems operate as a single unidirectional data chain from controller to first fixture, first to second, and so on until the last device in the line. Without a terminator, the signal reaching the end of the chain reflects back along the cable, interfering with the outgoing signal and causing intermittent or erratic fixture behaviour, particularly on longer runs or chains with more than 10-15 fixtures. Adding a terminator to the output socket of the final fixture in the chain stabilises the signal across the entire run.\u003c\/p\u003e\n\u003cp\u003eThe QTX terminator plugs directly into any standard 3-pin female XLR socket. It carries no cable or pass-through connection. It is purely an end-of-chain plug. The metal XLR shell provides shielding and strain relief on the resistor connection. For professional touring rigs, venue installations or theatre lighting setups where cable runs exceed 50m or fixture counts go beyond 15 units, a terminator is essential for reliable signal integrity.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e120 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhen is a DMX terminator needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA terminator is required at the end of any DMX512 chain to prevent signal reflection. It is particularly important on runs longer than 50m, chains with more than 15 fixtures, or setups experiencing flickering or intermittent addressing issues.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit 5-pin XLR systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This terminator uses a 3-pin XLR connector and is designed for 3-pin DMX systems. For 5-pin DMX chains, a separate 5-pin terminator is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere does the terminator plug in?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe terminator plugs into the DMX output socket of the final fixture in the chain. It does not pass the signal onwards. It is purely an end-of-line plug to absorb the signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan one terminator be used across multiple setups?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The terminator can be moved between different DMX chains as needed. It is reusable and does not require calibration or configuration for each setup.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313331101963,"sku":"177.924UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/177924UK_0.jpg?v=1784895907"},{"product_id":"av-link-ground-loop-isolator-rca-plugs-to-rca-sockets","title":"AV:Link Ground Loop Isolator RCA Plugs to RCA Sockets","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link ground loop isolator connects between two pieces of audio equipment using RCA plug inputs on one end and RCA socket outputs on the other, breaking the direct earth connection that causes mains hum. A transformer inside the 60cm cable isolates the ground path while allowing the audio signal to pass through, removing the low-frequency buzz that occurs when two devices share different earth potentials.\u003c\/p\u003e\n\u003cp\u003eGround loop hum typically appears when connecting a turntable to an amplifier, a CD player to powered speakers, or AV equipment to a home cinema system where multiple devices are plugged into different mains sockets or extension leads. The isolator sits inline between the source device and the receiving device, with the RCA plugs connecting to the output sockets on the source and the RCA sockets accepting standard RCA plugs from the receiving equipment.\u003c\/p\u003e\n\u003cp\u003eThe 60cm cable length provides enough reach to position the isolator away from tight equipment stacks where physical space is limited, while keeping signal runs short enough to avoid adding additional noise or degradation. Gold-plated RCA connectors resist oxidation and maintain clean contact with both male and female RCA terminals. The red and black colour-coding on the connectors indicates left and right stereo channels.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eGround Loop Isolators\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat causes ground loop hum?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGround loop hum occurs when two audio devices are connected via both an audio cable and separate mains earth paths, creating a loop. Small differences in earth potential between the two mains sockets cause a current to flow through the loop, which manifests as a low-frequency hum (typically 50Hz or 100Hz in the UK) in the audio signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this affect audio quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe transformer isolation adds a very small amount of high-frequency roll-off, typically inaudible in most domestic audio systems. The benefit of eliminating mains hum far outweighs the minimal signal change for the majority of users experiencing ground loop issues.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used with turntables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, but only if the turntable has a built-in phono preamp or you are connecting it through a separate phono stage first. The isolator does not provide RIAA equalisation and should not be placed directly between a turntable cartridge and a phono input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich end connects to which device?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe RCA plug end connects to the output sockets on your source device (CD player, turntable, media player). The RCA socket end accepts standard RCA plugs from the cable running to your amplifier or powered speakers.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313397981451,"sku":"201.086UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/201086UK_0.jpg?v=1784896108"},{"product_id":"av-link-ground-loop-isolator-3-5mm-jack-to-3-5mm-socket","title":"AV:Link Ground Loop Isolator 3.5mm Jack to 3.5mm Socket","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link ground loop isolator is a passive transformer-based device that eliminates mains hum and buzz caused by ground loops between two pieces of audio equipment connected via 3.5mm jack. The isolator sits inline between a source device (phone, laptop, tablet, MP3 player) and an amplifier, powered speaker or car stereo, breaking the ground connection while allowing the audio signal to pass through unaffected.\u003c\/p\u003e\n\u003cp\u003eGround loops occur when two devices share different earth paths in the mains supply, creating a voltage difference that manifests as a 50Hz hum or buzz through the audio system. This is common when connecting a laptop to a home stereo, a phone to a car AUX input, or a tablet to powered speakers while both devices are plugged into mains power. The AV:Link isolator eliminates this hum without requiring any configuration, battery power or external supply. It works entirely passively through audio transformer coupling.\u003c\/p\u003e\n\u003cp\u003eThe 600mm cable length allows the isolator to sit between devices on a desk, in a rack or in a car interior without requiring additional extension cables. The 3.5mm jack plug connects to the output of the source device, and the 3.5mm socket accepts a standard 3.5mm-to-3.5mm cable running to the amplifier or speaker. The compact 60 x 35mm body is CE-certified and housed in a lightweight plastic case that adds minimal bulk to the signal path.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e60mm x 35mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.13KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e600mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat causes ground loop hum and how does this fix it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGround loop hum is a 50Hz buzz caused when two audio devices have different earth potentials in the mains supply, creating a voltage difference that passes through the audio cable. The AV:Link isolator breaks the ground connection using a passive audio transformer, allowing the signal through while blocking the DC voltage difference that causes the hum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need batteries or external power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The isolator is entirely passive and works via transformer coupling. It requires no batteries, no mains power and no configuration. Simply plug it inline and the hum disappears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it affect audio quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTransformer-based isolators can introduce minor high-frequency roll-off and a small reduction in overall level compared to a direct connection. For most consumer audio applications (laptop to speakers, phone to car stereo) the difference is negligible and far preferable to the ground loop hum it eliminates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable do I need to use with it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe isolator has a 3.5mm jack plug on one end and a 3.5mm socket on the other. You need a standard 3.5mm-to-3.5mm cable to run from the isolator's socket to your amplifier or powered speaker. Most users already own this cable.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313398374667,"sku":"201.087UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/201087UK_0.jpg?v=1784896123"},{"product_id":"rj11-6p4c-inline-coupler-socket-to-socket","title":"RJ11 6P4C Inline Coupler Socket to Socket","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link RJ11 6P4C inline coupler joins two RJ11 modular cables using back-to-back female sockets at both ends. The 6P4C configuration (6-position, 4-conductor) carries four active wires through the coupler, making it compatible with standard telephone handset cables, modem cables and basic data connections that use the RJ11 form factor.\u003c\/p\u003e\n\u003cp\u003eDesigned for extending telephone lines, fax connections and legacy modem setups where the existing cable run is too short to reach the wall socket or device, the coupler provides a direct pass-through connection without signal loss. The compact housing sits inline with the cable run and does not require external power or additional wiring. It can be used in residential telephone installations, small office environments and retail point-of-sale systems where landline connectivity is still in use.\u003c\/p\u003e\n\u003cp\u003eThe moulded plastic housing protects the internal conductors and provides strain relief at both socket ends, preventing damage from repeated plugging and unplugging. The coupler accepts standard RJ11 6P4C plugs with the retaining clip facing upwards, and the sockets provide a positive click when a cable is fully seated. Supplied in a sealed retail bag.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eModular (RJ)\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between 6P4C and 6P6C?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e6P4C means six positions but only four conductors are wired (typically the centre four pins). 6P6C wires all six positions. This coupler is 6P4C, so it works with standard telephone handset cables and basic RJ11 connections but will not pass signals on the outer two positions if you plug in a fully-wired 6P6C cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for Ethernet?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Ethernet uses RJ45 8P8C connectors with eight conductors. RJ11 has a smaller plug body and fewer conductors. This coupler is for telephone and legacy modem connections only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with all RJ11 cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt works with any cable that has a standard RJ11 6P4C or 6P6C plug. If the cable uses only the centre four conductors (most telephone cables do), the connection will pass through correctly. If the cable requires all six positions to be active, only the centre four will carry signal.