{"title":"Audio \u0026 AV","description":"\u003cp\u003eOur Audio \u0026amp; AV range covers sound, vision and music: speakers and PA for venues and installations, microphones for stage and studio, amplifiers and mixers, headphones, musical instruments, cables and connectors, TV brackets and aerials, and the cases that carry it all. The sections below split it by what you are trying to do rather than by brand. Found it cheaper elsewhere? We will match the price.\u003c\/p\u003e","products":[{"product_id":"av-link-twin-rg6-satellite-extension-kit-1m","title":"AV:Link Twin RG6 Satellite Extension Kit - 1m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link twin RG6 satellite extension kit provides 1m of twin satellite cable with pre-fitted F-type connectors on both ends, plus two F-type couplers for joining to existing cable runs. The kit is designed for short-distance relocation of Sky or Freesat boxes when repositioning equipment without running entirely new cable through walls or ceilings.\u003c\/p\u003e\n\u003cp\u003eEach of the two RG6 cables carries one satellite feed, allowing dual-LNB or dual-tuner installations to be extended in a single run. The 75-ohm impedance and aluminium foil screen maintain signal integrity across the short 1m length, preventing picture degradation or loss of channels. The F-type connectors use a threaded zinc alloy body that screws directly onto F-type sockets on satellite receivers, LNB outputs or wall plates without requiring additional tools or crimping.\u003c\/p\u003e\n\u003cp\u003eThe two included F-type couplers (female-to-female threaded barrels) allow the 1m extension to be joined inline with existing satellite cables, which is useful when a receiver needs to be moved slightly further from its current position but a full re-cable is impractical. The twin cable construction keeps both feeds together, reducing clutter and simplifying routing behind TV units or along skirting boards.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1m\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is this kit used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit extends the distance between a satellite LNB feed and a Sky or Freesat receiver by 1m. It is typically used when relocating a set-top box to a new position on the same wall or to an adjacent surface without re-running the entire cable from the dish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the connectors need tools to fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The F-type connectors are pre-fitted to the cable ends and screw onto F-type sockets by hand. The two included couplers also use hand-tightened threaded connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable and connectors are not rated for outdoor or damp environments. Use this kit indoors only, between the wall plate and the receiver or between indoor junction points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are there two cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDual-LNB satellite dishes and dual-tuner receivers require two separate feeds to receive the full range of channels and support recording one channel while watching another. The twin construction keeps both feeds together.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313045266699,"sku":"112.021UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112021UK_LD2_49fbb910-83c4-43d8-846f-9b4ce2356d63.jpg?v=1715187253"},{"product_id":"av-link-twin-rg6-satellite-extension-kit-3m","title":"AV:Link Twin RG6 Satellite Extension Kit - 3m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link twin RG6 satellite extension kit provides 3m of twin coaxial cable with pre-fitted F-type connectors and two F-type couplers for extending or relocating satellite receivers. Each cable carries a 1mm copper-clad steel (CCS) conductor surrounded by 4.6mm foam polyethylene dielectric, aluminium foil screen and aluminium braid, giving 75 ohm impedance for digital satellite signal transmission.\u003c\/p\u003e\n\u003cp\u003eDesigned for Sky and Freesat box installations where the existing cable run is too short, the kit allows the receiver to be moved to a different room or position without re-running cable from the LNB. The pre-fitted F-type connectors screw directly onto the receiver's input ports, while the two included F-type couplers join the extension cable to the existing cable run. This avoids the need for crimping or soldering on site.\u003c\/p\u003e\n\u003cp\u003eThe twin cable configuration carries two independent signals. Typically used for dual-tuner receivers that record one channel while watching another, or for connecting two separate outputs from a quad LNB to a single receiver. The 6.6mm diameter per cable is standard RG6 gauge, matching most UK satellite installations installed since the mid-2000s. The zinc alloy F-type connectors resist corrosion better than brass-plated steel in damp environments such as loft spaces.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.25KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e2 x 6.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eCCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e64 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAlumnium foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eF type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector material\u003c\/td\u003e\n\u003ctd\u003eZinc alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included in the kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit contains one 3m twin RG6 cable with pre-fitted F-type connectors at both ends (four connectors total, two per cable end) and two F-type barrel couplers for joining to existing cable runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with my existing satellite cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit works with any standard RG6 coaxial cable fitted with F-type connectors. If your existing cable has a different connector type or is a different gauge, you may need an adapter or a different extension solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable and connectors are rated for indoor use and sheltered outdoor runs such as under eaves or in conduit. For fully exposed outdoor runs, use a kit with weatherproof connectors and UV-resistant cable jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does twin cable mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwin cable carries two independent coaxial cables side-by-side, typically used for dual-tuner satellite receivers that need two separate LNB outputs to record one channel while watching another.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313046544651,"sku":"112.023UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112023UK_0.jpg?v=1784888815"},{"product_id":"av-link-2-way-scart-splitter-with-manual-switch-50cm-lead","title":"AV:Link 2-Way SCART Splitter with Manual Switch - 50cm Lead","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 2-way SCART splitter connects two analogue video sources to a single SCART input on a TV or display. A manual rocker switch on the housing selects which source feeds the output, allowing you to switch between a VCR, DVD player, Freeview box or other analogue device without unplugging cables each time.\u003c\/p\u003e\n\u003cp\u003eDesigned for homes and offices still using legacy analogue equipment, the splitter suits scenarios where drawer space or shelf access makes swapping cables impractical. The 50cm lead from the splitter housing to the TV-side SCART plug allows the switch box to sit on a shelf or the floor near the devices rather than hanging directly from the TV socket. Both input sockets on the housing are female 21-pin SCART.\u003c\/p\u003e\n\u003cp\u003eThe housing measures approximately 90mm x 60mm x 25mm and weighs 105g, so it sits stable on a shelf without tipping when cables are inserted. The rocker switch is labelled 1 and 2 to indicate which source is active. The splitter is passive. It requires no external power and simply routes the selected input's composite video, RGB and stereo audio signals to the output.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003e50cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.10KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan both sources be connected at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Both SCART inputs can remain connected permanently. The manual rocker switch selects which source is routed to the TV output at any given time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The splitter is a passive switch box that routes analogue signals mechanically when you flip the rocker switch. No mains adapter or batteries are needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support RGB and composite video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 21-pin SCART connection carries RGB, composite video and stereo audio signals. The splitter passes whichever signal format the connected source device sends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in reverse to send one source to two TVs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The AV:Link is designed as an input selector, not a signal distributor. Using it in reverse may result in poor picture quality or no signal on one or both outputs.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313063026955,"sku":"112.172UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112172UK_0.jpg?v=1784888973"},{"product_id":"av-link-toslink-to-toslink-fibre-optic-cable-1m","title":"AV:Link Toslink to Toslink Fibre Optic Cable - 1m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link Toslink to Toslink cable is a 1m fibre optic audio cable with gold-plated optical connectors on both ends, designed for digital audio transmission between compatible devices. Toslink (also called optical S\/PDIF) carries uncompressed stereo or multi-channel audio as pulses of light through a 2.2mm diameter fibre core, immune to electrical interference that can affect copper cables.\u003c\/p\u003e\n\u003cp\u003eCommon applications include connecting CD players to AV receivers, soundbars to TVs, gaming consoles to audio systems, or any pair of devices with Toslink optical outputs and inputs positioned within 1m of each other. The cable is particularly suited to desktop setups, compact home theatre systems and equipment racks where components are placed side by side. The 1m length minimises cable excess in tight installations while remaining flexible enough to route around corners without kinking.\u003c\/p\u003e\n\u003cp\u003eThe gold-plated tips on each connector reduce surface oxidation and improve light transmission at the connection points. The 2.2mm cable diameter gives enough flexibility to position equipment without the cable tangling or creating stress on the optical ports. At 120g, the cable is light enough not to pull on the connectors when routed vertically or suspended between devices.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.12KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e2.2mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between Toslink and a standard 3.5mm audio cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eToslink transmits digital audio as light pulses through fibre, carrying uncompressed stereo or multi-channel surround sound without interference. A 3.5mm cable is analogue and carries only stereo audio as electrical signal, which can pick up interference from nearby cables and equipment. For devices with both options, Toslink typically provides higher fidelity and supports surround formats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable carry surround sound formats like Dolby Digital or DTS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Toslink supports compressed multi-channel formats including Dolby Digital 5.1 and DTS. It does not support high-resolution formats like Dolby TrueHD or DTS-HD Master Audio, which require HDMI.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs 1m long enough for a TV to soundbar connection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt depends on the layout. If the soundbar sits directly below the TV and the Toslink ports are on the back or side of each device, 1m is typically sufficient. For wall-mounted TVs with soundbars placed on furniture below, measure the actual cable run required. A 1.5m or 2m cable may be safer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the connectors have protective caps?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost Toslink cables, including this AV:Link model, ship with removable plastic caps on each connector to protect the optical tips during storage and transport. Remove the caps before connecting.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313066533131,"sku":"112.200UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112200UK_0.jpg?v=1784888993"},{"product_id":"av-link-fibre-optic-lead-toslink-to-toslink-2-5m","title":"AV:Link Fibre Optic Lead Toslink to Toslink - 2.5m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link Toslink to Toslink cable is a 2.5m fibre optic lead with standard Toslink connectors at both ends, each finished with gold-plated tips. The 2.2mm diameter cable carries digital audio signals optically rather than electrically, making it immune to electromagnetic interference that can affect copper cables in the same cable run.\u003c\/p\u003e\n\u003cp\u003eDesigned for short-range digital audio connections, the 2.5m length suits soundbars positioned near TVs, gaming consoles connected to AV receivers, multimedia PCs linked to active speakers, and DVD or Blu-ray players feeding digital audio into home theatre systems. Both connectors use the standard square Toslink profile compatible with SPDIF optical ports on most consumer audio equipment manufactured since the 1990s.\u003c\/p\u003e\n\u003cp\u003eThe thin 2.2mm cable provides flexibility for routing behind furniture or along skirting boards without the stiffness of thicker cables, while the fibre core maintains signal integrity over the 2.5m run. The gold-plated connector tips resist oxidation at the point of contact with the device ports, maintaining a clean optical path. At 200g the cable is light enough to avoid pulling on rear panel connections when routed vertically.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.20KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2.5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e2.2mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat devices use Toslink connections?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eToslink optical audio ports appear on soundbars, AV receivers, televisions, gaming consoles (PlayStation, Xbox), multimedia PCs with optical outputs, DVD and Blu-ray players, and some active speaker systems. The square connector profile is standard across all SPDIF optical implementations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes fibre optic cable give better sound quality than coaxial?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth Toslink fibre optic and coaxial digital cables carry the same S\/PDIF signal format, so the audio data is identical. Fibre optic has the advantage of complete electrical isolation between source and destination, eliminating ground loop hum and electromagnetic interference. In electrically noisy environments or long cable runs near mains power, this can make an audible difference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the cable be bent around tight corners?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2.2mm diameter allows moderate bending, but fibre optic cables should not be bent below the minimum bend radius of approximately 25mm (roughly the diameter of a £2 coin). Sharp kinks or tight loops can fracture the fibre core and cause signal loss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable directional?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Toslink to Toslink cables are bidirectional and work equally well in either orientation. Either end can connect to the source or destination device.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313067647243,"sku":"112.202UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112202UK_0.jpg?v=1784889012"},{"product_id":"av-link-toslink-to-toslink-fibre-optic-cable-5m","title":"AV:Link Toslink to Toslink Fibre Optic Cable - 5m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link Toslink to Toslink fibre optic cable transmits digital audio signals over a 5-metre optical path between devices equipped with Toslink (optical S\/PDIF) ports. Both connectors carry gold-plated metal tips that protect the fibre cores during insertion and removal, and the 2.2mm cable diameter balances flexibility with protection for the internal fibre strands.\u003c\/p\u003e\n\u003cp\u003eDesigned for home cinema, gaming and music systems where audio devices sit 3-5 metres apart, the cable connects soundbars to TVs, gaming consoles to AV receivers, Blu-ray players to amplifiers, and PC soundcards to powered monitors. The fibre optic construction is immune to electrical interference, so the cable can be run alongside mains cables or through cable conduits without signal degradation.\u003c\/p\u003e\n\u003cp\u003eThe 5-metre length suits most living room configurations where the TV and soundbar sit on opposite walls, or where a console or media player connects to an AV receiver in a cabinet across the room. The cable arrives in a sealed retail bag and includes no additional adapters or converters. It is a direct Toslink-to-Toslink connection only.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.50KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e5.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e2.2mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat devices use Toslink ports?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eToslink (also called optical S\/PDIF) ports are found on soundbars, AV receivers, Blu-ray and DVD players, gaming consoles (PlayStation, Xbox), Apple TV, some TVs, and PC soundcards. The port is typically a square recess with a hinged dust flap that opens when the cable is inserted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable support surround sound formats?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eToslink can carry stereo PCM, Dolby Digital (5.1), and DTS (5.1) audio streams. It cannot carry lossless formats like Dolby TrueHD or DTS-HD Master Audio. Those require HDMI. Check your source device's audio output settings to confirm the format being sent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the cable be bent or coiled?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fibre optic core inside the cable is fragile. Avoid sharp bends (less than 25mm radius) and do not knot or tie the cable tightly. Gentle coiling for storage is acceptable, but do not crush or step on the cable as this can break the internal fibre and block signal transmission.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a 5m cable degrade the audio signal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Fibre optic transmission over 5 metres introduces negligible signal loss for digital audio. The optical connection is either fully operational or completely non-functional. There is no gradual quality reduction as with analogue cables.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313067680011,"sku":"112.204UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112204UK_0.jpg?v=1784889030"},{"product_id":"av-link-10m-fibre-optic-toslink-cable-digital-optical-audio-lead","title":"AV:Link Fibre Optic 10m Digital Audio Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 10m Toslink fibre optic cable transmits digital audio signals between devices fitted with optical audio ports, using Toslink connectors at both ends. The cable carries S\/PDIF format audio. The same signal format used by soundbars, AV receivers, gaming consoles, DVD\/Blu-ray players and TV optical outputs. Over a flexible 2.2mm diameter fibre core.\u003c\/p\u003e\n\u003cp\u003eDesigned for runs where a standard 1-2m cable is too short, the 10m length allows connections across living rooms, from wall-mounted TVs to floor-standing AV equipment, or between rooms where routing through walls or under flooring is needed. Fibre optic transmission is immune to electromagnetic interference from mains cables or wireless signals, so the audio signal remains clean even when the cable runs alongside power leads or through cluttered equipment racks.\u003c\/p\u003e\n\u003cp\u003eGold-plated metal tips on both Toslink plugs reduce oxidation and maintain clean contact with the optical transceiver inside each device. The black PVC jacket is flexible enough to route around corners and behind furniture without kinking, and the 2.2mm profile allows the cable to fit through narrow cable management channels. The cable weighs 500g across its full 10m length, giving enough mass to avoid accidental disconnection from vertical ports while remaining light enough to handle during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.50KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e10.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e2.2mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat devices use Toslink optical audio?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSoundbars, AV receivers, TVs with optical audio output, gaming consoles (PlayStation, Xbox), DVD\/Blu-ray players, CD players and PC soundcards with S\/PDIF optical ports. The cable works with any device that has a square Toslink optical socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the 10m length affect audio quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Digital optical cables transmit light pulses rather than electrical signals, so there is no signal degradation over 10m. The audio data arrives at the receiving device in exactly the same format it left the source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable carry surround sound formats?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, up to the bandwidth limit of the Toslink standard. The cable supports Dolby Digital 5.1, DTS 5.1 and stereo PCM. It does not support higher-bandwidth formats like Dolby Atmos or DTS:X, which require HDMI ARC\/eARC connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable bidirectional?