{"title":"Adapters \u0026 Switching","description":"\u003cp\u003eOur adapters \u0026amp; switching range is for the connections that need a little help: sending one source to several screens, choosing between several sources on one screen, and joining plugs and sockets that do not match. We stock HDMI splitters, AV switches, HDMI adapters and coaxial adapters, along with some monitor, SCART, USB and networking adapters. Start with the connection you have and the one you need.\u003c\/p\u003e","products":[{"product_id":"av-link-twin-rg6-satellite-extension-kit-3m","title":"AV:Link Twin RG6 Satellite Extension Kit - 3m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link twin RG6 satellite extension kit provides 3m of twin coaxial cable with pre-fitted F-type connectors and two F-type couplers for extending or relocating satellite receivers. Each cable carries a 1mm copper-clad steel (CCS) conductor surrounded by 4.6mm foam polyethylene dielectric, aluminium foil screen and aluminium braid, giving 75 ohm impedance for digital satellite signal transmission.\u003c\/p\u003e\n\u003cp\u003eDesigned for Sky and Freesat box installations where the existing cable run is too short, the kit allows the receiver to be moved to a different room or position without re-running cable from the LNB. The pre-fitted F-type connectors screw directly onto the receiver's input ports, while the two included F-type couplers join the extension cable to the existing cable run. This avoids the need for crimping or soldering on site.\u003c\/p\u003e\n\u003cp\u003eThe twin cable configuration carries two independent signals. Typically used for dual-tuner receivers that record one channel while watching another, or for connecting two separate outputs from a quad LNB to a single receiver. The 6.6mm diameter per cable is standard RG6 gauge, matching most UK satellite installations installed since the mid-2000s. The zinc alloy F-type connectors resist corrosion better than brass-plated steel in damp environments such as loft spaces.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.25KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e2 x 6.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003ctd\u003e0.79mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor diameter\u003c\/td\u003e\n\u003ctd\u003e1mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003eCCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid\u003c\/td\u003e\n\u003ctd\u003e64 x 0.12mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBraid material\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003eAlumnium foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric\u003c\/td\u003e\n\u003ctd\u003e4.6mmØ foam PE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitance\u003c\/td\u003e\n\u003ctd\u003e54pF\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eF type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector material\u003c\/td\u003e\n\u003ctd\u003eZinc alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included in the kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit contains one 3m twin RG6 cable with pre-fitted F-type connectors at both ends (four connectors total, two per cable end) and two F-type barrel couplers for joining to existing cable runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with my existing satellite cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit works with any standard RG6 coaxial cable fitted with F-type connectors. If your existing cable has a different connector type or is a different gauge, you may need an adapter or a different extension solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable and connectors are rated for indoor use and sheltered outdoor runs such as under eaves or in conduit. For fully exposed outdoor runs, use a kit with weatherproof connectors and UV-resistant cable jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does twin cable mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwin cable carries two independent coaxial cables side-by-side, typically used for dual-tuner satellite receivers that need two separate LNB outputs to record one channel while watching another.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313046544651,"sku":"112.023UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112023UK_0.jpg?v=1784888815"},{"product_id":"av-link-2-way-scart-splitter-with-manual-switch-50cm-lead","title":"AV:Link 2-Way SCART Splitter with Manual Switch - 50cm Lead","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 2-way SCART splitter connects two analogue video sources to a single SCART input on a TV or display. A manual rocker switch on the housing selects which source feeds the output, allowing you to switch between a VCR, DVD player, Freeview box or other analogue device without unplugging cables each time.\u003c\/p\u003e\n\u003cp\u003eDesigned for homes and offices still using legacy analogue equipment, the splitter suits scenarios where drawer space or shelf access makes swapping cables impractical. The 50cm lead from the splitter housing to the TV-side SCART plug allows the switch box to sit on a shelf or the floor near the devices rather than hanging directly from the TV socket. Both input sockets on the housing are female 21-pin SCART.\u003c\/p\u003e\n\u003cp\u003eThe housing measures approximately 90mm x 60mm x 25mm and weighs 105g, so it sits stable on a shelf without tipping when cables are inserted. The rocker switch is labelled 1 and 2 to indicate which source is active. The splitter is passive. It requires no external power and simply routes the selected input's composite video, RGB and stereo audio signals to the output.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003e50cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.10KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan both sources be connected at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Both SCART inputs can remain connected permanently. The manual rocker switch selects which source is routed to the TV output at any given time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The splitter is a passive switch box that routes analogue signals mechanically when you flip the rocker switch. No mains adapter or batteries are needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support RGB and composite video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 21-pin SCART connection carries RGB, composite video and stereo audio signals. The splitter passes whichever signal format the connected source device sends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in reverse to send one source to two TVs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The AV:Link is designed as an input selector, not a signal distributor. Using it in reverse may result in poor picture quality or no signal on one or both outputs.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313063026955,"sku":"112.172UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/112172UK_0.jpg?v=1784888973"},{"product_id":"av-link-adsl-signal-filter-bt431a-to-rj11-bt431a","title":"AV:Link ADSL Signal Filter - BT431A to RJ11 \u0026 BT431A","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link ADSL signal filter is a white plastic adapter that converts a single BT431A telephone plug into two outputs: one RJ11 socket for ADSL broadband connection and one filtered BT431A socket for a telephone or fax machine. The internal filter separates the high-frequency ADSL signal from the voice-frequency telephone signal, preventing interference between the two devices when both share the same phone line.\u003c\/p\u003e\n\u003cp\u003eDesigned for UK residential and small office installations where ADSL broadband and a landline telephone connect to the same wall socket, the filter plugs directly into the BT431A master socket or extension and requires no tools or wiring. The ADSL modem or router connects to the RJ11 socket, while the telephone or fax connects to the filtered BT431A socket. Up to four filters can be used on a single telephone line if multiple extension points need filtering, though most installations only require one filter at the master socket.\u003c\/p\u003e\n\u003cp\u003eThe filter weighs 25g and measures approximately 60mm x 40mm x 25mm, so it sits flush against the wall socket without obstructing adjacent sockets or furniture. The white plastic casing matches standard UK telephone wall plates and the design includes no LEDs or moving parts, making it a passive, maintenance-free component once installed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent rating\u003c\/td\u003e\n\u003ctd\u003e431\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eModular (RJ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is an ADSL filter needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eADSL broadband and telephone voice signals share the same copper line but use different frequency ranges. Without a filter, the ADSL signal can cause crackling, static or interference on the telephone line, and the telephone signal can disrupt the broadband connection. The filter separates the two signals so each device receives only the frequencies it needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere should the filter be installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe filter plugs directly into the BT431A wall socket where the ADSL modem or router would normally connect. If you have multiple telephone extension sockets in the property and use phones on those extensions, each extension socket may need its own filter to prevent interference. Most users only need one filter at the master socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple filters be used on one line?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Up to four ADSL filters can be used on a single telephone line if you have multiple extension points. Each extension socket with a connected telephone or fax should have its own filter to prevent the telephone device from interfering with the ADSL signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with fibre broadband?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This filter is designed for ADSL (Asymmetric Digital Subscriber Line) broadband, which runs over traditional copper telephone lines. If your broadband is delivered via fibre-to-the-cabinet (FTTC) or fibre-to-the-premises (FTTP), you typically do not need an ADSL filter as the broadband signal does not share the voice line in the same way.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313094713611,"sku":"113.538UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/113538UK_0.jpg?v=1784889067"},{"product_id":"av-link-rj11-plug-to-2-x-rj11-socket-splitter","title":"AV:Link RJ11 Plug to 2 x RJ11 Socket Splitter","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link RJ11 splitter connects a single RJ11 plug to two RJ11 sockets, allowing two telephone or data devices to share one outlet. The adapter supports standard 6P4C RJ11 wiring used in telephone and ADSL modem connections, with passive pass-through that requires no external power.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and small office use where a single telephone line needs to feed two devices. Such as a landline phone and an ADSL modem, or two separate phone handsets in different rooms connected via extension cable. The splitter fits USA and Southern Ireland telephone socket standards, and the compact form factor allows it to sit flush against a wall plate without blocking adjacent sockets.\u003c\/p\u003e\n\u003cp\u003eThe adapter weighs 11g and measures approximately 40mm across the face, small enough to fit in tight spaces behind furniture or along skirting board cable runs. The two output sockets are wired in parallel, so both devices receive the same signal simultaneously. This is a passive splitter with no filtering or switching. Both outputs are always active when the input plug is connected to a live line.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.01KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for ADSL broadband?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The splitter supports ADSL modem connections and is commonly used to connect a modem and a landline phone to the same telephone socket. Both devices will share the line. If the phone is in use, it may affect broadband performance temporarily.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with UK BT telephone sockets?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis splitter uses RJ11 connectors, which are standard in the USA and Southern Ireland. UK BT telephone sockets use a different connector type (BT431A). To use this splitter with a UK socket, you would need a BT to RJ11 adapter between the wall socket and this splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre both outputs active at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The two RJ11 sockets are wired in parallel, so both receive the same signal simultaneously. This is a passive splitter with no switching or filtering. When the input plug is connected to a live line, both outputs are live.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313094975755,"sku":"113.544UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/113544UK_0.jpg?v=1784889081"},{"product_id":"av-link-coaxial-y-splitter-1-plug-to-2-sockets","title":"AV:Link Coaxial Y Splitter - 1 Plug to 2 Sockets","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link coaxial Y splitter takes one incoming aerial signal and splits it to two output sockets, allowing a single TV aerial or FM radio antenna to feed two separate devices. The splitter has one male coaxial plug on the input side and two female coaxial sockets on the output side, both using standard RF connectors compatible with UK aerial cable.\u003c\/p\u003e\n\u003cp\u003eDesigned for domestic TV and radio installations where one aerial feed needs to supply two rooms or two devices in the same room, the Y splitter provides passive signal distribution without requiring external power. The splitter works with both digital Freeview TV signals and analogue FM radio signals, though splitting the signal between two devices will reduce the signal strength to each output compared to a direct connection.\u003c\/p\u003e\n\u003cp\u003eThe metal-bodied construction and threaded F-type connectors provide a more secure connection than push-fit alternatives, reducing the risk of loose contacts that cause picture breakup or radio interference. The compact hexagonal body measures approximately 40mm across the widest point, with the three connector ports arranged at 120-degree intervals to minimise strain on connected cables.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoaxial (Aerial)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes splitting the signal reduce quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each output receives approximately half the signal strength of the input. In areas with strong aerial signals this is rarely noticeable, but in weak-signal areas it may cause picture breakup on digital TV or poor reception on FM radio. If signal loss is a problem, consider an active aerial amplifier instead of a passive splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe splitter is not weatherproof and is intended for indoor use only. For outdoor signal splitting, use a weatherproof junction box or an external aerial amplifier rated for outdoor installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with satellite signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This splitter is designed for terrestrial TV aerial and FM radio signals only. Satellite signals require a different type of splitter that can pass DC voltage to the LNB.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan more than two devices be connected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot directly. For distribution to three or more devices, use a dedicated multi-way aerial splitter or distribution amplifier designed for that purpose.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313110606091,"sku":"122.048UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122048UK_1.jpg?v=1784889356"},{"product_id":"av-link-coaxial-y-splitter-1-plug-2-sockets","title":"AV:Link Coaxial Y-Splitter 1 Plug 2 Sockets","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link coaxial Y-splitter has one male coaxial plug (input) and two female coaxial sockets (outputs), allowing a single aerial or FM radio feed to be distributed to two devices. The splitter body is a moulded plastic hexagon with three nickel-plated coaxial connectors: one on the left for the incoming signal, and two at angles on the right for the outgoing feeds.\u003c\/p\u003e\n\u003cp\u003eCommon applications include splitting a rooftop TV aerial to feed two televisions in different rooms, or splitting an FM radio aerial to supply two hi-fi tuners without running separate cables from the aerial point. The splitter introduces approximately 3-4dB signal loss on each output due to passive splitting, so the incoming signal strength must be sufficient to maintain picture or sound quality on both connected devices.\u003c\/p\u003e\n\u003cp\u003eThe nickel-plated connectors resist corrosion and provide stable RF contact. The splitter accepts standard F-type or Belling-Lee coaxial plugs (depending on the specific connector standard used in your installation) and fits behind wall plates or within AV cabinets where space is limited. Supplied in a sealed bag.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoaxial (Aerial)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the splitter amplify the signal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a passive splitter, which means it divides the incoming signal between the two outputs without amplification. Each output receives approximately half the input signal strength, resulting in a 3-4dB loss per output. If the incoming signal is weak, you may need an amplified splitter or a separate signal booster.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat type of coaxial connector does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe product image shows standard coaxial barrel connectors. Confirm the specific connector type (F-type or Belling-Lee) before ordering if your installation requires a particular standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for satellite signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePassive coaxial splitters are generally not suitable for satellite signals because satellite installations often require specific voltage and tone signalling to control LNBs. This splitter is designed for terrestrial TV and FM radio aerial splitting only.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313110704395,"sku":"122.051UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122051UK_1.jpg?v=1784889369"},{"product_id":"av-link-right-angle-hdmi-plug-to-socket-adapter-gold-plated","title":"AV:Link Right Angle HDMI Plug to Socket Adapter - Gold Plated","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link right-angle HDMI adapter converts a straight HDMI cable to a 90-degree orientation, with a male HDMI plug on one end and a female HDMI socket on the other. The plug end sits at a right angle to the socket end, allowing HDMI cables to run flat against a wall or downwards from a tight-clearance connection point instead of projecting straight out.\u003c\/p\u003e\n\u003cp\u003eDesigned for wall-mounted TVs, media players installed in confined cabinet spaces, and equipment racks where standard straight HDMI cables would protrude too far from the back panel, the adapter reduces the clearance needed behind the connected device by routing the cable parallel to the surface. Both connectors carry gold-plated pins to maintain signal integrity across the full HDMI bandwidth, supporting 4K video, multi-channel audio and HDCP copy protection without signal degradation.\u003c\/p\u003e\n\u003cp\u003eThe compact adapter body measures approximately 40mm long from plug tip to socket opening, with a molded plastic shell that protects the internal wiring from repeated connection cycles. The right-angle orientation bends the cable run downwards when the plug is inserted horizontally, or sideways when inserted vertically, giving flexibility to route cables in whichever direction the installation demands. The adapter works with all standard HDMI cable types including High Speed HDMI and HDMI with Ethernet variants.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this support 4K and HDR video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adapter maintains full HDMI signal integrity including 4K resolution, HDR metadata, multi-channel audio and HDCP copy protection. It works as a passive connector with no active electronics that would limit bandwidth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich direction does the cable exit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe HDMI plug end sits at 90 degrees to the socket end. When the plug is inserted into a device, the socket opening points perpendicular to the plug direction, allowing the connected cable to run flat against a wall or downwards depending on how the adapter is oriented.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with HDMI cables that have bulky connector housings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adapter works with standard HDMI cables. Very thick or over-moulded cable connectors may be too large to fit the socket opening. Measure the cable connector width before ordering if the cable housing is unusually bulky.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in both directions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. HDMI is bidirectional for standard video and audio signals. The adapter can convert a source device output or a display device input depending on which end you connect to which equipment.