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313398440203,"sku":"283.009UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/283009UK_0.jpg?v=1784896138"},{"product_id":"av-link-usb-c-to-rj45-gigabit-ethernet-adaptor-aluminium","title":"AV:Link USB-C to RJ45 Gigabit Ethernet Adaptor - Aluminium","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link USB-C to RJ45 Gigabit Ethernet adaptor adds a wired network port to laptops, tablets and desktops with USB-C connectivity. The adaptor connects via a 120mm fixed cable with a USB 3.0 Type-C plug on one end and a full-sized RJ45 Ethernet socket on the other, supporting data transfer rates up to 1000Mbps on Gigabit-capable networks.\u003c\/p\u003e\n\u003cp\u003eDesigned for portable use with thin laptops and tablets that lack built-in Ethernet ports, the adaptor provides an alternative to WiFi when working in environments where wired connections are required or preferred for security, stability or bandwidth. The plug-and-play installation works without drivers on Windows, macOS and most Linux distributions, recognising the adaptor as a standard network interface once connected.\u003c\/p\u003e\n\u003cp\u003eThe adaptor body is machined from aluminium with a brushed grey finish, measuring 91mm long and weighing 28g including the attached cable. The compact size suits laptop bags and cable organisers without adding bulk. The RJ45 port accepts standard Ethernet cables with RJ45 plugs and auto-negotiates connection speed between 10Mbps, 100Mbps and 1000Mbps depending on the network infrastructure and cable quality.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eUSB3.0 Type-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eRJ45 Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData transfer rate\u003c\/td\u003e\n\u003ctd\u003e10\/100\/1000Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003e120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e25mm x 91mm x 257mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require drivers or software installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adaptor uses plug-and-play installation on Windows 10\/11, macOS and most Linux distributions. The operating system recognises it as a standard network interface without needing separate driver downloads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat network speeds does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor supports Gigabit Ethernet at 10Mbps, 100Mbps and 1000Mbps. The actual speed depends on the network infrastructure, router capability and Ethernet cable quality. The adaptor auto-negotiates to the highest speed the network supports.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with USB-C ports on all devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor works with USB-C ports that support USB 3.0 data transfer. Some USB-C ports on older devices or charging-only cables may not provide data connectivity. Check that the USB-C port is rated for data before connecting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used while the device is charging?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, if the device has multiple USB-C ports or supports simultaneous charging and data transfer through a single port. The adaptor itself does not pass through power delivery, so a separate charging cable is needed if the device has only one USB-C port.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313445757195,"sku":"500.104UK","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/500104UK_0.jpg?v=1784898474"},{"product_id":"qtx-6-3mm-mono-jack-plug-chromed-metal","title":"QTX 6.3mm Mono Jack Plug - Chromed Metal","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX 6.3mm mono jack plug is a solder-assembly connector with a chromed metal body, designed for building custom instrument cables, speaker leads and patch cables. The plug accepts cables up to 6mm in diameter and uses a spring cable protector that grips the outer jacket to reduce strain on the solder joints.\u003c\/p\u003e\n\u003cp\u003eThe two-terminal mono configuration makes this plug suitable for unbalanced audio connections between guitars, keyboards, amplifiers, mixers and effect pedals. The 6.3mm jack (also called 1\/4-inch) is the standard connector for guitar leads, instrument amplifiers and most professional audio equipment. The chromed metal barrel and tip resist corrosion and wear from repeated plugging and unplugging.\u003c\/p\u003e\n\u003cp\u003eAssembly requires stripping the cable back approximately 15mm, soldering the signal conductor to the tip terminal and the ground to the sleeve terminal, then threading the spring protector over the cable jacket and screwing the barrel onto the connector body. The knurled barrel grip aids tightening without tools. The finished cable handle suits studio builds, live rig maintenance and cable repair where off-the-shelf leads do not provide the exact length or quality needed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e6.3mm (1\/4 Inch jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable diameter does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe plug accepts cables up to 6mm in outer diameter. This covers most standard instrument cables, speaker cables and unbalanced audio leads used in music and PA applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a balanced or unbalanced connector?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a mono (unbalanced) plug with two terminals: tip and sleeve. For balanced connections you need a stereo (TRS) plug with three terminals: tip, ring and sleeve.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat tools are needed for assembly?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou will need a soldering iron, solder, wire strippers and a small flat-blade screwdriver or similar tool to strip the cable jacket back. The barrel tightens by hand using the knurled grip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for speaker cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided the cable gauge and amplifier current rating are compatible. Most guitar amplifier speaker outputs use 6.3mm mono jacks, and this plug is suitable for building speaker leads for those applications.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313472495883,"sku":"750.152UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/750152UK_0.jpg?v=1784898965"},{"product_id":"qtx-gold-plated-6-3mm-mono-jack-plug-aluminium-cover","title":"QTX Gold Plated 6.3mm Mono Jack Plug - Aluminium Cover","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX 6.3mm mono jack plug uses gold-plated contacts inside an aluminium shell with an integrated strain-relief boot. The gold plating on the tip and sleeve contacts resists oxidation and maintains conductivity over repeated insertion cycles, while the aluminium cover provides mechanical protection without adding significant weight to the cable assembly.\u003c\/p\u003e\n\u003cp\u003eDesigned for soldering onto instrument cables, speaker leads and patch cables in live sound, recording and installation contexts, the plug accepts cable outer diameters up to 6mm. The strain-relief boot grips the cable jacket to reduce stress on the solder joints during repeated flexing, extending the working life of custom-built cables. The plug body is threaded to allow the shell to be screwed down once soldering is complete, enclosing the internal connections.\u003c\/p\u003e\n\u003cp\u003eThe mono configuration carries a single audio signal on the tip contact with the sleeve as ground, making it suitable for unbalanced connections between instruments, guitar pedals, amplifiers and PA equipment. The 6.3mm diameter matches the standard quarter-inch jack socket found on most guitar amplifiers, mixing consoles, effects units and professional audio interfaces. The aluminium shell dissipates heat faster than plastic during soldering, reducing the risk of damaging the internal insulator.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e6.3mm (1\/4 Inch jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable diameter does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strain-relief boot accepts cable outer diameters up to 6mm. Thicker cables will not fit through the boot and shell assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for balanced signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a mono (2-pole) jack plug with tip and sleeve contacts only. Balanced connections require a stereo (3-pole) jack with tip, ring and sleeve contacts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the advantage of gold plating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGold resists oxidation better than bare copper or nickel, maintaining low contact resistance over time. This matters most in environments with high humidity or where plugs are inserted and removed frequently.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for speaker connections?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided the amplifier output uses an unbalanced 6.3mm jack socket. Check the amplifier's output impedance and power rating to ensure compatibility with the speaker load.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313472594187,"sku":"750.165UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/750165UK_0.jpg?v=1784898989"},{"product_id":"qtx-heavy-duty-6-3mm-jack-right-angle-mono","title":"QTX Heavy Duty 6.3mm Jack Right Angle Mono","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX heavy duty 6.3mm right-angle mono jack is an all-metal connector for instrument cables, patch leads and audio installations where space constraints require a 90-degree termination. The right-angle head extends horizontally from the cable entry point, allowing the connector to sit flat against a pedalboard, amplifier panel or rack-mounted equipment without placing lateral stress on the cable.\u003c\/p\u003e\n\u003cp\u003eDesigned for guitar, bass, keyboard and synthesiser connections, the connector accepts cable outer diameters up to 8mm and uses a knurled metal barrel for strain relief. The right-angle configuration is particularly useful on pedalboards where straight jacks would project vertically and consume more space, or in tight rack installations where cables need to route parallel to the equipment face. The mono contact configuration carries a single unbalanced signal on the tip and sleeve.\u003c\/p\u003e\n\u003cp\u003eThe metal shell provides screening and mechanical strength for workshop environments, live rigs and studio patch bays where connectors are handled frequently during setup and teardown. The barrel threads onto the body to secure the cable jacket, distributing pull forces across the barrel rather than concentrating them at the solder joints. For technicians building or repairing custom cables, the connector disassembles completely for soldering and reassembly.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e6.3mm (1\/4 Inch jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable diameter does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector accepts cable outer diameters up to 8mm, which covers most standard instrument cable and some thicker patch cable constructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for balanced signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a mono (TS) jack carrying tip and sleeve contacts only. Balanced TRS signals require a stereo jack with an additional ring contact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the right-angle orientation useful?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 90-degree head sits flat against equipment panels, allowing cables to route parallel to pedalboards, amplifier fronts and rack faces without projecting vertically. This saves space and reduces mechanical strain on the cable in tight installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat tool is needed to assemble it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA soldering iron is required to attach the cable conductors to the tip and sleeve contacts. The metal barrel threads onto the body by hand once the cable is soldered.