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Either end can be plugged into the source device or the receiving device. There is no 'input' or 'output' orientation to the cable.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313067745547,"sku":"112.205UK","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112205UK_0.jpg?v=1784889048"},{"product_id":"av-link-figure-8-speaker-wire-2-x-13-strand-0-41mm-white-black-10m","title":"AV:Link Figure 8 Speaker Wire 10m White\/Black Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis AV:Link figure 8 speaker wire is a 10m run of twin-conductor cable with 0.41mm² cross-sectional area per conductor, built from copper-clad aluminium (CCA) strands in a 2 x 13 x 0.2mm configuration. The white PVC sheath carries one conductor with a black polarity marker running along its length, allowing quick visual identification of positive and negative during termination.\u003c\/p\u003e\n\u003cp\u003eDesigned for low-power audio distribution in domestic hi-fi systems, background music installations and small commercial AV setups, the cable suits runs between amplifiers and passive loudspeakers where power handling stays below the 2.5A maximum current rating. The figure-8 profile sits flat against skirting boards and under carpets without the bulk of round twin-core cable, and the twin conductors separate cleanly when stripped for screw-terminal or spring-clip speaker connections.\u003c\/p\u003e\n\u003cp\u003eThe 0.41mm² CSA provides adequate conductivity for short to medium runs (under 10m) at 8-ohm impedance without significant voltage drop, making it suitable for stereo pairs in typical living rooms, retail background music zones, and office meeting spaces. The CCA conductor material offers a lower-cost alternative to pure copper while maintaining acceptable performance for non-critical audio applications. The cable arrives in a sealed retail bag for resale or project stock.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.15KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e2.5A Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrand\u003c\/td\u003e\n\u003ctd\u003e2 x (13 x 0.2mmØ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.41mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003eCCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e10m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheath\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum recommended speaker distance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 0.41mm² CSA and 8-ohm impedance, runs under 10m maintain acceptable voltage drop for domestic hi-fi and background music systems. Longer runs or lower-impedance speakers may benefit from a larger gauge cable to avoid power loss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between CCA and pure copper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCCA (copper-clad aluminium) uses an aluminium core with a thin copper coating, providing lower cost and lighter weight than pure copper. Pure copper offers better conductivity and is preferred for high-fidelity or long-run installations, but CCA performs adequately for short runs and non-critical audio applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I identify polarity when terminating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne conductor has a black marker stripe running along the white sheath. This marked conductor is typically assigned to the negative terminal, with the unmarked conductor going to positive, but consistent polarity across both speakers matters more than which conductor is which.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PVC sheath is not rated for outdoor or UV exposure. For garden or outdoor speaker installations, use cable specifically rated for external use with UV-resistant and moisture-proof sheathing.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313079836939,"sku":"112.500UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112500UK_0.jpg?v=1784885546"},{"product_id":"av-link-adsl-signal-filter-bt431a-to-rj11-bt431a","title":"AV:Link ADSL Signal Filter - BT431A to RJ11 \u0026 BT431A","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link ADSL signal filter is a white plastic adapter that converts a single BT431A telephone plug into two outputs: one RJ11 socket for ADSL broadband connection and one filtered BT431A socket for a telephone or fax machine. The internal filter separates the high-frequency ADSL signal from the voice-frequency telephone signal, preventing interference between the two devices when both share the same phone line.\u003c\/p\u003e\n\u003cp\u003eDesigned for UK residential and small office installations where ADSL broadband and a landline telephone connect to the same wall socket, the filter plugs directly into the BT431A master socket or extension and requires no tools or wiring. The ADSL modem or router connects to the RJ11 socket, while the telephone or fax connects to the filtered BT431A socket. Up to four filters can be used on a single telephone line if multiple extension points need filtering, though most installations only require one filter at the master socket.\u003c\/p\u003e\n\u003cp\u003eThe filter weighs 25g and measures approximately 60mm x 40mm x 25mm, so it sits flush against the wall socket without obstructing adjacent sockets or furniture. The white plastic casing matches standard UK telephone wall plates and the design includes no LEDs or moving parts, making it a passive, maintenance-free component once installed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent rating\u003c\/td\u003e\n\u003ctd\u003e431\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eModular (RJ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is an ADSL filter needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eADSL broadband and telephone voice signals share the same copper line but use different frequency ranges. Without a filter, the ADSL signal can cause crackling, static or interference on the telephone line, and the telephone signal can disrupt the broadband connection. The filter separates the two signals so each device receives only the frequencies it needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere should the filter be installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe filter plugs directly into the BT431A wall socket where the ADSL modem or router would normally connect. If you have multiple telephone extension sockets in the property and use phones on those extensions, each extension socket may need its own filter to prevent interference. Most users only need one filter at the master socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple filters be used on one line?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Up to four ADSL filters can be used on a single telephone line if you have multiple extension points. Each extension socket with a connected telephone or fax should have its own filter to prevent the telephone device from interfering with the ADSL signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with fibre broadband?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This filter is designed for ADSL (Asymmetric Digital Subscriber Line) broadband, which runs over traditional copper telephone lines. If your broadband is delivered via fibre-to-the-cabinet (FTTC) or fibre-to-the-premises (FTTP), you typically do not need an ADSL filter as the broadband signal does not share the voice line in the same way.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313094713611,"sku":"113.538UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/113538UK_0.jpg?v=1784889067"},{"product_id":"av-link-rj11-plug-to-2-x-rj11-socket-splitter","title":"AV:Link RJ11 Plug to 2 x RJ11 Socket Splitter","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link RJ11 splitter connects a single RJ11 plug to two RJ11 sockets, allowing two telephone or data devices to share one outlet. The adapter supports standard 6P4C RJ11 wiring used in telephone and ADSL modem connections, with passive pass-through that requires no external power.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and small office use where a single telephone line needs to feed two devices. Such as a landline phone and an ADSL modem, or two separate phone handsets in different rooms connected via extension cable. The splitter fits USA and Southern Ireland telephone outlet standards, and the compact form factor allows it to sit flush against a wall plate without blocking adjacent sockets.\u003c\/p\u003e\n\u003cp\u003eThe adapter weighs 11g and measures approximately 40mm across the face, small enough to fit in tight spaces behind furniture or along skirting board cable runs. The two output sockets are wired in parallel, so both devices receive the same signal simultaneously. This is a passive splitter with no filtering or switching. Both outputs are always active when the input plug is connected to a live line.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.01KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for ADSL broadband?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The splitter supports ADSL modem connections and is commonly used to connect a modem and a landline phone to the same telephone outlet. Both devices will share the line. If the phone is in use, it may affect broadband performance temporarily.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with UK BT telephone sockets?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis splitter uses RJ11 connectors, which are standard in the USA and Southern Ireland. UK BT telephone outlets use a different connector type (BT431A). To use this splitter with a UK socket, you would need a BT to RJ11 adapter between the wall socket and this splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre both outputs active at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The two RJ11 sockets are wired in parallel, so both receive the same signal simultaneously. This is a passive splitter with no switching or filtering. When the input plug is connected to a live line, both outputs are live.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313094975755,"sku":"113.544UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/113544UK_0.jpg?v=1784889081"},{"product_id":"av-link-coaxial-y-splitter-1-plug-to-2-sockets","title":"AV:Link Coaxial Y Splitter - 1 Plug to 2 Sockets","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link coaxial Y splitter takes one incoming aerial signal and splits it to two output sockets, allowing a single TV aerial or FM radio antenna to feed two separate devices. The splitter has one male coaxial plug on the input side and two female coaxial sockets on the output side, both using standard RF connectors compatible with UK aerial cable.\u003c\/p\u003e\n\u003cp\u003eDesigned for domestic TV and radio installations where one aerial feed needs to supply two rooms or two devices in the same room, the Y splitter provides passive signal distribution without requiring external power. The splitter works with both digital Freeview TV signals and analogue FM radio signals, though splitting the signal between two devices will reduce the signal strength to each output compared to a direct connection.\u003c\/p\u003e\n\u003cp\u003eThe metal-bodied construction and threaded F-type connectors provide a more secure connection than push-fit alternatives, reducing the risk of loose contacts that cause picture breakup or radio interference. The compact hexagonal body measures approximately 40mm across the widest point, with the three connector ports arranged at 120-degree intervals to minimise strain on connected cables.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoaxial (Aerial)\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes splitting the signal reduce quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each output receives approximately half the signal strength of the input. In areas with strong aerial signals this is rarely noticeable, but in weak-signal areas it may cause picture breakup on digital TV or poor reception on FM radio. If signal loss is a problem, consider an active aerial amplifier instead of a passive splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe splitter is not weatherproof and is intended for indoor use only. For outdoor signal splitting, use a weatherproof junction box or an external aerial amplifier rated for outdoor installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with satellite signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This splitter is designed for terrestrial TV aerial and FM radio signals only. Satellite signals require a different type of splitter that can pass DC voltage to the LNB.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan more than two devices be connected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot directly. For distribution to three or more devices, use a dedicated multi-way aerial splitter or distribution amplifier designed for that purpose.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313110606091,"sku":"122.048UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122048UK_0.jpg?v=1784889355"},{"product_id":"av-link-coaxial-y-splitter-1-plug-2-sockets","title":"AV:Link Coaxial Y-Splitter 1 Plug 2 Sockets","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link coaxial Y-splitter has one male coaxial plug (input) and two female coaxial sockets (outputs), allowing a single aerial or FM radio feed to be distributed to two devices. The splitter body is a moulded plastic hexagon with three nickel-plated coaxial connectors: one on the left for the incoming signal, and two at angles on the right for the outgoing feeds.\u003c\/p\u003e\n\u003cp\u003eCommon applications include splitting a rooftop TV aerial to feed two televisions in different rooms, or splitting an FM radio aerial to supply two hi-fi tuners without running separate cables from the aerial point. The splitter introduces approximately 3-4dB signal loss on each output due to passive splitting, so the incoming signal strength must be sufficient to maintain picture or sound quality on both connected devices.\u003c\/p\u003e\n\u003cp\u003eThe nickel-plated connectors resist corrosion and provide stable RF contact. The splitter accepts standard F-type or Belling-Lee coaxial plugs (depending on the specific connector standard used in your installation) and fits behind wall plates or within AV cabinets where space is limited. Supplied in a sealed bag.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoaxial (Aerial)\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the splitter amplify the signal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a passive splitter, which means it divides the incoming signal between the two outputs without amplification. Each output receives approximately half the input signal strength, resulting in a 3-4dB loss per output. If the incoming signal is weak, you may need an amplified splitter or a separate signal booster.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat type of coaxial connector does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe product image shows standard coaxial barrel connectors. Confirm the specific connector type (F-type or Belling-Lee) before ordering if your installation requires a particular standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for satellite signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePassive coaxial splitters are generally not suitable for satellite signals because satellite installations often require specific voltage and tone signalling to control LNBs. This splitter is designed for terrestrial TV and FM radio aerial splitting only.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313110704395,"sku":"122.051UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122051UK_0.jpg?v=1784889369"},{"product_id":"av-link-right-angle-hdmi-plug-to-socket-adapter-gold-plated","title":"AV:Link Right Angle HDMI Plug to Socket Adapter - Gold Plated","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link right-angle HDMI adapter converts a straight HDMI cable to a 90-degree orientation, with a male HDMI plug on one end and a female HDMI socket on the other. The plug end sits at a right angle to the socket end, allowing HDMI cables to run flat against a wall or downwards from a tight-clearance connection point instead of projecting straight out.\u003c\/p\u003e\n\u003cp\u003eDesigned for wall-mounted TVs, media players installed in confined cabinet spaces, and equipment racks where standard straight HDMI cables would protrude too far from the back panel, the adapter reduces the clearance needed behind the connected device by routing the cable parallel to the surface. Both connectors carry gold-plated pins to maintain signal integrity across the full HDMI bandwidth, supporting 4K video, multi-channel audio and HDCP copy protection without signal degradation.\u003c\/p\u003e\n\u003cp\u003eThe compact adapter body measures approximately 40mm long from plug tip to socket opening, with a molded plastic shell that protects the internal wiring from repeated connection cycles. The right-angle orientation bends the cable run downwards when the plug is inserted horizontally, or sideways when inserted vertically, giving flexibility to route cables in whichever direction the installation demands. The adapter works with all standard HDMI cable types including High Speed HDMI and HDMI with Ethernet variants.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHDMI\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this support 4K and HDR video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adapter maintains full HDMI signal integrity including 4K resolution, HDR metadata, multi-channel audio and HDCP copy protection. It works as a passive connector with no active electronics that would limit bandwidth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich direction does the cable exit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe HDMI plug end sits at 90 degrees to the socket end. When the plug is inserted into a device, the socket opening points perpendicular to the plug direction, allowing the connected cable to run flat against a wall or downwards depending on how the adapter is oriented.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with HDMI cables that have bulky connector housings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adapter works with standard HDMI cables. Very thick or over-moulded cable connectors may be too large to fit the socket opening. Measure the cable connector width before ordering if the cable housing is unusually bulky.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in both directions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. HDMI is bidirectional for standard video and audio signals. The adapter can convert a source device output or a display device input depending on which end you connect to which equipment.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313113325835,"sku":"122.399UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122399UK_0.jpg?v=1784889386"},{"product_id":"av-link-hdmi-female-to-female-coupler-adapter","title":"AV:Link HDMI Female to Female Coupler Adapter","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link HDMI coupler is a female-to-female adapter with HDMI sockets at both ends, designed to join two standard HDMI cables into a single extended run. The coupler supports video resolutions up to 3840 x 2160p (4K) and uses gold-plated contacts to maintain signal integrity across the join.\u003c\/p\u003e\n\u003cp\u003eUsed where a single HDMI cable is too short to reach between a source device and a display, the coupler allows two existing cables to be connected end-to-end without needing to replace either cable. Common applications include extending runs between wall-mounted TVs and AV receivers, projectors and media players, or games consoles and displays where furniture layout or room dimensions prevent a direct single-cable connection.\u003c\/p\u003e\n\u003cp\u003eThe moulded plastic body measures approximately 40mm long and provides strain relief at both socket ends, reducing wear on the cable plugs when the coupler is used in semi-permanent installations behind furniture or within wall cavities. The compact form factor allows the join to sit close to walls or within cable management channels without requiring significant clearance space.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eVideo resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 × 2160p (4K)\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this support 4K at 60Hz?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe coupler supports 4K resolution up to 3840 x 2160p. Whether it passes 60Hz refresh rate depends on the HDMI version of the cables being joined. The coupler itself is passive and does not limit refresh rate beyond what the connected cables support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with older HDMI cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The coupler is backwards-compatible with all HDMI cable versions (1.4, 2.0, 2.1). The final signal capability is determined by the oldest component in the chain, whether that's the source device, the cables, or the display.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used to join two long HDMI cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHDMI signal degradation increases with cable length. Joining two cables via a passive coupler creates a longer total run, which may result in dropouts or loss of picture quality on runs exceeding 10-15m total length, particularly at 4K resolution. For runs beyond this, an active HDMI repeater or booster is recommended instead of a passive coupler.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313113391371,"sku":"122.403UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122403UK_0.jpg?v=1784889400"},{"product_id":"av-link-scart-to-rca-s-video-switchable-adaptor","title":"AV:Link Scart to RCA \u0026 S-Video Switchable Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link Scart adaptor converts between a 21-pin Scart connector and three RCA phono sockets (composite video yellow, audio left white, audio right red) plus a 4-pin S-Video socket. A slide switch on the body selects whether the adaptor operates as an input (feeding signal from RCA\/S-Video devices into a Scart socket on a TV) or output (feeding signal from a Scart source out to RCA\/S-Video recorders or displays).