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313113325835,"sku":"122.399UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122399UK_0.jpg?v=1784889386"},{"product_id":"av-link-hdmi-female-to-female-coupler-adapter","title":"AV:Link HDMI Female to Female Coupler Adapter","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link HDMI coupler is a female-to-female adapter with HDMI sockets at both ends, designed to join two standard HDMI cables into a single extended run. The coupler supports video resolutions up to 3840 x 2160p (4K) and uses gold-plated contacts to maintain signal integrity across the join.\u003c\/p\u003e\n\u003cp\u003eUsed where a single HDMI cable is too short to reach between a source device and a display, the coupler allows two existing cables to be connected end-to-end without needing to replace either cable. Common applications include extending runs between wall-mounted TVs and AV receivers, projectors and media players, or games consoles and displays where furniture layout or room dimensions prevent a direct single-cable connection.\u003c\/p\u003e\n\u003cp\u003eThe moulded plastic body measures approximately 40mm long and provides strain relief at both socket ends, reducing wear on the cable plugs when the coupler is used in semi-permanent installations behind furniture or within wall cavities. The compact form factor allows the join to sit close to walls or within cable management channels without requiring significant clearance space.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 × 2160p (4K)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this support 4K at 60Hz?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe coupler supports 4K resolution up to 3840 x 2160p. Whether it passes 60Hz refresh rate depends on the HDMI version of the cables being joined. The coupler itself is passive and does not limit refresh rate beyond what the connected cables support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with older HDMI cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The coupler is backwards-compatible with all HDMI cable versions (1.4, 2.0, 2.1). The final signal capability is determined by the oldest component in the chain, whether that's the source device, the cables, or the display.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used to join two long HDMI cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHDMI signal degradation increases with cable length. Joining two cables via a passive coupler creates a longer total run, which may result in dropouts or loss of picture quality on runs exceeding 10-15m total length, particularly at 4K resolution. For runs beyond this, an active HDMI repeater or booster is recommended instead of a passive coupler.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313113391371,"sku":"122.403UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122403UK_0.jpg?v=1784889400"},{"product_id":"av-link-scart-to-rca-s-video-switchable-adaptor","title":"AV:Link Scart to RCA \u0026 S-Video Switchable Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link Scart adaptor converts between a 21-pin Scart connector and three RCA phono sockets (composite video yellow, audio left white, audio right red) plus a 4-pin S-Video socket. A slide switch on the body selects whether the adaptor operates as an input (feeding signal from RCA\/S-Video devices into a Scart socket on a TV) or output (feeding signal from a Scart source out to RCA\/S-Video recorders or displays).\u003c\/p\u003e\n\u003cp\u003eDesigned for connecting legacy equipment where one device uses Scart and the other uses RCA composite or S-Video, the adaptor suits VCRs, DVD players, set-top boxes, camcorders and older game consoles to CRT and early flatscreen TVs with Scart inputs. The switch avoids the need for separate input-only and output-only adaptors when connecting multiple devices in different directions.\u003c\/p\u003e\n\u003cp\u003eThe adaptor body measures 57 x 22 x 51mm and weighs 34g, sitting behind the TV or equipment without strain on the Scart socket. The black plastic housing holds all connections on one face, with the Scart plug protruding from the opposite side. When using S-Video, connect to the S-Video socket and leave the yellow RCA composite socket unused. S-Video carries higher-quality separated luminance and chrominance signals than composite.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003eScart, RCA, S-Video\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e57mm x 22mm x 51mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the input\/output switch do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe switch changes the signal direction. Set to 'input' when feeding RCA or S-Video devices into a TV's Scart socket. Set to 'output' when taking a Scart source signal out to RCA or S-Video displays or recorders. The wrong setting will result in no signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use RCA and S-Video at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Use either the three RCA sockets (composite video + stereo audio) or the S-Video socket (video only, requiring separate audio connection). S-Video provides better picture quality than composite when both devices support it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it convert PAL to NTSC or vice versa?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adaptor is a passive connector change only. It does not convert signal standards, resolutions or formats. Both devices must use the same video standard (PAL, NTSC, SECAM) for the signal to display correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with modern HDMI TVs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnly if the TV has a Scart input socket, which is rare on models manufactured after approximately 2010. For HDMI-only TVs you would need an active video converter box rather than this passive adaptor.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313113456907,"sku":"122.410UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122410UK_0.jpg?v=1784889419"},{"product_id":"av-link-hdmi-socket-to-hdmi-micro-plug-adaptor","title":"AV:Link HDMI Socket to HDMI Micro Plug Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link HDMI adaptor connects a standard HDMI cable to devices with HDMI micro ports, providing a full-size Type-A HDMI socket on one end and a Type-D micro HDMI plug on the other. Both ends carry gold-plated contacts to maintain signal integrity across the short 40mm length of the adaptor body.\u003c\/p\u003e\n\u003cp\u003eDesigned for Raspberry Pi single-board computers, compact cameras, camcorders and tablets that ship with micro HDMI outputs, this adaptor removes the need to carry a dedicated micro HDMI cable. It allows any existing standard HDMI cable to be used with micro-equipped devices, making it practical for temporary connections, testing setups and environments where multiple HDMI cables are already in use.\u003c\/p\u003e\n\u003cp\u003eThe compact 40mm body fits directly into the micro HDMI port without additional cable or strain relief, so it works best in situations where the connected HDMI cable is supported separately or where the device is stationary. The 8.5g weight means the adaptor adds minimal load to the micro port itself, though care should still be taken not to use the adaptor as a lever against the port when inserting or removing cables.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.01KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e40mm x 11mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHDMI F to micro M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between HDMI micro and HDMI mini?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHDMI micro (Type-D) is smaller than HDMI mini (Type-C). This adaptor is specifically for micro HDMI ports, which are commonly found on Raspberry Pi 4, action cameras and some tablets. It will not fit HDMI mini ports.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support 4K video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor itself is a passive connector and does not alter the signal. It will pass whatever resolution the source device and cable support, including 4K where both are capable. However, signal quality depends on the total cable length and quality once the adaptor is in place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be left permanently connected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, though the micro HDMI plug is not designed for frequent insertion and removal. If the device will be connected and disconnected regularly, consider using a short micro HDMI cable instead to reduce wear on the device's port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require drivers or software?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adaptor is a passive connector with no active components. It works immediately when inserted, with no configuration needed on the source device or display.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313113522443,"sku":"122.413UK","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122413UK_0.jpg?v=1784889434"},{"product_id":"av-link-scart-to-hdmi-converter-720p-1080p-usb-powered","title":"AV:Link Scart to HDMI Converter 720p\/1080p - USB Powered","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link Scart to HDMI converter takes analogue video signals from a Scart output and converts them to digital HDMI at either 720p or 1080p resolution, selected via a switch on the unit. The converter accepts PAL, NTSC 3.58\/4.43, SECAM, PAL\/M and PAL\/N input formats, allowing it to work with video equipment from different regions and broadcast standards.\u003c\/p\u003e\n\u003cp\u003eDesigned for connecting older VCRs, DVD players, set-top boxes and games consoles to modern HDMI televisions and monitors, the converter bridges the analogue-to-digital gap without requiring the source device to have component or composite outputs. The unit is powered by USB via the included cable, which can run from a TV's USB port, a mains USB adapter, or a powered USB hub. Maximum supported cable lengths are 8m on the Scart input side and 7m on the HDMI output side before signal degradation becomes a risk.\u003c\/p\u003e\n\u003cp\u003eThe compact 88.5 x 57.5 x 25mm casing sits between devices without occupying significant shelf or cabinet space, and the 60g weight means it can be cable-suspended if the source device sits on a higher shelf. The unit draws a maximum of 350mA at 5V DC during operation, well within the capacity of most TV USB ports rated at 500mA or above. No driver installation or configuration software is needed. Connect the cables, select the output resolution, and the converter begins passing video and audio immediately.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003eScart (PAL, NTSC3\/4, 43 SECAM, PAL\/M, PAL\/N)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003eHDMI (720p, 1080p)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. cable length\u003c\/td\u003e\n\u003ctd\u003eScart input \u0026lt;=8m; HDMI output \u0026lt;=7m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e350mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-10° to 55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower : input\u003c\/td\u003e\n\u003ctd\u003eDC\/5V 1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e88.5mm x 57.5mm x 25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.06KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122416UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it convert audio as well as video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Scart connection carries both video and stereo audio, and both are converted and passed through the HDMI output to the display device.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I power it from the TV's USB port?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost modern TVs provide 500mA or more from their USB ports, which is sufficient for the converter's 350mA maximum draw. If the TV's USB port is rated lower or powers off when the TV is in standby, use a mains USB adapter instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between 720p and 1080p output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e720p outputs at 1280 x 720 resolution, 1080p at 1920 x 1080. The source Scart signal is analogue and lower resolution than either, so the converter upscales the image. Use 1080p if your display is Full HD or above; use 720p for older HD Ready displays or if the image appears over-processed at 1080p.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with NTSC video from non-UK sources?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The converter supports NTSC 3.58, NTSC 4.43, SECAM, PAL\/M and PAL\/N in addition to standard PAL, so it handles video from North American, French and other regional broadcast standards.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313113587979,"sku":"122.416UK","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122416UK_0.jpg?v=1784889449"},{"product_id":"av-link-hdmi-to-scart-converter-pal-ntsc","title":"AV:Link HDMI to Scart Converter - PAL\/NTSC","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link HDMI to Scart converter accepts HDMI v1.3 video signals at up to 60fps and converts them to analogue Scart output in either PAL or NTSC format. The converter handles digital-to-analogue conversion in real-time without adding lag, allowing modern HDMI sources to connect to older Scart-equipped televisions and projectors that lack HDMI inputs.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with Blu-ray players, games consoles, Sky HD boxes, laptops and other HDMI-output devices, the converter sits inline between the source and the display. A PAL\/NTSC switch on the unit selects the output format to match the requirements of the connected display. The converter draws power via a USB cable (included) from a USB port on the source device or a separate USB mains adapter.\u003c\/p\u003e\n\u003cp\u003eThe compact black enclosure measures 88.5 x 57.5 x 25mm and weighs 60g, sitting discreetly behind a TV or alongside AV equipment. The HDMI input accepts cables up to 7m in length, while the Scart output supports cables up to 8m, giving flexibility in placement. The converter operates across a temperature range of -10°C to 55°C and requires no drivers or software installation. Connection and format selection are the only setup steps required.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003eHDMI (up to 1080p @ 60Hz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003eScart (PAL\/NTSC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e300MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e10.2 Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. cable length\u003c\/td\u003e\n\u003ctd\u003eHDMI Input \u0026lt;= 7m; Scart output \u0026lt;=8m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e600mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-10°C to 55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower : input\u003c\/td\u003e\n\u003ctd\u003eDC\/5V 1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e88.5mm x 57.5mm x 25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.06KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122417UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between PAL and NTSC output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePAL is the broadcast standard used in the UK, Europe, Australia and most of the world outside North America and Japan. NTSC is used primarily in North America and Japan. UK and European Scart TVs require PAL output. The converter includes a physical switch to select the correct format for your display.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it convert audio as well as video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The converter processes both the video and audio components of the HDMI signal and outputs them through the Scart connector. The Scart output carries stereo audio alongside the composite video signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat powers the converter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe converter draws 5V DC power via a USB cable (included). You can power it from a USB port on your source device (such as a Blu-ray player or games console) or from a separate USB mains adapter. Maximum current draw is 600mA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there any lag or delay in the conversion?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The converter performs real-time digital-to-analogue conversion with no perceptible delay, making it suitable for gaming and live broadcast where timing matters.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313113653515,"sku":"122.417UK","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122417UK_0.jpg?v=1784889466"},{"product_id":"vga-to-hdmi-adapter-with-audio-full-hd-1080p-converter-kit","title":"VGA to HDMI Adapter with Audio - Full HD 1080p Converter Kit","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis VGA to HDMI adapter kit converts analogue VGA video and 3.5mm audio signals into a single HDMI output supporting resolutions up to 1080p Full HD. The kit comprises a VGA male connector, a 3.5mm audio jack input, an HDMI female socket and a micro USB power input, all housed in a compact 260 x 40 x 15mm converter box with a 15cm integrated VGA cable.\u003c\/p\u003e\n\u003cp\u003eDesigned for connecting older laptops, PCs and presentation equipment with VGA output to modern HDMI-compatible displays, projectors and televisions, the adapter requires active power via the included micro USB cable to perform the analogue-to-digital conversion. The VGA side accepts standard 15-pin D-sub connectors carrying RGB video, while the 3.5mm jack input captures stereo audio that is then embedded into the HDMI stream. You will need a separate HDMI cable to connect the adapter's HDMI socket to your display.\u003c\/p\u003e\n\u003cp\u003eThe converter handles standard VGA resolutions including 640x480, 800x600, 1024x768, 1280x720 and 1920x1080, automatically detecting the input resolution and scaling to match the display's native resolution where needed. The micro USB power cable can be powered from a USB port on the source device, a USB mains adapter, or a USB power bank. At 50g total weight, the adapter sits behind a display without strain on the HDMI socket and is suitable for fixed installation or portable presentation use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. resolution\u003c\/td\u003e\n\u003ctd\u003e1080p\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e15cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e260mm x 40mm x 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.05KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adapter require external power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The kit includes a micro USB cable that must be connected to a USB power source (USB port on a PC, USB mains adapter, or power bank) to perform the analogue-to-digital conversion. Without power the adapter will not output a signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cables are included in the kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit includes the converter unit with an integrated 15cm VGA cable and a micro USB power cable. You will need to supply your own HDMI cable to connect from the adapter's HDMI socket to your display, and a 3.5mm audio cable if your source device has a separate audio output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with a MacBook or older laptop?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided your laptop has a VGA output port. Most laptops built before 2012 included VGA output. If your laptop only has HDMI, DisplayPort or USB-C output, this adapter is not suitable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the adapter support audio?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 3.5mm audio input on the converter accepts stereo audio from a headphone or line-out socket, which is then embedded into the HDMI output stream. If your VGA source device has no separate audio output, the HDMI stream will carry video only.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313114898699,"sku":"122.423UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122423UK_0.jpg?v=1784889491"},{"product_id":"av-link-displayport-to-hdmi-adapter-cable-0-2m-4k-uhd","title":"AV:Link DisplayPort to HDMI Adapter Cable 0.2m - 4K UHD","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link DisplayPort to HDMI adapter is a 0.2m passive cable that converts a DisplayPort source (male plug) to an HDMI output (female socket). The cable supports digital video up to 4K UHD resolution (3840×2160 at 30Hz) and carries embedded multi-channel audio, making it suitable for connecting PCs, laptops and graphics cards with DisplayPort outputs to HDMI-compatible monitors, TVs and projectors.\u003c\/p\u003e\n\u003cp\u003eDesigned for desktop workstation setups, home office dual-monitor configurations and AV presentation systems where the source device has DisplayPort but the display requires HDMI input. The 0.2m length keeps cable runs short behind a desk or wall-mounted display, reducing clutter. You will need a separate HDMI cable to run from the adapter's socket to your display. The adapter acts as the signal converter at the source end.\u003c\/p\u003e\n\u003cp\u003eThe cable uses a unidirectional passive conversion circuit housed in the DisplayPort plug end, so signal flow is DisplayPort input to HDMI output only. It cannot convert HDMI to DisplayPort in reverse. The 4.5mm cable diameter and compact plug housings allow the adapter to fit alongside other cables in tight spaces behind monitors or in desktop cable management trays. At 30g total weight, the adapter puts minimal strain on laptop and PC ports.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. resolution\u003c\/td\u003e\n\u003ctd\u003e4K (3840×2160)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e13.