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313472692491,"sku":"750.352UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/750352UK_0.jpg?v=1784899004"},{"product_id":"neutrik-np2x-6-3mm-mono-jack-plug-metal-body","title":"Neutrik NP2X 6.3mm Mono Jack Plug - Metal Body","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Neutrik NP2X is a 6.3mm (quarter-inch) mono jack plug with an all-metal housing and precision-machined contacts. The plug handles tip-sleeve (TS) connections for unbalanced mono audio signals, used across guitars, keyboards, instruments, amplifier inputs, and patch bays in both live and studio environments.\u003c\/p\u003e\n\u003cp\u003eDesigned for repeated plugging and unplugging, the NP2X uses a metal barrel construction that resists impact and cable stress better than moulded plastic alternatives. The internal strain relief clamps onto the cable jacket to prevent the solder joints from taking the mechanical load when cables are pulled or twisted during performance. The contacts are precision-machined to provide consistent grip on the socket sleeve, reducing intermittent crackle and signal dropout common with cheaper plugs.\u003c\/p\u003e\n\u003cp\u003eThe barrel fits cables with outer diameters up to 8mm and accepts a wide range of standard instrument and patch cables. The nickel-plated contacts resist corrosion and maintain low contact resistance over thousands of insertion cycles. The black plastic chuck provides cable entry protection and a comfortable grip for unplugging under stage or studio conditions where visibility is limited.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eNeutrik\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e6.3mm (1\/4 Inch jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eNP2X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable diameter does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NP2X accepts cables with an outer diameter up to 8mm. Most standard instrument cables (6-7mm OD) fit comfortably with room for the strain relief to clamp securely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for balanced signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The NP2X is a two-conductor mono plug (tip and sleeve) for unbalanced signals. For balanced connections use a three-conductor TRS (tip-ring-sleeve) plug or an XLR connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be soldered onto existing cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The NP2X is a solder-type connector requiring basic soldering skills. Strip the cable, solder the conductor to the tip terminal and the screen to the sleeve, then reassemble the barrel and strain relief chuck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes it different from moulded plugs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe all-metal construction and serviceable design mean the NP2X can be repaired if a solder joint fails, rather than replacing the entire cable. The precision contacts also maintain better grip and lower contact resistance than moulded plastic equivalents over time.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313472725259,"sku":"750.735UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/750735UK_0.jpg?v=1784899017"},{"product_id":"neutrik-np3x-6-3mm-stereo-jack-plug-all-metal-construction","title":"Neutrik NP3X 6.3mm Stereo Jack Plug - All-Metal Construction","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Neutrik NP3X is a 6.3mm (1\/4-inch) stereo jack plug with all-metal construction, designed for professional audio connections requiring a three-pole TRS (tip-ring-sleeve) configuration. The body, chuck and contact housing are machined from metal rather than plastic, providing enhanced shielding against RF and electromagnetic interference while maintaining structural integrity under repeated connection cycles.\u003c\/p\u003e\n\u003cp\u003eUsed in studio patching, live sound systems, instrument connections and headphone terminations, the NP3X handles stereo signals, balanced mono signals and insert point connections on mixing consoles and outboard gear. The plug fits standard 6.3mm sockets on amplifiers, mixers, effects units, synthesisers and professional headphones. The metal chuck provides a secure cable grip with integrated strain relief that protects the solder joints and cable conductors from flexing damage during stage use and frequent re-patching.\u003c\/p\u003e\n\u003cp\u003eThe solder terminals inside the plug accommodate cable conductors up to 6mm outer diameter, with clearly marked tip, ring and sleeve contact points for straightforward termination. The plug accepts both shielded stereo cable and balanced cable configurations. Neutrik manufactures the NP3X to Swiss precision engineering standards, with gold-plated contacts that maintain low contact resistance and resist oxidation over time. The metal body threads together with a knurled barrel that can be hand-tightened without tools.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eNeutrik\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e6.3mm (1\/4 Inch jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eNP3X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable diameter does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NP3X accommodates cable outer diameters up to 6mm. The internal chuck and strain relief clamp onto the cable jacket to provide mechanical support and prevent stress on the solder joints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for balanced connections?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The three-pole TRS configuration supports balanced mono signals (tip = hot, ring = cold, sleeve = ground) as well as stereo signals (tip = left, ring = right, sleeve = common ground). The application depends on the connected equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be soldered by hand?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The solder terminals are accessible once the outer barrel is unscrewed from the plug body. The tip, ring and sleeve contacts are clearly marked for straightforward cable termination with a standard soldering iron.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between NP3X and plastic-bodied 6.3mm plugs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe all-metal construction provides better shielding against interference and greater mechanical strength under repeated connection cycles compared to plastic-bodied plugs. The metal barrel also dissipates heat more effectively during soldering.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313472790795,"sku":"751.254UK","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/751254UK_0.jpg?v=1784899032"},{"product_id":"qtx-3-5mm-stereo-jack-plug-chrome-metal-body","title":"QTX 3.5mm Stereo Jack Plug - Chrome Metal Body","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX 3.5mm stereo jack plug features a chrome-plated metal barrel and housing with a spring cable protector at the rear. The plug accepts cables up to 5mm in diameter and provides three solder terminals for tip, ring and sleeve connections in a standard stereo or balanced TRS configuration.\u003c\/p\u003e\n\u003cp\u003eDesigned for custom cable assembly, repairs and upgrades, the plug suits applications including headphone extension cables, audio patch leads between mixers and portable devices, instrument connections and line-level signal runs between studio equipment. The metal construction provides shielding and durability over plastic alternatives, while the spring protector reduces flex fatigue at the cable entry point where repeated plugging cycles would otherwise cause strain.\u003c\/p\u003e\n\u003cp\u003eThe chrome finish resists corrosion and provides a low-resistance contact surface for the tip, ring and sleeve terminals. The plug body is approximately 35mm in length from tip to the rear of the spring protector, with a 6mm diameter barrel that fits standard 3.5mm jack sockets on headphones, mixers, audio interfaces, laptops and mobile devices. Solder connections inside the plug require a clean tip and controlled heat to avoid damaging the internal insulators.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e3.5mm (Mini Jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable diameter does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe rear cable entry accepts cables up to 5mm outer diameter. Smaller cables down to 3mm can also be used, though the spring protector may be looser on narrower cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for balanced TRS connections?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The plug provides three solder terminals for tip, ring and sleeve, allowing it to be wired in stereo unbalanced or balanced TRS configurations depending on the application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat tools are needed to assemble it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAssembly requires a soldering iron with a fine tip, solder, wire strippers and a small amount of heat-shrink tubing if additional strain relief is desired. The plug body unscrews to expose the solder terminals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it provide shielding?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe metal barrel and housing provide electromagnetic shielding when the sleeve terminal is connected to the cable shield. Proper shielding depends on correct soldering and using screened cable.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313472856331,"sku":"752.685UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/752685UK_0.jpg?v=1784899045"},{"product_id":"qtx-3-5mm-stereo-jack-plug-6mm-cable-black-metal-body-gold-contacts","title":"QTX 3.5mm Stereo Jack Cable, Gold Contacts","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX 3.5mm stereo jack plug is a solder-type connector with a black metal body, gold-plated contacts and a threaded housing that accepts cables up to 6mm diameter. The plug provides a tip, ring and sleeve connection for stereo audio signals, commonly used to terminate headphone cables, auxiliary audio leads and patch cables for mixers, amplifiers and consumer electronics.\u003c\/p\u003e\n\u003cp\u003eDesigned for DIY cable assembly and repair work, the threaded housing unscrews to expose the internal contacts for soldering. Once the cable is soldered to the tip (left channel), ring (right channel) and sleeve (ground) contacts, the housing threads back over the cable and contact assembly, providing strain relief at the point where the cable enters the plug. The 6mm cable entry accommodates most standard audio cable outer diameters including shielded twin-core and multi-strand speaker wire.\u003c\/p\u003e\n\u003cp\u003eThe black metal body is lightweight at 10g and measures 46mm from tip to cable entry, with a 12mm diameter housing that fits standard 3.5mm jack sockets. The gold-plated contacts resist oxidation and maintain conductivity over repeated insertion cycles. This is a passive connector with no active components. Signal quality depends on the cable used and the quality of the solder joints made during assembly.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e46mm x 12mm x 12mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.01KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat tools are needed to fit this plug?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou will need a soldering iron (25-40W recommended), solder (rosin-core electronics solder), wire strippers, and a small pair of pliers or a bench vice to hold the plug steady while soldering. A multimeter is useful for checking continuity after assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable diameter does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe threaded housing accepts cables up to 6mm outer diameter. This covers most standard headphone cables, aux leads and shielded audio cables. Thicker cables will not fit through the strain relief housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the contacts pre-tinned?