\u003c\/p\u003e\n\u003cp\u003eDesigned for connecting legacy equipment where one device uses Scart and the other uses RCA composite or S-Video, the adaptor suits VCRs, DVD players, set-top boxes, camcorders and older game consoles to CRT and early flatscreen TVs with Scart inputs. The switch avoids the need for separate input-only and output-only adaptors when connecting multiple devices in different directions.\u003c\/p\u003e\n\u003cp\u003eThe adaptor body measures 57 x 22 x 51mm and weighs 34g, sitting behind the TV or equipment without strain on the Scart socket. The black plastic housing holds all connections on one face, with the Scart plug protruding from the opposite side. When using S-Video, connect to the S-Video socket and leave the yellow RCA composite socket unused. S-Video carries higher-quality separated luminance and chrominance signals than composite.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003eScart, RCA, S-Video\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e57mm x 22mm x 51mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the input\/output switch do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe switch changes the signal direction. Set to 'input' when feeding RCA or S-Video devices into a TV's Scart socket. Set to 'output' when taking a Scart source signal out to RCA or S-Video displays or recorders. The wrong setting will result in no signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use RCA and S-Video at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Use either the three RCA sockets (composite video + stereo audio) or the S-Video socket (video only, requiring separate audio connection). S-Video provides better picture quality than composite when both devices support it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it convert PAL to NTSC or vice versa?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adaptor is a passive connector change only. It does not convert signal standards, resolutions or formats. Both devices must use the same video standard (PAL, NTSC, SECAM) for the signal to display correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with modern HDMI TVs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnly if the TV has a Scart input socket, which is rare on models manufactured after approximately 2010. For HDMI-only TVs you would need an active video converter box rather than this passive adaptor.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313113456907,"sku":"122.410UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122410UK_0.jpg?v=1784889419"},{"product_id":"av-link-hdmi-socket-to-hdmi-micro-plug-adaptor","title":"AV:Link HDMI Socket to HDMI Micro Plug Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link HDMI adaptor connects a standard HDMI cable to devices with HDMI micro ports, providing a full-size Type-A HDMI socket on one end and a Type-D micro HDMI plug on the other. Both ends carry gold-plated contacts to maintain signal integrity across the short 40mm length of the adaptor body.\u003c\/p\u003e\n\u003cp\u003eDesigned for Raspberry Pi single-board computers, compact cameras, camcorders and tablets that ship with micro HDMI outputs, this adaptor removes the need to carry a dedicated micro HDMI cable. It allows any existing standard HDMI cable to be used with micro-equipped devices, making it practical for temporary connections, testing setups and environments where multiple HDMI cables are already in use.\u003c\/p\u003e\n\u003cp\u003eThe compact 40mm body fits directly into the micro HDMI port without additional cable or strain relief, so it works best in situations where the connected HDMI cable is supported separately or where the device is stationary. The 8.5g weight means the adaptor adds minimal load to the micro port itself, though care should still be taken not to use the adaptor as a lever against the port when inserting or removing cables.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.01KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e40mm x 11mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHDMI F to micro M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between HDMI micro and HDMI mini?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHDMI micro (Type-D) is smaller than HDMI mini (Type-C). This adaptor is specifically for micro HDMI ports, which are commonly found on Raspberry Pi 4, action cameras and some tablets. It will not fit HDMI mini ports.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support 4K video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor itself is a passive connector and does not alter the signal. It will pass whatever resolution the source device and cable support, including 4K where both are capable. However, signal quality depends on the total cable length and quality once the adaptor is in place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be left permanently connected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, though the micro HDMI plug is not designed for frequent insertion and removal. If the device will be connected and disconnected regularly, consider using a short micro HDMI cable instead to reduce wear on the device's port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require drivers or software?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adaptor is a passive connector with no active components. It works immediately when inserted, with no configuration needed on the source device or display.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313113522443,"sku":"122.413UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122413UK_0.jpg?v=1784889434"},{"product_id":"av-link-scart-to-hdmi-converter-720p-1080p-usb-powered","title":"AV:Link Scart to HDMI Converter 720p\/1080p - USB Powered","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link Scart to HDMI converter takes analogue video signals from a Scart output and converts them to digital HDMI at either 720p or 1080p resolution, selected via a switch on the unit. The converter accepts PAL, NTSC 3.58\/4.43, SECAM, PAL\/M and PAL\/N input formats, allowing it to work with video equipment from different regions and broadcast standards.\u003c\/p\u003e\n\u003cp\u003eDesigned for connecting older VCRs, DVD players, set-top boxes and games consoles to modern HDMI televisions and monitors, the converter bridges the analogue-to-digital gap without requiring the source device to have component or composite outputs. The unit is powered by USB via the included cable, which can run from a TV's USB port, a mains USB adapter, or a powered USB hub. Maximum supported cable lengths are 8m on the Scart input side and 7m on the HDMI output side before signal degradation becomes a risk.\u003c\/p\u003e\n\u003cp\u003eThe compact 88.5 x 57.5 x 25mm casing sits between devices without occupying significant shelf or cabinet space, and the 60g weight means it can be cable-suspended if the source device sits on a higher shelf. The unit draws a maximum of 350mA at 5V DC during operation, well within the capacity of most TV USB ports rated at 500mA or above. No driver installation or configuration software is needed. Connect the cables, select the output resolution, and the converter begins passing video and audio immediately.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003eScart (PAL, NTSC3\/4, 43 SECAM, PAL\/M, PAL\/N)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003eHDMI (720p, 1080p)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. cable length\u003c\/td\u003e\n\u003ctd\u003eScart input \u0026lt;=8m; HDMI output \u0026lt;=7m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e350mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-10° to 55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower : input\u003c\/td\u003e\n\u003ctd\u003eDC\/5V 1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e88.5mm x 57.5mm x 25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.06KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122416UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it convert audio as well as video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Scart connection carries both video and stereo audio, and both are converted and passed through the HDMI output to the display device.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I power it from the TV's USB port?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost modern TVs provide 500mA or more from their USB ports, which is sufficient for the converter's 350mA maximum draw. If the TV's USB port is rated lower or powers off when the TV is in standby, use a mains USB adapter instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between 720p and 1080p output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e720p outputs at 1280 x 720 resolution, 1080p at 1920 x 1080. The source Scart signal is analogue and lower resolution than either, so the converter upscales the image. Use 1080p if your display is Full HD or above; use 720p for older HD Ready displays or if the image appears over-processed at 1080p.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with NTSC video from non-UK sources?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The converter supports NTSC 3.58, NTSC 4.43, SECAM, PAL\/M and PAL\/N in addition to standard PAL, so it handles video from North American, French and other regional broadcast standards.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313113587979,"sku":"122.416UK","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122416UK_0.jpg?v=1784889449"},{"product_id":"av-link-hdmi-to-scart-converter-pal-ntsc","title":"AV:Link HDMI to Scart Converter - PAL\/NTSC","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link HDMI to Scart converter accepts HDMI v1.3 video signals at up to 60fps and converts them to analogue Scart output in either PAL or NTSC format. The converter handles digital-to-analogue conversion in real-time without adding lag, allowing modern HDMI sources to connect to older Scart-equipped televisions and projectors that lack HDMI inputs.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with Blu-ray players, games consoles, Sky HD boxes, laptops and other HDMI-output devices, the converter sits inline between the source and the display. A PAL\/NTSC switch on the unit selects the output format to match the requirements of the connected display. The converter draws power via a USB cable (included) from a USB port on the source device or a separate USB mains adapter.\u003c\/p\u003e\n\u003cp\u003eThe compact black enclosure measures 88.5 x 57.5 x 25mm and weighs 60g, sitting discreetly behind a TV or alongside AV equipment. The HDMI input accepts cables up to 7m in length, while the Scart output supports cables up to 8m, giving flexibility in placement. The converter operates across a temperature range of -10°C to 55°C and requires no drivers or software installation. Connection and format selection are the only setup steps required.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003eHDMI (up to 1080p @ 60Hz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003eScart (PAL\/NTSC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e300MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e10.2 Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. cable length\u003c\/td\u003e\n\u003ctd\u003eHDMI Input \u0026lt;= 7m; Scart output \u0026lt;=8m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e600mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-10°C to 55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower : input\u003c\/td\u003e\n\u003ctd\u003eDC\/5V 1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e88.5mm x 57.5mm x 25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.06KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122417UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between PAL and NTSC output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePAL is the broadcast standard used in the UK, Europe, Australia and most of the world outside North America and Japan. NTSC is used primarily in North America and Japan. UK and European Scart TVs require PAL output. The converter includes a physical switch to select the correct format for your display.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it convert audio as well as video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The converter processes both the video and audio components of the HDMI signal and outputs them through the Scart connector. The Scart output carries stereo audio alongside the composite video signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat powers the converter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe converter draws 5V DC power via a USB cable (included). You can power it from a USB port on your source device (such as a Blu-ray player or games console) or from a separate USB mains adapter. Maximum current draw is 600mA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there any lag or delay in the conversion?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The converter performs real-time digital-to-analogue conversion with no perceptible delay, making it suitable for gaming and live broadcast where timing matters.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313113653515,"sku":"122.417UK","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122417UK_0.jpg?v=1784889466"},{"product_id":"vga-to-hdmi-adapter-with-audio-full-hd-1080p-converter-kit","title":"VGA to HDMI Adapter with Audio - Full HD 1080p Converter Kit","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis VGA to HDMI adapter kit converts analogue VGA video and 3.5mm audio signals into a single HDMI output supporting resolutions up to 1080p Full HD. The kit comprises a VGA male connector, a 3.5mm audio jack input, an HDMI female socket and a micro USB power input, all housed in a compact 260 x 40 x 15mm converter box with a 15cm integrated VGA cable.\u003c\/p\u003e\n\u003cp\u003eDesigned for connecting older laptops, PCs and presentation equipment with VGA output to modern HDMI-compatible displays, projectors and televisions, the adapter requires active power via the included micro USB cable to perform the analogue-to-digital conversion. The VGA side accepts standard 15-pin D-sub connectors carrying RGB video, while the 3.5mm jack input captures stereo audio that is then embedded into the HDMI stream. You will need a separate HDMI cable to connect the adapter's HDMI socket to your display.\u003c\/p\u003e\n\u003cp\u003eThe converter handles standard VGA resolutions including 640x480, 800x600, 1024x768, 1280x720 and 1920x1080, automatically detecting the input resolution and scaling to match the display's native resolution where needed. The micro USB power cable can be powered from a USB port on the source device, a USB mains adapter, or a USB power bank. At 50g total weight, the adapter sits behind a display without strain on the HDMI socket and is suitable for fixed installation or portable presentation use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. resolution\u003c\/td\u003e\n\u003ctd\u003e1080p\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e15cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e260mm x 40mm x 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.05KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adapter require external power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The kit includes a micro USB cable that must be connected to a USB power source (USB port on a PC, USB mains adapter, or power bank) to perform the analogue-to-digital conversion. Without power the adapter will not output a signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cables are included in the kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit includes the converter unit with an integrated 15cm VGA cable and a micro USB power cable. You will need to supply your own HDMI cable to connect from the adapter's HDMI socket to your display, and a 3.5mm audio cable if your source device has a separate audio output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with a MacBook or older laptop?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided your laptop has a VGA output port. Most laptops built before 2012 included VGA output. If your laptop only has HDMI, DisplayPort or USB-C output, this adapter is not suitable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the adapter support audio?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 3.5mm audio input on the converter accepts stereo audio from a headphone or line-out socket, which is then embedded into the HDMI output stream. If your VGA source device has no separate audio output, the HDMI stream will carry video only.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313114898699,"sku":"122.423UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122423UK_0.jpg?v=1784889491"},{"product_id":"av-link-displayport-to-hdmi-adapter-cable-0-2m-4k-uhd","title":"AV:Link DisplayPort to HDMI Adapter Cable 0.2m - 4K UHD","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link DisplayPort to HDMI adapter is a 0.2m passive cable that converts a DisplayPort source (male plug) to an HDMI output (female socket). The cable supports digital video up to 4K UHD resolution (3840×2160 at 30Hz) and carries embedded multi-channel audio, making it suitable for connecting PCs, laptops and graphics cards with DisplayPort outputs to HDMI-compatible monitors, TVs and projectors.\u003c\/p\u003e\n\u003cp\u003eDesigned for desktop workstation setups, home office dual-monitor configurations and AV presentation systems where the source device has DisplayPort but the display requires HDMI input. The 0.2m length keeps cable runs short behind a desk or wall-mounted display, reducing clutter. You will need a separate HDMI cable to run from the adapter's socket to your display. The adapter acts as the signal converter at the source end.\u003c\/p\u003e\n\u003cp\u003eThe cable uses a unidirectional passive conversion circuit housed in the DisplayPort plug end, so signal flow is DisplayPort input to HDMI output only. It cannot convert HDMI to DisplayPort in reverse. The 4.5mm cable diameter and compact plug housings allow the adapter to fit alongside other cables in tight spaces behind monitors or in desktop cable management trays. At 30g total weight, the adapter puts minimal strain on laptop and PC ports.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. resolution\u003c\/td\u003e\n\u003ctd\u003e4K (3840×2160)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e13.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e245mm x 45mm x 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adapter work in both directions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a unidirectional adapter that converts DisplayPort output to HDMI input only. It cannot convert an HDMI source to DisplayPort. The conversion circuit is built into the DisplayPort plug end and requires the DisplayPort source to provide the signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat refresh rate does it support at 4K resolution?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adapter supports 4K UHD (3840×2160) at 30Hz refresh rate. For higher refresh rates at 4K you would need an active adapter with external power, as passive cables are limited by the bandwidth available from the DisplayPort source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a separate HDMI cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. This adapter has a female HDMI socket on one end, so you need a standard male-to-male HDMI cable to run from the adapter to your display. The adapter sits at the source end (PC or laptop) and converts the signal before it travels down the HDMI cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it carry audio as well as video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adapter passes embedded multi-channel audio from the DisplayPort source through to the HDMI output, provided the source is configured to send audio over DisplayPort. Check your PC or laptop audio settings to ensure DisplayPort audio output is enabled.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313114964235,"sku":"122.425UK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122425UK_0.jpg?v=1784889506"},{"product_id":"av-link-displayport-to-vga-adapter-cable-15cm","title":"AV:Link DisplayPort to VGA Adapter Cable - 15cm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link DisplayPort to VGA adapter is a 15cm cable that converts digital DisplayPort signals to analogue VGA output, allowing computers with DisplayPort outputs to connect to older VGA monitors and projectors. The adapter features a DisplayPort plug on one end and a VGA socket on the other, requiring a standard VGA cable (sold separately) to complete the connection to the display.\u003c\/p\u003e\n\u003cp\u003eDesigned for office, education and home setups where newer laptops or PCs need to connect to legacy VGA displays, the adapter handles the digital-to-analogue conversion internally. This makes it useful for presentation rooms, classrooms and home offices that still rely on older projectors or monitors without HDMI or DisplayPort inputs. The 15cm cable length keeps the adapter close to the source device, minimising cable clutter.\u003c\/p\u003e\n\u003cp\u003eThe adapter weighs 34g and measures 240 x 45 x 15mm including connectors, making it compact enough to carry in a laptop bag for mobile presentations. The VGA socket accepts any standard VGA cable, giving flexibility to use existing cabling infrastructure without replacing monitors or projectors that still function reliably.