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e4.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e245mm x 45mm x 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adapter work in both directions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a unidirectional adapter that converts DisplayPort output to HDMI input only. It cannot convert an HDMI source to DisplayPort. The conversion circuit is built into the DisplayPort plug end and requires the DisplayPort source to provide the signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat refresh rate does it support at 4K resolution?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adapter supports 4K UHD (3840×2160) at 30Hz refresh rate. For higher refresh rates at 4K you would need an active adapter with external power, as passive cables are limited by the bandwidth available from the DisplayPort source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a separate HDMI cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. This adapter has a female HDMI socket on one end, so you need a standard male-to-male HDMI cable to run from the adapter to your display. The adapter sits at the source end (PC or laptop) and converts the signal before it travels down the HDMI cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it carry audio as well as video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adapter passes embedded multi-channel audio from the DisplayPort source through to the HDMI output, provided the source is configured to send audio over DisplayPort. Check your PC or laptop audio settings to ensure DisplayPort audio output is enabled.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313114964235,"sku":"122.425UK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122425UK_0.jpg?v=1784889506"},{"product_id":"av-link-displayport-to-vga-adapter-cable-15cm","title":"AV:Link DisplayPort to VGA Adapter Cable - 15cm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link DisplayPort to VGA adapter is a 15cm cable that converts digital DisplayPort signals to analogue VGA output, allowing computers with DisplayPort outputs to connect to older VGA monitors and projectors. The adapter features a DisplayPort plug on one end and a VGA socket on the other, requiring a standard VGA cable (sold separately) to complete the connection to the display.\u003c\/p\u003e\n\u003cp\u003eDesigned for office, education and home setups where newer laptops or PCs need to connect to legacy VGA displays, the adapter handles the digital-to-analogue conversion internally. This makes it useful for presentation rooms, classrooms and home offices that still rely on older projectors or monitors without HDMI or DisplayPort inputs. The 15cm cable length keeps the adapter close to the source device, minimising cable clutter.\u003c\/p\u003e\n\u003cp\u003eThe adapter weighs 34g and measures 240 x 45 x 15mm including connectors, making it compact enough to carry in a laptop bag for mobile presentations. The VGA socket accepts any standard VGA cable, giving flexibility to use existing cabling infrastructure without replacing monitors or projectors that still function reliably.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e15cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e240mm x 45mm x 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adapter require external power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adapter draws power from the DisplayPort connection on the source device, so no external power supply is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included in the box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adapter cable only. A separate VGA cable is required to connect the VGA socket on the adapter to your monitor or projector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support audio output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. VGA is a video-only standard, so audio signals are not carried through this adapter. Audio will need to be routed separately from the source device to speakers or the display's audio input if available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat resolution does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDisplayPort to VGA adapters typically support resolutions up to 1920 x 1200 or 1080p, depending on the source device and display capabilities. Higher resolutions may not be supported due to VGA bandwidth limits.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313115029771,"sku":"122.427UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122427UK_0.jpg?v=1784889521"},{"product_id":"av-link-usb-3-0-type-c-socket-to-type-a-otg-plug-adaptor","title":"AV:Link USB 3.0 Type-C Socket to Type-A OTG Plug Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link USB 3.0 Type-C to Type-A OTG adaptor converts a USB Type-C plug into a Type-A connection, enabling USB-C devices to connect to standard USB-A ports for data transfer and charging. The adaptor supports USB 3.0 data transfer speeds up to 5Gbps, allowing quick file transfers between smartphones, tablets, laptops and desktop computers fitted with Type-A USB sockets.\u003c\/p\u003e\n\u003cp\u003eDesigned for on-the-go use, the adaptor measures 32 x 14 x 6mm and weighs 4g, making it small enough to carry in a laptop bag or pocket without bulk. The OTG (On-The-Go) specification allows compatible devices to act as either host or peripheral, so a smartphone can read data from a USB flash drive or external hard drive fitted with a Type-A plug when connected via this adaptor. The plug-and-play design requires no drivers on Windows, macOS, Linux or Android systems that support OTG.\u003c\/p\u003e\n\u003cp\u003eThe Type-C socket end accepts any standard USB-C plug, while the Type-A plug end fits any USB-A port including those found on older laptops, desktop PCs, car chargers and power banks. The compact plastic housing protects the internal contacts and provides strain relief where the cable enters each connector. The adaptor works with both USB 3.0 and USB 2.0 ports, automatically negotiating the highest supported speed.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData transfer rate\u003c\/td\u003e\n\u003ctd\u003eUp to 5Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e32mm x 14mm x 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adaptor support fast charging?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor passes through the power delivery capabilities of the USB-A port it's connected to. If the Type-A port supports higher current output (e.g. 2.4A or greater), the adaptor will pass that current to the connected USB-C device. It does not support USB-C Power Delivery fast charging protocols, which require a direct Type-C connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with USB-C to USB-C cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This adaptor has a Type-C socket and a Type-A plug, so it's designed to connect a USB-C device (or USB-C cable) to a Type-A port. To connect a USB-C device to another USB-C port, use a direct USB-C to USB-C cable instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat devices support OTG functionality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost modern Android smartphones and tablets support OTG, allowing them to act as a host and read data from USB storage devices, keyboards or other peripherals. Apple iOS devices do not support standard USB OTG. Check your device specifications or settings to confirm OTG support before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with USB 2.0 ports?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adaptor works with both USB 3.0 and USB 2.0 Type-A ports. When connected to a USB 2.0 port, data transfer speeds are limited to 480Mbps (USB 2.0 maximum) rather than the 5Gbps USB 3.0 speed.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313115259147,"sku":"122.433UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122433UK_0.jpg?v=1784889573"},{"product_id":"av-link-usb-3-0-type-a-socket-to-type-c-plug-otg-adaptor","title":"AV:Link USB 3.0 Type-A Socket to Type-C Plug OTG Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link USB 3.0 Type-A to Type-C OTG adaptor converts a USB 3.0 Type-A socket into a USB Type-C plug, supporting data transfer rates up to 5Gbps. The adaptor measures 31 x 15 x 7mm and weighs 4g, making it small enough to keep attached to a cable or in a laptop bag without adding bulk.\u003c\/p\u003e\n\u003cp\u003eDesigned for on-the-go sync and charge applications, the adaptor allows USB-A peripherals (flash drives, keyboards, mice, external hard drives) to connect to devices with USB-C ports such as modern laptops, tablets and smartphones. The plug-and-play operation requires no drivers or software installation on Windows, macOS, Linux or Android systems.\u003c\/p\u003e\n\u003cp\u003eThe USB 3.0 specification supports backward compatibility with USB 2.0 devices, though transfer speeds will be limited to the slower device's maximum rate. The compact form factor means the adaptor sits close to the port without placing twisting stress on the USB-C socket, reducing the risk of port damage compared to longer or heavier adapters.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData transfer rate\u003c\/td\u003e\n\u003ctd\u003eUp to 5Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e31mm x 15mm x 7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adaptor support charging as well as data transfer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adaptor supports both sync and charge applications, allowing USB-A charging cables to connect to USB-C devices. Charging speed depends on the power output of the USB-A source and the device being charged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with USB 2.0 devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The USB 3.0 specification is backward compatible with USB 2.0. If you connect a USB 2.0 device through this adaptor, the transfer speed will be limited to USB 2.0's maximum of 480Mbps rather than the 5Gbps the adaptor supports.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with all USB-C devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor works with any device that has a USB-C port supporting USB 3.0 or USB 2.0 protocols. It does not support video output (DisplayPort Alt Mode) or Thunderbolt protocols.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require drivers or software?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adaptor uses standard USB protocols and works plug-and-play on Windows, macOS, Linux and Android without requiring driver installation.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313115324683,"sku":"122.434UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122434UK_0.jpg?v=1784889589"},{"product_id":"hdmi-to-vga-adapter-cable-with-usb-power-140mm-lead","title":"HDMI to VGA Adapter Cable with USB Power - 140mm Lead","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis AV:Link HDMI to VGA adapter cable converts a digital HDMI output from a laptop, PC or media device into an analogue VGA signal for connection to older monitors, projectors and displays that lack HDMI inputs. The adapter houses a digital-to-analogue converter chip in a compact 45mm housing, with a 140mm HDMI cable on one side and a female VGA socket plus USB power input on the other.\u003c\/p\u003e\n\u003cp\u003eDesigned for conference rooms, classrooms and home offices where newer laptops need to connect to legacy VGA projectors or monitors, the adapter removes the need for a separate converter box. The USB power input draws from a laptop USB port or mains USB charger to power the internal conversion chip, as VGA alone cannot supply power. The gold-plated HDMI connector ensures stable signal transfer from the source device.\u003c\/p\u003e\n\u003cp\u003eThe adapter converts video only. VGA does not carry audio, so a separate 3.5mm audio cable from the source device to external speakers is needed if sound is required. The 140mm HDMI lead gives enough length to route from a laptop HDMI port to the edge of a desk, where the VGA socket accepts a standard male-to-male VGA cable running to the display. The compact housing and short lead length keep cable clutter minimal in portable setups.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e140mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : diameter\u003c\/td\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e235mm x 45mm x 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adapter carry audio?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. VGA is a video-only standard and cannot carry audio. If your display has speakers, you will need a separate 3.5mm audio cable from the source device's headphone socket to the display's audio input or to external speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does it need USB power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adapter contains a digital-to-analogue converter chip that requires power to operate. HDMI can output power but VGA cannot, so the USB input draws power from a laptop USB port or mains USB charger to run the conversion circuitry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable connects the VGA socket to the display?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou will need a separate male-to-male VGA cable (not included) to run from the female VGA socket on this adapter to the male VGA input on your monitor or projector. VGA cables are available separately in various lengths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with 4K HDMI sources?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVGA supports a maximum resolution of 1920x1200 at 60Hz. If the HDMI source outputs 4K, the adapter will down-convert the signal to the maximum resolution the VGA display can handle, typically 1080p or lower depending on the monitor.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313116471563,"sku":"122.437UK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122437UK_0.jpg?v=1784889605"},{"product_id":"mercury-2-way-satellite-f-splitter-5-2250mhz","title":"Mercury 2-Way Satellite F Splitter 5-2250MHz","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Mercury 2-way satellite F splitter divides a single satellite feed into two outputs, allowing two receivers to connect to one dish through F-type coaxial connectors. The splitter supports frequencies from 5MHz to 2250MHz, covering standard satellite TV bands including Ku-band (10.7-12.75GHz downconverted to IF) and L-band signals from LNBs.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential and light commercial satellite installations, the splitter fits into standard coaxial runs between an LNB and two receivers or set-top boxes. The zinc die-cast housing provides RF shielding to reduce interference and maintains impedance matching across the frequency range. The F-type connectors accept standard satellite coaxial cable with push-fit or threaded connection depending on the cable type used.\u003c\/p\u003e\n\u003cp\u003eThe splitter introduces signal loss (insertion loss) across both outputs, which is a normal characteristic of passive RF splitting. Most domestic satellite installations can accommodate this loss without needing additional amplification, provided the incoming signal strength from the LNB is adequate. For installations with long cable runs or multiple splits, checking signal levels after installation ensures reliable reception.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003e5MHz - 2250MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan I connect two satellite boxes to one dish using this splitter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided both receivers are viewing channels from the same polarisation and frequency band at the same time. For independent viewing (different channels simultaneously), a twin or quad LNB on the dish is required instead, giving each receiver its own dedicated feed. A splitter shares one LNB output between two receivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cables does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe F-type connectors accept standard satellite coaxial cable (typically RG6 or CT100). The connectors are compatible with both push-fit F-connectors and threaded F-connectors depending on the cable preparation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the splitter need power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The Mercury is a passive splitter and does not require external power. It allows DC power pass-through from the receiver to the LNB on one output path, so ensure the powered receiver connects to the DC-pass port if your installation uses LNB power from the receiver.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313120534795,"sku":"122.807UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122807UK_0.jpg?v=1784885564"},{"product_id":"stv203-3-way-satellite-f-splitter-5-2450mhz","title":"STV203 3-Way Satellite F Splitter 5-2450MHz","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe STV203 is a 3-way satellite F splitter that divides one satellite feed into three separate outputs, operating across the 5-2450MHz frequency range. The unit features F-type threaded connectors on all four ports (one input, three outputs) and incorporates power pass functionality on every output, allowing voltage to pass through to LNBs on all connected receivers simultaneously.\u003c\/p\u003e\n\u003cp\u003eDesigned for multi-receiver satellite installations in homes, flats, caravans and commercial properties, the STV203 allows three satellite receivers or set-top boxes to operate from a single dish feed without requiring additional cabling runs. The zinc die-cast housing measures approximately 60mm x 40mm and mounts to walls or joists using the two flanged mounting tabs, each with a 6mm hole. The compact footprint suits installation behind wall plates or within distribution cabinets.\u003c\/p\u003e\n\u003cp\u003eThe 5-2450MHz bandwidth covers both standard satellite TV frequencies and the extended range used by modern Sky Q and Freesat systems. Power pass on all outputs means the splitter does not block the DC voltage that receivers send back up the coax to power the LNB at the dish, making it compatible with most domestic satellite setups. The unit carries CE certification under G687 659D and uses a zinc alloy body for shielding and durability.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003e5MHz - 2250MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this splitter work with Sky Q systems?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 5-2450MHz frequency range covers the extended bandwidth used by Sky Q and other modern satellite systems. The power pass on all outputs allows voltage to reach the LNB from any connected receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill I lose signal strength when splitting to three outputs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome signal loss is inherent in any passive splitter. The STV203 divides the input signal across three outputs, which reduces the level at each receiver compared to a direct connection. For installations where receivers are close to the dish and signal strength is already good, this is rarely an issue. In marginal signal areas, amplification may be needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this to split terrestrial TV aerial signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe STV203 is designed for satellite installations and uses F-type connectors rather than the coax plugs typical of terrestrial aerial systems. While the frequency range technically covers terrestrial TV bands, the connector type makes it impractical for standard aerial distribution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the splitter mounted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo flanged mounting tabs with 6mm holes allow the unit to be screwed to a wall, joist or the back of a distribution cabinet. The compact size also allows it to be tucked behind wall plates or inside joinery where space is limited.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313123090699,"sku":"122.823UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/122823UK_0.jpg?v=1784889778"},{"product_id":"av-link-rca-composite-to-hdmi-upscaler-1080p","title":"AV:Link RCA Composite to HDMI Upscaler - 1080p","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link AV2HDMI is a composite RCA to HDMI upscaler that converts analogue CVBS video and stereo audio into digital HDMI output at either 720p or 1080p resolution. The converter accepts the three-RCA composite connection standard (yellow video, red\/white audio) from older equipment and outputs over a single HDMI cable to modern TVs, monitors and projectors.\u003c\/p\u003e\n\u003cp\u003eDesigned for connecting legacy devices to current displays, the converter suits retro gaming consoles, VCRs, older camcorders, DVD players and set-top boxes that predate HDMI. The resolution switch on the top panel selects between 720p@60Hz and 1080p@60Hz output, allowing the user to match the native resolution of the display or prioritise compatibility over upscaling quality depending on the source material.\u003c\/p\u003e\n\u003cp\u003eThe converter is powered via a mini-USB port on the side panel, drawing 5V DC from any standard USB power adapter, PC USB port, or TV USB service port. The 66 x 55 x 20mm footprint and 35g weight make the unit small enough to sit behind a TV or be cable-tied to the back of a monitor without additional mounting. The unit accepts PAL, NTSC, SECAM and their variants automatically, so no manual switching is needed when changing between region-locked source devices.