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The gold-plated contacts are not pre-tinned. You will need to tin both the cable ends and the plug contacts with solder before making the final joint to ensure a reliable electrical connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for mono signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. For mono use, solder the signal wire to the tip contact and the ground to the sleeve, leaving the ring contact unconnected. This configuration is common for mono instrument cables and microphone leads using 3.5mm jacks.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313475543307,"sku":"752.687UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/752687UK_0.jpg?v=1784899059"},{"product_id":"qtx-rca-phono-socket-to-6-3mm-mono-jack-plug-adaptor","title":"QTX RCA Phono Socket to 6.3mm Mono Jack Plug Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX RCA phono socket to 6.3mm mono jack plug adaptor converts an RCA phono output to a 6.3mm (1\/4-inch) mono jack input, allowing connection between consumer audio equipment with phono outputs and professional or semi-professional equipment with jack inputs. The adaptor is passive, requiring no power, and handles unbalanced mono audio signals only.\u003c\/p\u003e\n\u003cp\u003eDesigned for patching CD players, mixers, and media players with RCA outputs into PA amplifiers, guitar amps, or mixing consoles with 6.3mm jack inputs, the adaptor suits installations where a short inline conversion is needed without running a full cable. The metal shell and nickel-plated contacts provide a secure connection that resists corrosion and maintains signal integrity over repeated plug\/unplug cycles.\u003c\/p\u003e\n\u003cp\u003eThe adaptor passes the left or right channel of a stereo RCA source as a mono signal when connected to a single phono output. For stereo-to-mono summing or stereo pass-through, two adaptors are required. The compact inline design adds minimal length to the signal path, making it suitable for tight equipment racks and back-of-console patching where space is limited.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e6.3mm (1\/4 Inch Jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adaptor work with stereo signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adaptor carries a mono signal only. If you connect it to one side of a stereo RCA output, it will pass that channel as mono. To handle stereo audio, you need two of these adaptors, one for left and one for right.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the connection balanced or unbalanced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnbalanced. Both RCA phono and 6.3mm mono jack connections are unbalanced by design, so this adaptor does not provide balanced audio or noise rejection over long cable runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used in reverse, from jack to phono?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adaptor is passive and bidirectional, so it can convert a 6.3mm mono jack output into an RCA phono input. Signal flow is determined by which end you plug into the source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat equipment is this suited for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adaptor suits patching consumer audio sources (CD players, media players, turntables with phono outputs) into semi-professional or professional equipment with 6.3mm jack inputs, such as PA amplifiers, mixing consoles, or guitar amplifiers configured for line-level input.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313475772683,"sku":"756.019UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/756019UK_0.jpg?v=1784899073"},{"product_id":"qtx-6-3mm-mono-jack-plug-to-3-5mm-mono-jack-socket-adaptor","title":"QTX 6.3mm Mono Jack Plug to 3.5mm Mono Jack Socket Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX 756.927UK is a 6.3mm mono jack plug to 3.5mm mono jack socket adaptor that converts standard quarter-inch unbalanced mono outputs to accept 3.5mm mini jack inputs. The adaptor features a nickel-plated 6.3mm male plug on one end and a 3.5mm female socket on the other, allowing connection between mismatched audio equipment.\u003c\/p\u003e\n\u003cp\u003eDesigned for mono audio applications including instrument amplifiers, DJ mixers, PA systems and guitar effects pedals, the adaptor suits situations where a 3.5mm source (such as a portable audio player or compact audio interface) needs to connect to a 6.3mm input on amplifiers or mixing desks. The mono configuration carries a single unbalanced audio signal with no left\/right channel separation.\u003c\/p\u003e\n\u003cp\u003eThe compact inline design adds minimal length to the cable run, and the nickel-plated contacts resist oxidation during storage. The adaptor handles line-level and instrument-level signals but is not intended for speaker-level or high-current applications.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e6.3mm (1\/4 Inch Jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between mono and stereo adaptors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMono adaptors carry a single audio channel on one conductor plus ground. Stereo adaptors carry left and right channels on two separate conductors plus ground. This adaptor is mono only and will not pass stereo signals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used with headphones?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnly if the headphones and source are both mono. Using this adaptor with stereo headphones or a stereo source will result in audio playing on one side only, as the adaptor does not combine stereo channels into mono.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for microphones?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor can physically connect a 3.5mm microphone to a 6.3mm input, but check that both the microphone and input use the same impedance and signal type. Dynamic microphones typically work, but powered microphones requiring plug-in power may not be compatible without additional circuitry.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313475838219,"sku":"756.927UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/756927UK_0.jpg?v=1784899087"},{"product_id":"qtx-6-3mm-mono-jack-plug-to-rca-socket-right-angled-adaptor","title":"QTX 6.3mm Mono Jack Plug to RCA Socket Right-Angled Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX right-angled adaptor terminates in a 6.3mm (1\/4 inch) mono jack plug at one end and an RCA phono socket at the other, configured in a 90-degree profile. The right-angled design routes the connected cable parallel to the device face rather than projecting straight out, reducing the overall footprint when space behind equipment racks or near walls is limited.\u003c\/p\u003e\n\u003cp\u003eDesigned for unbalanced mono audio applications, the adaptor allows an RCA-terminated cable to connect to a 6.3mm jack input typically found on guitar amplifiers, mixing desks, DJ controllers and older pro audio equipment. The mono configuration carries a single audio channel, suitable for instrument-level signals and line-level mono sources. The adaptor does not convert stereo to mono or provide any signal processing. It is a passive mechanical connection only.\u003c\/p\u003e\n\u003cp\u003eThe jack plug and RCA socket housing are constructed from metal with gold-plated contacts to reduce oxidation and maintain signal integrity over repeated connections. The compact body measures approximately 35mm in length from the base of the jack plug to the end of the RCA socket housing, keeping the overall projection minimal even when cables are connected. The right-angled orientation is fixed and cannot be rotated once manufactured.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e6.3mm (1\/4 Inch Jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with stereo signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The 6.3mm jack is wired as a mono plug with tip and sleeve only, so it carries a single audio channel. If you connect a stereo RCA source, only one channel will pass through the adaptor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich direction does the cable exit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe right-angled design routes the RCA cable at 90 degrees to the jack plug axis. When the jack is inserted into a front-facing socket, the RCA cable exits parallel to the device face, running to the left or right depending on the orientation of the adaptor body.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for balanced audio?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The mono jack configuration is unbalanced (tip = signal, sleeve = ground). Balanced audio requires a TRS (tip-ring-sleeve) jack or XLR connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used with instrument cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided the instrument cable terminates in an RCA plug. The adaptor passes the unbalanced instrument-level signal from the RCA input to the 6.3mm jack output without amplification or attenuation.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313476198667,"sku":"757.025UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/757025UK_0.jpg?v=1784899103"},{"product_id":"qtx-6-3mm-mono-jack-plug-to-rca-socket-adaptor","title":"QTX 6.3mm Mono Jack Plug to RCA Socket Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX 6.3mm mono jack plug to RCA socket adaptor converts a 6.35mm (quarter-inch) mono jack plug connection into an RCA phono socket, allowing unbalanced mono audio signals to pass between consumer and professional equipment. The jack plug terminates in a single-conductor mono configuration, while the RCA socket accepts a standard phono plug from CD players, cassette decks, DJ mixers and similar RCA-output devices.\u003c\/p\u003e\n\u003cp\u003eCommonly used in studios and live sound setups where RCA-output sources need to feed into mixers, amplifiers or recording interfaces with jack inputs, the adaptor eliminates the need for separate conversion cables. The compact in-line design adds minimal projection to the connection point, making it suitable for tight rear-panel installations or crowded patch bays. The metal body provides mechanical strength and helps screen the connection from RF interference in dense equipment racks.\u003c\/p\u003e\n\u003cp\u003eThe 6.3mm jack plug and RCA socket are both nickel-plated for corrosion resistance and consistent contact. The mono configuration means the adaptor carries a single audio channel rather than stereo, so it's used for instrument outputs, mono effects sends, or summing stereo-to-mono where appropriate. The adaptor weighs approximately 10g and measures around 40mm from plug tip to socket rear, allowing it to be left permanently connected to frequently-used cables without adding significant bulk.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e6.3mm (1\/4 Inch Jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this adaptor mono or stereo?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a mono adaptor. It carries a single audio channel through the 6.3mm jack plug tip and RCA socket centre pin. It does not carry stereo signals and should not be used where left and right channels need to be preserved separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat equipment is this typically used with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCommon uses include connecting RCA-output sources like CD players, tape decks or DJ equipment to mixers and amplifiers with 6.3mm jack inputs, or adapting mono instrument cables to interface with RCA-based recording devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with balanced signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is an unbalanced mono adaptor. Balanced signals require a TRS (tip-ring-sleeve) jack and different wiring. Using this adaptor in a balanced signal path will result in signal loss or incorrect operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this to convert stereo RCA to a single jack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePhysically yes, but it will only pass one channel of the stereo signal. If you need to preserve both left and right channels, you need either two mono adaptors (one per channel) or a dedicated stereo RCA-to-dual-jack solution.