{"title":"Audio Cables","description":"\u003cp\u003eOur range of audio cables covers XLR, jack, RCA phono and speaker cable in the lengths and terminations that stage and studio work actually needs. Cable is the cheapest part of a system and the most common cause of a fault, so buying properly made leads saves far more trouble than it costs. Found it cheaper elsewhere? We will match the price.\u003c\/p\u003e","products":[{"product_id":"av-link-figure-8-speaker-wire-2-x-13-strand-0-41mm-white-black-10m","title":"AV:Link Figure 8 Speaker Wire 10m White\/Black Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis AV:Link figure 8 speaker wire is a 10m run of twin-conductor cable with 0.41mm² cross-sectional area per conductor, built from copper-clad aluminium (CCA) strands in a 2 x 13 x 0.2mm configuration. The white PVC sheath carries one conductor with a black polarity marker running along its length, allowing quick visual identification of positive and negative during termination.\u003c\/p\u003e\n\u003cp\u003eDesigned for low-power audio distribution in domestic hi-fi systems, background music installations and small commercial AV setups, the cable suits runs between amplifiers and passive loudspeakers where power handling stays below the 2.5A maximum current rating. The figure-8 profile sits flat against skirting boards and under carpets without the bulk of round twin-core cable, and the twin conductors separate cleanly when stripped for screw-terminal or spring-clip speaker connections.\u003c\/p\u003e\n\u003cp\u003eThe 0.41mm² CSA provides adequate conductivity for short to medium runs (under 10m) at 8-ohm impedance without significant voltage drop, making it suitable for stereo pairs in typical living rooms, retail background music zones, and office meeting spaces. The CCA conductor material offers a lower-cost alternative to pure copper while maintaining acceptable performance for non-critical audio applications. The cable arrives in a sealed retail bag for resale or project stock.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.15KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e2.5A Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrand\u003c\/td\u003e\n\u003ctd\u003e2 x (13 x 0.2mmØ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.41mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003eCCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e10m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum recommended speaker distance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 0.41mm² CSA and 8-ohm impedance, runs under 10m maintain acceptable voltage drop for domestic hi-fi and background music systems. Longer runs or lower-impedance speakers may benefit from a larger gauge cable to avoid power loss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between CCA and pure copper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCCA (copper-clad aluminium) uses an aluminium core with a thin copper coating, providing lower cost and lighter weight than pure copper. Pure copper offers better conductivity and is preferred for high-fidelity or long-run installations, but CCA performs adequately for short runs and non-critical audio applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I identify polarity when terminating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne conductor has a black marker stripe running along the white sheath. This marked conductor is typically assigned to the negative terminal, with the unmarked conductor going to positive, but consistent polarity across both speakers matters more than which conductor is which.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PVC sheath is not rated for outdoor or UV exposure. For garden or outdoor speaker installations, use cable specifically rated for external use with UV-resistant and moisture-proof sheathing.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313079836939,"sku":"112.500UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112500UK_0.jpg?v=1784885546"},{"product_id":"av-link-usb-c-to-3-5mm-headphone-jack-adapter-with-built-in-dac","title":"AV:Link USB-C to 3.5mm Headphone Jack Adapter with Built-In DAC","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link USB-C to 3.5mm adapter converts a USB Type-C port on smartphones, tablets and laptops into a standard 3.5mm headphone socket. An integrated DAC (digital-to-analogue converter) chip inside the adapter body processes the digital audio signal from the USB-C port and outputs it as an analogue signal to the 3.5mm jack, allowing conventional wired headphones to work with devices that no longer carry a dedicated headphone socket.\u003c\/p\u003e\n\u003cp\u003eThe adapter suits daily use with modern Android smartphones, tablets, and USB-C equipped laptops where a 3.5mm headphone output has been removed from the hardware. The 140mm total length (including both the USB-C plug and the 3.5mm socket ends) gives enough cable to reach from a device in a pocket or on a desk to headphones worn at ear level without strain on the connection. The adapter weighs 4g and can be coiled or left plugged into headphones when not in use.\u003c\/p\u003e\n\u003cp\u003eThe DAC chip inside the adapter ensures compatibility with a range of USB-C devices that support audio-over-USB-C protocols. Not all USB-C ports output audio. Some USB-C ports are data-only or charge-only. So compatibility depends on whether the source device supports the USB Audio Class standard. The adapter outputs analogue audio, so it works with passive headphones, earbuds and headsets with in-line microphone controls.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e4.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e140mm x 10mm x 8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with all USB-C devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adapter works with USB-C devices that support audio output over USB-C (USB Audio Class standard). Most modern Android smartphones and tablets support this, but some USB-C ports are data-only or charge-only and will not output audio. Check your device specifications before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DAC and why is it needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe DAC (digital-to-analogue converter) chip inside the adapter converts the digital audio signal from the USB-C port into an analogue signal that conventional 3.5mm headphones can use. Without the DAC, passive headphones would not work with a USB-C audio output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with headphones that have in-line controls?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adapter outputs analogue audio, so it supports passive headphones, earbuds and headsets with in-line microphone and playback controls, provided the controls are compatible with your source device.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe total length from USB-C plug to 3.5mm socket is 140mm, with the cable section itself measuring 45mm. This gives enough reach to connect from a device in a pocket or on a desk to headphones at ear level without strain on the connectors.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313115160843,"sku":"122.430UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122430UK_0.jpg?v=1784889540"},{"product_id":"av-link-3-5mm-stereo-jack-wall-plate-module-white-with-female-fly-lead","title":"AV:Link 3.5mm Stereo Wall Plate Module in White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link wall plate module presents a front-facing 3.5mm stereo jack socket in a white 50mm x 25mm clip-in unit, with a 20mm female fly lead extending from the rear. The front socket accepts standard 3.5mm stereo jack plugs from headphones, portable speakers or audio devices, while the rear tail connects to an audio source cable concealed behind the wall.\u003c\/p\u003e\n\u003cp\u003eDesigned for permanent audio connection points in homes, offices, schools and commercial spaces, the module eliminates trailing cables across floors and desks by routing audio through the wall cavity. The module clips into compatible grid frames (AVSL 122.500UK single-gang or 122.505UK double-gang frames, sold separately) which mount onto standard UK back boxes, allowing multiple audio or AV modules to be combined in a single faceplate.\u003c\/p\u003e\n\u003cp\u003eThe white finish matches standard UK electrical accessories and blends into light-coloured walls. At 13g the module adds minimal weight to a multi-module grid plate. The 50mm x 25mm footprint is a single-width grid module, so two of these can fit side-by-side in a double-gang frame to create left and right channel connection points for stereo systems.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e50mm x 25mm x 200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.01KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat grid frame does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module clips into AV:Link 122.500UK (single-gang) or 122.505UK (double-gang) grid frames. These frames are sold separately and mount onto standard UK 25mm back boxes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the rear fly lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe female tail extends 20mm from the back of the module. This connects to a 3.5mm male jack cable routed through the wall cavity to the audio source location.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan two modules be used for stereo?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Two of these 50mm-wide modules fit side-by-side in a double-gang 122.505UK frame, allowing separate left and right channel connection points for a stereo system. Each module would connect via its rear tail to the corresponding left or right output cable from the audio source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for speaker-level signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module is designed for line-level audio signals from headphone outputs, portable devices and pre-amplified sources. It is not rated for amplified speaker-level signals which require higher-gauge cable and different connector types.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313118241035,"sku":"122.525UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122525UK_0.jpg?v=1784889635"},{"product_id":"qtx-outdoor-hipar-dmx-extension-lead-3m-ip65","title":"QTX Outdoor HIPAR DMX Extension Lead - 3m IP65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX HIPAR DMX extension lead is a 3m IP65-rated cable designed to extend DMX control signals between QTX HIPAR weatherproof PAR cans and other compatible fixtures. The cable uses 3-pin XLR-style connectors at both ends, housed in rubberised weatherproof shells that maintain the IP65 rating when mated with IP65-rated fixture sockets.\u003c\/p\u003e\n\u003cp\u003eDesigned for outdoor stage lighting, events, architectural installations and garden lighting where fixtures are spaced beyond the reach of standard DMX cables, the lead allows multiple HIPAR PAR cans to be daisy-chained across distances up to 3m between fixtures. The IP65 rating protects the cable and connectors from rain, dust and temporary submersion, making it suitable for use in British weather without requiring additional protection or cable covers.\u003c\/p\u003e\n\u003cp\u003eThe cable core is a shielded twisted-pair construction that maintains DMX512 signal integrity across the 3m run, preventing data loss or flicker in controlled fixtures. The outer sheath is a flexible black rubber compound that resists UV degradation and remains pliable in low temperatures, so the cable does not stiffen or crack during outdoor winter use. The connectors are keyed to prevent incorrect insertion and include strain relief glands where the cable enters each housing.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.18KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this cable compatible with non-QTX DMX fixtures?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable uses standard 3-pin XLR-style connectors and will physically mate with most DMX fixtures. However, the IP65 weatherproof rating is only maintained when used with IP65-rated sockets on both ends, such as those on QTX HIPAR PAR cans. Using it with non-weatherproof fixtures outdoors exposes the connection point to moisture ingress.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple extension leads be daisy-chained?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. DMX512 protocol allows cable runs up to 300m before signal degradation becomes an issue, so multiple 3m extensions can be linked together. For runs beyond 100m or complex layouts with many fixtures, a DMX signal booster or splitter is recommended to maintain data integrity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable carry power or just DMX signal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a DMX signal cable only. It carries control data between fixtures but does not supply mains power. Each fixture in the chain requires its own power connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperature range can the cable withstand?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe rubberised sheath is rated for outdoor use in typical UK weather conditions, remaining flexible in winter temperatures down to approximately -10°C and resisting UV degradation in summer sun. Avoid leaving the cable coiled tightly in direct sunlight for extended periods, as this can accelerate wear on the outer sheath.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313175978251,"sku":"154.423UK","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/154423UK_0.jpg?v=1784892203"},{"product_id":"citronic-20m-xlr-iec-multicore-cable-reel-black","title":"Citronic 20m XLR \u0026 IEC Multicore Cable Reel - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic 20m XLR\/IEC multicore cable reel carries both power and balanced audio on a single spool, with an IEC mains lead (male to female) and an XLR lead (male to female) wound together on a tubular metal frame. The drum holds both cables on the same core, allowing power and audio to be run to an active speaker, powered mixer or stage box in one deployment rather than laying separate cables.\u003c\/p\u003e\n\u003cp\u003eDesigned for live sound reinforcement, event installations, rehearsal spaces and semi-permanent AV setups, the reel suits applications where power and signal need to reach the same destination without tangling separate cable runs. The tubular metal stand gives the reel a stable footprint when unwound, and the integral carry handle folds down for transport. Both the XLR and IEC connections use screened cable to reduce hum and interference over the 20m run.\u003c\/p\u003e\n\u003cp\u003eThe XLR sockets sit on the drum face alongside the IEC socket, with trailing tails terminating in XLR and IEC plugs. This configuration means the reel stays at the source end (mixer, power distribution) and the plugs reach the destination (active speaker). The 14mm combined cable diameter makes the wound reel compact enough to store in a van or rack case without taking up excessive space, and the 6kg total weight keeps it portable for single-person setup.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eReel length\u003c\/td\u003e\n\u003ctd\u003e20m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e6.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e14mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003eIEC and XLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e220mm x 300mm x 370mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat equipment does this connect to?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe reel is designed to run power and audio to active speakers, powered monitors or stage equipment that requires both mains and balanced audio. The IEC connection suits most powered speakers and mixers, while the XLR handles line-level or mic-level balanced signals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the cables screened?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Both the XLR and IEC leads use screened cable to reduce electromagnetic interference and hum pickup over the 20m length, which is particularly important in live sound environments with stage lighting and mains power nearby.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the reel be used with the cable fully wound?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor short durations and low-power devices, yes. For sustained use or higher-draw equipment, unwind the cable fully to prevent heat buildup inside the wound spool, which can occur when running mains current through a coiled conductor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the configuration of the connectors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe drum face has female IEC and female XLR sockets. The trailing tails (the loose cables) terminate in male IEC and male XLR plugs. This means the reel stays at the source (mixer, power) and the plugs reach the destination (active speaker).\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313290830091,"sku":"173.922UK","price":85.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/173922UK_0.jpg?v=1784895818"},{"product_id":"qtx-dmx-lighting-lead-3-pin-xlr-plug-to-3-pin-xlr-socket-1-5m","title":"QTX DMX Lighting Lead 3-Pin XLR Plug to 3-Pin XLR Socket - 1.5m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX DMX Lighting Lead is a 1.5m cable with a 3-pin XLR plug on one end and a 3-pin XLR socket on the other, designed to carry DMX512 control signals between lighting controllers and fixtures. The 4mm diameter cable uses shielded construction to reduce electromagnetic interference and crosstalk, maintaining signal integrity across short cable runs.\u003c\/p\u003e\n\u003cp\u003eThis length works in rack-mounted control setups where a DMX controller sits directly above or below a dimmer pack or fixture controller, and in stage setups where fixtures are positioned within 1-2m of the signal source or previous fixture in a daisy chain. The 1.5m length minimises cable clutter in tight spaces like small studios, mobile DJ rigs, and compact stage setups where longer cables would create excess slack and tripping hazards.\u003c\/p\u003e\n\u003cp\u003eThe 3-pin XLR connectors are the standard for DMX lighting control, compatible with the majority of moving heads, LED parcans, DMX dimmers and lighting consoles on the market. The plug and socket housings are moulded plastic with metal shells that provide strain relief at the cable entry point. The cable jacket is flexible enough to route through cable trays and around corners without kinking.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003e4.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is this cable used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis cable carries DMX512 control signals from a lighting controller or console to DMX-compatible fixtures like moving heads, LED parcans and dimmer packs. It can also link fixtures in a daisy chain by connecting the DMX Out socket on one fixture to the DMX In socket on the next.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for audio?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the 3-pin XLR connectors physically match audio microphone cables, this cable is optimised for DMX data transmission rather than balanced audio. For best results, use dedicated microphone cable for audio and dedicated DMX cable for lighting control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many fixtures can be connected in a chain?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDMX512 protocol supports up to 32 fixtures per DMX universe in a daisy chain, though in practice the limit depends on the quality of the cable run and the input impedance of the fixtures. This 1.5m cable would typically be one section in a longer chain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable jacket provides basic moisture resistance for indoor and covered outdoor environments. For exposed outdoor use in rain or damp conditions, consider housing the connectors under protective covers or using IP-rated DMX connectors.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313330479371,"sku":"177.901UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/177901UK_0.jpg?v=1784895832"},{"product_id":"qtx-dmx-lighting-lead-3-pin-xlr-plug-to-3-pin-xlr-socket-3m","title":"QTX DMX Lighting Lead 3-Pin XLR Plug to 3-Pin XLR Socket - 3m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX DMX Lighting Lead is a 3m shielded cable with a 3-pin XLR male plug at one end and a 3-pin XLR female socket at the other, designed to carry DMX512 control signals between lighting controllers and fixtures. The 4mm outer diameter cable uses internal shielding to reduce electromagnetic interference, maintaining signal integrity across the run.\u003c\/p\u003e\n\u003cp\u003eDesigned for stage lighting, studio setups and event installations where fixtures need to be daisy-chained or patched into a DMX controller, the 3m length suits close-proximity runs between adjacent fixtures, from a dimmer pack to a fixture, or from a controller to the first fixture in a chain. The flexible outer jacket allows the cable to be routed around rigging and truss without kinking, and the XLR connectors lock securely to prevent accidental disconnection during use.\u003c\/p\u003e\n\u003cp\u003eThe cable conforms to the DMX512-A standard, which specifies 3-pin XLR as the connector type for basic lighting control systems. The shielding on the inner conductors reduces the risk of signal degradation from nearby mains cables or RF interference, which can otherwise cause flickering or erratic behaviour in DMX-controlled fixtures. The 3m length keeps cable clutter manageable in smaller rigs while providing enough reach for typical fixture spacing on a bar or stand.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003e4.