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connections\u003c\/td\u003e\n\u003ctd\u003eRCA x 3 (CVBS, Audio L\/R)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connection\u003c\/td\u003e\n\u003ctd\u003eHDMI socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo input\u003c\/td\u003e\n\u003ctd\u003ePAL, NTSC3.58, NTSC4.43, SECAM, PAL\/M, PAL\/N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo output\u003c\/td\u003e\n\u003ctd\u003e1080p@60Hz, 720p@60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower : input\u003c\/td\u003e\n\u003ctd\u003eDC\/5V (mini USB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e66mm x 55mm x 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.04KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128511UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this converter work with SCART devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This converter accepts only composite RCA connections (yellow video, red\/white audio). If your device has SCART output, you will need a SCART-to-RCA adapter cable before connecting to this converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between 720p and 1080p output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e720p output is 1280 x 720 pixels; 1080p is 1920 x 1080 pixels. The converter upscales the analogue composite input (typically 576i or 480i) to whichever HD resolution you select. Most modern displays handle both, but some older HD-ready TVs may only support 720p reliably.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a USB power adapter included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA USB power cable (mini-USB) is included. You will need to supply your own USB power adapter, or you can power the converter from a USB port on your TV or a PC.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this improve the picture quality of VHS tapes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe converter upscales the resolution but cannot add detail that is not present in the source. VHS tapes will still show analogue artefacts (noise, tracking lines, colour bleed) but will be displayed at the correct aspect ratio and resolution on a modern HDMI screen.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313142522123,"sku":"128.511UK","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128511UK_0.jpg?v=1784889808"},{"product_id":"av-link-hdmi-to-composite-rca-av-converter-1080p-to-pal-ntsc","title":"AV:Link HDMI to Composite RCA AV Converter - 1080p to PAL\/NTSC","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link HDMI to Composite RCA converter takes a 1080p or 720p HDMI signal and scales it down to analogue composite video (CVBS) with stereo audio on three RCA phono outputs. The unit accepts HDMI input from laptops, media players, set-top boxes and game consoles, then converts the digital signal to analogue for connection to older CRT TVs, VHS recorders, composite-only projectors and legacy monitors that lack HDMI input.\u003c\/p\u003e\n\u003cp\u003eDesigned for home users connecting modern streaming devices to older equipment, AV installers maintaining legacy projector systems, and educational or corporate environments where older displays remain in service, the converter operates plug-and-play with no driver installation. Power is drawn from a USB port (cable included) or a standard USB mains adapter (not included). The unit sits between the HDMI source and the composite display, with the HDMI socket on one side and three colour-coded RCA phono sockets (yellow video, red\/white audio) on the opposite side.\u003c\/p\u003e\n\u003cp\u003eThe 66 x 55 x 20mm metal-cased unit weighs 38g and can be cable-tied behind equipment racks or placed on a desktop without movement. The converter supports PAL, NTSC 3.58, NTSC 4.43, SECAM, PAL\/M and PAL\/N output formats, selected via a switch on the side panel. Video input resolution is auto-detected, handling both 1080p@60Hz and 720p@60Hz HDMI sources. Output is always composite standard definition regardless of input resolution, as this is the maximum resolution composite video supports.\u003c\/p\u003e\n\u003cp\u003eHDMI sources with HDCP copy protection may not display if the content is restricted from analogue output. The converter passes unprotected signals without issue, making it suitable for personal media libraries, presentations and educational content rather than commercial streaming services with active HDCP enforcement.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connections\u003c\/td\u003e\n\u003ctd\u003eHDMI socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connections\u003c\/td\u003e\n\u003ctd\u003eRCA x 3 (CVBS, Audio L\/R)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo input\u003c\/td\u003e\n\u003ctd\u003e1080p@60Hz, 720p@60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo output\u003c\/td\u003e\n\u003ctd\u003ePAL, NTSC3.58, NTSC4.43, SECAM, PAL\/M, PAL\/N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower : input\u003c\/td\u003e\n\u003ctd\u003eDC\/5V (mini USB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e66mm x 55mm x 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.04KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128512UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this converter work with Netflix or streaming services?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHDMI sources with HDCP copy protection may not output through this converter if the content provider restricts analogue conversion. It works reliably with personal media libraries, presentations and unprotected video sources. Commercial streaming services often enforce HDCP, which can prevent signal passthrough.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power supply does it need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe converter is powered via a mini USB port rated at 5V DC. A USB cable is included in the box. You can power it from a laptop USB port, a TV's USB port, or a standard USB mains adapter (not included).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I select between PAL and NTSC?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA format switch on the side panel toggles between PAL, NTSC 3.58, NTSC 4.43, SECAM, PAL\/M and PAL\/N. For UK use, select PAL. For North American legacy displays, select NTSC 3.58.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat resolution is the composite output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eComposite video is standard definition only, typically 576i for PAL or 480i for NTSC. The converter scales the 1080p or 720p HDMI input down to match the composite format. You cannot achieve HD resolution through composite video.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313142587659,"sku":"128.512UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128512UK_0.jpg?v=1784889834"},{"product_id":"av-link-4k-hdmi-digital-audio-extractor-toslink-3-5mm-output","title":"AV:Link 4K HDMI Digital Audio Extractor - Toslink \u0026 3.5mm Output","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 4K HDMI Digital Audio Extractor splits an HDMI signal into separate video and audio outputs, sending the video onwards via HDMI while extracting the audio via either a Toslink optical port or a 3.5mm stereo jack. The device accepts one HDMI input supporting resolutions up to 3840 x 2160 at 30Hz (HDMI 1.4b, HDCP 1.4), passes that video signal through to its HDMI output port, and simultaneously routes the embedded audio to both the Toslink and 3.5mm outputs on the front panel.\u003c\/p\u003e\n\u003cp\u003eDesigned for situations where a display lacks usable audio outputs. Common with projectors, older monitors, and some televisions. The extractor sits inline between the source device (games console, Blu-ray player, streaming box, set-top box) and the display. The Toslink output connects to AV receivers, soundbars or active speakers with optical inputs, while the 3.5mm output handles wired headphones, powered desktop speakers, or analogue stereo amplifiers. Both outputs are live simultaneously, though most users will connect only one at a time.\u003c\/p\u003e\n\u003cp\u003eThe extractor measures 60 x 58 x 22mm and draws power via a micro-USB port on the side panel (cable included, USB mains adapter not included. Any standard 5V USB charger or spare USB port on a TV or console will power the unit). The black metal enclosure has no active cooling and runs silently. Audio formats supported include stereo PCM, DSD and HBR (high bit-rate audio passthrough for formats like Dolby TrueHD and DTS-HD Master Audio when output via Toslink to a compatible receiver).\u003c\/p\u003e\n\u003cp\u003eThe device is plug-and-play with no driver installation or configuration required. HDMI and audio sync is maintained without perceptible delay, making the extractor suitable for gaming where audio lag would disrupt gameplay. Weight is 102g.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connections\u003c\/td\u003e\n\u003ctd\u003eHDMI (4K)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connections\u003c\/td\u003e\n\u003ctd\u003eHDMI (4K), Optical (Toslink), 3.5mm (Stereo)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 x 2160 @ 30Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP version\u003c\/td\u003e\n\u003ctd\u003e1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio output\u003c\/td\u003e\n\u003ctd\u003eStereo, DSD and HD (HBR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower : input\u003c\/td\u003e\n\u003ctd\u003eDC\/5V (micro USB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e60mm x 58mm x 22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.10KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128514UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan both audio outputs be used at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth the Toslink and 3.5mm outputs are active simultaneously. You can connect both a soundbar via Toslink and headphones via 3.5mm if needed, though most setups use only one output at a time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it add audio delay for gaming?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The extractor maintains HDMI and audio sync without perceptible latency, making it suitable for gaming where audio lag would disrupt timing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat powers the unit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe extractor is powered via a micro-USB port on the side. A USB cable is included in the box. You can power it from any standard 5V USB charger, a spare USB port on your TV, games console, or a USB mains adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support 4K at 60Hz?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The maximum supported resolution is 3840 x 2160 at 30Hz (4K UHD at 30Hz). For 4K content at 60Hz you would need a different extractor supporting HDMI 2.0 or higher.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313142784267,"sku":"128.514UK","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128514UK_0.jpg?v=1784889856"},{"product_id":"av-link-3-port-hdmi-switch-with-ir-remote-4k-support","title":"AV:Link 3-Port HDMI Switch with IR Remote - 4K Support","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 3-port HDMI switch routes three HDMI sources to a single display, with input selection controlled by either the included IR remote or a button on the switch itself. Three green LEDs on the front panel indicate which input is currently active, and the unit requires no external power supply. It draws power directly from the HDMI cables connected to it.\u003c\/p\u003e\n\u003cp\u003eDesigned for home cinema setups, gaming consoles and presentation environments where multiple HDMI sources need to share one screen, the switch supports HDMI 1.4a with up to 4K resolution at 60Hz, 1080p Full HD, 3D content and 8-bit deep colour. Audio pass-through includes DTS-HD, Dolby TrueHD, DTS, Dolby AC3 and DSD formats, making it suitable for multi-channel AV receivers and soundbars that decode lossless audio.\u003c\/p\u003e\n\u003cp\u003eThe compact 77 x 56 x 15mm metal chassis fits behind a wall-mounted TV or sits unobtrusively on an AV rack shelf, and the 40g weight allows it to be cable-tied to the back of a display without additional support. HDCP2.2 compliance ensures compatibility with protected content from streaming boxes, Blu-ray players and modern games consoles. The remote uses a CR2025 coin cell battery (supplied) and operates via line-of-sight IR.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo format\u003c\/td\u003e\n\u003ctd\u003eUp to 4K, 1080p @ 60Hz, 3D, 8bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD, Dolby-trueHD, DTS, Dolby-AC3 and DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-15 to +55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e340MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e3.4Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e150mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e77mm x 56mm x 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.04KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery : remote\u003c\/td\u003e\n\u003ctd\u003eCR2025 (supplied)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128820UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this switch need external power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The switch is bus-powered, drawing up to 150mA from the HDMI cables connected to it. This works reliably when connected to active HDMI sources like set-top boxes, games consoles and Blu-ray players. If your sources do not provide enough power over HDMI, the switch may not operate correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it switch automatically between inputs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Input selection is manual only, controlled by the IR remote or the button on the unit. The switch does not detect signal presence or auto-switch to an active input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum cable length supported?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHDMI cable performance varies by quality and construction. Most standard HDMI cables up to 5m work reliably with this switch at 1080p. For 4K content or longer runs, use certified Premium High Speed HDMI cables to avoid signal degradation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with HDMI 2.0 or 2.1 sources?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe switch is HDMI 1.4a, so it will pass 4K at 60Hz and supports HDCP2.2 for protected content. HDMI 2.0 and 2.1 features such as HDR10+, variable refresh rate and 4K at 120Hz are not supported. The signal will be downscaled to the maximum supported by HDMI 1.4a.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313143603467,"sku":"128.820UK","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128820UK_0.jpg?v=1784889887"},{"product_id":"av-link-1x2-hdmi-splitter-4k-bus-powered","title":"AV:Link 1x2 HDMI Splitter 4K - Bus Powered","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 128.825UK is a 1-input 2-output HDMI splitter that sends a single HDMI source to two displays simultaneously. The unit supports 4K resolution, 1080p at 60Hz, 3D content and up to 36-bit deep colour, with HDCP 2.2 compliance for protected content. It draws power directly from the HDMI signal (bus-powered), with an optional USB power cable included for installations where the HDMI source cannot supply sufficient current.\u003c\/p\u003e\n\u003cp\u003eDesigned for home theatre systems, digital signage, retail displays and AV installations where one source needs to feed multiple screens, the splitter handles both video and audio pass-through. Audio formats include DTS-HD, Dolby TrueHD, DTS\/Dolby AC3 and DSD HD (HBR), so it works with surround sound systems and stereo outputs without re-encoding. Two green LEDs on the front panel indicate active output status for each HDMI port.\u003c\/p\u003e\n\u003cp\u003eThe compact 62 x 51 x 11mm ABS housing can sit behind a TV, inside an AV rack or on a desk without taking up rack space. Maximum bandwidth of 340MHz and a 3.4Gbps baud rate allow the splitter to handle full 4K streams without signal degradation. The unit can also function as a signal booster when placed at the end of a long HDMI cable run, regenerating the signal before it reaches the display. Operating temperature range is -15 to +55°C, suitable for indoor commercial and residential environments.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo format\u003c\/td\u003e\n\u003ctd\u003e4K, Up to 1080p @ 60Hz, 3D, 36bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD, Dolby-trueHD, DTS\/Dolby-AC3, DSD HD(HBR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-15 to +55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e340MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e3.4Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e350mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e62mm x 51mm x 11mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128825UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this require external power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The splitter draws power from the HDMI signal itself (bus-powered). A USB power cable is included for installations where the HDMI source cannot supply enough current, but most modern sources (set-top boxes, Blu-ray players, game consoles) provide sufficient power without it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with 4K HDR content?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe splitter supports 4K resolution and is HDCP 2.2 compliant, which is required for protected 4K content. However, HDMI 1.4a does not natively support HDR metadata pass-through, so HDR content may display as standard dynamic range on the connected displays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo both outputs show the same image?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. This is a splitter, not a matrix switcher. Both HDMI outputs display identical content from the single input source at the same time. The outputs cannot show different content or be controlled independently.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it extend HDMI cable runs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The splitter regenerates the HDMI signal, so it can be placed at the end of a long cable run (up to the limits of passive HDMI cable length) to boost the signal before it reaches the display, effectively extending the maximum distance.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313143701771,"sku":"128.825UK","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128825UK_0.jpg?v=1784889907"},{"product_id":"av-link-3-port-hdmi-switch-full-hd-1080p","title":"AV:Link 3-Port HDMI Switch - Full HD 1080p","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 3-port HDMI switch routes three HDMI source devices to a single HDMI display through manual button selection on the switch body. Built to HDMI 1.3b specification, it handles video up to 1080p at 60Hz with 12-bit deep colour and passes stereo or multi-channel audio formats including Dolby TrueHD and DTS-HD Master Audio through the HDMI signal path.\u003c\/p\u003e\n\u003cp\u003eDesigned for home theatre racks, TV cabinets and desktop setups where multiple sources (games consoles, set-top boxes, media players) connect to one screen, the switch eliminates cable swapping at the display end. A button on the top face cycles through inputs 1, 2 and 3, with corresponding LED indicators showing the active source. The 45cm attached cable terminates in a male HDMI connector for the output run to the TV or monitor.\u003c\/p\u003e\n\u003cp\u003eThe compact 80mm x 90mm footprint allows the switch to sit behind a TV stand or inside a cabinet without taking meaningful space. Gold-plated HDMI connectors provide corrosion resistance and reduce signal degradation over repeated plug cycles. No external power supply is required. The switch draws operating power from the +5V line carried by the HDMI cables themselves, which works reliably when all connected devices are powered on.\u003c\/p\u003e\n\u003cp\u003eThe switch operates passively with no upscaling, re-timing or EDID management, meaning it works best when all connected sources output similar resolutions and the display has broad format compatibility. For complex multi-format setups or automatic switching based on source power state, an active HDMI matrix is a better fit, but for straightforward manual switching between three similar devices this passive switch provides a cost-effective and zero-latency solution.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo format\u003c\/td\u003e\n\u003ctd\u003eUp to 4K @ 30Hz, 12bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e2.5Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable : length\u003c\/td\u003e\n\u003ctd\u003e45cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e80cm x 90cm x 15cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.08KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it switch automatically when a source is turned on?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a manual switch requiring the user to press the button on the switch body to cycle through inputs 1, 2 and 3. LED indicators show which input is currently active.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need an external power supply?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The switch draws operating power from the +5V line carried by the HDMI cables. All connected source devices and the display must be powered on for the switch to function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with 4K sources or displays?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe switch is rated to HDMI 1.3b specification with a maximum of 1080p at 60Hz. It will pass a 4K signal if the source and display negotiate a compatible handshake, but the switch itself does not guarantee 4K compatibility and may cause the source to default to 1080p output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat audio formats does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHDMI 1.3b supports stereo PCM, Dolby Digital, DTS, Dolby TrueHD and DTS-HD Master Audio passed through the HDMI signal. The switch does not extract or convert audio. It passes whatever the source outputs within the HDMI 1.3b bandwidth limit.