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e15cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e240mm x 45mm x 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adapter require external power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adapter draws power from the DisplayPort connection on the source device, so no external power supply is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included in the box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adapter cable only. A separate VGA cable is required to connect the VGA socket on the adapter to your monitor or projector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support audio output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. VGA is a video-only standard, so audio signals are not carried through this adapter. Audio will need to be routed separately from the source device to speakers or the display's audio input if available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat resolution does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDisplayPort to VGA adapters typically support resolutions up to 1920 x 1200 or 1080p, depending on the source device and display capabilities. Higher resolutions may not be supported due to VGA bandwidth limits.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313115029771,"sku":"122.427UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122427UK_0.jpg?v=1784889521"},{"product_id":"av-link-usb-c-to-3-5mm-headphone-jack-adapter-with-built-in-dac","title":"AV:Link USB-C to 3.5mm Headphone Jack Adapter with Built-In DAC","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link USB-C to 3.5mm adapter converts a USB Type-C port on smartphones, tablets and laptops into a standard 3.5mm headphone socket. An integrated DAC (digital-to-analogue converter) chip inside the adapter body processes the digital audio signal from the USB-C port and outputs it as an analogue signal to the 3.5mm jack, allowing conventional wired headphones to work with devices that no longer carry a dedicated headphone socket.\u003c\/p\u003e\n\u003cp\u003eThe adapter suits daily use with modern Android smartphones, tablets, and USB-C equipped laptops where a 3.5mm headphone output has been removed from the hardware. The 140mm total length (including both the USB-C plug and the 3.5mm socket ends) gives enough cable to reach from a device in a pocket or on a desk to headphones worn at ear level without strain on the connection. The adapter weighs 4g and can be coiled or left plugged into headphones when not in use.\u003c\/p\u003e\n\u003cp\u003eThe DAC chip inside the adapter ensures compatibility with a range of USB-C devices that support audio-over-USB-C protocols. Not all USB-C ports output audio. Some USB-C ports are data-only or charge-only. So compatibility depends on whether the source device supports the USB Audio Class standard. The adapter outputs analogue audio, so it works with passive headphones, earbuds and headsets with in-line microphone controls.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e4.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e140mm x 10mm x 8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with all USB-C devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adapter works with USB-C devices that support audio output over USB-C (USB Audio Class standard). Most modern Android smartphones and tablets support this, but some USB-C ports are data-only or charge-only and will not output audio. Check your device specifications before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the DAC and why is it needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe DAC (digital-to-analogue converter) chip inside the adapter converts the digital audio signal from the USB-C port into an analogue signal that conventional 3.5mm headphones can use. Without the DAC, passive headphones would not work with a USB-C audio output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with headphones that have in-line controls?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adapter outputs analogue audio, so it supports passive headphones, earbuds and headsets with in-line microphone and playback controls, provided the controls are compatible with your source device.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe total length from USB-C plug to 3.5mm socket is 140mm, with the cable section itself measuring 45mm. This gives enough reach to connect from a device in a pocket or on a desk to headphones at ear level without strain on the connectors.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313115160843,"sku":"122.430UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122430UK_0.jpg?v=1784889540"},{"product_id":"av-link-usb-c-to-hdmi-adaptor-lead-4k-30hz-digital-converter","title":"AV:Link USB-C to HDMI Adaptor Lead - 4K @ 30Hz Digital Converter","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link USB-C to HDMI adaptor lead converts a USB3.1 Type-C output to a female HDMI socket, allowing laptops, tablets and smartphones with USB-C ports to output video and audio to HDMI displays. The adaptor includes a built-in digital-to-analogue converter (DAC) that processes the USB-C signal into HDMI format, supporting resolutions up to 4K @ 30Hz.\u003c\/p\u003e\n\u003cp\u003eDesigned for presentation, home entertainment and remote working scenarios where a USB-C device needs to connect to a projector, monitor or television. The 16.5cm cable gives enough reach to position the HDMI connection away from the device port without adding slack cable to manage. The adaptor is bus-powered from the USB-C port, so no external power supply is needed for typical use cases.\u003c\/p\u003e\n\u003cp\u003eThe compact housing measures 240mm x 12mm x 21mm and weighs 16g, making it portable enough to carry in a laptop bag or presentation kit. The HDMI socket accepts a standard HDMI cable (sold separately) up to HDMI 1.4 specification, which carries both video and audio streams from the source device. Compatibility depends on the source device supporting USB-C DisplayPort Alternate Mode or Thunderbolt 3\/4.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e16.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. resolution\u003c\/td\u003e\n\u003ctd\u003e4K @ 30Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e240mm x 12mm x 21mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.02KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adaptor support audio as well as video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. When connected to a compatible USB-C source device, the adaptor carries both video and audio signals over the HDMI output, allowing sound to play through the connected display or through the display's audio output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat devices is this compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor works with USB-C devices that support DisplayPort Alternate Mode or Thunderbolt 3\/4. This includes most modern laptops, tablets and smartphones with USB-C ports, but compatibility varies by manufacturer. Check your device specifications before purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum resolution supported?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor supports resolutions up to 4K (3840 x 2160 pixels) at 30Hz refresh rate. For higher refresh rates (60Hz or above), a lower resolution such as 1080p may be required depending on the source device and HDMI cable used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this require external power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adaptor draws power from the USB-C port on the source device. For devices with limited power output or when driving very long HDMI cables, an externally powered HDMI adaptor may be required.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313115193611,"sku":"122.431UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122431UK_0.jpg?v=1784889555"},{"product_id":"av-link-usb-3-0-type-c-socket-to-type-a-otg-plug-adaptor","title":"AV:Link USB 3.0 Type-C Socket to Type-A OTG Plug Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link USB 3.0 Type-C to Type-A OTG adaptor converts a USB Type-C plug into a Type-A connection, enabling USB-C devices to connect to standard USB-A ports for data transfer and charging. The adaptor supports USB 3.0 data transfer speeds up to 5Gbps, allowing quick file transfers between smartphones, tablets, laptops and desktop computers fitted with Type-A USB sockets.\u003c\/p\u003e\n\u003cp\u003eDesigned for on-the-go use, the adaptor measures 32 x 14 x 6mm and weighs 4g, making it small enough to carry in a laptop bag or pocket without bulk. The OTG (On-The-Go) specification allows compatible devices to act as either host or peripheral, so a smartphone can read data from a USB flash drive or external hard drive fitted with a Type-A plug when connected via this adaptor. The plug-and-play design requires no drivers on Windows, macOS, Linux or Android systems that support OTG.\u003c\/p\u003e\n\u003cp\u003eThe Type-C socket end accepts any standard USB-C plug, while the Type-A plug end fits any USB-A port including those found on older laptops, desktop PCs, car chargers and power banks. The compact plastic housing protects the internal contacts and provides strain relief where the cable enters each connector. The adaptor works with both USB 3.0 and USB 2.0 ports, automatically negotiating the highest supported speed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eData transfer rate\u003c\/td\u003e\n\u003ctd\u003eUp to 5Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e32mm x 14mm x 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adaptor support fast charging?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor passes through the power delivery capabilities of the USB-A port it's connected to. If the Type-A port supports higher current output (e.g. 2.4A or greater), the adaptor will pass that current to the connected USB-C device. It does not support USB-C Power Delivery fast charging protocols, which require a direct Type-C connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with USB-C to USB-C cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This adaptor has a Type-C socket and a Type-A plug, so it's designed to connect a USB-C device (or USB-C cable) to a Type-A port. To connect a USB-C device to another USB-C port, use a direct USB-C to USB-C cable instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat devices support OTG functionality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost modern Android smartphones and tablets support OTG, allowing them to act as a host and read data from USB storage devices, keyboards or other peripherals. Apple iOS devices do not support standard USB OTG. Check your device specifications or settings to confirm OTG support before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with USB 2.0 ports?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adaptor works with both USB 3.0 and USB 2.0 Type-A ports. When connected to a USB 2.0 port, data transfer speeds are limited to 480Mbps (USB 2.0 maximum) rather than the 5Gbps USB 3.0 speed.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313115259147,"sku":"122.433UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122433UK_0.jpg?v=1784889573"},{"product_id":"av-link-usb-3-0-type-a-socket-to-type-c-plug-otg-adaptor","title":"AV:Link USB 3.0 Type-A Socket to Type-C Plug OTG Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link USB 3.0 Type-A to Type-C OTG adaptor converts a USB 3.0 Type-A socket into a USB Type-C plug, supporting data transfer rates up to 5Gbps. The adaptor measures 31 x 15 x 7mm and weighs 4g, making it small enough to keep attached to a cable or in a laptop bag without adding bulk.\u003c\/p\u003e\n\u003cp\u003eDesigned for on-the-go sync and charge applications, the adaptor allows USB-A peripherals (flash drives, keyboards, mice, external hard drives) to connect to devices with USB-C ports such as modern laptops, tablets and smartphones. The plug-and-play operation requires no drivers or software installation on Windows, macOS, Linux or Android systems.\u003c\/p\u003e\n\u003cp\u003eThe USB 3.0 specification supports backward compatibility with USB 2.0 devices, though transfer speeds will be limited to the slower device's maximum rate. The compact form factor means the adaptor sits close to the port without placing twisting stress on the USB-C socket, reducing the risk of port damage compared to longer or heavier adapters.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eData transfer rate\u003c\/td\u003e\n\u003ctd\u003eUp to 5Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e31mm x 15mm x 7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adaptor support charging as well as data transfer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adaptor supports both sync and charge applications, allowing USB-A charging cables to connect to USB-C devices. Charging speed depends on the power output of the USB-A source and the device being charged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with USB 2.0 devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The USB 3.0 specification is backward compatible with USB 2.0. If you connect a USB 2.0 device through this adaptor, the transfer speed will be limited to USB 2.0's maximum of 480Mbps rather than the 5Gbps the adaptor supports.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with all USB-C devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor works with any device that has a USB-C port supporting USB 3.0 or USB 2.0 protocols. It does not support video output (DisplayPort Alt Mode) or Thunderbolt protocols.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require drivers or software?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adaptor uses standard USB protocols and works plug-and-play on Windows, macOS, Linux and Android without requiring driver installation.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313115324683,"sku":"122.434UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122434UK_0.jpg?v=1784889589"},{"product_id":"hdmi-to-vga-adapter-cable-with-usb-power-140mm-lead","title":"HDMI to VGA Adapter Cable with USB Power - 140mm Lead","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis AV:Link HDMI to VGA adapter cable converts a digital HDMI output from a laptop, PC or media device into an analogue VGA signal for connection to older monitors, projectors and displays that lack HDMI inputs. The adapter houses a digital-to-analogue converter chip in a compact 45mm housing, with a 140mm HDMI cable on one side and a female VGA socket plus USB power input on the other.\u003c\/p\u003e\n\u003cp\u003eDesigned for conference rooms, classrooms and home offices where newer laptops need to connect to legacy VGA projectors or monitors, the adapter removes the need for a separate converter box. The USB power input draws from a laptop USB port or mains USB charger to power the internal conversion chip, as VGA alone cannot supply power. The gold-plated HDMI connector ensures stable signal transfer from the source device.\u003c\/p\u003e\n\u003cp\u003eThe adapter converts video only. VGA does not carry audio, so a separate 3.5mm audio cable from the source device to external speakers is needed if sound is required. The 140mm HDMI lead gives enough length to route from a laptop HDMI port to the edge of a desk, where the VGA socket accepts a standard male-to-male VGA cable running to the display. The compact housing and short lead length keep cable clutter minimal in portable setups.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e140mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e235mm x 45mm x 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adapter carry audio?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. VGA is a video-only standard and cannot carry audio. If your display has speakers, you will need a separate 3.5mm audio cable from the source device's headphone socket to the display's audio input or to external speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does it need USB power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adapter contains a digital-to-analogue converter chip that requires power to operate. HDMI can output power but VGA cannot, so the USB input draws power from a laptop USB port or mains USB charger to run the conversion circuitry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable connects the VGA socket to the display?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou will need a separate male-to-male VGA cable (not included) to run from the female VGA socket on this adapter to the male VGA input on your monitor or projector. VGA cables are available separately in various lengths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with 4K HDMI sources?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVGA supports a maximum resolution of 1920x1200 at 60Hz. If the HDMI source outputs 4K, the adapter will down-convert the signal to the maximum resolution the VGA display can handle, typically 1080p or lower depending on the monitor.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313116471563,"sku":"122.437UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122437UK_0.jpg?v=1784889605"},{"product_id":"av-link-3-5mm-stereo-jack-wall-plate-module-white-with-female-fly-lead","title":"AV:Link 3.5mm Stereo Wall Plate Module in White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link wall plate module presents a front-facing 3.5mm stereo jack socket in a white 50mm x 25mm clip-in unit, with a 20mm female fly lead extending from the rear. The front socket accepts standard 3.5mm stereo jack plugs from headphones, portable speakers or audio devices, while the rear tail connects to an audio source cable concealed behind the wall.\u003c\/p\u003e\n\u003cp\u003eDesigned for permanent audio connection points in homes, offices, schools and commercial spaces, the module eliminates trailing cables across floors and desks by routing audio through the wall cavity. The module clips into compatible grid frames (AVSL 122.500UK single-gang or 122.505UK double-gang frames, sold separately) which mount onto standard UK back boxes, allowing multiple audio or AV modules to be combined in a single faceplate.\u003c\/p\u003e\n\u003cp\u003eThe white finish matches standard UK electrical accessories and blends into light-coloured walls. At 13g the module adds minimal weight to a multi-module grid plate. The 50mm x 25mm footprint is a single-width grid module, so two of these can fit side-by-side in a double-gang frame to create left and right channel connection points for stereo systems.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e50mm x 25mm x 200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.01KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat grid frame does this fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module clips into AV:Link 122.500UK (single-gang) or 122.505UK (double-gang) grid frames. These frames are sold separately and mount onto standard UK 25mm back boxes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the rear fly lead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe female tail extends 20mm from the back of the module. This connects to a 3.5mm male jack cable routed through the wall cavity to the audio source location.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan two modules be used for stereo?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Two of these 50mm-wide modules fit side-by-side in a double-gang 122.505UK frame, allowing separate left and right channel connection points for a stereo system. Each module would connect via its rear tail to the corresponding left or right output cable from the audio source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for speaker-level signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module is designed for line-level audio signals from headphone outputs, portable devices and pre-amplified sources. It is not rated for amplified speaker-level signals which require higher-gauge cable and different connector types.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313118241035,"sku":"122.525UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122525UK_0.jpg?v=1784889635"},{"product_id":"av-link-hdmi-wall-plate-module-socket-to-female-tail","title":"AV:Link HDMI Wall Plate Module - Socket to Female Tail","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link HDMI wall plate module is a 50mm x 25mm euromodule with a gold-plated HDMI 2.0 socket on the front faceplate and a 15mm female HDMI tail extending from the rear. The module clips into standard 25mm euromodule frames (AV:Link frames 122.500UK and 122.505UK are compatible), allowing HDMI sources to be connected at the wall plate without exposed cable runs.\u003c\/p\u003e\n\u003cp\u003eDesigned for domestic AV installations, commercial conference rooms and educational settings where display devices are mounted separately from source equipment, the module allows an HDMI cable to run behind the wall or through conduit between the source location and the display. The female tail at the rear of the module accepts a standard male HDMI plug from the source equipment, while the front socket accepts the HDMI cable running to the display.\u003c\/p\u003e\n\u003cp\u003eThe gold-plated contacts resist corrosion and provide better signal contact than unplated terminals, reducing the risk of intermittent connection or signal degradation over time. The HDMI 2.0 specification supports resolutions up to 4K at 60Hz, HDR pass-through, and audio return channel (ARC) where the display and source both support it. At 32g the module adds minimal weight to a wall plate assembly and the 50mm x 25mm footprint allows two modules to fit side-by-side in a standard twin-gang euromodule frame.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. resolution\u003c\/td\u003e\n\u003ctd\u003e3840 x 2160 @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e18Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e50mm x 25mm x 215mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat wall plate frames is this compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module clips into standard 25mm euromodule frames. AV:Link frames 122.500UK (single-gang) and 122.505UK (double-gang) are confirmed compatible. Other euromodule frames with 25mm apertures should also accept the module.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support 4K resolution?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The HDMI 2.0 specification supports resolutions up to 4K at 60Hz, along with HDR pass-through and audio return channel (ARC) where the connected devices support these features.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the female tail at the rear?