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between DMX cable and standard XLR audio cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDMX cable uses a specific impedance (110Ω) and twisted-pair construction to carry the DMX512 digital signal accurately. Standard audio XLR cable has different impedance and may cause signal errors or dropouts when used for DMX over longer runs. For short 3m runs the difference is less critical, but DMX-rated cable is always the correct choice for lighting control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I daisy-chain multiple fixtures using this cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 3-pin XLR socket on one end connects to the DMX output of a controller or the DMX output of the previous fixture in the chain, and the 3-pin XLR plug on the other end connects to the DMX input of the next fixture. The DMX512 standard supports up to 32 fixtures on a single chain, though practical limits depend on the quality of the fixtures and cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this cable suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable itself is flexible and shielded, but it is not rated for permanent outdoor installation or exposure to water. For outdoor events where the cable may be exposed to rain or ground moisture, it should be protected or replaced with an IP-rated outdoor DMX cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length runs are possible before needing a DMX booster?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe DMX512-A standard recommends a maximum run of 300m before signal degradation becomes a concern. In practice, runs beyond 150m often benefit from a DMX splitter or booster to maintain signal quality, especially if the chain includes more than 16 fixtures. For a 3m cable, signal loss is not a concern.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313330675979,"sku":"177.904UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/177904UK_0.jpg?v=1784895845"},{"product_id":"qtx-dmx-lighting-lead-3-pin-xlr-plug-to-3-pin-xlr-socket-6m","title":"QTX DMX Lighting Lead 3-Pin XLR Plug to 3-Pin XLR Socket - 6m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX DMX lighting lead is a 6m shielded cable with a 3-pin XLR male plug at one end and a 3-pin XLR female socket at the other, built for transmitting DMX512 control signals between lighting controllers and fixtures. The 4mm outer diameter cable houses shielded conductors that reduce interference from nearby mains cables and radio frequency noise, maintaining signal integrity across typical stage and studio runs.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation in DMX lighting chains where multiple fixtures are linked in series, the cable connects the DMX output of a controller or the DMX pass-through of one fixture to the DMX input of the next. The 6m length suits short-to-medium runs between fixtures positioned across a stage, truss or studio rig without requiring excessive cable coiling. The shielded construction makes the cable suitable for environments with high electrical noise, such as live music venues with amplifiers and power distribution nearby.\u003c\/p\u003e\n\u003cp\u003eBoth XLR connectors use metal shells with strain relief boots that protect the solder joints from repeated plugging and unplugging. The cable jacket is flexible enough to route around obstacles and through cable trays without kinking, while retaining enough body to avoid tangling when coiled for transport. The cable meets the impedance and capacitance requirements of the DMX512 protocol, ensuring compatibility with standard DMX lighting equipment from manufacturers including ADJ, Chauvet, Martin and Showtec.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003e4.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used for audio?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. While the connectors are 3-pin XLR, DMX cables use a different impedance specification (120Ω) than microphone cables (typically 75Ω or lower). Using a DMX cable for audio may work over short runs but can degrade signal quality. Use dedicated audio XLR cables for microphones and line-level connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many fixtures can be daisy-chained on a single DMX line?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe DMX512 specification supports up to 32 devices on a single DMX universe. In practice, 20-25 fixtures is a more reliable working limit, especially when using multiple cable runs totaling over 50m. Beyond this, signal degradation or timing errors may occur without a DMX splitter or booster.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable need termination?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe last fixture in a DMX chain should ideally have a 120Ω terminator plugged into its DMX output socket to prevent signal reflections. Many modern fixtures have built-in termination or auto-termination, but if you notice flickering or erratic behaviour on the last fixture in the chain, try adding a terminator plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum recommended cable run length for DMX?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe DMX512 standard specifies a maximum run length of 300m without a repeater or booster. In real-world installations with multiple connectors and fixtures, keeping individual cable runs under 100m total per universe provides a safety margin against signal loss.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313330708747,"sku":"177.907UK","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/177907UK_0.jpg?v=1784895857"},{"product_id":"qtx-dmx-lighting-lead-3-pin-xlr-plug-to-3-pin-xlr-socket-10m","title":"QTX DMX Lighting Lead 3-Pin XLR Plug to 3-Pin XLR Socket - 10m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX DMX lighting lead is a 10m shielded cable with a 3-pin XLR male plug at one end and a 3-pin XLR female socket at the other, designed to carry DMX512 control signals between lighting controllers and fixtures. The 4.0mm diameter cable uses a copper shield around the signal conductors to reduce electromagnetic interference from mains cables, radio frequencies and other sources that can corrupt DMX data in live event environments.\u003c\/p\u003e\n\u003cp\u003eUsed to link DMX-compatible lighting fixtures in a daisy-chain configuration, the lead connects the DMX output of a lighting controller to the first fixture, then from fixture to fixture along the rig until all are addressed. The 10m length suits medium-sized stage setups, mobile DJ rigs and installed church or theatre lighting where fixtures are spaced 3-8m apart. The cable is flexible enough to route through truss, around stage edges and behind equipment without kinking.\u003c\/p\u003e\n\u003cp\u003eThe 3-pin XLR connectors use a locking collar that rotates to secure the connection and prevent accidental disconnection when the cable is moved or tugged during rigging. The metal bodies on both plug and socket provide strain relief where the cable enters the connector, reducing wear at the point where cables most commonly fail. The shielded construction keeps the DMX signal clean over the full 10m run, maintaining reliable communication between controller and fixtures without requiring signal boosters or repeaters.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003e4.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is DMX512 and what does this cable carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDMX512 is a digital control protocol used in stage and event lighting to send instructions from a controller to multiple fixtures simultaneously. This cable carries the DMX512 data signal, which tells each fixture what colour, intensity, strobe pattern or movement to execute. It does not carry power. Fixtures need separate mains or low-voltage power cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I connect multiple cables to extend the run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. You can connect multiple DMX leads end-to-end by plugging the male XLR of one cable into the female XLR socket of another. However, DMX512 has a maximum recommended cable run of 300-400m before signal degradation becomes an issue. For runs longer than 300m, use a DMX signal booster or splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with 5-pin XLR fixtures?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a 3-pin XLR cable. Some professional lighting fixtures use 5-pin XLR connectors for DMX, which require a 5-pin cable or a 3-pin to 5-pin adapter. Check your fixtures before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable need to be terminated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDMX512 specification recommends terminating the last fixture in a chain with a 120-ohm resistor to prevent signal reflections that can cause flickering or erratic behaviour. Some fixtures have a built-in termination switch; if not, you can use a separate XLR terminator plug on the last fixture in the line.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313330839819,"sku":"177.910UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/177910UK_0.jpg?v=1784895870"},{"product_id":"qtx-dmx-lighting-lead-3-pin-xlr-plug-to-3-pin-xlr-socket-20m","title":"QTX DMX Lighting Lead 3-Pin XLR Plug to 3-Pin XLR Socket - 20m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX DMX lighting lead is a 20m cable with a 3-pin XLR male plug at one end and a 3-pin XLR female socket at the other, designed to carry DMX512 control signals between lighting fixtures, controllers and dimmer packs. The 4mm diameter cable uses shielded construction to reduce electrical interference from mains cables, radio transmitters and other stage equipment that can disrupt DMX data transmission.\u003c\/p\u003e\n\u003cp\u003eDesigned for stage rigs, event production and installation environments where lighting fixtures need to be chained over distances beyond the reach of a single short cable, the 20m length allows fixtures to be positioned across large performance spaces, warehouse venues and outdoor stages without requiring multiple cable joins. The 3-pin XLR connectors use metal shells with spring-loaded locking tabs that resist accidental disconnection during setup, teardown and live performance.\u003c\/p\u003e\n\u003cp\u003eThe cable jacket is rated for repeated coiling and uncoiling without fracturing the internal shielding or conductors, making it suitable for touring rigs where the same cable may be set up and packed down multiple times per week. The 4mm outer diameter gives the cable enough mass to resist tangling when laid across a stage floor but remains flexible enough to route around obstacles without requiring excessive slack. The XLR connectors are numbered 1-3 internally to match the DMX512 pin assignment standard used across most modern lighting fixtures.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003e4.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is this cable used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis cable carries DMX512 control signals between lighting controllers, dimmers and fixtures in stage, event and installation lighting systems. It allows you to control fixture parameters such as colour, dimming, movement and effects from a central lighting desk or software controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple cables be chained together?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 3-pin XLR plug to socket design allows multiple cables to be connected in series to extend the DMX signal chain. DMX512 protocol supports up to 32 fixtures per universe over a maximum recommended cable run of 300-400m before signal degradation becomes an issue, though using a DMX splitter or repeater is recommended for larger installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this cable compatible with audio XLR equipment?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePhysically the connectors will fit, but DMX cable and audio XLR cable use different impedance ratings. DMX cable is typically 110-120 ohm, while audio microphone cable is 50-75 ohm. Using audio cable for long DMX runs or vice versa can cause signal issues. For short runs under 10m the difference is often negligible, but for a 20m cable it is best to use the correct specification for the application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the cable stored between uses?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCoil the cable in loose loops approximately 300-400mm in diameter and secure with a velcro tie or cable wrap. Avoid tight coiling or kinking the cable, as this can damage the internal shielding over time. Store in a dry location away from sharp objects and heavy equipment that might crush the cable jacket.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313330872587,"sku":"177.913UK","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/177913UK_0.jpg?v=1784895883"},{"product_id":"qtx-dmx-lighting-lead-3-pin-xlr-plug-to-3-pin-xlr-socket-0-75m","title":"QTX DMX Lighting Lead 3-Pin XLR Plug to 3-Pin XLR Socket - 0.75m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX DMX lighting lead is a 0.75m shielded cable with a 3-pin XLR male plug on one end and a 3-pin XLR female socket on the other, used to connect DMX lighting fixtures in a daisy chain or to link a controller to the first fixture in a lighting rig. The 4mm diameter cable uses a flexible outer jacket over internal shielding to reduce electromagnetic interference from nearby mains cables, radio-frequency sources and other stage equipment.\u003c\/p\u003e\n\u003cp\u003eThis short lead length suits tight configurations where fixtures are mounted close together on a truss, or where a controller sits near the first fixture in the chain. Lighting technicians use 0.75m leads to reduce cable clutter on stage floors and truss runs, keeping the DMX signal path tidy without leaving excess cable coiled behind fixtures. The shielding helps maintain signal integrity when the cable runs alongside mains power feeds or audio snakes, which is common in stage and event setups.\u003c\/p\u003e\n\u003cp\u003eThe 3-pin XLR connectors use a standard pinout compatible with most DMX512 fixtures and controllers. The flexible jacket allows the cable to be routed around stands, through cable trays and along truss without kinking, and the shielding provides interference resistance when multiple cables run in parallel. The cable is designed for repeated handling during load-in and strike, and the outer jacket resists scuffing on rough floors and truss edges.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003e4.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this cable suitable for DMX512 protocol?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The QTX lead uses a 3-pin XLR configuration with internal shielding, which is standard for DMX512 lighting control. It carries data signals from a lighting controller to fixtures or between fixtures in a daisy chain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between DMX cable and audio XLR cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDMX cables use a higher impedance rating (typically 120 ohm) and better shielding than standard audio XLR cables to maintain digital signal integrity over longer runs. While audio XLR cables may work for short DMX chains, dedicated DMX cable reduces the risk of data errors and fixture drop-outs in professional lighting rigs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable is designed for stage and event use, which includes temporary outdoor setups. However, the connectors are not IP-rated, so they should not be left exposed to prolonged rain or submersion. For outdoor use, keep connectors dry and off the ground.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum chain length for DMX?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDMX512 protocol allows up to 32 devices on a single chain, with a maximum total cable run of approximately 300-400m before signal degradation becomes an issue. For longer runs or more devices, a DMX splitter or repeater is needed to regenerate the signal.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313330905355,"sku":"177.914UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/177914UK_0.jpg?v=1784895896"},{"product_id":"qtx-dmx-terminator-120-ohms-3-pin-xlr","title":"QTX DMX Terminator 120 Ohms - 3-Pin XLR","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX DMX terminator is a 3-pin XLR plug with a 120-ohm resistor soldered between pins 2 and 3, designed to terminate the end of a DMX512 lighting control chain. The resistor matches the nominal impedance of DMX cable, absorbing the signal at the end of the run and preventing reflected signals from bouncing back down the chain and causing flickering, data errors or addressing conflicts.\u003c\/p\u003e\n\u003cp\u003eDMX lighting systems operate as a single unidirectional data chain from controller to first fixture, first to second, and so on until the last device in the line. Without a terminator, the signal reaching the end of the chain reflects back along the cable, interfering with the outgoing signal and causing intermittent or erratic fixture behaviour, particularly on longer runs or chains with more than 10-15 fixtures. Adding a terminator to the output socket of the final fixture in the chain stabilises the signal across the entire run.\u003c\/p\u003e\n\u003cp\u003eThe QTX terminator plugs directly into any standard 3-pin female XLR socket. It carries no cable or pass-through connection. It is purely an end-of-chain plug. The metal XLR shell provides shielding and strain relief on the resistor connection. For professional touring rigs, venue installations or theatre lighting setups where cable runs exceed 50m or fixture counts go beyond 15 units, a terminator is essential for reliable signal integrity.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e120 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhen is a DMX terminator needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA terminator is required at the end of any DMX512 chain to prevent signal reflection. It is particularly important on runs longer than 50m, chains with more than 15 fixtures, or setups experiencing flickering or intermittent addressing issues.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit 5-pin XLR systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This terminator uses a 3-pin XLR connector and is designed for 3-pin DMX systems. For 5-pin DMX chains, a separate 5-pin terminator is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere does the terminator plug in?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe terminator plugs into the DMX output socket of the final fixture in the chain. It does not pass the signal onwards. It is purely an end-of-line plug to absorb the signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan one terminator be used across multiple setups?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The terminator can be moved between different DMX chains as needed. It is reusable and does not require calibration or configuration for each setup.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313331101963,"sku":"177.924UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/177924UK_0.jpg?v=1784895907"},{"product_id":"qtx-essential-speaker-cable-spk-to-spk-1-5m-0-75mm","title":"QTX Essential Speaker Cable SPK to SPK 1.5m - 0.75mm²","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX Essential is a 1.5m speaker cable with latching SPK plugs at both ends, built around twin 0.75mm² conductors rated for low-impedance speaker connections. The cable uses 30-strand copper conductors inside a 5.8mm diameter soft-grip jacket that resists tangling and coils without memory retention.\u003c\/p\u003e\n\u003cp\u003eDesigned for compact PA setups, home studios and rehearsal spaces where the speaker sits close to the amplifier or powered mixer, the 1.5m length keeps cable runs tidy without excess slack trailing across floors. The latching SPK connectors twist-lock onto compatible SPK sockets, providing a more secure connection than friction-fit jacks in mobile or vibration-prone installations such as DJ rigs or small live setups.\u003c\/p\u003e\n\u003cp\u003eThe twin 0.75mm² conductors handle typical passive speaker loads up to 150W per channel without significant voltage drop at 1.5m distance. The cable is machine-assembled for consistent build quality and uses a flexible outer jacket that tolerates repeated coiling and transport without stiffening or cracking. The soft-grip finish on the jacket provides tactile feedback when routing cables in low-light environments.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e5.8mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 30 strand, 0.17mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e2 x 0.75mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x SPK plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speakers is this cable suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 0.75mm² conductor cross-section handles passive speakers up to approximately 150W per channel at 1.5m cable length without significant signal loss. Suitable for compact near-field monitors, small PA speakers and home studio monitors with SPK input sockets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the SPK plugs lock in place?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. SPK plugs use a twist-lock mechanism that secures the connection to compatible SPK sockets, providing a more stable connection than friction-fit quarter-inch jacks in installations where the cable may be subjected to movement or vibration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used for long cable runs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 1.5m this cable is designed for short-range connections. For cable runs beyond 3m, consider a heavier-gauge cable (1.5mm² or 2.5mm²) to minimise voltage drop and maintain signal integrity, particularly at higher power levels.