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313143800075,"sku":"128.831UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128831UK_0.jpg?v=1784889939"},{"product_id":"av-link-4k-hdmi-2-0-repeater-60hz-at-10m","title":"AV:Link 4K HDMI 2.0 Repeater - 60Hz at 10m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 4K HDMI 2.0 repeater is a 50mm inline signal booster that extends HDMI connections beyond standard cable length limits without adding signal degradation. It supports 4K resolution at 60Hz over a combined 10m cable run (5m input + 5m output) or Full HD and 4K@30Hz over 40m (20m input + 20m output), allowing source devices to connect to displays at greater distances than a single HDMI cable can reliably achieve.\u003c\/p\u003e\n\u003cp\u003eDesigned for home cinema installations, commercial AV setups, digital signage and gaming rigs where the display sits more than 5m from the source, the repeater sits inline between two HDMI cables and draws power directly from the HDMI bus, eliminating the need for external power supplies or wall adapters. The unit passes HDCP 2.2 handshake data between source and display, maintaining compatibility with protected 4K streaming content from Netflix, Amazon Prime Video and UHD Blu-ray players.\u003c\/p\u003e\n\u003cp\u003eThe aluminium housing measures 50 x 30 x 18mm and weighs 21g, small enough to tuck behind a wall-mounted TV or inside an AV cabinet without adding visible bulk to the cable run. The repeater supports high-bitrate audio formats including Dolby TrueHD, DTS-HD Master Audio, Dolby AC3 and DSD, passing multi-channel soundtracks to AV receivers and soundbars without downmixing or compression. Maximum bandwidth of 600MHz and 18Gbps aggregate data rate (3 x 6Gbps lanes) ensures compatibility with HDR10, HDR10+ and Dolby Vision metadata where supported by the connected devices.\u003c\/p\u003e\n\u003cp\u003eThe unit operates on the HDMI 2.0b specification and is backward-compatible with HDMI 1.4 and earlier devices, automatically negotiating the highest common resolution and refresh rate between source and display. For maximum distance and signal integrity, pair the repeater with certified high-speed HDMI cables rated for 18Gbps. Lower-quality cables may limit effective distance or introduce handshake failures at 4K@60Hz.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 x 2160P @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD, Dolby True, DTS, Dolby-AC3 and DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP version\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e600MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e3x 6Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e300mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission distance\u003c\/td\u003e\n\u003ctd\u003e10m 4K@60Hz (5m input\/5m output), 40m 4K@30Hz and 1080p (20m input\/20m output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e50mm x 30mm x 18mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.02KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128832UK.pdf?v=1784889962\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this repeater need external power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The repeater draws up to 300mA directly from the HDMI bus, so no external power supply or USB cable is required. It operates purely from the power carried within the HDMI connection itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum distance for 4K at 60Hz?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe repeater supports 4K@60Hz over a combined 10m cable run. Typically 5m from source to repeater and 5m from repeater to display. For longer runs up to 40m combined, resolution drops to 4K@30Hz or Full HD@60Hz depending on the source device output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it\u003c\/strong\u003e\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313143865611,"sku":"128.832UK","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128832UK_0.jpg?v=1784889951"},{"product_id":"av-link-2x4-hdmi-matrix-switch-splitter-4k-60hz-ir-remote","title":"AV:Link 2x4 HDMI Matrix Switch Splitter 4K@60Hz - IR Remote","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 2x4 HDMI matrix switch splitter routes two HDMI source devices to four display outputs simultaneously, with user-selectable source switching via IR remote. The unit supports HDMI 2.0a with resolutions up to 3840 x 2160 at 60Hz, 600MHz bandwidth, and 6Gbps data rate, handling 4K content from modern set-top boxes, media players, gaming consoles and presentation sources.\u003c\/p\u003e\n\u003cp\u003eDesigned for hospitality venues, sports bars, retail displays, conference rooms and multi-screen entertainment setups, the matrix switch allows a single source to be distributed to all four outputs, or allows quick switching between two sources across all displays. Gold-plated HDMI connectors minimise signal degradation. The unit supports cable runs up to 20m combined input\/output at 1080p or 10m combined at 4K without requiring signal boosters or repeaters.\u003c\/p\u003e\n\u003cp\u003eAudio extraction is provided via digital SPDIF (optical) and analogue 3.5mm jack outputs, allowing the audio signal from the selected HDMI source to be routed to a separate sound system or PA while video continues to the displays. The unit supports DTS-HD, Dolby TrueHD, DTS, Dolby AC3 and DSD audio formats, and handles 8-bit, 10-bit and 12-bit deep colour signals. The compact 200 x 70 x 25mm black metal housing sits on a desk or rack shelf, powered by the included UK mains adaptor (500mA max draw). The IR remote uses a CR2025 battery (supplied) and provides line-of-sight source switching without needing to access the unit directly.\u003c\/p\u003e\n\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 x 2160 @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay colours\u003c\/td\u003e\n\u003ctd\u003e8\/10\/12bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP version\u003c\/td\u003e\n\u003ctd\u003e1.4 (input only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD, Dolby True, DTS, Dolby-AC3 and DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e600MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e6Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission distance\u003c\/td\u003e\n\u003ctd\u003e20m max HD or 10m max 4K (20m input\/output @ 1080p and 10m input\/output @ 4K)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e500mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-15°C ~ +55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery : remote\u003c\/td\u003e\n\u003ctd\u003eCR2025 (supplied)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e200mm x 70mm x 25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.30KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128835UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between a switch and a splitter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis unit combines both functions. It switches between two HDMI input sources and splits the selected source to four output displays simultaneously. All four outputs show the same source at any given time. You cannot send different sources to different outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable length is supported at 4K resolution?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unit supports a combined 10m cable run (input plus output) at 4K resolutions up to 3840 x 2160 at 60Hz. For example, a 5m input cable and a 5m output cable, or a 3m input and 7m output. At 1080p HD the combined run can be up to 20m per output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support HDCP copy protection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The unit supports HDCP 1.4 on the input side, allowing it to pass protected content from Blu-ray players, streaming devices and set-top boxes to displays. Both source and displays must be HDCP-compliant for protected content to display.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's in the box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe package includes the 2x4 matrix switch unit, IR remote control with CR2025 battery fitted, UK mains power adaptor, and product manual. HDMI cables are not included and must be purchased separately.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313143963915,"sku":"128.835UK","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128835UK_0.jpg?v=1784889979"},{"product_id":"av-link-4k-hdmi-extender-over-ethernet-kit-100m","title":"AV:Link 4K HDMI Extender Over Ethernet Kit - 100m","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 4K HDMI extender kit transmits HDMI signals up to 100m over a single Cat5e or Cat6 Ethernet cable, replacing bulky HDMI cable runs with standard network cabling. The kit consists of a transmitter unit (TX) and a receiver unit (RX), each measuring 82x45x18mm, with the transmitter connecting to the HDMI source and the receiver connecting to the display or projector. Video resolution supports up to 3840x2160 at 30Hz (4K UHD) using HDMI 1.4a protocol, with HDCP 2.2 compliance for protected content.\u003c\/p\u003e\n\u003cp\u003eDesigned for home cinema, digital signage and commercial AV installations where the source and display are separated by long cable runs, the extender eliminates the signal degradation and cost of 100m HDMI cable. The IR-TX and R\/L ports on the units allow bi-directional infrared control, so a remote control at the display end can operate the source device at the transmitter end without line-of-sight. The 3.5mm stereo output on the receiver extracts audio from the HDMI signal for connection to headphones, powered speakers or an external amplifier, independent of the HDMI output to the display.\u003c\/p\u003e\n\u003cp\u003eBoth units feature ventilation slots on the top surface to dissipate heat during operation, and each is powered by a dedicated 5Vdc 1A power supply (included). The gold-plated HDMI connectors reduce contact oxidation over time, and the units ship with rack-mounting brackets for installation in AV racks or under-desk mounting. The extender supports DTS-HD, Dolby TrueHD, DTS, Dolby AC3 and DSD audio formats, with a maximum bandwidth of 340MHz and baud rate of 3x3.4Gbps. Cat5e or Cat6 shielded twisted pair (STP\/FTP) cable is required for the link and is not supplied with the kit.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI version\u003c\/td\u003e\n\u003ctd\u003e1.4a\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. range\u003c\/td\u003e\n\u003ctd\u003e100m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo format\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 x 2160 @ 30Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eSupports DTS-HD\/Dolby-trueHD\/DTS\/Dolby-AC3\/DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. cable length\u003c\/td\u003e\n\u003ctd\u003eHDMI (input \u0026amp; output) ≤15m AWG26 standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e340MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e3x3.4Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e350mA (TX) and 200mA (RX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e5Vdc, 1000mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e82mm x 45mm x 18mm (each unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.12KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128839UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable type is required for the 100m connection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe extender requires Cat5e or Cat6 shielded twisted pair (STP or FTP) cable between the transmitter and receiver units. Unshielded cable (UTP) is not recommended as it may cause signal interference over long runs. The cable is not included with the kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the IR remote control work in both directions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IR-TX and R\/L ports support bi-directional infrared control, allowing a remote at the display end to control the source device at the transmitter end, or vice versa. IR emitter and receiver cables are required and may be sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I extract audio while still sending HDMI to the display?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 3.5mm stereo output on the receiver unit extracts audio from the HDMI signal simultaneously with the HDMI output to the display. This allows connection to headphones, powered speakers or an external amplifier without interrupting the video signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum resolution supported?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe extender supports resolutions up to 3840x2160 (4K UHD) at 30Hz using HDMI 1.4a. It is HDCP 2.2 compliant for protected content. Higher refresh rates such as 4K at 60Hz are not supported by this model.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313144127755,"sku":"128.839UK","price":58.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128839UK_0.jpg?v=1784890009"},{"product_id":"av-link-hdmi-2-0-4k-splitter-1-input-2-outputs","title":"AV:Link HDMI 2.0 4K Splitter 1 Input 2 Outputs","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link HDMI 2.0 splitter takes one HDMI input and duplicates it to two HDMI outputs simultaneously, maintaining 4K resolution at 3840 x 2160 60Hz on both displays. The unit supports HDMI 2.0b, HDCP 2.2 copy protection, 18Gbps bandwidth, and passes through multi-channel audio formats including DTS-HD, Dolby TrueHD, DTS, Dolby AC3 and DSD without downmixing.\u003c\/p\u003e\n\u003cp\u003eDesigned for home cinema setups where a single source feeds two TVs in different rooms, digital signage installations requiring identical content on twin screens, and gaming setups where console output needs to reach both a recording display and a viewing display, the splitter requires no switching or configuration once connected. Plug in the source to the input port, connect both displays to the output ports, and apply power via the included UK DC 5V adaptor. The metal housing dissipates heat efficiently and the compact 128 x 53 x 23.5mm footprint fits behind wall-mounted displays or inside AV cabinets.\u003c\/p\u003e\n\u003cp\u003eThe gold-plated HDMI connectors reduce signal degradation over repeated plugging cycles and the unit handles 8-bit, 10-bit and 12-bit deep colour for HDR content pass-through where both the source and displays support it. Maximum transmission distance is 10m at 4K 60Hz or 35m at 4K 30Hz and Full HD, measured from source to splitter to display using standard HDMI cables. Operating temperature range is -15°C to +55°C, allowing use in unheated commercial environments.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.14KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e128mm x 53mm x 23.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eInput: AC (50Hz, 60Hz) 100-240V, Output: DC5V\/1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e450mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e18Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connections\u003c\/td\u003e\n\u003ctd\u003e2x HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 x 2160 @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay colours\u003c\/td\u003e\n\u003ctd\u003e8\/10\/12bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD, Dolby True, DTS, Dolby-AC3 and DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP version\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e600MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission distance\u003c\/td\u003e\n\u003ctd\u003e35m max 4K @ 30Hz and FHD or 10m max 4K @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-15°C to +55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128845UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan both displays show different content?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The splitter duplicates the same signal to both outputs simultaneously. Both displays show identical content at the same resolution and refresh rate. For independent content on each display, you need an HDMI matrix switcher rather than a splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with 4K at 60Hz on both outputs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, provided the HDMI cable run from splitter to each display is 10m or less. Longer cable runs may require reducing to 4K 30Hz or Full HD 60Hz depending on cable quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support HDR content?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unit supports 8-bit, 10-bit and 12-bit deep colour pass-through, which is required for HDR10 content. Both the source device and both displays must also support HDR for the full chain to work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's in the box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe splitter unit, a UK DC 5V 1A power adaptor, and a product manual. HDMI cables are sold separately.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313144619275,"sku":"128.845UK","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128845UK_0.jpg?v=1784890028"},{"product_id":"av-link-hdmi-2-0-4k-splitter-1-in-4-out-3840x2160-60hz","title":"AV:Link HDMI 2.0 4K Splitter 1 In 4 Out - 3840x2160 @ 60Hz","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link HDMI 2.0 splitter distributes one HDMI source to four displays simultaneously, supporting resolutions up to 3840 x 2160 @ 60Hz with HDCP 2.2 copy protection. The unit accepts a single HDMI input and replicates the signal across four HDMI outputs, allowing identical content to be shown on multiple screens without quality degradation.\u003c\/p\u003e\n\u003cp\u003eDesigned for retail digital signage, hospitality installations, home cinema multi-room setups and conference room AV, the splitter handles 4K UHD content from set-top boxes, media players, gaming consoles and laptops. The metal chassis measures 178 x 67 x 23mm and weighs 230g, making it compact enough to fit behind displays or in AV racks. Gold-plated HDMI connectors on all five ports (one input, four outputs) reduce contact resistance and maintain signal integrity across the 600MHz bandwidth.\u003c\/p\u003e\n\u003cp\u003eAudio passthrough includes DTS-HD, Dolby TrueHD, DTS, Dolby-AC3 and DSD formats, preserving multi-channel audio from Blu-ray players and streaming devices. The splitter supports 8-bit, 10-bit and 12-bit deep colour, allowing HDR content to pass through to compatible displays. Maximum transmission distance varies by resolution: 35m for 4K @ 30Hz and Full HD content, or 10m for 4K @ 60Hz over standard HDMI cables. The unit operates on 100-240V AC mains via the included UK power adaptor (DC 5V\/1A output, 650mA max current draw).\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.23KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e178mm x 67mm x 23mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eInput: AC (50Hz, 60Hz) 100-240V, Output: DC5V\/1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e650mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e6Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connections\u003c\/td\u003e\n\u003ctd\u003e4x HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 x 2160 @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay colours\u003c\/td\u003e\n\u003ctd\u003e8\/10\/12bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD, Dolby True, DTS, Dolby-AC3 and DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP version\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e600MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission distance\u003c\/td\u003e\n\u003ctd\u003e35m max 4K @ 30Hz and FHD or 10m max 4K @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-15°C to +55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128846UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this support 4K @ 60Hz on all four outputs simultaneously?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The splitter supports 3840 x 2160 @ 60Hz across all four outputs at the same time, provided the source device and all connected displays are 4K-capable and the HDMI cables used are rated for 18Gbps bandwidth (HDMI 2.0 standard).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum cable length between the splitter and displays?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor 4K @ 60Hz content, use HDMI cables no longer than 10m between the splitter and each display. For 4K @ 30Hz or Full HD (1080p) content, cables up to 35m can be used without significant signal degradation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs HDCP 2.2 required for the source and displays?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The splitter is HDCP 2.2 compliant, which means both the source device (Blu-ray player, streaming box, console) and all connected displays must support HDCP 2.2 to view protected 4K content such as Ultra HD Blu-ray discs or 4K streaming services.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I power this from a USB port instead of mains?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The splitter requires DC 5V\/1A and draws up to 650mA under full load, which exceeds the current capacity of standard USB 2.0 ports (500mA max). Use the included UK mains adaptor or a regulated DC 5V\/1A+ power supply with a compatible connector.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313144717579,"sku":"128.846UK","price":29.