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe female HDMI tail extends 15mm from the back of the module. When planning cable routing behind the wall plate, allow clearance for this tail plus the depth of the male HDMI plug that connects to it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan two modules fit in a twin-gang frame?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 50mm x 25mm footprint allows two modules to sit side-by-side in a standard double-gang euromodule frame, giving two HDMI connection points at a single wall plate location.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313119715595,"sku":"122.540UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122540UK_0.jpg?v=1784889702"},{"product_id":"mercury-2-way-satellite-f-splitter-5-2250mhz","title":"Mercury 2-Way Satellite F Splitter 5-2250MHz","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury 2-way satellite F splitter divides a single satellite feed into two outputs, allowing two receivers to connect to one dish through F-type coaxial connectors. The splitter supports frequencies from 5MHz to 2250MHz, covering standard satellite TV bands including Ku-band (10.7-12.75GHz downconverted to IF) and L-band signals from LNBs.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and light commercial satellite installations, the splitter fits into standard coaxial runs between an LNB and two receivers or set-top boxes. The zinc die-cast housing provides RF shielding to reduce interference and maintains impedance matching across the frequency range. The F-type connectors accept standard satellite coaxial cable with push-fit or threaded connection depending on the cable type used.\u003c\/p\u003e\n\u003cp\u003eThe splitter introduces signal loss (insertion loss) across both outputs, which is a normal characteristic of passive RF splitting. Most domestic satellite installations can accommodate this loss without needing additional amplification, provided the incoming signal strength from the LNB is adequate. For installations with long cable runs or multiple splits, checking signal levels after installation ensures reliable reception.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003e5MHz - 2250MHz\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan I connect two satellite boxes to one dish using this splitter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided both receivers are viewing channels from the same polarisation and frequency band at the same time. For independent viewing (different channels simultaneously), a twin or quad LNB on the dish is required instead, giving each receiver its own dedicated feed. A splitter shares one LNB output between two receivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cables does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe F-type connectors accept standard satellite coaxial cable (typically RG6 or CT100). The connectors are compatible with both push-fit F-connectors and threaded F-connectors depending on the cable preparation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the splitter need power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The Mercury is a passive splitter and does not require external power. It allows DC power pass-through from the receiver to the LNB on one output path, so ensure the powered receiver connects to the DC-pass port if your installation uses LNB power from the receiver.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313120534795,"sku":"122.807UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122807UK_0.jpg?v=1784885564"},{"product_id":"stv203-3-way-satellite-f-splitter-5-2450mhz","title":"STV203 3-Way Satellite F Splitter 5-2450MHz","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe STV203 is a 3-way satellite F splitter that divides one satellite feed into three separate outputs, operating across the 5-2450MHz frequency range. The unit features F-type threaded connectors on all four ports (one input, three outputs) and incorporates power pass functionality on every output, allowing voltage to pass through to LNBs on all connected receivers simultaneously.\u003c\/p\u003e\n\u003cp\u003eDesigned for multi-receiver satellite installations in homes, flats, caravans and commercial properties, the STV203 allows three satellite receivers or set-top boxes to operate from a single dish feed without requiring additional cabling runs. The zinc die-cast housing measures approximately 60mm x 40mm and mounts to walls or joists using the two flanged mounting tabs, each with a 6mm hole. The compact footprint suits installation behind wall plates or within distribution cabinets.\u003c\/p\u003e\n\u003cp\u003eThe 5-2450MHz bandwidth covers both standard satellite TV frequencies and the extended range used by modern Sky Q and Freesat systems. Power pass on all outputs means the splitter does not block the DC voltage that receivers send back up the coax to power the LNB at the dish, making it compatible with most domestic satellite setups. The unit carries CE certification under G687 659D and uses a zinc alloy body for shielding and durability.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003e5MHz - 2250MHz\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this splitter work with Sky Q systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 5-2450MHz frequency range covers the extended bandwidth used by Sky Q and other modern satellite systems. The power pass on all outputs allows voltage to reach the LNB from any connected receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill I lose signal strength when splitting to three outputs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome signal loss is inherent in any passive splitter. The STV203 divides the input signal across three outputs, which reduces the level at each receiver compared to a direct connection. For installations where receivers are close to the dish and signal strength is already good, this is rarely an issue. In marginal signal areas, amplification may be needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this to split terrestrial TV aerial signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe STV203 is designed for satellite installations and uses F-type connectors rather than the coax plugs typical of terrestrial aerial systems. While the frequency range technically covers terrestrial TV bands, the connector type makes it impractical for standard aerial distribution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the splitter mounted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo flanged mounting tabs with 6mm holes allow the unit to be screwed to a wall, joist or the back of a distribution cabinet. The compact size also allows it to be tucked behind wall plates or inside joinery where space is limited.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313123090699,"sku":"122.823UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122823UK_0.jpg?v=1784889778"},{"product_id":"stv-204-4-way-satellite-f-splitter-5-2250mhz","title":"STV 204 4-Way Satellite F Splitter 5-2250MHz","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe STV 204 is a 4-way satellite F splitter that distributes signal from a single satellite dish input to four independent receiver outputs across a frequency range of 5-2250MHz. Each output port features power pass capability, allowing receivers to send power back to the LNB at the dish head without blocking other receivers on the same splitter.\u003c\/p\u003e\n\u003cp\u003eMade for multi-room satellite installations where a single dish serves several receivers, the splitter fits between the dish cable run and the individual receiver feeds. The central input port connects to the dish LNB, while the four output ports run to separate set-top boxes or satellite receivers in different rooms. The power pass diagram printed on the faceplate shows the signal path and confirms which ports support LNB power injection.\u003c\/p\u003e\n\u003cp\u003eThe die-cast metal housing provides RF shielding to prevent signal leakage and interference between adjacent cables. All five F-connector ports are threaded for secure cable connections, and the two mounting lugs on either side allow the splitter to be fixed to a wall or inside a distribution cabinet. The unit carries CE certification and complies with German broadcast equipment standard BZT 660D.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003e5MHz - 2250MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with Sky Q and Freesat receivers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 5-2250MHz range covers both standard Ku-band satellite signals and the extended frequencies used by modern LNBs. The power pass on all ports supports systems where receivers need to communicate with or power the LNB.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan all four outputs supply power to the LNB simultaneously?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach output port supports power pass, but typically only one receiver sends power at a time. The STV 204 routes that power back to the input port and onwards to the LNB regardless of which output port the powered receiver is connected to.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat signal loss occurs when splitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 4-way passive splitter introduces approximately 7-8dB insertion loss per output. If you find weak signal on some receivers after installation, consider upgrading to a higher-gain LNB or adding a line amplifier before the splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need external power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The STV 204 is a passive splitter and draws no mains power. The power pass feature refers to DC voltage sent by the receiver to the LNB, not to powering the splitter itself.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313123156235,"sku":"122.838UK","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122838UK_CO1_19405c1f-634e-4a70-b1c4-1344346d07c0.jpg?v=1715187973"},{"product_id":"av-link-rca-composite-to-hdmi-upscaler-1080p","title":"AV:Link RCA Composite to HDMI Upscaler - 1080p","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link AV2HDMI is a composite RCA to HDMI upscaler that converts analogue CVBS video and stereo audio into digital HDMI output at either 720p or 1080p resolution. The converter accepts the three-RCA composite connection standard (yellow video, red\/white audio) from older equipment and outputs over a single HDMI cable to modern TVs, monitors and projectors.\u003c\/p\u003e\n\u003cp\u003eDesigned for connecting legacy devices to current displays, the converter suits retro gaming consoles, VCRs, older camcorders, DVD players and set-top boxes that predate HDMI. The resolution switch on the top panel selects between 720p@60Hz and 1080p@60Hz output, allowing the user to match the native resolution of the display or prioritise compatibility over upscaling quality depending on the source material.\u003c\/p\u003e\n\u003cp\u003eThe converter is powered via a mini-USB port on the side panel, drawing 5V DC from any standard USB power adapter, PC USB port, or TV USB service port. The 66 x 55 x 20mm footprint and 35g weight make the unit small enough to sit behind a TV or be cable-tied to the back of a monitor without additional mounting. The unit accepts PAL, NTSC, SECAM and their variants automatically, so no manual switching is needed when changing between region-locked source devices.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connections\u003c\/td\u003e\n\u003ctd\u003eRCA x 3 (CVBS, Audio L\/R)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connection\u003c\/td\u003e\n\u003ctd\u003eHDMI socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo input\u003c\/td\u003e\n\u003ctd\u003ePAL, NTSC3.58, NTSC4.43, SECAM, PAL\/M, PAL\/N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo output\u003c\/td\u003e\n\u003ctd\u003e1080p@60Hz, 720p@60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower : input\u003c\/td\u003e\n\u003ctd\u003eDC\/5V (mini USB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e66mm x 55mm x 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.04KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128511UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this converter work with SCART devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This converter accepts only composite RCA connections (yellow video, red\/white audio). If your device has SCART output, you will need a SCART-to-RCA adapter cable before connecting to this converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between 720p and 1080p output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e720p output is 1280 x 720 pixels; 1080p is 1920 x 1080 pixels. The converter upscales the analogue composite input (typically 576i or 480i) to whichever HD resolution you select. Most modern displays handle both, but some older HD-ready TVs may only support 720p reliably.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a USB power adapter included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA USB power cable (mini-USB) is included. You will need to supply your own USB power adapter, or you can power the converter from a USB port on your TV or a PC.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this improve the picture quality of VHS tapes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe converter upscales the resolution but cannot add detail that is not present in the source. VHS tapes will still show analogue artefacts (noise, tracking lines, colour bleed) but will be displayed at the correct aspect ratio and resolution on a modern HDMI screen.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313142522123,"sku":"128.511UK","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128511UK_0.jpg?v=1784889808"},{"product_id":"av-link-hdmi-to-composite-rca-av-converter-1080p-to-pal-ntsc","title":"AV:Link HDMI to Composite RCA AV Converter - 1080p to PAL\/NTSC","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link HDMI to Composite RCA converter takes a 1080p or 720p HDMI signal and scales it down to analogue composite video (CVBS) with stereo audio on three RCA phono outputs. The unit accepts HDMI input from laptops, media players, set-top boxes and game consoles, then converts the digital signal to analogue for connection to older CRT TVs, VHS recorders, composite-only projectors and legacy monitors that lack HDMI input.\u003c\/p\u003e\n\u003cp\u003eDesigned for home users connecting modern streaming devices to older equipment, AV installers maintaining legacy projector systems, and educational or corporate environments where older displays remain in service, the converter operates plug-and-play with no driver installation. Power is drawn from a USB port (cable included) or a standard USB mains adapter (not included). The unit sits between the HDMI source and the composite display, with the HDMI socket on one side and three colour-coded RCA phono sockets (yellow video, red\/white audio) on the opposite side.\u003c\/p\u003e\n\u003cp\u003eThe 66 x 55 x 20mm metal-cased unit weighs 38g and can be cable-tied behind equipment racks or placed on a desktop without movement. The converter supports PAL, NTSC 3.58, NTSC 4.43, SECAM, PAL\/M and PAL\/N output formats, selected via a switch on the side panel. Video input resolution is auto-detected, handling both 1080p@60Hz and 720p@60Hz HDMI sources. Output is always composite standard definition regardless of input resolution, as this is the maximum resolution composite video supports.\u003c\/p\u003e\n\u003cp\u003eHDMI sources with HDCP copy protection may not display if the content is restricted from analogue output. The converter passes unprotected signals without issue, making it suitable for personal media libraries, presentations and educational content rather than commercial streaming services with active HDCP enforcement.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connections\u003c\/td\u003e\n\u003ctd\u003eHDMI socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connections\u003c\/td\u003e\n\u003ctd\u003eRCA x 3 (CVBS, Audio L\/R)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo input\u003c\/td\u003e\n\u003ctd\u003e1080p@60Hz, 720p@60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo output\u003c\/td\u003e\n\u003ctd\u003ePAL, NTSC3.58, NTSC4.43, SECAM, PAL\/M, PAL\/N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower : input\u003c\/td\u003e\n\u003ctd\u003eDC\/5V (mini USB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e66mm x 55mm x 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.04KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128512UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this converter work with Netflix or streaming services?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHDMI sources with HDCP copy protection may not output through this converter if the content provider restricts analogue conversion. It works reliably with personal media libraries, presentations and unprotected video sources. Commercial streaming services often enforce HDCP, which can prevent signal passthrough.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power supply does it need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe converter is powered via a mini USB port rated at 5V DC. A USB cable is included in the box. You can power it from a laptop USB port, a TV's USB port, or a standard USB mains adapter (not included).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I select between PAL and NTSC?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA format switch on the side panel toggles between PAL, NTSC 3.58, NTSC 4.43, SECAM, PAL\/M and PAL\/N. For UK use, select PAL. For North American legacy displays, select NTSC 3.58.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat resolution is the composite output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eComposite video is standard definition only, typically 576i for PAL or 480i for NTSC. The converter scales the 1080p or 720p HDMI input down to match the composite format. You cannot achieve HD resolution through composite video.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313142587659,"sku":"128.512UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128512UK_0.jpg?v=1784889834"},{"product_id":"av-link-4k-hdmi-digital-audio-extractor-toslink-3-5mm-output","title":"AV:Link 4K HDMI Digital Audio Extractor - Toslink \u0026 3.5mm Output","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 4K HDMI Digital Audio Extractor splits an HDMI signal into separate video and audio outputs, sending the video onwards via HDMI while extracting the audio via either a Toslink optical port or a 3.5mm stereo jack. The device accepts one HDMI input supporting resolutions up to 3840 x 2160 at 30Hz (HDMI 1.4b, HDCP 1.4), passes that video signal through to its HDMI output port, and simultaneously routes the embedded audio to both the Toslink and 3.5mm outputs on the front panel.\u003c\/p\u003e\n\u003cp\u003eDesigned for situations where a display lacks usable audio outputs. Common with projectors, older monitors, and some televisions. The extractor sits inline between the source device (games console, Blu-ray player, streaming box, set-top box) and the display. The Toslink output connects to AV receivers, soundbars or active speakers with optical inputs, while the 3.5mm output handles wired headphones, powered desktop speakers, or analogue stereo amplifiers. Both outputs are live simultaneously, though most users will connect only one at a time.\u003c\/p\u003e\n\u003cp\u003eThe extractor measures 60 x 58 x 22mm and draws power via a micro-USB port on the side panel (cable included, USB mains adapter not included. Any standard 5V USB charger or spare USB port on a TV or console will power the unit). The black metal enclosure has no active cooling and runs silently. Audio formats supported include stereo PCM, DSD and HBR (high bit-rate audio passthrough for formats like Dolby TrueHD and DTS-HD Master Audio when output via Toslink to a compatible receiver).\u003c\/p\u003e\n\u003cp\u003eThe device is plug-and-play with no driver installation or configuration required. HDMI and audio sync is maintained without perceptible delay, making the extractor suitable for gaming where audio lag would disrupt gameplay. Weight is 102g.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connections\u003c\/td\u003e\n\u003ctd\u003eHDMI (4K)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connections\u003c\/td\u003e\n\u003ctd\u003eHDMI (4K), Optical (Toslink), 3.5mm (Stereo)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 x 2160 @ 30Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP version\u003c\/td\u003e\n\u003ctd\u003e1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio output\u003c\/td\u003e\n\u003ctd\u003eStereo, DSD and HD (HBR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower : input\u003c\/td\u003e\n\u003ctd\u003eDC\/5V (micro USB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e60mm x 58mm x 22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.10KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128514UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan both audio outputs be used at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth the Toslink and 3.5mm outputs are active simultaneously. You can connect both a soundbar via Toslink and headphones via 3.5mm if needed, though most setups use only one output at a time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it add audio delay for gaming?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The extractor maintains HDMI and audio sync without perceptible latency, making it suitable for gaming where audio lag would disrupt timing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat powers the unit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe extractor is powered via a micro-USB port on the side. A USB cable is included in the box. You can power it from any standard 5V USB charger, a spare USB port on your TV, games console, or a USB mains adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support 4K at 60Hz?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The maximum supported resolution is 3840 x 2160 at 30Hz (4K UHD at 30Hz). For 4K content at 60Hz you would need a different extractor supporting HDMI 2.0 or higher.