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313387856139,"sku":"190.178UK","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190178UK_0.jpg?v=1784895967"},{"product_id":"qtx-essential-speaker-cable-spk-to-spk-3m-0-75mm","title":"QTX Essential Speaker Cable SPK to SPK - 3m 0.75mm²","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX Essential is a 3m speaker cable with latching SPK plugs at both ends, built around 2 x 0.75mm² conductors (2 x 30 strand, 0.17mm diameter per strand) and a 5.8mm outer diameter soft-grip jacket. The SPK connectors latch into compatible sockets on powered speakers and amplifiers, providing a more secure connection than quarter-inch jacks in mobile or stage environments.\u003c\/p\u003e\n\u003cp\u003eDesigned for connecting amplifiers to passive speakers or powered mixers to active monitors in small to medium PA setups, rehearsal rooms, home studios and mobile DJ rigs, the 3m length suits near-field monitor placement or stage monitors positioned within 2-3 metres of the backline. The 0.75mm² cross-sectional area handles typical 8-ohm loads up to around 200W RMS without significant signal loss at this distance.\u003c\/p\u003e\n\u003cp\u003eThe soft-grip outer jacket resists tangling during coiling and reduces kinking at the cable exit points behind the SPK plugs. The cable is machine-assembled rather than hand-soldered, giving consistent build quality across production runs. The blue collar strain relief on each plug marks the cable exit point and provides additional flex protection where the cable meets the connector housing.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e5.8mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 30 strand, 0.17mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e2 x 0.75mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x SPK plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum power this cable can handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 3m length with 0.75mm² CSA, the cable suits typical 8-ohm passive speaker loads up to around 200W RMS. Higher wattages or lower impedances (4 ohm) may benefit from thicker cable to reduce resistance losses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the SPK plugs compatible with standard Speakon sockets?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSPK plugs are not the same as Speakon connectors. SPK plugs use a different latching mechanism and pin configuration. Check your amplifier and speaker rear panels to confirm they accept SPK-type connections before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used for long cable runs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3m length and 0.75mm² conductor size are suited to short runs between nearby equipment. For runs beyond 5 metres or higher power applications, consider stepping up to 1.5mm² or 2.5mm² speaker cable to maintain signal integrity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable directional?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Speaker cable is non-directional. Either end can connect to the amplifier or the speaker without affecting performance.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313387888907,"sku":"190.179UK","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190179UK_0.jpg?v=1784895980"},{"product_id":"qtx-essential-speaker-cable-2-x-spk-plugs-6m","title":"QTX Essential Speaker Cable 2 x SPK Plugs - 6m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX Essential is a 6m speaker cable with two latching SPK plugs at either end, built around 2 x 0.75mm² conductors (30 strands of 0.17mm copper per core) inside a 5.8mm flexible outer jacket. The cable is machine-assembled to maintain consistent build quality across production runs, and the latching SPK connectors lock into compatible speaker sockets to prevent accidental disconnection during transport or use.\u003c\/p\u003e\n\u003cp\u003eDesigned for mid-sized live PA setups, practice rooms, function spaces and permanent installations where a 6m reach is needed between amplifier and speaker, the cable suits passive speaker cabinets rated up to several hundred watts RMS. The 0.75mm² conductor cross-section provides sufficient current capacity for most portable and mid-power PA applications without requiring the weight and stiffness of heavier-gauge cable. The soft-grip jacket resists tangling when coiled and handles repeated wrapping and unwrapping without kinking.\u003c\/p\u003e\n\u003cp\u003eThe 6m length bridges typical stage-to-monitor distances, front-of-house to main speaker runs in small-to-medium venues, and allows routing around obstacles or through cable trays in fixed installations. The cable can be coiled down to approximately 250mm diameter for storage in equipment bags or cable drums, and the jacket retains flexibility across a wide temperature range for both indoor and sheltered outdoor use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e6.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e5.8mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 30 strand, 0.17mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e2 x 0.75mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x SPK plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power rating does this cable support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2 x 0.75mm² conductor cross-section handles most portable and mid-power PA applications up to several hundred watts RMS per channel over this 6m length. For high-power touring systems or very long cable runs, heavier-gauge cable may be needed to minimise voltage drop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the SPK plugs compatible with Speakon sockets?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. SPK plugs fit standard Neutrik Speakon NL4 and NL2 sockets, locking into place with a quarter-turn twist to prevent accidental disconnection during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable is suited to sheltered outdoor use (covered stages, marquees, patios with overhead cover) but is not rated for permanent outdoor installation or direct exposure to rain and UV without additional protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should the cable be stored?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCoil the cable in loose loops of approximately 250-300mm diameter, avoiding tight bends or kinks. Store in a dry location away from heat sources, and keep connectors clean and free from dust when not in use.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313387954443,"sku":"190.180UK","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190180UK_0.jpg?v=1784895993"},{"product_id":"qtx-essential-12m-speaker-cable-with-spk-plugs-0-75mm","title":"QTX Essential 12m Speaker Cable with SPK Plugs - 0.75mm²","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX Essential is a 12m speaker cable with latching SPK plugs pre-fitted at both ends, built around 2 x 0.75mm² conductors with a 5.8mm outer diameter. The cable uses 2 x 30-strand 0.17mm conductors inside a soft-grip anti-tangle jacket, giving handling flexibility during setup and teardown without the stiffness of some cheaper speaker cables.\u003c\/p\u003e\n\u003cp\u003eDesigned for stage use, band rehearsals, and fixed installation where speakers sit at distance from the amplifier or mixing desk, the 12m length covers typical stage-to-FOH runs or rear-of-hall speaker positions without requiring extension or joins. The latching SPK plugs lock into compatible Speakon-type sockets, reducing the risk of accidental disconnection during performance or transport. The machine-assembled terminals reduce contact resistance compared to hand-soldered joints.\u003c\/p\u003e\n\u003cp\u003eThe 0.75mm² conductor cross-sectional area is rated for moderate power loads across typical passive speaker runs up to around 500W RMS per channel at 8 ohms over this 12m distance. The jacket material resists kinking and tangling when coiled, which matters when the cable is being packed and unpacked regularly for mobile PA work or touring. The cable is supplied as a single 12m assembled lead, not as separate parts requiring termination on-site.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e12.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e5.8mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 30 strand, 0.17mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e2 x 0.75mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x SPK plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable has latching SPK plugs at both ends, compatible with standard Speakon-type sockets found on most powered speakers, passive speakers and amplifier outputs. These lock into place with a twist, reducing accidental disconnection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power rating does 0.75mm² support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOver this 12m length, the 0.75mm² conductor cross-section is rated for moderate power loads, typically up to around 500W RMS per channel at 8 ohms. For higher power or longer runs, a larger CSA cable (1.5mm² or 2.5mm²) would reduce resistance and voltage drop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this cable suitable for permanent installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable is designed primarily for portable PA use with its soft-grip jacket optimised for handling and coiling. For permanent fixed installation, consider a cable with a stiffer jacket and UV resistance if any part of the run is exposed to daylight or outdoor conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used with banana plug or bare wire terminals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The cable is supplied with SPK plugs pre-fitted at both ends and cannot be re-terminated without cutting off the existing plugs. If your amplifier or speaker only accepts banana plugs or screw terminals, you would need an SPK-to-banana adapter or a different cable type.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313388019979,"sku":"190.181UK","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190181UK_0.jpg?v=1784896005"},{"product_id":"citronic-classic-speaker-splitter-lead-0-3m","title":"Citronic Classic Speaker Splitter Lead - 0.3m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic Classic Speaker Splitter Lead is a 0.3m Y-cable with one SPK male plug splitting to two SPK female sockets, allowing a single speaker output from an amplifier to drive two separate speaker cabinets in parallel. Each output leg handles up to 6A, giving a combined 12A capacity when both outputs are used.\u003c\/p\u003e\n\u003cp\u003eDesigned for live PA setups, installation systems and rehearsal rigs where two cabinets need to run from one amplifier channel, the short 0.3m length keeps the split close to the amp output panel, reducing cable runs and keeping the rear of the rack or stage tidy. The parallel wiring means both speakers share the same signal, so the total impedance seen by the amplifier drops when both outputs are connected. Ensure your amplifier is rated to handle the combined load.\u003c\/p\u003e\n\u003cp\u003eThe cable uses high-purity copper conductors with a soft-grip rubberised outer jacket and anti-tangle construction. The SPK connectors are the four-pole twist-lock style commonly found on professional PA equipment, giving a secure mechanical connection that resists accidental disconnection during transport or use. At 130g the cable adds minimal weight to a rack or flight case.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. current\u003c\/td\u003e\n\u003ctd\u003e6A per side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e0.3m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.13KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens to the impedance when I use both outputs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you connect two speakers in parallel using this splitter, the total impedance seen by the amplifier halves. For example, two 8Ω cabinets in parallel present a 4Ω load. Check your amplifier can safely drive the resulting impedance before connecting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this to run stereo from one output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a parallel splitter. Both outputs carry the same mono signal. To run stereo you need two separate amplifier channels, one for left and one for right.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum power this cable can handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 6A per output and typical PA voltages, each leg handles approximately 500-600W into an 8Ω load. The cable itself is rated for the current; the limiting factor is usually the amplifier's output capability and the speaker impedance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the SPK connectors the same as Speakon?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSPK and Speakon are both twist-lock speaker connector types but they are not directly compatible. SPK connectors use a four-pole configuration common on older PA equipment and some install systems. Check your amplifier and speakers use SPK before ordering.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313388085515,"sku":"190.182UK","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190182UK_0.jpg?v=1784896026"},{"product_id":"citronic-classic-1-5m-speaker-cable-spk-plug-to-spk-plug","title":"Citronic Classic 1.5m Speaker Cable - SPK Plug to SPK Plug","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic Classic is a 1.5m speaker cable with latching SPK plugs at both ends, 2 x 1.5mm² cross-sectional area copper conductors and a rubberised outer jacket. The cable connects powered amplifiers or active speaker outputs to passive speaker cabinets fitted with SPK sockets, providing a compact alternative to longer runs where components are close-coupled.\u003c\/p\u003e\n\u003cp\u003eDesigned for desktop PA setups, rehearsal room configurations, DJ booth connections and portable speaker systems where the amplifier sits within 1.5m of the cabinet, the cable length minimises slack and reduces trip hazards. The latching SPK plugs twist-lock into matching sockets on speakers and amplifiers, preventing accidental disconnection during transport or live use. The 7mm diameter cable sits flat on floors and coils tightly for storage without kinking.\u003c\/p\u003e\n\u003cp\u003eEach conductor uses 50 strands of 0.17mm pure copper wire, machine-soldered to the SPK plug terminals for consistent electrical continuity. The rubberised outer jacket provides grip when handling the cable and resists tangling when coiled. Cotton reinforcement inside the jacket adds tensile strength without adding significant weight, keeping the cable under 200g for the full 1.5m run. The black finish blends into most PA and studio environments.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e7.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 50 strand, 0.17mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e2 x 1.5mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x SPK plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat equipment does this cable connect?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable connects any powered amplifier or active speaker with an SPK output socket to a passive speaker cabinet with an SPK input socket. Common applications include DJ controllers with built-in amplifiers, powered PA mixers and active monitor speakers feeding passive satellites.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum power handling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 1.5mm² cross-sectional area handles continuous power loads typical of desktop PA systems and rehearsal room setups. For exact power ratings consult your amplifier's specifications and match cable CSA to the amplifier's output rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the SPK plugs compatible with NL4 Speakon sockets?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. SPK plugs are a different connector format to Neutrik Speakon NL4. This cable is for equipment fitted with SPK sockets. Check your amplifier and speaker rear panels before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe rubberised jacket provides some weather resistance for short-term outdoor use in dry conditions, but the cable is not rated for permanent outdoor installation or exposure to standing water. Bring the cable indoors after use.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313389953291,"sku":"190.191UK","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190191UK_0.jpg?v=1784896039"},{"product_id":"citronic-classic-3m-speaker-cable-2-x-spk-plug-1-5mm","title":"Citronic Classic 3m Speaker Cable 2 x SPK Plug 1.5mm²","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic Classic is a 3m speaker cable terminated at both ends with latching SPK plugs, using 1.5mm² cross-section pure copper conductors housed in a rubberised jacket. The cable carries audio signal from an amplifier or powered mixer to a passive speaker, with the SPK connectors providing a latching grip on compatible sockets to prevent accidental disconnection during use.\u003c\/p\u003e\n\u003cp\u003eDesigned for studio monitor setups, small performance rigs and fixed installations where speaker runs are under 5m, the 3m length suits nearfield listening positions, desktop monitors paired with an audio interface, and compact PA setups where the amplifier sits close to the speaker stack. The latching SPK connectors twist-lock into place on compatible speaker sockets, holding the connection under movement and vibration without requiring screwdriver tightening.\u003c\/p\u003e\n\u003cp\u003eThe cable uses two conductors of 50-strand 0.17mm diameter pure copper wire, giving a combined cross-sectional area of 1.5mm² per conductor. This gauge handles up to 300W RMS per cable on typical 8Ω speaker loads without significant power loss over the 3m run. The rubberised outer jacket resists snags and kinks, and the cable includes internal cotton reinforcement to reduce conductor fatigue from repeated coiling and uncoiling.\u003c\/p\u003e\n\u003cp\u003eThe 7mm outer diameter makes the cable easy to route through cable trays, around desk legs and along skirting boards without excess bulk. The soft-touch rubberised finish reduces handling noise when the cable is moved during setup, making it suitable for studio environments where mechanical noise can interfere with recording sessions.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e7.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 50 strand, 0.17mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e2 x 1.5mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x SPK plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power can this cable handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 1.5mm² conductor gauge is rated for up to approximately 300W RMS per cable on typical 8Ω speaker loads over a 3m run. Higher loads or lower impedances may require a thicker cable to avoid power loss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the SPK connectors compatible with all speaker sockets?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSPK connectors fit standard Speakon-compatible sockets found on most modern passive PA speakers and powered monitors. Check your speaker's input panel for a circular four-pin socket with a twist-lock mechanism. The connectors are not compatible with screw-terminal or 6.35mm jack inputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used for bi-wiring?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This cable has two conductors (positive and negative) and is designed for standard single-wire speaker connections. Bi-wiring requires two separate cables or a dedicated four-conductor cable with compatible terminations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between 1.5mm² and 2.5mm² speaker cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2.5mm² cable has a larger cross-sectional area and lower resistance, which reduces power loss over longer runs and allows higher wattages to be carried without heat buildup. For runs under 5m and power levels under 300W, 1.5mm² is sufficient. Runs over 10m or power levels above 500W benefit from 2.5mm² or thicker.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313389986059,"sku":"190.192UK","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190192UK_0.jpg?v=1784896052"},{"product_id":"citronic-classic-6m-speaker-cable-dual-spk-plug-1-5mm","title":"Citronic Classic 6m Speaker Cable - Dual SPK Plug 1.5mm²","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic Classic 6m speaker cable connects passive loudspeakers to amplifiers via two SPK plugs, one at each end. Each conductor carries 1.5mm² cross-sectional area made from 50-strand 0.17mm pure copper wire, providing low-resistance signal transmission for speaker-level audio. The dual-latch SPK connectors provide a secure friction-grip connection compatible with SPK chassis sockets on PA speakers, studio monitors and amplifier outputs.\u003c\/p\u003e\n\u003cp\u003eDesigned for mobile DJ setups, rehearsal spaces, small-to-medium live venues and home studios where speakers are positioned 3-6m from the amplifier. The 7mm-diameter rubberised jacket is soft enough to coil without memory kinks but tough enough to handle repeated packing, transport and setup. Cotton-reinforced internal construction reduces conductor breakage from flexing at plug entry points, a common failure mode in cheaper speaker cables subjected to weekly use.\u003c\/p\u003e\n\u003cp\u003eThe 6m length suits typical stage-to-speaker runs in function rooms, small halls and pub venues, leaving enough slack for amplifier placement behind a DJ booth or on a back table. The cable supports continuous full-range audio from PA amplifiers up to several hundred watts without signal degradation, with the 1.5mm² copper cross-section matching the cable gauge recommendation for speaker runs under 10m. Machine-assembled SPK connectors provide consistent contact pressure and strain relief at both ends.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e6.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e7.