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313476329739,"sku":"757.141UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/757141UK_0.jpg?v=1784899113"},{"product_id":"qtx-6-3mm-stereo-jack-plug-to-3-5mm-socket-adaptor","title":"QTX 6.3mm Stereo Jack Plug to 3.5mm Socket Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX adaptor converts a 6.3mm (1\/4-inch) stereo jack plug into a 3.5mm (mini-jack) socket, allowing consumer headphones and cables to connect to professional audio equipment. The adaptor accepts a 3.5mm plug on one end and terminates in a 6.3mm stereo jack plug on the other, maintaining stereo signal path throughout.\u003c\/p\u003e\n\u003cp\u003eDesigned for connecting consumer headphones to mixing desks, studio monitors, DJ controllers and guitar amps, the adaptor suits both home studio and live audio applications where the output is 6.3mm but the headphones or device cable is 3.5mm. The compact metal body adds minimal length to the cable run and the secure fit resists loosening during use.\u003c\/p\u003e\n\u003cp\u003eThe adaptor handles both balanced mono and unbalanced stereo signals, making it compatible with most consumer and pro audio configurations. The metal body provides strain relief at the connection point and resists wear from repeated insertion and removal. The compact form factor allows the adaptor to be used in tight equipment racks and rear-panel connections without blocking adjacent sockets.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e6.3mm (1\/4 Inch Jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat signal types does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor passes both balanced mono and unbalanced stereo signals. Most consumer headphones use unbalanced stereo, which is compatible with this adaptor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with my headphones?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your headphones have a 3.5mm plug and you need to connect them to a 6.3mm output on a mixing desk, amp or audio interface, this adaptor will work. It does not convert impedance or alter the signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for instrument cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adaptor can be used to connect a 3.5mm cable to a 6.3mm input, though most instrument applications use 6.3mm on both ends. Common use cases include connecting portable audio devices to PA systems or studio monitors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the build quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe metal body resists physical wear and provides strain relief at the connection point. The compact design adds approximately 30mm to the cable length once fitted.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313476362507,"sku":"757.873UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/757873UK_0.jpg?v=1784899128"},{"product_id":"qtx-6-3mm-jack-plug-to-3-5mm-stereo-socket-adaptor","title":"QTX 6.3mm Jack Plug to 3.5mm Stereo Socket Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX 6.3mm to 3.5mm stereo adaptor converts a standard quarter-inch jack plug (6.3mm) down to a 3.5mm stereo socket, allowing consumer audio devices with 3.5mm outputs to connect into professional equipment with 6.3mm inputs. The metal-bodied construction provides mechanical strength at the connection point, where cheaper plastic adaptors tend to fail under repeated insertion and removal.\u003c\/p\u003e\n\u003cp\u003eCommon uses include adapting 3.5mm headphone outputs from laptops, phones or tablets into 6.3mm headphone sockets on mixing consoles, studio monitors, DJ controllers and guitar amplifiers. The adaptor also works in reverse, allowing 6.3mm headphone plugs to connect into 3.5mm sockets on portable recorders, computers or audio interfaces that only provide mini-jack outputs. The stereo configuration passes both left and right channels through the adaptor without signal loss.\u003c\/p\u003e\n\u003cp\u003eThe compact 25mm length means the adaptor sits flush against equipment panels without protruding significantly, reducing the risk of lever damage if a cable is knocked or pulled. The nickel-plated metal barrel resists corrosion and maintains conductivity over time, while the knurled grip section allows the adaptor to be removed by hand without needing pliers. At approximately 8g, it adds minimal weight to a cable run or equipment bag.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e6.3mm (1\/4 Inch Jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adaptor work with balanced signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a stereo adaptor designed for unbalanced stereo connections (tip-ring-sleeve carrying left, right and ground). It will physically connect to balanced equipment using TRS jacks, but the signal will not be balanced and may pick up noise over longer cable runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this to connect a microphone?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can physically connect a 3.5mm microphone plug into the adaptor and then into a 6.3mm input, but the adaptor does not provide phantom power or impedance matching. It works for line-level signals and passive dynamic microphones, but condenser microphones needing phantom power require a dedicated mic preamp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this reduce audio quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor itself introduces negligible signal loss when the connections are clean and tight. Audio quality depends more on the quality of the cables and equipment being connected. A well-made adaptor like this QTX model maintains the signal integrity of the source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it durable enough for live use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe metal construction and nickel plating make it suitable for regular studio and live use. The main wear point is the internal spring contact in the socket, which can loosen over hundreds of insertions, but for typical DJ, musician and home studio use the adaptor should last several years of regular handling.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313476559115,"sku":"757.882UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/757882UK_1.jpg?v=1784899144"},{"product_id":"qtx-6-3mm-stereo-jack-plug-to-3-5mm-stereo-jack-socket-adaptor","title":"QTX 6.3mm Stereo Jack Plug to 3.5mm Stereo Jack Socket Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX 6.3mm to 3.5mm stereo jack adaptor converts a 6.3mm (quarter-inch) stereo jack plug to a 3.5mm (mini-jack) stereo socket, allowing professional audio equipment to connect with consumer devices that use smaller connectors. The adaptor carries stereo signals and works equally well with balanced mono connections.\u003c\/p\u003e\n\u003cp\u003eDesigned for connecting studio headphones, amplifiers, mixing consoles and DJ equipment to laptops, smartphones, portable recorders and consumer headphone outputs, the adaptor handles both live and studio environments. The gold-plated contacts reduce oxidation and provide reliable signal transfer between equipment formats, avoiding the need for adapter cables or replacing existing leads.\u003c\/p\u003e\n\u003cp\u003eThe compact metal body measures approximately 35mm in length and adds minimal extension to the connection point, making it suitable for rear-panel use on mixers and amplifiers where space is limited. The knurled grip at the plug end allows finger-tight fitting and removal without needing pliers. The socket accepts standard 3.5mm TRS plugs from headphones, patch cables and consumer audio gear.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e6.3mm (1\/4 Inch Jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with stereo headphones?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adaptor carries stereo signals from a 6.3mm stereo source to a 3.5mm stereo headphone plug. Both channels pass through the TRS (tip-ring-sleeve) configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used with balanced mono equipment?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adaptor works with balanced mono signals where tip and ring carry the positive and negative legs of a balanced connection, with sleeve as ground. The same TRS wiring supports both balanced mono and unbalanced stereo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for instrument cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot for standard instrument cables. Guitar and bass cables typically use unbalanced mono (TS) connections, not stereo (TRS). Using this adaptor with an unbalanced mono source may result in one channel being grounded.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the build quality like?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor uses a metal shell with gold-plated contacts. The compact size and knurled grip make it suitable for repeated connection and disconnection in studio and live environments without thread wear.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313476591883,"sku":"757.888UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/757888UK_0.jpg?v=1784899161"},{"product_id":"qtx-6-3mm-right-angle-stereo-jack-plug-to-socket-adaptor","title":"QTX 6.3mm Right-Angle Stereo Jack Plug to Socket Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX 6.3mm right-angle stereo jack adaptor converts a standard 6.3mm stereo jack plug into a 6.3mm stereo jack socket, with the plug connector positioned at 90 degrees to the body. The right-angle configuration reduces cable strain where a straight connector would protrude too far from the jack, particularly in pedalboards, rack-mounted equipment and amplifier back panels where space behind the connector is limited.\u003c\/p\u003e\n\u003cp\u003eDesigned for both balanced mono and unbalanced stereo audio signals, the adaptor suits instrument cables, headphone extensions, and line-level audio connections in studios, live stages and home audio setups. The right-angle plug positions the cable run parallel to the mounting surface rather than perpendicular, which helps in tight rack enclosures and behind furniture where a straight plug would force the cable into a sharp bend or prevent the equipment from sitting flush against a wall.\u003c\/p\u003e\n\u003cp\u003eThe adaptor body is metal with a black finish, providing mechanical durability under repeated connection and disconnection cycles. The jack socket accepts standard 6.3mm stereo plugs and maintains contact integrity across the tip, ring and sleeve conductors. At approximately 35mm in length from the base of the right-angle plug to the end of the socket housing, the adaptor adds minimal bulk to a signal chain while solving clearance and strain-relief problems in constrained installations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e6.3mm (1\/4 Inch Jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this adaptor suitable for balanced audio?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The three-conductor design (tip, ring, sleeve) supports both balanced mono and unbalanced stereo signals. For balanced mono, the tip and ring carry the positive and negative signal phases, with the sleeve as ground.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the advantage of the right-angle connector?