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313142784267,"sku":"128.514UK","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128514UK_0.jpg?v=1784889856"},{"product_id":"av-link-fibre-optic-toslink-splitter-1-in-2-out","title":"AV:Link Fibre Optic Toslink Splitter 1 In 2 Out","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link fibre optic Toslink splitter takes one optical digital audio input and splits it to two optical outputs simultaneously, allowing a single source device to send audio to two separate receivers. The splitter uses standard Toslink (optical SPDIF) connections with gold-plated tips on all three ports. One input and two outputs.\u003c\/p\u003e\n\u003cp\u003eDesigned for home cinema and audio setups where one source needs to feed multiple destinations, the splitter handles common scenarios such as sending TV audio to both a soundbar and a wireless headphone transmitter, or routing a Blu-ray player's audio to an AV receiver and a separate recording device at the same time. The unit requires no external power and passes the digital audio signal through passively.\u003c\/p\u003e\n\u003cp\u003eThe compact housing measures 220mm long including the attached input cable, with the splitter body itself at 45mm wide and 15mm deep. At 26g the unit can be cable-tied behind a TV or tucked into an equipment rack without adding weight or bulk. The black matte finish blends into typical AV setups and the unit is CE and UKCA certified for UK sale.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connections\u003c\/td\u003e\n\u003ctd\u003eOptical (TOSlink)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connections\u003c\/td\u003e\n\u003ctd\u003eOptical (TOSlink) x2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e220mm x 45mm x 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the splitter need external power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The splitter is a passive device that splits the optical signal without requiring mains power or batteries. It draws no power and simply divides the incoming digital audio stream to both outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan both outputs be used at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The splitter sends the same digital audio signal to both outputs simultaneously, so you can connect two devices and both will receive the audio feed at the same time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat audio formats does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe splitter passes through standard optical SPDIF audio formats including stereo PCM, Dolby Digital, and DTS. It does not decode or convert audio. It simply splits the digital signal as received from the source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat devices can be connected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAny device with a Toslink optical output can be used as the source (TVs, Blu-ray players, games consoles, CD players, projectors). Any device with a Toslink optical input can be connected as a receiver (soundbars, AV receivers, headphone transmitters, digital recorders).\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313142882571,"sku":"128.516UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128516UK_0.jpg?v=1784889869"},{"product_id":"av-link-3-port-hdmi-switch-with-ir-remote-4k-support","title":"AV:Link 3-Port HDMI Switch with IR Remote - 4K Support","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 3-port HDMI switch routes three HDMI sources to a single display, with input selection controlled by either the included IR remote or a button on the switch itself. Three green LEDs on the front panel indicate which input is currently active, and the unit requires no external power supply. It draws power directly from the HDMI cables connected to it.\u003c\/p\u003e\n\u003cp\u003eDesigned for home cinema setups, gaming consoles and presentation environments where multiple HDMI sources need to share one screen, the switch supports HDMI 1.4a with up to 4K resolution at 60Hz, 1080p Full HD, 3D content and 8-bit deep colour. Audio pass-through includes DTS-HD, Dolby TrueHD, DTS, Dolby AC3 and DSD formats, making it suitable for multi-channel AV receivers and soundbars that decode lossless audio.\u003c\/p\u003e\n\u003cp\u003eThe compact 77 x 56 x 15mm metal chassis fits behind a wall-mounted TV or sits unobtrusively on an AV rack shelf, and the 40g weight allows it to be cable-tied to the back of a display without additional support. HDCP2.2 compliance ensures compatibility with protected content from streaming boxes, Blu-ray players and modern games consoles. The remote uses a CR2025 coin cell battery (supplied) and operates via line-of-sight IR.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo format\u003c\/td\u003e\n\u003ctd\u003eUp to 4K, 1080p @ 60Hz, 3D, 8bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD, Dolby-trueHD, DTS, Dolby-AC3 and DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-15 to +55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e340MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e3.4Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e150mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e77mm x 56mm x 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.04KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery : remote\u003c\/td\u003e\n\u003ctd\u003eCR2025 (supplied)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128820UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this switch need external power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The switch is bus-powered, drawing up to 150mA from the HDMI cables connected to it. This works reliably when connected to active HDMI sources like set-top boxes, games consoles and Blu-ray players. If your sources do not provide enough power over HDMI, the switch may not operate correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it switch automatically between inputs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Input selection is manual only, controlled by the IR remote or the button on the unit. The switch does not detect signal presence or auto-switch to an active input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum cable length supported?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHDMI cable performance varies by quality and construction. Most standard HDMI cables up to 5m work reliably with this switch at 1080p. For 4K content or longer runs, use certified Premium High Speed HDMI cables to avoid signal degradation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with HDMI 2.0 or 2.1 sources?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe switch is HDMI 1.4a, so it will pass 4K at 60Hz and supports HDCP2.2 for protected content. HDMI 2.0 and 2.1 features such as HDR10+, variable refresh rate and 4K at 120Hz are not supported. The signal will be downscaled to the maximum supported by HDMI 1.4a.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313143603467,"sku":"128.820UK","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128820UK_0.jpg?v=1784889887"},{"product_id":"av-link-1x2-hdmi-splitter-4k-bus-powered","title":"AV:Link 1x2 HDMI Splitter 4K - Bus Powered","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 128.825UK is a 1-input 2-output HDMI splitter that sends a single HDMI source to two displays simultaneously. The unit supports 4K resolution, 1080p at 60Hz, 3D content and up to 36-bit deep colour, with HDCP 2.2 compliance for protected content. It draws power directly from the HDMI signal (bus-powered), with an optional USB power cable included for installations where the HDMI source cannot supply sufficient current.\u003c\/p\u003e\n\u003cp\u003eDesigned for home theatre systems, digital signage, retail displays and AV installations where one source needs to feed multiple screens, the splitter handles both video and audio pass-through. Audio formats include DTS-HD, Dolby TrueHD, DTS\/Dolby AC3 and DSD HD (HBR), so it works with surround sound systems and stereo outputs without re-encoding. Two green LEDs on the front panel indicate active output status for each HDMI port.\u003c\/p\u003e\n\u003cp\u003eThe compact 62 x 51 x 11mm ABS housing can sit behind a TV, inside an AV rack or on a desk without taking up rack space. Maximum bandwidth of 340MHz and a 3.4Gbps baud rate allow the splitter to handle full 4K streams without signal degradation. The unit can also function as a signal booster when placed at the end of a long HDMI cable run, regenerating the signal before it reaches the display. Operating temperature range is -15 to +55°C, suitable for indoor commercial and residential environments.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo format\u003c\/td\u003e\n\u003ctd\u003e4K, Up to 1080p @ 60Hz, 3D, 36bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD, Dolby-trueHD, DTS\/Dolby-AC3, DSD HD(HBR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-15 to +55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e340MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e3.4Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e350mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e62mm x 51mm x 11mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128825UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this require external power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The splitter draws power from the HDMI signal itself (bus-powered). A USB power cable is included for installations where the HDMI source cannot supply enough current, but most modern sources (set-top boxes, Blu-ray players, game consoles) provide sufficient power without it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with 4K HDR content?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe splitter supports 4K resolution and is HDCP 2.2 compliant, which is required for protected 4K content. However, HDMI 1.4a does not natively support HDR metadata pass-through, so HDR content may display as standard dynamic range on the connected displays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo both outputs show the same image?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. This is a splitter, not a matrix switcher. Both HDMI outputs display identical content from the single input source at the same time. The outputs cannot show different content or be controlled independently.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it extend HDMI cable runs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The splitter regenerates the HDMI signal, so it can be placed at the end of a long cable run (up to the limits of passive HDMI cable length) to boost the signal before it reaches the display, effectively extending the maximum distance.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313143701771,"sku":"128.825UK","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128825UK_0.jpg?v=1784889907"},{"product_id":"av-link-3-port-hdmi-switch-full-hd-1080p","title":"AV:Link 3-Port HDMI Switch - Full HD 1080p","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 3-port HDMI switch routes three HDMI source devices to a single HDMI display through manual button selection on the switch body. Built to HDMI 1.3b specification, it handles video up to 1080p at 60Hz with 12-bit deep colour and passes stereo or multi-channel audio formats including Dolby TrueHD and DTS-HD Master Audio through the HDMI signal path.\u003c\/p\u003e\n\u003cp\u003eDesigned for home theatre racks, TV cabinets and desktop setups where multiple sources (games consoles, set-top boxes, media players) connect to one screen, the switch eliminates cable swapping at the display end. A button on the top face cycles through inputs 1, 2 and 3, with corresponding LED indicators showing the active source. The 45cm attached cable terminates in a male HDMI connector for the output run to the TV or monitor.\u003c\/p\u003e\n\u003cp\u003eThe compact 80mm x 90mm footprint allows the switch to sit behind a TV stand or inside a cabinet without taking meaningful space. Gold-plated HDMI connectors provide corrosion resistance and reduce signal degradation over repeated plug cycles. No external power supply is required. The switch draws operating power from the +5V line carried by the HDMI cables themselves, which works reliably when all connected devices are powered on.\u003c\/p\u003e\n\u003cp\u003eThe switch operates passively with no upscaling, re-timing or EDID management, meaning it works best when all connected sources output similar resolutions and the display has broad format compatibility. For complex multi-format setups or automatic switching based on source power state, an active HDMI matrix is a better fit, but for straightforward manual switching between three similar devices this passive switch provides a cost-effective and zero-latency solution.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo format\u003c\/td\u003e\n\u003ctd\u003eUp to 4K @ 30Hz, 12bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e2.5Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e45cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e80cm x 90cm x 15cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.08KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it switch automatically when a source is turned on?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a manual switch requiring the user to press the button on the switch body to cycle through inputs 1, 2 and 3. LED indicators show which input is currently active.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need an external power supply?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The switch draws operating power from the +5V line carried by the HDMI cables. All connected source devices and the display must be powered on for the switch to function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with 4K sources or displays?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe switch is rated to HDMI 1.3b specification with a maximum of 1080p at 60Hz. It will pass a 4K signal if the source and display negotiate a compatible handshake, but the switch itself does not guarantee 4K compatibility and may cause the source to default to 1080p output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat audio formats does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHDMI 1.3b supports stereo PCM, Dolby Digital, DTS, Dolby TrueHD and DTS-HD Master Audio passed through the HDMI signal. The switch does not extract or convert audio. It passes whatever the source outputs within the HDMI 1.3b bandwidth limit.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313143800075,"sku":"128.831UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128831UK_0.jpg?v=1784889939"},{"product_id":"av-link-4k-hdmi-2-0-repeater-60hz-at-10m","title":"AV:Link 4K HDMI 2.0 Repeater - 60Hz at 10m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 4K HDMI 2.0 repeater is a 50mm inline signal booster that extends HDMI connections beyond standard cable length limits without adding signal degradation. It supports 4K resolution at 60Hz over a combined 10m cable run (5m input + 5m output) or Full HD and 4K@30Hz over 40m (20m input + 20m output), allowing source devices to connect to displays at greater distances than a single HDMI cable can reliably achieve.\u003c\/p\u003e\n\u003cp\u003eDesigned for home cinema installations, commercial AV setups, digital signage and gaming rigs where the display sits more than 5m from the source, the repeater sits inline between two HDMI cables and draws power directly from the HDMI bus, eliminating the need for external power supplies or wall adapters. The unit passes HDCP 2.2 handshake data between source and display, maintaining compatibility with protected 4K streaming content from Netflix, Amazon Prime Video and UHD Blu-ray players.\u003c\/p\u003e\n\u003cp\u003eThe aluminium housing measures 50 x 30 x 18mm and weighs 21g, small enough to tuck behind a wall-mounted TV or inside an AV cabinet without adding visible bulk to the cable run. The repeater supports high-bitrate audio formats including Dolby TrueHD, DTS-HD Master Audio, Dolby AC3 and DSD, passing multi-channel soundtracks to AV receivers and soundbars without downmixing or compression. Maximum bandwidth of 600MHz and 18Gbps aggregate data rate (3 x 6Gbps lanes) ensures compatibility with HDR10, HDR10+ and Dolby Vision metadata where supported by the connected devices.\u003c\/p\u003e\n\u003cp\u003eThe unit operates on the HDMI 2.0b specification and is backward-compatible with HDMI 1.4 and earlier devices, automatically negotiating the highest common resolution and refresh rate between source and display. For maximum distance and signal integrity, pair the repeater with certified high-speed HDMI cables rated for 18Gbps. Lower-quality cables may limit effective distance or introduce handshake failures at 4K@60Hz.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 x 2160P @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD, Dolby True, DTS, Dolby-AC3 and DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP version\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e600MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e3x 6Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e300mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission distance\u003c\/td\u003e\n\u003ctd\u003e10m 4K@60Hz (5m input\/5m output), 40m 4K@30Hz and 1080p (20m input\/20m output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e50mm x 30mm x 18mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.02KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128832UK.pdf?v=1784889962\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this repeater need external power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The repeater draws up to 300mA directly from the HDMI bus, so no external power supply or USB cable is required. It operates purely from the power carried within the HDMI connection itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum distance for 4K at 60Hz?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe repeater supports 4K@60Hz over a combined 10m cable run. Typically 5m from source to repeater and 5m from repeater to display. For longer runs up to 40m combined, resolution drops to 4K@30Hz or Full HD@60Hz depending on the source device output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it\u003c\/strong\u003e\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313143865611,"sku":"128.832UK","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128832UK_0.jpg?v=1784889951"},{"product_id":"av-link-2x4-hdmi-matrix-switch-splitter-4k-60hz-ir-remote","title":"AV:Link 2x4 HDMI Matrix Switch Splitter 4K@60Hz - IR Remote","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 2x4 HDMI matrix switch splitter routes two HDMI source devices to four display outputs simultaneously, with user-selectable source switching via IR remote. The unit supports HDMI 2.0a with resolutions up to 3840 x 2160 at 60Hz, 600MHz bandwidth, and 6Gbps data rate, handling 4K content from modern set-top boxes, media players, gaming consoles and presentation sources.\u003c\/p\u003e\n\u003cp\u003eDesigned for hospitality venues, sports bars, retail displays, conference rooms and multi-screen entertainment setups, the matrix switch allows a single source to be distributed to all four outputs, or allows quick switching between two sources across all displays. Gold-plated HDMI connectors minimise signal degradation. The unit supports cable runs up to 20m combined input\/output at 1080p or 10m combined at 4K without requiring signal boosters or repeaters.\u003c\/p\u003e\n\u003cp\u003eAudio extraction is provided via digital SPDIF (optical) and analogue 3.5mm jack outputs, allowing the audio signal from the selected HDMI source to be routed to a separate sound system or PA while video continues to the displays. The unit supports DTS-HD, Dolby TrueHD, DTS, Dolby AC3 and DSD audio formats, and handles 8-bit, 10-bit and 12-bit deep colour signals. The compact 200 x 70 x 25mm black metal housing sits on a desk or rack shelf, powered by the included UK mains adaptor (500mA max draw). The IR remote uses a CR2025 battery (supplied) and provides line-of-sight source switching without needing to access the unit directly.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 x 2160 @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay colours\u003c\/td\u003e\n\u003ctd\u003e8\/10\/12bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP version\u003c\/td\u003e\n\u003ctd\u003e1.4 (input only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD, Dolby True, DTS, Dolby-AC3 and DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e600MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e6Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission distance\u003c\/td\u003e\n\u003ctd\u003e20m max HD or 10m max 4K (20m input\/output @ 1080p and 10m input\/output @ 4K)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e500mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-15°C ~ +55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery : remote\u003c\/td\u003e\n\u003ctd\u003eCR2025 (supplied)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e200mm x 70mm x 25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.30KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128835UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between a switch and a splitter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis unit combines both functions. It switches between two HDMI input sources and splits the selected source to four output displays simultaneously. All four outputs show the same source at any given time. You cannot send different sources to different outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable length is supported at 4K resolution?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unit supports a combined 10m cable run (input plus output) at 4K resolutions up to 3840 x 2160 at 60Hz. For example, a 5m input cable and a 5m output cable, or a 3m input and 7m output. At 1080p HD the combined run can be up to 20m per output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support HDCP copy protection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The unit supports HDCP 1.4 on the input side, allowing it to pass protected content from Blu-ray players, streaming devices and set-top boxes to displays. Both source and displays must be HDCP-compliant for protected content to display.