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 50 strand, 0.17mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e2 x 1.5mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x SPK plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speakers is this compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SPK plugs fit chassis sockets on passive PA speakers, studio monitors and powered speakers with SPK inputs. The connectors use a dual-pin latching design that locks into compatible SPK sockets found on AVSL, Citronic, QTX and many other PA speaker brands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power handling does the 1.5mm² gauge support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 6m length, the 1.5mm² copper conductors handle several hundred watts of amplifier output without significant voltage drop or signal loss. For very high-power systems above 500W per channel, 2.5mm² cable is recommended, but 1.5mm² is appropriate for most mobile DJ and small venue setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable directional?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Speaker cable is non-directional. Either end can connect to the amplifier or the speaker. The SPK plugs are identical at both ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for stage lighting DMX?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is speaker cable designed for audio transmission. DMX lighting control requires dedicated 3-pin or 5-pin XLR cable with correct impedance characteristics. Using speaker cable for DMX will cause signal errors and control failures.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313390018827,"sku":"190.193UK","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190193UK_0.jpg?v=1784896067"},{"product_id":"citronic-classic-12m-speaker-lead-spk-to-spk-1-5mm","title":"Citronic Classic 12m Speaker Lead SPK to SPK - 1.5mm²","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic Classic is a 12m speaker lead built with 1.5mm² cross-sectional area pure copper conductors running through a cotton-reinforced rubberised outer jacket. Each end terminates in a latching SPK plug that clicks into place on compatible powered speakers, passive cabinets and amplifier outputs, maintaining a secure connection during transport and live use.\u003c\/p\u003e\n\u003cp\u003eDesigned for PA systems, touring rigs and fixed installation where the distance between amplifier and speaker exceeds 6m, the 12m length suits medium venue setups, outdoor events and multi-speaker arrays where the amplifier sits at FOH or back-of-stage. The cable diameter of 7mm balances flexibility for coiling with enough rigidity to resist kinking when run across floors or stage risers.\u003c\/p\u003e\n\u003cp\u003eThe cotton reinforcement inside the rubberised jacket adds tensile strength without adding bulk, allowing the cable to withstand repeated wrapping and unwrapping on a cable drum. The soft-touch outer surface reduces grip slip when handling during setup and strike, and resists tangling when stored in a flight case. The dual 50-strand pure copper conductors (2 x 1.5mm²) handle continuous power from amplifiers rated up to 800W RMS at 8Ω without signal degradation across the 12m run.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e12.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e7.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 50 strand, 0.17mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e2 x 1.5mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x SPK plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power rating does the cable support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 1.5mm² CSA pure copper conductors handle continuous power up to approximately 800W RMS at 8Ω across the 12m length without significant signal loss. For higher-power applications (1kW+), consider upgrading to a 2.5mm² cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the SPK connectors compatible with SpeakON?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. SPK and SpeakON are different connector standards. SPK plugs work with SPK sockets, commonly found on older PA cabinets, some powered speakers and certain amplifier outputs. SpeakON requires a different connector type.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the cable stored without kinking?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCoil the cable in over-under loops rather than straight wraps to prevent twist build-up. The cotton-reinforced jacket resists kinking but will retain tight bends if wrapped incorrectly. Store on a cable drum or loosely coiled in a flight case.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe rubberised jacket provides some weather resistance for temporary outdoor use (festivals, garden events), but the cable is not rated for permanent outdoor installation or submersion. Keep connectors off wet ground and dry thoroughly after use in damp conditions.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313390444811,"sku":"190.194UK","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190194UK_0.jpg?v=1784896079"},{"product_id":"citronic-classic-20m-speaker-cable-spk-plug-to-spk-plug-1-5mm","title":"Citronic Classic 20m Speaker Cable SPK Plug to SPK Plug - 1.5mm²","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic Classic is a 20m speaker cable fitted with latching SPK plugs at both ends, designed to connect passive speakers to amplifiers or powered speakers to passive satellites in PA and stage systems. The cable uses 2 x 1.5mm² cross-sectional area conductors, each comprising 50 strands of 0.17mm pure copper wire, giving a total conductor count of 100 strands per cable.\u003c\/p\u003e\n\u003cp\u003eBuilt for mobile DJ setups, live sound reinforcement and installed PA systems where speaker runs exceed 10m, the 20m length handles larger venues, outdoor events and multi-room installations without needing mid-run joins. The latching SPK connectors twist-lock into compatible speaker and amplifier sockets, preventing accidental disconnection during transport or performance. The 7mm outer diameter cable strikes a balance between flexibility for coiling and cable management, and physical robustness for regular setup\/breakdown cycles.\u003c\/p\u003e\n\u003cp\u003eThe pure copper conductors reduce resistance over the 20m run compared to copper-clad aluminium alternatives, maintaining signal integrity and reducing power loss between amplifier and speaker. Internal cotton reinforcement adds tensile strength to resist stretching or tearing when the cable is pulled through cable runs or over stage edges. The rubberised outer jacket provides abrasion resistance and remains flexible in temperatures down to typical UK winter outdoor conditions.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e20.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e7.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003e2 x 50 strand, 0.17mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e2 x 1.5mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x SPK plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ctable style=\"width: 100%; height: 98px;\" class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 30.23%; height: 19.6px;\"\u003eCable : diameter\u003c\/td\u003e\n\u003ctd style=\"width: 67.4089%; height: 19.6px;\"\u003e7.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 30.23%; height: 19.6px;\"\u003eConductors\u003c\/td\u003e\n\u003ctd style=\"width: 67.4089%; height: 19.6px;\"\u003e2 x 50 strand, 0.17mmØ pure copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 30.23%; height: 19.6px;\"\u003eConnectors\u003c\/td\u003e\n\u003ctd style=\"width: 67.4089%; height: 19.6px;\"\u003e2 x SPK plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 30.23%; height: 19.6px;\"\u003eCSA\u003c\/td\u003e\n\u003ctd style=\"width: 67.4089%; height: 19.6px;\"\u003e2 x 1.5mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 30.23%; height: 19.6px;\"\u003eLength\u003c\/td\u003e\n\u003ctd style=\"width: 67.4089%; height: 19.6px;\"\u003e20.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat equipment does this cable connect?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SPK plugs fit SPK sockets commonly found on passive PA speakers, powered speakers with satellite outputs, and power amplifiers with SPK speaker outputs. The cable is designed for speaker-level signals, not line-level or instrument signals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs 1.5mm² adequate for a 20m run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor typical 8-ohm passive speakers and amplifier outputs between 200-500W, 1.5mm² copper conductors over 20m provide acceptable resistance and minimal power loss. For higher-power applications or 4-ohm loads, consider stepping up to 2.5mm² cable to reduce resistance further.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the SPK connectors compatible with SpeakON?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. SPK plugs and SpeakON (Neutrik NL4) are different connector systems and are not mechanically compatible. Check your equipment's socket type before purchasing. If your speakers use SpeakON sockets, you need a cable with SpeakON connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe rubberised jacket provides basic weather resistance for temporary outdoor use during dry conditions. For permanent outdoor installation or wet environments, use IP-rated connectors and conduit protection. The cable itself is not IP-rated.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313392115979,"sku":"190.242UK","price":25.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/190242UK_0.jpg?v=1784896093"},{"product_id":"mercury-3-gang-remote-extension-lead-with-usb-a-usb-c-1m-white","title":"Mercury Extension Lead with USB-A and USB-C Ports","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury is a 3-gang extension lead with individual remote control of each socket, plus two USB-A and one USB-C charging port built into the end panel. Each of the three 13A mains sockets can be switched on or off independently using the included remote control, which operates at 433MHz over a range of up to 30m through walls and furniture.\u003c\/p\u003e\n\u003cp\u003eDesigned for controlling appliances in hard-to-reach positions or for users with limited mobility, the Mercury suits TV cabinets, home entertainment systems, desk setups and bedroom electronics where manually reaching behind furniture to switch off standby devices is impractical. The remote allows appliances to be powered down completely rather than left on standby, reducing energy waste and lowering fire risk from unattended devices.\u003c\/p\u003e\n\u003cp\u003eThe white plastic housing measures 290mm long by 60mm wide by 30mm deep, with a 1m mains cable terminating in a standard UK 3-pin plug. The three mains sockets are rated to 13A total load across the extension lead, with overload, overcurrent and surge protection built into the circuitry. The USB-A ports deliver up to 2.4A per port at 5V, while the USB-C port supports standard 5V charging. Total combined USB output is capped at 4.5A across all three ports.\u003c\/p\u003e\n\u003cp\u003eEach socket has a red LED indicator showing when it is powered, making it easy to confirm which outlets are live when using the remote. The remote control uses a CR2032 battery (included) and has separate buttons for each of the three socket groups, plus an all-on and all-off function. The Mercury conforms to BS1363\/A and BS5733A standards for UK household electrical accessories.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e230-240V~\/50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. load\u003c\/td\u003e\n\u003ctd\u003e13A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. current\u003c\/td\u003e\n\u003ctd\u003e4.5A, 5V ( total 3 USB charging ports), Max.2.4A, 5V( single USB charging port)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003e3x UK Mains, 2x USB Type-A, 1x USB Type-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003e1.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e290mm x 60mm x 30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.65KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission frequency\u003c\/td\u003e\n\u003ctd\u003e433MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable type\u003c\/td\u003e\n\u003ctd\u003e3 core 1.25mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/429952UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow far does the remote control work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe remote operates at 433MHz with a stated range of up to 30m. In practice, this depends on wall construction and obstacles between the remote and the extension lead. Brick walls and metal furniture reduce effective range more than plasterboard partitions or wooden furniture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan each socket be controlled separately?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each of the three mains sockets has its own button on the remote control, allowing individual on\/off switching. The remote also has an all-on and all-off function for controlling all three sockets simultaneously.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the total load limit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe extension lead is rated to 13A total load across all three mains sockets combined. This equates to approximately 3,000W at 230V. Do not exceed this total load even if individual appliances are rated below 13A each.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the USB charging output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe two USB-A ports and one USB-C port deliver 5V output, with a maximum of 2.4A per port and a combined total of 4.5A across all three USB ports. The USB-C port does not support fast-charge protocols beyond standard 5V output.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313443922187,"sku":"429.952UK","price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/429952UK_0.jpg?v=1784898142"},{"product_id":"qtx-3-5mm-stereo-jack-plug-6mm-cable-black-metal-body-gold-contacts","title":"QTX 3.5mm Stereo Jack Cable, Gold Contacts","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX 3.5mm stereo jack plug is a solder-type connector with a black metal body, gold-plated contacts and a threaded housing that accepts cables up to 6mm diameter. The plug provides a tip, ring and sleeve connection for stereo audio signals, commonly used to terminate headphone cables, auxiliary audio leads and patch cables for mixers, amplifiers and consumer electronics.\u003c\/p\u003e\n\u003cp\u003eDesigned for DIY cable assembly and repair work, the threaded housing unscrews to expose the internal contacts for soldering. Once the cable is soldered to the tip (left channel), ring (right channel) and sleeve (ground) contacts, the housing threads back over the cable and contact assembly, providing strain relief at the point where the cable enters the plug. The 6mm cable entry accommodates most standard audio cable outer diameters including shielded twin-core and multi-strand speaker wire.\u003c\/p\u003e\n\u003cp\u003eThe black metal body is lightweight at 10g and measures 46mm from tip to cable entry, with a 12mm diameter housing that fits standard 3.5mm jack sockets. The gold-plated contacts resist oxidation and maintain conductivity over repeated insertion cycles. This is a passive connector with no active components. Signal quality depends on the cable used and the quality of the solder joints made during assembly.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e46mm x 12mm x 12mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.01KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat tools are needed to fit this plug?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou will need a soldering iron (25-40W recommended), solder (rosin-core electronics solder), wire strippers, and a small pair of pliers or a bench vice to hold the plug steady while soldering. A multimeter is useful for checking continuity after assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable diameter does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe threaded housing accepts cables up to 6mm outer diameter. This covers most standard headphone cables, aux leads and shielded audio cables. Thicker cables will not fit through the strain relief housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the contacts pre-tinned?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The gold-plated contacts are not pre-tinned. You will need to tin both the cable ends and the plug contacts with solder before making the final joint to ensure a reliable electrical connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for mono signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. For mono use, solder the signal wire to the tip contact and the ground to the sleeve, leaving the ring contact unconnected. This configuration is common for mono instrument cables and microphone leads using 3.5mm jacks.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313475543307,"sku":"752.687UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/752687UK_0.jpg?v=1784899059"},{"product_id":"qtx-3-pin-xlr-plug-short-body-cable-mount","title":"QTX 3 Pin XLR Plug Short Body - Cable Mount","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe QTX 3-pin XLR plug is a cable-mount connector with a short body design, plastic strain relief sleeve and integrated cable protector. The connector accepts cables up to 8mm in diameter and uses a screw-down cable clamp to secure the outer sheath once the internal conductors are soldered to the three pins.\u003c\/p\u003e\n\u003cp\u003eDesigned for field termination of balanced audio cables in live sound, studio and installation work, the short body reduces the overall length of the terminated connector, making it easier to fit into tight back-of-rack spaces and cable looms. The plastic outer shell protects the internal solder joints and pin assembly from impact damage during touring and live events.\u003c\/p\u003e\n\u003cp\u003eThe three-pin configuration carries balanced audio signal using pins 1 (ground\/shield), 2 (hot\/positive) and 3 (cold\/negative), following standard XLR wiring conventions. The connector mates with standard 3-pin XLR sockets on mixing consoles, amplifiers, active speakers and other pro audio equipment. The strain relief clamp grips the cable jacket to prevent flex damage at the solder points.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eXLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable diameter does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector accepts cables up to 8mm in outer diameter. This includes most standard microphone cables, DMX cables and line-level audio cables used in professional installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the cable terminated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe three internal pins are soldered to the cable conductors (hot, cold and ground). Once soldered, the cable jacket is clamped in the strain relief section and the outer shell is screwed together to seal the assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the plug or the socket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the plug (male connector) with three pins that insert into a female XLR socket. In standard audio wiring, the plug is fitted to the cable carrying signal from a source (microphone, mixer output) and the socket is on the receiving device (mixer input, amplifier).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 'short body' mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe short body design reduces the overall length of the connector compared to standard XLR plugs, making it easier to fit into congested equipment racks and cable bundles where space behind panels is limited.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313477837067,"sku":"761.627UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/761627UK_0.jpg?v=1784899304"},{"product_id":"neutrik-nl4fxx-w-s-speakon-4-pole-cable-plug-6-12mm","title":"Neutrik NL4FXX-W-S Speakon 4 Pole Cable Plug 6-12mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Neutrik NL4FXX-W-S is a 4-pole Speakon cable plug with screw-type terminals and chuck strain relief, designed for cables between 6mm and 12mm diameter. The connector carries up to 37A RMS per contact and uses Neutrik's twist-lock system to secure the connection against accidental disconnection during live performance or installation work.\u003c\/p\u003e\n\u003cp\u003eUsed in professional audio installations, live sound reinforcement and touring rigs, the NL4FXX-W-S terminates speaker cables running from amplifiers to passive loudspeakers. The screw terminals accept stranded copper cable up to 2.5mm² cross-section and provide a gas-tight connection that resists oxidation over time. The chuck-type strain relief grips the outer cable jacket without requiring additional cable glands or heat shrink.\u003c\/p\u003e\n\u003cp\u003eThe two-component housing combines a hard grey body with a green soft-touch grip section, giving a secure hold when inserting or removing the connector under stage or rigging conditions. The improved kink protection at the cable entry reduces stress on the conductors during repeated coiling and uncoiling. The IP20 rating provides basic protection against solid objects above 12mm but is not sealed against moisture, so outdoor use requires additional weatherproofing at the connection point.\u003c\/p\u003e\n\u003cp\u003eNeutrik Speakon connectors are the global standard for loudspeaker connections in professional audio, with cross-compatibility across all major amplifier and loudspeaker manufacturers. The NL4FXX-W-S is typically rated for 5,000 mating cycles and operates across a -33°C to +80°C temperature range, covering both cold-weather outdoor events and high-temperature amplifier rack environments.