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe right-angle plug positions the cable run parallel to the mounting surface, reducing the projection depth behind the connector. This is useful in pedalboards where space between pedals is tight, in rack units where cables need to route neatly, and in amplifier setups where a straight plug would force the cable into a sharp bend or prevent the amp from sitting flush against a wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with instrument cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Standard 6.3mm instrument cables with stereo or mono plugs will fit the socket end. However, note that most instrument cables are mono (two-conductor), so only the tip and sleeve contacts will be used in that case.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used with headphones?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. If you have headphones with a 6.3mm stereo plug and need to extend the cable or change the angle of connection, this adaptor will work. The stereo signal (left channel on tip, right channel on ring, common ground on sleeve) passes through all three conductors.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313476657419,"sku":"758.334UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/758334UK_0.jpg?v=1784899174"},{"product_id":"qtx-6-3mm-stereo-jack-socket-to-socket-coupler","title":"QTX 6.3mm Stereo Jack Socket to Socket Coupler","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX 6.3mm stereo jack coupler is an inline connector with female 6.3mm stereo jack sockets on both ends, designed to join two existing 6.3mm jack cables together when additional cable length is needed. The coupler passes three-pole stereo signals or balanced mono signals between cables without re-soldering or replacing entire cable runs.\u003c\/p\u003e\n\u003cp\u003eUsed primarily in studio, rehearsal and live sound environments where microphones, instruments, headphones or line-level gear need extending beyond the length of a single cable. The inline design means the coupler sits between two cables rather than requiring a separate adaptor box, keeping signal paths short and reducing points of potential interference. The metal-bodied construction provides screening against RF noise and a secure threaded connection that resists accidental disconnection under stage or studio handling.\u003c\/p\u003e\n\u003cp\u003eThe 6.3mm stereo jack (also known as 1\/4-inch TRS) is the standard professional audio connector for balanced mono microphone and line signals, and unbalanced stereo headphone signals. The QTX coupler accommodates both wiring schemes, making it compatible with the majority of professional audio cables in the UK and European markets. The compact 35mm length and 12mm diameter mean the coupler adds minimal bulk to a cable run and fits comfortably in a cable bag or tool case.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e6.3mm (1\/4 Inch Jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with both balanced and unbalanced signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The three-pole socket configuration supports balanced mono (tip-ring-sleeve wired as positive, negative, ground) and unbalanced stereo (tip-ring-sleeve wired as left, right, ground). The coupler does not alter the signal, so the cable's own wiring determines whether the signal is balanced or stereo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit mono 6.3mm jacks?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA two-pole mono 6.3mm jack plug will physically insert into the coupler and make contact with tip and sleeve, but the ring connection will be unused. For mono-to-mono extension, a dedicated mono coupler avoids unused contacts, though this stereo version will function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum cable length I can extend to?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePractical limits depend on the cable type and signal level. For line-level balanced signals, total cable runs of 50-100m are common without noticeable degradation. For instrument-level unbalanced signals (guitars, bass), runs above 10m may pick up noise or lose high frequencies depending on cable capacitance. The coupler itself does not degrade the signal, but longer total cable lengths increase susceptibility to interference and capacitive loss.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313476854027,"sku":"758.361UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/758361UK_0.jpg?v=1784899188"},{"product_id":"qtx-3-5mm-stereo-jack-plug-to-6-3mm-stereo-socket-adaptor","title":"QTX 3.5mm Stereo Jack Plug to 6.3mm Stereo Socket Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX adaptor converts a 3.5mm stereo jack plug to a 6.3mm stereo socket, allowing devices with a mini jack output to connect to equipment fitted with quarter-inch inputs. The adaptor carries three contacts. Left channel, right channel, and common ground. Making it suitable for stereo headphones, unbalanced stereo line signals, and balanced mono connections.\u003c\/p\u003e\n\u003cp\u003eDesigned for studio monitoring, DJ headphones, home audio systems and stage playback, the adaptor allows 3.5mm headphones to plug into mixing desks, audio interfaces, studio headphone amplifiers and professional PA equipment that use 6.3mm headphone outputs. It can also be used to connect portable audio devices with 3.5mm outputs to mixers, amplifiers or recording equipment with 6.3mm line inputs.\u003c\/p\u003e\n\u003cp\u003eThe body is compact at approximately 40mm in length, with a metal 3.5mm plug and a 6.3mm socket housing. The metal construction provides shielding against interference and maintains contact integrity under repeated insertion cycles. The adaptor adds minimal bulk to the cable connection, making it practical for touring kits, desktop monitoring setups and installed audio systems where the adaptor remains semi-permanently fitted.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e3.5mm (Mini Jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with stereo headphones?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adaptor carries stereo signals, so headphones with a 3.5mm plug will work in full stereo when plugged into a 6.3mm headphone output via this adaptor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for balanced mono signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The three-contact configuration supports balanced mono signals where tip and ring carry the positive and negative phases of a balanced signal, with the sleeve as ground.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it carry microphone or line level signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor is passive and does not alter signal level or impedance. It will pass whatever signal is present on the plug side to the socket side, whether that is headphone level, line level or mic level. It does not provide phantom power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the body metal or plastic?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe plug and socket housings are metal, providing shielding and durability. The body may include a plastic grip section for handling during insertion and removal.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313476919563,"sku":"759.002UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/759002UK_0.jpg?v=1784899203"},{"product_id":"qtx-3-5mm-to-6-3mm-stereo-jack-adaptor","title":"QTX 3.5mm to 6.3mm Stereo Jack Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX stereo jack adaptor converts a 3.5mm stereo plug to a 6.3mm stereo socket, allowing smaller consumer devices to connect to professional audio equipment that uses the larger quarter-inch jack standard. The adaptor handles stereo signals across both channels and can also be used with balanced mono connections where both tip and ring carry signal.\u003c\/p\u003e\n\u003cp\u003eDesigned for studio monitors, headphone amplifiers, mixing consoles and DJ controllers, the adaptor bridges the gap between consumer headphones with 3.5mm terminations and professional gear with 6.3mm inputs. Typical uses include connecting smartphone or laptop audio to a monitor controller, pairing consumer headphones with a studio headphone amp, or linking portable devices to PA mixers and live sound desks.\u003c\/p\u003e\n\u003cp\u003eThe metal barrel provides strain relief at the connection point and shields the signal path from RF interference. Gold-plated contacts maintain low resistance across the connection and resist oxidation over repeated insertions. The knurled grip section allows the adaptor to be hand-tightened or removed without needing pliers, and the compact 30mm length means it can be left in place on equipment without obstructing adjacent sockets.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e3.5mm (Mini Jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with balanced signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor passes stereo signals (tip and ring as left\/right channels) and can also be used with balanced mono connections where tip and ring carry positive and negative signal phases. It does not convert unbalanced to balanced or vice versa.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit recessed sockets?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 30mm barrel length and cylindrical profile allow the adaptor to fit most recessed panel-mount sockets, but clearance depends on the specific socket housing. Measure the recess depth if clearance is critical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I leave it plugged in permanently?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The metal construction and gold-plated contacts handle permanent installation without degradation. Many users leave the adaptor in place on equipment that regularly interfaces with 3.5mm devices.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313476952331,"sku":"759.013UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/759013UK_0.jpg?v=1784899217"},{"product_id":"qtx-3-5mm-stereo-jack-plug-to-6-3mm-mono-jack-socket-adaptor","title":"QTX 3.5mm Stereo Jack Plug to 6.3mm Mono Jack Socket Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis QTX adaptor converts a 3.5mm stereo jack plug to a 6.3mm mono jack socket, summing the left and right stereo channels into a single mono output. The adaptor has a metal barrel with ribbed grip detailing and nickel-plated contacts on both the 3.5mm plug and the 6.3mm socket.\u003c\/p\u003e\n\u003cp\u003eUsed where audio equipment outputs a stereo signal on a 3.5mm connection but the receiving device requires a mono input on a 6.3mm jack, such as connecting a smartphone or laptop to PA systems, guitar amplifiers, or mixing desks that expect a mono input. The summing process combines both stereo channels equally, preventing loss of content that would occur if only the left or right channel were passed through.\u003c\/p\u003e\n\u003cp\u003eThe metal construction provides durability under regular connection and disconnection cycles, and the ribbed grip makes it easier to remove from tight sockets without pulling on cables. The adaptor is a passive component requiring no power, and introduces no signal processing beyond the summing of stereo to mono.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e3.5mm (Mini Jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adaptor sum stereo to mono or just pass one channel?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt sums both left and right stereo channels into a single mono output, so content panned to either channel in the stereo mix will be present in the mono output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in reverse, from mono 6.3mm to stereo 3.5mm?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePhysically the adaptor will connect in reverse, but the mono input will only feed one channel of a stereo output, not create a true stereo signal from a mono source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable length or weight can the adaptor support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe metal barrel provides structural support for typical 3.5mm cables. Heavier or longer cables may benefit from strain relief at the connection point to avoid repeated stress on the socket.