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's in the box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe package includes the 2x4 matrix switch unit, IR remote control with CR2025 battery fitted, UK mains power adaptor, and product manual. HDMI cables are not included and must be purchased separately.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313143963915,"sku":"128.835UK","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128835UK_0.jpg?v=1784889979"},{"product_id":"av-link-4k-hdmi-extender-over-ethernet-kit-100m","title":"AV:Link 4K HDMI Extender Over Ethernet Kit - 100m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 4K HDMI extender kit transmits HDMI signals up to 100m over a single Cat5e or Cat6 Ethernet cable, replacing bulky HDMI cable runs with standard network cabling. The kit consists of a transmitter unit (TX) and a receiver unit (RX), each measuring 82x45x18mm, with the transmitter connecting to the HDMI source and the receiver connecting to the display or projector. Video resolution supports up to 3840x2160 at 30Hz (4K UHD) using HDMI 1.4a protocol, with HDCP 2.2 compliance for protected content.\u003c\/p\u003e\n\u003cp\u003eDesigned for home cinema, digital signage and commercial AV installations where the source and display are separated by long cable runs, the extender eliminates the signal degradation and cost of 100m HDMI cable. The IR-TX and R\/L ports on the units allow bi-directional infrared control, so a remote control at the display end can operate the source device at the transmitter end without line-of-sight. The 3.5mm stereo output on the receiver extracts audio from the HDMI signal for connection to headphones, powered speakers or an external amplifier, independent of the HDMI output to the display.\u003c\/p\u003e\n\u003cp\u003eBoth units feature ventilation slots on the top surface to dissipate heat during operation, and each is powered by a dedicated 5Vdc 1A power supply (included). The gold-plated HDMI connectors reduce contact oxidation over time, and the units ship with rack-mounting brackets for installation in AV racks or under-desk mounting. The extender supports DTS-HD, Dolby TrueHD, DTS, Dolby AC3 and DSD audio formats, with a maximum bandwidth of 340MHz and baud rate of 3x3.4Gbps. Cat5e or Cat6 shielded twisted pair (STP\/FTP) cable is required for the link and is not supplied with the kit.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI version\u003c\/td\u003e\n\u003ctd\u003e1.4a\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. range\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo format\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 x 2160 @ 30Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eSupports DTS-HD\/Dolby-trueHD\/DTS\/Dolby-AC3\/DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. cable length\u003c\/td\u003e\n\u003ctd\u003eHDMI (input \u0026amp; output) ≤15m AWG26 standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e340MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e3x3.4Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e350mA (TX) and 200mA (RX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e5Vdc, 1000mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e82mm x 45mm x 18mm (each unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.12KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128839UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable type is required for the 100m connection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe extender requires Cat5e or Cat6 shielded twisted pair (STP or FTP) cable between the transmitter and receiver units. Unshielded cable (UTP) is not recommended as it may cause signal interference over long runs. The cable is not included with the kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the IR remote control work in both directions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IR-TX and R\/L ports support bi-directional infrared control, allowing a remote at the display end to control the source device at the transmitter end, or vice versa. IR emitter and receiver cables are required and may be sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I extract audio while still sending HDMI to the display?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 3.5mm stereo output on the receiver unit extracts audio from the HDMI signal simultaneously with the HDMI output to the display. This allows connection to headphones, powered speakers or an external amplifier without interrupting the video signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum resolution supported?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe extender supports resolutions up to 3840x2160 (4K UHD) at 30Hz using HDMI 1.4a. It is HDCP 2.2 compliant for protected content. Higher refresh rates such as 4K at 60Hz are not supported by this model.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313144127755,"sku":"128.839UK","price":58.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128839UK_0.jpg?v=1784890009"},{"product_id":"av-link-hdmi-2-0-4k-splitter-1-input-2-outputs","title":"AV:Link HDMI 2.0 4K Splitter 1 Input 2 Outputs","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link HDMI 2.0 splitter takes one HDMI input and duplicates it to two HDMI outputs simultaneously, maintaining 4K resolution at 3840 x 2160 60Hz on both displays. The unit supports HDMI 2.0b, HDCP 2.2 copy protection, 18Gbps bandwidth, and passes through multi-channel audio formats including DTS-HD, Dolby TrueHD, DTS, Dolby AC3 and DSD without downmixing.\u003c\/p\u003e\n\u003cp\u003eDesigned for home cinema setups where a single source feeds two TVs in different rooms, digital signage installations requiring identical content on twin screens, and gaming setups where console output needs to reach both a recording display and a viewing display, the splitter requires no switching or configuration once connected. Plug in the source to the input port, connect both displays to the output ports, and apply power via the included UK DC 5V adaptor. The metal housing dissipates heat efficiently and the compact 128 x 53 x 23.5mm footprint fits behind wall-mounted displays or inside AV cabinets.\u003c\/p\u003e\n\u003cp\u003eThe gold-plated HDMI connectors reduce signal degradation over repeated plugging cycles and the unit handles 8-bit, 10-bit and 12-bit deep colour for HDR content pass-through where both the source and displays support it. Maximum transmission distance is 10m at 4K 60Hz or 35m at 4K 30Hz and Full HD, measured from source to splitter to display using standard HDMI cables. Operating temperature range is -15°C to +55°C, allowing use in unheated commercial environments.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.14KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e128mm x 53mm x 23.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eInput: AC (50Hz, 60Hz) 100-240V, Output: DC5V\/1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e450mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e18Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connections\u003c\/td\u003e\n\u003ctd\u003e2x HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 x 2160 @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay colours\u003c\/td\u003e\n\u003ctd\u003e8\/10\/12bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD, Dolby True, DTS, Dolby-AC3 and DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP version\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e600MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission distance\u003c\/td\u003e\n\u003ctd\u003e35m max 4K @ 30Hz and FHD or 10m max 4K @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-15°C to +55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128845UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan both displays show different content?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The splitter duplicates the same signal to both outputs simultaneously. Both displays show identical content at the same resolution and refresh rate. For independent content on each display, you need an HDMI matrix switcher rather than a splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with 4K at 60Hz on both outputs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided the HDMI cable run from splitter to each display is 10m or less. Longer cable runs may require reducing to 4K 30Hz or Full HD 60Hz depending on cable quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support HDR content?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unit supports 8-bit, 10-bit and 12-bit deep colour pass-through, which is required for HDR10 content. Both the source device and both displays must also support HDR for the full chain to work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's in the box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe splitter unit, a UK DC 5V 1A power adaptor, and a product manual. HDMI cables are sold separately.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313144619275,"sku":"128.845UK","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128845UK_0.jpg?v=1784890028"},{"product_id":"av-link-hdmi-2-0-4k-splitter-1-in-4-out-3840x2160-60hz","title":"AV:Link HDMI 2.0 4K Splitter 1 In 4 Out - 3840x2160 @ 60Hz","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link HDMI 2.0 splitter distributes one HDMI source to four displays simultaneously, supporting resolutions up to 3840 x 2160 @ 60Hz with HDCP 2.2 copy protection. The unit accepts a single HDMI input and replicates the signal across four HDMI outputs, allowing identical content to be shown on multiple screens without quality degradation.\u003c\/p\u003e\n\u003cp\u003eDesigned for retail digital signage, hospitality installations, home cinema multi-room setups and conference room AV, the splitter handles 4K UHD content from set-top boxes, media players, gaming consoles and laptops. The metal chassis measures 178 x 67 x 23mm and weighs 230g, making it compact enough to fit behind displays or in AV racks. Gold-plated HDMI connectors on all five ports (one input, four outputs) reduce contact resistance and maintain signal integrity across the 600MHz bandwidth.\u003c\/p\u003e\n\u003cp\u003eAudio passthrough includes DTS-HD, Dolby TrueHD, DTS, Dolby-AC3 and DSD formats, preserving multi-channel audio from Blu-ray players and streaming devices. The splitter supports 8-bit, 10-bit and 12-bit deep colour, allowing HDR content to pass through to compatible displays. Maximum transmission distance varies by resolution: 35m for 4K @ 30Hz and Full HD content, or 10m for 4K @ 60Hz over standard HDMI cables. The unit operates on 100-240V AC mains via the included UK power adaptor (DC 5V\/1A output, 650mA max current draw).\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.23KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e178mm x 67mm x 23mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eInput: AC (50Hz, 60Hz) 100-240V, Output: DC5V\/1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e650mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e6Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connections\u003c\/td\u003e\n\u003ctd\u003e4x HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 x 2160 @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay colours\u003c\/td\u003e\n\u003ctd\u003e8\/10\/12bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD, Dolby True, DTS, Dolby-AC3 and DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP version\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e600MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission distance\u003c\/td\u003e\n\u003ctd\u003e35m max 4K @ 30Hz and FHD or 10m max 4K @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-15°C to +55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128846UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this support 4K @ 60Hz on all four outputs simultaneously?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The splitter supports 3840 x 2160 @ 60Hz across all four outputs at the same time, provided the source device and all connected displays are 4K-capable and the HDMI cables used are rated for 18Gbps bandwidth (HDMI 2.0 standard).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum cable length between the splitter and displays?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor 4K @ 60Hz content, use HDMI cables no longer than 10m between the splitter and each display. For 4K @ 30Hz or Full HD (1080p) content, cables up to 35m can be used without significant signal degradation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs HDCP 2.2 required for the source and displays?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The splitter is HDCP 2.2 compliant, which means both the source device (Blu-ray player, streaming box, console) and all connected displays must support HDCP 2.2 to view protected 4K content such as Ultra HD Blu-ray discs or 4K streaming services.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I power this from a USB port instead of mains?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The splitter requires DC 5V\/1A and draws up to 650mA under full load, which exceeds the current capacity of standard USB 2.0 ports (500mA max). Use the included UK mains adaptor or a regulated DC 5V\/1A+ power supply with a compatible connector.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313144717579,"sku":"128.846UK","price":29.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128846UK_0.jpg?v=1784890047"},{"product_id":"av-link-hdmi-2-0-1x8-splitter-4k-60hz-distribution","title":"AV:Link HDMI 2.0 1x8 Splitter - 4K 60Hz Distribution","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link HDMI 2.0 1x8 splitter takes a single HDMI source and distributes the signal to eight separate displays simultaneously, maintaining resolution up to 4K Ultra HD at 3840 x 2160 @ 60Hz. The unit supports HDCP 2.2 copy protection, 8\/10\/12-bit deep colour, and a maximum bandwidth of 600MHz across all eight outputs. Gold-plated HDMI connectors reduce signal degradation, and the metal chassis provides passive heat dissipation during continuous operation.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial and residential installations where one source needs to feed multiple screens. Retail video walls, sports bars, digital signage networks, exhibition stands, or multi-room home cinema. The splitter handles modern 4K sources including set-top boxes, Blu-ray players, media servers and games consoles. Each of the eight outputs delivers an identical feed, so all connected displays show the same content at the same time. The unit passes through multi-channel audio formats including DTS-HD, Dolby TrueHD, DTS, Dolby AC3 and DSD, preserving surround sound to compatible receivers.\u003c\/p\u003e\n\u003cp\u003eThe 276 x 136 x 24mm metal housing is designed for rack mounting or surface installation in AV racks, behind reception desks, or in equipment cupboards. At 660g the unit has sufficient weight to sit securely on a shelf without additional fixing. Maximum transmission distance is 10m per cable run at 4K 60Hz, or up to 35m at 4K 30Hz or Full HD, depending on cable quality. The included UK mains adaptor provides DC 5V at 2A with a maximum working current of 1600mA, and the operating temperature range of -15°C to +55°C suits both climate-controlled and unheated commercial environments.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.66KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e276mm x 136mm x 24mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eInput: AC (50Hz, 60Hz) 100-240V, Output: DC5V\/2A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e1600mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e6Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connections\u003c\/td\u003e\n\u003ctd\u003e8x HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 x 2160 @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay colours\u003c\/td\u003e\n\u003ctd\u003e8\/10\/12bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD, Dolby True, DTS, Dolby-AC3 and DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP version\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e600MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission distance\u003c\/td\u003e\n\u003ctd\u003e35m max 4K @ 30Hz and FHD or 10m max 4K @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-15°C to +55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128847UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum cable length per output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 4K 60Hz the maximum recommended cable run is 10m per output. At 4K 30Hz or Full HD 1080p the maximum extends to 35m. These figures assume good-quality HDMI cables with adequate shielding. Lower-quality cables may reduce the effective distance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo all eight outputs need to be connected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The splitter works with any number of outputs connected from one to eight. Unused outputs can be left unconnected without affecting the signal quality to the active displays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it pass audio to all displays?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The splitter passes multi-channel audio formats including DTS-HD, Dolby TrueHD, DTS, Dolby AC3 and DSD to all connected displays. Each display receives the same audio stream embedded in the HDMI signal. For separate audio extraction you would need an additional HDMI audio de-embedder on the source side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the splitter HDCP 2.2 compliant?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The unit supports HDCP 2.2, which is required for 4K content from Netflix, Amazon Prime Video, UHD Blu-ray players and similar protected sources. All connected displays must also support HDCP 2.2 for protected 4K content to display correctly.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313144783115,"sku":"128.847UK","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128847UK_0.jpg?v=1784890064"},{"product_id":"av-link-4k-hdmi-2-0-matrix-4-x-2","title":"AV:Link 4K HDMI 2.0 Matrix 4 x 2","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 4x2 HDMI 2.0 matrix switch routes any of four HDMI source devices to either of two display outputs, supporting resolutions up to 3840 × 2160 @ 60Hz with HDCP 2.2 copy protection. The unit handles HDMI v2.0b signal bandwidth at 600MHz and 18Gbps combined data rate, passing 8-bit, 10-bit and 12-bit deep colour video alongside DTS-HD, Dolby TrueHD, Dolby-AC3 and DSD audio formats.\u003c\/p\u003e\n\u003cp\u003eDesigned for AV installations in hospitality, retail showrooms, conference rooms and home cinema setups where multiple sources need to be distributed across two displays without re-cabling. The matrix can display different sources on each output simultaneously, or send the same source to both outputs. Control switching via the included IR remote or front-panel buttons. Maximum cable runs are 30m per input\/output at 4K@30Hz and Full HD, or 10m per input\/output at 4K@60Hz using quality HDMI cables.\u003c\/p\u003e\n\u003cp\u003eGold-plated HDMI connectors reduce signal degradation on long cable runs. Smart EDID management reads display capabilities and optimises the output signal for each connected screen. Two SPDIF optical outputs and two 3.5mm stereo outputs allow simultaneous audio breakout to an external sound system, powered speakers or headphones without interrupting the HDMI audio path. The metal enclosure measures 99 × 70 × 27mm and draws 600mA maximum from the supplied 5V DC adaptor.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. resolution\u003c\/td\u003e\n\u003ctd\u003e3840 x 2160 @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay colours\u003c\/td\u003e\n\u003ctd\u003e8\/10\/12bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP version\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD, Dolby True, DTS, Dolby-AC3 and DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connections\u003c\/td\u003e\n\u003ctd\u003e4x HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connections\u003c\/td\u003e\n\u003ctd\u003e2x HDMI, 2x Optical (Toslink), 2x 3.5mm Stereo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e600MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e3 x 6Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission distance\u003c\/td\u003e\n\u003ctd\u003e30m max 4K @ 30Hz and FHD or 10m max 4K @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e600mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-15°C to +55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery : remote\u003c\/td\u003e\n\u003ctd\u003e2x AAA (not supplied)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower adaptor\u003c\/td\u003e\n\u003ctd\u003eInput: AC (50Hz, 60Hz) 100-240V, Output: DC5V\/1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e99mm x 70mm x 27mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.30KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128849UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan I display different sources on each output at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The matrix allows independent source selection for each of the two outputs, so you can display HDMI input 1 on output 1 and HDMI input 3 on output 2 simultaneously, or send the same source to both outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable length can I use at 4K@60Hz?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe matrix supports up to 10m HDMI cable per input and per output when running 4K@60Hz signals. Longer runs up to 30m are supported at 4K@30Hz or Full HD resolutions. Use high-quality certified HDMI cables for best results at maximum distances.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it pass audio through HDMI or only via the breakout outputs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAudio passes through the HDMI outputs to the connected displays as normal. The SPDIF optical and 3.5mm stereo outputs provide simultaneous audio breakout, allowing you to send audio to external speakers or a sound system without affecting the HDMI audio path.