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : dimensions\u003c\/td\u003e\n\u003ctd\u003e6 -12mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContact resistance\u003c\/td\u003e\n\u003ctd\u003e≤ 2 mΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLifetime\u003c\/td\u003e\n\u003ctd\u003eTypically 5’000 mating cycles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminals\u003c\/td\u003e\n\u003ctd\u003eScrew type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003e-33°C to +80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable size does the NL4FXX-W-S accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector fits cables between 6mm and 12mm outer diameter. The screw terminals accept stranded conductors up to 2.5mm² cross-section. Speaker cable in the 2.5mm² to 4mm² range typically falls within the 6-12mm outer diameter when jacketed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the current rating per contact?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach of the four contacts is rated at 37A RMS. In a typical bi-amp configuration using contacts 1+\/1- for low frequency and 2+\/2- for high frequency, both pairs can carry 37A simultaneously without exceeding thermal limits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this plug compatible with all Speakon sockets?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The NL4FXX-W-S 4-pole plug mates with any Neutrik Speakon chassis socket (NL4MP, NL4MDV, NL4MMX) and is backwards-compatible with 2-pole Speakon sockets, where only contacts 1+\/1- will make connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating provides no moisture protection, so the connector is not weatherproof on its own. Outdoor installations require the mated connection to be housed inside a sealed enclosure or protected with a rubber boot or shroud to prevent water ingress.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313478754571,"sku":"763.481UK","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/763481UK_0.jpg?v=1784899408"},{"product_id":"neutrik-nl2fxx-w-s-speakon-2-pole-cable-connector-screw-terminals","title":"Neutrik NL2FXX-W-S 2 Pole Screw Terminal Speakon Connector","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Neutrik NL2FXX-W-S is a 2-pole Speakon cable connector with screw-type terminals and a chuck-style strain relief designed for speaker cables between 6-12mm diameter. The connector handles up to 37A RMS on mains-voltage speaker feeds and uses Neutrik's twist-lock latching system to prevent accidental disconnection during live performance or fixed installation use.\u003c\/p\u003e\n\u003cp\u003eDesigned for professional audio applications where cable runs terminate at powered speakers, passive cabinets, or amplifier outputs, the NL2FXX mates with both 2-pole and 4-pole Speakon chassis connectors using contacts +1 and -1. The screw terminals accept stranded or solid core cable up to 4mm² and include wire protection inserts that prevent strand damage during tightening. The chuck-type strain relief grips the cable jacket along its circumference rather than pinching from two sides, distributing mechanical stress more evenly and reducing the risk of kinking at the connector body.\u003c\/p\u003e\n\u003cp\u003eThe two-component moulded housing combines a hard outer shell with a rubberised grip section, giving a slip-proof surface when connecting or disconnecting under stage lighting or in rack-mounted amplifier bays. The housing carries an IP20 ingress protection rating and operates across -33°C to +80°C, making it suitable for outdoor festival rigs in summer and winter touring applications. The contact resistance is specified at ≤2mΩ and the connector is rated for typically 5,000 mating cycles before mechanical wear becomes measurable.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eContact resistance\u003c\/td\u003e\n\u003ctd\u003e≤ 2 mΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e6-12mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLifetime\u003c\/td\u003e\n\u003ctd\u003eTypically 5’000 mating cycles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminals\u003c\/td\u003e\n\u003ctd\u003eScrew type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003e-33°C to +80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable size does this connector accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NL2FXX accepts speaker cables with an outer jacket diameter between 6mm and 12mm. The screw terminals handle conductor sizes up to 4mm² (approximately 12AWG). The chuck-type strain relief grips the cable jacket, so ensure your cable falls within the 6-12mm range for secure retention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with 4-pole Speakon sockets?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 2-pole NL2FXX connector mates with both 2-pole and 4-pole Speakon chassis connectors, using contacts +1 and -1. This makes it compatible with most powered speakers and passive cabinets that use Speakon inputs, regardless of whether the socket is 2-pole or 4-pole.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat current rating does it carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NL2FXX is rated at 37A RMS for mains-voltage speaker applications. This is sufficient for high-power amplifier outputs driving passive cabinets or for powered speakers with internal amplifiers rated up to several kilowatts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the cable secured in the connector?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector uses a chuck-type strain relief that grips the cable jacket evenly around its circumference when the rear housing is tightened. This distributes mechanical stress better than clamp-style strain reliefs and reduces the risk of kinking. The screw terminals hold the conductors separately.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313479016715,"sku":"763.483UK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/763483UK_0.jpg?v=1784899439"},{"product_id":"mercury-dc-power-splitter-cable-2-1mm-socket-to-4-x-2-1mm-plugs","title":"Mercury DC Power Splitter Cable - 2.1mm Socket to 4 x 2.1mm Plugs","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury DC power splitter cable connects one 2.1mm DC socket to four 2.1mm DC jack plugs, allowing a single 12V power supply to run up to four low-voltage devices simultaneously. The cable measures 400mm from the female socket to the furthest plug, with the four output plugs spaced evenly along the branching cable to reduce clutter behind equipment racks or under pedalboards.\u003c\/p\u003e\n\u003cp\u003eDesigned for LED tape installations, CCTV camera arrays, guitar and effects pedalboards, and similar low-voltage 12V DC systems where multiple devices need to share a single power supply. Each of the four output plugs carries the same voltage as the input socket, so the cable acts as a simple distribution splitter rather than a voltage converter or regulator. The 3A maximum current rating applies to the total combined draw across all four outputs, not per plug.\u003c\/p\u003e\n\u003cp\u003eThe moulded connectors on both the input socket and the four output plugs provide strain relief where the cable enters the connector body, reducing the risk of cable fracture at the connection points. The flexible black cable jacket allows the splitter to be routed behind equipment without kinking. All connectors use the standard 2.1mm centre-positive barrel jack configuration common to most 12V DC power supplies and devices.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e400mm x 20mm x 10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.04KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent max.\u003c\/td\u003e\n\u003ctd\u003e3A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum current per output plug?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3A maximum current rating is a combined total across all four outputs, not per plug. If one device draws 2A, the remaining three outputs can share the remaining 1A. For example, four devices each drawing 0.5A would total 2A and stay within the 3A limit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the polarity centre-positive or centre-negative?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable itself does not determine polarity. It passes through whatever polarity the power supply provides. Most 12V DC supplies and devices use centre-positive (tip positive, barrel negative), but always verify the polarity of both the supply and the devices before connecting to avoid damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used with 9V or 24V supplies?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, as long as the voltage is consistent between the supply and all four connected devices, and the combined current draw stays under 3A. The cable is rated for low-voltage DC applications and does not convert or regulate voltage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens if one device draws more than 3A total?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eExceeding the 3A rating can overheat the cable and damage the connectors. If your devices require more than 3A combined, use a higher-rated splitter or run a second power supply with a separate splitter cable.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313482457355,"sku":"777.002UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/777002UK_rb0.jpg?v=1785077986"},{"product_id":"mercury-fig-8-speaker-cable-2-x-7-strand-grey-black-100m-reel","title":"Mercury Fig 8 Speaker Cable 2 x 7 Strand Grey\/Black - 100m Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Fig 8 speaker cable is a flexible twin-core cable with 2 x 7 strand conductors combining four copper and three copper-clad aluminium strands per core, giving a 0.18mm² cross-sectional area. The grey PVC sheath includes a black polarity line running along one core to simplify positive\/negative identification during installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and light commercial audio installations where standard speaker runs are needed between amplifiers and passive speakers, the cable handles loads up to 1.0A maximum continuous current. The figure 8 profile with a 1.8 x 3.6mm footprint allows the cable to be run along skirting boards, under carpets or through conduit without excessive bulk. The polarity marking removes the need to mark or test cores during termination.\u003c\/p\u003e\n\u003cp\u003eThe 100m reel length suits whole-home audio installs, multi-room distributed systems, and commercial background music setups where multiple speaker runs are needed from a single roll. The mixed copper\/CCA construction keeps cost down for projects where conductor purity is less critical than total length coverage. The cable can be terminated with standard bare wire, spade or pin connectors depending on the amplifier and speaker binding posts in use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e1.0A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e1.8mm x 3.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (4 x 0.18mmØCu + 3 x 0.18mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.18mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum speaker run length for this cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 0.18mm² CSA and 1.0A maximum rating suit short to medium runs, typically up to 10-15 metres per speaker for 8-ohm loads at moderate power levels. Longer runs or higher-power systems may need thicker cable to avoid voltage drop affecting sound quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the black polarity line indicate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe black line runs along one of the two cores to mark polarity, allowing consistent positive\/negative termination at both the amplifier and speaker ends without needing a multimeter or separate marking during installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe grey PVC sheath is designed for indoor use. For outdoor speaker runs the cable should be protected inside conduit or trunking to shield it from UV, moisture and temperature extremes that can degrade the insulation over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between copper and copper-clad aluminium strands?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper-clad aluminium (CCA) strands have an aluminium core with a thin copper coating, reducing material cost compared to pure copper. CCA offers lower conductivity than pure copper, which is why this cable is rated for 1.0A maximum and suits lower-power or shorter-run applications.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313495269643,"sku":"801.050UK","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801050UK_0.jpg?v=1784900600"},{"product_id":"mercury-fig-8-speaker-cable-2-x-7-strand-0-18mm-black-white-100m-reel","title":"Mercury Fig 8 Black Speaker Cable Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury figure 8 speaker cable uses two parallel 7-strand conductors in a flat configuration, each core combining 4 copper strands and 3 copper-clad aluminium strands for a 0.18mm² cross-sectional area. The cable has a black PVC sheath on one core and a white polarity line on the second, making it straightforward to maintain correct phase when wiring multiple speakers or running long parallel runs.\u003c\/p\u003e\n\u003cp\u003eDesigned for light-duty audio installations where runs do not exceed 10-15m per speaker and power handling stays below 50W, the cable suits background music systems, small PA setups, multi-room audio distribution and budget home hi-fi. The figure 8 profile makes the cable easy to route along skirting boards, under carpets or through cable trays without the stiffness of round twin-core cable. The 100m reel provides enough length for a typical 4-6 zone commercial audio system or a domestic whole-house distribution with sensible routing.\u003c\/p\u003e\n\u003cp\u003eThe 2.0 x 4.0mm flat profile is thin enough to fit behind most wall plates and under doors without creating trip hazards or visible floor bulges. The copper\/CCA conductor blend keeps cost down while maintaining acceptable conductivity for the 1.0A maximum current rating. For runs longer than 15m or higher-power applications, a thicker cable (0.5mm² or 0.75mm²) is recommended to avoid voltage drop and power loss.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e1.0A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2.0mm x 4.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (4 x 0.18mmØCu + 3 x 0.18mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.18mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum speaker distance this cable can handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor speakers up to 50W, keep runs under 10-15m to avoid voltage drop. Beyond 15m or for higher-power speakers, use a thicker cable with 0.5mm² or 0.75mm² CSA to maintain signal quality and power delivery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the white polarity line indicate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe white line runs along one of the two cores, marking it as the positive conductor. Use this consistently across all speakers in a system to maintain correct phase and avoid cancellation when speakers are paired or grouped.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PVC sheath is not UV-stabilised or waterproof. For outdoor speaker runs, use cable rated for external use or run this cable inside conduit to protect it from UV degradation and moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between copper and CCA conductors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper-clad aluminium (CCA) has an aluminium core with a thin copper coating. It's lighter and cheaper than pure copper but has slightly higher resistance. The Mercury cable uses a mix of both to balance cost and performance for light-duty audio applications.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313495302411,"sku":"801.053UK","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801053UK_0.jpg?v=1784900614"},{"product_id":"mercury-figure-8-speaker-cable-2-x-7-strand-white-black-100m-reel","title":"Mercury Figure 8 Two-Core Speaker Cable Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury figure 8 speaker cable uses a 2 x 7 strand construction with mixed copper and copper-clad aluminium (CCA) conductors inside a white PVC sheath. One side of the cable carries a black polarity line running the full length, making it straightforward to maintain correct phase across multiple speaker runs without needing to strip back the sheath to check conductor colour.\u003c\/p\u003e\n\u003cp\u003eDesigned for background music systems, multi-room audio installs, and distributed speaker networks where cable runs terminate behind walls or above ceilings, the 0.18mm² cross-sectional area suits speaker runs up to approximately 10-15m at 8Ω impedance without significant signal loss. The figure 8 profile keeps both conductors parallel and reduces the chance of accidentally pulling cores apart during installation compared to twin-and-earth style cables.\u003c\/p\u003e\n\u003cp\u003eThe 100m reel format provides enough cable for a typical four- to six-room distributed audio project with some spare for patching and fault correction. The mixed copper\/CCA conductor composition balances cost with conductivity. Pure copper strands handle the majority of the signal path while CCA strands reduce overall cable weight and material cost. Maximum current rating of 1.0A makes this cable suitable for low- to moderate-power amplifiers driving ceiling speakers, bookshelf speakers and wall-mounted units in commercial and residential settings.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e1.0A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e1.8mm x 3.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (4 x 0.18mmØCu + 3 x 0.18mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.18mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speaker runs is this cable suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 0.18mm² CSA suits runs up to 10-15m at 8Ω speaker impedance without significant signal loss. For longer runs or lower impedance speakers (4Ω), consider a heavier-gauge cable to maintain signal integrity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the black polarity line indicate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe black line runs along one side of the white sheath, marking the negative or return conductor. This allows installers to maintain correct phase across multiple speaker runs without needing to strip the sheath to check internal conductor colours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be buried in walls or run above ceilings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable is designed for concealed installation in residential and commercial settings. However, it is not fire-rated to BS EN standards for plenum or fire-alarm-grade installations. Check local building regulations before burying cable in walls.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is CCA and how does it affect performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper-clad aluminium is an aluminium core with a thin copper coating. It reduces cable weight and cost compared to pure copper but has slightly lower conductivity. In this cable, the mix of 4 copper strands and 3 CCA strands per core balances performance and cost for distributed audio applications.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313495335179,"sku":"801.056UK","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801056UK_0.jpg?v=1784900628"},{"product_id":"mercury-fig-8-speaker-cable-2-x-13-strand-grey-black-100m-reel","title":"Mercury Fig 8 Speaker Cable 2 x 13 Strand Grey\/Black - 100m Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury fig 8 speaker cable is a 100m reel of 2-core speaker cable with 13 strands per conductor, combining copper and copper-clad aluminium (CCA) construction. The cable uses a figure-8 profile with a grey PVC sheath and a black polarity line running down one side, making it straightforward to maintain correct phase connections when wiring multiple speakers.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and light commercial audio installations, the cable suits in-wall runs to ceiling speakers, background music systems in retail or hospitality, and home cinema surround installations where cable is concealed behind plasterboard or run under carpets. The 0.33mm² cross-sectional area supports runs up to approximately 10m per speaker at 8Ω impedance without significant signal loss, and the 2.5A maximum current rating handles standard domestic speaker loads comfortably.\u003c\/p\u003e\n\u003cp\u003eEach conductor contains 7 strands of 0.18mm copper wire and 6 strands of 0.18mm copper-clad aluminium wire, giving flexibility for routing around corners and through joists while maintaining a consistent 2.0 x 4.0mm cable profile. The grey sheath is flame-retardant PVC rated for permanent in-wall installation under UK building regulations. The 100m reel length allows for multiple speaker runs from a single spool without joins.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e2.5A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2.0mm x 4.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (7 x 0.18mmØCu + 6 x 0.18mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.33mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length speaker run does this cable support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor 8Ω speakers, runs up to 10m per speaker maintain good signal integrity with minimal loss. Longer runs are possible but may benefit from a thicker cable gauge depending on the amplifier and speaker specifications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this cable suitable for in-wall installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The grey PVC sheath is flame-retardant and rated for permanent installation behind plasterboard, through ceiling voids and under floors in accordance with UK building regulations for low-voltage audio wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the polarity line for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe black line running down one conductor helps maintain correct phase when wiring multiple speakers. Consistently connecting the marked conductor to the positive terminal on both the amplifier and speaker ends ensures all speakers move in phase, which is critical for sound quality in stereo and surround systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does the cable use copper-clad aluminium as well as copper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe hybrid construction reduces cost while maintaining adequate conductivity for short to medium speaker runs. The copper strands provide the core conductivity, while the CCA strands add flexibility and bulk to the cable without significantly compromising performance at domestic listening levels.