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313477116171,"sku":"759.185UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/759185UK_0.jpg?v=1784899230"},{"product_id":"3-5mm-stereo-jack-plug-to-2x-3-5mm-jack-socket-splitter-adaptor","title":"3.5mm Stereo Jack Plug to 2x 3.5mm Jack Socket Splitter Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis QTX splitter adaptor takes one 3.5mm stereo jack plug input and splits it to two 3.5mm stereo jack socket outputs, allowing a single audio source to feed two separate devices simultaneously. The plug end connects to the headphone or line output on a phone, tablet, laptop or audio player, while the two socket ends accept standard 3.5mm headphone cables or auxiliary leads.\u003c\/p\u003e\n\u003cp\u003eDesigned for sharing audio between two listeners without needing a separate amplifier or Bluetooth pairing, the adaptor suits scenarios where two people want to watch a film on a tablet together, share music from a phone during travel, or monitor the same audio feed from a mixer or recorder. The passive split means both outputs receive the same stereo signal at equal volume, controlled by the source device's output level.\u003c\/p\u003e\n\u003cp\u003eThe metal-bodied construction with strain relief on the cable end provides durability over repeated plugging and unplugging. The compact form factor adds minimal bulk to a pocket or equipment case. Note that splitting a stereo signal passively can reduce overall volume slightly compared to a single direct connection, depending on the impedance of the connected headphones or speakers.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e3.5mm (Mini Jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with both headphones and speakers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adaptor accepts any device with a 3.5mm stereo jack input, including headphones, earphones, powered speakers and auxiliary leads to car stereos or home audio systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the volume be lower when using two outputs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSplitting a signal passively can reduce the volume slightly compared to a single direct connection, depending on the impedance of the connected devices. Most modern phones and tablets have enough output power to drive two standard headphones at usable listening levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this to split microphone signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adaptor is designed for line-level and headphone-level stereo audio signals. It is not suitable for splitting microphone-level signals or mixing two inputs into one output.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313477181707,"sku":"759.307UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/759307UK_0.jpg?v=1784899243"},{"product_id":"qtx-3-5mm-stereo-jack-plug-to-2-rca-phono-socket-adaptor","title":"QTX 3.5mm Stereo Jack Plug to 2 RCA Phono Socket Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX 3.5mm stereo jack to dual RCA phono socket adaptor converts a single 3.5mm stereo jack plug into two separate RCA phono sockets, splitting the left and right channels of a stereo signal into discrete outputs. The 3.5mm plug fits standard headphone outputs on laptops, tablets, MP3 players and portable audio devices, while the two RCA sockets accept standard phono plugs from amplifier, mixer and active speaker cables.\u003c\/p\u003e\n\u003cp\u003eDesigned for connecting consumer audio sources to professional or domestic hi-fi equipment, the adaptor allows a smartphone or laptop headphone output to feed a stereo amplifier, powered speakers or a DJ mixer without needing a dedicated cable. The compact housing sits close to the source device, minimising strain on the 3.5mm socket, and the metal phono socket bodies provide a secure grip on standard phono plugs.\u003c\/p\u003e\n\u003cp\u003eThe adaptor passes analogue stereo signals only and does not amplify or convert the signal. Output volume and quality depend on the source device's headphone output. The black moulded housing measures approximately 40mm in length including the 3.5mm plug, with the two RCA sockets positioned side by side on the opposite end. No external power is required.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e3.5mm (Mini Jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich RCA socket is left and which is right?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe RCA sockets follow standard colour coding where available, but check the adaptor body or the source device's manual to confirm channel assignment if critical. Most adaptors mark the sockets or colour-code them red (right) and white (left).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used to connect a turntable to a laptop?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This adaptor is an output adaptor, designed to send a signal from a 3.5mm headphone output to RCA inputs. It does not work in reverse, and turntables require a phono preamp stage before connecting to a laptop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it affect sound quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor is a passive connector with no active components, so it does not degrade the signal beyond the inherent limitations of the 3.5mm headphone output on the source device. Sound quality depends on the source's DAC and headphone amplifier circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with balanced or digital signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adaptor is designed for analogue stereo signals only. It will not pass digital audio or balanced signals.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313477247243,"sku":"759.490UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/759490UK_0.jpg?v=1784899255"},{"product_id":"qtx-3-5mm-stereo-jack-coupler-female-to-female","title":"QTX 3.5mm Stereo Jack Coupler - Female to Female","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX 3.5mm stereo jack coupler is a back-to-back inline adaptor with female 3.5mm sockets at both ends, designed to join two 3.5mm male jack cables together. The coupler passes three-conductor (TRS) signals, making it suitable for both unbalanced stereo audio connections and balanced mono signals where left and right channels carry signal and return on a common ground.\u003c\/p\u003e\n\u003cp\u003eCommonly used to extend headphone cables, link portable audio devices to speakers, or patch studio monitoring setups where the existing cable run is too short. The coupler maintains the stereo signal path without requiring soldering or rewiring, and the compact inline design minimises the physical footprint of the join. Both sockets are wired identically, so the coupler has no directional orientation.\u003c\/p\u003e\n\u003cp\u003eThe metal body provides mechanical strength at the join point and shields the connection from RF interference. The coupler sits flush when two 3.5mm male plugs are inserted, with no exposed connectors or loose housing. QTX manufactures the coupler to standard 3.5mm TRS dimensions, ensuring compatibility with consumer headphones, portable audio players, mixing desks, and most studio monitoring equipment using 3.5mm connectivity.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e3.5mm (Mini Jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with stereo headphones?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The coupler passes all three conductors (left, right, ground) so it maintains stereo signal when joining two stereo 3.5mm cables. It works with standard consumer headphone cables, auxiliary audio cables, and TRS patch leads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for balanced mono audio?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Balanced mono signals use the same three-conductor TRS configuration as unbalanced stereo, with tip and ring carrying the positive and negative signal phases on a common sleeve ground. The coupler passes this configuration without modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between this and a mono coupler?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA mono coupler typically uses two-conductor (TS) wiring and only passes tip and sleeve. This stereo coupler uses three-conductor (TRS) wiring and passes tip, ring and sleeve, making it compatible with stereo and balanced mono signals. Using a mono coupler on a stereo cable results in loss of one channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it degrade audio quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe coupler introduces a physical join point, which adds a small amount of contact resistance compared to a continuous cable. For typical consumer audio and short to medium cable runs, this is negligible. For professional studio use over long cable runs or high-impedance sources, a soldered join or purpose-made extended cable may be preferred.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313477411083,"sku":"759.613UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/759613UK_0.jpg?v=1784899266"},{"product_id":"av-link-rca-socket-to-rca-socket-coupler-adaptor","title":"AV:Link RCA Socket to RCA Socket Coupler Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link RCA socket to RCA socket coupler is a back-to-back inline adaptor with female RCA phono sockets at both ends, allowing two male-terminated RCA cables to be joined together to extend cable runs. The centre pin and outer shield maintain full contact through the adaptor body, preserving signal integrity for composite video and unbalanced audio connections.\u003c\/p\u003e\n\u003cp\u003eCommonly used when an existing RCA cable is too short to reach between a DVD player and TV, between a games console and AV receiver, or when extending turntable audio cables in a hi-fi setup. The coupler works equally well for composite video (yellow RCA), stereo audio (red\/white RCA), or mono audio connections. The compact barrel design sits inline without adding bulk to the cable run.\u003c\/p\u003e\n\u003cp\u003eThe outer body is moulded black plastic with polished metal RCA sockets at each end. The sockets grip standard RCA plugs firmly enough to prevent accidental disconnection but release cleanly when pulled. Because the adaptor is passive (no internal circuitry), it introduces no signal loss beyond the marginal resistance of the additional contact points, making it suitable for runs up to several metres without degradation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRCA (Phono)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work for both audio and video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The coupler is electrically identical for composite video (typically yellow RCA cables) and unbalanced audio (red\/white RCA). It carries the signal between the two cable sections without filtering or modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it degrade the signal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor is passive and introduces only the marginal resistance of the additional contact points. For typical home AV runs (under 5-10m total cable length after joining), signal degradation is negligible. Very long runs or professional-grade installations may benefit from direct cabling without intermediate adaptors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for subwoofer connections?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Subwoofer LFE connections typically use RCA cables, so this adaptor will extend a subwoofer cable run if needed. The low-frequency signals carried by subwoofer connections are not affected by the inline join.