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128846UK_0.jpg?v=1784890047"},{"product_id":"av-link-hdmi-2-0-1x8-splitter-4k-60hz-distribution","title":"AV:Link HDMI 2.0 1x8 Splitter - 4K 60Hz Distribution","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link HDMI 2.0 1x8 splitter takes a single HDMI source and distributes the signal to eight separate displays simultaneously, maintaining resolution up to 4K Ultra HD at 3840 x 2160 @ 60Hz. The unit supports HDCP 2.2 copy protection, 8\/10\/12-bit deep colour, and a maximum bandwidth of 600MHz across all eight outputs. Gold-plated HDMI connectors reduce signal degradation, and the metal chassis provides passive heat dissipation during continuous operation.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial and residential installations where one source needs to feed multiple screens. Retail video walls, sports bars, digital signage networks, exhibition stands, or multi-room home cinema. The splitter handles modern 4K sources including set-top boxes, Blu-ray players, media servers and games consoles. Each of the eight outputs delivers an identical feed, so all connected displays show the same content at the same time. The unit passes through multi-channel audio formats including DTS-HD, Dolby TrueHD, DTS, Dolby AC3 and DSD, preserving surround sound to compatible receivers.\u003c\/p\u003e\n\u003cp\u003eThe 276 x 136 x 24mm metal housing is designed for rack mounting or surface installation in AV racks, behind reception desks, or in equipment cupboards. At 660g the unit has sufficient weight to sit securely on a shelf without additional fixing. Maximum transmission distance is 10m per cable run at 4K 60Hz, or up to 35m at 4K 30Hz or Full HD, depending on cable quality. The included UK mains adaptor provides DC 5V at 2A with a maximum working current of 1600mA, and the operating temperature range of -15°C to +55°C suits both climate-controlled and unheated commercial environments.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.66KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e276mm x 136mm x 24mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eInput: AC (50Hz, 60Hz) 100-240V, Output: DC5V\/2A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e1600mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e6Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connections\u003c\/td\u003e\n\u003ctd\u003e8x HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 3840 x 2160 @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay colours\u003c\/td\u003e\n\u003ctd\u003e8\/10\/12bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD, Dolby True, DTS, Dolby-AC3 and DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP version\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e600MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission distance\u003c\/td\u003e\n\u003ctd\u003e35m max 4K @ 30Hz and FHD or 10m max 4K @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-15°C to +55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128847UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum cable length per output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 4K 60Hz the maximum recommended cable run is 10m per output. At 4K 30Hz or Full HD 1080p the maximum extends to 35m. These figures assume good-quality HDMI cables with adequate shielding. Lower-quality cables may reduce the effective distance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo all eight outputs need to be connected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The splitter works with any number of outputs connected from one to eight. Unused outputs can be left unconnected without affecting the signal quality to the active displays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it pass audio to all displays?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The splitter passes multi-channel audio formats including DTS-HD, Dolby TrueHD, DTS, Dolby AC3 and DSD to all connected displays. Each display receives the same audio stream embedded in the HDMI signal. For separate audio extraction you would need an additional HDMI audio de-embedder on the source side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the splitter HDCP 2.2 compliant?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The unit supports HDCP 2.2, which is required for 4K content from Netflix, Amazon Prime Video, UHD Blu-ray players and similar protected sources. All connected displays must also support HDCP 2.2 for protected 4K content to display correctly.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313144783115,"sku":"128.847UK","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128847UK_0.jpg?v=1784890064"},{"product_id":"av-link-4k-hdmi-2-0-matrix-4-x-2","title":"AV:Link 4K HDMI 2.0 Matrix 4 x 2","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 4x2 HDMI 2.0 matrix switch routes any of four HDMI source devices to either of two display outputs, supporting resolutions up to 3840 × 2160 @ 60Hz with HDCP 2.2 copy protection. The unit handles HDMI v2.0b signal bandwidth at 600MHz and 18Gbps combined data rate, passing 8-bit, 10-bit and 12-bit deep colour video alongside DTS-HD, Dolby TrueHD, Dolby-AC3 and DSD audio formats.\u003c\/p\u003e\n\u003cp\u003eDesigned for AV installations in hospitality, retail showrooms, conference rooms and home cinema setups where multiple sources need to be distributed across two displays without re-cabling. The matrix can display different sources on each output simultaneously, or send the same source to both outputs. Control switching via the included IR remote or front-panel buttons. Maximum cable runs are 30m per input\/output at 4K@30Hz and Full HD, or 10m per input\/output at 4K@60Hz using quality HDMI cables.\u003c\/p\u003e\n\u003cp\u003eGold-plated HDMI connectors reduce signal degradation on long cable runs. Smart EDID management reads display capabilities and optimises the output signal for each connected screen. Two SPDIF optical outputs and two 3.5mm stereo outputs allow simultaneous audio breakout to an external sound system, powered speakers or headphones without interrupting the HDMI audio path. The metal enclosure measures 99 × 70 × 27mm and draws 600mA maximum from the supplied 5V DC adaptor.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. resolution\u003c\/td\u003e\n\u003ctd\u003e3840 x 2160 @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay colours\u003c\/td\u003e\n\u003ctd\u003e8\/10\/12bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP version\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD, Dolby True, DTS, Dolby-AC3 and DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connections\u003c\/td\u003e\n\u003ctd\u003e4x HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connections\u003c\/td\u003e\n\u003ctd\u003e2x HDMI, 2x Optical (Toslink), 2x 3.5mm Stereo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. bandwidth\u003c\/td\u003e\n\u003ctd\u003e600MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e3 x 6Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission distance\u003c\/td\u003e\n\u003ctd\u003e30m max 4K @ 30Hz and FHD or 10m max 4K @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e600mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-15°C to +55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery : remote\u003c\/td\u003e\n\u003ctd\u003e2x AAA (not supplied)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower adaptor\u003c\/td\u003e\n\u003ctd\u003eInput: AC (50Hz, 60Hz) 100-240V, Output: DC5V\/1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e99mm x 70mm x 27mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.30KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128849UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan I display different sources on each output at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The matrix allows independent source selection for each of the two outputs, so you can display HDMI input 1 on output 1 and HDMI input 3 on output 2 simultaneously, or send the same source to both outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable length can I use at 4K@60Hz?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe matrix supports up to 10m HDMI cable per input and per output when running 4K@60Hz signals. Longer runs up to 30m are supported at 4K@30Hz or Full HD resolutions. Use high-quality certified HDMI cables for best results at maximum distances.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it pass audio through HDMI or only via the breakout outputs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAudio passes through the HDMI outputs to the connected displays as normal. The SPDIF optical and 3.5mm stereo outputs provide simultaneous audio breakout, allowing you to send audio to external speakers or a sound system without affecting the HDMI audio path.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's in the box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unit ships with an IR remote control (batteries not included, requires 2x AAA), a UK mains power adaptor, and the product manual. HDMI cables are not included.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313144848651,"sku":"128.849UK","price":60.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128849UK_0.jpg?v=1784890085"},{"product_id":"av-link-4k-hdmi-2-0-matrix-4x4-switch-with-audio-extraction","title":"AV:Link 4K HDMI 2.0 Matrix 4x4 Switch with Audio Extraction","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link 4x4 HDMI 2.0 matrix switch routes any of four HDMI sources to any of four HDMI displays, with independent source selection per output. The unit supports HDMI 2.0b signals up to 4K@60Hz (3840×2160) with HDCP 2.2 protection and an 18Gbps data rate, making it compatible with 4K streaming devices, Blu-ray players, gaming consoles and satellite receivers. Audio can be extracted from HDMI output 1 via an optical SPDIF port and a 3.5mm stereo jack, allowing simultaneous output to a soundbar or amplifier alongside the video display.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial installations in hospitality, sports bars, retail showrooms and conference facilities, the matrix allows independent control of each output via front panel buttons, IR remote, or RS232 serial connection. The RS232 port enables integration with larger AV control systems from a connected PC or control processor. EDID management switches on the front panel allow specific video resolution and audio format settings to be locked per input, preventing handshake issues with displays that support different capabilities.\u003c\/p\u003e\n\u003cp\u003eThe metal chassis measures 276×143×26mm and weighs 720g, suitable for rack mounting or placement on an equipment shelf. Gold-plated HDMI connectors reduce signal degradation over cable runs up to 30m combined length (input + output) at 4K@30Hz and Full HD resolutions, or 10m combined at 4K@60Hz. The unit supports multi-channel audio formats including DTS-HD, Dolby TrueHD, LPCM 7.1, DTS, Dolby AC3 and DSD. A 12V DC power supply with UK plug and an IR remote are included.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. resolution\u003c\/td\u003e\n\u003ctd\u003e3840 x 2160 @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay colours\u003c\/td\u003e\n\u003ctd\u003e8\/10\/12bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDCP version\u003c\/td\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio format\u003c\/td\u003e\n\u003ctd\u003eDTS-HD\/Dolby-trueHD\/LPCM7.1\/DTS\/Dolby-AC3\/DSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connections\u003c\/td\u003e\n\u003ctd\u003e4x HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connections\u003c\/td\u003e\n\u003ctd\u003e4x HDMI, Optical (Toslink), 3.5mm Stereo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e18Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission distance\u003c\/td\u003e\n\u003ctd\u003e30m max 4K @ 30Hz and FHD or 10m max 4K @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working current\u003c\/td\u003e\n\u003ctd\u003e800mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003e-15°C to +55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery : remote\u003c\/td\u003e\n\u003ctd\u003e2x AAA (not supplied)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower adaptor\u003c\/td\u003e\n\u003ctd\u003eInput: AC (50Hz, 60Hz) 100-240V, Output: DC12V\/1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e276mm x 143mm x 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.72KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128850UK.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan each display show a different source at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 4x4 matrix allows independent source selection for each of the four outputs. Output 1 can show HDMI input 3 while output 2 shows input 1, and so on. Each output is controlled separately via the front panel, IR remote or RS232 commands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable length is supported at 4K@60Hz?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor 4K@60Hz signals the combined input and output cable length should not exceed 10m per channel. For 4K@30Hz and Full HD (1080p) the combined length can extend to 30m. Use certified high-speed HDMI cables rated for 18Gbps to maintain signal integrity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the audio extraction work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe optical SPDIF and 3.5mm stereo jack outputs carry the audio signal from HDMI output 1 only. This allows the audio from the first display to be sent simultaneously to a soundbar, amplifier or headphones while the video displays on the connected screen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is EDID management used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEDID switches on the front panel allow you to lock specific resolution and audio format settings per input. This prevents handshake problems when displays connected to the outputs support different capabilities, ensuring each source outputs a consistent signal type compatible with all connected screens.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313145078027,"sku":"128.850UK","price":118.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128850UK_0.jpg?v=1784890110"},{"product_id":"rj11-6p4c-inline-coupler-socket-to-socket","title":"RJ11 6P4C Inline Coupler Socket to Socket","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link RJ11 6P4C inline coupler joins two RJ11 modular cables using back-to-back female sockets at both ends. The 6P4C configuration (6-position, 4-conductor) carries four active wires through the coupler, making it compatible with standard telephone handset cables, modem cables and basic data connections that use the RJ11 form factor.\u003c\/p\u003e\n\u003cp\u003eDesigned for extending telephone lines, fax connections and legacy modem setups where the existing cable run is too short to reach the wall socket or device, the coupler provides a direct pass-through connection without signal loss. The compact housing sits inline with the cable run and does not require external power or additional wiring. It can be used in residential telephone installations, small office environments and retail point-of-sale systems where landline connectivity is still in use.\u003c\/p\u003e\n\u003cp\u003eThe moulded plastic housing protects the internal conductors and provides strain relief at both socket ends, preventing damage from repeated plugging and unplugging. The coupler accepts standard RJ11 6P4C plugs with the retaining clip facing upwards, and the sockets provide a positive click when a cable is fully seated. Supplied in a sealed retail bag.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eModular (RJ)\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between 6P4C and 6P6C?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e6P4C means six positions but only four conductors are wired (typically the centre four pins). 6P6C wires all six positions. This coupler is 6P4C, so it works with standard telephone handset cables and basic RJ11 connections but will not pass signals on the outer two positions if you plug in a fully-wired 6P6C cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for Ethernet?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Ethernet uses RJ45 8P8C connectors with eight conductors. RJ11 has a smaller plug body and fewer conductors. This coupler is for telephone and legacy modem connections only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with all RJ11 cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt works with any cable that has a standard RJ11 6P4C or 6P6C plug. If the cable uses only the centre four conductors (most telephone cables do), the connection will pass through correctly. If the cable requires all six positions to be active, only the centre four will carry signal.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313398440203,"sku":"283.009UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/283009UK_0.jpg?v=1784896138"},{"product_id":"av-link-usb-c-to-rj45-gigabit-ethernet-adaptor-aluminium","title":"AV:Link USB-C to RJ45 Gigabit Ethernet Adaptor - Aluminium","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link USB-C to RJ45 Gigabit Ethernet adaptor adds a wired network port to laptops, tablets and desktops with USB-C connectivity. The adaptor connects via a 120mm fixed cable with a USB 3.0 Type-C plug on one end and a full-sized RJ45 Ethernet socket on the other, supporting data transfer rates up to 1000Mbps on Gigabit-capable networks.\u003c\/p\u003e\n\u003cp\u003eDesigned for portable use with thin laptops and tablets that lack built-in Ethernet ports, the adaptor provides an alternative to WiFi when working in environments where wired connections are required or preferred for security, stability or bandwidth. The plug-and-play installation works without drivers on Windows, macOS and most Linux distributions, recognising the adaptor as a standard network interface once connected.\u003c\/p\u003e\n\u003cp\u003eThe adaptor body is machined from aluminium with a brushed grey finish, measuring 91mm long and weighing 28g including the attached cable. The compact size suits laptop bags and cable organisers without adding bulk. The RJ45 port accepts standard Ethernet cables with RJ45 plugs and auto-negotiates connection speed between 10Mbps, 100Mbps and 1000Mbps depending on the network infrastructure and cable quality.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eUSB3.0 Type-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eRJ45 Gigabit Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData transfer rate\u003c\/td\u003e\n\u003ctd\u003e10\/100\/1000Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003e120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e25mm x 91mm x 257mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require drivers or software installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adaptor uses plug-and-play installation on Windows 10\/11, macOS and most Linux distributions. The operating system recognises it as a standard network interface without needing separate driver downloads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat network speeds does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor supports Gigabit Ethernet at 10Mbps, 100Mbps and 1000Mbps. The actual speed depends on the network infrastructure, router capability and Ethernet cable quality. The adaptor auto-negotiates to the highest speed the network supports.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with USB-C ports on all devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor works with USB-C ports that support USB 3.0 data transfer. Some USB-C ports on older devices or charging-only cables may not provide data connectivity. Check that the USB-C port is rated for data before connecting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used while the device is charging?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, if the device has multiple USB-C ports or supports simultaneous charging and data transfer through a single port. The adaptor itself does not pass through power delivery, so a separate charging cable is needed if the device has only one USB-C port.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313445757195,"sku":"500.104UK","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/500104UK_0.jpg?v=1784898474"},{"product_id":"av-link-rca-socket-to-rca-socket-coupler-adaptor","title":"AV:Link RCA Socket to RCA Socket Coupler Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link RCA socket to RCA socket coupler is a back-to-back inline adaptor with female RCA phono sockets at both ends, allowing two male-terminated RCA cables to be joined together to extend cable runs. The centre pin and outer shield maintain full contact through the adaptor body, preserving signal integrity for composite video and unbalanced audio connections.\u003c\/p\u003e\n\u003cp\u003eCommonly used when an existing RCA cable is too short to reach between a DVD player and TV, between a games console and AV receiver, or when extending turntable audio cables in a hi-fi setup. The coupler works equally well for composite video (yellow RCA), stereo audio (red\/white RCA), or mono audio connections. The compact barrel design sits inline without adding bulk to the cable run.\u003c\/p\u003e\n\u003cp\u003eThe outer body is moulded black plastic with polished metal RCA sockets at each end. The sockets grip standard RCA plugs firmly enough to prevent accidental disconnection but release cleanly when pulled. Because the adaptor is passive (no internal circuitry), it introduces no signal loss beyond the marginal resistance of the additional contact points, making it suitable for runs up to several metres without degradation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRCA (Phono)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work for both audio and video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The coupler is electrically identical for composite video (typically yellow RCA cables) and unbalanced audio (red\/white RCA). It carries the signal between the two cable sections without filtering or modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it degrade the signal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor is passive and introduces only the marginal resistance of the additional contact points. For typical home AV runs (under 5-10m total cable length after joining), signal degradation is negligible. Very long runs or professional-grade installations may benefit from direct cabling without intermediate adaptors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for subwoofer connections?