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313495367947,"sku":"801.239UK","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801239UK_0.jpg?v=1784900643"},{"product_id":"mercury-figure-8-speaker-cable-2-x-13-strand-0-33mm-white-black-100m","title":"Mercury Figure 8 Twin-Core Speaker Cable Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury is a figure 8 speaker cable with two parallel conductors, each containing 13 strands in a mixed copper and copper-clad aluminium (CCA) configuration. Each conductor has seven 0.18mm copper strands and six 0.18mm CCA strands, giving a combined cross-sectional area of 0.33mm² per core. The white PVC sheath carries a black line along one conductor to identify polarity when terminating.\u003c\/p\u003e\n\u003cp\u003eDesigned for background music systems, small PA installations and domestic hi-fi runs where cable is concealed in walls, under floors or within trunking, the 100m reel suits installation contractors and integrators working on medium-scale projects. The 2.0 x 4.0mm profile fits standard twin cable clips and conduit without excessive bulk. The 2.5A maximum current rating handles amplifier outputs up to approximately 60W RMS at 8 ohms over typical cable runs of 10-20m.\u003c\/p\u003e\n\u003cp\u003eThe mixed copper\/CCA conductor construction balances cost and conductivity. The seven copper strands per core provide the majority of the conductivity, while the six CCA strands add strand count and flexibility without the full material cost of pure copper. The figure 8 profile keeps both conductors parallel throughout the run, reducing the risk of phase mismatch or signal imbalance when cables are cut to length and stripped on-site.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e2.5A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2.0mm x 4.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (7 x 0.18mmØCu + 6 x 0.18mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.33mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat amplifier power can this cable handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2.5A maximum current rating supports amplifier outputs up to approximately 60W RMS at 8 ohms over cable runs of 10-20m. Higher wattage or longer runs will require a heavier gauge cable to avoid voltage drop and potential overheating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I identify polarity when terminating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe white sheath carries a black line running along one of the two conductors. This marked conductor is typically used as the negative or common terminal, while the unmarked conductor connects to the positive or hot terminal. Consistent polarity across all speaker runs prevents phase cancellation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The white PVC sheath is not UV-stabilised or weatherproof. For outdoor speaker installations use a cable rated for external use or run this cable inside UV-resistant conduit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between copper and CCA strands?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper strands have higher conductivity than copper-clad aluminium (CCA), which is an aluminium core with a thin copper plating. The mixed construction in this cable uses seven copper strands per core for the majority of the conductivity, with six CCA strands adding flexibility and strand count at lower material cost. Pure copper cable would offer slightly better conductivity but at higher price.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313495433483,"sku":"801.330UK","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801330UK_0.jpg?v=1784900657"},{"product_id":"mercury-2-x-13-strand-figure-8-speaker-cable-0-33mm-100m-reel","title":"Mercury 2 x 13 Strand Figure 8 Speaker Cable 0.33mm² - 100m Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Standard Figure 8 speaker cable uses a twin-core flat design with 13 strands per core, split between 7 copper strands and 6 copper-clad aluminium strands. Each core measures 0.33mm² cross-sectional area and handles up to 2.5A continuous current, making the cable suitable for lower-power distributed audio systems, background music installations, and entry-level home speaker wiring.\u003c\/p\u003e\n\u003cp\u003eThe figure-8 profile keeps both cores joined in a single flat sheath that terminates cleanly into binding posts and spring terminals without needing to separate the cores along their length. A white polarity line runs along one edge of the black sheath, allowing installers to maintain consistent positive\/negative orientation across multiple speaker runs. The 100m reel length suits commercial audio jobs requiring cable runs across multiple rooms or zones.\u003c\/p\u003e\n\u003cp\u003eThe copper\/CCA conductor mix balances cost against performance for installations where the cable runs are relatively short and the speaker load is modest. The 2.0 x 4.0mm overall dimensions fit through standard cable trunking and can be surface-run along skirting or coving without excessive visual bulk. The black sheath keeps the cable unobtrusive against dark walls and floors.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e2.5A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2.0mm x 4.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (7 x 0.18mmØCu + 6 x 0.18mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.33mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speaker power can this cable handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 0.33mm² CSA and 2.5A maximum current rating make this cable suitable for speakers with nominal power handling up to around 20W RMS at 8 ohms. For higher-power systems or longer cable runs, a larger CSA cable is recommended to minimise resistance losses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between copper and CCA strands?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCCA (copper-clad aluminium) strands have an aluminium core with a thin copper coating, providing lower cost than pure copper but with higher resistance. This Mercury cable uses 7 pure copper and 6 CCA strands per core as a compromise between performance and price for budget audio installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is polarity marked?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA white line runs along one edge of the black sheath. This marks the positive conductor. Maintaining the same orientation at both ends of each cable run ensures correct phase between the amplifier and speaker.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be run outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable has a standard black PVC sheath suitable for indoor use. For outdoor runs the cable should be protected inside conduit or trunking to prevent UV degradation and moisture ingress.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313495466251,"sku":"801.333UK","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801333UK_0.jpg?v=1784900672"},{"product_id":"mercury-fig-8-speaker-cable-2-x-26-strand-grey-black-100m-reel","title":"Mercury Fig 8 Speaker Cable 2 x 26 Strand Grey\/Black - 100m Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Fig 8 speaker cable is a 100m reel of twin-core speaker cable with a figure-8 cross-section, combining 2 x 26 strand copper and copper-clad aluminium (CCA) conductors within a grey PVC sheath. Each conductor is built from 13 x 0.18mm copper strands and 13 x 0.1mm CCA strands, giving a combined cross-sectional area of 0.66mm² and a maximum current rating of 6A.\u003c\/p\u003e\n\u003cp\u003eDesigned for everyday audio wiring in domestic, commercial and light installation applications, the cable suits speaker runs up to 20m for background music systems, PA distribution, and home audio installations where high-power audiophile-grade cable is not required. The figure-8 format keeps both conductors together during installation, preventing tangling and simplifying cable management behind wall plates or under floors. The black polarity line running along one conductor identifies positive and negative terminals without needing to strip and inspect the conductors.\u003c\/p\u003e\n\u003cp\u003eThe grey sheath provides a neutral appearance against white walls and skirting boards, and the 2.5 x 5mm profile is low enough to be concealed under carpets or behind trunking without causing visible ridges. The 100m reel length covers most domestic or small commercial installations without requiring mid-run joints, which can introduce signal loss or impedance mismatches. The copper\/CCA hybrid conductor keeps the cable affordable while maintaining adequate conductivity for typical 8-ohm speaker loads at moderate power levels.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e6.0A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2.5mm x 5.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (13 x 0.18mmØCu + 13 x 0.1mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.66mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speaker impedance and power level does this cable suit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 0.66mm² CSA and 6A maximum current rating suit 8-ohm speakers at moderate power levels, typically up to 50-70W RMS per channel over runs of 10-20m. For higher-power systems or longer runs, a larger CSA cable would reduce resistance and signal loss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is polarity identified?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne conductor has a black polarity line running the full length of the cable along the outside of the grey sheath. This marks the positive conductor, allowing consistent polarity across multiple speaker connections without stripping the cable to inspect the conductors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PVC sheath is designed for indoor use. For outdoor speaker runs the cable should be run inside conduit or trunking to protect it from UV degradation and moisture ingress.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between copper and CCA conductors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper-clad aluminium (CCA) has an aluminium core with a thin copper coating. It's lighter and cheaper than pure copper but has higher resistance, which can introduce signal loss over long runs. This cable uses a hybrid construction with both copper and CCA strands, balancing cost and conductivity for typical domestic audio applications.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313495728395,"sku":"801.422UK","price":20.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801422UK_0.jpg?v=1784900686"},{"product_id":"mercury-heavy-duty-fig-8-speaker-cable-2-x-42-strand-white-black-100m","title":"Mercury Heavy Duty Fig 8 White Speaker Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Heavy Duty is a 100m reel of figure 8 speaker cable built around two parallel conductors, each containing 42 strands (22 x 0.18mm copper, 20 x 0.18mm copper-clad aluminium). The combined 1.32mm² cross-sectional area and hybrid copper\/CCA construction balance cost against conductivity for mid-to-long speaker cable runs in commercial audio, installed sound and residential multi-room systems.\u003c\/p\u003e\n\u003cp\u003eDesigned for permanent audio installations where cable runs exceed 10-15 metres, the Mercury Heavy Duty suits distributed ceiling speaker systems in bars, restaurants, retail environments and domestic multi-room setups where multiple speakers are wired back to a central amplifier. The 13A maximum current rating allows for safe use on higher-power amplifier zones, while the 4.5 x 9mm figure 8 profile can be surface-mounted, clipped into cable trunking or run behind plasterboard without requiring conduit.\u003c\/p\u003e\n\u003cp\u003eThe white sheath carries a black polarity line running the full length of one conductor, making it simple to maintain consistent phase across multiple speakers during installation. The figure 8 (twin flat) profile means the two conductors can be separated by hand without stripping tools when terminating into speaker binding posts or screw terminals. The 100m reel length suits larger installations without mid-run joins, reducing potential fault points compared to shorter pre-cut cable.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e13A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e4.5mm x 9.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (22 x 0.18mmØCu + 20 x 0.18mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e1.32mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between copper and copper-clad aluminium (CCA)?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper offers better conductivity than CCA, while CCA reduces weight and cost. This cable uses a hybrid construction with 22 copper strands and 20 CCA strands per conductor, balancing performance and value for typical installed audio applications. Pure copper cable is preferable for audiophile hi-fi systems or very long runs exceeding 30m.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speaker impedance and amplifier power does this suit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 1.32mm² CSA handles most 8-ohm and 4-ohm distributed speaker systems on runs up to 25-30m without significant voltage drop. For 100V line systems, consult the amplifier and speaker manufacturer's cable gauge recommendations based on total speaker load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the two conductors be separated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The figure 8 profile allows the two conductors to be pulled apart by hand along the join line, making it easy to terminate into separate binding posts or screw terminals without cutting through the insulation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe white PVC sheath is designed for indoor installation. For outdoor or exterior wall runs, use cable rated for outdoor\/UV exposure or install this cable inside UV-rated conduit to protect it from direct sunlight and moisture ingress.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313495793931,"sku":"801.513UK","price":49.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801513UK_0.jpg?v=1784900701"},{"product_id":"mercury-heavy-duty-figure-8-speaker-cable-2-x-42-strand-black-100m-reel","title":"Mercury Heavy Duty Figure 8 Speaker Cable Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury heavy duty figure 8 speaker cable is a 100m reel of 2-core parallel cable with 2 x 42 stranded conductors (22 copper + 20 copper-clad aluminium per core), delivering a combined 1.32mm² cross-sectional area. The black PVC sheath carries a white polarity line down one core to simplify positive\/negative identification during installation.\u003c\/p\u003e\n\u003cp\u003eBuilt for medium to high-power PA systems, distributed audio in commercial venues, and permanent AV installations where cable runs exceed 10-20m, the Mercury cable handles up to 13A continuous current. The figure 8 profile (4.5 x 9.0mm) allows the two cores to be easily separated at termination points for connection to binding posts, screw terminals or Speakon connectors, while the parallel construction keeps the cable flat and flexible for routing under carpets, along skirting or through cable trays.\u003c\/p\u003e\n\u003cp\u003eThe mixed copper\/CCA conductor construction balances conductivity and cost. The 22 pure copper strands per core provide low resistance for signal integrity, while the 20 CCA strands maintain mechanical strength and keep the cable lighter than solid copper equivalents. The 100m reel length suits large-scale installations and allows multiple speaker drops to be cut from a single reel without wastage.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e13A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e4.5mm x 9.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (22 x 0.18mmØCu + 20 x 0.18mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e1.32mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length speaker runs is this cable suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 1.32mm² CSA makes this cable suitable for runs up to 20-30m for 8-ohm speakers without significant signal loss. For longer runs or lower-impedance loads (4-ohm), consider stepping up to 2.5mm² cable to maintain power delivery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the two cores be separated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The figure 8 profile allows the two cores to be pulled apart at termination points for connection to separate positive and negative terminals, or the cable can be run as a pair and stripped together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between copper and CCA conductors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePure copper has lower resistance than copper-clad aluminium. This cable uses a hybrid. 22 copper strands per core for conductivity, plus 20 CCA strands for strength and weight reduction. The result is a cable that performs close to solid copper but costs less and weighs less on long runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for outdoor installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe black PVC sheath provides basic protection against moisture and abrasion, but this cable is not rated for direct burial or permanent outdoor exposure to UV. For outdoor PA systems, run the cable through conduit or use UV-resistant outdoor-rated speaker cable.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313495859467,"sku":"801.516UK","price":49.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801516UK_0.jpg?v=1784900715"},{"product_id":"mercury-heavy-duty-fig-8-speaker-cable-2-x-79-white-black-100m","title":"Mercury Heavy Duty Fig 8 Speaker Cable 2 x 79 White\/Black - 100m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury heavy duty figure 8 speaker cable is a 2.50mm² twin-conductor cable with 2 x 79 strands per core, combining 40 strands of copper and 39 strands of copper-clad aluminium (CCA) in each conductor. The white PVC sheath carries a black polarity marking line down one side to identify positive and negative during installation, and the figure 8 profile allows the cable to be split down the centre when terminating at connectors.\u003c\/p\u003e\n\u003cp\u003eDesigned for professional audio installation, PA systems and commercial sound distribution, the cable handles up to 25A maximum current and suits medium to long cable runs where flexibility and pulling ease matter. The 100m reel length covers typical room-to-room installations in commercial venues, schools, conference centres and multi-zone audio systems without requiring mid-run joints. The 5mm x 10mm cross-section fits standard cable glands and clips used in commercial installation.\u003c\/p\u003e\n\u003cp\u003eThe hybrid copper\/CCA construction keeps cost down while maintaining conductivity for audio signals. The copper strands carry the signal with minimal loss, while the CCA strands provide mechanical strength and reduce overall cable weight. The white sheath blends into ceilings and wall runs in office and hospitality environments, and the black polarity line remains visible even when the cable is pulled through conduit or clipped to trays.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e25A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e5.0mm x 10.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (40 x 0.18mmØCu + 39 x 0.18mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e2.50mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between copper and CCA conductors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper-clad aluminium (CCA) is an aluminium core with a thin copper coating. Pure copper offers better conductivity and lower resistance, but CCA reduces weight and cost while maintaining acceptable performance for speaker cable runs under 30 metres. This cable uses both. 40 pure copper strands and 39 CCA strands per core. Balancing performance and economy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the two cores be separated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The figure 8 profile allows the cable to be split down the centre join when terminating at speaker terminals or connectors. This makes stripping and terminating easier than separating round twin-core cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat gauge wire is 2 x 79 strand?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2 x 79 strand configuration gives a total cross-sectional area of 2.50mm² per core. In AWG terms this is roughly equivalent to 13 AWG, though the strand count and construction differ from standard AWG wire.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for permanent installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The PVC sheath is rated for permanent installation in conduit, cable trays and ceiling voids typical in commercial audio systems. The 25A current rating covers standard passive speaker loads at distances typical in conference rooms, function halls and multi-room audio systems.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313495892235,"sku":"801.696UK","price":97.