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313477640459,"sku":"761.260UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/761260UK_0.jpg?v=1784899279"},{"product_id":"neutrik-nc3mxx-3-pole-xlr-male-line-plug-nickel-shell","title":"Neutrik NC3MXX 3-Pole XLR Male Line Plug - Nickel Shell","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Neutrik NC3MXX is a 3-pole XLR male line plug with a nickel-plated metal shell, chuck-type strain relief and a flexible rubber boot. The connector accepts cables up to 8mm in diameter and uses solder contacts for termination, with silver-plated brass pins for low-resistance connection.\u003c\/p\u003e\n\u003cp\u003eDesigned for professional audio applications where a male XLR connector is needed on a microphone cable, mixer output, or equipment lead, the NC3MXX is the standard Neutrik male plug found in touring, studio, installation and broadcast audio work. The chuck-type strain relief grips the cable jacket without requiring a separate clamp, and the rubber boot flexes to protect the cable exit point from repeated bending.\u003c\/p\u003e\n\u003cp\u003eThe metal shell is nickel-plated for corrosion resistance and dimensional stability under handling and thermal cycling. The connector meets IEC 61076-2-103 and is compatible with any standard 3-pole XLR female socket including Neutrik's own NC3FXX and chassis-mount equivalents. The solder contacts accept wire gauges from 0.14mm² to 1.5mm², covering the majority of microphone and line-level cable constructions.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eNeutrik\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eXLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eNC3MX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable diameter does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe chuck-type strain relief and rubber boot accommodate cables from approximately 3.5mm to 8mm outer diameter. Most standard microphone cables (2-core screened, 6-7mm diameter) fit comfortably within this range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the contacts solder or crimp?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NC3MXX uses solder contacts. The pins are silver-plated brass and accept wire from 0.14mm² to 1.5mm² cross-section. Crimp-contact versions exist under different Neutrik part numbers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with all XLR sockets?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The NC3MXX meets IEC 61076-2-103 and mates with any standard 3-pole XLR female socket, including Neutrik, Amphenol, Switchcraft and generic equivalents.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between NC3MXX and NC3MX?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NC3MXX uses a nickel shell. The NC3MX uses a black finish. Internally they are identical in contact arrangement and cable capacity.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313477804299,"sku":"761.569UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/761569UK_0.jpg?v=1784899293"},{"product_id":"qtx-3-pin-xlr-plug-short-body-cable-mount","title":"QTX 3 Pin XLR Plug Short Body - Cable Mount","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX 3-pin XLR plug is a cable-mount connector with a short body design, plastic strain relief sleeve and integrated cable protector. The connector accepts cables up to 8mm in diameter and uses a screw-down cable clamp to secure the outer sheath once the internal conductors are soldered to the three pins.\u003c\/p\u003e\n\u003cp\u003eDesigned for field termination of balanced audio cables in live sound, studio and installation work, the short body reduces the overall length of the terminated connector, making it easier to fit into tight back-of-rack spaces and cable looms. The plastic outer shell protects the internal solder joints and pin assembly from impact damage during touring and live events.\u003c\/p\u003e\n\u003cp\u003eThe three-pin configuration carries balanced audio signal using pins 1 (ground\/shield), 2 (hot\/positive) and 3 (cold\/negative), following standard XLR wiring conventions. The connector mates with standard 3-pin XLR sockets on mixing consoles, amplifiers, active speakers and other pro audio equipment. The strain relief clamp grips the cable jacket to prevent flex damage at the solder points.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eXLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable diameter does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector accepts cables up to 8mm in outer diameter. This includes most standard microphone cables, DMX cables and line-level audio cables used in professional installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the cable terminated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe three internal pins are soldered to the cable conductors (hot, cold and ground). Once soldered, the cable jacket is clamped in the strain relief section and the outer shell is screwed together to seal the assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the plug or the socket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the plug (male connector) with three pins that insert into a female XLR socket. In standard audio wiring, the plug is fitted to the cable carrying signal from a source (microphone, mixer output) and the socket is on the receiving device (mixer input, amplifier).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 'short body' mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe short body design reduces the overall length of the connector compared to standard XLR plugs, making it easier to fit into congested equipment racks and cable bundles where space behind panels is limited.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313477837067,"sku":"761.627UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/761627UK_0.jpg?v=1784899304"},{"product_id":"qtx-3-pin-xlr-socket-short-body-with-strain-relief","title":"QTX 3-Pin XLR Socket Short Body with Strain Relief","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX 3-pin XLR socket uses a short-body design with integrated strain relief and a ribbed plastic cable protector. The three-pin configuration is wired to the standard balanced audio pinout (pin 1 ground, pin 2 hot, pin 3 cold) and accepts cables up to 8mm in diameter. The metal body shell provides cable screening continuity when paired with a shielded XLR plug.\u003c\/p\u003e\n\u003cp\u003eDesigned for stage rigging, PA installations and studio patch panels where cable runs need to be terminated quickly without soldering bulky connector bodies into tight spaces. The short body length allows the connector to fit behind rack-mounted gear and in shallow back boxes. The strain relief clamps the cable jacket to prevent pull-out force from reaching the solder joints, extending service life in temporary and permanent installations.\u003c\/p\u003e\n\u003cp\u003eThe ribbed plastic boot protects the cable exit point from repeated bending and sits flush with the rear of the metal shell. Solder terminals inside the connector body accept standard stranded or solid-core copper conductors, and the cable entry accepts both round and oval-section cable jackets up to 8mm. The three-pin socket configuration is compatible with standard balanced microphone cables, line-level audio cables and DMX512 lighting control cables.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eQTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eXLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable diameter does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strain relief and cable protector accommodate cables up to 8mm in diameter. This covers most standard mic cables, balanced audio cables and DMX cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for DMX lighting control?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 3-pin XLR configuration is compatible with DMX512 lighting control signals, though 5-pin XLR is now the recommended standard for new DMX installations to avoid confusion with audio cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require soldering?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The QTX socket uses solder terminals for the three pins and the cable screen connection. A soldering iron, solder and basic hand tools are needed for assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between a short and standard XLR body?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe short body is approximately 20-25mm shorter than a standard XLR connector body, allowing it to fit behind rack-mounted equipment and in shallow back boxes where a full-length connector would not clear the wall or panel.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313478000907,"sku":"761.657UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/761657UK_0.jpg?v=1784899320"},{"product_id":"neutrik-nc3fd-lx-3-pin-xlr-chassis-female-socket","title":"Neutrik NC3FD-LX 3-Pin XLR Chassis Female Socket","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Neutrik NC3FD-LX is a 3-pin XLR chassis-mount female socket with solder terminals and a 2-screw panel fixing system. The connector accepts standard 3-pin XLR male plugs and provides balanced audio connection for microphones, line-level signals and other professional audio equipment. The D-series housing uses Neutrik's latch-lock mechanism to secure the mating plug.\u003c\/p\u003e\n\u003cp\u003eDesigned for permanent installation in mixer panels, patch bays, stage boxes, equipment racks and amplifier rear panels, the NC3FD-LX mounts through a standard D-series chassis cutout and fixes with two M3 screws. The solder terminals accept cable conductors up to 2.5mm² and provide separate connection points for pins 1, 2 and 3 plus an earth contact linked to the metal shell.\u003c\/p\u003e\n\u003cp\u003eThe zinc die-cast body and nickel-plated contacts resist corrosion in touring and installed audio environments. The 2-screw fixing distributes mechanical stress across the panel, reducing the risk of connector loosening under repeated plug insertion and removal. The connector meets IEC 61076-2-103 specifications for XLR connectors and carries Neutrik's standard durability rating for professional audio applications.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eNeutrik\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eXLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eNC3FD-LX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable gauge does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe solder terminals accommodate cable conductors up to 2.5mm² cross-section. Most professional microphone and line-level cables fall within this range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat panel cutout size is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NC3FD-LX uses a standard Neutrik D-series chassis hole, which is 24mm diameter. The two M3 mounting screws fix the connector to the panel once inserted through the cutout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with all XLR plugs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The NC3FD-LX accepts all standard 3-pin XLR male plugs including Neutrik NC3MXX, Amphenol, Switchcraft and other manufacturers following IEC 61076-2-103 specifications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the NC3FD-LX and NC3FDL-1?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NC3FD-LX uses a 2-screw panel mount, while the NC3FDL-1 uses a single central screw fixing. The LX version distributes mounting stress more evenly, making it preferable for heavier-duty or high-vibration installations.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313478033675,"sku":"761.660UK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/761660UK_0.jpg?v=1784899337"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/collections\/154114UK_0_160f533e-5bb4-4195-9a34-5357251084fc.jpg?v=1785163873","url":"https:\/\/niori.co.uk\/collections\/av-accessories.oembed?page=3","provider":"Niori","version":"1.0","type":"link"}