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's in the box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unit ships with an IR remote control (batteries not included, requires 2x AAA), a UK mains power adaptor, and the product manual. HDMI cables are not included.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313144848651,"sku":"128.849UK","price":60.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128849UK_0.jpg?v=1784890085"},{"product_id":"av-link-4k-hdmi-2-0-matrix-4x4-switch-with-audio-extraction","title":"AV:Link 4K HDMI 2.0 Matrix 4x4 Switch with Audio Extraction","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 4x4 HDMI 2.0 matrix switch routes any of four HDMI sources to any of four HDMI displays, with independent source selection per output. The unit supports HDMI 2.0b signals up to 4K@60Hz (3840×2160) with HDCP 2.2 protection and an 18Gbps data rate, making it compatible with 4K streaming devices, Blu-ray players, gaming consoles and satellite receivers. Audio can be extracted from HDMI output 1 via an optical SPDIF port and a 3.5mm stereo jack, allowing simultaneous output to a soundbar or amplifier alongside the video display.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial installations in hospitality, sports bars, retail showrooms and conference facilities, the matrix allows independent control of each output via front panel buttons, IR remote, or RS232 serial connection. The RS232 port enables integration with larger AV control systems from a connected PC or control processor. EDID management switches on the front panel allow specific video resolution and audio format settings to be locked per input, preventing handshake issues with displays that support different capabilities.\u003c\/p\u003e\n\u003cp\u003eThe metal chassis measures 276×143×26mm and weighs 720g, suitable for rack mounting or placement on an equipment shelf. Gold-plated HDMI connectors reduce signal degradation over cable runs up to 30m combined length (input + output) at 4K@30Hz and Full HD resolutions, or 10m combined at 4K@60Hz. The unit supports multi-channel audio formats including DTS-HD, Dolby TrueHD, LPCM 7.1, DTS, Dolby AC3 and DSD. A 12V DC power supply with UK plug and an IR remote are included.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. resolution\u003c\/td\u003e\n\u003ctd\u003e3840 x 2160 @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay colours\u003c\/td\u003e\n\u003ctd\u003e8\/10\/12bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP version\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD\/Dolby-trueHD\/LPCM7.1\/DTS\/Dolby-AC3\/DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connections\u003c\/td\u003e\n\u003ctd\u003e4x HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connections\u003c\/td\u003e\n\u003ctd\u003e4x HDMI, Optical (Toslink), 3.5mm Stereo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e18Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission distance\u003c\/td\u003e\n\u003ctd\u003e30m max 4K @ 30Hz and FHD or 10m max 4K @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e800mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-15°C to +55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery : remote\u003c\/td\u003e\n\u003ctd\u003e2x AAA (not supplied)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower adaptor\u003c\/td\u003e\n\u003ctd\u003eInput: AC (50Hz, 60Hz) 100-240V, Output: DC12V\/1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e276mm x 143mm x 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.72KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128850UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan each display show a different source at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 4x4 matrix allows independent source selection for each of the four outputs. Output 1 can show HDMI input 3 while output 2 shows input 1, and so on. Each output is controlled separately via the front panel, IR remote or RS232 commands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable length is supported at 4K@60Hz?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor 4K@60Hz signals the combined input and output cable length should not exceed 10m per channel. For 4K@30Hz and Full HD (1080p) the combined length can extend to 30m. Use certified high-speed HDMI cables rated for 18Gbps to maintain signal integrity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the audio extraction work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe optical SPDIF and 3.5mm stereo jack outputs carry the audio signal from HDMI output 1 only. This allows the audio from the first display to be sent simultaneously to a soundbar, amplifier or headphones while the video displays on the connected screen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is EDID management used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEDID switches on the front panel allow you to lock specific resolution and audio format settings per input. This prevents handshake problems when displays connected to the outputs support different capabilities, ensuring each source outputs a consistent signal type compatible with all connected screens.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313145078027,"sku":"128.850UK","price":118.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128850UK_0.jpg?v=1784890110"},{"product_id":"mercury-amd02-2-way-vhf-uhf-distribution-amplifier-with-dc-pass","title":"Mercury AMD02 2-Way VHF\/UHF Distribution Amplifier with DC Pass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury AMD02 is a 2-way VHF\/UHF distribution amplifier that splits a single aerial input to two outputs plus one full-gain output, delivering 20dB full gain and 12dB per split output. Separate VHF (47-230MHz) and UHF (470-694MHz) inputs allow the unit to handle terrestrial TV and radio signals from dedicated aerials or a combined feed, while an integrated LTE filter blocks mobile network interference in the 694MHz+ range that can disrupt Freeview reception.\u003c\/p\u003e\n\u003cp\u003eDesigned for smaller domestic installations where an aerial signal needs splitting to two or three rooms, the AMD02 fits in loft spaces, behind wall-mounted TVs or on shelving near the entry point of the aerial cable. The DC pass function allows satellite control signals to pass through the unit when paired with a Magic Eye extender or similar device, so Sky boxes or Freeview boxes with IR extenders can still send remote control commands back through the same coaxial cable. The side-mounted F-type coaxial terminals accept standard coaxial connectors and the unit includes two F-type adaptors.\u003c\/p\u003e\n\u003cp\u003eThe fully screened metal housing reduces signal leakage and external interference pickup, while surge and short-circuit protection prevent damage from transient voltage spikes or wiring faults during installation. The 1m mains cable connects to any standard UK 230V socket and the compact 135 x 70 x 45mm footprint allows the amplifier to be mounted in tight spaces. Maximum output level of 94dBuV and noise below 3.8dB ensure stable signal delivery to connected equipment without visible degradation on Freeview HD channels.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : VHF\u003c\/td\u003e\n\u003ctd\u003e47 - 230MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : UHF\u003c\/td\u003e\n\u003ctd\u003e470-694MHz(5G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull gain output\u003c\/td\u003e\n\u003ctd\u003e20dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e22dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;3.8dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e2 x coax sockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e230Vac, 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e1.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130030UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the split outputs and the full-gain output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe two split outputs (TV1 and TV2) each deliver 12dB gain, while the full-gain output delivers the full 20dB. The full-gain output is typically used for the longest cable run or the room requiring the strongest signal, while the split outputs handle shorter runs to secondary TVs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the LTE filter affect normal Freeview channels?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The integrated LTE filter blocks mobile network frequencies above 694MHz, which fall outside the Freeview UHF band (470-694MHz). All standard Freeview and Freeview HD channels pass through unaffected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this with satellite signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The AMD02 is designed for VHF\/UHF terrestrial aerial signals only. Satellite signals operate at much higher frequencies (950-2150MHz) and require a dedicated satellite distribution amplifier or splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does DC pass allow?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDC pass allows control signals (typically 9V or 12V DC) to pass through the amplifier in reverse, enabling devices like Sky Magic Eye extenders or remote control IR extenders to send commands back to a set-top box via the same coaxial cable that carries the TV signal.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313154547979,"sku":"130.030UK","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130030UK_0.jpg?v=1784890126"},{"product_id":"mercury-amd04-4-way-vhf-uhf-distribution-amplifier-with-dc-pass","title":"Mercury AMD04 4-Way VHF\/UHF Distribution Amplifier with DC Pass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury AMD04 is a 4-way VHF\/UHF distribution amplifier with separate inputs for VHF (47-230MHz) and UHF (470-694MHz) signals, an integrated LTE filter to block 5G\/4G mobile interference, and DC pass capability for satellite control via Magic Eye systems. The unit provides four split outputs at 8dB gain each, plus one full gain output at 20dB, allowing simultaneous distribution to four TVs or radio receivers with a fifth full-strength feed for further distribution or signal analysis.\u003c\/p\u003e\n\u003cp\u003eDesigned for multi-room residential installations, holiday lets, care homes and small commercial premises requiring stable terrestrial TV and radio distribution, the AMD04 amplifies incoming aerial signals and splits them without the degradation that passive splitters introduce. The wideband low-noise amplifier maintains consistent signal quality across all outputs, while 22dB isolation between outputs prevents one receiver from affecting another. The LTE filter cuts mobile phone mast interference that can disrupt digital TV reception in areas with strong 4G\/5G coverage.\u003c\/p\u003e\n\u003cp\u003eThe black metal enclosure measures 180 x 70 x 45mm and mounts via side terminals for wall or cabinet installation. All connections are coaxial sockets with F-type adaptors supplied for standard coax plugs. The DC pass allows satellite dish LNB power and control signals to pass through the amplifier when using combined terrestrial and satellite setups. Surge protection and short-circuit limiting prevent damage from lightning strikes or wiring faults. The unit runs on 230V AC mains via a 1m attached power lead.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : VHF\u003c\/td\u003e\n\u003ctd\u003e47 - 230MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : UHF\u003c\/td\u003e\n\u003ctd\u003e470-694MHz(5G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull gain output\u003c\/td\u003e\n\u003ctd\u003e20dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e22dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;3.8dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e2 x coax sockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e230Vac, 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e1.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130031UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the LTE filter do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integrated LTE filter blocks 4G and 5G mobile phone signals that can interfere with digital TV reception. In areas with strong mobile mast coverage, these signals can cause picture freezing or complete loss of certain TV channels. The filter removes this interference before amplification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this with a satellite dish and aerial together?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The DC pass allows LNB power and control signals from a satellite receiver to pass through the amplifier to the dish via the aerial cable. This is useful in combined terrestrial\/satellite setups where Magic Eye remote extenders are used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the split outputs and the full gain output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe four split outputs each provide 8dB gain and are intended for connecting TVs or radios directly. The fifth full gain output provides 20dB and can be used for a further amplifier or splitter in larger installations, or for a primary TV that needs maximum signal strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the unit installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AMD04 mounts via side terminals on the enclosure, allowing it to be screwed to a wall, inside a cabinet, or onto a board in a plant room. All connections are coaxial sockets. VHF and UHF inputs on one side, five outputs on the other. F-type adaptors are supplied for standard coax plugs. The 1m power lead connects to a standard 230V mains socket.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313154580747,"sku":"130.031UK","price":28.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130031UK_0.jpg?v=1784890137"},{"product_id":"mercury-amd06-6-way-vhf-uhf-distribution-amplifier-with-dc-pass","title":"Mercury AMD06 6-Way VHF\/UHF Distribution Amplifier with DC Pass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury AMD06 is a 6-way VHF\/UHF distribution amplifier designed to split a single aerial signal across six output points plus one full-gain output, maintaining signal strength and picture quality across multiple TV or radio receivers. The unit accepts separate VHF (47-230MHz) and UHF (470-694MHz) inputs and provides 20dB full gain output, compensating for the signal loss that occurs when splitting coaxial cable across multiple rooms or devices.\u003c\/p\u003e\n\u003cp\u003eBuilt for domestic and light commercial installation. Multi-room homes, care facilities, small hotels, student accommodation. The AMD06 reduces snow, pixelation and intermittent signal drop-out on secondary TV points fed from a shared rooftop aerial. The integrated 5G\/4G LTE filter blocks mobile network interference in the 694MHz+ band, preventing picture breakup caused by nearby phone masts. DC pass functionality allows Magic Eye remote satellite control signals to travel back through the amplifier to a Sky or Freesat box located elsewhere in the property.\u003c\/p\u003e\n\u003cp\u003eThe metal housing is fully screened to prevent RF leakage and external interference, and side-mounted terminals allow coaxial cables to be routed cleanly without crossing in front of the unit when wall-mounted. Surge and short-circuit protection prevents amplifier damage from lightning strikes on the aerial or accidental wiring faults. The amplifier ships with four F-type adaptors for converting between coaxial plug and socket terminations depending on the existing cabling. At 225 x 70 x 45mm and 420g, the unit mounts in a loft, understairs cupboard or communications cabinet using the integral keyhole slots on the rear panel.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : VHF\u003c\/td\u003e\n\u003ctd\u003e47 - 230MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : UHF\u003c\/td\u003e\n\u003ctd\u003e470-694MHz(5G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull gain output\u003c\/td\u003e\n\u003ctd\u003e20dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e22dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;3.8dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e2 x coax sockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e230Vac, 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e1.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130032UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the full gain output and the six split outputs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe full gain output provides the entire 20dB amplified signal without splitting loss, typically used for the primary TV or for feeding a secondary amplifier. The six split outputs each receive 8dB gain after the signal has been divided, which is still sufficient for most domestic TV points on cable runs up to 20-30 metres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with both Freeview and satellite?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AMD06 amplifies terrestrial VHF and UHF signals from a rooftop aerial. This covers Freeview TV and DAB\/FM radio. It does not amplify satellite signals. The DC pass function allows Magic Eye or similar remote control signals to pass back through the amplifier to a satellite receiver located elsewhere, but the satellite signal itself must be distributed separately using a satellite-grade splitter or multiswitch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the LTE filter useful?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe built-in 5G\/4G LTE filter blocks mobile network frequencies above 694MHz. In areas close to phone masts, mobile signals can bleed into the UHF TV band and cause picture breakup, pixelation or complete loss of certain Freeview channels. The filter prevents this interference without affecting the wanted TV signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The AMD06 is designed for indoor installation in a dry location such as a loft, understairs cupboard or communications cabinet. The unit requires mains power via the supplied 1m cable and is not weatherproof.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313154613515,"sku":"130.032UK","price":31.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130032UK_0.jpg?v=1784890148"},{"product_id":"mercury-amd08-8-way-vhf-uhf-distribution-amplifier-with-dc-pass","title":"Mercury AMD08 8-Way VHF\/UHF Distribution Amplifier with DC Pass","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury AMD08 is an 8-way VHF\/UHF distribution amplifier with separate VHF and UHF inputs, delivering 20dB gain on the full output and 8dB gain per split across eight individual outputs. The unit accepts VHF signals from 47-230MHz and UHF signals from 470-694MHz, with an integrated 5G\/4G LTE filter blocking mobile signal interference before amplification. A DC pass function allows satellite control signals to pass through for Magic Eye remote extenders.\u003c\/p\u003e\n\u003cp\u003eDesigned for multi-room TV and radio distribution in residential and light commercial installations, the AMD08 takes a single aerial signal and distributes it to up to nine outputs (eight individual plus one full-gain output for cascading to additional distribution equipment). The side-mounted terminals simplify cable management in cabinet or wall-mounted installations, while the coaxial socket connections accept standard F-type connectors (four F-type adaptors included).\u003c\/p\u003e\n\u003cp\u003eThe fully screened metal housing blocks external interference and works with Digital Terrestrial (Freeview), satellite systems, cable TV, and DAB\/FM radio signals. The low-noise wideband amplifier maintains a noise figure below 3.8dB, while surge and short-circuit protection with a maximum 87dBuV output limiter prevents damage to downstream equipment. The 75-ohm impedance matches standard UK aerial and distribution cabling. At 270 x 70 x 45mm and 500g, the unit mounts discreetly in loft spaces, cupboards or AV cabinets.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : VHF\u003c\/td\u003e\n\u003ctd\u003e47 - 230MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range : UHF\u003c\/td\u003e\n\u003ctd\u003e470-694MHz(5G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull gain output\u003c\/td\u003e\n\u003ctd\u003e20dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e22dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;3.8dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e2 x coax sockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e230Vac, 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e1.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130033UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the individual outputs and the full gain output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe eight individual outputs each deliver 8dB gain and are designed for connecting directly to TVs or radios. The full gain output delivers 20dB and is typically used to cascade into another distribution amplifier or booster when more than eight outputs are needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with Freeview and satellite signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The amplifier works with Digital Terrestrial (Freeview), satellite, cable TV, and DAB\/FM radio signals. The separate VHF and UHF inputs allow terrestrial aerial signals to be connected independently, while the DC pass supports satellite Magic Eye remote extenders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the LTE filter do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integrated 5G\/4G LTE filter blocks interference from mobile phone signals before amplification. This prevents picture break-up or signal dropout caused by nearby mobile phone masts transmitting in adjacent frequency bands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable connections does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe amplifier uses coaxial socket connections compatible with standard F-type plugs. Four F-type adaptors are included in the box to convert the sockets for use with traditional coax plugs if needed.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313154679051,"sku":"130.033UK","price":35.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/130033UK_0.jpg?v=1784890159"}],"url":"https:\/\/niori.co.uk\/collections\/audio-av.oembed","provider":"Niori","version":"1.0","type":"link"}