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801696UK_0.jpg?v=1784900731"},{"product_id":"mercury-heavy-duty-figure-8-speaker-cable-2-x-79-strand-black-100m-reel","title":"Mercury Heavy Duty Figure 8 Speaker Cable Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury heavy-duty figure 8 speaker cable is a two-core audio cable built from 2 x 79 strands per conductor, combining copper and copper-clad aluminium (CCA) to balance conductivity with flexibility. Each conductor uses 40 strands of 0.18mm copper wire plus 39 strands of 0.18mm CCA wire, giving a combined cross-sectional area of 2.50mm² and a maximum current rating of 25A. The figure 8 profile measures 5.0 x 10.0mm and allows the two conductors to run parallel while remaining easily separable for termination.\u003c\/p\u003e\n\u003cp\u003eDesigned for permanent installation in commercial sound systems, live sound rigs, public address systems, and high-power home audio, the cable suits runs from amplifiers to passive loudspeakers where long cable lengths are needed and buying by the 100m reel is more cost-effective than pre-cut lengths. The black PVC sheath resists abrasion during installation and the white polarity line printed on one conductor helps maintain correct phase alignment when terminating multiple speaker runs or wiring multi-speaker arrays.\u003c\/p\u003e\n\u003cp\u003eThe hybrid copper\/CCA construction keeps the cable lighter and more flexible than solid copper equivalents while retaining sufficient conductivity for typical PA and distributed speaker installations. The 2.50mm² CSA handles impedances down to 4 ohms on runs up to 20-30m without significant power loss, though longer runs or lower impedances may require stepping up to a heavier gauge. The cable is supplied on a 100m plastic reel that protects the cable during storage and allows clean unspooling during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e25A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e5.0mm x 10.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (40 x 0.18mmØCu + 39 x 0.18mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e2.50mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between copper and CCA conductors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCCA (copper-clad aluminium) wire has an aluminium core with a thin copper coating, making it lighter and cheaper than solid copper. Pure copper has better conductivity, so this cable uses a hybrid construction with 40 copper strands and 39 CCA strands per conductor to balance performance, weight and cost. For most PA and home audio runs under 30m at 8 ohms, the difference in sound quality is negligible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speaker runs is this cable suitable for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2.50mm² CSA and 25A current rating suit passive loudspeakers on runs up to 20-30m at 8 ohms, or 10-15m at 4 ohms. Typical applications include PA systems in function rooms, distributed ceiling speaker installations, or connecting bookshelf speakers in large domestic rooms. For longer runs or lower impedances, step up to a heavier gauge cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the polarity line do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe white line printed on one conductor acts as a polarity marker, helping you maintain consistent phase when wiring multiple speakers. Connecting the marked conductor to the positive terminal on all speakers ensures they move in phase, which is critical for stereo imaging and preventing phase cancellation in multi-speaker arrays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be buried in walls or installed outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe black PVC sheath is designed for indoor installation in conduit, trunking or surface-mounted runs. It is not rated for direct burial in walls (which would require cable meeting building regulations for concealed wiring) and is not UV-stabilised for permanent outdoor exposure. For outdoor speaker runs, use outdoor-rated speaker cable or run this cable inside UV-resistant conduit.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313495925003,"sku":"801.699UK","price":99.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801699UK_0.jpg?v=1784900745"},{"product_id":"mercury-100v-line-speaker-cable-1-15mm-black-25m-reel","title":"Mercury 100V Line Speaker Cable 1.15mm² Black - 25m Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury 100V line speaker cable is a 2-core cable with a 1.15mm² cross-sectional area, designed for connecting distributed speaker systems in commercial PA and public address installations. Each core carries a combination of 25 copper strands and 20 copper-clad aluminium strands at 0.18mm diameter, providing a balance between conductivity and cost across smaller installations. The cable is supplied on a 25m reel with a black PVC sheath and an overall diameter of 7.8mm.\u003c\/p\u003e\n\u003cp\u003e100V line systems step up audio signals to higher voltage and lower current, allowing multiple speakers to be run in parallel over longer cable runs without significant power loss. This 25m reel suits smaller installations such as retail spaces, cafes, small offices and meeting rooms where distributed ceiling speakers or wall-mounted speakers cover one or two zones. The cable supports up to 15A maximum current, which is sufficient for typical small-scale 100V line amplifier outputs in the 50-200W range.\u003c\/p\u003e\n\u003cp\u003eThe black PVC sheath protects the conductors during installation in ceiling voids, wall chases and surface-mounted trunking. The 7.8mm diameter is compact enough to fit through standard cable grips and conduit without excessive bending resistance, while still providing adequate protection for the stranded cores. The copper\/CCA construction keeps the cable lighter and more flexible than pure copper equivalents at this CSA, which simplifies installation in tight spaces or where multiple cable runs converge at a distribution point.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e25m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e15A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e7.8mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (25 x 0.18mmØCu + 20 x 0.18mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e1.15mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is 100V line and why is it used?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e100V line (also called constant voltage) is a method of distributing audio where the amplifier steps up the signal to 100V, allowing multiple speakers to be connected in parallel without impedance matching issues. It's used in commercial PA systems because it allows long cable runs and many speakers on one amplifier output with minimal power loss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length of cable run does 1.15mm² support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 1.15mm² CSA, this cable suits runs up to approximately 25-30m per speaker in typical 100V line installations without significant voltage drop. For longer runs or higher power speakers, a larger CSA cable (2.5mm² or above) would be recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used for low-impedance speaker systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the cable is electrically suitable for 4-16 ohm low-impedance speaker connections, though it's primarily designed and marketed for 100V line use. For low-impedance runs over 10m, a larger CSA is typically preferred to minimise resistance losses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between copper and CCA conductors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper-clad aluminium (CCA) uses an aluminium core with a thin copper coating, making it lighter and cheaper than pure copper. Pure copper has better conductivity and flexibility. This cable combines both in each core to balance cost and performance for typical small PA installations.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313495957771,"sku":"801.816UK","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801816UK_0.jpg?v=1784900759"},{"product_id":"mercury-100v-line-speaker-cable-1-15mm-white-double-insulated-100m-reel","title":"Mercury 100V White Double-Insulated Speaker Cable Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury 100V line speaker cable is a 1.15mm² twin-core cable designed for fixed public address and distributed speaker installations running on 100V line systems. Each core combines 25 copper strands and 20 copper-clad aluminium strands in a hybrid conductor configuration, with red and black inner insulation identifying polarity, all enclosed in a 7.8mm white PVC outer sheath.\u003c\/p\u003e\n\u003cp\u003eSupplied on a 100m reel, the cable suits permanent installations in commercial buildings, retail spaces, warehouses, schools and offices where multiple speakers are wired in parallel from a central 100V line amplifier. The double-insulated construction provides protection against short circuits and voltage leakage without requiring an earth conductor, simplifying installation in surface-mounted trunking or ceiling voids where access for testing is limited.\u003c\/p\u003e\n\u003cp\u003eThe 1.15mm² cross-sectional area handles up to 15A maximum current, supporting high wattage runs to multiple speakers across typical commercial floor areas without significant voltage drop. The white outer sheath blends against white ceilings and walls in commercial interiors, or can be painted over once installed. The hybrid copper\/CCA conductor keeps the cable lighter and more cost-effective than pure copper equivalents while retaining stable signal transmission for voice and background music applications.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e15A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e7.8mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (25 x 0.18mmØCu + 20 x 0.18mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e1.15mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is 100V line and why is it used?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e100V line systems allow multiple speakers to be wired in parallel from a single amplifier, with each speaker fitted with a step-down transformer. This configuration reduces current requirements and allows long cable runs without significant voltage drop, making it common in commercial PA installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum run length before voltage drop becomes an issue?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 1.15mm² CSA and 15A maximum current, typical commercial installations can run 50-80m from the amplifier to the furthest speaker depending on the total wattage tapped from the line. For precise calculations based on your specific speaker taps and layout, consult a qualified installer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PVC sheath is suitable for indoor installations and protected outdoor locations such as covered walkways or under eaves. For fully exposed outdoor runs, UV-resistant cable or protective conduit is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable compatible with standard low-impedance speakers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis cable is electrically compatible with any speaker cable application, but it is specifically designed for 100V line distributed systems. For standard low-impedance (4Ω\/8Ω) speaker connections in home audio or live sound, thicker gauge cable is typically preferred for runs over a few metres.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313496154379,"sku":"801.817UK","price":77.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801817UK_0.jpg?v=1784900773"},{"product_id":"mercury-100v-line-speaker-cable-1-15mm-black-100m-reel","title":"Mercury 100V Line Speaker Cable 1.15mm² Black - 100m Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury 100V line speaker cable is a 1.15mm² 2-core cable supplied on a 100m reel, designed for connecting speakers in distributed 100V line PA systems. Each core combines 25 strands of copper wire and 20 strands of copper-clad aluminium (CCA) in a hybrid construction that balances conductivity and cost. The black PVC outer sheath measures 7.8mm in diameter and provides mechanical protection for indoor runs through ceilings, walls and conduit.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial PA installations in retail spaces, offices, schools and hospitality venues, the 1.15mm² cross-sectional area handles loads up to 15A maximum current. This makes it suitable for multi-speaker distributed systems where individual speaker runs draw modest current but total system draw can reach higher levels. The 100m reel length supports typical single-zone installations without requiring mid-run joints, reducing points of potential failure.\u003c\/p\u003e\n\u003cp\u003eThe hybrid copper\/CCA conductor construction provides DC resistance lower than pure CCA cable while remaining lighter and more cost-effective than pure copper for budget-conscious installations. The 7.8mm outer diameter keeps the cable profile compact enough for discreet installation behind skirting, within cavity walls or bundled in ceiling voids alongside mains and data cabling. The black sheath blends into commercial environments where exposed cable runs are unavoidable.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e15A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e7.8mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (25 x 0.18mmØCu + 20 x 0.18mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e1.15mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between this and pure copper speaker cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis cable uses a hybrid conductor combining copper and copper-clad aluminium (CCA). Pure copper offers lower DC resistance and better long-term reliability, while the hybrid construction reduces cost and weight. For typical 100V line runs under 50m the performance difference is negligible in practice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The black PVC sheath is rated for indoor installation only. For outdoor 100V line runs between buildings or in weather-exposed positions, use a cable with UV-resistant or armoured sheathing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat current does the 1.15mm² CSA support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable is rated for a maximum continuous current of 15A. In practice, 100V line systems distribute power across multiple speaker drops, so individual runs typically draw far less than the maximum rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this for low-impedance speaker connections?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided the run is short. The 1.15mm² cross-section is adequate for low-impedance (4-8 ohm) speaker connections up to approximately 5-10m, but for longer runs or higher-power applications a larger CSA cable is recommended to minimise resistance losses.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313496187147,"sku":"801.818UK","price":76.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801818UK_0.jpg?v=1784900794"},{"product_id":"mercury-100v-line-speaker-cable-2-01mm-double-insulated-white-100m","title":"Mercury 100V Double Insulated Speaker Cable Reel, White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury 100V line speaker cable is a 2-core stranded conductor cable built for professional PA and distributed audio systems, supplied on a 100m reel. Each core contains 40 copper strands and 39 copper-clad aluminium strands at 0.18mm diameter, giving a combined 2.01mm² cross-sectional area per conductor. The cable uses double insulation with red and black inner sleeves around each core, then a white PVC outer sheath rated to carry up to 25A.\u003c\/p\u003e\n\u003cp\u003eDesigned for fixed installation in commercial buildings, houses of worship, schools and hospitality venues where 100V line distributed audio runs over long distances, the cable connects between 100V line amplifiers and ceiling speakers, wall-mounted speakers or horn speakers on a shared loop. The 8mm outer diameter balances flexibility during installation with mechanical protection once terminated. The white sheath allows the cable to run visibly along skirting or ceiling edges in finished spaces without drawing attention.\u003c\/p\u003e\n\u003cp\u003eThe hybrid copper\/CCA construction reduces material cost compared to pure copper while maintaining acceptable conductivity and current-handling for typical 100V line loads. The double insulation provides additional protection against abrasion during pulls through conduit and reduces the risk of short circuits in crowded back boxes or ceiling voids. The 100m reel length suits medium to large installations without requiring joins mid-run.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e25A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e8.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (40 x 0.18mmØCu + 39 x 0.18mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e2.01mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is 100V line and where is it used?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e100V line is a distributed audio system used in commercial installations where multiple speakers run from a single amplifier over long cable runs. The higher voltage allows lower current for the same power, reducing voltage drop and allowing thinner cable than low-impedance systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used for low-impedance (4\/8 ohm) speakers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The cable construction is electrically suitable for both 100V line and low-impedance speaker connections. However, the 2.01mm² CSA may not be sufficient for very long low-impedance runs. Calculate voltage drop based on your specific run length and speaker load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between copper and copper-clad aluminium conductors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper-clad aluminium (CCA) uses an aluminium core with a thin copper outer layer, reducing material cost and weight compared to pure copper. It has slightly higher resistance than pure copper but is widely used in fixed PA installations where the trade-off is acceptable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe white PVC sheath provides moisture resistance for sheltered outdoor applications such as under eaves or in covered walkways. For direct burial or permanent outdoor exposure, use cable rated for external\/underground installation.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313496219915,"sku":"801.878UK","price":112.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801878UK_0.jpg?v=1784900808"},{"product_id":"mercury-100v-line-speaker-cable-2-01mm-black-100m-reel","title":"Mercury 100V Line Speaker Cable 2.01mm² Black - 100m Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury is a 2.01mm² cross-sectional area 100V line speaker cable supplied on a 100m reel, designed for fixed PA installations in commercial, hospitality and public-address systems. Each of the two cores contains 40 strands of 0.18mm copper plus 39 strands of 0.18mm copper-clad aluminium, giving a hybrid conductor that balances cost with conductivity. The outer sheath is black PVC with an 8mm overall diameter.\u003c\/p\u003e\n\u003cp\u003e100V line distribution systems step down from high-voltage, low-current transmission to speaker-level output at the endpoint, reducing power loss over long cable runs in large buildings. The 2.01mm² cross-section handles up to 25A maximum current, making the Mercury suitable for runs of 30-50m between amplifier and speaker transformer in typical office, retail or warehouse installations. The 100m reel length allows multiple drop points to be cut from a single spool without needing joints mid-run.\u003c\/p\u003e\n\u003cp\u003eThe hybrid copper\/CCA construction reduces material cost compared to pure copper while maintaining acceptable resistance for 100V line runs. Red and black inner insulation on the two cores simplifies polarity identification during termination. The black PVC outer sheath resists UV degradation and mechanical abrasion in ceiling voids, trunking and conduit installations. The cable is not rated for outdoor burial or direct exposure to weather.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e25A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e8.0mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (40 x 0.18mmØCu + 39 x 0.18mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e2.01mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum run length for 100V line systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRun length depends on the total speaker load and amplifier output. As a general guide, a 2.01mm² cable like the Mercury supports 30-50m runs in typical commercial PA installations before voltage drop becomes significant. For longer runs or higher loads, step up to a larger CSA cable or consult a PA system designer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for low-impedance speaker systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable is designed for 100V line distribution but can also be used for low-impedance speaker runs (4Ω, 8Ω) where the run length is short enough to avoid excessive resistance. For low-impedance runs over 10m, a larger CSA cable is usually recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable suitable for outdoor or buried installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The black PVC sheath is rated for indoor use only, in ceiling voids, trunking or conduit. It is not rated for direct burial, outdoor exposure or UV resistance beyond incidental ceiling void lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is copper-clad aluminium (CCA)?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCCA is aluminium wire with a thin copper coating. It reduces material cost compared to pure copper but has slightly higher resistance. The Mercury uses a hybrid construction with both copper and CCA strands in each core, balancing cost and conductivity for 100V line applications.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313496350987,"sku":"801.879UK","price":113.