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Subwoofer LFE connections typically use RCA cables, so this adaptor will extend a subwoofer cable run if needed. The low-frequency signals carried by subwoofer connections are not affected by the inline join.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313477640459,"sku":"761.260UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/761260UK_0.jpg?v=1784899279"},{"product_id":"av-link-coaxial-female-to-female-coupler","title":"AV:Link Coaxial Female to Female Coupler","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link coaxial coupler is a back-to-back adapter with female coaxial F-type threaded sockets at both ends, designed to join two coaxial leads together. The coupler uses a nickel-plated brass barrel to maintain signal integrity across the join, preventing degradation when extending aerial cables or repositioning TV and FM radio connections.\u003c\/p\u003e\n\u003cp\u003eCommon applications include extending aerial runs between wall plates and TV tuners, joining short coaxial leads into a longer run during temporary installations, and connecting coaxial cables where a direct wall-to-device run is not possible. The threaded F-type sockets ensure a secure mechanical connection that resists loosening under normal handling and cable weight. The coupler works with standard 75-ohm coaxial cables carrying Freeview, satellite, and FM radio signals.\u003c\/p\u003e\n\u003cp\u003eThe compact barrel design minimises the footprint behind wall-mounted TVs and inside AV cabinets. The nickel plating on the brass body provides corrosion resistance and consistent conductivity over time, maintaining the shielding needed to prevent interference on terrestrial and satellite TV signals. The coupler is passive. It does not amplify or attenuate signals, so it suits runs where cable length and signal strength are already within acceptable tolerances.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoaxial (Aerial)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable type does this work with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe coupler accepts standard F-type threaded coaxial plugs, which are used on most modern TV aerial and satellite cables in UK installations. It does not work with older push-fit Belling-Lee (IEC) coaxial connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it affect signal quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe coupler is passive and does not amplify or filter the signal. A well-made join will have minimal signal loss, but any join in a coaxial run introduces a small amount of insertion loss. If you are already close to the minimum signal threshold for reliable reception, adding a coupler may degrade performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for satellite as well as terrestrial TV?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The coupler supports both terrestrial Freeview signals and satellite signals (Sky, Freesat) on 75-ohm coaxial cables with F-type connectors.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313480425739,"sku":"766.299UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/766299UK_0.jpg?v=1784899616"},{"product_id":"av-link-f-connector-twist-on-for-rg58-5mm-cable","title":"AV:Link F Connector Twist-On for RG58 5mm Cable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link F connector is a twist-on termination for RG58 coaxial cable with a 5mm outer diameter. The connector threads onto the prepared cable end without requiring crimping tools, compression fittings or soldering, making it suitable for field installations and repairs where specialist tools are not available.\u003c\/p\u003e\n\u003cp\u003eDesigned for satellite TV, aerial and RF signal distribution systems, the connector accepts the 5mm diameter RG58 cable commonly used in dual satellite LNB installations and domestic aerial runs. The twist-on mechanism grips the cable braid and seats the centre conductor in the pin, forming both the shield connection and the signal path. Once threaded on, the connector forms an F-type male termination compatible with standard F-type sockets on satellite receivers, distribution amplifiers and wall plates.\u003c\/p\u003e\n\u003cp\u003eThe connector body is formed from nickel-plated metal with a threaded collar that engages the F-type socket. AV:Link specifies compatibility with their 808.107UK, 808.109UK and 808.163UK dual satellite cables, all of which share the 5mm RG58 construction. The twist-on design allows the connector to be removed and refitted if the cable needs to be re-terminated or re-routed during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eF Type (Cable \u0026amp; Satellite)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this require any special tools to fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connector threads onto the prepared cable end by hand. You will need a cable stripper or sharp knife to prepare the RG58 cable (strip back the outer jacket, fold back the braid, strip the dielectric to expose the centre conductor), but no crimping or compression tools are needed to attach the connector itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable diameter does it fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is sized for RG58 coaxial cable with a 5mm outer diameter. It will not fit larger cables such as RG6 (6.15mm) or smaller cables such as RG174 (2.8mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be reused if I need to re-terminate the cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The twist-on mechanism allows the connector to be unscrewed from the cable and refitted, provided the cable end has not been damaged during removal. This makes it suitable for installations where cables may need to be re-routed or adjusted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it weatherproof for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is not specified as weatherproof. For outdoor or exposed installations, the F-type connection should be housed inside a weatherproof enclosure or sealed with self-amalgamating tape and heat-shrink to prevent moisture ingress.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313481474315,"sku":"770.150UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/770150UK_0.jpg?v=1784899663"},{"product_id":"f-female-to-f-female-coupler-inline-rf-connector","title":"F Female to F Female Coupler - Inline RF Connector","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis F female to F female coupler joins two F-type coaxial cables inline, providing a back-to-back connection between two male F plugs. The zinc alloy barrel is threaded at both ends to accept standard F connectors, commonly used on satellite dish downleads, TV aerial extensions, cable TV installations and RF distribution systems.\u003c\/p\u003e\n\u003cp\u003eDesigned for extending coaxial cable runs where a single cable length is insufficient, the coupler maintains signal integrity across the join by keeping the centre conductor and shield connections continuous. The coupler can be used freestanding for temporary connections or mounted to a panel, wallplate or patch panel using the included locking nut and washer.\u003c\/p\u003e\n\u003cp\u003eThe threaded F-type interface provides a more secure connection than push-fit alternatives and is less prone to working loose over time, particularly on vertical runs or in environments subject to vibration. The zinc alloy construction resists corrosion in indoor installations and provides adequate shielding for domestic RF signal frequencies up to 2.4 GHz.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eF Type (Cable \u0026amp; Satellite)\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cables does this coupler work with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe coupler accepts any coaxial cable fitted with a male F connector. This includes satellite dish downleads (typically RG6 or CT100), TV aerial extensions and cable TV installations. Both ends must have F-type male connectors already fitted to the cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe zinc alloy body is suitable for indoor use. For outdoor installations, particularly exposed locations, consider using a weatherproof junction box to house the coupler and protect the connection from moisture ingress.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it mounted to a panel?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe coupler includes a locking nut and washer. Drill a clearance hole sized for the barrel thread (typically 9-10mm), pass the coupler through from one side, then fit the washer and locking nut from the opposite side and tighten by hand or with a spanner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it degrade signal quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAny inline connection introduces a small amount of signal loss, typically 0.1-0.3 dB at satellite and terrestrial TV frequencies. For most domestic installations this is negligible and will not affect picture quality, but avoid using multiple couplers in series on long cable runs where cumulative loss becomes significant.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313481605387,"sku":"770.751UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/770751UK_0.jpg?v=1784899692"},{"product_id":"av-link-bnc-plug-to-rca-socket-adapter","title":"AV:Link BNC Plug to RCA Socket Adapter","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link BNC to RCA adapter converts a BNC plug connection to an RCA phono socket, allowing professional composite video equipment with BNC outputs to connect to domestic AV systems that use RCA phono inputs. The adapter is a passive barrel connector with a BNC plug on one end and an RCA socket on the other, requiring no power or active conversion.\u003c\/p\u003e\n\u003cp\u003eDesigned for CCTV monitors, broadcast equipment, test instruments and professional video switchers that output composite video via BNC, the adapter bridges the connection to domestic televisions, DVD recorders, VCRs and consumer-grade capture devices that accept RCA phono composite inputs. The adapter also works in reverse, allowing an RCA cable to connect to equipment with BNC sockets, though this is a less common use case.\u003c\/p\u003e\n\u003cp\u003eThe metal barrel is nickel-plated for corrosion resistance and to maintain signal integrity across the connection. The BNC plug features the standard bayonet lock mechanism, twisting onto BNC sockets with a quarter-turn to secure the connection. The RCA socket accepts standard RCA phono plugs and grips via friction fit. No tools are required for connection or removal.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRCA (Phono)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this adapter convert the signal quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The adapter is a passive connector that simply changes the physical connection type from BNC to RCA. The signal remains composite video at the same resolution and quality as the source equipment provides. There is no upscaling or format conversion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used for audio connections?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, though it is primarily designed for composite video. BNC and RCA connectors can both carry analogue audio signals, so the adapter will work for connecting professional audio equipment with BNC outputs to consumer equipment with RCA inputs, or vice versa.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the connection secure enough for permanent installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe BNC side locks with a bayonet twist, providing a secure connection suitable for permanent or semi-permanent installation. The RCA side relies on friction fit, which is less secure than BNC but adequate for most fixed installations where the cable is not subject to movement or tension.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in both directions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. You can use it to connect a BNC cable to equipment with an RCA socket, or to connect an RCA cable to equipment with a BNC socket, depending on which end you attach to which piece of equipment.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313481670923,"sku":"773.498UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/773498UK_0.jpg?v=1784899709"},{"product_id":"av-link-f-plug-to-coax-tv-plug-adaptor","title":"AV:Link F Plug to Coax TV Plug Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link F plug to coax TV plug adaptor converts a satellite F connector into a standard coaxial TV plug, allowing satellite equipment to connect to aerial sockets designed for standard coax fittings. The adaptor features a female F socket on one end and a male coaxial TV plug on the other, with a nickel-plated brass body and knurled grip section for hand-tightening.\u003c\/p\u003e\n\u003cp\u003eDesigned for domestic satellite installations where the existing wall socket or extension cable uses a coax TV socket rather than an F connector, the adaptor suits set-top boxes, satellite receivers and distribution amplifiers. The brass construction maintains signal integrity across the connection and resists corrosion in indoor installations. The knurled section provides grip when connecting or disconnecting by hand, removing the need for tools in typical residential use.\u003c\/p\u003e\n\u003cp\u003eThe nickel plating over the brass body gives a silver-chrome finish that matches most satellite and AV equipment housings. The adaptor adds approximately 35mm to the overall connection length once fitted, which should be factored into tight installation spaces behind wall-mounted TVs or in shallow AV cabinets. Signal loss across the adaptor is minimal for typical domestic satellite frequencies between 950MHz and 2150MHz.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoaxial (Aerial)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connectors does this adaptor convert between?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne end is a female F socket (the type used on satellite equipment and coax cable), the other end is a male coaxial TV plug (the type that pushes into a standard UK TV aerial socket).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with Freesat and Sky boxes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Most satellite receivers output via an F connector, so if your wall socket or extension cable uses a standard coax TV socket, this adaptor allows the connection to be made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it affect signal quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSignal loss across the adaptor is minimal for satellite frequencies (950-2150MHz). The nickel-plated brass construction maintains impedance matching and reduces reflections compared to lower-grade adaptors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much length does it add to the connection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor adds approximately 35mm once the F plug is screwed into the socket and the coax plug is inserted into the wall socket. This should be considered in tight spaces behind TVs or in shallow cabinets.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313481769227,"sku":"775.085UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/775085UK_0.jpg?v=1784899720"},{"product_id":"av-link-coaxial-plug-to-f-socket-adaptor","title":"AV:Link Coaxial Plug to F Socket Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link coaxial plug to F socket adaptor converts a standard coaxial TV plug (male) into an F-type socket (female), allowing satellite and aerial cables with F-type connectors to connect to devices with coaxial sockets. The metal-bodied construction provides RF shielding and maintains signal integrity for both digital and analogue transmissions.\u003c\/p\u003e\n\u003cp\u003eUsed primarily in satellite TV installations, cable distribution systems, and aerial setups where equipment uses mixed connector types, the adaptor allows a coaxial-fitted device to accept an F-type cable without re-terminating. Common applications include connecting satellite receivers, TV amplifiers, and distribution boxes where the input and output connector types don't match. The threaded F socket accepts standard F-type plugs and provides a more secure connection than push-fit coaxial alternatives.\u003c\/p\u003e\n\u003cp\u003eThe compact 30mm length and metal barrel keep the adaptor unobtrusive when fitted behind wall-mounted screens or in equipment racks. The nickel-plated finish resists corrosion in indoor installations and maintains low contact resistance over time. The adaptor is passive, requiring no power and adding no active components into the signal path.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eCoaxial (Aerial)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between coaxial and F-type connectors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCoaxial TV plugs are push-fit connectors used on standard aerial cables in the UK. F-type connectors have a threaded coupling nut and are used on satellite cables and some distribution systems. This adaptor bridges the two, allowing a coaxial plug to connect to equipment fitted with an F socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work with both satellite and aerial signals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The adaptor is passive and suitable for both terrestrial TV signals (aerial) and satellite signals (typically 950-2150 MHz). It adds minimal signal loss when used with properly terminated cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe nickel-plated metal body provides some corrosion resistance, but the adaptor is designed for indoor use. For outdoor installations, use weatherproof F-type connectors and cable glands rated for exterior use.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313481801995,"sku":"775.421UK","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/775421UK_0.jpg?v=1784899731"},{"product_id":"av-link-ad-aud31-3-way-stereo-cd-aux-switch-box","title":"AV:Link AD-AUD31 3-Way Stereo CD\/AUX Switch Box","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link AD-AUD31 lets you connect up to three stereo audio sources to a single amplifier input. You select which source you want to hear using the push buttons on the front of the box, so there is no need to swap cables every time you change from one device to another. It works well with sources such as a DVD player, a tuner or a video player, and it keeps everything tidy behind or beside your amplifier.\u003c\/p\u003e\n\u003cp\u003eConnections are made through nickel plated RCA sockets, known as phono sockets in some UK setups. There are three stereo inputs and one stereo output, which matches the way most home audio gear is wired. The heavy duty push buttons are built to stand up to regular use, and switching between sources is a simple, direct action with no menus or settings to work through.\u003c\/p\u003e\n\u003cp\u003eThe housing is made from black ABS plastic and measures 45 x 134 x 86mm, so it takes up little room on a shelf or in a rack. It weighs 261g. The AD-AUD31 gives channel separation of 60dB at 1kHz and crosstalk of 70dB at 1kHz, which keeps your left and right channels clean when a source is playing. Because it is a passive switch, there is no power supply to plug in and nothing to set up. You just connect your sources, connect the amplifier, and press the button for the source you want.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel separation\u003c\/td\u003e\n\u003ctd\u003e60dB @ 1kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrosstalk\u003c\/td\u003e\n\u003ctd\u003e70dB @ 1kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e3 x stereo RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003e1 x stereo RCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e45mm x 134mm x 86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.26KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128234UK_00f83532-85ee-4ab8-a69a-9ffd1b7195aa.pdf?v=1784963979\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow many audio sources can I connect?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can connect up to three stereo sources, and switch between them using the front push buttons.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connections does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses nickel plated RCA sockets, also called phono sockets, with three stereo inputs and one stereo output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need mains power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It is a passive switch, so there is no power supply or setup required. You just connect your gear and press a button.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat sources can I connect to it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAny stereo source with RCA outputs, such as a DVD player, tuner or video player.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow big is the switch box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures 45 x 134 x 86mm and weighs 261g, so it fits easily on a shelf or in a rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it affect the sound quality?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt gives channel separation of 60dB and crosstalk of 70dB at 1kHz, keeping the left and right channels clean during playback.