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801879UK_0.jpg?v=1784900822"},{"product_id":"mercury-2-core-transparent-speaker-cable-2-x-80-100m-reel","title":"Mercury 2 Core Transparent Speaker Cable 2 x 80 - 100m Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury 2 x 80 is a transparent-sheathed speaker cable with two cores of stranded copper and copper-clad aluminium (CCA) conductors, supplied on a 100m reel. Each core contains 20 copper strands and 60 CCA strands at 0.12mm diameter, giving a combined cross-sectional area of 0.94mm² per core and a maximum current rating of 6A. The clear sheath shows the conductors inside, with one core marked red for polarity identification during installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for permanent speaker installation in commercial audio systems, distributed 100V line systems, home cinema runs and whole-house audio, the cable offers flexibility for routing through wall cavities, ceiling voids and conduit. The 100m reel length suits runs of up to 50m per speaker pair with minimal waste, or shorter runs across multiple zones from a single reel. The 4.2 x 8.2mm profile fits standard cable clips and trunking.\u003c\/p\u003e\n\u003cp\u003eThe copper\/CCA blend balances conductivity with weight and cost for long cable runs where pure copper would be prohibitively heavy or expensive. CCA provides 61% of the conductivity of pure copper at significantly lower cost and weight per metre, making it viable for domestic and light commercial installations where signal loss over typical run lengths remains within acceptable limits. The transparent sheath allows visual inspection of conductor integrity without stripping the cable.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e6A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e4.2mm x 8.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (20 x 0.12mmØCu + 60 x 0.12mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.94mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum run length for this cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor passive speaker systems at 8 ohms, runs up to 15m per speaker maintain acceptable signal loss. For 100V line distributed systems, runs of 30-50m are typical. Longer runs may require a higher CSA cable to avoid audible signal degradation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the red polarity marking indicate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne core is marked red along its length to identify positive polarity. This ensures consistent phasing across multiple speakers. All red cores connect to positive terminals, all unmarked cores to negative. Reversed polarity between speakers causes phase cancellation and weak bass response.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs CCA suitable for all speaker installations?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper-clad aluminium provides 61% of pure copper's conductivity, making it suitable for domestic installations, background music systems and light commercial applications where run lengths are moderate. Critical listening environments, high-power PA systems and very long runs benefit from pure copper cable with higher CSA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe transparent PVC sheath is not UV-stabilised or weatherproof. For outdoor speaker runs, route the cable through conduit or UV-resistant trunking, or use a cable rated for direct outdoor burial.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313496416523,"sku":"801.880UK","price":43.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801880UK_0.jpg?v=1784900838"},{"product_id":"mercury-heavy-duty-transparent-speaker-cable-2-x-123-100m-reel","title":"Mercury Heavy Duty Transparent Speaker Cable 2 x 123 - 100m Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Heavy Duty is a 2-core transparent speaker cable with a 1.17mm² cross-sectional area, supplied on a 100m reel. Each core combines 21 strands of 0.10mm copper with 20 strands of 0.12mm copper-clad aluminium (CCA) in a hybrid conductor structure, rated for a maximum continuous current of 10A. A red polarity indicator runs through one conductor to maintain phase consistency across long runs.\u003c\/p\u003e\n\u003cp\u003eDesigned for medium-power distributed audio installations in commercial, hospitality and residential settings, the cable suits ceiling speaker systems, background music zones and multi-room audio where runs exceed 20-30m. The transparent PVC sheath allows visual inspection of terminations and conductor integrity without needing to strip the cable back, which can save troubleshooting time on installed runs.\u003c\/p\u003e\n\u003cp\u003eThe hybrid copper\/CCA construction balances conductivity with weight and cost for runs where pure oxygen-free copper would be over-specified. The 4.5 x 9.0mm flat profile sits neatly under carpet or behind skirting and the flexible stranding allows the cable to be dressed around corners and through conduit without kinking. The 100m reel length covers typical zoned installations without mid-run joins.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e10A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e4.5mm x 9.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (3 x (21 x 0.10mmØCu + 20 x 0.12mmØCCA))\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e1.17mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between copper and CCA conductors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper-clad aluminium uses an aluminium core with a thin copper coating. Pure copper offers slightly lower resistance, but CCA reduces weight and cost while maintaining acceptable conductivity for distributed audio runs where the power demand is moderate. The hybrid construction in this cable balances both materials.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat maximum run length does the 1.17mm² CSA support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMaximum run length depends on the speaker impedance and amplifier power. For an 8Ω speaker load with typical distributed audio amplifiers (30-50W), runs up to 40-50m are acceptable before signal loss becomes audible. Higher impedance speakers (16Ω) tolerate longer runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is the sheath transparent?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe clear PVC sheath allows you to visually inspect terminations and conductor condition without stripping the cable. This helps when troubleshooting installed runs or verifying polarity continuity through junction boxes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The PVC sheath is rated for indoor use only. For outdoor speaker installations, use a UV-resistant outdoor-rated speaker cable with appropriate weatherproofing at terminations.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313496449291,"sku":"801.881UK","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801881UK_0.jpg?v=1784900854"},{"product_id":"mercury-2-core-speaker-cable-1-85mm-100m-reel-transparent-with-red-polarity-marker","title":"Mercury Transparent Two Core Speaker Cable Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury is a 2 core speaker cable with a 1.85mm² cross-sectional area per conductor, supplied on a 100m reel. Each core comprises 7 bundles of mixed copper and copper-clad aluminium strands (15 x 0.10mm copper + 13 x 0.12mm CCA per bundle), enclosed in a transparent PVC sheath. One core is marked with a red polarity indicator running the length of the cable to simplify phase-correct wiring during installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for permanent audio installations in commercial venues, home theatre systems, multi-room audio distribution and PA setups, the cable handles continuous loads up to 15A maximum per core. The 1.85mm² cross-section supports speaker runs up to 20-30m for 8-ohm passive speakers without significant signal loss, making it suitable for distributed audio zones in larger properties or small to medium commercial installs. The transparent sheath allows visual inspection of conductor integrity without stripping back the cable.\u003c\/p\u003e\n\u003cp\u003eThe combination of pure copper and copper-clad aluminium stranding balances conductivity with flexibility and weight. Pure copper strands provide the primary signal path, while the CCA strands contribute mechanical strength and reduce the overall weight of a 100m reel compared to solid copper alternatives. The 4.8mm x 9.6mm flat profile sits neatly under carpets, along skirting and through conduit without creating a pronounced ridge. The red polarity stripe ensures consistent phasing across multiple speaker pairs when wiring in parallel or series configurations.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e15A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e4.8mm x 9.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (7 x (15 x 0.10mmØCu + 13 x 0.12mmØCCA))\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e1.85mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speaker run length does this cable support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 1.85mm² cross-section supports typical 8-ohm passive speaker runs up to 20-30m without significant signal loss. For longer runs or lower impedance speakers (4-6 ohms), stepping up to a larger CSA cable may be needed to avoid power drop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the red polarity stripe indicate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe red stripe runs along one of the two cores to mark polarity (positive or negative terminal). This ensures consistent phase wiring when connecting multiple speakers in parallel or series, preventing phase cancellation issues.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used outdoors or in damp environments?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable has no specific IP rating and is designed for dry indoor installations. For outdoor speaker runs or damp environments (garden audio, poolside), use a cable with UV-resistant and moisture-resistant sheathing rated for outdoor use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the cable sold. By the metre or as a full reel?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product is supplied as a full 100m reel. The packed quantity of 4 reels refers to the carton configuration for bulk orders. Individual reels are sold separately.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313496482059,"sku":"801.882UK","price":93.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/801882UK_0.jpg?v=1784900869"},{"product_id":"mercury-fig-8-power-speaker-cable-2-x-14-strand-red-black-100m-reel","title":"Mercury 14-Strand Fig 8 Speaker Cable Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury Fig 8 is a 2-core speaker and power cable with a figure-8 profile, using a mixed copper and copper-clad aluminium (CCA) conductor construction rated at 0.36mm² cross-sectional area per core. The cable uses 7 strands of 0.18mm copper and 7 strands of 0.18mm CCA per core, enclosed in a red and black PVC sheath that runs as two joined parallel conductors with polarity colour coding.\u003c\/p\u003e\n\u003cp\u003eDesigned for lightweight audio applications where conductor resistance is less critical than installation flexibility and cost, the cable suits small bookshelf speaker runs under 10m, automotive audio wiring, temporary PA setups, and low-power DC applications up to 2.5A. The 2.3 x 4.6mm flat profile routes easily behind skirting, under carpets, and through tight vehicle panel gaps without the bulk of round twin-core cable.\u003c\/p\u003e\n\u003cp\u003eThe mixed copper\/CCA construction reduces material cost compared to pure copper while retaining sufficient conductivity for short speaker runs at domestic listening levels. CCA (copper-clad aluminium) uses an aluminium core with a thin copper coating, which increases resistance compared to solid copper but remains acceptable where cable length is short and power draw is low. The red\/black sheath colour coding ensures correct polarity when wiring speakers or connecting DC devices.\u003c\/p\u003e\n\u003cp\u003eSupplied on a 100m reel, the cable is sold by the metre at point of sale. The reel format suits installers running multiple shorter lengths across a project without needing to order individual cut lengths. The 2.5A maximum current rating limits the cable to audio and signal applications rather than mains power distribution.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e2.5A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2.3mm x 4.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.36mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (7 x 0.18mmØCu + 7 x 0.18mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eRed\/Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between copper and CCA conductors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCCA (copper-clad aluminium) uses an aluminium core with a thin copper coating. It has higher resistance than pure copper, meaning more power loss over longer cable runs. For short speaker runs under 10m at domestic listening levels, the difference in audio performance is negligible. For longer runs or higher-power applications, pure copper cable is preferable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speaker impedance does this cable suit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 0.36mm² CSA suits 8-ohm speakers on runs up to 10m without significant power loss. For 4-ohm speakers or runs exceeding 10m, a larger CSA cable (1.5mm² or above) reduces resistance and maintains amplifier damping factor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for mains power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The 2.5A maximum current rating and conductor construction are not suitable for mains voltage distribution. Use this cable only for low-voltage DC applications, speaker connections, and signal runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the cable sold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable is supplied on a 100m reel and sold by the metre. Order the total meterage required and it will be cut from the reel at dispatch.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313496514827,"sku":"802.368UK","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/802368UK_0.jpg?v=1784900884"},{"product_id":"mercury-2-core-figure-8-speaker-cable-2-x-24-strand-red-black-100m-reel","title":"Mercury Figure 8 Two Core Speaker Cable Reel","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury figure 8 speaker cable is a 2 core power and audio cable with 24 strands per core (12 copper, 12 copper-clad aluminium), giving a combined cross-sectional area of 0.61mm² per conductor. The red and black PVC sheath makes polarity identification straightforward during installation, and the flat figure-8 profile allows the cable to sit neatly against walls, under carpets and through vehicle door frames without excess bulk.\u003c\/p\u003e\n\u003cp\u003eDesigned for low-power speaker runs, in-car audio systems, and small automotive electrical wiring where current draw stays below 6A, the cable is flexible enough to route through tight spaces and around corners without kinking. The 100m reel suits workshop, installation and automotive trade use where multiple runs are needed from a single bulk spool. Typical applications include connecting ceiling speakers to an amplifier, running speaker wire to rear parcel shelf speakers in vehicles, and wiring low-voltage LED strips or small 12V accessories.\u003c\/p\u003e\n\u003cp\u003eThe hybrid copper and copper-clad aluminium construction keeps cost down while maintaining adequate conductivity for short to medium speaker runs up to 10-15 metres. The 2.8 x 5.6mm profile is compact enough to hide behind skirting or inside cable conduit, and the figure-8 format allows the two cores to be split apart cleanly where needed for connections to terminal blocks or speaker binding posts. The PVC sheath provides basic insulation and abrasion resistance for indoor and dry automotive environments.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e6A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2.8mm x 5.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.61mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (12 x 0.18mmØCu + 12 x 0.18mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eRed\/Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum current rating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable is rated to 6A maximum. This is adequate for most passive speaker connections and small 12V automotive accessories, but not for mains power applications or high-current equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the two cores be separated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The figure-8 profile allows the red and black conductors to be split apart cleanly where needed for connections to separate terminals. A sharp blade or craft knife can separate the cores along the length if required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for outdoor or wet environments?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PVC sheath provides basic insulation for indoor and dry automotive use. It is not rated for outdoor burial, continuous UV exposure or submersion. For permanent outdoor speaker runs, use cable with UV-stabilised or weatherproof sheath.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speaker impedance and run length does it suit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith 0.61mm² CSA, the cable is best kept to runs under 15 metres for 8-ohm speakers to avoid noticeable signal loss. For longer runs or 4-ohm loads, consider stepping up to 1.5mm² or 2.5mm² cable to reduce resistance.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313496580363,"sku":"802.459UK","price":31.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/802459UK_0.jpg?v=1784900899"},{"product_id":"mercury-2-core-fig-8-speaker-cable-100m-red-black-2-x-32-strand","title":"Mercury 2 Core Fig 8 Speaker Cable 100m - Red\/Black 2 x 32 Strand","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury 2 core figure-8 speaker cable combines 32 strands per conductor (16 copper + 16 copper-clad aluminium) in a flat parallel configuration with red and black PVC sheathing. Each conductor carries a 0.81mm² cross-sectional area and the cable is rated to 10A maximum current, making it suitable for low to medium power speaker runs, automotive wiring and general-purpose DC distribution where polarity identification matters.\u003c\/p\u003e\n\u003cp\u003eDesigned for automotive audio installations, home speaker wiring and 12V\/24V DC systems, the figure-8 profile sits flat against surfaces and feeds easily through vehicle door jambs, under carpets and along skirting boards without the bulk of round twin-core cable. The red\/black colour coding provides instant polarity identification during installation, reducing wiring errors in multi-speaker setups or automotive harnesses where swapped polarity causes phase cancellation or reversed fan direction.\u003c\/p\u003e\n\u003cp\u003eThe mixed copper\/CCA conductor construction balances conductivity with cost and weight. Pure copper strands carry the bulk of the current while CCA strands add mechanical strength and reduce material cost on longer runs. The 3.2 x 6.4mm overall dimension keeps the cable low-profile while the PVC sheath provides abrasion resistance against vehicle bodywork, carpet backing and timber edges. Supplied on a 100m reel, the cable can be cut to length on site without waste.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e10A max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e3.2mm x 6.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.81mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrands\u003c\/td\u003e\n\u003ctd\u003e2 x (16 x 0.18mmØCu + 16 x 0.18mmØCCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eCopper\/Copper Clad Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eRed\/Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum power this cable can handle for speakers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 10A maximum current and typical 4-8 ohm speaker impedances, the cable handles speaker runs up to approximately 80-160W per channel on home audio systems, and higher wattages on automotive 12V systems where voltage is lower. For home hi-fi above 100W per channel or runs longer than 10m, consider stepping up to a larger CSA cable to minimise power loss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for mains voltage applications?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The cable is designed for low-voltage DC applications (automotive 12V\/24V, speaker-level audio signals, low-voltage LED lighting). It does not carry mains voltage ratings or certifications and must not be used on 230V AC circuits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between copper and copper-clad aluminium strands?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCopper strands offer higher conductivity and carry most of the current. Copper-clad aluminium (CCA) strands have an aluminium core with a thin copper coating, reducing weight and material cost while adding mechanical strength. The mixed construction is common in automotive and budget speaker cable where pure copper would add unnecessary cost on longer runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the cable terminated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor automotive and speaker applications, the cable is typically stripped back 6-8mm and crimped into ring terminals, spade terminals or bootlace ferrules, or soldered directly to terminal posts. The stranded construction makes it flexible enough to wrap around screw terminals on older speaker binding posts.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313496613131,"sku":"802.520UK","price":40.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/802520UK_0.jpg?v=1784900913"}],"url":"https:\/\/niori.co.uk\/collections\/audio-cables.oembed","provider":"Niori","version":"1.0","type":"link"}