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270496084235,"sku":"128.234UK","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128234UK_0.jpg?v=1784963997"},{"product_id":"av-link-ad-spk14-4-way-protected-loudspeaker-selector","title":"AV:Link AD-SPK14 4-Way Protected Loudspeaker Selector","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link AD-SPK14 lets you run four pairs of speakers from a single stereo amplifier. You connect the amplifier output to the selector box, then send that signal to up to four different stereo speaker sets in separate rooms or zones. Each set is switched on or off independently using the push-buttons on the front, so you decide where the sound plays and where it stays quiet.\u003c\/p\u003e\n\u003cp\u003eIt's built for practical use. The heavy duty push-buttons handle regular switching, and built-in overload protection guards your amplifier and speakers if things are pushed too hard. The unit works with 4 to 16 ohm speakers and takes up to 140W per channel, which covers most home and light commercial setups. Wiring is straightforward too, with spring clip terminals that accept 14 to 22 gauge cable, so you can connect and change speakers without soldering.\u003c\/p\u003e\n\u003cp\u003eWith one stereo input and four stereo outputs, the AD-SPK14 suits buildings where different rooms need their own sound control, such as shops, offices, bars or a home with music in several areas. It measures 215 x 110 x 45mm and weighs 1.2kg, so it sits neatly on a shelf or near your amplifier and stays put once wired in.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring gauge\u003c\/td\u003e\n\u003ctd\u003e14 to 22 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e1 x stereo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003e4 x stereo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower per channel\u003c\/td\u003e\n\u003ctd\u003e140W max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e215mm x 110mm x 45mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.20KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128425UK_a709f829-f9b1-45d6-a26e-27b030392e41.pdf?v=1784964018\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow many speaker pairs can I connect?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUp to four pairs of stereo speakers can be connected to a single stereo amplifier, and each pair is switched independently.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speaker impedance does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is designed for 4 to 16 ohm speakers, which covers the majority of home and commercial loudspeakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum power per channel?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AD-SPK14 handles up to 140W per channel, so check your amplifier and speaker ratings stay within that limit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe spring clip terminals accept 14 to 22 gauge speaker cable, so no soldering is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it protect my amplifier?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it has built-in overload protection to help guard your amplifier and speakers if the system is overdriven.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I control different rooms separately?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Each of the four outputs is activated by its own push-button, so you can run sound in some rooms and not others.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270496149771,"sku":"128.425UK","price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128425UK_0.jpg?v=1784964036"},{"product_id":"av-link-ad-spk18-8-way-loudspeaker-selector-switch","title":"AV:Link AD-SPK18 8-Way Loudspeaker Selector Switch","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link AD-SPK18 lets you connect up to eight pairs of speakers to a single stereo amplifier. The output from your amplifier feeds into the selector box, which then distributes that signal to as many as eight separate stereo speaker sets around a building. Each pair can be switched on or off independently using the push-buttons on the front panel, so you decide which rooms or zones are playing at any time.\u003c\/p\u003e\n\u003cp\u003eIt's a practical choice for homes, shops, offices and venues where you want sound in different areas without a separate amplifier for each. The heavy duty push-buttons give a firm, positive action, and built-in overload protection helps guard the unit and your amplifier against fault conditions. Spring clip terminals make the wiring straightforward, accepting 14 to 22 gauge speaker cable, and the selector works with speakers rated between 4 and 16 ohms.\u003c\/p\u003e\n\u003cp\u003eWith one stereo input and eight stereo outputs, the AD-SPK18 handles up to 100W per channel. The unit measures 432 x 125 x 55mm and weighs 2.08kg, so it sits neatly on a shelf or in a rack space alongside your other kit. A loudspeaker selector like this gives you simple, independent control over multi-room audio from a single source.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring gauge\u003c\/td\u003e\n\u003ctd\u003e14 to 22 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e1 x stereo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003e8 x stereo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower per channel\u003c\/td\u003e\n\u003ctd\u003e100W max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e432mm x 125mm x 55mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.08KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128428UK_9226f5bf-0a0a-428a-b07f-b72010b1c97c.pdf?v=1784964057\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow many speaker pairs can I connect?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUp to eight pairs of stereo speakers can be connected, each switched on or off independently from the front panel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speaker impedance does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is designed for speakers rated between 4 and 16 ohms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power can it handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AD-SPK18 handles up to 100W per channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable gauge do the terminals accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe spring clip terminals accept speaker cable from 14 to 22 gauge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need its own power supply?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It is a passive selector that routes the signal from your amplifier, so no separate power supply is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I run multiple rooms at once?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. You can activate any combination of the eight outputs at the same time, making it suited to independent sound control across different rooms or zones.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270496182539,"sku":"128.428UK","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128428UK_0.jpg?v=1784964080"},{"product_id":"av-link-dac7-digital-to-analogue-audio-converter","title":"AV:Link DAC7 Digital to Analogue Audio Converter","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link DAC7 takes a digital audio signal and turns it into an analogue one, so you can connect gear that only offers digital output to speakers or headphones that expect standard analogue inputs. It accepts either optical (Toslink) or coaxial digital signals and gives you both RCA (L\/R) phono outputs and a 3.5mm headphone jack, sometimes called a headphone socket. That covers most of the common connection needs in one small box.\u003c\/p\u003e\n\u003cp\u003eWe designed it for situations where a games console, LED TV, projector or Blu-ray player has no RCA or 3.5mm output of its own. It handles a 24-bit S\/PDIF incoming bit stream across the left and right channels, and supports sampling rates of 32, 44.1, 48 and 96 KHz. Setup is plug and play, with instant synchronisation and no delay, so you simply connect your source, connect your output and go.\u003c\/p\u003e\n\u003cp\u003ePower comes from USB, and a USB power lead is supplied in the box. The unit runs on DC 5V through a micro USB input, which means you can draw power from a nearby TV, wall adaptor or similar port rather than needing a separate mains supply. At 62 x 45 x 20mm and 65g it is small and light enough to sit tucked behind your equipment. It is a handy little device for adding analogue audio to kit that was never built to provide it, without any complicated configuration.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e62mm x 45mm x 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.07KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower : input\u003c\/td\u003e\n\u003ctd\u003eDC\/5V (micro USB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connections\u003c\/td\u003e\n\u003ctd\u003eOptical (Toslink), Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connections\u003c\/td\u003e\n\u003ctd\u003eRCA (L\/R), 3.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat inputs and outputs does the DAC7 have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt accepts optical (Toslink) or coaxial digital audio inputs, and gives you RCA (L\/R) phono outputs plus a 3.5mm headphone jack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the converter powered?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt runs on DC 5V through a micro USB input, and a USB power lead is supplied. You can power it from a TV USB port or a mains USB adaptor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat sampling rates does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt supports 32, 44.1, 48 and 96 KHz, with a 24-bit S\/PDIF incoming bit stream on the left and right channels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it useful for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt suits games consoles, LED TVs, projectors and Blu-ray players that only have digital audio output and no RCA or 3.5mm socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to configure anything?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It is plug and play with instant synchronisation, so you connect your source and output and it works straight away.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow big is the unit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures 62 x 45 x 20mm and weighs 65g, so it fits easily behind your equipment.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270496280843,"sku":"128.510UK","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128510UK_0.jpg?v=1784964114"},{"product_id":"av-link-8k-hdmi-audio-extractor-with-vrr-hdr10","title":"AV:Link 8K HDMI Audio Extractor with VRR \u0026 HDR10","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis 8K HDMI audio extractor pulls audio out of a single HDMI source and sends it where you need it. It splits off digital audio via HDMI, Toslink (optical) and coaxial, plus analogue stereo through a 3.5mm jack, while passing the video signal on to your screen. Video resolutions run up to 7680 x 4320 at 60Hz, with a maximum baud rate of 40Gbps and 8\/10\/12 bit deep colour support.\u003c\/p\u003e\n\u003cp\u003eSetup is plug and play, so you connect your source, output and audio device, and the unit syncs without delay. It handles newer formats including Variable Refresh Rate (VRR) and HDR10, which makes it a sensible match for the latest PCs and games consoles. Audio output over HDMI covers PCM2.0, LPCM5.1\/7.1, Dolby Digital, Dolby True HD, Dolby Atmos and the full DTS range up to DTS:X. Optical and coaxial outputs carry LPCM and Dolby Digital up to 5.1, while the 3.5mm jack gives you analogue stereo.\u003c\/p\u003e\n\u003cp\u003ePower comes from the supplied UK mains adaptor at DC5V\/1A, with a USB-C connection handling the input. The housing has a brushed metal finish and measures 121 x 57 x 19mm, weighing 118g, so it sits neatly on a desk or in an AV rack. For best results, keep input cables at 3m or less and output cables at 5m or less when running 8K at 60Hz. It is a straightforward way to separate audio from your source when your amplifier or speakers do not share the same connections as your display.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connections\u003c\/td\u003e\n\u003ctd\u003eHDMI (8K), USB-C (DC\/5V power input)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connections\u003c\/td\u003e\n\u003ctd\u003eHDMI (8K), HDMI (audio only), Optical (Toslink), Coaxial, 3.5mm (Stereo)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo resolution\u003c\/td\u003e\n\u003ctd\u003eUp to 7680 × 4320 @ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003e40Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio output\u003c\/td\u003e\n\u003ctd\u003eHDMI: PCM2.0, LPCM5.1\/7.1, Dolby Digital, Dolby Digital plus, Dolby True HD, Dolby Atmos, DTS 5.1, DTS ES 6.1, DTS HRA, DTS HD Master, DTS:X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio output\u003c\/td\u003e\n\u003ctd\u003eSPDIF\/COAX: LPCM2.0\/5.1, Dolby Digital 2.0\/5.1, DTS2.0\/5.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio output\u003c\/td\u003e\n\u003ctd\u003e3.5mm Jack: Analogue stereo 2.0ch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. cable length\u003c\/td\u003e\n\u003ctd\u003eInput:  8K\/60Hz≤3m, Output: 8K\/60Hz≤5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eInput AC (50HZ, 60HZ) 100V-240V; Output: DC5V\/1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e121mm x 57mm x 19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.12KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo format\u003c\/td\u003e\n\u003ctd\u003e8\/10\/12 bit deep colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128518UK.pdf?v=1784964187\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat audio outputs does it have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt offers HDMI (audio only), optical Toslink, coaxial and a 3.5mm stereo jack, so you can route audio to a range of amplifiers, soundbars and speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it support 8K video?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It passes video up to 7680 x 4320 at 60Hz with a 40Gbps baud rate and 8\/10\/12 bit deep colour, while extracting the audio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with Dolby Atmos?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, Dolby Atmos is supported over the HDMI audio output, along with LPCM5.1\/7.1, Dolby True HD and DTS formats up to DTS:X.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it powered?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA UK mains adaptor is supplied, giving DC5V\/1A. The power connects via the USB-C input on the unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cable lengths does it support at 8K?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor 8K at 60Hz, keep input cables to 3m or less and output cables to 5m or less for a reliable signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for games consoles?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. With VRR and HDR10 support, it suits the latest games consoles and PCs where you want to separate audio from the video feed.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270496411915,"sku":"128.518UK","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128518UK_0.jpg?v=1784964207"},{"product_id":"av-link-ad-spk21-2-way-loudspeaker-selector-switch","title":"AV:Link AD-SPK21 2-Way Loudspeaker Selector Switch","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link AD-SPK21 is a compact loudspeaker selector that lets you connect two pairs of speakers to a single stereo amplifier. You can switch either pair on its own or run both together, which makes it a quick way to add extra speakers or set up basic zoning for a sound system. The unit sits neatly on a shelf or in a rack and gets on with the job without any fuss.\u003c\/p\u003e\n\u003cp\u003eConnections are made using spring clip terminals, so bare speaker wire pushes straight in and holds securely. The selector is designed for 8 ohm speakers. With two pairs of 8 ohm speakers connected, the impedance stays at 8 ohms per channel when a single pair is enabled, or when nothing is switched on. When both channels are enabled, the speakers are linked in series and the impedance rises to 16 ohms, so it is worth keeping that in mind when matching to your amplifier.\u003c\/p\u003e\n\u003cp\u003eEach channel handles up to 50W maximum, which covers most home and small commercial setups. The housing measures 170 x 47 x 117mm and weighs 324g, so it takes up very little space. If you want to run speakers in two rooms from one amp, or simply add a second pair in the same space, the AD-SPK21 gives you straightforward manual control over which pair is playing.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower per channel\u003c\/td\u003e\n\u003ctd\u003e50W max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e170mm x 47mm x 117mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.32KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128559UK_3180e976-17a3-4151-93c2-bb292270e831.pdf?v=1784964227\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow many speaker pairs can I connect?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo pairs of loudspeakers can be connected to the output of a single stereo amplifier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I run both pairs at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. You can select either pair individually or switch both on together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speaker impedance does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is designed for 8 ohm speakers. A single pair enabled gives 8 ohms per channel, while both pairs enabled links them in series for 16 ohms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat type of connections does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses spring clip terminals, which accept bare speaker wire pushed straight in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum power per channel?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach channel handles up to 50W maximum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for zoning a sound system?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It gives a quick, manual way to zone a system or add an extra pair of speakers to one amplifier.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270496477451,"sku":"128.559UK","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128559UK_0.jpg?v=1784964252"},{"product_id":"av-link-ad-spk42-4-way-loudspeaker-selector-switch","title":"AV:Link AD-SPK42 4-Way Loudspeaker Selector Switch","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe AV:Link AD-SPK42 lets you connect up to four pairs of speakers to the stereo output of a single amplifier. You can select any pair on its own or run several together, which makes it a handy way to spread sound across more than one room from one amp. The black casing keeps it discreet on a shelf or in a rack, and the compact size means it won't take up much space.\u003c\/p\u003e\n\u003cp\u003eEach output is controlled by its own heavy-duty rocker switch, so switching a pair on or off is quick and clear. The unit is designed for 8 ohm speakers and handles up to 50W per channel. Connections use spring clip terminals, which take bare speaker wire without the need for extra plugs or tools. This gives you a straightforward setup whether you're wiring in new speakers or adding to an existing system.\u003c\/p\u003e\n\u003cp\u003eWe think this is a practical choice for zoning a sound system or simply adding extra pairs of speakers to one amplifier. The selector measures 170 x 47 x 117mm and weighs 391g, so it sits neatly wherever you need it. With individual and combined selection, you keep full control over which speakers play, letting you tailor the sound to different rooms or listening spots as you go.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAV:Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower per channel\u003c\/td\u003e\n\u003ctd\u003e50W max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e170mm x 47mm x 117mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.39KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow many speakers can I connect?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can connect two or four pairs of speakers to a single amplifier and select any pair individually or all together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat impedance does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AD-SPK42 is designed for 8 ohm speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much power can each channel handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach channel handles up to 50W maximum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat type of connections does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses spring clip terminal connections, which accept bare speaker wire without plugs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it to run speakers in different rooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It's a quick solution for zoning a sound system, letting you select which pair of speakers plays in which area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size is the unit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures 170 x 47 x 117mm and weighs 391g.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270496542987,"sku":"128.562UK","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/128562UK_0.jpg?v=1784964288"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/collections\/128825UK_1.jpg?v=1791130245","url":"https:\/\/niori.co.uk\/collections\/adapters-switching.oembed?page=2","provider":"Niori","version":"1.0","type":"link"}